/[gentoo-x86]/eclass/cvs.eclass
Gentoo

Diff of /eclass/cvs.eclass

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.33 Revision 1.42
1# Copyright 1999-2003 Gentoo Technologies, Inc. 1# Copyright 1999-2003 Gentoo Technologies, Inc.
2# Distributed under the terms of the GNU General Public License v2 2# Distributed under the terms of the GNU General Public License v2
3# $Header: /var/cvsroot/gentoo-x86/eclass/cvs.eclass,v 1.33 2003/03/19 11:54:21 danarmak Exp $ 3# $Header: /var/cvsroot/gentoo-x86/eclass/cvs.eclass,v 1.42 2003/06/13 09:22:47 torbenh Exp $
4# 4#
5# Author Dan Armak <danarmak@gentoo.org> 5# Author Dan Armak <danarmak@gentoo.org>
6# 6#
7# This eclass provides the generic cvs fetching functions. 7# This eclass provides the generic cvs fetching functions.
8# to use from an ebuild, set the 'ebuild-configurable settings' below in your ebuild before inheriting.
9# then either leave the default src_unpack or extend over cvs_src_unpack.
10# if you find that you need to call the cvs_* functions directly, i'd be interested to hear about it.
8 11
9ECLASS=cvs 12ECLASS=cvs
10INHERITED="$INHERITED $ECLASS" 13INHERITED="$INHERITED $ECLASS"
11 14
12# You shouldn't change these settings yourself! The ebuild/eclass inheriting this eclass 15# You shouldn't change these settings yourself! The ebuild/eclass inheriting this eclass
18# cvs command to run. you can set fex. "cvs -t" for extensive debug information 21# cvs command to run. you can set fex. "cvs -t" for extensive debug information
19# on the cvs onnection. the default of "cvs -q -f -z4" means to be quiet, to disregard 22# on the cvs onnection. the default of "cvs -q -f -z4" means to be quiet, to disregard
20# the ~/.cvsrc config file and to use maximum compression. 23# the ~/.cvsrc config file and to use maximum compression.
21[ -z "$ECVS_CVS_COMMAND" ] && ECVS_CVS_COMMAND="cvs -q -f -z4" 24[ -z "$ECVS_CVS_COMMAND" ] && ECVS_CVS_COMMAND="cvs -q -f -z4"
22 25
23# cvs options given after the command (i.e. cvs update foo) 26# cvs options given after the cvs command (update or checkout)
24# don't remove -dP or things won't work 27# don't remove -dP from update or things won't work
28[ -z "$ECVS_UP_OPTS" ] && ECVS_UP_OPTS="-dP"
25[ -z "$ECVS_CVS_OPTIONS" ] && ECVS_CVS_OPTIONS="-dP" 29[ -z "$ECVS_CO_OPTS" ] && ECVS_CO_OPTS=""
26 30
27# set this for the module/subdir to be fetched non-recursively 31# set this to some value for the module/subdir to be fetched non-recursively: ECVS_LOCAL
28#[ -n "$ECVS_LOCAL" ] && ECVS_CVS_OPTIONS="$ECVS_CVS_OPTIONS -l"
29 32
30# Where the cvs modules are stored/accessed 33# Where the cvs modules are stored/accessed
31[ -z "$ECVS_TOP_DIR" ] && ECVS_TOP_DIR="${DISTDIR}/cvs-src" 34[ -z "$ECVS_TOP_DIR" ] && ECVS_TOP_DIR="${DISTDIR}/cvs-src"
32 35
33# Name of cvs server, set to "offline" to disable fetching 36# Name of cvs server, set to "offline" to disable fetching
34# (i.e. to assume module is checked out already and don't update it). 37# (i.e. to assume module is checked out already and don't update it).
35# Format is server:/dir e.g. "anoncvs.kde.org:/home/kde". remove the other 38# Format is server:/dir e.g. "anoncvs.kde.org:/home/kde". remove the other
36# parts of the full CVSROOT (which looks like 39# parts of the full CVSROOT (which looks like
37# ":pserver:anonymous@anoncvs.kde.org:/home/kde"); these are added from 40# ":pserver:anonymous@anoncvs.kde.org:/home/kde"); these are added from
38# other settings 41# other settings
42# the special value 'offline' disables fetching, assumes sources are alread in ECVS_TOP_DIR
39[ -z "$ECVS_SERVER" ] && ECVS_SERVER="offline" 43[ -z "$ECVS_SERVER" ] && ECVS_SERVER="offline"
40 44
41# Anonymous cvs login?
42# if 'yes' uses :pserver: with empty password, if 'no' uses :ext: with $ECVS_PASS, other values not allowed
43[ -z "$ECVS_ANON" ] && ECVS_ANON="yes"
44
45# Authentication method to use on ECVS_ANON="no" - possible values are "pserver" and "ext" 45# Authentication method to use - possible values are "pserver" and "ext"
46# WARNING ext is NOT supported! (never was, despite what earlier version of this file said)
46[ -z "$ECVS_AUTH" ] && ECVS_AUTH="ext" 47[ -z "$ECVS_AUTH" ] && ECVS_AUTH="pserver"
48[ "$ECVS_AUTH" == ext ] && die "ERROR: ext auth not supported. If you want it, please contact danarmak@gentoo.org."
47 49
48# Use su to run cvs as user 50# Use su to run cvs as user
51# Currently b0rked and wouldn't work with portage userpriv anyway without special magic
49[ -z "$ECVS_RUNAS" ] && ECVS_RUNAS="`whoami`" 52# [ -z "$ECVS_RUNAS" ] && ECVS_RUNAS="`whoami`"
50 53
51# Username to use 54# Username to give to the server
52[ -z "$ECVS_USER" ] && ECVS_USER="anonymous" 55[ -z "$ECVS_USER" ] && ECVS_USER="anonymous"
53 56
54# Password to use if anonymous login is off, or if 'anonymous' pserver access 57# Password to use
55# uses a password and ECVS_ANON = yes
56[ -z "$ECVS_PASS" ] && ECVS_PASS="" 58[ -z "$ECVS_PASS" ] && ECVS_PASS=""
57 59
58# Module to be fetched, must be set explicitly - 60# Module to be fetched, must be set when kde_src_unpack is called
59# I don't like the former ="$PN" default setting 61# can include several directory levels, ie foo/bar/baz
60[ -z "$ECVS_MODULE" ] && debug-print "$ECLASS: error: ECVS_MODULE not set, cannot continue" 62#[ -z "$ECVS_MODULE" ] && die "$ECLASS: error: ECVS_MODULE not set, cannot continue"
61 63
62# Branch/tag to use, default is HEAD 64# Branch/tag to use, default is HEAD
63# uncomment the following line to enable the reset-branch-to-HEAD behaviour 65# the following default _will_ reset your branch checkout to head if used
64[ -z "$ECVS_BRANCH" ] && ECVS_BRANCH="HEAD" 66#[ -z "$ECVS_BRANCH" ] && ECVS_BRANCH="HEAD"
65 67
66# Subdirectory in module to be fetched, default is not defined = whole module 68# deprecated - do not use
67# DO NOT set default to "", if it's defined at all code will break! 69[ -n "$ECVS_SUBDIR" ] && die "ERROR: deprecated ECVS_SUBDIR defined. Please fix this ebuild."
68# don't uncomment following line!
69#[ -z "$ECVS_SUBDIR" ] && ECVS_SUBDIR=""
70 70
71# --- end ebuild-configurable settings --- 71# --- end ebuild-configurable settings ---
72 72
73# add cvs to deps 73# add cvs to deps
74DEPEND="$DEPEND dev-util/cvs dev-python/pexpect" 74# ssh is used for ext auth
75# sudo is used to run as a specified user
76DEPEND="$DEPEND dev-util/cvs app-admin/sudo"
77#[ "$ECVS_AUTH" == "ext" ] && DEPEND="$DEPEND net-misc/openssh"
75 78
76# since we now longer have src_fetch as a redefinable ebuild function, 79# calls cvs_contorl, is called from cvs_src_unpack
77# we are forced to call this function from cvs_src_unpack
78cvs_fetch() { 80cvs_fetch() {
79 81
82 # fix for sourceforge which doesnt want -z>3 anymore.
83
84 (echo $ECVS_SERVER | grep sourceforge) && [ "$ECVS_CVS_COMMAND" == "cvs -q -f -z4" ] && ECVS_CVS_COMMAND="cvs -q -f -z3"
85
80 debug-print-function $FUNCNAME $* 86 debug-print-function $FUNCNAME $*
81 87
82 debug-print "$FUNCNAME: init: 88 # parameters modifying other parameters that should be effective every time cvs_fetch is called,
839ECVS_CVS_COMMAND=$ECVS_CVS_COMMAND 89 # and not just every time cvs.eclas is inherited
84ECVS_CVS_OPTIONS=$ECVS_CVS_OPTIONS 90 # 1. parameter for local (non-recursive) fetching
85ECVS_TOP_DIR=$ECVS_TOP_DIR 91 if [ -n "$ECVS_LOCAL" ]; then
86ECVS_SERVER=$ECVS_SERVER 92 ECVS_UP_OPTS="$ECVS_UP_OPTS -l"
87ECVS_ANON=$ECVS_ANON 93 ECVS_CO_OPTS="$ECVS_CO_OPTS -l"
88ECVS_USER=$ECVS_USER 94 fi
89ECVS_PASS=$ECVS_PASS 95 # 2. cvs auto-switches branches, we just have to pass the correct -rBRANCH option to it when updating.
90ECS_MODULE=$ECVS_MODULE 96 # doing it this way we get multiple -rX options - harmless afaik
91ECVS_SUBDIR=$ECVS_SUBDIR 97 if [ -n "$ECVS_BRANCH" ]; then
92ECVS_LOCAL=$ECVS_LOCAL 98 ECVS_UP_OPTS="$ECVS_UP_OPTS -r$ECVS_BRANCH"
93DIR=$DIR" 99 ECVS_CO_OPTS="$ECVS_CO_OPTS -r$ECVS_BRANCH"
100 fi
94 101
95 # a shorthand 102 # it's easiest to always be in "run-as mode", logic-wise
96 DIR="${ECVS_TOP_DIR}/${ECVS_MODULE}/${ECVS_SUBDIR}" 103 # or would be if sudo didn't ask for a password even when sudo'ing to `whoami`
97 debug-print "$FUNCNAME: now DIR=$DIR" 104 if [ -z "$ECVS_RUNAS" ]; then
98 105 run=""
99 if [ "$ECVS_SERVER" == "offline" ]; then
100 # we're not required to fetch anything, the module already exists and shouldn't be updated
101 if [ -d "$DIR" ]; then
102 debug-print "$FUNCNAME: offline mode, exiting"
103 return 0
104 else 106 else
105 einfo "ERROR: Offline mode specified, but module/subdir not found. Aborting." 107 run="sudo -u $ECVS_RUNAS"
106 debug-print "$FUNCNAME: offline mode specified but module/subdir not found, exiting with error"
107 return 1
108 fi 108 fi
109 fi
110 109
111 # create target directory as needed 110 # create the top dir if needed
112 if [ ! -d "$DIR" ]; then 111 if [ ! -d "$ECVS_TOP_DIR" ]; then
112 # note that the addwrite statements in this block are only there to allow creating ECVS_TOP_DIR;
113 # we've already allowed writing inside it
114 # this is because it's simpler than trying to find out the parent path of the directory, which
115 # would need to be the real path and not a symlink for things to work (so we can't just remove
116 # the last path element in the string)
113 debug-print "$FUNCNAME: creating cvs directory $DIR" 117 debug-print "$FUNCNAME: checkout mode. creating cvs directory"
114 #export SANDBOX_WRITE="$SANDBOX_WRITE:/foobar:/"
115 addwrite /foobar 118 addwrite /foobar
116 addwrite / 119 addwrite /
117 mkdir -p "/$DIR" 120 $run mkdir -p "/$ECVS_TOP_DIR"
118 export SANDBOX_WRITE="${SANDBOX_WRITE//:\/foobar:\/}" 121 export SANDBOX_WRITE="${SANDBOX_WRITE//:\/foobar:\/}"
119 fi 122 fi
120 123
121 # in case ECVS_TOP_DIR is a symlink to a dir, get the real dir's path, 124 # in case ECVS_TOP_DIR is a symlink to a dir, get the real dir's path,
122 # otherwise addwrite() doesn't work. 125 # otherwise addwrite() doesn't work.
123 cd -P "$ECVS_TOP_DIR" > /dev/null 126 cd -P "$ECVS_TOP_DIR" > /dev/null
124 ECVS_TOP_DIR="`/bin/pwd`" 127 ECVS_TOP_DIR="`/bin/pwd`"
125 DIR="${ECVS_TOP_DIR}/${ECVS_MODULE}/${ECVS_SUBDIR}" 128
126 cd "$OLDPWD" 129 # determine checkout or update mode
127 130 if [ ! -d "$ECVS_TOP_DIR/$ECVS_MODULE/CVS" ]; then
128 debug-print "$FUNCNAME: now DIR=$DIR" 131 mode=checkout
129 132 else
133 mode=update
134 fi
135
130 # disable the sandbox for this dir 136 # disable the sandbox for this dir
131 # not just $DIR because we want to create moduletopdir/CVS too 137 addwrite "$ECVS_TOP_DIR"
138
139 # chowning the directory and all contents
140 if [ -n "$ECVS_RUNAS" ]; then
141 $run chown -R "$ECVS_RUNAS" "/$ECVS_TOP_DIR"
142 fi
143
144 # our server string (aka CVSROOT), without the password so it can be put in Root
145 server=":${ECVS_AUTH}:${ECVS_USER}@${ECVS_SERVER}"
146
147 # switch servers automagically if needed
148 if [ "$mode" == "update" ]; then
132 addwrite "$ECVS_TOP_DIR/$ECVS_MODULE" 149 cd /$ECVS_TOP_DIR/$ECVS_MODULE
150 oldserver="`$run cat CVS/Root`"
151 if [ "$server" != "$oldserver" ]; then
133 152
134 # add option for local (non-recursive) fetching 153 einfo "Changing CVS server from $oldserver to $server:"
135 [ -n "$ECVS_LOCAL" ] && ECVS_CVS_OPTIONS="$ECVS_CVS_OPTIONS -l" 154 debug-print "$FUNCNAME: Changing CVS server from $oldserver to $server:"
136 155
156 einfo "Searching for CVS dirs..."
157 cvsdirs="`$run find . -iname CVS -print`"
158 debug-print "$FUNCNAME: CVS dirs found:"
159 debug-print "$cvsdirs"
160
161 einfo "Modifying CVS dirs..."
162 for x in $cvsdirs; do
163 debug-print "In $x"
164 $run echo "$server" > "$x/Root"
165 done
166
167 fi
168 fi
169
137 # prepare a cvspass file just for this session, we don't want to mess with ~/.cvspass 170 # prepare a cvspass file just for this session, we don't want to mess with ~/.cvspass
138 touch "${T}/cvspass" 171 touch "${T}/cvspass"
139 export CVS_PASSFILE="${T}/cvspass" 172 export CVS_PASSFILE="${T}/cvspass"
173 if [ -n "$ECVS_RUNAS" ]; then
140 chown $ECVS_RUNAS "${T}/cvspass" 174 chown "$ECVS_RUNAS" "${T}/cvspass"
175 fi
141 176
142 # Note: cvs update and checkout commands are unified. 177 # the server string with the password in it, for login
143 # we make sure a CVS/ dir exists in our module subdir with the right 178 cvsroot_pass=":${ECVS_AUTH}:${ECVS_USER}:${ECVS_PASS}@${ECVS_SERVER}"
144 # Root and Repository entries in it and cvs update. 179 # ditto without the password, for checkout/update after login, so that
145 180 # the CVS/Root files don't contain the password in plaintext
146 [ "${ECVS_ANON}" == "yes" ] && \
147 newserver=":pserver:${ECVS_USER}@${ECVS_SERVER}" || \
148 newserver=":${ECVS_AUTH}:${ECVS_USER}@${ECVS_SERVER}" 181 cvsroot_nopass=":${ECVS_AUTH}:${ECVS_USER}@${ECVS_SERVER}"
149 182
150 183 # commands to run
151 # CVS/Repository files can't (I think) contain two concatenated slashes 184 cmdlogin="${run} ${ECVS_CVS_COMMAND} -d \"${cvsroot_pass}\" login"
185 cmdupdate="${run} ${ECVS_CVS_COMMAND} -d \"${cvsroot_nopass}\" update ${ECVS_UP_OPTS} ${ECVS_MODULE}"
186 cmdcheckout="${run} ${ECVS_CVS_COMMAND} -d \"${cvsroot_nopass}\" checkout ${ECVS_CO_OPTS} ${ECVS_MODULE}"
187
188 cd "${ECVS_TOP_DIR}"
189 if [ "${ECVS_AUTH}" == "pserver" ]; then
190 einfo "Running $cmdlogin"
191 eval $cmdlogin || die "cvs login command failed"
192 if [ "${mode}" == "update" ]; then
193 einfo "Running $cmdupdate"
194 eval $cmdupdate || die "cvs update command failed"
195 elif [ "${mode}" == "checkout" ]; then
196 einfo "Running $cmdcheckout"
197 eval $cmdcheckout|| die "cvs checkout command failed"
198 fi
199# elif [ "${ECVS_AUTH}" == "ext" ]; then
200# # for ext there's also a possible ssh prompt, code not yet written
201# echo "${ECVS_DELAY} continue connecting&yes" >> "$instruct"
202# echo "${ECVS_DELAY} CVS password:&${ECVS_PASS}" >> "$instruct"
203# if [ "$mode" == "update" ]; then
204# expect "$cvsout" "$instruct" | $cmdupdate > "$cvsout"
205# elif [ "$mode" == "checkout" ]; then
206# expect "$cvsout" "$instruct" | $cmdcheckout > "$cvsout"
207# fi
208 fi
209
210 # restore ownership. not sure why this is needed, but someone added it in the orig ECVS_RUNAS stuff.
152 if [ -n "$ECVS_SUBDIR" ]; then 211 if [ -n "$ECVS_RUNAS" ]; then
153 repository="${ECVS_MODULE}/${ECVS_SUBDIR}" 212 chown `whoami` "${T}/cvspass"
213 fi
214
215}
216
217
218cvs_src_unpack() {
219
220 debug-print-function $FUNCNAME $*
221
222 debug-print "$FUNCNAME: init:
223ECVS_CVS_COMMAND=$ECVS_CVS_COMMAND
224ECVS_UP_OPTS=$ECVS_UP_OPTS
225ECVS_CO_OPTS=$ECVS_CO_OPTS
226ECVS_TOP_DIR=$ECVS_TOP_DIR
227ECVS_SERVER=$ECVS_SERVER
228ECVS_USER=$ECVS_USER
229ECVS_PASS=$ECVS_PASS
230ECS_MODULE=$ECVS_MODULE
231ECVS_LOCAL=$ECVS_LOCAL
232ECVS_RUNAS=$ECVS_RUNAS"
233
234 [ -z "$ECVS_MODULE" ] && die "ERROR: CVS module not set, cannot continue."
235
236 if [ "$ECVS_SERVER" == "offline" ]; then
237 # we're not required to fetch anything, the module already exists and shouldn't be updated
238 if [ -d "${ECVS_TOP_DIR}/${ECVS_MODULE}" ]; then
239 debug-print "$FUNCNAME: offline mode"
240 else
241 debug-print "$FUNCNAME: offline mode specified but directory ${ECVS_TOP_DIR}/${ECVS_MODULE} not found, exiting with error"
242 die "ERROR: Offline mode specified, but dir ${ECVS_TOP_DIR}/${ECVS_MODULE} not found. Aborting."
243 fi
244 elif [ -n "$ECVS_SERVER" ]; then # ECVS_SERVER!=offline --> real fetching mode
245 einfo "Fetching cvs module $ECVS_MODULE into $ECVS_TOP_DIR..."
246 cvs_fetch
247 else # ECVS_SERVER not set
248 die "ERROR: CVS server not set, cannot continue."
249 fi
250
251 einfo "Copying $ECVS_MODULE from $ECVS_TOP_DIR..."
252 debug-print "Copying module $ECVS_MODULElocal_mode=$ECVS_LOCAL from $ECVS_TOP_DIR..."
253
254 # probably redundant, but best to make sure
255 mkdir -p "$WORKDIR/$ECVS_MODULE"
256
257 if [ -n "$ECVS_LOCAL" ]; then
258 mkdir -p "$WORKDIR/$ECVS_MODULE"
259 cp -f "$ECVS_TOP_DIR/$ECVS_MODULE"/* "$WORKDIR/$ECVS_MODULE"
154 else 260 else
155 repository="${ECVS_MODULE}"
156 fi
157
158 debug-print "$FUNCNAME: Root<-$newserver, Repository<-$repository"
159 debug-print "$FUNCNAME: entering directory $DIR"
160 cd "/$DIR"
161
162 if [ ! -d "CVS" ]; then
163 # create a new CVS/ directory (checkout)
164 debug-print "$FUNCNAME: creating new cvs directory"
165
166 mkdir CVS
167 echo $newserver > CVS/Root
168 echo $repository > CVS/Repository
169 touch CVS/Entries
170
171 # if we're checking out a subdirectory only, create a CVS/ dir
172 # in the module's top dir so that the user (and we) can cvs update
173 # from there to get the full module.
174 if [ ! -d "$ECVS_TOP_DIR/$ECVS_MODULE/CVS" ]; then
175 debug-print "$FUNCNAME: Copying CVS/ directory to module top-level dir"
176 cp -r CVS "$ECVS_TOP_DIR/$ECVS_MODULE/"
177 echo $ECVS_MODULE > "$ECVS_TOP_DIR/$ECVS_MODULE/CVS/Repository"
178 fi
179
180 else
181 #update existing module
182 debug-print "$FUNCNAME: updating existing module/subdir"
183
184 # Switch servers if needed
185 # cvs keeps the server info in the CVS/Root file in every checked-out dir;
186 # we can fix those files to point to the new server
187 oldserver="`cat CVS/Root`"
188 if [ "$newserver" != "$oldserver" ]; then
189
190 einfo "Changing CVS server from $oldserver to $newserver:"
191 debug-print "$FUNCNAME: Changing CVS server from $oldserver to $newserver:"
192
193 einfo "Searching for CVS dirs..."
194 cvsdirs="`find . -iname CVS -print`"
195 debug-print "$FUNCNAME: CVS dirs found:"
196 debug-print "$cvsdirs"
197
198 einfo "Modifying CVS dirs..."
199 for x in $cvsdirs; do
200 debug-print "In $x"
201 echo $newserver > "$x/Root"
202 done
203
204 fi
205
206 fi
207
208 # cvs auto-switches branches, how nice
209 # warning: if we do it this way we get multiple -rX options - harmless i think
210 [ -n "$ECVS_BRANCH" ] && ECVS_CVS_OPTIONS="$ECVS_CVS_OPTIONS -r$ECVS_BRANCH"
211
212 # Chowning the directory
213 if [ "${ECVS_RUNAS}" != "`whoami`" ]; then
214 chown -R "$ECVS_RUNAS" "/$DIR"
215 fi
216
217 # finally run the cvs update command
218 debug-print "$FUNCNAME: is in dir `/bin/pwd`"
219 debug-print "$FUNCNAME: running $ECVS_CVS_COMMAND update $ECVS_CVS_OPTIONS with $ECVS_SERVER for module $ECVS_MODULE subdir $ECVS_SUBDIR"
220 einfo "Running $ECVS_CVS_COMMAND update $ECVS_CVS_OPTIONS with $ECVS_SERVER for $ECVS_MODULE/$ECVS_SUBDIR..."
221
222 if [ "${ECVS_ANON}" == "no" ]; then
223
224 debug-print "$FUNCNAME: starting non-anonymous cvs login..."
225 # CVS Login - written in python :: the right way ;)
226 # Tilman Klar, <phoenix@gentoo.org>
227
228 export CVS_RSH="/usr/bin/ssh"
229
230############################## inline-python #####################################
231/usr/bin/env python << EndOfFile
232
233import pexpect,os
234
235mypasswd = "${ECVS_PASS}"
236myauth = "${ECVS_AUTH}"
237mytimeout = 10
238
239if "${ECVS_RUNAS}" == "`whoami`":
240 mycommand = "${ECVS_CVS_COMMAND} update ${ECVS_CVS_OPTIONS}"
241else:
242 mycommand = "su ${ECVS_RUNAS} -c \"${ECVS_CVS_COMMAND} update ${ECVS_CVS_OPTIONS}\""
243
244if myauth == "ext":
245 child = pexpect.spawn(mycommand)
246
247 index = child.expect(['continue connecting','word:'], mytimeout)
248 if index == 0:
249 child.sendline('yes')
250 ## Added server to ~/.ssh/known_hosts
251 child.expect('word:', mytimeout)
252 else:
253 ## Server already is in ~/.ssh/known_hosts
254 pass
255
256 child.sendline(mypasswd)
257 child.expect(pexpect.EOF)
258
259elif myauth == "pserver":
260 if "${ECVS_RUNAS}" == "`whoami`":
261 mycommand2 = "cvs login"
262 else:
263 mycommand2 = "su ${ECVS_RUNAS} -c \"cvs login\""
264 child = pexpect.spawn(mycommand2)
265 child.expect("CVS password:",mytimeout)
266 child.sendline(mypasswd)
267 child.expect(pexpect.EOF)
268
269 # Logged in - checking out
270 os.system(mycommand)
271
272EndOfFile
273########################### End of inline-python ##################################
274 else
275 # is anonymous cvs.
276 # is there a password to use for login with this "anonymous" login
277 if [ -n "$ECVS_PASS" ]; then
278 debug-print "$FUNCNAME: using anonymous cvs login with password"
279
280# inline-python #
281/usr/bin/env python << EndOfFile
282
283import pexpect,os
284
285myuser = "${ECVS_USER}"
286mypasswd = "${ECVS_PASS}"
287
288mytimeout = 10
289
290# implicitly myauth == "pserver" here.
291mycommand = "cvs login"
292child = pexpect.spawn(mycommand)
293child.expect("CVS password:",mytimeout)
294child.sendline(mypasswd)
295child.expect(pexpect.EOF)
296EndOfFile
297# End of inline-python #
298
299 else
300 debug-print "$FUNCNAME: using anonymous cvs login (without password)"
301 # passwordless, truly anonymous login; or login with empty (but existing)
302 # password.
303 # make cvs think we're logged in at the cvs server,
304 # because i don't trust myself to write the right code for the case
305 # where the password is empty but still required (what's the bash test
306 # to see if a variable is defined? -n returns false if it is defined
307 # but empty...)
308 echo ":pserver:${ECVS_SERVER} A" > "${T}/cvspass"
309 # remember we did this so we don't try to run cvs logout later
310 DONT_LOGOUT=yes
311 fi
312
313 debug-print "$FUNCNAME: running $ECVS_CVS_COMMAND update $ECVS_CVS_OPTIONS"
314 $ECVS_CVS_COMMAND update $ECVS_CVS_OPTIONS || die "died running cvs update"
315
316 fi
317
318 # log out and restore ownership as needed
319 if [ -z "$DONT_LOGOUT" ]; then
320 debug-print "$FUNCNAME: cvs logout stuff"
321 if [ "$ECVS_RUNAS" == "`whoami`" ]; then
322 cvs logout &> /dev/null
323 else
324 su $ECVS_RUNAS -c "cvs logout" &> /dev/null
325 fi
326 fi
327 chown `whoami` "${T}/cvspass"
328}
329
330cvs_src_unpack() {
331
332 debug-print-function $FUNCNAME $*
333 cvs_fetch || die "died running cvs_fetch"
334
335 einfo "Copying $ECVS_MODULE/$ECVS_SUBDIR from $ECVS_TOP_DIR..."
336 debug-print "Copying module $ECVS_MODULE subdir $ECVS_SUBDIR local_mode=$ECVS_LOCAL from $ECVS_TOP_DIR..."
337
338 # probably redundant, but best to make sure
339 mkdir -p "$WORKDIR/$ECVS_MODULE/$ECVS_SUBDIR"
340
341 if [ -n "$ECVS_SUBDIR" ]; then
342 if [ -n "$ECVS_LOCAL" ]; then
343 cp -f "$ECVS_TOP_DIR/$ECVS_MODULE/$ECVS_SUBDIR"/* "$WORKDIR/$ECVS_MODULE/$ECVS_SUBDIR"
344 else
345 cp -Rf "$ECVS_TOP_DIR/$ECVS_MODULE/$ECVS_SUBDIR" "$WORKDIR/$ECVS_MODULE/$ECVS_SUBDIR/.."
346 fi
347 else
348 if [ -n "$ECVS_LOCAL" ]; then
349 cp -f "$ECVS_TOP_DIR/$ECVS_MODULE"/* $WORKDIR/$ECVS_MODULE 261 cp -Rf "$ECVS_TOP_DIR/$ECVS_MODULE" "$WORKDIR/$ECVS_MODULE/.."
350 else
351 cp -Rf "$ECVS_TOP_DIR/$ECVS_MODULE" "$WORKDIR"
352 fi 262 fi
353 fi 263
354
355 # if the directory is empty, remove it; empty directories cannot exist in cvs. 264 # if the directory is empty, remove it; empty directories cannot exist in cvs.
356 # this happens when fex. kde-source requests module/doc/subdir which doesn't exist. 265 # this happens when fex. kde-source requests module/doc/subdir which doesn't exist.
357 # still create the empty directory in workdir though. 266 # still create the empty directory in workdir though.
358 if [ "`ls -A \"$DIR\"`" == "CVS" ]; then 267 if [ "`ls -A \"${ECVS_TOP_DIR}/${ECVS_MODULE}\"`" == "CVS" ]; then
359 debug-print "$FUNCNAME: removing cvs-empty directory $ECVS_MODULE/$ECVS_SUBDIR" 268 debug-print "$FUNCNAME: removing cvs-empty directory $ECVS_MODULE"
360 rm -rf "$DIR" 269 rm -rf "${ECVS_TOP_DIR}/${ECVS_MODULE}"
361 fi 270 fi
362 271
363 # implement some of base_src_unpack's functionality; 272 # implement some of base_src_unpack's functionality;
364 # note however that base.eclass may not have been inherited! 273 # note however that base.eclass may not have been inherited!
365 if [ -n "$PATCHES" ]; then 274 if [ -n "$PATCHES" ]; then
366 debug-print "$FUNCNAME: PATCHES=$PATCHES, S=$S, autopatching" 275 debug-print "$FUNCNAME: PATCHES=$PATCHES, S=$S, autopatching"
367 cd "$S" 276 cd "$S"

Legend:
Removed from v.1.33  
changed lines
  Added in v.1.42

  ViewVC Help
Powered by ViewVC 1.1.20