/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1181 - (hide annotations) (download)
Fri Dec 23 21:14:08 2005 UTC (8 years, 7 months ago) by agaffney
File size: 62500 byte(s)
  src/GLIPortage.py:
  initial commit

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1181 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.541 2005/12/23 21:14:08 agaffney Exp $
5 codeman 773
6 agaffney 1033 *GLI-0.3 (27 Oct 2005)
7 agaffney 791
8 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     initial commit
11    
12 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
13     src/GLIArchitectureTemplate.py:
14     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
15    
16 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
17     src/net/server/gliserv.py:
18     wrap generated code in a class to isolate it a bit better
19     302 redirects work
20 agaffney 1179 don't use cgi.escape() for <% %>
21 agaffney 1177 src/net/server/html/webgli/*:
22     load/save profile
23 agaffney 1178 src/GLIUtility.py:
24     change /sbin/lspci to just lspci
25 agaffney 1176
26 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
27     src/GLIClientController.py:
28     change ordering of statements in CC run() while loop to not go past the end
29     of the array
30 agaffney 1173 src/GLIArchitectureTemplate.py:
31     removed redundant bind mounts
32 agaffney 1172
33 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
34     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
35 codeman 1171 added a diagram by blackace from last night.
36     added the glossary in RTF format.
37 codeman 1170
38 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
39     x86AT: separated out emerge/configure from running of bootloader
40     added MBR drive support to lilo.
41     these changes will likely not work.
42     AT: added setup_and_run_bootloader step.
43    
44 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
45     src/net/server/gliserv.py:
46     call generated code in a function
47     src/net/server/html/webgli/*:
48     include top/bottom
49 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
50     src/GLIClientCongifuration.py:
51     install mode magic
52 agaffney 1163
53 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
54     src/GLIClientController.py:
55     use GLIException when there's an import problem
56 agaffney 1159 added debug code to show install_steps
57 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
58     add . to import path
59 agaffney 1160 proper path this time: ../../templates
60 agaffney 1162 src/GLIArchitectureTemplate.py:
61     add _portage_best_version() function
62 agaffney 1156
63 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
64     added initial glossary and gimli diagram to the docs directory.
65 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
66 codeman 1154
67 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
68     src/net/server/html/webgli/:
69     converted globaluse, localuse, networkmounts, portagetree, and stageselection
70 agaffney 1150 moved saveclientconfig stuff into clientconfig
71 agaffney 1151 moved saveconfigfiles into config files
72     converted etc_portage and makedotconf
73 agaffney 1152 converted bootloader and kernel
74 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
75 agaffney 1151 src/net/server/gliserv.py:
76     proper 404 handling for .pyhtml extension
77     HTML escape <% %> stuff
78 agaffney 1152 work around python's sucky regexes
79 agaffney 1153 src/GLIInstallProfile.py:
80     allow set_{rsync,ftp,http}_proxy() to accept empty values
81 agaffney 1149
82 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
83     src/net/server/gliserv.py:
84 agaffney 1148 initial commit of Legolas templating engine
85     302 redirects
86 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
87     minor changes for new code
88     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
89     initial commit of the conversion from the monolithic WebGLIHandler.py to the
90 agaffney 1148 one file per path Legolas goodness
91     partitioning[2-4] done
92 agaffney 1147
93 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
94     webgli: dhcp options in CC and post-install.
95     updated comparison chart.
96 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
97 codeman 1145
98 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
99     webgli_template.html: valign=top on left side.
100     webgli: fix bootloader boot_device. now working.
101 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
102 agaffney 1138
103 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
104     src/net/server/webgli_template.html:
105     increase padding for content cell to 7px and add colspan=2
106    
107 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
108     webgli: added graphic bar on top
109     webgli: added hover effects on the links on the left
110     webgli: re-rendered header_bg.png to stretch without artifacts
111    
112 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
113     webgli: make.conf disabling fixes for dynamic_stage3
114     fixed portage snapshot browse popup
115     all changes tested.
116     webgli: add debug mode to CC screen. the screen still needs lots of work.
117    
118 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
119     added debug mode question to gli-dialog
120     added CC proxies to CC networking for gli-dialog
121 codeman 1125 webgli: fixed skip CC networking if connection active
122     webgli: portage snapshot defaults to CD
123     webgli: bootloader mbr drive selection
124     webgli: USE flags unselectable if dynamic_stage3
125     webgli: manual extra packages and save button.
126    
127 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
128     src/GLIUtility.py:
129     change ping count to 2
130 agaffney 1121 docs/comparison.html
131     initial commit
132 agaffney 1119
133 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
134     src/templates/x86ArchitectureTemplate.py:
135     fix map() issue with grub code
136     replace kernel_names and initrd_names loops with one-liners
137    
138 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
139     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
140 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
141 codeman 1106 failure cleanup now an option for gli-dialog.
142 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
143     added comparison list and updated TODO!
144 codeman 1102
145 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
146     src/GLIArchitectureTemplate.py:
147     fix to stage1() debug code
148 agaffney 1098 fix to stage2() debug code
149 agaffney 1097
150 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
151     some more bootloader code fixes. forgot boot_device != mbr_device.
152 agaffney 1097
153     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
154     src/GLIStorageDevice.py:
155     fix to unallocated space merging when last one is after part 4
156 codeman 1096
157 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
158     src/GLIArchitectureTemplate.py:
159     small fix to debugging code in copy_pkg_to_chroot()
160    
161 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
162 codeman 1096 more bugfixes with bootloader code
163     gli-dialog side appears to work
164 codeman 1086
165 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
166 codeman 1080 initial adding of boot_device to backend.
167     initial boot_device support added to gli-dialog.
168 codeman 1096 some fixes of my poor coding
169 codeman 1077
170 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
171 codeman 1075 converted gli-dialog to use the install_package_list.
172     gtkfe has already been converted by AllanonJL
173 codeman 1076 new way working in gli-dialog now and added to webgli.
174 codeman 1077 added set/get_boot_device() to IP
175 codeman 1075
176 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
177     get_install_package_list added to InstallProfile. This can be used by the FEs
178    
179 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
180     src/templates/x86ArchitectureTemplate.py:
181     call ls with '-1 --color=no'
182    
183 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
184 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
185 codeman 1069
186 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
187     src/GLIArchitectureTemplate.py:
188     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
189     confused
190    
191 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
192     removed protocols from rc.conf screens
193     finished initial rc.conf and make.conf in webgli
194    
195 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
196     src/net/server/gliserv.py:
197     add -h option to usage()
198 agaffney 1063 show time and request URI in debug mode
199 agaffney 1064 show client IP in debug mode
200 agaffney 1065 just use IP instead of trying to do a reverse lookup
201 agaffney 1062
202 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
203     src/net/server/gliserv.py:
204     'classier' 401 message
205     proper commandline parsing
206     help via -h
207     user/pass can be specificed via commandline option
208    
209 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
210 agaffney 1057 src/net/server/gliserv.py:
211 agaffney 1059 basic HTTP auth
212    
213     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214     src/net/server/gliserv.py:
215 agaffney 1057 dynamic module reloading (yipee!)
216 agaffney 1058 send 'Last-Modified' header for real files
217     respond to HEAD with just headers
218 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
219     icons for drives
220    
221 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
222     src/net/server/handlers/WebGLIHandler.py:
223     initial 'pretty' partition table display support
224 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
225 agaffney 1044 radio buttons and pretty display work together
226     META redirect instead of javascript
227     pretty display stretches across entire screen
228 agaffney 1046 'Recommended layout' and 'Clear drive' functions
229 agaffney 1047 properly catch exceptions from do_recommended()
230 agaffney 1049 src/GLIArchitectureTemplate.py:
231     replace preinst, copy, postinst, rm steps with qmerge
232 agaffney 1050 whoops...that shouldn't have been commented out
233 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
234 agaffney 1052 more generic of symlink crappiness
235 agaffney 1053 new copy_pkg_to_chroot() actually works now
236 agaffney 1042
237 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
238     src/GLIStorageDevice.py:
239     initial generic disk support
240 agaffney 1040 fixes for add_partition() code
241 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
242     added support for creating generic disks
243 agaffney 1040 add new partition working
244 agaffney 1041 save and delete partitions
245 agaffney 1037
246 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
247     webgli: Partitioning making progress.
248    
249 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
250     src/GLIArchitectureTemplate.py:
251     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
252     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
253     dir) and works around /etc/gconf symlink problem
254    
255 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
256     webgli: lots of updates. preliminary partitioning. extra packages works.
257    
258 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
259     src/net/server/gliserv.py:
260     httpd now supports HTTPS and falls back to HTTP if not available
261 agaffney 1030 make fallback actually work
262 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
263     SecureSocketServer is now threaded
264    
265 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
266     src/net/client/gliclient.py:
267     try to use HTTPS for XMLRPC first and fallback to HTTP
268 agaffney 1028 pretend mode
269 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
270     HTTPS XMLRPC goodness from samyron
271 agaffney 1028 pass name of certificate
272 agaffney 1026
273 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
274     wegli: daemons and services screens done.
275    
276 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
277     webgli: networking and users screens
278     added return_redirect to handler.py
279 codeman 1022 loading and saving install/client profiles works for webgli now
280     Review also done
281 agaffney 1033
282     *GLI-0.2 (27 Oct 2005)
283 codeman 1025
284 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
285     src/templates/x86ArchitectureTemplate.py:
286     properly check for bootloader emerge exist status with exitsuccess()
287 agaffney 1010 log output of grub install command
288 agaffney 1011 add --batch --no-floppy to grub command
289 agaffney 1013 grubinstallstring only gets logged if debug is on
290 agaffney 1012 src/GLIUtility.py:
291     update progress bar to 100% when process finishes
292 agaffney 1009
293 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
294     src/GLIClientController.py:
295     added debugging code for the interaction between the 2 threads via Event()
296 agaffney 1003 src/GLIUtility.py:
297     doubled the buffer size in spawn()
298 agaffney 1004 bump buffer size up to 16384
299     only report progress in 5% increments
300 agaffney 1005 src/GLIArchitectureTemplate.py:
301     kernelpkgs.txt support code
302 agaffney 1006 above disabled because it sucks
303 agaffney 1007 added add_pkg_to_world()
304 agaffney 1002
305 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
306     src/GLIArchitectureTemplate.py:
307     use tar | tar to copy files in copy_pkg_to_chroot()
308     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
309    
310 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
311     DEBUGGING ADDED TO AT. verbose field added to CConfig.
312    
313 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
314     src/net/server/gliserv.py:
315     / maps to index.html
316     look for actual files in html/
317     src/net/html:
318     new template
319 agaffney 998 src/GLIUtility.py:
320     added parse_vdb_contents()
321     src/GLIArchitectureTemplate.py:
322     added copy_pkg_to_chroot()
323     added debug code to dynamic-stage3
324 agaffney 999 switch dynamic-stage3 to new method
325     lots of bug fixes from adding debug code
326 agaffney 993
327 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
328     webgli initial bootloader support + changed make.conf.
329 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
330 codeman 983
331 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
332 agaffney 982 src/GLIUtility.py:
333 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
334 agaffney 981 add unpack progress to portage snapshot
335 agaffney 982 use read() instead of readlines() in spawn()
336     only update progress bar for whole percents
337 agaffney 980
338 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
339     src/templates/x86ArchitectureTemplate.py:
340     change call to 'grub' to use GLIUtility.exitsuccess()
341 agaffney 977 add definition of 'build_mode' in _configure_lilo()
342 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
343     fix so subshell is called in root shell
344    
345 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
346     src/net/server/handlers/WebGLIHandler.py:
347     stage screen launches URI browser in sized window with various properties set
348    
349 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
350     src/misc/updategtkfe:
351     updated to actually work
352 agaffney 972 remove previous snapshot and extracted dir before downloading
353 agaffney 973 src/misc/updateglid:
354     updated to actually work
355 agaffney 974 src/templates/x86ArchitectureTemplate.py:
356     fixed bug where grub code was looking for 'root+root+file_name2'
357 agaffney 971
358 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
359     src/net/server/handlers/WebGLIHandler.py:
360     URI browser
361 agaffney 970 added mirror selection
362 agaffney 969 src/GLIUtility.py:
363     ls via ssh strips off ending *
364 agaffney 968
365 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
366     more updates to webgli. stage selection.
367    
368 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
369     updated webgli with preliminary Network Mounts support.
370    
371 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
372     GenDialog: string formatting and yes/no label fixes.
373     added WebGLI template for gliserv.py
374     added WebGLIHandler as well as a definition for it in gliserv.py
375     updates to the webgli files even though they won't be there for long.
376 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
377     goes public.
378 codeman 952
379 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
380     src/net/server/gliserv.py:
381     override dict to not be so anal
382 agaffney 949 main server now loads separate module to handle requests
383 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
384 agaffney 949 split out profile URLs into separate handler function
385 agaffney 950 move handlers into subdirectory
386 agaffney 956 add Welcome and Clients handlers
387 agaffney 949
388 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
389     src/GLIUtility.py:
390     raise exception if password prompt received twice
391    
392 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
393 agaffney 944 src/GLIUtility.py:
394 agaffney 943 removed rot13ify()
395    
396     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
397 agaffney 935 src/net/server/gliserv.py:
398     allow for param to be passed multiple times in GET
399 agaffney 940 no XMLRPC functions return None
400 agaffney 941 modify POST request parsing to only create a list if needed
401 agaffney 942 fix GET request parsing so the list creation for multiple values works
402 agaffney 940 src/net/client/gliclient.py:
403     various typo and type mismatch fixes
404     exit after exception
405 agaffney 935
406 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
407     src/net/client/gliclient.py:
408     initial commit
409 agaffney 934 pass MAC to XMLRPC functions
410     src/net/server/GLIServerProfile.py:
411     rename GLIClientsProfiles to GLIServerProfile
412 agaffney 933
413 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
414     src/net/server/gliserv.py:
415     now handles POST requests
416     move majority of request handling code to common_handler() to reduce code
417     duplication
418 agaffney 931 profile loading
419     client reg via XMLRPC goes into SharedInfo()
420     /showclients redesign
421     template fixes
422 agaffney 932 allow handler functions to add/change headers
423     save profile
424 agaffney 930
425 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
426     src/net/server/GLIClientsProfiles.py:
427     initial commit
428     src/net/server/template.html:
429     initial commit
430     src/net/server/gliserv.py:
431     add template mojo
432    
433 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
434     src/net/server/gliserv.py:
435     XMLRPC mojo
436    
437 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
438     src/GLIArchitectureTemplate.py:
439     add code in _edit_config() to comment line where variable is defined
440     previously
441 agaffney 920 insert new line under previous definition of variable if it exists
442 agaffney 921 small _edit_config() cleanup
443 agaffney 923 src/GLIStorageDevice.py:
444     add clear_partitions() function
445 agaffney 924 new sizes for recommended partition layout
446 agaffney 925 automatically calculate swap size for recommended layout
447 agaffney 919
448 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
449     src/templates/x86ArchitectureTemplate.py:
450     fat16 mojo
451    
452 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
453     src/GLIStorageDevice.py:
454     prevent do_recommended() from being run twice
455 agaffney 916 rewrite do_recommended() to be more robust
456 agaffney 917 src/GLIArchitectureTemplate.py:
457     rework _edit_config() to not write duplicate entries
458 agaffney 914
459 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
460     src/GLIStorageDevice.py:
461     added do_recommended() function to automatically created 256M/1G/* layout
462    
463 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
464     src/gli-dialog.py: added set_distcc to the list
465     GenDialog: added set_distcc. untested.
466     IP: added install_distcc flag.
467     AT: added install_distcc function based on the flag. runs after build_kernel
468 codeman 911 changed AT spawn command for distcc for nodeps.
469 codeman 907
470 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
471     src/GLIUtility.py:
472     add rot13ify() function
473    
474 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
475     src/GenDialog.py
476 codeman 905 added a sentence of text. unchecking support added.
477 codeman 904
478 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
479     src/GLIUtility.py
480     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
481     src/GenDialog.py
482 codeman 902 still working on extra_packages. transformed the list to new format.
483     added GRP indication to list. untested.
484 codeman 901 TODO lists updated.
485     src/fe/dialog/gli-dialog.py
486     spelling mistook.
487    
488 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
489     src/GLIUtility.py:
490     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
491    
492 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
493     src/GLIUtility.py:
494     add get_directory_listing_from_uri()
495     add http support to above
496 agaffney 892 add ftp support to above
497 agaffney 893 add scp support to above
498 agaffney 891 src/GLIArchitectureTemplate.py:
499     "0" instead of 0 for key of single-element dict passed to _edit_config()
500 agaffney 889
501 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
502     value_only -> only_value
503    
504 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
505     gutted out all of etc_portage structure since it is now all handled by
506     etc_files
507    
508 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
509     src/GLIArchitectureTemplate.py:
510     install_packages() sends progress update notifications
511 agaffney 876 src/templates/x86ArchitectureTemplate.py:
512     increase sleep to 5s between format tries
513 agaffney 882 src/GLIClientController.py:
514     pass 'self' to AT instead of 'self._pretend'
515 agaffney 874
516 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
517     logger -> logger.log in x86AT
518    
519 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
520     added set_etc_portage to IP. debugging gli-d's support for it.
521    
522 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
523     src/templates/x86ArchitectureTemplate.py:
524     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
525    
526 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
527     src/GLIArchitectureTemplate.py:
528     add _portage_best_version() function and rework install_packages() to allow
529     for future X of Y tracking
530 agaffney 860 Use best_visible instead of best_version
531 agaffney 862 tracked down and fixed missing = causing empty install extra packages
532 agaffney 864 use = when emerging also
533 agaffney 865 quickpkg hokey pokey
534 agaffney 867 run _get_packages_to_emerge() again with -pk
535 agaffney 857
536 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
537     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
538     the end of install_packages.
539 codeman 850 added updateglid to /src/misc
540 codeman 851 updated all core files with new GPL notice and copyright statement.
541 codeman 848
542 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
543     src/GLIUtility.py:
544     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
545     a snapshot in /mnt/cdrom/snapshots/
546 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
547 agaffney 846 change calls to extra package special case functions to 'self.blah'
548 agaffney 839
549 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
550     src/ArchTemplate: changed "voodoo".
551 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
552     normal emerge sync fails.
553 codeman 836 removed get_sources_from_cd because it is obsolete.
554     add special cases to install_packages. remove fatal exception on package
555     install failure b/c the box will still be bootable.
556 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
557     handled in the FEs.
558 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
559     awaiting testing.
560 codeman 830
561 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
562     src/GLIStorageDevice.py:
563     global try/except block around fs resizable detection code
564 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
565     install-failed cleanup function
566 agaffney 826
567 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
568     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
569    
570 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
571 codeman 814 GLIGenDialog:
572     add drive choices for loaded configs.
573     force snapshot for dynamic_stage3
574     init the snapshoturi input to the cd snapshot if not already selected.
575     if dynamic_stage3, skip the make.conf step.
576     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
577     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
578 codeman 812
579 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
580     src/GLIArchitectureTemplate.py:
581     manually call MAKEDEV in stage3-dynamic code
582 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
583 agaffney 815 src/GLIUtility.py:
584     add beginning of validate_uri() function
585 agaffney 817 add file:/// support to validate_uri()
586 agaffney 822 single quotes when setting livecd password
587 agaffney 811
588 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
589     src/GLIGenDialog.py:
590     change getmountpoint() to get_mountpoint()
591 agaffney 808 src/misc/updategtkfe:
592     committed script to automatically download latest snapshot and run gtkfe
593 agaffney 809 src/templates/x86ArchitectureTemplate.py:
594     fix _configure_lilo_add_windows() for IP -> GLISD stuff
595 agaffney 810 src/GLIArchitectureTemplate.py:
596     give tmp_minor an initial value in mount_local_partitions so that the value
597     remain from the previous drive
598 agaffney 807
599 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
600     src/templates/x86ArchitectureTemplate.py:
601     Fix _configure_lilo() for IP using GLISD stuff
602 agaffney 806 src/GLIArchitectureTemplate.py:
603     install_cron_daemon() treats "none" specially
604 agaffney 805
605 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
606     old patch from Steven Mertens to resolve bug #96642
607 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
608     strings renamed for global use if necessary.
609 codeman 803 fix all three parts of bug 102291
610 codeman 804 disable set_etc_portage until fully-written.
611 codeman 801
612 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
613     src/GLIClientController.py:
614     lower-case http/ftp proxy envvars
615    
616 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
617     src/GLIClientController.py:
618     log end of pre_install steps to aid in debugging
619 agaffney 798 src/templates/x86ArchitectureTemplate.py:
620     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
621 agaffney 797
622 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
623     src/GLIArchitectureTemplate.py
624     check to make sure that the device node we're wait for to exist isn't of
625     type 'free'
626    
627 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
628     src/GLIGenDialog.py:
629     convert install_packages to list in set_extra_packages()
630 agaffney 793 check return code of checklist() call in "Manual" section
631 agaffney 794 *actually* fix the first problem
632 agaffney 792
633 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
634     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
635     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
636    
637 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
638     src/GLIArchitectureTemplate.py:
639     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
640    
641 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
642     Add CDATA support to SimpleXMLParser and add utility functions for it.
643    
644 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
645     src/GLIArchitectureTemplate.py:
646     Fix case where vixie-cron is specified as a full package atom, as we still
647     don't want to run 'crontab /etc/crontab' for it.
648    
649 agaffney 788 *GLI-0.1 (3 Aug 2005)
650    
651 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
652     add scp to list of is_uri() so GenDialog doesn't complain.
653 codeman 769 fixed livecd-kernel bug in bootloader code.
654 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
655     change bootloader to allow for both initrd and initramfs.
656 codeman 777 fix IP for dynamic_stage3.
657 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
658 codeman 777
659 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
660     Added full scp:// URI support to get_uri() in GLIUtility
661 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
662     Remove print statement from scp:// code.
663 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
664 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
665 agaffney 770 Check to make sure pkg can be split on / and some debugging code
666 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
667 codeman 777 SimpleXMLParser handles True/False/None correctly now
668 agaffney 778 Comment out above fix
669 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
670 codeman 764
671 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
672     Removed a FIXME in the GLIClientConfiguration that is no
673     longer needed.
674    
675 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
676     Default to x86 in ClientConfig
677 agaffney 761 Typo in build-a-stage3 code.
678     Remove MAKEDEV call in build-a-stage3 postscript.
679 agaffney 760
680 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
681     Rewrote init of IP for gli-d. Other GenDialog updates.
682     allow network_type to be None in CConfig.
683    
684 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
685     Add _dynamic_stage3 option to IP.
686     Add check for that option to dynamic stage3 code in ArchTemplate.
687 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
688     Fix serialization of dns-servers in ClientConfig.
689 agaffney 755
690 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
691     changed default values of cron/logger in IP.
692     moved GenDialog IP init out to the individual files. gli-dialog's version
693     will change quite a bit.
694    
695 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
696     added ppcArchTemplate. blank now. working on yaboot.
697 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
698     skeleton implementation of _configure_yaboot.
699     small fixes to other templates.
700 codeman 750
701 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
702     GenDialog updates. changed comment in IP.
703    
704 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
705 robbat2 743 src/GLIInstallProfile.py:
706     Fix codeman's screwup of changing the service seperator to ',' in the parser
707     without changing it in the serialization code! Also document this in a
708     comment so you find it easier. Everybody needs to make sure they update
709     their install profiles!
710    
711     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
712 robbat2 742 src/GLIArchitectureTemplate.py:
713     Fix casting of list to string and concat of None with string, as well as
714     commented prototype of checking that mounting actually worked (found a case
715     where mount can return success, but the mount won't be done).
716    
717     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
718 robbat2 740 src/templates/x86ArchitectureTemplate.py:
719 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
720     checking for the device, and sleeping 1 second each time.
721    
722     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
723     src/templates/x86ArchitectureTemplate.py:
724 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
725     bootloader works again. Also rename _install_{grub,lilo} to
726     _configure_{grub,lilo} since they don't install the loaders anymore
727     themselves.
728    
729 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
730     fix global USE flags to not include the arch types at the end.
731     updates to GenDialog and gli-d.
732    
733 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
734     fixing bootloader code for no initrd and initrd->initramfs naming change.
735    
736 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
737     Proper comments and parameters to GLIException in install_mta()
738 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
739 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
740     list_tarball_from_mirror() to eliminate blank last item.
741 agaffney 733
742 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
743     Added stage3 generation code.
744    
745 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
746     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
747     Mild changes to GenDialog.
748    
749 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
750     Remove separate install step configure_rc_conf() since it's handled by
751     update_config_files()
752     Make a copy of newvalues in _edit_config() so quotes aren't added when the
753     function is called twice on the same file.
754    
755 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
756     Missing \ in sed in _get_packages_to_emerge()
757 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
758 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
759     _get_packages_to_emerge()
760 agaffney 726
761 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
762     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
763     in the dialog.py gauge code.
764    
765 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
766     Add code to update_config_files() to go through etc_files and update stuff.
767 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
768 agaffney 724 Only use float() in partition xml parsing code if type == "free"
769 agaffney 720
770 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
771     finished almost all internationalization of GenDialog.
772 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
773 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
774 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
775 codeman 718
776 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
777     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
778    
779 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
780     fix extra entry in list_mirrors()
781     beginning internationalization runthrough.
782    
783 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
784     added dialog.py to /src temporarily until it gets accepted upstream.
785 codeman 714 fix for unused value in form in dialog.py and changed heights.
786     fix GenDialog forms.
787 codeman 713
788 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
789     Changed hostname/domainname for new baselayout.
790     Changed _add_to_runlevel errors to logs.
791     Updated TODO list to show status of GenDialog
792     More updates to GenDialog including two checklists that probably won't work.
793 codeman 711 update IP to use comma-separated list instead of space separated for services.
794 codeman 710
795 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
796     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
797     GenDialog as it gets closer to completion.
798    
799 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
800 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
801     instead of int() in add_partition_device_partition() for minor (closes 96804)
802 agaffney 704
803     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
804     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
805     instead of 'interfaces[interface][1]' since DHCP uses that field for its
806     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
807    
808 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
809 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
810 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
811 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
812 agaffney 704 Fix undefined variable 'output' issue in spawn().
813 agaffney 697
814 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
815     More updates to GenDialog and gli-d.
816    
817 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
818     Modify list_mirrors() to return a list of mirror URL/name pairs.
819    
820 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
821     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
822     get subarch.
823    
824 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
825     Backend partitioning will create disklabel is none exists. Installprofile
826 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
827     mount_local_partitions() to remember device along with minor in the
828 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
829     add else block to log unsupported netmount types to mount_network_shares()
830 agaffney 691
831 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
832     src/GLIArchitectureTemplate.py:
833 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
834     src/fe/cli/clife.py:
835     Logging system.
836     src/GLIUtility.py, src/GLIStorageDevice.py:
837     Add comments about re-writes needed for boxes without sysfs.
838    
839     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
840     src/GLIArchitectureTemplate.py:
841 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
842     'make dep' call for custom compile. build_mode support for prepare-only and
843     none types completed. custom compile function chains shell functions in
844     spawned script, to allow for catching all errors.
845    
846 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
847     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
848     and GenDialog. other gendialog updates as well. kernel updates untested.
849    
850 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
851     src/GLIInstallProfile.py:
852     Change structure of etc-portage stuff. The serialization was broken before my
853     last commit, and I am the only person that's ever used it. The new schema is
854     as follows:
855     <etc-portage>
856     <file name="package.mask"/>
857     <file name="package.unmask">
858     <entry atom="sys-kernel/openmosix-sources"/>
859     </file>
860     <file name="package.use">
861     <entry atom="sys-libs/db">
862     -java
863     </entry>
864     <entry atom="dev-libs/cyrus-sasl">
865     -ldap
866     </entry>
867     </file>
868     </etc-portage>
869    
870    
871 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
872     src/GLIInstallProfile.py:
873     Add new entry for gli-profile/kernel-build-method item. Add missing
874     serialize_etc_portage (temporary). Make serialize_make_conf always print the
875     keys in the same order.
876    
877 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
878     src/GLIArchitectureTemplate.py:
879 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
880     was repeatedly appended to make.conf.
881    
882     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
883     src/GLIArchitectureTemplate.py:
884 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
885     successfully mounted swap device for using swapoff. Add proper error checking
886     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
887     'file'. Clean up some redundant code (thanks to pychecker).'
888    
889 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
890 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
891 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
892     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
893 agaffney 668
894 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
895     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
896     in add_network_interface.
897    
898 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
899     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
900     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
901 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
902     prepare_chroot.
903 robbat2 664
904 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
905     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
906     +src/fe/installer-gtk:
907     Add new automated CLI frontend. Add scripts that are the intended means to
908     use each frontend.
909    
910 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
911 robbat2 663 src/GLIClientController.py:
912     Add null type to network config, for cases where the interface is already up
913     and should not be touched (netboot for example).
914    
915     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
916 robbat2 652 src/GLIArchitectureTemplate.py:
917 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
918     string!. Try to use binary packages if available by default.
919    
920     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
921     src/GLIArchitectureTemplate.py:
922 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
923     actually exists before we try to add it. set_services phase must take place
924     after the package installation, otherwise the init scripts might not exist.
925     Find the correct init script for the cron and logging daemons, and add that
926     instead of the package atom.
927    
928     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
929     src/GLIArchitectureTemplate.py:
930 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
931     usage of 'file' to 'contents' for the variable name, as it shadows
932     __builtin__.file.
933    
934     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
935     src/GLIArchitectureTemplate.py:
936 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
937     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
938     for 'none' kernel config for build_kernel phase. Put kernel_script in
939     /var/tmp instead of /root for build_kernel phase.
940    
941 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
942     Rename mta variables to match syslog/cron variables.
943    
944 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
945 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
946     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
947     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
948     src/templates/.cvsignore, src/tests/.cvsignore:
949     Refactor partition formatting again to include error checking. Allow 'none'
950     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
951    
952     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
953 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
954     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
955     only have a single spawn call.
956    
957 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
958     refixed samyron's fix of set_architecture_template.
959    
960 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
961     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
962     be executable.
963    
964 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
965     Fixed one of the FIXME's in the ClientConfiguration. There is now some
966     error checking when you call set_architecture_template.
967    
968 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
969     moved the mkfsopts input to the partition options menu instead of the during
970     the creation process. updated GenDialog to say it supports reiserfs v3.
971    
972 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
973     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
974     Complete support for 'mkfsopts' parameter in main system and dialogfe.
975     Add support for other partition types to dialogfe.
976     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
977     avoid integer overflows and wraparounds.
978    
979 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
980     Removed start/end from XML output and added mkfsopts to partitioning info.
981 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
982 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
983 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
984     partitioning. Fix free space overwriting bug. Remove a few unused functions
985 agaffney 640 from rewrite. Fix call to get_partition_at()
986 agaffney 631
987 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
988     Updates to GenDialog and dialogfe.
989    
990 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
991 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
992 agaffney 627
993 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
994     more GenDialog updates to partitioning.
995    
996 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
997     Indenting issue in GLISD/get_ordered_partition_list.
998     updates to GenDialog partitioning and added default UTC for timezone in IP.
999    
1000 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1001     Added GLISD.get_model()
1002    
1003 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1004     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1005     More updates to GenDialog :)
1006    
1007 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1008     Added get_interface_realname() function.
1009    
1010 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1011     Added auto-save of CConfig and copying to new /root after install.
1012     yet even more GenDialog updates.
1013    
1014 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1015     removed print statement from GLISD. more updates to GenDialog.
1016    
1017 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1019 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1020 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1021     places in GLIClientConfiguration.
1022 agaffney 608
1023 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1024     Fix mount_local_partitions(), configure_fstab(), and
1025 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1026 agaffney 601 A few more fixes for templates/x86Archtemplate
1027 agaffney 599
1028 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1029     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1030     a work in progress.
1031    
1032 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1033     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1034     directly. GLISD can now handle data imported from XML.
1035    
1036 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1037     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1038     handle blank (no disklabel) disks.
1039    
1040 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1041     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1042     up, documented, and separated out serialization and grouped all sections.
1043    
1044 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1045     Reorganization of ClientConfiguration and gutting of unused functions.
1046     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1047    
1048 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1049     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1050    
1051 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1052 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1053 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1054     copies it into /mnt/gentoo/root
1055 agaffney 588
1056 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1057     Moved URI parsing into new function parse_uri()
1058    
1059 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1060     Added XMLParser module.
1061    
1062 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1064 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1065 agaffney 580
1066 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1067     Updated finishing_cleanup for new unmounting method from agaffney.
1068    
1069 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1070 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1071 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1072     unicode support to is_realstring().
1073 agaffney 575
1074 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1075 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1076 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1077 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1078     instead of --nocolor.
1079 agaffney 571
1080 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1081     Added GLIGenDialog.py to make a generic class for the dialog functions that
1082 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1083     date changes. 2004->2005.
1084 codeman 566
1085 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1086     Removed 'quiet=True' from spawn() calls
1087    
1088 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1089     Updated GLIUtility with patches from chotchki. Also added documentation
1090    
1091 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1092     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1093     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1094     from bug #89683, mostly touchups.
1095    
1096 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1097     GLIStorageDevice cleanup patch from bug #91761
1098    
1099 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1101 agaffney 553 _edit_config(). Error logging casts 'error' to str
1102 agaffney 551
1103 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1104 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1105     code to CC to handle exceptions *not* thrown by the installer itself.
1106 agaffney 548
1107 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1108     get_max_mb_for_resize() returns -1 if not self.resizeable
1109    
1110     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1111 agaffney 539 More dirty rsync hacks :-/
1112    
1113 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1114     Patches from chotchki (bug #90325) to improve CC networking. untested.
1115    
1116 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1117 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1118 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1119 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1120 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1121 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1122     _get_packages_to_emerge()
1123 agaffney 528
1124 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1125     Added group-adding code to set_users in ArchTemplate
1126    
1127 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1128     Added post-install script code
1129    
1130 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1131     Fixed encapsulation issues in GLIClientController (bug #90141)
1132    
1133 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1134     Update resizing code in GLIStorageDevice
1135    
1136 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1137     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1138    
1139 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1140     Reverted change to ArchTemplate and added support for commented line in old
1141     code.
1142    
1143 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1144     Changed _edit_config() to modify value in-place instead of commenting out and
1145     adding the new value to the end of the file.
1146    
1147 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1148     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1149     Also updated TODO list.
1150    
1151 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1152     Use blackace's one-liner to add comments for all function for use with
1153     pythondoc.
1154    
1155 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1156     Moved 'end >= device_sectors' check out of loop to check for next partition's
1157 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1158 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1159     point of logical is now adjusted along with start.
1160 agaffney 503
1161 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1162 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1163 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1164     key in partition information due to new partition code leaving them as float.
1165 agaffney 497
1166 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1168 agaffney 494
1169 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1170     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1171    
1172     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1173 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1174    
1175 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1176 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1177     sed to properly strip out junk.
1178 agaffney 481
1179 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1180 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1181 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1182 codeman 475
1183 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1184     Fixed indent problem in GLICController
1185    
1186 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1187     Check for disklabel type "loop" and use the device name without a minor.
1188    
1189 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1190     Remove /tmp/compile_output.log and /var/log/install.log when install is
1191 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1192 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1193 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1194 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1195 agaffney 453
1196 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1197 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1198     when unpacking tarball.
1199 agaffney 451
1200 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1201 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1202     filesystem_tools code.
1203 codeman 443
1204 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1205     Changed the print statements to logging in the partitioning BE code.
1206     the logger may need to be imported to the x86archtemplate. unknown yet.
1207 codeman 432 Added the finishing_cleanup function.
1208 codeman 433 added a fix to the logger from BenUrban
1209 codeman 427
1210 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1211     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1212     URIs. The blank uri check has been commented out.
1213 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1214 codeman 422
1215 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1216     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1217    
1218 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1219     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1220 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1221 agaffney 415
1222 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1223     small changes to setup_network_post. moved adding to runlevel of net.x to
1224     after the device gets symlinked. added domainname runlevel command.
1225    
1226 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1227 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1228 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1229     spawn() call in livecd-kernel code to pass environment variables.
1230 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1231     the install profile if available.
1232 agaffney 402
1233     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1234 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1235     to handle installing the livecd kernel into the new system.
1236    
1237 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1238     should emerge hotplug and coldplug before adding them to runlevel.
1239    
1240 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1241 codeman 395 took chroot out of grub_install command.
1242    
1243     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1244     Changed chroot wrapper code in spawn() to write the wrapper the python way
1245     instead of the bash way to avoid quote conflicts. Added
1246 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1247 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1248     as it breaks the piping.
1249 codeman 390
1250 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1251     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1252    
1253 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1254     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1255 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1256 agaffney 389 GLIInstallProfile.
1257 agaffney 385
1258 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1259 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1260     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1261     into /mnt/gentoo in prepare_chroot()
1262 agaffney 379
1263 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1264     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1265 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1266     to start/end sectors
1267 agaffney 375
1268     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 agaffney 374 Add 2>&1 to cmd in spawn()
1270    
1271 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1272     Modified GLIUtility.exitsuccess() to work with return value from
1273 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1274     creates wrapper script for commands run inside chroot so multiple commands
1275 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1276     for the generated script from spawn()
1277 agaffney 369
1278 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1279     Removed default values for stage tarball URI and portage tree URI from
1280     InstallProfile. These should be set by the FEs. also added services step to
1281     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1282     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1283    
1284 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1285     Small fix for setting the default gateway. Also added feature to dialogfe.
1286    
1287 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1288     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1289    
1290 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1291 codeman 346 Fixed a bunch of true -> True typos. lots of em
1292 codeman 347 only write new resolv.conf if there are dns servers listed.
1293 codeman 345
1294 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1295     Commented out 'display_on_tty8=True' in start_portmap()
1296    
1297 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1298     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1299    
1300 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1301 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1302     lang parameter to __init__()
1303 codeman 331
1304     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1305     updates to TODO list.
1306 esammer 4
1307 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1308 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1309     'emerge -p blah'
1310 agaffney 322
1311 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1312 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1313     added quickpkg to TODO list
1314 codeman 319
1315 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1316     Changed the raising of 'warning' exceptions to a simple log of the error
1317     so that the installer can continue.
1318    
1319 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1320     Some big changes. First, changed most output to display_on_tty8.
1321     Second, added log lines to all templates. Some smaller fixes such as typos.
1322     Also did some cleanups of old commented lines.
1323    
1324 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1325 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1326 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1327 agaffney 310
1328 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1329     more updates to TODO list. hopefully we'll soon start removing items instead
1330     of adding them.
1331    
1332 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1333     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1334    
1335 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1336 codeman 295 updated TODO list. (again)
1337 codeman 293
1338 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1339     changed output of portmap start to display_on_tty8.
1340     fixed bootloader for udev and multiple kernels
1341 codeman 288 fixed custom kernel config (again)
1342 codeman 286
1343 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1344     changed default value of CC._enable_ssh to True because this is smart.
1345 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1346 codeman 281
1347 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1348     partition() now waits until after it checks for partition flags before delete
1349     the partitions :P
1350    
1351 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1352 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1353 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1354     blank.
1355 agaffney 271
1356 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1357     Various fixes related to the add_users function. Still not yet finished.
1358 codeman 269 Added things to the TODO list. Lets start using that!
1359 codeman 268
1360 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1361     Added code to x86Template to format newly created partitions. Also added
1362 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1363 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1364     mounting code.
1365 agaffney 264
1366 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1367     Took out unnecessary setting of random livecd root password. the cd already
1368     sets it randomly.
1369    
1370 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1371     Took out an unneeded step from CC's run()
1372    
1373 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1374     Attempt at detecting and adding windows partitions to lilo.
1375    
1376 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1377 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1378     partition. fixed misc exit_status => exitstatus typo.
1379 codeman 235
1380 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1382     resizing ntfs and ext2/3.
1383 agaffney 230
1384 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1385     Fixed partition() in x86Template so that it scans through logicals and deletes
1386 agaffney 229 before deleting containing extended partition. Also clears partition table to
1387     be safe before third pass.
1388 agaffney 228
1389 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1390     Added mount_network_shares. not able to test it from this computer.
1391     will test when i get back to school.
1392     also added start_portmap to the client_controller as an always-do.
1393     agaffney says this is needed for NFS mounts to work.
1394    
1395 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1396     Partial rewrite of partitioning code in x86Template. No longer shells out to
1397     parted to perform actions, now uses all pyparted calls. Code "works" in a
1398     test, but still needs lots of TLC. Also modified tests/install.py to work
1399     with x86Template and GLIClientConfiguration.
1400    
1401 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1402     Initial move of partitioning code from ArchTemplate to x86Template.
1403 agaffney 220
1404 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1405 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1406 codeman 222
1407     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1408 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1409     Test Install ran very well (skipping partitioning).
1410    
1411 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1412 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1413 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1414     some may still have eluded me.
1415 codeman 215
1416     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1417 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1418     Just finished mount_local_partitions in GLIArchitectureTemplate
1419    
1420 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1421     Added get_num_sectors() to GLIStorageDevice.
1422    
1423     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1424 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1425 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1426     from GLIInstallProfile.
1427 agaffney 205
1428 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1429     GLIStorageDevice returns "unknown" instead of "" for get_type()
1430    
1431 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1432 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1433     actually work. Commented out resizability checking code for speed.
1434 agaffney 183
1435 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1436     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1437     GLIStorageDevice at the suggestion of plors
1438    
1439 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1440     Added a function to GLIUtility to pull a value from a make.conf-style config
1441 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1442 agaffney 162
1443 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1444 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1445     network mounts from partition data structure in GLIInstallProfile
1446 agaffney 161
1447 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1448     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1449     can be resized.
1450    
1451 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1452     Added some of the final functions to GLIInstallTemplate.
1453     Yes this project is still active despite rare use of the Changelog!
1454    
1455 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1456     Added the GLIPartitionTools.py file. This is a temporary insertion of
1457     partitioning tools that will eventually go into their own package.
1458    
1459 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1460     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1461     for the program). Added __init__(install_profile, client_configuration) to
1462     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1463     to avoid constantly passing stuff every time we call a method.
1464    
1465 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1466    
1467     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1468     files without messing up all the other stuff in them. This will be used for making
1469     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1470    
1471 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1472    
1473     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1474     have a few basic things. I added two private methods. One is _depends(). This
1475     will be used for dependency checking (ie. unpacking a tarball requires that
1476     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1477     same syntax as os.system(), however, instead of being run in the liveCD
1478     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1479     isolated the code. Hope to work more this week to get this class formed...
1480    
1481 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1482    
1483     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1484     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1485     to allow for easier modification (mutable, rather than immutable objects). Updated
1486     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1487     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1488     Added initial unit test code.
1489    
1490 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1491    
1492     Added initial changelog. Setting up the basic structure of the CVS repository
1493     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1494     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20