/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1195 - (show annotations) (download)
Mon Dec 26 06:57:47 2005 UTC (8 years, 10 months ago) by agaffney
File size: 63422 byte(s)
chroot to use best_version for chroot's vdb

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.550 2005/12/26 06:57:47 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 exclude packages already in chroot vdb from binary deplist
11 chroot to use best_version for chroot's vdb
12
13 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
14 src/runtimedeps.py:
15 remove passing of ROOT
16 src/GLIPortage.py:
17 modify get_deps() to get deptree for each package and merge into final list
18 remove depgraph class
19 add debugging code to get_deps()
20 src/GLIArchitectureTemplate.py:
21 combine code for GRP/compile in install_packages() into one block
22 debugging code in install_packages()
23
24 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
25 src/runtimedeps.py:
26 initial commit
27 src/GLIPortage.py:
28 use separate script for GRP deps
29 remove calls to portage module
30
31 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
32 src/GLIPortage.py:
33 initial commit
34 move some of portage function from GLIAT
35 flipped around a few function args
36 src/GLIArchitectureTemplate.py:
37 revamp install_packages() for new GLIPortage
38
39 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIArchitectureTemplate.py:
41 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
42
43 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
44 src/net/server/gliserv.py:
45 wrap generated code in a class to isolate it a bit better
46 302 redirects work
47 don't use cgi.escape() for <% %>
48 src/net/server/html/webgli/*:
49 load/save profile
50 src/GLIUtility.py:
51 change /sbin/lspci to just lspci
52
53 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
54 src/GLIClientController.py:
55 change ordering of statements in CC run() while loop to not go past the end
56 of the array
57 src/GLIArchitectureTemplate.py:
58 removed redundant bind mounts
59
60 18 Dec 2005; Preston Cody <codeman@gentoo.org>
61 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
62 added a diagram by blackace from last night.
63 added the glossary in RTF format.
64
65 17 Dec 2005; Preston Cody <codeman@gentoo.org>
66 x86AT: separated out emerge/configure from running of bootloader
67 added MBR drive support to lilo.
68 these changes will likely not work.
69 AT: added setup_and_run_bootloader step.
70
71 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
72 src/net/server/gliserv.py:
73 call generated code in a function
74 src/net/server/html/webgli/*:
75 include top/bottom
76 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
77 src/GLIClientCongifuration.py:
78 install mode magic
79
80 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
81 src/GLIClientController.py:
82 use GLIException when there's an import problem
83 added debug code to show install_steps
84 src/templates/amd64ArchitectureTemplate.py:
85 add . to import path
86 proper path this time: ../../templates
87 src/GLIArchitectureTemplate.py:
88 add _portage_best_version() function
89
90 11 Dec 2005; Preston Cody <codeman@gentoo.org>
91 added initial glossary and gimli diagram to the docs directory.
92 modify gli-dialog to allow editing of the install_profile after loading XML.
93
94 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
95 src/net/server/html/webgli/:
96 converted globaluse, localuse, networkmounts, portagetree, and stageselection
97 moved saveclientconfig stuff into clientconfig
98 moved saveconfigfiles into config files
99 converted etc_portage and makedotconf
100 converted bootloader and kernel
101 convert daemons, extrapackages, networking, review, services, timezone, users
102 src/net/server/gliserv.py:
103 proper 404 handling for .pyhtml extension
104 HTML escape <% %> stuff
105 work around python's sucky regexes
106 src/GLIInstallProfile.py:
107 allow set_{rsync,ftp,http}_proxy() to accept empty values
108
109 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
110 src/net/server/gliserv.py:
111 initial commit of Legolas templating engine
112 302 redirects
113 src/net/server/html/index.html, src/net/server/webgli_template.html:
114 minor changes for new code
115 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
116 initial commit of the conversion from the monolithic WebGLIHandler.py to the
117 one file per path Legolas goodness
118 partitioning[2-4] done
119
120 5 Dec 2005; Preston Cody <codeman@gentoo.org>
121 webgli: dhcp options in CC and post-install.
122 updated comparison chart.
123 webgli: etc/portage/* and distcc support added. not too-well tested.
124
125 4 Dec 2005; Preston Cody <codeman@gentoo.org>
126 webgli_template.html: valign=top on left side.
127 webgli: fix bootloader boot_device. now working.
128 webgli: CC proxy done. post-install proxy in progress.
129
130 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
131 src/net/server/webgli_template.html:
132 increase padding for content cell to 7px and add colspan=2
133
134 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
135 webgli: added graphic bar on top
136 webgli: added hover effects on the links on the left
137 webgli: re-rendered header_bg.png to stretch without artifacts
138
139 3 Dec 2005; Preston Cody <codeman@gentoo.org>
140 webgli: make.conf disabling fixes for dynamic_stage3
141 fixed portage snapshot browse popup
142 all changes tested.
143 webgli: add debug mode to CC screen. the screen still needs lots of work.
144
145 1 Dec 2005; Preston Cody <codeman@gentoo.org>
146 added debug mode question to gli-dialog
147 added CC proxies to CC networking for gli-dialog
148 webgli: fixed skip CC networking if connection active
149 webgli: portage snapshot defaults to CD
150 webgli: bootloader mbr drive selection
151 webgli: USE flags unselectable if dynamic_stage3
152 webgli: manual extra packages and save button.
153
154 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
155 src/GLIUtility.py:
156 change ping count to 2
157 docs/comparison.html
158 initial commit
159
160 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
161 src/templates/x86ArchitectureTemplate.py:
162 fix map() issue with grub code
163 replace kernel_names and initrd_names loops with one-liners
164
165 27 Nov 2005; Preston Cody <codeman@gentoo.org>
166 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
167 initial gli-dialog support for recommended partitioning layout and clear.
168 failure cleanup now an option for gli-dialog.
169 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
170 added comparison list and updated TODO!
171
172 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
173 src/GLIArchitectureTemplate.py:
174 fix to stage1() debug code
175 fix to stage2() debug code
176
177 26 Nov 2005; Preston Cody <codeman@gentoo.org>
178 some more bootloader code fixes. forgot boot_device != mbr_device.
179
180 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
181 src/GLIStorageDevice.py:
182 fix to unallocated space merging when last one is after part 4
183
184 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
185 src/GLIArchitectureTemplate.py:
186 small fix to debugging code in copy_pkg_to_chroot()
187
188 23 Nov 2005; Preston Cody <codeman@gentoo.org>
189 more bugfixes with bootloader code
190 gli-dialog side appears to work
191
192 21 Nov 2005; Preston Cody <codeman@gentoo.org>
193 initial adding of boot_device to backend.
194 initial boot_device support added to gli-dialog.
195 some fixes of my poor coding
196
197 20 Nov 2005; Preston Cody <codeman@gentoo.org>
198 converted gli-dialog to use the install_package_list.
199 gtkfe has already been converted by AllanonJL
200 new way working in gli-dialog now and added to webgli.
201 added set/get_boot_device() to IP
202
203 19 Nov 2005; Preston Cody <codeman@gentoo.org>
204 get_install_package_list added to InstallProfile. This can be used by the FEs
205
206 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
207 src/templates/x86ArchitectureTemplate.py:
208 call ls with '-1 --color=no'
209
210 16 Nov 2005; Preston Cody <codeman@gentoo.org>
211 added warning (#9) to GRP ppl about stage3 tarballs
212
213 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIArchitectureTemplate.py:
215 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
216 confused
217
218 13 Nov 2005; Preston Cody <codeman@gentoo.org>
219 removed protocols from rc.conf screens
220 finished initial rc.conf and make.conf in webgli
221
222 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
223 src/net/server/gliserv.py:
224 add -h option to usage()
225 show time and request URI in debug mode
226 show client IP in debug mode
227 just use IP instead of trying to do a reverse lookup
228
229 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
230 src/net/server/gliserv.py:
231 'classier' 401 message
232 proper commandline parsing
233 help via -h
234 user/pass can be specificed via commandline option
235
236 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
237 src/net/server/gliserv.py:
238 basic HTTP auth
239
240 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
241 src/net/server/gliserv.py:
242 dynamic module reloading (yipee!)
243 send 'Last-Modified' header for real files
244 respond to HEAD with just headers
245 src/net/server/handlers/WebGLIHandler.py:
246 icons for drives
247
248 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
249 src/net/server/handlers/WebGLIHandler.py:
250 initial 'pretty' partition table display support
251 clicking partition in 'pretty' display works instead of radio buttons
252 radio buttons and pretty display work together
253 META redirect instead of javascript
254 pretty display stretches across entire screen
255 'Recommended layout' and 'Clear drive' functions
256 properly catch exceptions from do_recommended()
257 src/GLIArchitectureTemplate.py:
258 replace preinst, copy, postinst, rm steps with qmerge
259 whoops...that shouldn't have been commented out
260 create image_dir with -p in copy_pkg_to_chroot()
261 more generic of symlink crappiness
262 new copy_pkg_to_chroot() actually works now
263
264 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
265 src/GLIStorageDevice.py:
266 initial generic disk support
267 fixes for add_partition() code
268 src/net/server/handlers/WebGLIHandler.py:
269 added support for creating generic disks
270 add new partition working
271 save and delete partitions
272
273 6 Nov 2005; Preston Cody <codeman@gentoo.org>
274 webgli: Partitioning making progress.
275
276 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
277 src/GLIArchitectureTemplate.py:
278 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
279 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
280 dir) and works around /etc/gconf symlink problem
281
282 5 Nov 2005; Preston Cody <codeman@gentoo.org>
283 webgli: lots of updates. preliminary partitioning. extra packages works.
284
285 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
286 src/net/server/gliserv.py:
287 httpd now supports HTTPS and falls back to HTTP if not available
288 make fallback actually work
289 src/net/server/SecureXMLRPCServer.py:
290 SecureSocketServer is now threaded
291
292 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
293 src/net/client/gliclient.py:
294 try to use HTTPS for XMLRPC first and fallback to HTTP
295 pretend mode
296 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
297 HTTPS XMLRPC goodness from samyron
298 pass name of certificate
299
300 31 Oct 2005; Preston Cody <codeman@gentoo.org>
301 wegli: daemons and services screens done.
302
303 30 Oct 2005; Preston Cody <codeman@gentoo.org>
304 webgli: networking and users screens
305 added return_redirect to handler.py
306 loading and saving install/client profiles works for webgli now
307 Review also done
308
309 *GLI-0.2 (27 Oct 2005)
310
311 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
312 src/templates/x86ArchitectureTemplate.py:
313 properly check for bootloader emerge exist status with exitsuccess()
314 log output of grub install command
315 add --batch --no-floppy to grub command
316 grubinstallstring only gets logged if debug is on
317 src/GLIUtility.py:
318 update progress bar to 100% when process finishes
319
320 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
321 src/GLIClientController.py:
322 added debugging code for the interaction between the 2 threads via Event()
323 src/GLIUtility.py:
324 doubled the buffer size in spawn()
325 bump buffer size up to 16384
326 only report progress in 5% increments
327 src/GLIArchitectureTemplate.py:
328 kernelpkgs.txt support code
329 above disabled because it sucks
330 added add_pkg_to_world()
331
332 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIArchitectureTemplate.py:
334 use tar | tar to copy files in copy_pkg_to_chroot()
335 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
336
337 23 Oct 2005; Preston Cody <codeman@gentoo.org>
338 DEBUGGING ADDED TO AT. verbose field added to CConfig.
339
340 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
341 src/net/server/gliserv.py:
342 / maps to index.html
343 look for actual files in html/
344 src/net/html:
345 new template
346 src/GLIUtility.py:
347 added parse_vdb_contents()
348 src/GLIArchitectureTemplate.py:
349 added copy_pkg_to_chroot()
350 added debug code to dynamic-stage3
351 switch dynamic-stage3 to new method
352 lots of bug fixes from adding debug code
353
354 22 Oct 2005; Preston Cody <codeman@gentoo.org>
355 webgli initial bootloader support + changed make.conf.
356 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
357
358 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
359 src/GLIUtility.py:
360 horrible tangled mess of code that is tarball unpacking subprogress display
361 add unpack progress to portage snapshot
362 use read() instead of readlines() in spawn()
363 only update progress bar for whole percents
364
365 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
366 src/templates/x86ArchitectureTemplate.py:
367 change call to 'grub' to use GLIUtility.exitsuccess()
368 add definition of 'build_mode' in _configure_lilo()
369 src/misc/updategtkfe, src/misc/updateglid:
370 fix so subshell is called in root shell
371
372 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
373 src/net/server/handlers/WebGLIHandler.py:
374 stage screen launches URI browser in sized window with various properties set
375
376 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
377 src/misc/updategtkfe:
378 updated to actually work
379 remove previous snapshot and extracted dir before downloading
380 src/misc/updateglid:
381 updated to actually work
382 src/templates/x86ArchitectureTemplate.py:
383 fixed bug where grub code was looking for 'root+root+file_name2'
384
385 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
386 src/net/server/handlers/WebGLIHandler.py:
387 URI browser
388 added mirror selection
389 src/GLIUtility.py:
390 ls via ssh strips off ending *
391
392 16 Oct 2005; Preston Cody <codeman@gentoo.org>
393 more updates to webgli. stage selection.
394
395 11 Oct 2005; Preston Cody <codeman@gentoo.org>
396 updated webgli with preliminary Network Mounts support.
397
398 9 Oct 2005; Preston Cody <codeman@gentoo.org>
399 GenDialog: string formatting and yes/no label fixes.
400 added WebGLI template for gliserv.py
401 added WebGLIHandler as well as a definition for it in gliserv.py
402 updates to the webgli files even though they won't be there for long.
403 Utility: remove exception for non-existant grppkgs.txt until the new livecd
404 goes public.
405
406 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
407 src/net/server/gliserv.py:
408 override dict to not be so anal
409 main server now loads separate module to handle requests
410 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
411 split out profile URLs into separate handler function
412 move handlers into subdirectory
413 add Welcome and Clients handlers
414
415 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
416 src/GLIUtility.py:
417 raise exception if password prompt received twice
418
419 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
420 src/GLIUtility.py:
421 removed rot13ify()
422
423 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
424 src/net/server/gliserv.py:
425 allow for param to be passed multiple times in GET
426 no XMLRPC functions return None
427 modify POST request parsing to only create a list if needed
428 fix GET request parsing so the list creation for multiple values works
429 src/net/client/gliclient.py:
430 various typo and type mismatch fixes
431 exit after exception
432
433 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
434 src/net/client/gliclient.py:
435 initial commit
436 pass MAC to XMLRPC functions
437 src/net/server/GLIServerProfile.py:
438 rename GLIClientsProfiles to GLIServerProfile
439
440 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
441 src/net/server/gliserv.py:
442 now handles POST requests
443 move majority of request handling code to common_handler() to reduce code
444 duplication
445 profile loading
446 client reg via XMLRPC goes into SharedInfo()
447 /showclients redesign
448 template fixes
449 allow handler functions to add/change headers
450 save profile
451
452 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
453 src/net/server/GLIClientsProfiles.py:
454 initial commit
455 src/net/server/template.html:
456 initial commit
457 src/net/server/gliserv.py:
458 add template mojo
459
460 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
461 src/net/server/gliserv.py:
462 XMLRPC mojo
463
464 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
465 src/GLIArchitectureTemplate.py:
466 add code in _edit_config() to comment line where variable is defined
467 previously
468 insert new line under previous definition of variable if it exists
469 small _edit_config() cleanup
470 src/GLIStorageDevice.py:
471 add clear_partitions() function
472 new sizes for recommended partition layout
473 automatically calculate swap size for recommended layout
474
475 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
476 src/templates/x86ArchitectureTemplate.py:
477 fat16 mojo
478
479 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
480 src/GLIStorageDevice.py:
481 prevent do_recommended() from being run twice
482 rewrite do_recommended() to be more robust
483 src/GLIArchitectureTemplate.py:
484 rework _edit_config() to not write duplicate entries
485
486 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
487 src/GLIStorageDevice.py:
488 added do_recommended() function to automatically created 256M/1G/* layout
489
490 17 Sep 2005; Preston Cody <codeman@gentoo.org>
491 src/gli-dialog.py: added set_distcc to the list
492 GenDialog: added set_distcc. untested.
493 IP: added install_distcc flag.
494 AT: added install_distcc function based on the flag. runs after build_kernel
495 changed AT spawn command for distcc for nodeps.
496
497 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
498 src/GLIUtility.py:
499 add rot13ify() function
500
501 16 Sep 2005; Preston Cody <codeman@gentoo.org>
502 src/GenDialog.py
503 added a sentence of text. unchecking support added.
504
505 15 Sep 2005; Preston Cody <codeman@gentoo.org>
506 src/GLIUtility.py
507 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
508 src/GenDialog.py
509 still working on extra_packages. transformed the list to new format.
510 added GRP indication to list. untested.
511 TODO lists updated.
512 src/fe/dialog/gli-dialog.py
513 spelling mistook.
514
515 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
516 src/GLIUtility.py:
517 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
518
519 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/GLIUtility.py:
521 add get_directory_listing_from_uri()
522 add http support to above
523 add ftp support to above
524 add scp support to above
525 src/GLIArchitectureTemplate.py:
526 "0" instead of 0 for key of single-element dict passed to _edit_config()
527
528 5 Sep 2005; Preston Cody <codeman@gentoo.org>
529 value_only -> only_value
530
531 3 Sep 2005; Preston Cody <codeman@gentoo.org>
532 gutted out all of etc_portage structure since it is now all handled by
533 etc_files
534
535 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
536 src/GLIArchitectureTemplate.py:
537 install_packages() sends progress update notifications
538 src/templates/x86ArchitectureTemplate.py:
539 increase sleep to 5s between format tries
540 src/GLIClientController.py:
541 pass 'self' to AT instead of 'self._pretend'
542
543 2 Sep 2005; Preston Cody <codeman@gentoo.org>
544 logger -> logger.log in x86AT
545
546 1 Sep 2005; Preston Cody <codeman@gentoo.org>
547 added set_etc_portage to IP. debugging gli-d's support for it.
548
549 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
550 src/templates/x86ArchitectureTemplate.py:
551 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
552
553 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
554 src/GLIArchitectureTemplate.py:
555 add _portage_best_version() function and rework install_packages() to allow
556 for future X of Y tracking
557 Use best_visible instead of best_version
558 tracked down and fixed missing = causing empty install extra packages
559 use = when emerging also
560 quickpkg hokey pokey
561 run _get_packages_to_emerge() again with -pk
562
563 22 Aug 2005; Preston Cody <codeman@gentoo.org>
564 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
565 the end of install_packages.
566 added updateglid to /src/misc
567 updated all core files with new GPL notice and copyright statement.
568
569 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
570 src/GLIUtility.py:
571 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
572 a snapshot in /mnt/cdrom/snapshots/
573 get_snapshot_from_cd() adds file:// at the beginning
574 change calls to extra package special case functions to 'self.blah'
575
576 21 Aug 2005; Preston Cody <codeman@gentoo.org>
577 src/ArchTemplate: changed "voodoo".
578 changed order of portage sync methods. made a fallback to webrsync if
579 normal emerge sync fails.
580 removed get_sources_from_cd because it is obsolete.
581 add special cases to install_packages. remove fatal exception on package
582 install failure b/c the box will still be bootable.
583 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
584 handled in the FEs.
585 src/GenDialog: added a bunch of code for dealing with x11-based packages.
586 awaiting testing.
587
588 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
589 src/GLIStorageDevice.py:
590 global try/except block around fs resizable detection code
591 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
592 install-failed cleanup function
593
594 18 Aug 2005; Preston Cody <codeman@gentoo.org>
595 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
596
597 16 Aug 2005; Preston Cody <codeman@gentoo.org>
598 GLIGenDialog:
599 add drive choices for loaded configs.
600 force snapshot for dynamic_stage3
601 init the snapshoturi input to the cd snapshot if not already selected.
602 if dynamic_stage3, skip the make.conf step.
603 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
604 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
605
606 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/GLIArchitectureTemplate.py:
608 manually call MAKEDEV in stage3-dynamic code
609 copy /etc/inittab.old to /etc/inittab in chroot
610 src/GLIUtility.py:
611 add beginning of validate_uri() function
612 add file:/// support to validate_uri()
613 single quotes when setting livecd password
614
615 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
616 src/GLIGenDialog.py:
617 change getmountpoint() to get_mountpoint()
618 src/misc/updategtkfe:
619 committed script to automatically download latest snapshot and run gtkfe
620 src/templates/x86ArchitectureTemplate.py:
621 fix _configure_lilo_add_windows() for IP -> GLISD stuff
622 src/GLIArchitectureTemplate.py:
623 give tmp_minor an initial value in mount_local_partitions so that the value
624 remain from the previous drive
625
626 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
627 src/templates/x86ArchitectureTemplate.py:
628 Fix _configure_lilo() for IP using GLISD stuff
629 src/GLIArchitectureTemplate.py:
630 install_cron_daemon() treats "none" specially
631
632 14 Aug 2005; Preston Cody <codeman@gentoo.org>
633 old patch from Steven Mertens to resolve bug #96642
634 numerous asthetic changes to GenDialog, no real functionality changes though.
635 strings renamed for global use if necessary.
636 fix all three parts of bug 102291
637 disable set_etc_portage until fully-written.
638
639 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
640 src/GLIClientController.py:
641 lower-case http/ftp proxy envvars
642
643 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
644 src/GLIClientController.py:
645 log end of pre_install steps to aid in debugging
646 src/templates/x86ArchitectureTemplate.py:
647 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
648
649 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
650 src/GLIArchitectureTemplate.py
651 check to make sure that the device node we're wait for to exist isn't of
652 type 'free'
653
654 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
655 src/GLIGenDialog.py:
656 convert install_packages to list in set_extra_packages()
657 check return code of checklist() call in "Manual" section
658 *actually* fix the first problem
659
660 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
661 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
662 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
663
664 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
665 src/GLIArchitectureTemplate.py:
666 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
667
668 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
669 Add CDATA support to SimpleXMLParser and add utility functions for it.
670
671 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
672 src/GLIArchitectureTemplate.py:
673 Fix case where vixie-cron is specified as a full package atom, as we still
674 don't want to run 'crontab /etc/crontab' for it.
675
676 *GLI-0.1 (3 Aug 2005)
677
678 30 Jul 2005; Preston Cody <codeman@gentoo.org>
679 add scp to list of is_uri() so GenDialog doesn't complain.
680 fixed livecd-kernel bug in bootloader code.
681 fixed gendialog for dynamic_stage3 instead of "networkless"
682 change bootloader to allow for both initrd and initramfs.
683 fix IP for dynamic_stage3.
684 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
685
686 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
687 Added full scp:// URI support to get_uri() in GLIUtility
688 Remove "networkless" from dynamic stage3 if locic.
689 Remove print statement from scp:// code.
690 Change scp code to check for "assword: " instead of "Password:"
691 Fix post-install network code to create net.eth1+ symlink correctly
692 Check to make sure pkg can be split on / and some debugging code
693 Add 2>dev/null to emerge call in _get_packages_to_emerge()
694 SimpleXMLParser handles True/False/None correctly now
695 Comment out above fix
696 Add partitioning wait-for-device-to-exist code to mount_local_partitions
697
698 28 Jul 2005; Scott Myron <samyron@gentoo.org>
699 Removed a FIXME in the GLIClientConfiguration that is no
700 longer needed.
701
702 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
703 Default to x86 in ClientConfig
704 Typo in build-a-stage3 code.
705 Remove MAKEDEV call in build-a-stage3 postscript.
706
707 26 Jul 2005; Preston Cody <codeman@gentoo.org>
708 Rewrote init of IP for gli-d. Other GenDialog updates.
709 allow network_type to be None in CConfig.
710
711 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
712 Add _dynamic_stage3 option to IP.
713 Add check for that option to dynamic stage3 code in ArchTemplate.
714 Fix code to determine default route in get_eth_info() in GLIUtility.
715 Fix serialization of dns-servers in ClientConfig.
716
717 24 Jul 2005; Preston Cody <codeman@gentoo.org>
718 changed default values of cron/logger in IP.
719 moved GenDialog IP init out to the individual files. gli-dialog's version
720 will change quite a bit.
721
722 22 Jul 2005; Preston Cody <codeman@gentoo.org>
723 added ppcArchTemplate. blank now. working on yaboot.
724 modified ArchTemplate for amd64 and ppc custom kernels.
725 skeleton implementation of _configure_yaboot.
726 small fixes to other templates.
727
728 21 Jul 2005; Preston Cody <codeman@gentoo.org>
729 GenDialog updates. changed comment in IP.
730
731 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
732 src/GLIInstallProfile.py:
733 Fix codeman's screwup of changing the service seperator to ',' in the parser
734 without changing it in the serialization code! Also document this in a
735 comment so you find it easier. Everybody needs to make sure they update
736 their install profiles!
737
738 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
739 src/GLIArchitectureTemplate.py:
740 Fix casting of list to string and concat of None with string, as well as
741 commented prototype of checking that mounting actually worked (found a case
742 where mount can return success, but the mount won't be done).
743
744 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
745 src/templates/x86ArchitectureTemplate.py:
746 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
747 checking for the device, and sleeping 1 second each time.
748
749 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
750 src/templates/x86ArchitectureTemplate.py:
751 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
752 bootloader works again. Also rename _install_{grub,lilo} to
753 _configure_{grub,lilo} since they don't install the loaders anymore
754 themselves.
755
756 7 Jul 2005; Preston Cody <codeman@gentoo.org>
757 fix global USE flags to not include the arch types at the end.
758 updates to GenDialog and gli-d.
759
760 6 Jul 2005; Preston Cody <codeman@gentoo.org>
761 fixing bootloader code for no initrd and initrd->initramfs naming change.
762
763 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
764 Proper comments and parameters to GLIException in install_mta()
765 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
766 Add strip() to list_mirrors(), list_subarch_from_mirror() and
767 list_tarball_from_mirror() to eliminate blank last item.
768
769 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
770 Added stage3 generation code.
771
772 5 Jul 2005; Preston Cody <codeman@gentoo.org>
773 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
774 Mild changes to GenDialog.
775
776 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
777 Remove separate install step configure_rc_conf() since it's handled by
778 update_config_files()
779 Make a copy of newvalues in _edit_config() so quotes aren't added when the
780 function is called twice on the same file.
781
782 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
783 Missing \ in sed in _get_packages_to_emerge()
784 Removed explicit emerging of hotplug and no longer add it to the runlevel.
785 Check in _quickpkg_deps() to ignore blank package names returned from
786 _get_packages_to_emerge()
787
788 28 Jun 2005; Preston Cody <codeman@gentoo.org>
789 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
790 in the dialog.py gauge code.
791
792 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
793 Add code to update_config_files() to go through etc_files and update stuff.
794 Check to see that _etc_files['make.conf'] exists in get_make_conf()
795 Only use float() in partition xml parsing code if type == "free"
796
797 28 Jun 2005; Preston Cody <codeman@gentoo.org>
798 finished almost all internationalization of GenDialog.
799 attempt at fixing rc.conf function. moved 3 generate functions out of
800 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
801 added dialog.py to the fe/dialog directory so it actually gets used.
802
803 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
804 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
805
806 27 Jun 2005; Preston Cody <codeman@gentoo.org>
807 fix extra entry in list_mirrors()
808 beginning internationalization runthrough.
809
810 26 Jun 2005; Preston Cody <codeman@gentoo.org>
811 added dialog.py to /src temporarily until it gets accepted upstream.
812 fix for unused value in form in dialog.py and changed heights.
813 fix GenDialog forms.
814
815 25 Jun 2005; Preston Cody <codeman@gentoo.org>
816 Changed hostname/domainname for new baselayout.
817 Changed _add_to_runlevel errors to logs.
818 Updated TODO list to show status of GenDialog
819 More updates to GenDialog including two checklists that probably won't work.
820 update IP to use comma-separated list instead of space separated for services.
821
822 24 Jun 2005; Preston Cody <codeman@gentoo.org>
823 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
824 GenDialog as it gets closer to completion.
825
826 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
827 Modify get_eth_info() to take a full interface name (eth0 fex). float()
828 instead of int() in add_partition_device_partition() for minor (closes 96804)
829
830 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
831 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
832 instead of 'interfaces[interface][1]' since DHCP uses that field for its
833 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
834
835 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Apply spawn() patch from #96644 (with minor changes). Make sure the return
837 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
838 small error with <pipe>.close() returning None. Fix space vs. tab issue.
839 Fix undefined variable 'output' issue in spawn().
840
841 20 Jun 2005; Preston Cody <codeman@gentoo.org>
842 More updates to GenDialog and gli-d.
843
844 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
845 Modify list_mirrors() to return a list of mirror URL/name pairs.
846
847 19 Jun 2005; Preston Cody <codeman@gentoo.org>
848 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
849 get subarch.
850
851 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
852 Backend partitioning will create disklabel is none exists. Installprofile
853 defaults to "" now instead of "msdos" for disklabel type. Fix for
854 mount_local_partitions() to remember device along with minor in the
855 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
856 add else block to log unsupported netmount types to mount_network_shares()
857
858 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
859 src/GLIArchitectureTemplate.py:
860 Refactor kernel_compile common stuff, fix 2.4 build process.
861 src/fe/cli/clife.py:
862 Logging system.
863 src/GLIUtility.py, src/GLIStorageDevice.py:
864 Add comments about re-writes needed for boxes without sysfs.
865
866 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
867 src/GLIArchitectureTemplate.py:
868 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
869 'make dep' call for custom compile. build_mode support for prepare-only and
870 none types completed. custom compile function chains shell functions in
871 spawned script, to allow for catching all errors.
872
873 15 Jun 2005; Preston Cody <codeman@gentoo.org>
874 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
875 and GenDialog. other gendialog updates as well. kernel updates untested.
876
877 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
878 src/GLIInstallProfile.py:
879 Change structure of etc-portage stuff. The serialization was broken before my
880 last commit, and I am the only person that's ever used it. The new schema is
881 as follows:
882 <etc-portage>
883 <file name="package.mask"/>
884 <file name="package.unmask">
885 <entry atom="sys-kernel/openmosix-sources"/>
886 </file>
887 <file name="package.use">
888 <entry atom="sys-libs/db">
889 -java
890 </entry>
891 <entry atom="dev-libs/cyrus-sasl">
892 -ldap
893 </entry>
894 </file>
895 </etc-portage>
896
897
898 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
899 src/GLIInstallProfile.py:
900 Add new entry for gli-profile/kernel-build-method item. Add missing
901 serialize_etc_portage (temporary). Make serialize_make_conf always print the
902 keys in the same order.
903
904 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
905 src/GLIArchitectureTemplate.py:
906 Clean up commenting used by _edit_config(), and fix bug where wrong comment
907 was repeatedly appended to make.conf.
908
909 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
910 src/GLIArchitectureTemplate.py:
911 Put some Linux-2.6 specific code under a if statement. Store list of
912 successfully mounted swap device for using swapoff. Add proper error checking
913 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
914 'file'. Clean up some redundant code (thanks to pychecker).'
915
916 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
917 Fix typos: get_extended() instead of get_extended_partition(). Added
918 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
919 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
920
921 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
922 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
923 in add_network_interface.
924
925 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
926 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
927 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
928 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
929 prepare_chroot.
930
931 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
932 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
933 +src/fe/installer-gtk:
934 Add new automated CLI frontend. Add scripts that are the intended means to
935 use each frontend.
936
937 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
938 src/GLIClientController.py:
939 Add null type to network config, for cases where the interface is already up
940 and should not be touched (netboot for example).
941
942 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
943 src/GLIArchitectureTemplate.py:
944 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
945 string!. Try to use binary packages if available by default.
946
947 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
948 src/GLIArchitectureTemplate.py:
949 More error checking for _add_to_runlevel, to ensure that the init script
950 actually exists before we try to add it. set_services phase must take place
951 after the package installation, otherwise the init scripts might not exist.
952 Find the correct init script for the cron and logging daemons, and add that
953 instead of the package atom.
954
955 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
956 src/GLIArchitectureTemplate.py:
957 Fix up _edit_config so that it works if the file doesn't already exist. Fix
958 usage of 'file' to 'contents' for the variable name, as it shadows
959 __builtin__.file.
960
961 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
962 src/GLIArchitectureTemplate.py:
963 Add MTA install code, and include MTA install phase. Ensure
964 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
965 for 'none' kernel config for build_kernel phase. Put kernel_script in
966 /var/tmp instead of /root for build_kernel phase.
967
968 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
969 Rename mta variables to match syslog/cron variables.
970
971 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
972 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
973 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
974 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
975 src/templates/.cvsignore, src/tests/.cvsignore:
976 Refactor partition formatting again to include error checking. Allow 'none'
977 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
978
979 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
980 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
981 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
982 only have a single spawn call.
983
984 11 Jun 2005; Preston Cody <codeman@gentoo.org>
985 refixed samyron's fix of set_architecture_template.
986
987 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
988 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
989 be executable.
990
991 10 Jun 2005; Scott Myron <samyron@gentoo.org>
992 Fixed one of the FIXME's in the ClientConfiguration. There is now some
993 error checking when you call set_architecture_template.
994
995 10 Jun 2005; Preston Cody <codeman@gentoo.org>
996 moved the mkfsopts input to the partition options menu instead of the during
997 the creation process. updated GenDialog to say it supports reiserfs v3.
998
999 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1000 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1001 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1002 Add support for other partition types to dialogfe.
1003 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1004 avoid integer overflows and wraparounds.
1005
1006 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1007 Removed start/end from XML output and added mkfsopts to partitioning info.
1008 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1009 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1010 in GLIClientConfiguration. Change from .1 and .9 to constants for
1011 partitioning. Fix free space overwriting bug. Remove a few unused functions
1012 from rewrite. Fix call to get_partition_at()
1013
1014 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1015 Updates to GenDialog and dialogfe.
1016
1017 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1019
1020 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1021 more GenDialog updates to partitioning.
1022
1023 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1024 Indenting issue in GLISD/get_ordered_partition_list.
1025 updates to GenDialog partitioning and added default UTC for timezone in IP.
1026
1027 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1028 Added GLISD.get_model()
1029
1030 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1031 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1032 More updates to GenDialog :)
1033
1034 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1035 Added get_interface_realname() function.
1036
1037 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1038 Added auto-save of CConfig and copying to new /root after install.
1039 yet even more GenDialog updates.
1040
1041 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1042 removed print statement from GLISD. more updates to GenDialog.
1043
1044 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1045 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1046 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1047 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1048 places in GLIClientConfiguration.
1049
1050 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1051 Fix mount_local_partitions(), configure_fstab(), and
1052 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1053 A few more fixes for templates/x86Archtemplate
1054
1055 27 May 2005; Preston Cody <codeman@gentoo.org>
1056 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1057 a work in progress.
1058
1059 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1060 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1061 directly. GLISD can now handle data imported from XML.
1062
1063 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1064 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1065 handle blank (no disklabel) disks.
1066
1067 20 May 2005; Preston Cody <codeman@gentoo.org>
1068 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1069 up, documented, and separated out serialization and grouped all sections.
1070
1071 19 May 2005; Preston Cody <codeman@gentoo.org>
1072 Reorganization of ClientConfiguration and gutting of unused functions.
1073 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1074
1075 18 May 2005; Preston Cody <codeman@gentoo.org>
1076 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1077
1078 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1079 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1080 partitioning. CC serializes install profile to disk and prepare_chroot()
1081 copies it into /mnt/gentoo/root
1082
1083 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1084 Moved URI parsing into new function parse_uri()
1085
1086 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1087 Added XMLParser module.
1088
1089 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1090 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1091 Minor fix to is_uri() regex to allow hyphens in hostname.
1092
1093 12 May 2005; Preston Cody <codeman@gentoo.org>
1094 Updated finishing_cleanup for new unmounting method from agaffney.
1095
1096 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1097 Fix GLILogger to use correct time format string. Fix _edit_config() to
1098 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1099 unicode support to is_realstring().
1100
1101 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1102 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1103 return value instead of non-zero. Add code to output a traceback to the
1104 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1105 instead of --nocolor.
1106
1107 10 May 2005; Preston Cody <codeman@gentoo.org>
1108 Added GLIGenDialog.py to make a generic class for the dialog functions that
1109 can be used by both dialogfe and the netfe/be. updated both for new filename.
1110 date changes. 2004->2005.
1111
1112 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1113 Removed 'quiet=True' from spawn() calls
1114
1115 10 May 2005; Preston Cody <codeman@gentoo.org>
1116 Updated GLIUtility with patches from chotchki. Also added documentation
1117
1118 9 May 2005; Preston Cody <codeman@gentoo.org>
1119 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1120 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1121 from bug #89683, mostly touchups.
1122
1123 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1124 GLIStorageDevice cleanup patch from bug #91761
1125
1126 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1127 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1128 _edit_config(). Error logging casts 'error' to str
1129
1130 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1131 Exceptions received in CC are logged before being passed to the FE. Added
1132 code to CC to handle exceptions *not* thrown by the installer itself.
1133
1134 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1135 get_max_mb_for_resize() returns -1 if not self.resizeable
1136
1137 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1138 More dirty rsync hacks :-/
1139
1140 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1141 Patches from chotchki (bug #90325) to improve CC networking. untested.
1142
1143 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1144 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1145 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1146 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1147 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1148 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1149 _get_packages_to_emerge()
1150
1151 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1152 Added group-adding code to set_users in ArchTemplate
1153
1154 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1155 Added post-install script code
1156
1157 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1158 Fixed encapsulation issues in GLIClientController (bug #90141)
1159
1160 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Update resizing code in GLIStorageDevice
1162
1163 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1164 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1165
1166 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 Reverted change to ArchTemplate and added support for commented line in old
1168 code.
1169
1170 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1171 Changed _edit_config() to modify value in-place instead of commenting out and
1172 adding the new value to the end of the file.
1173
1174 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1175 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1176 Also updated TODO list.
1177
1178 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 Use blackace's one-liner to add comments for all function for use with
1180 pythondoc.
1181
1182 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1183 Moved 'end >= device_sectors' check out of loop to check for next partition's
1184 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1185 Partitioning code now tracks start/end of extended for placing logicals. End
1186 point of logical is now adjusted along with start.
1187
1188 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1189 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1190 the way of partitioning from a blank disk. Add int() around access to minor
1191 key in partition information due to new partition code leaving them as float.
1192
1193 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1194 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1195
1196 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1197 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1198
1199 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1200 Added support for DHCP options and MAC addresses in the InstallProfile.
1201
1202 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1203 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1204 sed to properly strip out junk.
1205
1206 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1207 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1208 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1209
1210 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1211 Fixed indent problem in GLICController
1212
1213 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Check for disklabel type "loop" and use the device name without a minor.
1215
1216 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1217 Remove /tmp/compile_output.log and /var/log/install.log when install is
1218 complete. Added code to (hopefully) keep 2nd thread running after install.
1219 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1220 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1221 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1222
1223 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1224 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1225 when unpacking tarball.
1226
1227 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1228 rewrote filesystem_tools. looks like it works so ripping out all the old
1229 filesystem_tools code.
1230
1231 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1232 Changed the print statements to logging in the partitioning BE code.
1233 the logger may need to be imported to the x86archtemplate. unknown yet.
1234 Added the finishing_cleanup function.
1235 added a fix to the logger from BenUrban
1236
1237 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1238 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1239 URIs. The blank uri check has been commented out.
1240 ripped out error checking of set_services. this is done by _add_to_runlevel.
1241
1242 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1243 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1244
1245 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1246 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1247 the install profile if available. Commented out spawn() debugging prints
1248
1249 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1250 small changes to setup_network_post. moved adding to runlevel of net.x to
1251 after the device gets symlinked. added domainname runlevel command.
1252
1253 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1254 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1255 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1256 spawn() call in livecd-kernel code to pass environment variables.
1257 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1258 the install profile if available.
1259
1260 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1261 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1262 to handle installing the livecd kernel into the new system.
1263
1264 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1265 should emerge hotplug and coldplug before adding them to runlevel.
1266
1267 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1268 took chroot out of grub_install command.
1269
1270 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1271 Changed chroot wrapper code in spawn() to write the wrapper the python way
1272 instead of the bash way to avoid quote conflicts. Added
1273 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1274 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1275 as it breaks the piping.
1276
1277 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1278 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1279
1280 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1281 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1282 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1283 GLIInstallProfile.
1284
1285 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1287 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1288 into /mnt/gentoo in prepare_chroot()
1289
1290 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1292 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1293 to start/end sectors
1294
1295 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1296 Add 2>&1 to cmd in spawn()
1297
1298 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1299 Modified GLIUtility.exitsuccess() to work with return value from
1300 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1301 creates wrapper script for commands run inside chroot so multiple commands
1302 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1303 for the generated script from spawn()
1304
1305 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1306 Removed default values for stage tarball URI and portage tree URI from
1307 InstallProfile. These should be set by the FEs. also added services step to
1308 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1309 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1310
1311 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1312 Small fix for setting the default gateway. Also added feature to dialogfe.
1313
1314 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1315 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1316
1317 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1318 Fixed a bunch of true -> True typos. lots of em
1319 only write new resolv.conf if there are dns servers listed.
1320
1321 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 Commented out 'display_on_tty8=True' in start_portmap()
1323
1324 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1325 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1326
1327 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1329 lang parameter to __init__()
1330
1331 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1332 updates to TODO list.
1333
1334 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1335 Initial code for quickpkg GRP support. Fix loop to grab packages from
1336 'emerge -p blah'
1337
1338 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1339 check for dhcp in the network stuff and emerge it if it is.
1340 added quickpkg to TODO list
1341
1342 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1343 Changed the raising of 'warning' exceptions to a simple log of the error
1344 so that the installer can continue.
1345
1346 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1347 Some big changes. First, changed most output to display_on_tty8.
1348 Second, added log lines to all templates. Some smaller fixes such as typos.
1349 Also did some cleanups of old commented lines.
1350
1351 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1352 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1353 Undo change with fix. Escaping fix in GLIStorageDevice.py
1354
1355 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1356 more updates to TODO list. hopefully we'll soon start removing items instead
1357 of adding them.
1358
1359 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1360 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1361
1362 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1363 updated TODO list. (again)
1364
1365 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1366 changed output of portmap start to display_on_tty8.
1367 fixed bootloader for udev and multiple kernels
1368 fixed custom kernel config (again)
1369
1370 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1371 changed default value of CC._enable_ssh to True because this is smart.
1372 added code to allow custom kernel .config. may be unstable and break. sorry.
1373
1374 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1375 partition() now waits until after it checks for partition flags before delete
1376 the partitions :P
1377
1378 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1379 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1380 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1381 blank.
1382
1383 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1384 Various fixes related to the add_users function. Still not yet finished.
1385 Added things to the TODO list. Lets start using that!
1386
1387 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Added code to x86Template to format newly created partitions. Also added
1389 some error checking code. GLIStorageDevice passes 'minor' with data to
1390 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1391 mounting code.
1392
1393 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1394 Took out unnecessary setting of random livecd root password. the cd already
1395 sets it randomly.
1396
1397 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Took out an unneeded step from CC's run()
1399
1400 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1401 Attempt at detecting and adding windows partitions to lilo.
1402
1403 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1404 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1405 partition. fixed misc exit_status => exitstatus typo.
1406
1407 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1408 Added basic code for resizing filesystems with pyparted. Fixed code for
1409 resizing ntfs and ext2/3.
1410
1411 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1412 Fixed partition() in x86Template so that it scans through logicals and deletes
1413 before deleting containing extended partition. Also clears partition table to
1414 be safe before third pass.
1415
1416 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1417 Added mount_network_shares. not able to test it from this computer.
1418 will test when i get back to school.
1419 also added start_portmap to the client_controller as an always-do.
1420 agaffney says this is needed for NFS mounts to work.
1421
1422 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1423 Partial rewrite of partitioning code in x86Template. No longer shells out to
1424 parted to perform actions, now uses all pyparted calls. Code "works" in a
1425 test, but still needs lots of TLC. Also modified tests/install.py to work
1426 with x86Template and GLIClientConfiguration.
1427
1428 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1429 Initial move of partitioning code from ArchTemplate to x86Template.
1430
1431 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1432 Added grp_install and services to InstallProfile. forgot about the set_root_password
1433
1434 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1435 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1436 Test Install ran very well (skipping partitioning).
1437
1438 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1439 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1440 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1441 some may still have eluded me.
1442
1443 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1444 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1445 Just finished mount_local_partitions in GLIArchitectureTemplate
1446
1447 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1448 Added get_num_sectors() to GLIStorageDevice.
1449
1450 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1451 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1452 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1453 from GLIInstallProfile.
1454
1455 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1456 GLIStorageDevice returns "unknown" instead of "" for get_type()
1457
1458 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1459 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1460 actually work. Commented out resizability checking code for speed.
1461
1462 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1463 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1464 GLIStorageDevice at the suggestion of plors
1465
1466 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1467 Added a function to GLIUtility to pull a value from a make.conf-style config
1468 file. Minor type fix to GLIInstallProfile.py
1469
1470 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1471 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1472 network mounts from partition data structure in GLIInstallProfile
1473
1474 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1475 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1476 can be resized.
1477
1478 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1479 Added some of the final functions to GLIInstallTemplate.
1480 Yes this project is still active despite rare use of the Changelog!
1481
1482 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1483 Added the GLIPartitionTools.py file. This is a temporary insertion of
1484 partitioning tools that will eventually go into their own package.
1485
1486 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1487 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1488 for the program). Added __init__(install_profile, client_configuration) to
1489 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1490 to avoid constantly passing stuff every time we call a method.
1491
1492 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1493
1494 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1495 files without messing up all the other stuff in them. This will be used for making
1496 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1497
1498 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1499
1500 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1501 have a few basic things. I added two private methods. One is _depends(). This
1502 will be used for dependency checking (ie. unpacking a tarball requires that
1503 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1504 same syntax as os.system(), however, instead of being run in the liveCD
1505 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1506 isolated the code. Hope to work more this week to get this class formed...
1507
1508 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1509
1510 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1511 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1512 to allow for easier modification (mutable, rather than immutable objects). Updated
1513 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1514 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1515 Added initial unit test code.
1516
1517 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1518
1519 Added initial changelog. Setting up the basic structure of the CVS repository
1520 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1521 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20