/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1190 - (show annotations) (download)
Mon Dec 26 02:50:37 2005 UTC (8 years, 8 months ago) by agaffney
File size: 63120 byte(s)
  remove depgraph class
  add debugging code to get_deps()

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.547 2005/12/26 02:50:37 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/runtimedeps.py:
10 initial commit
11 src/GLIPortage.py:
12 use separate script for GRP deps
13 remove calls to portage module
14 modify get_deps() to get deptree for each package and merge into final list
15 remove depgraph class
16 add debugging code to get_deps()
17 src/GLIArchitectureTemplate.py:
18 combine code for GRP/compile in install_packages() into one block
19 debugging code in install_packages()
20
21 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
22 src/GLIPortage.py:
23 initial commit
24 move some of portage function from GLIAT
25 flipped around a few function args
26 src/GLIArchitectureTemplate.py:
27 revamp install_packages() for new GLIPortage
28
29 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
30 src/GLIArchitectureTemplate.py:
31 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
32
33 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
34 src/net/server/gliserv.py:
35 wrap generated code in a class to isolate it a bit better
36 302 redirects work
37 don't use cgi.escape() for <% %>
38 src/net/server/html/webgli/*:
39 load/save profile
40 src/GLIUtility.py:
41 change /sbin/lspci to just lspci
42
43 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
44 src/GLIClientController.py:
45 change ordering of statements in CC run() while loop to not go past the end
46 of the array
47 src/GLIArchitectureTemplate.py:
48 removed redundant bind mounts
49
50 18 Dec 2005; Preston Cody <codeman@gentoo.org>
51 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
52 added a diagram by blackace from last night.
53 added the glossary in RTF format.
54
55 17 Dec 2005; Preston Cody <codeman@gentoo.org>
56 x86AT: separated out emerge/configure from running of bootloader
57 added MBR drive support to lilo.
58 these changes will likely not work.
59 AT: added setup_and_run_bootloader step.
60
61 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
62 src/net/server/gliserv.py:
63 call generated code in a function
64 src/net/server/html/webgli/*:
65 include top/bottom
66 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
67 src/GLIClientCongifuration.py:
68 install mode magic
69
70 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
71 src/GLIClientController.py:
72 use GLIException when there's an import problem
73 added debug code to show install_steps
74 src/templates/amd64ArchitectureTemplate.py:
75 add . to import path
76 proper path this time: ../../templates
77 src/GLIArchitectureTemplate.py:
78 add _portage_best_version() function
79
80 11 Dec 2005; Preston Cody <codeman@gentoo.org>
81 added initial glossary and gimli diagram to the docs directory.
82 modify gli-dialog to allow editing of the install_profile after loading XML.
83
84 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
85 src/net/server/html/webgli/:
86 converted globaluse, localuse, networkmounts, portagetree, and stageselection
87 moved saveclientconfig stuff into clientconfig
88 moved saveconfigfiles into config files
89 converted etc_portage and makedotconf
90 converted bootloader and kernel
91 convert daemons, extrapackages, networking, review, services, timezone, users
92 src/net/server/gliserv.py:
93 proper 404 handling for .pyhtml extension
94 HTML escape <% %> stuff
95 work around python's sucky regexes
96 src/GLIInstallProfile.py:
97 allow set_{rsync,ftp,http}_proxy() to accept empty values
98
99 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
100 src/net/server/gliserv.py:
101 initial commit of Legolas templating engine
102 302 redirects
103 src/net/server/html/index.html, src/net/server/webgli_template.html:
104 minor changes for new code
105 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
106 initial commit of the conversion from the monolithic WebGLIHandler.py to the
107 one file per path Legolas goodness
108 partitioning[2-4] done
109
110 5 Dec 2005; Preston Cody <codeman@gentoo.org>
111 webgli: dhcp options in CC and post-install.
112 updated comparison chart.
113 webgli: etc/portage/* and distcc support added. not too-well tested.
114
115 4 Dec 2005; Preston Cody <codeman@gentoo.org>
116 webgli_template.html: valign=top on left side.
117 webgli: fix bootloader boot_device. now working.
118 webgli: CC proxy done. post-install proxy in progress.
119
120 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
121 src/net/server/webgli_template.html:
122 increase padding for content cell to 7px and add colspan=2
123
124 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
125 webgli: added graphic bar on top
126 webgli: added hover effects on the links on the left
127 webgli: re-rendered header_bg.png to stretch without artifacts
128
129 3 Dec 2005; Preston Cody <codeman@gentoo.org>
130 webgli: make.conf disabling fixes for dynamic_stage3
131 fixed portage snapshot browse popup
132 all changes tested.
133 webgli: add debug mode to CC screen. the screen still needs lots of work.
134
135 1 Dec 2005; Preston Cody <codeman@gentoo.org>
136 added debug mode question to gli-dialog
137 added CC proxies to CC networking for gli-dialog
138 webgli: fixed skip CC networking if connection active
139 webgli: portage snapshot defaults to CD
140 webgli: bootloader mbr drive selection
141 webgli: USE flags unselectable if dynamic_stage3
142 webgli: manual extra packages and save button.
143
144 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
145 src/GLIUtility.py:
146 change ping count to 2
147 docs/comparison.html
148 initial commit
149
150 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
151 src/templates/x86ArchitectureTemplate.py:
152 fix map() issue with grub code
153 replace kernel_names and initrd_names loops with one-liners
154
155 27 Nov 2005; Preston Cody <codeman@gentoo.org>
156 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
157 initial gli-dialog support for recommended partitioning layout and clear.
158 failure cleanup now an option for gli-dialog.
159 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
160 added comparison list and updated TODO!
161
162 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
163 src/GLIArchitectureTemplate.py:
164 fix to stage1() debug code
165 fix to stage2() debug code
166
167 26 Nov 2005; Preston Cody <codeman@gentoo.org>
168 some more bootloader code fixes. forgot boot_device != mbr_device.
169
170 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
171 src/GLIStorageDevice.py:
172 fix to unallocated space merging when last one is after part 4
173
174 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
175 src/GLIArchitectureTemplate.py:
176 small fix to debugging code in copy_pkg_to_chroot()
177
178 23 Nov 2005; Preston Cody <codeman@gentoo.org>
179 more bugfixes with bootloader code
180 gli-dialog side appears to work
181
182 21 Nov 2005; Preston Cody <codeman@gentoo.org>
183 initial adding of boot_device to backend.
184 initial boot_device support added to gli-dialog.
185 some fixes of my poor coding
186
187 20 Nov 2005; Preston Cody <codeman@gentoo.org>
188 converted gli-dialog to use the install_package_list.
189 gtkfe has already been converted by AllanonJL
190 new way working in gli-dialog now and added to webgli.
191 added set/get_boot_device() to IP
192
193 19 Nov 2005; Preston Cody <codeman@gentoo.org>
194 get_install_package_list added to InstallProfile. This can be used by the FEs
195
196 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
197 src/templates/x86ArchitectureTemplate.py:
198 call ls with '-1 --color=no'
199
200 16 Nov 2005; Preston Cody <codeman@gentoo.org>
201 added warning (#9) to GRP ppl about stage3 tarballs
202
203 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
204 src/GLIArchitectureTemplate.py:
205 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
206 confused
207
208 13 Nov 2005; Preston Cody <codeman@gentoo.org>
209 removed protocols from rc.conf screens
210 finished initial rc.conf and make.conf in webgli
211
212 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213 src/net/server/gliserv.py:
214 add -h option to usage()
215 show time and request URI in debug mode
216 show client IP in debug mode
217 just use IP instead of trying to do a reverse lookup
218
219 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
220 src/net/server/gliserv.py:
221 'classier' 401 message
222 proper commandline parsing
223 help via -h
224 user/pass can be specificed via commandline option
225
226 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
227 src/net/server/gliserv.py:
228 basic HTTP auth
229
230 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
231 src/net/server/gliserv.py:
232 dynamic module reloading (yipee!)
233 send 'Last-Modified' header for real files
234 respond to HEAD with just headers
235 src/net/server/handlers/WebGLIHandler.py:
236 icons for drives
237
238 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
239 src/net/server/handlers/WebGLIHandler.py:
240 initial 'pretty' partition table display support
241 clicking partition in 'pretty' display works instead of radio buttons
242 radio buttons and pretty display work together
243 META redirect instead of javascript
244 pretty display stretches across entire screen
245 'Recommended layout' and 'Clear drive' functions
246 properly catch exceptions from do_recommended()
247 src/GLIArchitectureTemplate.py:
248 replace preinst, copy, postinst, rm steps with qmerge
249 whoops...that shouldn't have been commented out
250 create image_dir with -p in copy_pkg_to_chroot()
251 more generic of symlink crappiness
252 new copy_pkg_to_chroot() actually works now
253
254 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/GLIStorageDevice.py:
256 initial generic disk support
257 fixes for add_partition() code
258 src/net/server/handlers/WebGLIHandler.py:
259 added support for creating generic disks
260 add new partition working
261 save and delete partitions
262
263 6 Nov 2005; Preston Cody <codeman@gentoo.org>
264 webgli: Partitioning making progress.
265
266 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
267 src/GLIArchitectureTemplate.py:
268 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
269 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
270 dir) and works around /etc/gconf symlink problem
271
272 5 Nov 2005; Preston Cody <codeman@gentoo.org>
273 webgli: lots of updates. preliminary partitioning. extra packages works.
274
275 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
276 src/net/server/gliserv.py:
277 httpd now supports HTTPS and falls back to HTTP if not available
278 make fallback actually work
279 src/net/server/SecureXMLRPCServer.py:
280 SecureSocketServer is now threaded
281
282 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
283 src/net/client/gliclient.py:
284 try to use HTTPS for XMLRPC first and fallback to HTTP
285 pretend mode
286 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
287 HTTPS XMLRPC goodness from samyron
288 pass name of certificate
289
290 31 Oct 2005; Preston Cody <codeman@gentoo.org>
291 wegli: daemons and services screens done.
292
293 30 Oct 2005; Preston Cody <codeman@gentoo.org>
294 webgli: networking and users screens
295 added return_redirect to handler.py
296 loading and saving install/client profiles works for webgli now
297 Review also done
298
299 *GLI-0.2 (27 Oct 2005)
300
301 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
302 src/templates/x86ArchitectureTemplate.py:
303 properly check for bootloader emerge exist status with exitsuccess()
304 log output of grub install command
305 add --batch --no-floppy to grub command
306 grubinstallstring only gets logged if debug is on
307 src/GLIUtility.py:
308 update progress bar to 100% when process finishes
309
310 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
311 src/GLIClientController.py:
312 added debugging code for the interaction between the 2 threads via Event()
313 src/GLIUtility.py:
314 doubled the buffer size in spawn()
315 bump buffer size up to 16384
316 only report progress in 5% increments
317 src/GLIArchitectureTemplate.py:
318 kernelpkgs.txt support code
319 above disabled because it sucks
320 added add_pkg_to_world()
321
322 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
323 src/GLIArchitectureTemplate.py:
324 use tar | tar to copy files in copy_pkg_to_chroot()
325 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
326
327 23 Oct 2005; Preston Cody <codeman@gentoo.org>
328 DEBUGGING ADDED TO AT. verbose field added to CConfig.
329
330 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
331 src/net/server/gliserv.py:
332 / maps to index.html
333 look for actual files in html/
334 src/net/html:
335 new template
336 src/GLIUtility.py:
337 added parse_vdb_contents()
338 src/GLIArchitectureTemplate.py:
339 added copy_pkg_to_chroot()
340 added debug code to dynamic-stage3
341 switch dynamic-stage3 to new method
342 lots of bug fixes from adding debug code
343
344 22 Oct 2005; Preston Cody <codeman@gentoo.org>
345 webgli initial bootloader support + changed make.conf.
346 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
347
348 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
349 src/GLIUtility.py:
350 horrible tangled mess of code that is tarball unpacking subprogress display
351 add unpack progress to portage snapshot
352 use read() instead of readlines() in spawn()
353 only update progress bar for whole percents
354
355 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
356 src/templates/x86ArchitectureTemplate.py:
357 change call to 'grub' to use GLIUtility.exitsuccess()
358 add definition of 'build_mode' in _configure_lilo()
359 src/misc/updategtkfe, src/misc/updateglid:
360 fix so subshell is called in root shell
361
362 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
363 src/net/server/handlers/WebGLIHandler.py:
364 stage screen launches URI browser in sized window with various properties set
365
366 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
367 src/misc/updategtkfe:
368 updated to actually work
369 remove previous snapshot and extracted dir before downloading
370 src/misc/updateglid:
371 updated to actually work
372 src/templates/x86ArchitectureTemplate.py:
373 fixed bug where grub code was looking for 'root+root+file_name2'
374
375 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/net/server/handlers/WebGLIHandler.py:
377 URI browser
378 added mirror selection
379 src/GLIUtility.py:
380 ls via ssh strips off ending *
381
382 16 Oct 2005; Preston Cody <codeman@gentoo.org>
383 more updates to webgli. stage selection.
384
385 11 Oct 2005; Preston Cody <codeman@gentoo.org>
386 updated webgli with preliminary Network Mounts support.
387
388 9 Oct 2005; Preston Cody <codeman@gentoo.org>
389 GenDialog: string formatting and yes/no label fixes.
390 added WebGLI template for gliserv.py
391 added WebGLIHandler as well as a definition for it in gliserv.py
392 updates to the webgli files even though they won't be there for long.
393 Utility: remove exception for non-existant grppkgs.txt until the new livecd
394 goes public.
395
396 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
397 src/net/server/gliserv.py:
398 override dict to not be so anal
399 main server now loads separate module to handle requests
400 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
401 split out profile URLs into separate handler function
402 move handlers into subdirectory
403 add Welcome and Clients handlers
404
405 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
406 src/GLIUtility.py:
407 raise exception if password prompt received twice
408
409 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/GLIUtility.py:
411 removed rot13ify()
412
413 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/net/server/gliserv.py:
415 allow for param to be passed multiple times in GET
416 no XMLRPC functions return None
417 modify POST request parsing to only create a list if needed
418 fix GET request parsing so the list creation for multiple values works
419 src/net/client/gliclient.py:
420 various typo and type mismatch fixes
421 exit after exception
422
423 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
424 src/net/client/gliclient.py:
425 initial commit
426 pass MAC to XMLRPC functions
427 src/net/server/GLIServerProfile.py:
428 rename GLIClientsProfiles to GLIServerProfile
429
430 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
431 src/net/server/gliserv.py:
432 now handles POST requests
433 move majority of request handling code to common_handler() to reduce code
434 duplication
435 profile loading
436 client reg via XMLRPC goes into SharedInfo()
437 /showclients redesign
438 template fixes
439 allow handler functions to add/change headers
440 save profile
441
442 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
443 src/net/server/GLIClientsProfiles.py:
444 initial commit
445 src/net/server/template.html:
446 initial commit
447 src/net/server/gliserv.py:
448 add template mojo
449
450 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
451 src/net/server/gliserv.py:
452 XMLRPC mojo
453
454 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
455 src/GLIArchitectureTemplate.py:
456 add code in _edit_config() to comment line where variable is defined
457 previously
458 insert new line under previous definition of variable if it exists
459 small _edit_config() cleanup
460 src/GLIStorageDevice.py:
461 add clear_partitions() function
462 new sizes for recommended partition layout
463 automatically calculate swap size for recommended layout
464
465 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
466 src/templates/x86ArchitectureTemplate.py:
467 fat16 mojo
468
469 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
470 src/GLIStorageDevice.py:
471 prevent do_recommended() from being run twice
472 rewrite do_recommended() to be more robust
473 src/GLIArchitectureTemplate.py:
474 rework _edit_config() to not write duplicate entries
475
476 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
477 src/GLIStorageDevice.py:
478 added do_recommended() function to automatically created 256M/1G/* layout
479
480 17 Sep 2005; Preston Cody <codeman@gentoo.org>
481 src/gli-dialog.py: added set_distcc to the list
482 GenDialog: added set_distcc. untested.
483 IP: added install_distcc flag.
484 AT: added install_distcc function based on the flag. runs after build_kernel
485 changed AT spawn command for distcc for nodeps.
486
487 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
488 src/GLIUtility.py:
489 add rot13ify() function
490
491 16 Sep 2005; Preston Cody <codeman@gentoo.org>
492 src/GenDialog.py
493 added a sentence of text. unchecking support added.
494
495 15 Sep 2005; Preston Cody <codeman@gentoo.org>
496 src/GLIUtility.py
497 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
498 src/GenDialog.py
499 still working on extra_packages. transformed the list to new format.
500 added GRP indication to list. untested.
501 TODO lists updated.
502 src/fe/dialog/gli-dialog.py
503 spelling mistook.
504
505 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
506 src/GLIUtility.py:
507 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
508
509 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
510 src/GLIUtility.py:
511 add get_directory_listing_from_uri()
512 add http support to above
513 add ftp support to above
514 add scp support to above
515 src/GLIArchitectureTemplate.py:
516 "0" instead of 0 for key of single-element dict passed to _edit_config()
517
518 5 Sep 2005; Preston Cody <codeman@gentoo.org>
519 value_only -> only_value
520
521 3 Sep 2005; Preston Cody <codeman@gentoo.org>
522 gutted out all of etc_portage structure since it is now all handled by
523 etc_files
524
525 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/GLIArchitectureTemplate.py:
527 install_packages() sends progress update notifications
528 src/templates/x86ArchitectureTemplate.py:
529 increase sleep to 5s between format tries
530 src/GLIClientController.py:
531 pass 'self' to AT instead of 'self._pretend'
532
533 2 Sep 2005; Preston Cody <codeman@gentoo.org>
534 logger -> logger.log in x86AT
535
536 1 Sep 2005; Preston Cody <codeman@gentoo.org>
537 added set_etc_portage to IP. debugging gli-d's support for it.
538
539 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
540 src/templates/x86ArchitectureTemplate.py:
541 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
542
543 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
544 src/GLIArchitectureTemplate.py:
545 add _portage_best_version() function and rework install_packages() to allow
546 for future X of Y tracking
547 Use best_visible instead of best_version
548 tracked down and fixed missing = causing empty install extra packages
549 use = when emerging also
550 quickpkg hokey pokey
551 run _get_packages_to_emerge() again with -pk
552
553 22 Aug 2005; Preston Cody <codeman@gentoo.org>
554 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
555 the end of install_packages.
556 added updateglid to /src/misc
557 updated all core files with new GPL notice and copyright statement.
558
559 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
560 src/GLIUtility.py:
561 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
562 a snapshot in /mnt/cdrom/snapshots/
563 get_snapshot_from_cd() adds file:// at the beginning
564 change calls to extra package special case functions to 'self.blah'
565
566 21 Aug 2005; Preston Cody <codeman@gentoo.org>
567 src/ArchTemplate: changed "voodoo".
568 changed order of portage sync methods. made a fallback to webrsync if
569 normal emerge sync fails.
570 removed get_sources_from_cd because it is obsolete.
571 add special cases to install_packages. remove fatal exception on package
572 install failure b/c the box will still be bootable.
573 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
574 handled in the FEs.
575 src/GenDialog: added a bunch of code for dealing with x11-based packages.
576 awaiting testing.
577
578 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/GLIStorageDevice.py:
580 global try/except block around fs resizable detection code
581 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
582 install-failed cleanup function
583
584 18 Aug 2005; Preston Cody <codeman@gentoo.org>
585 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
586
587 16 Aug 2005; Preston Cody <codeman@gentoo.org>
588 GLIGenDialog:
589 add drive choices for loaded configs.
590 force snapshot for dynamic_stage3
591 init the snapshoturi input to the cd snapshot if not already selected.
592 if dynamic_stage3, skip the make.conf step.
593 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
594 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
595
596 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
597 src/GLIArchitectureTemplate.py:
598 manually call MAKEDEV in stage3-dynamic code
599 copy /etc/inittab.old to /etc/inittab in chroot
600 src/GLIUtility.py:
601 add beginning of validate_uri() function
602 add file:/// support to validate_uri()
603 single quotes when setting livecd password
604
605 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
606 src/GLIGenDialog.py:
607 change getmountpoint() to get_mountpoint()
608 src/misc/updategtkfe:
609 committed script to automatically download latest snapshot and run gtkfe
610 src/templates/x86ArchitectureTemplate.py:
611 fix _configure_lilo_add_windows() for IP -> GLISD stuff
612 src/GLIArchitectureTemplate.py:
613 give tmp_minor an initial value in mount_local_partitions so that the value
614 remain from the previous drive
615
616 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
617 src/templates/x86ArchitectureTemplate.py:
618 Fix _configure_lilo() for IP using GLISD stuff
619 src/GLIArchitectureTemplate.py:
620 install_cron_daemon() treats "none" specially
621
622 14 Aug 2005; Preston Cody <codeman@gentoo.org>
623 old patch from Steven Mertens to resolve bug #96642
624 numerous asthetic changes to GenDialog, no real functionality changes though.
625 strings renamed for global use if necessary.
626 fix all three parts of bug 102291
627 disable set_etc_portage until fully-written.
628
629 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
630 src/GLIClientController.py:
631 lower-case http/ftp proxy envvars
632
633 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/GLIClientController.py:
635 log end of pre_install steps to aid in debugging
636 src/templates/x86ArchitectureTemplate.py:
637 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
638
639 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
640 src/GLIArchitectureTemplate.py
641 check to make sure that the device node we're wait for to exist isn't of
642 type 'free'
643
644 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
645 src/GLIGenDialog.py:
646 convert install_packages to list in set_extra_packages()
647 check return code of checklist() call in "Manual" section
648 *actually* fix the first problem
649
650 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
651 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
652 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
653
654 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
655 src/GLIArchitectureTemplate.py:
656 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
657
658 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
659 Add CDATA support to SimpleXMLParser and add utility functions for it.
660
661 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
662 src/GLIArchitectureTemplate.py:
663 Fix case where vixie-cron is specified as a full package atom, as we still
664 don't want to run 'crontab /etc/crontab' for it.
665
666 *GLI-0.1 (3 Aug 2005)
667
668 30 Jul 2005; Preston Cody <codeman@gentoo.org>
669 add scp to list of is_uri() so GenDialog doesn't complain.
670 fixed livecd-kernel bug in bootloader code.
671 fixed gendialog for dynamic_stage3 instead of "networkless"
672 change bootloader to allow for both initrd and initramfs.
673 fix IP for dynamic_stage3.
674 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
675
676 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
677 Added full scp:// URI support to get_uri() in GLIUtility
678 Remove "networkless" from dynamic stage3 if locic.
679 Remove print statement from scp:// code.
680 Change scp code to check for "assword: " instead of "Password:"
681 Fix post-install network code to create net.eth1+ symlink correctly
682 Check to make sure pkg can be split on / and some debugging code
683 Add 2>dev/null to emerge call in _get_packages_to_emerge()
684 SimpleXMLParser handles True/False/None correctly now
685 Comment out above fix
686 Add partitioning wait-for-device-to-exist code to mount_local_partitions
687
688 28 Jul 2005; Scott Myron <samyron@gentoo.org>
689 Removed a FIXME in the GLIClientConfiguration that is no
690 longer needed.
691
692 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
693 Default to x86 in ClientConfig
694 Typo in build-a-stage3 code.
695 Remove MAKEDEV call in build-a-stage3 postscript.
696
697 26 Jul 2005; Preston Cody <codeman@gentoo.org>
698 Rewrote init of IP for gli-d. Other GenDialog updates.
699 allow network_type to be None in CConfig.
700
701 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
702 Add _dynamic_stage3 option to IP.
703 Add check for that option to dynamic stage3 code in ArchTemplate.
704 Fix code to determine default route in get_eth_info() in GLIUtility.
705 Fix serialization of dns-servers in ClientConfig.
706
707 24 Jul 2005; Preston Cody <codeman@gentoo.org>
708 changed default values of cron/logger in IP.
709 moved GenDialog IP init out to the individual files. gli-dialog's version
710 will change quite a bit.
711
712 22 Jul 2005; Preston Cody <codeman@gentoo.org>
713 added ppcArchTemplate. blank now. working on yaboot.
714 modified ArchTemplate for amd64 and ppc custom kernels.
715 skeleton implementation of _configure_yaboot.
716 small fixes to other templates.
717
718 21 Jul 2005; Preston Cody <codeman@gentoo.org>
719 GenDialog updates. changed comment in IP.
720
721 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
722 src/GLIInstallProfile.py:
723 Fix codeman's screwup of changing the service seperator to ',' in the parser
724 without changing it in the serialization code! Also document this in a
725 comment so you find it easier. Everybody needs to make sure they update
726 their install profiles!
727
728 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
729 src/GLIArchitectureTemplate.py:
730 Fix casting of list to string and concat of None with string, as well as
731 commented prototype of checking that mounting actually worked (found a case
732 where mount can return success, but the mount won't be done).
733
734 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
735 src/templates/x86ArchitectureTemplate.py:
736 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
737 checking for the device, and sleeping 1 second each time.
738
739 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
740 src/templates/x86ArchitectureTemplate.py:
741 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
742 bootloader works again. Also rename _install_{grub,lilo} to
743 _configure_{grub,lilo} since they don't install the loaders anymore
744 themselves.
745
746 7 Jul 2005; Preston Cody <codeman@gentoo.org>
747 fix global USE flags to not include the arch types at the end.
748 updates to GenDialog and gli-d.
749
750 6 Jul 2005; Preston Cody <codeman@gentoo.org>
751 fixing bootloader code for no initrd and initrd->initramfs naming change.
752
753 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
754 Proper comments and parameters to GLIException in install_mta()
755 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
756 Add strip() to list_mirrors(), list_subarch_from_mirror() and
757 list_tarball_from_mirror() to eliminate blank last item.
758
759 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
760 Added stage3 generation code.
761
762 5 Jul 2005; Preston Cody <codeman@gentoo.org>
763 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
764 Mild changes to GenDialog.
765
766 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
767 Remove separate install step configure_rc_conf() since it's handled by
768 update_config_files()
769 Make a copy of newvalues in _edit_config() so quotes aren't added when the
770 function is called twice on the same file.
771
772 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
773 Missing \ in sed in _get_packages_to_emerge()
774 Removed explicit emerging of hotplug and no longer add it to the runlevel.
775 Check in _quickpkg_deps() to ignore blank package names returned from
776 _get_packages_to_emerge()
777
778 28 Jun 2005; Preston Cody <codeman@gentoo.org>
779 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
780 in the dialog.py gauge code.
781
782 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
783 Add code to update_config_files() to go through etc_files and update stuff.
784 Check to see that _etc_files['make.conf'] exists in get_make_conf()
785 Only use float() in partition xml parsing code if type == "free"
786
787 28 Jun 2005; Preston Cody <codeman@gentoo.org>
788 finished almost all internationalization of GenDialog.
789 attempt at fixing rc.conf function. moved 3 generate functions out of
790 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
791 added dialog.py to the fe/dialog directory so it actually gets used.
792
793 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
794 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
795
796 27 Jun 2005; Preston Cody <codeman@gentoo.org>
797 fix extra entry in list_mirrors()
798 beginning internationalization runthrough.
799
800 26 Jun 2005; Preston Cody <codeman@gentoo.org>
801 added dialog.py to /src temporarily until it gets accepted upstream.
802 fix for unused value in form in dialog.py and changed heights.
803 fix GenDialog forms.
804
805 25 Jun 2005; Preston Cody <codeman@gentoo.org>
806 Changed hostname/domainname for new baselayout.
807 Changed _add_to_runlevel errors to logs.
808 Updated TODO list to show status of GenDialog
809 More updates to GenDialog including two checklists that probably won't work.
810 update IP to use comma-separated list instead of space separated for services.
811
812 24 Jun 2005; Preston Cody <codeman@gentoo.org>
813 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
814 GenDialog as it gets closer to completion.
815
816 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
817 Modify get_eth_info() to take a full interface name (eth0 fex). float()
818 instead of int() in add_partition_device_partition() for minor (closes 96804)
819
820 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
821 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
822 instead of 'interfaces[interface][1]' since DHCP uses that field for its
823 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
824
825 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
826 Apply spawn() patch from #96644 (with minor changes). Make sure the return
827 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
828 small error with <pipe>.close() returning None. Fix space vs. tab issue.
829 Fix undefined variable 'output' issue in spawn().
830
831 20 Jun 2005; Preston Cody <codeman@gentoo.org>
832 More updates to GenDialog and gli-d.
833
834 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
835 Modify list_mirrors() to return a list of mirror URL/name pairs.
836
837 19 Jun 2005; Preston Cody <codeman@gentoo.org>
838 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
839 get subarch.
840
841 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
842 Backend partitioning will create disklabel is none exists. Installprofile
843 defaults to "" now instead of "msdos" for disklabel type. Fix for
844 mount_local_partitions() to remember device along with minor in the
845 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
846 add else block to log unsupported netmount types to mount_network_shares()
847
848 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
849 src/GLIArchitectureTemplate.py:
850 Refactor kernel_compile common stuff, fix 2.4 build process.
851 src/fe/cli/clife.py:
852 Logging system.
853 src/GLIUtility.py, src/GLIStorageDevice.py:
854 Add comments about re-writes needed for boxes without sysfs.
855
856 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
857 src/GLIArchitectureTemplate.py:
858 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
859 'make dep' call for custom compile. build_mode support for prepare-only and
860 none types completed. custom compile function chains shell functions in
861 spawned script, to allow for catching all errors.
862
863 15 Jun 2005; Preston Cody <codeman@gentoo.org>
864 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
865 and GenDialog. other gendialog updates as well. kernel updates untested.
866
867 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
868 src/GLIInstallProfile.py:
869 Change structure of etc-portage stuff. The serialization was broken before my
870 last commit, and I am the only person that's ever used it. The new schema is
871 as follows:
872 <etc-portage>
873 <file name="package.mask"/>
874 <file name="package.unmask">
875 <entry atom="sys-kernel/openmosix-sources"/>
876 </file>
877 <file name="package.use">
878 <entry atom="sys-libs/db">
879 -java
880 </entry>
881 <entry atom="dev-libs/cyrus-sasl">
882 -ldap
883 </entry>
884 </file>
885 </etc-portage>
886
887
888 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
889 src/GLIInstallProfile.py:
890 Add new entry for gli-profile/kernel-build-method item. Add missing
891 serialize_etc_portage (temporary). Make serialize_make_conf always print the
892 keys in the same order.
893
894 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
895 src/GLIArchitectureTemplate.py:
896 Clean up commenting used by _edit_config(), and fix bug where wrong comment
897 was repeatedly appended to make.conf.
898
899 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
900 src/GLIArchitectureTemplate.py:
901 Put some Linux-2.6 specific code under a if statement. Store list of
902 successfully mounted swap device for using swapoff. Add proper error checking
903 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
904 'file'. Clean up some redundant code (thanks to pychecker).'
905
906 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
907 Fix typos: get_extended() instead of get_extended_partition(). Added
908 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
909 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
910
911 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
912 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
913 in add_network_interface.
914
915 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
916 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
917 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
918 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
919 prepare_chroot.
920
921 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
922 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
923 +src/fe/installer-gtk:
924 Add new automated CLI frontend. Add scripts that are the intended means to
925 use each frontend.
926
927 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
928 src/GLIClientController.py:
929 Add null type to network config, for cases where the interface is already up
930 and should not be touched (netboot for example).
931
932 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
933 src/GLIArchitectureTemplate.py:
934 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
935 string!. Try to use binary packages if available by default.
936
937 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
938 src/GLIArchitectureTemplate.py:
939 More error checking for _add_to_runlevel, to ensure that the init script
940 actually exists before we try to add it. set_services phase must take place
941 after the package installation, otherwise the init scripts might not exist.
942 Find the correct init script for the cron and logging daemons, and add that
943 instead of the package atom.
944
945 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
946 src/GLIArchitectureTemplate.py:
947 Fix up _edit_config so that it works if the file doesn't already exist. Fix
948 usage of 'file' to 'contents' for the variable name, as it shadows
949 __builtin__.file.
950
951 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
952 src/GLIArchitectureTemplate.py:
953 Add MTA install code, and include MTA install phase. Ensure
954 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
955 for 'none' kernel config for build_kernel phase. Put kernel_script in
956 /var/tmp instead of /root for build_kernel phase.
957
958 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
959 Rename mta variables to match syslog/cron variables.
960
961 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
962 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
963 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
964 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
965 src/templates/.cvsignore, src/tests/.cvsignore:
966 Refactor partition formatting again to include error checking. Allow 'none'
967 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
968
969 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
970 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
971 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
972 only have a single spawn call.
973
974 11 Jun 2005; Preston Cody <codeman@gentoo.org>
975 refixed samyron's fix of set_architecture_template.
976
977 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
978 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
979 be executable.
980
981 10 Jun 2005; Scott Myron <samyron@gentoo.org>
982 Fixed one of the FIXME's in the ClientConfiguration. There is now some
983 error checking when you call set_architecture_template.
984
985 10 Jun 2005; Preston Cody <codeman@gentoo.org>
986 moved the mkfsopts input to the partition options menu instead of the during
987 the creation process. updated GenDialog to say it supports reiserfs v3.
988
989 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
990 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
991 Complete support for 'mkfsopts' parameter in main system and dialogfe.
992 Add support for other partition types to dialogfe.
993 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
994 avoid integer overflows and wraparounds.
995
996 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Removed start/end from XML output and added mkfsopts to partitioning info.
998 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
999 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1000 in GLIClientConfiguration. Change from .1 and .9 to constants for
1001 partitioning. Fix free space overwriting bug. Remove a few unused functions
1002 from rewrite. Fix call to get_partition_at()
1003
1004 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1005 Updates to GenDialog and dialogfe.
1006
1007 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1008 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1009
1010 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1011 more GenDialog updates to partitioning.
1012
1013 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1014 Indenting issue in GLISD/get_ordered_partition_list.
1015 updates to GenDialog partitioning and added default UTC for timezone in IP.
1016
1017 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 Added GLISD.get_model()
1019
1020 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1021 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1022 More updates to GenDialog :)
1023
1024 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1025 Added get_interface_realname() function.
1026
1027 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1028 Added auto-save of CConfig and copying to new /root after install.
1029 yet even more GenDialog updates.
1030
1031 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1032 removed print statement from GLISD. more updates to GenDialog.
1033
1034 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1035 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1036 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1037 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1038 places in GLIClientConfiguration.
1039
1040 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1041 Fix mount_local_partitions(), configure_fstab(), and
1042 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1043 A few more fixes for templates/x86Archtemplate
1044
1045 27 May 2005; Preston Cody <codeman@gentoo.org>
1046 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1047 a work in progress.
1048
1049 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1050 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1051 directly. GLISD can now handle data imported from XML.
1052
1053 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1054 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1055 handle blank (no disklabel) disks.
1056
1057 20 May 2005; Preston Cody <codeman@gentoo.org>
1058 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1059 up, documented, and separated out serialization and grouped all sections.
1060
1061 19 May 2005; Preston Cody <codeman@gentoo.org>
1062 Reorganization of ClientConfiguration and gutting of unused functions.
1063 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1064
1065 18 May 2005; Preston Cody <codeman@gentoo.org>
1066 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1067
1068 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1069 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1070 partitioning. CC serializes install profile to disk and prepare_chroot()
1071 copies it into /mnt/gentoo/root
1072
1073 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1074 Moved URI parsing into new function parse_uri()
1075
1076 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1077 Added XMLParser module.
1078
1079 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1080 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1081 Minor fix to is_uri() regex to allow hyphens in hostname.
1082
1083 12 May 2005; Preston Cody <codeman@gentoo.org>
1084 Updated finishing_cleanup for new unmounting method from agaffney.
1085
1086 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1087 Fix GLILogger to use correct time format string. Fix _edit_config() to
1088 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1089 unicode support to is_realstring().
1090
1091 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1092 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1093 return value instead of non-zero. Add code to output a traceback to the
1094 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1095 instead of --nocolor.
1096
1097 10 May 2005; Preston Cody <codeman@gentoo.org>
1098 Added GLIGenDialog.py to make a generic class for the dialog functions that
1099 can be used by both dialogfe and the netfe/be. updated both for new filename.
1100 date changes. 2004->2005.
1101
1102 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1103 Removed 'quiet=True' from spawn() calls
1104
1105 10 May 2005; Preston Cody <codeman@gentoo.org>
1106 Updated GLIUtility with patches from chotchki. Also added documentation
1107
1108 9 May 2005; Preston Cody <codeman@gentoo.org>
1109 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1110 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1111 from bug #89683, mostly touchups.
1112
1113 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1114 GLIStorageDevice cleanup patch from bug #91761
1115
1116 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1117 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1118 _edit_config(). Error logging casts 'error' to str
1119
1120 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1121 Exceptions received in CC are logged before being passed to the FE. Added
1122 code to CC to handle exceptions *not* thrown by the installer itself.
1123
1124 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1125 get_max_mb_for_resize() returns -1 if not self.resizeable
1126
1127 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1128 More dirty rsync hacks :-/
1129
1130 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1131 Patches from chotchki (bug #90325) to improve CC networking. untested.
1132
1133 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1135 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1136 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1137 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1138 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1139 _get_packages_to_emerge()
1140
1141 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1142 Added group-adding code to set_users in ArchTemplate
1143
1144 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Added post-install script code
1146
1147 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1148 Fixed encapsulation issues in GLIClientController (bug #90141)
1149
1150 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1151 Update resizing code in GLIStorageDevice
1152
1153 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1154 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1155
1156 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1157 Reverted change to ArchTemplate and added support for commented line in old
1158 code.
1159
1160 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Changed _edit_config() to modify value in-place instead of commenting out and
1162 adding the new value to the end of the file.
1163
1164 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1165 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1166 Also updated TODO list.
1167
1168 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1169 Use blackace's one-liner to add comments for all function for use with
1170 pythondoc.
1171
1172 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 Moved 'end >= device_sectors' check out of loop to check for next partition's
1174 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1175 Partitioning code now tracks start/end of extended for placing logicals. End
1176 point of logical is now adjusted along with start.
1177
1178 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1180 the way of partitioning from a blank disk. Add int() around access to minor
1181 key in partition information due to new partition code leaving them as float.
1182
1183 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1184 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1185
1186 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1187 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1188
1189 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1190 Added support for DHCP options and MAC addresses in the InstallProfile.
1191
1192 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1194 sed to properly strip out junk.
1195
1196 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1197 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1198 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1199
1200 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1201 Fixed indent problem in GLICController
1202
1203 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1204 Check for disklabel type "loop" and use the device name without a minor.
1205
1206 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1207 Remove /tmp/compile_output.log and /var/log/install.log when install is
1208 complete. Added code to (hopefully) keep 2nd thread running after install.
1209 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1210 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1211 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1212
1213 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1215 when unpacking tarball.
1216
1217 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1218 rewrote filesystem_tools. looks like it works so ripping out all the old
1219 filesystem_tools code.
1220
1221 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1222 Changed the print statements to logging in the partitioning BE code.
1223 the logger may need to be imported to the x86archtemplate. unknown yet.
1224 Added the finishing_cleanup function.
1225 added a fix to the logger from BenUrban
1226
1227 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1228 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1229 URIs. The blank uri check has been commented out.
1230 ripped out error checking of set_services. this is done by _add_to_runlevel.
1231
1232 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1234
1235 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1236 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1237 the install profile if available. Commented out spawn() debugging prints
1238
1239 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1240 small changes to setup_network_post. moved adding to runlevel of net.x to
1241 after the device gets symlinked. added domainname runlevel command.
1242
1243 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1245 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1246 spawn() call in livecd-kernel code to pass environment variables.
1247 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1248 the install profile if available.
1249
1250 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1252 to handle installing the livecd kernel into the new system.
1253
1254 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1255 should emerge hotplug and coldplug before adding them to runlevel.
1256
1257 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1258 took chroot out of grub_install command.
1259
1260 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1261 Changed chroot wrapper code in spawn() to write the wrapper the python way
1262 instead of the bash way to avoid quote conflicts. Added
1263 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1264 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1265 as it breaks the piping.
1266
1267 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1268 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1269
1270 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1271 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1272 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1273 GLIInstallProfile.
1274
1275 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1276 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1277 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1278 into /mnt/gentoo in prepare_chroot()
1279
1280 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1281 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1282 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1283 to start/end sectors
1284
1285 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 Add 2>&1 to cmd in spawn()
1287
1288 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 Modified GLIUtility.exitsuccess() to work with return value from
1290 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1291 creates wrapper script for commands run inside chroot so multiple commands
1292 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1293 for the generated script from spawn()
1294
1295 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1296 Removed default values for stage tarball URI and portage tree URI from
1297 InstallProfile. These should be set by the FEs. also added services step to
1298 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1299 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1300
1301 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1302 Small fix for setting the default gateway. Also added feature to dialogfe.
1303
1304 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1306
1307 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1308 Fixed a bunch of true -> True typos. lots of em
1309 only write new resolv.conf if there are dns servers listed.
1310
1311 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 Commented out 'display_on_tty8=True' in start_portmap()
1313
1314 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1315 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1316
1317 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1319 lang parameter to __init__()
1320
1321 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1322 updates to TODO list.
1323
1324 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1325 Initial code for quickpkg GRP support. Fix loop to grab packages from
1326 'emerge -p blah'
1327
1328 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1329 check for dhcp in the network stuff and emerge it if it is.
1330 added quickpkg to TODO list
1331
1332 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1333 Changed the raising of 'warning' exceptions to a simple log of the error
1334 so that the installer can continue.
1335
1336 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1337 Some big changes. First, changed most output to display_on_tty8.
1338 Second, added log lines to all templates. Some smaller fixes such as typos.
1339 Also did some cleanups of old commented lines.
1340
1341 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1343 Undo change with fix. Escaping fix in GLIStorageDevice.py
1344
1345 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1346 more updates to TODO list. hopefully we'll soon start removing items instead
1347 of adding them.
1348
1349 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1351
1352 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1353 updated TODO list. (again)
1354
1355 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1356 changed output of portmap start to display_on_tty8.
1357 fixed bootloader for udev and multiple kernels
1358 fixed custom kernel config (again)
1359
1360 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1361 changed default value of CC._enable_ssh to True because this is smart.
1362 added code to allow custom kernel .config. may be unstable and break. sorry.
1363
1364 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1365 partition() now waits until after it checks for partition flags before delete
1366 the partitions :P
1367
1368 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1369 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1370 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1371 blank.
1372
1373 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1374 Various fixes related to the add_users function. Still not yet finished.
1375 Added things to the TODO list. Lets start using that!
1376
1377 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Added code to x86Template to format newly created partitions. Also added
1379 some error checking code. GLIStorageDevice passes 'minor' with data to
1380 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1381 mounting code.
1382
1383 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1384 Took out unnecessary setting of random livecd root password. the cd already
1385 sets it randomly.
1386
1387 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Took out an unneeded step from CC's run()
1389
1390 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1391 Attempt at detecting and adding windows partitions to lilo.
1392
1393 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1394 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1395 partition. fixed misc exit_status => exitstatus typo.
1396
1397 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Added basic code for resizing filesystems with pyparted. Fixed code for
1399 resizing ntfs and ext2/3.
1400
1401 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1402 Fixed partition() in x86Template so that it scans through logicals and deletes
1403 before deleting containing extended partition. Also clears partition table to
1404 be safe before third pass.
1405
1406 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1407 Added mount_network_shares. not able to test it from this computer.
1408 will test when i get back to school.
1409 also added start_portmap to the client_controller as an always-do.
1410 agaffney says this is needed for NFS mounts to work.
1411
1412 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1413 Partial rewrite of partitioning code in x86Template. No longer shells out to
1414 parted to perform actions, now uses all pyparted calls. Code "works" in a
1415 test, but still needs lots of TLC. Also modified tests/install.py to work
1416 with x86Template and GLIClientConfiguration.
1417
1418 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1419 Initial move of partitioning code from ArchTemplate to x86Template.
1420
1421 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1422 Added grp_install and services to InstallProfile. forgot about the set_root_password
1423
1424 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1425 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1426 Test Install ran very well (skipping partitioning).
1427
1428 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1429 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1430 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1431 some may still have eluded me.
1432
1433 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1434 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1435 Just finished mount_local_partitions in GLIArchitectureTemplate
1436
1437 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1438 Added get_num_sectors() to GLIStorageDevice.
1439
1440 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1442 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1443 from GLIInstallProfile.
1444
1445 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1446 GLIStorageDevice returns "unknown" instead of "" for get_type()
1447
1448 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1449 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1450 actually work. Commented out resizability checking code for speed.
1451
1452 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1453 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1454 GLIStorageDevice at the suggestion of plors
1455
1456 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1457 Added a function to GLIUtility to pull a value from a make.conf-style config
1458 file. Minor type fix to GLIInstallProfile.py
1459
1460 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1461 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1462 network mounts from partition data structure in GLIInstallProfile
1463
1464 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1465 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1466 can be resized.
1467
1468 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1469 Added some of the final functions to GLIInstallTemplate.
1470 Yes this project is still active despite rare use of the Changelog!
1471
1472 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1473 Added the GLIPartitionTools.py file. This is a temporary insertion of
1474 partitioning tools that will eventually go into their own package.
1475
1476 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1477 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1478 for the program). Added __init__(install_profile, client_configuration) to
1479 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1480 to avoid constantly passing stuff every time we call a method.
1481
1482 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1483
1484 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1485 files without messing up all the other stuff in them. This will be used for making
1486 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1487
1488 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1489
1490 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1491 have a few basic things. I added two private methods. One is _depends(). This
1492 will be used for dependency checking (ie. unpacking a tarball requires that
1493 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1494 same syntax as os.system(), however, instead of being run in the liveCD
1495 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1496 isolated the code. Hope to work more this week to get this class formed...
1497
1498 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1499
1500 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1501 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1502 to allow for easier modification (mutable, rather than immutable objects). Updated
1503 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1504 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1505 Added initial unit test code.
1506
1507 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1508
1509 Added initial changelog. Setting up the basic structure of the CVS repository
1510 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1511 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20