/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1478 - (hide annotations) (download)
Wed Jul 19 23:43:25 2006 UTC (7 years, 9 months ago) by wolf31o2
File size: 79197 byte(s)
Added launch variable to the end of each try-run with auth, which should cause this to function properly.  Of course, more testing is needed.

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 wolf31o2 1362 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 wolf31o2 1478 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.662 2006/07/19 23:43:25 wolf31o2 Exp $
4 esammer 4
5 wolf31o2 1477 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
6 wolf31o2 1478 Added launch variable to the end of each try-run with auth, which should
7     cause this to function properly. Of course, more testing is needed.
8    
9     19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
10 wolf31o2 1477 Fix a missed space in the installer script.
11    
12 agaffney 1476 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
13     src/GLIClientController.py:
14     log version-stamp
15    
16 wolf31o2 1475 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
17     Updated the installer script to allow specifying the front-end to run from
18     the command line. Currently, it only supports dialog and gtk. It still needs
19     some testing, however.
20    
21 codeman 1471 9 July 2006; Preston Cody <codeman@gentoo.org>
22 wolf31o2 1475 src/GLIGenDialog.py:
23 codeman 1471 make lilo only show up for x86 if non-networkless
24    
25 codeman 1470 25 Jun 2006; Preston Cody <codeman@gentoo.org>
26 wolf31o2 1475 src/GLIGenDialog.py:
27 codeman 1470 adding code to auto-add doscsi if a scsi drive detected.
28     this code is also in the gtkfe already
29    
30 agaffney 1469 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
31     src/GLIPortage.py:
32     pass proper PORTAGE_TMPDIR
33    
34 agaffney 1461 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
35     src/GLIUtility.py:
36     fix list_mirrors() to ignore <uri> lines that don't end on the same line
37    
38 wolf31o2 1475 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
39 codeman 1459 Added code to the mta step in AT to parse the install packages list and
40     look for mtas and if it finds it emerge it.
41 codeman 1460 Initial attempt at moving extra_packages early in the setup to only show
42     local USE flags relating to those packages.
43 codeman 1463 .. abandoned local USE project. no right way to do it.
44 codeman 1459
45 agaffney 1457 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
46     src/GLIUtility.py:
47     minor tweak to regex for parsing mirrors.xml
48    
49 agaffney 1442 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
50     src/templates/x86ArchitectureTemplate.py:
51     make use of strict_start and strict_end in partition recreation
52    
53 agaffney 1437 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
54     src/templates/x86ArchitectureTemplate.py:
55     add strict_start and strict_end parameters to _add_partition()
56     add _find_current_minor_for_part() function to help with resizing
57     fix logical/extended logic in _partition_delete_step()
58     in _partition_resize_step(), delete, recreate at new size, resize, delete
59     call resize2fs with no size argument so it fills entire partition
60     more logging
61 agaffney 1438 only delete, recreate, resize, delete if growing
62     pass new size to resize2fs in K
63 agaffney 1437
64 agaffney 1436 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
65     src/GLIStorageDevice.py:
66     call reorder_minors() from tidy_partitions() instead of
67     set_partitions_from_disk()
68     add code to reorder_minors() to take extended/logical into consideration with
69     non-free partitions
70    
71 wolf31o2 1475 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
72 codeman 1429 added a check of the length of the directory in /usr/src if under 6 characters
73     should fix bug 131809
74    
75 agaffney 1424 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
76     src/GLIArchitectureTemplate.py:
77     automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
78     and livecd-kernel
79    
80 codeman 1421 16 Apr 2006; Preston Cody <codeman@gentoo.org>
81     src/GLIGenDialog.py:
82     change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
83    
84 agaffney 1419 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
85     src/GLIInstallProfile.py:
86     change kernel-modules to not be so stupid
87    
88 wolf31o2 1475 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
89 codeman 1418 GLIMD: fix display problem with execute.pyhtml.
90     make tables better.
91    
92 agaffney 1411 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
93     src/GLIInstallProfile.py:
94     fix handling of int/float for minor
95 agaffney 1412 src/templates/x86ArchitectureTemplate.py:
96     save/restore partition name
97     src/GLIStorageDevice.py:
98     support for partition name
99 agaffney 1411
100 wolf31o2 1475 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
101 codeman 1410 touchups to add_profile in GLIMD to link to webgli
102     add a save to GLIMD profile button in webgli's saveprofile
103 codeman 1413 gliserv.py:
104     initial attempt at custom networking info per client. hostname support only.
105 codeman 1410
106 wolf31o2 1475 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
107 agaffney 1406 src/net/server/html/webgli/partitioning[234].pyhtml:
108     small fixes for new partioning code
109    
110 agaffney 1405 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
111     src/GLIClientController.py:
112     record PID of secondary thread
113    
114 agaffney 1401 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
115     src/GLIGenDialog.py:
116     small fix for new partitioning code
117    
118 agaffney 1388 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
119     src/GLIStorageDevice.py:
120     add get_devnode()
121     fix up detect_devices() to detect cciss/ida arrays
122     src/templates/x86ArchitectureTemplate.py:
123     use get_devnode() instead of figuring out the devnode
124 agaffney 1395 skip first 3 steps if partition layout hasn't changed
125 agaffney 1398 wipe disk and create new disklabel before recreating partitions
126 agaffney 1391 src/GLIArchitectureTemplate.py:
127     use get_devnode() in local mount and fstab stuff
128 agaffney 1388
129 agaffney 1386 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
130     src/GLIStorageDevice.py:
131     change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
132    
133 agaffney 1382 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
134     src/templates/x86ArchitectureTemplate.py:
135     continue breakup/cleanup of partitioning code
136    
137 agaffney 1380 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
138     src/GLIStorageDevice.py:
139     set disklabel to default for arch when clearing the partition table
140     src/templates/x86ArchitectureTemplate.py:
141     complete rewrite of first and second passes
142    
143 agaffney 1379 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
144     src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
145     allow iterating over Device object to get partitions
146    
147 agaffney 1371 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
148     src/GLIStorageDevice.py:
149     allow access to Device object like a dict
150    
151 agaffney 1370 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
152     src/GLIStorageDevice.py:
153     allow access to Partition object like a dict
154    
155 agaffney 1369 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
156     src/templates/x86ArchitectureTemplate.py:
157     fail if any filesystems are mounted on the device being partitioned
158    
159 agaffney 1367 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
160     src/GLIStorageDevice.py:
161     reorder minor numbers when loading partitions from disk to match the physical
162     partition order
163    
164 agaffney 1365 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
165     src/GLIStorageDevice.py:
166     overhaul for supporting mac disklabels and partitions out of disk order
167 agaffney 1366 remove free space from inside extended partition when extended is removed
168 agaffney 1365
169 wolf31o2 1362 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
170     +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
171     +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
172     +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
173     Added bash scripts, icons, and desktop entries from the ebuild to make my
174     life easier.
175 codeman 773
176 agaffney 1360 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
177     src/GLIStorageDevice.py:
178     raise an exception if the existing partitions are out of disk order
179 agaffney 1361 look for minors out of order instead of disk position
180 agaffney 1360
181 wolf31o2 1475 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
182 codeman 1356 src/fe/dialog/gli-dialog and src/GLIGenDialog:
183     added networkless mode to gli-dialog.
184    
185 wolf31o2 1475 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
186 codeman 1351 src/templates/x86AT:
187     add windows detection code for grub. untested.
188    
189     6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
190 agaffney 1345 src/templates/x86ArchitectureTemplate.py:
191     bootloader and partitioning external commands log to compile_output.log
192 agaffney 1348 wait for device node to exist before resizing
193     add -v to ntfsresize command
194     src/GLIStorageDevice.py:
195     return start/end with ip structure
196     pad min ntfs size by 50 MB just to be safe
197 agaffney 1350 src/GLIArchitectureTemplate.py:
198     only install filesystem tools for partitions with a mountpoint
199 agaffney 1345
200 wolf31o2 1475 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
201 codeman 1344 add error catching and text to saving profile dialogs
202    
203 agaffney 1339 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
204     src/GLIPortage.py:
205     create /tmp, /var/tmp, and /var/lib/portage with proper permissions
206 agaffney 1340 src/templates/x86ArchitectureTemplate.py:
207     fix checks for changed partitions so they will actually get deleted
208 agaffney 1339
209 agaffney 1331 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
210     src/GLIClientController.py:
211     slightly better error handling for pre-install failures
212    
213 agaffney 1329 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
214     src/templates/x86ArchitectureTemplate.py:
215     proper return code checking for ext2/3 resizing
216    
217 agaffney 1317 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
218     src/GLIClientController.py:
219     accept 'none' as well as 'null' for network type
220 agaffney 1320 src/GLIArchitectureTemplate.py:
221     ignore extended partitions in mount_local_partitions()
222 agaffney 1321 src/templates/x86ArchitectureTemplate.py:
223     use get_ordered_partition_list() instead of keys().sort() for new_part_list
224     check to make sure start sector for primary isn't less than end sector for
225     previous extended
226 agaffney 1322 src/GLIClientController.py:
227     write dns servers to /etc/resolv.conf
228 agaffney 1317
229 wolf31o2 1475 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
230 agaffney 1314 src/GLIPortage.py:
231     copy_pkg_to_chroot() uses compile_output.log for command output
232    
233 wolf31o2 1475 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
234 agaffney 1313 only keep a 1000 line 'scrollback' buffer for the compile output and log file
235 agaffney 791
236 wolf31o2 1475 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
237 agaffney 1306 src/GLIPortage.py:
238     add code make GLIPortage.py capable of being run stand-along for dynamic
239     stage3 generation and copying packages in a GRP-ish way
240 agaffney 1311 grp code fixups
241 agaffney 1306
242 wolf31o2 1475 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
243 agaffney 1305 src/GLIPortage.py:
244     ignore blank packages passed to get_deps() and emerge()
245    
246 wolf31o2 1475 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
247 agaffney 1304 src/GLIUtility.py:
248     add get_chosts() function
249    
250 agaffney 1306 *GLI-0.3 (12 Feb 2006)
251    
252 wolf31o2 1475 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
253 agaffney 1302 src/templates/x86ArchitectureTemplate.py:
254     pull old start/end sector values from somewhere that actually has them
255     add logic for extended partition to code that makes sure new end sector
256     doesn't overlap start sector of next partitions
257 agaffney 1303 don't freak out if partition can't be deleted
258 agaffney 1302
259 wolf31o2 1475 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
260 agaffney 1297 src/GLIPortage.py:
261     run env-update at the end of copy_pkg_to_chroot()
262    
263 wolf31o2 1475 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
264 agaffney 1295 src/templates/x86ArchitectureTemplate.py:
265     I'm a complete fscking dumbass. I recorded the end sector for partitions that
266     weren't being touched, but I never used it when recreating them...the end was
267     calculated from the size in MB instead :/
268    
269 wolf31o2 1475 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
270 agaffney 1288 src/GLIArchitectureTemplate.py:
271     pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
272 agaffney 1294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
273 agaffney 1291 src/GLIPortage.py:
274     use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
275     src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
276     'resized' flag
277 agaffney 1288
278 wolf31o2 1475 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
279 agaffney 1285 src/GLIPortage.py:
280     short circuit and check vdb directly if package begins with '='
281    
282 wolf31o2 1475 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
283 codeman 1284 added more packages to extra_packages list in IP
284    
285 wolf31o2 1475 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
286 agaffney 1277 src/templates/x86ArchitectureTemplate.py:
287     10 tries to create filesystem instead of 3
288 agaffney 1280 src/GLIPortage, src/GLIArchitectureTemplate.py:
289     ignore_missing flag for copy_pkg_to_chroot()
290 agaffney 1277
291 wolf31o2 1475 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
292 agaffney 1269 src/GLIPortage.py:
293     copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
294    
295 wolf31o2 1475 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 agaffney 1264 src/net/server/gliserv.py:
297     fix handling of 404 for real files
298     src/net/server/GLIServerProfile.py:
299     look for 'hostname' in attributes instead of 'name'
300    
301 wolf31o2 1475 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
302 agaffney 1257 src/SimpleXMLParser.py:
303     initial support for 'include' in XML files
304 agaffney 1258 src/GLIStorageDevice.py:
305     initial support for %
306 agaffney 1259 src/GLIClientController.py:
307     add debugging statements to pre-install steps
308 agaffney 1257
309 wolf31o2 1475 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
310 codeman 1253 webgli/configfiles:
311     check for key in etc_files['rc.conf'] to fix key error
312     webgli/timezone: small fix.
313 codeman 1254 webgli/extrapackages: list-type fix
314     webgli/services: same
315     glimd: add/edit_client updates.
316 codeman 1253
317 wolf31o2 1475 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
318 codeman 1248 added configure.pyhtml to glimd. minor changes
319     to top and add_client. fixed up showargs.
320 codeman 1250 added execute.pyhtml
321     changed register clients line in gliserv for name->hostname.
322     updated TODO.
323 codeman 1248
324 wolf31o2 1475 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
325 codeman 1246 src/net/server/*:
326     added add/del/edit client/profile.pythml for glimd.
327     updated templates, showclients, and gliserv.
328    
329 wolf31o2 1475 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
330 agaffney 1245 src/net/server/*:
331     stupid threading module...
332    
333 wolf31o2 1475 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
334 codeman 1241 AT: rc.conf -> conf.d/clock
335    
336 wolf31o2 1475 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
337 agaffney 1223 src/GLIPortage.py:
338     show 'Calculating dependencies for ...' in subprogress bar at beginning of
339     emerge()
340     src/GLIArchitectureTemplate.py:
341     copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
342     in the chroot
343 agaffney 1228 remove _quickpkg_deps() and _portage_best_{visible,version}()
344 agaffney 1225 src/GLIUtility.py:
345     fail immediately in validate_uri() if provided URI can't be parsed
346 agaffney 1233 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
347 agaffney 1239 debug code in spawn()
348     use lower-level os.read() instead of file.read() because python sucks
349 agaffney 1227 src/templates/x86ArchitectureTemplate.py:
350     basic subprogress reporting for partitioning
351 agaffney 1231 total_steps was 1 too high
352 agaffney 1223
353 wolf31o2 1475 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
354 agaffney 1221 src/GLIUtility.py:
355     move parse_vdb_contents() to GLIPortage
356     src/GLIPortage.py:
357     remove all symlink fixups
358 agaffney 1222 ignore 'dir' entries in CONTENTS
359     call tar with -p
360 agaffney 1221
361 wolf31o2 1475 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
362 codeman 1220 AT: bootsplash is now gensplash
363     gliserv: add advanced_mode to shared_info
364     webgli: Added advanced mode. mostly just disables a few screens.
365    
366 wolf31o2 1475 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
367 agaffney 1205 src/GLIPortage.py:
368     get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
369     added emerge()
370 agaffney 1208 update sub-progress after each package is emerged
371     skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
372 agaffney 1211 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
373 agaffney 1216 remove link if it exists before moving content into place
374 agaffney 1205 src/GLIArchitectureTemplate.py:
375     install_packages() now calls emerge() in GLIPortage
376 agaffney 1208 change all calls to self._emerge() to self._portage.emerge()
377     comment out all emerge status checking...using exceptions now
378 agaffney 1214 call copy_pkg_to_chroot() directly for livecd-kernel
379 agaffney 1205
380 wolf31o2 1475 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
381 agaffney 1198 src/GLIArchitectureTemplate.py:
382     remove add_pkg_to_world() and copy_pkg_to_chroot()
383 agaffney 1201 copy installer.log to installer.log.failed on install failure
384 agaffney 1202 src/GLIUtility.py:
385     added get_keymaps()
386     spawn() takes any False argument for chroot instead of just None
387 agaffney 1198 src/GLIPortage.py:
388     copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
389 agaffney 1202 change copy_pkg_to_chroot() to work properly with use_root=False
390 agaffney 1204 figure PORTAGE_TMPDIR properly
391 agaffney 1198
392 wolf31o2 1475 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
393 agaffney 1197 src/net/server/html/*:
394     converted showclients, load/saveprofile
395    
396 wolf31o2 1475 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
397 agaffney 1194 src/GLIPortage.py:
398     exclude packages already in chroot vdb from binary deplist
399 agaffney 1195 chroot to use best_version for chroot's vdb
400 agaffney 1196 src/runtimedeps.py:
401     accept ROOT via commandline instead of env
402 agaffney 1194
403 wolf31o2 1475 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
404 agaffney 1189 src/runtimedeps.py:
405 agaffney 1191 remove passing of ROOT
406 agaffney 1184 src/GLIPortage.py:
407 agaffney 1189 modify get_deps() to get deptree for each package and merge into final list
408 agaffney 1190 remove depgraph class
409     add debugging code to get_deps()
410 agaffney 1189 src/GLIArchitectureTemplate.py:
411     combine code for GRP/compile in install_packages() into one block
412 agaffney 1190 debugging code in install_packages()
413 agaffney 1184
414 wolf31o2 1475 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
415 agaffney 1194 src/runtimedeps.py:
416     initial commit
417     src/GLIPortage.py:
418     use separate script for GRP deps
419     remove calls to portage module
420    
421 wolf31o2 1475 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
422 agaffney 1181 src/GLIPortage.py:
423     initial commit
424 agaffney 1182 move some of portage function from GLIAT
425 agaffney 1183 flipped around a few function args
426 agaffney 1182 src/GLIArchitectureTemplate.py:
427     revamp install_packages() for new GLIPortage
428 agaffney 1181
429 wolf31o2 1475 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
430 agaffney 1180 src/GLIArchitectureTemplate.py:
431     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
432    
433 wolf31o2 1475 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
434 agaffney 1176 src/net/server/gliserv.py:
435     wrap generated code in a class to isolate it a bit better
436     302 redirects work
437 agaffney 1179 don't use cgi.escape() for <% %>
438 agaffney 1177 src/net/server/html/webgli/*:
439     load/save profile
440 agaffney 1178 src/GLIUtility.py:
441     change /sbin/lspci to just lspci
442 agaffney 1176
443 wolf31o2 1475 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 agaffney 1172 src/GLIClientController.py:
445     change ordering of statements in CC run() while loop to not go past the end
446     of the array
447 agaffney 1173 src/GLIArchitectureTemplate.py:
448     removed redundant bind mounts
449 agaffney 1172
450 wolf31o2 1475 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
451 codeman 1170 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
452 codeman 1171 added a diagram by blackace from last night.
453     added the glossary in RTF format.
454 codeman 1170
455 wolf31o2 1475 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
456 codeman 1166 x86AT: separated out emerge/configure from running of bootloader
457     added MBR drive support to lilo.
458     these changes will likely not work.
459     AT: added setup_and_run_bootloader step.
460    
461 wolf31o2 1475 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 agaffney 1163 src/net/server/gliserv.py:
463     call generated code in a function
464     src/net/server/html/webgli/*:
465     include top/bottom
466 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
467     src/GLIClientCongifuration.py:
468     install mode magic
469 agaffney 1163
470 wolf31o2 1475 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
471 agaffney 1156 src/GLIClientController.py:
472     use GLIException when there's an import problem
473 agaffney 1159 added debug code to show install_steps
474 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
475     add . to import path
476 agaffney 1160 proper path this time: ../../templates
477 agaffney 1162 src/GLIArchitectureTemplate.py:
478     add _portage_best_version() function
479 agaffney 1156
480 wolf31o2 1475 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
481 codeman 1154 added initial glossary and gimli diagram to the docs directory.
482 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
483 codeman 1154
484 wolf31o2 1475 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
485 agaffney 1149 src/net/server/html/webgli/:
486     converted globaluse, localuse, networkmounts, portagetree, and stageselection
487 agaffney 1150 moved saveclientconfig stuff into clientconfig
488 agaffney 1151 moved saveconfigfiles into config files
489     converted etc_portage and makedotconf
490 agaffney 1152 converted bootloader and kernel
491 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
492 agaffney 1151 src/net/server/gliserv.py:
493     proper 404 handling for .pyhtml extension
494     HTML escape <% %> stuff
495 agaffney 1152 work around python's sucky regexes
496 agaffney 1153 src/GLIInstallProfile.py:
497     allow set_{rsync,ftp,http}_proxy() to accept empty values
498 agaffney 1149
499 wolf31o2 1475 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
500 agaffney 1147 src/net/server/gliserv.py:
501 agaffney 1148 initial commit of Legolas templating engine
502     302 redirects
503 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
504     minor changes for new code
505     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
506     initial commit of the conversion from the monolithic WebGLIHandler.py to the
507 agaffney 1148 one file per path Legolas goodness
508     partitioning[2-4] done
509 agaffney 1147
510 wolf31o2 1475 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
511 codeman 1145 webgli: dhcp options in CC and post-install.
512     updated comparison chart.
513 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
514 codeman 1145
515 wolf31o2 1475 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
516 agaffney 1138 webgli_template.html: valign=top on left side.
517     webgli: fix bootloader boot_device. now working.
518 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
519 agaffney 1138
520 wolf31o2 1475 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
521 agaffney 1132 src/net/server/webgli_template.html:
522     increase padding for content cell to 7px and add colspan=2
523    
524 wolf31o2 1475 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
525 blackace 1131 webgli: added graphic bar on top
526     webgli: added hover effects on the links on the left
527     webgli: re-rendered header_bg.png to stretch without artifacts
528    
529 wolf31o2 1475 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
530 codeman 1128 webgli: make.conf disabling fixes for dynamic_stage3
531     fixed portage snapshot browse popup
532     all changes tested.
533     webgli: add debug mode to CC screen. the screen still needs lots of work.
534    
535 wolf31o2 1475 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
536 codeman 1122 added debug mode question to gli-dialog
537     added CC proxies to CC networking for gli-dialog
538 codeman 1125 webgli: fixed skip CC networking if connection active
539     webgli: portage snapshot defaults to CD
540     webgli: bootloader mbr drive selection
541     webgli: USE flags unselectable if dynamic_stage3
542     webgli: manual extra packages and save button.
543    
544 wolf31o2 1475 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
545 agaffney 1119 src/GLIUtility.py:
546     change ping count to 2
547 agaffney 1121 docs/comparison.html
548     initial commit
549 agaffney 1119
550 wolf31o2 1475 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
551 agaffney 1113 src/templates/x86ArchitectureTemplate.py:
552     fix map() issue with grub code
553     replace kernel_names and initrd_names loops with one-liners
554    
555 wolf31o2 1475 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
556 codeman 1102 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
557 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
558 codeman 1106 failure cleanup now an option for gli-dialog.
559 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
560     added comparison list and updated TODO!
561 codeman 1102
562 wolf31o2 1475 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
563 agaffney 1097 src/GLIArchitectureTemplate.py:
564     fix to stage1() debug code
565 agaffney 1098 fix to stage2() debug code
566 agaffney 1097
567 wolf31o2 1475 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
568 codeman 1096 some more bootloader code fixes. forgot boot_device != mbr_device.
569 agaffney 1097
570 wolf31o2 1475 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
571 agaffney 1097 src/GLIStorageDevice.py:
572     fix to unallocated space merging when last one is after part 4
573 codeman 1096
574 wolf31o2 1475 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
575 agaffney 1088 src/GLIArchitectureTemplate.py:
576     small fix to debugging code in copy_pkg_to_chroot()
577    
578 wolf31o2 1475 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
579 codeman 1096 more bugfixes with bootloader code
580     gli-dialog side appears to work
581 codeman 1086
582 wolf31o2 1475 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
583 codeman 1080 initial adding of boot_device to backend.
584     initial boot_device support added to gli-dialog.
585 codeman 1096 some fixes of my poor coding
586 codeman 1077
587 wolf31o2 1475 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
588 codeman 1075 converted gli-dialog to use the install_package_list.
589     gtkfe has already been converted by AllanonJL
590 codeman 1076 new way working in gli-dialog now and added to webgli.
591 codeman 1077 added set/get_boot_device() to IP
592 codeman 1075
593 wolf31o2 1475 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
594 codeman 1073 get_install_package_list added to InstallProfile. This can be used by the FEs
595    
596 wolf31o2 1475 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
597 agaffney 1070 src/templates/x86ArchitectureTemplate.py:
598     call ls with '-1 --color=no'
599    
600 wolf31o2 1475 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
601 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
602 codeman 1069
603 wolf31o2 1475 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
604 agaffney 1068 src/GLIArchitectureTemplate.py:
605     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
606     confused
607    
608 wolf31o2 1475 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
609 codeman 1066 removed protocols from rc.conf screens
610     finished initial rc.conf and make.conf in webgli
611    
612 wolf31o2 1475 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
613 agaffney 1062 src/net/server/gliserv.py:
614     add -h option to usage()
615 agaffney 1063 show time and request URI in debug mode
616 agaffney 1064 show client IP in debug mode
617 agaffney 1065 just use IP instead of trying to do a reverse lookup
618 agaffney 1062
619 wolf31o2 1475 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
620 agaffney 1060 src/net/server/gliserv.py:
621     'classier' 401 message
622     proper commandline parsing
623     help via -h
624     user/pass can be specificed via commandline option
625    
626 wolf31o2 1475 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
627 agaffney 1057 src/net/server/gliserv.py:
628 agaffney 1059 basic HTTP auth
629    
630 wolf31o2 1475 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
631 agaffney 1059 src/net/server/gliserv.py:
632 agaffney 1057 dynamic module reloading (yipee!)
633 agaffney 1058 send 'Last-Modified' header for real files
634     respond to HEAD with just headers
635 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
636     icons for drives
637    
638 wolf31o2 1475 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
639 agaffney 1042 src/net/server/handlers/WebGLIHandler.py:
640     initial 'pretty' partition table display support
641 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
642 agaffney 1044 radio buttons and pretty display work together
643     META redirect instead of javascript
644     pretty display stretches across entire screen
645 agaffney 1046 'Recommended layout' and 'Clear drive' functions
646 agaffney 1047 properly catch exceptions from do_recommended()
647 agaffney 1049 src/GLIArchitectureTemplate.py:
648     replace preinst, copy, postinst, rm steps with qmerge
649 agaffney 1050 whoops...that shouldn't have been commented out
650 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
651 agaffney 1052 more generic of symlink crappiness
652 agaffney 1053 new copy_pkg_to_chroot() actually works now
653 agaffney 1042
654 wolf31o2 1475 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
655 agaffney 1037 src/GLIStorageDevice.py:
656     initial generic disk support
657 agaffney 1040 fixes for add_partition() code
658 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
659     added support for creating generic disks
660 agaffney 1040 add new partition working
661 agaffney 1041 save and delete partitions
662 agaffney 1037
663 wolf31o2 1475 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
664 codeman 1034 webgli: Partitioning making progress.
665    
666 wolf31o2 1475 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
667 agaffney 1032 src/GLIArchitectureTemplate.py:
668     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
669     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
670     dir) and works around /etc/gconf symlink problem
671    
672 wolf31o2 1475 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
673 codeman 1031 webgli: lots of updates. preliminary partitioning. extra packages works.
674    
675 wolf31o2 1475 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
676 agaffney 1029 src/net/server/gliserv.py:
677     httpd now supports HTTPS and falls back to HTTP if not available
678 agaffney 1030 make fallback actually work
679 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
680     SecureSocketServer is now threaded
681    
682 wolf31o2 1475 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
683 agaffney 1026 src/net/client/gliclient.py:
684     try to use HTTPS for XMLRPC first and fallback to HTTP
685 agaffney 1028 pretend mode
686 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
687     HTTPS XMLRPC goodness from samyron
688 agaffney 1028 pass name of certificate
689 agaffney 1026
690 wolf31o2 1475 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
691 codeman 1025 wegli: daemons and services screens done.
692    
693 wolf31o2 1475 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
694 codeman 1021 webgli: networking and users screens
695     added return_redirect to handler.py
696 codeman 1022 loading and saving install/client profiles works for webgli now
697     Review also done
698 agaffney 1033
699     *GLI-0.2 (27 Oct 2005)
700 codeman 1025
701 wolf31o2 1475 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 agaffney 1009 src/templates/x86ArchitectureTemplate.py:
703     properly check for bootloader emerge exist status with exitsuccess()
704 agaffney 1010 log output of grub install command
705 agaffney 1011 add --batch --no-floppy to grub command
706 agaffney 1013 grubinstallstring only gets logged if debug is on
707 agaffney 1012 src/GLIUtility.py:
708     update progress bar to 100% when process finishes
709 agaffney 1009
710 wolf31o2 1475 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
711 agaffney 1002 src/GLIClientController.py:
712     added debugging code for the interaction between the 2 threads via Event()
713 agaffney 1003 src/GLIUtility.py:
714     doubled the buffer size in spawn()
715 agaffney 1004 bump buffer size up to 16384
716     only report progress in 5% increments
717 agaffney 1005 src/GLIArchitectureTemplate.py:
718     kernelpkgs.txt support code
719 agaffney 1006 above disabled because it sucks
720 agaffney 1007 added add_pkg_to_world()
721 agaffney 1002
722 wolf31o2 1475 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
723 agaffney 1001 src/GLIArchitectureTemplate.py:
724     use tar | tar to copy files in copy_pkg_to_chroot()
725     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
726    
727 wolf31o2 1475 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
728 codeman 995 DEBUGGING ADDED TO AT. verbose field added to CConfig.
729    
730 wolf31o2 1475 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
731 agaffney 993 src/net/server/gliserv.py:
732     / maps to index.html
733     look for actual files in html/
734     src/net/html:
735     new template
736 agaffney 998 src/GLIUtility.py:
737     added parse_vdb_contents()
738     src/GLIArchitectureTemplate.py:
739     added copy_pkg_to_chroot()
740     added debug code to dynamic-stage3
741 agaffney 999 switch dynamic-stage3 to new method
742     lots of bug fixes from adding debug code
743 agaffney 993
744 wolf31o2 1475 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
745 codeman 983 webgli initial bootloader support + changed make.conf.
746 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
747 codeman 983
748 wolf31o2 1475 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
749 agaffney 982 src/GLIUtility.py:
750 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
751 agaffney 981 add unpack progress to portage snapshot
752 agaffney 982 use read() instead of readlines() in spawn()
753     only update progress bar for whole percents
754 agaffney 980
755 wolf31o2 1475 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
756 agaffney 976 src/templates/x86ArchitectureTemplate.py:
757     change call to 'grub' to use GLIUtility.exitsuccess()
758 agaffney 977 add definition of 'build_mode' in _configure_lilo()
759 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
760     fix so subshell is called in root shell
761    
762 wolf31o2 1475 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
763 agaffney 975 src/net/server/handlers/WebGLIHandler.py:
764     stage screen launches URI browser in sized window with various properties set
765    
766 wolf31o2 1475 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
767 agaffney 971 src/misc/updategtkfe:
768     updated to actually work
769 agaffney 972 remove previous snapshot and extracted dir before downloading
770 agaffney 973 src/misc/updateglid:
771     updated to actually work
772 agaffney 974 src/templates/x86ArchitectureTemplate.py:
773     fixed bug where grub code was looking for 'root+root+file_name2'
774 agaffney 971
775 wolf31o2 1475 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
776 agaffney 968 src/net/server/handlers/WebGLIHandler.py:
777     URI browser
778 agaffney 970 added mirror selection
779 agaffney 969 src/GLIUtility.py:
780     ls via ssh strips off ending *
781 agaffney 968
782 wolf31o2 1475 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
783 codeman 965 more updates to webgli. stage selection.
784    
785 wolf31o2 1475 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
786 codeman 961 updated webgli with preliminary Network Mounts support.
787    
788 wolf31o2 1475 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
789 codeman 952 GenDialog: string formatting and yes/no label fixes.
790     added WebGLI template for gliserv.py
791     added WebGLIHandler as well as a definition for it in gliserv.py
792     updates to the webgli files even though they won't be there for long.
793 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
794     goes public.
795 codeman 952
796 wolf31o2 1475 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
797 agaffney 955 src/net/server/gliserv.py:
798     override dict to not be so anal
799 agaffney 949 main server now loads separate module to handle requests
800 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
801 agaffney 949 split out profile URLs into separate handler function
802 agaffney 950 move handlers into subdirectory
803 agaffney 956 add Welcome and Clients handlers
804 agaffney 949
805 wolf31o2 1475 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
806 agaffney 944 src/GLIUtility.py:
807     raise exception if password prompt received twice
808    
809 wolf31o2 1475 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
810 agaffney 944 src/GLIUtility.py:
811 agaffney 943 removed rot13ify()
812    
813 wolf31o2 1475 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
814 agaffney 935 src/net/server/gliserv.py:
815     allow for param to be passed multiple times in GET
816 agaffney 940 no XMLRPC functions return None
817 agaffney 941 modify POST request parsing to only create a list if needed
818 agaffney 942 fix GET request parsing so the list creation for multiple values works
819 agaffney 940 src/net/client/gliclient.py:
820     various typo and type mismatch fixes
821     exit after exception
822 agaffney 935
823 wolf31o2 1475 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
824 agaffney 933 src/net/client/gliclient.py:
825     initial commit
826 agaffney 934 pass MAC to XMLRPC functions
827     src/net/server/GLIServerProfile.py:
828     rename GLIClientsProfiles to GLIServerProfile
829 agaffney 933
830 wolf31o2 1475 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
831 agaffney 930 src/net/server/gliserv.py:
832     now handles POST requests
833     move majority of request handling code to common_handler() to reduce code
834     duplication
835 agaffney 931 profile loading
836     client reg via XMLRPC goes into SharedInfo()
837     /showclients redesign
838     template fixes
839 agaffney 932 allow handler functions to add/change headers
840     save profile
841 agaffney 930
842 wolf31o2 1475 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
843 agaffney 929 src/net/server/GLIClientsProfiles.py:
844     initial commit
845     src/net/server/template.html:
846     initial commit
847     src/net/server/gliserv.py:
848     add template mojo
849    
850 wolf31o2 1475 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
851 agaffney 928 src/net/server/gliserv.py:
852     XMLRPC mojo
853    
854 wolf31o2 1475 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
855 agaffney 919 src/GLIArchitectureTemplate.py:
856     add code in _edit_config() to comment line where variable is defined
857     previously
858 agaffney 920 insert new line under previous definition of variable if it exists
859 agaffney 921 small _edit_config() cleanup
860 agaffney 923 src/GLIStorageDevice.py:
861     add clear_partitions() function
862 agaffney 924 new sizes for recommended partition layout
863 agaffney 925 automatically calculate swap size for recommended layout
864 agaffney 919
865 wolf31o2 1475 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
866 agaffney 918 src/templates/x86ArchitectureTemplate.py:
867     fat16 mojo
868    
869 wolf31o2 1475 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
870 agaffney 914 src/GLIStorageDevice.py:
871     prevent do_recommended() from being run twice
872 agaffney 916 rewrite do_recommended() to be more robust
873 agaffney 917 src/GLIArchitectureTemplate.py:
874     rework _edit_config() to not write duplicate entries
875 agaffney 914
876 wolf31o2 1475 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
877 agaffney 912 src/GLIStorageDevice.py:
878     added do_recommended() function to automatically created 256M/1G/* layout
879    
880 wolf31o2 1475 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
881 codeman 907 src/gli-dialog.py: added set_distcc to the list
882     GenDialog: added set_distcc. untested.
883     IP: added install_distcc flag.
884     AT: added install_distcc function based on the flag. runs after build_kernel
885 codeman 911 changed AT spawn command for distcc for nodeps.
886 codeman 907
887 wolf31o2 1475 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 agaffney 906 src/GLIUtility.py:
889     add rot13ify() function
890    
891 wolf31o2 1475 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
892     src/GenDialog.py:
893 codeman 905 added a sentence of text. unchecking support added.
894 codeman 904
895 wolf31o2 1475 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
896     src/GLIUtility.py:
897 codeman 901 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
898 wolf31o2 1475 src/GenDialog.py:
899 codeman 902 still working on extra_packages. transformed the list to new format.
900     added GRP indication to list. untested.
901 codeman 901 TODO lists updated.
902 wolf31o2 1475 src/fe/dialog/gli-dialog.py:
903 codeman 901 spelling mistook.
904    
905 wolf31o2 1475 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 agaffney 900 src/GLIUtility.py:
907     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
908    
909 wolf31o2 1475 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
910 agaffney 889 src/GLIUtility.py:
911     add get_directory_listing_from_uri()
912     add http support to above
913 agaffney 892 add ftp support to above
914 agaffney 893 add scp support to above
915 agaffney 891 src/GLIArchitectureTemplate.py:
916     "0" instead of 0 for key of single-element dict passed to _edit_config()
917 agaffney 889
918 wolf31o2 1475 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
919 codeman 887 value_only -> only_value
920    
921 wolf31o2 1475 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
922 codeman 881 gutted out all of etc_portage structure since it is now all handled by
923     etc_files
924    
925 wolf31o2 1475 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
926 agaffney 874 src/GLIArchitectureTemplate.py:
927     install_packages() sends progress update notifications
928 agaffney 876 src/templates/x86ArchitectureTemplate.py:
929     increase sleep to 5s between format tries
930 agaffney 882 src/GLIClientController.py:
931     pass 'self' to AT instead of 'self._pretend'
932 agaffney 874
933 wolf31o2 1475 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
934 codeman 873 logger -> logger.log in x86AT
935    
936 wolf31o2 1475 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
937 codeman 870 added set_etc_portage to IP. debugging gli-d's support for it.
938    
939 wolf31o2 1475 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 agaffney 869 src/templates/x86ArchitectureTemplate.py:
941     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
942    
943 wolf31o2 1475 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 agaffney 857 src/GLIArchitectureTemplate.py:
945     add _portage_best_version() function and rework install_packages() to allow
946     for future X of Y tracking
947 agaffney 860 Use best_visible instead of best_version
948 agaffney 862 tracked down and fixed missing = causing empty install extra packages
949 agaffney 864 use = when emerging also
950 agaffney 865 quickpkg hokey pokey
951 agaffney 867 run _get_packages_to_emerge() again with -pk
952 agaffney 857
953 wolf31o2 1475 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
954     src/ArchTemplate:
955     removed install_xorg_x11, and put the xorg.conf copying at
956     the end of install_packages.
957 codeman 850 added updateglid to /src/misc
958 codeman 851 updated all core files with new GPL notice and copyright statement.
959 codeman 848
960 wolf31o2 1475 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
961 agaffney 839 src/GLIUtility.py:
962     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
963     a snapshot in /mnt/cdrom/snapshots/
964 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
965 agaffney 846 change calls to extra package special case functions to 'self.blah'
966 agaffney 839
967 wolf31o2 1475 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
968 codeman 830 src/ArchTemplate: changed "voodoo".
969 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
970     normal emerge sync fails.
971 codeman 836 removed get_sources_from_cd because it is obsolete.
972     add special cases to install_packages. remove fatal exception on package
973     install failure b/c the box will still be bootable.
974 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
975     handled in the FEs.
976 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
977     awaiting testing.
978 codeman 830
979 wolf31o2 1475 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
980 agaffney 826 src/GLIStorageDevice.py:
981     global try/except block around fs resizable detection code
982 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
983     install-failed cleanup function
984 agaffney 826
985 wolf31o2 1475 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
986 codeman 825 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
987    
988 wolf31o2 1475 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
989 codeman 814 GLIGenDialog:
990     add drive choices for loaded configs.
991     force snapshot for dynamic_stage3
992     init the snapshoturi input to the cd snapshot if not already selected.
993     if dynamic_stage3, skip the make.conf step.
994     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
995     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
996 codeman 812
997 wolf31o2 1475 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
998 agaffney 811 src/GLIArchitectureTemplate.py:
999     manually call MAKEDEV in stage3-dynamic code
1000 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
1001 agaffney 815 src/GLIUtility.py:
1002     add beginning of validate_uri() function
1003 agaffney 817 add file:/// support to validate_uri()
1004 agaffney 822 single quotes when setting livecd password
1005 agaffney 811
1006 wolf31o2 1475 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1007 agaffney 807 src/GLIGenDialog.py:
1008     change getmountpoint() to get_mountpoint()
1009 agaffney 808 src/misc/updategtkfe:
1010     committed script to automatically download latest snapshot and run gtkfe
1011 agaffney 809 src/templates/x86ArchitectureTemplate.py:
1012     fix _configure_lilo_add_windows() for IP -> GLISD stuff
1013 agaffney 810 src/GLIArchitectureTemplate.py:
1014     give tmp_minor an initial value in mount_local_partitions so that the value
1015     remain from the previous drive
1016 agaffney 807
1017 wolf31o2 1475 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1018 agaffney 805 src/templates/x86ArchitectureTemplate.py:
1019     Fix _configure_lilo() for IP using GLISD stuff
1020 agaffney 806 src/GLIArchitectureTemplate.py:
1021     install_cron_daemon() treats "none" specially
1022 agaffney 805
1023 wolf31o2 1475 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1024 codeman 801 old patch from Steven Mertens to resolve bug #96642
1025 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
1026     strings renamed for global use if necessary.
1027 codeman 803 fix all three parts of bug 102291
1028 codeman 804 disable set_etc_portage until fully-written.
1029 codeman 801
1030 wolf31o2 1475 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1031 agaffney 799 src/GLIClientController.py:
1032     lower-case http/ftp proxy envvars
1033    
1034 wolf31o2 1475 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1035 agaffney 797 src/GLIClientController.py:
1036     log end of pre_install steps to aid in debugging
1037 agaffney 798 src/templates/x86ArchitectureTemplate.py:
1038     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1039 agaffney 797
1040 wolf31o2 1475 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1041     src/GLIArchitectureTemplate.py:
1042 agaffney 795 check to make sure that the device node we're wait for to exist isn't of
1043     type 'free'
1044    
1045 wolf31o2 1475 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1046 agaffney 792 src/GLIGenDialog.py:
1047     convert install_packages to list in set_extra_packages()
1048 agaffney 793 check return code of checklist() call in "Manual" section
1049 agaffney 794 *actually* fix the first problem
1050 agaffney 792
1051 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1052     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1053     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1054    
1055 wolf31o2 1475 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1056 agaffney 789 src/GLIArchitectureTemplate.py:
1057     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1058    
1059 wolf31o2 1475 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1060 agaffney 787 Add CDATA support to SimpleXMLParser and add utility functions for it.
1061    
1062 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1063     src/GLIArchitectureTemplate.py:
1064     Fix case where vixie-cron is specified as a full package atom, as we still
1065     don't want to run 'crontab /etc/crontab' for it.
1066    
1067 agaffney 788 *GLI-0.1 (3 Aug 2005)
1068    
1069 wolf31o2 1475 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1070 codeman 764 add scp to list of is_uri() so GenDialog doesn't complain.
1071 codeman 769 fixed livecd-kernel bug in bootloader code.
1072 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
1073     change bootloader to allow for both initrd and initramfs.
1074 codeman 777 fix IP for dynamic_stage3.
1075 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1076 codeman 777
1077 wolf31o2 1475 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 codeman 769 Added full scp:// URI support to get_uri() in GLIUtility
1079 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
1080     Remove print statement from scp:// code.
1081 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
1082 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
1083 agaffney 770 Check to make sure pkg can be split on / and some debugging code
1084 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1085 codeman 777 SimpleXMLParser handles True/False/None correctly now
1086 agaffney 778 Comment out above fix
1087 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1088 codeman 764
1089 wolf31o2 1475 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1090 samyron 762 Removed a FIXME in the GLIClientConfiguration that is no
1091     longer needed.
1092    
1093 wolf31o2 1475 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1094 agaffney 760 Default to x86 in ClientConfig
1095 agaffney 761 Typo in build-a-stage3 code.
1096     Remove MAKEDEV call in build-a-stage3 postscript.
1097 agaffney 760
1098 wolf31o2 1475 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1099 codeman 757 Rewrote init of IP for gli-d. Other GenDialog updates.
1100     allow network_type to be None in CConfig.
1101    
1102 wolf31o2 1475 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1103 agaffney 755 Add _dynamic_stage3 option to IP.
1104     Add check for that option to dynamic stage3 code in ArchTemplate.
1105 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
1106     Fix serialization of dns-servers in ClientConfig.
1107 agaffney 755
1108 wolf31o2 1475 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1109 codeman 754 changed default values of cron/logger in IP.
1110     moved GenDialog IP init out to the individual files. gli-dialog's version
1111     will change quite a bit.
1112    
1113 wolf31o2 1475 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1114 codeman 750 added ppcArchTemplate. blank now. working on yaboot.
1115 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
1116     skeleton implementation of _configure_yaboot.
1117     small fixes to other templates.
1118 codeman 750
1119 wolf31o2 1475 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1120 codeman 747 GenDialog updates. changed comment in IP.
1121    
1122 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1123 robbat2 743 src/GLIInstallProfile.py:
1124     Fix codeman's screwup of changing the service seperator to ',' in the parser
1125     without changing it in the serialization code! Also document this in a
1126     comment so you find it easier. Everybody needs to make sure they update
1127     their install profiles!
1128    
1129     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1130 robbat2 742 src/GLIArchitectureTemplate.py:
1131     Fix casting of list to string and concat of None with string, as well as
1132     commented prototype of checking that mounting actually worked (found a case
1133     where mount can return success, but the mount won't be done).
1134    
1135     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1136 robbat2 740 src/templates/x86ArchitectureTemplate.py:
1137 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1138     checking for the device, and sleeping 1 second each time.
1139    
1140     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1141     src/templates/x86ArchitectureTemplate.py:
1142 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1143     bootloader works again. Also rename _install_{grub,lilo} to
1144     _configure_{grub,lilo} since they don't install the loaders anymore
1145     themselves.
1146    
1147 wolf31o2 1475 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1148 codeman 738 fix global USE flags to not include the arch types at the end.
1149     updates to GenDialog and gli-d.
1150    
1151 wolf31o2 1475 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1152 codeman 734 fixing bootloader code for no initrd and initrd->initramfs naming change.
1153    
1154 wolf31o2 1475 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1155 agaffney 733 Proper comments and parameters to GLIException in install_mta()
1156 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1157 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1158     list_tarball_from_mirror() to eliminate blank last item.
1159 agaffney 733
1160 wolf31o2 1475 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1161 agaffney 731 Added stage3 generation code.
1162    
1163 wolf31o2 1475 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1164 codeman 730 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1165     Mild changes to GenDialog.
1166    
1167 wolf31o2 1475 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1168 agaffney 729 Remove separate install step configure_rc_conf() since it's handled by
1169     update_config_files()
1170     Make a copy of newvalues in _edit_config() so quotes aren't added when the
1171     function is called twice on the same file.
1172    
1173 wolf31o2 1475 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1174 agaffney 726 Missing \ in sed in _get_packages_to_emerge()
1175 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1176 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
1177     _get_packages_to_emerge()
1178 agaffney 726
1179 wolf31o2 1475 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1180 codeman 725 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1181     in the dialog.py gauge code.
1182    
1183 wolf31o2 1475 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1184 agaffney 720 Add code to update_config_files() to go through etc_files and update stuff.
1185 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1186 agaffney 724 Only use float() in partition xml parsing code if type == "free"
1187 agaffney 720
1188 wolf31o2 1475 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1189 codeman 718 finished almost all internationalization of GenDialog.
1190 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
1191 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1192 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
1193 codeman 718
1194 wolf31o2 1475 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1195 agaffney 716 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1196    
1197 wolf31o2 1475 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1198 codeman 715 fix extra entry in list_mirrors()
1199     beginning internationalization runthrough.
1200    
1201 wolf31o2 1475 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1202 codeman 713 added dialog.py to /src temporarily until it gets accepted upstream.
1203 codeman 714 fix for unused value in form in dialog.py and changed heights.
1204     fix GenDialog forms.
1205 codeman 713
1206 wolf31o2 1475 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1207 codeman 710 Changed hostname/domainname for new baselayout.
1208     Changed _add_to_runlevel errors to logs.
1209     Updated TODO list to show status of GenDialog
1210     More updates to GenDialog including two checklists that probably won't work.
1211 codeman 711 update IP to use comma-separated list instead of space separated for services.
1212 codeman 710
1213 wolf31o2 1475 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1214 codeman 707 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1215     GenDialog as it gets closer to completion.
1216    
1217 wolf31o2 1475 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1218 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1219     instead of int() in add_partition_device_partition() for minor (closes 96804)
1220 agaffney 704
1221 wolf31o2 1475 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1222 agaffney 704 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1223     instead of 'interfaces[interface][1]' since DHCP uses that field for its
1224     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1225    
1226 wolf31o2 1475 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1227 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1228 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1229 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1230 agaffney 704 Fix undefined variable 'output' issue in spawn().
1231 agaffney 697
1232 wolf31o2 1475 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1233 codeman 696 More updates to GenDialog and gli-d.
1234    
1235 wolf31o2 1475 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1236 agaffney 695 Modify list_mirrors() to return a list of mirror URL/name pairs.
1237    
1238 wolf31o2 1475 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1239 codeman 694 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1240     get subarch.
1241    
1242 wolf31o2 1475 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1243 agaffney 691 Backend partitioning will create disklabel is none exists. Installprofile
1244 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
1245     mount_local_partitions() to remember device along with minor in the
1246 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1247     add else block to log unsupported netmount types to mount_network_shares()
1248 agaffney 691
1249 wolf31o2 1475 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1250 robbat2 686 src/GLIArchitectureTemplate.py:
1251 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
1252     src/fe/cli/clife.py:
1253     Logging system.
1254     src/GLIUtility.py, src/GLIStorageDevice.py:
1255     Add comments about re-writes needed for boxes without sysfs.
1256    
1257 wolf31o2 1475 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1258 robbat2 690 src/GLIArchitectureTemplate.py:
1259 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1260     'make dep' call for custom compile. build_mode support for prepare-only and
1261     none types completed. custom compile function chains shell functions in
1262     spawned script, to allow for catching all errors.
1263    
1264 wolf31o2 1475 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1265 codeman 685 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1266     and GenDialog. other gendialog updates as well. kernel updates untested.
1267    
1268 wolf31o2 1475 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1269 robbat2 680 src/GLIInstallProfile.py:
1270     Change structure of etc-portage stuff. The serialization was broken before my
1271     last commit, and I am the only person that's ever used it. The new schema is
1272     as follows:
1273     <etc-portage>
1274     <file name="package.mask"/>
1275     <file name="package.unmask">
1276     <entry atom="sys-kernel/openmosix-sources"/>
1277     </file>
1278     <file name="package.use">
1279     <entry atom="sys-libs/db">
1280     -java
1281     </entry>
1282     <entry atom="dev-libs/cyrus-sasl">
1283     -ldap
1284     </entry>
1285     </file>
1286     </etc-portage>
1287    
1288    
1289 wolf31o2 1475 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1290 robbat2 679 src/GLIInstallProfile.py:
1291     Add new entry for gli-profile/kernel-build-method item. Add missing
1292     serialize_etc_portage (temporary). Make serialize_make_conf always print the
1293     keys in the same order.
1294    
1295 wolf31o2 1475 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1296 robbat2 675 src/GLIArchitectureTemplate.py:
1297 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1298     was repeatedly appended to make.conf.
1299    
1300     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1301     src/GLIArchitectureTemplate.py:
1302 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
1303     successfully mounted swap device for using swapoff. Add proper error checking
1304     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1305     'file'. Clean up some redundant code (thanks to pychecker).'
1306    
1307 wolf31o2 1475 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1308 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
1309 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1310     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1311 agaffney 668
1312 wolf31o2 1475 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1313 allanonjl 667 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1314     in add_network_interface.
1315    
1316 wolf31o2 1475 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1317     src/GLIArchitectureTemplate.py:
1318 robbat2 664 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1319     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1320 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1321     prepare_chroot.
1322 robbat2 664
1323 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1324     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1325     +src/fe/installer-gtk:
1326     Add new automated CLI frontend. Add scripts that are the intended means to
1327     use each frontend.
1328    
1329 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1330 robbat2 663 src/GLIClientController.py:
1331     Add null type to network config, for cases where the interface is already up
1332     and should not be touched (netboot for example).
1333    
1334 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1335 robbat2 652 src/GLIArchitectureTemplate.py:
1336 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1337     string!. Try to use binary packages if available by default.
1338    
1339 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1340 robbat2 663 src/GLIArchitectureTemplate.py:
1341 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
1342     actually exists before we try to add it. set_services phase must take place
1343     after the package installation, otherwise the init scripts might not exist.
1344     Find the correct init script for the cron and logging daemons, and add that
1345     instead of the package atom.
1346    
1347 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1348 robbat2 656 src/GLIArchitectureTemplate.py:
1349 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1350     usage of 'file' to 'contents' for the variable name, as it shadows
1351     __builtin__.file.
1352    
1353 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1354 robbat2 655 src/GLIArchitectureTemplate.py:
1355 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
1356     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1357     for 'none' kernel config for build_kernel phase. Put kernel_script in
1358     /var/tmp instead of /root for build_kernel phase.
1359    
1360 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1361     Rename mta variables to match syslog/cron variables.
1362    
1363 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1364 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1365     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1366     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1367     src/templates/.cvsignore, src/tests/.cvsignore:
1368     Refactor partition formatting again to include error checking. Allow 'none'
1369     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1370    
1371 wolf31o2 1475 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1372 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1373     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1374     only have a single spawn call.
1375    
1376 wolf31o2 1475 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1377 codeman 647 refixed samyron's fix of set_architecture_template.
1378    
1379 wolf31o2 1475 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1380 agaffney 646 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1381     be executable.
1382    
1383 wolf31o2 1475 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1384 samyron 643 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1385     error checking when you call set_architecture_template.
1386    
1387 wolf31o2 1475 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1388 codeman 641 moved the mkfsopts input to the partition options menu instead of the during
1389     the creation process. updated GenDialog to say it supports reiserfs v3.
1390    
1391 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1392     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1393     Complete support for 'mkfsopts' parameter in main system and dialogfe.
1394     Add support for other partition types to dialogfe.
1395     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1396     avoid integer overflows and wraparounds.
1397    
1398 wolf31o2 1475 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1399 agaffney 631 Removed start/end from XML output and added mkfsopts to partitioning info.
1400 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1401 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1402 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
1403     partitioning. Fix free space overwriting bug. Remove a few unused functions
1404 agaffney 640 from rewrite. Fix call to get_partition_at()
1405 agaffney 631
1406 wolf31o2 1475 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1407 codeman 630 Updates to GenDialog and dialogfe.
1408    
1409 wolf31o2 1475 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1410 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1411 agaffney 627
1412 wolf31o2 1475 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1413 codeman 626 more GenDialog updates to partitioning.
1414    
1415 wolf31o2 1475 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1416 codeman 625 Indenting issue in GLISD/get_ordered_partition_list.
1417     updates to GenDialog partitioning and added default UTC for timezone in IP.
1418    
1419 wolf31o2 1475 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1420 agaffney 624 Added GLISD.get_model()
1421    
1422 wolf31o2 1475 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1423 codeman 623 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1424     More updates to GenDialog :)
1425    
1426 wolf31o2 1475 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1427 agaffney 622 Added get_interface_realname() function.
1428    
1429 wolf31o2 1475 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1430 codeman 618 Added auto-save of CConfig and copying to new /root after install.
1431     yet even more GenDialog updates.
1432    
1433 wolf31o2 1475 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1434 codeman 616 removed print statement from GLISD. more updates to GenDialog.
1435    
1436 wolf31o2 1475 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1437 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1438 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1439 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1440     places in GLIClientConfiguration.
1441 agaffney 608
1442 wolf31o2 1475 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1443 agaffney 599 Fix mount_local_partitions(), configure_fstab(), and
1444 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1445 agaffney 601 A few more fixes for templates/x86Archtemplate
1446 agaffney 599
1447 wolf31o2 1475 27 May 2005; Preston Cody <codeman@gentoo.org> :
1448 codeman 597 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1449     a work in progress.
1450    
1451 wolf31o2 1475 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1452 agaffney 596 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1453     directly. GLISD can now handle data imported from XML.
1454    
1455 wolf31o2 1475 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1456 agaffney 595 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1457     handle blank (no disklabel) disks.
1458    
1459 wolf31o2 1475 20 May 2005; Preston Cody <codeman@gentoo.org> :
1460 codeman 594 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1461     up, documented, and separated out serialization and grouped all sections.
1462    
1463 wolf31o2 1475 19 May 2005; Preston Cody <codeman@gentoo.org> :
1464 codeman 593 Reorganization of ClientConfiguration and gutting of unused functions.
1465     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1466    
1467 wolf31o2 1475 18 May 2005; Preston Cody <codeman@gentoo.org> :
1468 codeman 591 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1469    
1470 wolf31o2 1475 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1471 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1472 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1473     copies it into /mnt/gentoo/root
1474 agaffney 588
1475 wolf31o2 1475 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1476 agaffney 585 Moved URI parsing into new function parse_uri()
1477    
1478 wolf31o2 1475 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1479 agaffney 583 Added XMLParser module.
1480    
1481 wolf31o2 1475 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1482 agaffney 580 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1483 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1484 agaffney 580
1485 wolf31o2 1475 12 May 2005; Preston Cody <codeman@gentoo.org> :
1486 codeman 577 Updated finishing_cleanup for new unmounting method from agaffney.
1487    
1488 wolf31o2 1475 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1489 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1490 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1491     unicode support to is_realstring().
1492 agaffney 575
1493 wolf31o2 1475 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1495 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1496 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1497     instead of --nocolor.
1498 agaffney 571
1499 wolf31o2 1475 10 May 2005; Preston Cody <codeman@gentoo.org> :
1500 codeman 566 Added GLIGenDialog.py to make a generic class for the dialog functions that
1501 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1502     date changes. 2004->2005.
1503 codeman 566
1504 wolf31o2 1475 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1505 agaffney 564 Removed 'quiet=True' from spawn() calls
1506    
1507 wolf31o2 1475 10 May 2005; Preston Cody <codeman@gentoo.org> :
1508 codeman 563 Updated GLIUtility with patches from chotchki. Also added documentation
1509    
1510 wolf31o2 1475 9 May 2005; Preston Cody <codeman@gentoo.org> :
1511 codeman 560 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1512     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1513     from bug #89683, mostly touchups.
1514    
1515 wolf31o2 1475 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1516 agaffney 556 GLIStorageDevice cleanup patch from bug #91761
1517    
1518 wolf31o2 1475 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1519 agaffney 551 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1520 agaffney 553 _edit_config(). Error logging casts 'error' to str
1521 agaffney 551
1522 wolf31o2 1475 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1523 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1524     code to CC to handle exceptions *not* thrown by the installer itself.
1525 agaffney 548
1526 wolf31o2 1475 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1527 agaffney 544 get_max_mb_for_resize() returns -1 if not self.resizeable
1528    
1529 wolf31o2 1475 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1530 agaffney 539 More dirty rsync hacks :-/
1531    
1532 wolf31o2 1475 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1533 codeman 532 Patches from chotchki (bug #90325) to improve CC networking. untested.
1534    
1535 wolf31o2 1475 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1536 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1537 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1538 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1539 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1540 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1541     _get_packages_to_emerge()
1542 agaffney 528
1543 wolf31o2 1475 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1544 codeman 526 Added group-adding code to set_users in ArchTemplate
1545    
1546 wolf31o2 1475 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1547 agaffney 525 Added post-install script code
1548    
1549 wolf31o2 1475 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1550 agaffney 524 Fixed encapsulation issues in GLIClientController (bug #90141)
1551    
1552 wolf31o2 1475 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 agaffney 523 Update resizing code in GLIStorageDevice
1554    
1555 wolf31o2 1475 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1556 codeman 522 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1557    
1558 wolf31o2 1475 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 agaffney 521 Reverted change to ArchTemplate and added support for commented line in old
1560     code.
1561    
1562 wolf31o2 1475 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1563 agaffney 518 Changed _edit_config() to modify value in-place instead of commenting out and
1564     adding the new value to the end of the file.
1565    
1566 wolf31o2 1475 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1567 codeman 512 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1568     Also updated TODO list.
1569    
1570 wolf31o2 1475 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1571 agaffney 509 Use blackace's one-liner to add comments for all function for use with
1572     pythondoc.
1573    
1574 wolf31o2 1475 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1575 agaffney 503 Moved 'end >= device_sectors' check out of loop to check for next partition's
1576 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1577 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1578     point of logical is now adjusted along with start.
1579 agaffney 503
1580 wolf31o2 1475 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1581 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1582 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1583     key in partition information due to new partition code leaving them as float.
1584 agaffney 497
1585 wolf31o2 1475 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1586 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1587 agaffney 494
1588 wolf31o2 1475 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 agaffney 492 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1590    
1591 wolf31o2 1475 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1592 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1593    
1594 wolf31o2 1475 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1595 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1596     sed to properly strip out junk.
1597 agaffney 481
1598 wolf31o2 1475 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1599 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1600 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1601 codeman 475
1602 wolf31o2 1475 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1603 codeman 467 Fixed indent problem in GLICController
1604    
1605 wolf31o2 1475 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1606 agaffney 463 Check for disklabel type "loop" and use the device name without a minor.
1607    
1608 wolf31o2 1475 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1609 agaffney 453 Remove /tmp/compile_output.log and /var/log/install.log when install is
1610 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1611 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1612 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1613 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1614 agaffney 453
1615 wolf31o2 1475 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1617     when unpacking tarball.
1618 agaffney 451
1619 wolf31o2 1475 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1620 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1621     filesystem_tools code.
1622 codeman 443
1623 wolf31o2 1475 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1624 codeman 427 Changed the print statements to logging in the partitioning BE code.
1625     the logger may need to be imported to the x86archtemplate. unknown yet.
1626 codeman 432 Added the finishing_cleanup function.
1627 codeman 433 added a fix to the logger from BenUrban
1628 codeman 427
1629 wolf31o2 1475 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1630 codeman 422 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1631     URIs. The blank uri check has been commented out.
1632 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1633 codeman 422
1634 wolf31o2 1475 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1635 agaffney 419 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1636    
1637 wolf31o2 1475 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1638 agaffney 415 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1639 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1640 agaffney 415
1641 wolf31o2 1475 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1642 codeman 409 small changes to setup_network_post. moved adding to runlevel of net.x to
1643     after the device gets symlinked. added domainname runlevel command.
1644    
1645 wolf31o2 1475 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1646 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1647 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1648     spawn() call in livecd-kernel code to pass environment variables.
1649 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1650     the install profile if available.
1651 agaffney 402
1652 wolf31o2 1475 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1653 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1654     to handle installing the livecd kernel into the new system.
1655    
1656 wolf31o2 1475 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1657 codeman 395 should emerge hotplug and coldplug before adding them to runlevel.
1658    
1659 wolf31o2 1475 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 codeman 395 took chroot out of grub_install command.
1661    
1662 wolf31o2 1475 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1663 codeman 395 Changed chroot wrapper code in spawn() to write the wrapper the python way
1664     instead of the bash way to avoid quote conflicts. Added
1665 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1666 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1667     as it breaks the piping.
1668 codeman 390
1669 wolf31o2 1475 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1670 codeman 387 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1671    
1672 wolf31o2 1475 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1673 agaffney 385 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1674 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1675 agaffney 389 GLIInstallProfile.
1676 agaffney 385
1677 wolf31o2 1475 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1679     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1680     into /mnt/gentoo in prepare_chroot()
1681 agaffney 379
1682 wolf31o2 1475 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1683 agaffney 375 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1684 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1685     to start/end sectors
1686 agaffney 375
1687 wolf31o2 1475 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1688 agaffney 374 Add 2>&1 to cmd in spawn()
1689    
1690 wolf31o2 1475 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1691 agaffney 369 Modified GLIUtility.exitsuccess() to work with return value from
1692 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1693     creates wrapper script for commands run inside chroot so multiple commands
1694 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1695     for the generated script from spawn()
1696 agaffney 369
1697 wolf31o2 1475 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1698 codeman 361 Removed default values for stage tarball URI and portage tree URI from
1699     InstallProfile. These should be set by the FEs. also added services step to
1700     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1701     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1702    
1703 wolf31o2 1475 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1704 codeman 359 Small fix for setting the default gateway. Also added feature to dialogfe.
1705    
1706 wolf31o2 1475 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1707 agaffney 357 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1708    
1709 wolf31o2 1475 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1710 codeman 346 Fixed a bunch of true -> True typos. lots of em
1711 codeman 347 only write new resolv.conf if there are dns servers listed.
1712 codeman 345
1713 wolf31o2 1475 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1714 agaffney 343 Commented out 'display_on_tty8=True' in start_portmap()
1715    
1716 wolf31o2 1475 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1717 codeman 341 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1718    
1719 wolf31o2 1475 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1720 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1721     lang parameter to __init__()
1722 codeman 331
1723 wolf31o2 1475 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1724 codeman 331 updates to TODO list.
1725 esammer 4
1726 wolf31o2 1475 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1727 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1728     'emerge -p blah'
1729 agaffney 322
1730 wolf31o2 1475 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1731 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1732     added quickpkg to TODO list
1733 codeman 319
1734 wolf31o2 1475 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1735 codeman 318 Changed the raising of 'warning' exceptions to a simple log of the error
1736     so that the installer can continue.
1737    
1738 wolf31o2 1475 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1739 codeman 314 Some big changes. First, changed most output to display_on_tty8.
1740     Second, added log lines to all templates. Some smaller fixes such as typos.
1741     Also did some cleanups of old commented lines.
1742    
1743 wolf31o2 1475 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1744 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1745 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1746 agaffney 310
1747 wolf31o2 1475 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1748 codeman 306 more updates to TODO list. hopefully we'll soon start removing items instead
1749     of adding them.
1750    
1751 wolf31o2 1475 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1752 agaffney 301 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1753    
1754 wolf31o2 1475 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1755 codeman 295 updated TODO list. (again)
1756 codeman 293
1757 wolf31o2 1475 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1758 codeman 286 changed output of portmap start to display_on_tty8.
1759     fixed bootloader for udev and multiple kernels
1760 codeman 288 fixed custom kernel config (again)
1761 codeman 286
1762 wolf31o2 1475 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1763 codeman 281 changed default value of CC._enable_ssh to True because this is smart.
1764 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1765 codeman 281
1766 wolf31o2 1475 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1767 agaffney 278 partition() now waits until after it checks for partition flags before delete
1768     the partitions :P
1769    
1770 wolf31o2 1475 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1771 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1772 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1773     blank.
1774 agaffney 271
1775 wolf31o2 1475 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1776 codeman 268 Various fixes related to the add_users function. Still not yet finished.
1777 codeman 269 Added things to the TODO list. Lets start using that!
1778 codeman 268
1779 wolf31o2 1475 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1780 agaffney 264 Added code to x86Template to format newly created partitions. Also added
1781 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1782 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1783     mounting code.
1784 agaffney 264
1785 wolf31o2 1475 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1786 codeman 263 Took out unnecessary setting of random livecd root password. the cd already
1787     sets it randomly.
1788    
1789 wolf31o2 1475 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1790 agaffney 255 Took out an unneeded step from CC's run()
1791    
1792 wolf31o2 1475 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1793 codeman 248 Attempt at detecting and adding windows partitions to lilo.
1794    
1795 wolf31o2 1475 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1796 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1797     partition. fixed misc exit_status => exitstatus typo.
1798 codeman 235
1799 wolf31o2 1475 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1800 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1801     resizing ntfs and ext2/3.
1802 agaffney 230
1803 wolf31o2 1475 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1804 agaffney 228 Fixed partition() in x86Template so that it scans through logicals and deletes
1805 agaffney 229 before deleting containing extended partition. Also clears partition table to
1806     be safe before third pass.
1807 agaffney 228
1808 wolf31o2 1475 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1809 codeman 226 Added mount_network_shares. not able to test it from this computer.
1810     will test when i get back to school.
1811     also added start_portmap to the client_controller as an always-do.
1812     agaffney says this is needed for NFS mounts to work.
1813    
1814 wolf31o2 1475 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1815 agaffney 225 Partial rewrite of partitioning code in x86Template. No longer shells out to
1816     parted to perform actions, now uses all pyparted calls. Code "works" in a
1817     test, but still needs lots of TLC. Also modified tests/install.py to work
1818     with x86Template and GLIClientConfiguration.
1819    
1820 wolf31o2 1475 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1821 agaffney 221 Initial move of partitioning code from ArchTemplate to x86Template.
1822 agaffney 220
1823 wolf31o2 1475 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1824 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1825 codeman 222
1826 wolf31o2 1475 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1827     Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1828     agaffney. Test Install ran very well (skipping partitioning).
1829 codeman 219
1830 wolf31o2 1475 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1831     My mid-day update. rewrote mount_local_partitions for order of mounting.
1832     fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1833     partition format. fixed a few _edit_configs. some may still have eluded me.
1834 codeman 215
1835 wolf31o2 1475 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1836     Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1837     to test it.
1838 codeman 213 Just finished mount_local_partitions in GLIArchitectureTemplate
1839    
1840 wolf31o2 1475 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1841 agaffney 212 Added get_num_sectors() to GLIStorageDevice.
1842    
1843 wolf31o2 1475 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1844     GLIStorageDevice now tracks partition boundaries in sectors instead of
1845     cylinders.
1846 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1847     from GLIInstallProfile.
1848 agaffney 205
1849 wolf31o2 1475 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1850 agaffney 188 GLIStorageDevice returns "unknown" instead of "" for get_type()
1851    
1852 wolf31o2 1475 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1853 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1854     actually work. Commented out resizability checking code for speed.
1855 agaffney 183
1856 wolf31o2 1475 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1857     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1858     in GLIStorageDevice at the suggestion of plors
1859 agaffney 174
1860 wolf31o2 1475 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1861 agaffney 162 Added a function to GLIUtility to pull a value from a make.conf-style config
1862 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1863 agaffney 162
1864 wolf31o2 1475 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1865     Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1866     Separated network mounts from partition data structure in GLIInstallProfile
1867 agaffney 161
1868 wolf31o2 1475 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1869 agaffney 147 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1870     can be resized.
1871    
1872 wolf31o2 1475 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1873 codeman 91 Added some of the final functions to GLIInstallTemplate.
1874     Yes this project is still active despite rare use of the Changelog!
1875    
1876 wolf31o2 1475 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1877 npmccallum 58 Added the GLIPartitionTools.py file. This is a temporary insertion of
1878     partitioning tools that will eventually go into their own package.
1879    
1880 wolf31o2 1475 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1881     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1882     run-time for the program). Added __init__(install_profile,
1883     client_configuration) to GLI.InstallProfile. This sets install_profile and
1884     client_configuration once so as to avoid constantly passing stuff every time
1885     we call a method.
1886 npmccallum 33
1887 wolf31o2 1475 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1888 npmccallum 28
1889 wolf31o2 1475 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1890     config files without messing up all the other stuff in them. This will be
1891     used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1892 npmccallum 28
1893 wolf31o2 1475 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1894 npmccallum 27
1895 wolf31o2 1475 Added GLI.InstallTemplate framework. This is not yet functional. However,
1896     it does have a few basic things. I added two private methods. One is
1897     _depends(). This will be used for dependency checking (ie. unpacking a
1898     tarball requires that partitioning has been done). The other is
1899     _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1900     instead of being run in the liveCD environment, it runs in the chroot. This
1901     requires a bit of fork() magic, so I isolated the code. Hope to work more
1902     this week to get this class formed...
1903 npmccallum 27
1904 wolf31o2 1475 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1905     Added SAX parsing. Made GLI.InstallProfile a subclass of
1906     xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1907     to be lists instead of tuples to allow for easier modification (mutable,
1908     rather than immutable objects). Updated existing pydoc and added more.
1909     Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1910     GLI.py a bit. Fixed all accessors to use self references.
1911 esammer 7 Added initial unit test code.
1912    
1913 wolf31o2 1475 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1914 esammer 4 Added initial changelog. Setting up the basic structure of the CVS repository
1915     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1916     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20