/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1180 - (show annotations) (download)
Wed Dec 21 17:06:21 2005 UTC (8 years, 3 months ago) by agaffney
File size: 62409 byte(s)
  src/GLIArchitectureTemplate.py:
  extract /usr/livecd/metadata.tar.bz2 to chroot if it exists

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.540 2005/12/21 17:06:21 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIArchitectureTemplate.py:
10 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
11
12 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
13 src/net/server/gliserv.py:
14 wrap generated code in a class to isolate it a bit better
15 302 redirects work
16 don't use cgi.escape() for <% %>
17 src/net/server/html/webgli/*:
18 load/save profile
19 src/GLIUtility.py:
20 change /sbin/lspci to just lspci
21
22 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
23 src/GLIClientController.py:
24 change ordering of statements in CC run() while loop to not go past the end
25 of the array
26 src/GLIArchitectureTemplate.py:
27 removed redundant bind mounts
28
29 18 Dec 2005; Preston Cody <codeman@gentoo.org>
30 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
31 added a diagram by blackace from last night.
32 added the glossary in RTF format.
33
34 17 Dec 2005; Preston Cody <codeman@gentoo.org>
35 x86AT: separated out emerge/configure from running of bootloader
36 added MBR drive support to lilo.
37 these changes will likely not work.
38 AT: added setup_and_run_bootloader step.
39
40 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
41 src/net/server/gliserv.py:
42 call generated code in a function
43 src/net/server/html/webgli/*:
44 include top/bottom
45 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
46 src/GLIClientCongifuration.py:
47 install mode magic
48
49 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
50 src/GLIClientController.py:
51 use GLIException when there's an import problem
52 added debug code to show install_steps
53 src/templates/amd64ArchitectureTemplate.py:
54 add . to import path
55 proper path this time: ../../templates
56 src/GLIArchitectureTemplate.py:
57 add _portage_best_version() function
58
59 11 Dec 2005; Preston Cody <codeman@gentoo.org>
60 added initial glossary and gimli diagram to the docs directory.
61 modify gli-dialog to allow editing of the install_profile after loading XML.
62
63 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
64 src/net/server/html/webgli/:
65 converted globaluse, localuse, networkmounts, portagetree, and stageselection
66 moved saveclientconfig stuff into clientconfig
67 moved saveconfigfiles into config files
68 converted etc_portage and makedotconf
69 converted bootloader and kernel
70 convert daemons, extrapackages, networking, review, services, timezone, users
71 src/net/server/gliserv.py:
72 proper 404 handling for .pyhtml extension
73 HTML escape <% %> stuff
74 work around python's sucky regexes
75 src/GLIInstallProfile.py:
76 allow set_{rsync,ftp,http}_proxy() to accept empty values
77
78 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
79 src/net/server/gliserv.py:
80 initial commit of Legolas templating engine
81 302 redirects
82 src/net/server/html/index.html, src/net/server/webgli_template.html:
83 minor changes for new code
84 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
85 initial commit of the conversion from the monolithic WebGLIHandler.py to the
86 one file per path Legolas goodness
87 partitioning[2-4] done
88
89 5 Dec 2005; Preston Cody <codeman@gentoo.org>
90 webgli: dhcp options in CC and post-install.
91 updated comparison chart.
92 webgli: etc/portage/* and distcc support added. not too-well tested.
93
94 4 Dec 2005; Preston Cody <codeman@gentoo.org>
95 webgli_template.html: valign=top on left side.
96 webgli: fix bootloader boot_device. now working.
97 webgli: CC proxy done. post-install proxy in progress.
98
99 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
100 src/net/server/webgli_template.html:
101 increase padding for content cell to 7px and add colspan=2
102
103 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
104 webgli: added graphic bar on top
105 webgli: added hover effects on the links on the left
106 webgli: re-rendered header_bg.png to stretch without artifacts
107
108 3 Dec 2005; Preston Cody <codeman@gentoo.org>
109 webgli: make.conf disabling fixes for dynamic_stage3
110 fixed portage snapshot browse popup
111 all changes tested.
112 webgli: add debug mode to CC screen. the screen still needs lots of work.
113
114 1 Dec 2005; Preston Cody <codeman@gentoo.org>
115 added debug mode question to gli-dialog
116 added CC proxies to CC networking for gli-dialog
117 webgli: fixed skip CC networking if connection active
118 webgli: portage snapshot defaults to CD
119 webgli: bootloader mbr drive selection
120 webgli: USE flags unselectable if dynamic_stage3
121 webgli: manual extra packages and save button.
122
123 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
124 src/GLIUtility.py:
125 change ping count to 2
126 docs/comparison.html
127 initial commit
128
129 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
130 src/templates/x86ArchitectureTemplate.py:
131 fix map() issue with grub code
132 replace kernel_names and initrd_names loops with one-liners
133
134 27 Nov 2005; Preston Cody <codeman@gentoo.org>
135 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
136 initial gli-dialog support for recommended partitioning layout and clear.
137 failure cleanup now an option for gli-dialog.
138 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
139 added comparison list and updated TODO!
140
141 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
142 src/GLIArchitectureTemplate.py:
143 fix to stage1() debug code
144 fix to stage2() debug code
145
146 26 Nov 2005; Preston Cody <codeman@gentoo.org>
147 some more bootloader code fixes. forgot boot_device != mbr_device.
148
149 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
150 src/GLIStorageDevice.py:
151 fix to unallocated space merging when last one is after part 4
152
153 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
154 src/GLIArchitectureTemplate.py:
155 small fix to debugging code in copy_pkg_to_chroot()
156
157 23 Nov 2005; Preston Cody <codeman@gentoo.org>
158 more bugfixes with bootloader code
159 gli-dialog side appears to work
160
161 21 Nov 2005; Preston Cody <codeman@gentoo.org>
162 initial adding of boot_device to backend.
163 initial boot_device support added to gli-dialog.
164 some fixes of my poor coding
165
166 20 Nov 2005; Preston Cody <codeman@gentoo.org>
167 converted gli-dialog to use the install_package_list.
168 gtkfe has already been converted by AllanonJL
169 new way working in gli-dialog now and added to webgli.
170 added set/get_boot_device() to IP
171
172 19 Nov 2005; Preston Cody <codeman@gentoo.org>
173 get_install_package_list added to InstallProfile. This can be used by the FEs
174
175 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
176 src/templates/x86ArchitectureTemplate.py:
177 call ls with '-1 --color=no'
178
179 16 Nov 2005; Preston Cody <codeman@gentoo.org>
180 added warning (#9) to GRP ppl about stage3 tarballs
181
182 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
183 src/GLIArchitectureTemplate.py:
184 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
185 confused
186
187 13 Nov 2005; Preston Cody <codeman@gentoo.org>
188 removed protocols from rc.conf screens
189 finished initial rc.conf and make.conf in webgli
190
191 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
192 src/net/server/gliserv.py:
193 add -h option to usage()
194 show time and request URI in debug mode
195 show client IP in debug mode
196 just use IP instead of trying to do a reverse lookup
197
198 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
199 src/net/server/gliserv.py:
200 'classier' 401 message
201 proper commandline parsing
202 help via -h
203 user/pass can be specificed via commandline option
204
205 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
206 src/net/server/gliserv.py:
207 basic HTTP auth
208
209 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/net/server/gliserv.py:
211 dynamic module reloading (yipee!)
212 send 'Last-Modified' header for real files
213 respond to HEAD with just headers
214 src/net/server/handlers/WebGLIHandler.py:
215 icons for drives
216
217 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
218 src/net/server/handlers/WebGLIHandler.py:
219 initial 'pretty' partition table display support
220 clicking partition in 'pretty' display works instead of radio buttons
221 radio buttons and pretty display work together
222 META redirect instead of javascript
223 pretty display stretches across entire screen
224 'Recommended layout' and 'Clear drive' functions
225 properly catch exceptions from do_recommended()
226 src/GLIArchitectureTemplate.py:
227 replace preinst, copy, postinst, rm steps with qmerge
228 whoops...that shouldn't have been commented out
229 create image_dir with -p in copy_pkg_to_chroot()
230 more generic of symlink crappiness
231 new copy_pkg_to_chroot() actually works now
232
233 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
234 src/GLIStorageDevice.py:
235 initial generic disk support
236 fixes for add_partition() code
237 src/net/server/handlers/WebGLIHandler.py:
238 added support for creating generic disks
239 add new partition working
240 save and delete partitions
241
242 6 Nov 2005; Preston Cody <codeman@gentoo.org>
243 webgli: Partitioning making progress.
244
245 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
246 src/GLIArchitectureTemplate.py:
247 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
248 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
249 dir) and works around /etc/gconf symlink problem
250
251 5 Nov 2005; Preston Cody <codeman@gentoo.org>
252 webgli: lots of updates. preliminary partitioning. extra packages works.
253
254 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/net/server/gliserv.py:
256 httpd now supports HTTPS and falls back to HTTP if not available
257 make fallback actually work
258 src/net/server/SecureXMLRPCServer.py:
259 SecureSocketServer is now threaded
260
261 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
262 src/net/client/gliclient.py:
263 try to use HTTPS for XMLRPC first and fallback to HTTP
264 pretend mode
265 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
266 HTTPS XMLRPC goodness from samyron
267 pass name of certificate
268
269 31 Oct 2005; Preston Cody <codeman@gentoo.org>
270 wegli: daemons and services screens done.
271
272 30 Oct 2005; Preston Cody <codeman@gentoo.org>
273 webgli: networking and users screens
274 added return_redirect to handler.py
275 loading and saving install/client profiles works for webgli now
276 Review also done
277
278 *GLI-0.2 (27 Oct 2005)
279
280 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
281 src/templates/x86ArchitectureTemplate.py:
282 properly check for bootloader emerge exist status with exitsuccess()
283 log output of grub install command
284 add --batch --no-floppy to grub command
285 grubinstallstring only gets logged if debug is on
286 src/GLIUtility.py:
287 update progress bar to 100% when process finishes
288
289 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
290 src/GLIClientController.py:
291 added debugging code for the interaction between the 2 threads via Event()
292 src/GLIUtility.py:
293 doubled the buffer size in spawn()
294 bump buffer size up to 16384
295 only report progress in 5% increments
296 src/GLIArchitectureTemplate.py:
297 kernelpkgs.txt support code
298 above disabled because it sucks
299 added add_pkg_to_world()
300
301 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
302 src/GLIArchitectureTemplate.py:
303 use tar | tar to copy files in copy_pkg_to_chroot()
304 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
305
306 23 Oct 2005; Preston Cody <codeman@gentoo.org>
307 DEBUGGING ADDED TO AT. verbose field added to CConfig.
308
309 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
310 src/net/server/gliserv.py:
311 / maps to index.html
312 look for actual files in html/
313 src/net/html:
314 new template
315 src/GLIUtility.py:
316 added parse_vdb_contents()
317 src/GLIArchitectureTemplate.py:
318 added copy_pkg_to_chroot()
319 added debug code to dynamic-stage3
320 switch dynamic-stage3 to new method
321 lots of bug fixes from adding debug code
322
323 22 Oct 2005; Preston Cody <codeman@gentoo.org>
324 webgli initial bootloader support + changed make.conf.
325 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
326
327 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
328 src/GLIUtility.py:
329 horrible tangled mess of code that is tarball unpacking subprogress display
330 add unpack progress to portage snapshot
331 use read() instead of readlines() in spawn()
332 only update progress bar for whole percents
333
334 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
335 src/templates/x86ArchitectureTemplate.py:
336 change call to 'grub' to use GLIUtility.exitsuccess()
337 add definition of 'build_mode' in _configure_lilo()
338 src/misc/updategtkfe, src/misc/updateglid:
339 fix so subshell is called in root shell
340
341 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
342 src/net/server/handlers/WebGLIHandler.py:
343 stage screen launches URI browser in sized window with various properties set
344
345 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/misc/updategtkfe:
347 updated to actually work
348 remove previous snapshot and extracted dir before downloading
349 src/misc/updateglid:
350 updated to actually work
351 src/templates/x86ArchitectureTemplate.py:
352 fixed bug where grub code was looking for 'root+root+file_name2'
353
354 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
355 src/net/server/handlers/WebGLIHandler.py:
356 URI browser
357 added mirror selection
358 src/GLIUtility.py:
359 ls via ssh strips off ending *
360
361 16 Oct 2005; Preston Cody <codeman@gentoo.org>
362 more updates to webgli. stage selection.
363
364 11 Oct 2005; Preston Cody <codeman@gentoo.org>
365 updated webgli with preliminary Network Mounts support.
366
367 9 Oct 2005; Preston Cody <codeman@gentoo.org>
368 GenDialog: string formatting and yes/no label fixes.
369 added WebGLI template for gliserv.py
370 added WebGLIHandler as well as a definition for it in gliserv.py
371 updates to the webgli files even though they won't be there for long.
372 Utility: remove exception for non-existant grppkgs.txt until the new livecd
373 goes public.
374
375 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/net/server/gliserv.py:
377 override dict to not be so anal
378 main server now loads separate module to handle requests
379 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
380 split out profile URLs into separate handler function
381 move handlers into subdirectory
382 add Welcome and Clients handlers
383
384 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
385 src/GLIUtility.py:
386 raise exception if password prompt received twice
387
388 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
389 src/GLIUtility.py:
390 removed rot13ify()
391
392 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
393 src/net/server/gliserv.py:
394 allow for param to be passed multiple times in GET
395 no XMLRPC functions return None
396 modify POST request parsing to only create a list if needed
397 fix GET request parsing so the list creation for multiple values works
398 src/net/client/gliclient.py:
399 various typo and type mismatch fixes
400 exit after exception
401
402 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
403 src/net/client/gliclient.py:
404 initial commit
405 pass MAC to XMLRPC functions
406 src/net/server/GLIServerProfile.py:
407 rename GLIClientsProfiles to GLIServerProfile
408
409 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/server/gliserv.py:
411 now handles POST requests
412 move majority of request handling code to common_handler() to reduce code
413 duplication
414 profile loading
415 client reg via XMLRPC goes into SharedInfo()
416 /showclients redesign
417 template fixes
418 allow handler functions to add/change headers
419 save profile
420
421 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/net/server/GLIClientsProfiles.py:
423 initial commit
424 src/net/server/template.html:
425 initial commit
426 src/net/server/gliserv.py:
427 add template mojo
428
429 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
430 src/net/server/gliserv.py:
431 XMLRPC mojo
432
433 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
434 src/GLIArchitectureTemplate.py:
435 add code in _edit_config() to comment line where variable is defined
436 previously
437 insert new line under previous definition of variable if it exists
438 small _edit_config() cleanup
439 src/GLIStorageDevice.py:
440 add clear_partitions() function
441 new sizes for recommended partition layout
442 automatically calculate swap size for recommended layout
443
444 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
445 src/templates/x86ArchitectureTemplate.py:
446 fat16 mojo
447
448 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
449 src/GLIStorageDevice.py:
450 prevent do_recommended() from being run twice
451 rewrite do_recommended() to be more robust
452 src/GLIArchitectureTemplate.py:
453 rework _edit_config() to not write duplicate entries
454
455 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
456 src/GLIStorageDevice.py:
457 added do_recommended() function to automatically created 256M/1G/* layout
458
459 17 Sep 2005; Preston Cody <codeman@gentoo.org>
460 src/gli-dialog.py: added set_distcc to the list
461 GenDialog: added set_distcc. untested.
462 IP: added install_distcc flag.
463 AT: added install_distcc function based on the flag. runs after build_kernel
464 changed AT spawn command for distcc for nodeps.
465
466 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
467 src/GLIUtility.py:
468 add rot13ify() function
469
470 16 Sep 2005; Preston Cody <codeman@gentoo.org>
471 src/GenDialog.py
472 added a sentence of text. unchecking support added.
473
474 15 Sep 2005; Preston Cody <codeman@gentoo.org>
475 src/GLIUtility.py
476 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
477 src/GenDialog.py
478 still working on extra_packages. transformed the list to new format.
479 added GRP indication to list. untested.
480 TODO lists updated.
481 src/fe/dialog/gli-dialog.py
482 spelling mistook.
483
484 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
485 src/GLIUtility.py:
486 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
487
488 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
489 src/GLIUtility.py:
490 add get_directory_listing_from_uri()
491 add http support to above
492 add ftp support to above
493 add scp support to above
494 src/GLIArchitectureTemplate.py:
495 "0" instead of 0 for key of single-element dict passed to _edit_config()
496
497 5 Sep 2005; Preston Cody <codeman@gentoo.org>
498 value_only -> only_value
499
500 3 Sep 2005; Preston Cody <codeman@gentoo.org>
501 gutted out all of etc_portage structure since it is now all handled by
502 etc_files
503
504 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
505 src/GLIArchitectureTemplate.py:
506 install_packages() sends progress update notifications
507 src/templates/x86ArchitectureTemplate.py:
508 increase sleep to 5s between format tries
509 src/GLIClientController.py:
510 pass 'self' to AT instead of 'self._pretend'
511
512 2 Sep 2005; Preston Cody <codeman@gentoo.org>
513 logger -> logger.log in x86AT
514
515 1 Sep 2005; Preston Cody <codeman@gentoo.org>
516 added set_etc_portage to IP. debugging gli-d's support for it.
517
518 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
519 src/templates/x86ArchitectureTemplate.py:
520 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
521
522 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
523 src/GLIArchitectureTemplate.py:
524 add _portage_best_version() function and rework install_packages() to allow
525 for future X of Y tracking
526 Use best_visible instead of best_version
527 tracked down and fixed missing = causing empty install extra packages
528 use = when emerging also
529 quickpkg hokey pokey
530 run _get_packages_to_emerge() again with -pk
531
532 22 Aug 2005; Preston Cody <codeman@gentoo.org>
533 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
534 the end of install_packages.
535 added updateglid to /src/misc
536 updated all core files with new GPL notice and copyright statement.
537
538 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
539 src/GLIUtility.py:
540 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
541 a snapshot in /mnt/cdrom/snapshots/
542 get_snapshot_from_cd() adds file:// at the beginning
543 change calls to extra package special case functions to 'self.blah'
544
545 21 Aug 2005; Preston Cody <codeman@gentoo.org>
546 src/ArchTemplate: changed "voodoo".
547 changed order of portage sync methods. made a fallback to webrsync if
548 normal emerge sync fails.
549 removed get_sources_from_cd because it is obsolete.
550 add special cases to install_packages. remove fatal exception on package
551 install failure b/c the box will still be bootable.
552 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
553 handled in the FEs.
554 src/GenDialog: added a bunch of code for dealing with x11-based packages.
555 awaiting testing.
556
557 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
558 src/GLIStorageDevice.py:
559 global try/except block around fs resizable detection code
560 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
561 install-failed cleanup function
562
563 18 Aug 2005; Preston Cody <codeman@gentoo.org>
564 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
565
566 16 Aug 2005; Preston Cody <codeman@gentoo.org>
567 GLIGenDialog:
568 add drive choices for loaded configs.
569 force snapshot for dynamic_stage3
570 init the snapshoturi input to the cd snapshot if not already selected.
571 if dynamic_stage3, skip the make.conf step.
572 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
573 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
574
575 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
576 src/GLIArchitectureTemplate.py:
577 manually call MAKEDEV in stage3-dynamic code
578 copy /etc/inittab.old to /etc/inittab in chroot
579 src/GLIUtility.py:
580 add beginning of validate_uri() function
581 add file:/// support to validate_uri()
582 single quotes when setting livecd password
583
584 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
585 src/GLIGenDialog.py:
586 change getmountpoint() to get_mountpoint()
587 src/misc/updategtkfe:
588 committed script to automatically download latest snapshot and run gtkfe
589 src/templates/x86ArchitectureTemplate.py:
590 fix _configure_lilo_add_windows() for IP -> GLISD stuff
591 src/GLIArchitectureTemplate.py:
592 give tmp_minor an initial value in mount_local_partitions so that the value
593 remain from the previous drive
594
595 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
596 src/templates/x86ArchitectureTemplate.py:
597 Fix _configure_lilo() for IP using GLISD stuff
598 src/GLIArchitectureTemplate.py:
599 install_cron_daemon() treats "none" specially
600
601 14 Aug 2005; Preston Cody <codeman@gentoo.org>
602 old patch from Steven Mertens to resolve bug #96642
603 numerous asthetic changes to GenDialog, no real functionality changes though.
604 strings renamed for global use if necessary.
605 fix all three parts of bug 102291
606 disable set_etc_portage until fully-written.
607
608 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
609 src/GLIClientController.py:
610 lower-case http/ftp proxy envvars
611
612 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/GLIClientController.py:
614 log end of pre_install steps to aid in debugging
615 src/templates/x86ArchitectureTemplate.py:
616 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
617
618 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
619 src/GLIArchitectureTemplate.py
620 check to make sure that the device node we're wait for to exist isn't of
621 type 'free'
622
623 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
624 src/GLIGenDialog.py:
625 convert install_packages to list in set_extra_packages()
626 check return code of checklist() call in "Manual" section
627 *actually* fix the first problem
628
629 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
630 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
631 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
632
633 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/GLIArchitectureTemplate.py:
635 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
636
637 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
638 Add CDATA support to SimpleXMLParser and add utility functions for it.
639
640 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
641 src/GLIArchitectureTemplate.py:
642 Fix case where vixie-cron is specified as a full package atom, as we still
643 don't want to run 'crontab /etc/crontab' for it.
644
645 *GLI-0.1 (3 Aug 2005)
646
647 30 Jul 2005; Preston Cody <codeman@gentoo.org>
648 add scp to list of is_uri() so GenDialog doesn't complain.
649 fixed livecd-kernel bug in bootloader code.
650 fixed gendialog for dynamic_stage3 instead of "networkless"
651 change bootloader to allow for both initrd and initramfs.
652 fix IP for dynamic_stage3.
653 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
654
655 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
656 Added full scp:// URI support to get_uri() in GLIUtility
657 Remove "networkless" from dynamic stage3 if locic.
658 Remove print statement from scp:// code.
659 Change scp code to check for "assword: " instead of "Password:"
660 Fix post-install network code to create net.eth1+ symlink correctly
661 Check to make sure pkg can be split on / and some debugging code
662 Add 2>dev/null to emerge call in _get_packages_to_emerge()
663 SimpleXMLParser handles True/False/None correctly now
664 Comment out above fix
665 Add partitioning wait-for-device-to-exist code to mount_local_partitions
666
667 28 Jul 2005; Scott Myron <samyron@gentoo.org>
668 Removed a FIXME in the GLIClientConfiguration that is no
669 longer needed.
670
671 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
672 Default to x86 in ClientConfig
673 Typo in build-a-stage3 code.
674 Remove MAKEDEV call in build-a-stage3 postscript.
675
676 26 Jul 2005; Preston Cody <codeman@gentoo.org>
677 Rewrote init of IP for gli-d. Other GenDialog updates.
678 allow network_type to be None in CConfig.
679
680 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
681 Add _dynamic_stage3 option to IP.
682 Add check for that option to dynamic stage3 code in ArchTemplate.
683 Fix code to determine default route in get_eth_info() in GLIUtility.
684 Fix serialization of dns-servers in ClientConfig.
685
686 24 Jul 2005; Preston Cody <codeman@gentoo.org>
687 changed default values of cron/logger in IP.
688 moved GenDialog IP init out to the individual files. gli-dialog's version
689 will change quite a bit.
690
691 22 Jul 2005; Preston Cody <codeman@gentoo.org>
692 added ppcArchTemplate. blank now. working on yaboot.
693 modified ArchTemplate for amd64 and ppc custom kernels.
694 skeleton implementation of _configure_yaboot.
695 small fixes to other templates.
696
697 21 Jul 2005; Preston Cody <codeman@gentoo.org>
698 GenDialog updates. changed comment in IP.
699
700 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
701 src/GLIInstallProfile.py:
702 Fix codeman's screwup of changing the service seperator to ',' in the parser
703 without changing it in the serialization code! Also document this in a
704 comment so you find it easier. Everybody needs to make sure they update
705 their install profiles!
706
707 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
708 src/GLIArchitectureTemplate.py:
709 Fix casting of list to string and concat of None with string, as well as
710 commented prototype of checking that mounting actually worked (found a case
711 where mount can return success, but the mount won't be done).
712
713 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
714 src/templates/x86ArchitectureTemplate.py:
715 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
716 checking for the device, and sleeping 1 second each time.
717
718 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
719 src/templates/x86ArchitectureTemplate.py:
720 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
721 bootloader works again. Also rename _install_{grub,lilo} to
722 _configure_{grub,lilo} since they don't install the loaders anymore
723 themselves.
724
725 7 Jul 2005; Preston Cody <codeman@gentoo.org>
726 fix global USE flags to not include the arch types at the end.
727 updates to GenDialog and gli-d.
728
729 6 Jul 2005; Preston Cody <codeman@gentoo.org>
730 fixing bootloader code for no initrd and initrd->initramfs naming change.
731
732 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
733 Proper comments and parameters to GLIException in install_mta()
734 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
735 Add strip() to list_mirrors(), list_subarch_from_mirror() and
736 list_tarball_from_mirror() to eliminate blank last item.
737
738 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
739 Added stage3 generation code.
740
741 5 Jul 2005; Preston Cody <codeman@gentoo.org>
742 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
743 Mild changes to GenDialog.
744
745 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
746 Remove separate install step configure_rc_conf() since it's handled by
747 update_config_files()
748 Make a copy of newvalues in _edit_config() so quotes aren't added when the
749 function is called twice on the same file.
750
751 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
752 Missing \ in sed in _get_packages_to_emerge()
753 Removed explicit emerging of hotplug and no longer add it to the runlevel.
754 Check in _quickpkg_deps() to ignore blank package names returned from
755 _get_packages_to_emerge()
756
757 28 Jun 2005; Preston Cody <codeman@gentoo.org>
758 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
759 in the dialog.py gauge code.
760
761 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
762 Add code to update_config_files() to go through etc_files and update stuff.
763 Check to see that _etc_files['make.conf'] exists in get_make_conf()
764 Only use float() in partition xml parsing code if type == "free"
765
766 28 Jun 2005; Preston Cody <codeman@gentoo.org>
767 finished almost all internationalization of GenDialog.
768 attempt at fixing rc.conf function. moved 3 generate functions out of
769 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
770 added dialog.py to the fe/dialog directory so it actually gets used.
771
772 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
773 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
774
775 27 Jun 2005; Preston Cody <codeman@gentoo.org>
776 fix extra entry in list_mirrors()
777 beginning internationalization runthrough.
778
779 26 Jun 2005; Preston Cody <codeman@gentoo.org>
780 added dialog.py to /src temporarily until it gets accepted upstream.
781 fix for unused value in form in dialog.py and changed heights.
782 fix GenDialog forms.
783
784 25 Jun 2005; Preston Cody <codeman@gentoo.org>
785 Changed hostname/domainname for new baselayout.
786 Changed _add_to_runlevel errors to logs.
787 Updated TODO list to show status of GenDialog
788 More updates to GenDialog including two checklists that probably won't work.
789 update IP to use comma-separated list instead of space separated for services.
790
791 24 Jun 2005; Preston Cody <codeman@gentoo.org>
792 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
793 GenDialog as it gets closer to completion.
794
795 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
796 Modify get_eth_info() to take a full interface name (eth0 fex). float()
797 instead of int() in add_partition_device_partition() for minor (closes 96804)
798
799 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
800 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
801 instead of 'interfaces[interface][1]' since DHCP uses that field for its
802 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
803
804 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
805 Apply spawn() patch from #96644 (with minor changes). Make sure the return
806 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
807 small error with <pipe>.close() returning None. Fix space vs. tab issue.
808 Fix undefined variable 'output' issue in spawn().
809
810 20 Jun 2005; Preston Cody <codeman@gentoo.org>
811 More updates to GenDialog and gli-d.
812
813 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
814 Modify list_mirrors() to return a list of mirror URL/name pairs.
815
816 19 Jun 2005; Preston Cody <codeman@gentoo.org>
817 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
818 get subarch.
819
820 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
821 Backend partitioning will create disklabel is none exists. Installprofile
822 defaults to "" now instead of "msdos" for disklabel type. Fix for
823 mount_local_partitions() to remember device along with minor in the
824 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
825 add else block to log unsupported netmount types to mount_network_shares()
826
827 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
828 src/GLIArchitectureTemplate.py:
829 Refactor kernel_compile common stuff, fix 2.4 build process.
830 src/fe/cli/clife.py:
831 Logging system.
832 src/GLIUtility.py, src/GLIStorageDevice.py:
833 Add comments about re-writes needed for boxes without sysfs.
834
835 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
836 src/GLIArchitectureTemplate.py:
837 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
838 'make dep' call for custom compile. build_mode support for prepare-only and
839 none types completed. custom compile function chains shell functions in
840 spawned script, to allow for catching all errors.
841
842 15 Jun 2005; Preston Cody <codeman@gentoo.org>
843 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
844 and GenDialog. other gendialog updates as well. kernel updates untested.
845
846 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
847 src/GLIInstallProfile.py:
848 Change structure of etc-portage stuff. The serialization was broken before my
849 last commit, and I am the only person that's ever used it. The new schema is
850 as follows:
851 <etc-portage>
852 <file name="package.mask"/>
853 <file name="package.unmask">
854 <entry atom="sys-kernel/openmosix-sources"/>
855 </file>
856 <file name="package.use">
857 <entry atom="sys-libs/db">
858 -java
859 </entry>
860 <entry atom="dev-libs/cyrus-sasl">
861 -ldap
862 </entry>
863 </file>
864 </etc-portage>
865
866
867 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
868 src/GLIInstallProfile.py:
869 Add new entry for gli-profile/kernel-build-method item. Add missing
870 serialize_etc_portage (temporary). Make serialize_make_conf always print the
871 keys in the same order.
872
873 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
874 src/GLIArchitectureTemplate.py:
875 Clean up commenting used by _edit_config(), and fix bug where wrong comment
876 was repeatedly appended to make.conf.
877
878 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
879 src/GLIArchitectureTemplate.py:
880 Put some Linux-2.6 specific code under a if statement. Store list of
881 successfully mounted swap device for using swapoff. Add proper error checking
882 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
883 'file'. Clean up some redundant code (thanks to pychecker).'
884
885 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
886 Fix typos: get_extended() instead of get_extended_partition(). Added
887 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
888 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
889
890 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
891 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
892 in add_network_interface.
893
894 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
895 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
896 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
897 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
898 prepare_chroot.
899
900 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
901 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
902 +src/fe/installer-gtk:
903 Add new automated CLI frontend. Add scripts that are the intended means to
904 use each frontend.
905
906 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
907 src/GLIClientController.py:
908 Add null type to network config, for cases where the interface is already up
909 and should not be touched (netboot for example).
910
911 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
912 src/GLIArchitectureTemplate.py:
913 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
914 string!. Try to use binary packages if available by default.
915
916 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
917 src/GLIArchitectureTemplate.py:
918 More error checking for _add_to_runlevel, to ensure that the init script
919 actually exists before we try to add it. set_services phase must take place
920 after the package installation, otherwise the init scripts might not exist.
921 Find the correct init script for the cron and logging daemons, and add that
922 instead of the package atom.
923
924 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
925 src/GLIArchitectureTemplate.py:
926 Fix up _edit_config so that it works if the file doesn't already exist. Fix
927 usage of 'file' to 'contents' for the variable name, as it shadows
928 __builtin__.file.
929
930 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
931 src/GLIArchitectureTemplate.py:
932 Add MTA install code, and include MTA install phase. Ensure
933 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
934 for 'none' kernel config for build_kernel phase. Put kernel_script in
935 /var/tmp instead of /root for build_kernel phase.
936
937 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
938 Rename mta variables to match syslog/cron variables.
939
940 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
941 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
942 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
943 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
944 src/templates/.cvsignore, src/tests/.cvsignore:
945 Refactor partition formatting again to include error checking. Allow 'none'
946 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
947
948 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
949 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
950 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
951 only have a single spawn call.
952
953 11 Jun 2005; Preston Cody <codeman@gentoo.org>
954 refixed samyron's fix of set_architecture_template.
955
956 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
957 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
958 be executable.
959
960 10 Jun 2005; Scott Myron <samyron@gentoo.org>
961 Fixed one of the FIXME's in the ClientConfiguration. There is now some
962 error checking when you call set_architecture_template.
963
964 10 Jun 2005; Preston Cody <codeman@gentoo.org>
965 moved the mkfsopts input to the partition options menu instead of the during
966 the creation process. updated GenDialog to say it supports reiserfs v3.
967
968 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
969 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
970 Complete support for 'mkfsopts' parameter in main system and dialogfe.
971 Add support for other partition types to dialogfe.
972 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
973 avoid integer overflows and wraparounds.
974
975 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
976 Removed start/end from XML output and added mkfsopts to partitioning info.
977 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
978 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
979 in GLIClientConfiguration. Change from .1 and .9 to constants for
980 partitioning. Fix free space overwriting bug. Remove a few unused functions
981 from rewrite. Fix call to get_partition_at()
982
983 8 Jun 2005; Preston Cody <codeman@gentoo.org>
984 Updates to GenDialog and dialogfe.
985
986 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
987 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
988
989 6 Jun 2005; Preston Cody <codeman@gentoo.org>
990 more GenDialog updates to partitioning.
991
992 5 Jun 2005; Preston Cody <codeman@gentoo.org>
993 Indenting issue in GLISD/get_ordered_partition_list.
994 updates to GenDialog partitioning and added default UTC for timezone in IP.
995
996 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Added GLISD.get_model()
998
999 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1000 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1001 More updates to GenDialog :)
1002
1003 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1004 Added get_interface_realname() function.
1005
1006 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1007 Added auto-save of CConfig and copying to new /root after install.
1008 yet even more GenDialog updates.
1009
1010 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1011 removed print statement from GLISD. more updates to GenDialog.
1012
1013 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1014 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1015 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1016 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1017 places in GLIClientConfiguration.
1018
1019 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1020 Fix mount_local_partitions(), configure_fstab(), and
1021 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1022 A few more fixes for templates/x86Archtemplate
1023
1024 27 May 2005; Preston Cody <codeman@gentoo.org>
1025 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1026 a work in progress.
1027
1028 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1029 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1030 directly. GLISD can now handle data imported from XML.
1031
1032 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1033 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1034 handle blank (no disklabel) disks.
1035
1036 20 May 2005; Preston Cody <codeman@gentoo.org>
1037 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1038 up, documented, and separated out serialization and grouped all sections.
1039
1040 19 May 2005; Preston Cody <codeman@gentoo.org>
1041 Reorganization of ClientConfiguration and gutting of unused functions.
1042 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1043
1044 18 May 2005; Preston Cody <codeman@gentoo.org>
1045 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1046
1047 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1048 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1049 partitioning. CC serializes install profile to disk and prepare_chroot()
1050 copies it into /mnt/gentoo/root
1051
1052 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1053 Moved URI parsing into new function parse_uri()
1054
1055 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1056 Added XMLParser module.
1057
1058 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1059 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1060 Minor fix to is_uri() regex to allow hyphens in hostname.
1061
1062 12 May 2005; Preston Cody <codeman@gentoo.org>
1063 Updated finishing_cleanup for new unmounting method from agaffney.
1064
1065 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1066 Fix GLILogger to use correct time format string. Fix _edit_config() to
1067 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1068 unicode support to is_realstring().
1069
1070 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1072 return value instead of non-zero. Add code to output a traceback to the
1073 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1074 instead of --nocolor.
1075
1076 10 May 2005; Preston Cody <codeman@gentoo.org>
1077 Added GLIGenDialog.py to make a generic class for the dialog functions that
1078 can be used by both dialogfe and the netfe/be. updated both for new filename.
1079 date changes. 2004->2005.
1080
1081 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1082 Removed 'quiet=True' from spawn() calls
1083
1084 10 May 2005; Preston Cody <codeman@gentoo.org>
1085 Updated GLIUtility with patches from chotchki. Also added documentation
1086
1087 9 May 2005; Preston Cody <codeman@gentoo.org>
1088 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1089 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1090 from bug #89683, mostly touchups.
1091
1092 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1093 GLIStorageDevice cleanup patch from bug #91761
1094
1095 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1096 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1097 _edit_config(). Error logging casts 'error' to str
1098
1099 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100 Exceptions received in CC are logged before being passed to the FE. Added
1101 code to CC to handle exceptions *not* thrown by the installer itself.
1102
1103 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1104 get_max_mb_for_resize() returns -1 if not self.resizeable
1105
1106 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1107 More dirty rsync hacks :-/
1108
1109 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1110 Patches from chotchki (bug #90325) to improve CC networking. untested.
1111
1112 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1113 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1114 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1115 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1116 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1117 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1118 _get_packages_to_emerge()
1119
1120 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1121 Added group-adding code to set_users in ArchTemplate
1122
1123 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1124 Added post-install script code
1125
1126 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1127 Fixed encapsulation issues in GLIClientController (bug #90141)
1128
1129 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1130 Update resizing code in GLIStorageDevice
1131
1132 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1133 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1134
1135 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1136 Reverted change to ArchTemplate and added support for commented line in old
1137 code.
1138
1139 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1140 Changed _edit_config() to modify value in-place instead of commenting out and
1141 adding the new value to the end of the file.
1142
1143 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1144 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1145 Also updated TODO list.
1146
1147 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1148 Use blackace's one-liner to add comments for all function for use with
1149 pythondoc.
1150
1151 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1152 Moved 'end >= device_sectors' check out of loop to check for next partition's
1153 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1154 Partitioning code now tracks start/end of extended for placing logicals. End
1155 point of logical is now adjusted along with start.
1156
1157 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1158 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1159 the way of partitioning from a blank disk. Add int() around access to minor
1160 key in partition information due to new partition code leaving them as float.
1161
1162 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1163 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1164
1165 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1166 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1167
1168 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1169 Added support for DHCP options and MAC addresses in the InstallProfile.
1170
1171 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1173 sed to properly strip out junk.
1174
1175 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1176 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1177 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1178
1179 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1180 Fixed indent problem in GLICController
1181
1182 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1183 Check for disklabel type "loop" and use the device name without a minor.
1184
1185 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1186 Remove /tmp/compile_output.log and /var/log/install.log when install is
1187 complete. Added code to (hopefully) keep 2nd thread running after install.
1188 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1189 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1190 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1191
1192 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1194 when unpacking tarball.
1195
1196 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1197 rewrote filesystem_tools. looks like it works so ripping out all the old
1198 filesystem_tools code.
1199
1200 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1201 Changed the print statements to logging in the partitioning BE code.
1202 the logger may need to be imported to the x86archtemplate. unknown yet.
1203 Added the finishing_cleanup function.
1204 added a fix to the logger from BenUrban
1205
1206 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1207 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1208 URIs. The blank uri check has been commented out.
1209 ripped out error checking of set_services. this is done by _add_to_runlevel.
1210
1211 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1212 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1213
1214 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1215 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1216 the install profile if available. Commented out spawn() debugging prints
1217
1218 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1219 small changes to setup_network_post. moved adding to runlevel of net.x to
1220 after the device gets symlinked. added domainname runlevel command.
1221
1222 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1223 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1224 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1225 spawn() call in livecd-kernel code to pass environment variables.
1226 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1227 the install profile if available.
1228
1229 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1231 to handle installing the livecd kernel into the new system.
1232
1233 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1234 should emerge hotplug and coldplug before adding them to runlevel.
1235
1236 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1237 took chroot out of grub_install command.
1238
1239 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1240 Changed chroot wrapper code in spawn() to write the wrapper the python way
1241 instead of the bash way to avoid quote conflicts. Added
1242 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1243 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1244 as it breaks the piping.
1245
1246 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1247 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1248
1249 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1250 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1251 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1252 GLIInstallProfile.
1253
1254 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1255 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1256 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1257 into /mnt/gentoo in prepare_chroot()
1258
1259 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1261 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1262 to start/end sectors
1263
1264 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1265 Add 2>&1 to cmd in spawn()
1266
1267 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1268 Modified GLIUtility.exitsuccess() to work with return value from
1269 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1270 creates wrapper script for commands run inside chroot so multiple commands
1271 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1272 for the generated script from spawn()
1273
1274 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1275 Removed default values for stage tarball URI and portage tree URI from
1276 InstallProfile. These should be set by the FEs. also added services step to
1277 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1278 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1279
1280 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1281 Small fix for setting the default gateway. Also added feature to dialogfe.
1282
1283 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1285
1286 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1287 Fixed a bunch of true -> True typos. lots of em
1288 only write new resolv.conf if there are dns servers listed.
1289
1290 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Commented out 'display_on_tty8=True' in start_portmap()
1292
1293 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1294 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1295
1296 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1297 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1298 lang parameter to __init__()
1299
1300 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1301 updates to TODO list.
1302
1303 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Initial code for quickpkg GRP support. Fix loop to grab packages from
1305 'emerge -p blah'
1306
1307 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1308 check for dhcp in the network stuff and emerge it if it is.
1309 added quickpkg to TODO list
1310
1311 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1312 Changed the raising of 'warning' exceptions to a simple log of the error
1313 so that the installer can continue.
1314
1315 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1316 Some big changes. First, changed most output to display_on_tty8.
1317 Second, added log lines to all templates. Some smaller fixes such as typos.
1318 Also did some cleanups of old commented lines.
1319
1320 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1322 Undo change with fix. Escaping fix in GLIStorageDevice.py
1323
1324 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1325 more updates to TODO list. hopefully we'll soon start removing items instead
1326 of adding them.
1327
1328 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1330
1331 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1332 updated TODO list. (again)
1333
1334 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1335 changed output of portmap start to display_on_tty8.
1336 fixed bootloader for udev and multiple kernels
1337 fixed custom kernel config (again)
1338
1339 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1340 changed default value of CC._enable_ssh to True because this is smart.
1341 added code to allow custom kernel .config. may be unstable and break. sorry.
1342
1343 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1344 partition() now waits until after it checks for partition flags before delete
1345 the partitions :P
1346
1347 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1349 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1350 blank.
1351
1352 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1353 Various fixes related to the add_users function. Still not yet finished.
1354 Added things to the TODO list. Lets start using that!
1355
1356 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 Added code to x86Template to format newly created partitions. Also added
1358 some error checking code. GLIStorageDevice passes 'minor' with data to
1359 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1360 mounting code.
1361
1362 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1363 Took out unnecessary setting of random livecd root password. the cd already
1364 sets it randomly.
1365
1366 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1367 Took out an unneeded step from CC's run()
1368
1369 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1370 Attempt at detecting and adding windows partitions to lilo.
1371
1372 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1373 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1374 partition. fixed misc exit_status => exitstatus typo.
1375
1376 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1377 Added basic code for resizing filesystems with pyparted. Fixed code for
1378 resizing ntfs and ext2/3.
1379
1380 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 Fixed partition() in x86Template so that it scans through logicals and deletes
1382 before deleting containing extended partition. Also clears partition table to
1383 be safe before third pass.
1384
1385 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1386 Added mount_network_shares. not able to test it from this computer.
1387 will test when i get back to school.
1388 also added start_portmap to the client_controller as an always-do.
1389 agaffney says this is needed for NFS mounts to work.
1390
1391 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1392 Partial rewrite of partitioning code in x86Template. No longer shells out to
1393 parted to perform actions, now uses all pyparted calls. Code "works" in a
1394 test, but still needs lots of TLC. Also modified tests/install.py to work
1395 with x86Template and GLIClientConfiguration.
1396
1397 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Initial move of partitioning code from ArchTemplate to x86Template.
1399
1400 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1401 Added grp_install and services to InstallProfile. forgot about the set_root_password
1402
1403 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1404 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1405 Test Install ran very well (skipping partitioning).
1406
1407 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1408 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1409 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1410 some may still have eluded me.
1411
1412 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1413 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1414 Just finished mount_local_partitions in GLIArchitectureTemplate
1415
1416 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1417 Added get_num_sectors() to GLIStorageDevice.
1418
1419 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1420 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1421 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1422 from GLIInstallProfile.
1423
1424 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1425 GLIStorageDevice returns "unknown" instead of "" for get_type()
1426
1427 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1428 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1429 actually work. Commented out resizability checking code for speed.
1430
1431 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1432 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1433 GLIStorageDevice at the suggestion of plors
1434
1435 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1436 Added a function to GLIUtility to pull a value from a make.conf-style config
1437 file. Minor type fix to GLIInstallProfile.py
1438
1439 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1440 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1441 network mounts from partition data structure in GLIInstallProfile
1442
1443 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1444 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1445 can be resized.
1446
1447 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1448 Added some of the final functions to GLIInstallTemplate.
1449 Yes this project is still active despite rare use of the Changelog!
1450
1451 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1452 Added the GLIPartitionTools.py file. This is a temporary insertion of
1453 partitioning tools that will eventually go into their own package.
1454
1455 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1456 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1457 for the program). Added __init__(install_profile, client_configuration) to
1458 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1459 to avoid constantly passing stuff every time we call a method.
1460
1461 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1462
1463 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1464 files without messing up all the other stuff in them. This will be used for making
1465 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1466
1467 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1468
1469 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1470 have a few basic things. I added two private methods. One is _depends(). This
1471 will be used for dependency checking (ie. unpacking a tarball requires that
1472 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1473 same syntax as os.system(), however, instead of being run in the liveCD
1474 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1475 isolated the code. Hope to work more this week to get this class formed...
1476
1477 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1478
1479 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1480 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1481 to allow for easier modification (mutable, rather than immutable objects). Updated
1482 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1483 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1484 Added initial unit test code.
1485
1486 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1487
1488 Added initial changelog. Setting up the basic structure of the CVS repository
1489 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1490 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20