gentoo-x86/eclass/gdesklets.eclass

# Copyright 2004-2006 Gentoo Foundation
# Distributed under the terms of the GNU General Public License, v2 or later
# $Header: /var/cvsroot/gentoo-x86/eclass/gdesklets.eclass,v 1.14 2006/05/26 04:18:43 nixphoeni Exp $
#
# Authors:      Joe Sapp <nixphoeni@gentoo.org>
#               Mike Gardiner <obz@gentoo.org>
#
# Usage:
# As a writer for an ebuild for gDesklets, you should set a few things:
#
#       DESKLET_NAME: The name of the desklet.
#       DOCS: Anything (like a README) that should be dodoc'd.
#       S: *Optional* The package's base directory.
#               Usually ${WORKDIR}/${DESKLET_NAME} if it was packaged
#               correctly (hence, this is the default).
#       RDEPEND: *Optional* Set if the desklet requires a minimum version
#               of gDesklets greater than 0.34 or other packages.

inherit eutils multilib python


MY_P="${DESKLET_NAME}-${PV}"
S=${WORKDIR}/${DESKLET_NAME}

SRC_URI="http://gdesklets.gnomedesktop.org/files/${MY_P}.tar.gz"

# Ebuild writer shouldn't need to touch these (except maybe $RDEPEND)
SLOT="0"
IUSE=""
RDEPEND=">=gnome-extra/gdesklets-core-0.34.3-r1"

GDESKLETS_INST_DIR="${ROOT}usr/$(get_libdir)/gdesklets"

gdesklets_src_install() {

        debug-print-function $FUNCNAME $*

        # Disable compilation of included python modules (Controls)
        python_disable_pyc

        # Do not remove - see bugs 126890 and 128289
        addwrite "${ROOT}/root/.gnome2"

        has_version ">=gnome-extra/gdesklets-core-0.33.1" || \
                                GDESKLETS_INST_DIR="/usr/share/gdesklets"

        # This should be done by the gdesklets-core ebuild
        # It makes the Displays or Controls directory in the
        # global installation directory if it doesn't exist
        [[ -d "${GDESKLETS_INST_DIR}/Displays" ]] || \
                dodir "${GDESKLETS_INST_DIR}/Displays"

        # The displays only need to be readable
        insopts -m0744

        # Check to see if DISPLAY is set for the
        # gdesklets-control-getid script to run without
        # error
        [ -z "${DISPLAY}" ] && DISPLAY=""
        export DISPLAY

        debug-print-section sensor_install
        # First, install the Sensor (if there is one)
        if [[ -n "${SENSOR_NAME}" ]]; then
                for SENS in ${SENSOR_NAME[@]}; do
                        einfo "Installing Sensor ${SENS}"
                        /usr/bin/python "Install_${SENS}_Sensor.bin" \
                                        --nomsg ${D}${GDESKLETS_INST_DIR}/Sensors || \
                                        die "Couldn't Install Sensor"

                        chown -R root:0 ${D}${GDESKLETS_INST_DIR}/Sensors/${SENSOR_NAME}
                done # for in ${SENSOR_NAME}
        fi # if -n "${SENSOR_NAME}"

        debug-print-section display_install
        # This finds the Displays
        DISPLAY_FILES=(`find . -iname "*.display"`)

        DESKLET_INSDIR=""

        # There is most likely only one display per package
        if [[ -n "${DISPLAY_FILES[@]}" ]]; then
                # Base installation directory for displays from this desklet
                DESKLET_INSDIR="${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"

                # This creates the subdirectory of ${DESKLET_NAME}
                # in the global Displays directory
                [[ -d "${DESKLET_INSDIR}" ]] || \
                        dodir "${DESKLET_INSDIR}"

                # For each of the Display files, there may be
                # scripts included inline which don't necessarily
                # follow any naming scheme.
                # So for each of them, determine what those scripts are
                # and install them.
                for DSP in ${DISPLAY_FILES[@]}; do

                        cd `dirname ${DSP}`
                        einfo "Installing Display `basename ${DSP} .display`"
                        debug-print "Installing ${DSP} into ${DESKLET_INSDIR}"
                        DSP=`basename ${DSP}`
                        insinto "${DESKLET_INSDIR}"
                        doins ${DSP}

                        SCRIPTS=$(grep "script .*uri" ${DSP} | \
                                sed -e 's:.*<script .*uri=": :g' -e 's:"/>.*: :g')

                        # For each one of the scripts, change to its
                        # base directory and change the install location
                        # so it gets installed at the proper place
                        # relative to the display.
                        for SCR in ${SCRIPTS[@]}; do

                                insinto "${DESKLET_INSDIR}/`dirname ${SCR}`"
                                doins "${SCR}"
                                debug-print "Installed ${SCR} into ${DESKLET_INSDIR}/`dirname ${SCR}`"

                        done # for in ${SCRIPTS}

                        # Install the graphics for this display.
                        # If there are multiple displays in this
                        # directory, this will be done more than
                        # once.  It's the only solution I can
                        # come up with for now...
                        GFX=(`find . \
                                        -iname "*.png" -o -iname "*.svg" \
                                        -o -iname "*.jpg" -o -iname "*.gif" \
                                        -o -iname "*.xcf"`)

                        for G in ${GFX[@]}; do

                                insinto "${DESKLET_INSDIR}/`dirname ${G}`"
                                doins "${G}"
                                debug-print "Installed ${G} into ${DESKLET_INSDIR}/`dirname ${G}`"

                        done # for in ${GFX}

                        cd "${S}"

                done # for in ${DISPLAY_FILES}

        fi

        debug-print-section control_install

        CONTROL_INSDIR=""

        # Make sure that it only finds Controls and not Sensors
        # If it uses a Sensor, it shouldn't use a Control (since
        # Sensors are deprecated).
        if [[ -z "${SENSOR_NAME}" ]]; then

                # Base installation directory for Controls
                CONTROL_INSDIR="${GDESKLETS_INST_DIR}/Controls"

                CONTROL_INITS=$(find . -iname "__init__.py" | grep [Cc]ontrols)

                # There are possibly multiple Controls packaged with the display.
                # For each __init__.py found, there must be a Control associated with it.
                for CTRL in ${CONTROL_INITS[@]}; do

                        cd `dirname ${CTRL}`
                        CTRL_NAME=$( ${GDESKLETS_INST_DIR}/gdesklets-control-getid `pwd` )
                        einfo "Installing Control ${CTRL_NAME}"
                        # This creates the subdirectory of ${CTRL_NAME}
                        # in the global Controls directory
                        [[ -d "${CONTROL_INSDIR}/${CTRL_NAME}" ]] || \
                                dodir "${CONTROL_INSDIR}/${CTRL_NAME}"

                        insinto "${CONTROL_INSDIR}/${CTRL_NAME}"

                        doins -r *

                        cd "${S}"

                done # for in ${CONTROL_INITS}

        fi # if no Sensors

        # Install any remaining graphics and other files
        # that are sitting in ${S}.

        GFX=$(find . -maxdepth 1 \
                -iname "*.png" -o -iname "*.svg" \
                -o -iname "*.jpg" -o -iname "*.gif" \
                -o -iname "*.xcf")

        if [[ -n "${GFX}" ]]; then

                # Install to the Displays directory of the Desklet
                insinto "${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"
                doins "${GFX}"
                debug-print "Installed ${GFX} into ${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"

        fi # if -n "${GFX}"

        # Install some docs if so requested
        [[ -n "${DOCS}" ]] && dodoc "${DOCS}" && \
        debug-print "Installed ${DOCS}"

}


EXPORT_FUNCTIONS src_install
1	nixphoeni	1.13	# Copyright 2004-2006 Gentoo Foundation
2	obz	1.1	# Distributed under the terms of the GNU General Public License, v2 or later
3	nixphoeni	1.15	# $Header: /var/cvsroot/gentoo-x86/eclass/gdesklets.eclass,v 1.14 2006/05/26 04:18:43 nixphoeni Exp $
4	obz	1.1	#
5			# Authors: Joe Sapp <nixphoeni@gentoo.org>
6			# Mike Gardiner <obz@gentoo.org>
7			#
8			# Usage:
9			# As a writer for an ebuild for gDesklets, you should set a few things:
10			#
11			# DESKLET_NAME: The name of the desklet.
12			# DOCS: Anything (like a README) that should be dodoc'd.
13			# S: Optional The package's base directory.
14			# Usually ${WORKDIR}/${DESKLET_NAME} if it was packaged
15			# correctly (hence, this is the default).
16			# RDEPEND: Optional Set if the desklet requires a minimum version
17			# of gDesklets greater than 0.34 or other packages.
18
19	nixphoeni	1.13	inherit eutils multilib python
20	nixphoeni	1.5
21	obz	1.1
22			MY_P="${DESKLET_NAME}-${PV}"
23			S=${WORKDIR}/${DESKLET_NAME}
24
25			SRC_URI="http://gdesklets.gnomedesktop.org/files/${MY_P}.tar.gz"
26
27			# Ebuild writer shouldn't need to touch these (except maybe $RDEPEND)
28			SLOT="0"
29			IUSE=""
30	nixphoeni	1.11	RDEPEND=">=gnome-extra/gdesklets-core-0.34.3-r1"
31	obz	1.1
32	nixphoeni	1.15	GDESKLETS_INST_DIR="${ROOT}usr/$(get_libdir)/gdesklets"
33	obz	1.1
34			gdesklets_src_install() {
35	swegener	1.8
36	obz	1.1	debug-print-function $FUNCNAME $*
37	swegener	1.8
38	nixphoeni	1.13	# Disable compilation of included python modules (Controls)
39			python_disable_pyc
40
41			# Do not remove - see bugs 126890 and 128289
42			addwrite "${ROOT}/root/.gnome2"
43
44	obz	1.1	has_version ">=gnome-extra/gdesklets-core-0.33.1" \|\| \
45			GDESKLETS_INST_DIR="/usr/share/gdesklets"
46	swegener	1.8
47	obz	1.1	# This should be done by the gdesklets-core ebuild
48	swegener	1.8	# It makes the Displays or Controls directory in the
49	obz	1.1	# global installation directory if it doesn't exist
50	nixphoeni	1.15	[[ -d "${GDESKLETS_INST_DIR}/Displays" ]] \|\| \
51			dodir "${GDESKLETS_INST_DIR}/Displays"
52	swegener	1.8
53	obz	1.1	# The displays only need to be readable
54			insopts -m0744
55	swegener	1.8
56	nixphoeni	1.5	# Check to see if DISPLAY is set for the
57			# gdesklets-control-getid script to run without
58			# error
59			[ -z "${DISPLAY}" ] && DISPLAY=""
60			export DISPLAY
61	swegener	1.8
62	nixphoeni	1.11	debug-print-section sensor_install
63	obz	1.1	# First, install the Sensor (if there is one)
64			if [[ -n "${SENSOR_NAME}" ]]; then
65			for SENS in ${SENSOR_NAME[@]}; do
66			einfo "Installing Sensor ${SENS}"
67			/usr/bin/python "Install_${SENS}_Sensor.bin" \
68			--nomsg ${D}${GDESKLETS_INST_DIR}/Sensors \|\| \
69			die "Couldn't Install Sensor"
70	swegener	1.8
71	nixphoeni	1.10	chown -R root:0 ${D}${GDESKLETS_INST_DIR}/Sensors/${SENSOR_NAME}
72	obz	1.1	done # for in ${SENSOR_NAME}
73			fi # if -n "${SENSOR_NAME}"
74	swegener	1.8
75	nixphoeni	1.11	debug-print-section display_install
76	obz	1.1	# This finds the Displays
77			DISPLAY_FILES=(`find . -iname "*.display"`)
78	swegener	1.8
79	nixphoeni	1.11	DESKLET_INSDIR=""
80	swegener	1.8
81	nixphoeni	1.11	# There is most likely only one display per package
82	obz	1.1	if [[ -n "${DISPLAY_FILES[@]}" ]]; then
83	nixphoeni	1.11	# Base installation directory for displays from this desklet
84			DESKLET_INSDIR="${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"
85	swegener	1.8
86			# This creates the subdirectory of ${DESKLET_NAME}
87	obz	1.1	# in the global Displays directory
88	nixphoeni	1.15	[[ -d "${DESKLET_INSDIR}" ]] \|\| \
89			dodir "${DESKLET_INSDIR}"
90	swegener	1.8
91			# For each of the Display files, there may be
92	obz	1.1	# scripts included inline which don't necessarily
93			# follow any naming scheme.
94			# So for each of them, determine what those scripts are
95			# and install them.
96			for DSP in ${DISPLAY_FILES[@]}; do
97	swegener	1.8
98	nixphoeni	1.11	cd `dirname ${DSP}`
99	obz	1.1	einfo "Installing Display `basename ${DSP} .display`"
100	nixphoeni	1.11	debug-print "Installing ${DSP} into ${DESKLET_INSDIR}"
101			DSP=`basename ${DSP}`
102	nixphoeni	1.15	insinto "${DESKLET_INSDIR}"
103	obz	1.1	doins ${DSP}
104	swegener	1.8
105	nixphoeni	1.9	SCRIPTS=$(grep "script .*uri" ${DSP} \| \
106			sed -e 's:.<script .uri=": :g' -e 's:"/>.*: :g')
107	swegener	1.8
108	obz	1.1	# For each one of the scripts, change to its
109			# base directory and change the install location
110			# so it gets installed at the proper place
111			# relative to the display.
112			for SCR in ${SCRIPTS[@]}; do
113	swegener	1.8
114	nixphoeni	1.15	insinto "${DESKLET_INSDIR}/`dirname ${SCR}`"
115			doins "${SCR}"
116	nixphoeni	1.14	debug-print "Installed ${SCR} into ${DESKLET_INSDIR}/`dirname ${SCR}`"
117	swegener	1.8
118	obz	1.1	done # for in ${SCRIPTS}
119	swegener	1.8
120	obz	1.1	# Install the graphics for this display.
121			# If there are multiple displays in this
122			# directory, this will be done more than
123	swegener	1.8	# once. It's the only solution I can
124	obz	1.1	# come up with for now...
125			GFX=(`find . \
126			-iname ".png" -o -iname ".svg" \
127	nixphoeni	1.4	-o -iname ".jpg" -o -iname ".gif" \
128			-o -iname "*.xcf"`)
129	swegener	1.8
130	obz	1.1	for G in ${GFX[@]}; do
131	swegener	1.8
132	nixphoeni	1.15	insinto "${DESKLET_INSDIR}/`dirname ${G}`"
133			doins "${G}"
134	nixphoeni	1.11	debug-print "Installed ${G} into ${DESKLET_INSDIR}/`dirname ${G}`"
135	swegener	1.8
136	nixphoeni	1.2	done # for in ${GFX}
137	swegener	1.8
138	nixphoeni	1.15	cd "${S}"
139	swegener	1.8
140	obz	1.1	done # for in ${DISPLAY_FILES}
141	swegener	1.8
142	obz	1.1	fi
143	swegener	1.8
144	nixphoeni	1.11	debug-print-section control_install
145	swegener	1.12
146	nixphoeni	1.11	CONTROL_INSDIR=""
147	swegener	1.12
148	obz	1.1	# Make sure that it only finds Controls and not Sensors
149			# If it uses a Sensor, it shouldn't use a Control (since
150			# Sensors are deprecated).
151	swegener	1.8	if [[ -z "${SENSOR_NAME}" ]]; then
152
153	obz	1.1	# Base installation directory for Controls
154	nixphoeni	1.11	CONTROL_INSDIR="${GDESKLETS_INST_DIR}/Controls"
155	swegener	1.8
156	obz	1.1	CONTROL_INITS=$(find . -iname "__init__.py" \| grep [Cc]ontrols)
157	swegener	1.8
158	obz	1.1	# There are possibly multiple Controls packaged with the display.
159			# For each __init__.py found, there must be a Control associated with it.
160			for CTRL in ${CONTROL_INITS[@]}; do
161	swegener	1.8
162	obz	1.1	cd `dirname ${CTRL}`
163	nixphoeni	1.13	CTRL_NAME=$( ${GDESKLETS_INST_DIR}/gdesklets-control-getid `pwd` )
164	obz	1.1	einfo "Installing Control ${CTRL_NAME}"
165	swegener	1.8	# This creates the subdirectory of ${CTRL_NAME}
166			# in the global Controls directory
167	nixphoeni	1.15	[[ -d "${CONTROL_INSDIR}/${CTRL_NAME}" ]] \|\| \
168			dodir "${CONTROL_INSDIR}/${CTRL_NAME}"
169	swegener	1.8
170	nixphoeni	1.15	insinto "${CONTROL_INSDIR}/${CTRL_NAME}"
171	swegener	1.8
172	obz	1.1	doins -r *
173	swegener	1.8
174	nixphoeni	1.15	cd "${S}"
175	swegener	1.8
176	obz	1.1	done # for in ${CONTROL_INITS}
177	swegener	1.8
178	obz	1.1	fi # if no Sensors
179	swegener	1.8
180	obz	1.1	# Install any remaining graphics and other files
181			# that are sitting in ${S}.
182	swegener	1.8
183	obz	1.1	GFX=$(find . -maxdepth 1 \
184			-iname ".png" -o -iname ".svg" \
185	nixphoeni	1.4	-o -iname ".jpg" -o -iname ".gif" \
186			-o -iname "*.xcf")
187	swegener	1.8
188	obz	1.1	if [[ -n "${GFX}" ]]; then
189	nixphoeni	1.11
190	obz	1.1	# Install to the Displays directory of the Desklet
191	nixphoeni	1.15	insinto "${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"
192			doins "${GFX}"
193	nixphoeni	1.11	debug-print "Installed ${GFX} into ${GDESKLETS_INST_DIR}/Displays/${DESKLET_NAME}"
194
195	obz	1.1	fi # if -n "${GFX}"
196	swegener	1.8
197	obz	1.1	# Install some docs if so requested
198	nixphoeni	1.15	[[ -n "${DOCS}" ]] && dodoc "${DOCS}" && \
199	nixphoeni	1.11	debug-print "Installed ${DOCS}"
200	swegener	1.8
201	obz	1.1	}
202
203
204			EXPORT_FUNCTIONS src_install