/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1050 - (show annotations) (download)
Tue Nov 8 04:04:06 2005 UTC (8 years, 10 months ago) by agaffney
File size: 54547 byte(s)
whoops...that shouldn't have been commented ou

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.471 2005/11/08 04:04:06 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/net/server/handlers/WebGLIHandler.py:
10 initial 'pretty' partition table display support
11 clicking partition in 'pretty' display works instead of radio buttons
12 radio buttons and pretty display work together
13 META redirect instead of javascript
14 pretty display stretches across entire screen
15 'Recommended layout' and 'Clear drive' functions
16 properly catch exceptions from do_recommended()
17 src/GLIArchitectureTemplate.py:
18 replace preinst, copy, postinst, rm steps with qmerge
19 whoops...that shouldn't have been commented out
20
21 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
22 src/GLIStorageDevice.py:
23 initial generic disk support
24 fixes for add_partition() code
25 src/net/server/handlers/WebGLIHandler.py:
26 added support for creating generic disks
27 add new partition working
28 save and delete partitions
29
30 6 Nov 2005; Preston Cody <codeman@gentoo.org>
31 webgli: Partitioning making progress.
32
33 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIArchitectureTemplate.py:
35 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
36 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
37 dir) and works around /etc/gconf symlink problem
38
39 5 Nov 2005; Preston Cody <codeman@gentoo.org>
40 webgli: lots of updates. preliminary partitioning. extra packages works.
41
42 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
43 src/net/server/gliserv.py:
44 httpd now supports HTTPS and falls back to HTTP if not available
45 make fallback actually work
46 src/net/server/SecureXMLRPCServer.py:
47 SecureSocketServer is now threaded
48
49 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
50 src/net/client/gliclient.py:
51 try to use HTTPS for XMLRPC first and fallback to HTTP
52 pretend mode
53 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
54 HTTPS XMLRPC goodness from samyron
55 pass name of certificate
56
57 31 Oct 2005; Preston Cody <codeman@gentoo.org>
58 wegli: daemons and services screens done.
59
60 30 Oct 2005; Preston Cody <codeman@gentoo.org>
61 webgli: networking and users screens
62 added return_redirect to handler.py
63 loading and saving install/client profiles works for webgli now
64 Review also done
65
66 *GLI-0.2 (27 Oct 2005)
67
68 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
69 src/templates/x86ArchitectureTemplate.py:
70 properly check for bootloader emerge exist status with exitsuccess()
71 log output of grub install command
72 add --batch --no-floppy to grub command
73 grubinstallstring only gets logged if debug is on
74 src/GLIUtility.py:
75 update progress bar to 100% when process finishes
76
77 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
78 src/GLIClientController.py:
79 added debugging code for the interaction between the 2 threads via Event()
80 src/GLIUtility.py:
81 doubled the buffer size in spawn()
82 bump buffer size up to 16384
83 only report progress in 5% increments
84 src/GLIArchitectureTemplate.py:
85 kernelpkgs.txt support code
86 above disabled because it sucks
87 added add_pkg_to_world()
88
89 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
90 src/GLIArchitectureTemplate.py:
91 use tar | tar to copy files in copy_pkg_to_chroot()
92 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
93
94 23 Oct 2005; Preston Cody <codeman@gentoo.org>
95 DEBUGGING ADDED TO AT. verbose field added to CConfig.
96
97 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
98 src/net/server/gliserv.py:
99 / maps to index.html
100 look for actual files in html/
101 src/net/html:
102 new template
103 src/GLIUtility.py:
104 added parse_vdb_contents()
105 src/GLIArchitectureTemplate.py:
106 added copy_pkg_to_chroot()
107 added debug code to dynamic-stage3
108 switch dynamic-stage3 to new method
109 lots of bug fixes from adding debug code
110
111 22 Oct 2005; Preston Cody <codeman@gentoo.org>
112 webgli initial bootloader support + changed make.conf.
113 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
114
115 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
116 src/GLIUtility.py:
117 horrible tangled mess of code that is tarball unpacking subprogress display
118 add unpack progress to portage snapshot
119 use read() instead of readlines() in spawn()
120 only update progress bar for whole percents
121
122 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
123 src/templates/x86ArchitectureTemplate.py:
124 change call to 'grub' to use GLIUtility.exitsuccess()
125 add definition of 'build_mode' in _configure_lilo()
126 src/misc/updategtkfe, src/misc/updateglid:
127 fix so subshell is called in root shell
128
129 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
130 src/net/server/handlers/WebGLIHandler.py:
131 stage screen launches URI browser in sized window with various properties set
132
133 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
134 src/misc/updategtkfe:
135 updated to actually work
136 remove previous snapshot and extracted dir before downloading
137 src/misc/updateglid:
138 updated to actually work
139 src/templates/x86ArchitectureTemplate.py:
140 fixed bug where grub code was looking for 'root+root+file_name2'
141
142 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
143 src/net/server/handlers/WebGLIHandler.py:
144 URI browser
145 added mirror selection
146 src/GLIUtility.py:
147 ls via ssh strips off ending *
148
149 16 Oct 2005; Preston Cody <codeman@gentoo.org>
150 more updates to webgli. stage selection.
151
152 11 Oct 2005; Preston Cody <codeman@gentoo.org>
153 updated webgli with preliminary Network Mounts support.
154
155 9 Oct 2005; Preston Cody <codeman@gentoo.org>
156 GenDialog: string formatting and yes/no label fixes.
157 added WebGLI template for gliserv.py
158 added WebGLIHandler as well as a definition for it in gliserv.py
159 updates to the webgli files even though they won't be there for long.
160 Utility: remove exception for non-existant grppkgs.txt until the new livecd
161 goes public.
162
163 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
164 src/net/server/gliserv.py:
165 override dict to not be so anal
166 main server now loads separate module to handle requests
167 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
168 split out profile URLs into separate handler function
169 move handlers into subdirectory
170 add Welcome and Clients handlers
171
172 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
173 src/GLIUtility.py:
174 raise exception if password prompt received twice
175
176 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
177 src/GLIUtility.py:
178 removed rot13ify()
179
180 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
181 src/net/server/gliserv.py:
182 allow for param to be passed multiple times in GET
183 no XMLRPC functions return None
184 modify POST request parsing to only create a list if needed
185 fix GET request parsing so the list creation for multiple values works
186 src/net/client/gliclient.py:
187 various typo and type mismatch fixes
188 exit after exception
189
190 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
191 src/net/client/gliclient.py:
192 initial commit
193 pass MAC to XMLRPC functions
194 src/net/server/GLIServerProfile.py:
195 rename GLIClientsProfiles to GLIServerProfile
196
197 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/net/server/gliserv.py:
199 now handles POST requests
200 move majority of request handling code to common_handler() to reduce code
201 duplication
202 profile loading
203 client reg via XMLRPC goes into SharedInfo()
204 /showclients redesign
205 template fixes
206 allow handler functions to add/change headers
207 save profile
208
209 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/net/server/GLIClientsProfiles.py:
211 initial commit
212 src/net/server/template.html:
213 initial commit
214 src/net/server/gliserv.py:
215 add template mojo
216
217 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
218 src/net/server/gliserv.py:
219 XMLRPC mojo
220
221 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
222 src/GLIArchitectureTemplate.py:
223 add code in _edit_config() to comment line where variable is defined
224 previously
225 insert new line under previous definition of variable if it exists
226 small _edit_config() cleanup
227 src/GLIStorageDevice.py:
228 add clear_partitions() function
229 new sizes for recommended partition layout
230 automatically calculate swap size for recommended layout
231
232 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
233 src/templates/x86ArchitectureTemplate.py:
234 fat16 mojo
235
236 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
237 src/GLIStorageDevice.py:
238 prevent do_recommended() from being run twice
239 rewrite do_recommended() to be more robust
240 src/GLIArchitectureTemplate.py:
241 rework _edit_config() to not write duplicate entries
242
243 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
244 src/GLIStorageDevice.py:
245 added do_recommended() function to automatically created 256M/1G/* layout
246
247 17 Sep 2005; Preston Cody <codeman@gentoo.org>
248 src/gli-dialog.py: added set_distcc to the list
249 GenDialog: added set_distcc. untested.
250 IP: added install_distcc flag.
251 AT: added install_distcc function based on the flag. runs after build_kernel
252 changed AT spawn command for distcc for nodeps.
253
254 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/GLIUtility.py:
256 add rot13ify() function
257
258 16 Sep 2005; Preston Cody <codeman@gentoo.org>
259 src/GenDialog.py
260 added a sentence of text. unchecking support added.
261
262 15 Sep 2005; Preston Cody <codeman@gentoo.org>
263 src/GLIUtility.py
264 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
265 src/GenDialog.py
266 still working on extra_packages. transformed the list to new format.
267 added GRP indication to list. untested.
268 TODO lists updated.
269 src/fe/dialog/gli-dialog.py
270 spelling mistook.
271
272 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
273 src/GLIUtility.py:
274 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
275
276 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
277 src/GLIUtility.py:
278 add get_directory_listing_from_uri()
279 add http support to above
280 add ftp support to above
281 add scp support to above
282 src/GLIArchitectureTemplate.py:
283 "0" instead of 0 for key of single-element dict passed to _edit_config()
284
285 5 Sep 2005; Preston Cody <codeman@gentoo.org>
286 value_only -> only_value
287
288 3 Sep 2005; Preston Cody <codeman@gentoo.org>
289 gutted out all of etc_portage structure since it is now all handled by
290 etc_files
291
292 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
293 src/GLIArchitectureTemplate.py:
294 install_packages() sends progress update notifications
295 src/templates/x86ArchitectureTemplate.py:
296 increase sleep to 5s between format tries
297 src/GLIClientController.py:
298 pass 'self' to AT instead of 'self._pretend'
299
300 2 Sep 2005; Preston Cody <codeman@gentoo.org>
301 logger -> logger.log in x86AT
302
303 1 Sep 2005; Preston Cody <codeman@gentoo.org>
304 added set_etc_portage to IP. debugging gli-d's support for it.
305
306 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
307 src/templates/x86ArchitectureTemplate.py:
308 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
309
310 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
311 src/GLIArchitectureTemplate.py:
312 add _portage_best_version() function and rework install_packages() to allow
313 for future X of Y tracking
314 Use best_visible instead of best_version
315 tracked down and fixed missing = causing empty install extra packages
316 use = when emerging also
317 quickpkg hokey pokey
318 run _get_packages_to_emerge() again with -pk
319
320 22 Aug 2005; Preston Cody <codeman@gentoo.org>
321 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
322 the end of install_packages.
323 added updateglid to /src/misc
324 updated all core files with new GPL notice and copyright statement.
325
326 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
327 src/GLIUtility.py:
328 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
329 a snapshot in /mnt/cdrom/snapshots/
330 get_snapshot_from_cd() adds file:// at the beginning
331 change calls to extra package special case functions to 'self.blah'
332
333 21 Aug 2005; Preston Cody <codeman@gentoo.org>
334 src/ArchTemplate: changed "voodoo".
335 changed order of portage sync methods. made a fallback to webrsync if
336 normal emerge sync fails.
337 removed get_sources_from_cd because it is obsolete.
338 add special cases to install_packages. remove fatal exception on package
339 install failure b/c the box will still be bootable.
340 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
341 handled in the FEs.
342 src/GenDialog: added a bunch of code for dealing with x11-based packages.
343 awaiting testing.
344
345 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIStorageDevice.py:
347 global try/except block around fs resizable detection code
348 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
349 install-failed cleanup function
350
351 18 Aug 2005; Preston Cody <codeman@gentoo.org>
352 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
353
354 16 Aug 2005; Preston Cody <codeman@gentoo.org>
355 GLIGenDialog:
356 add drive choices for loaded configs.
357 force snapshot for dynamic_stage3
358 init the snapshoturi input to the cd snapshot if not already selected.
359 if dynamic_stage3, skip the make.conf step.
360 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
361 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
362
363 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
364 src/GLIArchitectureTemplate.py:
365 manually call MAKEDEV in stage3-dynamic code
366 copy /etc/inittab.old to /etc/inittab in chroot
367 src/GLIUtility.py:
368 add beginning of validate_uri() function
369 add file:/// support to validate_uri()
370 single quotes when setting livecd password
371
372 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
373 src/GLIGenDialog.py:
374 change getmountpoint() to get_mountpoint()
375 src/misc/updategtkfe:
376 committed script to automatically download latest snapshot and run gtkfe
377 src/templates/x86ArchitectureTemplate.py:
378 fix _configure_lilo_add_windows() for IP -> GLISD stuff
379 src/GLIArchitectureTemplate.py:
380 give tmp_minor an initial value in mount_local_partitions so that the value
381 remain from the previous drive
382
383 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
384 src/templates/x86ArchitectureTemplate.py:
385 Fix _configure_lilo() for IP using GLISD stuff
386 src/GLIArchitectureTemplate.py:
387 install_cron_daemon() treats "none" specially
388
389 14 Aug 2005; Preston Cody <codeman@gentoo.org>
390 old patch from Steven Mertens to resolve bug #96642
391 numerous asthetic changes to GenDialog, no real functionality changes though.
392 strings renamed for global use if necessary.
393 fix all three parts of bug 102291
394 disable set_etc_portage until fully-written.
395
396 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
397 src/GLIClientController.py:
398 lower-case http/ftp proxy envvars
399
400 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
401 src/GLIClientController.py:
402 log end of pre_install steps to aid in debugging
403 src/templates/x86ArchitectureTemplate.py:
404 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
405
406 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
407 src/GLIArchitectureTemplate.py
408 check to make sure that the device node we're wait for to exist isn't of
409 type 'free'
410
411 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
412 src/GLIGenDialog.py:
413 convert install_packages to list in set_extra_packages()
414 check return code of checklist() call in "Manual" section
415 *actually* fix the first problem
416
417 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
418 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
419 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
420
421 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/GLIArchitectureTemplate.py:
423 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
424
425 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
426 Add CDATA support to SimpleXMLParser and add utility functions for it.
427
428 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
429 src/GLIArchitectureTemplate.py:
430 Fix case where vixie-cron is specified as a full package atom, as we still
431 don't want to run 'crontab /etc/crontab' for it.
432
433 *GLI-0.1 (3 Aug 2005)
434
435 30 Jul 2005; Preston Cody <codeman@gentoo.org>
436 add scp to list of is_uri() so GenDialog doesn't complain.
437 fixed livecd-kernel bug in bootloader code.
438 fixed gendialog for dynamic_stage3 instead of "networkless"
439 change bootloader to allow for both initrd and initramfs.
440 fix IP for dynamic_stage3.
441 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
442
443 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
444 Added full scp:// URI support to get_uri() in GLIUtility
445 Remove "networkless" from dynamic stage3 if locic.
446 Remove print statement from scp:// code.
447 Change scp code to check for "assword: " instead of "Password:"
448 Fix post-install network code to create net.eth1+ symlink correctly
449 Check to make sure pkg can be split on / and some debugging code
450 Add 2>dev/null to emerge call in _get_packages_to_emerge()
451 SimpleXMLParser handles True/False/None correctly now
452 Comment out above fix
453 Add partitioning wait-for-device-to-exist code to mount_local_partitions
454
455 28 Jul 2005; Scott Myron <samyron@gentoo.org>
456 Removed a FIXME in the GLIClientConfiguration that is no
457 longer needed.
458
459 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
460 Default to x86 in ClientConfig
461 Typo in build-a-stage3 code.
462 Remove MAKEDEV call in build-a-stage3 postscript.
463
464 26 Jul 2005; Preston Cody <codeman@gentoo.org>
465 Rewrote init of IP for gli-d. Other GenDialog updates.
466 allow network_type to be None in CConfig.
467
468 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
469 Add _dynamic_stage3 option to IP.
470 Add check for that option to dynamic stage3 code in ArchTemplate.
471 Fix code to determine default route in get_eth_info() in GLIUtility.
472 Fix serialization of dns-servers in ClientConfig.
473
474 24 Jul 2005; Preston Cody <codeman@gentoo.org>
475 changed default values of cron/logger in IP.
476 moved GenDialog IP init out to the individual files. gli-dialog's version
477 will change quite a bit.
478
479 22 Jul 2005; Preston Cody <codeman@gentoo.org>
480 added ppcArchTemplate. blank now. working on yaboot.
481 modified ArchTemplate for amd64 and ppc custom kernels.
482 skeleton implementation of _configure_yaboot.
483 small fixes to other templates.
484
485 21 Jul 2005; Preston Cody <codeman@gentoo.org>
486 GenDialog updates. changed comment in IP.
487
488 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
489 src/GLIInstallProfile.py:
490 Fix codeman's screwup of changing the service seperator to ',' in the parser
491 without changing it in the serialization code! Also document this in a
492 comment so you find it easier. Everybody needs to make sure they update
493 their install profiles!
494
495 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
496 src/GLIArchitectureTemplate.py:
497 Fix casting of list to string and concat of None with string, as well as
498 commented prototype of checking that mounting actually worked (found a case
499 where mount can return success, but the mount won't be done).
500
501 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
502 src/templates/x86ArchitectureTemplate.py:
503 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
504 checking for the device, and sleeping 1 second each time.
505
506 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
507 src/templates/x86ArchitectureTemplate.py:
508 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
509 bootloader works again. Also rename _install_{grub,lilo} to
510 _configure_{grub,lilo} since they don't install the loaders anymore
511 themselves.
512
513 7 Jul 2005; Preston Cody <codeman@gentoo.org>
514 fix global USE flags to not include the arch types at the end.
515 updates to GenDialog and gli-d.
516
517 6 Jul 2005; Preston Cody <codeman@gentoo.org>
518 fixing bootloader code for no initrd and initrd->initramfs naming change.
519
520 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
521 Proper comments and parameters to GLIException in install_mta()
522 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
523 Add strip() to list_mirrors(), list_subarch_from_mirror() and
524 list_tarball_from_mirror() to eliminate blank last item.
525
526 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
527 Added stage3 generation code.
528
529 5 Jul 2005; Preston Cody <codeman@gentoo.org>
530 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
531 Mild changes to GenDialog.
532
533 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
534 Remove separate install step configure_rc_conf() since it's handled by
535 update_config_files()
536 Make a copy of newvalues in _edit_config() so quotes aren't added when the
537 function is called twice on the same file.
538
539 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
540 Missing \ in sed in _get_packages_to_emerge()
541 Removed explicit emerging of hotplug and no longer add it to the runlevel.
542 Check in _quickpkg_deps() to ignore blank package names returned from
543 _get_packages_to_emerge()
544
545 28 Jun 2005; Preston Cody <codeman@gentoo.org>
546 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
547 in the dialog.py gauge code.
548
549 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
550 Add code to update_config_files() to go through etc_files and update stuff.
551 Check to see that _etc_files['make.conf'] exists in get_make_conf()
552 Only use float() in partition xml parsing code if type == "free"
553
554 28 Jun 2005; Preston Cody <codeman@gentoo.org>
555 finished almost all internationalization of GenDialog.
556 attempt at fixing rc.conf function. moved 3 generate functions out of
557 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
558 added dialog.py to the fe/dialog directory so it actually gets used.
559
560 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
561 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
562
563 27 Jun 2005; Preston Cody <codeman@gentoo.org>
564 fix extra entry in list_mirrors()
565 beginning internationalization runthrough.
566
567 26 Jun 2005; Preston Cody <codeman@gentoo.org>
568 added dialog.py to /src temporarily until it gets accepted upstream.
569 fix for unused value in form in dialog.py and changed heights.
570 fix GenDialog forms.
571
572 25 Jun 2005; Preston Cody <codeman@gentoo.org>
573 Changed hostname/domainname for new baselayout.
574 Changed _add_to_runlevel errors to logs.
575 Updated TODO list to show status of GenDialog
576 More updates to GenDialog including two checklists that probably won't work.
577 update IP to use comma-separated list instead of space separated for services.
578
579 24 Jun 2005; Preston Cody <codeman@gentoo.org>
580 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
581 GenDialog as it gets closer to completion.
582
583 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
584 Modify get_eth_info() to take a full interface name (eth0 fex). float()
585 instead of int() in add_partition_device_partition() for minor (closes 96804)
586
587 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
588 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
589 instead of 'interfaces[interface][1]' since DHCP uses that field for its
590 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
591
592 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
593 Apply spawn() patch from #96644 (with minor changes). Make sure the return
594 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
595 small error with <pipe>.close() returning None. Fix space vs. tab issue.
596 Fix undefined variable 'output' issue in spawn().
597
598 20 Jun 2005; Preston Cody <codeman@gentoo.org>
599 More updates to GenDialog and gli-d.
600
601 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
602 Modify list_mirrors() to return a list of mirror URL/name pairs.
603
604 19 Jun 2005; Preston Cody <codeman@gentoo.org>
605 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
606 get subarch.
607
608 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
609 Backend partitioning will create disklabel is none exists. Installprofile
610 defaults to "" now instead of "msdos" for disklabel type. Fix for
611 mount_local_partitions() to remember device along with minor in the
612 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
613 add else block to log unsupported netmount types to mount_network_shares()
614
615 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
616 src/GLIArchitectureTemplate.py:
617 Refactor kernel_compile common stuff, fix 2.4 build process.
618 src/fe/cli/clife.py:
619 Logging system.
620 src/GLIUtility.py, src/GLIStorageDevice.py:
621 Add comments about re-writes needed for boxes without sysfs.
622
623 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
624 src/GLIArchitectureTemplate.py:
625 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
626 'make dep' call for custom compile. build_mode support for prepare-only and
627 none types completed. custom compile function chains shell functions in
628 spawned script, to allow for catching all errors.
629
630 15 Jun 2005; Preston Cody <codeman@gentoo.org>
631 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
632 and GenDialog. other gendialog updates as well. kernel updates untested.
633
634 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
635 src/GLIInstallProfile.py:
636 Change structure of etc-portage stuff. The serialization was broken before my
637 last commit, and I am the only person that's ever used it. The new schema is
638 as follows:
639 <etc-portage>
640 <file name="package.mask"/>
641 <file name="package.unmask">
642 <entry atom="sys-kernel/openmosix-sources"/>
643 </file>
644 <file name="package.use">
645 <entry atom="sys-libs/db">
646 -java
647 </entry>
648 <entry atom="dev-libs/cyrus-sasl">
649 -ldap
650 </entry>
651 </file>
652 </etc-portage>
653
654
655 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
656 src/GLIInstallProfile.py:
657 Add new entry for gli-profile/kernel-build-method item. Add missing
658 serialize_etc_portage (temporary). Make serialize_make_conf always print the
659 keys in the same order.
660
661 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
662 src/GLIArchitectureTemplate.py:
663 Clean up commenting used by _edit_config(), and fix bug where wrong comment
664 was repeatedly appended to make.conf.
665
666 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
667 src/GLIArchitectureTemplate.py:
668 Put some Linux-2.6 specific code under a if statement. Store list of
669 successfully mounted swap device for using swapoff. Add proper error checking
670 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
671 'file'. Clean up some redundant code (thanks to pychecker).'
672
673 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
674 Fix typos: get_extended() instead of get_extended_partition(). Added
675 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
676 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
677
678 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
679 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
680 in add_network_interface.
681
682 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
683 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
684 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
685 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
686 prepare_chroot.
687
688 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
689 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
690 +src/fe/installer-gtk:
691 Add new automated CLI frontend. Add scripts that are the intended means to
692 use each frontend.
693
694 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
695 src/GLIClientController.py:
696 Add null type to network config, for cases where the interface is already up
697 and should not be touched (netboot for example).
698
699 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
700 src/GLIArchitectureTemplate.py:
701 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
702 string!. Try to use binary packages if available by default.
703
704 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
705 src/GLIArchitectureTemplate.py:
706 More error checking for _add_to_runlevel, to ensure that the init script
707 actually exists before we try to add it. set_services phase must take place
708 after the package installation, otherwise the init scripts might not exist.
709 Find the correct init script for the cron and logging daemons, and add that
710 instead of the package atom.
711
712 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
713 src/GLIArchitectureTemplate.py:
714 Fix up _edit_config so that it works if the file doesn't already exist. Fix
715 usage of 'file' to 'contents' for the variable name, as it shadows
716 __builtin__.file.
717
718 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
719 src/GLIArchitectureTemplate.py:
720 Add MTA install code, and include MTA install phase. Ensure
721 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
722 for 'none' kernel config for build_kernel phase. Put kernel_script in
723 /var/tmp instead of /root for build_kernel phase.
724
725 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
726 Rename mta variables to match syslog/cron variables.
727
728 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
729 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
730 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
731 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
732 src/templates/.cvsignore, src/tests/.cvsignore:
733 Refactor partition formatting again to include error checking. Allow 'none'
734 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
735
736 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
737 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
738 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
739 only have a single spawn call.
740
741 11 Jun 2005; Preston Cody <codeman@gentoo.org>
742 refixed samyron's fix of set_architecture_template.
743
744 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
745 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
746 be executable.
747
748 10 Jun 2005; Scott Myron <samyron@gentoo.org>
749 Fixed one of the FIXME's in the ClientConfiguration. There is now some
750 error checking when you call set_architecture_template.
751
752 10 Jun 2005; Preston Cody <codeman@gentoo.org>
753 moved the mkfsopts input to the partition options menu instead of the during
754 the creation process. updated GenDialog to say it supports reiserfs v3.
755
756 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
757 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
758 Complete support for 'mkfsopts' parameter in main system and dialogfe.
759 Add support for other partition types to dialogfe.
760 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
761 avoid integer overflows and wraparounds.
762
763 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
764 Removed start/end from XML output and added mkfsopts to partitioning info.
765 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
766 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
767 in GLIClientConfiguration. Change from .1 and .9 to constants for
768 partitioning. Fix free space overwriting bug. Remove a few unused functions
769 from rewrite. Fix call to get_partition_at()
770
771 8 Jun 2005; Preston Cody <codeman@gentoo.org>
772 Updates to GenDialog and dialogfe.
773
774 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
775 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
776
777 6 Jun 2005; Preston Cody <codeman@gentoo.org>
778 more GenDialog updates to partitioning.
779
780 5 Jun 2005; Preston Cody <codeman@gentoo.org>
781 Indenting issue in GLISD/get_ordered_partition_list.
782 updates to GenDialog partitioning and added default UTC for timezone in IP.
783
784 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
785 Added GLISD.get_model()
786
787 3 Jun 2005; Preston Cody <codeman@gentoo.org>
788 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
789 More updates to GenDialog :)
790
791 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
792 Added get_interface_realname() function.
793
794 2 Jun 2005; Preston Cody <codeman@gentoo.org>
795 Added auto-save of CConfig and copying to new /root after install.
796 yet even more GenDialog updates.
797
798 1 Jun 2005; Preston Cody <codeman@gentoo.org>
799 removed print statement from GLISD. more updates to GenDialog.
800
801 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
802 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
803 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
804 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
805 places in GLIClientConfiguration.
806
807 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
808 Fix mount_local_partitions(), configure_fstab(), and
809 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
810 A few more fixes for templates/x86Archtemplate
811
812 27 May 2005; Preston Cody <codeman@gentoo.org>
813 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
814 a work in progress.
815
816 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
817 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
818 directly. GLISD can now handle data imported from XML.
819
820 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
821 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
822 handle blank (no disklabel) disks.
823
824 20 May 2005; Preston Cody <codeman@gentoo.org>
825 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
826 up, documented, and separated out serialization and grouped all sections.
827
828 19 May 2005; Preston Cody <codeman@gentoo.org>
829 Reorganization of ClientConfiguration and gutting of unused functions.
830 Removed verbose option from CC. Moved import statement in IP and CConfig up.
831
832 18 May 2005; Preston Cody <codeman@gentoo.org>
833 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
834
835 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
837 partitioning. CC serializes install profile to disk and prepare_chroot()
838 copies it into /mnt/gentoo/root
839
840 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
841 Moved URI parsing into new function parse_uri()
842
843 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
844 Added XMLParser module.
845
846 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
847 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
848 Minor fix to is_uri() regex to allow hyphens in hostname.
849
850 12 May 2005; Preston Cody <codeman@gentoo.org>
851 Updated finishing_cleanup for new unmounting method from agaffney.
852
853 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
854 Fix GLILogger to use correct time format string. Fix _edit_config() to
855 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
856 unicode support to is_realstring().
857
858 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
859 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
860 return value instead of non-zero. Add code to output a traceback to the
861 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
862 instead of --nocolor.
863
864 10 May 2005; Preston Cody <codeman@gentoo.org>
865 Added GLIGenDialog.py to make a generic class for the dialog functions that
866 can be used by both dialogfe and the netfe/be. updated both for new filename.
867 date changes. 2004->2005.
868
869 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
870 Removed 'quiet=True' from spawn() calls
871
872 10 May 2005; Preston Cody <codeman@gentoo.org>
873 Updated GLIUtility with patches from chotchki. Also added documentation
874
875 9 May 2005; Preston Cody <codeman@gentoo.org>
876 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
877 Updated _edit_config in ArchTemplate, make_config, and various other fixes
878 from bug #89683, mostly touchups.
879
880 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
881 GLIStorageDevice cleanup patch from bug #91761
882
883 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
884 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
885 _edit_config(). Error logging casts 'error' to str
886
887 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
888 Exceptions received in CC are logged before being passed to the FE. Added
889 code to CC to handle exceptions *not* thrown by the installer itself.
890
891 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
892 get_max_mb_for_resize() returns -1 if not self.resizeable
893
894 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
895 More dirty rsync hacks :-/
896
897 29 Apr 2005; Preston Cody <codeman@gentoo.org>
898 Patches from chotchki (bug #90325) to improve CC networking. untested.
899
900 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
901 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
902 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
903 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
904 GLIStorageDevice as suggested by pychecker. Fix minor bug in
905 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
906 _get_packages_to_emerge()
907
908 28 Apr 2005; Preston Cody <codeman@gentoo.org>
909 Added group-adding code to set_users in ArchTemplate
910
911 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
912 Added post-install script code
913
914 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
915 Fixed encapsulation issues in GLIClientController (bug #90141)
916
917 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
918 Update resizing code in GLIStorageDevice
919
920 17 Apr 2005; Preston Cody <codeman@gentoo.org>
921 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
922
923 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
924 Reverted change to ArchTemplate and added support for commented line in old
925 code.
926
927 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
928 Changed _edit_config() to modify value in-place instead of commenting out and
929 adding the new value to the end of the file.
930
931 15 Apr 2005; Preston Cody <codeman@gentoo.org>
932 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
933 Also updated TODO list.
934
935 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
936 Use blackace's one-liner to add comments for all function for use with
937 pythondoc.
938
939 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
940 Moved 'end >= device_sectors' check out of loop to check for next partition's
941 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
942 Partitioning code now tracks start/end of extended for placing logicals. End
943 point of logical is now adjusted along with start.
944
945 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
946 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
947 the way of partitioning from a blank disk. Add int() around access to minor
948 key in partition information due to new partition code leaving them as float.
949
950 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
951 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
952
953 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
954 Major GLIStorageDevice overhaul...all MB now instead of sectors.
955
956 8 Apr 2005; Scott Myron <samyron@gentoo.org>
957 Added support for DHCP options and MAC addresses in the InstallProfile.
958
959 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
960 Changed mountopts check to work for blank and whitespace. Pipe emerge through
961 sed to properly strip out junk.
962
963 2 Apr 2005; Preston Cody <codeman@gentoo.org>
964 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
965 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
966
967 31 Mar 2005; Preston Cody <codeman@gentoo.org>
968 Fixed indent problem in GLICController
969
970 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
971 Check for disklabel type "loop" and use the device name without a minor.
972
973 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
974 Remove /tmp/compile_output.log and /var/log/install.log when install is
975 complete. Added code to (hopefully) keep 2nd thread running after install.
976 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
977 get_eth_info() function. Remove most of content in amd64ArchTemplate and
978 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
979
980 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
981 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
982 when unpacking tarball.
983
984 28 Mar 2005; Preston Cody <codeman@gentoo.org>
985 rewrote filesystem_tools. looks like it works so ripping out all the old
986 filesystem_tools code.
987
988 26 Mar 2005; Preston Cody <codeman@gentoo.org>
989 Changed the print statements to logging in the partitioning BE code.
990 the logger may need to be imported to the x86archtemplate. unknown yet.
991 Added the finishing_cleanup function.
992 added a fix to the logger from BenUrban
993
994 25 Mar 2005; Preston Cody <codeman@gentoo.org>
995 changed InstallProfile to remove is_uri check on kernel, stage, and portage
996 URIs. The blank uri check has been commented out.
997 ripped out error checking of set_services. this is done by _add_to_runlevel.
998
999 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1000 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1001
1002 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1003 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1004 the install profile if available. Commented out spawn() debugging prints
1005
1006 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1007 small changes to setup_network_post. moved adding to runlevel of net.x to
1008 after the device gets symlinked. added domainname runlevel command.
1009
1010 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1011 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1012 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1013 spawn() call in livecd-kernel code to pass environment variables.
1014 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1015 the install profile if available.
1016
1017 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1019 to handle installing the livecd kernel into the new system.
1020
1021 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1022 should emerge hotplug and coldplug before adding them to runlevel.
1023
1024 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1025 took chroot out of grub_install command.
1026
1027 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1028 Changed chroot wrapper code in spawn() to write the wrapper the python way
1029 instead of the bash way to avoid quote conflicts. Added
1030 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1031 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1032 as it breaks the piping.
1033
1034 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1035 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1036
1037 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1038 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1039 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1040 GLIInstallProfile.
1041
1042 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1043 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1044 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1045 into /mnt/gentoo in prepare_chroot()
1046
1047 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1048 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1049 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1050 to start/end sectors
1051
1052 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1053 Add 2>&1 to cmd in spawn()
1054
1055 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1056 Modified GLIUtility.exitsuccess() to work with return value from
1057 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1058 creates wrapper script for commands run inside chroot so multiple commands
1059 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1060 for the generated script from spawn()
1061
1062 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1063 Removed default values for stage tarball URI and portage tree URI from
1064 InstallProfile. These should be set by the FEs. also added services step to
1065 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1066 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1067
1068 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1069 Small fix for setting the default gateway. Also added feature to dialogfe.
1070
1071 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1072 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1073
1074 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1075 Fixed a bunch of true -> True typos. lots of em
1076 only write new resolv.conf if there are dns servers listed.
1077
1078 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1079 Commented out 'display_on_tty8=True' in start_portmap()
1080
1081 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1082 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1083
1084 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1085 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1086 lang parameter to __init__()
1087
1088 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1089 updates to TODO list.
1090
1091 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1092 Initial code for quickpkg GRP support. Fix loop to grab packages from
1093 'emerge -p blah'
1094
1095 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1096 check for dhcp in the network stuff and emerge it if it is.
1097 added quickpkg to TODO list
1098
1099 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1100 Changed the raising of 'warning' exceptions to a simple log of the error
1101 so that the installer can continue.
1102
1103 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1104 Some big changes. First, changed most output to display_on_tty8.
1105 Second, added log lines to all templates. Some smaller fixes such as typos.
1106 Also did some cleanups of old commented lines.
1107
1108 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1109 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1110 Undo change with fix. Escaping fix in GLIStorageDevice.py
1111
1112 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1113 more updates to TODO list. hopefully we'll soon start removing items instead
1114 of adding them.
1115
1116 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1117 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1118
1119 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1120 updated TODO list. (again)
1121
1122 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1123 changed output of portmap start to display_on_tty8.
1124 fixed bootloader for udev and multiple kernels
1125 fixed custom kernel config (again)
1126
1127 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1128 changed default value of CC._enable_ssh to True because this is smart.
1129 added code to allow custom kernel .config. may be unstable and break. sorry.
1130
1131 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1132 partition() now waits until after it checks for partition flags before delete
1133 the partitions :P
1134
1135 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1136 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1137 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1138 blank.
1139
1140 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1141 Various fixes related to the add_users function. Still not yet finished.
1142 Added things to the TODO list. Lets start using that!
1143
1144 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Added code to x86Template to format newly created partitions. Also added
1146 some error checking code. GLIStorageDevice passes 'minor' with data to
1147 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1148 mounting code.
1149
1150 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1151 Took out unnecessary setting of random livecd root password. the cd already
1152 sets it randomly.
1153
1154 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1155 Took out an unneeded step from CC's run()
1156
1157 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1158 Attempt at detecting and adding windows partitions to lilo.
1159
1160 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1161 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1162 partition. fixed misc exit_status => exitstatus typo.
1163
1164 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1165 Added basic code for resizing filesystems with pyparted. Fixed code for
1166 resizing ntfs and ext2/3.
1167
1168 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1169 Fixed partition() in x86Template so that it scans through logicals and deletes
1170 before deleting containing extended partition. Also clears partition table to
1171 be safe before third pass.
1172
1173 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1174 Added mount_network_shares. not able to test it from this computer.
1175 will test when i get back to school.
1176 also added start_portmap to the client_controller as an always-do.
1177 agaffney says this is needed for NFS mounts to work.
1178
1179 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1180 Partial rewrite of partitioning code in x86Template. No longer shells out to
1181 parted to perform actions, now uses all pyparted calls. Code "works" in a
1182 test, but still needs lots of TLC. Also modified tests/install.py to work
1183 with x86Template and GLIClientConfiguration.
1184
1185 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1186 Initial move of partitioning code from ArchTemplate to x86Template.
1187
1188 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1189 Added grp_install and services to InstallProfile. forgot about the set_root_password
1190
1191 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1192 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1193 Test Install ran very well (skipping partitioning).
1194
1195 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1196 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1197 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1198 some may still have eluded me.
1199
1200 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1201 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1202 Just finished mount_local_partitions in GLIArchitectureTemplate
1203
1204 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Added get_num_sectors() to GLIStorageDevice.
1206
1207 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1209 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1210 from GLIInstallProfile.
1211
1212 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1213 GLIStorageDevice returns "unknown" instead of "" for get_type()
1214
1215 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1216 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1217 actually work. Commented out resizability checking code for speed.
1218
1219 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1220 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1221 GLIStorageDevice at the suggestion of plors
1222
1223 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1224 Added a function to GLIUtility to pull a value from a make.conf-style config
1225 file. Minor type fix to GLIInstallProfile.py
1226
1227 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1228 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1229 network mounts from partition data structure in GLIInstallProfile
1230
1231 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1232 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1233 can be resized.
1234
1235 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1236 Added some of the final functions to GLIInstallTemplate.
1237 Yes this project is still active despite rare use of the Changelog!
1238
1239 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1240 Added the GLIPartitionTools.py file. This is a temporary insertion of
1241 partitioning tools that will eventually go into their own package.
1242
1243 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1244 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1245 for the program). Added __init__(install_profile, client_configuration) to
1246 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1247 to avoid constantly passing stuff every time we call a method.
1248
1249 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1250
1251 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1252 files without messing up all the other stuff in them. This will be used for making
1253 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1254
1255 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1256
1257 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1258 have a few basic things. I added two private methods. One is _depends(). This
1259 will be used for dependency checking (ie. unpacking a tarball requires that
1260 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1261 same syntax as os.system(), however, instead of being run in the liveCD
1262 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1263 isolated the code. Hope to work more this week to get this class formed...
1264
1265 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1266
1267 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1268 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1269 to allow for easier modification (mutable, rather than immutable objects). Updated
1270 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1271 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1272 Added initial unit test code.
1273
1274 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1275
1276 Added initial changelog. Setting up the basic structure of the CVS repository
1277 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1278 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20