/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1184 - (hide annotations) (download)
Sat Dec 24 17:29:33 2005 UTC (8 years, 11 months ago) by agaffney
File size: 62809 byte(s)
  src/GLIPortage.py:
  use separate script for GRP deps
  src/runtimedeps.py:
  initial commit

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1184 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.544 2005/12/24 17:29:33 agaffney Exp $
5 codeman 773
6 agaffney 1033 *GLI-0.3 (27 Oct 2005)
7 agaffney 791
8 agaffney 1184 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     use separate script for GRP deps
11     src/runtimedeps.py:
12     initial commit
13    
14 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
15     src/GLIPortage.py:
16     initial commit
17 agaffney 1182 move some of portage function from GLIAT
18 agaffney 1183 flipped around a few function args
19 agaffney 1182 src/GLIArchitectureTemplate.py:
20     revamp install_packages() for new GLIPortage
21 agaffney 1181
22 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
23     src/GLIArchitectureTemplate.py:
24     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
25    
26 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
27     src/net/server/gliserv.py:
28     wrap generated code in a class to isolate it a bit better
29     302 redirects work
30 agaffney 1179 don't use cgi.escape() for <% %>
31 agaffney 1177 src/net/server/html/webgli/*:
32     load/save profile
33 agaffney 1178 src/GLIUtility.py:
34     change /sbin/lspci to just lspci
35 agaffney 1176
36 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
37     src/GLIClientController.py:
38     change ordering of statements in CC run() while loop to not go past the end
39     of the array
40 agaffney 1173 src/GLIArchitectureTemplate.py:
41     removed redundant bind mounts
42 agaffney 1172
43 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
44     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
45 codeman 1171 added a diagram by blackace from last night.
46     added the glossary in RTF format.
47 codeman 1170
48 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
49     x86AT: separated out emerge/configure from running of bootloader
50     added MBR drive support to lilo.
51     these changes will likely not work.
52     AT: added setup_and_run_bootloader step.
53    
54 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
55     src/net/server/gliserv.py:
56     call generated code in a function
57     src/net/server/html/webgli/*:
58     include top/bottom
59 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
60     src/GLIClientCongifuration.py:
61     install mode magic
62 agaffney 1163
63 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
64     src/GLIClientController.py:
65     use GLIException when there's an import problem
66 agaffney 1159 added debug code to show install_steps
67 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
68     add . to import path
69 agaffney 1160 proper path this time: ../../templates
70 agaffney 1162 src/GLIArchitectureTemplate.py:
71     add _portage_best_version() function
72 agaffney 1156
73 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
74     added initial glossary and gimli diagram to the docs directory.
75 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
76 codeman 1154
77 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
78     src/net/server/html/webgli/:
79     converted globaluse, localuse, networkmounts, portagetree, and stageselection
80 agaffney 1150 moved saveclientconfig stuff into clientconfig
81 agaffney 1151 moved saveconfigfiles into config files
82     converted etc_portage and makedotconf
83 agaffney 1152 converted bootloader and kernel
84 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
85 agaffney 1151 src/net/server/gliserv.py:
86     proper 404 handling for .pyhtml extension
87     HTML escape <% %> stuff
88 agaffney 1152 work around python's sucky regexes
89 agaffney 1153 src/GLIInstallProfile.py:
90     allow set_{rsync,ftp,http}_proxy() to accept empty values
91 agaffney 1149
92 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
93     src/net/server/gliserv.py:
94 agaffney 1148 initial commit of Legolas templating engine
95     302 redirects
96 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
97     minor changes for new code
98     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
99     initial commit of the conversion from the monolithic WebGLIHandler.py to the
100 agaffney 1148 one file per path Legolas goodness
101     partitioning[2-4] done
102 agaffney 1147
103 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
104     webgli: dhcp options in CC and post-install.
105     updated comparison chart.
106 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
107 codeman 1145
108 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
109     webgli_template.html: valign=top on left side.
110     webgli: fix bootloader boot_device. now working.
111 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
112 agaffney 1138
113 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
114     src/net/server/webgli_template.html:
115     increase padding for content cell to 7px and add colspan=2
116    
117 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
118     webgli: added graphic bar on top
119     webgli: added hover effects on the links on the left
120     webgli: re-rendered header_bg.png to stretch without artifacts
121    
122 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
123     webgli: make.conf disabling fixes for dynamic_stage3
124     fixed portage snapshot browse popup
125     all changes tested.
126     webgli: add debug mode to CC screen. the screen still needs lots of work.
127    
128 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
129     added debug mode question to gli-dialog
130     added CC proxies to CC networking for gli-dialog
131 codeman 1125 webgli: fixed skip CC networking if connection active
132     webgli: portage snapshot defaults to CD
133     webgli: bootloader mbr drive selection
134     webgli: USE flags unselectable if dynamic_stage3
135     webgli: manual extra packages and save button.
136    
137 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
138     src/GLIUtility.py:
139     change ping count to 2
140 agaffney 1121 docs/comparison.html
141     initial commit
142 agaffney 1119
143 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
144     src/templates/x86ArchitectureTemplate.py:
145     fix map() issue with grub code
146     replace kernel_names and initrd_names loops with one-liners
147    
148 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
149     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
150 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
151 codeman 1106 failure cleanup now an option for gli-dialog.
152 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
153     added comparison list and updated TODO!
154 codeman 1102
155 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
156     src/GLIArchitectureTemplate.py:
157     fix to stage1() debug code
158 agaffney 1098 fix to stage2() debug code
159 agaffney 1097
160 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
161     some more bootloader code fixes. forgot boot_device != mbr_device.
162 agaffney 1097
163     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
164     src/GLIStorageDevice.py:
165     fix to unallocated space merging when last one is after part 4
166 codeman 1096
167 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
168     src/GLIArchitectureTemplate.py:
169     small fix to debugging code in copy_pkg_to_chroot()
170    
171 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
172 codeman 1096 more bugfixes with bootloader code
173     gli-dialog side appears to work
174 codeman 1086
175 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
176 codeman 1080 initial adding of boot_device to backend.
177     initial boot_device support added to gli-dialog.
178 codeman 1096 some fixes of my poor coding
179 codeman 1077
180 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
181 codeman 1075 converted gli-dialog to use the install_package_list.
182     gtkfe has already been converted by AllanonJL
183 codeman 1076 new way working in gli-dialog now and added to webgli.
184 codeman 1077 added set/get_boot_device() to IP
185 codeman 1075
186 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
187     get_install_package_list added to InstallProfile. This can be used by the FEs
188    
189 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
190     src/templates/x86ArchitectureTemplate.py:
191     call ls with '-1 --color=no'
192    
193 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
194 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
195 codeman 1069
196 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
197     src/GLIArchitectureTemplate.py:
198     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
199     confused
200    
201 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
202     removed protocols from rc.conf screens
203     finished initial rc.conf and make.conf in webgli
204    
205 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
206     src/net/server/gliserv.py:
207     add -h option to usage()
208 agaffney 1063 show time and request URI in debug mode
209 agaffney 1064 show client IP in debug mode
210 agaffney 1065 just use IP instead of trying to do a reverse lookup
211 agaffney 1062
212 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213     src/net/server/gliserv.py:
214     'classier' 401 message
215     proper commandline parsing
216     help via -h
217     user/pass can be specificed via commandline option
218    
219 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
220 agaffney 1057 src/net/server/gliserv.py:
221 agaffney 1059 basic HTTP auth
222    
223     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
224     src/net/server/gliserv.py:
225 agaffney 1057 dynamic module reloading (yipee!)
226 agaffney 1058 send 'Last-Modified' header for real files
227     respond to HEAD with just headers
228 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
229     icons for drives
230    
231 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
232     src/net/server/handlers/WebGLIHandler.py:
233     initial 'pretty' partition table display support
234 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
235 agaffney 1044 radio buttons and pretty display work together
236     META redirect instead of javascript
237     pretty display stretches across entire screen
238 agaffney 1046 'Recommended layout' and 'Clear drive' functions
239 agaffney 1047 properly catch exceptions from do_recommended()
240 agaffney 1049 src/GLIArchitectureTemplate.py:
241     replace preinst, copy, postinst, rm steps with qmerge
242 agaffney 1050 whoops...that shouldn't have been commented out
243 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
244 agaffney 1052 more generic of symlink crappiness
245 agaffney 1053 new copy_pkg_to_chroot() actually works now
246 agaffney 1042
247 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
248     src/GLIStorageDevice.py:
249     initial generic disk support
250 agaffney 1040 fixes for add_partition() code
251 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
252     added support for creating generic disks
253 agaffney 1040 add new partition working
254 agaffney 1041 save and delete partitions
255 agaffney 1037
256 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
257     webgli: Partitioning making progress.
258    
259 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
260     src/GLIArchitectureTemplate.py:
261     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
262     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
263     dir) and works around /etc/gconf symlink problem
264    
265 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
266     webgli: lots of updates. preliminary partitioning. extra packages works.
267    
268 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
269     src/net/server/gliserv.py:
270     httpd now supports HTTPS and falls back to HTTP if not available
271 agaffney 1030 make fallback actually work
272 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
273     SecureSocketServer is now threaded
274    
275 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
276     src/net/client/gliclient.py:
277     try to use HTTPS for XMLRPC first and fallback to HTTP
278 agaffney 1028 pretend mode
279 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
280     HTTPS XMLRPC goodness from samyron
281 agaffney 1028 pass name of certificate
282 agaffney 1026
283 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
284     wegli: daemons and services screens done.
285    
286 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
287     webgli: networking and users screens
288     added return_redirect to handler.py
289 codeman 1022 loading and saving install/client profiles works for webgli now
290     Review also done
291 agaffney 1033
292     *GLI-0.2 (27 Oct 2005)
293 codeman 1025
294 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
295     src/templates/x86ArchitectureTemplate.py:
296     properly check for bootloader emerge exist status with exitsuccess()
297 agaffney 1010 log output of grub install command
298 agaffney 1011 add --batch --no-floppy to grub command
299 agaffney 1013 grubinstallstring only gets logged if debug is on
300 agaffney 1012 src/GLIUtility.py:
301     update progress bar to 100% when process finishes
302 agaffney 1009
303 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
304     src/GLIClientController.py:
305     added debugging code for the interaction between the 2 threads via Event()
306 agaffney 1003 src/GLIUtility.py:
307     doubled the buffer size in spawn()
308 agaffney 1004 bump buffer size up to 16384
309     only report progress in 5% increments
310 agaffney 1005 src/GLIArchitectureTemplate.py:
311     kernelpkgs.txt support code
312 agaffney 1006 above disabled because it sucks
313 agaffney 1007 added add_pkg_to_world()
314 agaffney 1002
315 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
316     src/GLIArchitectureTemplate.py:
317     use tar | tar to copy files in copy_pkg_to_chroot()
318     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
319    
320 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
321     DEBUGGING ADDED TO AT. verbose field added to CConfig.
322    
323 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
324     src/net/server/gliserv.py:
325     / maps to index.html
326     look for actual files in html/
327     src/net/html:
328     new template
329 agaffney 998 src/GLIUtility.py:
330     added parse_vdb_contents()
331     src/GLIArchitectureTemplate.py:
332     added copy_pkg_to_chroot()
333     added debug code to dynamic-stage3
334 agaffney 999 switch dynamic-stage3 to new method
335     lots of bug fixes from adding debug code
336 agaffney 993
337 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
338     webgli initial bootloader support + changed make.conf.
339 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
340 codeman 983
341 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
342 agaffney 982 src/GLIUtility.py:
343 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
344 agaffney 981 add unpack progress to portage snapshot
345 agaffney 982 use read() instead of readlines() in spawn()
346     only update progress bar for whole percents
347 agaffney 980
348 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
349     src/templates/x86ArchitectureTemplate.py:
350     change call to 'grub' to use GLIUtility.exitsuccess()
351 agaffney 977 add definition of 'build_mode' in _configure_lilo()
352 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
353     fix so subshell is called in root shell
354    
355 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
356     src/net/server/handlers/WebGLIHandler.py:
357     stage screen launches URI browser in sized window with various properties set
358    
359 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
360     src/misc/updategtkfe:
361     updated to actually work
362 agaffney 972 remove previous snapshot and extracted dir before downloading
363 agaffney 973 src/misc/updateglid:
364     updated to actually work
365 agaffney 974 src/templates/x86ArchitectureTemplate.py:
366     fixed bug where grub code was looking for 'root+root+file_name2'
367 agaffney 971
368 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
369     src/net/server/handlers/WebGLIHandler.py:
370     URI browser
371 agaffney 970 added mirror selection
372 agaffney 969 src/GLIUtility.py:
373     ls via ssh strips off ending *
374 agaffney 968
375 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
376     more updates to webgli. stage selection.
377    
378 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
379     updated webgli with preliminary Network Mounts support.
380    
381 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
382     GenDialog: string formatting and yes/no label fixes.
383     added WebGLI template for gliserv.py
384     added WebGLIHandler as well as a definition for it in gliserv.py
385     updates to the webgli files even though they won't be there for long.
386 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
387     goes public.
388 codeman 952
389 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
390     src/net/server/gliserv.py:
391     override dict to not be so anal
392 agaffney 949 main server now loads separate module to handle requests
393 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
394 agaffney 949 split out profile URLs into separate handler function
395 agaffney 950 move handlers into subdirectory
396 agaffney 956 add Welcome and Clients handlers
397 agaffney 949
398 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
399     src/GLIUtility.py:
400     raise exception if password prompt received twice
401    
402 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
403 agaffney 944 src/GLIUtility.py:
404 agaffney 943 removed rot13ify()
405    
406     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
407 agaffney 935 src/net/server/gliserv.py:
408     allow for param to be passed multiple times in GET
409 agaffney 940 no XMLRPC functions return None
410 agaffney 941 modify POST request parsing to only create a list if needed
411 agaffney 942 fix GET request parsing so the list creation for multiple values works
412 agaffney 940 src/net/client/gliclient.py:
413     various typo and type mismatch fixes
414     exit after exception
415 agaffney 935
416 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
417     src/net/client/gliclient.py:
418     initial commit
419 agaffney 934 pass MAC to XMLRPC functions
420     src/net/server/GLIServerProfile.py:
421     rename GLIClientsProfiles to GLIServerProfile
422 agaffney 933
423 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
424     src/net/server/gliserv.py:
425     now handles POST requests
426     move majority of request handling code to common_handler() to reduce code
427     duplication
428 agaffney 931 profile loading
429     client reg via XMLRPC goes into SharedInfo()
430     /showclients redesign
431     template fixes
432 agaffney 932 allow handler functions to add/change headers
433     save profile
434 agaffney 930
435 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
436     src/net/server/GLIClientsProfiles.py:
437     initial commit
438     src/net/server/template.html:
439     initial commit
440     src/net/server/gliserv.py:
441     add template mojo
442    
443 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
444     src/net/server/gliserv.py:
445     XMLRPC mojo
446    
447 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
448     src/GLIArchitectureTemplate.py:
449     add code in _edit_config() to comment line where variable is defined
450     previously
451 agaffney 920 insert new line under previous definition of variable if it exists
452 agaffney 921 small _edit_config() cleanup
453 agaffney 923 src/GLIStorageDevice.py:
454     add clear_partitions() function
455 agaffney 924 new sizes for recommended partition layout
456 agaffney 925 automatically calculate swap size for recommended layout
457 agaffney 919
458 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
459     src/templates/x86ArchitectureTemplate.py:
460     fat16 mojo
461    
462 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
463     src/GLIStorageDevice.py:
464     prevent do_recommended() from being run twice
465 agaffney 916 rewrite do_recommended() to be more robust
466 agaffney 917 src/GLIArchitectureTemplate.py:
467     rework _edit_config() to not write duplicate entries
468 agaffney 914
469 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
470     src/GLIStorageDevice.py:
471     added do_recommended() function to automatically created 256M/1G/* layout
472    
473 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
474     src/gli-dialog.py: added set_distcc to the list
475     GenDialog: added set_distcc. untested.
476     IP: added install_distcc flag.
477     AT: added install_distcc function based on the flag. runs after build_kernel
478 codeman 911 changed AT spawn command for distcc for nodeps.
479 codeman 907
480 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
481     src/GLIUtility.py:
482     add rot13ify() function
483    
484 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
485     src/GenDialog.py
486 codeman 905 added a sentence of text. unchecking support added.
487 codeman 904
488 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
489     src/GLIUtility.py
490     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
491     src/GenDialog.py
492 codeman 902 still working on extra_packages. transformed the list to new format.
493     added GRP indication to list. untested.
494 codeman 901 TODO lists updated.
495     src/fe/dialog/gli-dialog.py
496     spelling mistook.
497    
498 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
499     src/GLIUtility.py:
500     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
501    
502 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
503     src/GLIUtility.py:
504     add get_directory_listing_from_uri()
505     add http support to above
506 agaffney 892 add ftp support to above
507 agaffney 893 add scp support to above
508 agaffney 891 src/GLIArchitectureTemplate.py:
509     "0" instead of 0 for key of single-element dict passed to _edit_config()
510 agaffney 889
511 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
512     value_only -> only_value
513    
514 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
515     gutted out all of etc_portage structure since it is now all handled by
516     etc_files
517    
518 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
519     src/GLIArchitectureTemplate.py:
520     install_packages() sends progress update notifications
521 agaffney 876 src/templates/x86ArchitectureTemplate.py:
522     increase sleep to 5s between format tries
523 agaffney 882 src/GLIClientController.py:
524     pass 'self' to AT instead of 'self._pretend'
525 agaffney 874
526 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
527     logger -> logger.log in x86AT
528    
529 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
530     added set_etc_portage to IP. debugging gli-d's support for it.
531    
532 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
533     src/templates/x86ArchitectureTemplate.py:
534     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
535    
536 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
537     src/GLIArchitectureTemplate.py:
538     add _portage_best_version() function and rework install_packages() to allow
539     for future X of Y tracking
540 agaffney 860 Use best_visible instead of best_version
541 agaffney 862 tracked down and fixed missing = causing empty install extra packages
542 agaffney 864 use = when emerging also
543 agaffney 865 quickpkg hokey pokey
544 agaffney 867 run _get_packages_to_emerge() again with -pk
545 agaffney 857
546 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
547     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
548     the end of install_packages.
549 codeman 850 added updateglid to /src/misc
550 codeman 851 updated all core files with new GPL notice and copyright statement.
551 codeman 848
552 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
553     src/GLIUtility.py:
554     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
555     a snapshot in /mnt/cdrom/snapshots/
556 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
557 agaffney 846 change calls to extra package special case functions to 'self.blah'
558 agaffney 839
559 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
560     src/ArchTemplate: changed "voodoo".
561 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
562     normal emerge sync fails.
563 codeman 836 removed get_sources_from_cd because it is obsolete.
564     add special cases to install_packages. remove fatal exception on package
565     install failure b/c the box will still be bootable.
566 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
567     handled in the FEs.
568 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
569     awaiting testing.
570 codeman 830
571 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
572     src/GLIStorageDevice.py:
573     global try/except block around fs resizable detection code
574 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
575     install-failed cleanup function
576 agaffney 826
577 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
578     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
579    
580 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
581 codeman 814 GLIGenDialog:
582     add drive choices for loaded configs.
583     force snapshot for dynamic_stage3
584     init the snapshoturi input to the cd snapshot if not already selected.
585     if dynamic_stage3, skip the make.conf step.
586     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
587     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
588 codeman 812
589 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
590     src/GLIArchitectureTemplate.py:
591     manually call MAKEDEV in stage3-dynamic code
592 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
593 agaffney 815 src/GLIUtility.py:
594     add beginning of validate_uri() function
595 agaffney 817 add file:/// support to validate_uri()
596 agaffney 822 single quotes when setting livecd password
597 agaffney 811
598 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
599     src/GLIGenDialog.py:
600     change getmountpoint() to get_mountpoint()
601 agaffney 808 src/misc/updategtkfe:
602     committed script to automatically download latest snapshot and run gtkfe
603 agaffney 809 src/templates/x86ArchitectureTemplate.py:
604     fix _configure_lilo_add_windows() for IP -> GLISD stuff
605 agaffney 810 src/GLIArchitectureTemplate.py:
606     give tmp_minor an initial value in mount_local_partitions so that the value
607     remain from the previous drive
608 agaffney 807
609 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
610     src/templates/x86ArchitectureTemplate.py:
611     Fix _configure_lilo() for IP using GLISD stuff
612 agaffney 806 src/GLIArchitectureTemplate.py:
613     install_cron_daemon() treats "none" specially
614 agaffney 805
615 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
616     old patch from Steven Mertens to resolve bug #96642
617 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
618     strings renamed for global use if necessary.
619 codeman 803 fix all three parts of bug 102291
620 codeman 804 disable set_etc_portage until fully-written.
621 codeman 801
622 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
623     src/GLIClientController.py:
624     lower-case http/ftp proxy envvars
625    
626 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
627     src/GLIClientController.py:
628     log end of pre_install steps to aid in debugging
629 agaffney 798 src/templates/x86ArchitectureTemplate.py:
630     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
631 agaffney 797
632 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
633     src/GLIArchitectureTemplate.py
634     check to make sure that the device node we're wait for to exist isn't of
635     type 'free'
636    
637 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
638     src/GLIGenDialog.py:
639     convert install_packages to list in set_extra_packages()
640 agaffney 793 check return code of checklist() call in "Manual" section
641 agaffney 794 *actually* fix the first problem
642 agaffney 792
643 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
644     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
645     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
646    
647 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
648     src/GLIArchitectureTemplate.py:
649     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
650    
651 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
652     Add CDATA support to SimpleXMLParser and add utility functions for it.
653    
654 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
655     src/GLIArchitectureTemplate.py:
656     Fix case where vixie-cron is specified as a full package atom, as we still
657     don't want to run 'crontab /etc/crontab' for it.
658    
659 agaffney 788 *GLI-0.1 (3 Aug 2005)
660    
661 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
662     add scp to list of is_uri() so GenDialog doesn't complain.
663 codeman 769 fixed livecd-kernel bug in bootloader code.
664 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
665     change bootloader to allow for both initrd and initramfs.
666 codeman 777 fix IP for dynamic_stage3.
667 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
668 codeman 777
669 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
670     Added full scp:// URI support to get_uri() in GLIUtility
671 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
672     Remove print statement from scp:// code.
673 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
674 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
675 agaffney 770 Check to make sure pkg can be split on / and some debugging code
676 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
677 codeman 777 SimpleXMLParser handles True/False/None correctly now
678 agaffney 778 Comment out above fix
679 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
680 codeman 764
681 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
682     Removed a FIXME in the GLIClientConfiguration that is no
683     longer needed.
684    
685 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
686     Default to x86 in ClientConfig
687 agaffney 761 Typo in build-a-stage3 code.
688     Remove MAKEDEV call in build-a-stage3 postscript.
689 agaffney 760
690 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
691     Rewrote init of IP for gli-d. Other GenDialog updates.
692     allow network_type to be None in CConfig.
693    
694 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
695     Add _dynamic_stage3 option to IP.
696     Add check for that option to dynamic stage3 code in ArchTemplate.
697 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
698     Fix serialization of dns-servers in ClientConfig.
699 agaffney 755
700 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
701     changed default values of cron/logger in IP.
702     moved GenDialog IP init out to the individual files. gli-dialog's version
703     will change quite a bit.
704    
705 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
706     added ppcArchTemplate. blank now. working on yaboot.
707 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
708     skeleton implementation of _configure_yaboot.
709     small fixes to other templates.
710 codeman 750
711 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
712     GenDialog updates. changed comment in IP.
713    
714 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
715 robbat2 743 src/GLIInstallProfile.py:
716     Fix codeman's screwup of changing the service seperator to ',' in the parser
717     without changing it in the serialization code! Also document this in a
718     comment so you find it easier. Everybody needs to make sure they update
719     their install profiles!
720    
721     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
722 robbat2 742 src/GLIArchitectureTemplate.py:
723     Fix casting of list to string and concat of None with string, as well as
724     commented prototype of checking that mounting actually worked (found a case
725     where mount can return success, but the mount won't be done).
726    
727     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
728 robbat2 740 src/templates/x86ArchitectureTemplate.py:
729 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
730     checking for the device, and sleeping 1 second each time.
731    
732     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
733     src/templates/x86ArchitectureTemplate.py:
734 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
735     bootloader works again. Also rename _install_{grub,lilo} to
736     _configure_{grub,lilo} since they don't install the loaders anymore
737     themselves.
738    
739 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
740     fix global USE flags to not include the arch types at the end.
741     updates to GenDialog and gli-d.
742    
743 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
744     fixing bootloader code for no initrd and initrd->initramfs naming change.
745    
746 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
747     Proper comments and parameters to GLIException in install_mta()
748 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
749 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
750     list_tarball_from_mirror() to eliminate blank last item.
751 agaffney 733
752 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
753     Added stage3 generation code.
754    
755 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
756     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
757     Mild changes to GenDialog.
758    
759 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
760     Remove separate install step configure_rc_conf() since it's handled by
761     update_config_files()
762     Make a copy of newvalues in _edit_config() so quotes aren't added when the
763     function is called twice on the same file.
764    
765 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
766     Missing \ in sed in _get_packages_to_emerge()
767 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
768 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
769     _get_packages_to_emerge()
770 agaffney 726
771 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
772     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
773     in the dialog.py gauge code.
774    
775 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
776     Add code to update_config_files() to go through etc_files and update stuff.
777 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
778 agaffney 724 Only use float() in partition xml parsing code if type == "free"
779 agaffney 720
780 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
781     finished almost all internationalization of GenDialog.
782 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
783 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
784 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
785 codeman 718
786 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
787     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
788    
789 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
790     fix extra entry in list_mirrors()
791     beginning internationalization runthrough.
792    
793 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
794     added dialog.py to /src temporarily until it gets accepted upstream.
795 codeman 714 fix for unused value in form in dialog.py and changed heights.
796     fix GenDialog forms.
797 codeman 713
798 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
799     Changed hostname/domainname for new baselayout.
800     Changed _add_to_runlevel errors to logs.
801     Updated TODO list to show status of GenDialog
802     More updates to GenDialog including two checklists that probably won't work.
803 codeman 711 update IP to use comma-separated list instead of space separated for services.
804 codeman 710
805 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
806     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
807     GenDialog as it gets closer to completion.
808    
809 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
810 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
811     instead of int() in add_partition_device_partition() for minor (closes 96804)
812 agaffney 704
813     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
814     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
815     instead of 'interfaces[interface][1]' since DHCP uses that field for its
816     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
817    
818 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
819 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
820 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
821 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
822 agaffney 704 Fix undefined variable 'output' issue in spawn().
823 agaffney 697
824 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
825     More updates to GenDialog and gli-d.
826    
827 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
828     Modify list_mirrors() to return a list of mirror URL/name pairs.
829    
830 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
831     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
832     get subarch.
833    
834 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
835     Backend partitioning will create disklabel is none exists. Installprofile
836 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
837     mount_local_partitions() to remember device along with minor in the
838 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
839     add else block to log unsupported netmount types to mount_network_shares()
840 agaffney 691
841 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
842     src/GLIArchitectureTemplate.py:
843 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
844     src/fe/cli/clife.py:
845     Logging system.
846     src/GLIUtility.py, src/GLIStorageDevice.py:
847     Add comments about re-writes needed for boxes without sysfs.
848    
849     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
850     src/GLIArchitectureTemplate.py:
851 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
852     'make dep' call for custom compile. build_mode support for prepare-only and
853     none types completed. custom compile function chains shell functions in
854     spawned script, to allow for catching all errors.
855    
856 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
857     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
858     and GenDialog. other gendialog updates as well. kernel updates untested.
859    
860 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
861     src/GLIInstallProfile.py:
862     Change structure of etc-portage stuff. The serialization was broken before my
863     last commit, and I am the only person that's ever used it. The new schema is
864     as follows:
865     <etc-portage>
866     <file name="package.mask"/>
867     <file name="package.unmask">
868     <entry atom="sys-kernel/openmosix-sources"/>
869     </file>
870     <file name="package.use">
871     <entry atom="sys-libs/db">
872     -java
873     </entry>
874     <entry atom="dev-libs/cyrus-sasl">
875     -ldap
876     </entry>
877     </file>
878     </etc-portage>
879    
880    
881 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
882     src/GLIInstallProfile.py:
883     Add new entry for gli-profile/kernel-build-method item. Add missing
884     serialize_etc_portage (temporary). Make serialize_make_conf always print the
885     keys in the same order.
886    
887 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
888     src/GLIArchitectureTemplate.py:
889 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
890     was repeatedly appended to make.conf.
891    
892     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
893     src/GLIArchitectureTemplate.py:
894 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
895     successfully mounted swap device for using swapoff. Add proper error checking
896     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
897     'file'. Clean up some redundant code (thanks to pychecker).'
898    
899 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
900 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
901 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
902     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
903 agaffney 668
904 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
905     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
906     in add_network_interface.
907    
908 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
909     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
910     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
911 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
912     prepare_chroot.
913 robbat2 664
914 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
915     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
916     +src/fe/installer-gtk:
917     Add new automated CLI frontend. Add scripts that are the intended means to
918     use each frontend.
919    
920 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
921 robbat2 663 src/GLIClientController.py:
922     Add null type to network config, for cases where the interface is already up
923     and should not be touched (netboot for example).
924    
925     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
926 robbat2 652 src/GLIArchitectureTemplate.py:
927 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
928     string!. Try to use binary packages if available by default.
929    
930     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
931     src/GLIArchitectureTemplate.py:
932 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
933     actually exists before we try to add it. set_services phase must take place
934     after the package installation, otherwise the init scripts might not exist.
935     Find the correct init script for the cron and logging daemons, and add that
936     instead of the package atom.
937    
938     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
939     src/GLIArchitectureTemplate.py:
940 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
941     usage of 'file' to 'contents' for the variable name, as it shadows
942     __builtin__.file.
943    
944     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
945     src/GLIArchitectureTemplate.py:
946 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
947     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
948     for 'none' kernel config for build_kernel phase. Put kernel_script in
949     /var/tmp instead of /root for build_kernel phase.
950    
951 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
952     Rename mta variables to match syslog/cron variables.
953    
954 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
955 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
956     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
957     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
958     src/templates/.cvsignore, src/tests/.cvsignore:
959     Refactor partition formatting again to include error checking. Allow 'none'
960     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
961    
962     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
963 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
964     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
965     only have a single spawn call.
966    
967 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
968     refixed samyron's fix of set_architecture_template.
969    
970 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
971     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
972     be executable.
973    
974 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
975     Fixed one of the FIXME's in the ClientConfiguration. There is now some
976     error checking when you call set_architecture_template.
977    
978 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
979     moved the mkfsopts input to the partition options menu instead of the during
980     the creation process. updated GenDialog to say it supports reiserfs v3.
981    
982 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
983     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
984     Complete support for 'mkfsopts' parameter in main system and dialogfe.
985     Add support for other partition types to dialogfe.
986     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
987     avoid integer overflows and wraparounds.
988    
989 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990     Removed start/end from XML output and added mkfsopts to partitioning info.
991 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
992 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
993 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
994     partitioning. Fix free space overwriting bug. Remove a few unused functions
995 agaffney 640 from rewrite. Fix call to get_partition_at()
996 agaffney 631
997 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
998     Updates to GenDialog and dialogfe.
999    
1000 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1001 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1002 agaffney 627
1003 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1004     more GenDialog updates to partitioning.
1005    
1006 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1007     Indenting issue in GLISD/get_ordered_partition_list.
1008     updates to GenDialog partitioning and added default UTC for timezone in IP.
1009    
1010 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1011     Added GLISD.get_model()
1012    
1013 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1014     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1015     More updates to GenDialog :)
1016    
1017 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018     Added get_interface_realname() function.
1019    
1020 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1021     Added auto-save of CConfig and copying to new /root after install.
1022     yet even more GenDialog updates.
1023    
1024 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1025     removed print statement from GLISD. more updates to GenDialog.
1026    
1027 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1028 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1029 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1030 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1031     places in GLIClientConfiguration.
1032 agaffney 608
1033 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1034     Fix mount_local_partitions(), configure_fstab(), and
1035 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1036 agaffney 601 A few more fixes for templates/x86Archtemplate
1037 agaffney 599
1038 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1039     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1040     a work in progress.
1041    
1042 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1043     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1044     directly. GLISD can now handle data imported from XML.
1045    
1046 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1047     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1048     handle blank (no disklabel) disks.
1049    
1050 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1051     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1052     up, documented, and separated out serialization and grouped all sections.
1053    
1054 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1055     Reorganization of ClientConfiguration and gutting of unused functions.
1056     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1057    
1058 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1059     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1060    
1061 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1062 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1063 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1064     copies it into /mnt/gentoo/root
1065 agaffney 588
1066 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1067     Moved URI parsing into new function parse_uri()
1068    
1069 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1070     Added XMLParser module.
1071    
1072 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1073     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1074 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1075 agaffney 580
1076 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1077     Updated finishing_cleanup for new unmounting method from agaffney.
1078    
1079 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1080 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1081 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1082     unicode support to is_realstring().
1083 agaffney 575
1084 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1085 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1086 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1087 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1088     instead of --nocolor.
1089 agaffney 571
1090 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1091     Added GLIGenDialog.py to make a generic class for the dialog functions that
1092 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1093     date changes. 2004->2005.
1094 codeman 566
1095 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1096     Removed 'quiet=True' from spawn() calls
1097    
1098 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1099     Updated GLIUtility with patches from chotchki. Also added documentation
1100    
1101 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1102     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1103     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1104     from bug #89683, mostly touchups.
1105    
1106 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1107     GLIStorageDevice cleanup patch from bug #91761
1108    
1109 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1110     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1111 agaffney 553 _edit_config(). Error logging casts 'error' to str
1112 agaffney 551
1113 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1114 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1115     code to CC to handle exceptions *not* thrown by the installer itself.
1116 agaffney 548
1117 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1118     get_max_mb_for_resize() returns -1 if not self.resizeable
1119    
1120     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1121 agaffney 539 More dirty rsync hacks :-/
1122    
1123 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1124     Patches from chotchki (bug #90325) to improve CC networking. untested.
1125    
1126 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1127 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1128 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1129 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1130 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1131 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1132     _get_packages_to_emerge()
1133 agaffney 528
1134 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1135     Added group-adding code to set_users in ArchTemplate
1136    
1137 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1138     Added post-install script code
1139    
1140 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1141     Fixed encapsulation issues in GLIClientController (bug #90141)
1142    
1143 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1144     Update resizing code in GLIStorageDevice
1145    
1146 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1147     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1148    
1149 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1150     Reverted change to ArchTemplate and added support for commented line in old
1151     code.
1152    
1153 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1154     Changed _edit_config() to modify value in-place instead of commenting out and
1155     adding the new value to the end of the file.
1156    
1157 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1158     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1159     Also updated TODO list.
1160    
1161 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1162     Use blackace's one-liner to add comments for all function for use with
1163     pythondoc.
1164    
1165 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1166     Moved 'end >= device_sectors' check out of loop to check for next partition's
1167 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1168 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1169     point of logical is now adjusted along with start.
1170 agaffney 503
1171 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1173 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1174     key in partition information due to new partition code leaving them as float.
1175 agaffney 497
1176 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1177 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1178 agaffney 494
1179 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1180     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1181    
1182     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1183 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1184    
1185 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1186 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1187     sed to properly strip out junk.
1188 agaffney 481
1189 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1190 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1191 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1192 codeman 475
1193 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1194     Fixed indent problem in GLICController
1195    
1196 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1197     Check for disklabel type "loop" and use the device name without a minor.
1198    
1199 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1200     Remove /tmp/compile_output.log and /var/log/install.log when install is
1201 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1202 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1203 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1204 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1205 agaffney 453
1206 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1207 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1208     when unpacking tarball.
1209 agaffney 451
1210 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1211 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1212     filesystem_tools code.
1213 codeman 443
1214 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1215     Changed the print statements to logging in the partitioning BE code.
1216     the logger may need to be imported to the x86archtemplate. unknown yet.
1217 codeman 432 Added the finishing_cleanup function.
1218 codeman 433 added a fix to the logger from BenUrban
1219 codeman 427
1220 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1221     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1222     URIs. The blank uri check has been commented out.
1223 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1224 codeman 422
1225 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1226     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1227    
1228 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1229     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1230 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1231 agaffney 415
1232 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1233     small changes to setup_network_post. moved adding to runlevel of net.x to
1234     after the device gets symlinked. added domainname runlevel command.
1235    
1236 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1238 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1239     spawn() call in livecd-kernel code to pass environment variables.
1240 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1241     the install profile if available.
1242 agaffney 402
1243     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1245     to handle installing the livecd kernel into the new system.
1246    
1247 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1248     should emerge hotplug and coldplug before adding them to runlevel.
1249    
1250 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1251 codeman 395 took chroot out of grub_install command.
1252    
1253     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1254     Changed chroot wrapper code in spawn() to write the wrapper the python way
1255     instead of the bash way to avoid quote conflicts. Added
1256 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1257 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1258     as it breaks the piping.
1259 codeman 390
1260 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1261     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1262    
1263 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1264     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1265 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1266 agaffney 389 GLIInstallProfile.
1267 agaffney 385
1268 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1270     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1271     into /mnt/gentoo in prepare_chroot()
1272 agaffney 379
1273 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1274     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1275 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1276     to start/end sectors
1277 agaffney 375
1278     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1279 agaffney 374 Add 2>&1 to cmd in spawn()
1280    
1281 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1282     Modified GLIUtility.exitsuccess() to work with return value from
1283 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1284     creates wrapper script for commands run inside chroot so multiple commands
1285 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1286     for the generated script from spawn()
1287 agaffney 369
1288 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1289     Removed default values for stage tarball URI and portage tree URI from
1290     InstallProfile. These should be set by the FEs. also added services step to
1291     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1292     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1293    
1294 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1295     Small fix for setting the default gateway. Also added feature to dialogfe.
1296    
1297 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1299    
1300 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1301 codeman 346 Fixed a bunch of true -> True typos. lots of em
1302 codeman 347 only write new resolv.conf if there are dns servers listed.
1303 codeman 345
1304 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1305     Commented out 'display_on_tty8=True' in start_portmap()
1306    
1307 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1308     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1309    
1310 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1312     lang parameter to __init__()
1313 codeman 331
1314     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1315     updates to TODO list.
1316 esammer 4
1317 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1319     'emerge -p blah'
1320 agaffney 322
1321 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1322 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1323     added quickpkg to TODO list
1324 codeman 319
1325 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1326     Changed the raising of 'warning' exceptions to a simple log of the error
1327     so that the installer can continue.
1328    
1329 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1330     Some big changes. First, changed most output to display_on_tty8.
1331     Second, added log lines to all templates. Some smaller fixes such as typos.
1332     Also did some cleanups of old commented lines.
1333    
1334 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1335 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1336 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1337 agaffney 310
1338 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1339     more updates to TODO list. hopefully we'll soon start removing items instead
1340     of adding them.
1341    
1342 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1343     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1344    
1345 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1346 codeman 295 updated TODO list. (again)
1347 codeman 293
1348 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1349     changed output of portmap start to display_on_tty8.
1350     fixed bootloader for udev and multiple kernels
1351 codeman 288 fixed custom kernel config (again)
1352 codeman 286
1353 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1354     changed default value of CC._enable_ssh to True because this is smart.
1355 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1356 codeman 281
1357 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1358     partition() now waits until after it checks for partition flags before delete
1359     the partitions :P
1360    
1361 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1363 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1364     blank.
1365 agaffney 271
1366 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1367     Various fixes related to the add_users function. Still not yet finished.
1368 codeman 269 Added things to the TODO list. Lets start using that!
1369 codeman 268
1370 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1371     Added code to x86Template to format newly created partitions. Also added
1372 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1373 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1374     mounting code.
1375 agaffney 264
1376 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1377     Took out unnecessary setting of random livecd root password. the cd already
1378     sets it randomly.
1379    
1380 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1381     Took out an unneeded step from CC's run()
1382    
1383 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1384     Attempt at detecting and adding windows partitions to lilo.
1385    
1386 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1387 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1388     partition. fixed misc exit_status => exitstatus typo.
1389 codeman 235
1390 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1391 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1392     resizing ntfs and ext2/3.
1393 agaffney 230
1394 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1395     Fixed partition() in x86Template so that it scans through logicals and deletes
1396 agaffney 229 before deleting containing extended partition. Also clears partition table to
1397     be safe before third pass.
1398 agaffney 228
1399 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1400     Added mount_network_shares. not able to test it from this computer.
1401     will test when i get back to school.
1402     also added start_portmap to the client_controller as an always-do.
1403     agaffney says this is needed for NFS mounts to work.
1404    
1405 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1406     Partial rewrite of partitioning code in x86Template. No longer shells out to
1407     parted to perform actions, now uses all pyparted calls. Code "works" in a
1408     test, but still needs lots of TLC. Also modified tests/install.py to work
1409     with x86Template and GLIClientConfiguration.
1410    
1411 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1412     Initial move of partitioning code from ArchTemplate to x86Template.
1413 agaffney 220
1414 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1415 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1416 codeman 222
1417     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1418 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1419     Test Install ran very well (skipping partitioning).
1420    
1421 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1422 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1423 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1424     some may still have eluded me.
1425 codeman 215
1426     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1427 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1428     Just finished mount_local_partitions in GLIArchitectureTemplate
1429    
1430 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1431     Added get_num_sectors() to GLIStorageDevice.
1432    
1433     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1435 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1436     from GLIInstallProfile.
1437 agaffney 205
1438 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1439     GLIStorageDevice returns "unknown" instead of "" for get_type()
1440    
1441 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1442 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1443     actually work. Commented out resizability checking code for speed.
1444 agaffney 183
1445 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1446     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1447     GLIStorageDevice at the suggestion of plors
1448    
1449 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1450     Added a function to GLIUtility to pull a value from a make.conf-style config
1451 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1452 agaffney 162
1453 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1454 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1455     network mounts from partition data structure in GLIInstallProfile
1456 agaffney 161
1457 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1458     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1459     can be resized.
1460    
1461 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1462     Added some of the final functions to GLIInstallTemplate.
1463     Yes this project is still active despite rare use of the Changelog!
1464    
1465 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1466     Added the GLIPartitionTools.py file. This is a temporary insertion of
1467     partitioning tools that will eventually go into their own package.
1468    
1469 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1470     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1471     for the program). Added __init__(install_profile, client_configuration) to
1472     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1473     to avoid constantly passing stuff every time we call a method.
1474    
1475 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1476    
1477     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1478     files without messing up all the other stuff in them. This will be used for making
1479     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1480    
1481 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1482    
1483     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1484     have a few basic things. I added two private methods. One is _depends(). This
1485     will be used for dependency checking (ie. unpacking a tarball requires that
1486     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1487     same syntax as os.system(), however, instead of being run in the liveCD
1488     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1489     isolated the code. Hope to work more this week to get this class formed...
1490    
1491 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1492    
1493     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1494     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1495     to allow for easier modification (mutable, rather than immutable objects). Updated
1496     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1497     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1498     Added initial unit test code.
1499    
1500 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1501    
1502     Added initial changelog. Setting up the basic structure of the CVS repository
1503     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1504     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20