/[gentoo]/xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml
Gentoo

Diff of /xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.32 Revision 1.65
1<?xml version='1.0' encoding='UTF-8'?> 1<?xml version='1.0' encoding='UTF-8'?>
2<!DOCTYPE sections SYSTEM "/dtd/book.dtd"> 2<!DOCTYPE sections SYSTEM "/dtd/book.dtd">
3 3
4<!-- The content of this document is licensed under the CC-BY-SA license --> 4<!-- The content of this document is licensed under the CC-BY-SA license -->
5<!-- See http://creativecommons.org/licenses/by-sa/1.0 --> 5<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
6 6
7<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml,v 1.32 2004/11/09 13:01:52 swift Exp $ --> 7<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml,v 1.65 2011/05/16 15:15:45 josejx Exp $ -->
8 8
9<sections> 9<sections>
10 10
11<abstract>
12You can install Gentoo in many ways. This chapter explains how to install
13Gentoo using the minimal Installation CD.
14</abstract>
15
11<version>1.31</version> 16<version>10.1</version>
12<date>November 4, 2004</date> 17<date>2011-05-16</date>
13 18
14<section> 19<section>
15<title>Hardware Requirements</title> 20<title>Hardware Requirements</title>
16<subsection> 21<subsection>
17<title>Introduction</title> 22<title>Introduction</title>
18<body> 23<body>
19 24
20<p> 25<p>
21Before we start, we first list what hardware requirements you need to 26Before we start, we first list what hardware requirements you need to
22successfully install Gentoo on your box. This of course depends on your 27successfully install Gentoo on your box.
23architecture.
24</p> 28</p>
25 29
26</body> 30</body>
27</subsection>
28<subsection> 31</subsection>
29<title>The PPC Architecture</title> 32<subsection>
33<title>Hardware Requirements</title>
30<body> 34<body>
31 35
32<p> 36<table>
33Check the following requirements before you 37<tr>
34continue with the Gentoo installation: 38 <th>Apple NewWorld Machines</th>
39 <ti>
40 Power/PowerPC microprocessors (G3, G4, G5) such as iMac, eMac, iBook
41 PowerBook, Xserver, PowerMac
42 </ti>
43</tr>
44<tr>
45 <th>Apple OldWorld machines</th>
46 <ti>
47 Apple Machines with an Open Firmware revision less than 3, such as the Beige
48 G3s, PCI PowerMacs and PCI PowerBooks. PCI-based Apple Clones should also
49 be supported.
50 </ti>
51</tr>
52<tr>
53 <th>Genesi</th>
54 <ti>
55 Pegasos I/II, Open Desktop Workstation, Efika
56 </ti>
57</tr>
58<tr>
59 <th>IBM</th>
60 <ti>
61 RS/6000, iSeries, pSeries
62 </ti>
63</tr>
64<tr>
65 <th>Memory</th>
66 <ti>At least 64 MB</ti>
67</tr>
68<tr>
69 <th>Diskspace</th>
70 <ti>1.5 GB (excluding swap space)</ti>
71</tr>
72<tr>
73 <th>Swap space</th>
74 <ti>At least 256 MB</ti>
75</tr>
76</table>
77
35</p> 78<p>
36
37<ul>
38<li>
39 You need at least 2 GB of free disk space
40</li>
41<li>
42 If you do not use prebuilt packages, you need at least 300 MB of memory (RAM +
43 swap), if you do use prebuilt packages you need at least 64 MB of memory to boot the system.
44</li>
45<li>
46 For the <e>PowerPC architecture</e>, you can install Gentoo/PPC on NewWorld machines
47 having a Power or PowerPC microprocessor, including but not limited to G3, G4
48 or G5 powered Apple computers such as the iMac, the eMac, the iBook, the PowerBook,
49 Xserve, PowerMac, and bPlan's Pegasos II. We also provide limited
50 support for OldWorld systems, IBM (RS/6000, iSeries, pSeries, ...) and Amiga
51 systems. Be sure to read up on the <uri link="/doc/en/gentoo-ppc-faq.xml">Gentoo 79Be sure to read the <uri link="/doc/en/gentoo-ppc-faq.xml">Gentoo PPC FAQ</uri>
52 PPC FAQ</uri> before you begin. 80for help with some common installation related issues or if you're unsure as to
53</li> 81just what's in that PowerPC machine you've got sitting on your desk right now.
54</ul> 82</p>
55 83
56</body> 84</body>
57</subsection> 85</subsection>
58</section> 86</section>
87
88<!-- START -->
59<section> 89<section>
60<title>Make your Choice</title> 90<title>The Gentoo Installation CDs</title>
61<subsection> 91<subsection>
62<title>Introduction</title> 92<title>Introduction</title>
63<body> 93<body>
64 94
65<p> 95<p>
66Still interested in trying out Gentoo? Well, then it is now time to
67choose the installation medium you want to use. Yes, you have the
68choice, no, they are not all equal, and yes, the result is always the same: a
69Gentoo base system.
70</p>
71
72<p>
73The installation media we will describe are:
74</p>
75
76<ul>
77<li>Gentoo's Minimal LiveCD</li>
78<li>Gentoo's Universal LiveCD</li>
79</ul>
80
81<p>
82Every single media has its advantages and disadvantages. We will list
83the pros and cons of every medium so you have all the information to
84make a justified decision. But before we continue, let's explain our
85three-stage installation.
86</p>
87
88</body>
89</subsection>
90<subsection>
91<title>The Three Stages</title>
92<body>
93
94<p>
95Gentoo Linux can be installed using one of three <e>stage</e> tarball files.
96The one you choose depends on how much of the system you want to compile
97yourself. The <e>stage1</e> tarball is used when you want to bootstrap and
98build the entire system from scratch. The <e>stage2</e> tarball is used for
99building the entire system from a bootstrapped &quot;semi-compiled&quot; state.
100The <e>stage3</e> tarball already contains a basic Gentoo Linux system that has
101been built for you. As we will explain later, you can also install
102Gentoo without compiling anything (except your kernel and some optional
103packages). If you want this, you have to use a <e>stage3</e> tarball.
104</p>
105
106<p>
107Now what stage do you have to choose?
108</p>
109
110<p>
111Starting from a <e>stage1</e> allows you to have total control over the
112optimization settings and optional build-time functionality that is
113initially enabled on your system. This makes <e>stage1</e> installs good for
114power users who know what they are doing. It is also a great
115installation method for those who would like to know more about the
116inner workings of Gentoo Linux.
117</p>
118
119<p>
120A <e>stage1</e> installation can only be performed when you have a working
121Internet connection.
122</p>
123
124<table>
125<tr>
126 <th>Stage1</th>
127 <th>Pros and Cons</th>
128</tr>
129<tr>
130 <th>+</th>
131 <ti>
132 Allows you to have total control over the optimization settings and optional
133 build-time functionality that is initially enabled on your system
134 </ti>
135</tr>
136<tr>
137 <th>+</th>
138 <ti>Suitable for powerusers that know what they are doing</ti>
139</tr>
140<tr>
141 <th>+</th>
142 <ti>Allows you to learn more about the inner workings of Gentoo</ti>
143</tr>
144<tr>
145 <th>-</th>
146 <ti>Takes a long time to finish the installation</ti>
147</tr>
148<tr>
149 <th>-</th>
150 <ti>
151 If you don't intend to tweak the settings, it is probably a waste of time
152 </ti>
153</tr>
154<tr>
155 <th>-</th>
156 <ti>
157 Not suitable for networkless installations
158 </ti>
159</tr>
160</table>
161
162<p>
163<e>Stage2</e> installs allow you to skip the bootstrap process and doing this
164is fine if you are happy with the optimization settings that we chose
165for your particular <e>stage2</e> tarball.
166</p>
167
168<p>
169A <e>stage2</e> installation can only be performed when you have a working
170Internet connection.
171</p>
172
173<table>
174<tr>
175 <th>Stage2</th>
176 <th>Pros and Cons</th>
177</tr>
178<tr>
179 <th>+</th>
180 <ti>You don't need to bootstrap</ti>
181</tr>
182<tr>
183 <th>+</th>
184 <ti>Faster than starting with stage1</ti>
185</tr>
186<tr>
187 <th>+</th>
188 <ti>You can still tweak your settings</ti>
189</tr>
190<tr>
191 <th>-</th>
192 <ti>You cannot tweak as much as with a stage1</ti>
193</tr>
194<tr>
195 <th>-</th>
196 <ti>It's not the fastest way to install Gentoo</ti>
197</tr>
198<tr>
199 <th>-</th>
200 <ti>You have to accept the optimizations we chose for the bootstrap</ti>
201</tr>
202<tr>
203 <th>-</th>
204 <ti>
205 Not suitable for networkless installations
206 </ti>
207</tr>
208</table>
209
210<p>
211Choosing to go with a <e>stage3</e> allows for the fastest install of Gentoo
212Linux, but also means that your base system will have the optimization
213settings that we chose for you (which to be honest, are good settings
214and were carefully chosen to enhance performance while maintaining
215stability). <e>stage3</e> is also required if you want to install Gentoo using
216prebuilt packages or without a network connection.
217</p>
218
219<table>
220<tr>
221 <th>Stage3</th>
222 <th>Pros and Cons</th>
223</tr>
224<tr>
225 <th>+</th>
226 <ti>Fastest way to get a Gentoo base system</ti>
227</tr>
228<tr>
229 <th>+</th>
230 <ti>Suitable for networkless installations</ti>
231</tr>
232<tr>
233 <th>-</th>
234 <ti>You cannot tweak the base system - it's built already</ti>
235</tr>
236<tr>
237 <th>-</th>
238 <ti>You cannot brag about having used stage1 or stage2</ti>
239</tr>
240</table>
241
242<p>
243Write down (or remember) what stage you want to use. You need this later when
244you decide what LiveCD (or other installation medium) you want to use. You might
245be interested to know that, if you decide to use different optimization settings
246after having installed Gentoo, you will be able to recompile your entire system
247with the new optimization settings.
248</p>
249
250<p>
251Now take a look at the available installation media.
252</p>
253
254</body>
255</subsection>
256<subsection>
257<title>Gentoo LiveCDs</title>
258<body>
259
260<note>
261The Gentoo/PPC 2004.2 release is not official, so you will not find them on the
262mirrors. All of our self-organised mirrors are currently down. The only chance
263you can get the LiveCDs is via <uri
264link="http://torrents.gentoo.org/torrents/">BitTorrent</uri>.
265</note>
266
267<note>
268It is known that the Pegasos II will not boot the 2004.2 LiveCD. Please use the
2692004.1 LiveCD.
270</note>
271
272<p>
273The <e>Gentoo LiveCDs</e> are bootable CDs which contain a 96The <e>Gentoo Installation CDs</e> are bootable CDs which contain a
274self-sustained Gentoo environment. They allow you to boot Linux from the CD. 97self-sustained Gentoo environment. They allow you to boot Linux from the CD.
275During the boot process your hardware is detected and the appropriate drivers 98During the boot process your hardware is detected and the appropriate drivers
276are loaded. They are maintained by Gentoo developers. 99are loaded. They are maintained by Gentoo developers.
277</p> 100</p>
278 101
279<p> 102<p>
280All LiveCDs allow you to boot, set up networking, initialize your 103All Installation CDs allow you to boot, set up networking, initialize your
281partitions and start installing Gentoo from the Internet. However, some 104partitions and start installing Gentoo from the Internet.
282LiveCDs also contain all necessary source code so you are able to install
283Gentoo without a working network configuration.
284</p>
285
286<p> 105</p>
287Now what do these LiveCDs contain? 106
107<!--
108<impo>
109If you wish to install Gentoo without a working Internet connection, or would
110like to use one of the provided installers, please use the installation
111instructions described in the <uri link="2008.0/">Gentoo 2008.0
112Handbooks</uri>.
113</impo>
114-->
115<!--
288</p> 116<p>
117The Installation CDs that we currently provide are:
118</p>
289 119
120<ul>
121 <li>
122 The Gentoo <e>Minimal</e> Installation CD, a small, no-nonsense, bootable
123 CD which sole purpose is to boot the system, prepare the networking and
124 continue with the Gentoo installation.
125 </li>
126 <li>
127 The Universal Installation CD contains everything you need to install
128 Gentoo. It provides stage3 files for common architectures, source code
129 for the extra applications you need to choose from and, of course, the
130 installation instructions for your architecture.
131 </li>
132</ul>
133
134<p>
135Gentoo also provides a Package CD. This is not an Installation CD but an
136additional resource that you can exploit during the installation of your Gentoo
137system. It contains prebuilt packages (also known as the GRP set) that allow
138you to easily and quickly install additional applications (such as
139OpenOffice.org, KDE, GNOME, ...) immediately after the Gentoo installation and
140right before you update your Portage tree.
141</p>
142
143<p>
144The use of the Package CD is covered later in this document.
145</p>
146-->
290</body> 147</body>
291</subsection>
292<subsection> 148</subsection>
149<subsection>
293<title>Gentoo's Minimal LiveCD</title> 150<title>Gentoo Minimal Installation CD</title>
294<body> 151<body>
295 152
296<p>
297This is a small, no-nonsense, bootable CD which sole purpose is to boot the
298system, prepare the networking and continue with the Gentoo installation. It
299does not contain any stages (or, in some cases, a single stage1 file),
300source code or precompiled packages. For example the ppc variant of this
301LiveCD can be found in the <path>livecd</path> subdirectory and is called
302<c>install-ppc-minimal-2004.2.iso</c>.
303</p> 153<p>
304 154The Minimal Installation CD is called <c><keyval id="min-cd-name"/></c> and
155takes up only <keyval id="min-cd-size"/> MB of diskspace. You can use this
156Installation CD to install Gentoo, but <e>only</e> with a working Internet
157connection.
158</p>
159<!--
305<table> 160<table>
306<tr> 161<tr>
307 <th>Minimal LiveCD</th> 162 <th>Minimal Installation CD</th>
308 <th>Pros and Cons</th> 163 <th>Pros and Cons</th>
309</tr> 164</tr>
310<tr> 165<tr>
311 <th>+</th> 166 <th>+</th>
312 <ti>Smallest download</ti> 167 <ti>Smallest download</ti>
313</tr> 168</tr>
314<tr> 169<tr>
315 <th>+</th>
316 <ti>Suitable for a complete architecture</ti>
317</tr>
318<tr>
319 <th>+</th>
320 <ti>
321 You can do a stage1, stage2 or stage3 by getting the stage tarball off the
322 net
323 </ti>
324</tr>
325<tr>
326 <th>-</th> 170 <th>-</th>
327 <ti> 171 <ti>
328 Contains no stages, no Portage snapshot, no GRP packages and therefore not 172 Contains no stage3 tarball, no Portage snapshot, no prebuilt packages and
329 suitable for networkless installation 173 is therefore not suitable for networkless installation
330 </ti> 174 </ti>
331</tr> 175</tr>
332</table> 176</table>
333 177-->
334</body> 178</body>
335</subsection>
336<subsection> 179</subsection>
337<title>Gentoo's Universal LiveCD</title> 180<subsection>
181<title>The Stage3 Tarball</title>
338<body> 182<body>
339 183
340<p>
341Gentoo's Universal LiveCD is a bootable CD suitable to install Gentoo without
342networking. It contains a stage1 and several stage3 tarballs (optimized for the
343individual subarchitectures). For example the ppc variant of this CD is called
344<c>install-ppc-universal-2004.2.iso</c> and can be found in the
345<path>livecd</path> subdirectory.
346</p> 184<p>
347 185A stage3 tarball is an archive containing a minimal Gentoo environment,
186suitable to continue the Gentoo installation using the instructions in this
187manual. Previously, the Gentoo Handbook described the installation using one of
188three stage tarballs. While Gentoo still offers stage1 and stage2 tarballs, the
189official installation method uses the stage3 tarball. If you are interested in
190performing a Gentoo installation using a stage1 or stage2 tarball, please read
191the Gentoo FAQ on <uri link="/doc/en/faq.xml#stage12">How do I Install Gentoo
192Using a Stage1 or Stage2 Tarball?</uri>
348<p> 193</p>
349If you take a closer look on our mirrors, you will see 194
350that we provide <e>Gentoo Package CDs</e>. This CD (which isn't
351bootable) only contains precompiled packages and can be used to install software
352after a succesfull Gentoo Installation. To install Gentoo, you only
353need the Universal LiveCD, but if you want OpenOffice.org, Mozilla, KDE, GNOME
354etc. without having to compile every single one of them, you need the Packages
355CD too. For example the G4 (a subarchitecture of ppc) Packages CD is
356called <c>packages-g4-2004.2.iso</c> and can be found in the appropriate
357subdirectory (<path>g4/</path>).
358</p> 195<p>
359 196Stage3 tarballs can be downloaded from <path><keyval
197id="release-dir"/>current-stage3/</path> on any of the <uri
198link="/main/en/mirrors.xml">Official Gentoo Mirrors</uri> and are not provided
199on the LiveCD.
360<p> 200</p>
361You only need the Packages CD if you want to perform a stage3 with GRP
362installation.
363</p>
364
365<table>
366<tr>
367 <th>Universal LiveCD with Packages CD</th>
368 <th>Pros and Cons</th>
369</tr>
370<tr>
371 <th>+</th>
372 <ti>Packages CD is optimized to your architecture and subarchitecture</ti>
373</tr>
374<tr>
375 <th>+</th>
376 <ti>
377 Packages CD provides precompiled packages for fast Gentoo installations
378 </ti>
379</tr>
380<tr>
381 <th>+</th>
382 <ti>
383 Contains everything you need. You can even install without a network
384 connection.
385 </ti>
386</tr>
387<tr>
388 <th>-</th>
389 <ti>Huge download</ti>
390</tr>
391</table>
392 201
393</body> 202</body>
394</subsection> 203</subsection>
395</section> 204</section>
205
206
207<!-- STOP -->
396<section> 208<section>
397<title>Download, Burn and Boot a Gentoo LiveCD</title> 209<title>Download, Burn and Boot a Gentoo Installation CD</title>
398<subsection> 210<subsection>
399<title>Downloading and Burning the LiveCDs</title> 211<title>Downloading and Burning the Installation CDs</title>
400<body> 212<body>
401 213
402<p>
403You have chosen to use a Gentoo LiveCD (if not, then you are reading the
404wrong section). We'll first start by downloading and burning the chosen
405LiveCD. We previously discussed the several available LiveCDs, but where can you
406find them?
407</p> 214<p>
408 215You have chosen to use a Gentoo Installation CD. We'll first start by
216downloading and burning the chosen Installation CD. We previously discussed
217the several available Installation CDs, but where can you find them?
409<p> 218</p>
410Visit one of our <uri 219
411link="/main/en/mirrors.xml">mirrors</uri> and go to
412<path>releases/ppc/2004.2/livecd</path>, which is
413the path where the LiveCD(s) of your choice are located. Inside that
414directory you'll find so-called ISO-files. Those are full CD images
415which you can write on a CD-R.
416</p> 220<p>
417 221You can download any of the Installation CDs from one of our <uri
222link="/main/en/mirrors.xml">mirrors</uri>. The Installation CDs are located in
223the <path><keyval id="release-dir"/>current-iso/</path> directory.
418<p> 224</p>
225
226<p>
227Inside that directory you'll find ISO files. Those are full CD images which you
228can write on a CD-R.
229</p>
230
231<p>
419In case you wonder if your downloaded file is corrupted or not, you can 232In case you wonder if your downloaded file is corrupted or not, you can check
420check its MD5 checksum and compare it with the MD5 checksum we provide (such as 233its MD5 checksum and compare it with the MD5 checksum we provide (such as
421<path>install-ppc-minimal-2004.2.iso.md5</path>). You can check the MD5 checksum 234<path><keyval id="min-cd-name"/>.DIGESTS</path>). You can check the MD5
422with the <c>md5sum</c> tool under Linux/Unix or <uri 235checksum with the <c>md5sum</c> tool under Linux/Unix or <uri
423link="http://www.etree.org/md5com.html">md5sum</uri> for Windows. 236link="http://www.etree.org/md5com.html">md5sum</uri> for Windows.
424</p> 237</p>
425 238
426<p> 239<p>
427As long as Mac OS X does not support <c>md5sum</c> you have to use the md5 240Another way to check the validity of the downloaded file is to use GnuPG to
428capability of <c>openssl</c>. Therefore type in Terminal.app: 241verify the cryptographic signature that we provide (the file ending with
429</p> 242<path>.asc</path>). Download the signature file and obtain the public key:
430
431<pre caption="md5sum with the help of openssl">
432$ <i>openssl md5 /path/to/iso</i>
433<comment>This could take some time depending of the size of the ISO and your CPU</comment>
434</pre>
435
436<p> 243</p>
437Now compare this output with the appropriate file found on the server where you 244
438downloaded the ISO (the file will end with .md5). If it is the same, the ISO 245<pre caption="Obtaining the public key">
439image downloaded correctly. Be sure you have not mounted it (e.g. with Disk 246$ <i>gpg --keyserver subkeys.pgp.net --recv-keys 2D182910</i>
440Copy) yet! 247</pre>
248
441</p> 249<p>
442 250Now verify the signature:
443<p> 251</p>
444More information are available in our <uri 252
445link="/doc/en/gentoo-ppc-faq.xml">PPC FAQ.</uri> 253<pre caption="Verify the files">
254<comment>(Verify the cryptographic signature)</comment>
255$ <i>gpg --verify &lt;downloaded iso.DIGESTS.asc&gt;</i>
256<comment>(Verify the checksum)</comment>
257$ <i>sha1sum -c &lt;downloaded iso.DIGESTS.asc&gt;</i>
446</p> 258</pre>
447 259
448<p> 260<p>
449To burn the downloaded ISO(s), you have to select raw-burning. How you 261To burn the downloaded ISO(s), you have to select raw-burning. How you
450do this is highly program-dependent. We will discuss <c>cdrecord</c>, 262do this is highly program-dependent. We will discuss <c>cdrecord</c> and
451<c>k3b</c> and the MacOS burning possibilities here; more information can 263<c>K3B</c> here; more information can be found in our <uri
452be found in our <uri link="/doc/en/faq.xml#isoburning">Gentoo FAQ</uri> and 264link="/doc/en/faq.xml#isoburning">Gentoo FAQ</uri>.
453the <uri link="/doc/en/gentoo-ppc-faq.xml">PPC FAQ</uri>.
454</p> 265</p>
455 266
456<ul> 267<ul>
457 <li> 268 <li>
458 With cdrecord, you simply type <c>cdrecord dev=/dev/hdc</c> (replace 269 With cdrecord, you simply type <c>cdrecord dev=/dev/hdc &lt;downloaded iso
459 <path>/dev/hdc</path> with your CD-RW drive's device path) followed 270 file&gt;</c> (replace <path>/dev/hdc</path> with your CD-RW drive's device
460 by the path to the ISO file :) 271 path).
461 </li> 272 </li>
462 <li> 273 <li>
463 With k3b, select <c>Tools</c> &gt; <c>CD</c> &gt; <c>Burn Image</c>. Then 274 With K3B, select <c>Tools</c> &gt; <c>Burn CD Image</c>. Then you can locate
464 you can locate your ISO file within the 'Image to Burn' area. Finally click 275 your ISO file within the 'Image to Burn' area. Finally click <c>Start</c>.
465 <c>Start</c>.
466 </li>
467 <li>
468 With Mac OS X Panther, launch <c>Disk Utility</c> from
469 <path>Applications/Utilities</path>, select <c>Open</c> from the
470 <c>Images</c> menu, select the mounted disk image in the main window and
471 select <c>Burn</c> in the <c>Images</c> menu.
472 </li>
473 <li>
474 With Mac OS X Jaguar, launch <c>Disk Copy</c> from
475 <path>Applications/Utilities</path>, select <c>Burn Image</c> from the
476 <c>File</c> menu, select the ISO and click the <c>Burn</c> button.
477 </li> 276 </li>
478</ul> 277</ul>
479 278
480</body> 279</body>
481</subsection> 280</subsection>
482</section>
483<section> 281<subsection>
484<title>Booting the PPC LiveCD(s)</title> 282<title>Default: Booting the Installation CD with Yaboot</title>
485<subsection>
486<title>Default: Apple/IBM</title>
487<body> 283<body>
488 284
489<p>
490On NewWorld machines place the LiveCD in the CD-ROM and reboot the system. When
491the system-start-bell sounds, simply hold down the 'C' until the CD loads.
492</p> 285<p>
493 286On NewWorld machines place the Installation CD in the CD-ROM and reboot the
287system. When the system-start-bell sounds, simply hold down the 'C' until the
288CD loads.
494<p> 289</p>
495If you have an OldWorld Mac the bootable portion of the livecd can't be used. 290
496Instead you need to download <uri
497link="http://penguinppc.org/projects/bootx/">BootX</uri> and have a working
498MacOS installed on your system. You need to copy the <c>BootX Extension</c> from
499the unpacked archive-file into the <c>Extensions Folder</c> and make a new
500directory called <c>Linux Kernels</c> in the System Folder. In the next step you
501need to copy the <c>G3</c> kernel and the <c>initrd.img.gz</c> from the LiveCD
502into the <c>Linux Kernels</c> directory. Then reboot the system and wait for
503BootX to load. After BootX loaded you still have to set up a few items. In the
504options dialog you need to check <c>Use Specified RAM Disk</c> and select the
505<c>initrd.img.gz</c> which you put in the <c>Linux Kernels</c> directory. The
506ramdisk size should be set to at least <c>32000</c>. Furthermore the kernel
507argument needs to be set to <c>rw init=/linuxrc cdroot</c>. Eventually you are
508able to boot the LiveCD when you select Linux on Startup.
509</p> 291<p>
510
511<p>
512After the LiveCD loaded, you will be greeted by a friendly welcome message and a 292After the Installation CD loaded, you will be greeted by a friendly welcome
513<e>boot:</e> prompt at the bottom of the screen. 293message and a <e>boot:</e> prompt at the bottom of the screen.
514</p>
515
516<p> 294</p>
517At this prompt you are able to select a kernel for the subarchitecture you use. 295
518We provide <c>G3</c>, <c>G4</c> and <c>G5</c>. All kernels are built with 296<p>
297We provide one generic kernel, <e>ppc32</e>. This kernel is built with support
519support for multiple CPUs, but they will boot on single processor machines as 298for multiple CPUs, but it will boot on single processor machines as well.
520well.
521</p>
522
523<p> 299</p>
300
301<p>
524You are also able to tweak some kernel options at this prompt. The following 302You can tweak some kernel options at this prompt. The following table lists
525table lists the available boot options you can add: 303some of the available boot options you can add:
526</p> 304</p>
527 305
528<table> 306<table>
529<tr> 307<tr>
530 <th>Boot Option</th> 308 <th>Boot Option</th>
532</tr> 310</tr>
533<tr> 311<tr>
534 <ti><c>video</c></ti> 312 <ti><c>video</c></ti>
535 <ti> 313 <ti>
536 This option takes one of the following vendor-specific tags: 314 This option takes one of the following vendor-specific tags:
537 <c>radeonfb</c>, <c>rivafb</c>, <c>atyfb</c>, <c>aty128</c> or 315 <c>nvidiafb</c>, <c>radeonfb</c>, <c>rivafb</c>, <c>atyfb</c>,
538 <c>ofonly</c>. You can follow this tag with the resolution and refreshrate 316 <c>aty128</c> or <c>ofonly</c>. You can follow this tag with the resolution
539 you want to use. For instance <c>video=radeonfb:1280x1024@75</c>. If you are 317 refresh rate and color depth you want to use. For instance,
540 uncertain what to choose, <c>ofonly</c> will most certainly work. 318 <c>video=radeonfb:1280x1024@75-32</c> will select the ATI Radeon frame buffer
319 at a resolution of 1280x1024 with a refresh rate of 75Hz and a color depth of
320 32 bits. If you are uncertain what to choose, and the default doesn't work,
321 <c>video=ofonly</c> will most certainly work.
541 </ti> 322 </ti>
542</tr> 323</tr>
543<tr> 324<tr>
544 <ti><c>nol3</c></ti> 325 <ti><c>nol3</c></ti>
545 <ti> 326 <ti>
546 Disables level 3 cache on some PowerBooks (needed for at least the 17&quot;) 327 Disables level 3 cache on some PowerBooks (needed for at least the 17&quot;)
547 </ti> 328 </ti>
548</tr> 329</tr>
549<tr> 330<tr>
550 <ti><c>debug</c></ti> 331 <ti><c>dofirewire</c></ti>
551 <ti>
552 Enables verbose booting, spawns an initrd shell that can be used to debug
553 the LiveCD
554 </ti> 332 <ti>
555</tr> 333 Enables support for IEEE1394 (FireWire) devices, like external harddisks.
556<tr>
557 <ti><c>sleep=X</c></ti>
558 <ti> 334 </ti>
559 Wait X seconds before continuing; this can be needed by some very old SCSI 335</tr>
560 CD-ROMs which don't speed up the CD quick enough 336<tr>
337 <ti><c>dopcmcia</c></ti>
561 </ti> 338 <ti>
562</tr> 339 If you want to use PCMCIA devices during your installation (like PCMCIA
563<tr> 340 network cards) you have to enable this option.
564 <ti><c>bootfrom=X</c></ti>
565 <ti> 341 </ti>
566 Boot from a different device 342</tr>
343<tr>
344 <ti><c>dosshd</c></ti>
345 <ti>Starts <c>sshd</c>. Useful for unattended installs.</ti>
346</tr>
347<tr>
348 <ti><c>passwd=foo</c></ti>
349 <ti>
350 Sets whatever is after the = as the root password. Use with <c>dosshd</c>
351 for remote installs.
567 </ti> 352 </ti>
568</tr> 353</tr>
569</table> 354</table>
570 355
571<p> 356<p>
572At this prompt, hit enter, and a complete Gentoo Linux environment will be 357To use the above options, at the <e>boot:</e> prompt, type <e>ppc32</e> followed
573loaded from the CD. Continue with <uri link="#booted">And When You're 358by the desired option. In the example below, we'll force the kernel to use the
574Booted...</uri>. 359Open Firmware framebuffer instead of the device specific driver.
360</p>
361
362<pre caption="Force the use of the Open Firmware framebuffer">
363boot: <i>ppc32 video=ofonly</i>
364</pre>
365
575</p> 366<p>
367If you don't need to add any options, just type ppc32 at this prompt, and a
368complete Gentoo Linux environment will be loaded from the CD. Continue with
369<uri link="#booted">And When You're Booted...</uri>.
370</p>
576 371
577</body> 372</body>
578</subsection>
579<subsection> 373</subsection>
580<title>Alternative: Pegasos</title> 374<subsection>
375<title>Alternative: Booting the Installation CD on a Pegasos</title>
581<body> 376<body>
582 377
583<p> 378<p>
584On the Pegasos simply insert the CD and at the SmartFirmware boot-prompt type 379On the Pegasos simply insert the CD and at the SmartFirmware boot-prompt type
585<c>boot cd /boot/pegasos root=/dev/ram0 init=/linuxrc looptype=gcloop 380<c>boot cd /boot/menu</c>. This will open a small bootmenu where you can choose
586cdroot</c>. If you need any special boot options you can append them to the 381between several preconfigured video configs. If you need any special boot
587command-line. For instance <c>boot cd /boot/pegasos root=/dev/ram0 382options you can append them to the command-line just like with Yaboot above.
588init=/linuxrc looptype=gcloop cdroot video=radeonfb:1280x1024@75 mem=256M</c>. 383For example: <c>boot cd /boot/pegasos video=radeonfb:1280x1024@75 mem=256M</c>.
384The default kernel options (in case something goes wrong and you need it) are
385preconfigured with <c>console=ttyS0,115200 console=tty0 init=/linuxrc
386looptype=squashfs loop=/image.squashfs cdroot root=/dev/ram0</c>.
589</p> 387</p>
590 388
591</body> 389</body>
390</subsection>
391
592</subsection> 392<subsection>
393<title>Alternative: Booting the Installation CD with BootX</title>
394<body>
395
396<p>
397If you have an OldWorld Mac the bootable portion of the livecd can't be used.
398The most simple solution is to use MacOS 9 or earlier to bootstrap into a Linux
399environment with a tool called BootX.
400</p>
401
402<p>
403First, download <uri link="http://penguinppc.org/bootloaders/bootx/">BootX</uri>
404and unpack the archive. Copy the the <c>BootX Extension</c> from the unpacked
405archive into <c>Extensions Folder</c> and the BootX App Control Panel into
406<c>Control Panels</c>, both of which are located in your MacOS System Folder.
407Next, create a folder called "Linux Kernels" in your System folder and copy the
408<c>ppc32</c> kernel from the CD to this folder. Finally, copy <c>ppc32.igz</c>
409from the Installation CD <path>boot</path> folder into the MacOS
410<c>System Folder</c>.
411</p>
412
413<p>
414To prepare BootX, start the BootX App Control Panel. First select the Options
415dialog and check <c>Use Specified RAM Disk</c> and select <c>ppc32.igz</c> from
416your System Folder. Continue back to the initial screen and ensure that the
417ramdisk size is at least <c>32000</c>. Finally, set the kernel arguments as
418shown below:
419</p>
420
421<pre caption="BootX kernel arguments">
422cdroot root=/dev/ram0 init=linuxrc loop=image.squashfs looptype=squashfs console=tty0
423</pre>
424
425<note>
426The kernel parameters in the yaboot section above are also applicable here. You
427can append any of those options to the kernel arguments above.
428</note>
429
430<p>
431Check once more to make sure the settings are correct and then save the
432configuration. This saves typing just in case it doesn't boot or something is
433missing. Press the Linux button at the top of the window. If everything goes
434correctly, it should boot into the Installation CD. Continue with
435<uri link="#booted">And When You're Booted...</uri>
436</p>
437
438</body>
439</subsection>
440
593<subsection id="booted"> 441<subsection id="booted">
594<title>And When You're Booted...</title> 442<title>And When You're Booted...</title>
595<body> 443<body>
596 444
597<p> 445<p>
598You will be greeted by a root ("#") prompt on the current console. You can also 446You will be greeted by a root ("#") prompt on the current console. You can also
599switch to other consoles by pressing Alt-fn-F2, Alt-fn-F3 and Alt-fn-F4. Get 447switch to other consoles by pressing Alt-F2, Alt-F3 and Alt-F4. Get
600back to the one you started on by pressing Alt-fn-F1. 448back to the one you started on by pressing Alt-F1. Due to the keyboard layout,
449you may need to press Alt-fn-Fx on Apple machines.
601</p> 450</p>
602 451
603<p> 452<p>
604If you are installing Gentoo on a system with a non-US keyboard, use 453If you are installing Gentoo on a system with a non-US keyboard, use
605<c>loadkeys</c> to load the keymap for your keyboard. To list the available 454<c>loadkeys</c> to load the keymap for your keyboard. To list the available
606keymaps, execute <c>ls /usr/share/keymaps/i386</c>. Do not use the keymaps in 455keymaps, execute <c>ls /usr/share/keymaps/i386</c>.
607<path>ppc</path> or <path>mac</path> as they are for ADB-based OldWorld
608machines.
609</p> 456</p>
610 457
611<pre caption="Listing available keymaps"> 458<pre caption="Listing available keymaps">
612<comment>(PPC uses x86 keymaps on most systems. The mac/ppc keymaps provided 459<comment>(PPC uses x86 keymaps on most systems.)</comment>
613 on the LiveCD are ADB keymaps and unusable with the LiveCD kernel)</comment>
614# <i>ls /usr/share/keymaps/i386</i> 460# <i>ls /usr/share/keymaps/i386</i>
615</pre> 461</pre>
616 462
617<p> 463<p>
618Now load the keymap of your choice: 464Now load the keymap of your choice:
626Now continue with <uri link="#hardware">Extra Hardware Configuration</uri>. 472Now continue with <uri link="#hardware">Extra Hardware Configuration</uri>.
627</p> 473</p>
628 474
629</body> 475</body>
630</subsection> 476</subsection>
631<subsection id="hardware">
632<title>Extra Hardware Configuration</title>
633<body>
634 477
635<p>
636When the LiveCD boots, it tries to detect all your hardware devices and
637loads the appropriate kernel modules to support your hardware. In the
638vast majority of cases, it does a very good job. However, in some cases, it may
639not auto-load the kernel modules you need. If the PCI auto-detection missed some
640of your system's hardware, you will have to load the appropriate kernel modules
641manually.
642</p>
643
644<p>
645In the next example we try to load the <c>8139too</c> module (support for
646certain kinds of network interfaces):
647</p>
648
649<pre caption="Loading kernel modules">
650# <i>modprobe 8139too</i>
651</pre>
652
653</body>
654</subsection> 478<subsection>
479<include href="hb-install-bootconfig.xml"/>
655<subsection> 480</subsection>
656<title>Optional: Tweaking Hard Disk Performance</title>
657<body>
658 481
659<p>
660If you are an advanced user, you might want to tweak the IDE hard disk
661performance using <c>hdparm</c>. With the <c>-tT</c> options you can
662test the performance of your disk (execute it several times to get a
663more precise impression):
664</p>
665
666<pre caption="Testing disk performance">
667# <i>hdparm -tT /dev/hda</i>
668</pre>
669
670<p>
671To tweak, you can use any of the following examples (or experiment
672yourself) which use <path>/dev/hda</path> as disk (substitute with your
673disk):
674</p>
675
676<pre caption="Tweaking hard disk performance">
677<comment>Activate DMA:</comment> # <i>hdparm -d 1 /dev/hda</i>
678<comment>Activate DMA + Safe Performance-enhancing Options:</comment> # <i>hdparm -d 1 -A 1 -m 16 -u 1 -a 64 /dev/hda</i>
679</pre>
680
681</body>
682</subsection>
683<subsection id="useraccounts">
684<title>Optional: User Accounts</title>
685<body>
686
687<p>
688If you plan on giving other people access to your installation
689environment or you want to chat using <c>irssi</c> without root privileges (for
690security reasons), you need to create the necessary user accounts and change
691the root password.
692</p>
693
694<p>
695To change the root password, use the <c>passwd</c> utility:
696</p>
697
698<pre caption="Changing the root password">
699# <i>passwd</i>
700New password: <comment>(Enter your new password)</comment>
701Re-enter password: <comment>(Re-enter your password)</comment>
702</pre>
703
704<p>
705To create a user account, we first enter their credentials, followed by
706its password. We use <c>useradd</c> and <c>passwd</c> for these tasks.
707In the next example, we create a user called &quot;john&quot;.
708</p>
709
710<pre caption="Creating a user account">
711# <i>useradd -m -G users john</i>
712# <i>passwd john</i>
713New password: <comment>(Enter john's password)</comment>
714Re-enter password: <comment>(Re-enter john's password)</comment>
715</pre>
716
717<p>
718You can change your user id from root to the newly created user by using
719<c>su</c>:
720</p>
721
722<pre caption="Changing user id">
723# <i>su - john</i>
724</pre>
725
726</body>
727</subsection>
728<subsection>
729<title>Optional: Viewing Documentation while Installing</title>
730<body>
731
732<p>
733If you want to view the Gentoo Handbook (either from-CD or online) during the
734installation, make sure you have created a user account (see <uri
735link="#useraccounts">Optional: User Accounts</uri>). Then press <c>Alt-F2</c> to
736go to a new terminal and log in.
737</p>
738
739<p>
740If you want to view the documentation on the CD you can immediately run
741<c>links2</c> to read it:
742</p>
743
744<pre caption="Viewing the on-CD documentation">
745# <i>links2 /mnt/cdrom/docs/html/index.html</i>
746</pre>
747
748<p>
749However, it is preferred that you use the online Gentoo Handbook as it will be
750more recent than the one provided on the CD. You can view it using <c>links2</c>
751as well, but only after having completed the <e>Configuring your Network</e>
752chapter (otherwise you won't be able to go on the Internet to view the
753document):
754</p>
755
756<pre caption="Viewing the Online Documentation">
757# <i>links2 http://www.gentoo.org/doc/en/handbook/handbook-ppc.xml</i>
758</pre>
759
760<p>
761You can go back to your original terminal by pressing <c>Alt-F1</c>.
762</p>
763
764</body>
765</subsection>
766<subsection>
767<title>Optional: Starting the SSH Daemon</title>
768<body>
769
770<p>
771If you want to allow other users to access your computer during the
772Gentoo installation (perhaps because those users are going to help you
773install Gentoo, or even do it for you), you need to create a user
774account for them and perhaps even provide them with your root password
775(<e>only</e> do that <e>if</e> you <b>fully trust</b> that user).
776</p>
777
778<p>
779To fire up the SSH daemon, execute the following command:
780</p>
781
782<pre caption="Starting the SSH daemon">
783# <i>/etc/init.d/sshd start</i>
784</pre>
785
786<p>
787To be able to use sshd, you first need to set up your networking. Continue with
788the chapter on <uri link="?part=1&amp;chap=3">Configuring your Network</uri>.
789</p>
790
791</body>
792</subsection>
793</section> 482</section>
794</sections> 483</sections>

Legend:
Removed from v.1.32  
changed lines
  Added in v.1.65

  ViewVC Help
Powered by ViewVC 1.1.20