--- xml/htdocs/doc/en/handbook/hb-install-config.xml	2011/08/14 10:29:40	1.106
+++ xml/htdocs/doc/en/handbook/hb-install-config.xml	2011/09/11 08:53:34	1.107
@@ -4,7 +4,7 @@
 <!-- The content of this document is licensed under the CC-BY-SA license -->
 <!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
 
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-config.xml,v 1.106 2011/08/14 10:29:40 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-config.xml,v 1.107 2011/09/11 08:53:34 swift Exp $ -->
 
 <sections>
 
@@ -14,8 +14,8 @@
 proceed.
 </abstract>
 
-<version>13</version>
-<date>2011-08-13</date>
+<version>14</version>
+<date>2011-09-11</date>
 
 <section>
 <title>Filesystem Information</title>
@@ -488,21 +488,21 @@
 </pre>
 
 <p>
-If your hardware clock is not using UTC, you need to add <c>CLOCK="local"</c>
+If your hardware clock is not using UTC, you need to add <c>clock="local"</c>
 to the file. Otherwise you will notice some clock skew.
 </p>
 
 <p>
-You should define the timezone that you previously copied to
-<path>/etc/localtime</path> so that further upgrades of the
-<c>sys-libs/timezone-data</c> package can update <path>/etc/localtime</path>
-automatically. For instance, if you used the GMT timezone, you would add
-<c>TIMEZONE="GMT"</c>
+When you're finished configuring <path>/etc/conf.d/hwclock</path>, save and
+exit. 
 </p>
 
 <p>
-When you're finished configuring <path>/etc/conf.d/hwclock</path>, save and
-exit. 
+You should define the timezone that you previously copied to
+<path>/etc/localtime</path> in the <path>/etc/timezone</path> file so that
+further upgrades of the <c>sys-libs/timezone-data</c> package can update
+<path>/etc/localtime</path> automatically. For instance, if you used the GMT
+timezone, you would write <c>GMT</c> in the <path>/etc/timezone</path> file.
 </p>
 
 <p test="not(func:keyval('arch')='PPC64')">