/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1197 - (show annotations) (download)
Wed Dec 28 04:44:18 2005 UTC (8 years, 6 months ago) by agaffney
File size: 63609 byte(s)
  src/net/server/html/*:
  converted showclients, load/saveprofile

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.552 2005/12/28 04:44:18 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/net/server/html/*:
10 converted showclients, load/saveprofile
11
12 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
13 src/GLIPortage.py:
14 exclude packages already in chroot vdb from binary deplist
15 chroot to use best_version for chroot's vdb
16 src/runtimedeps.py:
17 accept ROOT via commandline instead of env
18
19 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
20 src/runtimedeps.py:
21 remove passing of ROOT
22 src/GLIPortage.py:
23 modify get_deps() to get deptree for each package and merge into final list
24 remove depgraph class
25 add debugging code to get_deps()
26 src/GLIArchitectureTemplate.py:
27 combine code for GRP/compile in install_packages() into one block
28 debugging code in install_packages()
29
30 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
31 src/runtimedeps.py:
32 initial commit
33 src/GLIPortage.py:
34 use separate script for GRP deps
35 remove calls to portage module
36
37 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
38 src/GLIPortage.py:
39 initial commit
40 move some of portage function from GLIAT
41 flipped around a few function args
42 src/GLIArchitectureTemplate.py:
43 revamp install_packages() for new GLIPortage
44
45 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
46 src/GLIArchitectureTemplate.py:
47 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
48
49 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
50 src/net/server/gliserv.py:
51 wrap generated code in a class to isolate it a bit better
52 302 redirects work
53 don't use cgi.escape() for <% %>
54 src/net/server/html/webgli/*:
55 load/save profile
56 src/GLIUtility.py:
57 change /sbin/lspci to just lspci
58
59 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIClientController.py:
61 change ordering of statements in CC run() while loop to not go past the end
62 of the array
63 src/GLIArchitectureTemplate.py:
64 removed redundant bind mounts
65
66 18 Dec 2005; Preston Cody <codeman@gentoo.org>
67 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
68 added a diagram by blackace from last night.
69 added the glossary in RTF format.
70
71 17 Dec 2005; Preston Cody <codeman@gentoo.org>
72 x86AT: separated out emerge/configure from running of bootloader
73 added MBR drive support to lilo.
74 these changes will likely not work.
75 AT: added setup_and_run_bootloader step.
76
77 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
78 src/net/server/gliserv.py:
79 call generated code in a function
80 src/net/server/html/webgli/*:
81 include top/bottom
82 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
83 src/GLIClientCongifuration.py:
84 install mode magic
85
86 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
87 src/GLIClientController.py:
88 use GLIException when there's an import problem
89 added debug code to show install_steps
90 src/templates/amd64ArchitectureTemplate.py:
91 add . to import path
92 proper path this time: ../../templates
93 src/GLIArchitectureTemplate.py:
94 add _portage_best_version() function
95
96 11 Dec 2005; Preston Cody <codeman@gentoo.org>
97 added initial glossary and gimli diagram to the docs directory.
98 modify gli-dialog to allow editing of the install_profile after loading XML.
99
100 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
101 src/net/server/html/webgli/:
102 converted globaluse, localuse, networkmounts, portagetree, and stageselection
103 moved saveclientconfig stuff into clientconfig
104 moved saveconfigfiles into config files
105 converted etc_portage and makedotconf
106 converted bootloader and kernel
107 convert daemons, extrapackages, networking, review, services, timezone, users
108 src/net/server/gliserv.py:
109 proper 404 handling for .pyhtml extension
110 HTML escape <% %> stuff
111 work around python's sucky regexes
112 src/GLIInstallProfile.py:
113 allow set_{rsync,ftp,http}_proxy() to accept empty values
114
115 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
116 src/net/server/gliserv.py:
117 initial commit of Legolas templating engine
118 302 redirects
119 src/net/server/html/index.html, src/net/server/webgli_template.html:
120 minor changes for new code
121 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
122 initial commit of the conversion from the monolithic WebGLIHandler.py to the
123 one file per path Legolas goodness
124 partitioning[2-4] done
125
126 5 Dec 2005; Preston Cody <codeman@gentoo.org>
127 webgli: dhcp options in CC and post-install.
128 updated comparison chart.
129 webgli: etc/portage/* and distcc support added. not too-well tested.
130
131 4 Dec 2005; Preston Cody <codeman@gentoo.org>
132 webgli_template.html: valign=top on left side.
133 webgli: fix bootloader boot_device. now working.
134 webgli: CC proxy done. post-install proxy in progress.
135
136 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
137 src/net/server/webgli_template.html:
138 increase padding for content cell to 7px and add colspan=2
139
140 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
141 webgli: added graphic bar on top
142 webgli: added hover effects on the links on the left
143 webgli: re-rendered header_bg.png to stretch without artifacts
144
145 3 Dec 2005; Preston Cody <codeman@gentoo.org>
146 webgli: make.conf disabling fixes for dynamic_stage3
147 fixed portage snapshot browse popup
148 all changes tested.
149 webgli: add debug mode to CC screen. the screen still needs lots of work.
150
151 1 Dec 2005; Preston Cody <codeman@gentoo.org>
152 added debug mode question to gli-dialog
153 added CC proxies to CC networking for gli-dialog
154 webgli: fixed skip CC networking if connection active
155 webgli: portage snapshot defaults to CD
156 webgli: bootloader mbr drive selection
157 webgli: USE flags unselectable if dynamic_stage3
158 webgli: manual extra packages and save button.
159
160 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
161 src/GLIUtility.py:
162 change ping count to 2
163 docs/comparison.html
164 initial commit
165
166 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
167 src/templates/x86ArchitectureTemplate.py:
168 fix map() issue with grub code
169 replace kernel_names and initrd_names loops with one-liners
170
171 27 Nov 2005; Preston Cody <codeman@gentoo.org>
172 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
173 initial gli-dialog support for recommended partitioning layout and clear.
174 failure cleanup now an option for gli-dialog.
175 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
176 added comparison list and updated TODO!
177
178 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
179 src/GLIArchitectureTemplate.py:
180 fix to stage1() debug code
181 fix to stage2() debug code
182
183 26 Nov 2005; Preston Cody <codeman@gentoo.org>
184 some more bootloader code fixes. forgot boot_device != mbr_device.
185
186 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
187 src/GLIStorageDevice.py:
188 fix to unallocated space merging when last one is after part 4
189
190 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
191 src/GLIArchitectureTemplate.py:
192 small fix to debugging code in copy_pkg_to_chroot()
193
194 23 Nov 2005; Preston Cody <codeman@gentoo.org>
195 more bugfixes with bootloader code
196 gli-dialog side appears to work
197
198 21 Nov 2005; Preston Cody <codeman@gentoo.org>
199 initial adding of boot_device to backend.
200 initial boot_device support added to gli-dialog.
201 some fixes of my poor coding
202
203 20 Nov 2005; Preston Cody <codeman@gentoo.org>
204 converted gli-dialog to use the install_package_list.
205 gtkfe has already been converted by AllanonJL
206 new way working in gli-dialog now and added to webgli.
207 added set/get_boot_device() to IP
208
209 19 Nov 2005; Preston Cody <codeman@gentoo.org>
210 get_install_package_list added to InstallProfile. This can be used by the FEs
211
212 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213 src/templates/x86ArchitectureTemplate.py:
214 call ls with '-1 --color=no'
215
216 16 Nov 2005; Preston Cody <codeman@gentoo.org>
217 added warning (#9) to GRP ppl about stage3 tarballs
218
219 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
220 src/GLIArchitectureTemplate.py:
221 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
222 confused
223
224 13 Nov 2005; Preston Cody <codeman@gentoo.org>
225 removed protocols from rc.conf screens
226 finished initial rc.conf and make.conf in webgli
227
228 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
229 src/net/server/gliserv.py:
230 add -h option to usage()
231 show time and request URI in debug mode
232 show client IP in debug mode
233 just use IP instead of trying to do a reverse lookup
234
235 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
236 src/net/server/gliserv.py:
237 'classier' 401 message
238 proper commandline parsing
239 help via -h
240 user/pass can be specificed via commandline option
241
242 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
243 src/net/server/gliserv.py:
244 basic HTTP auth
245
246 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
247 src/net/server/gliserv.py:
248 dynamic module reloading (yipee!)
249 send 'Last-Modified' header for real files
250 respond to HEAD with just headers
251 src/net/server/handlers/WebGLIHandler.py:
252 icons for drives
253
254 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/net/server/handlers/WebGLIHandler.py:
256 initial 'pretty' partition table display support
257 clicking partition in 'pretty' display works instead of radio buttons
258 radio buttons and pretty display work together
259 META redirect instead of javascript
260 pretty display stretches across entire screen
261 'Recommended layout' and 'Clear drive' functions
262 properly catch exceptions from do_recommended()
263 src/GLIArchitectureTemplate.py:
264 replace preinst, copy, postinst, rm steps with qmerge
265 whoops...that shouldn't have been commented out
266 create image_dir with -p in copy_pkg_to_chroot()
267 more generic of symlink crappiness
268 new copy_pkg_to_chroot() actually works now
269
270 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
271 src/GLIStorageDevice.py:
272 initial generic disk support
273 fixes for add_partition() code
274 src/net/server/handlers/WebGLIHandler.py:
275 added support for creating generic disks
276 add new partition working
277 save and delete partitions
278
279 6 Nov 2005; Preston Cody <codeman@gentoo.org>
280 webgli: Partitioning making progress.
281
282 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
283 src/GLIArchitectureTemplate.py:
284 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
285 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
286 dir) and works around /etc/gconf symlink problem
287
288 5 Nov 2005; Preston Cody <codeman@gentoo.org>
289 webgli: lots of updates. preliminary partitioning. extra packages works.
290
291 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/server/gliserv.py:
293 httpd now supports HTTPS and falls back to HTTP if not available
294 make fallback actually work
295 src/net/server/SecureXMLRPCServer.py:
296 SecureSocketServer is now threaded
297
298 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
299 src/net/client/gliclient.py:
300 try to use HTTPS for XMLRPC first and fallback to HTTP
301 pretend mode
302 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
303 HTTPS XMLRPC goodness from samyron
304 pass name of certificate
305
306 31 Oct 2005; Preston Cody <codeman@gentoo.org>
307 wegli: daemons and services screens done.
308
309 30 Oct 2005; Preston Cody <codeman@gentoo.org>
310 webgli: networking and users screens
311 added return_redirect to handler.py
312 loading and saving install/client profiles works for webgli now
313 Review also done
314
315 *GLI-0.2 (27 Oct 2005)
316
317 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
318 src/templates/x86ArchitectureTemplate.py:
319 properly check for bootloader emerge exist status with exitsuccess()
320 log output of grub install command
321 add --batch --no-floppy to grub command
322 grubinstallstring only gets logged if debug is on
323 src/GLIUtility.py:
324 update progress bar to 100% when process finishes
325
326 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
327 src/GLIClientController.py:
328 added debugging code for the interaction between the 2 threads via Event()
329 src/GLIUtility.py:
330 doubled the buffer size in spawn()
331 bump buffer size up to 16384
332 only report progress in 5% increments
333 src/GLIArchitectureTemplate.py:
334 kernelpkgs.txt support code
335 above disabled because it sucks
336 added add_pkg_to_world()
337
338 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
339 src/GLIArchitectureTemplate.py:
340 use tar | tar to copy files in copy_pkg_to_chroot()
341 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
342
343 23 Oct 2005; Preston Cody <codeman@gentoo.org>
344 DEBUGGING ADDED TO AT. verbose field added to CConfig.
345
346 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
347 src/net/server/gliserv.py:
348 / maps to index.html
349 look for actual files in html/
350 src/net/html:
351 new template
352 src/GLIUtility.py:
353 added parse_vdb_contents()
354 src/GLIArchitectureTemplate.py:
355 added copy_pkg_to_chroot()
356 added debug code to dynamic-stage3
357 switch dynamic-stage3 to new method
358 lots of bug fixes from adding debug code
359
360 22 Oct 2005; Preston Cody <codeman@gentoo.org>
361 webgli initial bootloader support + changed make.conf.
362 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
363
364 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
365 src/GLIUtility.py:
366 horrible tangled mess of code that is tarball unpacking subprogress display
367 add unpack progress to portage snapshot
368 use read() instead of readlines() in spawn()
369 only update progress bar for whole percents
370
371 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
372 src/templates/x86ArchitectureTemplate.py:
373 change call to 'grub' to use GLIUtility.exitsuccess()
374 add definition of 'build_mode' in _configure_lilo()
375 src/misc/updategtkfe, src/misc/updateglid:
376 fix so subshell is called in root shell
377
378 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
379 src/net/server/handlers/WebGLIHandler.py:
380 stage screen launches URI browser in sized window with various properties set
381
382 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
383 src/misc/updategtkfe:
384 updated to actually work
385 remove previous snapshot and extracted dir before downloading
386 src/misc/updateglid:
387 updated to actually work
388 src/templates/x86ArchitectureTemplate.py:
389 fixed bug where grub code was looking for 'root+root+file_name2'
390
391 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
392 src/net/server/handlers/WebGLIHandler.py:
393 URI browser
394 added mirror selection
395 src/GLIUtility.py:
396 ls via ssh strips off ending *
397
398 16 Oct 2005; Preston Cody <codeman@gentoo.org>
399 more updates to webgli. stage selection.
400
401 11 Oct 2005; Preston Cody <codeman@gentoo.org>
402 updated webgli with preliminary Network Mounts support.
403
404 9 Oct 2005; Preston Cody <codeman@gentoo.org>
405 GenDialog: string formatting and yes/no label fixes.
406 added WebGLI template for gliserv.py
407 added WebGLIHandler as well as a definition for it in gliserv.py
408 updates to the webgli files even though they won't be there for long.
409 Utility: remove exception for non-existant grppkgs.txt until the new livecd
410 goes public.
411
412 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
413 src/net/server/gliserv.py:
414 override dict to not be so anal
415 main server now loads separate module to handle requests
416 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
417 split out profile URLs into separate handler function
418 move handlers into subdirectory
419 add Welcome and Clients handlers
420
421 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/GLIUtility.py:
423 raise exception if password prompt received twice
424
425 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
426 src/GLIUtility.py:
427 removed rot13ify()
428
429 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
430 src/net/server/gliserv.py:
431 allow for param to be passed multiple times in GET
432 no XMLRPC functions return None
433 modify POST request parsing to only create a list if needed
434 fix GET request parsing so the list creation for multiple values works
435 src/net/client/gliclient.py:
436 various typo and type mismatch fixes
437 exit after exception
438
439 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
440 src/net/client/gliclient.py:
441 initial commit
442 pass MAC to XMLRPC functions
443 src/net/server/GLIServerProfile.py:
444 rename GLIClientsProfiles to GLIServerProfile
445
446 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
447 src/net/server/gliserv.py:
448 now handles POST requests
449 move majority of request handling code to common_handler() to reduce code
450 duplication
451 profile loading
452 client reg via XMLRPC goes into SharedInfo()
453 /showclients redesign
454 template fixes
455 allow handler functions to add/change headers
456 save profile
457
458 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
459 src/net/server/GLIClientsProfiles.py:
460 initial commit
461 src/net/server/template.html:
462 initial commit
463 src/net/server/gliserv.py:
464 add template mojo
465
466 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
467 src/net/server/gliserv.py:
468 XMLRPC mojo
469
470 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
471 src/GLIArchitectureTemplate.py:
472 add code in _edit_config() to comment line where variable is defined
473 previously
474 insert new line under previous definition of variable if it exists
475 small _edit_config() cleanup
476 src/GLIStorageDevice.py:
477 add clear_partitions() function
478 new sizes for recommended partition layout
479 automatically calculate swap size for recommended layout
480
481 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
482 src/templates/x86ArchitectureTemplate.py:
483 fat16 mojo
484
485 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
486 src/GLIStorageDevice.py:
487 prevent do_recommended() from being run twice
488 rewrite do_recommended() to be more robust
489 src/GLIArchitectureTemplate.py:
490 rework _edit_config() to not write duplicate entries
491
492 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
493 src/GLIStorageDevice.py:
494 added do_recommended() function to automatically created 256M/1G/* layout
495
496 17 Sep 2005; Preston Cody <codeman@gentoo.org>
497 src/gli-dialog.py: added set_distcc to the list
498 GenDialog: added set_distcc. untested.
499 IP: added install_distcc flag.
500 AT: added install_distcc function based on the flag. runs after build_kernel
501 changed AT spawn command for distcc for nodeps.
502
503 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
504 src/GLIUtility.py:
505 add rot13ify() function
506
507 16 Sep 2005; Preston Cody <codeman@gentoo.org>
508 src/GenDialog.py
509 added a sentence of text. unchecking support added.
510
511 15 Sep 2005; Preston Cody <codeman@gentoo.org>
512 src/GLIUtility.py
513 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
514 src/GenDialog.py
515 still working on extra_packages. transformed the list to new format.
516 added GRP indication to list. untested.
517 TODO lists updated.
518 src/fe/dialog/gli-dialog.py
519 spelling mistook.
520
521 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
522 src/GLIUtility.py:
523 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
524
525 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/GLIUtility.py:
527 add get_directory_listing_from_uri()
528 add http support to above
529 add ftp support to above
530 add scp support to above
531 src/GLIArchitectureTemplate.py:
532 "0" instead of 0 for key of single-element dict passed to _edit_config()
533
534 5 Sep 2005; Preston Cody <codeman@gentoo.org>
535 value_only -> only_value
536
537 3 Sep 2005; Preston Cody <codeman@gentoo.org>
538 gutted out all of etc_portage structure since it is now all handled by
539 etc_files
540
541 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
542 src/GLIArchitectureTemplate.py:
543 install_packages() sends progress update notifications
544 src/templates/x86ArchitectureTemplate.py:
545 increase sleep to 5s between format tries
546 src/GLIClientController.py:
547 pass 'self' to AT instead of 'self._pretend'
548
549 2 Sep 2005; Preston Cody <codeman@gentoo.org>
550 logger -> logger.log in x86AT
551
552 1 Sep 2005; Preston Cody <codeman@gentoo.org>
553 added set_etc_portage to IP. debugging gli-d's support for it.
554
555 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
556 src/templates/x86ArchitectureTemplate.py:
557 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
558
559 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
560 src/GLIArchitectureTemplate.py:
561 add _portage_best_version() function and rework install_packages() to allow
562 for future X of Y tracking
563 Use best_visible instead of best_version
564 tracked down and fixed missing = causing empty install extra packages
565 use = when emerging also
566 quickpkg hokey pokey
567 run _get_packages_to_emerge() again with -pk
568
569 22 Aug 2005; Preston Cody <codeman@gentoo.org>
570 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
571 the end of install_packages.
572 added updateglid to /src/misc
573 updated all core files with new GPL notice and copyright statement.
574
575 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
576 src/GLIUtility.py:
577 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
578 a snapshot in /mnt/cdrom/snapshots/
579 get_snapshot_from_cd() adds file:// at the beginning
580 change calls to extra package special case functions to 'self.blah'
581
582 21 Aug 2005; Preston Cody <codeman@gentoo.org>
583 src/ArchTemplate: changed "voodoo".
584 changed order of portage sync methods. made a fallback to webrsync if
585 normal emerge sync fails.
586 removed get_sources_from_cd because it is obsolete.
587 add special cases to install_packages. remove fatal exception on package
588 install failure b/c the box will still be bootable.
589 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
590 handled in the FEs.
591 src/GenDialog: added a bunch of code for dealing with x11-based packages.
592 awaiting testing.
593
594 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
595 src/GLIStorageDevice.py:
596 global try/except block around fs resizable detection code
597 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
598 install-failed cleanup function
599
600 18 Aug 2005; Preston Cody <codeman@gentoo.org>
601 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
602
603 16 Aug 2005; Preston Cody <codeman@gentoo.org>
604 GLIGenDialog:
605 add drive choices for loaded configs.
606 force snapshot for dynamic_stage3
607 init the snapshoturi input to the cd snapshot if not already selected.
608 if dynamic_stage3, skip the make.conf step.
609 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
610 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
611
612 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/GLIArchitectureTemplate.py:
614 manually call MAKEDEV in stage3-dynamic code
615 copy /etc/inittab.old to /etc/inittab in chroot
616 src/GLIUtility.py:
617 add beginning of validate_uri() function
618 add file:/// support to validate_uri()
619 single quotes when setting livecd password
620
621 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
622 src/GLIGenDialog.py:
623 change getmountpoint() to get_mountpoint()
624 src/misc/updategtkfe:
625 committed script to automatically download latest snapshot and run gtkfe
626 src/templates/x86ArchitectureTemplate.py:
627 fix _configure_lilo_add_windows() for IP -> GLISD stuff
628 src/GLIArchitectureTemplate.py:
629 give tmp_minor an initial value in mount_local_partitions so that the value
630 remain from the previous drive
631
632 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
633 src/templates/x86ArchitectureTemplate.py:
634 Fix _configure_lilo() for IP using GLISD stuff
635 src/GLIArchitectureTemplate.py:
636 install_cron_daemon() treats "none" specially
637
638 14 Aug 2005; Preston Cody <codeman@gentoo.org>
639 old patch from Steven Mertens to resolve bug #96642
640 numerous asthetic changes to GenDialog, no real functionality changes though.
641 strings renamed for global use if necessary.
642 fix all three parts of bug 102291
643 disable set_etc_portage until fully-written.
644
645 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
646 src/GLIClientController.py:
647 lower-case http/ftp proxy envvars
648
649 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
650 src/GLIClientController.py:
651 log end of pre_install steps to aid in debugging
652 src/templates/x86ArchitectureTemplate.py:
653 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
654
655 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
656 src/GLIArchitectureTemplate.py
657 check to make sure that the device node we're wait for to exist isn't of
658 type 'free'
659
660 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
661 src/GLIGenDialog.py:
662 convert install_packages to list in set_extra_packages()
663 check return code of checklist() call in "Manual" section
664 *actually* fix the first problem
665
666 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
667 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
668 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
669
670 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
671 src/GLIArchitectureTemplate.py:
672 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
673
674 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
675 Add CDATA support to SimpleXMLParser and add utility functions for it.
676
677 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
678 src/GLIArchitectureTemplate.py:
679 Fix case where vixie-cron is specified as a full package atom, as we still
680 don't want to run 'crontab /etc/crontab' for it.
681
682 *GLI-0.1 (3 Aug 2005)
683
684 30 Jul 2005; Preston Cody <codeman@gentoo.org>
685 add scp to list of is_uri() so GenDialog doesn't complain.
686 fixed livecd-kernel bug in bootloader code.
687 fixed gendialog for dynamic_stage3 instead of "networkless"
688 change bootloader to allow for both initrd and initramfs.
689 fix IP for dynamic_stage3.
690 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
691
692 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
693 Added full scp:// URI support to get_uri() in GLIUtility
694 Remove "networkless" from dynamic stage3 if locic.
695 Remove print statement from scp:// code.
696 Change scp code to check for "assword: " instead of "Password:"
697 Fix post-install network code to create net.eth1+ symlink correctly
698 Check to make sure pkg can be split on / and some debugging code
699 Add 2>dev/null to emerge call in _get_packages_to_emerge()
700 SimpleXMLParser handles True/False/None correctly now
701 Comment out above fix
702 Add partitioning wait-for-device-to-exist code to mount_local_partitions
703
704 28 Jul 2005; Scott Myron <samyron@gentoo.org>
705 Removed a FIXME in the GLIClientConfiguration that is no
706 longer needed.
707
708 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
709 Default to x86 in ClientConfig
710 Typo in build-a-stage3 code.
711 Remove MAKEDEV call in build-a-stage3 postscript.
712
713 26 Jul 2005; Preston Cody <codeman@gentoo.org>
714 Rewrote init of IP for gli-d. Other GenDialog updates.
715 allow network_type to be None in CConfig.
716
717 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
718 Add _dynamic_stage3 option to IP.
719 Add check for that option to dynamic stage3 code in ArchTemplate.
720 Fix code to determine default route in get_eth_info() in GLIUtility.
721 Fix serialization of dns-servers in ClientConfig.
722
723 24 Jul 2005; Preston Cody <codeman@gentoo.org>
724 changed default values of cron/logger in IP.
725 moved GenDialog IP init out to the individual files. gli-dialog's version
726 will change quite a bit.
727
728 22 Jul 2005; Preston Cody <codeman@gentoo.org>
729 added ppcArchTemplate. blank now. working on yaboot.
730 modified ArchTemplate for amd64 and ppc custom kernels.
731 skeleton implementation of _configure_yaboot.
732 small fixes to other templates.
733
734 21 Jul 2005; Preston Cody <codeman@gentoo.org>
735 GenDialog updates. changed comment in IP.
736
737 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
738 src/GLIInstallProfile.py:
739 Fix codeman's screwup of changing the service seperator to ',' in the parser
740 without changing it in the serialization code! Also document this in a
741 comment so you find it easier. Everybody needs to make sure they update
742 their install profiles!
743
744 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
745 src/GLIArchitectureTemplate.py:
746 Fix casting of list to string and concat of None with string, as well as
747 commented prototype of checking that mounting actually worked (found a case
748 where mount can return success, but the mount won't be done).
749
750 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
751 src/templates/x86ArchitectureTemplate.py:
752 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
753 checking for the device, and sleeping 1 second each time.
754
755 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
756 src/templates/x86ArchitectureTemplate.py:
757 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
758 bootloader works again. Also rename _install_{grub,lilo} to
759 _configure_{grub,lilo} since they don't install the loaders anymore
760 themselves.
761
762 7 Jul 2005; Preston Cody <codeman@gentoo.org>
763 fix global USE flags to not include the arch types at the end.
764 updates to GenDialog and gli-d.
765
766 6 Jul 2005; Preston Cody <codeman@gentoo.org>
767 fixing bootloader code for no initrd and initrd->initramfs naming change.
768
769 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
770 Proper comments and parameters to GLIException in install_mta()
771 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
772 Add strip() to list_mirrors(), list_subarch_from_mirror() and
773 list_tarball_from_mirror() to eliminate blank last item.
774
775 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
776 Added stage3 generation code.
777
778 5 Jul 2005; Preston Cody <codeman@gentoo.org>
779 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
780 Mild changes to GenDialog.
781
782 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
783 Remove separate install step configure_rc_conf() since it's handled by
784 update_config_files()
785 Make a copy of newvalues in _edit_config() so quotes aren't added when the
786 function is called twice on the same file.
787
788 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
789 Missing \ in sed in _get_packages_to_emerge()
790 Removed explicit emerging of hotplug and no longer add it to the runlevel.
791 Check in _quickpkg_deps() to ignore blank package names returned from
792 _get_packages_to_emerge()
793
794 28 Jun 2005; Preston Cody <codeman@gentoo.org>
795 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
796 in the dialog.py gauge code.
797
798 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
799 Add code to update_config_files() to go through etc_files and update stuff.
800 Check to see that _etc_files['make.conf'] exists in get_make_conf()
801 Only use float() in partition xml parsing code if type == "free"
802
803 28 Jun 2005; Preston Cody <codeman@gentoo.org>
804 finished almost all internationalization of GenDialog.
805 attempt at fixing rc.conf function. moved 3 generate functions out of
806 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
807 added dialog.py to the fe/dialog directory so it actually gets used.
808
809 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
810 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
811
812 27 Jun 2005; Preston Cody <codeman@gentoo.org>
813 fix extra entry in list_mirrors()
814 beginning internationalization runthrough.
815
816 26 Jun 2005; Preston Cody <codeman@gentoo.org>
817 added dialog.py to /src temporarily until it gets accepted upstream.
818 fix for unused value in form in dialog.py and changed heights.
819 fix GenDialog forms.
820
821 25 Jun 2005; Preston Cody <codeman@gentoo.org>
822 Changed hostname/domainname for new baselayout.
823 Changed _add_to_runlevel errors to logs.
824 Updated TODO list to show status of GenDialog
825 More updates to GenDialog including two checklists that probably won't work.
826 update IP to use comma-separated list instead of space separated for services.
827
828 24 Jun 2005; Preston Cody <codeman@gentoo.org>
829 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
830 GenDialog as it gets closer to completion.
831
832 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
833 Modify get_eth_info() to take a full interface name (eth0 fex). float()
834 instead of int() in add_partition_device_partition() for minor (closes 96804)
835
836 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
837 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
838 instead of 'interfaces[interface][1]' since DHCP uses that field for its
839 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
840
841 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
842 Apply spawn() patch from #96644 (with minor changes). Make sure the return
843 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
844 small error with <pipe>.close() returning None. Fix space vs. tab issue.
845 Fix undefined variable 'output' issue in spawn().
846
847 20 Jun 2005; Preston Cody <codeman@gentoo.org>
848 More updates to GenDialog and gli-d.
849
850 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
851 Modify list_mirrors() to return a list of mirror URL/name pairs.
852
853 19 Jun 2005; Preston Cody <codeman@gentoo.org>
854 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
855 get subarch.
856
857 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
858 Backend partitioning will create disklabel is none exists. Installprofile
859 defaults to "" now instead of "msdos" for disklabel type. Fix for
860 mount_local_partitions() to remember device along with minor in the
861 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
862 add else block to log unsupported netmount types to mount_network_shares()
863
864 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
865 src/GLIArchitectureTemplate.py:
866 Refactor kernel_compile common stuff, fix 2.4 build process.
867 src/fe/cli/clife.py:
868 Logging system.
869 src/GLIUtility.py, src/GLIStorageDevice.py:
870 Add comments about re-writes needed for boxes without sysfs.
871
872 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
873 src/GLIArchitectureTemplate.py:
874 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
875 'make dep' call for custom compile. build_mode support for prepare-only and
876 none types completed. custom compile function chains shell functions in
877 spawned script, to allow for catching all errors.
878
879 15 Jun 2005; Preston Cody <codeman@gentoo.org>
880 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
881 and GenDialog. other gendialog updates as well. kernel updates untested.
882
883 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
884 src/GLIInstallProfile.py:
885 Change structure of etc-portage stuff. The serialization was broken before my
886 last commit, and I am the only person that's ever used it. The new schema is
887 as follows:
888 <etc-portage>
889 <file name="package.mask"/>
890 <file name="package.unmask">
891 <entry atom="sys-kernel/openmosix-sources"/>
892 </file>
893 <file name="package.use">
894 <entry atom="sys-libs/db">
895 -java
896 </entry>
897 <entry atom="dev-libs/cyrus-sasl">
898 -ldap
899 </entry>
900 </file>
901 </etc-portage>
902
903
904 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
905 src/GLIInstallProfile.py:
906 Add new entry for gli-profile/kernel-build-method item. Add missing
907 serialize_etc_portage (temporary). Make serialize_make_conf always print the
908 keys in the same order.
909
910 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
911 src/GLIArchitectureTemplate.py:
912 Clean up commenting used by _edit_config(), and fix bug where wrong comment
913 was repeatedly appended to make.conf.
914
915 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
916 src/GLIArchitectureTemplate.py:
917 Put some Linux-2.6 specific code under a if statement. Store list of
918 successfully mounted swap device for using swapoff. Add proper error checking
919 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
920 'file'. Clean up some redundant code (thanks to pychecker).'
921
922 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
923 Fix typos: get_extended() instead of get_extended_partition(). Added
924 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
925 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
926
927 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
928 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
929 in add_network_interface.
930
931 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
932 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
933 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
934 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
935 prepare_chroot.
936
937 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
938 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
939 +src/fe/installer-gtk:
940 Add new automated CLI frontend. Add scripts that are the intended means to
941 use each frontend.
942
943 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
944 src/GLIClientController.py:
945 Add null type to network config, for cases where the interface is already up
946 and should not be touched (netboot for example).
947
948 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
949 src/GLIArchitectureTemplate.py:
950 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
951 string!. Try to use binary packages if available by default.
952
953 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
954 src/GLIArchitectureTemplate.py:
955 More error checking for _add_to_runlevel, to ensure that the init script
956 actually exists before we try to add it. set_services phase must take place
957 after the package installation, otherwise the init scripts might not exist.
958 Find the correct init script for the cron and logging daemons, and add that
959 instead of the package atom.
960
961 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
962 src/GLIArchitectureTemplate.py:
963 Fix up _edit_config so that it works if the file doesn't already exist. Fix
964 usage of 'file' to 'contents' for the variable name, as it shadows
965 __builtin__.file.
966
967 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
968 src/GLIArchitectureTemplate.py:
969 Add MTA install code, and include MTA install phase. Ensure
970 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
971 for 'none' kernel config for build_kernel phase. Put kernel_script in
972 /var/tmp instead of /root for build_kernel phase.
973
974 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
975 Rename mta variables to match syslog/cron variables.
976
977 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
978 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
979 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
980 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
981 src/templates/.cvsignore, src/tests/.cvsignore:
982 Refactor partition formatting again to include error checking. Allow 'none'
983 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
984
985 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
986 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
987 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
988 only have a single spawn call.
989
990 11 Jun 2005; Preston Cody <codeman@gentoo.org>
991 refixed samyron's fix of set_architecture_template.
992
993 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
995 be executable.
996
997 10 Jun 2005; Scott Myron <samyron@gentoo.org>
998 Fixed one of the FIXME's in the ClientConfiguration. There is now some
999 error checking when you call set_architecture_template.
1000
1001 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1002 moved the mkfsopts input to the partition options menu instead of the during
1003 the creation process. updated GenDialog to say it supports reiserfs v3.
1004
1005 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1006 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1007 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1008 Add support for other partition types to dialogfe.
1009 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1010 avoid integer overflows and wraparounds.
1011
1012 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1013 Removed start/end from XML output and added mkfsopts to partitioning info.
1014 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1015 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1016 in GLIClientConfiguration. Change from .1 and .9 to constants for
1017 partitioning. Fix free space overwriting bug. Remove a few unused functions
1018 from rewrite. Fix call to get_partition_at()
1019
1020 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1021 Updates to GenDialog and dialogfe.
1022
1023 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1024 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1025
1026 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1027 more GenDialog updates to partitioning.
1028
1029 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1030 Indenting issue in GLISD/get_ordered_partition_list.
1031 updates to GenDialog partitioning and added default UTC for timezone in IP.
1032
1033 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1034 Added GLISD.get_model()
1035
1036 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1037 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1038 More updates to GenDialog :)
1039
1040 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1041 Added get_interface_realname() function.
1042
1043 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1044 Added auto-save of CConfig and copying to new /root after install.
1045 yet even more GenDialog updates.
1046
1047 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1048 removed print statement from GLISD. more updates to GenDialog.
1049
1050 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1051 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1052 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1053 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1054 places in GLIClientConfiguration.
1055
1056 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1057 Fix mount_local_partitions(), configure_fstab(), and
1058 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1059 A few more fixes for templates/x86Archtemplate
1060
1061 27 May 2005; Preston Cody <codeman@gentoo.org>
1062 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1063 a work in progress.
1064
1065 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1066 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1067 directly. GLISD can now handle data imported from XML.
1068
1069 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1070 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1071 handle blank (no disklabel) disks.
1072
1073 20 May 2005; Preston Cody <codeman@gentoo.org>
1074 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1075 up, documented, and separated out serialization and grouped all sections.
1076
1077 19 May 2005; Preston Cody <codeman@gentoo.org>
1078 Reorganization of ClientConfiguration and gutting of unused functions.
1079 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1080
1081 18 May 2005; Preston Cody <codeman@gentoo.org>
1082 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1083
1084 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1085 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1086 partitioning. CC serializes install profile to disk and prepare_chroot()
1087 copies it into /mnt/gentoo/root
1088
1089 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1090 Moved URI parsing into new function parse_uri()
1091
1092 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1093 Added XMLParser module.
1094
1095 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1096 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1097 Minor fix to is_uri() regex to allow hyphens in hostname.
1098
1099 12 May 2005; Preston Cody <codeman@gentoo.org>
1100 Updated finishing_cleanup for new unmounting method from agaffney.
1101
1102 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1103 Fix GLILogger to use correct time format string. Fix _edit_config() to
1104 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1105 unicode support to is_realstring().
1106
1107 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1108 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1109 return value instead of non-zero. Add code to output a traceback to the
1110 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1111 instead of --nocolor.
1112
1113 10 May 2005; Preston Cody <codeman@gentoo.org>
1114 Added GLIGenDialog.py to make a generic class for the dialog functions that
1115 can be used by both dialogfe and the netfe/be. updated both for new filename.
1116 date changes. 2004->2005.
1117
1118 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1119 Removed 'quiet=True' from spawn() calls
1120
1121 10 May 2005; Preston Cody <codeman@gentoo.org>
1122 Updated GLIUtility with patches from chotchki. Also added documentation
1123
1124 9 May 2005; Preston Cody <codeman@gentoo.org>
1125 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1126 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1127 from bug #89683, mostly touchups.
1128
1129 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1130 GLIStorageDevice cleanup patch from bug #91761
1131
1132 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1133 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1134 _edit_config(). Error logging casts 'error' to str
1135
1136 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1137 Exceptions received in CC are logged before being passed to the FE. Added
1138 code to CC to handle exceptions *not* thrown by the installer itself.
1139
1140 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1141 get_max_mb_for_resize() returns -1 if not self.resizeable
1142
1143 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1144 More dirty rsync hacks :-/
1145
1146 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1147 Patches from chotchki (bug #90325) to improve CC networking. untested.
1148
1149 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1150 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1151 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1152 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1153 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1154 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1155 _get_packages_to_emerge()
1156
1157 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1158 Added group-adding code to set_users in ArchTemplate
1159
1160 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Added post-install script code
1162
1163 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1164 Fixed encapsulation issues in GLIClientController (bug #90141)
1165
1166 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 Update resizing code in GLIStorageDevice
1168
1169 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1170 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1171
1172 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 Reverted change to ArchTemplate and added support for commented line in old
1174 code.
1175
1176 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1177 Changed _edit_config() to modify value in-place instead of commenting out and
1178 adding the new value to the end of the file.
1179
1180 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1181 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1182 Also updated TODO list.
1183
1184 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1185 Use blackace's one-liner to add comments for all function for use with
1186 pythondoc.
1187
1188 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1189 Moved 'end >= device_sectors' check out of loop to check for next partition's
1190 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1191 Partitioning code now tracks start/end of extended for placing logicals. End
1192 point of logical is now adjusted along with start.
1193
1194 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1195 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1196 the way of partitioning from a blank disk. Add int() around access to minor
1197 key in partition information due to new partition code leaving them as float.
1198
1199 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1200 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1201
1202 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1203 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1204
1205 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1206 Added support for DHCP options and MAC addresses in the InstallProfile.
1207
1208 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1209 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1210 sed to properly strip out junk.
1211
1212 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1213 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1214 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1215
1216 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1217 Fixed indent problem in GLICController
1218
1219 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1220 Check for disklabel type "loop" and use the device name without a minor.
1221
1222 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1223 Remove /tmp/compile_output.log and /var/log/install.log when install is
1224 complete. Added code to (hopefully) keep 2nd thread running after install.
1225 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1226 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1227 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1228
1229 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1231 when unpacking tarball.
1232
1233 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1234 rewrote filesystem_tools. looks like it works so ripping out all the old
1235 filesystem_tools code.
1236
1237 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1238 Changed the print statements to logging in the partitioning BE code.
1239 the logger may need to be imported to the x86archtemplate. unknown yet.
1240 Added the finishing_cleanup function.
1241 added a fix to the logger from BenUrban
1242
1243 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1244 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1245 URIs. The blank uri check has been commented out.
1246 ripped out error checking of set_services. this is done by _add_to_runlevel.
1247
1248 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1249 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1250
1251 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1252 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1253 the install profile if available. Commented out spawn() debugging prints
1254
1255 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1256 small changes to setup_network_post. moved adding to runlevel of net.x to
1257 after the device gets symlinked. added domainname runlevel command.
1258
1259 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1261 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1262 spawn() call in livecd-kernel code to pass environment variables.
1263 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1264 the install profile if available.
1265
1266 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1267 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1268 to handle installing the livecd kernel into the new system.
1269
1270 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1271 should emerge hotplug and coldplug before adding them to runlevel.
1272
1273 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1274 took chroot out of grub_install command.
1275
1276 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1277 Changed chroot wrapper code in spawn() to write the wrapper the python way
1278 instead of the bash way to avoid quote conflicts. Added
1279 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1280 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1281 as it breaks the piping.
1282
1283 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1284 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1285
1286 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1287 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1288 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1289 GLIInstallProfile.
1290
1291 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1292 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1293 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1294 into /mnt/gentoo in prepare_chroot()
1295
1296 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1297 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1298 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1299 to start/end sectors
1300
1301 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 Add 2>&1 to cmd in spawn()
1303
1304 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 Modified GLIUtility.exitsuccess() to work with return value from
1306 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1307 creates wrapper script for commands run inside chroot so multiple commands
1308 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1309 for the generated script from spawn()
1310
1311 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1312 Removed default values for stage tarball URI and portage tree URI from
1313 InstallProfile. These should be set by the FEs. also added services step to
1314 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1315 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1316
1317 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1318 Small fix for setting the default gateway. Also added feature to dialogfe.
1319
1320 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1322
1323 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1324 Fixed a bunch of true -> True typos. lots of em
1325 only write new resolv.conf if there are dns servers listed.
1326
1327 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Commented out 'display_on_tty8=True' in start_portmap()
1329
1330 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1331 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1332
1333 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1335 lang parameter to __init__()
1336
1337 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1338 updates to TODO list.
1339
1340 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1341 Initial code for quickpkg GRP support. Fix loop to grab packages from
1342 'emerge -p blah'
1343
1344 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1345 check for dhcp in the network stuff and emerge it if it is.
1346 added quickpkg to TODO list
1347
1348 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1349 Changed the raising of 'warning' exceptions to a simple log of the error
1350 so that the installer can continue.
1351
1352 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1353 Some big changes. First, changed most output to display_on_tty8.
1354 Second, added log lines to all templates. Some smaller fixes such as typos.
1355 Also did some cleanups of old commented lines.
1356
1357 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1359 Undo change with fix. Escaping fix in GLIStorageDevice.py
1360
1361 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1362 more updates to TODO list. hopefully we'll soon start removing items instead
1363 of adding them.
1364
1365 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1366 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1367
1368 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1369 updated TODO list. (again)
1370
1371 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1372 changed output of portmap start to display_on_tty8.
1373 fixed bootloader for udev and multiple kernels
1374 fixed custom kernel config (again)
1375
1376 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1377 changed default value of CC._enable_ssh to True because this is smart.
1378 added code to allow custom kernel .config. may be unstable and break. sorry.
1379
1380 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 partition() now waits until after it checks for partition flags before delete
1382 the partitions :P
1383
1384 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1386 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1387 blank.
1388
1389 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1390 Various fixes related to the add_users function. Still not yet finished.
1391 Added things to the TODO list. Lets start using that!
1392
1393 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1394 Added code to x86Template to format newly created partitions. Also added
1395 some error checking code. GLIStorageDevice passes 'minor' with data to
1396 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1397 mounting code.
1398
1399 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1400 Took out unnecessary setting of random livecd root password. the cd already
1401 sets it randomly.
1402
1403 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1404 Took out an unneeded step from CC's run()
1405
1406 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1407 Attempt at detecting and adding windows partitions to lilo.
1408
1409 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1410 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1411 partition. fixed misc exit_status => exitstatus typo.
1412
1413 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1414 Added basic code for resizing filesystems with pyparted. Fixed code for
1415 resizing ntfs and ext2/3.
1416
1417 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1418 Fixed partition() in x86Template so that it scans through logicals and deletes
1419 before deleting containing extended partition. Also clears partition table to
1420 be safe before third pass.
1421
1422 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1423 Added mount_network_shares. not able to test it from this computer.
1424 will test when i get back to school.
1425 also added start_portmap to the client_controller as an always-do.
1426 agaffney says this is needed for NFS mounts to work.
1427
1428 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1429 Partial rewrite of partitioning code in x86Template. No longer shells out to
1430 parted to perform actions, now uses all pyparted calls. Code "works" in a
1431 test, but still needs lots of TLC. Also modified tests/install.py to work
1432 with x86Template and GLIClientConfiguration.
1433
1434 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 Initial move of partitioning code from ArchTemplate to x86Template.
1436
1437 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1438 Added grp_install and services to InstallProfile. forgot about the set_root_password
1439
1440 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1441 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1442 Test Install ran very well (skipping partitioning).
1443
1444 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1445 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1446 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1447 some may still have eluded me.
1448
1449 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1450 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1451 Just finished mount_local_partitions in GLIArchitectureTemplate
1452
1453 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1454 Added get_num_sectors() to GLIStorageDevice.
1455
1456 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1457 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1458 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1459 from GLIInstallProfile.
1460
1461 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1462 GLIStorageDevice returns "unknown" instead of "" for get_type()
1463
1464 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1465 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1466 actually work. Commented out resizability checking code for speed.
1467
1468 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1469 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1470 GLIStorageDevice at the suggestion of plors
1471
1472 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1473 Added a function to GLIUtility to pull a value from a make.conf-style config
1474 file. Minor type fix to GLIInstallProfile.py
1475
1476 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1477 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1478 network mounts from partition data structure in GLIInstallProfile
1479
1480 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1481 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1482 can be resized.
1483
1484 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1485 Added some of the final functions to GLIInstallTemplate.
1486 Yes this project is still active despite rare use of the Changelog!
1487
1488 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1489 Added the GLIPartitionTools.py file. This is a temporary insertion of
1490 partitioning tools that will eventually go into their own package.
1491
1492 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1493 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1494 for the program). Added __init__(install_profile, client_configuration) to
1495 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1496 to avoid constantly passing stuff every time we call a method.
1497
1498 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1499
1500 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1501 files without messing up all the other stuff in them. This will be used for making
1502 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1503
1504 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1505
1506 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1507 have a few basic things. I added two private methods. One is _depends(). This
1508 will be used for dependency checking (ie. unpacking a tarball requires that
1509 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1510 same syntax as os.system(), however, instead of being run in the liveCD
1511 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1512 isolated the code. Hope to work more this week to get this class formed...
1513
1514 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1515
1516 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1517 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1518 to allow for easier modification (mutable, rather than immutable objects). Updated
1519 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1520 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1521 Added initial unit test code.
1522
1523 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1524
1525 Added initial changelog. Setting up the basic structure of the CVS repository
1526 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1527 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20