--- xml/htdocs/doc/en/handbook/hb-install-config.xml	2005/05/23 18:13:34	1.61
+++ xml/htdocs/doc/en/handbook/hb-install-config.xml	2005/06/09 07:16:39	1.62
@@ -4,12 +4,12 @@
 <!-- The content of this document is licensed under the CC-BY-SA license -->
 <!-- See http://creativecommons.org/licenses/by-sa/1.0 -->
 
-<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-config.xml,v 1.61 2005/05/23 18:13:34 swift Exp $ -->
+<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-config.xml,v 1.62 2005/06/09 07:16:39 swift Exp $ -->
 
 <sections>
 
-<version>2.3</version>
-<date>2005-05-23</date>
+<version>2.4</version>
+<date>2005-06-09</date>
 
 <section>
 <title>Filesystem Information</title>
@@ -237,61 +237,6 @@
 # <i>nano -w /etc/conf.d/net</i>
 </pre>
 
-<!-- Old baselayout - current stable -->
-
-<p>
-The first variable you'll find is <c>iface_eth0</c>. It uses the following
-syntax:
-</p>
-
-<pre caption="iface_eth0 syntaxis">
-iface_eth0="<i>&lt;your ip address&gt;</i> broadcast <i>&lt;your broadcast address&gt;</i> netmask <i>&lt;your netmask&gt;</i>"
-</pre>
-
-<p>
-If you use DHCP (automatic IP retrieval), you should just set <c>iface_eth0</c>
-to <c>dhcp</c>. If you use rp-pppoe (e.g. for ADSL), set it to <c>up</c>. 
-If you need to set up your network manually and you're 
-not familiar with all the above terms, please read the section on <uri
-link="?part=1&amp;chap=3#network_term">Understanding Network
-Terminology</uri> if you haven't done so already.
-</p>
-
-<p>
-So let us give three examples; the first one uses DHCP, the second one a static 
-IP (192.168.0.2) with netmask 255.255.255.0, broadcast 192.168.0.255 and 
-gateway 192.168.0.1 while the third one just activates the interface for
-rp-pppoe usage:
-</p>
-
-<pre caption="Examples for /etc/conf.d/net">
-<comment>(For DHCP)</comment>
-iface_eth0="dhcp"
-<comment># Some network admins require that you use the</comment>
-<comment># hostname and domainname provided by the DHCP server.</comment>
-<comment># In that case, add the following to let dhcpcd use them.</comment>
-<comment># That will override your own hostname and domainname definitions.</comment>
-dhcpcd_eth0="-HD"
-<comment># If you intend on using NTP to keep your machine clock synchronized, use</comment>
-<comment># the -N option to prevent dhcpcd from overwriting your /etc/ntp.conf file</comment>
-dhcpcd_eth0="-N"
-
-<comment>(For static IP)</comment>
-iface_eth0="192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0"
-gateway="eth0/192.168.0.1"
-
-<comment>(For rp-pppoe)</comment>
-iface_eth0="up"
-</pre>
-
-<p>
-If you have several network interfaces, create extra <c>iface_eth</c> variables,
-like <c>iface_eth1</c>, <c>iface_eth2</c> etc. The <c>gateway</c> variable
-shouldn't be reproduced as you can only set one gateway per computer.
-</p>
-
-<!-- New baselayout - current testing
-
 <p>
 The first variable you'll find is called <c>config_eth0</c>. As you can probably
 imagine, this variable configured the eth0 network interface. If the interface
@@ -317,8 +262,6 @@
 <c>config_eth1</c>, <c>config_eth2</c>, etc.
 </p>
 
--->
-
 <p>
 Now save the configuration and exit to continue.
 </p>