/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1220 - (show annotations) (download)
Fri Jan 6 04:39:05 2006 UTC (8 years, 6 months ago) by codeman
File size: 65003 byte(s)
  AT: bootsplash is now gensplash
  gliserv: add advanced_mode to shared_info
  webgli: Added advanced mode.  mostly just disables a few screens.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.564 2006/01/06 04:39:05 codeman Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 5 Jan 2006; Preston Cody <codeman@gentoo.org>
9 AT: bootsplash is now gensplash
10 gliserv: add advanced_mode to shared_info
11 webgli: Added advanced mode. mostly just disables a few screens.
12
13 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
14 src/GLIPortage.py:
15 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
16 added emerge()
17 update sub-progress after each package is emerged
18 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
19 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
20 remove link if it exists before moving content into place
21 src/GLIArchitectureTemplate.py:
22 install_packages() now calls emerge() in GLIPortage
23 change all calls to self._emerge() to self._portage.emerge()
24 comment out all emerge status checking...using exceptions now
25 call copy_pkg_to_chroot() directly for livecd-kernel
26
27 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIArchitectureTemplate.py:
29 remove add_pkg_to_world() and copy_pkg_to_chroot()
30 copy installer.log to installer.log.failed on install failure
31 src/GLIUtility.py:
32 added get_keymaps()
33 spawn() takes any False argument for chroot instead of just None
34 src/GLIPortage.py:
35 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
36 change copy_pkg_to_chroot() to work properly with use_root=False
37 figure PORTAGE_TMPDIR properly
38
39 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
40 src/net/server/html/*:
41 converted showclients, load/saveprofile
42
43 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
44 src/GLIPortage.py:
45 exclude packages already in chroot vdb from binary deplist
46 chroot to use best_version for chroot's vdb
47 src/runtimedeps.py:
48 accept ROOT via commandline instead of env
49
50 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
51 src/runtimedeps.py:
52 remove passing of ROOT
53 src/GLIPortage.py:
54 modify get_deps() to get deptree for each package and merge into final list
55 remove depgraph class
56 add debugging code to get_deps()
57 src/GLIArchitectureTemplate.py:
58 combine code for GRP/compile in install_packages() into one block
59 debugging code in install_packages()
60
61 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
62 src/runtimedeps.py:
63 initial commit
64 src/GLIPortage.py:
65 use separate script for GRP deps
66 remove calls to portage module
67
68 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
69 src/GLIPortage.py:
70 initial commit
71 move some of portage function from GLIAT
72 flipped around a few function args
73 src/GLIArchitectureTemplate.py:
74 revamp install_packages() for new GLIPortage
75
76 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
77 src/GLIArchitectureTemplate.py:
78 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
79
80 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
81 src/net/server/gliserv.py:
82 wrap generated code in a class to isolate it a bit better
83 302 redirects work
84 don't use cgi.escape() for <% %>
85 src/net/server/html/webgli/*:
86 load/save profile
87 src/GLIUtility.py:
88 change /sbin/lspci to just lspci
89
90 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIClientController.py:
92 change ordering of statements in CC run() while loop to not go past the end
93 of the array
94 src/GLIArchitectureTemplate.py:
95 removed redundant bind mounts
96
97 18 Dec 2005; Preston Cody <codeman@gentoo.org>
98 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
99 added a diagram by blackace from last night.
100 added the glossary in RTF format.
101
102 17 Dec 2005; Preston Cody <codeman@gentoo.org>
103 x86AT: separated out emerge/configure from running of bootloader
104 added MBR drive support to lilo.
105 these changes will likely not work.
106 AT: added setup_and_run_bootloader step.
107
108 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
109 src/net/server/gliserv.py:
110 call generated code in a function
111 src/net/server/html/webgli/*:
112 include top/bottom
113 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
114 src/GLIClientCongifuration.py:
115 install mode magic
116
117 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
118 src/GLIClientController.py:
119 use GLIException when there's an import problem
120 added debug code to show install_steps
121 src/templates/amd64ArchitectureTemplate.py:
122 add . to import path
123 proper path this time: ../../templates
124 src/GLIArchitectureTemplate.py:
125 add _portage_best_version() function
126
127 11 Dec 2005; Preston Cody <codeman@gentoo.org>
128 added initial glossary and gimli diagram to the docs directory.
129 modify gli-dialog to allow editing of the install_profile after loading XML.
130
131 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
132 src/net/server/html/webgli/:
133 converted globaluse, localuse, networkmounts, portagetree, and stageselection
134 moved saveclientconfig stuff into clientconfig
135 moved saveconfigfiles into config files
136 converted etc_portage and makedotconf
137 converted bootloader and kernel
138 convert daemons, extrapackages, networking, review, services, timezone, users
139 src/net/server/gliserv.py:
140 proper 404 handling for .pyhtml extension
141 HTML escape <% %> stuff
142 work around python's sucky regexes
143 src/GLIInstallProfile.py:
144 allow set_{rsync,ftp,http}_proxy() to accept empty values
145
146 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
147 src/net/server/gliserv.py:
148 initial commit of Legolas templating engine
149 302 redirects
150 src/net/server/html/index.html, src/net/server/webgli_template.html:
151 minor changes for new code
152 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
153 initial commit of the conversion from the monolithic WebGLIHandler.py to the
154 one file per path Legolas goodness
155 partitioning[2-4] done
156
157 5 Dec 2005; Preston Cody <codeman@gentoo.org>
158 webgli: dhcp options in CC and post-install.
159 updated comparison chart.
160 webgli: etc/portage/* and distcc support added. not too-well tested.
161
162 4 Dec 2005; Preston Cody <codeman@gentoo.org>
163 webgli_template.html: valign=top on left side.
164 webgli: fix bootloader boot_device. now working.
165 webgli: CC proxy done. post-install proxy in progress.
166
167 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
168 src/net/server/webgli_template.html:
169 increase padding for content cell to 7px and add colspan=2
170
171 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
172 webgli: added graphic bar on top
173 webgli: added hover effects on the links on the left
174 webgli: re-rendered header_bg.png to stretch without artifacts
175
176 3 Dec 2005; Preston Cody <codeman@gentoo.org>
177 webgli: make.conf disabling fixes for dynamic_stage3
178 fixed portage snapshot browse popup
179 all changes tested.
180 webgli: add debug mode to CC screen. the screen still needs lots of work.
181
182 1 Dec 2005; Preston Cody <codeman@gentoo.org>
183 added debug mode question to gli-dialog
184 added CC proxies to CC networking for gli-dialog
185 webgli: fixed skip CC networking if connection active
186 webgli: portage snapshot defaults to CD
187 webgli: bootloader mbr drive selection
188 webgli: USE flags unselectable if dynamic_stage3
189 webgli: manual extra packages and save button.
190
191 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
192 src/GLIUtility.py:
193 change ping count to 2
194 docs/comparison.html
195 initial commit
196
197 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/templates/x86ArchitectureTemplate.py:
199 fix map() issue with grub code
200 replace kernel_names and initrd_names loops with one-liners
201
202 27 Nov 2005; Preston Cody <codeman@gentoo.org>
203 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
204 initial gli-dialog support for recommended partitioning layout and clear.
205 failure cleanup now an option for gli-dialog.
206 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
207 added comparison list and updated TODO!
208
209 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIArchitectureTemplate.py:
211 fix to stage1() debug code
212 fix to stage2() debug code
213
214 26 Nov 2005; Preston Cody <codeman@gentoo.org>
215 some more bootloader code fixes. forgot boot_device != mbr_device.
216
217 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
218 src/GLIStorageDevice.py:
219 fix to unallocated space merging when last one is after part 4
220
221 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
222 src/GLIArchitectureTemplate.py:
223 small fix to debugging code in copy_pkg_to_chroot()
224
225 23 Nov 2005; Preston Cody <codeman@gentoo.org>
226 more bugfixes with bootloader code
227 gli-dialog side appears to work
228
229 21 Nov 2005; Preston Cody <codeman@gentoo.org>
230 initial adding of boot_device to backend.
231 initial boot_device support added to gli-dialog.
232 some fixes of my poor coding
233
234 20 Nov 2005; Preston Cody <codeman@gentoo.org>
235 converted gli-dialog to use the install_package_list.
236 gtkfe has already been converted by AllanonJL
237 new way working in gli-dialog now and added to webgli.
238 added set/get_boot_device() to IP
239
240 19 Nov 2005; Preston Cody <codeman@gentoo.org>
241 get_install_package_list added to InstallProfile. This can be used by the FEs
242
243 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
244 src/templates/x86ArchitectureTemplate.py:
245 call ls with '-1 --color=no'
246
247 16 Nov 2005; Preston Cody <codeman@gentoo.org>
248 added warning (#9) to GRP ppl about stage3 tarballs
249
250 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
251 src/GLIArchitectureTemplate.py:
252 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
253 confused
254
255 13 Nov 2005; Preston Cody <codeman@gentoo.org>
256 removed protocols from rc.conf screens
257 finished initial rc.conf and make.conf in webgli
258
259 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
260 src/net/server/gliserv.py:
261 add -h option to usage()
262 show time and request URI in debug mode
263 show client IP in debug mode
264 just use IP instead of trying to do a reverse lookup
265
266 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
267 src/net/server/gliserv.py:
268 'classier' 401 message
269 proper commandline parsing
270 help via -h
271 user/pass can be specificed via commandline option
272
273 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
274 src/net/server/gliserv.py:
275 basic HTTP auth
276
277 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
278 src/net/server/gliserv.py:
279 dynamic module reloading (yipee!)
280 send 'Last-Modified' header for real files
281 respond to HEAD with just headers
282 src/net/server/handlers/WebGLIHandler.py:
283 icons for drives
284
285 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
286 src/net/server/handlers/WebGLIHandler.py:
287 initial 'pretty' partition table display support
288 clicking partition in 'pretty' display works instead of radio buttons
289 radio buttons and pretty display work together
290 META redirect instead of javascript
291 pretty display stretches across entire screen
292 'Recommended layout' and 'Clear drive' functions
293 properly catch exceptions from do_recommended()
294 src/GLIArchitectureTemplate.py:
295 replace preinst, copy, postinst, rm steps with qmerge
296 whoops...that shouldn't have been commented out
297 create image_dir with -p in copy_pkg_to_chroot()
298 more generic of symlink crappiness
299 new copy_pkg_to_chroot() actually works now
300
301 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
302 src/GLIStorageDevice.py:
303 initial generic disk support
304 fixes for add_partition() code
305 src/net/server/handlers/WebGLIHandler.py:
306 added support for creating generic disks
307 add new partition working
308 save and delete partitions
309
310 6 Nov 2005; Preston Cody <codeman@gentoo.org>
311 webgli: Partitioning making progress.
312
313 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
314 src/GLIArchitectureTemplate.py:
315 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
316 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
317 dir) and works around /etc/gconf symlink problem
318
319 5 Nov 2005; Preston Cody <codeman@gentoo.org>
320 webgli: lots of updates. preliminary partitioning. extra packages works.
321
322 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
323 src/net/server/gliserv.py:
324 httpd now supports HTTPS and falls back to HTTP if not available
325 make fallback actually work
326 src/net/server/SecureXMLRPCServer.py:
327 SecureSocketServer is now threaded
328
329 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
330 src/net/client/gliclient.py:
331 try to use HTTPS for XMLRPC first and fallback to HTTP
332 pretend mode
333 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
334 HTTPS XMLRPC goodness from samyron
335 pass name of certificate
336
337 31 Oct 2005; Preston Cody <codeman@gentoo.org>
338 wegli: daemons and services screens done.
339
340 30 Oct 2005; Preston Cody <codeman@gentoo.org>
341 webgli: networking and users screens
342 added return_redirect to handler.py
343 loading and saving install/client profiles works for webgli now
344 Review also done
345
346 *GLI-0.2 (27 Oct 2005)
347
348 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
349 src/templates/x86ArchitectureTemplate.py:
350 properly check for bootloader emerge exist status with exitsuccess()
351 log output of grub install command
352 add --batch --no-floppy to grub command
353 grubinstallstring only gets logged if debug is on
354 src/GLIUtility.py:
355 update progress bar to 100% when process finishes
356
357 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
358 src/GLIClientController.py:
359 added debugging code for the interaction between the 2 threads via Event()
360 src/GLIUtility.py:
361 doubled the buffer size in spawn()
362 bump buffer size up to 16384
363 only report progress in 5% increments
364 src/GLIArchitectureTemplate.py:
365 kernelpkgs.txt support code
366 above disabled because it sucks
367 added add_pkg_to_world()
368
369 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
370 src/GLIArchitectureTemplate.py:
371 use tar | tar to copy files in copy_pkg_to_chroot()
372 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
373
374 23 Oct 2005; Preston Cody <codeman@gentoo.org>
375 DEBUGGING ADDED TO AT. verbose field added to CConfig.
376
377 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
378 src/net/server/gliserv.py:
379 / maps to index.html
380 look for actual files in html/
381 src/net/html:
382 new template
383 src/GLIUtility.py:
384 added parse_vdb_contents()
385 src/GLIArchitectureTemplate.py:
386 added copy_pkg_to_chroot()
387 added debug code to dynamic-stage3
388 switch dynamic-stage3 to new method
389 lots of bug fixes from adding debug code
390
391 22 Oct 2005; Preston Cody <codeman@gentoo.org>
392 webgli initial bootloader support + changed make.conf.
393 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
394
395 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
396 src/GLIUtility.py:
397 horrible tangled mess of code that is tarball unpacking subprogress display
398 add unpack progress to portage snapshot
399 use read() instead of readlines() in spawn()
400 only update progress bar for whole percents
401
402 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
403 src/templates/x86ArchitectureTemplate.py:
404 change call to 'grub' to use GLIUtility.exitsuccess()
405 add definition of 'build_mode' in _configure_lilo()
406 src/misc/updategtkfe, src/misc/updateglid:
407 fix so subshell is called in root shell
408
409 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/server/handlers/WebGLIHandler.py:
411 stage screen launches URI browser in sized window with various properties set
412
413 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/misc/updategtkfe:
415 updated to actually work
416 remove previous snapshot and extracted dir before downloading
417 src/misc/updateglid:
418 updated to actually work
419 src/templates/x86ArchitectureTemplate.py:
420 fixed bug where grub code was looking for 'root+root+file_name2'
421
422 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
423 src/net/server/handlers/WebGLIHandler.py:
424 URI browser
425 added mirror selection
426 src/GLIUtility.py:
427 ls via ssh strips off ending *
428
429 16 Oct 2005; Preston Cody <codeman@gentoo.org>
430 more updates to webgli. stage selection.
431
432 11 Oct 2005; Preston Cody <codeman@gentoo.org>
433 updated webgli with preliminary Network Mounts support.
434
435 9 Oct 2005; Preston Cody <codeman@gentoo.org>
436 GenDialog: string formatting and yes/no label fixes.
437 added WebGLI template for gliserv.py
438 added WebGLIHandler as well as a definition for it in gliserv.py
439 updates to the webgli files even though they won't be there for long.
440 Utility: remove exception for non-existant grppkgs.txt until the new livecd
441 goes public.
442
443 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
444 src/net/server/gliserv.py:
445 override dict to not be so anal
446 main server now loads separate module to handle requests
447 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
448 split out profile URLs into separate handler function
449 move handlers into subdirectory
450 add Welcome and Clients handlers
451
452 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
453 src/GLIUtility.py:
454 raise exception if password prompt received twice
455
456 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
457 src/GLIUtility.py:
458 removed rot13ify()
459
460 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
461 src/net/server/gliserv.py:
462 allow for param to be passed multiple times in GET
463 no XMLRPC functions return None
464 modify POST request parsing to only create a list if needed
465 fix GET request parsing so the list creation for multiple values works
466 src/net/client/gliclient.py:
467 various typo and type mismatch fixes
468 exit after exception
469
470 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
471 src/net/client/gliclient.py:
472 initial commit
473 pass MAC to XMLRPC functions
474 src/net/server/GLIServerProfile.py:
475 rename GLIClientsProfiles to GLIServerProfile
476
477 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
478 src/net/server/gliserv.py:
479 now handles POST requests
480 move majority of request handling code to common_handler() to reduce code
481 duplication
482 profile loading
483 client reg via XMLRPC goes into SharedInfo()
484 /showclients redesign
485 template fixes
486 allow handler functions to add/change headers
487 save profile
488
489 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
490 src/net/server/GLIClientsProfiles.py:
491 initial commit
492 src/net/server/template.html:
493 initial commit
494 src/net/server/gliserv.py:
495 add template mojo
496
497 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
498 src/net/server/gliserv.py:
499 XMLRPC mojo
500
501 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
502 src/GLIArchitectureTemplate.py:
503 add code in _edit_config() to comment line where variable is defined
504 previously
505 insert new line under previous definition of variable if it exists
506 small _edit_config() cleanup
507 src/GLIStorageDevice.py:
508 add clear_partitions() function
509 new sizes for recommended partition layout
510 automatically calculate swap size for recommended layout
511
512 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
513 src/templates/x86ArchitectureTemplate.py:
514 fat16 mojo
515
516 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
517 src/GLIStorageDevice.py:
518 prevent do_recommended() from being run twice
519 rewrite do_recommended() to be more robust
520 src/GLIArchitectureTemplate.py:
521 rework _edit_config() to not write duplicate entries
522
523 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
524 src/GLIStorageDevice.py:
525 added do_recommended() function to automatically created 256M/1G/* layout
526
527 17 Sep 2005; Preston Cody <codeman@gentoo.org>
528 src/gli-dialog.py: added set_distcc to the list
529 GenDialog: added set_distcc. untested.
530 IP: added install_distcc flag.
531 AT: added install_distcc function based on the flag. runs after build_kernel
532 changed AT spawn command for distcc for nodeps.
533
534 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
535 src/GLIUtility.py:
536 add rot13ify() function
537
538 16 Sep 2005; Preston Cody <codeman@gentoo.org>
539 src/GenDialog.py
540 added a sentence of text. unchecking support added.
541
542 15 Sep 2005; Preston Cody <codeman@gentoo.org>
543 src/GLIUtility.py
544 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
545 src/GenDialog.py
546 still working on extra_packages. transformed the list to new format.
547 added GRP indication to list. untested.
548 TODO lists updated.
549 src/fe/dialog/gli-dialog.py
550 spelling mistook.
551
552 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/GLIUtility.py:
554 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
555
556 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
557 src/GLIUtility.py:
558 add get_directory_listing_from_uri()
559 add http support to above
560 add ftp support to above
561 add scp support to above
562 src/GLIArchitectureTemplate.py:
563 "0" instead of 0 for key of single-element dict passed to _edit_config()
564
565 5 Sep 2005; Preston Cody <codeman@gentoo.org>
566 value_only -> only_value
567
568 3 Sep 2005; Preston Cody <codeman@gentoo.org>
569 gutted out all of etc_portage structure since it is now all handled by
570 etc_files
571
572 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
573 src/GLIArchitectureTemplate.py:
574 install_packages() sends progress update notifications
575 src/templates/x86ArchitectureTemplate.py:
576 increase sleep to 5s between format tries
577 src/GLIClientController.py:
578 pass 'self' to AT instead of 'self._pretend'
579
580 2 Sep 2005; Preston Cody <codeman@gentoo.org>
581 logger -> logger.log in x86AT
582
583 1 Sep 2005; Preston Cody <codeman@gentoo.org>
584 added set_etc_portage to IP. debugging gli-d's support for it.
585
586 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
587 src/templates/x86ArchitectureTemplate.py:
588 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
589
590 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/GLIArchitectureTemplate.py:
592 add _portage_best_version() function and rework install_packages() to allow
593 for future X of Y tracking
594 Use best_visible instead of best_version
595 tracked down and fixed missing = causing empty install extra packages
596 use = when emerging also
597 quickpkg hokey pokey
598 run _get_packages_to_emerge() again with -pk
599
600 22 Aug 2005; Preston Cody <codeman@gentoo.org>
601 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
602 the end of install_packages.
603 added updateglid to /src/misc
604 updated all core files with new GPL notice and copyright statement.
605
606 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/GLIUtility.py:
608 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
609 a snapshot in /mnt/cdrom/snapshots/
610 get_snapshot_from_cd() adds file:// at the beginning
611 change calls to extra package special case functions to 'self.blah'
612
613 21 Aug 2005; Preston Cody <codeman@gentoo.org>
614 src/ArchTemplate: changed "voodoo".
615 changed order of portage sync methods. made a fallback to webrsync if
616 normal emerge sync fails.
617 removed get_sources_from_cd because it is obsolete.
618 add special cases to install_packages. remove fatal exception on package
619 install failure b/c the box will still be bootable.
620 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
621 handled in the FEs.
622 src/GenDialog: added a bunch of code for dealing with x11-based packages.
623 awaiting testing.
624
625 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/GLIStorageDevice.py:
627 global try/except block around fs resizable detection code
628 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
629 install-failed cleanup function
630
631 18 Aug 2005; Preston Cody <codeman@gentoo.org>
632 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
633
634 16 Aug 2005; Preston Cody <codeman@gentoo.org>
635 GLIGenDialog:
636 add drive choices for loaded configs.
637 force snapshot for dynamic_stage3
638 init the snapshoturi input to the cd snapshot if not already selected.
639 if dynamic_stage3, skip the make.conf step.
640 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
641 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
642
643 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
644 src/GLIArchitectureTemplate.py:
645 manually call MAKEDEV in stage3-dynamic code
646 copy /etc/inittab.old to /etc/inittab in chroot
647 src/GLIUtility.py:
648 add beginning of validate_uri() function
649 add file:/// support to validate_uri()
650 single quotes when setting livecd password
651
652 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
653 src/GLIGenDialog.py:
654 change getmountpoint() to get_mountpoint()
655 src/misc/updategtkfe:
656 committed script to automatically download latest snapshot and run gtkfe
657 src/templates/x86ArchitectureTemplate.py:
658 fix _configure_lilo_add_windows() for IP -> GLISD stuff
659 src/GLIArchitectureTemplate.py:
660 give tmp_minor an initial value in mount_local_partitions so that the value
661 remain from the previous drive
662
663 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
664 src/templates/x86ArchitectureTemplate.py:
665 Fix _configure_lilo() for IP using GLISD stuff
666 src/GLIArchitectureTemplate.py:
667 install_cron_daemon() treats "none" specially
668
669 14 Aug 2005; Preston Cody <codeman@gentoo.org>
670 old patch from Steven Mertens to resolve bug #96642
671 numerous asthetic changes to GenDialog, no real functionality changes though.
672 strings renamed for global use if necessary.
673 fix all three parts of bug 102291
674 disable set_etc_portage until fully-written.
675
676 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
677 src/GLIClientController.py:
678 lower-case http/ftp proxy envvars
679
680 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
681 src/GLIClientController.py:
682 log end of pre_install steps to aid in debugging
683 src/templates/x86ArchitectureTemplate.py:
684 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
685
686 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
687 src/GLIArchitectureTemplate.py
688 check to make sure that the device node we're wait for to exist isn't of
689 type 'free'
690
691 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
692 src/GLIGenDialog.py:
693 convert install_packages to list in set_extra_packages()
694 check return code of checklist() call in "Manual" section
695 *actually* fix the first problem
696
697 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
698 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
699 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
700
701 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
702 src/GLIArchitectureTemplate.py:
703 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
704
705 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
706 Add CDATA support to SimpleXMLParser and add utility functions for it.
707
708 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
709 src/GLIArchitectureTemplate.py:
710 Fix case where vixie-cron is specified as a full package atom, as we still
711 don't want to run 'crontab /etc/crontab' for it.
712
713 *GLI-0.1 (3 Aug 2005)
714
715 30 Jul 2005; Preston Cody <codeman@gentoo.org>
716 add scp to list of is_uri() so GenDialog doesn't complain.
717 fixed livecd-kernel bug in bootloader code.
718 fixed gendialog for dynamic_stage3 instead of "networkless"
719 change bootloader to allow for both initrd and initramfs.
720 fix IP for dynamic_stage3.
721 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
722
723 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
724 Added full scp:// URI support to get_uri() in GLIUtility
725 Remove "networkless" from dynamic stage3 if locic.
726 Remove print statement from scp:// code.
727 Change scp code to check for "assword: " instead of "Password:"
728 Fix post-install network code to create net.eth1+ symlink correctly
729 Check to make sure pkg can be split on / and some debugging code
730 Add 2>dev/null to emerge call in _get_packages_to_emerge()
731 SimpleXMLParser handles True/False/None correctly now
732 Comment out above fix
733 Add partitioning wait-for-device-to-exist code to mount_local_partitions
734
735 28 Jul 2005; Scott Myron <samyron@gentoo.org>
736 Removed a FIXME in the GLIClientConfiguration that is no
737 longer needed.
738
739 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
740 Default to x86 in ClientConfig
741 Typo in build-a-stage3 code.
742 Remove MAKEDEV call in build-a-stage3 postscript.
743
744 26 Jul 2005; Preston Cody <codeman@gentoo.org>
745 Rewrote init of IP for gli-d. Other GenDialog updates.
746 allow network_type to be None in CConfig.
747
748 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
749 Add _dynamic_stage3 option to IP.
750 Add check for that option to dynamic stage3 code in ArchTemplate.
751 Fix code to determine default route in get_eth_info() in GLIUtility.
752 Fix serialization of dns-servers in ClientConfig.
753
754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
755 changed default values of cron/logger in IP.
756 moved GenDialog IP init out to the individual files. gli-dialog's version
757 will change quite a bit.
758
759 22 Jul 2005; Preston Cody <codeman@gentoo.org>
760 added ppcArchTemplate. blank now. working on yaboot.
761 modified ArchTemplate for amd64 and ppc custom kernels.
762 skeleton implementation of _configure_yaboot.
763 small fixes to other templates.
764
765 21 Jul 2005; Preston Cody <codeman@gentoo.org>
766 GenDialog updates. changed comment in IP.
767
768 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
769 src/GLIInstallProfile.py:
770 Fix codeman's screwup of changing the service seperator to ',' in the parser
771 without changing it in the serialization code! Also document this in a
772 comment so you find it easier. Everybody needs to make sure they update
773 their install profiles!
774
775 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
776 src/GLIArchitectureTemplate.py:
777 Fix casting of list to string and concat of None with string, as well as
778 commented prototype of checking that mounting actually worked (found a case
779 where mount can return success, but the mount won't be done).
780
781 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
782 src/templates/x86ArchitectureTemplate.py:
783 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
784 checking for the device, and sleeping 1 second each time.
785
786 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
787 src/templates/x86ArchitectureTemplate.py:
788 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
789 bootloader works again. Also rename _install_{grub,lilo} to
790 _configure_{grub,lilo} since they don't install the loaders anymore
791 themselves.
792
793 7 Jul 2005; Preston Cody <codeman@gentoo.org>
794 fix global USE flags to not include the arch types at the end.
795 updates to GenDialog and gli-d.
796
797 6 Jul 2005; Preston Cody <codeman@gentoo.org>
798 fixing bootloader code for no initrd and initrd->initramfs naming change.
799
800 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
801 Proper comments and parameters to GLIException in install_mta()
802 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
803 Add strip() to list_mirrors(), list_subarch_from_mirror() and
804 list_tarball_from_mirror() to eliminate blank last item.
805
806 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
807 Added stage3 generation code.
808
809 5 Jul 2005; Preston Cody <codeman@gentoo.org>
810 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
811 Mild changes to GenDialog.
812
813 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
814 Remove separate install step configure_rc_conf() since it's handled by
815 update_config_files()
816 Make a copy of newvalues in _edit_config() so quotes aren't added when the
817 function is called twice on the same file.
818
819 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
820 Missing \ in sed in _get_packages_to_emerge()
821 Removed explicit emerging of hotplug and no longer add it to the runlevel.
822 Check in _quickpkg_deps() to ignore blank package names returned from
823 _get_packages_to_emerge()
824
825 28 Jun 2005; Preston Cody <codeman@gentoo.org>
826 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
827 in the dialog.py gauge code.
828
829 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
830 Add code to update_config_files() to go through etc_files and update stuff.
831 Check to see that _etc_files['make.conf'] exists in get_make_conf()
832 Only use float() in partition xml parsing code if type == "free"
833
834 28 Jun 2005; Preston Cody <codeman@gentoo.org>
835 finished almost all internationalization of GenDialog.
836 attempt at fixing rc.conf function. moved 3 generate functions out of
837 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
838 added dialog.py to the fe/dialog directory so it actually gets used.
839
840 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
841 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
842
843 27 Jun 2005; Preston Cody <codeman@gentoo.org>
844 fix extra entry in list_mirrors()
845 beginning internationalization runthrough.
846
847 26 Jun 2005; Preston Cody <codeman@gentoo.org>
848 added dialog.py to /src temporarily until it gets accepted upstream.
849 fix for unused value in form in dialog.py and changed heights.
850 fix GenDialog forms.
851
852 25 Jun 2005; Preston Cody <codeman@gentoo.org>
853 Changed hostname/domainname for new baselayout.
854 Changed _add_to_runlevel errors to logs.
855 Updated TODO list to show status of GenDialog
856 More updates to GenDialog including two checklists that probably won't work.
857 update IP to use comma-separated list instead of space separated for services.
858
859 24 Jun 2005; Preston Cody <codeman@gentoo.org>
860 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
861 GenDialog as it gets closer to completion.
862
863 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
864 Modify get_eth_info() to take a full interface name (eth0 fex). float()
865 instead of int() in add_partition_device_partition() for minor (closes 96804)
866
867 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
868 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
869 instead of 'interfaces[interface][1]' since DHCP uses that field for its
870 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
871
872 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
873 Apply spawn() patch from #96644 (with minor changes). Make sure the return
874 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
875 small error with <pipe>.close() returning None. Fix space vs. tab issue.
876 Fix undefined variable 'output' issue in spawn().
877
878 20 Jun 2005; Preston Cody <codeman@gentoo.org>
879 More updates to GenDialog and gli-d.
880
881 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
882 Modify list_mirrors() to return a list of mirror URL/name pairs.
883
884 19 Jun 2005; Preston Cody <codeman@gentoo.org>
885 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
886 get subarch.
887
888 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
889 Backend partitioning will create disklabel is none exists. Installprofile
890 defaults to "" now instead of "msdos" for disklabel type. Fix for
891 mount_local_partitions() to remember device along with minor in the
892 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
893 add else block to log unsupported netmount types to mount_network_shares()
894
895 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
896 src/GLIArchitectureTemplate.py:
897 Refactor kernel_compile common stuff, fix 2.4 build process.
898 src/fe/cli/clife.py:
899 Logging system.
900 src/GLIUtility.py, src/GLIStorageDevice.py:
901 Add comments about re-writes needed for boxes without sysfs.
902
903 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
904 src/GLIArchitectureTemplate.py:
905 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
906 'make dep' call for custom compile. build_mode support for prepare-only and
907 none types completed. custom compile function chains shell functions in
908 spawned script, to allow for catching all errors.
909
910 15 Jun 2005; Preston Cody <codeman@gentoo.org>
911 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
912 and GenDialog. other gendialog updates as well. kernel updates untested.
913
914 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
915 src/GLIInstallProfile.py:
916 Change structure of etc-portage stuff. The serialization was broken before my
917 last commit, and I am the only person that's ever used it. The new schema is
918 as follows:
919 <etc-portage>
920 <file name="package.mask"/>
921 <file name="package.unmask">
922 <entry atom="sys-kernel/openmosix-sources"/>
923 </file>
924 <file name="package.use">
925 <entry atom="sys-libs/db">
926 -java
927 </entry>
928 <entry atom="dev-libs/cyrus-sasl">
929 -ldap
930 </entry>
931 </file>
932 </etc-portage>
933
934
935 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
936 src/GLIInstallProfile.py:
937 Add new entry for gli-profile/kernel-build-method item. Add missing
938 serialize_etc_portage (temporary). Make serialize_make_conf always print the
939 keys in the same order.
940
941 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
942 src/GLIArchitectureTemplate.py:
943 Clean up commenting used by _edit_config(), and fix bug where wrong comment
944 was repeatedly appended to make.conf.
945
946 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
947 src/GLIArchitectureTemplate.py:
948 Put some Linux-2.6 specific code under a if statement. Store list of
949 successfully mounted swap device for using swapoff. Add proper error checking
950 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
951 'file'. Clean up some redundant code (thanks to pychecker).'
952
953 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
954 Fix typos: get_extended() instead of get_extended_partition(). Added
955 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
956 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
957
958 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
959 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
960 in add_network_interface.
961
962 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
963 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
964 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
965 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
966 prepare_chroot.
967
968 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
969 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
970 +src/fe/installer-gtk:
971 Add new automated CLI frontend. Add scripts that are the intended means to
972 use each frontend.
973
974 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
975 src/GLIClientController.py:
976 Add null type to network config, for cases where the interface is already up
977 and should not be touched (netboot for example).
978
979 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
980 src/GLIArchitectureTemplate.py:
981 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
982 string!. Try to use binary packages if available by default.
983
984 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
985 src/GLIArchitectureTemplate.py:
986 More error checking for _add_to_runlevel, to ensure that the init script
987 actually exists before we try to add it. set_services phase must take place
988 after the package installation, otherwise the init scripts might not exist.
989 Find the correct init script for the cron and logging daemons, and add that
990 instead of the package atom.
991
992 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
993 src/GLIArchitectureTemplate.py:
994 Fix up _edit_config so that it works if the file doesn't already exist. Fix
995 usage of 'file' to 'contents' for the variable name, as it shadows
996 __builtin__.file.
997
998 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
999 src/GLIArchitectureTemplate.py:
1000 Add MTA install code, and include MTA install phase. Ensure
1001 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1002 for 'none' kernel config for build_kernel phase. Put kernel_script in
1003 /var/tmp instead of /root for build_kernel phase.
1004
1005 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1006 Rename mta variables to match syslog/cron variables.
1007
1008 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1009 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1010 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1011 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1012 src/templates/.cvsignore, src/tests/.cvsignore:
1013 Refactor partition formatting again to include error checking. Allow 'none'
1014 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1015
1016 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1017 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1018 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1019 only have a single spawn call.
1020
1021 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1022 refixed samyron's fix of set_architecture_template.
1023
1024 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1025 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1026 be executable.
1027
1028 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1029 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1030 error checking when you call set_architecture_template.
1031
1032 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1033 moved the mkfsopts input to the partition options menu instead of the during
1034 the creation process. updated GenDialog to say it supports reiserfs v3.
1035
1036 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1037 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1038 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1039 Add support for other partition types to dialogfe.
1040 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1041 avoid integer overflows and wraparounds.
1042
1043 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1044 Removed start/end from XML output and added mkfsopts to partitioning info.
1045 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1046 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1047 in GLIClientConfiguration. Change from .1 and .9 to constants for
1048 partitioning. Fix free space overwriting bug. Remove a few unused functions
1049 from rewrite. Fix call to get_partition_at()
1050
1051 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1052 Updates to GenDialog and dialogfe.
1053
1054 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1055 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1056
1057 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1058 more GenDialog updates to partitioning.
1059
1060 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1061 Indenting issue in GLISD/get_ordered_partition_list.
1062 updates to GenDialog partitioning and added default UTC for timezone in IP.
1063
1064 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1065 Added GLISD.get_model()
1066
1067 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1068 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1069 More updates to GenDialog :)
1070
1071 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1072 Added get_interface_realname() function.
1073
1074 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1075 Added auto-save of CConfig and copying to new /root after install.
1076 yet even more GenDialog updates.
1077
1078 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1079 removed print statement from GLISD. more updates to GenDialog.
1080
1081 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1082 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1083 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1084 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1085 places in GLIClientConfiguration.
1086
1087 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1088 Fix mount_local_partitions(), configure_fstab(), and
1089 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1090 A few more fixes for templates/x86Archtemplate
1091
1092 27 May 2005; Preston Cody <codeman@gentoo.org>
1093 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1094 a work in progress.
1095
1096 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1097 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1098 directly. GLISD can now handle data imported from XML.
1099
1100 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1101 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1102 handle blank (no disklabel) disks.
1103
1104 20 May 2005; Preston Cody <codeman@gentoo.org>
1105 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1106 up, documented, and separated out serialization and grouped all sections.
1107
1108 19 May 2005; Preston Cody <codeman@gentoo.org>
1109 Reorganization of ClientConfiguration and gutting of unused functions.
1110 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1111
1112 18 May 2005; Preston Cody <codeman@gentoo.org>
1113 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1114
1115 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1116 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1117 partitioning. CC serializes install profile to disk and prepare_chroot()
1118 copies it into /mnt/gentoo/root
1119
1120 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1121 Moved URI parsing into new function parse_uri()
1122
1123 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1124 Added XMLParser module.
1125
1126 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1127 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1128 Minor fix to is_uri() regex to allow hyphens in hostname.
1129
1130 12 May 2005; Preston Cody <codeman@gentoo.org>
1131 Updated finishing_cleanup for new unmounting method from agaffney.
1132
1133 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 Fix GLILogger to use correct time format string. Fix _edit_config() to
1135 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1136 unicode support to is_realstring().
1137
1138 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1139 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1140 return value instead of non-zero. Add code to output a traceback to the
1141 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1142 instead of --nocolor.
1143
1144 10 May 2005; Preston Cody <codeman@gentoo.org>
1145 Added GLIGenDialog.py to make a generic class for the dialog functions that
1146 can be used by both dialogfe and the netfe/be. updated both for new filename.
1147 date changes. 2004->2005.
1148
1149 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1150 Removed 'quiet=True' from spawn() calls
1151
1152 10 May 2005; Preston Cody <codeman@gentoo.org>
1153 Updated GLIUtility with patches from chotchki. Also added documentation
1154
1155 9 May 2005; Preston Cody <codeman@gentoo.org>
1156 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1157 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1158 from bug #89683, mostly touchups.
1159
1160 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 GLIStorageDevice cleanup patch from bug #91761
1162
1163 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1164 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1165 _edit_config(). Error logging casts 'error' to str
1166
1167 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1168 Exceptions received in CC are logged before being passed to the FE. Added
1169 code to CC to handle exceptions *not* thrown by the installer itself.
1170
1171 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 get_max_mb_for_resize() returns -1 if not self.resizeable
1173
1174 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1175 More dirty rsync hacks :-/
1176
1177 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1178 Patches from chotchki (bug #90325) to improve CC networking. untested.
1179
1180 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1182 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1183 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1184 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1185 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1186 _get_packages_to_emerge()
1187
1188 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1189 Added group-adding code to set_users in ArchTemplate
1190
1191 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1192 Added post-install script code
1193
1194 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1195 Fixed encapsulation issues in GLIClientController (bug #90141)
1196
1197 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1198 Update resizing code in GLIStorageDevice
1199
1200 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1201 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1202
1203 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1204 Reverted change to ArchTemplate and added support for commented line in old
1205 code.
1206
1207 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 Changed _edit_config() to modify value in-place instead of commenting out and
1209 adding the new value to the end of the file.
1210
1211 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1212 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1213 Also updated TODO list.
1214
1215 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1216 Use blackace's one-liner to add comments for all function for use with
1217 pythondoc.
1218
1219 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1220 Moved 'end >= device_sectors' check out of loop to check for next partition's
1221 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1222 Partitioning code now tracks start/end of extended for placing logicals. End
1223 point of logical is now adjusted along with start.
1224
1225 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1227 the way of partitioning from a blank disk. Add int() around access to minor
1228 key in partition information due to new partition code leaving them as float.
1229
1230 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1231 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1232
1233 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1234 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1235
1236 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1237 Added support for DHCP options and MAC addresses in the InstallProfile.
1238
1239 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1240 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1241 sed to properly strip out junk.
1242
1243 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1244 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1245 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1246
1247 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1248 Fixed indent problem in GLICController
1249
1250 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Check for disklabel type "loop" and use the device name without a minor.
1252
1253 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1254 Remove /tmp/compile_output.log and /var/log/install.log when install is
1255 complete. Added code to (hopefully) keep 2nd thread running after install.
1256 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1257 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1258 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1259
1260 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1261 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1262 when unpacking tarball.
1263
1264 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1265 rewrote filesystem_tools. looks like it works so ripping out all the old
1266 filesystem_tools code.
1267
1268 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1269 Changed the print statements to logging in the partitioning BE code.
1270 the logger may need to be imported to the x86archtemplate. unknown yet.
1271 Added the finishing_cleanup function.
1272 added a fix to the logger from BenUrban
1273
1274 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1275 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1276 URIs. The blank uri check has been commented out.
1277 ripped out error checking of set_services. this is done by _add_to_runlevel.
1278
1279 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1281
1282 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1284 the install profile if available. Commented out spawn() debugging prints
1285
1286 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1287 small changes to setup_network_post. moved adding to runlevel of net.x to
1288 after the device gets symlinked. added domainname runlevel command.
1289
1290 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1292 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1293 spawn() call in livecd-kernel code to pass environment variables.
1294 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1295 the install profile if available.
1296
1297 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1299 to handle installing the livecd kernel into the new system.
1300
1301 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1302 should emerge hotplug and coldplug before adding them to runlevel.
1303
1304 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1305 took chroot out of grub_install command.
1306
1307 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1308 Changed chroot wrapper code in spawn() to write the wrapper the python way
1309 instead of the bash way to avoid quote conflicts. Added
1310 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1311 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1312 as it breaks the piping.
1313
1314 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1315 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1316
1317 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1319 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1320 GLIInstallProfile.
1321
1322 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1323 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1324 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1325 into /mnt/gentoo in prepare_chroot()
1326
1327 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1329 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1330 to start/end sectors
1331
1332 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1333 Add 2>&1 to cmd in spawn()
1334
1335 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 Modified GLIUtility.exitsuccess() to work with return value from
1337 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1338 creates wrapper script for commands run inside chroot so multiple commands
1339 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1340 for the generated script from spawn()
1341
1342 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1343 Removed default values for stage tarball URI and portage tree URI from
1344 InstallProfile. These should be set by the FEs. also added services step to
1345 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1346 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1347
1348 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1349 Small fix for setting the default gateway. Also added feature to dialogfe.
1350
1351 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1352 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1353
1354 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1355 Fixed a bunch of true -> True typos. lots of em
1356 only write new resolv.conf if there are dns servers listed.
1357
1358 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1359 Commented out 'display_on_tty8=True' in start_portmap()
1360
1361 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1362 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1363
1364 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1365 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1366 lang parameter to __init__()
1367
1368 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1369 updates to TODO list.
1370
1371 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1372 Initial code for quickpkg GRP support. Fix loop to grab packages from
1373 'emerge -p blah'
1374
1375 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1376 check for dhcp in the network stuff and emerge it if it is.
1377 added quickpkg to TODO list
1378
1379 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1380 Changed the raising of 'warning' exceptions to a simple log of the error
1381 so that the installer can continue.
1382
1383 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1384 Some big changes. First, changed most output to display_on_tty8.
1385 Second, added log lines to all templates. Some smaller fixes such as typos.
1386 Also did some cleanups of old commented lines.
1387
1388 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1389 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1390 Undo change with fix. Escaping fix in GLIStorageDevice.py
1391
1392 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1393 more updates to TODO list. hopefully we'll soon start removing items instead
1394 of adding them.
1395
1396 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1397 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1398
1399 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1400 updated TODO list. (again)
1401
1402 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1403 changed output of portmap start to display_on_tty8.
1404 fixed bootloader for udev and multiple kernels
1405 fixed custom kernel config (again)
1406
1407 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1408 changed default value of CC._enable_ssh to True because this is smart.
1409 added code to allow custom kernel .config. may be unstable and break. sorry.
1410
1411 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1412 partition() now waits until after it checks for partition flags before delete
1413 the partitions :P
1414
1415 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1416 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1417 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1418 blank.
1419
1420 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1421 Various fixes related to the add_users function. Still not yet finished.
1422 Added things to the TODO list. Lets start using that!
1423
1424 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1425 Added code to x86Template to format newly created partitions. Also added
1426 some error checking code. GLIStorageDevice passes 'minor' with data to
1427 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1428 mounting code.
1429
1430 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1431 Took out unnecessary setting of random livecd root password. the cd already
1432 sets it randomly.
1433
1434 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 Took out an unneeded step from CC's run()
1436
1437 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1438 Attempt at detecting and adding windows partitions to lilo.
1439
1440 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1441 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1442 partition. fixed misc exit_status => exitstatus typo.
1443
1444 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1445 Added basic code for resizing filesystems with pyparted. Fixed code for
1446 resizing ntfs and ext2/3.
1447
1448 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1449 Fixed partition() in x86Template so that it scans through logicals and deletes
1450 before deleting containing extended partition. Also clears partition table to
1451 be safe before third pass.
1452
1453 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1454 Added mount_network_shares. not able to test it from this computer.
1455 will test when i get back to school.
1456 also added start_portmap to the client_controller as an always-do.
1457 agaffney says this is needed for NFS mounts to work.
1458
1459 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1460 Partial rewrite of partitioning code in x86Template. No longer shells out to
1461 parted to perform actions, now uses all pyparted calls. Code "works" in a
1462 test, but still needs lots of TLC. Also modified tests/install.py to work
1463 with x86Template and GLIClientConfiguration.
1464
1465 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1466 Initial move of partitioning code from ArchTemplate to x86Template.
1467
1468 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1469 Added grp_install and services to InstallProfile. forgot about the set_root_password
1470
1471 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1472 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1473 Test Install ran very well (skipping partitioning).
1474
1475 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1476 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1477 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1478 some may still have eluded me.
1479
1480 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1481 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1482 Just finished mount_local_partitions in GLIArchitectureTemplate
1483
1484 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1485 Added get_num_sectors() to GLIStorageDevice.
1486
1487 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1488 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1489 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1490 from GLIInstallProfile.
1491
1492 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1493 GLIStorageDevice returns "unknown" instead of "" for get_type()
1494
1495 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1496 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1497 actually work. Commented out resizability checking code for speed.
1498
1499 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1500 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1501 GLIStorageDevice at the suggestion of plors
1502
1503 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1504 Added a function to GLIUtility to pull a value from a make.conf-style config
1505 file. Minor type fix to GLIInstallProfile.py
1506
1507 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1508 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1509 network mounts from partition data structure in GLIInstallProfile
1510
1511 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1512 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1513 can be resized.
1514
1515 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1516 Added some of the final functions to GLIInstallTemplate.
1517 Yes this project is still active despite rare use of the Changelog!
1518
1519 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1520 Added the GLIPartitionTools.py file. This is a temporary insertion of
1521 partitioning tools that will eventually go into their own package.
1522
1523 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1524 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1525 for the program). Added __init__(install_profile, client_configuration) to
1526 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1527 to avoid constantly passing stuff every time we call a method.
1528
1529 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1530
1531 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1532 files without messing up all the other stuff in them. This will be used for making
1533 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1534
1535 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1536
1537 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1538 have a few basic things. I added two private methods. One is _depends(). This
1539 will be used for dependency checking (ie. unpacking a tarball requires that
1540 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1541 same syntax as os.system(), however, instead of being run in the liveCD
1542 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1543 isolated the code. Hope to work more this week to get this class formed...
1544
1545 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1546
1547 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1548 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1549 to allow for easier modification (mutable, rather than immutable objects). Updated
1550 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1551 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1552 Added initial unit test code.
1553
1554 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1555
1556 Added initial changelog. Setting up the basic structure of the CVS repository
1557 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1558 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20