/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1185 - (hide annotations) (download)
Sun Dec 25 05:06:35 2005 UTC (8 years, 6 months ago) by agaffney
File size: 62842 byte(s)
remove calls to portage module

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1185 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.545 2005/12/25 05:06:35 agaffney Exp $
5 codeman 773
6 agaffney 1033 *GLI-0.3 (27 Oct 2005)
7 agaffney 791
8 agaffney 1184 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     use separate script for GRP deps
11 agaffney 1185 remove calls to portage module
12 agaffney 1184 src/runtimedeps.py:
13     initial commit
14    
15 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
16     src/GLIPortage.py:
17     initial commit
18 agaffney 1182 move some of portage function from GLIAT
19 agaffney 1183 flipped around a few function args
20 agaffney 1182 src/GLIArchitectureTemplate.py:
21     revamp install_packages() for new GLIPortage
22 agaffney 1181
23 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
24     src/GLIArchitectureTemplate.py:
25     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
26    
27 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
28     src/net/server/gliserv.py:
29     wrap generated code in a class to isolate it a bit better
30     302 redirects work
31 agaffney 1179 don't use cgi.escape() for <% %>
32 agaffney 1177 src/net/server/html/webgli/*:
33     load/save profile
34 agaffney 1178 src/GLIUtility.py:
35     change /sbin/lspci to just lspci
36 agaffney 1176
37 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
38     src/GLIClientController.py:
39     change ordering of statements in CC run() while loop to not go past the end
40     of the array
41 agaffney 1173 src/GLIArchitectureTemplate.py:
42     removed redundant bind mounts
43 agaffney 1172
44 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
45     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
46 codeman 1171 added a diagram by blackace from last night.
47     added the glossary in RTF format.
48 codeman 1170
49 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
50     x86AT: separated out emerge/configure from running of bootloader
51     added MBR drive support to lilo.
52     these changes will likely not work.
53     AT: added setup_and_run_bootloader step.
54    
55 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
56     src/net/server/gliserv.py:
57     call generated code in a function
58     src/net/server/html/webgli/*:
59     include top/bottom
60 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
61     src/GLIClientCongifuration.py:
62     install mode magic
63 agaffney 1163
64 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
65     src/GLIClientController.py:
66     use GLIException when there's an import problem
67 agaffney 1159 added debug code to show install_steps
68 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
69     add . to import path
70 agaffney 1160 proper path this time: ../../templates
71 agaffney 1162 src/GLIArchitectureTemplate.py:
72     add _portage_best_version() function
73 agaffney 1156
74 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
75     added initial glossary and gimli diagram to the docs directory.
76 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
77 codeman 1154
78 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
79     src/net/server/html/webgli/:
80     converted globaluse, localuse, networkmounts, portagetree, and stageselection
81 agaffney 1150 moved saveclientconfig stuff into clientconfig
82 agaffney 1151 moved saveconfigfiles into config files
83     converted etc_portage and makedotconf
84 agaffney 1152 converted bootloader and kernel
85 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
86 agaffney 1151 src/net/server/gliserv.py:
87     proper 404 handling for .pyhtml extension
88     HTML escape <% %> stuff
89 agaffney 1152 work around python's sucky regexes
90 agaffney 1153 src/GLIInstallProfile.py:
91     allow set_{rsync,ftp,http}_proxy() to accept empty values
92 agaffney 1149
93 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
94     src/net/server/gliserv.py:
95 agaffney 1148 initial commit of Legolas templating engine
96     302 redirects
97 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
98     minor changes for new code
99     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
100     initial commit of the conversion from the monolithic WebGLIHandler.py to the
101 agaffney 1148 one file per path Legolas goodness
102     partitioning[2-4] done
103 agaffney 1147
104 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
105     webgli: dhcp options in CC and post-install.
106     updated comparison chart.
107 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
108 codeman 1145
109 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
110     webgli_template.html: valign=top on left side.
111     webgli: fix bootloader boot_device. now working.
112 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
113 agaffney 1138
114 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
115     src/net/server/webgli_template.html:
116     increase padding for content cell to 7px and add colspan=2
117    
118 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
119     webgli: added graphic bar on top
120     webgli: added hover effects on the links on the left
121     webgli: re-rendered header_bg.png to stretch without artifacts
122    
123 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
124     webgli: make.conf disabling fixes for dynamic_stage3
125     fixed portage snapshot browse popup
126     all changes tested.
127     webgli: add debug mode to CC screen. the screen still needs lots of work.
128    
129 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
130     added debug mode question to gli-dialog
131     added CC proxies to CC networking for gli-dialog
132 codeman 1125 webgli: fixed skip CC networking if connection active
133     webgli: portage snapshot defaults to CD
134     webgli: bootloader mbr drive selection
135     webgli: USE flags unselectable if dynamic_stage3
136     webgli: manual extra packages and save button.
137    
138 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
139     src/GLIUtility.py:
140     change ping count to 2
141 agaffney 1121 docs/comparison.html
142     initial commit
143 agaffney 1119
144 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
145     src/templates/x86ArchitectureTemplate.py:
146     fix map() issue with grub code
147     replace kernel_names and initrd_names loops with one-liners
148    
149 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
150     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
151 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
152 codeman 1106 failure cleanup now an option for gli-dialog.
153 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
154     added comparison list and updated TODO!
155 codeman 1102
156 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
157     src/GLIArchitectureTemplate.py:
158     fix to stage1() debug code
159 agaffney 1098 fix to stage2() debug code
160 agaffney 1097
161 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
162     some more bootloader code fixes. forgot boot_device != mbr_device.
163 agaffney 1097
164     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
165     src/GLIStorageDevice.py:
166     fix to unallocated space merging when last one is after part 4
167 codeman 1096
168 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
169     src/GLIArchitectureTemplate.py:
170     small fix to debugging code in copy_pkg_to_chroot()
171    
172 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
173 codeman 1096 more bugfixes with bootloader code
174     gli-dialog side appears to work
175 codeman 1086
176 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
177 codeman 1080 initial adding of boot_device to backend.
178     initial boot_device support added to gli-dialog.
179 codeman 1096 some fixes of my poor coding
180 codeman 1077
181 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
182 codeman 1075 converted gli-dialog to use the install_package_list.
183     gtkfe has already been converted by AllanonJL
184 codeman 1076 new way working in gli-dialog now and added to webgli.
185 codeman 1077 added set/get_boot_device() to IP
186 codeman 1075
187 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
188     get_install_package_list added to InstallProfile. This can be used by the FEs
189    
190 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
191     src/templates/x86ArchitectureTemplate.py:
192     call ls with '-1 --color=no'
193    
194 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
195 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
196 codeman 1069
197 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
198     src/GLIArchitectureTemplate.py:
199     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
200     confused
201    
202 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
203     removed protocols from rc.conf screens
204     finished initial rc.conf and make.conf in webgli
205    
206 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
207     src/net/server/gliserv.py:
208     add -h option to usage()
209 agaffney 1063 show time and request URI in debug mode
210 agaffney 1064 show client IP in debug mode
211 agaffney 1065 just use IP instead of trying to do a reverse lookup
212 agaffney 1062
213 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214     src/net/server/gliserv.py:
215     'classier' 401 message
216     proper commandline parsing
217     help via -h
218     user/pass can be specificed via commandline option
219    
220 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
221 agaffney 1057 src/net/server/gliserv.py:
222 agaffney 1059 basic HTTP auth
223    
224     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
225     src/net/server/gliserv.py:
226 agaffney 1057 dynamic module reloading (yipee!)
227 agaffney 1058 send 'Last-Modified' header for real files
228     respond to HEAD with just headers
229 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
230     icons for drives
231    
232 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
233     src/net/server/handlers/WebGLIHandler.py:
234     initial 'pretty' partition table display support
235 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
236 agaffney 1044 radio buttons and pretty display work together
237     META redirect instead of javascript
238     pretty display stretches across entire screen
239 agaffney 1046 'Recommended layout' and 'Clear drive' functions
240 agaffney 1047 properly catch exceptions from do_recommended()
241 agaffney 1049 src/GLIArchitectureTemplate.py:
242     replace preinst, copy, postinst, rm steps with qmerge
243 agaffney 1050 whoops...that shouldn't have been commented out
244 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
245 agaffney 1052 more generic of symlink crappiness
246 agaffney 1053 new copy_pkg_to_chroot() actually works now
247 agaffney 1042
248 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
249     src/GLIStorageDevice.py:
250     initial generic disk support
251 agaffney 1040 fixes for add_partition() code
252 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
253     added support for creating generic disks
254 agaffney 1040 add new partition working
255 agaffney 1041 save and delete partitions
256 agaffney 1037
257 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
258     webgli: Partitioning making progress.
259    
260 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
261     src/GLIArchitectureTemplate.py:
262     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
263     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
264     dir) and works around /etc/gconf symlink problem
265    
266 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
267     webgli: lots of updates. preliminary partitioning. extra packages works.
268    
269 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
270     src/net/server/gliserv.py:
271     httpd now supports HTTPS and falls back to HTTP if not available
272 agaffney 1030 make fallback actually work
273 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
274     SecureSocketServer is now threaded
275    
276 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
277     src/net/client/gliclient.py:
278     try to use HTTPS for XMLRPC first and fallback to HTTP
279 agaffney 1028 pretend mode
280 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
281     HTTPS XMLRPC goodness from samyron
282 agaffney 1028 pass name of certificate
283 agaffney 1026
284 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
285     wegli: daemons and services screens done.
286    
287 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
288     webgli: networking and users screens
289     added return_redirect to handler.py
290 codeman 1022 loading and saving install/client profiles works for webgli now
291     Review also done
292 agaffney 1033
293     *GLI-0.2 (27 Oct 2005)
294 codeman 1025
295 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
296     src/templates/x86ArchitectureTemplate.py:
297     properly check for bootloader emerge exist status with exitsuccess()
298 agaffney 1010 log output of grub install command
299 agaffney 1011 add --batch --no-floppy to grub command
300 agaffney 1013 grubinstallstring only gets logged if debug is on
301 agaffney 1012 src/GLIUtility.py:
302     update progress bar to 100% when process finishes
303 agaffney 1009
304 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
305     src/GLIClientController.py:
306     added debugging code for the interaction between the 2 threads via Event()
307 agaffney 1003 src/GLIUtility.py:
308     doubled the buffer size in spawn()
309 agaffney 1004 bump buffer size up to 16384
310     only report progress in 5% increments
311 agaffney 1005 src/GLIArchitectureTemplate.py:
312     kernelpkgs.txt support code
313 agaffney 1006 above disabled because it sucks
314 agaffney 1007 added add_pkg_to_world()
315 agaffney 1002
316 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
317     src/GLIArchitectureTemplate.py:
318     use tar | tar to copy files in copy_pkg_to_chroot()
319     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
320    
321 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
322     DEBUGGING ADDED TO AT. verbose field added to CConfig.
323    
324 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
325     src/net/server/gliserv.py:
326     / maps to index.html
327     look for actual files in html/
328     src/net/html:
329     new template
330 agaffney 998 src/GLIUtility.py:
331     added parse_vdb_contents()
332     src/GLIArchitectureTemplate.py:
333     added copy_pkg_to_chroot()
334     added debug code to dynamic-stage3
335 agaffney 999 switch dynamic-stage3 to new method
336     lots of bug fixes from adding debug code
337 agaffney 993
338 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
339     webgli initial bootloader support + changed make.conf.
340 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
341 codeman 983
342 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
343 agaffney 982 src/GLIUtility.py:
344 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
345 agaffney 981 add unpack progress to portage snapshot
346 agaffney 982 use read() instead of readlines() in spawn()
347     only update progress bar for whole percents
348 agaffney 980
349 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
350     src/templates/x86ArchitectureTemplate.py:
351     change call to 'grub' to use GLIUtility.exitsuccess()
352 agaffney 977 add definition of 'build_mode' in _configure_lilo()
353 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
354     fix so subshell is called in root shell
355    
356 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
357     src/net/server/handlers/WebGLIHandler.py:
358     stage screen launches URI browser in sized window with various properties set
359    
360 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
361     src/misc/updategtkfe:
362     updated to actually work
363 agaffney 972 remove previous snapshot and extracted dir before downloading
364 agaffney 973 src/misc/updateglid:
365     updated to actually work
366 agaffney 974 src/templates/x86ArchitectureTemplate.py:
367     fixed bug where grub code was looking for 'root+root+file_name2'
368 agaffney 971
369 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
370     src/net/server/handlers/WebGLIHandler.py:
371     URI browser
372 agaffney 970 added mirror selection
373 agaffney 969 src/GLIUtility.py:
374     ls via ssh strips off ending *
375 agaffney 968
376 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
377     more updates to webgli. stage selection.
378    
379 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
380     updated webgli with preliminary Network Mounts support.
381    
382 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
383     GenDialog: string formatting and yes/no label fixes.
384     added WebGLI template for gliserv.py
385     added WebGLIHandler as well as a definition for it in gliserv.py
386     updates to the webgli files even though they won't be there for long.
387 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
388     goes public.
389 codeman 952
390 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
391     src/net/server/gliserv.py:
392     override dict to not be so anal
393 agaffney 949 main server now loads separate module to handle requests
394 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
395 agaffney 949 split out profile URLs into separate handler function
396 agaffney 950 move handlers into subdirectory
397 agaffney 956 add Welcome and Clients handlers
398 agaffney 949
399 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
400     src/GLIUtility.py:
401     raise exception if password prompt received twice
402    
403 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
404 agaffney 944 src/GLIUtility.py:
405 agaffney 943 removed rot13ify()
406    
407     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
408 agaffney 935 src/net/server/gliserv.py:
409     allow for param to be passed multiple times in GET
410 agaffney 940 no XMLRPC functions return None
411 agaffney 941 modify POST request parsing to only create a list if needed
412 agaffney 942 fix GET request parsing so the list creation for multiple values works
413 agaffney 940 src/net/client/gliclient.py:
414     various typo and type mismatch fixes
415     exit after exception
416 agaffney 935
417 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
418     src/net/client/gliclient.py:
419     initial commit
420 agaffney 934 pass MAC to XMLRPC functions
421     src/net/server/GLIServerProfile.py:
422     rename GLIClientsProfiles to GLIServerProfile
423 agaffney 933
424 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
425     src/net/server/gliserv.py:
426     now handles POST requests
427     move majority of request handling code to common_handler() to reduce code
428     duplication
429 agaffney 931 profile loading
430     client reg via XMLRPC goes into SharedInfo()
431     /showclients redesign
432     template fixes
433 agaffney 932 allow handler functions to add/change headers
434     save profile
435 agaffney 930
436 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
437     src/net/server/GLIClientsProfiles.py:
438     initial commit
439     src/net/server/template.html:
440     initial commit
441     src/net/server/gliserv.py:
442     add template mojo
443    
444 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
445     src/net/server/gliserv.py:
446     XMLRPC mojo
447    
448 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
449     src/GLIArchitectureTemplate.py:
450     add code in _edit_config() to comment line where variable is defined
451     previously
452 agaffney 920 insert new line under previous definition of variable if it exists
453 agaffney 921 small _edit_config() cleanup
454 agaffney 923 src/GLIStorageDevice.py:
455     add clear_partitions() function
456 agaffney 924 new sizes for recommended partition layout
457 agaffney 925 automatically calculate swap size for recommended layout
458 agaffney 919
459 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
460     src/templates/x86ArchitectureTemplate.py:
461     fat16 mojo
462    
463 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
464     src/GLIStorageDevice.py:
465     prevent do_recommended() from being run twice
466 agaffney 916 rewrite do_recommended() to be more robust
467 agaffney 917 src/GLIArchitectureTemplate.py:
468     rework _edit_config() to not write duplicate entries
469 agaffney 914
470 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
471     src/GLIStorageDevice.py:
472     added do_recommended() function to automatically created 256M/1G/* layout
473    
474 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
475     src/gli-dialog.py: added set_distcc to the list
476     GenDialog: added set_distcc. untested.
477     IP: added install_distcc flag.
478     AT: added install_distcc function based on the flag. runs after build_kernel
479 codeman 911 changed AT spawn command for distcc for nodeps.
480 codeman 907
481 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
482     src/GLIUtility.py:
483     add rot13ify() function
484    
485 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
486     src/GenDialog.py
487 codeman 905 added a sentence of text. unchecking support added.
488 codeman 904
489 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
490     src/GLIUtility.py
491     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
492     src/GenDialog.py
493 codeman 902 still working on extra_packages. transformed the list to new format.
494     added GRP indication to list. untested.
495 codeman 901 TODO lists updated.
496     src/fe/dialog/gli-dialog.py
497     spelling mistook.
498    
499 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
500     src/GLIUtility.py:
501     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
502    
503 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
504     src/GLIUtility.py:
505     add get_directory_listing_from_uri()
506     add http support to above
507 agaffney 892 add ftp support to above
508 agaffney 893 add scp support to above
509 agaffney 891 src/GLIArchitectureTemplate.py:
510     "0" instead of 0 for key of single-element dict passed to _edit_config()
511 agaffney 889
512 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
513     value_only -> only_value
514    
515 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
516     gutted out all of etc_portage structure since it is now all handled by
517     etc_files
518    
519 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
520     src/GLIArchitectureTemplate.py:
521     install_packages() sends progress update notifications
522 agaffney 876 src/templates/x86ArchitectureTemplate.py:
523     increase sleep to 5s between format tries
524 agaffney 882 src/GLIClientController.py:
525     pass 'self' to AT instead of 'self._pretend'
526 agaffney 874
527 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
528     logger -> logger.log in x86AT
529    
530 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
531     added set_etc_portage to IP. debugging gli-d's support for it.
532    
533 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
534     src/templates/x86ArchitectureTemplate.py:
535     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
536    
537 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
538     src/GLIArchitectureTemplate.py:
539     add _portage_best_version() function and rework install_packages() to allow
540     for future X of Y tracking
541 agaffney 860 Use best_visible instead of best_version
542 agaffney 862 tracked down and fixed missing = causing empty install extra packages
543 agaffney 864 use = when emerging also
544 agaffney 865 quickpkg hokey pokey
545 agaffney 867 run _get_packages_to_emerge() again with -pk
546 agaffney 857
547 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
548     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
549     the end of install_packages.
550 codeman 850 added updateglid to /src/misc
551 codeman 851 updated all core files with new GPL notice and copyright statement.
552 codeman 848
553 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
554     src/GLIUtility.py:
555     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
556     a snapshot in /mnt/cdrom/snapshots/
557 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
558 agaffney 846 change calls to extra package special case functions to 'self.blah'
559 agaffney 839
560 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
561     src/ArchTemplate: changed "voodoo".
562 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
563     normal emerge sync fails.
564 codeman 836 removed get_sources_from_cd because it is obsolete.
565     add special cases to install_packages. remove fatal exception on package
566     install failure b/c the box will still be bootable.
567 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
568     handled in the FEs.
569 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
570     awaiting testing.
571 codeman 830
572 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
573     src/GLIStorageDevice.py:
574     global try/except block around fs resizable detection code
575 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
576     install-failed cleanup function
577 agaffney 826
578 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
579     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
580    
581 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
582 codeman 814 GLIGenDialog:
583     add drive choices for loaded configs.
584     force snapshot for dynamic_stage3
585     init the snapshoturi input to the cd snapshot if not already selected.
586     if dynamic_stage3, skip the make.conf step.
587     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
588     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
589 codeman 812
590 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
591     src/GLIArchitectureTemplate.py:
592     manually call MAKEDEV in stage3-dynamic code
593 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
594 agaffney 815 src/GLIUtility.py:
595     add beginning of validate_uri() function
596 agaffney 817 add file:/// support to validate_uri()
597 agaffney 822 single quotes when setting livecd password
598 agaffney 811
599 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
600     src/GLIGenDialog.py:
601     change getmountpoint() to get_mountpoint()
602 agaffney 808 src/misc/updategtkfe:
603     committed script to automatically download latest snapshot and run gtkfe
604 agaffney 809 src/templates/x86ArchitectureTemplate.py:
605     fix _configure_lilo_add_windows() for IP -> GLISD stuff
606 agaffney 810 src/GLIArchitectureTemplate.py:
607     give tmp_minor an initial value in mount_local_partitions so that the value
608     remain from the previous drive
609 agaffney 807
610 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
611     src/templates/x86ArchitectureTemplate.py:
612     Fix _configure_lilo() for IP using GLISD stuff
613 agaffney 806 src/GLIArchitectureTemplate.py:
614     install_cron_daemon() treats "none" specially
615 agaffney 805
616 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
617     old patch from Steven Mertens to resolve bug #96642
618 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
619     strings renamed for global use if necessary.
620 codeman 803 fix all three parts of bug 102291
621 codeman 804 disable set_etc_portage until fully-written.
622 codeman 801
623 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
624     src/GLIClientController.py:
625     lower-case http/ftp proxy envvars
626    
627 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
628     src/GLIClientController.py:
629     log end of pre_install steps to aid in debugging
630 agaffney 798 src/templates/x86ArchitectureTemplate.py:
631     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
632 agaffney 797
633 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
634     src/GLIArchitectureTemplate.py
635     check to make sure that the device node we're wait for to exist isn't of
636     type 'free'
637    
638 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
639     src/GLIGenDialog.py:
640     convert install_packages to list in set_extra_packages()
641 agaffney 793 check return code of checklist() call in "Manual" section
642 agaffney 794 *actually* fix the first problem
643 agaffney 792
644 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
645     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
646     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
647    
648 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
649     src/GLIArchitectureTemplate.py:
650     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
651    
652 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
653     Add CDATA support to SimpleXMLParser and add utility functions for it.
654    
655 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
656     src/GLIArchitectureTemplate.py:
657     Fix case where vixie-cron is specified as a full package atom, as we still
658     don't want to run 'crontab /etc/crontab' for it.
659    
660 agaffney 788 *GLI-0.1 (3 Aug 2005)
661    
662 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
663     add scp to list of is_uri() so GenDialog doesn't complain.
664 codeman 769 fixed livecd-kernel bug in bootloader code.
665 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
666     change bootloader to allow for both initrd and initramfs.
667 codeman 777 fix IP for dynamic_stage3.
668 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
669 codeman 777
670 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
671     Added full scp:// URI support to get_uri() in GLIUtility
672 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
673     Remove print statement from scp:// code.
674 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
675 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
676 agaffney 770 Check to make sure pkg can be split on / and some debugging code
677 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
678 codeman 777 SimpleXMLParser handles True/False/None correctly now
679 agaffney 778 Comment out above fix
680 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
681 codeman 764
682 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
683     Removed a FIXME in the GLIClientConfiguration that is no
684     longer needed.
685    
686 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
687     Default to x86 in ClientConfig
688 agaffney 761 Typo in build-a-stage3 code.
689     Remove MAKEDEV call in build-a-stage3 postscript.
690 agaffney 760
691 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
692     Rewrote init of IP for gli-d. Other GenDialog updates.
693     allow network_type to be None in CConfig.
694    
695 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
696     Add _dynamic_stage3 option to IP.
697     Add check for that option to dynamic stage3 code in ArchTemplate.
698 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
699     Fix serialization of dns-servers in ClientConfig.
700 agaffney 755
701 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
702     changed default values of cron/logger in IP.
703     moved GenDialog IP init out to the individual files. gli-dialog's version
704     will change quite a bit.
705    
706 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
707     added ppcArchTemplate. blank now. working on yaboot.
708 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
709     skeleton implementation of _configure_yaboot.
710     small fixes to other templates.
711 codeman 750
712 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
713     GenDialog updates. changed comment in IP.
714    
715 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
716 robbat2 743 src/GLIInstallProfile.py:
717     Fix codeman's screwup of changing the service seperator to ',' in the parser
718     without changing it in the serialization code! Also document this in a
719     comment so you find it easier. Everybody needs to make sure they update
720     their install profiles!
721    
722     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
723 robbat2 742 src/GLIArchitectureTemplate.py:
724     Fix casting of list to string and concat of None with string, as well as
725     commented prototype of checking that mounting actually worked (found a case
726     where mount can return success, but the mount won't be done).
727    
728     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
729 robbat2 740 src/templates/x86ArchitectureTemplate.py:
730 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
731     checking for the device, and sleeping 1 second each time.
732    
733     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
734     src/templates/x86ArchitectureTemplate.py:
735 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
736     bootloader works again. Also rename _install_{grub,lilo} to
737     _configure_{grub,lilo} since they don't install the loaders anymore
738     themselves.
739    
740 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
741     fix global USE flags to not include the arch types at the end.
742     updates to GenDialog and gli-d.
743    
744 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
745     fixing bootloader code for no initrd and initrd->initramfs naming change.
746    
747 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
748     Proper comments and parameters to GLIException in install_mta()
749 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
750 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
751     list_tarball_from_mirror() to eliminate blank last item.
752 agaffney 733
753 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
754     Added stage3 generation code.
755    
756 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
757     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
758     Mild changes to GenDialog.
759    
760 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
761     Remove separate install step configure_rc_conf() since it's handled by
762     update_config_files()
763     Make a copy of newvalues in _edit_config() so quotes aren't added when the
764     function is called twice on the same file.
765    
766 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
767     Missing \ in sed in _get_packages_to_emerge()
768 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
769 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
770     _get_packages_to_emerge()
771 agaffney 726
772 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
773     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
774     in the dialog.py gauge code.
775    
776 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
777     Add code to update_config_files() to go through etc_files and update stuff.
778 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
779 agaffney 724 Only use float() in partition xml parsing code if type == "free"
780 agaffney 720
781 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
782     finished almost all internationalization of GenDialog.
783 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
784 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
785 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
786 codeman 718
787 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
788     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
789    
790 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
791     fix extra entry in list_mirrors()
792     beginning internationalization runthrough.
793    
794 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
795     added dialog.py to /src temporarily until it gets accepted upstream.
796 codeman 714 fix for unused value in form in dialog.py and changed heights.
797     fix GenDialog forms.
798 codeman 713
799 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
800     Changed hostname/domainname for new baselayout.
801     Changed _add_to_runlevel errors to logs.
802     Updated TODO list to show status of GenDialog
803     More updates to GenDialog including two checklists that probably won't work.
804 codeman 711 update IP to use comma-separated list instead of space separated for services.
805 codeman 710
806 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
807     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
808     GenDialog as it gets closer to completion.
809    
810 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
811 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
812     instead of int() in add_partition_device_partition() for minor (closes 96804)
813 agaffney 704
814     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
815     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
816     instead of 'interfaces[interface][1]' since DHCP uses that field for its
817     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
818    
819 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
820 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
821 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
822 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
823 agaffney 704 Fix undefined variable 'output' issue in spawn().
824 agaffney 697
825 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
826     More updates to GenDialog and gli-d.
827    
828 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
829     Modify list_mirrors() to return a list of mirror URL/name pairs.
830    
831 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
832     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
833     get subarch.
834    
835 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
836     Backend partitioning will create disklabel is none exists. Installprofile
837 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
838     mount_local_partitions() to remember device along with minor in the
839 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
840     add else block to log unsupported netmount types to mount_network_shares()
841 agaffney 691
842 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
843     src/GLIArchitectureTemplate.py:
844 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
845     src/fe/cli/clife.py:
846     Logging system.
847     src/GLIUtility.py, src/GLIStorageDevice.py:
848     Add comments about re-writes needed for boxes without sysfs.
849    
850     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
851     src/GLIArchitectureTemplate.py:
852 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
853     'make dep' call for custom compile. build_mode support for prepare-only and
854     none types completed. custom compile function chains shell functions in
855     spawned script, to allow for catching all errors.
856    
857 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
858     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
859     and GenDialog. other gendialog updates as well. kernel updates untested.
860    
861 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
862     src/GLIInstallProfile.py:
863     Change structure of etc-portage stuff. The serialization was broken before my
864     last commit, and I am the only person that's ever used it. The new schema is
865     as follows:
866     <etc-portage>
867     <file name="package.mask"/>
868     <file name="package.unmask">
869     <entry atom="sys-kernel/openmosix-sources"/>
870     </file>
871     <file name="package.use">
872     <entry atom="sys-libs/db">
873     -java
874     </entry>
875     <entry atom="dev-libs/cyrus-sasl">
876     -ldap
877     </entry>
878     </file>
879     </etc-portage>
880    
881    
882 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
883     src/GLIInstallProfile.py:
884     Add new entry for gli-profile/kernel-build-method item. Add missing
885     serialize_etc_portage (temporary). Make serialize_make_conf always print the
886     keys in the same order.
887    
888 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
889     src/GLIArchitectureTemplate.py:
890 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
891     was repeatedly appended to make.conf.
892    
893     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
894     src/GLIArchitectureTemplate.py:
895 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
896     successfully mounted swap device for using swapoff. Add proper error checking
897     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
898     'file'. Clean up some redundant code (thanks to pychecker).'
899    
900 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
901 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
902 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
903     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
904 agaffney 668
905 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
906     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
907     in add_network_interface.
908    
909 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
910     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
911     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
912 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
913     prepare_chroot.
914 robbat2 664
915 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
916     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
917     +src/fe/installer-gtk:
918     Add new automated CLI frontend. Add scripts that are the intended means to
919     use each frontend.
920    
921 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
922 robbat2 663 src/GLIClientController.py:
923     Add null type to network config, for cases where the interface is already up
924     and should not be touched (netboot for example).
925    
926     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
927 robbat2 652 src/GLIArchitectureTemplate.py:
928 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
929     string!. Try to use binary packages if available by default.
930    
931     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
932     src/GLIArchitectureTemplate.py:
933 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
934     actually exists before we try to add it. set_services phase must take place
935     after the package installation, otherwise the init scripts might not exist.
936     Find the correct init script for the cron and logging daemons, and add that
937     instead of the package atom.
938    
939     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
940     src/GLIArchitectureTemplate.py:
941 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
942     usage of 'file' to 'contents' for the variable name, as it shadows
943     __builtin__.file.
944    
945     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
946     src/GLIArchitectureTemplate.py:
947 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
948     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
949     for 'none' kernel config for build_kernel phase. Put kernel_script in
950     /var/tmp instead of /root for build_kernel phase.
951    
952 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
953     Rename mta variables to match syslog/cron variables.
954    
955 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
956 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
957     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
958     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
959     src/templates/.cvsignore, src/tests/.cvsignore:
960     Refactor partition formatting again to include error checking. Allow 'none'
961     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
962    
963     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
964 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
965     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
966     only have a single spawn call.
967    
968 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
969     refixed samyron's fix of set_architecture_template.
970    
971 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
972     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
973     be executable.
974    
975 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
976     Fixed one of the FIXME's in the ClientConfiguration. There is now some
977     error checking when you call set_architecture_template.
978    
979 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
980     moved the mkfsopts input to the partition options menu instead of the during
981     the creation process. updated GenDialog to say it supports reiserfs v3.
982    
983 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
984     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
985     Complete support for 'mkfsopts' parameter in main system and dialogfe.
986     Add support for other partition types to dialogfe.
987     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
988     avoid integer overflows and wraparounds.
989    
990 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
991     Removed start/end from XML output and added mkfsopts to partitioning info.
992 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
993 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
994 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
995     partitioning. Fix free space overwriting bug. Remove a few unused functions
996 agaffney 640 from rewrite. Fix call to get_partition_at()
997 agaffney 631
998 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
999     Updates to GenDialog and dialogfe.
1000    
1001 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1002 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1003 agaffney 627
1004 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1005     more GenDialog updates to partitioning.
1006    
1007 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1008     Indenting issue in GLISD/get_ordered_partition_list.
1009     updates to GenDialog partitioning and added default UTC for timezone in IP.
1010    
1011 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012     Added GLISD.get_model()
1013    
1014 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1015     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1016     More updates to GenDialog :)
1017    
1018 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1019     Added get_interface_realname() function.
1020    
1021 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1022     Added auto-save of CConfig and copying to new /root after install.
1023     yet even more GenDialog updates.
1024    
1025 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1026     removed print statement from GLISD. more updates to GenDialog.
1027    
1028 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1029 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1030 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1031 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1032     places in GLIClientConfiguration.
1033 agaffney 608
1034 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1035     Fix mount_local_partitions(), configure_fstab(), and
1036 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1037 agaffney 601 A few more fixes for templates/x86Archtemplate
1038 agaffney 599
1039 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1040     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1041     a work in progress.
1042    
1043 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1044     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1045     directly. GLISD can now handle data imported from XML.
1046    
1047 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1048     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1049     handle blank (no disklabel) disks.
1050    
1051 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1052     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1053     up, documented, and separated out serialization and grouped all sections.
1054    
1055 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1056     Reorganization of ClientConfiguration and gutting of unused functions.
1057     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1058    
1059 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1060     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1061    
1062 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1064 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1065     copies it into /mnt/gentoo/root
1066 agaffney 588
1067 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1068     Moved URI parsing into new function parse_uri()
1069    
1070 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1071     Added XMLParser module.
1072    
1073 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1074     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1075 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1076 agaffney 580
1077 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1078     Updated finishing_cleanup for new unmounting method from agaffney.
1079    
1080 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1081 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1082 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1083     unicode support to is_realstring().
1084 agaffney 575
1085 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1086 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1087 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1088 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1089     instead of --nocolor.
1090 agaffney 571
1091 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1092     Added GLIGenDialog.py to make a generic class for the dialog functions that
1093 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1094     date changes. 2004->2005.
1095 codeman 566
1096 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1097     Removed 'quiet=True' from spawn() calls
1098    
1099 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1100     Updated GLIUtility with patches from chotchki. Also added documentation
1101    
1102 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1103     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1104     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1105     from bug #89683, mostly touchups.
1106    
1107 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1108     GLIStorageDevice cleanup patch from bug #91761
1109    
1110 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1111     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1112 agaffney 553 _edit_config(). Error logging casts 'error' to str
1113 agaffney 551
1114 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1115 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1116     code to CC to handle exceptions *not* thrown by the installer itself.
1117 agaffney 548
1118 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1119     get_max_mb_for_resize() returns -1 if not self.resizeable
1120    
1121     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1122 agaffney 539 More dirty rsync hacks :-/
1123    
1124 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1125     Patches from chotchki (bug #90325) to improve CC networking. untested.
1126    
1127 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1128 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1129 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1130 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1131 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1132 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1133     _get_packages_to_emerge()
1134 agaffney 528
1135 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1136     Added group-adding code to set_users in ArchTemplate
1137    
1138 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1139     Added post-install script code
1140    
1141 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1142     Fixed encapsulation issues in GLIClientController (bug #90141)
1143    
1144 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1145     Update resizing code in GLIStorageDevice
1146    
1147 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1148     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1149    
1150 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1151     Reverted change to ArchTemplate and added support for commented line in old
1152     code.
1153    
1154 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1155     Changed _edit_config() to modify value in-place instead of commenting out and
1156     adding the new value to the end of the file.
1157    
1158 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1159     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1160     Also updated TODO list.
1161    
1162 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1163     Use blackace's one-liner to add comments for all function for use with
1164     pythondoc.
1165    
1166 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1167     Moved 'end >= device_sectors' check out of loop to check for next partition's
1168 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1169 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1170     point of logical is now adjusted along with start.
1171 agaffney 503
1172 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1174 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1175     key in partition information due to new partition code leaving them as float.
1176 agaffney 497
1177 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1179 agaffney 494
1180 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1181     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1182    
1183     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1184 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1185    
1186 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1187 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1188     sed to properly strip out junk.
1189 agaffney 481
1190 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1191 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1192 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1193 codeman 475
1194 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1195     Fixed indent problem in GLICController
1196    
1197 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1198     Check for disklabel type "loop" and use the device name without a minor.
1199    
1200 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1201     Remove /tmp/compile_output.log and /var/log/install.log when install is
1202 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1203 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1204 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1205 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1206 agaffney 453
1207 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1209     when unpacking tarball.
1210 agaffney 451
1211 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1212 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1213     filesystem_tools code.
1214 codeman 443
1215 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1216     Changed the print statements to logging in the partitioning BE code.
1217     the logger may need to be imported to the x86archtemplate. unknown yet.
1218 codeman 432 Added the finishing_cleanup function.
1219 codeman 433 added a fix to the logger from BenUrban
1220 codeman 427
1221 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1222     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1223     URIs. The blank uri check has been commented out.
1224 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1225 codeman 422
1226 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1227     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1228    
1229 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1231 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1232 agaffney 415
1233 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1234     small changes to setup_network_post. moved adding to runlevel of net.x to
1235     after the device gets symlinked. added domainname runlevel command.
1236    
1237 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1239 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1240     spawn() call in livecd-kernel code to pass environment variables.
1241 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1242     the install profile if available.
1243 agaffney 402
1244     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1245 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1246     to handle installing the livecd kernel into the new system.
1247    
1248 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1249     should emerge hotplug and coldplug before adding them to runlevel.
1250    
1251 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1252 codeman 395 took chroot out of grub_install command.
1253    
1254     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1255     Changed chroot wrapper code in spawn() to write the wrapper the python way
1256     instead of the bash way to avoid quote conflicts. Added
1257 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1258 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1259     as it breaks the piping.
1260 codeman 390
1261 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1262     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1263    
1264 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1265     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1266 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1267 agaffney 389 GLIInstallProfile.
1268 agaffney 385
1269 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1271     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1272     into /mnt/gentoo in prepare_chroot()
1273 agaffney 379
1274 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1275     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1276 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1277     to start/end sectors
1278 agaffney 375
1279     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 agaffney 374 Add 2>&1 to cmd in spawn()
1281    
1282 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1283     Modified GLIUtility.exitsuccess() to work with return value from
1284 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1285     creates wrapper script for commands run inside chroot so multiple commands
1286 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1287     for the generated script from spawn()
1288 agaffney 369
1289 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1290     Removed default values for stage tarball URI and portage tree URI from
1291     InstallProfile. These should be set by the FEs. also added services step to
1292     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1293     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1294    
1295 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1296     Small fix for setting the default gateway. Also added feature to dialogfe.
1297    
1298 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1299     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1300    
1301 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1302 codeman 346 Fixed a bunch of true -> True typos. lots of em
1303 codeman 347 only write new resolv.conf if there are dns servers listed.
1304 codeman 345
1305 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1306     Commented out 'display_on_tty8=True' in start_portmap()
1307    
1308 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1309     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1310    
1311 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1313     lang parameter to __init__()
1314 codeman 331
1315     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1316     updates to TODO list.
1317 esammer 4
1318 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1319 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1320     'emerge -p blah'
1321 agaffney 322
1322 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1323 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1324     added quickpkg to TODO list
1325 codeman 319
1326 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1327     Changed the raising of 'warning' exceptions to a simple log of the error
1328     so that the installer can continue.
1329    
1330 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1331     Some big changes. First, changed most output to display_on_tty8.
1332     Second, added log lines to all templates. Some smaller fixes such as typos.
1333     Also did some cleanups of old commented lines.
1334    
1335 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1337 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1338 agaffney 310
1339 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1340     more updates to TODO list. hopefully we'll soon start removing items instead
1341     of adding them.
1342    
1343 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1344     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1345    
1346 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1347 codeman 295 updated TODO list. (again)
1348 codeman 293
1349 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1350     changed output of portmap start to display_on_tty8.
1351     fixed bootloader for udev and multiple kernels
1352 codeman 288 fixed custom kernel config (again)
1353 codeman 286
1354 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1355     changed default value of CC._enable_ssh to True because this is smart.
1356 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1357 codeman 281
1358 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1359     partition() now waits until after it checks for partition flags before delete
1360     the partitions :P
1361    
1362 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1363 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1364 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1365     blank.
1366 agaffney 271
1367 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1368     Various fixes related to the add_users function. Still not yet finished.
1369 codeman 269 Added things to the TODO list. Lets start using that!
1370 codeman 268
1371 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1372     Added code to x86Template to format newly created partitions. Also added
1373 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1374 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1375     mounting code.
1376 agaffney 264
1377 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1378     Took out unnecessary setting of random livecd root password. the cd already
1379     sets it randomly.
1380    
1381 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1382     Took out an unneeded step from CC's run()
1383    
1384 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1385     Attempt at detecting and adding windows partitions to lilo.
1386    
1387 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1388 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1389     partition. fixed misc exit_status => exitstatus typo.
1390 codeman 235
1391 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1392 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1393     resizing ntfs and ext2/3.
1394 agaffney 230
1395 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1396     Fixed partition() in x86Template so that it scans through logicals and deletes
1397 agaffney 229 before deleting containing extended partition. Also clears partition table to
1398     be safe before third pass.
1399 agaffney 228
1400 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1401     Added mount_network_shares. not able to test it from this computer.
1402     will test when i get back to school.
1403     also added start_portmap to the client_controller as an always-do.
1404     agaffney says this is needed for NFS mounts to work.
1405    
1406 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1407     Partial rewrite of partitioning code in x86Template. No longer shells out to
1408     parted to perform actions, now uses all pyparted calls. Code "works" in a
1409     test, but still needs lots of TLC. Also modified tests/install.py to work
1410     with x86Template and GLIClientConfiguration.
1411    
1412 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1413     Initial move of partitioning code from ArchTemplate to x86Template.
1414 agaffney 220
1415 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1416 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1417 codeman 222
1418     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1419 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1420     Test Install ran very well (skipping partitioning).
1421    
1422 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1423 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1424 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1425     some may still have eluded me.
1426 codeman 215
1427     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1428 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1429     Just finished mount_local_partitions in GLIArchitectureTemplate
1430    
1431 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1432     Added get_num_sectors() to GLIStorageDevice.
1433    
1434     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1436 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1437     from GLIInstallProfile.
1438 agaffney 205
1439 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1440     GLIStorageDevice returns "unknown" instead of "" for get_type()
1441    
1442 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1443 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1444     actually work. Commented out resizability checking code for speed.
1445 agaffney 183
1446 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1447     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1448     GLIStorageDevice at the suggestion of plors
1449    
1450 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1451     Added a function to GLIUtility to pull a value from a make.conf-style config
1452 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1453 agaffney 162
1454 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1455 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1456     network mounts from partition data structure in GLIInstallProfile
1457 agaffney 161
1458 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1459     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1460     can be resized.
1461    
1462 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1463     Added some of the final functions to GLIInstallTemplate.
1464     Yes this project is still active despite rare use of the Changelog!
1465    
1466 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1467     Added the GLIPartitionTools.py file. This is a temporary insertion of
1468     partitioning tools that will eventually go into their own package.
1469    
1470 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1471     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1472     for the program). Added __init__(install_profile, client_configuration) to
1473     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1474     to avoid constantly passing stuff every time we call a method.
1475    
1476 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1477    
1478     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1479     files without messing up all the other stuff in them. This will be used for making
1480     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1481    
1482 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1483    
1484     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1485     have a few basic things. I added two private methods. One is _depends(). This
1486     will be used for dependency checking (ie. unpacking a tarball requires that
1487     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1488     same syntax as os.system(), however, instead of being run in the liveCD
1489     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1490     isolated the code. Hope to work more this week to get this class formed...
1491    
1492 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1493    
1494     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1495     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1496     to allow for easier modification (mutable, rather than immutable objects). Updated
1497     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1498     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1499     Added initial unit test code.
1500    
1501 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1502    
1503     Added initial changelog. Setting up the basic structure of the CVS repository
1504     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1505     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20