/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1189 - (show annotations) (download)
Mon Dec 26 01:51:36 2005 UTC (8 years, 9 months ago) by agaffney
File size: 63022 byte(s)
  modify get_deps() to get deptree for each package and merge into final list
  src/GLIArchitectureTemplate.py:
  combine code for GRP/compile in install_packages() into one block

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.546 2005/12/26 01:51:35 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/runtimedeps.py:
10 initial commit
11 src/GLIPortage.py:
12 use separate script for GRP deps
13 remove calls to portage module
14 modify get_deps() to get deptree for each package and merge into final list
15 src/GLIArchitectureTemplate.py:
16 combine code for GRP/compile in install_packages() into one block
17
18 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIPortage.py:
20 initial commit
21 move some of portage function from GLIAT
22 flipped around a few function args
23 src/GLIArchitectureTemplate.py:
24 revamp install_packages() for new GLIPortage
25
26 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
27 src/GLIArchitectureTemplate.py:
28 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
29
30 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
31 src/net/server/gliserv.py:
32 wrap generated code in a class to isolate it a bit better
33 302 redirects work
34 don't use cgi.escape() for <% %>
35 src/net/server/html/webgli/*:
36 load/save profile
37 src/GLIUtility.py:
38 change /sbin/lspci to just lspci
39
40 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
41 src/GLIClientController.py:
42 change ordering of statements in CC run() while loop to not go past the end
43 of the array
44 src/GLIArchitectureTemplate.py:
45 removed redundant bind mounts
46
47 18 Dec 2005; Preston Cody <codeman@gentoo.org>
48 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
49 added a diagram by blackace from last night.
50 added the glossary in RTF format.
51
52 17 Dec 2005; Preston Cody <codeman@gentoo.org>
53 x86AT: separated out emerge/configure from running of bootloader
54 added MBR drive support to lilo.
55 these changes will likely not work.
56 AT: added setup_and_run_bootloader step.
57
58 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
59 src/net/server/gliserv.py:
60 call generated code in a function
61 src/net/server/html/webgli/*:
62 include top/bottom
63 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
64 src/GLIClientCongifuration.py:
65 install mode magic
66
67 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
68 src/GLIClientController.py:
69 use GLIException when there's an import problem
70 added debug code to show install_steps
71 src/templates/amd64ArchitectureTemplate.py:
72 add . to import path
73 proper path this time: ../../templates
74 src/GLIArchitectureTemplate.py:
75 add _portage_best_version() function
76
77 11 Dec 2005; Preston Cody <codeman@gentoo.org>
78 added initial glossary and gimli diagram to the docs directory.
79 modify gli-dialog to allow editing of the install_profile after loading XML.
80
81 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
82 src/net/server/html/webgli/:
83 converted globaluse, localuse, networkmounts, portagetree, and stageselection
84 moved saveclientconfig stuff into clientconfig
85 moved saveconfigfiles into config files
86 converted etc_portage and makedotconf
87 converted bootloader and kernel
88 convert daemons, extrapackages, networking, review, services, timezone, users
89 src/net/server/gliserv.py:
90 proper 404 handling for .pyhtml extension
91 HTML escape <% %> stuff
92 work around python's sucky regexes
93 src/GLIInstallProfile.py:
94 allow set_{rsync,ftp,http}_proxy() to accept empty values
95
96 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
97 src/net/server/gliserv.py:
98 initial commit of Legolas templating engine
99 302 redirects
100 src/net/server/html/index.html, src/net/server/webgli_template.html:
101 minor changes for new code
102 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
103 initial commit of the conversion from the monolithic WebGLIHandler.py to the
104 one file per path Legolas goodness
105 partitioning[2-4] done
106
107 5 Dec 2005; Preston Cody <codeman@gentoo.org>
108 webgli: dhcp options in CC and post-install.
109 updated comparison chart.
110 webgli: etc/portage/* and distcc support added. not too-well tested.
111
112 4 Dec 2005; Preston Cody <codeman@gentoo.org>
113 webgli_template.html: valign=top on left side.
114 webgli: fix bootloader boot_device. now working.
115 webgli: CC proxy done. post-install proxy in progress.
116
117 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
118 src/net/server/webgli_template.html:
119 increase padding for content cell to 7px and add colspan=2
120
121 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
122 webgli: added graphic bar on top
123 webgli: added hover effects on the links on the left
124 webgli: re-rendered header_bg.png to stretch without artifacts
125
126 3 Dec 2005; Preston Cody <codeman@gentoo.org>
127 webgli: make.conf disabling fixes for dynamic_stage3
128 fixed portage snapshot browse popup
129 all changes tested.
130 webgli: add debug mode to CC screen. the screen still needs lots of work.
131
132 1 Dec 2005; Preston Cody <codeman@gentoo.org>
133 added debug mode question to gli-dialog
134 added CC proxies to CC networking for gli-dialog
135 webgli: fixed skip CC networking if connection active
136 webgli: portage snapshot defaults to CD
137 webgli: bootloader mbr drive selection
138 webgli: USE flags unselectable if dynamic_stage3
139 webgli: manual extra packages and save button.
140
141 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
142 src/GLIUtility.py:
143 change ping count to 2
144 docs/comparison.html
145 initial commit
146
147 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
148 src/templates/x86ArchitectureTemplate.py:
149 fix map() issue with grub code
150 replace kernel_names and initrd_names loops with one-liners
151
152 27 Nov 2005; Preston Cody <codeman@gentoo.org>
153 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
154 initial gli-dialog support for recommended partitioning layout and clear.
155 failure cleanup now an option for gli-dialog.
156 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
157 added comparison list and updated TODO!
158
159 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
160 src/GLIArchitectureTemplate.py:
161 fix to stage1() debug code
162 fix to stage2() debug code
163
164 26 Nov 2005; Preston Cody <codeman@gentoo.org>
165 some more bootloader code fixes. forgot boot_device != mbr_device.
166
167 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
168 src/GLIStorageDevice.py:
169 fix to unallocated space merging when last one is after part 4
170
171 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
172 src/GLIArchitectureTemplate.py:
173 small fix to debugging code in copy_pkg_to_chroot()
174
175 23 Nov 2005; Preston Cody <codeman@gentoo.org>
176 more bugfixes with bootloader code
177 gli-dialog side appears to work
178
179 21 Nov 2005; Preston Cody <codeman@gentoo.org>
180 initial adding of boot_device to backend.
181 initial boot_device support added to gli-dialog.
182 some fixes of my poor coding
183
184 20 Nov 2005; Preston Cody <codeman@gentoo.org>
185 converted gli-dialog to use the install_package_list.
186 gtkfe has already been converted by AllanonJL
187 new way working in gli-dialog now and added to webgli.
188 added set/get_boot_device() to IP
189
190 19 Nov 2005; Preston Cody <codeman@gentoo.org>
191 get_install_package_list added to InstallProfile. This can be used by the FEs
192
193 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
194 src/templates/x86ArchitectureTemplate.py:
195 call ls with '-1 --color=no'
196
197 16 Nov 2005; Preston Cody <codeman@gentoo.org>
198 added warning (#9) to GRP ppl about stage3 tarballs
199
200 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
201 src/GLIArchitectureTemplate.py:
202 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
203 confused
204
205 13 Nov 2005; Preston Cody <codeman@gentoo.org>
206 removed protocols from rc.conf screens
207 finished initial rc.conf and make.conf in webgli
208
209 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/net/server/gliserv.py:
211 add -h option to usage()
212 show time and request URI in debug mode
213 show client IP in debug mode
214 just use IP instead of trying to do a reverse lookup
215
216 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
217 src/net/server/gliserv.py:
218 'classier' 401 message
219 proper commandline parsing
220 help via -h
221 user/pass can be specificed via commandline option
222
223 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
224 src/net/server/gliserv.py:
225 basic HTTP auth
226
227 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
228 src/net/server/gliserv.py:
229 dynamic module reloading (yipee!)
230 send 'Last-Modified' header for real files
231 respond to HEAD with just headers
232 src/net/server/handlers/WebGLIHandler.py:
233 icons for drives
234
235 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
236 src/net/server/handlers/WebGLIHandler.py:
237 initial 'pretty' partition table display support
238 clicking partition in 'pretty' display works instead of radio buttons
239 radio buttons and pretty display work together
240 META redirect instead of javascript
241 pretty display stretches across entire screen
242 'Recommended layout' and 'Clear drive' functions
243 properly catch exceptions from do_recommended()
244 src/GLIArchitectureTemplate.py:
245 replace preinst, copy, postinst, rm steps with qmerge
246 whoops...that shouldn't have been commented out
247 create image_dir with -p in copy_pkg_to_chroot()
248 more generic of symlink crappiness
249 new copy_pkg_to_chroot() actually works now
250
251 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
252 src/GLIStorageDevice.py:
253 initial generic disk support
254 fixes for add_partition() code
255 src/net/server/handlers/WebGLIHandler.py:
256 added support for creating generic disks
257 add new partition working
258 save and delete partitions
259
260 6 Nov 2005; Preston Cody <codeman@gentoo.org>
261 webgli: Partitioning making progress.
262
263 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
264 src/GLIArchitectureTemplate.py:
265 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
266 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
267 dir) and works around /etc/gconf symlink problem
268
269 5 Nov 2005; Preston Cody <codeman@gentoo.org>
270 webgli: lots of updates. preliminary partitioning. extra packages works.
271
272 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
273 src/net/server/gliserv.py:
274 httpd now supports HTTPS and falls back to HTTP if not available
275 make fallback actually work
276 src/net/server/SecureXMLRPCServer.py:
277 SecureSocketServer is now threaded
278
279 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
280 src/net/client/gliclient.py:
281 try to use HTTPS for XMLRPC first and fallback to HTTP
282 pretend mode
283 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
284 HTTPS XMLRPC goodness from samyron
285 pass name of certificate
286
287 31 Oct 2005; Preston Cody <codeman@gentoo.org>
288 wegli: daemons and services screens done.
289
290 30 Oct 2005; Preston Cody <codeman@gentoo.org>
291 webgli: networking and users screens
292 added return_redirect to handler.py
293 loading and saving install/client profiles works for webgli now
294 Review also done
295
296 *GLI-0.2 (27 Oct 2005)
297
298 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
299 src/templates/x86ArchitectureTemplate.py:
300 properly check for bootloader emerge exist status with exitsuccess()
301 log output of grub install command
302 add --batch --no-floppy to grub command
303 grubinstallstring only gets logged if debug is on
304 src/GLIUtility.py:
305 update progress bar to 100% when process finishes
306
307 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
308 src/GLIClientController.py:
309 added debugging code for the interaction between the 2 threads via Event()
310 src/GLIUtility.py:
311 doubled the buffer size in spawn()
312 bump buffer size up to 16384
313 only report progress in 5% increments
314 src/GLIArchitectureTemplate.py:
315 kernelpkgs.txt support code
316 above disabled because it sucks
317 added add_pkg_to_world()
318
319 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
320 src/GLIArchitectureTemplate.py:
321 use tar | tar to copy files in copy_pkg_to_chroot()
322 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
323
324 23 Oct 2005; Preston Cody <codeman@gentoo.org>
325 DEBUGGING ADDED TO AT. verbose field added to CConfig.
326
327 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
328 src/net/server/gliserv.py:
329 / maps to index.html
330 look for actual files in html/
331 src/net/html:
332 new template
333 src/GLIUtility.py:
334 added parse_vdb_contents()
335 src/GLIArchitectureTemplate.py:
336 added copy_pkg_to_chroot()
337 added debug code to dynamic-stage3
338 switch dynamic-stage3 to new method
339 lots of bug fixes from adding debug code
340
341 22 Oct 2005; Preston Cody <codeman@gentoo.org>
342 webgli initial bootloader support + changed make.conf.
343 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
344
345 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIUtility.py:
347 horrible tangled mess of code that is tarball unpacking subprogress display
348 add unpack progress to portage snapshot
349 use read() instead of readlines() in spawn()
350 only update progress bar for whole percents
351
352 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
353 src/templates/x86ArchitectureTemplate.py:
354 change call to 'grub' to use GLIUtility.exitsuccess()
355 add definition of 'build_mode' in _configure_lilo()
356 src/misc/updategtkfe, src/misc/updateglid:
357 fix so subshell is called in root shell
358
359 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
360 src/net/server/handlers/WebGLIHandler.py:
361 stage screen launches URI browser in sized window with various properties set
362
363 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
364 src/misc/updategtkfe:
365 updated to actually work
366 remove previous snapshot and extracted dir before downloading
367 src/misc/updateglid:
368 updated to actually work
369 src/templates/x86ArchitectureTemplate.py:
370 fixed bug where grub code was looking for 'root+root+file_name2'
371
372 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
373 src/net/server/handlers/WebGLIHandler.py:
374 URI browser
375 added mirror selection
376 src/GLIUtility.py:
377 ls via ssh strips off ending *
378
379 16 Oct 2005; Preston Cody <codeman@gentoo.org>
380 more updates to webgli. stage selection.
381
382 11 Oct 2005; Preston Cody <codeman@gentoo.org>
383 updated webgli with preliminary Network Mounts support.
384
385 9 Oct 2005; Preston Cody <codeman@gentoo.org>
386 GenDialog: string formatting and yes/no label fixes.
387 added WebGLI template for gliserv.py
388 added WebGLIHandler as well as a definition for it in gliserv.py
389 updates to the webgli files even though they won't be there for long.
390 Utility: remove exception for non-existant grppkgs.txt until the new livecd
391 goes public.
392
393 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
394 src/net/server/gliserv.py:
395 override dict to not be so anal
396 main server now loads separate module to handle requests
397 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
398 split out profile URLs into separate handler function
399 move handlers into subdirectory
400 add Welcome and Clients handlers
401
402 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
403 src/GLIUtility.py:
404 raise exception if password prompt received twice
405
406 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
407 src/GLIUtility.py:
408 removed rot13ify()
409
410 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
411 src/net/server/gliserv.py:
412 allow for param to be passed multiple times in GET
413 no XMLRPC functions return None
414 modify POST request parsing to only create a list if needed
415 fix GET request parsing so the list creation for multiple values works
416 src/net/client/gliclient.py:
417 various typo and type mismatch fixes
418 exit after exception
419
420 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
421 src/net/client/gliclient.py:
422 initial commit
423 pass MAC to XMLRPC functions
424 src/net/server/GLIServerProfile.py:
425 rename GLIClientsProfiles to GLIServerProfile
426
427 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
428 src/net/server/gliserv.py:
429 now handles POST requests
430 move majority of request handling code to common_handler() to reduce code
431 duplication
432 profile loading
433 client reg via XMLRPC goes into SharedInfo()
434 /showclients redesign
435 template fixes
436 allow handler functions to add/change headers
437 save profile
438
439 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
440 src/net/server/GLIClientsProfiles.py:
441 initial commit
442 src/net/server/template.html:
443 initial commit
444 src/net/server/gliserv.py:
445 add template mojo
446
447 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
448 src/net/server/gliserv.py:
449 XMLRPC mojo
450
451 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
452 src/GLIArchitectureTemplate.py:
453 add code in _edit_config() to comment line where variable is defined
454 previously
455 insert new line under previous definition of variable if it exists
456 small _edit_config() cleanup
457 src/GLIStorageDevice.py:
458 add clear_partitions() function
459 new sizes for recommended partition layout
460 automatically calculate swap size for recommended layout
461
462 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
463 src/templates/x86ArchitectureTemplate.py:
464 fat16 mojo
465
466 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
467 src/GLIStorageDevice.py:
468 prevent do_recommended() from being run twice
469 rewrite do_recommended() to be more robust
470 src/GLIArchitectureTemplate.py:
471 rework _edit_config() to not write duplicate entries
472
473 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
474 src/GLIStorageDevice.py:
475 added do_recommended() function to automatically created 256M/1G/* layout
476
477 17 Sep 2005; Preston Cody <codeman@gentoo.org>
478 src/gli-dialog.py: added set_distcc to the list
479 GenDialog: added set_distcc. untested.
480 IP: added install_distcc flag.
481 AT: added install_distcc function based on the flag. runs after build_kernel
482 changed AT spawn command for distcc for nodeps.
483
484 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
485 src/GLIUtility.py:
486 add rot13ify() function
487
488 16 Sep 2005; Preston Cody <codeman@gentoo.org>
489 src/GenDialog.py
490 added a sentence of text. unchecking support added.
491
492 15 Sep 2005; Preston Cody <codeman@gentoo.org>
493 src/GLIUtility.py
494 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
495 src/GenDialog.py
496 still working on extra_packages. transformed the list to new format.
497 added GRP indication to list. untested.
498 TODO lists updated.
499 src/fe/dialog/gli-dialog.py
500 spelling mistook.
501
502 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
503 src/GLIUtility.py:
504 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
505
506 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
507 src/GLIUtility.py:
508 add get_directory_listing_from_uri()
509 add http support to above
510 add ftp support to above
511 add scp support to above
512 src/GLIArchitectureTemplate.py:
513 "0" instead of 0 for key of single-element dict passed to _edit_config()
514
515 5 Sep 2005; Preston Cody <codeman@gentoo.org>
516 value_only -> only_value
517
518 3 Sep 2005; Preston Cody <codeman@gentoo.org>
519 gutted out all of etc_portage structure since it is now all handled by
520 etc_files
521
522 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
523 src/GLIArchitectureTemplate.py:
524 install_packages() sends progress update notifications
525 src/templates/x86ArchitectureTemplate.py:
526 increase sleep to 5s between format tries
527 src/GLIClientController.py:
528 pass 'self' to AT instead of 'self._pretend'
529
530 2 Sep 2005; Preston Cody <codeman@gentoo.org>
531 logger -> logger.log in x86AT
532
533 1 Sep 2005; Preston Cody <codeman@gentoo.org>
534 added set_etc_portage to IP. debugging gli-d's support for it.
535
536 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
537 src/templates/x86ArchitectureTemplate.py:
538 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
539
540 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
541 src/GLIArchitectureTemplate.py:
542 add _portage_best_version() function and rework install_packages() to allow
543 for future X of Y tracking
544 Use best_visible instead of best_version
545 tracked down and fixed missing = causing empty install extra packages
546 use = when emerging also
547 quickpkg hokey pokey
548 run _get_packages_to_emerge() again with -pk
549
550 22 Aug 2005; Preston Cody <codeman@gentoo.org>
551 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
552 the end of install_packages.
553 added updateglid to /src/misc
554 updated all core files with new GPL notice and copyright statement.
555
556 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
557 src/GLIUtility.py:
558 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
559 a snapshot in /mnt/cdrom/snapshots/
560 get_snapshot_from_cd() adds file:// at the beginning
561 change calls to extra package special case functions to 'self.blah'
562
563 21 Aug 2005; Preston Cody <codeman@gentoo.org>
564 src/ArchTemplate: changed "voodoo".
565 changed order of portage sync methods. made a fallback to webrsync if
566 normal emerge sync fails.
567 removed get_sources_from_cd because it is obsolete.
568 add special cases to install_packages. remove fatal exception on package
569 install failure b/c the box will still be bootable.
570 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
571 handled in the FEs.
572 src/GenDialog: added a bunch of code for dealing with x11-based packages.
573 awaiting testing.
574
575 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
576 src/GLIStorageDevice.py:
577 global try/except block around fs resizable detection code
578 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
579 install-failed cleanup function
580
581 18 Aug 2005; Preston Cody <codeman@gentoo.org>
582 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
583
584 16 Aug 2005; Preston Cody <codeman@gentoo.org>
585 GLIGenDialog:
586 add drive choices for loaded configs.
587 force snapshot for dynamic_stage3
588 init the snapshoturi input to the cd snapshot if not already selected.
589 if dynamic_stage3, skip the make.conf step.
590 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
591 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
592
593 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
594 src/GLIArchitectureTemplate.py:
595 manually call MAKEDEV in stage3-dynamic code
596 copy /etc/inittab.old to /etc/inittab in chroot
597 src/GLIUtility.py:
598 add beginning of validate_uri() function
599 add file:/// support to validate_uri()
600 single quotes when setting livecd password
601
602 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
603 src/GLIGenDialog.py:
604 change getmountpoint() to get_mountpoint()
605 src/misc/updategtkfe:
606 committed script to automatically download latest snapshot and run gtkfe
607 src/templates/x86ArchitectureTemplate.py:
608 fix _configure_lilo_add_windows() for IP -> GLISD stuff
609 src/GLIArchitectureTemplate.py:
610 give tmp_minor an initial value in mount_local_partitions so that the value
611 remain from the previous drive
612
613 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
614 src/templates/x86ArchitectureTemplate.py:
615 Fix _configure_lilo() for IP using GLISD stuff
616 src/GLIArchitectureTemplate.py:
617 install_cron_daemon() treats "none" specially
618
619 14 Aug 2005; Preston Cody <codeman@gentoo.org>
620 old patch from Steven Mertens to resolve bug #96642
621 numerous asthetic changes to GenDialog, no real functionality changes though.
622 strings renamed for global use if necessary.
623 fix all three parts of bug 102291
624 disable set_etc_portage until fully-written.
625
626 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
627 src/GLIClientController.py:
628 lower-case http/ftp proxy envvars
629
630 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
631 src/GLIClientController.py:
632 log end of pre_install steps to aid in debugging
633 src/templates/x86ArchitectureTemplate.py:
634 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
635
636 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
637 src/GLIArchitectureTemplate.py
638 check to make sure that the device node we're wait for to exist isn't of
639 type 'free'
640
641 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
642 src/GLIGenDialog.py:
643 convert install_packages to list in set_extra_packages()
644 check return code of checklist() call in "Manual" section
645 *actually* fix the first problem
646
647 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
648 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
649 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
650
651 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
652 src/GLIArchitectureTemplate.py:
653 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
654
655 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
656 Add CDATA support to SimpleXMLParser and add utility functions for it.
657
658 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
659 src/GLIArchitectureTemplate.py:
660 Fix case where vixie-cron is specified as a full package atom, as we still
661 don't want to run 'crontab /etc/crontab' for it.
662
663 *GLI-0.1 (3 Aug 2005)
664
665 30 Jul 2005; Preston Cody <codeman@gentoo.org>
666 add scp to list of is_uri() so GenDialog doesn't complain.
667 fixed livecd-kernel bug in bootloader code.
668 fixed gendialog for dynamic_stage3 instead of "networkless"
669 change bootloader to allow for both initrd and initramfs.
670 fix IP for dynamic_stage3.
671 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
672
673 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
674 Added full scp:// URI support to get_uri() in GLIUtility
675 Remove "networkless" from dynamic stage3 if locic.
676 Remove print statement from scp:// code.
677 Change scp code to check for "assword: " instead of "Password:"
678 Fix post-install network code to create net.eth1+ symlink correctly
679 Check to make sure pkg can be split on / and some debugging code
680 Add 2>dev/null to emerge call in _get_packages_to_emerge()
681 SimpleXMLParser handles True/False/None correctly now
682 Comment out above fix
683 Add partitioning wait-for-device-to-exist code to mount_local_partitions
684
685 28 Jul 2005; Scott Myron <samyron@gentoo.org>
686 Removed a FIXME in the GLIClientConfiguration that is no
687 longer needed.
688
689 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
690 Default to x86 in ClientConfig
691 Typo in build-a-stage3 code.
692 Remove MAKEDEV call in build-a-stage3 postscript.
693
694 26 Jul 2005; Preston Cody <codeman@gentoo.org>
695 Rewrote init of IP for gli-d. Other GenDialog updates.
696 allow network_type to be None in CConfig.
697
698 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
699 Add _dynamic_stage3 option to IP.
700 Add check for that option to dynamic stage3 code in ArchTemplate.
701 Fix code to determine default route in get_eth_info() in GLIUtility.
702 Fix serialization of dns-servers in ClientConfig.
703
704 24 Jul 2005; Preston Cody <codeman@gentoo.org>
705 changed default values of cron/logger in IP.
706 moved GenDialog IP init out to the individual files. gli-dialog's version
707 will change quite a bit.
708
709 22 Jul 2005; Preston Cody <codeman@gentoo.org>
710 added ppcArchTemplate. blank now. working on yaboot.
711 modified ArchTemplate for amd64 and ppc custom kernels.
712 skeleton implementation of _configure_yaboot.
713 small fixes to other templates.
714
715 21 Jul 2005; Preston Cody <codeman@gentoo.org>
716 GenDialog updates. changed comment in IP.
717
718 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
719 src/GLIInstallProfile.py:
720 Fix codeman's screwup of changing the service seperator to ',' in the parser
721 without changing it in the serialization code! Also document this in a
722 comment so you find it easier. Everybody needs to make sure they update
723 their install profiles!
724
725 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
726 src/GLIArchitectureTemplate.py:
727 Fix casting of list to string and concat of None with string, as well as
728 commented prototype of checking that mounting actually worked (found a case
729 where mount can return success, but the mount won't be done).
730
731 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
732 src/templates/x86ArchitectureTemplate.py:
733 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
734 checking for the device, and sleeping 1 second each time.
735
736 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
737 src/templates/x86ArchitectureTemplate.py:
738 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
739 bootloader works again. Also rename _install_{grub,lilo} to
740 _configure_{grub,lilo} since they don't install the loaders anymore
741 themselves.
742
743 7 Jul 2005; Preston Cody <codeman@gentoo.org>
744 fix global USE flags to not include the arch types at the end.
745 updates to GenDialog and gli-d.
746
747 6 Jul 2005; Preston Cody <codeman@gentoo.org>
748 fixing bootloader code for no initrd and initrd->initramfs naming change.
749
750 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
751 Proper comments and parameters to GLIException in install_mta()
752 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
753 Add strip() to list_mirrors(), list_subarch_from_mirror() and
754 list_tarball_from_mirror() to eliminate blank last item.
755
756 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
757 Added stage3 generation code.
758
759 5 Jul 2005; Preston Cody <codeman@gentoo.org>
760 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
761 Mild changes to GenDialog.
762
763 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
764 Remove separate install step configure_rc_conf() since it's handled by
765 update_config_files()
766 Make a copy of newvalues in _edit_config() so quotes aren't added when the
767 function is called twice on the same file.
768
769 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
770 Missing \ in sed in _get_packages_to_emerge()
771 Removed explicit emerging of hotplug and no longer add it to the runlevel.
772 Check in _quickpkg_deps() to ignore blank package names returned from
773 _get_packages_to_emerge()
774
775 28 Jun 2005; Preston Cody <codeman@gentoo.org>
776 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
777 in the dialog.py gauge code.
778
779 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
780 Add code to update_config_files() to go through etc_files and update stuff.
781 Check to see that _etc_files['make.conf'] exists in get_make_conf()
782 Only use float() in partition xml parsing code if type == "free"
783
784 28 Jun 2005; Preston Cody <codeman@gentoo.org>
785 finished almost all internationalization of GenDialog.
786 attempt at fixing rc.conf function. moved 3 generate functions out of
787 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
788 added dialog.py to the fe/dialog directory so it actually gets used.
789
790 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
791 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
792
793 27 Jun 2005; Preston Cody <codeman@gentoo.org>
794 fix extra entry in list_mirrors()
795 beginning internationalization runthrough.
796
797 26 Jun 2005; Preston Cody <codeman@gentoo.org>
798 added dialog.py to /src temporarily until it gets accepted upstream.
799 fix for unused value in form in dialog.py and changed heights.
800 fix GenDialog forms.
801
802 25 Jun 2005; Preston Cody <codeman@gentoo.org>
803 Changed hostname/domainname for new baselayout.
804 Changed _add_to_runlevel errors to logs.
805 Updated TODO list to show status of GenDialog
806 More updates to GenDialog including two checklists that probably won't work.
807 update IP to use comma-separated list instead of space separated for services.
808
809 24 Jun 2005; Preston Cody <codeman@gentoo.org>
810 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
811 GenDialog as it gets closer to completion.
812
813 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
814 Modify get_eth_info() to take a full interface name (eth0 fex). float()
815 instead of int() in add_partition_device_partition() for minor (closes 96804)
816
817 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
818 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
819 instead of 'interfaces[interface][1]' since DHCP uses that field for its
820 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
821
822 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
823 Apply spawn() patch from #96644 (with minor changes). Make sure the return
824 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
825 small error with <pipe>.close() returning None. Fix space vs. tab issue.
826 Fix undefined variable 'output' issue in spawn().
827
828 20 Jun 2005; Preston Cody <codeman@gentoo.org>
829 More updates to GenDialog and gli-d.
830
831 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
832 Modify list_mirrors() to return a list of mirror URL/name pairs.
833
834 19 Jun 2005; Preston Cody <codeman@gentoo.org>
835 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
836 get subarch.
837
838 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
839 Backend partitioning will create disklabel is none exists. Installprofile
840 defaults to "" now instead of "msdos" for disklabel type. Fix for
841 mount_local_partitions() to remember device along with minor in the
842 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
843 add else block to log unsupported netmount types to mount_network_shares()
844
845 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
846 src/GLIArchitectureTemplate.py:
847 Refactor kernel_compile common stuff, fix 2.4 build process.
848 src/fe/cli/clife.py:
849 Logging system.
850 src/GLIUtility.py, src/GLIStorageDevice.py:
851 Add comments about re-writes needed for boxes without sysfs.
852
853 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
854 src/GLIArchitectureTemplate.py:
855 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
856 'make dep' call for custom compile. build_mode support for prepare-only and
857 none types completed. custom compile function chains shell functions in
858 spawned script, to allow for catching all errors.
859
860 15 Jun 2005; Preston Cody <codeman@gentoo.org>
861 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
862 and GenDialog. other gendialog updates as well. kernel updates untested.
863
864 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
865 src/GLIInstallProfile.py:
866 Change structure of etc-portage stuff. The serialization was broken before my
867 last commit, and I am the only person that's ever used it. The new schema is
868 as follows:
869 <etc-portage>
870 <file name="package.mask"/>
871 <file name="package.unmask">
872 <entry atom="sys-kernel/openmosix-sources"/>
873 </file>
874 <file name="package.use">
875 <entry atom="sys-libs/db">
876 -java
877 </entry>
878 <entry atom="dev-libs/cyrus-sasl">
879 -ldap
880 </entry>
881 </file>
882 </etc-portage>
883
884
885 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
886 src/GLIInstallProfile.py:
887 Add new entry for gli-profile/kernel-build-method item. Add missing
888 serialize_etc_portage (temporary). Make serialize_make_conf always print the
889 keys in the same order.
890
891 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
892 src/GLIArchitectureTemplate.py:
893 Clean up commenting used by _edit_config(), and fix bug where wrong comment
894 was repeatedly appended to make.conf.
895
896 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
897 src/GLIArchitectureTemplate.py:
898 Put some Linux-2.6 specific code under a if statement. Store list of
899 successfully mounted swap device for using swapoff. Add proper error checking
900 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
901 'file'. Clean up some redundant code (thanks to pychecker).'
902
903 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
904 Fix typos: get_extended() instead of get_extended_partition(). Added
905 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
906 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
907
908 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
909 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
910 in add_network_interface.
911
912 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
913 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
914 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
915 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
916 prepare_chroot.
917
918 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
919 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
920 +src/fe/installer-gtk:
921 Add new automated CLI frontend. Add scripts that are the intended means to
922 use each frontend.
923
924 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
925 src/GLIClientController.py:
926 Add null type to network config, for cases where the interface is already up
927 and should not be touched (netboot for example).
928
929 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
930 src/GLIArchitectureTemplate.py:
931 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
932 string!. Try to use binary packages if available by default.
933
934 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
935 src/GLIArchitectureTemplate.py:
936 More error checking for _add_to_runlevel, to ensure that the init script
937 actually exists before we try to add it. set_services phase must take place
938 after the package installation, otherwise the init scripts might not exist.
939 Find the correct init script for the cron and logging daemons, and add that
940 instead of the package atom.
941
942 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
943 src/GLIArchitectureTemplate.py:
944 Fix up _edit_config so that it works if the file doesn't already exist. Fix
945 usage of 'file' to 'contents' for the variable name, as it shadows
946 __builtin__.file.
947
948 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
949 src/GLIArchitectureTemplate.py:
950 Add MTA install code, and include MTA install phase. Ensure
951 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
952 for 'none' kernel config for build_kernel phase. Put kernel_script in
953 /var/tmp instead of /root for build_kernel phase.
954
955 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
956 Rename mta variables to match syslog/cron variables.
957
958 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
959 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
960 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
961 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
962 src/templates/.cvsignore, src/tests/.cvsignore:
963 Refactor partition formatting again to include error checking. Allow 'none'
964 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
965
966 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
967 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
968 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
969 only have a single spawn call.
970
971 11 Jun 2005; Preston Cody <codeman@gentoo.org>
972 refixed samyron's fix of set_architecture_template.
973
974 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
975 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
976 be executable.
977
978 10 Jun 2005; Scott Myron <samyron@gentoo.org>
979 Fixed one of the FIXME's in the ClientConfiguration. There is now some
980 error checking when you call set_architecture_template.
981
982 10 Jun 2005; Preston Cody <codeman@gentoo.org>
983 moved the mkfsopts input to the partition options menu instead of the during
984 the creation process. updated GenDialog to say it supports reiserfs v3.
985
986 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
987 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
988 Complete support for 'mkfsopts' parameter in main system and dialogfe.
989 Add support for other partition types to dialogfe.
990 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
991 avoid integer overflows and wraparounds.
992
993 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994 Removed start/end from XML output and added mkfsopts to partitioning info.
995 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
996 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
997 in GLIClientConfiguration. Change from .1 and .9 to constants for
998 partitioning. Fix free space overwriting bug. Remove a few unused functions
999 from rewrite. Fix call to get_partition_at()
1000
1001 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1002 Updates to GenDialog and dialogfe.
1003
1004 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1005 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1006
1007 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1008 more GenDialog updates to partitioning.
1009
1010 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1011 Indenting issue in GLISD/get_ordered_partition_list.
1012 updates to GenDialog partitioning and added default UTC for timezone in IP.
1013
1014 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1015 Added GLISD.get_model()
1016
1017 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1018 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1019 More updates to GenDialog :)
1020
1021 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1022 Added get_interface_realname() function.
1023
1024 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1025 Added auto-save of CConfig and copying to new /root after install.
1026 yet even more GenDialog updates.
1027
1028 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1029 removed print statement from GLISD. more updates to GenDialog.
1030
1031 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1032 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1033 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1034 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1035 places in GLIClientConfiguration.
1036
1037 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1038 Fix mount_local_partitions(), configure_fstab(), and
1039 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1040 A few more fixes for templates/x86Archtemplate
1041
1042 27 May 2005; Preston Cody <codeman@gentoo.org>
1043 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1044 a work in progress.
1045
1046 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1047 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1048 directly. GLISD can now handle data imported from XML.
1049
1050 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1051 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1052 handle blank (no disklabel) disks.
1053
1054 20 May 2005; Preston Cody <codeman@gentoo.org>
1055 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1056 up, documented, and separated out serialization and grouped all sections.
1057
1058 19 May 2005; Preston Cody <codeman@gentoo.org>
1059 Reorganization of ClientConfiguration and gutting of unused functions.
1060 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1061
1062 18 May 2005; Preston Cody <codeman@gentoo.org>
1063 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1064
1065 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1066 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1067 partitioning. CC serializes install profile to disk and prepare_chroot()
1068 copies it into /mnt/gentoo/root
1069
1070 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Moved URI parsing into new function parse_uri()
1072
1073 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1074 Added XMLParser module.
1075
1076 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1077 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1078 Minor fix to is_uri() regex to allow hyphens in hostname.
1079
1080 12 May 2005; Preston Cody <codeman@gentoo.org>
1081 Updated finishing_cleanup for new unmounting method from agaffney.
1082
1083 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1084 Fix GLILogger to use correct time format string. Fix _edit_config() to
1085 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1086 unicode support to is_realstring().
1087
1088 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1089 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1090 return value instead of non-zero. Add code to output a traceback to the
1091 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1092 instead of --nocolor.
1093
1094 10 May 2005; Preston Cody <codeman@gentoo.org>
1095 Added GLIGenDialog.py to make a generic class for the dialog functions that
1096 can be used by both dialogfe and the netfe/be. updated both for new filename.
1097 date changes. 2004->2005.
1098
1099 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100 Removed 'quiet=True' from spawn() calls
1101
1102 10 May 2005; Preston Cody <codeman@gentoo.org>
1103 Updated GLIUtility with patches from chotchki. Also added documentation
1104
1105 9 May 2005; Preston Cody <codeman@gentoo.org>
1106 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1107 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1108 from bug #89683, mostly touchups.
1109
1110 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1111 GLIStorageDevice cleanup patch from bug #91761
1112
1113 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1114 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1115 _edit_config(). Error logging casts 'error' to str
1116
1117 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1118 Exceptions received in CC are logged before being passed to the FE. Added
1119 code to CC to handle exceptions *not* thrown by the installer itself.
1120
1121 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1122 get_max_mb_for_resize() returns -1 if not self.resizeable
1123
1124 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1125 More dirty rsync hacks :-/
1126
1127 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1128 Patches from chotchki (bug #90325) to improve CC networking. untested.
1129
1130 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1131 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1132 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1133 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1134 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1135 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1136 _get_packages_to_emerge()
1137
1138 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1139 Added group-adding code to set_users in ArchTemplate
1140
1141 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1142 Added post-install script code
1143
1144 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Fixed encapsulation issues in GLIClientController (bug #90141)
1146
1147 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1148 Update resizing code in GLIStorageDevice
1149
1150 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1151 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1152
1153 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1154 Reverted change to ArchTemplate and added support for commented line in old
1155 code.
1156
1157 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1158 Changed _edit_config() to modify value in-place instead of commenting out and
1159 adding the new value to the end of the file.
1160
1161 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1162 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1163 Also updated TODO list.
1164
1165 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1166 Use blackace's one-liner to add comments for all function for use with
1167 pythondoc.
1168
1169 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1170 Moved 'end >= device_sectors' check out of loop to check for next partition's
1171 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1172 Partitioning code now tracks start/end of extended for placing logicals. End
1173 point of logical is now adjusted along with start.
1174
1175 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1176 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1177 the way of partitioning from a blank disk. Add int() around access to minor
1178 key in partition information due to new partition code leaving them as float.
1179
1180 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1182
1183 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1184 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1185
1186 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1187 Added support for DHCP options and MAC addresses in the InstallProfile.
1188
1189 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1191 sed to properly strip out junk.
1192
1193 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1194 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1195 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1196
1197 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1198 Fixed indent problem in GLICController
1199
1200 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Check for disklabel type "loop" and use the device name without a minor.
1202
1203 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1204 Remove /tmp/compile_output.log and /var/log/install.log when install is
1205 complete. Added code to (hopefully) keep 2nd thread running after install.
1206 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1207 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1208 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1209
1210 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1211 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1212 when unpacking tarball.
1213
1214 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1215 rewrote filesystem_tools. looks like it works so ripping out all the old
1216 filesystem_tools code.
1217
1218 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1219 Changed the print statements to logging in the partitioning BE code.
1220 the logger may need to be imported to the x86archtemplate. unknown yet.
1221 Added the finishing_cleanup function.
1222 added a fix to the logger from BenUrban
1223
1224 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1225 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1226 URIs. The blank uri check has been commented out.
1227 ripped out error checking of set_services. this is done by _add_to_runlevel.
1228
1229 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1231
1232 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1234 the install profile if available. Commented out spawn() debugging prints
1235
1236 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1237 small changes to setup_network_post. moved adding to runlevel of net.x to
1238 after the device gets symlinked. added domainname runlevel command.
1239
1240 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1241 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1242 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1243 spawn() call in livecd-kernel code to pass environment variables.
1244 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1245 the install profile if available.
1246
1247 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1248 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1249 to handle installing the livecd kernel into the new system.
1250
1251 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1252 should emerge hotplug and coldplug before adding them to runlevel.
1253
1254 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1255 took chroot out of grub_install command.
1256
1257 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Changed chroot wrapper code in spawn() to write the wrapper the python way
1259 instead of the bash way to avoid quote conflicts. Added
1260 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1261 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1262 as it breaks the piping.
1263
1264 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1265 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1266
1267 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1268 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1269 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1270 GLIInstallProfile.
1271
1272 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1273 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1274 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1275 into /mnt/gentoo in prepare_chroot()
1276
1277 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1278 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1279 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1280 to start/end sectors
1281
1282 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 Add 2>&1 to cmd in spawn()
1284
1285 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 Modified GLIUtility.exitsuccess() to work with return value from
1287 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1288 creates wrapper script for commands run inside chroot so multiple commands
1289 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1290 for the generated script from spawn()
1291
1292 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1293 Removed default values for stage tarball URI and portage tree URI from
1294 InstallProfile. These should be set by the FEs. also added services step to
1295 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1296 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1297
1298 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1299 Small fix for setting the default gateway. Also added feature to dialogfe.
1300
1301 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1303
1304 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1305 Fixed a bunch of true -> True typos. lots of em
1306 only write new resolv.conf if there are dns servers listed.
1307
1308 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 Commented out 'display_on_tty8=True' in start_portmap()
1310
1311 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1312 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1313
1314 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1315 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1316 lang parameter to __init__()
1317
1318 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1319 updates to TODO list.
1320
1321 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 Initial code for quickpkg GRP support. Fix loop to grab packages from
1323 'emerge -p blah'
1324
1325 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1326 check for dhcp in the network stuff and emerge it if it is.
1327 added quickpkg to TODO list
1328
1329 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1330 Changed the raising of 'warning' exceptions to a simple log of the error
1331 so that the installer can continue.
1332
1333 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1334 Some big changes. First, changed most output to display_on_tty8.
1335 Second, added log lines to all templates. Some smaller fixes such as typos.
1336 Also did some cleanups of old commented lines.
1337
1338 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1340 Undo change with fix. Escaping fix in GLIStorageDevice.py
1341
1342 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1343 more updates to TODO list. hopefully we'll soon start removing items instead
1344 of adding them.
1345
1346 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1347 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1348
1349 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1350 updated TODO list. (again)
1351
1352 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1353 changed output of portmap start to display_on_tty8.
1354 fixed bootloader for udev and multiple kernels
1355 fixed custom kernel config (again)
1356
1357 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1358 changed default value of CC._enable_ssh to True because this is smart.
1359 added code to allow custom kernel .config. may be unstable and break. sorry.
1360
1361 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 partition() now waits until after it checks for partition flags before delete
1363 the partitions :P
1364
1365 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1366 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1367 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1368 blank.
1369
1370 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1371 Various fixes related to the add_users function. Still not yet finished.
1372 Added things to the TODO list. Lets start using that!
1373
1374 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1375 Added code to x86Template to format newly created partitions. Also added
1376 some error checking code. GLIStorageDevice passes 'minor' with data to
1377 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1378 mounting code.
1379
1380 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1381 Took out unnecessary setting of random livecd root password. the cd already
1382 sets it randomly.
1383
1384 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 Took out an unneeded step from CC's run()
1386
1387 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1388 Attempt at detecting and adding windows partitions to lilo.
1389
1390 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1391 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1392 partition. fixed misc exit_status => exitstatus typo.
1393
1394 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1395 Added basic code for resizing filesystems with pyparted. Fixed code for
1396 resizing ntfs and ext2/3.
1397
1398 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 Fixed partition() in x86Template so that it scans through logicals and deletes
1400 before deleting containing extended partition. Also clears partition table to
1401 be safe before third pass.
1402
1403 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1404 Added mount_network_shares. not able to test it from this computer.
1405 will test when i get back to school.
1406 also added start_portmap to the client_controller as an always-do.
1407 agaffney says this is needed for NFS mounts to work.
1408
1409 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1410 Partial rewrite of partitioning code in x86Template. No longer shells out to
1411 parted to perform actions, now uses all pyparted calls. Code "works" in a
1412 test, but still needs lots of TLC. Also modified tests/install.py to work
1413 with x86Template and GLIClientConfiguration.
1414
1415 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1416 Initial move of partitioning code from ArchTemplate to x86Template.
1417
1418 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1419 Added grp_install and services to InstallProfile. forgot about the set_root_password
1420
1421 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1422 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1423 Test Install ran very well (skipping partitioning).
1424
1425 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1426 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1427 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1428 some may still have eluded me.
1429
1430 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1431 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1432 Just finished mount_local_partitions in GLIArchitectureTemplate
1433
1434 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 Added get_num_sectors() to GLIStorageDevice.
1436
1437 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1438 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1439 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1440 from GLIInstallProfile.
1441
1442 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1443 GLIStorageDevice returns "unknown" instead of "" for get_type()
1444
1445 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1446 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1447 actually work. Commented out resizability checking code for speed.
1448
1449 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1450 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1451 GLIStorageDevice at the suggestion of plors
1452
1453 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1454 Added a function to GLIUtility to pull a value from a make.conf-style config
1455 file. Minor type fix to GLIInstallProfile.py
1456
1457 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1458 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1459 network mounts from partition data structure in GLIInstallProfile
1460
1461 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1462 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1463 can be resized.
1464
1465 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1466 Added some of the final functions to GLIInstallTemplate.
1467 Yes this project is still active despite rare use of the Changelog!
1468
1469 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1470 Added the GLIPartitionTools.py file. This is a temporary insertion of
1471 partitioning tools that will eventually go into their own package.
1472
1473 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1474 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1475 for the program). Added __init__(install_profile, client_configuration) to
1476 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1477 to avoid constantly passing stuff every time we call a method.
1478
1479 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1480
1481 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1482 files without messing up all the other stuff in them. This will be used for making
1483 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1484
1485 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1486
1487 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1488 have a few basic things. I added two private methods. One is _depends(). This
1489 will be used for dependency checking (ie. unpacking a tarball requires that
1490 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1491 same syntax as os.system(), however, instead of being run in the liveCD
1492 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1493 isolated the code. Hope to work more this week to get this class formed...
1494
1495 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1496
1497 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1498 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1499 to allow for easier modification (mutable, rather than immutable objects). Updated
1500 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1501 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1502 Added initial unit test code.
1503
1504 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1505
1506 Added initial changelog. Setting up the basic structure of the CVS repository
1507 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1508 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20