/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1183 - (hide annotations) (download)
Fri Dec 23 22:39:29 2005 UTC (8 years, 10 months ago) by agaffney
File size: 62661 byte(s)
flipped around a few function args

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1183 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.543 2005/12/23 22:39:29 agaffney Exp $
5 codeman 773
6 agaffney 1033 *GLI-0.3 (27 Oct 2005)
7 agaffney 791
8 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     initial commit
11 agaffney 1182 move some of portage function from GLIAT
12 agaffney 1183 flipped around a few function args
13 agaffney 1182 src/GLIArchitectureTemplate.py:
14     revamp install_packages() for new GLIPortage
15 agaffney 1181
16 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
17     src/GLIArchitectureTemplate.py:
18     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
19    
20 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
21     src/net/server/gliserv.py:
22     wrap generated code in a class to isolate it a bit better
23     302 redirects work
24 agaffney 1179 don't use cgi.escape() for <% %>
25 agaffney 1177 src/net/server/html/webgli/*:
26     load/save profile
27 agaffney 1178 src/GLIUtility.py:
28     change /sbin/lspci to just lspci
29 agaffney 1176
30 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
31     src/GLIClientController.py:
32     change ordering of statements in CC run() while loop to not go past the end
33     of the array
34 agaffney 1173 src/GLIArchitectureTemplate.py:
35     removed redundant bind mounts
36 agaffney 1172
37 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
38     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
39 codeman 1171 added a diagram by blackace from last night.
40     added the glossary in RTF format.
41 codeman 1170
42 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
43     x86AT: separated out emerge/configure from running of bootloader
44     added MBR drive support to lilo.
45     these changes will likely not work.
46     AT: added setup_and_run_bootloader step.
47    
48 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
49     src/net/server/gliserv.py:
50     call generated code in a function
51     src/net/server/html/webgli/*:
52     include top/bottom
53 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
54     src/GLIClientCongifuration.py:
55     install mode magic
56 agaffney 1163
57 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
58     src/GLIClientController.py:
59     use GLIException when there's an import problem
60 agaffney 1159 added debug code to show install_steps
61 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
62     add . to import path
63 agaffney 1160 proper path this time: ../../templates
64 agaffney 1162 src/GLIArchitectureTemplate.py:
65     add _portage_best_version() function
66 agaffney 1156
67 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
68     added initial glossary and gimli diagram to the docs directory.
69 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
70 codeman 1154
71 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
72     src/net/server/html/webgli/:
73     converted globaluse, localuse, networkmounts, portagetree, and stageselection
74 agaffney 1150 moved saveclientconfig stuff into clientconfig
75 agaffney 1151 moved saveconfigfiles into config files
76     converted etc_portage and makedotconf
77 agaffney 1152 converted bootloader and kernel
78 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
79 agaffney 1151 src/net/server/gliserv.py:
80     proper 404 handling for .pyhtml extension
81     HTML escape <% %> stuff
82 agaffney 1152 work around python's sucky regexes
83 agaffney 1153 src/GLIInstallProfile.py:
84     allow set_{rsync,ftp,http}_proxy() to accept empty values
85 agaffney 1149
86 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
87     src/net/server/gliserv.py:
88 agaffney 1148 initial commit of Legolas templating engine
89     302 redirects
90 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
91     minor changes for new code
92     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
93     initial commit of the conversion from the monolithic WebGLIHandler.py to the
94 agaffney 1148 one file per path Legolas goodness
95     partitioning[2-4] done
96 agaffney 1147
97 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
98     webgli: dhcp options in CC and post-install.
99     updated comparison chart.
100 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
101 codeman 1145
102 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
103     webgli_template.html: valign=top on left side.
104     webgli: fix bootloader boot_device. now working.
105 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
106 agaffney 1138
107 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
108     src/net/server/webgli_template.html:
109     increase padding for content cell to 7px and add colspan=2
110    
111 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
112     webgli: added graphic bar on top
113     webgli: added hover effects on the links on the left
114     webgli: re-rendered header_bg.png to stretch without artifacts
115    
116 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
117     webgli: make.conf disabling fixes for dynamic_stage3
118     fixed portage snapshot browse popup
119     all changes tested.
120     webgli: add debug mode to CC screen. the screen still needs lots of work.
121    
122 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
123     added debug mode question to gli-dialog
124     added CC proxies to CC networking for gli-dialog
125 codeman 1125 webgli: fixed skip CC networking if connection active
126     webgli: portage snapshot defaults to CD
127     webgli: bootloader mbr drive selection
128     webgli: USE flags unselectable if dynamic_stage3
129     webgli: manual extra packages and save button.
130    
131 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
132     src/GLIUtility.py:
133     change ping count to 2
134 agaffney 1121 docs/comparison.html
135     initial commit
136 agaffney 1119
137 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
138     src/templates/x86ArchitectureTemplate.py:
139     fix map() issue with grub code
140     replace kernel_names and initrd_names loops with one-liners
141    
142 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
143     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
144 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
145 codeman 1106 failure cleanup now an option for gli-dialog.
146 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
147     added comparison list and updated TODO!
148 codeman 1102
149 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
150     src/GLIArchitectureTemplate.py:
151     fix to stage1() debug code
152 agaffney 1098 fix to stage2() debug code
153 agaffney 1097
154 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
155     some more bootloader code fixes. forgot boot_device != mbr_device.
156 agaffney 1097
157     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
158     src/GLIStorageDevice.py:
159     fix to unallocated space merging when last one is after part 4
160 codeman 1096
161 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
162     src/GLIArchitectureTemplate.py:
163     small fix to debugging code in copy_pkg_to_chroot()
164    
165 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
166 codeman 1096 more bugfixes with bootloader code
167     gli-dialog side appears to work
168 codeman 1086
169 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
170 codeman 1080 initial adding of boot_device to backend.
171     initial boot_device support added to gli-dialog.
172 codeman 1096 some fixes of my poor coding
173 codeman 1077
174 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
175 codeman 1075 converted gli-dialog to use the install_package_list.
176     gtkfe has already been converted by AllanonJL
177 codeman 1076 new way working in gli-dialog now and added to webgli.
178 codeman 1077 added set/get_boot_device() to IP
179 codeman 1075
180 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
181     get_install_package_list added to InstallProfile. This can be used by the FEs
182    
183 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
184     src/templates/x86ArchitectureTemplate.py:
185     call ls with '-1 --color=no'
186    
187 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
188 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
189 codeman 1069
190 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
191     src/GLIArchitectureTemplate.py:
192     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
193     confused
194    
195 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
196     removed protocols from rc.conf screens
197     finished initial rc.conf and make.conf in webgli
198    
199 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
200     src/net/server/gliserv.py:
201     add -h option to usage()
202 agaffney 1063 show time and request URI in debug mode
203 agaffney 1064 show client IP in debug mode
204 agaffney 1065 just use IP instead of trying to do a reverse lookup
205 agaffney 1062
206 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
207     src/net/server/gliserv.py:
208     'classier' 401 message
209     proper commandline parsing
210     help via -h
211     user/pass can be specificed via commandline option
212    
213 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214 agaffney 1057 src/net/server/gliserv.py:
215 agaffney 1059 basic HTTP auth
216    
217     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
218     src/net/server/gliserv.py:
219 agaffney 1057 dynamic module reloading (yipee!)
220 agaffney 1058 send 'Last-Modified' header for real files
221     respond to HEAD with just headers
222 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
223     icons for drives
224    
225 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
226     src/net/server/handlers/WebGLIHandler.py:
227     initial 'pretty' partition table display support
228 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
229 agaffney 1044 radio buttons and pretty display work together
230     META redirect instead of javascript
231     pretty display stretches across entire screen
232 agaffney 1046 'Recommended layout' and 'Clear drive' functions
233 agaffney 1047 properly catch exceptions from do_recommended()
234 agaffney 1049 src/GLIArchitectureTemplate.py:
235     replace preinst, copy, postinst, rm steps with qmerge
236 agaffney 1050 whoops...that shouldn't have been commented out
237 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
238 agaffney 1052 more generic of symlink crappiness
239 agaffney 1053 new copy_pkg_to_chroot() actually works now
240 agaffney 1042
241 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
242     src/GLIStorageDevice.py:
243     initial generic disk support
244 agaffney 1040 fixes for add_partition() code
245 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
246     added support for creating generic disks
247 agaffney 1040 add new partition working
248 agaffney 1041 save and delete partitions
249 agaffney 1037
250 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
251     webgli: Partitioning making progress.
252    
253 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
254     src/GLIArchitectureTemplate.py:
255     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
256     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
257     dir) and works around /etc/gconf symlink problem
258    
259 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
260     webgli: lots of updates. preliminary partitioning. extra packages works.
261    
262 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
263     src/net/server/gliserv.py:
264     httpd now supports HTTPS and falls back to HTTP if not available
265 agaffney 1030 make fallback actually work
266 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
267     SecureSocketServer is now threaded
268    
269 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
270     src/net/client/gliclient.py:
271     try to use HTTPS for XMLRPC first and fallback to HTTP
272 agaffney 1028 pretend mode
273 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
274     HTTPS XMLRPC goodness from samyron
275 agaffney 1028 pass name of certificate
276 agaffney 1026
277 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
278     wegli: daemons and services screens done.
279    
280 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
281     webgli: networking and users screens
282     added return_redirect to handler.py
283 codeman 1022 loading and saving install/client profiles works for webgli now
284     Review also done
285 agaffney 1033
286     *GLI-0.2 (27 Oct 2005)
287 codeman 1025
288 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
289     src/templates/x86ArchitectureTemplate.py:
290     properly check for bootloader emerge exist status with exitsuccess()
291 agaffney 1010 log output of grub install command
292 agaffney 1011 add --batch --no-floppy to grub command
293 agaffney 1013 grubinstallstring only gets logged if debug is on
294 agaffney 1012 src/GLIUtility.py:
295     update progress bar to 100% when process finishes
296 agaffney 1009
297 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
298     src/GLIClientController.py:
299     added debugging code for the interaction between the 2 threads via Event()
300 agaffney 1003 src/GLIUtility.py:
301     doubled the buffer size in spawn()
302 agaffney 1004 bump buffer size up to 16384
303     only report progress in 5% increments
304 agaffney 1005 src/GLIArchitectureTemplate.py:
305     kernelpkgs.txt support code
306 agaffney 1006 above disabled because it sucks
307 agaffney 1007 added add_pkg_to_world()
308 agaffney 1002
309 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
310     src/GLIArchitectureTemplate.py:
311     use tar | tar to copy files in copy_pkg_to_chroot()
312     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
313    
314 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
315     DEBUGGING ADDED TO AT. verbose field added to CConfig.
316    
317 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
318     src/net/server/gliserv.py:
319     / maps to index.html
320     look for actual files in html/
321     src/net/html:
322     new template
323 agaffney 998 src/GLIUtility.py:
324     added parse_vdb_contents()
325     src/GLIArchitectureTemplate.py:
326     added copy_pkg_to_chroot()
327     added debug code to dynamic-stage3
328 agaffney 999 switch dynamic-stage3 to new method
329     lots of bug fixes from adding debug code
330 agaffney 993
331 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
332     webgli initial bootloader support + changed make.conf.
333 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
334 codeman 983
335 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
336 agaffney 982 src/GLIUtility.py:
337 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
338 agaffney 981 add unpack progress to portage snapshot
339 agaffney 982 use read() instead of readlines() in spawn()
340     only update progress bar for whole percents
341 agaffney 980
342 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
343     src/templates/x86ArchitectureTemplate.py:
344     change call to 'grub' to use GLIUtility.exitsuccess()
345 agaffney 977 add definition of 'build_mode' in _configure_lilo()
346 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
347     fix so subshell is called in root shell
348    
349 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
350     src/net/server/handlers/WebGLIHandler.py:
351     stage screen launches URI browser in sized window with various properties set
352    
353 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
354     src/misc/updategtkfe:
355     updated to actually work
356 agaffney 972 remove previous snapshot and extracted dir before downloading
357 agaffney 973 src/misc/updateglid:
358     updated to actually work
359 agaffney 974 src/templates/x86ArchitectureTemplate.py:
360     fixed bug where grub code was looking for 'root+root+file_name2'
361 agaffney 971
362 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
363     src/net/server/handlers/WebGLIHandler.py:
364     URI browser
365 agaffney 970 added mirror selection
366 agaffney 969 src/GLIUtility.py:
367     ls via ssh strips off ending *
368 agaffney 968
369 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
370     more updates to webgli. stage selection.
371    
372 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
373     updated webgli with preliminary Network Mounts support.
374    
375 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
376     GenDialog: string formatting and yes/no label fixes.
377     added WebGLI template for gliserv.py
378     added WebGLIHandler as well as a definition for it in gliserv.py
379     updates to the webgli files even though they won't be there for long.
380 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
381     goes public.
382 codeman 952
383 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
384     src/net/server/gliserv.py:
385     override dict to not be so anal
386 agaffney 949 main server now loads separate module to handle requests
387 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
388 agaffney 949 split out profile URLs into separate handler function
389 agaffney 950 move handlers into subdirectory
390 agaffney 956 add Welcome and Clients handlers
391 agaffney 949
392 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
393     src/GLIUtility.py:
394     raise exception if password prompt received twice
395    
396 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
397 agaffney 944 src/GLIUtility.py:
398 agaffney 943 removed rot13ify()
399    
400     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
401 agaffney 935 src/net/server/gliserv.py:
402     allow for param to be passed multiple times in GET
403 agaffney 940 no XMLRPC functions return None
404 agaffney 941 modify POST request parsing to only create a list if needed
405 agaffney 942 fix GET request parsing so the list creation for multiple values works
406 agaffney 940 src/net/client/gliclient.py:
407     various typo and type mismatch fixes
408     exit after exception
409 agaffney 935
410 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
411     src/net/client/gliclient.py:
412     initial commit
413 agaffney 934 pass MAC to XMLRPC functions
414     src/net/server/GLIServerProfile.py:
415     rename GLIClientsProfiles to GLIServerProfile
416 agaffney 933
417 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
418     src/net/server/gliserv.py:
419     now handles POST requests
420     move majority of request handling code to common_handler() to reduce code
421     duplication
422 agaffney 931 profile loading
423     client reg via XMLRPC goes into SharedInfo()
424     /showclients redesign
425     template fixes
426 agaffney 932 allow handler functions to add/change headers
427     save profile
428 agaffney 930
429 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
430     src/net/server/GLIClientsProfiles.py:
431     initial commit
432     src/net/server/template.html:
433     initial commit
434     src/net/server/gliserv.py:
435     add template mojo
436    
437 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
438     src/net/server/gliserv.py:
439     XMLRPC mojo
440    
441 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
442     src/GLIArchitectureTemplate.py:
443     add code in _edit_config() to comment line where variable is defined
444     previously
445 agaffney 920 insert new line under previous definition of variable if it exists
446 agaffney 921 small _edit_config() cleanup
447 agaffney 923 src/GLIStorageDevice.py:
448     add clear_partitions() function
449 agaffney 924 new sizes for recommended partition layout
450 agaffney 925 automatically calculate swap size for recommended layout
451 agaffney 919
452 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
453     src/templates/x86ArchitectureTemplate.py:
454     fat16 mojo
455    
456 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
457     src/GLIStorageDevice.py:
458     prevent do_recommended() from being run twice
459 agaffney 916 rewrite do_recommended() to be more robust
460 agaffney 917 src/GLIArchitectureTemplate.py:
461     rework _edit_config() to not write duplicate entries
462 agaffney 914
463 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
464     src/GLIStorageDevice.py:
465     added do_recommended() function to automatically created 256M/1G/* layout
466    
467 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
468     src/gli-dialog.py: added set_distcc to the list
469     GenDialog: added set_distcc. untested.
470     IP: added install_distcc flag.
471     AT: added install_distcc function based on the flag. runs after build_kernel
472 codeman 911 changed AT spawn command for distcc for nodeps.
473 codeman 907
474 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
475     src/GLIUtility.py:
476     add rot13ify() function
477    
478 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
479     src/GenDialog.py
480 codeman 905 added a sentence of text. unchecking support added.
481 codeman 904
482 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
483     src/GLIUtility.py
484     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
485     src/GenDialog.py
486 codeman 902 still working on extra_packages. transformed the list to new format.
487     added GRP indication to list. untested.
488 codeman 901 TODO lists updated.
489     src/fe/dialog/gli-dialog.py
490     spelling mistook.
491    
492 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
493     src/GLIUtility.py:
494     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
495    
496 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
497     src/GLIUtility.py:
498     add get_directory_listing_from_uri()
499     add http support to above
500 agaffney 892 add ftp support to above
501 agaffney 893 add scp support to above
502 agaffney 891 src/GLIArchitectureTemplate.py:
503     "0" instead of 0 for key of single-element dict passed to _edit_config()
504 agaffney 889
505 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
506     value_only -> only_value
507    
508 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
509     gutted out all of etc_portage structure since it is now all handled by
510     etc_files
511    
512 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
513     src/GLIArchitectureTemplate.py:
514     install_packages() sends progress update notifications
515 agaffney 876 src/templates/x86ArchitectureTemplate.py:
516     increase sleep to 5s between format tries
517 agaffney 882 src/GLIClientController.py:
518     pass 'self' to AT instead of 'self._pretend'
519 agaffney 874
520 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
521     logger -> logger.log in x86AT
522    
523 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
524     added set_etc_portage to IP. debugging gli-d's support for it.
525    
526 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
527     src/templates/x86ArchitectureTemplate.py:
528     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
529    
530 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
531     src/GLIArchitectureTemplate.py:
532     add _portage_best_version() function and rework install_packages() to allow
533     for future X of Y tracking
534 agaffney 860 Use best_visible instead of best_version
535 agaffney 862 tracked down and fixed missing = causing empty install extra packages
536 agaffney 864 use = when emerging also
537 agaffney 865 quickpkg hokey pokey
538 agaffney 867 run _get_packages_to_emerge() again with -pk
539 agaffney 857
540 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
541     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
542     the end of install_packages.
543 codeman 850 added updateglid to /src/misc
544 codeman 851 updated all core files with new GPL notice and copyright statement.
545 codeman 848
546 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
547     src/GLIUtility.py:
548     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
549     a snapshot in /mnt/cdrom/snapshots/
550 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
551 agaffney 846 change calls to extra package special case functions to 'self.blah'
552 agaffney 839
553 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
554     src/ArchTemplate: changed "voodoo".
555 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
556     normal emerge sync fails.
557 codeman 836 removed get_sources_from_cd because it is obsolete.
558     add special cases to install_packages. remove fatal exception on package
559     install failure b/c the box will still be bootable.
560 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
561     handled in the FEs.
562 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
563     awaiting testing.
564 codeman 830
565 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
566     src/GLIStorageDevice.py:
567     global try/except block around fs resizable detection code
568 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
569     install-failed cleanup function
570 agaffney 826
571 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
572     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
573    
574 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
575 codeman 814 GLIGenDialog:
576     add drive choices for loaded configs.
577     force snapshot for dynamic_stage3
578     init the snapshoturi input to the cd snapshot if not already selected.
579     if dynamic_stage3, skip the make.conf step.
580     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
581     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
582 codeman 812
583 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
584     src/GLIArchitectureTemplate.py:
585     manually call MAKEDEV in stage3-dynamic code
586 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
587 agaffney 815 src/GLIUtility.py:
588     add beginning of validate_uri() function
589 agaffney 817 add file:/// support to validate_uri()
590 agaffney 822 single quotes when setting livecd password
591 agaffney 811
592 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
593     src/GLIGenDialog.py:
594     change getmountpoint() to get_mountpoint()
595 agaffney 808 src/misc/updategtkfe:
596     committed script to automatically download latest snapshot and run gtkfe
597 agaffney 809 src/templates/x86ArchitectureTemplate.py:
598     fix _configure_lilo_add_windows() for IP -> GLISD stuff
599 agaffney 810 src/GLIArchitectureTemplate.py:
600     give tmp_minor an initial value in mount_local_partitions so that the value
601     remain from the previous drive
602 agaffney 807
603 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
604     src/templates/x86ArchitectureTemplate.py:
605     Fix _configure_lilo() for IP using GLISD stuff
606 agaffney 806 src/GLIArchitectureTemplate.py:
607     install_cron_daemon() treats "none" specially
608 agaffney 805
609 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
610     old patch from Steven Mertens to resolve bug #96642
611 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
612     strings renamed for global use if necessary.
613 codeman 803 fix all three parts of bug 102291
614 codeman 804 disable set_etc_portage until fully-written.
615 codeman 801
616 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
617     src/GLIClientController.py:
618     lower-case http/ftp proxy envvars
619    
620 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
621     src/GLIClientController.py:
622     log end of pre_install steps to aid in debugging
623 agaffney 798 src/templates/x86ArchitectureTemplate.py:
624     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
625 agaffney 797
626 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
627     src/GLIArchitectureTemplate.py
628     check to make sure that the device node we're wait for to exist isn't of
629     type 'free'
630    
631 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
632     src/GLIGenDialog.py:
633     convert install_packages to list in set_extra_packages()
634 agaffney 793 check return code of checklist() call in "Manual" section
635 agaffney 794 *actually* fix the first problem
636 agaffney 792
637 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
638     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
639     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
640    
641 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
642     src/GLIArchitectureTemplate.py:
643     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
644    
645 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
646     Add CDATA support to SimpleXMLParser and add utility functions for it.
647    
648 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
649     src/GLIArchitectureTemplate.py:
650     Fix case where vixie-cron is specified as a full package atom, as we still
651     don't want to run 'crontab /etc/crontab' for it.
652    
653 agaffney 788 *GLI-0.1 (3 Aug 2005)
654    
655 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
656     add scp to list of is_uri() so GenDialog doesn't complain.
657 codeman 769 fixed livecd-kernel bug in bootloader code.
658 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
659     change bootloader to allow for both initrd and initramfs.
660 codeman 777 fix IP for dynamic_stage3.
661 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
662 codeman 777
663 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
664     Added full scp:// URI support to get_uri() in GLIUtility
665 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
666     Remove print statement from scp:// code.
667 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
668 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
669 agaffney 770 Check to make sure pkg can be split on / and some debugging code
670 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
671 codeman 777 SimpleXMLParser handles True/False/None correctly now
672 agaffney 778 Comment out above fix
673 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
674 codeman 764
675 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
676     Removed a FIXME in the GLIClientConfiguration that is no
677     longer needed.
678    
679 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
680     Default to x86 in ClientConfig
681 agaffney 761 Typo in build-a-stage3 code.
682     Remove MAKEDEV call in build-a-stage3 postscript.
683 agaffney 760
684 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
685     Rewrote init of IP for gli-d. Other GenDialog updates.
686     allow network_type to be None in CConfig.
687    
688 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
689     Add _dynamic_stage3 option to IP.
690     Add check for that option to dynamic stage3 code in ArchTemplate.
691 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
692     Fix serialization of dns-servers in ClientConfig.
693 agaffney 755
694 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
695     changed default values of cron/logger in IP.
696     moved GenDialog IP init out to the individual files. gli-dialog's version
697     will change quite a bit.
698    
699 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
700     added ppcArchTemplate. blank now. working on yaboot.
701 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
702     skeleton implementation of _configure_yaboot.
703     small fixes to other templates.
704 codeman 750
705 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
706     GenDialog updates. changed comment in IP.
707    
708 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
709 robbat2 743 src/GLIInstallProfile.py:
710     Fix codeman's screwup of changing the service seperator to ',' in the parser
711     without changing it in the serialization code! Also document this in a
712     comment so you find it easier. Everybody needs to make sure they update
713     their install profiles!
714    
715     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
716 robbat2 742 src/GLIArchitectureTemplate.py:
717     Fix casting of list to string and concat of None with string, as well as
718     commented prototype of checking that mounting actually worked (found a case
719     where mount can return success, but the mount won't be done).
720    
721     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
722 robbat2 740 src/templates/x86ArchitectureTemplate.py:
723 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
724     checking for the device, and sleeping 1 second each time.
725    
726     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
727     src/templates/x86ArchitectureTemplate.py:
728 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
729     bootloader works again. Also rename _install_{grub,lilo} to
730     _configure_{grub,lilo} since they don't install the loaders anymore
731     themselves.
732    
733 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
734     fix global USE flags to not include the arch types at the end.
735     updates to GenDialog and gli-d.
736    
737 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
738     fixing bootloader code for no initrd and initrd->initramfs naming change.
739    
740 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
741     Proper comments and parameters to GLIException in install_mta()
742 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
743 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
744     list_tarball_from_mirror() to eliminate blank last item.
745 agaffney 733
746 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
747     Added stage3 generation code.
748    
749 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
750     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
751     Mild changes to GenDialog.
752    
753 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
754     Remove separate install step configure_rc_conf() since it's handled by
755     update_config_files()
756     Make a copy of newvalues in _edit_config() so quotes aren't added when the
757     function is called twice on the same file.
758    
759 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
760     Missing \ in sed in _get_packages_to_emerge()
761 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
762 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
763     _get_packages_to_emerge()
764 agaffney 726
765 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
766     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
767     in the dialog.py gauge code.
768    
769 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
770     Add code to update_config_files() to go through etc_files and update stuff.
771 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
772 agaffney 724 Only use float() in partition xml parsing code if type == "free"
773 agaffney 720
774 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
775     finished almost all internationalization of GenDialog.
776 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
777 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
778 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
779 codeman 718
780 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
781     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
782    
783 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
784     fix extra entry in list_mirrors()
785     beginning internationalization runthrough.
786    
787 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
788     added dialog.py to /src temporarily until it gets accepted upstream.
789 codeman 714 fix for unused value in form in dialog.py and changed heights.
790     fix GenDialog forms.
791 codeman 713
792 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
793     Changed hostname/domainname for new baselayout.
794     Changed _add_to_runlevel errors to logs.
795     Updated TODO list to show status of GenDialog
796     More updates to GenDialog including two checklists that probably won't work.
797 codeman 711 update IP to use comma-separated list instead of space separated for services.
798 codeman 710
799 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
800     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
801     GenDialog as it gets closer to completion.
802    
803 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
804 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
805     instead of int() in add_partition_device_partition() for minor (closes 96804)
806 agaffney 704
807     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
808     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
809     instead of 'interfaces[interface][1]' since DHCP uses that field for its
810     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
811    
812 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
813 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
814 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
815 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
816 agaffney 704 Fix undefined variable 'output' issue in spawn().
817 agaffney 697
818 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
819     More updates to GenDialog and gli-d.
820    
821 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
822     Modify list_mirrors() to return a list of mirror URL/name pairs.
823    
824 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
825     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
826     get subarch.
827    
828 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
829     Backend partitioning will create disklabel is none exists. Installprofile
830 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
831     mount_local_partitions() to remember device along with minor in the
832 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
833     add else block to log unsupported netmount types to mount_network_shares()
834 agaffney 691
835 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
836     src/GLIArchitectureTemplate.py:
837 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
838     src/fe/cli/clife.py:
839     Logging system.
840     src/GLIUtility.py, src/GLIStorageDevice.py:
841     Add comments about re-writes needed for boxes without sysfs.
842    
843     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
844     src/GLIArchitectureTemplate.py:
845 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
846     'make dep' call for custom compile. build_mode support for prepare-only and
847     none types completed. custom compile function chains shell functions in
848     spawned script, to allow for catching all errors.
849    
850 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
851     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
852     and GenDialog. other gendialog updates as well. kernel updates untested.
853    
854 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
855     src/GLIInstallProfile.py:
856     Change structure of etc-portage stuff. The serialization was broken before my
857     last commit, and I am the only person that's ever used it. The new schema is
858     as follows:
859     <etc-portage>
860     <file name="package.mask"/>
861     <file name="package.unmask">
862     <entry atom="sys-kernel/openmosix-sources"/>
863     </file>
864     <file name="package.use">
865     <entry atom="sys-libs/db">
866     -java
867     </entry>
868     <entry atom="dev-libs/cyrus-sasl">
869     -ldap
870     </entry>
871     </file>
872     </etc-portage>
873    
874    
875 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
876     src/GLIInstallProfile.py:
877     Add new entry for gli-profile/kernel-build-method item. Add missing
878     serialize_etc_portage (temporary). Make serialize_make_conf always print the
879     keys in the same order.
880    
881 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
882     src/GLIArchitectureTemplate.py:
883 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
884     was repeatedly appended to make.conf.
885    
886     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
887     src/GLIArchitectureTemplate.py:
888 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
889     successfully mounted swap device for using swapoff. Add proper error checking
890     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
891     'file'. Clean up some redundant code (thanks to pychecker).'
892    
893 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
894 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
895 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
896     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
897 agaffney 668
898 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
899     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
900     in add_network_interface.
901    
902 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
903     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
904     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
905 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
906     prepare_chroot.
907 robbat2 664
908 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
909     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
910     +src/fe/installer-gtk:
911     Add new automated CLI frontend. Add scripts that are the intended means to
912     use each frontend.
913    
914 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
915 robbat2 663 src/GLIClientController.py:
916     Add null type to network config, for cases where the interface is already up
917     and should not be touched (netboot for example).
918    
919     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
920 robbat2 652 src/GLIArchitectureTemplate.py:
921 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
922     string!. Try to use binary packages if available by default.
923    
924     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
925     src/GLIArchitectureTemplate.py:
926 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
927     actually exists before we try to add it. set_services phase must take place
928     after the package installation, otherwise the init scripts might not exist.
929     Find the correct init script for the cron and logging daemons, and add that
930     instead of the package atom.
931    
932     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
933     src/GLIArchitectureTemplate.py:
934 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
935     usage of 'file' to 'contents' for the variable name, as it shadows
936     __builtin__.file.
937    
938     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
939     src/GLIArchitectureTemplate.py:
940 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
941     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
942     for 'none' kernel config for build_kernel phase. Put kernel_script in
943     /var/tmp instead of /root for build_kernel phase.
944    
945 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
946     Rename mta variables to match syslog/cron variables.
947    
948 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
949 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
950     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
951     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
952     src/templates/.cvsignore, src/tests/.cvsignore:
953     Refactor partition formatting again to include error checking. Allow 'none'
954     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
955    
956     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
957 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
958     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
959     only have a single spawn call.
960    
961 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
962     refixed samyron's fix of set_architecture_template.
963    
964 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
965     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
966     be executable.
967    
968 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
969     Fixed one of the FIXME's in the ClientConfiguration. There is now some
970     error checking when you call set_architecture_template.
971    
972 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
973     moved the mkfsopts input to the partition options menu instead of the during
974     the creation process. updated GenDialog to say it supports reiserfs v3.
975    
976 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
977     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
978     Complete support for 'mkfsopts' parameter in main system and dialogfe.
979     Add support for other partition types to dialogfe.
980     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
981     avoid integer overflows and wraparounds.
982    
983 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
984     Removed start/end from XML output and added mkfsopts to partitioning info.
985 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
986 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
987 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
988     partitioning. Fix free space overwriting bug. Remove a few unused functions
989 agaffney 640 from rewrite. Fix call to get_partition_at()
990 agaffney 631
991 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
992     Updates to GenDialog and dialogfe.
993    
994 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
995 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
996 agaffney 627
997 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
998     more GenDialog updates to partitioning.
999    
1000 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1001     Indenting issue in GLISD/get_ordered_partition_list.
1002     updates to GenDialog partitioning and added default UTC for timezone in IP.
1003    
1004 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1005     Added GLISD.get_model()
1006    
1007 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1008     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1009     More updates to GenDialog :)
1010    
1011 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012     Added get_interface_realname() function.
1013    
1014 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1015     Added auto-save of CConfig and copying to new /root after install.
1016     yet even more GenDialog updates.
1017    
1018 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1019     removed print statement from GLISD. more updates to GenDialog.
1020    
1021 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1022 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1023 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1024 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1025     places in GLIClientConfiguration.
1026 agaffney 608
1027 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1028     Fix mount_local_partitions(), configure_fstab(), and
1029 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1030 agaffney 601 A few more fixes for templates/x86Archtemplate
1031 agaffney 599
1032 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1033     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1034     a work in progress.
1035    
1036 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1037     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1038     directly. GLISD can now handle data imported from XML.
1039    
1040 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1041     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1042     handle blank (no disklabel) disks.
1043    
1044 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1045     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1046     up, documented, and separated out serialization and grouped all sections.
1047    
1048 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1049     Reorganization of ClientConfiguration and gutting of unused functions.
1050     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1051    
1052 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1053     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1054    
1055 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1056 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1057 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1058     copies it into /mnt/gentoo/root
1059 agaffney 588
1060 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1061     Moved URI parsing into new function parse_uri()
1062    
1063 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1064     Added XMLParser module.
1065    
1066 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1067     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1068 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1069 agaffney 580
1070 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1071     Updated finishing_cleanup for new unmounting method from agaffney.
1072    
1073 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1074 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1075 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1076     unicode support to is_realstring().
1077 agaffney 575
1078 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1079 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1080 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1081 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1082     instead of --nocolor.
1083 agaffney 571
1084 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1085     Added GLIGenDialog.py to make a generic class for the dialog functions that
1086 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1087     date changes. 2004->2005.
1088 codeman 566
1089 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1090     Removed 'quiet=True' from spawn() calls
1091    
1092 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1093     Updated GLIUtility with patches from chotchki. Also added documentation
1094    
1095 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1096     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1097     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1098     from bug #89683, mostly touchups.
1099    
1100 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1101     GLIStorageDevice cleanup patch from bug #91761
1102    
1103 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1104     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1105 agaffney 553 _edit_config(). Error logging casts 'error' to str
1106 agaffney 551
1107 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1108 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1109     code to CC to handle exceptions *not* thrown by the installer itself.
1110 agaffney 548
1111 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1112     get_max_mb_for_resize() returns -1 if not self.resizeable
1113    
1114     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1115 agaffney 539 More dirty rsync hacks :-/
1116    
1117 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1118     Patches from chotchki (bug #90325) to improve CC networking. untested.
1119    
1120 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1121 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1122 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1123 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1124 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1125 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1126     _get_packages_to_emerge()
1127 agaffney 528
1128 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1129     Added group-adding code to set_users in ArchTemplate
1130    
1131 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1132     Added post-install script code
1133    
1134 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1135     Fixed encapsulation issues in GLIClientController (bug #90141)
1136    
1137 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1138     Update resizing code in GLIStorageDevice
1139    
1140 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1141     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1142    
1143 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1144     Reverted change to ArchTemplate and added support for commented line in old
1145     code.
1146    
1147 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1148     Changed _edit_config() to modify value in-place instead of commenting out and
1149     adding the new value to the end of the file.
1150    
1151 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1152     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1153     Also updated TODO list.
1154    
1155 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1156     Use blackace's one-liner to add comments for all function for use with
1157     pythondoc.
1158    
1159 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1160     Moved 'end >= device_sectors' check out of loop to check for next partition's
1161 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1162 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1163     point of logical is now adjusted along with start.
1164 agaffney 503
1165 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1166 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1167 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1168     key in partition information due to new partition code leaving them as float.
1169 agaffney 497
1170 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1171 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1172 agaffney 494
1173 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1174     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1175    
1176     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1177 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1178    
1179 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1180 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1181     sed to properly strip out junk.
1182 agaffney 481
1183 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1184 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1185 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1186 codeman 475
1187 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1188     Fixed indent problem in GLICController
1189    
1190 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1191     Check for disklabel type "loop" and use the device name without a minor.
1192    
1193 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1194     Remove /tmp/compile_output.log and /var/log/install.log when install is
1195 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1196 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1197 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1198 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1199 agaffney 453
1200 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1202     when unpacking tarball.
1203 agaffney 451
1204 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1205 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1206     filesystem_tools code.
1207 codeman 443
1208 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1209     Changed the print statements to logging in the partitioning BE code.
1210     the logger may need to be imported to the x86archtemplate. unknown yet.
1211 codeman 432 Added the finishing_cleanup function.
1212 codeman 433 added a fix to the logger from BenUrban
1213 codeman 427
1214 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1215     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1216     URIs. The blank uri check has been commented out.
1217 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1218 codeman 422
1219 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1220     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1221    
1222 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1223     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1224 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1225 agaffney 415
1226 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1227     small changes to setup_network_post. moved adding to runlevel of net.x to
1228     after the device gets symlinked. added domainname runlevel command.
1229    
1230 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1231 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1232 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1233     spawn() call in livecd-kernel code to pass environment variables.
1234 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1235     the install profile if available.
1236 agaffney 402
1237     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1239     to handle installing the livecd kernel into the new system.
1240    
1241 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1242     should emerge hotplug and coldplug before adding them to runlevel.
1243    
1244 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1245 codeman 395 took chroot out of grub_install command.
1246    
1247     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1248     Changed chroot wrapper code in spawn() to write the wrapper the python way
1249     instead of the bash way to avoid quote conflicts. Added
1250 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1251 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1252     as it breaks the piping.
1253 codeman 390
1254 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1255     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1256    
1257 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1258     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1259 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1260 agaffney 389 GLIInstallProfile.
1261 agaffney 385
1262 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1263 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1264     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1265     into /mnt/gentoo in prepare_chroot()
1266 agaffney 379
1267 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1268     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1269 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1270     to start/end sectors
1271 agaffney 375
1272     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1273 agaffney 374 Add 2>&1 to cmd in spawn()
1274    
1275 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1276     Modified GLIUtility.exitsuccess() to work with return value from
1277 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1278     creates wrapper script for commands run inside chroot so multiple commands
1279 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1280     for the generated script from spawn()
1281 agaffney 369
1282 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1283     Removed default values for stage tarball URI and portage tree URI from
1284     InstallProfile. These should be set by the FEs. also added services step to
1285     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1286     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1287    
1288 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1289     Small fix for setting the default gateway. Also added feature to dialogfe.
1290    
1291 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1292     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1293    
1294 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1295 codeman 346 Fixed a bunch of true -> True typos. lots of em
1296 codeman 347 only write new resolv.conf if there are dns servers listed.
1297 codeman 345
1298 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1299     Commented out 'display_on_tty8=True' in start_portmap()
1300    
1301 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1302     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1303    
1304 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1306     lang parameter to __init__()
1307 codeman 331
1308     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1309     updates to TODO list.
1310 esammer 4
1311 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1313     'emerge -p blah'
1314 agaffney 322
1315 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1316 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1317     added quickpkg to TODO list
1318 codeman 319
1319 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1320     Changed the raising of 'warning' exceptions to a simple log of the error
1321     so that the installer can continue.
1322    
1323 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1324     Some big changes. First, changed most output to display_on_tty8.
1325     Second, added log lines to all templates. Some smaller fixes such as typos.
1326     Also did some cleanups of old commented lines.
1327    
1328 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1330 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1331 agaffney 310
1332 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1333     more updates to TODO list. hopefully we'll soon start removing items instead
1334     of adding them.
1335    
1336 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1337     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1338    
1339 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1340 codeman 295 updated TODO list. (again)
1341 codeman 293
1342 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1343     changed output of portmap start to display_on_tty8.
1344     fixed bootloader for udev and multiple kernels
1345 codeman 288 fixed custom kernel config (again)
1346 codeman 286
1347 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1348     changed default value of CC._enable_ssh to True because this is smart.
1349 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1350 codeman 281
1351 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1352     partition() now waits until after it checks for partition flags before delete
1353     the partitions :P
1354    
1355 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1356 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1357 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1358     blank.
1359 agaffney 271
1360 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1361     Various fixes related to the add_users function. Still not yet finished.
1362 codeman 269 Added things to the TODO list. Lets start using that!
1363 codeman 268
1364 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1365     Added code to x86Template to format newly created partitions. Also added
1366 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1367 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1368     mounting code.
1369 agaffney 264
1370 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1371     Took out unnecessary setting of random livecd root password. the cd already
1372     sets it randomly.
1373    
1374 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1375     Took out an unneeded step from CC's run()
1376    
1377 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1378     Attempt at detecting and adding windows partitions to lilo.
1379    
1380 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1381 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1382     partition. fixed misc exit_status => exitstatus typo.
1383 codeman 235
1384 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1386     resizing ntfs and ext2/3.
1387 agaffney 230
1388 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1389     Fixed partition() in x86Template so that it scans through logicals and deletes
1390 agaffney 229 before deleting containing extended partition. Also clears partition table to
1391     be safe before third pass.
1392 agaffney 228
1393 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1394     Added mount_network_shares. not able to test it from this computer.
1395     will test when i get back to school.
1396     also added start_portmap to the client_controller as an always-do.
1397     agaffney says this is needed for NFS mounts to work.
1398    
1399 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1400     Partial rewrite of partitioning code in x86Template. No longer shells out to
1401     parted to perform actions, now uses all pyparted calls. Code "works" in a
1402     test, but still needs lots of TLC. Also modified tests/install.py to work
1403     with x86Template and GLIClientConfiguration.
1404    
1405 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1406     Initial move of partitioning code from ArchTemplate to x86Template.
1407 agaffney 220
1408 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1409 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1410 codeman 222
1411     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1412 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1413     Test Install ran very well (skipping partitioning).
1414    
1415 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1416 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1417 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1418     some may still have eluded me.
1419 codeman 215
1420     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1421 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1422     Just finished mount_local_partitions in GLIArchitectureTemplate
1423    
1424 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1425     Added get_num_sectors() to GLIStorageDevice.
1426    
1427     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1428 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1429 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1430     from GLIInstallProfile.
1431 agaffney 205
1432 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1433     GLIStorageDevice returns "unknown" instead of "" for get_type()
1434    
1435 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1436 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1437     actually work. Commented out resizability checking code for speed.
1438 agaffney 183
1439 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1440     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1441     GLIStorageDevice at the suggestion of plors
1442    
1443 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1444     Added a function to GLIUtility to pull a value from a make.conf-style config
1445 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1446 agaffney 162
1447 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1448 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1449     network mounts from partition data structure in GLIInstallProfile
1450 agaffney 161
1451 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1452     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1453     can be resized.
1454    
1455 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1456     Added some of the final functions to GLIInstallTemplate.
1457     Yes this project is still active despite rare use of the Changelog!
1458    
1459 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1460     Added the GLIPartitionTools.py file. This is a temporary insertion of
1461     partitioning tools that will eventually go into their own package.
1462    
1463 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1464     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1465     for the program). Added __init__(install_profile, client_configuration) to
1466     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1467     to avoid constantly passing stuff every time we call a method.
1468    
1469 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1470    
1471     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1472     files without messing up all the other stuff in them. This will be used for making
1473     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1474    
1475 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1476    
1477     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1478     have a few basic things. I added two private methods. One is _depends(). This
1479     will be used for dependency checking (ie. unpacking a tarball requires that
1480     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1481     same syntax as os.system(), however, instead of being run in the liveCD
1482     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1483     isolated the code. Hope to work more this week to get this class formed...
1484    
1485 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1486    
1487     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1488     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1489     to allow for easier modification (mutable, rather than immutable objects). Updated
1490     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1491     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1492     Added initial unit test code.
1493    
1494 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1495    
1496     Added initial changelog. Setting up the basic structure of the CVS repository
1497     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1498     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20