/[gentoo-x86]/eclass/perl-module.eclass
Gentoo

Diff of /eclass/perl-module.eclass

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.67 Revision 1.129
1# Copyright 1999-2004 Gentoo Foundation 1# Copyright 1999-2009 Gentoo Foundation
2# Distributed under the terms of the GNU General Public License v2 2# Distributed under the terms of the GNU General Public License v2
3# $Header: /var/cvsroot/gentoo-x86/eclass/perl-module.eclass,v 1.67 2005/03/14 18:28:04 mcummings Exp $ 3# $Header: /var/cvsroot/gentoo-x86/eclass/perl-module.eclass,v 1.129 2011/01/30 08:18:42 tove Exp $
4# 4#
5# Author: Seemant Kulleen <seemant@gentoo.org> 5# Author: Seemant Kulleen <seemant@gentoo.org>
6# Maintained by the Perl herd <perl@gentoo.org> 6
7# 7# @ECLASS: perl-module.eclass
8# @MAINTAINER:
9# perl@gentoo.org
10# @BLURB: eclass for perl modules
11# @DESCRIPTION:
8# The perl-module eclass is designed to allow easier installation of perl 12# The perl-module eclass is designed to allow easier installation of perl
9# modules, and their incorporation into the Gentoo Linux system. 13# modules, and their incorporation into the Gentoo Linux system.
10 14
11ECLASS=perl-module 15inherit eutils base
12INHERITED="${INHERITED} ${ECLASS}" 16[[ ${CATEGORY} == "perl-core" ]] && inherit alternatives
13 17
18PERL_EXPF="src_unpack src_compile src_test src_install"
19
20case "${EAPI:-0}" in
21 0|1)
14EXPORT_FUNCTIONS pkg_setup pkg_preinst pkg_postinst pkg_prerm pkg_postrm \ 22 PERL_EXPF+=" pkg_setup pkg_preinst pkg_postinst pkg_prerm pkg_postrm"
15 src_compile src_install src_test \ 23 ;;
16 perlinfo updatepod 24 2|3|4)
25 PERL_EXPF+=" src_prepare src_configure"
26 [[ ${CATEGORY} == "perl-core" ]] && \
27 PERL_EXPF+=" pkg_postinst pkg_postrm"
17 28
18# 2004.05.10 rac 29 case "${GENTOO_DEPEND_ON_PERL:-yes}" in
19# block on makemaker versions earlier than that in the 5.8.2 core. in 30 yes)
20# actuality, this should be handled in the perl ebuild, so every perl 31 DEPEND="dev-lang/perl[-build]"
21# ebuild should block versions of MakeMaker older than the one it 32 RDEPEND="${DEPEND}"
22# carries. in the meantime, since we have dumped support for MakeMaker 33 ;;
23# <6.11 and the associated broken DESTDIR handling, block here to save 34 esac
24# people from sandbox trouble. 35 ;;
25# 36 *)
26# 2004.05.25 rac 37 die "EAPI=${EAPI} is not supported by perl-module.eclass"
27# for the same reasons, make the perl dep >=5.8.2 to get everybody 38 ;;
28# with 5.8.0 and its 6.03 makemaker up to a version that can 39esac
29# understand DESTDIR
30#
31# 2004.10.01 mcummings
32# noticed a discrepancy in how we were sed fixing references to ${D}
33#
34# 2005.03.14 mcummings
35# Updated eclass to include a specific function for dealing with perlocal.pods -
36# this should avoid the conflicts we've been running into with the introduction
37# of file collision features by giving us a single exportable function to deal
38# with the pods. Modifications to the eclass provided by Yaakov S
39# <yselkowitz@hotmail.com> in bug 83622
40#
41# <later the same day>
42# The long awaited (by me) fix for automagically detecting and dealing
43# with module-build dependancies. I've chosen not to make it a default dep since
44# this adds overhead to people that might not otherwise need it, and instead
45# modified the eclass to detect the existence of a Build.PL and behave
46# accordingly. This will fix issues with g-cpan builds that needs module-build
47# support, as well as get rid of the (annoying) style=builder vars. I know of
48# only one module that needed to be hacked for this, Class-MethodMaker-2.05, but
49# that module has a bad Build.PL to begin with. Ebuilds should continue to
50# DEPEND on module-build<-version> as needed, but there should be no need for
51# the style directive any more (especially since it isn't in the eclass
52# anymore). Enjoy!
53 40
41case "${PERL_EXPORT_PHASE_FUNCTIONS:-yes}" in
42 yes)
43 EXPORT_FUNCTIONS ${PERL_EXPF}
44 ;;
45 no)
46 debug-print "PERL_EXPORT_PHASE_FUNCTIONS=no"
47 ;;
48 *)
49 die "PERL_EXPORT_PHASE_FUNCTIONS=${PERL_EXPORT_PHASE_FUNCTIONS} is not supported by perl-module.eclass"
50 ;;
51esac
54 52
53DESCRIPTION="Based on the $ECLASS eclass"
55 54
56DEPEND=">=dev-lang/perl-5.8.2 !<dev-perl/ExtUtils-MakeMaker-6.17" 55LICENSE="${LICENSE:-|| ( Artistic GPL-1 GPL-2 GPL-3 )}"
56
57# TODO: Document variables: MODULE_VERSION, MODULE_A, MODULE_A_EXT,
58# MODULE_AUTHOR, MODULE_SECTION, GENTOO_DEPEND_ON_PERL, PREFER_BUILDPL
59if [[ -n ${MY_PN} || -n ${MY_PV} || -n ${MODULE_VERSION} ]] ; then
60 : ${MY_P:=${MY_PN:-${PN}}-${MY_PV:-${MODULE_VERSION:-${PV}}}}
61 S=${MY_S:-${WORKDIR}/${MY_P}}
62fi
63[[ -z "${SRC_URI}" && -z "${MODULE_A}" ]] && \
64 MODULE_A="${MY_P:-${P}}.${MODULE_A_EXT:-tar.gz}"
65[[ -z "${SRC_URI}" && -n "${MODULE_AUTHOR}" ]] && \
66 SRC_URI="mirror://cpan/authors/id/${MODULE_AUTHOR:0:1}/${MODULE_AUTHOR:0:2}/${MODULE_AUTHOR}/${MODULE_SECTION:+${MODULE_SECTION}/}${MODULE_A}"
67[[ -z "${HOMEPAGE}" ]] && \
68 HOMEPAGE="http://search.cpan.org/dist/${MY_PN:-${PN}}/"
69
57SRC_PREP="no" 70SRC_PREP="no"
58SRC_TEST="skip" 71SRC_TEST="skip"
72PREFER_BUILDPL="yes"
59 73
60PERL_VERSION="" 74pm_echovar=""
61SITE_ARCH="" 75perlinfo_done=false
62SITE_LIB="" 76
63VENDOR_LIB="" 77perl-module_src_unpack() {
64VENDOR_ARCH="" 78 debug-print-function $FUNCNAME "$@"
65ARCH_LIB="" 79 base_src_unpack
66POD_DIR="" 80 has src_prepare ${PERL_EXPF} || perl-module_src_prepare
67BUILDER_VER="" 81}
82
83perl-module_src_prepare() {
84 debug-print-function $FUNCNAME "$@"
85 has src_prepare ${PERL_EXPF} && base_src_prepare
86 perl_fix_osx_extra
87 esvn_clean
88}
89
90perl-module_src_configure() {
91 debug-print-function $FUNCNAME "$@"
92 perl-module_src_prep
93}
68 94
69perl-module_src_prep() { 95perl-module_src_prep() {
96 debug-print-function $FUNCNAME "$@"
97 [[ ${SRC_PREP} = yes ]] && return 0
98 SRC_PREP="yes"
70 99
71 perlinfo 100 perl_set_version
101 perl_set_eprefix
72 102
73 export PERL_MM_USE_DEFAULT=1 103 export PERL_MM_USE_DEFAULT=1
104 # Disable ExtUtils::AutoInstall from prompting
105 export PERL_EXTUTILS_AUTOINSTALL="--skipdeps"
74 106
75 107 if [[ $(declare -p myconf 2>&-) != "declare -a myconf="* ]]; then
76 SRC_PREP="yes" 108 local myconf_local=(${myconf})
77 if [ -f ${S}/Build.PL ]; then
78 if [ -z ${BUILDER_VER} ]; then
79 eerror
80 eerror "Please post a bug on http://bugs.gentoo.org assigned to"
81 eerror "perl@gentoo.org - ${P} was added without a dependancy"
82 eerror "on dev-perl/module-build"
83 eerror "${BUILDER_VER}"
84 eerror
85 die
86 else 109 else
87 perl ${S}/Build.PL installdirs=vendor destdir=${D} 110 local myconf_local=("${myconf[@]}")
111 fi
112
113 if [[ ( ${PREFER_BUILDPL} == yes || ! -f Makefile.PL ) && -f Build.PL ]] ; then
114 einfo "Using Module::Build"
115 if [[ ${DEPEND} != *virtual/perl-Module-Build* && ${PN} != Module-Build ]] ; then
116 eqawarn "QA Notice: The ebuild uses Module::Build but doesn't depend on it."
117 eqawarn " Add virtual/perl-Module-Build to DEPEND!"
118 if [[ -n ${PERLQAFATAL} ]]; then
119 eerror "Bailing out due to PERLQAFATAL=1";
120 die;
121 fi
88 fi 122 fi
123 set -- \
124 --installdirs=vendor \
125 --libdoc= \
126 --destdir="${D}" \
127 --create_packlist=0 \
128 "${myconf_local[@]}"
129 einfo "perl Build.PL" "$@"
130 perl Build.PL "$@" <<< "${pm_echovar}" \
131 || die "Unable to build!"
132 elif [[ -f Makefile.PL ]] ; then
133 einfo "Using ExtUtils::MakeMaker"
134 set -- \
135 PREFIX=${EPREFIX}/usr \
136 INSTALLDIRS=vendor \
137 INSTALLMAN3DIR='none' \
138 DESTDIR="${D}" \
139 "${myconf_local[@]}"
140 einfo "perl Makefile.PL" "$@"
141 perl Makefile.PL "$@" <<< "${pm_echovar}" \
142 || die "Unable to build!"
143 fi
144 if [[ ! -f Build.PL && ! -f Makefile.PL ]] ; then
145 einfo "No Make or Build file detected..."
146 return
147 fi
148}
149
150perl-module_src_compile() {
151 debug-print-function $FUNCNAME "$@"
152 perl_set_version
153
154 has src_configure ${PERL_EXPF} || perl-module_src_prep
155
156 if [[ $(declare -p mymake 2>&-) != "declare -a mymake="* ]]; then
157 local mymake_local=(${mymake})
89 else 158 else
90 perl Makefile.PL ${myconf} \ 159 local mymake_local=("${mymake[@]}")
91 PREFIX=/usr INSTALLDIRS=vendor DESTDIR=${D}
92 fi 160 fi
93}
94 161
95perl-module_src_compile() { 162 if [[ -f Build ]] ; then
96 163 ./Build build \
97 perlinfo
98 [ "${SRC_PREP}" != "yes" ] && perl-module_src_prep
99 if [ -z ${BUILDER_VER} ]; then
100 make ${mymake} || die "compilation failed" 164 || die "Compilation failed"
165 elif [[ -f Makefile ]] ; then
166 set -- \
167 OTHERLDFLAGS="${LDFLAGS}" \
168 "${mymake_local[@]}"
169 einfo "emake" "$@"
170 emake "$@" \
171 || die "Compilation failed"
172# OPTIMIZE="${CFLAGS}" \
101 fi 173 fi
174}
102 175
103 if [ "${SRC_TEST}" == "do" ]; then 176# For testers:
104 perl-module_src_test || die "test failed" 177# This code attempts to work out your threadingness from MAKEOPTS
178# and apply them to Test::Harness.
179#
180# If you want more verbose testing, set TEST_VERBOSE=1
181# in your bashrc | /etc/make.conf | ENV
182#
183# For ebuild writers:
184# If you wish to enable default tests w/ 'make test' ,
185#
105 SRC_TEST="done" 186# SRC_TEST="do"
106 fi 187#
107} 188# If you wish to have threads run in parallel ( using the users makeopts )
189# all of the following have been tested to work.
190#
191# SRC_TEST="do parallel"
192# SRC_TEST="parallel"
193# SRC_TEST="parallel do"
194# SRC_TEST=parallel
195#
108 196
109perl-module_src_test() { 197perl-module_src_test() {
110 perlinfo 198 debug-print-function $FUNCNAME "$@"
111 if [ -z ${BUILDER_VER} ]; then 199 if has 'do' ${SRC_TEST} || has 'parallel' ${SRC_TEST} ; then
112 make test 200 if has "${TEST_VERBOSE:-0}" 0 && has 'parallel' ${SRC_TEST} ; then
201 export HARNESS_OPTIONS=j$(echo -j1 ${MAKEOPTS} | sed -r "s/.*(-j\s*|--jobs=)([0-9]+).*/\2/" )
202 einfo "Test::Harness Jobs=${HARNESS_OPTIONS}"
203 fi
204 ${perlinfo_done} || perl_set_version
205 if [[ -f Build ]] ; then
206 ./Build test verbose=${TEST_VERBOSE:-0} || die "test failed"
207 elif [[ -f Makefile ]] ; then
208 emake test TEST_VERBOSE=${TEST_VERBOSE:-0} || die "test failed"
209 fi
210 fi
211}
212
213perl-module_src_install() {
214 debug-print-function $FUNCNAME "$@"
215
216 perl_set_version
217 perl_set_eprefix
218
219 local f
220
221 if [[ -z ${mytargets} ]] ; then
222 case "${CATEGORY}" in
223 dev-perl|perl-core) mytargets="pure_install" ;;
224 *) mytargets="install" ;;
225 esac
226 fi
227
228 if [[ $(declare -p myinst 2>&-) != "declare -a myinst="* ]]; then
229 local myinst_local=(${myinst})
113 else 230 else
114 perl ${S}/Build test 231 local myinst_local=("${myinst[@]}")
115 fi 232 fi
116}
117 233
234 if [[ -f Build ]] ; then
235 ./Build ${mytargets} \
236 || die "./Build ${mytargets} failed"
237 elif [[ -f Makefile ]] ; then
238 emake "${myinst_local[@]}" ${mytargets} \
239 || die "emake ${myinst_local[@]} ${mytargets} failed"
240 fi
241
242 perl_delete_module_manpages
243 perl_delete_localpod
244 perl_delete_packlist
245 perl_remove_temppath
246
247 for f in Change* CHANGES README* TODO FAQ ${mydoc}; do
248 [[ -s ${f} ]] && dodoc ${f}
249 done
250
251 perl_link_duallife_scripts
252}
253
254perl-module_pkg_setup() {
255 debug-print-function $FUNCNAME "$@"
256 perl_set_version
257}
258
118perl-module_src_install() { 259perl-module_pkg_preinst() {
119 260 debug-print-function $FUNCNAME "$@"
261 perl_set_version
262}
263
264perl-module_pkg_postinst() {
265 debug-print-function $FUNCNAME "$@"
266 perl_link_duallife_scripts
267}
268
269perl-module_pkg_prerm() {
270 debug-print-function $FUNCNAME "$@"
271}
272
273perl-module_pkg_postrm() {
274 debug-print-function $FUNCNAME "$@"
275 perl_link_duallife_scripts
276}
277
120 perlinfo 278perlinfo() {
121 279 debug-print-function $FUNCNAME "$@"
122 test -z ${mytargets} && mytargets="install" 280 perl_set_version
123 281}
124 if [ -z ${BUILDER_VER} ]; then
125 make ${myinst} ${mytargets} || die
126 else
127 perl ${S}/Build install
128 fi
129 282
283perl_set_version() {
284 debug-print-function $FUNCNAME "$@"
285 debug-print "$FUNCNAME: perlinfo_done=${perlinfo_done}"
286 ${perlinfo_done} && return 0
287 perlinfo_done=true
288
289 local f version install{{site,vendor}{arch,lib},archlib}
290 eval "$(perl -V:{version,install{{site,vendor}{arch,lib},archlib}} )"
291 PERL_VERSION=${version}
292 SITE_ARCH=${installsitearch}
293 SITE_LIB=${installsitelib}
294 ARCH_LIB=${installarchlib}
295 VENDOR_LIB=${installvendorlib}
296 VENDOR_ARCH=${installvendorarch}
297}
298
130 fixlocalpod 299fixlocalpod() {
300 debug-print-function $FUNCNAME "$@"
301 perl_delete_localpod
302}
131 303
132 for FILE in `find ${D} -type f |grep -v '.so'`; do 304perl_delete_localpod() {
133 STAT=`file $FILE| grep -i " text"` 305 debug-print-function $FUNCNAME "$@"
134 if [ "${STAT}x" != "x" ]; then 306
307 find "${D}" -type f -name perllocal.pod -delete
308 find "${D}" -depth -mindepth 1 -type d -empty -delete
309}
310
311perl_fix_osx_extra() {
312 debug-print-function $FUNCNAME "$@"
313
314 # Remove "AppleDouble encoded Macintosh file"
315 local f
316 find "${S}" -type f -name "._*" -print0 | while read -rd '' f ; do
317 einfo "Removing AppleDouble encoded Macintosh file: ${f#${S}/}"
318 rm -f "${f}"
319 f=${f#${S}/}
320 # f=${f//\//\/}
321 # f=${f//\./\.}
322 # sed -i "/${f}/d" "${S}"/MANIFEST || die
323 grep -q "${f}" "${S}"/MANIFEST && \
324 elog "AppleDouble encoded Macintosh file in MANIFEST: ${f#${S}/}"
325 done
326}
327
328perl_delete_module_manpages() {
329 debug-print-function $FUNCNAME "$@"
330
331 perl_set_eprefix
332
333 if [[ -d "${ED}"/usr/share/man ]] ; then
334# einfo "Cleaning out stray man files"
335 find "${ED}"/usr/share/man -type f -name "*.3pm" -delete
336 find "${ED}"/usr/share/man -depth -type d -empty -delete
337 fi
338}
339
340
341perl_delete_packlist() {
342 debug-print-function $FUNCNAME "$@"
343 perl_set_version
344 if [[ -d ${D}/${VENDOR_ARCH} ]] ; then
345 find "${D}/${VENDOR_ARCH}" -type f -a \( -name .packlist \
346 -o \( -name '*.bs' -a -empty \) \) -delete
347 find "${D}" -depth -mindepth 1 -type d -empty -delete
348 fi
349}
350
351perl_remove_temppath() {
352 debug-print-function $FUNCNAME "$@"
353
354 find "${D}" -type f -not -name '*.so' -print0 | while read -rd '' f ; do
355 if file "${f}" | grep -q -i " text" ; then
356 grep -q "${D}" "${f}" && ewarn "QA: File contains a temporary path ${f}"
135 sed -i -e "s:${D}:/:g" ${FILE} 357 sed -i -e "s:${D}:/:g" "${f}"
136 fi 358 fi
137 done 359 done
138
139 for doc in Change* MANIFEST* README*; do
140 [ -s "$doc" ] && dodoc $doc
141 done
142 dodoc ${mydoc}
143} 360}
144 361
145 362perl_link_duallife_scripts() {
146perl-module_pkg_setup() { 363 debug-print-function $FUNCNAME "$@"
147 364 if [[ ${CATEGORY} != perl-core ]] || ! has_version ">=dev-lang/perl-5.8.8-r8" ; then
148 perlinfo 365 return 0
149}
150
151
152perl-module_pkg_preinst() {
153
154 perlinfo
155}
156
157perl-module_pkg_postinst() {
158
159 updatepod
160}
161
162perl-module_pkg_prerm() {
163
164 updatepod
165}
166
167perl-module_pkg_postrm() {
168
169 updatepod
170}
171
172perlinfo() {
173
174 eval `perl '-V:version'`
175 PERL_VERSION=${version}
176
177 eval `perl '-V:installsitearch'`
178 SITE_ARCH=${installsitearch}
179
180 eval `perl '-V:installsitearch'`
181 SITE_LIB=${installsitearch}
182
183 eval `perl '-V:installarchlib'`
184 ARCH_LIB=${installarchlib}
185
186 eval `perl '-V:installvendorlib'`
187 VENDOR_LIB=${installvendorlib}
188
189 eval `perl '-V:installvendorarch'`
190 VENDOR_ARCH=${installvendorarch}
191
192 if [ -f ${S}/Build.PL ]; then
193 if [ ${PN} == "module-build" ]; then
194 BUILDER_VER="1" # A bootstrapping if you will
195 else
196 BUILDER_VER=`perl -MModule::Build -e 'print "$Module::Build::VERSION;"' `
197 fi 366 fi
198 fi
199 367
200 if [ -f /usr/bin/perl ] 368 perl_set_eprefix
201 then
202 POD_DIR="/usr/share/perl/gentoo-pods/${version}"
203 fi
204}
205 369
206fixlocalpod() { 370 local i ff
207 perlinfo 371 if has "${EBUILD_PHASE:-none}" "postinst" "postrm" ; then
208 dodir ${POD_DIR} 372 for i in "${DUALLIFESCRIPTS[@]}" ; do
209 373 alternatives_auto_makesym "/usr/bin/${i}" "/usr/bin/${i}-[0-9]*"
210 if [ -f ${D}${ARCH_LIB}/perllocal.pod ]; 374 ff=`echo "${EROOT}"/usr/share/man/man1/${i}-${PV}-${P}.1*`
211 then 375 ff=${ff##*.1}
212 touch ${D}/${POD_DIR}/${P}.pod 376 alternatives_auto_makesym "/usr/share/man/man1/${i}.1${ff}" "/usr/share/man/man1/${i}-[0-9]*"
213 sed -e "s:${D}::g" \
214 ${D}${ARCH_LIB}/perllocal.pod >> ${D}/${POD_DIR}/${P}.pod
215 touch ${D}/${POD_DIR}/${P}.pod.arch
216 cat ${D}/${POD_DIR}/${P}.pod >>${D}/${POD_DIR}/${P}.pod.arch
217 rm -f ${D}/${ARCH_LIB}/perllocal.pod
218 fi
219
220 if [ -f ${D}${SITE_LIB}/perllocal.pod ];
221 then
222 touch ${D}/${POD_DIR}/${P}.pod
223 sed -e "s:${D}::g" \
224 ${D}${SITE_LIB}/perllocal.pod >> ${D}/${POD_DIR}/${P}.pod
225 touch ${D}/${POD_DIR}/${P}.pod.site
226 cat ${D}/${POD_DIR}/${P}.pod >>${D}/${POD_DIR}/${P}.pod.site
227 rm -f ${D}/${SITE_LIB}/perllocal.pod
228 fi
229
230 if [ -f ${D}${VENDOR_LIB}/perllocal.pod ];
231 then
232 touch ${D}/${POD_DIR}/${P}.pod
233 sed -e "s:${D}::g" \
234 ${D}${VENDOR_LIB}/perllocal.pod >> ${D}/${POD_DIR}/${P}.pod
235 touch ${D}/${POD_DIR}/${P}.pod.vendor
236 cat ${D}/${POD_DIR}/${P}.pod >>${D}/${POD_DIR}/${P}.pod.vendor
237 rm -f ${D}/${VENDOR_LIB}/perllocal.pod
238 fi
239}
240
241updatepod() {
242 perlinfo
243
244 if [ -d "${POD_DIR}" ]
245 then
246 for FILE in `find ${POD_DIR} -type f -name "*.pod.arch"`; do
247 cat ${FILE} >> ${ARCH_LIB}/perllocal.pod
248 rm -f ${FILE}
249 done 377 done
250 for FILE in `find ${POD_DIR} -type f -name "*.pod.site"`; do 378 else
251 cat ${FILE} >> ${SITE_LIB}/perllocal.pod 379 pushd "${ED}" > /dev/null
252 rm -f ${FILE} 380 for i in $(find usr/bin -maxdepth 1 -type f 2>/dev/null) ; do
381 mv ${i}{,-${PV}-${P}} || die
382 DUALLIFESCRIPTS[${#DUALLIFESCRIPTS[*]}]=${i##*/}
383 if [[ -f usr/share/man/man1/${i##*/}.1 ]] ; then
384 mv usr/share/man/man1/${i##*/}{.1,-${PV}-${P}.1} || die
385 fi
253 done 386 done
254 for FILE in `find ${POD_DIR} -type f -name "*.pod.vendor"`; do 387 popd > /dev/null
255 cat ${FILE} >> ${VENDOR_LIB}/perllocal.pod 388 fi
256 rm -f ${FILE} 389}
257 done 390
391perl_set_eprefix() {
392 debug-print-function $FUNCNAME "$@"
393 case ${EAPI:-0} in
394 0|1|2)
395 if ! use prefix; then
396 EPREFIX=
397 ED=${D}
398 EROOT=${ROOT}
258 fi 399 fi
400 ;;
401 esac
259} 402}

Legend:
Removed from v.1.67  
changed lines
  Added in v.1.129

  ViewVC Help
Powered by ViewVC 1.1.20