/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1302 - (hide annotations) (download)
Sun Feb 12 23:13:55 2006 UTC (8 years, 4 months ago) by agaffney
File size: 69029 byte(s)
  src/templates/x86ArchitectureTemplate.py:
  pull old start/end sector values from somewhere that actually has them
  add logic for extended partition to code that makes sure new end sector
  doesn't overlap start sector of next partitions

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1302 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.596 2006/02/12 23:13:55 agaffney Exp $
5 codeman 773
6 agaffney 1302 *GLI-0.3 (12 Feb 2006)
7 agaffney 791
8 agaffney 1302 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
9     src/templates/x86ArchitectureTemplate.py:
10     pull old start/end sector values from somewhere that actually has them
11     add logic for extended partition to code that makes sure new end sector
12     doesn't overlap start sector of next partitions
13    
14 agaffney 1297 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
15     src/GLIPortage.py:
16     run env-update at the end of copy_pkg_to_chroot()
17    
18 agaffney 1295 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
19     src/templates/x86ArchitectureTemplate.py:
20     I'm a complete fscking dumbass. I recorded the end sector for partitions that
21     weren't being touched, but I never used it when recreating them...the end was
22     calculated from the size in MB instead :/
23    
24 agaffney 1288 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
25     src/GLIArchitectureTemplate.py:
26     pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
27 agaffney 1294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
28 agaffney 1291 src/GLIPortage.py:
29     use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
30     src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
31     'resized' flag
32 agaffney 1288
33 agaffney 1285 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34     src/GLIPortage.py:
35     short circuit and check vdb directly if package begins with '='
36    
37 codeman 1284 8 Feb 2006; Preston Cody <codeman@gentoo.org>
38     added more packages to extra_packages list in IP
39    
40 agaffney 1277 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
41     src/templates/x86ArchitectureTemplate.py:
42     10 tries to create filesystem instead of 3
43 agaffney 1280 src/GLIPortage, src/GLIArchitectureTemplate.py:
44     ignore_missing flag for copy_pkg_to_chroot()
45 agaffney 1277
46 agaffney 1269 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47     src/GLIPortage.py:
48     copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
49    
50 agaffney 1264 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
51     src/net/server/gliserv.py:
52     fix handling of 404 for real files
53     src/net/server/GLIServerProfile.py:
54     look for 'hostname' in attributes instead of 'name'
55    
56 agaffney 1257 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
57     src/SimpleXMLParser.py:
58     initial support for 'include' in XML files
59 agaffney 1258 src/GLIStorageDevice.py:
60     initial support for %
61 agaffney 1259 src/GLIClientController.py:
62     add debugging statements to pre-install steps
63 agaffney 1257
64 codeman 1253 15 Jan 2006; Preston Cody <codeman@gentoo.org>
65     webgli/configfiles:
66     check for key in etc_files['rc.conf'] to fix key error
67     webgli/timezone: small fix.
68 codeman 1254 webgli/extrapackages: list-type fix
69     webgli/services: same
70     glimd: add/edit_client updates.
71 codeman 1253
72 codeman 1248 12 Jan 2006; Preston Cody <codeman@gentoo.org>
73     added configure.pyhtml to glimd. minor changes
74     to top and add_client. fixed up showargs.
75 codeman 1250 added execute.pyhtml
76     changed register clients line in gliserv for name->hostname.
77     updated TODO.
78 codeman 1248
79 codeman 1246 10 Jan 2006; Preston Cody <codeman@gentoo.org>
80     src/net/server/*:
81     added add/del/edit client/profile.pythml for glimd.
82     updated templates, showclients, and gliserv.
83    
84 agaffney 1245 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
85     src/net/server/*:
86     stupid threading module...
87    
88 codeman 1241 8 Jan 2006; Preston Cody <codeman@gentoo.org>
89     AT: rc.conf -> conf.d/clock
90    
91 agaffney 1223 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
92     src/GLIPortage.py:
93     show 'Calculating dependencies for ...' in subprogress bar at beginning of
94     emerge()
95     src/GLIArchitectureTemplate.py:
96     copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
97     in the chroot
98 agaffney 1228 remove _quickpkg_deps() and _portage_best_{visible,version}()
99 agaffney 1225 src/GLIUtility.py:
100     fail immediately in validate_uri() if provided URI can't be parsed
101 agaffney 1233 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
102 agaffney 1239 debug code in spawn()
103     use lower-level os.read() instead of file.read() because python sucks
104 agaffney 1227 src/templates/x86ArchitectureTemplate.py:
105     basic subprogress reporting for partitioning
106 agaffney 1231 total_steps was 1 too high
107 agaffney 1223
108 agaffney 1221 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
109     src/GLIUtility.py:
110     move parse_vdb_contents() to GLIPortage
111     src/GLIPortage.py:
112     remove all symlink fixups
113 agaffney 1222 ignore 'dir' entries in CONTENTS
114     call tar with -p
115 agaffney 1221
116 codeman 1220 5 Jan 2006; Preston Cody <codeman@gentoo.org>
117     AT: bootsplash is now gensplash
118     gliserv: add advanced_mode to shared_info
119     webgli: Added advanced mode. mostly just disables a few screens.
120    
121 agaffney 1205 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
122     src/GLIPortage.py:
123     get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
124     added emerge()
125 agaffney 1208 update sub-progress after each package is emerged
126     skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
127 agaffney 1211 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
128 agaffney 1216 remove link if it exists before moving content into place
129 agaffney 1205 src/GLIArchitectureTemplate.py:
130     install_packages() now calls emerge() in GLIPortage
131 agaffney 1208 change all calls to self._emerge() to self._portage.emerge()
132     comment out all emerge status checking...using exceptions now
133 agaffney 1214 call copy_pkg_to_chroot() directly for livecd-kernel
134 agaffney 1205
135 agaffney 1198 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
136     src/GLIArchitectureTemplate.py:
137     remove add_pkg_to_world() and copy_pkg_to_chroot()
138 agaffney 1201 copy installer.log to installer.log.failed on install failure
139 agaffney 1202 src/GLIUtility.py:
140     added get_keymaps()
141     spawn() takes any False argument for chroot instead of just None
142 agaffney 1198 src/GLIPortage.py:
143     copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
144 agaffney 1202 change copy_pkg_to_chroot() to work properly with use_root=False
145 agaffney 1204 figure PORTAGE_TMPDIR properly
146 agaffney 1198
147 agaffney 1197 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
148     src/net/server/html/*:
149     converted showclients, load/saveprofile
150    
151 agaffney 1194 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
152     src/GLIPortage.py:
153     exclude packages already in chroot vdb from binary deplist
154 agaffney 1195 chroot to use best_version for chroot's vdb
155 agaffney 1196 src/runtimedeps.py:
156     accept ROOT via commandline instead of env
157 agaffney 1194
158     25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
159 agaffney 1189 src/runtimedeps.py:
160 agaffney 1191 remove passing of ROOT
161 agaffney 1184 src/GLIPortage.py:
162 agaffney 1189 modify get_deps() to get deptree for each package and merge into final list
163 agaffney 1190 remove depgraph class
164     add debugging code to get_deps()
165 agaffney 1189 src/GLIArchitectureTemplate.py:
166     combine code for GRP/compile in install_packages() into one block
167 agaffney 1190 debugging code in install_packages()
168 agaffney 1184
169 agaffney 1194 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
170     src/runtimedeps.py:
171     initial commit
172     src/GLIPortage.py:
173     use separate script for GRP deps
174     remove calls to portage module
175    
176 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
177     src/GLIPortage.py:
178     initial commit
179 agaffney 1182 move some of portage function from GLIAT
180 agaffney 1183 flipped around a few function args
181 agaffney 1182 src/GLIArchitectureTemplate.py:
182     revamp install_packages() for new GLIPortage
183 agaffney 1181
184 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
185     src/GLIArchitectureTemplate.py:
186     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
187    
188 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
189     src/net/server/gliserv.py:
190     wrap generated code in a class to isolate it a bit better
191     302 redirects work
192 agaffney 1179 don't use cgi.escape() for <% %>
193 agaffney 1177 src/net/server/html/webgli/*:
194     load/save profile
195 agaffney 1178 src/GLIUtility.py:
196     change /sbin/lspci to just lspci
197 agaffney 1176
198 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
199     src/GLIClientController.py:
200     change ordering of statements in CC run() while loop to not go past the end
201     of the array
202 agaffney 1173 src/GLIArchitectureTemplate.py:
203     removed redundant bind mounts
204 agaffney 1172
205 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
206     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
207 codeman 1171 added a diagram by blackace from last night.
208     added the glossary in RTF format.
209 codeman 1170
210 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
211     x86AT: separated out emerge/configure from running of bootloader
212     added MBR drive support to lilo.
213     these changes will likely not work.
214     AT: added setup_and_run_bootloader step.
215    
216 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
217     src/net/server/gliserv.py:
218     call generated code in a function
219     src/net/server/html/webgli/*:
220     include top/bottom
221 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
222     src/GLIClientCongifuration.py:
223     install mode magic
224 agaffney 1163
225 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
226     src/GLIClientController.py:
227     use GLIException when there's an import problem
228 agaffney 1159 added debug code to show install_steps
229 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
230     add . to import path
231 agaffney 1160 proper path this time: ../../templates
232 agaffney 1162 src/GLIArchitectureTemplate.py:
233     add _portage_best_version() function
234 agaffney 1156
235 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
236     added initial glossary and gimli diagram to the docs directory.
237 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
238 codeman 1154
239 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
240     src/net/server/html/webgli/:
241     converted globaluse, localuse, networkmounts, portagetree, and stageselection
242 agaffney 1150 moved saveclientconfig stuff into clientconfig
243 agaffney 1151 moved saveconfigfiles into config files
244     converted etc_portage and makedotconf
245 agaffney 1152 converted bootloader and kernel
246 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
247 agaffney 1151 src/net/server/gliserv.py:
248     proper 404 handling for .pyhtml extension
249     HTML escape <% %> stuff
250 agaffney 1152 work around python's sucky regexes
251 agaffney 1153 src/GLIInstallProfile.py:
252     allow set_{rsync,ftp,http}_proxy() to accept empty values
253 agaffney 1149
254 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
255     src/net/server/gliserv.py:
256 agaffney 1148 initial commit of Legolas templating engine
257     302 redirects
258 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
259     minor changes for new code
260     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
261     initial commit of the conversion from the monolithic WebGLIHandler.py to the
262 agaffney 1148 one file per path Legolas goodness
263     partitioning[2-4] done
264 agaffney 1147
265 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
266     webgli: dhcp options in CC and post-install.
267     updated comparison chart.
268 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
269 codeman 1145
270 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
271     webgli_template.html: valign=top on left side.
272     webgli: fix bootloader boot_device. now working.
273 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
274 agaffney 1138
275 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
276     src/net/server/webgli_template.html:
277     increase padding for content cell to 7px and add colspan=2
278    
279 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
280     webgli: added graphic bar on top
281     webgli: added hover effects on the links on the left
282     webgli: re-rendered header_bg.png to stretch without artifacts
283    
284 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
285     webgli: make.conf disabling fixes for dynamic_stage3
286     fixed portage snapshot browse popup
287     all changes tested.
288     webgli: add debug mode to CC screen. the screen still needs lots of work.
289    
290 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
291     added debug mode question to gli-dialog
292     added CC proxies to CC networking for gli-dialog
293 codeman 1125 webgli: fixed skip CC networking if connection active
294     webgli: portage snapshot defaults to CD
295     webgli: bootloader mbr drive selection
296     webgli: USE flags unselectable if dynamic_stage3
297     webgli: manual extra packages and save button.
298    
299 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
300     src/GLIUtility.py:
301     change ping count to 2
302 agaffney 1121 docs/comparison.html
303     initial commit
304 agaffney 1119
305 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
306     src/templates/x86ArchitectureTemplate.py:
307     fix map() issue with grub code
308     replace kernel_names and initrd_names loops with one-liners
309    
310 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
311     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
312 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
313 codeman 1106 failure cleanup now an option for gli-dialog.
314 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
315     added comparison list and updated TODO!
316 codeman 1102
317 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
318     src/GLIArchitectureTemplate.py:
319     fix to stage1() debug code
320 agaffney 1098 fix to stage2() debug code
321 agaffney 1097
322 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
323     some more bootloader code fixes. forgot boot_device != mbr_device.
324 agaffney 1097
325     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
326     src/GLIStorageDevice.py:
327     fix to unallocated space merging when last one is after part 4
328 codeman 1096
329 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
330     src/GLIArchitectureTemplate.py:
331     small fix to debugging code in copy_pkg_to_chroot()
332    
333 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
334 codeman 1096 more bugfixes with bootloader code
335     gli-dialog side appears to work
336 codeman 1086
337 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
338 codeman 1080 initial adding of boot_device to backend.
339     initial boot_device support added to gli-dialog.
340 codeman 1096 some fixes of my poor coding
341 codeman 1077
342 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
343 codeman 1075 converted gli-dialog to use the install_package_list.
344     gtkfe has already been converted by AllanonJL
345 codeman 1076 new way working in gli-dialog now and added to webgli.
346 codeman 1077 added set/get_boot_device() to IP
347 codeman 1075
348 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
349     get_install_package_list added to InstallProfile. This can be used by the FEs
350    
351 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352     src/templates/x86ArchitectureTemplate.py:
353     call ls with '-1 --color=no'
354    
355 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
356 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
357 codeman 1069
358 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
359     src/GLIArchitectureTemplate.py:
360     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
361     confused
362    
363 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
364     removed protocols from rc.conf screens
365     finished initial rc.conf and make.conf in webgli
366    
367 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368     src/net/server/gliserv.py:
369     add -h option to usage()
370 agaffney 1063 show time and request URI in debug mode
371 agaffney 1064 show client IP in debug mode
372 agaffney 1065 just use IP instead of trying to do a reverse lookup
373 agaffney 1062
374 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
375     src/net/server/gliserv.py:
376     'classier' 401 message
377     proper commandline parsing
378     help via -h
379     user/pass can be specificed via commandline option
380    
381 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
382 agaffney 1057 src/net/server/gliserv.py:
383 agaffney 1059 basic HTTP auth
384    
385     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
386     src/net/server/gliserv.py:
387 agaffney 1057 dynamic module reloading (yipee!)
388 agaffney 1058 send 'Last-Modified' header for real files
389     respond to HEAD with just headers
390 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
391     icons for drives
392    
393 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
394     src/net/server/handlers/WebGLIHandler.py:
395     initial 'pretty' partition table display support
396 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
397 agaffney 1044 radio buttons and pretty display work together
398     META redirect instead of javascript
399     pretty display stretches across entire screen
400 agaffney 1046 'Recommended layout' and 'Clear drive' functions
401 agaffney 1047 properly catch exceptions from do_recommended()
402 agaffney 1049 src/GLIArchitectureTemplate.py:
403     replace preinst, copy, postinst, rm steps with qmerge
404 agaffney 1050 whoops...that shouldn't have been commented out
405 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
406 agaffney 1052 more generic of symlink crappiness
407 agaffney 1053 new copy_pkg_to_chroot() actually works now
408 agaffney 1042
409 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
410     src/GLIStorageDevice.py:
411     initial generic disk support
412 agaffney 1040 fixes for add_partition() code
413 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
414     added support for creating generic disks
415 agaffney 1040 add new partition working
416 agaffney 1041 save and delete partitions
417 agaffney 1037
418 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
419     webgli: Partitioning making progress.
420    
421 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
422     src/GLIArchitectureTemplate.py:
423     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
424     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
425     dir) and works around /etc/gconf symlink problem
426    
427 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
428     webgli: lots of updates. preliminary partitioning. extra packages works.
429    
430 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
431     src/net/server/gliserv.py:
432     httpd now supports HTTPS and falls back to HTTP if not available
433 agaffney 1030 make fallback actually work
434 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
435     SecureSocketServer is now threaded
436    
437 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
438     src/net/client/gliclient.py:
439     try to use HTTPS for XMLRPC first and fallback to HTTP
440 agaffney 1028 pretend mode
441 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
442     HTTPS XMLRPC goodness from samyron
443 agaffney 1028 pass name of certificate
444 agaffney 1026
445 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
446     wegli: daemons and services screens done.
447    
448 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
449     webgli: networking and users screens
450     added return_redirect to handler.py
451 codeman 1022 loading and saving install/client profiles works for webgli now
452     Review also done
453 agaffney 1033
454     *GLI-0.2 (27 Oct 2005)
455 codeman 1025
456 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
457     src/templates/x86ArchitectureTemplate.py:
458     properly check for bootloader emerge exist status with exitsuccess()
459 agaffney 1010 log output of grub install command
460 agaffney 1011 add --batch --no-floppy to grub command
461 agaffney 1013 grubinstallstring only gets logged if debug is on
462 agaffney 1012 src/GLIUtility.py:
463     update progress bar to 100% when process finishes
464 agaffney 1009
465 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
466     src/GLIClientController.py:
467     added debugging code for the interaction between the 2 threads via Event()
468 agaffney 1003 src/GLIUtility.py:
469     doubled the buffer size in spawn()
470 agaffney 1004 bump buffer size up to 16384
471     only report progress in 5% increments
472 agaffney 1005 src/GLIArchitectureTemplate.py:
473     kernelpkgs.txt support code
474 agaffney 1006 above disabled because it sucks
475 agaffney 1007 added add_pkg_to_world()
476 agaffney 1002
477 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
478     src/GLIArchitectureTemplate.py:
479     use tar | tar to copy files in copy_pkg_to_chroot()
480     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
481    
482 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
483     DEBUGGING ADDED TO AT. verbose field added to CConfig.
484    
485 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
486     src/net/server/gliserv.py:
487     / maps to index.html
488     look for actual files in html/
489     src/net/html:
490     new template
491 agaffney 998 src/GLIUtility.py:
492     added parse_vdb_contents()
493     src/GLIArchitectureTemplate.py:
494     added copy_pkg_to_chroot()
495     added debug code to dynamic-stage3
496 agaffney 999 switch dynamic-stage3 to new method
497     lots of bug fixes from adding debug code
498 agaffney 993
499 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
500     webgli initial bootloader support + changed make.conf.
501 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
502 codeman 983
503 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
504 agaffney 982 src/GLIUtility.py:
505 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
506 agaffney 981 add unpack progress to portage snapshot
507 agaffney 982 use read() instead of readlines() in spawn()
508     only update progress bar for whole percents
509 agaffney 980
510 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
511     src/templates/x86ArchitectureTemplate.py:
512     change call to 'grub' to use GLIUtility.exitsuccess()
513 agaffney 977 add definition of 'build_mode' in _configure_lilo()
514 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
515     fix so subshell is called in root shell
516    
517 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
518     src/net/server/handlers/WebGLIHandler.py:
519     stage screen launches URI browser in sized window with various properties set
520    
521 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
522     src/misc/updategtkfe:
523     updated to actually work
524 agaffney 972 remove previous snapshot and extracted dir before downloading
525 agaffney 973 src/misc/updateglid:
526     updated to actually work
527 agaffney 974 src/templates/x86ArchitectureTemplate.py:
528     fixed bug where grub code was looking for 'root+root+file_name2'
529 agaffney 971
530 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
531     src/net/server/handlers/WebGLIHandler.py:
532     URI browser
533 agaffney 970 added mirror selection
534 agaffney 969 src/GLIUtility.py:
535     ls via ssh strips off ending *
536 agaffney 968
537 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
538     more updates to webgli. stage selection.
539    
540 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
541     updated webgli with preliminary Network Mounts support.
542    
543 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
544     GenDialog: string formatting and yes/no label fixes.
545     added WebGLI template for gliserv.py
546     added WebGLIHandler as well as a definition for it in gliserv.py
547     updates to the webgli files even though they won't be there for long.
548 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
549     goes public.
550 codeman 952
551 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
552     src/net/server/gliserv.py:
553     override dict to not be so anal
554 agaffney 949 main server now loads separate module to handle requests
555 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
556 agaffney 949 split out profile URLs into separate handler function
557 agaffney 950 move handlers into subdirectory
558 agaffney 956 add Welcome and Clients handlers
559 agaffney 949
560 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
561     src/GLIUtility.py:
562     raise exception if password prompt received twice
563    
564 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
565 agaffney 944 src/GLIUtility.py:
566 agaffney 943 removed rot13ify()
567    
568     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
569 agaffney 935 src/net/server/gliserv.py:
570     allow for param to be passed multiple times in GET
571 agaffney 940 no XMLRPC functions return None
572 agaffney 941 modify POST request parsing to only create a list if needed
573 agaffney 942 fix GET request parsing so the list creation for multiple values works
574 agaffney 940 src/net/client/gliclient.py:
575     various typo and type mismatch fixes
576     exit after exception
577 agaffney 935
578 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
579     src/net/client/gliclient.py:
580     initial commit
581 agaffney 934 pass MAC to XMLRPC functions
582     src/net/server/GLIServerProfile.py:
583     rename GLIClientsProfiles to GLIServerProfile
584 agaffney 933
585 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
586     src/net/server/gliserv.py:
587     now handles POST requests
588     move majority of request handling code to common_handler() to reduce code
589     duplication
590 agaffney 931 profile loading
591     client reg via XMLRPC goes into SharedInfo()
592     /showclients redesign
593     template fixes
594 agaffney 932 allow handler functions to add/change headers
595     save profile
596 agaffney 930
597 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
598     src/net/server/GLIClientsProfiles.py:
599     initial commit
600     src/net/server/template.html:
601     initial commit
602     src/net/server/gliserv.py:
603     add template mojo
604    
605 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
606     src/net/server/gliserv.py:
607     XMLRPC mojo
608    
609 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
610     src/GLIArchitectureTemplate.py:
611     add code in _edit_config() to comment line where variable is defined
612     previously
613 agaffney 920 insert new line under previous definition of variable if it exists
614 agaffney 921 small _edit_config() cleanup
615 agaffney 923 src/GLIStorageDevice.py:
616     add clear_partitions() function
617 agaffney 924 new sizes for recommended partition layout
618 agaffney 925 automatically calculate swap size for recommended layout
619 agaffney 919
620 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
621     src/templates/x86ArchitectureTemplate.py:
622     fat16 mojo
623    
624 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
625     src/GLIStorageDevice.py:
626     prevent do_recommended() from being run twice
627 agaffney 916 rewrite do_recommended() to be more robust
628 agaffney 917 src/GLIArchitectureTemplate.py:
629     rework _edit_config() to not write duplicate entries
630 agaffney 914
631 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
632     src/GLIStorageDevice.py:
633     added do_recommended() function to automatically created 256M/1G/* layout
634    
635 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
636     src/gli-dialog.py: added set_distcc to the list
637     GenDialog: added set_distcc. untested.
638     IP: added install_distcc flag.
639     AT: added install_distcc function based on the flag. runs after build_kernel
640 codeman 911 changed AT spawn command for distcc for nodeps.
641 codeman 907
642 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
643     src/GLIUtility.py:
644     add rot13ify() function
645    
646 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
647     src/GenDialog.py
648 codeman 905 added a sentence of text. unchecking support added.
649 codeman 904
650 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
651     src/GLIUtility.py
652     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
653     src/GenDialog.py
654 codeman 902 still working on extra_packages. transformed the list to new format.
655     added GRP indication to list. untested.
656 codeman 901 TODO lists updated.
657     src/fe/dialog/gli-dialog.py
658     spelling mistook.
659    
660 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
661     src/GLIUtility.py:
662     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
663    
664 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
665     src/GLIUtility.py:
666     add get_directory_listing_from_uri()
667     add http support to above
668 agaffney 892 add ftp support to above
669 agaffney 893 add scp support to above
670 agaffney 891 src/GLIArchitectureTemplate.py:
671     "0" instead of 0 for key of single-element dict passed to _edit_config()
672 agaffney 889
673 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
674     value_only -> only_value
675    
676 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
677     gutted out all of etc_portage structure since it is now all handled by
678     etc_files
679    
680 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
681     src/GLIArchitectureTemplate.py:
682     install_packages() sends progress update notifications
683 agaffney 876 src/templates/x86ArchitectureTemplate.py:
684     increase sleep to 5s between format tries
685 agaffney 882 src/GLIClientController.py:
686     pass 'self' to AT instead of 'self._pretend'
687 agaffney 874
688 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
689     logger -> logger.log in x86AT
690    
691 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
692     added set_etc_portage to IP. debugging gli-d's support for it.
693    
694 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
695     src/templates/x86ArchitectureTemplate.py:
696     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
697    
698 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
699     src/GLIArchitectureTemplate.py:
700     add _portage_best_version() function and rework install_packages() to allow
701     for future X of Y tracking
702 agaffney 860 Use best_visible instead of best_version
703 agaffney 862 tracked down and fixed missing = causing empty install extra packages
704 agaffney 864 use = when emerging also
705 agaffney 865 quickpkg hokey pokey
706 agaffney 867 run _get_packages_to_emerge() again with -pk
707 agaffney 857
708 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
709     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
710     the end of install_packages.
711 codeman 850 added updateglid to /src/misc
712 codeman 851 updated all core files with new GPL notice and copyright statement.
713 codeman 848
714 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
715     src/GLIUtility.py:
716     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
717     a snapshot in /mnt/cdrom/snapshots/
718 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
719 agaffney 846 change calls to extra package special case functions to 'self.blah'
720 agaffney 839
721 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
722     src/ArchTemplate: changed "voodoo".
723 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
724     normal emerge sync fails.
725 codeman 836 removed get_sources_from_cd because it is obsolete.
726     add special cases to install_packages. remove fatal exception on package
727     install failure b/c the box will still be bootable.
728 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
729     handled in the FEs.
730 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
731     awaiting testing.
732 codeman 830
733 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
734     src/GLIStorageDevice.py:
735     global try/except block around fs resizable detection code
736 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
737     install-failed cleanup function
738 agaffney 826
739 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
740     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
741    
742 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
743 codeman 814 GLIGenDialog:
744     add drive choices for loaded configs.
745     force snapshot for dynamic_stage3
746     init the snapshoturi input to the cd snapshot if not already selected.
747     if dynamic_stage3, skip the make.conf step.
748     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
749     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
750 codeman 812
751 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
752     src/GLIArchitectureTemplate.py:
753     manually call MAKEDEV in stage3-dynamic code
754 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
755 agaffney 815 src/GLIUtility.py:
756     add beginning of validate_uri() function
757 agaffney 817 add file:/// support to validate_uri()
758 agaffney 822 single quotes when setting livecd password
759 agaffney 811
760 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761     src/GLIGenDialog.py:
762     change getmountpoint() to get_mountpoint()
763 agaffney 808 src/misc/updategtkfe:
764     committed script to automatically download latest snapshot and run gtkfe
765 agaffney 809 src/templates/x86ArchitectureTemplate.py:
766     fix _configure_lilo_add_windows() for IP -> GLISD stuff
767 agaffney 810 src/GLIArchitectureTemplate.py:
768     give tmp_minor an initial value in mount_local_partitions so that the value
769     remain from the previous drive
770 agaffney 807
771 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
772     src/templates/x86ArchitectureTemplate.py:
773     Fix _configure_lilo() for IP using GLISD stuff
774 agaffney 806 src/GLIArchitectureTemplate.py:
775     install_cron_daemon() treats "none" specially
776 agaffney 805
777 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
778     old patch from Steven Mertens to resolve bug #96642
779 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
780     strings renamed for global use if necessary.
781 codeman 803 fix all three parts of bug 102291
782 codeman 804 disable set_etc_portage until fully-written.
783 codeman 801
784 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
785     src/GLIClientController.py:
786     lower-case http/ftp proxy envvars
787    
788 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
789     src/GLIClientController.py:
790     log end of pre_install steps to aid in debugging
791 agaffney 798 src/templates/x86ArchitectureTemplate.py:
792     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
793 agaffney 797
794 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
795     src/GLIArchitectureTemplate.py
796     check to make sure that the device node we're wait for to exist isn't of
797     type 'free'
798    
799 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
800     src/GLIGenDialog.py:
801     convert install_packages to list in set_extra_packages()
802 agaffney 793 check return code of checklist() call in "Manual" section
803 agaffney 794 *actually* fix the first problem
804 agaffney 792
805 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
806     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
807     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
808    
809 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
810     src/GLIArchitectureTemplate.py:
811     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
812    
813 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
814     Add CDATA support to SimpleXMLParser and add utility functions for it.
815    
816 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
817     src/GLIArchitectureTemplate.py:
818     Fix case where vixie-cron is specified as a full package atom, as we still
819     don't want to run 'crontab /etc/crontab' for it.
820    
821 agaffney 788 *GLI-0.1 (3 Aug 2005)
822    
823 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
824     add scp to list of is_uri() so GenDialog doesn't complain.
825 codeman 769 fixed livecd-kernel bug in bootloader code.
826 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
827     change bootloader to allow for both initrd and initramfs.
828 codeman 777 fix IP for dynamic_stage3.
829 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
830 codeman 777
831 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
832     Added full scp:// URI support to get_uri() in GLIUtility
833 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
834     Remove print statement from scp:// code.
835 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
836 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
837 agaffney 770 Check to make sure pkg can be split on / and some debugging code
838 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
839 codeman 777 SimpleXMLParser handles True/False/None correctly now
840 agaffney 778 Comment out above fix
841 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
842 codeman 764
843 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
844     Removed a FIXME in the GLIClientConfiguration that is no
845     longer needed.
846    
847 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
848     Default to x86 in ClientConfig
849 agaffney 761 Typo in build-a-stage3 code.
850     Remove MAKEDEV call in build-a-stage3 postscript.
851 agaffney 760
852 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
853     Rewrote init of IP for gli-d. Other GenDialog updates.
854     allow network_type to be None in CConfig.
855    
856 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
857     Add _dynamic_stage3 option to IP.
858     Add check for that option to dynamic stage3 code in ArchTemplate.
859 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
860     Fix serialization of dns-servers in ClientConfig.
861 agaffney 755
862 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
863     changed default values of cron/logger in IP.
864     moved GenDialog IP init out to the individual files. gli-dialog's version
865     will change quite a bit.
866    
867 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
868     added ppcArchTemplate. blank now. working on yaboot.
869 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
870     skeleton implementation of _configure_yaboot.
871     small fixes to other templates.
872 codeman 750
873 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
874     GenDialog updates. changed comment in IP.
875    
876 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
877 robbat2 743 src/GLIInstallProfile.py:
878     Fix codeman's screwup of changing the service seperator to ',' in the parser
879     without changing it in the serialization code! Also document this in a
880     comment so you find it easier. Everybody needs to make sure they update
881     their install profiles!
882    
883     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
884 robbat2 742 src/GLIArchitectureTemplate.py:
885     Fix casting of list to string and concat of None with string, as well as
886     commented prototype of checking that mounting actually worked (found a case
887     where mount can return success, but the mount won't be done).
888    
889     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
890 robbat2 740 src/templates/x86ArchitectureTemplate.py:
891 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
892     checking for the device, and sleeping 1 second each time.
893    
894     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
895     src/templates/x86ArchitectureTemplate.py:
896 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
897     bootloader works again. Also rename _install_{grub,lilo} to
898     _configure_{grub,lilo} since they don't install the loaders anymore
899     themselves.
900    
901 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
902     fix global USE flags to not include the arch types at the end.
903     updates to GenDialog and gli-d.
904    
905 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
906     fixing bootloader code for no initrd and initrd->initramfs naming change.
907    
908 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
909     Proper comments and parameters to GLIException in install_mta()
910 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
911 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
912     list_tarball_from_mirror() to eliminate blank last item.
913 agaffney 733
914 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
915     Added stage3 generation code.
916    
917 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
918     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
919     Mild changes to GenDialog.
920    
921 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
922     Remove separate install step configure_rc_conf() since it's handled by
923     update_config_files()
924     Make a copy of newvalues in _edit_config() so quotes aren't added when the
925     function is called twice on the same file.
926    
927 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
928     Missing \ in sed in _get_packages_to_emerge()
929 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
930 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
931     _get_packages_to_emerge()
932 agaffney 726
933 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
934     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
935     in the dialog.py gauge code.
936    
937 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
938     Add code to update_config_files() to go through etc_files and update stuff.
939 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
940 agaffney 724 Only use float() in partition xml parsing code if type == "free"
941 agaffney 720
942 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
943     finished almost all internationalization of GenDialog.
944 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
945 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
946 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
947 codeman 718
948 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
949     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
950    
951 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
952     fix extra entry in list_mirrors()
953     beginning internationalization runthrough.
954    
955 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
956     added dialog.py to /src temporarily until it gets accepted upstream.
957 codeman 714 fix for unused value in form in dialog.py and changed heights.
958     fix GenDialog forms.
959 codeman 713
960 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
961     Changed hostname/domainname for new baselayout.
962     Changed _add_to_runlevel errors to logs.
963     Updated TODO list to show status of GenDialog
964     More updates to GenDialog including two checklists that probably won't work.
965 codeman 711 update IP to use comma-separated list instead of space separated for services.
966 codeman 710
967 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
968     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
969     GenDialog as it gets closer to completion.
970    
971 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
972 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
973     instead of int() in add_partition_device_partition() for minor (closes 96804)
974 agaffney 704
975     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
976     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
977     instead of 'interfaces[interface][1]' since DHCP uses that field for its
978     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
979    
980 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
981 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
982 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
983 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
984 agaffney 704 Fix undefined variable 'output' issue in spawn().
985 agaffney 697
986 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
987     More updates to GenDialog and gli-d.
988    
989 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990     Modify list_mirrors() to return a list of mirror URL/name pairs.
991    
992 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
993     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
994     get subarch.
995    
996 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997     Backend partitioning will create disklabel is none exists. Installprofile
998 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
999     mount_local_partitions() to remember device along with minor in the
1000 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1001     add else block to log unsupported netmount types to mount_network_shares()
1002 agaffney 691
1003 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1004     src/GLIArchitectureTemplate.py:
1005 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
1006     src/fe/cli/clife.py:
1007     Logging system.
1008     src/GLIUtility.py, src/GLIStorageDevice.py:
1009     Add comments about re-writes needed for boxes without sysfs.
1010    
1011     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1012     src/GLIArchitectureTemplate.py:
1013 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1014     'make dep' call for custom compile. build_mode support for prepare-only and
1015     none types completed. custom compile function chains shell functions in
1016     spawned script, to allow for catching all errors.
1017    
1018 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1019     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1020     and GenDialog. other gendialog updates as well. kernel updates untested.
1021    
1022 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1023     src/GLIInstallProfile.py:
1024     Change structure of etc-portage stuff. The serialization was broken before my
1025     last commit, and I am the only person that's ever used it. The new schema is
1026     as follows:
1027     <etc-portage>
1028     <file name="package.mask"/>
1029     <file name="package.unmask">
1030     <entry atom="sys-kernel/openmosix-sources"/>
1031     </file>
1032     <file name="package.use">
1033     <entry atom="sys-libs/db">
1034     -java
1035     </entry>
1036     <entry atom="dev-libs/cyrus-sasl">
1037     -ldap
1038     </entry>
1039     </file>
1040     </etc-portage>
1041    
1042    
1043 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1044     src/GLIInstallProfile.py:
1045     Add new entry for gli-profile/kernel-build-method item. Add missing
1046     serialize_etc_portage (temporary). Make serialize_make_conf always print the
1047     keys in the same order.
1048    
1049 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1050     src/GLIArchitectureTemplate.py:
1051 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1052     was repeatedly appended to make.conf.
1053    
1054     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1055     src/GLIArchitectureTemplate.py:
1056 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
1057     successfully mounted swap device for using swapoff. Add proper error checking
1058     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1059     'file'. Clean up some redundant code (thanks to pychecker).'
1060    
1061 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1062 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
1063 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1064     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1065 agaffney 668
1066 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1067     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1068     in add_network_interface.
1069    
1070 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1071     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1072     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1073 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1074     prepare_chroot.
1075 robbat2 664
1076 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1077     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1078     +src/fe/installer-gtk:
1079     Add new automated CLI frontend. Add scripts that are the intended means to
1080     use each frontend.
1081    
1082 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1083 robbat2 663 src/GLIClientController.py:
1084     Add null type to network config, for cases where the interface is already up
1085     and should not be touched (netboot for example).
1086    
1087     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1088 robbat2 652 src/GLIArchitectureTemplate.py:
1089 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1090     string!. Try to use binary packages if available by default.
1091    
1092     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1093     src/GLIArchitectureTemplate.py:
1094 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
1095     actually exists before we try to add it. set_services phase must take place
1096     after the package installation, otherwise the init scripts might not exist.
1097     Find the correct init script for the cron and logging daemons, and add that
1098     instead of the package atom.
1099    
1100     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1101     src/GLIArchitectureTemplate.py:
1102 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1103     usage of 'file' to 'contents' for the variable name, as it shadows
1104     __builtin__.file.
1105    
1106     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1107     src/GLIArchitectureTemplate.py:
1108 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
1109     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1110     for 'none' kernel config for build_kernel phase. Put kernel_script in
1111     /var/tmp instead of /root for build_kernel phase.
1112    
1113 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1114     Rename mta variables to match syslog/cron variables.
1115    
1116 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1117 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1118     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1119     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1120     src/templates/.cvsignore, src/tests/.cvsignore:
1121     Refactor partition formatting again to include error checking. Allow 'none'
1122     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1123    
1124     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1126     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1127     only have a single spawn call.
1128    
1129 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1130     refixed samyron's fix of set_architecture_template.
1131    
1132 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1133     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1134     be executable.
1135    
1136 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1137     Fixed one of the FIXME's in the ClientConfiguration. There is now some
1138     error checking when you call set_architecture_template.
1139    
1140 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1141     moved the mkfsopts input to the partition options menu instead of the during
1142     the creation process. updated GenDialog to say it supports reiserfs v3.
1143    
1144 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1145     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1146     Complete support for 'mkfsopts' parameter in main system and dialogfe.
1147     Add support for other partition types to dialogfe.
1148     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1149     avoid integer overflows and wraparounds.
1150    
1151 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1152     Removed start/end from XML output and added mkfsopts to partitioning info.
1153 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1154 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1155 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
1156     partitioning. Fix free space overwriting bug. Remove a few unused functions
1157 agaffney 640 from rewrite. Fix call to get_partition_at()
1158 agaffney 631
1159 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1160     Updates to GenDialog and dialogfe.
1161    
1162 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1163 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1164 agaffney 627
1165 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1166     more GenDialog updates to partitioning.
1167    
1168 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1169     Indenting issue in GLISD/get_ordered_partition_list.
1170     updates to GenDialog partitioning and added default UTC for timezone in IP.
1171    
1172 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1173     Added GLISD.get_model()
1174    
1175 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1176     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1177     More updates to GenDialog :)
1178    
1179 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1180     Added get_interface_realname() function.
1181    
1182 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1183     Added auto-save of CConfig and copying to new /root after install.
1184     yet even more GenDialog updates.
1185    
1186 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1187     removed print statement from GLISD. more updates to GenDialog.
1188    
1189 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1191 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1192 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1193     places in GLIClientConfiguration.
1194 agaffney 608
1195 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1196     Fix mount_local_partitions(), configure_fstab(), and
1197 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1198 agaffney 601 A few more fixes for templates/x86Archtemplate
1199 agaffney 599
1200 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1201     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1202     a work in progress.
1203    
1204 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1205     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1206     directly. GLISD can now handle data imported from XML.
1207    
1208 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1209     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1210     handle blank (no disklabel) disks.
1211    
1212 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1213     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1214     up, documented, and separated out serialization and grouped all sections.
1215    
1216 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1217     Reorganization of ClientConfiguration and gutting of unused functions.
1218     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1219    
1220 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1221     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1222    
1223 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1224 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1225 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1226     copies it into /mnt/gentoo/root
1227 agaffney 588
1228 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1229     Moved URI parsing into new function parse_uri()
1230    
1231 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1232     Added XMLParser module.
1233    
1234 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1235     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1236 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1237 agaffney 580
1238 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1239     Updated finishing_cleanup for new unmounting method from agaffney.
1240    
1241 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1243 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1244     unicode support to is_realstring().
1245 agaffney 575
1246 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1248 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1249 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1250     instead of --nocolor.
1251 agaffney 571
1252 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1253     Added GLIGenDialog.py to make a generic class for the dialog functions that
1254 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1255     date changes. 2004->2005.
1256 codeman 566
1257 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1258     Removed 'quiet=True' from spawn() calls
1259    
1260 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1261     Updated GLIUtility with patches from chotchki. Also added documentation
1262    
1263 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1264     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1265     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1266     from bug #89683, mostly touchups.
1267    
1268 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1269     GLIStorageDevice cleanup patch from bug #91761
1270    
1271 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1272     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1273 agaffney 553 _edit_config(). Error logging casts 'error' to str
1274 agaffney 551
1275 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1276 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1277     code to CC to handle exceptions *not* thrown by the installer itself.
1278 agaffney 548
1279 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1280     get_max_mb_for_resize() returns -1 if not self.resizeable
1281    
1282     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 agaffney 539 More dirty rsync hacks :-/
1284    
1285 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1286     Patches from chotchki (bug #90325) to improve CC networking. untested.
1287    
1288 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1290 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1291 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1292 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1293 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1294     _get_packages_to_emerge()
1295 agaffney 528
1296 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1297     Added group-adding code to set_users in ArchTemplate
1298    
1299 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1300     Added post-install script code
1301    
1302 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1303     Fixed encapsulation issues in GLIClientController (bug #90141)
1304    
1305 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1306     Update resizing code in GLIStorageDevice
1307    
1308 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1309     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1310    
1311 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1312     Reverted change to ArchTemplate and added support for commented line in old
1313     code.
1314    
1315 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1316     Changed _edit_config() to modify value in-place instead of commenting out and
1317     adding the new value to the end of the file.
1318    
1319 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1320     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1321     Also updated TODO list.
1322    
1323 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1324     Use blackace's one-liner to add comments for all function for use with
1325     pythondoc.
1326    
1327 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1328     Moved 'end >= device_sectors' check out of loop to check for next partition's
1329 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1330 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1331     point of logical is now adjusted along with start.
1332 agaffney 503
1333 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1335 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1336     key in partition information due to new partition code leaving them as float.
1337 agaffney 497
1338 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1340 agaffney 494
1341 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1342     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1343    
1344     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1345 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1346    
1347 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1349     sed to properly strip out junk.
1350 agaffney 481
1351 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1352 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1353 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1354 codeman 475
1355 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1356     Fixed indent problem in GLICController
1357    
1358 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1359     Check for disklabel type "loop" and use the device name without a minor.
1360    
1361 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1362     Remove /tmp/compile_output.log and /var/log/install.log when install is
1363 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1364 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1365 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1366 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1367 agaffney 453
1368 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1369 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1370     when unpacking tarball.
1371 agaffney 451
1372 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1373 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1374     filesystem_tools code.
1375 codeman 443
1376 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1377     Changed the print statements to logging in the partitioning BE code.
1378     the logger may need to be imported to the x86archtemplate. unknown yet.
1379 codeman 432 Added the finishing_cleanup function.
1380 codeman 433 added a fix to the logger from BenUrban
1381 codeman 427
1382 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1383     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1384     URIs. The blank uri check has been commented out.
1385 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1386 codeman 422
1387 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1388     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1389    
1390 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1391     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1392 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1393 agaffney 415
1394 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1395     small changes to setup_network_post. moved adding to runlevel of net.x to
1396     after the device gets symlinked. added domainname runlevel command.
1397    
1398 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1400 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1401     spawn() call in livecd-kernel code to pass environment variables.
1402 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1403     the install profile if available.
1404 agaffney 402
1405     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1406 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1407     to handle installing the livecd kernel into the new system.
1408    
1409 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1410     should emerge hotplug and coldplug before adding them to runlevel.
1411    
1412 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1413 codeman 395 took chroot out of grub_install command.
1414    
1415     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1416     Changed chroot wrapper code in spawn() to write the wrapper the python way
1417     instead of the bash way to avoid quote conflicts. Added
1418 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1419 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1420     as it breaks the piping.
1421 codeman 390
1422 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1423     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1424    
1425 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1426     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1427 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1428 agaffney 389 GLIInstallProfile.
1429 agaffney 385
1430 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1431 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1432     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1433     into /mnt/gentoo in prepare_chroot()
1434 agaffney 379
1435 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1436     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1437 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1438     to start/end sectors
1439 agaffney 375
1440     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 agaffney 374 Add 2>&1 to cmd in spawn()
1442    
1443 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1444     Modified GLIUtility.exitsuccess() to work with return value from
1445 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1446     creates wrapper script for commands run inside chroot so multiple commands
1447 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1448     for the generated script from spawn()
1449 agaffney 369
1450 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1451     Removed default values for stage tarball URI and portage tree URI from
1452     InstallProfile. These should be set by the FEs. also added services step to
1453     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1454     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1455    
1456 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1457     Small fix for setting the default gateway. Also added feature to dialogfe.
1458    
1459 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1460     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1461    
1462 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1463 codeman 346 Fixed a bunch of true -> True typos. lots of em
1464 codeman 347 only write new resolv.conf if there are dns servers listed.
1465 codeman 345
1466 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1467     Commented out 'display_on_tty8=True' in start_portmap()
1468    
1469 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1470     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1471    
1472 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1473 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1474     lang parameter to __init__()
1475 codeman 331
1476     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1477     updates to TODO list.
1478 esammer 4
1479 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1480 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1481     'emerge -p blah'
1482 agaffney 322
1483 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1484 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1485     added quickpkg to TODO list
1486 codeman 319
1487 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1488     Changed the raising of 'warning' exceptions to a simple log of the error
1489     so that the installer can continue.
1490    
1491 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1492     Some big changes. First, changed most output to display_on_tty8.
1493     Second, added log lines to all templates. Some smaller fixes such as typos.
1494     Also did some cleanups of old commented lines.
1495    
1496 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1497 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1498 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1499 agaffney 310
1500 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1501     more updates to TODO list. hopefully we'll soon start removing items instead
1502     of adding them.
1503    
1504 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1505     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1506    
1507 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1508 codeman 295 updated TODO list. (again)
1509 codeman 293
1510 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1511     changed output of portmap start to display_on_tty8.
1512     fixed bootloader for udev and multiple kernels
1513 codeman 288 fixed custom kernel config (again)
1514 codeman 286
1515 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1516     changed default value of CC._enable_ssh to True because this is smart.
1517 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1518 codeman 281
1519 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1520     partition() now waits until after it checks for partition flags before delete
1521     the partitions :P
1522    
1523 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1524 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1525 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1526     blank.
1527 agaffney 271
1528 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1529     Various fixes related to the add_users function. Still not yet finished.
1530 codeman 269 Added things to the TODO list. Lets start using that!
1531 codeman 268
1532 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1533     Added code to x86Template to format newly created partitions. Also added
1534 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1535 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1536     mounting code.
1537 agaffney 264
1538 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1539     Took out unnecessary setting of random livecd root password. the cd already
1540     sets it randomly.
1541    
1542 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1543     Took out an unneeded step from CC's run()
1544    
1545 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1546     Attempt at detecting and adding windows partitions to lilo.
1547    
1548 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1549 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1550     partition. fixed misc exit_status => exitstatus typo.
1551 codeman 235
1552 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1553 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1554     resizing ntfs and ext2/3.
1555 agaffney 230
1556 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1557     Fixed partition() in x86Template so that it scans through logicals and deletes
1558 agaffney 229 before deleting containing extended partition. Also clears partition table to
1559     be safe before third pass.
1560 agaffney 228
1561 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1562     Added mount_network_shares. not able to test it from this computer.
1563     will test when i get back to school.
1564     also added start_portmap to the client_controller as an always-do.
1565     agaffney says this is needed for NFS mounts to work.
1566    
1567 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1568     Partial rewrite of partitioning code in x86Template. No longer shells out to
1569     parted to perform actions, now uses all pyparted calls. Code "works" in a
1570     test, but still needs lots of TLC. Also modified tests/install.py to work
1571     with x86Template and GLIClientConfiguration.
1572    
1573 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1574     Initial move of partitioning code from ArchTemplate to x86Template.
1575 agaffney 220
1576 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1577 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1578 codeman 222
1579     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1580 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1581     Test Install ran very well (skipping partitioning).
1582    
1583 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1584 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1585 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1586     some may still have eluded me.
1587 codeman 215
1588     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1589 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1590     Just finished mount_local_partitions in GLIArchitectureTemplate
1591    
1592 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1593     Added get_num_sectors() to GLIStorageDevice.
1594    
1595     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1596 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1597 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1598     from GLIInstallProfile.
1599 agaffney 205
1600 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1601     GLIStorageDevice returns "unknown" instead of "" for get_type()
1602    
1603 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1604 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1605     actually work. Commented out resizability checking code for speed.
1606 agaffney 183
1607 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1608     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1609     GLIStorageDevice at the suggestion of plors
1610    
1611 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1612     Added a function to GLIUtility to pull a value from a make.conf-style config
1613 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1614 agaffney 162
1615 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1616 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1617     network mounts from partition data structure in GLIInstallProfile
1618 agaffney 161
1619 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1620     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1621     can be resized.
1622    
1623 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1624     Added some of the final functions to GLIInstallTemplate.
1625     Yes this project is still active despite rare use of the Changelog!
1626    
1627 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1628     Added the GLIPartitionTools.py file. This is a temporary insertion of
1629     partitioning tools that will eventually go into their own package.
1630    
1631 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1632     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1633     for the program). Added __init__(install_profile, client_configuration) to
1634     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1635     to avoid constantly passing stuff every time we call a method.
1636    
1637 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1638    
1639     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1640     files without messing up all the other stuff in them. This will be used for making
1641     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1642    
1643 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1644    
1645     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1646     have a few basic things. I added two private methods. One is _depends(). This
1647     will be used for dependency checking (ie. unpacking a tarball requires that
1648     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1649     same syntax as os.system(), however, instead of being run in the liveCD
1650     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1651     isolated the code. Hope to work more this week to get this class formed...
1652    
1653 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1654    
1655     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1656     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1657     to allow for easier modification (mutable, rather than immutable objects). Updated
1658     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1659     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1660     Added initial unit test code.
1661    
1662 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1663    
1664     Added initial changelog. Setting up the basic structure of the CVS repository
1665     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1666     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20