/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1185 - (show annotations) (download)
Sun Dec 25 05:06:35 2005 UTC (8 years, 6 months ago) by agaffney
File size: 62842 byte(s)
remove calls to portage module

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.545 2005/12/25 05:06:35 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 use separate script for GRP deps
11 remove calls to portage module
12 src/runtimedeps.py:
13 initial commit
14
15 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
16 src/GLIPortage.py:
17 initial commit
18 move some of portage function from GLIAT
19 flipped around a few function args
20 src/GLIArchitectureTemplate.py:
21 revamp install_packages() for new GLIPortage
22
23 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIArchitectureTemplate.py:
25 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
26
27 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
28 src/net/server/gliserv.py:
29 wrap generated code in a class to isolate it a bit better
30 302 redirects work
31 don't use cgi.escape() for <% %>
32 src/net/server/html/webgli/*:
33 load/save profile
34 src/GLIUtility.py:
35 change /sbin/lspci to just lspci
36
37 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
38 src/GLIClientController.py:
39 change ordering of statements in CC run() while loop to not go past the end
40 of the array
41 src/GLIArchitectureTemplate.py:
42 removed redundant bind mounts
43
44 18 Dec 2005; Preston Cody <codeman@gentoo.org>
45 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
46 added a diagram by blackace from last night.
47 added the glossary in RTF format.
48
49 17 Dec 2005; Preston Cody <codeman@gentoo.org>
50 x86AT: separated out emerge/configure from running of bootloader
51 added MBR drive support to lilo.
52 these changes will likely not work.
53 AT: added setup_and_run_bootloader step.
54
55 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
56 src/net/server/gliserv.py:
57 call generated code in a function
58 src/net/server/html/webgli/*:
59 include top/bottom
60 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
61 src/GLIClientCongifuration.py:
62 install mode magic
63
64 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIClientController.py:
66 use GLIException when there's an import problem
67 added debug code to show install_steps
68 src/templates/amd64ArchitectureTemplate.py:
69 add . to import path
70 proper path this time: ../../templates
71 src/GLIArchitectureTemplate.py:
72 add _portage_best_version() function
73
74 11 Dec 2005; Preston Cody <codeman@gentoo.org>
75 added initial glossary and gimli diagram to the docs directory.
76 modify gli-dialog to allow editing of the install_profile after loading XML.
77
78 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
79 src/net/server/html/webgli/:
80 converted globaluse, localuse, networkmounts, portagetree, and stageselection
81 moved saveclientconfig stuff into clientconfig
82 moved saveconfigfiles into config files
83 converted etc_portage and makedotconf
84 converted bootloader and kernel
85 convert daemons, extrapackages, networking, review, services, timezone, users
86 src/net/server/gliserv.py:
87 proper 404 handling for .pyhtml extension
88 HTML escape <% %> stuff
89 work around python's sucky regexes
90 src/GLIInstallProfile.py:
91 allow set_{rsync,ftp,http}_proxy() to accept empty values
92
93 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
94 src/net/server/gliserv.py:
95 initial commit of Legolas templating engine
96 302 redirects
97 src/net/server/html/index.html, src/net/server/webgli_template.html:
98 minor changes for new code
99 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
100 initial commit of the conversion from the monolithic WebGLIHandler.py to the
101 one file per path Legolas goodness
102 partitioning[2-4] done
103
104 5 Dec 2005; Preston Cody <codeman@gentoo.org>
105 webgli: dhcp options in CC and post-install.
106 updated comparison chart.
107 webgli: etc/portage/* and distcc support added. not too-well tested.
108
109 4 Dec 2005; Preston Cody <codeman@gentoo.org>
110 webgli_template.html: valign=top on left side.
111 webgli: fix bootloader boot_device. now working.
112 webgli: CC proxy done. post-install proxy in progress.
113
114 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
115 src/net/server/webgli_template.html:
116 increase padding for content cell to 7px and add colspan=2
117
118 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
119 webgli: added graphic bar on top
120 webgli: added hover effects on the links on the left
121 webgli: re-rendered header_bg.png to stretch without artifacts
122
123 3 Dec 2005; Preston Cody <codeman@gentoo.org>
124 webgli: make.conf disabling fixes for dynamic_stage3
125 fixed portage snapshot browse popup
126 all changes tested.
127 webgli: add debug mode to CC screen. the screen still needs lots of work.
128
129 1 Dec 2005; Preston Cody <codeman@gentoo.org>
130 added debug mode question to gli-dialog
131 added CC proxies to CC networking for gli-dialog
132 webgli: fixed skip CC networking if connection active
133 webgli: portage snapshot defaults to CD
134 webgli: bootloader mbr drive selection
135 webgli: USE flags unselectable if dynamic_stage3
136 webgli: manual extra packages and save button.
137
138 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
139 src/GLIUtility.py:
140 change ping count to 2
141 docs/comparison.html
142 initial commit
143
144 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
145 src/templates/x86ArchitectureTemplate.py:
146 fix map() issue with grub code
147 replace kernel_names and initrd_names loops with one-liners
148
149 27 Nov 2005; Preston Cody <codeman@gentoo.org>
150 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
151 initial gli-dialog support for recommended partitioning layout and clear.
152 failure cleanup now an option for gli-dialog.
153 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
154 added comparison list and updated TODO!
155
156 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIArchitectureTemplate.py:
158 fix to stage1() debug code
159 fix to stage2() debug code
160
161 26 Nov 2005; Preston Cody <codeman@gentoo.org>
162 some more bootloader code fixes. forgot boot_device != mbr_device.
163
164 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
165 src/GLIStorageDevice.py:
166 fix to unallocated space merging when last one is after part 4
167
168 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
169 src/GLIArchitectureTemplate.py:
170 small fix to debugging code in copy_pkg_to_chroot()
171
172 23 Nov 2005; Preston Cody <codeman@gentoo.org>
173 more bugfixes with bootloader code
174 gli-dialog side appears to work
175
176 21 Nov 2005; Preston Cody <codeman@gentoo.org>
177 initial adding of boot_device to backend.
178 initial boot_device support added to gli-dialog.
179 some fixes of my poor coding
180
181 20 Nov 2005; Preston Cody <codeman@gentoo.org>
182 converted gli-dialog to use the install_package_list.
183 gtkfe has already been converted by AllanonJL
184 new way working in gli-dialog now and added to webgli.
185 added set/get_boot_device() to IP
186
187 19 Nov 2005; Preston Cody <codeman@gentoo.org>
188 get_install_package_list added to InstallProfile. This can be used by the FEs
189
190 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
191 src/templates/x86ArchitectureTemplate.py:
192 call ls with '-1 --color=no'
193
194 16 Nov 2005; Preston Cody <codeman@gentoo.org>
195 added warning (#9) to GRP ppl about stage3 tarballs
196
197 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIArchitectureTemplate.py:
199 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
200 confused
201
202 13 Nov 2005; Preston Cody <codeman@gentoo.org>
203 removed protocols from rc.conf screens
204 finished initial rc.conf and make.conf in webgli
205
206 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
207 src/net/server/gliserv.py:
208 add -h option to usage()
209 show time and request URI in debug mode
210 show client IP in debug mode
211 just use IP instead of trying to do a reverse lookup
212
213 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214 src/net/server/gliserv.py:
215 'classier' 401 message
216 proper commandline parsing
217 help via -h
218 user/pass can be specificed via commandline option
219
220 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
221 src/net/server/gliserv.py:
222 basic HTTP auth
223
224 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
225 src/net/server/gliserv.py:
226 dynamic module reloading (yipee!)
227 send 'Last-Modified' header for real files
228 respond to HEAD with just headers
229 src/net/server/handlers/WebGLIHandler.py:
230 icons for drives
231
232 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
233 src/net/server/handlers/WebGLIHandler.py:
234 initial 'pretty' partition table display support
235 clicking partition in 'pretty' display works instead of radio buttons
236 radio buttons and pretty display work together
237 META redirect instead of javascript
238 pretty display stretches across entire screen
239 'Recommended layout' and 'Clear drive' functions
240 properly catch exceptions from do_recommended()
241 src/GLIArchitectureTemplate.py:
242 replace preinst, copy, postinst, rm steps with qmerge
243 whoops...that shouldn't have been commented out
244 create image_dir with -p in copy_pkg_to_chroot()
245 more generic of symlink crappiness
246 new copy_pkg_to_chroot() actually works now
247
248 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
249 src/GLIStorageDevice.py:
250 initial generic disk support
251 fixes for add_partition() code
252 src/net/server/handlers/WebGLIHandler.py:
253 added support for creating generic disks
254 add new partition working
255 save and delete partitions
256
257 6 Nov 2005; Preston Cody <codeman@gentoo.org>
258 webgli: Partitioning making progress.
259
260 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
261 src/GLIArchitectureTemplate.py:
262 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
263 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
264 dir) and works around /etc/gconf symlink problem
265
266 5 Nov 2005; Preston Cody <codeman@gentoo.org>
267 webgli: lots of updates. preliminary partitioning. extra packages works.
268
269 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
270 src/net/server/gliserv.py:
271 httpd now supports HTTPS and falls back to HTTP if not available
272 make fallback actually work
273 src/net/server/SecureXMLRPCServer.py:
274 SecureSocketServer is now threaded
275
276 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
277 src/net/client/gliclient.py:
278 try to use HTTPS for XMLRPC first and fallback to HTTP
279 pretend mode
280 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
281 HTTPS XMLRPC goodness from samyron
282 pass name of certificate
283
284 31 Oct 2005; Preston Cody <codeman@gentoo.org>
285 wegli: daemons and services screens done.
286
287 30 Oct 2005; Preston Cody <codeman@gentoo.org>
288 webgli: networking and users screens
289 added return_redirect to handler.py
290 loading and saving install/client profiles works for webgli now
291 Review also done
292
293 *GLI-0.2 (27 Oct 2005)
294
295 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
296 src/templates/x86ArchitectureTemplate.py:
297 properly check for bootloader emerge exist status with exitsuccess()
298 log output of grub install command
299 add --batch --no-floppy to grub command
300 grubinstallstring only gets logged if debug is on
301 src/GLIUtility.py:
302 update progress bar to 100% when process finishes
303
304 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
305 src/GLIClientController.py:
306 added debugging code for the interaction between the 2 threads via Event()
307 src/GLIUtility.py:
308 doubled the buffer size in spawn()
309 bump buffer size up to 16384
310 only report progress in 5% increments
311 src/GLIArchitectureTemplate.py:
312 kernelpkgs.txt support code
313 above disabled because it sucks
314 added add_pkg_to_world()
315
316 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
317 src/GLIArchitectureTemplate.py:
318 use tar | tar to copy files in copy_pkg_to_chroot()
319 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
320
321 23 Oct 2005; Preston Cody <codeman@gentoo.org>
322 DEBUGGING ADDED TO AT. verbose field added to CConfig.
323
324 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
325 src/net/server/gliserv.py:
326 / maps to index.html
327 look for actual files in html/
328 src/net/html:
329 new template
330 src/GLIUtility.py:
331 added parse_vdb_contents()
332 src/GLIArchitectureTemplate.py:
333 added copy_pkg_to_chroot()
334 added debug code to dynamic-stage3
335 switch dynamic-stage3 to new method
336 lots of bug fixes from adding debug code
337
338 22 Oct 2005; Preston Cody <codeman@gentoo.org>
339 webgli initial bootloader support + changed make.conf.
340 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
341
342 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
343 src/GLIUtility.py:
344 horrible tangled mess of code that is tarball unpacking subprogress display
345 add unpack progress to portage snapshot
346 use read() instead of readlines() in spawn()
347 only update progress bar for whole percents
348
349 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
350 src/templates/x86ArchitectureTemplate.py:
351 change call to 'grub' to use GLIUtility.exitsuccess()
352 add definition of 'build_mode' in _configure_lilo()
353 src/misc/updategtkfe, src/misc/updateglid:
354 fix so subshell is called in root shell
355
356 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
357 src/net/server/handlers/WebGLIHandler.py:
358 stage screen launches URI browser in sized window with various properties set
359
360 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
361 src/misc/updategtkfe:
362 updated to actually work
363 remove previous snapshot and extracted dir before downloading
364 src/misc/updateglid:
365 updated to actually work
366 src/templates/x86ArchitectureTemplate.py:
367 fixed bug where grub code was looking for 'root+root+file_name2'
368
369 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
370 src/net/server/handlers/WebGLIHandler.py:
371 URI browser
372 added mirror selection
373 src/GLIUtility.py:
374 ls via ssh strips off ending *
375
376 16 Oct 2005; Preston Cody <codeman@gentoo.org>
377 more updates to webgli. stage selection.
378
379 11 Oct 2005; Preston Cody <codeman@gentoo.org>
380 updated webgli with preliminary Network Mounts support.
381
382 9 Oct 2005; Preston Cody <codeman@gentoo.org>
383 GenDialog: string formatting and yes/no label fixes.
384 added WebGLI template for gliserv.py
385 added WebGLIHandler as well as a definition for it in gliserv.py
386 updates to the webgli files even though they won't be there for long.
387 Utility: remove exception for non-existant grppkgs.txt until the new livecd
388 goes public.
389
390 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
391 src/net/server/gliserv.py:
392 override dict to not be so anal
393 main server now loads separate module to handle requests
394 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
395 split out profile URLs into separate handler function
396 move handlers into subdirectory
397 add Welcome and Clients handlers
398
399 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/GLIUtility.py:
401 raise exception if password prompt received twice
402
403 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
404 src/GLIUtility.py:
405 removed rot13ify()
406
407 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
408 src/net/server/gliserv.py:
409 allow for param to be passed multiple times in GET
410 no XMLRPC functions return None
411 modify POST request parsing to only create a list if needed
412 fix GET request parsing so the list creation for multiple values works
413 src/net/client/gliclient.py:
414 various typo and type mismatch fixes
415 exit after exception
416
417 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
418 src/net/client/gliclient.py:
419 initial commit
420 pass MAC to XMLRPC functions
421 src/net/server/GLIServerProfile.py:
422 rename GLIClientsProfiles to GLIServerProfile
423
424 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
425 src/net/server/gliserv.py:
426 now handles POST requests
427 move majority of request handling code to common_handler() to reduce code
428 duplication
429 profile loading
430 client reg via XMLRPC goes into SharedInfo()
431 /showclients redesign
432 template fixes
433 allow handler functions to add/change headers
434 save profile
435
436 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
437 src/net/server/GLIClientsProfiles.py:
438 initial commit
439 src/net/server/template.html:
440 initial commit
441 src/net/server/gliserv.py:
442 add template mojo
443
444 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
445 src/net/server/gliserv.py:
446 XMLRPC mojo
447
448 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
449 src/GLIArchitectureTemplate.py:
450 add code in _edit_config() to comment line where variable is defined
451 previously
452 insert new line under previous definition of variable if it exists
453 small _edit_config() cleanup
454 src/GLIStorageDevice.py:
455 add clear_partitions() function
456 new sizes for recommended partition layout
457 automatically calculate swap size for recommended layout
458
459 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
460 src/templates/x86ArchitectureTemplate.py:
461 fat16 mojo
462
463 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
464 src/GLIStorageDevice.py:
465 prevent do_recommended() from being run twice
466 rewrite do_recommended() to be more robust
467 src/GLIArchitectureTemplate.py:
468 rework _edit_config() to not write duplicate entries
469
470 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
471 src/GLIStorageDevice.py:
472 added do_recommended() function to automatically created 256M/1G/* layout
473
474 17 Sep 2005; Preston Cody <codeman@gentoo.org>
475 src/gli-dialog.py: added set_distcc to the list
476 GenDialog: added set_distcc. untested.
477 IP: added install_distcc flag.
478 AT: added install_distcc function based on the flag. runs after build_kernel
479 changed AT spawn command for distcc for nodeps.
480
481 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
482 src/GLIUtility.py:
483 add rot13ify() function
484
485 16 Sep 2005; Preston Cody <codeman@gentoo.org>
486 src/GenDialog.py
487 added a sentence of text. unchecking support added.
488
489 15 Sep 2005; Preston Cody <codeman@gentoo.org>
490 src/GLIUtility.py
491 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
492 src/GenDialog.py
493 still working on extra_packages. transformed the list to new format.
494 added GRP indication to list. untested.
495 TODO lists updated.
496 src/fe/dialog/gli-dialog.py
497 spelling mistook.
498
499 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
500 src/GLIUtility.py:
501 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
502
503 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
504 src/GLIUtility.py:
505 add get_directory_listing_from_uri()
506 add http support to above
507 add ftp support to above
508 add scp support to above
509 src/GLIArchitectureTemplate.py:
510 "0" instead of 0 for key of single-element dict passed to _edit_config()
511
512 5 Sep 2005; Preston Cody <codeman@gentoo.org>
513 value_only -> only_value
514
515 3 Sep 2005; Preston Cody <codeman@gentoo.org>
516 gutted out all of etc_portage structure since it is now all handled by
517 etc_files
518
519 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/GLIArchitectureTemplate.py:
521 install_packages() sends progress update notifications
522 src/templates/x86ArchitectureTemplate.py:
523 increase sleep to 5s between format tries
524 src/GLIClientController.py:
525 pass 'self' to AT instead of 'self._pretend'
526
527 2 Sep 2005; Preston Cody <codeman@gentoo.org>
528 logger -> logger.log in x86AT
529
530 1 Sep 2005; Preston Cody <codeman@gentoo.org>
531 added set_etc_portage to IP. debugging gli-d's support for it.
532
533 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
534 src/templates/x86ArchitectureTemplate.py:
535 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
536
537 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
538 src/GLIArchitectureTemplate.py:
539 add _portage_best_version() function and rework install_packages() to allow
540 for future X of Y tracking
541 Use best_visible instead of best_version
542 tracked down and fixed missing = causing empty install extra packages
543 use = when emerging also
544 quickpkg hokey pokey
545 run _get_packages_to_emerge() again with -pk
546
547 22 Aug 2005; Preston Cody <codeman@gentoo.org>
548 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
549 the end of install_packages.
550 added updateglid to /src/misc
551 updated all core files with new GPL notice and copyright statement.
552
553 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
554 src/GLIUtility.py:
555 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
556 a snapshot in /mnt/cdrom/snapshots/
557 get_snapshot_from_cd() adds file:// at the beginning
558 change calls to extra package special case functions to 'self.blah'
559
560 21 Aug 2005; Preston Cody <codeman@gentoo.org>
561 src/ArchTemplate: changed "voodoo".
562 changed order of portage sync methods. made a fallback to webrsync if
563 normal emerge sync fails.
564 removed get_sources_from_cd because it is obsolete.
565 add special cases to install_packages. remove fatal exception on package
566 install failure b/c the box will still be bootable.
567 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
568 handled in the FEs.
569 src/GenDialog: added a bunch of code for dealing with x11-based packages.
570 awaiting testing.
571
572 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
573 src/GLIStorageDevice.py:
574 global try/except block around fs resizable detection code
575 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
576 install-failed cleanup function
577
578 18 Aug 2005; Preston Cody <codeman@gentoo.org>
579 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
580
581 16 Aug 2005; Preston Cody <codeman@gentoo.org>
582 GLIGenDialog:
583 add drive choices for loaded configs.
584 force snapshot for dynamic_stage3
585 init the snapshoturi input to the cd snapshot if not already selected.
586 if dynamic_stage3, skip the make.conf step.
587 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
588 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
589
590 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/GLIArchitectureTemplate.py:
592 manually call MAKEDEV in stage3-dynamic code
593 copy /etc/inittab.old to /etc/inittab in chroot
594 src/GLIUtility.py:
595 add beginning of validate_uri() function
596 add file:/// support to validate_uri()
597 single quotes when setting livecd password
598
599 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
600 src/GLIGenDialog.py:
601 change getmountpoint() to get_mountpoint()
602 src/misc/updategtkfe:
603 committed script to automatically download latest snapshot and run gtkfe
604 src/templates/x86ArchitectureTemplate.py:
605 fix _configure_lilo_add_windows() for IP -> GLISD stuff
606 src/GLIArchitectureTemplate.py:
607 give tmp_minor an initial value in mount_local_partitions so that the value
608 remain from the previous drive
609
610 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
611 src/templates/x86ArchitectureTemplate.py:
612 Fix _configure_lilo() for IP using GLISD stuff
613 src/GLIArchitectureTemplate.py:
614 install_cron_daemon() treats "none" specially
615
616 14 Aug 2005; Preston Cody <codeman@gentoo.org>
617 old patch from Steven Mertens to resolve bug #96642
618 numerous asthetic changes to GenDialog, no real functionality changes though.
619 strings renamed for global use if necessary.
620 fix all three parts of bug 102291
621 disable set_etc_portage until fully-written.
622
623 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
624 src/GLIClientController.py:
625 lower-case http/ftp proxy envvars
626
627 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
628 src/GLIClientController.py:
629 log end of pre_install steps to aid in debugging
630 src/templates/x86ArchitectureTemplate.py:
631 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
632
633 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/GLIArchitectureTemplate.py
635 check to make sure that the device node we're wait for to exist isn't of
636 type 'free'
637
638 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/GLIGenDialog.py:
640 convert install_packages to list in set_extra_packages()
641 check return code of checklist() call in "Manual" section
642 *actually* fix the first problem
643
644 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
645 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
646 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
647
648 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
649 src/GLIArchitectureTemplate.py:
650 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
651
652 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
653 Add CDATA support to SimpleXMLParser and add utility functions for it.
654
655 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
656 src/GLIArchitectureTemplate.py:
657 Fix case where vixie-cron is specified as a full package atom, as we still
658 don't want to run 'crontab /etc/crontab' for it.
659
660 *GLI-0.1 (3 Aug 2005)
661
662 30 Jul 2005; Preston Cody <codeman@gentoo.org>
663 add scp to list of is_uri() so GenDialog doesn't complain.
664 fixed livecd-kernel bug in bootloader code.
665 fixed gendialog for dynamic_stage3 instead of "networkless"
666 change bootloader to allow for both initrd and initramfs.
667 fix IP for dynamic_stage3.
668 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
669
670 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
671 Added full scp:// URI support to get_uri() in GLIUtility
672 Remove "networkless" from dynamic stage3 if locic.
673 Remove print statement from scp:// code.
674 Change scp code to check for "assword: " instead of "Password:"
675 Fix post-install network code to create net.eth1+ symlink correctly
676 Check to make sure pkg can be split on / and some debugging code
677 Add 2>dev/null to emerge call in _get_packages_to_emerge()
678 SimpleXMLParser handles True/False/None correctly now
679 Comment out above fix
680 Add partitioning wait-for-device-to-exist code to mount_local_partitions
681
682 28 Jul 2005; Scott Myron <samyron@gentoo.org>
683 Removed a FIXME in the GLIClientConfiguration that is no
684 longer needed.
685
686 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
687 Default to x86 in ClientConfig
688 Typo in build-a-stage3 code.
689 Remove MAKEDEV call in build-a-stage3 postscript.
690
691 26 Jul 2005; Preston Cody <codeman@gentoo.org>
692 Rewrote init of IP for gli-d. Other GenDialog updates.
693 allow network_type to be None in CConfig.
694
695 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
696 Add _dynamic_stage3 option to IP.
697 Add check for that option to dynamic stage3 code in ArchTemplate.
698 Fix code to determine default route in get_eth_info() in GLIUtility.
699 Fix serialization of dns-servers in ClientConfig.
700
701 24 Jul 2005; Preston Cody <codeman@gentoo.org>
702 changed default values of cron/logger in IP.
703 moved GenDialog IP init out to the individual files. gli-dialog's version
704 will change quite a bit.
705
706 22 Jul 2005; Preston Cody <codeman@gentoo.org>
707 added ppcArchTemplate. blank now. working on yaboot.
708 modified ArchTemplate for amd64 and ppc custom kernels.
709 skeleton implementation of _configure_yaboot.
710 small fixes to other templates.
711
712 21 Jul 2005; Preston Cody <codeman@gentoo.org>
713 GenDialog updates. changed comment in IP.
714
715 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
716 src/GLIInstallProfile.py:
717 Fix codeman's screwup of changing the service seperator to ',' in the parser
718 without changing it in the serialization code! Also document this in a
719 comment so you find it easier. Everybody needs to make sure they update
720 their install profiles!
721
722 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
723 src/GLIArchitectureTemplate.py:
724 Fix casting of list to string and concat of None with string, as well as
725 commented prototype of checking that mounting actually worked (found a case
726 where mount can return success, but the mount won't be done).
727
728 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
729 src/templates/x86ArchitectureTemplate.py:
730 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
731 checking for the device, and sleeping 1 second each time.
732
733 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
734 src/templates/x86ArchitectureTemplate.py:
735 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
736 bootloader works again. Also rename _install_{grub,lilo} to
737 _configure_{grub,lilo} since they don't install the loaders anymore
738 themselves.
739
740 7 Jul 2005; Preston Cody <codeman@gentoo.org>
741 fix global USE flags to not include the arch types at the end.
742 updates to GenDialog and gli-d.
743
744 6 Jul 2005; Preston Cody <codeman@gentoo.org>
745 fixing bootloader code for no initrd and initrd->initramfs naming change.
746
747 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
748 Proper comments and parameters to GLIException in install_mta()
749 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
750 Add strip() to list_mirrors(), list_subarch_from_mirror() and
751 list_tarball_from_mirror() to eliminate blank last item.
752
753 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
754 Added stage3 generation code.
755
756 5 Jul 2005; Preston Cody <codeman@gentoo.org>
757 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
758 Mild changes to GenDialog.
759
760 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
761 Remove separate install step configure_rc_conf() since it's handled by
762 update_config_files()
763 Make a copy of newvalues in _edit_config() so quotes aren't added when the
764 function is called twice on the same file.
765
766 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
767 Missing \ in sed in _get_packages_to_emerge()
768 Removed explicit emerging of hotplug and no longer add it to the runlevel.
769 Check in _quickpkg_deps() to ignore blank package names returned from
770 _get_packages_to_emerge()
771
772 28 Jun 2005; Preston Cody <codeman@gentoo.org>
773 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
774 in the dialog.py gauge code.
775
776 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
777 Add code to update_config_files() to go through etc_files and update stuff.
778 Check to see that _etc_files['make.conf'] exists in get_make_conf()
779 Only use float() in partition xml parsing code if type == "free"
780
781 28 Jun 2005; Preston Cody <codeman@gentoo.org>
782 finished almost all internationalization of GenDialog.
783 attempt at fixing rc.conf function. moved 3 generate functions out of
784 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
785 added dialog.py to the fe/dialog directory so it actually gets used.
786
787 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
788 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
789
790 27 Jun 2005; Preston Cody <codeman@gentoo.org>
791 fix extra entry in list_mirrors()
792 beginning internationalization runthrough.
793
794 26 Jun 2005; Preston Cody <codeman@gentoo.org>
795 added dialog.py to /src temporarily until it gets accepted upstream.
796 fix for unused value in form in dialog.py and changed heights.
797 fix GenDialog forms.
798
799 25 Jun 2005; Preston Cody <codeman@gentoo.org>
800 Changed hostname/domainname for new baselayout.
801 Changed _add_to_runlevel errors to logs.
802 Updated TODO list to show status of GenDialog
803 More updates to GenDialog including two checklists that probably won't work.
804 update IP to use comma-separated list instead of space separated for services.
805
806 24 Jun 2005; Preston Cody <codeman@gentoo.org>
807 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
808 GenDialog as it gets closer to completion.
809
810 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
811 Modify get_eth_info() to take a full interface name (eth0 fex). float()
812 instead of int() in add_partition_device_partition() for minor (closes 96804)
813
814 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
815 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
816 instead of 'interfaces[interface][1]' since DHCP uses that field for its
817 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
818
819 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
820 Apply spawn() patch from #96644 (with minor changes). Make sure the return
821 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
822 small error with <pipe>.close() returning None. Fix space vs. tab issue.
823 Fix undefined variable 'output' issue in spawn().
824
825 20 Jun 2005; Preston Cody <codeman@gentoo.org>
826 More updates to GenDialog and gli-d.
827
828 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
829 Modify list_mirrors() to return a list of mirror URL/name pairs.
830
831 19 Jun 2005; Preston Cody <codeman@gentoo.org>
832 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
833 get subarch.
834
835 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Backend partitioning will create disklabel is none exists. Installprofile
837 defaults to "" now instead of "msdos" for disklabel type. Fix for
838 mount_local_partitions() to remember device along with minor in the
839 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
840 add else block to log unsupported netmount types to mount_network_shares()
841
842 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
843 src/GLIArchitectureTemplate.py:
844 Refactor kernel_compile common stuff, fix 2.4 build process.
845 src/fe/cli/clife.py:
846 Logging system.
847 src/GLIUtility.py, src/GLIStorageDevice.py:
848 Add comments about re-writes needed for boxes without sysfs.
849
850 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
851 src/GLIArchitectureTemplate.py:
852 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
853 'make dep' call for custom compile. build_mode support for prepare-only and
854 none types completed. custom compile function chains shell functions in
855 spawned script, to allow for catching all errors.
856
857 15 Jun 2005; Preston Cody <codeman@gentoo.org>
858 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
859 and GenDialog. other gendialog updates as well. kernel updates untested.
860
861 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
862 src/GLIInstallProfile.py:
863 Change structure of etc-portage stuff. The serialization was broken before my
864 last commit, and I am the only person that's ever used it. The new schema is
865 as follows:
866 <etc-portage>
867 <file name="package.mask"/>
868 <file name="package.unmask">
869 <entry atom="sys-kernel/openmosix-sources"/>
870 </file>
871 <file name="package.use">
872 <entry atom="sys-libs/db">
873 -java
874 </entry>
875 <entry atom="dev-libs/cyrus-sasl">
876 -ldap
877 </entry>
878 </file>
879 </etc-portage>
880
881
882 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
883 src/GLIInstallProfile.py:
884 Add new entry for gli-profile/kernel-build-method item. Add missing
885 serialize_etc_portage (temporary). Make serialize_make_conf always print the
886 keys in the same order.
887
888 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
889 src/GLIArchitectureTemplate.py:
890 Clean up commenting used by _edit_config(), and fix bug where wrong comment
891 was repeatedly appended to make.conf.
892
893 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
894 src/GLIArchitectureTemplate.py:
895 Put some Linux-2.6 specific code under a if statement. Store list of
896 successfully mounted swap device for using swapoff. Add proper error checking
897 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
898 'file'. Clean up some redundant code (thanks to pychecker).'
899
900 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
901 Fix typos: get_extended() instead of get_extended_partition(). Added
902 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
903 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
904
905 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
906 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
907 in add_network_interface.
908
909 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
910 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
911 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
912 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
913 prepare_chroot.
914
915 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
916 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
917 +src/fe/installer-gtk:
918 Add new automated CLI frontend. Add scripts that are the intended means to
919 use each frontend.
920
921 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
922 src/GLIClientController.py:
923 Add null type to network config, for cases where the interface is already up
924 and should not be touched (netboot for example).
925
926 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
927 src/GLIArchitectureTemplate.py:
928 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
929 string!. Try to use binary packages if available by default.
930
931 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
932 src/GLIArchitectureTemplate.py:
933 More error checking for _add_to_runlevel, to ensure that the init script
934 actually exists before we try to add it. set_services phase must take place
935 after the package installation, otherwise the init scripts might not exist.
936 Find the correct init script for the cron and logging daemons, and add that
937 instead of the package atom.
938
939 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
940 src/GLIArchitectureTemplate.py:
941 Fix up _edit_config so that it works if the file doesn't already exist. Fix
942 usage of 'file' to 'contents' for the variable name, as it shadows
943 __builtin__.file.
944
945 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
946 src/GLIArchitectureTemplate.py:
947 Add MTA install code, and include MTA install phase. Ensure
948 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
949 for 'none' kernel config for build_kernel phase. Put kernel_script in
950 /var/tmp instead of /root for build_kernel phase.
951
952 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
953 Rename mta variables to match syslog/cron variables.
954
955 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
956 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
957 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
958 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
959 src/templates/.cvsignore, src/tests/.cvsignore:
960 Refactor partition formatting again to include error checking. Allow 'none'
961 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
962
963 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
964 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
965 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
966 only have a single spawn call.
967
968 11 Jun 2005; Preston Cody <codeman@gentoo.org>
969 refixed samyron's fix of set_architecture_template.
970
971 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
972 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
973 be executable.
974
975 10 Jun 2005; Scott Myron <samyron@gentoo.org>
976 Fixed one of the FIXME's in the ClientConfiguration. There is now some
977 error checking when you call set_architecture_template.
978
979 10 Jun 2005; Preston Cody <codeman@gentoo.org>
980 moved the mkfsopts input to the partition options menu instead of the during
981 the creation process. updated GenDialog to say it supports reiserfs v3.
982
983 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
984 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
985 Complete support for 'mkfsopts' parameter in main system and dialogfe.
986 Add support for other partition types to dialogfe.
987 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
988 avoid integer overflows and wraparounds.
989
990 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
991 Removed start/end from XML output and added mkfsopts to partitioning info.
992 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
993 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
994 in GLIClientConfiguration. Change from .1 and .9 to constants for
995 partitioning. Fix free space overwriting bug. Remove a few unused functions
996 from rewrite. Fix call to get_partition_at()
997
998 8 Jun 2005; Preston Cody <codeman@gentoo.org>
999 Updates to GenDialog and dialogfe.
1000
1001 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1002 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1003
1004 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1005 more GenDialog updates to partitioning.
1006
1007 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1008 Indenting issue in GLISD/get_ordered_partition_list.
1009 updates to GenDialog partitioning and added default UTC for timezone in IP.
1010
1011 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012 Added GLISD.get_model()
1013
1014 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1015 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1016 More updates to GenDialog :)
1017
1018 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1019 Added get_interface_realname() function.
1020
1021 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1022 Added auto-save of CConfig and copying to new /root after install.
1023 yet even more GenDialog updates.
1024
1025 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1026 removed print statement from GLISD. more updates to GenDialog.
1027
1028 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1029 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1030 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1031 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1032 places in GLIClientConfiguration.
1033
1034 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1035 Fix mount_local_partitions(), configure_fstab(), and
1036 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1037 A few more fixes for templates/x86Archtemplate
1038
1039 27 May 2005; Preston Cody <codeman@gentoo.org>
1040 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1041 a work in progress.
1042
1043 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1044 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1045 directly. GLISD can now handle data imported from XML.
1046
1047 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1048 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1049 handle blank (no disklabel) disks.
1050
1051 20 May 2005; Preston Cody <codeman@gentoo.org>
1052 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1053 up, documented, and separated out serialization and grouped all sections.
1054
1055 19 May 2005; Preston Cody <codeman@gentoo.org>
1056 Reorganization of ClientConfiguration and gutting of unused functions.
1057 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1058
1059 18 May 2005; Preston Cody <codeman@gentoo.org>
1060 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1061
1062 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1064 partitioning. CC serializes install profile to disk and prepare_chroot()
1065 copies it into /mnt/gentoo/root
1066
1067 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1068 Moved URI parsing into new function parse_uri()
1069
1070 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Added XMLParser module.
1072
1073 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1074 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1075 Minor fix to is_uri() regex to allow hyphens in hostname.
1076
1077 12 May 2005; Preston Cody <codeman@gentoo.org>
1078 Updated finishing_cleanup for new unmounting method from agaffney.
1079
1080 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1081 Fix GLILogger to use correct time format string. Fix _edit_config() to
1082 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1083 unicode support to is_realstring().
1084
1085 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1086 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1087 return value instead of non-zero. Add code to output a traceback to the
1088 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1089 instead of --nocolor.
1090
1091 10 May 2005; Preston Cody <codeman@gentoo.org>
1092 Added GLIGenDialog.py to make a generic class for the dialog functions that
1093 can be used by both dialogfe and the netfe/be. updated both for new filename.
1094 date changes. 2004->2005.
1095
1096 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1097 Removed 'quiet=True' from spawn() calls
1098
1099 10 May 2005; Preston Cody <codeman@gentoo.org>
1100 Updated GLIUtility with patches from chotchki. Also added documentation
1101
1102 9 May 2005; Preston Cody <codeman@gentoo.org>
1103 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1104 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1105 from bug #89683, mostly touchups.
1106
1107 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1108 GLIStorageDevice cleanup patch from bug #91761
1109
1110 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1111 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1112 _edit_config(). Error logging casts 'error' to str
1113
1114 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1115 Exceptions received in CC are logged before being passed to the FE. Added
1116 code to CC to handle exceptions *not* thrown by the installer itself.
1117
1118 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1119 get_max_mb_for_resize() returns -1 if not self.resizeable
1120
1121 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1122 More dirty rsync hacks :-/
1123
1124 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1125 Patches from chotchki (bug #90325) to improve CC networking. untested.
1126
1127 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1128 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1129 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1130 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1131 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1132 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1133 _get_packages_to_emerge()
1134
1135 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1136 Added group-adding code to set_users in ArchTemplate
1137
1138 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1139 Added post-install script code
1140
1141 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1142 Fixed encapsulation issues in GLIClientController (bug #90141)
1143
1144 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Update resizing code in GLIStorageDevice
1146
1147 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1148 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1149
1150 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1151 Reverted change to ArchTemplate and added support for commented line in old
1152 code.
1153
1154 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1155 Changed _edit_config() to modify value in-place instead of commenting out and
1156 adding the new value to the end of the file.
1157
1158 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1159 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1160 Also updated TODO list.
1161
1162 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1163 Use blackace's one-liner to add comments for all function for use with
1164 pythondoc.
1165
1166 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 Moved 'end >= device_sectors' check out of loop to check for next partition's
1168 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1169 Partitioning code now tracks start/end of extended for placing logicals. End
1170 point of logical is now adjusted along with start.
1171
1172 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1174 the way of partitioning from a blank disk. Add int() around access to minor
1175 key in partition information due to new partition code leaving them as float.
1176
1177 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1179
1180 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1182
1183 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1184 Added support for DHCP options and MAC addresses in the InstallProfile.
1185
1186 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1187 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1188 sed to properly strip out junk.
1189
1190 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1191 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1192 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1193
1194 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1195 Fixed indent problem in GLICController
1196
1197 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1198 Check for disklabel type "loop" and use the device name without a minor.
1199
1200 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Remove /tmp/compile_output.log and /var/log/install.log when install is
1202 complete. Added code to (hopefully) keep 2nd thread running after install.
1203 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1204 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1205 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1206
1207 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1209 when unpacking tarball.
1210
1211 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1212 rewrote filesystem_tools. looks like it works so ripping out all the old
1213 filesystem_tools code.
1214
1215 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1216 Changed the print statements to logging in the partitioning BE code.
1217 the logger may need to be imported to the x86archtemplate. unknown yet.
1218 Added the finishing_cleanup function.
1219 added a fix to the logger from BenUrban
1220
1221 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1222 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1223 URIs. The blank uri check has been commented out.
1224 ripped out error checking of set_services. this is done by _add_to_runlevel.
1225
1226 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1227 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1228
1229 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1231 the install profile if available. Commented out spawn() debugging prints
1232
1233 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1234 small changes to setup_network_post. moved adding to runlevel of net.x to
1235 after the device gets symlinked. added domainname runlevel command.
1236
1237 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1239 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1240 spawn() call in livecd-kernel code to pass environment variables.
1241 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1242 the install profile if available.
1243
1244 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1245 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1246 to handle installing the livecd kernel into the new system.
1247
1248 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1249 should emerge hotplug and coldplug before adding them to runlevel.
1250
1251 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1252 took chroot out of grub_install command.
1253
1254 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1255 Changed chroot wrapper code in spawn() to write the wrapper the python way
1256 instead of the bash way to avoid quote conflicts. Added
1257 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1258 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1259 as it breaks the piping.
1260
1261 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1262 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1263
1264 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1265 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1266 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1267 GLIInstallProfile.
1268
1269 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1271 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1272 into /mnt/gentoo in prepare_chroot()
1273
1274 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1275 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1276 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1277 to start/end sectors
1278
1279 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 Add 2>&1 to cmd in spawn()
1281
1282 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 Modified GLIUtility.exitsuccess() to work with return value from
1284 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1285 creates wrapper script for commands run inside chroot so multiple commands
1286 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1287 for the generated script from spawn()
1288
1289 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1290 Removed default values for stage tarball URI and portage tree URI from
1291 InstallProfile. These should be set by the FEs. also added services step to
1292 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1293 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1294
1295 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1296 Small fix for setting the default gateway. Also added feature to dialogfe.
1297
1298 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1299 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1300
1301 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1302 Fixed a bunch of true -> True typos. lots of em
1303 only write new resolv.conf if there are dns servers listed.
1304
1305 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1306 Commented out 'display_on_tty8=True' in start_portmap()
1307
1308 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1309 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1310
1311 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1313 lang parameter to __init__()
1314
1315 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1316 updates to TODO list.
1317
1318 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1319 Initial code for quickpkg GRP support. Fix loop to grab packages from
1320 'emerge -p blah'
1321
1322 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1323 check for dhcp in the network stuff and emerge it if it is.
1324 added quickpkg to TODO list
1325
1326 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1327 Changed the raising of 'warning' exceptions to a simple log of the error
1328 so that the installer can continue.
1329
1330 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1331 Some big changes. First, changed most output to display_on_tty8.
1332 Second, added log lines to all templates. Some smaller fixes such as typos.
1333 Also did some cleanups of old commented lines.
1334
1335 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1337 Undo change with fix. Escaping fix in GLIStorageDevice.py
1338
1339 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1340 more updates to TODO list. hopefully we'll soon start removing items instead
1341 of adding them.
1342
1343 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1344 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1345
1346 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1347 updated TODO list. (again)
1348
1349 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1350 changed output of portmap start to display_on_tty8.
1351 fixed bootloader for udev and multiple kernels
1352 fixed custom kernel config (again)
1353
1354 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1355 changed default value of CC._enable_ssh to True because this is smart.
1356 added code to allow custom kernel .config. may be unstable and break. sorry.
1357
1358 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1359 partition() now waits until after it checks for partition flags before delete
1360 the partitions :P
1361
1362 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1363 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1364 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1365 blank.
1366
1367 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1368 Various fixes related to the add_users function. Still not yet finished.
1369 Added things to the TODO list. Lets start using that!
1370
1371 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1372 Added code to x86Template to format newly created partitions. Also added
1373 some error checking code. GLIStorageDevice passes 'minor' with data to
1374 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1375 mounting code.
1376
1377 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1378 Took out unnecessary setting of random livecd root password. the cd already
1379 sets it randomly.
1380
1381 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1382 Took out an unneeded step from CC's run()
1383
1384 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1385 Attempt at detecting and adding windows partitions to lilo.
1386
1387 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1388 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1389 partition. fixed misc exit_status => exitstatus typo.
1390
1391 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1392 Added basic code for resizing filesystems with pyparted. Fixed code for
1393 resizing ntfs and ext2/3.
1394
1395 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1396 Fixed partition() in x86Template so that it scans through logicals and deletes
1397 before deleting containing extended partition. Also clears partition table to
1398 be safe before third pass.
1399
1400 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1401 Added mount_network_shares. not able to test it from this computer.
1402 will test when i get back to school.
1403 also added start_portmap to the client_controller as an always-do.
1404 agaffney says this is needed for NFS mounts to work.
1405
1406 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1407 Partial rewrite of partitioning code in x86Template. No longer shells out to
1408 parted to perform actions, now uses all pyparted calls. Code "works" in a
1409 test, but still needs lots of TLC. Also modified tests/install.py to work
1410 with x86Template and GLIClientConfiguration.
1411
1412 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1413 Initial move of partitioning code from ArchTemplate to x86Template.
1414
1415 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1416 Added grp_install and services to InstallProfile. forgot about the set_root_password
1417
1418 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1419 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1420 Test Install ran very well (skipping partitioning).
1421
1422 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1423 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1424 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1425 some may still have eluded me.
1426
1427 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1428 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1429 Just finished mount_local_partitions in GLIArchitectureTemplate
1430
1431 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1432 Added get_num_sectors() to GLIStorageDevice.
1433
1434 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1436 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1437 from GLIInstallProfile.
1438
1439 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1440 GLIStorageDevice returns "unknown" instead of "" for get_type()
1441
1442 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1443 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1444 actually work. Commented out resizability checking code for speed.
1445
1446 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1447 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1448 GLIStorageDevice at the suggestion of plors
1449
1450 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1451 Added a function to GLIUtility to pull a value from a make.conf-style config
1452 file. Minor type fix to GLIInstallProfile.py
1453
1454 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1455 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1456 network mounts from partition data structure in GLIInstallProfile
1457
1458 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1459 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1460 can be resized.
1461
1462 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1463 Added some of the final functions to GLIInstallTemplate.
1464 Yes this project is still active despite rare use of the Changelog!
1465
1466 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1467 Added the GLIPartitionTools.py file. This is a temporary insertion of
1468 partitioning tools that will eventually go into their own package.
1469
1470 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1471 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1472 for the program). Added __init__(install_profile, client_configuration) to
1473 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1474 to avoid constantly passing stuff every time we call a method.
1475
1476 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1477
1478 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1479 files without messing up all the other stuff in them. This will be used for making
1480 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1481
1482 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1483
1484 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1485 have a few basic things. I added two private methods. One is _depends(). This
1486 will be used for dependency checking (ie. unpacking a tarball requires that
1487 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1488 same syntax as os.system(), however, instead of being run in the liveCD
1489 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1490 isolated the code. Hope to work more this week to get this class formed...
1491
1492 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1493
1494 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1495 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1496 to allow for easier modification (mutable, rather than immutable objects). Updated
1497 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1498 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1499 Added initial unit test code.
1500
1501 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1502
1503 Added initial changelog. Setting up the basic structure of the CVS repository
1504 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1505 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20