| 1 | # Copyright 1999-2011 Gentoo Foundation |
1 | # Copyright 1999-2012 Gentoo Foundation |
| 2 | # Distributed under the terms of the GNU General Public License v2 |
2 | # Distributed under the terms of the GNU General Public License v2 |
| 3 | # $Header: /var/cvsroot/gentoo-x86/eclass/qt4-build.eclass,v 1.101 2011/11/19 20:52:50 pesa Exp $ |
3 | # $Header: /var/cvsroot/gentoo-x86/eclass/qt4-build.eclass,v 1.135 2012/09/06 08:30:00 kensington Exp $ |
| 4 | |
4 | |
| 5 | # @ECLASS: qt4-build.eclass |
5 | # @ECLASS: qt4-build.eclass |
| 6 | # @MAINTAINER: |
6 | # @MAINTAINER: |
| 7 | # Qt herd <qt@gentoo.org> |
7 | # Qt herd <qt@gentoo.org> |
| 8 | # @BLURB: Eclass for Qt4 split ebuilds. |
8 | # @BLURB: Eclass for Qt4 split ebuilds. |
| 9 | # @DESCRIPTION: |
9 | # @DESCRIPTION: |
| 10 | # This eclass contains various functions that are used when building Qt4. |
10 | # This eclass contains various functions that are used when building Qt4. |
| 11 | |
11 | |
|
|
12 | case ${EAPI} in |
|
|
13 | 2|3|4) : ;; |
|
|
14 | *) die "qt4-build.eclass requires EAPI 2, 3 or 4." ;; |
|
|
15 | esac |
|
|
16 | |
| 12 | inherit base eutils multilib toolchain-funcs flag-o-matic versionator |
17 | inherit eutils flag-o-matic multilib toolchain-funcs versionator |
|
|
18 | |
|
|
19 | if [[ ${PV} == *9999* ]]; then |
|
|
20 | QT4_BUILD_TYPE="live" |
|
|
21 | inherit git-2 |
|
|
22 | else |
|
|
23 | QT4_BUILD_TYPE="release" |
|
|
24 | fi |
|
|
25 | |
|
|
26 | HOMEPAGE="http://qt-project.org/ http://qt.nokia.com/" |
|
|
27 | LICENSE="|| ( LGPL-2.1 GPL-3 )" |
| 13 | |
28 | |
| 14 | MY_PV=${PV/_/-} |
29 | MY_PV=${PV/_/-} |
| 15 | MY_P=qt-everywhere-opensource-src-${MY_PV} |
30 | MY_P=qt-everywhere-opensource-src-${MY_PV} |
| 16 | |
31 | |
| 17 | HOMEPAGE="http://qt.nokia.com/" |
32 | case ${QT4_BUILD_TYPE} in |
|
|
33 | live) |
|
|
34 | EGIT_REPO_URI="git://gitorious.org/qt/qt.git |
|
|
35 | https://git.gitorious.org/qt/qt.git" |
|
|
36 | EGIT_BRANCH=${PV%.9999} |
|
|
37 | ;; |
|
|
38 | release) |
|
|
39 | if version_is_at_least 4.8.1; then |
|
|
40 | SRC_URI="http://releases.qt-project.org/qt4/source/${MY_P}.tar.gz" |
|
|
41 | else |
| 18 | SRC_URI="http://get.qt.nokia.com/qt/source/${MY_P}.tar.gz" |
42 | SRC_URI="http://get.qt.nokia.com/qt/source/${MY_P}.tar.gz" |
| 19 | LICENSE="|| ( LGPL-2.1 GPL-3 )" |
43 | fi |
|
|
44 | ;; |
|
|
45 | esac |
| 20 | |
46 | |
| 21 | IUSE="aqua debug pch" |
47 | IUSE="aqua debug pch" |
| 22 | |
|
|
| 23 | [[ ${CATEGORY}/${PN} != x11-libs/qt-xmlpatterns ]] && |
48 | [[ ${CATEGORY}/${PN} != x11-libs/qt-xmlpatterns ]] && IUSE+=" +exceptions" |
| 24 | [[ ${CATEGORY}/${PN} != x11-themes/qgtkstyle ]] && |
|
|
| 25 | IUSE+=" +exceptions" |
|
|
| 26 | |
|
|
| 27 | if version_is_at_least 4.7.99999999; then |
49 | if version_is_at_least 4.8; then |
| 28 | IUSE+=" c++0x qpa" |
50 | [[ ${CATEGORY}/${PN} != x11-libs/qt-webkit ]] && IUSE+=" c++0x" |
|
|
51 | version_is_at_least 4.8.3 || IUSE+=" qpa" |
| 29 | fi |
52 | fi |
| 30 | |
53 | |
| 31 | DEPEND="dev-util/pkgconfig" |
54 | DEPEND="virtual/pkgconfig" |
|
|
55 | if [[ ${QT4_BUILD_TYPE} == live ]]; then |
|
|
56 | DEPEND+=" dev-lang/perl" |
|
|
57 | fi |
|
|
58 | |
| 32 | RDEPEND=" |
59 | RDEPEND=" |
| 33 | !<x11-libs/qt-assistant-${PV} |
60 | !<x11-libs/qt-assistant-${PV}:4 |
| 34 | !>x11-libs/qt-assistant-${PV}-r9999 |
61 | !>x11-libs/qt-assistant-${PV}-r9999:4 |
|
|
62 | !<x11-libs/qt-bearer-${PV}:4 |
|
|
63 | !>x11-libs/qt-bearer-${PV}-r9999:4 |
| 35 | !<x11-libs/qt-core-${PV} |
64 | !<x11-libs/qt-core-${PV}:4 |
| 36 | !>x11-libs/qt-core-${PV}-r9999 |
65 | !>x11-libs/qt-core-${PV}-r9999:4 |
| 37 | !<x11-libs/qt-dbus-${PV} |
66 | !<x11-libs/qt-dbus-${PV}:4 |
| 38 | !>x11-libs/qt-dbus-${PV}-r9999 |
67 | !>x11-libs/qt-dbus-${PV}-r9999:4 |
| 39 | !<x11-libs/qt-declarative-${PV} |
68 | !<x11-libs/qt-declarative-${PV}:4 |
| 40 | !>x11-libs/qt-declarative-${PV}-r9999 |
69 | !>x11-libs/qt-declarative-${PV}-r9999:4 |
| 41 | !<x11-libs/qt-demo-${PV} |
70 | !<x11-libs/qt-demo-${PV}:4 |
| 42 | !>x11-libs/qt-demo-${PV}-r9999 |
71 | !>x11-libs/qt-demo-${PV}-r9999:4 |
| 43 | !<x11-libs/qt-gui-${PV} |
72 | !<x11-libs/qt-gui-${PV}:4 |
| 44 | !>x11-libs/qt-gui-${PV}-r9999 |
73 | !>x11-libs/qt-gui-${PV}-r9999:4 |
| 45 | !<x11-libs/qt-multimedia-${PV} |
74 | !<x11-libs/qt-multimedia-${PV}:4 |
| 46 | !>x11-libs/qt-multimedia-${PV}-r9999 |
75 | !>x11-libs/qt-multimedia-${PV}-r9999:4 |
| 47 | !<x11-libs/qt-opengl-${PV} |
76 | !<x11-libs/qt-opengl-${PV}:4 |
| 48 | !>x11-libs/qt-opengl-${PV}-r9999 |
77 | !>x11-libs/qt-opengl-${PV}-r9999:4 |
|
|
78 | !<x11-libs/qt-openvg-${PV}:4 |
|
|
79 | !>x11-libs/qt-openvg-${PV}-r9999:4 |
| 49 | !<x11-libs/qt-phonon-${PV} |
80 | !<x11-libs/qt-phonon-${PV}:4 |
| 50 | !>x11-libs/qt-phonon-${PV}-r9999 |
81 | !>x11-libs/qt-phonon-${PV}-r9999:4 |
| 51 | !<x11-libs/qt-qt3support-${PV} |
82 | !<x11-libs/qt-qt3support-${PV}:4 |
| 52 | !>x11-libs/qt-qt3support-${PV}-r9999 |
83 | !>x11-libs/qt-qt3support-${PV}-r9999:4 |
| 53 | !<x11-libs/qt-script-${PV} |
84 | !<x11-libs/qt-script-${PV}:4 |
| 54 | !>x11-libs/qt-script-${PV}-r9999 |
85 | !>x11-libs/qt-script-${PV}-r9999:4 |
| 55 | !<x11-libs/qt-sql-${PV} |
86 | !<x11-libs/qt-sql-${PV}:4 |
| 56 | !>x11-libs/qt-sql-${PV}-r9999 |
87 | !>x11-libs/qt-sql-${PV}-r9999:4 |
| 57 | !<x11-libs/qt-svg-${PV} |
88 | !<x11-libs/qt-svg-${PV}:4 |
| 58 | !>x11-libs/qt-svg-${PV}-r9999 |
89 | !>x11-libs/qt-svg-${PV}-r9999:4 |
| 59 | !<x11-libs/qt-test-${PV} |
90 | !<x11-libs/qt-test-${PV}:4 |
| 60 | !>x11-libs/qt-test-${PV}-r9999 |
91 | !>x11-libs/qt-test-${PV}-r9999:4 |
| 61 | !<x11-libs/qt-webkit-${PV} |
92 | !<x11-libs/qt-webkit-${PV}:4 |
| 62 | !>x11-libs/qt-webkit-${PV}-r9999 |
93 | !>x11-libs/qt-webkit-${PV}-r9999:4 |
| 63 | !<x11-libs/qt-xmlpatterns-${PV} |
94 | !<x11-libs/qt-xmlpatterns-${PV}:4 |
| 64 | !>x11-libs/qt-xmlpatterns-${PV}-r9999 |
95 | !>x11-libs/qt-xmlpatterns-${PV}-r9999:4 |
| 65 | " |
96 | " |
| 66 | |
97 | |
| 67 | S=${WORKDIR}/${MY_P} |
98 | S=${WORKDIR}/${MY_P} |
| 68 | |
99 | |
| 69 | # @FUNCTION: qt4-build_pkg_setup |
100 | # @FUNCTION: qt4-build_pkg_setup |
| 70 | # @DESCRIPTION: |
101 | # @DESCRIPTION: |
| 71 | # Sets up S, MY_P, PATH, and LD_LIBRARY_PATH |
102 | # Sets up PATH and LD_LIBRARY_PATH. |
| 72 | qt4-build_pkg_setup() { |
103 | qt4-build_pkg_setup() { |
| 73 | [[ ${EAPI} == 2 ]] && use !prefix && EPREFIX= |
104 | [[ ${EAPI} == 2 ]] && use !prefix && EPREFIX= |
| 74 | |
105 | |
| 75 | # Protect users by not allowing downgrades between releases |
106 | # Protect users by not allowing downgrades between releases. |
| 76 | # Downgrading revisions within the same release should be allowed |
107 | # Downgrading revisions within the same release should be allowed. |
| 77 | if has_version '>'${CATEGORY}/${P}-r9999; then |
108 | if has_version ">${CATEGORY}/${P}-r9999:4"; then |
| 78 | if [[ -z ${I_KNOW_WHAT_I_AM_DOING} ]]; then |
109 | if [[ -z ${I_KNOW_WHAT_I_AM_DOING} ]]; then |
| 79 | eerror "Sanity check to keep you from breaking your system:" |
110 | eerror " *** Sanity check to keep you from breaking your system ***" |
| 80 | eerror " Downgrading Qt is completely unsupported and will break your system!" |
111 | eerror "Downgrading Qt is completely unsupported and will break your system!" |
| 81 | die "aborting to save your system" |
112 | die "aborting to save your system" |
| 82 | else |
113 | else |
| 83 | ewarn "Downgrading Qt is completely unsupported and will break your system!" |
114 | ewarn "Downgrading Qt is completely unsupported and will break your system!" |
| 84 | fi |
115 | fi |
| 85 | fi |
|
|
| 86 | |
|
|
| 87 | if [[ ${PN} == "qt-webkit" ]]; then |
|
|
| 88 | eshopts_push -s extglob |
|
|
| 89 | if is-flagq '-g?(gdb)?([1-9])'; then |
|
|
| 90 | echo |
|
|
| 91 | ewarn "You have enabled debug info (probably have -g or -ggdb in your \$C{,XX}FLAGS)." |
|
|
| 92 | ewarn "You may experience really long compilation times and/or increased memory usage." |
|
|
| 93 | ewarn "If compilation fails, please try removing -g{,gdb} before reporting a bug." |
|
|
| 94 | ewarn "For more info check out bug #307861" |
|
|
| 95 | echo |
|
|
| 96 | fi |
|
|
| 97 | eshopts_pop |
|
|
| 98 | fi |
116 | fi |
| 99 | |
117 | |
| 100 | PATH="${S}/bin${PATH:+:}${PATH}" |
118 | PATH="${S}/bin${PATH:+:}${PATH}" |
| 101 | if [[ ${CHOST} != *-darwin* ]]; then |
119 | if [[ ${CHOST} != *-darwin* ]]; then |
| 102 | LD_LIBRARY_PATH="${S}/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" |
120 | LD_LIBRARY_PATH="${S}/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" |
| … | |
… | |
| 107 | # avoid extract failure. |
125 | # avoid extract failure. |
| 108 | [[ ${CHOST} == *-apple-darwin* ]] && \ |
126 | [[ ${CHOST} == *-apple-darwin* ]] && \ |
| 109 | QT4_EXTRACT_DIRECTORIES="src/gui/kernel/qapplication_mac.mm |
127 | QT4_EXTRACT_DIRECTORIES="src/gui/kernel/qapplication_mac.mm |
| 110 | ${QT4_EXTRACT_DIRECTORIES}" |
128 | ${QT4_EXTRACT_DIRECTORIES}" |
| 111 | fi |
129 | fi |
| 112 | |
|
|
| 113 | # Make sure ebuilds use the required EAPI |
|
|
| 114 | if [[ ${EAPI} != [23] ]]; then |
|
|
| 115 | eerror "The qt4-build eclass requires EAPI=2 or EAPI=3, but this ebuild is using" |
|
|
| 116 | eerror "EAPI=${EAPI:-0}. The ebuild author or editor failed. This ebuild needs to be" |
|
|
| 117 | eerror "fixed. Using qt4-build eclass without EAPI=2 or EAPI=3 will fail." |
|
|
| 118 | die "qt4-build eclass requires EAPI=2 or EAPI=3" |
|
|
| 119 | fi |
|
|
| 120 | |
|
|
| 121 | if ! version_is_at_least 4.1 $(gcc-version); then |
|
|
| 122 | ewarn "Using a GCC version lower than 4.1 is not supported!" |
|
|
| 123 | fi |
|
|
| 124 | } |
130 | } |
|
|
131 | |
|
|
132 | # @ECLASS-VARIABLE: QT4_EXTRACT_DIRECTORIES |
|
|
133 | # @DEFAULT_UNSET |
|
|
134 | # @DESCRIPTION: |
|
|
135 | # Space-separated list including the directories that will be extracted from |
|
|
136 | # Qt tarball. |
| 125 | |
137 | |
| 126 | # @ECLASS-VARIABLE: QT4_TARGET_DIRECTORIES |
138 | # @ECLASS-VARIABLE: QT4_TARGET_DIRECTORIES |
|
|
139 | # @DEFAULT_UNSET |
| 127 | # @DESCRIPTION: |
140 | # @DESCRIPTION: |
| 128 | # Arguments for build_target_directories. Takes the directories, in which the |
141 | # Arguments for build_target_directories. Takes the directories in which the |
| 129 | # code should be compiled. This is a space-separated list |
142 | # code should be compiled. This is a space-separated list. |
| 130 | |
|
|
| 131 | # @ECLASS-VARIABLE: QT4_EXTRACT_DIRECTORIES |
|
|
| 132 | # @DESCRIPTION: |
|
|
| 133 | # Space separated list including the directories that will be extracted from Qt |
|
|
| 134 | # tarball |
|
|
| 135 | |
143 | |
| 136 | # @FUNCTION: qt4-build_src_unpack |
144 | # @FUNCTION: qt4-build_src_unpack |
| 137 | # @DESCRIPTION: |
145 | # @DESCRIPTION: |
| 138 | # Unpacks the sources |
146 | # Unpacks the sources. |
| 139 | qt4-build_src_unpack() { |
147 | qt4-build_src_unpack() { |
| 140 | setqtenv |
148 | setqtenv |
| 141 | local unpack_p="${MY_P}" |
149 | |
| 142 | case "${PV}" in |
150 | if ! version_is_at_least 4.1 $(gcc-version); then |
| 143 | 4.8.0_*) |
151 | ewarn "Using a GCC version lower than 4.1 is not supported." |
| 144 | unpack_p="qt-everywhere-opensource-src-${PV/_*}" |
152 | fi |
|
|
153 | |
|
|
154 | if [[ ${PN} == qt-webkit ]]; then |
|
|
155 | eshopts_push -s extglob |
|
|
156 | if is-flagq '-g?(gdb)?([1-9])'; then |
|
|
157 | echo |
|
|
158 | ewarn "You have enabled debug info (probably have -g or -ggdb in your CFLAGS/CXXFLAGS)." |
|
|
159 | ewarn "You may experience really long compilation times and/or increased memory usage." |
|
|
160 | ewarn "If compilation fails, please try removing -g/-ggdb before reporting a bug." |
|
|
161 | ewarn "For more info check out https://bugs.gentoo.org/307861" |
|
|
162 | echo |
|
|
163 | fi |
|
|
164 | eshopts_pop |
|
|
165 | fi |
|
|
166 | |
|
|
167 | case ${QT4_BUILD_TYPE} in |
|
|
168 | live) |
|
|
169 | git-2_src_unpack |
| 145 | ;; |
170 | ;; |
|
|
171 | release) |
|
|
172 | local tarball="${MY_P}.tar.gz" target= targets= |
|
|
173 | for target in configure LICENSE.GPL3 LICENSE.LGPL projects.pro \ |
|
|
174 | src/{qbase,qt_targets,qt_install}.pri bin config.tests \ |
|
|
175 | mkspecs qmake ${QT4_EXTRACT_DIRECTORIES} |
|
|
176 | do |
|
|
177 | targets+="${MY_P}/${target} " |
|
|
178 | done |
|
|
179 | |
|
|
180 | ebegin "Unpacking parts of ${tarball}:" ${targets//${MY_P}\/} |
|
|
181 | tar -xzf "${DISTDIR}/${tarball}" ${targets} |
|
|
182 | eend $? || die "failed to unpack" |
|
|
183 | ;; |
| 146 | esac |
184 | esac |
| 147 | local target targets= |
|
|
| 148 | for target in configure LICENSE.GPL3 LICENSE.LGPL projects.pro \ |
|
|
| 149 | src/{qbase,qt_targets,qt_install}.pri bin config.tests mkspecs qmake \ |
|
|
| 150 | ${QT4_EXTRACT_DIRECTORIES}; do |
|
|
| 151 | targets+=" ${unpack_p}/${target}" |
|
|
| 152 | done |
|
|
| 153 | |
|
|
| 154 | echo tar xzf "${DISTDIR}"/${MY_P}.tar.gz ${targets} |
|
|
| 155 | tar xzf "${DISTDIR}"/${MY_P}.tar.gz ${targets} || die |
|
|
| 156 | case "${PV}" in |
|
|
| 157 | 4.8.0_*) |
|
|
| 158 | mv ${WORKDIR}/qt-everywhere-opensource-src-${PV/_*} \ |
|
|
| 159 | ${WORKDIR}/qt-everywhere-opensource-src-${MY_PV} |
|
|
| 160 | ;; |
|
|
| 161 | esac |
|
|
| 162 | } |
185 | } |
| 163 | |
186 | |
| 164 | # @ECLASS-VARIABLE: PATCHES |
187 | # @ECLASS-VARIABLE: PATCHES |
|
|
188 | # @DEFAULT_UNSET |
| 165 | # @DESCRIPTION: |
189 | # @DESCRIPTION: |
| 166 | # In case you have patches to apply, specify them in PATCHES variable. Make sure |
190 | # PATCHES array variable containing all various patches to be applied. |
| 167 | # to specify the full path. This variable is necessary for src_prepare phase. |
191 | # This variable is expected to be defined in global scope of ebuild. |
| 168 | # example: |
192 | # Make sure to specify the full path. This variable is utilised in |
| 169 | # PATCHES="${FILESDIR}"/mypatch.patch |
193 | # src_unpack/src_prepare phase, based on EAPI. |
| 170 | # ${FILESDIR}"/mypatch2.patch" |
|
|
| 171 | # |
194 | # |
|
|
195 | # @CODE |
|
|
196 | # PATCHES=( "${FILESDIR}/mypatch.patch" |
|
|
197 | # "${FILESDIR}/patches_folder/" ) |
|
|
198 | # @CODE |
| 172 | |
199 | |
| 173 | # @FUNCTION: qt4-build_src_prepare |
200 | # @FUNCTION: qt4-build_src_prepare |
| 174 | # @DESCRIPTION: |
201 | # @DESCRIPTION: |
| 175 | # Prepare the sources before the configure phase. Strip CFLAGS if necessary, and fix |
202 | # Prepare the sources before the configure phase. Strip CFLAGS if necessary, and fix |
| 176 | # source files in order to respect CFLAGS/CXXFLAGS/LDFLAGS specified on /etc/make.conf. |
203 | # the build system in order to respect CFLAGS/CXXFLAGS/LDFLAGS specified in /etc/make.conf. |
| 177 | qt4-build_src_prepare() { |
204 | qt4-build_src_prepare() { |
| 178 | setqtenv |
205 | setqtenv |
| 179 | cd "${S}" |
|
|
| 180 | |
206 | |
| 181 | # fix qt 4.7 regression that skips -fvisibility=hidden |
207 | if [[ ${QT4_BUILD_TYPE} == live ]]; then |
| 182 | if version_is_at_least "4.7.0_beta1"; then |
208 | QTDIR="." ./bin/syncqt || die "syncqt failed" |
| 183 | sed -e "s/^gcc|g++)/*gcc|*g++)/" \ |
|
|
| 184 | -i config.tests/unix/fvisibility.test || |
|
|
| 185 | die "visibility fixing sed failed" |
|
|
| 186 | fi |
209 | fi |
| 187 | |
210 | |
| 188 | if version_is_at_least "4.7"; then |
211 | if version_is_at_least 4.7; then |
| 189 | # fix libX11 dependency on non X packages |
212 | # avoid X11 dependency in non-gui packages |
| 190 | local nolibx11_pkgs="qt-core qt-dbus qt-script qt-sql qt-test qt-xmlpatterns" |
213 | local nolibx11_pkgs="qt-core qt-dbus qt-script qt-sql qt-test qt-xmlpatterns" |
| 191 | has ${PN} ${nolibx11_pkgs} && qt_nolibx11 |
214 | has ${PN} ${nolibx11_pkgs} && qt_nolibx11 |
| 192 | |
|
|
| 193 | qt_assistant_cleanup |
|
|
| 194 | fi |
215 | fi |
| 195 | |
216 | |
| 196 | if use aqua; then |
217 | if use aqua; then |
| 197 | # provide a proper macx-g++-64 |
218 | # provide a proper macx-g++-64 |
| 198 | use x64-macos && ln -s macx-g++ mkspecs/$(qt_mkspecs_dir) |
219 | use x64-macos && ln -s macx-g++ mkspecs/$(qt_mkspecs_dir) |
| 199 | |
220 | |
| 200 | sed -e '/^CONFIG/s:app_bundle::' \ |
221 | sed -e '/^CONFIG/s:app_bundle::' \ |
| 201 | -e '/^CONFIG/s:plugin_no_soname:plugin_with_soname absolute_library_soname:' \ |
222 | -e '/^CONFIG/s:plugin_no_soname:plugin_with_soname absolute_library_soname:' \ |
| 202 | -i mkspecs/$(qt_mkspecs_dir)/qmake.conf || die "sed failed" |
223 | -i mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
| 203 | fi |
224 | fi |
| 204 | |
225 | |
| 205 | if [[ ${PN} != qt-core ]]; then |
226 | if [[ ${PN} != qt-core ]]; then |
| 206 | skip_qmake_build |
227 | skip_qmake_build |
| 207 | skip_project_generation |
228 | skip_project_generation |
| 208 | symlink_binaries_to_buildtree |
229 | symlink_binaries_to_buildtree |
| 209 | fi |
230 | fi |
| 210 | |
231 | |
| 211 | if [[ ${CHOST} == *86*-apple-darwin* ]] ; then |
232 | if [[ ${CHOST} == *86*-apple-darwin* ]]; then |
| 212 | # qmake bus errors with -O2 but -O3 works |
233 | # qmake bus errors with -O2 or -O3 but -O1 works |
|
|
234 | # Bug 373061 |
| 213 | replace-flags -O2 -O3 |
235 | replace-flags -O[23] -O1 |
| 214 | fi |
236 | fi |
| 215 | |
237 | |
| 216 | # Bug 178652 |
238 | # Bug 178652 |
| 217 | if [[ $(gcc-major-version) == 3 ]] && use amd64; then |
239 | if [[ $(gcc-major-version) == 3 ]] && use amd64; then |
| 218 | ewarn "Appending -fno-gcse to CFLAGS/CXXFLAGS" |
240 | ewarn "Appending -fno-gcse to CFLAGS/CXXFLAGS" |
| 219 | append-flags -fno-gcse |
241 | append-flags -fno-gcse |
| 220 | fi |
242 | fi |
| 221 | |
243 | |
| 222 | if use_if_iuse c++0x; then |
244 | if use_if_iuse c++0x; then |
| 223 | ewarn "You are about to build Qt4 using the C++11 standard. Even though" |
|
|
| 224 | ewarn "this is an official standard, some of the reverse dependencies" |
|
|
| 225 | ewarn "may fail to compile or link againt the Qt4 libraries. Before" |
|
|
| 226 | ewarn "reporting a bug, make sure your bug is reproducible with c++0x" |
|
|
| 227 | ewarn "disabled." |
|
|
| 228 | append-flags -std=c++0x |
245 | append-cxxflags -std=c++0x |
| 229 | fi |
246 | fi |
| 230 | |
247 | |
| 231 | # Unsupported old gcc versions - hardened needs this :( |
248 | # Unsupported old gcc versions - hardened needs this :( |
| 232 | if [[ $(gcc-major-version) -lt 4 ]] ; then |
249 | if [[ $(gcc-major-version) -lt 4 ]]; then |
| 233 | ewarn "Appending -fno-stack-protector to CXXFLAGS" |
250 | ewarn "Appending -fno-stack-protector to CXXFLAGS" |
| 234 | append-cxxflags -fno-stack-protector |
251 | append-cxxflags -fno-stack-protector |
| 235 | # Bug 253127 |
252 | # Bug 253127 |
| 236 | sed -e "/^QMAKE_CFLAGS\t/ s:$: -fno-stack-protector-all:" \ |
253 | sed -e "/^QMAKE_CFLAGS\t/ s:$: -fno-stack-protector-all:" \ |
| 237 | -i "${S}"/mkspecs/common/g++.conf || die "sed ${S}/mkspecs/common/g++.conf failed" |
254 | -i mkspecs/common/g++.conf || die |
| 238 | fi |
255 | fi |
| 239 | |
256 | |
| 240 | # Bug 261632 |
257 | # Bug 261632 |
| 241 | if use ppc64; then |
258 | if use ppc64; then |
| 242 | ewarn "Appending -mminimal-toc to CFLAGS/CXXFLAGS" |
259 | ewarn "Appending -mminimal-toc to CFLAGS/CXXFLAGS" |
| 243 | append-flags -mminimal-toc |
260 | append-flags -mminimal-toc |
| 244 | fi |
261 | fi |
| 245 | |
262 | |
| 246 | # Bug 282984 && Bug 295530 |
263 | # Respect CC, CXX, {C,CXX,LD}FLAGS in .qmake.cache |
| 247 | sed -e "s:\(^SYSTEM_VARIABLES\):CC=\"$(tc-getCC)\"\nCXX=\"$(tc-getCXX)\"\nCFLAGS=\"${CFLAGS}\"\nCXXFLAGS=\"${CXXFLAGS}\"\nLDFLAGS=\"${LDFLAGS}\"\n\1:" \ |
264 | sed -e "/^SYSTEM_VARIABLES=/i \ |
| 248 | -i configure || die "sed qmake compilers failed" |
265 | CC='$(tc-getCC)'\n\ |
|
|
266 | CXX='$(tc-getCXX)'\n\ |
|
|
267 | CFLAGS='${CFLAGS}'\n\ |
|
|
268 | CXXFLAGS='${CXXFLAGS}'\n\ |
|
|
269 | LDFLAGS='${LDFLAGS}'\n\ |
|
|
270 | QMakeVar set QMAKE_CFLAGS_RELEASE\n\ |
|
|
271 | QMakeVar set QMAKE_CFLAGS_DEBUG\n\ |
|
|
272 | QMakeVar set QMAKE_CXXFLAGS_RELEASE\n\ |
|
|
273 | QMakeVar set QMAKE_CXXFLAGS_DEBUG\n\ |
|
|
274 | QMakeVar set QMAKE_LFLAGS_RELEASE\n\ |
|
|
275 | QMakeVar set QMAKE_LFLAGS_DEBUG\n"\ |
|
|
276 | -i configure \ |
|
|
277 | || die "sed SYSTEM_VARIABLES failed" |
| 249 | |
278 | |
| 250 | # Bug 321335 |
279 | # Respect CC, CXX, LINK and *FLAGS in config.tests |
|
|
280 | find config.tests/unix -name '*.test' -type f -print0 | xargs -0 \ |
|
|
281 | sed -i -e "/bin\/qmake/ s: \"QT_BUILD_TREE=: \ |
|
|
282 | 'QMAKE_CC=$(tc-getCC)' 'QMAKE_CXX=$(tc-getCXX)' 'QMAKE_LINK=$(tc-getCXX)' \ |
|
|
283 | 'QMAKE_CFLAGS+=${CFLAGS}' 'QMAKE_CXXFLAGS+=${CXXFLAGS}' 'QMAKE_LFLAGS+=${LDFLAGS}'&:" \ |
|
|
284 | || die "sed config.tests failed" |
|
|
285 | |
| 251 | if version_is_at_least 4.6; then |
286 | if ! version_is_at_least 4.8; then |
| 252 | find ./config.tests/unix -name "*.test" -type f -exec grep -lZ \$MAKE '{}' \; | \ |
287 | # Strip predefined CFLAGS from mkspecs (bugs 312689 and 352778) |
| 253 | xargs -0 \ |
288 | sed -i -e '/^QMAKE_CFLAGS_RELEASE/s:+=.*:+=:' mkspecs/common/g++.conf || die |
| 254 | sed -e "s:\(\$MAKE\):\1 CC=\"$(tc-getCC)\" CXX=\"$(tc-getCXX)\" LD=\"$(tc-getCXX)\" LINK=\"$(tc-getCXX)\":g" \ |
|
|
| 255 | -i || die "sed test compilers failed" |
|
|
| 256 | fi |
289 | fi |
| 257 | |
290 | |
| 258 | # Bug 172219 |
291 | # Bug 172219 |
| 259 | sed -e "s:X11R6/::" \ |
292 | sed -e 's:/X11R6/:/:' -i mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
| 260 | -i "${S}"/mkspecs/$(qt_mkspecs_dir)/qmake.conf || die "sed ${S}/mkspecs/$(qt_mkspecs_dir)/qmake.conf failed" |
|
|
| 261 | |
293 | |
| 262 | if [[ ${CHOST} == *-darwin* ]]; then |
294 | if [[ ${CHOST} == *-darwin* ]]; then |
| 263 | # Set FLAGS *and* remove -arch, since our gcc-apple is multilib |
295 | # Set FLAGS *and* remove -arch, since our gcc-apple is multilib |
| 264 | # crippled (by design) :/ |
296 | # crippled (by design) :/ |
|
|
297 | local mac_gpp_conf= |
|
|
298 | if [[ -f mkspecs/common/mac-g++.conf ]]; then |
|
|
299 | # qt < 4.8 has mac-g++.conf |
|
|
300 | mac_gpp_conf="mkspecs/common/mac-g++.conf" |
|
|
301 | elif [[ -f mkspecs/common/g++-macx.conf ]]; then |
|
|
302 | # qt >= 4.8 has g++-macx.conf |
|
|
303 | mac_gpp_conf="mkspecs/common/g++-macx.conf" |
|
|
304 | else |
|
|
305 | die "no known conf file for mac found" |
|
|
306 | fi |
|
|
307 | sed \ |
| 265 | sed -e "s:QMAKE_CFLAGS_RELEASE.*=.*:QMAKE_CFLAGS_RELEASE=${CFLAGS}:" \ |
308 | -e "s:QMAKE_CFLAGS_RELEASE.*=.*:QMAKE_CFLAGS_RELEASE=${CFLAGS}:" \ |
| 266 | -e "s:QMAKE_CXXFLAGS_RELEASE.*=.*:QMAKE_CXXFLAGS_RELEASE=${CXXFLAGS}:" \ |
309 | -e "s:QMAKE_CXXFLAGS_RELEASE.*=.*:QMAKE_CXXFLAGS_RELEASE=${CXXFLAGS}:" \ |
| 267 | -e "s:QMAKE_LFLAGS_RELEASE.*=.*:QMAKE_LFLAGS_RELEASE=-headerpad_max_install_names ${LDFLAGS}:" \ |
310 | -e "s:QMAKE_LFLAGS_RELEASE.*=.*:QMAKE_LFLAGS_RELEASE=-headerpad_max_install_names ${LDFLAGS}:" \ |
| 268 | -e "s:-arch\s\w*::g" \ |
311 | -e "s:-arch\s\w*::g" \ |
| 269 | -i mkspecs/common/mac-g++.conf || die "sed mkspecs/common/mac-g++.conf failed" |
312 | -i ${mac_gpp_conf} \ |
|
|
313 | || die "sed ${mac_gpp_conf} failed" |
| 270 | |
314 | |
| 271 | # Fix configure's -arch settings that appear in qmake/Makefile and also |
315 | # Fix configure's -arch settings that appear in qmake/Makefile and also |
| 272 | # fix arch handling (automagically duplicates our -arch arg and breaks |
316 | # fix arch handling (automagically duplicates our -arch arg and breaks |
| 273 | # pch). Additionally disable Xarch support. |
317 | # pch). Additionally disable Xarch support. |
|
|
318 | local mac_gcc_confs="${mac_gpp_conf}" |
|
|
319 | if [[ -f mkspecs/common/gcc-base-macx.conf ]]; then |
|
|
320 | mac_gcc_confs+=" mkspecs/common/gcc-base-macx.conf" |
|
|
321 | fi |
| 274 | sed \ |
322 | sed \ |
| 275 | -e "s:-arch i386::" \ |
323 | -e "s:-arch i386::" \ |
| 276 | -e "s:-arch ppc::" \ |
324 | -e "s:-arch ppc::" \ |
| 277 | -e "s:-arch x86_64::" \ |
325 | -e "s:-arch x86_64::" \ |
| 278 | -e "s:-arch ppc64::" \ |
326 | -e "s:-arch ppc64::" \ |
| 279 | -e "s:-arch \$i::" \ |
327 | -e "s:-arch \$i::" \ |
| 280 | -e "/if \[ ! -z \"\$NATIVE_64_ARCH\" \]; then/,/fi/ d" \ |
328 | -e "/if \[ ! -z \"\$NATIVE_64_ARCH\" \]; then/,/fi/ d" \ |
| 281 | -e "s:CFG_MAC_XARCH=yes:CFG_MAC_XARCH=no:g" \ |
329 | -e "s:CFG_MAC_XARCH=yes:CFG_MAC_XARCH=no:g" \ |
| 282 | -e "s:-Xarch_x86_64::g" \ |
330 | -e "s:-Xarch_x86_64::g" \ |
| 283 | -e "s:-Xarch_ppc64::g" \ |
331 | -e "s:-Xarch_ppc64::g" \ |
| 284 | -i configure mkspecs/common/mac-g++.conf || die "sed configure failed" |
332 | -i configure ${mac_gcc_confs} \ |
|
|
333 | || die "sed -arch/-Xarch failed" |
| 285 | |
334 | |
| 286 | # On Snow Leopard don't fall back to 10.5 deployment target. |
335 | # On Snow Leopard don't fall back to 10.5 deployment target. |
| 287 | if [[ ${CHOST} == *-apple-darwin10 ]] ; then |
336 | if [[ ${CHOST} == *-apple-darwin10 ]]; then |
| 288 | sed -e "s:QMakeVar set QMAKE_MACOSX_DEPLOYMENT_TARGET.*:QMakeVar set QMAKE_MACOSX_DEPLOYMENT_TARGET 10.6:g" \ |
337 | sed -e "s:QMakeVar set QMAKE_MACOSX_DEPLOYMENT_TARGET.*:QMakeVar set QMAKE_MACOSX_DEPLOYMENT_TARGET 10.6:g" \ |
| 289 | -e "s:-mmacosx-version-min=10.[0-9]:-mmacosx-version-min=10.6:g" \ |
338 | -e "s:-mmacosx-version-min=10.[0-9]:-mmacosx-version-min=10.6:g" \ |
| 290 | -i configure mkspecs/common/mac-g++.conf || die "sed configure failed" |
339 | -i configure ${mac_gpp_conf} \ |
|
|
340 | || die "sed deployment target failed" |
| 291 | fi |
341 | fi |
| 292 | fi |
342 | fi |
| 293 | |
343 | |
| 294 | # this one is needed for all systems with a separate -liconv, apart from |
344 | # this one is needed for all systems with a separate -liconv, apart from |
| 295 | # Darwin, for which the sources already cater for -liconv |
345 | # Darwin, for which the sources already cater for -liconv |
| 296 | if use !elibc_glibc && [[ ${CHOST} != *-darwin* ]] ; then |
346 | if use !elibc_glibc && [[ ${CHOST} != *-darwin* ]]; then |
| 297 | sed \ |
347 | sed -e 's|mac:\(LIBS += -liconv\)|\1|g' \ |
| 298 | -e "s|mac:LIBS += -liconv|LIBS += -liconv|g" \ |
|
|
| 299 | -i config.tests/unix/iconv/iconv.pro \ |
348 | -i config.tests/unix/iconv/iconv.pro \ |
| 300 | || die "sed on iconv.pro failed" |
349 | || die "sed iconv.pro failed" |
| 301 | fi |
350 | fi |
| 302 | |
351 | |
| 303 | # we need some patches for Solaris |
352 | # we need some patches for Solaris |
| 304 | sed -i \ |
|
|
| 305 | -e '/^QMAKE_LFLAGS_THREAD/a\QMAKE_LFLAGS_DYNAMIC_LIST = -Wl,--dynamic-list,' \ |
353 | sed -i -e '/^QMAKE_LFLAGS_THREAD/a\QMAKE_LFLAGS_DYNAMIC_LIST = -Wl,--dynamic-list,' \ |
| 306 | mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
354 | mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
| 307 | # use GCC over SunStudio |
355 | # use GCC over SunStudio |
| 308 | sed -i -e '/PLATFORM=solaris-cc/s/cc/g++/' configure || die |
356 | sed -i -e '/PLATFORM=solaris-cc/s/cc/g++/' configure || die |
| 309 | # don't flirt with non-Prefix stuff, we're quite possessive |
357 | # do not flirt with non-Prefix stuff, we're quite possessive |
| 310 | sed -i -e '/^QMAKE_\(LIB\|INC\)DIR\(_X11\|_OPENGL\|\)\t/s/=.*$/=/' \ |
358 | sed -i -e '/^QMAKE_\(LIB\|INC\)DIR\(_X11\|_OPENGL\|\)\t/s/=.*$/=/' \ |
| 311 | mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
359 | mkspecs/$(qt_mkspecs_dir)/qmake.conf || die |
| 312 | # strip predefined CFLAGS from qmake ( bug #312689 ) |
|
|
| 313 | sed -i '/^QMAKE_CFLAGS_RELEASE/s:+=.*:+=:' mkspecs/common/g++.conf |
|
|
| 314 | |
360 | |
| 315 | base_src_prepare |
361 | # apply patches |
|
|
362 | [[ -n ${PATCHES[@]} ]] && epatch "${PATCHES[@]}" |
|
|
363 | epatch_user |
| 316 | } |
364 | } |
| 317 | |
365 | |
| 318 | # @FUNCTION: qt4-build_src_configure |
366 | # @FUNCTION: qt4-build_src_configure |
| 319 | # @DESCRIPTION: |
367 | # @DESCRIPTION: |
| 320 | # Default configure phase |
368 | # Default configure phase |
| 321 | qt4-build_src_configure() { |
369 | qt4-build_src_configure() { |
| 322 | setqtenv |
370 | setqtenv |
| 323 | myconf="$(standard_configure_options) ${myconf}" |
371 | |
|
|
372 | local conf=" |
|
|
373 | -prefix ${QTPREFIXDIR} |
|
|
374 | -bindir ${QTBINDIR} |
|
|
375 | -libdir ${QTLIBDIR} |
|
|
376 | -docdir ${QTDOCDIR} |
|
|
377 | -headerdir ${QTHEADERDIR} |
|
|
378 | -plugindir ${QTPLUGINDIR} |
|
|
379 | $(version_is_at_least 4.7 && echo -importdir ${QTIMPORTDIR}) |
|
|
380 | -datadir ${QTDATADIR} |
|
|
381 | -translationdir ${QTTRANSDIR} |
|
|
382 | -sysconfdir ${QTSYSCONFDIR} |
|
|
383 | -examplesdir ${QTEXAMPLESDIR} |
|
|
384 | -demosdir ${QTDEMOSDIR} |
|
|
385 | -opensource -confirm-license |
|
|
386 | -shared -fast -largefile -stl -verbose |
|
|
387 | -nomake examples -nomake demos" |
|
|
388 | |
|
|
389 | # ARCH is set on Gentoo. Qt now falls back to generic on an unsupported |
|
|
390 | # $(tc-arch). Therefore we convert it to supported values. |
|
|
391 | case "$(tc-arch)" in |
|
|
392 | amd64|x64-*) conf+=" -arch x86_64" ;; |
|
|
393 | ppc-macos) conf+=" -arch ppc" ;; |
|
|
394 | ppc|ppc64|ppc-*) conf+=" -arch powerpc" ;; |
|
|
395 | sparc|sparc-*|sparc64-*) conf+=" -arch sparc" ;; |
|
|
396 | x86-macos) conf+=" -arch x86" ;; |
|
|
397 | x86|x86-*) conf+=" -arch i386" ;; |
|
|
398 | alpha|arm|ia64|mips|s390) conf+=" -arch $(tc-arch)" ;; |
|
|
399 | hppa|sh) conf+=" -arch generic" ;; |
|
|
400 | *) die "$(tc-arch) is unsupported by this eclass. Please file a bug." ;; |
|
|
401 | esac |
|
|
402 | |
|
|
403 | conf+=" -platform $(qt_mkspecs_dir)" |
|
|
404 | |
|
|
405 | [[ $(get_libdir) != lib ]] && conf+=" -L${EPREFIX}/usr/$(get_libdir)" |
|
|
406 | |
|
|
407 | # debug/release |
|
|
408 | if use debug; then |
|
|
409 | conf+=" -debug" |
|
|
410 | else |
|
|
411 | conf+=" -release" |
|
|
412 | fi |
|
|
413 | conf+=" -no-separate-debug-info" |
|
|
414 | |
|
|
415 | # exceptions USE flag |
|
|
416 | conf+=" $(in_iuse exceptions && qt_use exceptions || echo -exceptions)" |
|
|
417 | |
|
|
418 | # disable rpath on Qt >= 4.8 (bug 380415) |
|
|
419 | # but leave it enabled on prefix (bug 417169) |
|
|
420 | version_is_at_least 4.8 && use !prefix && conf+=" -no-rpath" |
|
|
421 | |
|
|
422 | # precompiled headers don't work on hardened, where the flag is masked |
|
|
423 | conf+=" $(qt_use pch)" |
|
|
424 | |
|
|
425 | # -reduce-relocations |
|
|
426 | # This flag seems to introduce major breakage to applications, |
|
|
427 | # mostly to be seen as a core dump with the message "QPixmap: Must |
|
|
428 | # construct a QApplication before a QPaintDevice" on Solaris. |
|
|
429 | # -- Daniel Vergien |
|
|
430 | [[ ${CHOST} != *-solaris* ]] && conf+=" -reduce-relocations" |
| 324 | |
431 | |
| 325 | # this one is needed for all systems with a separate -liconv, apart from |
432 | # this one is needed for all systems with a separate -liconv, apart from |
| 326 | # Darwin, for which the sources already cater for -liconv |
433 | # Darwin, for which the sources already cater for -liconv |
| 327 | use !elibc_glibc && [[ ${CHOST} != *-darwin* ]] && \ |
434 | if use !elibc_glibc && [[ ${CHOST} != *-darwin* ]]; then |
| 328 | myconf+=" -liconv" |
435 | conf+=" -liconv" |
|
|
436 | fi |
| 329 | |
437 | |
| 330 | if use_if_iuse glib; then |
438 | if use_if_iuse glib; then |
| 331 | # use -I, -L and -l from configure |
|
|
| 332 | local glibflags="$(pkg-config --cflags --libs glib-2.0 gthread-2.0)" |
439 | local glibflags="$(pkg-config --cflags --libs glib-2.0 gthread-2.0)" |
| 333 | # avoid the -pthread argument |
440 | # avoid the -pthread argument |
| 334 | myconf+=" ${glibflags//-pthread}" |
441 | conf+=" ${glibflags//-pthread}" |
| 335 | unset glibflags |
442 | unset glibflags |
| 336 | fi |
443 | fi |
| 337 | |
444 | |
| 338 | if use_if_iuse qpa; then |
445 | if use_if_iuse qpa; then |
| 339 | ewarn |
446 | echo |
| 340 | ewarn "The qpa useflag enables the Qt Platform Abstraction, formely" |
447 | ewarn "The qpa useflag enables the Qt Platform Abstraction, formely" |
| 341 | ewarn "known as Qt Lighthouse. If you are not sure what that is, then" |
448 | ewarn "known as Qt Lighthouse. If you are not sure what that is, then" |
| 342 | ewarn "disable it before reporting any bugs related to this useflag." |
449 | ewarn "disable it before reporting any bugs related to this useflag." |
| 343 | ewarn |
450 | echo |
| 344 | myconf+=" -qpa" |
451 | conf+=" -qpa" |
| 345 | fi |
452 | fi |
| 346 | |
453 | |
| 347 | if use aqua ; then |
454 | if use aqua; then |
| 348 | # On (snow) leopard use the new (frameworked) cocoa code. |
455 | # On (snow) leopard use the new (frameworked) cocoa code. |
| 349 | if [[ ${CHOST##*-darwin} -ge 9 ]] ; then |
456 | if [[ ${CHOST##*-darwin} -ge 9 ]]; then |
| 350 | myconf+=" -cocoa -framework" |
457 | conf+=" -cocoa -framework" |
|
|
458 | # We need the source's headers, not the installed ones. |
|
|
459 | conf+=" -I${S}/include" |
|
|
460 | # Add hint for the framework location. |
|
|
461 | conf+=" -F${QTLIBDIR}" |
| 351 | |
462 | |
| 352 | # We are crazy and build cocoa + qt3support :-) |
463 | # We are crazy and build cocoa + qt3support :-) |
| 353 | if use qt3support; then |
464 | if use qt3support; then |
| 354 | sed -e "/case \"\$PLATFORM,\$CFG_MAC_COCOA\" in/,/;;/ s|CFG_QT3SUPPORT=\"no\"|CFG_QT3SUPPORT=\"yes\"|" \ |
465 | sed -e "/case \"\$PLATFORM,\$CFG_MAC_COCOA\" in/,/;;/ s|CFG_QT3SUPPORT=\"no\"|CFG_QT3SUPPORT=\"yes\"|" \ |
| 355 | -i configure |
466 | -i configure || die |
| 356 | fi |
467 | fi |
| 357 | |
468 | else |
| 358 | # We need the source's headers, not the installed ones. |
469 | conf+=" -no-framework" |
| 359 | myconf+=" -I${S}/include" |
|
|
| 360 | |
|
|
| 361 | # Add hint for the framework location. |
|
|
| 362 | myconf+=" -F${QTLIBDIR}" |
|
|
| 363 | fi |
470 | fi |
| 364 | else |
471 | else |
| 365 | # freetype2 include dir is non-standard, thus include it on configure |
472 | # freetype2 include dir is non-standard, thus pass it to configure |
| 366 | # use -I from configure |
|
|
| 367 | myconf+=" $(pkg-config --cflags freetype2)" |
473 | conf+=" $(pkg-config --cflags-only-I freetype2)" |
| 368 | fi |
474 | fi |
| 369 | |
475 | |
| 370 | # Disable SSE4.x, since auto-detection is currently broken |
476 | conf+=" ${myconf}" |
| 371 | # Upstream bug http://bugreports.qt.nokia.com/browse/QTBUG-13623 |
477 | myconf= |
| 372 | [[ ${PV} == "4.7.1" ]] && myconf+=" -no-sse4.1 -no-sse4.2" |
|
|
| 373 | |
478 | |
| 374 | echo ./configure ${myconf} |
479 | echo ./configure ${conf} |
| 375 | ./configure ${myconf} || die "./configure failed" |
480 | ./configure ${conf} || die "./configure failed" |
| 376 | myconf="" |
|
|
| 377 | |
481 | |
| 378 | prepare_directories ${QT4_TARGET_DIRECTORIES} |
482 | prepare_directories ${QT4_TARGET_DIRECTORIES} |
| 379 | } |
483 | } |
| 380 | |
484 | |
| 381 | # @FUNCTION: qt4-build_src_compile |
485 | # @FUNCTION: qt4-build_src_compile |
| … | |
… | |
| 389 | |
493 | |
| 390 | # @FUNCTION: qt4-build_src_test |
494 | # @FUNCTION: qt4-build_src_test |
| 391 | # @DESCRIPTION: |
495 | # @DESCRIPTION: |
| 392 | # Runs tests only in target directories. |
496 | # Runs tests only in target directories. |
| 393 | qt4-build_src_test() { |
497 | qt4-build_src_test() { |
|
|
498 | # QtMultimedia does not have any test suite (bug #332299) |
|
|
499 | [[ ${PN} == qt-multimedia ]] && return |
|
|
500 | |
| 394 | for dir in ${QT4_TARGET_DIRECTORIES}; do |
501 | for dir in ${QT4_TARGET_DIRECTORIES}; do |
| 395 | emake -j1 check -C ${dir} |
502 | emake -j1 check -C ${dir} |
| 396 | done |
503 | done |
| 397 | } |
504 | } |
| 398 | |
505 | |
| 399 | # @FUNCTION: fix_includes |
506 | # @FUNCTION: fix_includes |
| 400 | # @DESCRIPTION: |
507 | # @DESCRIPTION: |
| 401 | # For MacOSX we need to add some symlinks when frameworks are |
508 | # For MacOS X we need to add some symlinks when frameworks are |
| 402 | # being used, to avoid complications with some more or less stupid packages. |
509 | # being used, to avoid complications with some more or less stupid packages. |
| 403 | fix_includes() { |
510 | fix_includes() { |
| 404 | if use aqua && [[ ${CHOST##*-darwin} -ge 9 ]] ; then |
511 | if use aqua && [[ ${CHOST##*-darwin} -ge 9 ]]; then |
|
|
512 | local frw dest f h rdir |
| 405 | # Some packages tend to include <Qt/...> |
513 | # Some packages tend to include <Qt/...> |
| 406 | dodir "${QTHEADERDIR#${EPREFIX}}"/Qt |
514 | dodir "${QTHEADERDIR#${EPREFIX}}"/Qt |
| 407 | |
515 | |
| 408 | # Fake normal headers when frameworks are installed... eases life later on |
516 | # Fake normal headers when frameworks are installed... eases life later |
| 409 | local dest f |
517 | # on, make sure we use relative links though, as some ebuilds assume |
|
|
518 | # these dirs exist in src_install to add additional files |
|
|
519 | f=${QTHEADERDIR} |
|
|
520 | h=${QTLIBDIR} |
|
|
521 | while [[ -n ${f} && ${f%%/*} == ${h%%/*} ]] ; do |
|
|
522 | f=${f#*/} |
|
|
523 | h=${h#*/} |
|
|
524 | done |
|
|
525 | rdir=${h} |
|
|
526 | f="../" |
|
|
527 | while [[ ${h} == */* ]] ; do |
|
|
528 | f="${f}../" |
|
|
529 | h=${h#*/} |
|
|
530 | done |
|
|
531 | rdir="${f}${rdir}" |
|
|
532 | |
| 410 | for frw in "${D}${QTLIBDIR}"/*.framework; do |
533 | for frw in "${D}${QTLIBDIR}"/*.framework; do |
| 411 | [[ -e "${frw}"/Headers ]] || continue |
534 | [[ -e "${frw}"/Headers ]] || continue |
| 412 | f=$(basename ${frw}) |
535 | f=$(basename ${frw}) |
| 413 | dest="${QTHEADERDIR#${EPREFIX}}"/${f%.framework} |
536 | dest="${QTHEADERDIR#${EPREFIX}}"/${f%.framework} |
| 414 | dosym "${QTLIBDIR#${EPREFIX}}"/${f}/Headers "${dest}" |
537 | dosym "${rdir}"/${f}/Headers "${dest}" |
| 415 | |
538 | |
| 416 | # Link normal headers as well. |
539 | # Link normal headers as well. |
| 417 | for hdr in "${D}/${QTLIBDIR}/${f}"/Headers/*; do |
540 | for hdr in "${D}/${QTLIBDIR}/${f}"/Headers/*; do |
| 418 | h=$(basename ${hdr}) |
541 | h=$(basename ${hdr}) |
| 419 | dosym "${QTLIBDIR#${EPREFIX}}"/${f}/Headers/${h} "${QTHEADERDIR#${EPREFIX}}"/Qt/${h} |
542 | dosym "../${rdir}"/${f}/Headers/${h} \ |
|
|
543 | "${QTHEADERDIR#${EPREFIX}}"/Qt/${h} |
| 420 | done |
544 | done |
| 421 | done |
545 | done |
| 422 | fi |
546 | fi |
| 423 | } |
547 | } |
| 424 | |
548 | |
| … | |
… | |
| 433 | install_qconfigs |
557 | install_qconfigs |
| 434 | fix_library_files |
558 | fix_library_files |
| 435 | fix_includes |
559 | fix_includes |
| 436 | |
560 | |
| 437 | # remove .la files since we are building only shared Qt libraries |
561 | # remove .la files since we are building only shared Qt libraries |
| 438 | find "${D}"${QTLIBDIR} -name "*.la" -print0 | xargs -0 rm |
562 | find "${D}"${QTLIBDIR} -type f -name '*.la' -print0 | xargs -0 rm -f |
| 439 | } |
563 | } |
| 440 | |
564 | |
| 441 | # @FUNCTION: setqtenv |
565 | # @FUNCTION: setqtenv |
|
|
566 | # @INTERNAL |
| 442 | setqtenv() { |
567 | setqtenv() { |
| 443 | # Set up installation directories |
568 | # Set up installation directories |
| 444 | QTBASEDIR=${EPREFIX}/usr/$(get_libdir)/qt4 |
|
|
| 445 | QTPREFIXDIR=${EPREFIX}/usr |
569 | QTPREFIXDIR=${EPREFIX}/usr |
| 446 | QTBINDIR=${EPREFIX}/usr/bin |
570 | QTBINDIR=${EPREFIX}/usr/bin |
| 447 | QTLIBDIR=${EPREFIX}/usr/$(get_libdir)/qt4 |
571 | QTLIBDIR=${EPREFIX}/usr/$(get_libdir)/qt4 |
| 448 | QMAKE_LIBDIR_QT=${QTLIBDIR} |
|
|
| 449 | QTPCDIR=${EPREFIX}/usr/$(get_libdir)/pkgconfig |
572 | QTPCDIR=${EPREFIX}/usr/$(get_libdir)/pkgconfig |
| 450 | QTDATADIR=${EPREFIX}/usr/share/qt4 |
|
|
| 451 | QTDOCDIR=${EPREFIX}/usr/share/doc/qt-${PV} |
573 | QTDOCDIR=${EPREFIX}/usr/share/doc/qt-${PV} |
| 452 | QTHEADERDIR=${EPREFIX}/usr/include/qt4 |
574 | QTHEADERDIR=${EPREFIX}/usr/include/qt4 |
| 453 | QTPLUGINDIR=${QTLIBDIR}/plugins |
575 | QTPLUGINDIR=${QTLIBDIR}/plugins |
|
|
576 | QTIMPORTDIR=${QTLIBDIR}/imports |
|
|
577 | QTDATADIR=${EPREFIX}/usr/share/qt4 |
|
|
578 | QTTRANSDIR=${QTDATADIR}/translations |
| 454 | QTSYSCONFDIR=${EPREFIX}/etc/qt4 |
579 | QTSYSCONFDIR=${EPREFIX}/etc/qt4 |
| 455 | QTTRANSDIR=${QTDATADIR}/translations |
|
|
| 456 | QTEXAMPLESDIR=${QTDATADIR}/examples |
580 | QTEXAMPLESDIR=${QTDATADIR}/examples |
| 457 | QTDEMOSDIR=${QTDATADIR}/demos |
581 | QTDEMOSDIR=${QTDATADIR}/demos |
|
|
582 | QMAKE_LIBDIR_QT=${QTLIBDIR} |
| 458 | QT_INSTALL_PREFIX=${EPREFIX}/usr/$(get_libdir)/qt4 |
583 | QT_INSTALL_PREFIX=${EPREFIX}/usr/$(get_libdir)/qt4 |
|
|
584 | |
| 459 | PLATFORM=$(qt_mkspecs_dir) |
585 | PLATFORM=$(qt_mkspecs_dir) |
| 460 | |
|
|
| 461 | unset QMAKESPEC |
586 | unset QMAKESPEC |
| 462 | } |
|
|
| 463 | |
587 | |
| 464 | # @FUNCTION: standard_configure_options |
588 | export XDG_CONFIG_HOME="${T}" |
| 465 | # @DESCRIPTION: |
|
|
| 466 | # Sets up some standard configure options, like libdir (if necessary), whether |
|
|
| 467 | # debug info is wanted or not. |
|
|
| 468 | standard_configure_options() { |
|
|
| 469 | local myconf= |
|
|
| 470 | |
|
|
| 471 | [[ $(get_libdir) != lib ]] && myconf+=" -L${EPREFIX}/usr/$(get_libdir)" |
|
|
| 472 | |
|
|
| 473 | # Disable visibility explicitly if gcc version isn't 4 |
|
|
| 474 | if [[ $(gcc-major-version) -lt 4 ]]; then |
|
|
| 475 | myconf+=" -no-reduce-exports" |
|
|
| 476 | fi |
|
|
| 477 | |
|
|
| 478 | # precompiled headers doesn't work on hardened, where the flag is masked. |
|
|
| 479 | myconf+=" $(qt_use pch)" |
|
|
| 480 | |
|
|
| 481 | if use debug; then |
|
|
| 482 | myconf+=" -debug" |
|
|
| 483 | else |
|
|
| 484 | myconf+=" -release" |
|
|
| 485 | fi |
|
|
| 486 | myconf+=" -no-separate-debug-info" |
|
|
| 487 | |
|
|
| 488 | use aqua && myconf+=" -no-framework" |
|
|
| 489 | |
|
|
| 490 | # ARCH is set on Gentoo. Qt now falls back to generic on an unsupported |
|
|
| 491 | # $(tc-arch). Therefore we convert it to supported values. |
|
|
| 492 | case "$(tc-arch)" in |
|
|
| 493 | amd64|x64-*) myconf+=" -arch x86_64" ;; |
|
|
| 494 | ppc-macos) myconf+=" -arch ppc" ;; |
|
|
| 495 | ppc|ppc64|ppc-*) myconf+=" -arch powerpc" ;; |
|
|
| 496 | sparc|sparc-*) myconf+=" -arch sparc" ;; |
|
|
| 497 | x86-macos) myconf+=" -arch x86" ;; |
|
|
| 498 | x86|x86-*) myconf+=" -arch i386" ;; |
|
|
| 499 | alpha|arm|ia64|mips|s390|sparc) myconf+=" -arch $(tc-arch)" ;; |
|
|
| 500 | hppa|sh) myconf+=" -arch generic" ;; |
|
|
| 501 | *) die "$(tc-arch) is unsupported by this eclass. Please file a bug." ;; |
|
|
| 502 | esac |
|
|
| 503 | |
|
|
| 504 | # exceptions USE flag |
|
|
| 505 | local exceptions="-exceptions" |
|
|
| 506 | in_iuse exceptions && exceptions="$(qt_use exceptions)" |
|
|
| 507 | |
|
|
| 508 | # note about -reduce-relocations: |
|
|
| 509 | # That flag seems to introduce major breakage to applications, |
|
|
| 510 | # mostly to be seen as a core dump with the message "QPixmap: Must |
|
|
| 511 | # construct a QApplication before a QPaintDevice" on Solaris |
|
|
| 512 | # -- Daniel Vergien |
|
|
| 513 | [[ ${CHOST} != *-solaris* ]] && myconf+=" -reduce-relocations" |
|
|
| 514 | |
|
|
| 515 | myconf+=" -platform $(qt_mkspecs_dir) -stl -verbose -largefile -confirm-license |
|
|
| 516 | -prefix ${QTPREFIXDIR} -bindir ${QTBINDIR} -libdir ${QTLIBDIR} |
|
|
| 517 | -datadir ${QTDATADIR} -docdir ${QTDOCDIR} -headerdir ${QTHEADERDIR} |
|
|
| 518 | -plugindir ${QTPLUGINDIR} -sysconfdir ${QTSYSCONFDIR} |
|
|
| 519 | -translationdir ${QTTRANSDIR} -examplesdir ${QTEXAMPLESDIR} |
|
|
| 520 | -demosdir ${QTDEMOSDIR} -silent -fast -opensource |
|
|
| 521 | ${exceptions} |
|
|
| 522 | -nomake examples -nomake demos" |
|
|
| 523 | |
|
|
| 524 | echo "${myconf}" |
|
|
| 525 | } |
589 | } |
| 526 | |
590 | |
| 527 | # @FUNCTION: prepare_directories |
591 | # @FUNCTION: prepare_directories |
| 528 | # @USAGE: < directories > |
592 | # @USAGE: < directories > |
|
|
593 | # @INTERNAL |
| 529 | # @DESCRIPTION: |
594 | # @DESCRIPTION: |
| 530 | # Generates makefiles for the directories set in $QT4_TARGET_DIRECTORIES |
595 | # Generates Makefiles for the given list of directories. |
| 531 | prepare_directories() { |
596 | prepare_directories() { |
| 532 | for x in "$@"; do |
597 | for x in "$@"; do |
| 533 | pushd "${S}"/${x} >/dev/null |
598 | pushd "${S}"/${x} >/dev/null || die |
| 534 | einfo "Running qmake in: ${x}" |
599 | einfo "Running qmake in: ${x}" |
| 535 | # avoid running over the maximum argument number, bug #299810 |
600 | # avoid running over the maximum argument number, bug #299810 |
| 536 | { |
601 | { |
| 537 | echo "${S}"/mkspecs/common/*.conf |
602 | echo "${S}"/mkspecs/common/*.conf |
| 538 | find "${S}" -name '*.pr[io]' |
603 | find "${S}" -name '*.pr[io]' |
| 539 | } | xargs sed -i -e "s:\$\$\[QT_INSTALL_LIBS\]:${EPREFIX}/usr/$(get_libdir)/qt4:g" || die |
604 | } | xargs sed -i \ |
|
|
605 | -e "s:\$\$\[QT_INSTALL_LIBS\]:${QTLIBDIR}:g" \ |
|
|
606 | -e "s:\$\$\[QT_INSTALL_PLUGINS\]:${QTPLUGINDIR}:g" \ |
|
|
607 | || die |
| 540 | "${S}"/bin/qmake "LIBS+=-L${QTLIBDIR}" "CONFIG+=nostrip" || die "qmake failed" |
608 | "${S}"/bin/qmake "LIBS+=-L${QTLIBDIR}" "CONFIG+=nostrip" || die "qmake failed" |
| 541 | popd >/dev/null |
609 | popd >/dev/null || die |
| 542 | done |
610 | done |
| 543 | } |
611 | } |
| 544 | |
612 | |
| 545 | |
613 | |
| 546 | # @FUNCTION: build_directories |
614 | # @FUNCTION: build_directories |
| 547 | # @USAGE: < directories > |
615 | # @USAGE: < directories > |
|
|
616 | # @INTERNAL |
| 548 | # @DESCRIPTION: |
617 | # @DESCRIPTION: |
| 549 | # Compiles the code in $QT4_TARGET_DIRECTORIES |
618 | # Compiles the code in the given list of directories. |
| 550 | build_directories() { |
619 | build_directories() { |
| 551 | for x in "$@"; do |
620 | for x in "$@"; do |
| 552 | pushd "${S}"/${x} >/dev/null |
621 | pushd "${S}"/${x} >/dev/null || die |
| 553 | emake CC="$(tc-getCC)" \ |
622 | emake CC="$(tc-getCC)" \ |
| 554 | CXX="$(tc-getCXX)" \ |
623 | CXX="$(tc-getCXX)" \ |
| 555 | LINK="$(tc-getCXX)" || die "emake failed" |
624 | LINK="$(tc-getCXX)" || die "emake failed" |
| 556 | popd >/dev/null |
625 | popd >/dev/null || die |
| 557 | done |
626 | done |
| 558 | } |
627 | } |
| 559 | |
628 | |
| 560 | # @FUNCTION: install_directories |
629 | # @FUNCTION: install_directories |
| 561 | # @USAGE: < directories > |
630 | # @USAGE: < directories > |
|
|
631 | # @INTERNAL |
| 562 | # @DESCRIPTION: |
632 | # @DESCRIPTION: |
| 563 | # run emake install in the given directories, which are separated by spaces |
633 | # Runs emake install in the given directories, which are separated by spaces. |
| 564 | install_directories() { |
634 | install_directories() { |
| 565 | for x in "$@"; do |
635 | for x in "$@"; do |
| 566 | pushd "${S}"/${x} >/dev/null || die "Can't pushd ${S}/${x}" |
636 | pushd "${S}"/${x} >/dev/null || die |
| 567 | emake INSTALL_ROOT="${D}" install || die "emake install failed" |
637 | emake INSTALL_ROOT="${D}" install || die "emake install failed" |
| 568 | popd >/dev/null || die "Can't popd from ${S}/${x}" |
638 | popd >/dev/null || die |
| 569 | done |
639 | done |
| 570 | } |
640 | } |
| 571 | |
641 | |
| 572 | # @ECLASS-VARIABLE: QCONFIG_ADD |
642 | # @ECLASS-VARIABLE: QCONFIG_ADD |
| 573 | # @DESCRIPTION: |
643 | # @DESCRIPTION: |
| … | |
… | |
| 583 | # @DESCRIPTION: |
653 | # @DESCRIPTION: |
| 584 | # List variables that should be defined at the top of QtCore/qconfig.h |
654 | # List variables that should be defined at the top of QtCore/qconfig.h |
| 585 | : ${QCONFIG_DEFINE:=} |
655 | : ${QCONFIG_DEFINE:=} |
| 586 | |
656 | |
| 587 | # @FUNCTION: install_qconfigs |
657 | # @FUNCTION: install_qconfigs |
|
|
658 | # @INTERNAL |
| 588 | # @DESCRIPTION: |
659 | # @DESCRIPTION: |
| 589 | # Install gentoo-specific mkspecs configurations |
660 | # Install gentoo-specific mkspecs configurations. |
| 590 | install_qconfigs() { |
661 | install_qconfigs() { |
| 591 | local x |
662 | local x |
| 592 | if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} ]]; then |
663 | if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} ]]; then |
| 593 | for x in QCONFIG_ADD QCONFIG_REMOVE; do |
664 | for x in QCONFIG_ADD QCONFIG_REMOVE; do |
| 594 | [[ -n ${!x} ]] && echo ${x}=${!x} >> "${T}"/${PN}-qconfig.pri |
665 | [[ -n ${!x} ]] && echo ${x}=${!x} >> "${T}"/${PN}-qconfig.pri |
| … | |
… | |
| 605 | doins "${T}"/gentoo-${PN}-qconfig.h || die "installing ${PN}-qconfig.h failed" |
676 | doins "${T}"/gentoo-${PN}-qconfig.h || die "installing ${PN}-qconfig.h failed" |
| 606 | fi |
677 | fi |
| 607 | } |
678 | } |
| 608 | |
679 | |
| 609 | # @FUNCTION: generate_qconfigs |
680 | # @FUNCTION: generate_qconfigs |
|
|
681 | # @INTERNAL |
| 610 | # @DESCRIPTION: |
682 | # @DESCRIPTION: |
| 611 | # Generates gentoo-specific configurations |
683 | # Generates gentoo-specific qconfig.{h,pri}. |
| 612 | generate_qconfigs() { |
684 | generate_qconfigs() { |
| 613 | if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} || -n ${QCONFIG_DEFINE} || ${CATEGORY}/${PN} == x11-libs/qt-core ]]; then |
685 | if [[ -n ${QCONFIG_ADD} || -n ${QCONFIG_REMOVE} || -n ${QCONFIG_DEFINE} || ${PN} == qt-core ]]; then |
| 614 | local x qconfig_add qconfig_remove qconfig_new |
686 | local x qconfig_add qconfig_remove qconfig_new |
| 615 | for x in "${ROOT}${QTDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do |
687 | for x in "${ROOT}${QTDATADIR}"/mkspecs/gentoo/*-qconfig.pri; do |
| 616 | [[ -f ${x} ]] || continue |
688 | [[ -f ${x} ]] || continue |
| 617 | qconfig_add+=" $(sed -n 's/^QCONFIG_ADD=//p' "${x}")" |
689 | qconfig_add+=" $(sed -n 's/^QCONFIG_ADD=//p' "${x}")" |
| 618 | qconfig_remove+=" $(sed -n 's/^QCONFIG_REMOVE=//p' "${x}")" |
690 | qconfig_remove+=" $(sed -n 's/^QCONFIG_REMOVE=//p' "${x}")" |
| … | |
… | |
| 665 | fi |
737 | fi |
| 666 | } |
738 | } |
| 667 | |
739 | |
| 668 | # @FUNCTION: qt4-build_pkg_postrm |
740 | # @FUNCTION: qt4-build_pkg_postrm |
| 669 | # @DESCRIPTION: |
741 | # @DESCRIPTION: |
| 670 | # Generate configurations when the package is completely removed |
742 | # Regenerate configuration when the package is completely removed. |
| 671 | qt4-build_pkg_postrm() { |
743 | qt4-build_pkg_postrm() { |
| 672 | generate_qconfigs |
744 | generate_qconfigs |
| 673 | } |
745 | } |
| 674 | |
746 | |
| 675 | # @FUNCTION: qt4-build_pkg_postinst |
747 | # @FUNCTION: qt4-build_pkg_postinst |
| 676 | # @DESCRIPTION: |
748 | # @DESCRIPTION: |
| 677 | # Generate configuration, plus throws a message about possible |
749 | # Regenerate configuration, plus throw a message about possible |
| 678 | # breakages and proposed solutions. |
750 | # breakages and proposed solutions. |
| 679 | qt4-build_pkg_postinst() { |
751 | qt4-build_pkg_postinst() { |
| 680 | generate_qconfigs |
752 | generate_qconfigs |
| 681 | } |
753 | } |
| 682 | |
754 | |
| 683 | # @FUNCTION: skip_qmake_build |
755 | # @FUNCTION: skip_qmake_build |
|
|
756 | # @INTERNAL |
| 684 | # @DESCRIPTION: |
757 | # @DESCRIPTION: |
| 685 | # Don't need to build qmake, as it's already installed from qt-core |
758 | # Patches configure to skip qmake compilation, as it's already installed by qt-core. |
| 686 | skip_qmake_build() { |
759 | skip_qmake_build() { |
| 687 | # Don't need to build qmake, as it's already installed from qt-core |
|
|
| 688 | sed -i -e "s:if true:if false:g" "${S}"/configure || die "sed failed" |
760 | sed -i -e "s:if true:if false:g" "${S}"/configure || die |
| 689 | } |
761 | } |
| 690 | |
762 | |
| 691 | # @FUNCTION: skip_project_generation |
763 | # @FUNCTION: skip_project_generation |
|
|
764 | # @INTERNAL |
| 692 | # @DESCRIPTION: |
765 | # @DESCRIPTION: |
| 693 | # Exit the script early by throwing in an exit before all of the .pro files are scanned |
766 | # Exit the script early by throwing in an exit before all of the .pro files are scanned. |
| 694 | skip_project_generation() { |
767 | skip_project_generation() { |
| 695 | # Exit the script early by throwing in an exit before all of the .pro files are scanned |
|
|
| 696 | sed -e "s:echo \"Finding:exit 0\n\necho \"Finding:g" \ |
768 | sed -i -e "s:echo \"Finding:exit 0\n\necho \"Finding:g" "${S}"/configure || die |
| 697 | -i "${S}"/configure || die "sed failed" |
|
|
| 698 | } |
769 | } |
| 699 | |
770 | |
| 700 | # @FUNCTION: symlink_binaries_to_buildtree |
771 | # @FUNCTION: symlink_binaries_to_buildtree |
|
|
772 | # @INTERNAL |
| 701 | # @DESCRIPTION: |
773 | # @DESCRIPTION: |
| 702 | # Symlink generated binaries to buildtree so they can be used during compilation |
774 | # Symlinks generated binaries to buildtree, so they can be used during compilation time. |
| 703 | # time |
|
|
| 704 | symlink_binaries_to_buildtree() { |
775 | symlink_binaries_to_buildtree() { |
| 705 | for bin in qmake moc uic rcc; do |
776 | for bin in qmake moc uic rcc; do |
| 706 | ln -s "${QTBINDIR}"/${bin} "${S}"/bin/ || die "symlinking ${bin} to ${S}/bin failed" |
777 | ln -s "${QTBINDIR}"/${bin} "${S}"/bin/ || die "symlinking ${bin} to ${S}/bin failed" |
| 707 | done |
778 | done |
| 708 | } |
779 | } |
| 709 | |
780 | |
| 710 | # @FUNCTION: fix_library_files |
781 | # @FUNCTION: fix_library_files |
|
|
782 | # @INTERNAL |
| 711 | # @DESCRIPTION: |
783 | # @DESCRIPTION: |
| 712 | # Fixes the pathes in *.la, *.prl, *.pc, as they are wrong due to sandbox and |
784 | # Fixes the paths in *.la, *.prl, *.pc, as they are wrong due to sandbox and |
| 713 | # moves the *.pc-files into the pkgconfig directory |
785 | # moves the *.pc files into the pkgconfig directory. |
| 714 | fix_library_files() { |
786 | fix_library_files() { |
|
|
787 | local libfile |
| 715 | for libfile in "${D}"/${QTLIBDIR}/{*.la,*.prl,pkgconfig/*.pc}; do |
788 | for libfile in "${D}"/${QTLIBDIR}/{*.la,*.prl,pkgconfig/*.pc}; do |
| 716 | if [[ -e ${libfile} ]]; then |
789 | if [[ -e ${libfile} ]]; then |
| 717 | sed -i -e "s:${S}/lib:${QTLIBDIR}:g" ${libfile} || die "sed on ${libfile} failed" |
790 | sed -i -e "s:${S}/lib:${QTLIBDIR}:g" ${libfile} || die "sed on ${libfile} failed" |
| 718 | fi |
791 | fi |
| 719 | done |
792 | done |
| 720 | |
793 | |
| 721 | # pkgconfig files refer to WORKDIR/bin as the moc and uic locations. Fix: |
794 | # pkgconfig files refer to WORKDIR/bin as the moc and uic locations |
| 722 | for libfile in "${D}"/${QTLIBDIR}/pkgconfig/*.pc; do |
795 | for libfile in "${D}"/${QTLIBDIR}/pkgconfig/*.pc; do |
| 723 | if [[ -e ${libfile} ]]; then |
796 | if [[ -e ${libfile} ]]; then |
| 724 | sed -i -e "s:${S}/bin:${QTBINDIR}:g" ${libfile} || die "sed failed" |
797 | sed -i -e "s:${S}/bin:${QTBINDIR}:g" ${libfile} || die "sed on ${libfile} failed" |
| 725 | |
798 | |
| 726 | # Move .pc files into the pkgconfig directory |
799 | # Move .pc files into the pkgconfig directory |
| 727 | dodir ${QTPCDIR#${EPREFIX}} |
800 | dodir ${QTPCDIR#${EPREFIX}} |
| 728 | mv ${libfile} "${D}"/${QTPCDIR}/ \ |
801 | mv ${libfile} "${D}"/${QTPCDIR}/ || die "moving ${libfile} to ${D}/${QTPCDIR}/ failed" |
| 729 | || die "moving ${libfile} to ${D}/${QTPCDIR}/ failed" |
|
|
| 730 | fi |
802 | fi |
| 731 | done |
803 | done |
| 732 | |
804 | |
| 733 | # Don't install an empty directory |
805 | # Don't install an empty directory |
| 734 | rmdir "${D}"/${QTLIBDIR}/pkgconfig |
806 | rmdir "${D}"/${QTLIBDIR}/pkgconfig |
| 735 | } |
807 | } |
| 736 | |
808 | |
| 737 | # @FUNCTION: qt_use |
809 | # @FUNCTION: qt_use |
| 738 | # @USAGE: < flag > [ feature ] [ enableval ] |
810 | # @USAGE: < flag > [ feature ] [ enableval ] |
| 739 | # @DESCRIPTION: |
811 | # @DESCRIPTION: |
| 740 | # This will echo "${enableval}-${feature}" if <flag> is enabled, or |
812 | # This will echo "-${enableval}-${feature}" if <flag> is enabled, or |
| 741 | # "-no-${feature} if the flag is disabled. If [feature] is not specified <flag> |
813 | # "-no-${feature}" if it's disabled. If [feature] is not specified, <flag> |
| 742 | # will be used for that. If [enableval] is not specified, it omits the |
814 | # will be used for that. If [enableval] is not specified, it omits the |
| 743 | # assignment-part |
815 | # "-${enableval}" part. |
| 744 | qt_use() { |
816 | qt_use() { |
| 745 | local flag=$1 |
817 | use "$1" && echo "${3:+-$3}-${2:-$1}" || echo "-no-${2:-$1}" |
| 746 | local feature=$1 |
|
|
| 747 | local enableval= |
|
|
| 748 | |
|
|
| 749 | [[ -n $2 ]] && feature=$2 |
|
|
| 750 | [[ -n $3 ]] && enableval=-$3 |
|
|
| 751 | |
|
|
| 752 | if use ${flag}; then |
|
|
| 753 | echo "${enableval}-${feature}" |
|
|
| 754 | else |
|
|
| 755 | echo "-no-${feature}" |
|
|
| 756 | fi |
|
|
| 757 | } |
818 | } |
| 758 | |
819 | |
| 759 | # @FUNCTION: qt_mkspecs_dir |
820 | # @FUNCTION: qt_mkspecs_dir |
| 760 | # @RETURN: the specs-directory w/o path |
821 | # @RETURN: the specs-directory w/o path |
| 761 | # @DESCRIPTION: |
822 | # @DESCRIPTION: |
| 762 | # Allows us to define which mkspecs dir we want to use. |
823 | # Allows us to define which mkspecs dir we want to use. |
| 763 | qt_mkspecs_dir() { |
824 | qt_mkspecs_dir() { |
| 764 | # Allows us to define which mkspecs dir we want to use. |
|
|
| 765 | local spec |
825 | local spec= |
| 766 | |
826 | |
| 767 | case ${CHOST} in |
827 | case "${CHOST}" in |
| 768 | *-freebsd*|*-dragonfly*) |
828 | *-freebsd*|*-dragonfly*) |
| 769 | spec=freebsd ;; |
829 | spec=freebsd ;; |
| 770 | *-openbsd*) |
830 | *-openbsd*) |
| 771 | spec=openbsd ;; |
831 | spec=openbsd ;; |
| 772 | *-netbsd*) |
832 | *-netbsd*) |
| … | |
… | |
| 783 | *-solaris*) |
843 | *-solaris*) |
| 784 | spec=solaris ;; |
844 | spec=solaris ;; |
| 785 | *-linux-*|*-linux) |
845 | *-linux-*|*-linux) |
| 786 | spec=linux ;; |
846 | spec=linux ;; |
| 787 | *) |
847 | *) |
| 788 | die "Unknown CHOST, no platform chosen" |
848 | die "${FUNCNAME}(): Unknown CHOST '${CHOST}'" ;; |
| 789 | esac |
849 | esac |
| 790 | |
850 | |
| 791 | CXX=$(tc-getCXX) |
851 | case "$(tc-getCXX)" in |
| 792 | if [[ ${CXX} == *g++* ]]; then |
852 | *g++*) |
| 793 | spec+=-g++ |
853 | spec+=-g++ ;; |
| 794 | elif [[ ${CXX} == *icpc* ]]; then |
854 | *icpc*) |
| 795 | spec+=-icc |
855 | spec+=-icc ;; |
| 796 | else |
856 | *) |
| 797 | die "Unknown compiler '${CXX}'" |
857 | die "${FUNCNAME}(): Unknown compiler '$(tc-getCXX)'" ;; |
| 798 | fi |
858 | esac |
| 799 | if [[ -n ${LIBDIR/lib} ]]; then |
|
|
| 800 | spec+=-${LIBDIR/lib} |
|
|
| 801 | fi |
|
|
| 802 | |
859 | |
| 803 | # Add -64 for 64bit profiles |
860 | # Add -64 for 64bit profiles |
| 804 | if use x64-freebsd || |
861 | if use x64-freebsd || |
| 805 | use amd64-linux || |
862 | use amd64-linux || |
| 806 | use x64-macos || |
863 | use x64-macos || |
| … | |
… | |
| 811 | fi |
868 | fi |
| 812 | |
869 | |
| 813 | echo "${spec}" |
870 | echo "${spec}" |
| 814 | } |
871 | } |
| 815 | |
872 | |
| 816 | # @FUNCTION: qt_assistant_cleanup |
|
|
| 817 | # @RETURN: nothing |
|
|
| 818 | # @DESCRIPTION: |
|
|
| 819 | # Tries to clean up tools.pro for qt-assistant ebuilds. |
|
|
| 820 | # Meant to be called in src_prepare(). |
|
|
| 821 | # Since Qt 4.7.4 this function is a no-op. |
|
|
| 822 | qt_assistant_cleanup() { |
|
|
| 823 | # apply patching to qt-assistant ebuilds only |
|
|
| 824 | [[ ${PN} != "qt-assistant" ]] && return |
|
|
| 825 | |
|
|
| 826 | # no longer needed for 4.7.4 and later |
|
|
| 827 | version_is_at_least "4.7.4" && return |
|
|
| 828 | |
|
|
| 829 | # different versions (and branches...) may need different handling, |
|
|
| 830 | # add a case if you need special handling |
|
|
| 831 | case "${MY_PV_EXTRA}" in |
|
|
| 832 | *kde-qt*) |
|
|
| 833 | sed -e "/^[ \t]*porting/,/^[ \t]*win32.*activeqt$/d" \ |
|
|
| 834 | -e "/mac/,/^embedded.*makeqpf$/d" \ |
|
|
| 835 | -i tools/tools.pro || die "patching tools.pro failed" |
|
|
| 836 | ;; |
|
|
| 837 | *) |
|
|
| 838 | sed -e "/^[ \t]*porting/,/^[ \t]*win32.*activeqt$/d" \ |
|
|
| 839 | -e "/mac/,/^embedded.*makeqpf$/d" \ |
|
|
| 840 | -e "s/^\([ \t]*pixeltool\) /\1 qdoc3 /" \ |
|
|
| 841 | -i tools/tools.pro || die "patching tools.pro failed" |
|
|
| 842 | ;; |
|
|
| 843 | esac |
|
|
| 844 | } |
|
|
| 845 | |
|
|
| 846 | # @FUNCTION: qt_nolibx11 |
873 | # @FUNCTION: qt_nolibx11 |
| 847 | # @RETURN: nothing |
874 | # @INTERNAL |
| 848 | # @DESCRIPTION: |
875 | # @DESCRIPTION: |
| 849 | # Ignore X11 tests for packages that don't need X libraries installed |
876 | # Ignore X11 tests for packages that don't need X libraries installed. |
| 850 | qt_nolibx11() { |
877 | qt_nolibx11() { |
| 851 | einfo "Removing X11 check to allow X-less compilation" |
|
|
| 852 | sed -i "/unixtests\/compile.test.*config.tests\/x11\/xlib/,/fi$/d" "${S}"/configure || |
878 | sed -i "/unixtests\/compile.test.*config.tests\/x11\/xlib/,/fi$/d" "${S}"/configure || |
| 853 | die "x11 check sed failed" |
879 | die "x11 check sed failed" |
| 854 | } |
880 | } |
| 855 | |
881 | |
| 856 | EXPORT_FUNCTIONS pkg_setup src_unpack src_prepare src_configure src_compile src_install src_test pkg_postrm pkg_postinst |
882 | EXPORT_FUNCTIONS pkg_setup src_unpack src_prepare src_configure src_compile src_install src_test pkg_postrm pkg_postinst |
Parent Directory
| 
Revision Log
| 
Patch