/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1305 - (hide annotations) (download)
Fri Feb 17 17:47:40 2006 UTC (8 years, 4 months ago) by agaffney
File size: 69311 byte(s)
  src/GLIPortage.py:
  ignore blank packages passed to get_deps() and emerge()

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1305 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.599 2006/02/17 17:47:40 agaffney Exp $
5 codeman 773
6 agaffney 1302 *GLI-0.3 (12 Feb 2006)
7 agaffney 791
8 agaffney 1305 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
9     src/GLIPortage.py:
10     ignore blank packages passed to get_deps() and emerge()
11    
12 agaffney 1304 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
13     src/GLIUtility.py:
14     add get_chosts() function
15    
16 agaffney 1302 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
17     src/templates/x86ArchitectureTemplate.py:
18     pull old start/end sector values from somewhere that actually has them
19     add logic for extended partition to code that makes sure new end sector
20     doesn't overlap start sector of next partitions
21 agaffney 1303 don't freak out if partition can't be deleted
22 agaffney 1302
23 agaffney 1297 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
24     src/GLIPortage.py:
25     run env-update at the end of copy_pkg_to_chroot()
26    
27 agaffney 1295 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
28     src/templates/x86ArchitectureTemplate.py:
29     I'm a complete fscking dumbass. I recorded the end sector for partitions that
30     weren't being touched, but I never used it when recreating them...the end was
31     calculated from the size in MB instead :/
32    
33 agaffney 1288 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34     src/GLIArchitectureTemplate.py:
35     pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
36 agaffney 1294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
37 agaffney 1291 src/GLIPortage.py:
38     use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
39     src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
40     'resized' flag
41 agaffney 1288
42 agaffney 1285 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
43     src/GLIPortage.py:
44     short circuit and check vdb directly if package begins with '='
45    
46 codeman 1284 8 Feb 2006; Preston Cody <codeman@gentoo.org>
47     added more packages to extra_packages list in IP
48    
49 agaffney 1277 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
50     src/templates/x86ArchitectureTemplate.py:
51     10 tries to create filesystem instead of 3
52 agaffney 1280 src/GLIPortage, src/GLIArchitectureTemplate.py:
53     ignore_missing flag for copy_pkg_to_chroot()
54 agaffney 1277
55 agaffney 1269 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
56     src/GLIPortage.py:
57     copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
58    
59 agaffney 1264 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
60     src/net/server/gliserv.py:
61     fix handling of 404 for real files
62     src/net/server/GLIServerProfile.py:
63     look for 'hostname' in attributes instead of 'name'
64    
65 agaffney 1257 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
66     src/SimpleXMLParser.py:
67     initial support for 'include' in XML files
68 agaffney 1258 src/GLIStorageDevice.py:
69     initial support for %
70 agaffney 1259 src/GLIClientController.py:
71     add debugging statements to pre-install steps
72 agaffney 1257
73 codeman 1253 15 Jan 2006; Preston Cody <codeman@gentoo.org>
74     webgli/configfiles:
75     check for key in etc_files['rc.conf'] to fix key error
76     webgli/timezone: small fix.
77 codeman 1254 webgli/extrapackages: list-type fix
78     webgli/services: same
79     glimd: add/edit_client updates.
80 codeman 1253
81 codeman 1248 12 Jan 2006; Preston Cody <codeman@gentoo.org>
82     added configure.pyhtml to glimd. minor changes
83     to top and add_client. fixed up showargs.
84 codeman 1250 added execute.pyhtml
85     changed register clients line in gliserv for name->hostname.
86     updated TODO.
87 codeman 1248
88 codeman 1246 10 Jan 2006; Preston Cody <codeman@gentoo.org>
89     src/net/server/*:
90     added add/del/edit client/profile.pythml for glimd.
91     updated templates, showclients, and gliserv.
92    
93 agaffney 1245 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
94     src/net/server/*:
95     stupid threading module...
96    
97 codeman 1241 8 Jan 2006; Preston Cody <codeman@gentoo.org>
98     AT: rc.conf -> conf.d/clock
99    
100 agaffney 1223 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
101     src/GLIPortage.py:
102     show 'Calculating dependencies for ...' in subprogress bar at beginning of
103     emerge()
104     src/GLIArchitectureTemplate.py:
105     copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
106     in the chroot
107 agaffney 1228 remove _quickpkg_deps() and _portage_best_{visible,version}()
108 agaffney 1225 src/GLIUtility.py:
109     fail immediately in validate_uri() if provided URI can't be parsed
110 agaffney 1233 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
111 agaffney 1239 debug code in spawn()
112     use lower-level os.read() instead of file.read() because python sucks
113 agaffney 1227 src/templates/x86ArchitectureTemplate.py:
114     basic subprogress reporting for partitioning
115 agaffney 1231 total_steps was 1 too high
116 agaffney 1223
117 agaffney 1221 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
118     src/GLIUtility.py:
119     move parse_vdb_contents() to GLIPortage
120     src/GLIPortage.py:
121     remove all symlink fixups
122 agaffney 1222 ignore 'dir' entries in CONTENTS
123     call tar with -p
124 agaffney 1221
125 codeman 1220 5 Jan 2006; Preston Cody <codeman@gentoo.org>
126     AT: bootsplash is now gensplash
127     gliserv: add advanced_mode to shared_info
128     webgli: Added advanced mode. mostly just disables a few screens.
129    
130 agaffney 1205 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
131     src/GLIPortage.py:
132     get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
133     added emerge()
134 agaffney 1208 update sub-progress after each package is emerged
135     skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
136 agaffney 1211 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
137 agaffney 1216 remove link if it exists before moving content into place
138 agaffney 1205 src/GLIArchitectureTemplate.py:
139     install_packages() now calls emerge() in GLIPortage
140 agaffney 1208 change all calls to self._emerge() to self._portage.emerge()
141     comment out all emerge status checking...using exceptions now
142 agaffney 1214 call copy_pkg_to_chroot() directly for livecd-kernel
143 agaffney 1205
144 agaffney 1198 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
145     src/GLIArchitectureTemplate.py:
146     remove add_pkg_to_world() and copy_pkg_to_chroot()
147 agaffney 1201 copy installer.log to installer.log.failed on install failure
148 agaffney 1202 src/GLIUtility.py:
149     added get_keymaps()
150     spawn() takes any False argument for chroot instead of just None
151 agaffney 1198 src/GLIPortage.py:
152     copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
153 agaffney 1202 change copy_pkg_to_chroot() to work properly with use_root=False
154 agaffney 1204 figure PORTAGE_TMPDIR properly
155 agaffney 1198
156 agaffney 1197 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
157     src/net/server/html/*:
158     converted showclients, load/saveprofile
159    
160 agaffney 1194 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
161     src/GLIPortage.py:
162     exclude packages already in chroot vdb from binary deplist
163 agaffney 1195 chroot to use best_version for chroot's vdb
164 agaffney 1196 src/runtimedeps.py:
165     accept ROOT via commandline instead of env
166 agaffney 1194
167     25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
168 agaffney 1189 src/runtimedeps.py:
169 agaffney 1191 remove passing of ROOT
170 agaffney 1184 src/GLIPortage.py:
171 agaffney 1189 modify get_deps() to get deptree for each package and merge into final list
172 agaffney 1190 remove depgraph class
173     add debugging code to get_deps()
174 agaffney 1189 src/GLIArchitectureTemplate.py:
175     combine code for GRP/compile in install_packages() into one block
176 agaffney 1190 debugging code in install_packages()
177 agaffney 1184
178 agaffney 1194 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
179     src/runtimedeps.py:
180     initial commit
181     src/GLIPortage.py:
182     use separate script for GRP deps
183     remove calls to portage module
184    
185 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
186     src/GLIPortage.py:
187     initial commit
188 agaffney 1182 move some of portage function from GLIAT
189 agaffney 1183 flipped around a few function args
190 agaffney 1182 src/GLIArchitectureTemplate.py:
191     revamp install_packages() for new GLIPortage
192 agaffney 1181
193 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
194     src/GLIArchitectureTemplate.py:
195     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
196    
197 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
198     src/net/server/gliserv.py:
199     wrap generated code in a class to isolate it a bit better
200     302 redirects work
201 agaffney 1179 don't use cgi.escape() for <% %>
202 agaffney 1177 src/net/server/html/webgli/*:
203     load/save profile
204 agaffney 1178 src/GLIUtility.py:
205     change /sbin/lspci to just lspci
206 agaffney 1176
207 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
208     src/GLIClientController.py:
209     change ordering of statements in CC run() while loop to not go past the end
210     of the array
211 agaffney 1173 src/GLIArchitectureTemplate.py:
212     removed redundant bind mounts
213 agaffney 1172
214 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
215     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
216 codeman 1171 added a diagram by blackace from last night.
217     added the glossary in RTF format.
218 codeman 1170
219 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
220     x86AT: separated out emerge/configure from running of bootloader
221     added MBR drive support to lilo.
222     these changes will likely not work.
223     AT: added setup_and_run_bootloader step.
224    
225 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
226     src/net/server/gliserv.py:
227     call generated code in a function
228     src/net/server/html/webgli/*:
229     include top/bottom
230 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
231     src/GLIClientCongifuration.py:
232     install mode magic
233 agaffney 1163
234 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
235     src/GLIClientController.py:
236     use GLIException when there's an import problem
237 agaffney 1159 added debug code to show install_steps
238 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
239     add . to import path
240 agaffney 1160 proper path this time: ../../templates
241 agaffney 1162 src/GLIArchitectureTemplate.py:
242     add _portage_best_version() function
243 agaffney 1156
244 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
245     added initial glossary and gimli diagram to the docs directory.
246 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
247 codeman 1154
248 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
249     src/net/server/html/webgli/:
250     converted globaluse, localuse, networkmounts, portagetree, and stageselection
251 agaffney 1150 moved saveclientconfig stuff into clientconfig
252 agaffney 1151 moved saveconfigfiles into config files
253     converted etc_portage and makedotconf
254 agaffney 1152 converted bootloader and kernel
255 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
256 agaffney 1151 src/net/server/gliserv.py:
257     proper 404 handling for .pyhtml extension
258     HTML escape <% %> stuff
259 agaffney 1152 work around python's sucky regexes
260 agaffney 1153 src/GLIInstallProfile.py:
261     allow set_{rsync,ftp,http}_proxy() to accept empty values
262 agaffney 1149
263 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
264     src/net/server/gliserv.py:
265 agaffney 1148 initial commit of Legolas templating engine
266     302 redirects
267 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
268     minor changes for new code
269     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
270     initial commit of the conversion from the monolithic WebGLIHandler.py to the
271 agaffney 1148 one file per path Legolas goodness
272     partitioning[2-4] done
273 agaffney 1147
274 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
275     webgli: dhcp options in CC and post-install.
276     updated comparison chart.
277 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
278 codeman 1145
279 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
280     webgli_template.html: valign=top on left side.
281     webgli: fix bootloader boot_device. now working.
282 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
283 agaffney 1138
284 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
285     src/net/server/webgli_template.html:
286     increase padding for content cell to 7px and add colspan=2
287    
288 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
289     webgli: added graphic bar on top
290     webgli: added hover effects on the links on the left
291     webgli: re-rendered header_bg.png to stretch without artifacts
292    
293 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
294     webgli: make.conf disabling fixes for dynamic_stage3
295     fixed portage snapshot browse popup
296     all changes tested.
297     webgli: add debug mode to CC screen. the screen still needs lots of work.
298    
299 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
300     added debug mode question to gli-dialog
301     added CC proxies to CC networking for gli-dialog
302 codeman 1125 webgli: fixed skip CC networking if connection active
303     webgli: portage snapshot defaults to CD
304     webgli: bootloader mbr drive selection
305     webgli: USE flags unselectable if dynamic_stage3
306     webgli: manual extra packages and save button.
307    
308 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
309     src/GLIUtility.py:
310     change ping count to 2
311 agaffney 1121 docs/comparison.html
312     initial commit
313 agaffney 1119
314 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
315     src/templates/x86ArchitectureTemplate.py:
316     fix map() issue with grub code
317     replace kernel_names and initrd_names loops with one-liners
318    
319 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
320     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
321 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
322 codeman 1106 failure cleanup now an option for gli-dialog.
323 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
324     added comparison list and updated TODO!
325 codeman 1102
326 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
327     src/GLIArchitectureTemplate.py:
328     fix to stage1() debug code
329 agaffney 1098 fix to stage2() debug code
330 agaffney 1097
331 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
332     some more bootloader code fixes. forgot boot_device != mbr_device.
333 agaffney 1097
334     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
335     src/GLIStorageDevice.py:
336     fix to unallocated space merging when last one is after part 4
337 codeman 1096
338 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
339     src/GLIArchitectureTemplate.py:
340     small fix to debugging code in copy_pkg_to_chroot()
341    
342 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
343 codeman 1096 more bugfixes with bootloader code
344     gli-dialog side appears to work
345 codeman 1086
346 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
347 codeman 1080 initial adding of boot_device to backend.
348     initial boot_device support added to gli-dialog.
349 codeman 1096 some fixes of my poor coding
350 codeman 1077
351 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
352 codeman 1075 converted gli-dialog to use the install_package_list.
353     gtkfe has already been converted by AllanonJL
354 codeman 1076 new way working in gli-dialog now and added to webgli.
355 codeman 1077 added set/get_boot_device() to IP
356 codeman 1075
357 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
358     get_install_package_list added to InstallProfile. This can be used by the FEs
359    
360 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
361     src/templates/x86ArchitectureTemplate.py:
362     call ls with '-1 --color=no'
363    
364 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
365 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
366 codeman 1069
367 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368     src/GLIArchitectureTemplate.py:
369     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
370     confused
371    
372 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
373     removed protocols from rc.conf screens
374     finished initial rc.conf and make.conf in webgli
375    
376 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
377     src/net/server/gliserv.py:
378     add -h option to usage()
379 agaffney 1063 show time and request URI in debug mode
380 agaffney 1064 show client IP in debug mode
381 agaffney 1065 just use IP instead of trying to do a reverse lookup
382 agaffney 1062
383 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
384     src/net/server/gliserv.py:
385     'classier' 401 message
386     proper commandline parsing
387     help via -h
388     user/pass can be specificed via commandline option
389    
390 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
391 agaffney 1057 src/net/server/gliserv.py:
392 agaffney 1059 basic HTTP auth
393    
394     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
395     src/net/server/gliserv.py:
396 agaffney 1057 dynamic module reloading (yipee!)
397 agaffney 1058 send 'Last-Modified' header for real files
398     respond to HEAD with just headers
399 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
400     icons for drives
401    
402 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
403     src/net/server/handlers/WebGLIHandler.py:
404     initial 'pretty' partition table display support
405 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
406 agaffney 1044 radio buttons and pretty display work together
407     META redirect instead of javascript
408     pretty display stretches across entire screen
409 agaffney 1046 'Recommended layout' and 'Clear drive' functions
410 agaffney 1047 properly catch exceptions from do_recommended()
411 agaffney 1049 src/GLIArchitectureTemplate.py:
412     replace preinst, copy, postinst, rm steps with qmerge
413 agaffney 1050 whoops...that shouldn't have been commented out
414 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
415 agaffney 1052 more generic of symlink crappiness
416 agaffney 1053 new copy_pkg_to_chroot() actually works now
417 agaffney 1042
418 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
419     src/GLIStorageDevice.py:
420     initial generic disk support
421 agaffney 1040 fixes for add_partition() code
422 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
423     added support for creating generic disks
424 agaffney 1040 add new partition working
425 agaffney 1041 save and delete partitions
426 agaffney 1037
427 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
428     webgli: Partitioning making progress.
429    
430 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
431     src/GLIArchitectureTemplate.py:
432     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
433     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
434     dir) and works around /etc/gconf symlink problem
435    
436 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
437     webgli: lots of updates. preliminary partitioning. extra packages works.
438    
439 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
440     src/net/server/gliserv.py:
441     httpd now supports HTTPS and falls back to HTTP if not available
442 agaffney 1030 make fallback actually work
443 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
444     SecureSocketServer is now threaded
445    
446 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
447     src/net/client/gliclient.py:
448     try to use HTTPS for XMLRPC first and fallback to HTTP
449 agaffney 1028 pretend mode
450 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
451     HTTPS XMLRPC goodness from samyron
452 agaffney 1028 pass name of certificate
453 agaffney 1026
454 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
455     wegli: daemons and services screens done.
456    
457 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
458     webgli: networking and users screens
459     added return_redirect to handler.py
460 codeman 1022 loading and saving install/client profiles works for webgli now
461     Review also done
462 agaffney 1033
463     *GLI-0.2 (27 Oct 2005)
464 codeman 1025
465 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
466     src/templates/x86ArchitectureTemplate.py:
467     properly check for bootloader emerge exist status with exitsuccess()
468 agaffney 1010 log output of grub install command
469 agaffney 1011 add --batch --no-floppy to grub command
470 agaffney 1013 grubinstallstring only gets logged if debug is on
471 agaffney 1012 src/GLIUtility.py:
472     update progress bar to 100% when process finishes
473 agaffney 1009
474 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
475     src/GLIClientController.py:
476     added debugging code for the interaction between the 2 threads via Event()
477 agaffney 1003 src/GLIUtility.py:
478     doubled the buffer size in spawn()
479 agaffney 1004 bump buffer size up to 16384
480     only report progress in 5% increments
481 agaffney 1005 src/GLIArchitectureTemplate.py:
482     kernelpkgs.txt support code
483 agaffney 1006 above disabled because it sucks
484 agaffney 1007 added add_pkg_to_world()
485 agaffney 1002
486 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
487     src/GLIArchitectureTemplate.py:
488     use tar | tar to copy files in copy_pkg_to_chroot()
489     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
490    
491 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
492     DEBUGGING ADDED TO AT. verbose field added to CConfig.
493    
494 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
495     src/net/server/gliserv.py:
496     / maps to index.html
497     look for actual files in html/
498     src/net/html:
499     new template
500 agaffney 998 src/GLIUtility.py:
501     added parse_vdb_contents()
502     src/GLIArchitectureTemplate.py:
503     added copy_pkg_to_chroot()
504     added debug code to dynamic-stage3
505 agaffney 999 switch dynamic-stage3 to new method
506     lots of bug fixes from adding debug code
507 agaffney 993
508 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
509     webgli initial bootloader support + changed make.conf.
510 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
511 codeman 983
512 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
513 agaffney 982 src/GLIUtility.py:
514 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
515 agaffney 981 add unpack progress to portage snapshot
516 agaffney 982 use read() instead of readlines() in spawn()
517     only update progress bar for whole percents
518 agaffney 980
519 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
520     src/templates/x86ArchitectureTemplate.py:
521     change call to 'grub' to use GLIUtility.exitsuccess()
522 agaffney 977 add definition of 'build_mode' in _configure_lilo()
523 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
524     fix so subshell is called in root shell
525    
526 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
527     src/net/server/handlers/WebGLIHandler.py:
528     stage screen launches URI browser in sized window with various properties set
529    
530 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
531     src/misc/updategtkfe:
532     updated to actually work
533 agaffney 972 remove previous snapshot and extracted dir before downloading
534 agaffney 973 src/misc/updateglid:
535     updated to actually work
536 agaffney 974 src/templates/x86ArchitectureTemplate.py:
537     fixed bug where grub code was looking for 'root+root+file_name2'
538 agaffney 971
539 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540     src/net/server/handlers/WebGLIHandler.py:
541     URI browser
542 agaffney 970 added mirror selection
543 agaffney 969 src/GLIUtility.py:
544     ls via ssh strips off ending *
545 agaffney 968
546 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
547     more updates to webgli. stage selection.
548    
549 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
550     updated webgli with preliminary Network Mounts support.
551    
552 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
553     GenDialog: string formatting and yes/no label fixes.
554     added WebGLI template for gliserv.py
555     added WebGLIHandler as well as a definition for it in gliserv.py
556     updates to the webgli files even though they won't be there for long.
557 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
558     goes public.
559 codeman 952
560 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
561     src/net/server/gliserv.py:
562     override dict to not be so anal
563 agaffney 949 main server now loads separate module to handle requests
564 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
565 agaffney 949 split out profile URLs into separate handler function
566 agaffney 950 move handlers into subdirectory
567 agaffney 956 add Welcome and Clients handlers
568 agaffney 949
569 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
570     src/GLIUtility.py:
571     raise exception if password prompt received twice
572    
573 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
574 agaffney 944 src/GLIUtility.py:
575 agaffney 943 removed rot13ify()
576    
577     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
578 agaffney 935 src/net/server/gliserv.py:
579     allow for param to be passed multiple times in GET
580 agaffney 940 no XMLRPC functions return None
581 agaffney 941 modify POST request parsing to only create a list if needed
582 agaffney 942 fix GET request parsing so the list creation for multiple values works
583 agaffney 940 src/net/client/gliclient.py:
584     various typo and type mismatch fixes
585     exit after exception
586 agaffney 935
587 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
588     src/net/client/gliclient.py:
589     initial commit
590 agaffney 934 pass MAC to XMLRPC functions
591     src/net/server/GLIServerProfile.py:
592     rename GLIClientsProfiles to GLIServerProfile
593 agaffney 933
594 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
595     src/net/server/gliserv.py:
596     now handles POST requests
597     move majority of request handling code to common_handler() to reduce code
598     duplication
599 agaffney 931 profile loading
600     client reg via XMLRPC goes into SharedInfo()
601     /showclients redesign
602     template fixes
603 agaffney 932 allow handler functions to add/change headers
604     save profile
605 agaffney 930
606 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
607     src/net/server/GLIClientsProfiles.py:
608     initial commit
609     src/net/server/template.html:
610     initial commit
611     src/net/server/gliserv.py:
612     add template mojo
613    
614 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
615     src/net/server/gliserv.py:
616     XMLRPC mojo
617    
618 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
619     src/GLIArchitectureTemplate.py:
620     add code in _edit_config() to comment line where variable is defined
621     previously
622 agaffney 920 insert new line under previous definition of variable if it exists
623 agaffney 921 small _edit_config() cleanup
624 agaffney 923 src/GLIStorageDevice.py:
625     add clear_partitions() function
626 agaffney 924 new sizes for recommended partition layout
627 agaffney 925 automatically calculate swap size for recommended layout
628 agaffney 919
629 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
630     src/templates/x86ArchitectureTemplate.py:
631     fat16 mojo
632    
633 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
634     src/GLIStorageDevice.py:
635     prevent do_recommended() from being run twice
636 agaffney 916 rewrite do_recommended() to be more robust
637 agaffney 917 src/GLIArchitectureTemplate.py:
638     rework _edit_config() to not write duplicate entries
639 agaffney 914
640 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
641     src/GLIStorageDevice.py:
642     added do_recommended() function to automatically created 256M/1G/* layout
643    
644 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
645     src/gli-dialog.py: added set_distcc to the list
646     GenDialog: added set_distcc. untested.
647     IP: added install_distcc flag.
648     AT: added install_distcc function based on the flag. runs after build_kernel
649 codeman 911 changed AT spawn command for distcc for nodeps.
650 codeman 907
651 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
652     src/GLIUtility.py:
653     add rot13ify() function
654    
655 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
656     src/GenDialog.py
657 codeman 905 added a sentence of text. unchecking support added.
658 codeman 904
659 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
660     src/GLIUtility.py
661     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
662     src/GenDialog.py
663 codeman 902 still working on extra_packages. transformed the list to new format.
664     added GRP indication to list. untested.
665 codeman 901 TODO lists updated.
666     src/fe/dialog/gli-dialog.py
667     spelling mistook.
668    
669 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
670     src/GLIUtility.py:
671     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
672    
673 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
674     src/GLIUtility.py:
675     add get_directory_listing_from_uri()
676     add http support to above
677 agaffney 892 add ftp support to above
678 agaffney 893 add scp support to above
679 agaffney 891 src/GLIArchitectureTemplate.py:
680     "0" instead of 0 for key of single-element dict passed to _edit_config()
681 agaffney 889
682 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
683     value_only -> only_value
684    
685 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
686     gutted out all of etc_portage structure since it is now all handled by
687     etc_files
688    
689 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
690     src/GLIArchitectureTemplate.py:
691     install_packages() sends progress update notifications
692 agaffney 876 src/templates/x86ArchitectureTemplate.py:
693     increase sleep to 5s between format tries
694 agaffney 882 src/GLIClientController.py:
695     pass 'self' to AT instead of 'self._pretend'
696 agaffney 874
697 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
698     logger -> logger.log in x86AT
699    
700 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
701     added set_etc_portage to IP. debugging gli-d's support for it.
702    
703 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
704     src/templates/x86ArchitectureTemplate.py:
705     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
706    
707 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
708     src/GLIArchitectureTemplate.py:
709     add _portage_best_version() function and rework install_packages() to allow
710     for future X of Y tracking
711 agaffney 860 Use best_visible instead of best_version
712 agaffney 862 tracked down and fixed missing = causing empty install extra packages
713 agaffney 864 use = when emerging also
714 agaffney 865 quickpkg hokey pokey
715 agaffney 867 run _get_packages_to_emerge() again with -pk
716 agaffney 857
717 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
718     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
719     the end of install_packages.
720 codeman 850 added updateglid to /src/misc
721 codeman 851 updated all core files with new GPL notice and copyright statement.
722 codeman 848
723 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
724     src/GLIUtility.py:
725     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
726     a snapshot in /mnt/cdrom/snapshots/
727 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
728 agaffney 846 change calls to extra package special case functions to 'self.blah'
729 agaffney 839
730 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
731     src/ArchTemplate: changed "voodoo".
732 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
733     normal emerge sync fails.
734 codeman 836 removed get_sources_from_cd because it is obsolete.
735     add special cases to install_packages. remove fatal exception on package
736     install failure b/c the box will still be bootable.
737 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
738     handled in the FEs.
739 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
740     awaiting testing.
741 codeman 830
742 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
743     src/GLIStorageDevice.py:
744     global try/except block around fs resizable detection code
745 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
746     install-failed cleanup function
747 agaffney 826
748 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
749     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
750    
751 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
752 codeman 814 GLIGenDialog:
753     add drive choices for loaded configs.
754     force snapshot for dynamic_stage3
755     init the snapshoturi input to the cd snapshot if not already selected.
756     if dynamic_stage3, skip the make.conf step.
757     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
758     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
759 codeman 812
760 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761     src/GLIArchitectureTemplate.py:
762     manually call MAKEDEV in stage3-dynamic code
763 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
764 agaffney 815 src/GLIUtility.py:
765     add beginning of validate_uri() function
766 agaffney 817 add file:/// support to validate_uri()
767 agaffney 822 single quotes when setting livecd password
768 agaffney 811
769 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
770     src/GLIGenDialog.py:
771     change getmountpoint() to get_mountpoint()
772 agaffney 808 src/misc/updategtkfe:
773     committed script to automatically download latest snapshot and run gtkfe
774 agaffney 809 src/templates/x86ArchitectureTemplate.py:
775     fix _configure_lilo_add_windows() for IP -> GLISD stuff
776 agaffney 810 src/GLIArchitectureTemplate.py:
777     give tmp_minor an initial value in mount_local_partitions so that the value
778     remain from the previous drive
779 agaffney 807
780 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
781     src/templates/x86ArchitectureTemplate.py:
782     Fix _configure_lilo() for IP using GLISD stuff
783 agaffney 806 src/GLIArchitectureTemplate.py:
784     install_cron_daemon() treats "none" specially
785 agaffney 805
786 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
787     old patch from Steven Mertens to resolve bug #96642
788 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
789     strings renamed for global use if necessary.
790 codeman 803 fix all three parts of bug 102291
791 codeman 804 disable set_etc_portage until fully-written.
792 codeman 801
793 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
794     src/GLIClientController.py:
795     lower-case http/ftp proxy envvars
796    
797 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
798     src/GLIClientController.py:
799     log end of pre_install steps to aid in debugging
800 agaffney 798 src/templates/x86ArchitectureTemplate.py:
801     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
802 agaffney 797
803 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
804     src/GLIArchitectureTemplate.py
805     check to make sure that the device node we're wait for to exist isn't of
806     type 'free'
807    
808 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
809     src/GLIGenDialog.py:
810     convert install_packages to list in set_extra_packages()
811 agaffney 793 check return code of checklist() call in "Manual" section
812 agaffney 794 *actually* fix the first problem
813 agaffney 792
814 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
815     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
816     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
817    
818 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
819     src/GLIArchitectureTemplate.py:
820     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
821    
822 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
823     Add CDATA support to SimpleXMLParser and add utility functions for it.
824    
825 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
826     src/GLIArchitectureTemplate.py:
827     Fix case where vixie-cron is specified as a full package atom, as we still
828     don't want to run 'crontab /etc/crontab' for it.
829    
830 agaffney 788 *GLI-0.1 (3 Aug 2005)
831    
832 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
833     add scp to list of is_uri() so GenDialog doesn't complain.
834 codeman 769 fixed livecd-kernel bug in bootloader code.
835 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
836     change bootloader to allow for both initrd and initramfs.
837 codeman 777 fix IP for dynamic_stage3.
838 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
839 codeman 777
840 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
841     Added full scp:// URI support to get_uri() in GLIUtility
842 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
843     Remove print statement from scp:// code.
844 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
845 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
846 agaffney 770 Check to make sure pkg can be split on / and some debugging code
847 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
848 codeman 777 SimpleXMLParser handles True/False/None correctly now
849 agaffney 778 Comment out above fix
850 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
851 codeman 764
852 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
853     Removed a FIXME in the GLIClientConfiguration that is no
854     longer needed.
855    
856 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
857     Default to x86 in ClientConfig
858 agaffney 761 Typo in build-a-stage3 code.
859     Remove MAKEDEV call in build-a-stage3 postscript.
860 agaffney 760
861 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
862     Rewrote init of IP for gli-d. Other GenDialog updates.
863     allow network_type to be None in CConfig.
864    
865 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
866     Add _dynamic_stage3 option to IP.
867     Add check for that option to dynamic stage3 code in ArchTemplate.
868 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
869     Fix serialization of dns-servers in ClientConfig.
870 agaffney 755
871 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
872     changed default values of cron/logger in IP.
873     moved GenDialog IP init out to the individual files. gli-dialog's version
874     will change quite a bit.
875    
876 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
877     added ppcArchTemplate. blank now. working on yaboot.
878 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
879     skeleton implementation of _configure_yaboot.
880     small fixes to other templates.
881 codeman 750
882 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
883     GenDialog updates. changed comment in IP.
884    
885 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
886 robbat2 743 src/GLIInstallProfile.py:
887     Fix codeman's screwup of changing the service seperator to ',' in the parser
888     without changing it in the serialization code! Also document this in a
889     comment so you find it easier. Everybody needs to make sure they update
890     their install profiles!
891    
892     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
893 robbat2 742 src/GLIArchitectureTemplate.py:
894     Fix casting of list to string and concat of None with string, as well as
895     commented prototype of checking that mounting actually worked (found a case
896     where mount can return success, but the mount won't be done).
897    
898     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
899 robbat2 740 src/templates/x86ArchitectureTemplate.py:
900 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
901     checking for the device, and sleeping 1 second each time.
902    
903     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
904     src/templates/x86ArchitectureTemplate.py:
905 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
906     bootloader works again. Also rename _install_{grub,lilo} to
907     _configure_{grub,lilo} since they don't install the loaders anymore
908     themselves.
909    
910 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
911     fix global USE flags to not include the arch types at the end.
912     updates to GenDialog and gli-d.
913    
914 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
915     fixing bootloader code for no initrd and initrd->initramfs naming change.
916    
917 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
918     Proper comments and parameters to GLIException in install_mta()
919 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
920 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
921     list_tarball_from_mirror() to eliminate blank last item.
922 agaffney 733
923 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
924     Added stage3 generation code.
925    
926 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
927     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
928     Mild changes to GenDialog.
929    
930 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
931     Remove separate install step configure_rc_conf() since it's handled by
932     update_config_files()
933     Make a copy of newvalues in _edit_config() so quotes aren't added when the
934     function is called twice on the same file.
935    
936 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
937     Missing \ in sed in _get_packages_to_emerge()
938 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
939 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
940     _get_packages_to_emerge()
941 agaffney 726
942 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
943     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
944     in the dialog.py gauge code.
945    
946 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
947     Add code to update_config_files() to go through etc_files and update stuff.
948 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
949 agaffney 724 Only use float() in partition xml parsing code if type == "free"
950 agaffney 720
951 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
952     finished almost all internationalization of GenDialog.
953 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
954 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
955 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
956 codeman 718
957 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
958     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
959    
960 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
961     fix extra entry in list_mirrors()
962     beginning internationalization runthrough.
963    
964 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
965     added dialog.py to /src temporarily until it gets accepted upstream.
966 codeman 714 fix for unused value in form in dialog.py and changed heights.
967     fix GenDialog forms.
968 codeman 713
969 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
970     Changed hostname/domainname for new baselayout.
971     Changed _add_to_runlevel errors to logs.
972     Updated TODO list to show status of GenDialog
973     More updates to GenDialog including two checklists that probably won't work.
974 codeman 711 update IP to use comma-separated list instead of space separated for services.
975 codeman 710
976 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
977     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
978     GenDialog as it gets closer to completion.
979    
980 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
981 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
982     instead of int() in add_partition_device_partition() for minor (closes 96804)
983 agaffney 704
984     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
985     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
986     instead of 'interfaces[interface][1]' since DHCP uses that field for its
987     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
988    
989 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
991 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
992 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
993 agaffney 704 Fix undefined variable 'output' issue in spawn().
994 agaffney 697
995 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
996     More updates to GenDialog and gli-d.
997    
998 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
999     Modify list_mirrors() to return a list of mirror URL/name pairs.
1000    
1001 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1002     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1003     get subarch.
1004    
1005 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1006     Backend partitioning will create disklabel is none exists. Installprofile
1007 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
1008     mount_local_partitions() to remember device along with minor in the
1009 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1010     add else block to log unsupported netmount types to mount_network_shares()
1011 agaffney 691
1012 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1013     src/GLIArchitectureTemplate.py:
1014 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
1015     src/fe/cli/clife.py:
1016     Logging system.
1017     src/GLIUtility.py, src/GLIStorageDevice.py:
1018     Add comments about re-writes needed for boxes without sysfs.
1019    
1020     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1021     src/GLIArchitectureTemplate.py:
1022 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1023     'make dep' call for custom compile. build_mode support for prepare-only and
1024     none types completed. custom compile function chains shell functions in
1025     spawned script, to allow for catching all errors.
1026    
1027 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1028     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1029     and GenDialog. other gendialog updates as well. kernel updates untested.
1030    
1031 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1032     src/GLIInstallProfile.py:
1033     Change structure of etc-portage stuff. The serialization was broken before my
1034     last commit, and I am the only person that's ever used it. The new schema is
1035     as follows:
1036     <etc-portage>
1037     <file name="package.mask"/>
1038     <file name="package.unmask">
1039     <entry atom="sys-kernel/openmosix-sources"/>
1040     </file>
1041     <file name="package.use">
1042     <entry atom="sys-libs/db">
1043     -java
1044     </entry>
1045     <entry atom="dev-libs/cyrus-sasl">
1046     -ldap
1047     </entry>
1048     </file>
1049     </etc-portage>
1050    
1051    
1052 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1053     src/GLIInstallProfile.py:
1054     Add new entry for gli-profile/kernel-build-method item. Add missing
1055     serialize_etc_portage (temporary). Make serialize_make_conf always print the
1056     keys in the same order.
1057    
1058 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1059     src/GLIArchitectureTemplate.py:
1060 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1061     was repeatedly appended to make.conf.
1062    
1063     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1064     src/GLIArchitectureTemplate.py:
1065 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
1066     successfully mounted swap device for using swapoff. Add proper error checking
1067     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1068     'file'. Clean up some redundant code (thanks to pychecker).'
1069    
1070 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
1072 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1073     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1074 agaffney 668
1075 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1076     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1077     in add_network_interface.
1078    
1079 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1080     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1081     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1082 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1083     prepare_chroot.
1084 robbat2 664
1085 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1086     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1087     +src/fe/installer-gtk:
1088     Add new automated CLI frontend. Add scripts that are the intended means to
1089     use each frontend.
1090    
1091 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1092 robbat2 663 src/GLIClientController.py:
1093     Add null type to network config, for cases where the interface is already up
1094     and should not be touched (netboot for example).
1095    
1096     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1097 robbat2 652 src/GLIArchitectureTemplate.py:
1098 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1099     string!. Try to use binary packages if available by default.
1100    
1101     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1102     src/GLIArchitectureTemplate.py:
1103 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
1104     actually exists before we try to add it. set_services phase must take place
1105     after the package installation, otherwise the init scripts might not exist.
1106     Find the correct init script for the cron and logging daemons, and add that
1107     instead of the package atom.
1108    
1109     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1110     src/GLIArchitectureTemplate.py:
1111 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1112     usage of 'file' to 'contents' for the variable name, as it shadows
1113     __builtin__.file.
1114    
1115     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1116     src/GLIArchitectureTemplate.py:
1117 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
1118     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1119     for 'none' kernel config for build_kernel phase. Put kernel_script in
1120     /var/tmp instead of /root for build_kernel phase.
1121    
1122 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1123     Rename mta variables to match syslog/cron variables.
1124    
1125 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1126 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1127     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1128     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1129     src/templates/.cvsignore, src/tests/.cvsignore:
1130     Refactor partition formatting again to include error checking. Allow 'none'
1131     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1132    
1133     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1134 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1135     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1136     only have a single spawn call.
1137    
1138 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1139     refixed samyron's fix of set_architecture_template.
1140    
1141 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1142     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1143     be executable.
1144    
1145 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1146     Fixed one of the FIXME's in the ClientConfiguration. There is now some
1147     error checking when you call set_architecture_template.
1148    
1149 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1150     moved the mkfsopts input to the partition options menu instead of the during
1151     the creation process. updated GenDialog to say it supports reiserfs v3.
1152    
1153 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1154     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1155     Complete support for 'mkfsopts' parameter in main system and dialogfe.
1156     Add support for other partition types to dialogfe.
1157     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1158     avoid integer overflows and wraparounds.
1159    
1160 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1161     Removed start/end from XML output and added mkfsopts to partitioning info.
1162 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1163 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1164 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
1165     partitioning. Fix free space overwriting bug. Remove a few unused functions
1166 agaffney 640 from rewrite. Fix call to get_partition_at()
1167 agaffney 631
1168 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1169     Updates to GenDialog and dialogfe.
1170    
1171 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1173 agaffney 627
1174 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1175     more GenDialog updates to partitioning.
1176    
1177 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1178     Indenting issue in GLISD/get_ordered_partition_list.
1179     updates to GenDialog partitioning and added default UTC for timezone in IP.
1180    
1181 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1182     Added GLISD.get_model()
1183    
1184 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1185     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1186     More updates to GenDialog :)
1187    
1188 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1189     Added get_interface_realname() function.
1190    
1191 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1192     Added auto-save of CConfig and copying to new /root after install.
1193     yet even more GenDialog updates.
1194    
1195 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1196     removed print statement from GLISD. more updates to GenDialog.
1197    
1198 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1199 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1200 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1201 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1202     places in GLIClientConfiguration.
1203 agaffney 608
1204 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1205     Fix mount_local_partitions(), configure_fstab(), and
1206 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1207 agaffney 601 A few more fixes for templates/x86Archtemplate
1208 agaffney 599
1209 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1210     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1211     a work in progress.
1212    
1213 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1214     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1215     directly. GLISD can now handle data imported from XML.
1216    
1217 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1218     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1219     handle blank (no disklabel) disks.
1220    
1221 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1222     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1223     up, documented, and separated out serialization and grouped all sections.
1224    
1225 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1226     Reorganization of ClientConfiguration and gutting of unused functions.
1227     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1228    
1229 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1230     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1231    
1232 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1234 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1235     copies it into /mnt/gentoo/root
1236 agaffney 588
1237 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1238     Moved URI parsing into new function parse_uri()
1239    
1240 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1241     Added XMLParser module.
1242    
1243 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1244     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1245 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1246 agaffney 580
1247 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1248     Updated finishing_cleanup for new unmounting method from agaffney.
1249    
1250 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1252 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1253     unicode support to is_realstring().
1254 agaffney 575
1255 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1256 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1257 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1258 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1259     instead of --nocolor.
1260 agaffney 571
1261 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1262     Added GLIGenDialog.py to make a generic class for the dialog functions that
1263 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1264     date changes. 2004->2005.
1265 codeman 566
1266 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1267     Removed 'quiet=True' from spawn() calls
1268    
1269 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1270     Updated GLIUtility with patches from chotchki. Also added documentation
1271    
1272 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1273     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1274     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1275     from bug #89683, mostly touchups.
1276    
1277 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1278     GLIStorageDevice cleanup patch from bug #91761
1279    
1280 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1281     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1282 agaffney 553 _edit_config(). Error logging casts 'error' to str
1283 agaffney 551
1284 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1285 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1286     code to CC to handle exceptions *not* thrown by the installer itself.
1287 agaffney 548
1288 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1289     get_max_mb_for_resize() returns -1 if not self.resizeable
1290    
1291     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1292 agaffney 539 More dirty rsync hacks :-/
1293    
1294 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1295     Patches from chotchki (bug #90325) to improve CC networking. untested.
1296    
1297 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1299 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1300 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1301 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1302 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1303     _get_packages_to_emerge()
1304 agaffney 528
1305 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1306     Added group-adding code to set_users in ArchTemplate
1307    
1308 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1309     Added post-install script code
1310    
1311 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1312     Fixed encapsulation issues in GLIClientController (bug #90141)
1313    
1314 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1315     Update resizing code in GLIStorageDevice
1316    
1317 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1318     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1319    
1320 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1321     Reverted change to ArchTemplate and added support for commented line in old
1322     code.
1323    
1324 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1325     Changed _edit_config() to modify value in-place instead of commenting out and
1326     adding the new value to the end of the file.
1327    
1328 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1329     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1330     Also updated TODO list.
1331    
1332 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1333     Use blackace's one-liner to add comments for all function for use with
1334     pythondoc.
1335    
1336 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1337     Moved 'end >= device_sectors' check out of loop to check for next partition's
1338 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1339 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1340     point of logical is now adjusted along with start.
1341 agaffney 503
1342 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1343 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1344 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1345     key in partition information due to new partition code leaving them as float.
1346 agaffney 497
1347 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1349 agaffney 494
1350 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1351     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1352    
1353     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1354 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1355    
1356 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1358     sed to properly strip out junk.
1359 agaffney 481
1360 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1361 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1362 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1363 codeman 475
1364 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1365     Fixed indent problem in GLICController
1366    
1367 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1368     Check for disklabel type "loop" and use the device name without a minor.
1369    
1370 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1371     Remove /tmp/compile_output.log and /var/log/install.log when install is
1372 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1373 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1374 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1375 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1376 agaffney 453
1377 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1379     when unpacking tarball.
1380 agaffney 451
1381 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1382 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1383     filesystem_tools code.
1384 codeman 443
1385 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1386     Changed the print statements to logging in the partitioning BE code.
1387     the logger may need to be imported to the x86archtemplate. unknown yet.
1388 codeman 432 Added the finishing_cleanup function.
1389 codeman 433 added a fix to the logger from BenUrban
1390 codeman 427
1391 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1392     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1393     URIs. The blank uri check has been commented out.
1394 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1395 codeman 422
1396 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1397     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1398    
1399 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1400     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1401 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1402 agaffney 415
1403 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1404     small changes to setup_network_post. moved adding to runlevel of net.x to
1405     after the device gets symlinked. added domainname runlevel command.
1406    
1407 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1408 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1409 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1410     spawn() call in livecd-kernel code to pass environment variables.
1411 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1412     the install profile if available.
1413 agaffney 402
1414     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1416     to handle installing the livecd kernel into the new system.
1417    
1418 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1419     should emerge hotplug and coldplug before adding them to runlevel.
1420    
1421 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1422 codeman 395 took chroot out of grub_install command.
1423    
1424     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1425     Changed chroot wrapper code in spawn() to write the wrapper the python way
1426     instead of the bash way to avoid quote conflicts. Added
1427 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1428 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1429     as it breaks the piping.
1430 codeman 390
1431 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1432     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1433    
1434 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1435     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1436 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1437 agaffney 389 GLIInstallProfile.
1438 agaffney 385
1439 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1440 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1441     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1442     into /mnt/gentoo in prepare_chroot()
1443 agaffney 379
1444 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1445     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1446 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1447     to start/end sectors
1448 agaffney 375
1449     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1450 agaffney 374 Add 2>&1 to cmd in spawn()
1451    
1452 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1453     Modified GLIUtility.exitsuccess() to work with return value from
1454 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1455     creates wrapper script for commands run inside chroot so multiple commands
1456 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1457     for the generated script from spawn()
1458 agaffney 369
1459 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1460     Removed default values for stage tarball URI and portage tree URI from
1461     InstallProfile. These should be set by the FEs. also added services step to
1462     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1463     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1464    
1465 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1466     Small fix for setting the default gateway. Also added feature to dialogfe.
1467    
1468 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1469     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1470    
1471 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1472 codeman 346 Fixed a bunch of true -> True typos. lots of em
1473 codeman 347 only write new resolv.conf if there are dns servers listed.
1474 codeman 345
1475 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1476     Commented out 'display_on_tty8=True' in start_portmap()
1477    
1478 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1479     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1480    
1481 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1482 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1483     lang parameter to __init__()
1484 codeman 331
1485     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1486     updates to TODO list.
1487 esammer 4
1488 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1489 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1490     'emerge -p blah'
1491 agaffney 322
1492 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1493 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1494     added quickpkg to TODO list
1495 codeman 319
1496 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1497     Changed the raising of 'warning' exceptions to a simple log of the error
1498     so that the installer can continue.
1499    
1500 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1501     Some big changes. First, changed most output to display_on_tty8.
1502     Second, added log lines to all templates. Some smaller fixes such as typos.
1503     Also did some cleanups of old commented lines.
1504    
1505 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1507 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1508 agaffney 310
1509 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1510     more updates to TODO list. hopefully we'll soon start removing items instead
1511     of adding them.
1512    
1513 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1514     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1515    
1516 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1517 codeman 295 updated TODO list. (again)
1518 codeman 293
1519 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1520     changed output of portmap start to display_on_tty8.
1521     fixed bootloader for udev and multiple kernels
1522 codeman 288 fixed custom kernel config (again)
1523 codeman 286
1524 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1525     changed default value of CC._enable_ssh to True because this is smart.
1526 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1527 codeman 281
1528 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1529     partition() now waits until after it checks for partition flags before delete
1530     the partitions :P
1531    
1532 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1533 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1534 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1535     blank.
1536 agaffney 271
1537 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1538     Various fixes related to the add_users function. Still not yet finished.
1539 codeman 269 Added things to the TODO list. Lets start using that!
1540 codeman 268
1541 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1542     Added code to x86Template to format newly created partitions. Also added
1543 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1544 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1545     mounting code.
1546 agaffney 264
1547 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1548     Took out unnecessary setting of random livecd root password. the cd already
1549     sets it randomly.
1550    
1551 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1552     Took out an unneeded step from CC's run()
1553    
1554 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1555     Attempt at detecting and adding windows partitions to lilo.
1556    
1557 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1558 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1559     partition. fixed misc exit_status => exitstatus typo.
1560 codeman 235
1561 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1562 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1563     resizing ntfs and ext2/3.
1564 agaffney 230
1565 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1566     Fixed partition() in x86Template so that it scans through logicals and deletes
1567 agaffney 229 before deleting containing extended partition. Also clears partition table to
1568     be safe before third pass.
1569 agaffney 228
1570 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1571     Added mount_network_shares. not able to test it from this computer.
1572     will test when i get back to school.
1573     also added start_portmap to the client_controller as an always-do.
1574     agaffney says this is needed for NFS mounts to work.
1575    
1576 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1577     Partial rewrite of partitioning code in x86Template. No longer shells out to
1578     parted to perform actions, now uses all pyparted calls. Code "works" in a
1579     test, but still needs lots of TLC. Also modified tests/install.py to work
1580     with x86Template and GLIClientConfiguration.
1581    
1582 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1583     Initial move of partitioning code from ArchTemplate to x86Template.
1584 agaffney 220
1585 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1586 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1587 codeman 222
1588     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1589 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1590     Test Install ran very well (skipping partitioning).
1591    
1592 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1593 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1594 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1595     some may still have eluded me.
1596 codeman 215
1597     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1598 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1599     Just finished mount_local_partitions in GLIArchitectureTemplate
1600    
1601 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1602     Added get_num_sectors() to GLIStorageDevice.
1603    
1604     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1605 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1606 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1607     from GLIInstallProfile.
1608 agaffney 205
1609 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1610     GLIStorageDevice returns "unknown" instead of "" for get_type()
1611    
1612 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1613 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1614     actually work. Commented out resizability checking code for speed.
1615 agaffney 183
1616 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1617     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1618     GLIStorageDevice at the suggestion of plors
1619    
1620 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1621     Added a function to GLIUtility to pull a value from a make.conf-style config
1622 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1623 agaffney 162
1624 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1625 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1626     network mounts from partition data structure in GLIInstallProfile
1627 agaffney 161
1628 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1629     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1630     can be resized.
1631    
1632 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1633     Added some of the final functions to GLIInstallTemplate.
1634     Yes this project is still active despite rare use of the Changelog!
1635    
1636 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1637     Added the GLIPartitionTools.py file. This is a temporary insertion of
1638     partitioning tools that will eventually go into their own package.
1639    
1640 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1641     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1642     for the program). Added __init__(install_profile, client_configuration) to
1643     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1644     to avoid constantly passing stuff every time we call a method.
1645    
1646 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1647    
1648     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1649     files without messing up all the other stuff in them. This will be used for making
1650     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1651    
1652 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1653    
1654     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1655     have a few basic things. I added two private methods. One is _depends(). This
1656     will be used for dependency checking (ie. unpacking a tarball requires that
1657     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1658     same syntax as os.system(), however, instead of being run in the liveCD
1659     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1660     isolated the code. Hope to work more this week to get this class formed...
1661    
1662 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1663    
1664     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1665     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1666     to allow for easier modification (mutable, rather than immutable objects). Updated
1667     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1668     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1669     Added initial unit test code.
1670    
1671 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1672    
1673     Added initial changelog. Setting up the basic structure of the CVS repository
1674     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1675     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20