/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1194 - (show annotations) (download)
Mon Dec 26 06:16:05 2005 UTC (8 years, 7 months ago) by agaffney
File size: 63376 byte(s)
  src/GLIPortage.py:
  exclude packages already in chroot vdb from binary deplist

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.549 2005/12/26 06:16:04 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 exclude packages already in chroot vdb from binary deplist
11
12 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
13 src/runtimedeps.py:
14 remove passing of ROOT
15 src/GLIPortage.py:
16 modify get_deps() to get deptree for each package and merge into final list
17 remove depgraph class
18 add debugging code to get_deps()
19 src/GLIArchitectureTemplate.py:
20 combine code for GRP/compile in install_packages() into one block
21 debugging code in install_packages()
22
23 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
24 src/runtimedeps.py:
25 initial commit
26 src/GLIPortage.py:
27 use separate script for GRP deps
28 remove calls to portage module
29
30 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
31 src/GLIPortage.py:
32 initial commit
33 move some of portage function from GLIAT
34 flipped around a few function args
35 src/GLIArchitectureTemplate.py:
36 revamp install_packages() for new GLIPortage
37
38 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
39 src/GLIArchitectureTemplate.py:
40 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
41
42 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
43 src/net/server/gliserv.py:
44 wrap generated code in a class to isolate it a bit better
45 302 redirects work
46 don't use cgi.escape() for <% %>
47 src/net/server/html/webgli/*:
48 load/save profile
49 src/GLIUtility.py:
50 change /sbin/lspci to just lspci
51
52 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIClientController.py:
54 change ordering of statements in CC run() while loop to not go past the end
55 of the array
56 src/GLIArchitectureTemplate.py:
57 removed redundant bind mounts
58
59 18 Dec 2005; Preston Cody <codeman@gentoo.org>
60 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
61 added a diagram by blackace from last night.
62 added the glossary in RTF format.
63
64 17 Dec 2005; Preston Cody <codeman@gentoo.org>
65 x86AT: separated out emerge/configure from running of bootloader
66 added MBR drive support to lilo.
67 these changes will likely not work.
68 AT: added setup_and_run_bootloader step.
69
70 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
71 src/net/server/gliserv.py:
72 call generated code in a function
73 src/net/server/html/webgli/*:
74 include top/bottom
75 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
76 src/GLIClientCongifuration.py:
77 install mode magic
78
79 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
80 src/GLIClientController.py:
81 use GLIException when there's an import problem
82 added debug code to show install_steps
83 src/templates/amd64ArchitectureTemplate.py:
84 add . to import path
85 proper path this time: ../../templates
86 src/GLIArchitectureTemplate.py:
87 add _portage_best_version() function
88
89 11 Dec 2005; Preston Cody <codeman@gentoo.org>
90 added initial glossary and gimli diagram to the docs directory.
91 modify gli-dialog to allow editing of the install_profile after loading XML.
92
93 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
94 src/net/server/html/webgli/:
95 converted globaluse, localuse, networkmounts, portagetree, and stageselection
96 moved saveclientconfig stuff into clientconfig
97 moved saveconfigfiles into config files
98 converted etc_portage and makedotconf
99 converted bootloader and kernel
100 convert daemons, extrapackages, networking, review, services, timezone, users
101 src/net/server/gliserv.py:
102 proper 404 handling for .pyhtml extension
103 HTML escape <% %> stuff
104 work around python's sucky regexes
105 src/GLIInstallProfile.py:
106 allow set_{rsync,ftp,http}_proxy() to accept empty values
107
108 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
109 src/net/server/gliserv.py:
110 initial commit of Legolas templating engine
111 302 redirects
112 src/net/server/html/index.html, src/net/server/webgli_template.html:
113 minor changes for new code
114 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
115 initial commit of the conversion from the monolithic WebGLIHandler.py to the
116 one file per path Legolas goodness
117 partitioning[2-4] done
118
119 5 Dec 2005; Preston Cody <codeman@gentoo.org>
120 webgli: dhcp options in CC and post-install.
121 updated comparison chart.
122 webgli: etc/portage/* and distcc support added. not too-well tested.
123
124 4 Dec 2005; Preston Cody <codeman@gentoo.org>
125 webgli_template.html: valign=top on left side.
126 webgli: fix bootloader boot_device. now working.
127 webgli: CC proxy done. post-install proxy in progress.
128
129 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
130 src/net/server/webgli_template.html:
131 increase padding for content cell to 7px and add colspan=2
132
133 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
134 webgli: added graphic bar on top
135 webgli: added hover effects on the links on the left
136 webgli: re-rendered header_bg.png to stretch without artifacts
137
138 3 Dec 2005; Preston Cody <codeman@gentoo.org>
139 webgli: make.conf disabling fixes for dynamic_stage3
140 fixed portage snapshot browse popup
141 all changes tested.
142 webgli: add debug mode to CC screen. the screen still needs lots of work.
143
144 1 Dec 2005; Preston Cody <codeman@gentoo.org>
145 added debug mode question to gli-dialog
146 added CC proxies to CC networking for gli-dialog
147 webgli: fixed skip CC networking if connection active
148 webgli: portage snapshot defaults to CD
149 webgli: bootloader mbr drive selection
150 webgli: USE flags unselectable if dynamic_stage3
151 webgli: manual extra packages and save button.
152
153 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
154 src/GLIUtility.py:
155 change ping count to 2
156 docs/comparison.html
157 initial commit
158
159 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
160 src/templates/x86ArchitectureTemplate.py:
161 fix map() issue with grub code
162 replace kernel_names and initrd_names loops with one-liners
163
164 27 Nov 2005; Preston Cody <codeman@gentoo.org>
165 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
166 initial gli-dialog support for recommended partitioning layout and clear.
167 failure cleanup now an option for gli-dialog.
168 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
169 added comparison list and updated TODO!
170
171 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
172 src/GLIArchitectureTemplate.py:
173 fix to stage1() debug code
174 fix to stage2() debug code
175
176 26 Nov 2005; Preston Cody <codeman@gentoo.org>
177 some more bootloader code fixes. forgot boot_device != mbr_device.
178
179 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
180 src/GLIStorageDevice.py:
181 fix to unallocated space merging when last one is after part 4
182
183 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIArchitectureTemplate.py:
185 small fix to debugging code in copy_pkg_to_chroot()
186
187 23 Nov 2005; Preston Cody <codeman@gentoo.org>
188 more bugfixes with bootloader code
189 gli-dialog side appears to work
190
191 21 Nov 2005; Preston Cody <codeman@gentoo.org>
192 initial adding of boot_device to backend.
193 initial boot_device support added to gli-dialog.
194 some fixes of my poor coding
195
196 20 Nov 2005; Preston Cody <codeman@gentoo.org>
197 converted gli-dialog to use the install_package_list.
198 gtkfe has already been converted by AllanonJL
199 new way working in gli-dialog now and added to webgli.
200 added set/get_boot_device() to IP
201
202 19 Nov 2005; Preston Cody <codeman@gentoo.org>
203 get_install_package_list added to InstallProfile. This can be used by the FEs
204
205 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
206 src/templates/x86ArchitectureTemplate.py:
207 call ls with '-1 --color=no'
208
209 16 Nov 2005; Preston Cody <codeman@gentoo.org>
210 added warning (#9) to GRP ppl about stage3 tarballs
211
212 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213 src/GLIArchitectureTemplate.py:
214 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
215 confused
216
217 13 Nov 2005; Preston Cody <codeman@gentoo.org>
218 removed protocols from rc.conf screens
219 finished initial rc.conf and make.conf in webgli
220
221 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
222 src/net/server/gliserv.py:
223 add -h option to usage()
224 show time and request URI in debug mode
225 show client IP in debug mode
226 just use IP instead of trying to do a reverse lookup
227
228 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
229 src/net/server/gliserv.py:
230 'classier' 401 message
231 proper commandline parsing
232 help via -h
233 user/pass can be specificed via commandline option
234
235 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
236 src/net/server/gliserv.py:
237 basic HTTP auth
238
239 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
240 src/net/server/gliserv.py:
241 dynamic module reloading (yipee!)
242 send 'Last-Modified' header for real files
243 respond to HEAD with just headers
244 src/net/server/handlers/WebGLIHandler.py:
245 icons for drives
246
247 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
248 src/net/server/handlers/WebGLIHandler.py:
249 initial 'pretty' partition table display support
250 clicking partition in 'pretty' display works instead of radio buttons
251 radio buttons and pretty display work together
252 META redirect instead of javascript
253 pretty display stretches across entire screen
254 'Recommended layout' and 'Clear drive' functions
255 properly catch exceptions from do_recommended()
256 src/GLIArchitectureTemplate.py:
257 replace preinst, copy, postinst, rm steps with qmerge
258 whoops...that shouldn't have been commented out
259 create image_dir with -p in copy_pkg_to_chroot()
260 more generic of symlink crappiness
261 new copy_pkg_to_chroot() actually works now
262
263 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
264 src/GLIStorageDevice.py:
265 initial generic disk support
266 fixes for add_partition() code
267 src/net/server/handlers/WebGLIHandler.py:
268 added support for creating generic disks
269 add new partition working
270 save and delete partitions
271
272 6 Nov 2005; Preston Cody <codeman@gentoo.org>
273 webgli: Partitioning making progress.
274
275 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
276 src/GLIArchitectureTemplate.py:
277 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
278 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
279 dir) and works around /etc/gconf symlink problem
280
281 5 Nov 2005; Preston Cody <codeman@gentoo.org>
282 webgli: lots of updates. preliminary partitioning. extra packages works.
283
284 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
285 src/net/server/gliserv.py:
286 httpd now supports HTTPS and falls back to HTTP if not available
287 make fallback actually work
288 src/net/server/SecureXMLRPCServer.py:
289 SecureSocketServer is now threaded
290
291 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/client/gliclient.py:
293 try to use HTTPS for XMLRPC first and fallback to HTTP
294 pretend mode
295 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
296 HTTPS XMLRPC goodness from samyron
297 pass name of certificate
298
299 31 Oct 2005; Preston Cody <codeman@gentoo.org>
300 wegli: daemons and services screens done.
301
302 30 Oct 2005; Preston Cody <codeman@gentoo.org>
303 webgli: networking and users screens
304 added return_redirect to handler.py
305 loading and saving install/client profiles works for webgli now
306 Review also done
307
308 *GLI-0.2 (27 Oct 2005)
309
310 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
311 src/templates/x86ArchitectureTemplate.py:
312 properly check for bootloader emerge exist status with exitsuccess()
313 log output of grub install command
314 add --batch --no-floppy to grub command
315 grubinstallstring only gets logged if debug is on
316 src/GLIUtility.py:
317 update progress bar to 100% when process finishes
318
319 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
320 src/GLIClientController.py:
321 added debugging code for the interaction between the 2 threads via Event()
322 src/GLIUtility.py:
323 doubled the buffer size in spawn()
324 bump buffer size up to 16384
325 only report progress in 5% increments
326 src/GLIArchitectureTemplate.py:
327 kernelpkgs.txt support code
328 above disabled because it sucks
329 added add_pkg_to_world()
330
331 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
332 src/GLIArchitectureTemplate.py:
333 use tar | tar to copy files in copy_pkg_to_chroot()
334 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
335
336 23 Oct 2005; Preston Cody <codeman@gentoo.org>
337 DEBUGGING ADDED TO AT. verbose field added to CConfig.
338
339 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
340 src/net/server/gliserv.py:
341 / maps to index.html
342 look for actual files in html/
343 src/net/html:
344 new template
345 src/GLIUtility.py:
346 added parse_vdb_contents()
347 src/GLIArchitectureTemplate.py:
348 added copy_pkg_to_chroot()
349 added debug code to dynamic-stage3
350 switch dynamic-stage3 to new method
351 lots of bug fixes from adding debug code
352
353 22 Oct 2005; Preston Cody <codeman@gentoo.org>
354 webgli initial bootloader support + changed make.conf.
355 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
356
357 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
358 src/GLIUtility.py:
359 horrible tangled mess of code that is tarball unpacking subprogress display
360 add unpack progress to portage snapshot
361 use read() instead of readlines() in spawn()
362 only update progress bar for whole percents
363
364 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
365 src/templates/x86ArchitectureTemplate.py:
366 change call to 'grub' to use GLIUtility.exitsuccess()
367 add definition of 'build_mode' in _configure_lilo()
368 src/misc/updategtkfe, src/misc/updateglid:
369 fix so subshell is called in root shell
370
371 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
372 src/net/server/handlers/WebGLIHandler.py:
373 stage screen launches URI browser in sized window with various properties set
374
375 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/misc/updategtkfe:
377 updated to actually work
378 remove previous snapshot and extracted dir before downloading
379 src/misc/updateglid:
380 updated to actually work
381 src/templates/x86ArchitectureTemplate.py:
382 fixed bug where grub code was looking for 'root+root+file_name2'
383
384 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
385 src/net/server/handlers/WebGLIHandler.py:
386 URI browser
387 added mirror selection
388 src/GLIUtility.py:
389 ls via ssh strips off ending *
390
391 16 Oct 2005; Preston Cody <codeman@gentoo.org>
392 more updates to webgli. stage selection.
393
394 11 Oct 2005; Preston Cody <codeman@gentoo.org>
395 updated webgli with preliminary Network Mounts support.
396
397 9 Oct 2005; Preston Cody <codeman@gentoo.org>
398 GenDialog: string formatting and yes/no label fixes.
399 added WebGLI template for gliserv.py
400 added WebGLIHandler as well as a definition for it in gliserv.py
401 updates to the webgli files even though they won't be there for long.
402 Utility: remove exception for non-existant grppkgs.txt until the new livecd
403 goes public.
404
405 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
406 src/net/server/gliserv.py:
407 override dict to not be so anal
408 main server now loads separate module to handle requests
409 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
410 split out profile URLs into separate handler function
411 move handlers into subdirectory
412 add Welcome and Clients handlers
413
414 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
415 src/GLIUtility.py:
416 raise exception if password prompt received twice
417
418 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
419 src/GLIUtility.py:
420 removed rot13ify()
421
422 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
423 src/net/server/gliserv.py:
424 allow for param to be passed multiple times in GET
425 no XMLRPC functions return None
426 modify POST request parsing to only create a list if needed
427 fix GET request parsing so the list creation for multiple values works
428 src/net/client/gliclient.py:
429 various typo and type mismatch fixes
430 exit after exception
431
432 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
433 src/net/client/gliclient.py:
434 initial commit
435 pass MAC to XMLRPC functions
436 src/net/server/GLIServerProfile.py:
437 rename GLIClientsProfiles to GLIServerProfile
438
439 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
440 src/net/server/gliserv.py:
441 now handles POST requests
442 move majority of request handling code to common_handler() to reduce code
443 duplication
444 profile loading
445 client reg via XMLRPC goes into SharedInfo()
446 /showclients redesign
447 template fixes
448 allow handler functions to add/change headers
449 save profile
450
451 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
452 src/net/server/GLIClientsProfiles.py:
453 initial commit
454 src/net/server/template.html:
455 initial commit
456 src/net/server/gliserv.py:
457 add template mojo
458
459 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
460 src/net/server/gliserv.py:
461 XMLRPC mojo
462
463 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
464 src/GLIArchitectureTemplate.py:
465 add code in _edit_config() to comment line where variable is defined
466 previously
467 insert new line under previous definition of variable if it exists
468 small _edit_config() cleanup
469 src/GLIStorageDevice.py:
470 add clear_partitions() function
471 new sizes for recommended partition layout
472 automatically calculate swap size for recommended layout
473
474 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
475 src/templates/x86ArchitectureTemplate.py:
476 fat16 mojo
477
478 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
479 src/GLIStorageDevice.py:
480 prevent do_recommended() from being run twice
481 rewrite do_recommended() to be more robust
482 src/GLIArchitectureTemplate.py:
483 rework _edit_config() to not write duplicate entries
484
485 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
486 src/GLIStorageDevice.py:
487 added do_recommended() function to automatically created 256M/1G/* layout
488
489 17 Sep 2005; Preston Cody <codeman@gentoo.org>
490 src/gli-dialog.py: added set_distcc to the list
491 GenDialog: added set_distcc. untested.
492 IP: added install_distcc flag.
493 AT: added install_distcc function based on the flag. runs after build_kernel
494 changed AT spawn command for distcc for nodeps.
495
496 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
497 src/GLIUtility.py:
498 add rot13ify() function
499
500 16 Sep 2005; Preston Cody <codeman@gentoo.org>
501 src/GenDialog.py
502 added a sentence of text. unchecking support added.
503
504 15 Sep 2005; Preston Cody <codeman@gentoo.org>
505 src/GLIUtility.py
506 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
507 src/GenDialog.py
508 still working on extra_packages. transformed the list to new format.
509 added GRP indication to list. untested.
510 TODO lists updated.
511 src/fe/dialog/gli-dialog.py
512 spelling mistook.
513
514 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
515 src/GLIUtility.py:
516 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
517
518 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
519 src/GLIUtility.py:
520 add get_directory_listing_from_uri()
521 add http support to above
522 add ftp support to above
523 add scp support to above
524 src/GLIArchitectureTemplate.py:
525 "0" instead of 0 for key of single-element dict passed to _edit_config()
526
527 5 Sep 2005; Preston Cody <codeman@gentoo.org>
528 value_only -> only_value
529
530 3 Sep 2005; Preston Cody <codeman@gentoo.org>
531 gutted out all of etc_portage structure since it is now all handled by
532 etc_files
533
534 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
535 src/GLIArchitectureTemplate.py:
536 install_packages() sends progress update notifications
537 src/templates/x86ArchitectureTemplate.py:
538 increase sleep to 5s between format tries
539 src/GLIClientController.py:
540 pass 'self' to AT instead of 'self._pretend'
541
542 2 Sep 2005; Preston Cody <codeman@gentoo.org>
543 logger -> logger.log in x86AT
544
545 1 Sep 2005; Preston Cody <codeman@gentoo.org>
546 added set_etc_portage to IP. debugging gli-d's support for it.
547
548 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
549 src/templates/x86ArchitectureTemplate.py:
550 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
551
552 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/GLIArchitectureTemplate.py:
554 add _portage_best_version() function and rework install_packages() to allow
555 for future X of Y tracking
556 Use best_visible instead of best_version
557 tracked down and fixed missing = causing empty install extra packages
558 use = when emerging also
559 quickpkg hokey pokey
560 run _get_packages_to_emerge() again with -pk
561
562 22 Aug 2005; Preston Cody <codeman@gentoo.org>
563 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
564 the end of install_packages.
565 added updateglid to /src/misc
566 updated all core files with new GPL notice and copyright statement.
567
568 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
569 src/GLIUtility.py:
570 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
571 a snapshot in /mnt/cdrom/snapshots/
572 get_snapshot_from_cd() adds file:// at the beginning
573 change calls to extra package special case functions to 'self.blah'
574
575 21 Aug 2005; Preston Cody <codeman@gentoo.org>
576 src/ArchTemplate: changed "voodoo".
577 changed order of portage sync methods. made a fallback to webrsync if
578 normal emerge sync fails.
579 removed get_sources_from_cd because it is obsolete.
580 add special cases to install_packages. remove fatal exception on package
581 install failure b/c the box will still be bootable.
582 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
583 handled in the FEs.
584 src/GenDialog: added a bunch of code for dealing with x11-based packages.
585 awaiting testing.
586
587 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
588 src/GLIStorageDevice.py:
589 global try/except block around fs resizable detection code
590 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
591 install-failed cleanup function
592
593 18 Aug 2005; Preston Cody <codeman@gentoo.org>
594 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
595
596 16 Aug 2005; Preston Cody <codeman@gentoo.org>
597 GLIGenDialog:
598 add drive choices for loaded configs.
599 force snapshot for dynamic_stage3
600 init the snapshoturi input to the cd snapshot if not already selected.
601 if dynamic_stage3, skip the make.conf step.
602 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
603 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
604
605 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
606 src/GLIArchitectureTemplate.py:
607 manually call MAKEDEV in stage3-dynamic code
608 copy /etc/inittab.old to /etc/inittab in chroot
609 src/GLIUtility.py:
610 add beginning of validate_uri() function
611 add file:/// support to validate_uri()
612 single quotes when setting livecd password
613
614 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
615 src/GLIGenDialog.py:
616 change getmountpoint() to get_mountpoint()
617 src/misc/updategtkfe:
618 committed script to automatically download latest snapshot and run gtkfe
619 src/templates/x86ArchitectureTemplate.py:
620 fix _configure_lilo_add_windows() for IP -> GLISD stuff
621 src/GLIArchitectureTemplate.py:
622 give tmp_minor an initial value in mount_local_partitions so that the value
623 remain from the previous drive
624
625 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/templates/x86ArchitectureTemplate.py:
627 Fix _configure_lilo() for IP using GLISD stuff
628 src/GLIArchitectureTemplate.py:
629 install_cron_daemon() treats "none" specially
630
631 14 Aug 2005; Preston Cody <codeman@gentoo.org>
632 old patch from Steven Mertens to resolve bug #96642
633 numerous asthetic changes to GenDialog, no real functionality changes though.
634 strings renamed for global use if necessary.
635 fix all three parts of bug 102291
636 disable set_etc_portage until fully-written.
637
638 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/GLIClientController.py:
640 lower-case http/ftp proxy envvars
641
642 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
643 src/GLIClientController.py:
644 log end of pre_install steps to aid in debugging
645 src/templates/x86ArchitectureTemplate.py:
646 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
647
648 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
649 src/GLIArchitectureTemplate.py
650 check to make sure that the device node we're wait for to exist isn't of
651 type 'free'
652
653 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
654 src/GLIGenDialog.py:
655 convert install_packages to list in set_extra_packages()
656 check return code of checklist() call in "Manual" section
657 *actually* fix the first problem
658
659 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
660 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
661 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
662
663 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
664 src/GLIArchitectureTemplate.py:
665 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
666
667 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
668 Add CDATA support to SimpleXMLParser and add utility functions for it.
669
670 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
671 src/GLIArchitectureTemplate.py:
672 Fix case where vixie-cron is specified as a full package atom, as we still
673 don't want to run 'crontab /etc/crontab' for it.
674
675 *GLI-0.1 (3 Aug 2005)
676
677 30 Jul 2005; Preston Cody <codeman@gentoo.org>
678 add scp to list of is_uri() so GenDialog doesn't complain.
679 fixed livecd-kernel bug in bootloader code.
680 fixed gendialog for dynamic_stage3 instead of "networkless"
681 change bootloader to allow for both initrd and initramfs.
682 fix IP for dynamic_stage3.
683 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
684
685 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
686 Added full scp:// URI support to get_uri() in GLIUtility
687 Remove "networkless" from dynamic stage3 if locic.
688 Remove print statement from scp:// code.
689 Change scp code to check for "assword: " instead of "Password:"
690 Fix post-install network code to create net.eth1+ symlink correctly
691 Check to make sure pkg can be split on / and some debugging code
692 Add 2>dev/null to emerge call in _get_packages_to_emerge()
693 SimpleXMLParser handles True/False/None correctly now
694 Comment out above fix
695 Add partitioning wait-for-device-to-exist code to mount_local_partitions
696
697 28 Jul 2005; Scott Myron <samyron@gentoo.org>
698 Removed a FIXME in the GLIClientConfiguration that is no
699 longer needed.
700
701 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
702 Default to x86 in ClientConfig
703 Typo in build-a-stage3 code.
704 Remove MAKEDEV call in build-a-stage3 postscript.
705
706 26 Jul 2005; Preston Cody <codeman@gentoo.org>
707 Rewrote init of IP for gli-d. Other GenDialog updates.
708 allow network_type to be None in CConfig.
709
710 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
711 Add _dynamic_stage3 option to IP.
712 Add check for that option to dynamic stage3 code in ArchTemplate.
713 Fix code to determine default route in get_eth_info() in GLIUtility.
714 Fix serialization of dns-servers in ClientConfig.
715
716 24 Jul 2005; Preston Cody <codeman@gentoo.org>
717 changed default values of cron/logger in IP.
718 moved GenDialog IP init out to the individual files. gli-dialog's version
719 will change quite a bit.
720
721 22 Jul 2005; Preston Cody <codeman@gentoo.org>
722 added ppcArchTemplate. blank now. working on yaboot.
723 modified ArchTemplate for amd64 and ppc custom kernels.
724 skeleton implementation of _configure_yaboot.
725 small fixes to other templates.
726
727 21 Jul 2005; Preston Cody <codeman@gentoo.org>
728 GenDialog updates. changed comment in IP.
729
730 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
731 src/GLIInstallProfile.py:
732 Fix codeman's screwup of changing the service seperator to ',' in the parser
733 without changing it in the serialization code! Also document this in a
734 comment so you find it easier. Everybody needs to make sure they update
735 their install profiles!
736
737 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
738 src/GLIArchitectureTemplate.py:
739 Fix casting of list to string and concat of None with string, as well as
740 commented prototype of checking that mounting actually worked (found a case
741 where mount can return success, but the mount won't be done).
742
743 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
744 src/templates/x86ArchitectureTemplate.py:
745 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
746 checking for the device, and sleeping 1 second each time.
747
748 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
749 src/templates/x86ArchitectureTemplate.py:
750 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
751 bootloader works again. Also rename _install_{grub,lilo} to
752 _configure_{grub,lilo} since they don't install the loaders anymore
753 themselves.
754
755 7 Jul 2005; Preston Cody <codeman@gentoo.org>
756 fix global USE flags to not include the arch types at the end.
757 updates to GenDialog and gli-d.
758
759 6 Jul 2005; Preston Cody <codeman@gentoo.org>
760 fixing bootloader code for no initrd and initrd->initramfs naming change.
761
762 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
763 Proper comments and parameters to GLIException in install_mta()
764 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
765 Add strip() to list_mirrors(), list_subarch_from_mirror() and
766 list_tarball_from_mirror() to eliminate blank last item.
767
768 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
769 Added stage3 generation code.
770
771 5 Jul 2005; Preston Cody <codeman@gentoo.org>
772 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
773 Mild changes to GenDialog.
774
775 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
776 Remove separate install step configure_rc_conf() since it's handled by
777 update_config_files()
778 Make a copy of newvalues in _edit_config() so quotes aren't added when the
779 function is called twice on the same file.
780
781 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
782 Missing \ in sed in _get_packages_to_emerge()
783 Removed explicit emerging of hotplug and no longer add it to the runlevel.
784 Check in _quickpkg_deps() to ignore blank package names returned from
785 _get_packages_to_emerge()
786
787 28 Jun 2005; Preston Cody <codeman@gentoo.org>
788 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
789 in the dialog.py gauge code.
790
791 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
792 Add code to update_config_files() to go through etc_files and update stuff.
793 Check to see that _etc_files['make.conf'] exists in get_make_conf()
794 Only use float() in partition xml parsing code if type == "free"
795
796 28 Jun 2005; Preston Cody <codeman@gentoo.org>
797 finished almost all internationalization of GenDialog.
798 attempt at fixing rc.conf function. moved 3 generate functions out of
799 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
800 added dialog.py to the fe/dialog directory so it actually gets used.
801
802 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
803 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
804
805 27 Jun 2005; Preston Cody <codeman@gentoo.org>
806 fix extra entry in list_mirrors()
807 beginning internationalization runthrough.
808
809 26 Jun 2005; Preston Cody <codeman@gentoo.org>
810 added dialog.py to /src temporarily until it gets accepted upstream.
811 fix for unused value in form in dialog.py and changed heights.
812 fix GenDialog forms.
813
814 25 Jun 2005; Preston Cody <codeman@gentoo.org>
815 Changed hostname/domainname for new baselayout.
816 Changed _add_to_runlevel errors to logs.
817 Updated TODO list to show status of GenDialog
818 More updates to GenDialog including two checklists that probably won't work.
819 update IP to use comma-separated list instead of space separated for services.
820
821 24 Jun 2005; Preston Cody <codeman@gentoo.org>
822 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
823 GenDialog as it gets closer to completion.
824
825 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
826 Modify get_eth_info() to take a full interface name (eth0 fex). float()
827 instead of int() in add_partition_device_partition() for minor (closes 96804)
828
829 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
830 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
831 instead of 'interfaces[interface][1]' since DHCP uses that field for its
832 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
833
834 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
835 Apply spawn() patch from #96644 (with minor changes). Make sure the return
836 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
837 small error with <pipe>.close() returning None. Fix space vs. tab issue.
838 Fix undefined variable 'output' issue in spawn().
839
840 20 Jun 2005; Preston Cody <codeman@gentoo.org>
841 More updates to GenDialog and gli-d.
842
843 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
844 Modify list_mirrors() to return a list of mirror URL/name pairs.
845
846 19 Jun 2005; Preston Cody <codeman@gentoo.org>
847 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
848 get subarch.
849
850 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
851 Backend partitioning will create disklabel is none exists. Installprofile
852 defaults to "" now instead of "msdos" for disklabel type. Fix for
853 mount_local_partitions() to remember device along with minor in the
854 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
855 add else block to log unsupported netmount types to mount_network_shares()
856
857 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
858 src/GLIArchitectureTemplate.py:
859 Refactor kernel_compile common stuff, fix 2.4 build process.
860 src/fe/cli/clife.py:
861 Logging system.
862 src/GLIUtility.py, src/GLIStorageDevice.py:
863 Add comments about re-writes needed for boxes without sysfs.
864
865 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
866 src/GLIArchitectureTemplate.py:
867 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
868 'make dep' call for custom compile. build_mode support for prepare-only and
869 none types completed. custom compile function chains shell functions in
870 spawned script, to allow for catching all errors.
871
872 15 Jun 2005; Preston Cody <codeman@gentoo.org>
873 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
874 and GenDialog. other gendialog updates as well. kernel updates untested.
875
876 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
877 src/GLIInstallProfile.py:
878 Change structure of etc-portage stuff. The serialization was broken before my
879 last commit, and I am the only person that's ever used it. The new schema is
880 as follows:
881 <etc-portage>
882 <file name="package.mask"/>
883 <file name="package.unmask">
884 <entry atom="sys-kernel/openmosix-sources"/>
885 </file>
886 <file name="package.use">
887 <entry atom="sys-libs/db">
888 -java
889 </entry>
890 <entry atom="dev-libs/cyrus-sasl">
891 -ldap
892 </entry>
893 </file>
894 </etc-portage>
895
896
897 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
898 src/GLIInstallProfile.py:
899 Add new entry for gli-profile/kernel-build-method item. Add missing
900 serialize_etc_portage (temporary). Make serialize_make_conf always print the
901 keys in the same order.
902
903 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
904 src/GLIArchitectureTemplate.py:
905 Clean up commenting used by _edit_config(), and fix bug where wrong comment
906 was repeatedly appended to make.conf.
907
908 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
909 src/GLIArchitectureTemplate.py:
910 Put some Linux-2.6 specific code under a if statement. Store list of
911 successfully mounted swap device for using swapoff. Add proper error checking
912 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
913 'file'. Clean up some redundant code (thanks to pychecker).'
914
915 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
916 Fix typos: get_extended() instead of get_extended_partition(). Added
917 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
918 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
919
920 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
921 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
922 in add_network_interface.
923
924 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
925 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
926 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
927 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
928 prepare_chroot.
929
930 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
931 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
932 +src/fe/installer-gtk:
933 Add new automated CLI frontend. Add scripts that are the intended means to
934 use each frontend.
935
936 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
937 src/GLIClientController.py:
938 Add null type to network config, for cases where the interface is already up
939 and should not be touched (netboot for example).
940
941 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
942 src/GLIArchitectureTemplate.py:
943 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
944 string!. Try to use binary packages if available by default.
945
946 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
947 src/GLIArchitectureTemplate.py:
948 More error checking for _add_to_runlevel, to ensure that the init script
949 actually exists before we try to add it. set_services phase must take place
950 after the package installation, otherwise the init scripts might not exist.
951 Find the correct init script for the cron and logging daemons, and add that
952 instead of the package atom.
953
954 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
955 src/GLIArchitectureTemplate.py:
956 Fix up _edit_config so that it works if the file doesn't already exist. Fix
957 usage of 'file' to 'contents' for the variable name, as it shadows
958 __builtin__.file.
959
960 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
961 src/GLIArchitectureTemplate.py:
962 Add MTA install code, and include MTA install phase. Ensure
963 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
964 for 'none' kernel config for build_kernel phase. Put kernel_script in
965 /var/tmp instead of /root for build_kernel phase.
966
967 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
968 Rename mta variables to match syslog/cron variables.
969
970 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
971 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
972 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
973 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
974 src/templates/.cvsignore, src/tests/.cvsignore:
975 Refactor partition formatting again to include error checking. Allow 'none'
976 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
977
978 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
979 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
980 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
981 only have a single spawn call.
982
983 11 Jun 2005; Preston Cody <codeman@gentoo.org>
984 refixed samyron's fix of set_architecture_template.
985
986 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
987 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
988 be executable.
989
990 10 Jun 2005; Scott Myron <samyron@gentoo.org>
991 Fixed one of the FIXME's in the ClientConfiguration. There is now some
992 error checking when you call set_architecture_template.
993
994 10 Jun 2005; Preston Cody <codeman@gentoo.org>
995 moved the mkfsopts input to the partition options menu instead of the during
996 the creation process. updated GenDialog to say it supports reiserfs v3.
997
998 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
999 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1000 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1001 Add support for other partition types to dialogfe.
1002 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1003 avoid integer overflows and wraparounds.
1004
1005 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1006 Removed start/end from XML output and added mkfsopts to partitioning info.
1007 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1008 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1009 in GLIClientConfiguration. Change from .1 and .9 to constants for
1010 partitioning. Fix free space overwriting bug. Remove a few unused functions
1011 from rewrite. Fix call to get_partition_at()
1012
1013 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1014 Updates to GenDialog and dialogfe.
1015
1016 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1017 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1018
1019 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1020 more GenDialog updates to partitioning.
1021
1022 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1023 Indenting issue in GLISD/get_ordered_partition_list.
1024 updates to GenDialog partitioning and added default UTC for timezone in IP.
1025
1026 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1027 Added GLISD.get_model()
1028
1029 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1030 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1031 More updates to GenDialog :)
1032
1033 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1034 Added get_interface_realname() function.
1035
1036 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1037 Added auto-save of CConfig and copying to new /root after install.
1038 yet even more GenDialog updates.
1039
1040 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1041 removed print statement from GLISD. more updates to GenDialog.
1042
1043 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1044 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1045 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1046 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1047 places in GLIClientConfiguration.
1048
1049 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1050 Fix mount_local_partitions(), configure_fstab(), and
1051 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1052 A few more fixes for templates/x86Archtemplate
1053
1054 27 May 2005; Preston Cody <codeman@gentoo.org>
1055 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1056 a work in progress.
1057
1058 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1059 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1060 directly. GLISD can now handle data imported from XML.
1061
1062 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1064 handle blank (no disklabel) disks.
1065
1066 20 May 2005; Preston Cody <codeman@gentoo.org>
1067 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1068 up, documented, and separated out serialization and grouped all sections.
1069
1070 19 May 2005; Preston Cody <codeman@gentoo.org>
1071 Reorganization of ClientConfiguration and gutting of unused functions.
1072 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1073
1074 18 May 2005; Preston Cody <codeman@gentoo.org>
1075 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1076
1077 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1078 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1079 partitioning. CC serializes install profile to disk and prepare_chroot()
1080 copies it into /mnt/gentoo/root
1081
1082 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1083 Moved URI parsing into new function parse_uri()
1084
1085 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1086 Added XMLParser module.
1087
1088 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1089 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1090 Minor fix to is_uri() regex to allow hyphens in hostname.
1091
1092 12 May 2005; Preston Cody <codeman@gentoo.org>
1093 Updated finishing_cleanup for new unmounting method from agaffney.
1094
1095 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1096 Fix GLILogger to use correct time format string. Fix _edit_config() to
1097 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1098 unicode support to is_realstring().
1099
1100 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1101 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1102 return value instead of non-zero. Add code to output a traceback to the
1103 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1104 instead of --nocolor.
1105
1106 10 May 2005; Preston Cody <codeman@gentoo.org>
1107 Added GLIGenDialog.py to make a generic class for the dialog functions that
1108 can be used by both dialogfe and the netfe/be. updated both for new filename.
1109 date changes. 2004->2005.
1110
1111 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1112 Removed 'quiet=True' from spawn() calls
1113
1114 10 May 2005; Preston Cody <codeman@gentoo.org>
1115 Updated GLIUtility with patches from chotchki. Also added documentation
1116
1117 9 May 2005; Preston Cody <codeman@gentoo.org>
1118 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1119 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1120 from bug #89683, mostly touchups.
1121
1122 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1123 GLIStorageDevice cleanup patch from bug #91761
1124
1125 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1126 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1127 _edit_config(). Error logging casts 'error' to str
1128
1129 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1130 Exceptions received in CC are logged before being passed to the FE. Added
1131 code to CC to handle exceptions *not* thrown by the installer itself.
1132
1133 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 get_max_mb_for_resize() returns -1 if not self.resizeable
1135
1136 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1137 More dirty rsync hacks :-/
1138
1139 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1140 Patches from chotchki (bug #90325) to improve CC networking. untested.
1141
1142 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1143 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1144 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1145 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1146 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1147 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1148 _get_packages_to_emerge()
1149
1150 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1151 Added group-adding code to set_users in ArchTemplate
1152
1153 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1154 Added post-install script code
1155
1156 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1157 Fixed encapsulation issues in GLIClientController (bug #90141)
1158
1159 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1160 Update resizing code in GLIStorageDevice
1161
1162 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1163 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1164
1165 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1166 Reverted change to ArchTemplate and added support for commented line in old
1167 code.
1168
1169 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1170 Changed _edit_config() to modify value in-place instead of commenting out and
1171 adding the new value to the end of the file.
1172
1173 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1174 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1175 Also updated TODO list.
1176
1177 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 Use blackace's one-liner to add comments for all function for use with
1179 pythondoc.
1180
1181 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1182 Moved 'end >= device_sectors' check out of loop to check for next partition's
1183 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1184 Partitioning code now tracks start/end of extended for placing logicals. End
1185 point of logical is now adjusted along with start.
1186
1187 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1188 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1189 the way of partitioning from a blank disk. Add int() around access to minor
1190 key in partition information due to new partition code leaving them as float.
1191
1192 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1194
1195 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1196 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1197
1198 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1199 Added support for DHCP options and MAC addresses in the InstallProfile.
1200
1201 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1202 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1203 sed to properly strip out junk.
1204
1205 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1206 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1207 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1208
1209 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1210 Fixed indent problem in GLICController
1211
1212 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1213 Check for disklabel type "loop" and use the device name without a minor.
1214
1215 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1216 Remove /tmp/compile_output.log and /var/log/install.log when install is
1217 complete. Added code to (hopefully) keep 2nd thread running after install.
1218 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1219 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1220 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1221
1222 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1223 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1224 when unpacking tarball.
1225
1226 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1227 rewrote filesystem_tools. looks like it works so ripping out all the old
1228 filesystem_tools code.
1229
1230 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1231 Changed the print statements to logging in the partitioning BE code.
1232 the logger may need to be imported to the x86archtemplate. unknown yet.
1233 Added the finishing_cleanup function.
1234 added a fix to the logger from BenUrban
1235
1236 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1237 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1238 URIs. The blank uri check has been commented out.
1239 ripped out error checking of set_services. this is done by _add_to_runlevel.
1240
1241 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1243
1244 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1245 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1246 the install profile if available. Commented out spawn() debugging prints
1247
1248 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1249 small changes to setup_network_post. moved adding to runlevel of net.x to
1250 after the device gets symlinked. added domainname runlevel command.
1251
1252 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1253 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1254 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1255 spawn() call in livecd-kernel code to pass environment variables.
1256 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1257 the install profile if available.
1258
1259 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1261 to handle installing the livecd kernel into the new system.
1262
1263 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1264 should emerge hotplug and coldplug before adding them to runlevel.
1265
1266 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1267 took chroot out of grub_install command.
1268
1269 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 Changed chroot wrapper code in spawn() to write the wrapper the python way
1271 instead of the bash way to avoid quote conflicts. Added
1272 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1273 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1274 as it breaks the piping.
1275
1276 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1277 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1278
1279 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1281 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1282 GLIInstallProfile.
1283
1284 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1285 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1286 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1287 into /mnt/gentoo in prepare_chroot()
1288
1289 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1290 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1291 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1292 to start/end sectors
1293
1294 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1295 Add 2>&1 to cmd in spawn()
1296
1297 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Modified GLIUtility.exitsuccess() to work with return value from
1299 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1300 creates wrapper script for commands run inside chroot so multiple commands
1301 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1302 for the generated script from spawn()
1303
1304 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1305 Removed default values for stage tarball URI and portage tree URI from
1306 InstallProfile. These should be set by the FEs. also added services step to
1307 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1308 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1309
1310 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1311 Small fix for setting the default gateway. Also added feature to dialogfe.
1312
1313 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1314 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1315
1316 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1317 Fixed a bunch of true -> True typos. lots of em
1318 only write new resolv.conf if there are dns servers listed.
1319
1320 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Commented out 'display_on_tty8=True' in start_portmap()
1322
1323 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1324 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1325
1326 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1327 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1328 lang parameter to __init__()
1329
1330 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1331 updates to TODO list.
1332
1333 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Initial code for quickpkg GRP support. Fix loop to grab packages from
1335 'emerge -p blah'
1336
1337 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1338 check for dhcp in the network stuff and emerge it if it is.
1339 added quickpkg to TODO list
1340
1341 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1342 Changed the raising of 'warning' exceptions to a simple log of the error
1343 so that the installer can continue.
1344
1345 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1346 Some big changes. First, changed most output to display_on_tty8.
1347 Second, added log lines to all templates. Some smaller fixes such as typos.
1348 Also did some cleanups of old commented lines.
1349
1350 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1352 Undo change with fix. Escaping fix in GLIStorageDevice.py
1353
1354 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1355 more updates to TODO list. hopefully we'll soon start removing items instead
1356 of adding them.
1357
1358 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1359 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1360
1361 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1362 updated TODO list. (again)
1363
1364 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1365 changed output of portmap start to display_on_tty8.
1366 fixed bootloader for udev and multiple kernels
1367 fixed custom kernel config (again)
1368
1369 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1370 changed default value of CC._enable_ssh to True because this is smart.
1371 added code to allow custom kernel .config. may be unstable and break. sorry.
1372
1373 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 partition() now waits until after it checks for partition flags before delete
1375 the partitions :P
1376
1377 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1379 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1380 blank.
1381
1382 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1383 Various fixes related to the add_users function. Still not yet finished.
1384 Added things to the TODO list. Lets start using that!
1385
1386 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 Added code to x86Template to format newly created partitions. Also added
1388 some error checking code. GLIStorageDevice passes 'minor' with data to
1389 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1390 mounting code.
1391
1392 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1393 Took out unnecessary setting of random livecd root password. the cd already
1394 sets it randomly.
1395
1396 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1397 Took out an unneeded step from CC's run()
1398
1399 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1400 Attempt at detecting and adding windows partitions to lilo.
1401
1402 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1403 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1404 partition. fixed misc exit_status => exitstatus typo.
1405
1406 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1407 Added basic code for resizing filesystems with pyparted. Fixed code for
1408 resizing ntfs and ext2/3.
1409
1410 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1411 Fixed partition() in x86Template so that it scans through logicals and deletes
1412 before deleting containing extended partition. Also clears partition table to
1413 be safe before third pass.
1414
1415 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1416 Added mount_network_shares. not able to test it from this computer.
1417 will test when i get back to school.
1418 also added start_portmap to the client_controller as an always-do.
1419 agaffney says this is needed for NFS mounts to work.
1420
1421 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1422 Partial rewrite of partitioning code in x86Template. No longer shells out to
1423 parted to perform actions, now uses all pyparted calls. Code "works" in a
1424 test, but still needs lots of TLC. Also modified tests/install.py to work
1425 with x86Template and GLIClientConfiguration.
1426
1427 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1428 Initial move of partitioning code from ArchTemplate to x86Template.
1429
1430 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1431 Added grp_install and services to InstallProfile. forgot about the set_root_password
1432
1433 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1434 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1435 Test Install ran very well (skipping partitioning).
1436
1437 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1438 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1439 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1440 some may still have eluded me.
1441
1442 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1443 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1444 Just finished mount_local_partitions in GLIArchitectureTemplate
1445
1446 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1447 Added get_num_sectors() to GLIStorageDevice.
1448
1449 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1450 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1451 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1452 from GLIInstallProfile.
1453
1454 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1455 GLIStorageDevice returns "unknown" instead of "" for get_type()
1456
1457 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1458 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1459 actually work. Commented out resizability checking code for speed.
1460
1461 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1462 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1463 GLIStorageDevice at the suggestion of plors
1464
1465 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1466 Added a function to GLIUtility to pull a value from a make.conf-style config
1467 file. Minor type fix to GLIInstallProfile.py
1468
1469 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1470 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1471 network mounts from partition data structure in GLIInstallProfile
1472
1473 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1474 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1475 can be resized.
1476
1477 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1478 Added some of the final functions to GLIInstallTemplate.
1479 Yes this project is still active despite rare use of the Changelog!
1480
1481 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1482 Added the GLIPartitionTools.py file. This is a temporary insertion of
1483 partitioning tools that will eventually go into their own package.
1484
1485 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1486 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1487 for the program). Added __init__(install_profile, client_configuration) to
1488 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1489 to avoid constantly passing stuff every time we call a method.
1490
1491 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1492
1493 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1494 files without messing up all the other stuff in them. This will be used for making
1495 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1496
1497 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1498
1499 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1500 have a few basic things. I added two private methods. One is _depends(). This
1501 will be used for dependency checking (ie. unpacking a tarball requires that
1502 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1503 same syntax as os.system(), however, instead of being run in the liveCD
1504 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1505 isolated the code. Hope to work more this week to get this class formed...
1506
1507 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1508
1509 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1510 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1511 to allow for easier modification (mutable, rather than immutable objects). Updated
1512 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1513 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1514 Added initial unit test code.
1515
1516 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1517
1518 Added initial changelog. Setting up the basic structure of the CVS repository
1519 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1520 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20