/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1182 - (hide annotations) (download)
Fri Dec 23 22:32:57 2005 UTC (8 years, 8 months ago) by agaffney
File size: 62624 byte(s)
  move some of portage function from GLIAT
  src/GLIArchitectureTemplate.py:
  revamp install_packages() for new GLIPortage

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1182 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.542 2005/12/23 22:32:57 agaffney Exp $
5 codeman 773
6 agaffney 1033 *GLI-0.3 (27 Oct 2005)
7 agaffney 791
8 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     initial commit
11 agaffney 1182 move some of portage function from GLIAT
12     src/GLIArchitectureTemplate.py:
13     revamp install_packages() for new GLIPortage
14 agaffney 1181
15 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
16     src/GLIArchitectureTemplate.py:
17     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
18    
19 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
20     src/net/server/gliserv.py:
21     wrap generated code in a class to isolate it a bit better
22     302 redirects work
23 agaffney 1179 don't use cgi.escape() for <% %>
24 agaffney 1177 src/net/server/html/webgli/*:
25     load/save profile
26 agaffney 1178 src/GLIUtility.py:
27     change /sbin/lspci to just lspci
28 agaffney 1176
29 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
30     src/GLIClientController.py:
31     change ordering of statements in CC run() while loop to not go past the end
32     of the array
33 agaffney 1173 src/GLIArchitectureTemplate.py:
34     removed redundant bind mounts
35 agaffney 1172
36 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
37     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
38 codeman 1171 added a diagram by blackace from last night.
39     added the glossary in RTF format.
40 codeman 1170
41 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
42     x86AT: separated out emerge/configure from running of bootloader
43     added MBR drive support to lilo.
44     these changes will likely not work.
45     AT: added setup_and_run_bootloader step.
46    
47 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
48     src/net/server/gliserv.py:
49     call generated code in a function
50     src/net/server/html/webgli/*:
51     include top/bottom
52 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
53     src/GLIClientCongifuration.py:
54     install mode magic
55 agaffney 1163
56 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
57     src/GLIClientController.py:
58     use GLIException when there's an import problem
59 agaffney 1159 added debug code to show install_steps
60 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
61     add . to import path
62 agaffney 1160 proper path this time: ../../templates
63 agaffney 1162 src/GLIArchitectureTemplate.py:
64     add _portage_best_version() function
65 agaffney 1156
66 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
67     added initial glossary and gimli diagram to the docs directory.
68 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
69 codeman 1154
70 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
71     src/net/server/html/webgli/:
72     converted globaluse, localuse, networkmounts, portagetree, and stageselection
73 agaffney 1150 moved saveclientconfig stuff into clientconfig
74 agaffney 1151 moved saveconfigfiles into config files
75     converted etc_portage and makedotconf
76 agaffney 1152 converted bootloader and kernel
77 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
78 agaffney 1151 src/net/server/gliserv.py:
79     proper 404 handling for .pyhtml extension
80     HTML escape <% %> stuff
81 agaffney 1152 work around python's sucky regexes
82 agaffney 1153 src/GLIInstallProfile.py:
83     allow set_{rsync,ftp,http}_proxy() to accept empty values
84 agaffney 1149
85 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
86     src/net/server/gliserv.py:
87 agaffney 1148 initial commit of Legolas templating engine
88     302 redirects
89 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
90     minor changes for new code
91     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
92     initial commit of the conversion from the monolithic WebGLIHandler.py to the
93 agaffney 1148 one file per path Legolas goodness
94     partitioning[2-4] done
95 agaffney 1147
96 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
97     webgli: dhcp options in CC and post-install.
98     updated comparison chart.
99 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
100 codeman 1145
101 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
102     webgli_template.html: valign=top on left side.
103     webgli: fix bootloader boot_device. now working.
104 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
105 agaffney 1138
106 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
107     src/net/server/webgli_template.html:
108     increase padding for content cell to 7px and add colspan=2
109    
110 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
111     webgli: added graphic bar on top
112     webgli: added hover effects on the links on the left
113     webgli: re-rendered header_bg.png to stretch without artifacts
114    
115 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
116     webgli: make.conf disabling fixes for dynamic_stage3
117     fixed portage snapshot browse popup
118     all changes tested.
119     webgli: add debug mode to CC screen. the screen still needs lots of work.
120    
121 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
122     added debug mode question to gli-dialog
123     added CC proxies to CC networking for gli-dialog
124 codeman 1125 webgli: fixed skip CC networking if connection active
125     webgli: portage snapshot defaults to CD
126     webgli: bootloader mbr drive selection
127     webgli: USE flags unselectable if dynamic_stage3
128     webgli: manual extra packages and save button.
129    
130 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
131     src/GLIUtility.py:
132     change ping count to 2
133 agaffney 1121 docs/comparison.html
134     initial commit
135 agaffney 1119
136 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
137     src/templates/x86ArchitectureTemplate.py:
138     fix map() issue with grub code
139     replace kernel_names and initrd_names loops with one-liners
140    
141 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
142     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
143 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
144 codeman 1106 failure cleanup now an option for gli-dialog.
145 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
146     added comparison list and updated TODO!
147 codeman 1102
148 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
149     src/GLIArchitectureTemplate.py:
150     fix to stage1() debug code
151 agaffney 1098 fix to stage2() debug code
152 agaffney 1097
153 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
154     some more bootloader code fixes. forgot boot_device != mbr_device.
155 agaffney 1097
156     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
157     src/GLIStorageDevice.py:
158     fix to unallocated space merging when last one is after part 4
159 codeman 1096
160 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
161     src/GLIArchitectureTemplate.py:
162     small fix to debugging code in copy_pkg_to_chroot()
163    
164 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
165 codeman 1096 more bugfixes with bootloader code
166     gli-dialog side appears to work
167 codeman 1086
168 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
169 codeman 1080 initial adding of boot_device to backend.
170     initial boot_device support added to gli-dialog.
171 codeman 1096 some fixes of my poor coding
172 codeman 1077
173 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
174 codeman 1075 converted gli-dialog to use the install_package_list.
175     gtkfe has already been converted by AllanonJL
176 codeman 1076 new way working in gli-dialog now and added to webgli.
177 codeman 1077 added set/get_boot_device() to IP
178 codeman 1075
179 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
180     get_install_package_list added to InstallProfile. This can be used by the FEs
181    
182 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
183     src/templates/x86ArchitectureTemplate.py:
184     call ls with '-1 --color=no'
185    
186 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
187 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
188 codeman 1069
189 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
190     src/GLIArchitectureTemplate.py:
191     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
192     confused
193    
194 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
195     removed protocols from rc.conf screens
196     finished initial rc.conf and make.conf in webgli
197    
198 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
199     src/net/server/gliserv.py:
200     add -h option to usage()
201 agaffney 1063 show time and request URI in debug mode
202 agaffney 1064 show client IP in debug mode
203 agaffney 1065 just use IP instead of trying to do a reverse lookup
204 agaffney 1062
205 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
206     src/net/server/gliserv.py:
207     'classier' 401 message
208     proper commandline parsing
209     help via -h
210     user/pass can be specificed via commandline option
211    
212 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213 agaffney 1057 src/net/server/gliserv.py:
214 agaffney 1059 basic HTTP auth
215    
216     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
217     src/net/server/gliserv.py:
218 agaffney 1057 dynamic module reloading (yipee!)
219 agaffney 1058 send 'Last-Modified' header for real files
220     respond to HEAD with just headers
221 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
222     icons for drives
223    
224 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
225     src/net/server/handlers/WebGLIHandler.py:
226     initial 'pretty' partition table display support
227 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
228 agaffney 1044 radio buttons and pretty display work together
229     META redirect instead of javascript
230     pretty display stretches across entire screen
231 agaffney 1046 'Recommended layout' and 'Clear drive' functions
232 agaffney 1047 properly catch exceptions from do_recommended()
233 agaffney 1049 src/GLIArchitectureTemplate.py:
234     replace preinst, copy, postinst, rm steps with qmerge
235 agaffney 1050 whoops...that shouldn't have been commented out
236 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
237 agaffney 1052 more generic of symlink crappiness
238 agaffney 1053 new copy_pkg_to_chroot() actually works now
239 agaffney 1042
240 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
241     src/GLIStorageDevice.py:
242     initial generic disk support
243 agaffney 1040 fixes for add_partition() code
244 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
245     added support for creating generic disks
246 agaffney 1040 add new partition working
247 agaffney 1041 save and delete partitions
248 agaffney 1037
249 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
250     webgli: Partitioning making progress.
251    
252 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
253     src/GLIArchitectureTemplate.py:
254     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
255     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
256     dir) and works around /etc/gconf symlink problem
257    
258 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
259     webgli: lots of updates. preliminary partitioning. extra packages works.
260    
261 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
262     src/net/server/gliserv.py:
263     httpd now supports HTTPS and falls back to HTTP if not available
264 agaffney 1030 make fallback actually work
265 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
266     SecureSocketServer is now threaded
267    
268 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
269     src/net/client/gliclient.py:
270     try to use HTTPS for XMLRPC first and fallback to HTTP
271 agaffney 1028 pretend mode
272 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
273     HTTPS XMLRPC goodness from samyron
274 agaffney 1028 pass name of certificate
275 agaffney 1026
276 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
277     wegli: daemons and services screens done.
278    
279 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
280     webgli: networking and users screens
281     added return_redirect to handler.py
282 codeman 1022 loading and saving install/client profiles works for webgli now
283     Review also done
284 agaffney 1033
285     *GLI-0.2 (27 Oct 2005)
286 codeman 1025
287 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
288     src/templates/x86ArchitectureTemplate.py:
289     properly check for bootloader emerge exist status with exitsuccess()
290 agaffney 1010 log output of grub install command
291 agaffney 1011 add --batch --no-floppy to grub command
292 agaffney 1013 grubinstallstring only gets logged if debug is on
293 agaffney 1012 src/GLIUtility.py:
294     update progress bar to 100% when process finishes
295 agaffney 1009
296 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
297     src/GLIClientController.py:
298     added debugging code for the interaction between the 2 threads via Event()
299 agaffney 1003 src/GLIUtility.py:
300     doubled the buffer size in spawn()
301 agaffney 1004 bump buffer size up to 16384
302     only report progress in 5% increments
303 agaffney 1005 src/GLIArchitectureTemplate.py:
304     kernelpkgs.txt support code
305 agaffney 1006 above disabled because it sucks
306 agaffney 1007 added add_pkg_to_world()
307 agaffney 1002
308 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
309     src/GLIArchitectureTemplate.py:
310     use tar | tar to copy files in copy_pkg_to_chroot()
311     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
312    
313 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
314     DEBUGGING ADDED TO AT. verbose field added to CConfig.
315    
316 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
317     src/net/server/gliserv.py:
318     / maps to index.html
319     look for actual files in html/
320     src/net/html:
321     new template
322 agaffney 998 src/GLIUtility.py:
323     added parse_vdb_contents()
324     src/GLIArchitectureTemplate.py:
325     added copy_pkg_to_chroot()
326     added debug code to dynamic-stage3
327 agaffney 999 switch dynamic-stage3 to new method
328     lots of bug fixes from adding debug code
329 agaffney 993
330 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
331     webgli initial bootloader support + changed make.conf.
332 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
333 codeman 983
334 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
335 agaffney 982 src/GLIUtility.py:
336 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
337 agaffney 981 add unpack progress to portage snapshot
338 agaffney 982 use read() instead of readlines() in spawn()
339     only update progress bar for whole percents
340 agaffney 980
341 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
342     src/templates/x86ArchitectureTemplate.py:
343     change call to 'grub' to use GLIUtility.exitsuccess()
344 agaffney 977 add definition of 'build_mode' in _configure_lilo()
345 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
346     fix so subshell is called in root shell
347    
348 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
349     src/net/server/handlers/WebGLIHandler.py:
350     stage screen launches URI browser in sized window with various properties set
351    
352 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
353     src/misc/updategtkfe:
354     updated to actually work
355 agaffney 972 remove previous snapshot and extracted dir before downloading
356 agaffney 973 src/misc/updateglid:
357     updated to actually work
358 agaffney 974 src/templates/x86ArchitectureTemplate.py:
359     fixed bug where grub code was looking for 'root+root+file_name2'
360 agaffney 971
361 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
362     src/net/server/handlers/WebGLIHandler.py:
363     URI browser
364 agaffney 970 added mirror selection
365 agaffney 969 src/GLIUtility.py:
366     ls via ssh strips off ending *
367 agaffney 968
368 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
369     more updates to webgli. stage selection.
370    
371 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
372     updated webgli with preliminary Network Mounts support.
373    
374 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
375     GenDialog: string formatting and yes/no label fixes.
376     added WebGLI template for gliserv.py
377     added WebGLIHandler as well as a definition for it in gliserv.py
378     updates to the webgli files even though they won't be there for long.
379 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
380     goes public.
381 codeman 952
382 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
383     src/net/server/gliserv.py:
384     override dict to not be so anal
385 agaffney 949 main server now loads separate module to handle requests
386 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
387 agaffney 949 split out profile URLs into separate handler function
388 agaffney 950 move handlers into subdirectory
389 agaffney 956 add Welcome and Clients handlers
390 agaffney 949
391 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
392     src/GLIUtility.py:
393     raise exception if password prompt received twice
394    
395 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
396 agaffney 944 src/GLIUtility.py:
397 agaffney 943 removed rot13ify()
398    
399     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
400 agaffney 935 src/net/server/gliserv.py:
401     allow for param to be passed multiple times in GET
402 agaffney 940 no XMLRPC functions return None
403 agaffney 941 modify POST request parsing to only create a list if needed
404 agaffney 942 fix GET request parsing so the list creation for multiple values works
405 agaffney 940 src/net/client/gliclient.py:
406     various typo and type mismatch fixes
407     exit after exception
408 agaffney 935
409 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
410     src/net/client/gliclient.py:
411     initial commit
412 agaffney 934 pass MAC to XMLRPC functions
413     src/net/server/GLIServerProfile.py:
414     rename GLIClientsProfiles to GLIServerProfile
415 agaffney 933
416 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
417     src/net/server/gliserv.py:
418     now handles POST requests
419     move majority of request handling code to common_handler() to reduce code
420     duplication
421 agaffney 931 profile loading
422     client reg via XMLRPC goes into SharedInfo()
423     /showclients redesign
424     template fixes
425 agaffney 932 allow handler functions to add/change headers
426     save profile
427 agaffney 930
428 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
429     src/net/server/GLIClientsProfiles.py:
430     initial commit
431     src/net/server/template.html:
432     initial commit
433     src/net/server/gliserv.py:
434     add template mojo
435    
436 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
437     src/net/server/gliserv.py:
438     XMLRPC mojo
439    
440 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
441     src/GLIArchitectureTemplate.py:
442     add code in _edit_config() to comment line where variable is defined
443     previously
444 agaffney 920 insert new line under previous definition of variable if it exists
445 agaffney 921 small _edit_config() cleanup
446 agaffney 923 src/GLIStorageDevice.py:
447     add clear_partitions() function
448 agaffney 924 new sizes for recommended partition layout
449 agaffney 925 automatically calculate swap size for recommended layout
450 agaffney 919
451 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
452     src/templates/x86ArchitectureTemplate.py:
453     fat16 mojo
454    
455 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
456     src/GLIStorageDevice.py:
457     prevent do_recommended() from being run twice
458 agaffney 916 rewrite do_recommended() to be more robust
459 agaffney 917 src/GLIArchitectureTemplate.py:
460     rework _edit_config() to not write duplicate entries
461 agaffney 914
462 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
463     src/GLIStorageDevice.py:
464     added do_recommended() function to automatically created 256M/1G/* layout
465    
466 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
467     src/gli-dialog.py: added set_distcc to the list
468     GenDialog: added set_distcc. untested.
469     IP: added install_distcc flag.
470     AT: added install_distcc function based on the flag. runs after build_kernel
471 codeman 911 changed AT spawn command for distcc for nodeps.
472 codeman 907
473 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
474     src/GLIUtility.py:
475     add rot13ify() function
476    
477 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
478     src/GenDialog.py
479 codeman 905 added a sentence of text. unchecking support added.
480 codeman 904
481 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
482     src/GLIUtility.py
483     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
484     src/GenDialog.py
485 codeman 902 still working on extra_packages. transformed the list to new format.
486     added GRP indication to list. untested.
487 codeman 901 TODO lists updated.
488     src/fe/dialog/gli-dialog.py
489     spelling mistook.
490    
491 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
492     src/GLIUtility.py:
493     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
494    
495 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
496     src/GLIUtility.py:
497     add get_directory_listing_from_uri()
498     add http support to above
499 agaffney 892 add ftp support to above
500 agaffney 893 add scp support to above
501 agaffney 891 src/GLIArchitectureTemplate.py:
502     "0" instead of 0 for key of single-element dict passed to _edit_config()
503 agaffney 889
504 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
505     value_only -> only_value
506    
507 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
508     gutted out all of etc_portage structure since it is now all handled by
509     etc_files
510    
511 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
512     src/GLIArchitectureTemplate.py:
513     install_packages() sends progress update notifications
514 agaffney 876 src/templates/x86ArchitectureTemplate.py:
515     increase sleep to 5s between format tries
516 agaffney 882 src/GLIClientController.py:
517     pass 'self' to AT instead of 'self._pretend'
518 agaffney 874
519 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
520     logger -> logger.log in x86AT
521    
522 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
523     added set_etc_portage to IP. debugging gli-d's support for it.
524    
525 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
526     src/templates/x86ArchitectureTemplate.py:
527     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
528    
529 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
530     src/GLIArchitectureTemplate.py:
531     add _portage_best_version() function and rework install_packages() to allow
532     for future X of Y tracking
533 agaffney 860 Use best_visible instead of best_version
534 agaffney 862 tracked down and fixed missing = causing empty install extra packages
535 agaffney 864 use = when emerging also
536 agaffney 865 quickpkg hokey pokey
537 agaffney 867 run _get_packages_to_emerge() again with -pk
538 agaffney 857
539 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
540     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
541     the end of install_packages.
542 codeman 850 added updateglid to /src/misc
543 codeman 851 updated all core files with new GPL notice and copyright statement.
544 codeman 848
545 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
546     src/GLIUtility.py:
547     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
548     a snapshot in /mnt/cdrom/snapshots/
549 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
550 agaffney 846 change calls to extra package special case functions to 'self.blah'
551 agaffney 839
552 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
553     src/ArchTemplate: changed "voodoo".
554 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
555     normal emerge sync fails.
556 codeman 836 removed get_sources_from_cd because it is obsolete.
557     add special cases to install_packages. remove fatal exception on package
558     install failure b/c the box will still be bootable.
559 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
560     handled in the FEs.
561 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
562     awaiting testing.
563 codeman 830
564 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
565     src/GLIStorageDevice.py:
566     global try/except block around fs resizable detection code
567 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
568     install-failed cleanup function
569 agaffney 826
570 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
571     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
572    
573 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
574 codeman 814 GLIGenDialog:
575     add drive choices for loaded configs.
576     force snapshot for dynamic_stage3
577     init the snapshoturi input to the cd snapshot if not already selected.
578     if dynamic_stage3, skip the make.conf step.
579     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
580     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
581 codeman 812
582 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
583     src/GLIArchitectureTemplate.py:
584     manually call MAKEDEV in stage3-dynamic code
585 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
586 agaffney 815 src/GLIUtility.py:
587     add beginning of validate_uri() function
588 agaffney 817 add file:/// support to validate_uri()
589 agaffney 822 single quotes when setting livecd password
590 agaffney 811
591 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
592     src/GLIGenDialog.py:
593     change getmountpoint() to get_mountpoint()
594 agaffney 808 src/misc/updategtkfe:
595     committed script to automatically download latest snapshot and run gtkfe
596 agaffney 809 src/templates/x86ArchitectureTemplate.py:
597     fix _configure_lilo_add_windows() for IP -> GLISD stuff
598 agaffney 810 src/GLIArchitectureTemplate.py:
599     give tmp_minor an initial value in mount_local_partitions so that the value
600     remain from the previous drive
601 agaffney 807
602 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
603     src/templates/x86ArchitectureTemplate.py:
604     Fix _configure_lilo() for IP using GLISD stuff
605 agaffney 806 src/GLIArchitectureTemplate.py:
606     install_cron_daemon() treats "none" specially
607 agaffney 805
608 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
609     old patch from Steven Mertens to resolve bug #96642
610 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
611     strings renamed for global use if necessary.
612 codeman 803 fix all three parts of bug 102291
613 codeman 804 disable set_etc_portage until fully-written.
614 codeman 801
615 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
616     src/GLIClientController.py:
617     lower-case http/ftp proxy envvars
618    
619 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
620     src/GLIClientController.py:
621     log end of pre_install steps to aid in debugging
622 agaffney 798 src/templates/x86ArchitectureTemplate.py:
623     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
624 agaffney 797
625 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
626     src/GLIArchitectureTemplate.py
627     check to make sure that the device node we're wait for to exist isn't of
628     type 'free'
629    
630 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
631     src/GLIGenDialog.py:
632     convert install_packages to list in set_extra_packages()
633 agaffney 793 check return code of checklist() call in "Manual" section
634 agaffney 794 *actually* fix the first problem
635 agaffney 792
636 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
637     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
638     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
639    
640 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
641     src/GLIArchitectureTemplate.py:
642     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
643    
644 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
645     Add CDATA support to SimpleXMLParser and add utility functions for it.
646    
647 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
648     src/GLIArchitectureTemplate.py:
649     Fix case where vixie-cron is specified as a full package atom, as we still
650     don't want to run 'crontab /etc/crontab' for it.
651    
652 agaffney 788 *GLI-0.1 (3 Aug 2005)
653    
654 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
655     add scp to list of is_uri() so GenDialog doesn't complain.
656 codeman 769 fixed livecd-kernel bug in bootloader code.
657 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
658     change bootloader to allow for both initrd and initramfs.
659 codeman 777 fix IP for dynamic_stage3.
660 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
661 codeman 777
662 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
663     Added full scp:// URI support to get_uri() in GLIUtility
664 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
665     Remove print statement from scp:// code.
666 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
667 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
668 agaffney 770 Check to make sure pkg can be split on / and some debugging code
669 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
670 codeman 777 SimpleXMLParser handles True/False/None correctly now
671 agaffney 778 Comment out above fix
672 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
673 codeman 764
674 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
675     Removed a FIXME in the GLIClientConfiguration that is no
676     longer needed.
677    
678 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
679     Default to x86 in ClientConfig
680 agaffney 761 Typo in build-a-stage3 code.
681     Remove MAKEDEV call in build-a-stage3 postscript.
682 agaffney 760
683 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
684     Rewrote init of IP for gli-d. Other GenDialog updates.
685     allow network_type to be None in CConfig.
686    
687 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
688     Add _dynamic_stage3 option to IP.
689     Add check for that option to dynamic stage3 code in ArchTemplate.
690 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
691     Fix serialization of dns-servers in ClientConfig.
692 agaffney 755
693 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
694     changed default values of cron/logger in IP.
695     moved GenDialog IP init out to the individual files. gli-dialog's version
696     will change quite a bit.
697    
698 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
699     added ppcArchTemplate. blank now. working on yaboot.
700 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
701     skeleton implementation of _configure_yaboot.
702     small fixes to other templates.
703 codeman 750
704 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
705     GenDialog updates. changed comment in IP.
706    
707 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
708 robbat2 743 src/GLIInstallProfile.py:
709     Fix codeman's screwup of changing the service seperator to ',' in the parser
710     without changing it in the serialization code! Also document this in a
711     comment so you find it easier. Everybody needs to make sure they update
712     their install profiles!
713    
714     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
715 robbat2 742 src/GLIArchitectureTemplate.py:
716     Fix casting of list to string and concat of None with string, as well as
717     commented prototype of checking that mounting actually worked (found a case
718     where mount can return success, but the mount won't be done).
719    
720     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
721 robbat2 740 src/templates/x86ArchitectureTemplate.py:
722 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
723     checking for the device, and sleeping 1 second each time.
724    
725     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
726     src/templates/x86ArchitectureTemplate.py:
727 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
728     bootloader works again. Also rename _install_{grub,lilo} to
729     _configure_{grub,lilo} since they don't install the loaders anymore
730     themselves.
731    
732 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
733     fix global USE flags to not include the arch types at the end.
734     updates to GenDialog and gli-d.
735    
736 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
737     fixing bootloader code for no initrd and initrd->initramfs naming change.
738    
739 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
740     Proper comments and parameters to GLIException in install_mta()
741 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
742 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
743     list_tarball_from_mirror() to eliminate blank last item.
744 agaffney 733
745 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
746     Added stage3 generation code.
747    
748 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
749     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
750     Mild changes to GenDialog.
751    
752 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
753     Remove separate install step configure_rc_conf() since it's handled by
754     update_config_files()
755     Make a copy of newvalues in _edit_config() so quotes aren't added when the
756     function is called twice on the same file.
757    
758 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
759     Missing \ in sed in _get_packages_to_emerge()
760 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
761 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
762     _get_packages_to_emerge()
763 agaffney 726
764 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
765     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
766     in the dialog.py gauge code.
767    
768 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
769     Add code to update_config_files() to go through etc_files and update stuff.
770 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
771 agaffney 724 Only use float() in partition xml parsing code if type == "free"
772 agaffney 720
773 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
774     finished almost all internationalization of GenDialog.
775 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
776 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
777 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
778 codeman 718
779 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
780     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
781    
782 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
783     fix extra entry in list_mirrors()
784     beginning internationalization runthrough.
785    
786 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
787     added dialog.py to /src temporarily until it gets accepted upstream.
788 codeman 714 fix for unused value in form in dialog.py and changed heights.
789     fix GenDialog forms.
790 codeman 713
791 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
792     Changed hostname/domainname for new baselayout.
793     Changed _add_to_runlevel errors to logs.
794     Updated TODO list to show status of GenDialog
795     More updates to GenDialog including two checklists that probably won't work.
796 codeman 711 update IP to use comma-separated list instead of space separated for services.
797 codeman 710
798 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
799     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
800     GenDialog as it gets closer to completion.
801    
802 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
803 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
804     instead of int() in add_partition_device_partition() for minor (closes 96804)
805 agaffney 704
806     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
807     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
808     instead of 'interfaces[interface][1]' since DHCP uses that field for its
809     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
810    
811 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
812 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
813 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
814 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
815 agaffney 704 Fix undefined variable 'output' issue in spawn().
816 agaffney 697
817 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
818     More updates to GenDialog and gli-d.
819    
820 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
821     Modify list_mirrors() to return a list of mirror URL/name pairs.
822    
823 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
824     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
825     get subarch.
826    
827 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
828     Backend partitioning will create disklabel is none exists. Installprofile
829 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
830     mount_local_partitions() to remember device along with minor in the
831 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
832     add else block to log unsupported netmount types to mount_network_shares()
833 agaffney 691
834 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
835     src/GLIArchitectureTemplate.py:
836 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
837     src/fe/cli/clife.py:
838     Logging system.
839     src/GLIUtility.py, src/GLIStorageDevice.py:
840     Add comments about re-writes needed for boxes without sysfs.
841    
842     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
843     src/GLIArchitectureTemplate.py:
844 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
845     'make dep' call for custom compile. build_mode support for prepare-only and
846     none types completed. custom compile function chains shell functions in
847     spawned script, to allow for catching all errors.
848    
849 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
850     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
851     and GenDialog. other gendialog updates as well. kernel updates untested.
852    
853 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
854     src/GLIInstallProfile.py:
855     Change structure of etc-portage stuff. The serialization was broken before my
856     last commit, and I am the only person that's ever used it. The new schema is
857     as follows:
858     <etc-portage>
859     <file name="package.mask"/>
860     <file name="package.unmask">
861     <entry atom="sys-kernel/openmosix-sources"/>
862     </file>
863     <file name="package.use">
864     <entry atom="sys-libs/db">
865     -java
866     </entry>
867     <entry atom="dev-libs/cyrus-sasl">
868     -ldap
869     </entry>
870     </file>
871     </etc-portage>
872    
873    
874 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
875     src/GLIInstallProfile.py:
876     Add new entry for gli-profile/kernel-build-method item. Add missing
877     serialize_etc_portage (temporary). Make serialize_make_conf always print the
878     keys in the same order.
879    
880 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
881     src/GLIArchitectureTemplate.py:
882 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
883     was repeatedly appended to make.conf.
884    
885     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
886     src/GLIArchitectureTemplate.py:
887 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
888     successfully mounted swap device for using swapoff. Add proper error checking
889     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
890     'file'. Clean up some redundant code (thanks to pychecker).'
891    
892 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
893 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
894 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
895     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
896 agaffney 668
897 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
898     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
899     in add_network_interface.
900    
901 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
902     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
903     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
904 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
905     prepare_chroot.
906 robbat2 664
907 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
908     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
909     +src/fe/installer-gtk:
910     Add new automated CLI frontend. Add scripts that are the intended means to
911     use each frontend.
912    
913 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
914 robbat2 663 src/GLIClientController.py:
915     Add null type to network config, for cases where the interface is already up
916     and should not be touched (netboot for example).
917    
918     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
919 robbat2 652 src/GLIArchitectureTemplate.py:
920 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
921     string!. Try to use binary packages if available by default.
922    
923     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
924     src/GLIArchitectureTemplate.py:
925 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
926     actually exists before we try to add it. set_services phase must take place
927     after the package installation, otherwise the init scripts might not exist.
928     Find the correct init script for the cron and logging daemons, and add that
929     instead of the package atom.
930    
931     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
932     src/GLIArchitectureTemplate.py:
933 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
934     usage of 'file' to 'contents' for the variable name, as it shadows
935     __builtin__.file.
936    
937     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
938     src/GLIArchitectureTemplate.py:
939 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
940     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
941     for 'none' kernel config for build_kernel phase. Put kernel_script in
942     /var/tmp instead of /root for build_kernel phase.
943    
944 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
945     Rename mta variables to match syslog/cron variables.
946    
947 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
948 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
949     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
950     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
951     src/templates/.cvsignore, src/tests/.cvsignore:
952     Refactor partition formatting again to include error checking. Allow 'none'
953     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
954    
955     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
956 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
957     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
958     only have a single spawn call.
959    
960 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
961     refixed samyron's fix of set_architecture_template.
962    
963 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
964     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
965     be executable.
966    
967 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
968     Fixed one of the FIXME's in the ClientConfiguration. There is now some
969     error checking when you call set_architecture_template.
970    
971 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
972     moved the mkfsopts input to the partition options menu instead of the during
973     the creation process. updated GenDialog to say it supports reiserfs v3.
974    
975 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
976     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
977     Complete support for 'mkfsopts' parameter in main system and dialogfe.
978     Add support for other partition types to dialogfe.
979     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
980     avoid integer overflows and wraparounds.
981    
982 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
983     Removed start/end from XML output and added mkfsopts to partitioning info.
984 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
985 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
986 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
987     partitioning. Fix free space overwriting bug. Remove a few unused functions
988 agaffney 640 from rewrite. Fix call to get_partition_at()
989 agaffney 631
990 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
991     Updates to GenDialog and dialogfe.
992    
993 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
995 agaffney 627
996 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
997     more GenDialog updates to partitioning.
998    
999 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1000     Indenting issue in GLISD/get_ordered_partition_list.
1001     updates to GenDialog partitioning and added default UTC for timezone in IP.
1002    
1003 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1004     Added GLISD.get_model()
1005    
1006 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1007     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1008     More updates to GenDialog :)
1009    
1010 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1011     Added get_interface_realname() function.
1012    
1013 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1014     Added auto-save of CConfig and copying to new /root after install.
1015     yet even more GenDialog updates.
1016    
1017 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1018     removed print statement from GLISD. more updates to GenDialog.
1019    
1020 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1021 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1022 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1023 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1024     places in GLIClientConfiguration.
1025 agaffney 608
1026 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1027     Fix mount_local_partitions(), configure_fstab(), and
1028 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1029 agaffney 601 A few more fixes for templates/x86Archtemplate
1030 agaffney 599
1031 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1032     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1033     a work in progress.
1034    
1035 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1036     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1037     directly. GLISD can now handle data imported from XML.
1038    
1039 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1040     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1041     handle blank (no disklabel) disks.
1042    
1043 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1044     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1045     up, documented, and separated out serialization and grouped all sections.
1046    
1047 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1048     Reorganization of ClientConfiguration and gutting of unused functions.
1049     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1050    
1051 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1052     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1053    
1054 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1055 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1056 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1057     copies it into /mnt/gentoo/root
1058 agaffney 588
1059 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1060     Moved URI parsing into new function parse_uri()
1061    
1062 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063     Added XMLParser module.
1064    
1065 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1066     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1067 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1068 agaffney 580
1069 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1070     Updated finishing_cleanup for new unmounting method from agaffney.
1071    
1072 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1073 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1074 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1075     unicode support to is_realstring().
1076 agaffney 575
1077 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1078 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1079 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1080 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1081     instead of --nocolor.
1082 agaffney 571
1083 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1084     Added GLIGenDialog.py to make a generic class for the dialog functions that
1085 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1086     date changes. 2004->2005.
1087 codeman 566
1088 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1089     Removed 'quiet=True' from spawn() calls
1090    
1091 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1092     Updated GLIUtility with patches from chotchki. Also added documentation
1093    
1094 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1095     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1096     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1097     from bug #89683, mostly touchups.
1098    
1099 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100     GLIStorageDevice cleanup patch from bug #91761
1101    
1102 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1103     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1104 agaffney 553 _edit_config(). Error logging casts 'error' to str
1105 agaffney 551
1106 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1107 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1108     code to CC to handle exceptions *not* thrown by the installer itself.
1109 agaffney 548
1110 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1111     get_max_mb_for_resize() returns -1 if not self.resizeable
1112    
1113     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1114 agaffney 539 More dirty rsync hacks :-/
1115    
1116 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1117     Patches from chotchki (bug #90325) to improve CC networking. untested.
1118    
1119 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1120 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1121 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1122 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1123 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1124 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1125     _get_packages_to_emerge()
1126 agaffney 528
1127 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1128     Added group-adding code to set_users in ArchTemplate
1129    
1130 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1131     Added post-install script code
1132    
1133 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1134     Fixed encapsulation issues in GLIClientController (bug #90141)
1135    
1136 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1137     Update resizing code in GLIStorageDevice
1138    
1139 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1140     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1141    
1142 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1143     Reverted change to ArchTemplate and added support for commented line in old
1144     code.
1145    
1146 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1147     Changed _edit_config() to modify value in-place instead of commenting out and
1148     adding the new value to the end of the file.
1149    
1150 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1151     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1152     Also updated TODO list.
1153    
1154 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1155     Use blackace's one-liner to add comments for all function for use with
1156     pythondoc.
1157    
1158 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1159     Moved 'end >= device_sectors' check out of loop to check for next partition's
1160 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1161 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1162     point of logical is now adjusted along with start.
1163 agaffney 503
1164 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1165 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1166 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1167     key in partition information due to new partition code leaving them as float.
1168 agaffney 497
1169 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1170 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1171 agaffney 494
1172 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1174    
1175     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1176 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1177    
1178 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1180     sed to properly strip out junk.
1181 agaffney 481
1182 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1183 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1184 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1185 codeman 475
1186 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1187     Fixed indent problem in GLICController
1188    
1189 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1190     Check for disklabel type "loop" and use the device name without a minor.
1191    
1192 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1193     Remove /tmp/compile_output.log and /var/log/install.log when install is
1194 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1195 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1196 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1197 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1198 agaffney 453
1199 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1200 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1201     when unpacking tarball.
1202 agaffney 451
1203 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1204 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1205     filesystem_tools code.
1206 codeman 443
1207 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1208     Changed the print statements to logging in the partitioning BE code.
1209     the logger may need to be imported to the x86archtemplate. unknown yet.
1210 codeman 432 Added the finishing_cleanup function.
1211 codeman 433 added a fix to the logger from BenUrban
1212 codeman 427
1213 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1214     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1215     URIs. The blank uri check has been commented out.
1216 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1217 codeman 422
1218 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1219     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1220    
1221 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1222     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1223 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1224 agaffney 415
1225 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1226     small changes to setup_network_post. moved adding to runlevel of net.x to
1227     after the device gets symlinked. added domainname runlevel command.
1228    
1229 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1231 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1232     spawn() call in livecd-kernel code to pass environment variables.
1233 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1234     the install profile if available.
1235 agaffney 402
1236     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1238     to handle installing the livecd kernel into the new system.
1239    
1240 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1241     should emerge hotplug and coldplug before adding them to runlevel.
1242    
1243 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1244 codeman 395 took chroot out of grub_install command.
1245    
1246     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1247     Changed chroot wrapper code in spawn() to write the wrapper the python way
1248     instead of the bash way to avoid quote conflicts. Added
1249 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1250 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1251     as it breaks the piping.
1252 codeman 390
1253 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1254     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1255    
1256 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1257     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1258 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1259 agaffney 389 GLIInstallProfile.
1260 agaffney 385
1261 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1262 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1263     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1264     into /mnt/gentoo in prepare_chroot()
1265 agaffney 379
1266 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1267     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1268 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1269     to start/end sectors
1270 agaffney 375
1271     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1272 agaffney 374 Add 2>&1 to cmd in spawn()
1273    
1274 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1275     Modified GLIUtility.exitsuccess() to work with return value from
1276 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1277     creates wrapper script for commands run inside chroot so multiple commands
1278 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1279     for the generated script from spawn()
1280 agaffney 369
1281 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1282     Removed default values for stage tarball URI and portage tree URI from
1283     InstallProfile. These should be set by the FEs. also added services step to
1284     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1285     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1286    
1287 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1288     Small fix for setting the default gateway. Also added feature to dialogfe.
1289    
1290 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1291     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1292    
1293 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1294 codeman 346 Fixed a bunch of true -> True typos. lots of em
1295 codeman 347 only write new resolv.conf if there are dns servers listed.
1296 codeman 345
1297 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298     Commented out 'display_on_tty8=True' in start_portmap()
1299    
1300 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1301     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1302    
1303 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1305     lang parameter to __init__()
1306 codeman 331
1307     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1308     updates to TODO list.
1309 esammer 4
1310 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1312     'emerge -p blah'
1313 agaffney 322
1314 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1315 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1316     added quickpkg to TODO list
1317 codeman 319
1318 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1319     Changed the raising of 'warning' exceptions to a simple log of the error
1320     so that the installer can continue.
1321    
1322 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1323     Some big changes. First, changed most output to display_on_tty8.
1324     Second, added log lines to all templates. Some smaller fixes such as typos.
1325     Also did some cleanups of old commented lines.
1326    
1327 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1329 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1330 agaffney 310
1331 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1332     more updates to TODO list. hopefully we'll soon start removing items instead
1333     of adding them.
1334    
1335 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1336     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1337    
1338 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1339 codeman 295 updated TODO list. (again)
1340 codeman 293
1341 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1342     changed output of portmap start to display_on_tty8.
1343     fixed bootloader for udev and multiple kernels
1344 codeman 288 fixed custom kernel config (again)
1345 codeman 286
1346 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1347     changed default value of CC._enable_ssh to True because this is smart.
1348 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1349 codeman 281
1350 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1351     partition() now waits until after it checks for partition flags before delete
1352     the partitions :P
1353    
1354 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1355 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1356 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1357     blank.
1358 agaffney 271
1359 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1360     Various fixes related to the add_users function. Still not yet finished.
1361 codeman 269 Added things to the TODO list. Lets start using that!
1362 codeman 268
1363 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1364     Added code to x86Template to format newly created partitions. Also added
1365 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1366 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1367     mounting code.
1368 agaffney 264
1369 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1370     Took out unnecessary setting of random livecd root password. the cd already
1371     sets it randomly.
1372    
1373 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1374     Took out an unneeded step from CC's run()
1375    
1376 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1377     Attempt at detecting and adding windows partitions to lilo.
1378    
1379 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1380 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1381     partition. fixed misc exit_status => exitstatus typo.
1382 codeman 235
1383 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1385     resizing ntfs and ext2/3.
1386 agaffney 230
1387 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1388     Fixed partition() in x86Template so that it scans through logicals and deletes
1389 agaffney 229 before deleting containing extended partition. Also clears partition table to
1390     be safe before third pass.
1391 agaffney 228
1392 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1393     Added mount_network_shares. not able to test it from this computer.
1394     will test when i get back to school.
1395     also added start_portmap to the client_controller as an always-do.
1396     agaffney says this is needed for NFS mounts to work.
1397    
1398 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1399     Partial rewrite of partitioning code in x86Template. No longer shells out to
1400     parted to perform actions, now uses all pyparted calls. Code "works" in a
1401     test, but still needs lots of TLC. Also modified tests/install.py to work
1402     with x86Template and GLIClientConfiguration.
1403    
1404 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1405     Initial move of partitioning code from ArchTemplate to x86Template.
1406 agaffney 220
1407 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1408 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1409 codeman 222
1410     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1411 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1412     Test Install ran very well (skipping partitioning).
1413    
1414 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1415 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1416 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1417     some may still have eluded me.
1418 codeman 215
1419     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1420 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1421     Just finished mount_local_partitions in GLIArchitectureTemplate
1422    
1423 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1424     Added get_num_sectors() to GLIStorageDevice.
1425    
1426     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1427 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1428 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1429     from GLIInstallProfile.
1430 agaffney 205
1431 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1432     GLIStorageDevice returns "unknown" instead of "" for get_type()
1433    
1434 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1435 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1436     actually work. Commented out resizability checking code for speed.
1437 agaffney 183
1438 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1439     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1440     GLIStorageDevice at the suggestion of plors
1441    
1442 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1443     Added a function to GLIUtility to pull a value from a make.conf-style config
1444 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1445 agaffney 162
1446 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1447 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1448     network mounts from partition data structure in GLIInstallProfile
1449 agaffney 161
1450 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1451     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1452     can be resized.
1453    
1454 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1455     Added some of the final functions to GLIInstallTemplate.
1456     Yes this project is still active despite rare use of the Changelog!
1457    
1458 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1459     Added the GLIPartitionTools.py file. This is a temporary insertion of
1460     partitioning tools that will eventually go into their own package.
1461    
1462 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1463     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1464     for the program). Added __init__(install_profile, client_configuration) to
1465     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1466     to avoid constantly passing stuff every time we call a method.
1467    
1468 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1469    
1470     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1471     files without messing up all the other stuff in them. This will be used for making
1472     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1473    
1474 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1475    
1476     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1477     have a few basic things. I added two private methods. One is _depends(). This
1478     will be used for dependency checking (ie. unpacking a tarball requires that
1479     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1480     same syntax as os.system(), however, instead of being run in the liveCD
1481     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1482     isolated the code. Hope to work more this week to get this class formed...
1483    
1484 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1485    
1486     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1487     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1488     to allow for easier modification (mutable, rather than immutable objects). Updated
1489     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1490     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1491     Added initial unit test code.
1492    
1493 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1494    
1495     Added initial changelog. Setting up the basic structure of the CVS repository
1496     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1497     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20