/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1221 - (show annotations) (download)
Fri Jan 6 16:39:49 2006 UTC (8 years, 9 months ago) by agaffney
File size: 65168 byte(s)
  src/GLIUtility.py:
  move parse_vdb_contents() to GLIPortage
  src/GLIPortage.py:
  remove all symlink fixups

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.565 2006/01/06 16:39:49 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIUtility.py:
10 move parse_vdb_contents() to GLIPortage
11 src/GLIPortage.py:
12 remove all symlink fixups
13
14 5 Jan 2006; Preston Cody <codeman@gentoo.org>
15 AT: bootsplash is now gensplash
16 gliserv: add advanced_mode to shared_info
17 webgli: Added advanced mode. mostly just disables a few screens.
18
19 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/GLIPortage.py:
21 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
22 added emerge()
23 update sub-progress after each package is emerged
24 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
25 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
26 remove link if it exists before moving content into place
27 src/GLIArchitectureTemplate.py:
28 install_packages() now calls emerge() in GLIPortage
29 change all calls to self._emerge() to self._portage.emerge()
30 comment out all emerge status checking...using exceptions now
31 call copy_pkg_to_chroot() directly for livecd-kernel
32
33 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIArchitectureTemplate.py:
35 remove add_pkg_to_world() and copy_pkg_to_chroot()
36 copy installer.log to installer.log.failed on install failure
37 src/GLIUtility.py:
38 added get_keymaps()
39 spawn() takes any False argument for chroot instead of just None
40 src/GLIPortage.py:
41 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
42 change copy_pkg_to_chroot() to work properly with use_root=False
43 figure PORTAGE_TMPDIR properly
44
45 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
46 src/net/server/html/*:
47 converted showclients, load/saveprofile
48
49 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
50 src/GLIPortage.py:
51 exclude packages already in chroot vdb from binary deplist
52 chroot to use best_version for chroot's vdb
53 src/runtimedeps.py:
54 accept ROOT via commandline instead of env
55
56 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
57 src/runtimedeps.py:
58 remove passing of ROOT
59 src/GLIPortage.py:
60 modify get_deps() to get deptree for each package and merge into final list
61 remove depgraph class
62 add debugging code to get_deps()
63 src/GLIArchitectureTemplate.py:
64 combine code for GRP/compile in install_packages() into one block
65 debugging code in install_packages()
66
67 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
68 src/runtimedeps.py:
69 initial commit
70 src/GLIPortage.py:
71 use separate script for GRP deps
72 remove calls to portage module
73
74 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
75 src/GLIPortage.py:
76 initial commit
77 move some of portage function from GLIAT
78 flipped around a few function args
79 src/GLIArchitectureTemplate.py:
80 revamp install_packages() for new GLIPortage
81
82 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
83 src/GLIArchitectureTemplate.py:
84 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
85
86 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
87 src/net/server/gliserv.py:
88 wrap generated code in a class to isolate it a bit better
89 302 redirects work
90 don't use cgi.escape() for <% %>
91 src/net/server/html/webgli/*:
92 load/save profile
93 src/GLIUtility.py:
94 change /sbin/lspci to just lspci
95
96 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
97 src/GLIClientController.py:
98 change ordering of statements in CC run() while loop to not go past the end
99 of the array
100 src/GLIArchitectureTemplate.py:
101 removed redundant bind mounts
102
103 18 Dec 2005; Preston Cody <codeman@gentoo.org>
104 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
105 added a diagram by blackace from last night.
106 added the glossary in RTF format.
107
108 17 Dec 2005; Preston Cody <codeman@gentoo.org>
109 x86AT: separated out emerge/configure from running of bootloader
110 added MBR drive support to lilo.
111 these changes will likely not work.
112 AT: added setup_and_run_bootloader step.
113
114 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
115 src/net/server/gliserv.py:
116 call generated code in a function
117 src/net/server/html/webgli/*:
118 include top/bottom
119 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
120 src/GLIClientCongifuration.py:
121 install mode magic
122
123 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
124 src/GLIClientController.py:
125 use GLIException when there's an import problem
126 added debug code to show install_steps
127 src/templates/amd64ArchitectureTemplate.py:
128 add . to import path
129 proper path this time: ../../templates
130 src/GLIArchitectureTemplate.py:
131 add _portage_best_version() function
132
133 11 Dec 2005; Preston Cody <codeman@gentoo.org>
134 added initial glossary and gimli diagram to the docs directory.
135 modify gli-dialog to allow editing of the install_profile after loading XML.
136
137 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
138 src/net/server/html/webgli/:
139 converted globaluse, localuse, networkmounts, portagetree, and stageselection
140 moved saveclientconfig stuff into clientconfig
141 moved saveconfigfiles into config files
142 converted etc_portage and makedotconf
143 converted bootloader and kernel
144 convert daemons, extrapackages, networking, review, services, timezone, users
145 src/net/server/gliserv.py:
146 proper 404 handling for .pyhtml extension
147 HTML escape <% %> stuff
148 work around python's sucky regexes
149 src/GLIInstallProfile.py:
150 allow set_{rsync,ftp,http}_proxy() to accept empty values
151
152 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
153 src/net/server/gliserv.py:
154 initial commit of Legolas templating engine
155 302 redirects
156 src/net/server/html/index.html, src/net/server/webgli_template.html:
157 minor changes for new code
158 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
159 initial commit of the conversion from the monolithic WebGLIHandler.py to the
160 one file per path Legolas goodness
161 partitioning[2-4] done
162
163 5 Dec 2005; Preston Cody <codeman@gentoo.org>
164 webgli: dhcp options in CC and post-install.
165 updated comparison chart.
166 webgli: etc/portage/* and distcc support added. not too-well tested.
167
168 4 Dec 2005; Preston Cody <codeman@gentoo.org>
169 webgli_template.html: valign=top on left side.
170 webgli: fix bootloader boot_device. now working.
171 webgli: CC proxy done. post-install proxy in progress.
172
173 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
174 src/net/server/webgli_template.html:
175 increase padding for content cell to 7px and add colspan=2
176
177 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
178 webgli: added graphic bar on top
179 webgli: added hover effects on the links on the left
180 webgli: re-rendered header_bg.png to stretch without artifacts
181
182 3 Dec 2005; Preston Cody <codeman@gentoo.org>
183 webgli: make.conf disabling fixes for dynamic_stage3
184 fixed portage snapshot browse popup
185 all changes tested.
186 webgli: add debug mode to CC screen. the screen still needs lots of work.
187
188 1 Dec 2005; Preston Cody <codeman@gentoo.org>
189 added debug mode question to gli-dialog
190 added CC proxies to CC networking for gli-dialog
191 webgli: fixed skip CC networking if connection active
192 webgli: portage snapshot defaults to CD
193 webgli: bootloader mbr drive selection
194 webgli: USE flags unselectable if dynamic_stage3
195 webgli: manual extra packages and save button.
196
197 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIUtility.py:
199 change ping count to 2
200 docs/comparison.html
201 initial commit
202
203 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
204 src/templates/x86ArchitectureTemplate.py:
205 fix map() issue with grub code
206 replace kernel_names and initrd_names loops with one-liners
207
208 27 Nov 2005; Preston Cody <codeman@gentoo.org>
209 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
210 initial gli-dialog support for recommended partitioning layout and clear.
211 failure cleanup now an option for gli-dialog.
212 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
213 added comparison list and updated TODO!
214
215 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
216 src/GLIArchitectureTemplate.py:
217 fix to stage1() debug code
218 fix to stage2() debug code
219
220 26 Nov 2005; Preston Cody <codeman@gentoo.org>
221 some more bootloader code fixes. forgot boot_device != mbr_device.
222
223 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
224 src/GLIStorageDevice.py:
225 fix to unallocated space merging when last one is after part 4
226
227 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
228 src/GLIArchitectureTemplate.py:
229 small fix to debugging code in copy_pkg_to_chroot()
230
231 23 Nov 2005; Preston Cody <codeman@gentoo.org>
232 more bugfixes with bootloader code
233 gli-dialog side appears to work
234
235 21 Nov 2005; Preston Cody <codeman@gentoo.org>
236 initial adding of boot_device to backend.
237 initial boot_device support added to gli-dialog.
238 some fixes of my poor coding
239
240 20 Nov 2005; Preston Cody <codeman@gentoo.org>
241 converted gli-dialog to use the install_package_list.
242 gtkfe has already been converted by AllanonJL
243 new way working in gli-dialog now and added to webgli.
244 added set/get_boot_device() to IP
245
246 19 Nov 2005; Preston Cody <codeman@gentoo.org>
247 get_install_package_list added to InstallProfile. This can be used by the FEs
248
249 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
250 src/templates/x86ArchitectureTemplate.py:
251 call ls with '-1 --color=no'
252
253 16 Nov 2005; Preston Cody <codeman@gentoo.org>
254 added warning (#9) to GRP ppl about stage3 tarballs
255
256 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
257 src/GLIArchitectureTemplate.py:
258 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
259 confused
260
261 13 Nov 2005; Preston Cody <codeman@gentoo.org>
262 removed protocols from rc.conf screens
263 finished initial rc.conf and make.conf in webgli
264
265 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
266 src/net/server/gliserv.py:
267 add -h option to usage()
268 show time and request URI in debug mode
269 show client IP in debug mode
270 just use IP instead of trying to do a reverse lookup
271
272 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
273 src/net/server/gliserv.py:
274 'classier' 401 message
275 proper commandline parsing
276 help via -h
277 user/pass can be specificed via commandline option
278
279 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
280 src/net/server/gliserv.py:
281 basic HTTP auth
282
283 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
284 src/net/server/gliserv.py:
285 dynamic module reloading (yipee!)
286 send 'Last-Modified' header for real files
287 respond to HEAD with just headers
288 src/net/server/handlers/WebGLIHandler.py:
289 icons for drives
290
291 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/server/handlers/WebGLIHandler.py:
293 initial 'pretty' partition table display support
294 clicking partition in 'pretty' display works instead of radio buttons
295 radio buttons and pretty display work together
296 META redirect instead of javascript
297 pretty display stretches across entire screen
298 'Recommended layout' and 'Clear drive' functions
299 properly catch exceptions from do_recommended()
300 src/GLIArchitectureTemplate.py:
301 replace preinst, copy, postinst, rm steps with qmerge
302 whoops...that shouldn't have been commented out
303 create image_dir with -p in copy_pkg_to_chroot()
304 more generic of symlink crappiness
305 new copy_pkg_to_chroot() actually works now
306
307 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
308 src/GLIStorageDevice.py:
309 initial generic disk support
310 fixes for add_partition() code
311 src/net/server/handlers/WebGLIHandler.py:
312 added support for creating generic disks
313 add new partition working
314 save and delete partitions
315
316 6 Nov 2005; Preston Cody <codeman@gentoo.org>
317 webgli: Partitioning making progress.
318
319 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
320 src/GLIArchitectureTemplate.py:
321 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
322 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
323 dir) and works around /etc/gconf symlink problem
324
325 5 Nov 2005; Preston Cody <codeman@gentoo.org>
326 webgli: lots of updates. preliminary partitioning. extra packages works.
327
328 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
329 src/net/server/gliserv.py:
330 httpd now supports HTTPS and falls back to HTTP if not available
331 make fallback actually work
332 src/net/server/SecureXMLRPCServer.py:
333 SecureSocketServer is now threaded
334
335 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
336 src/net/client/gliclient.py:
337 try to use HTTPS for XMLRPC first and fallback to HTTP
338 pretend mode
339 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
340 HTTPS XMLRPC goodness from samyron
341 pass name of certificate
342
343 31 Oct 2005; Preston Cody <codeman@gentoo.org>
344 wegli: daemons and services screens done.
345
346 30 Oct 2005; Preston Cody <codeman@gentoo.org>
347 webgli: networking and users screens
348 added return_redirect to handler.py
349 loading and saving install/client profiles works for webgli now
350 Review also done
351
352 *GLI-0.2 (27 Oct 2005)
353
354 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
355 src/templates/x86ArchitectureTemplate.py:
356 properly check for bootloader emerge exist status with exitsuccess()
357 log output of grub install command
358 add --batch --no-floppy to grub command
359 grubinstallstring only gets logged if debug is on
360 src/GLIUtility.py:
361 update progress bar to 100% when process finishes
362
363 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
364 src/GLIClientController.py:
365 added debugging code for the interaction between the 2 threads via Event()
366 src/GLIUtility.py:
367 doubled the buffer size in spawn()
368 bump buffer size up to 16384
369 only report progress in 5% increments
370 src/GLIArchitectureTemplate.py:
371 kernelpkgs.txt support code
372 above disabled because it sucks
373 added add_pkg_to_world()
374
375 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/GLIArchitectureTemplate.py:
377 use tar | tar to copy files in copy_pkg_to_chroot()
378 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
379
380 23 Oct 2005; Preston Cody <codeman@gentoo.org>
381 DEBUGGING ADDED TO AT. verbose field added to CConfig.
382
383 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
384 src/net/server/gliserv.py:
385 / maps to index.html
386 look for actual files in html/
387 src/net/html:
388 new template
389 src/GLIUtility.py:
390 added parse_vdb_contents()
391 src/GLIArchitectureTemplate.py:
392 added copy_pkg_to_chroot()
393 added debug code to dynamic-stage3
394 switch dynamic-stage3 to new method
395 lots of bug fixes from adding debug code
396
397 22 Oct 2005; Preston Cody <codeman@gentoo.org>
398 webgli initial bootloader support + changed make.conf.
399 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
400
401 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
402 src/GLIUtility.py:
403 horrible tangled mess of code that is tarball unpacking subprogress display
404 add unpack progress to portage snapshot
405 use read() instead of readlines() in spawn()
406 only update progress bar for whole percents
407
408 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
409 src/templates/x86ArchitectureTemplate.py:
410 change call to 'grub' to use GLIUtility.exitsuccess()
411 add definition of 'build_mode' in _configure_lilo()
412 src/misc/updategtkfe, src/misc/updateglid:
413 fix so subshell is called in root shell
414
415 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
416 src/net/server/handlers/WebGLIHandler.py:
417 stage screen launches URI browser in sized window with various properties set
418
419 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
420 src/misc/updategtkfe:
421 updated to actually work
422 remove previous snapshot and extracted dir before downloading
423 src/misc/updateglid:
424 updated to actually work
425 src/templates/x86ArchitectureTemplate.py:
426 fixed bug where grub code was looking for 'root+root+file_name2'
427
428 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
429 src/net/server/handlers/WebGLIHandler.py:
430 URI browser
431 added mirror selection
432 src/GLIUtility.py:
433 ls via ssh strips off ending *
434
435 16 Oct 2005; Preston Cody <codeman@gentoo.org>
436 more updates to webgli. stage selection.
437
438 11 Oct 2005; Preston Cody <codeman@gentoo.org>
439 updated webgli with preliminary Network Mounts support.
440
441 9 Oct 2005; Preston Cody <codeman@gentoo.org>
442 GenDialog: string formatting and yes/no label fixes.
443 added WebGLI template for gliserv.py
444 added WebGLIHandler as well as a definition for it in gliserv.py
445 updates to the webgli files even though they won't be there for long.
446 Utility: remove exception for non-existant grppkgs.txt until the new livecd
447 goes public.
448
449 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
450 src/net/server/gliserv.py:
451 override dict to not be so anal
452 main server now loads separate module to handle requests
453 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
454 split out profile URLs into separate handler function
455 move handlers into subdirectory
456 add Welcome and Clients handlers
457
458 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
459 src/GLIUtility.py:
460 raise exception if password prompt received twice
461
462 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
463 src/GLIUtility.py:
464 removed rot13ify()
465
466 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
467 src/net/server/gliserv.py:
468 allow for param to be passed multiple times in GET
469 no XMLRPC functions return None
470 modify POST request parsing to only create a list if needed
471 fix GET request parsing so the list creation for multiple values works
472 src/net/client/gliclient.py:
473 various typo and type mismatch fixes
474 exit after exception
475
476 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
477 src/net/client/gliclient.py:
478 initial commit
479 pass MAC to XMLRPC functions
480 src/net/server/GLIServerProfile.py:
481 rename GLIClientsProfiles to GLIServerProfile
482
483 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
484 src/net/server/gliserv.py:
485 now handles POST requests
486 move majority of request handling code to common_handler() to reduce code
487 duplication
488 profile loading
489 client reg via XMLRPC goes into SharedInfo()
490 /showclients redesign
491 template fixes
492 allow handler functions to add/change headers
493 save profile
494
495 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
496 src/net/server/GLIClientsProfiles.py:
497 initial commit
498 src/net/server/template.html:
499 initial commit
500 src/net/server/gliserv.py:
501 add template mojo
502
503 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
504 src/net/server/gliserv.py:
505 XMLRPC mojo
506
507 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
508 src/GLIArchitectureTemplate.py:
509 add code in _edit_config() to comment line where variable is defined
510 previously
511 insert new line under previous definition of variable if it exists
512 small _edit_config() cleanup
513 src/GLIStorageDevice.py:
514 add clear_partitions() function
515 new sizes for recommended partition layout
516 automatically calculate swap size for recommended layout
517
518 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
519 src/templates/x86ArchitectureTemplate.py:
520 fat16 mojo
521
522 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
523 src/GLIStorageDevice.py:
524 prevent do_recommended() from being run twice
525 rewrite do_recommended() to be more robust
526 src/GLIArchitectureTemplate.py:
527 rework _edit_config() to not write duplicate entries
528
529 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
530 src/GLIStorageDevice.py:
531 added do_recommended() function to automatically created 256M/1G/* layout
532
533 17 Sep 2005; Preston Cody <codeman@gentoo.org>
534 src/gli-dialog.py: added set_distcc to the list
535 GenDialog: added set_distcc. untested.
536 IP: added install_distcc flag.
537 AT: added install_distcc function based on the flag. runs after build_kernel
538 changed AT spawn command for distcc for nodeps.
539
540 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
541 src/GLIUtility.py:
542 add rot13ify() function
543
544 16 Sep 2005; Preston Cody <codeman@gentoo.org>
545 src/GenDialog.py
546 added a sentence of text. unchecking support added.
547
548 15 Sep 2005; Preston Cody <codeman@gentoo.org>
549 src/GLIUtility.py
550 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
551 src/GenDialog.py
552 still working on extra_packages. transformed the list to new format.
553 added GRP indication to list. untested.
554 TODO lists updated.
555 src/fe/dialog/gli-dialog.py
556 spelling mistook.
557
558 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
559 src/GLIUtility.py:
560 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
561
562 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
563 src/GLIUtility.py:
564 add get_directory_listing_from_uri()
565 add http support to above
566 add ftp support to above
567 add scp support to above
568 src/GLIArchitectureTemplate.py:
569 "0" instead of 0 for key of single-element dict passed to _edit_config()
570
571 5 Sep 2005; Preston Cody <codeman@gentoo.org>
572 value_only -> only_value
573
574 3 Sep 2005; Preston Cody <codeman@gentoo.org>
575 gutted out all of etc_portage structure since it is now all handled by
576 etc_files
577
578 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/GLIArchitectureTemplate.py:
580 install_packages() sends progress update notifications
581 src/templates/x86ArchitectureTemplate.py:
582 increase sleep to 5s between format tries
583 src/GLIClientController.py:
584 pass 'self' to AT instead of 'self._pretend'
585
586 2 Sep 2005; Preston Cody <codeman@gentoo.org>
587 logger -> logger.log in x86AT
588
589 1 Sep 2005; Preston Cody <codeman@gentoo.org>
590 added set_etc_portage to IP. debugging gli-d's support for it.
591
592 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
593 src/templates/x86ArchitectureTemplate.py:
594 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
595
596 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
597 src/GLIArchitectureTemplate.py:
598 add _portage_best_version() function and rework install_packages() to allow
599 for future X of Y tracking
600 Use best_visible instead of best_version
601 tracked down and fixed missing = causing empty install extra packages
602 use = when emerging also
603 quickpkg hokey pokey
604 run _get_packages_to_emerge() again with -pk
605
606 22 Aug 2005; Preston Cody <codeman@gentoo.org>
607 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
608 the end of install_packages.
609 added updateglid to /src/misc
610 updated all core files with new GPL notice and copyright statement.
611
612 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/GLIUtility.py:
614 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
615 a snapshot in /mnt/cdrom/snapshots/
616 get_snapshot_from_cd() adds file:// at the beginning
617 change calls to extra package special case functions to 'self.blah'
618
619 21 Aug 2005; Preston Cody <codeman@gentoo.org>
620 src/ArchTemplate: changed "voodoo".
621 changed order of portage sync methods. made a fallback to webrsync if
622 normal emerge sync fails.
623 removed get_sources_from_cd because it is obsolete.
624 add special cases to install_packages. remove fatal exception on package
625 install failure b/c the box will still be bootable.
626 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
627 handled in the FEs.
628 src/GenDialog: added a bunch of code for dealing with x11-based packages.
629 awaiting testing.
630
631 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
632 src/GLIStorageDevice.py:
633 global try/except block around fs resizable detection code
634 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
635 install-failed cleanup function
636
637 18 Aug 2005; Preston Cody <codeman@gentoo.org>
638 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
639
640 16 Aug 2005; Preston Cody <codeman@gentoo.org>
641 GLIGenDialog:
642 add drive choices for loaded configs.
643 force snapshot for dynamic_stage3
644 init the snapshoturi input to the cd snapshot if not already selected.
645 if dynamic_stage3, skip the make.conf step.
646 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
647 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
648
649 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
650 src/GLIArchitectureTemplate.py:
651 manually call MAKEDEV in stage3-dynamic code
652 copy /etc/inittab.old to /etc/inittab in chroot
653 src/GLIUtility.py:
654 add beginning of validate_uri() function
655 add file:/// support to validate_uri()
656 single quotes when setting livecd password
657
658 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
659 src/GLIGenDialog.py:
660 change getmountpoint() to get_mountpoint()
661 src/misc/updategtkfe:
662 committed script to automatically download latest snapshot and run gtkfe
663 src/templates/x86ArchitectureTemplate.py:
664 fix _configure_lilo_add_windows() for IP -> GLISD stuff
665 src/GLIArchitectureTemplate.py:
666 give tmp_minor an initial value in mount_local_partitions so that the value
667 remain from the previous drive
668
669 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
670 src/templates/x86ArchitectureTemplate.py:
671 Fix _configure_lilo() for IP using GLISD stuff
672 src/GLIArchitectureTemplate.py:
673 install_cron_daemon() treats "none" specially
674
675 14 Aug 2005; Preston Cody <codeman@gentoo.org>
676 old patch from Steven Mertens to resolve bug #96642
677 numerous asthetic changes to GenDialog, no real functionality changes though.
678 strings renamed for global use if necessary.
679 fix all three parts of bug 102291
680 disable set_etc_portage until fully-written.
681
682 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
683 src/GLIClientController.py:
684 lower-case http/ftp proxy envvars
685
686 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
687 src/GLIClientController.py:
688 log end of pre_install steps to aid in debugging
689 src/templates/x86ArchitectureTemplate.py:
690 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
691
692 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
693 src/GLIArchitectureTemplate.py
694 check to make sure that the device node we're wait for to exist isn't of
695 type 'free'
696
697 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
698 src/GLIGenDialog.py:
699 convert install_packages to list in set_extra_packages()
700 check return code of checklist() call in "Manual" section
701 *actually* fix the first problem
702
703 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
704 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
705 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
706
707 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
708 src/GLIArchitectureTemplate.py:
709 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
710
711 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
712 Add CDATA support to SimpleXMLParser and add utility functions for it.
713
714 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
715 src/GLIArchitectureTemplate.py:
716 Fix case where vixie-cron is specified as a full package atom, as we still
717 don't want to run 'crontab /etc/crontab' for it.
718
719 *GLI-0.1 (3 Aug 2005)
720
721 30 Jul 2005; Preston Cody <codeman@gentoo.org>
722 add scp to list of is_uri() so GenDialog doesn't complain.
723 fixed livecd-kernel bug in bootloader code.
724 fixed gendialog for dynamic_stage3 instead of "networkless"
725 change bootloader to allow for both initrd and initramfs.
726 fix IP for dynamic_stage3.
727 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
728
729 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
730 Added full scp:// URI support to get_uri() in GLIUtility
731 Remove "networkless" from dynamic stage3 if locic.
732 Remove print statement from scp:// code.
733 Change scp code to check for "assword: " instead of "Password:"
734 Fix post-install network code to create net.eth1+ symlink correctly
735 Check to make sure pkg can be split on / and some debugging code
736 Add 2>dev/null to emerge call in _get_packages_to_emerge()
737 SimpleXMLParser handles True/False/None correctly now
738 Comment out above fix
739 Add partitioning wait-for-device-to-exist code to mount_local_partitions
740
741 28 Jul 2005; Scott Myron <samyron@gentoo.org>
742 Removed a FIXME in the GLIClientConfiguration that is no
743 longer needed.
744
745 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
746 Default to x86 in ClientConfig
747 Typo in build-a-stage3 code.
748 Remove MAKEDEV call in build-a-stage3 postscript.
749
750 26 Jul 2005; Preston Cody <codeman@gentoo.org>
751 Rewrote init of IP for gli-d. Other GenDialog updates.
752 allow network_type to be None in CConfig.
753
754 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
755 Add _dynamic_stage3 option to IP.
756 Add check for that option to dynamic stage3 code in ArchTemplate.
757 Fix code to determine default route in get_eth_info() in GLIUtility.
758 Fix serialization of dns-servers in ClientConfig.
759
760 24 Jul 2005; Preston Cody <codeman@gentoo.org>
761 changed default values of cron/logger in IP.
762 moved GenDialog IP init out to the individual files. gli-dialog's version
763 will change quite a bit.
764
765 22 Jul 2005; Preston Cody <codeman@gentoo.org>
766 added ppcArchTemplate. blank now. working on yaboot.
767 modified ArchTemplate for amd64 and ppc custom kernels.
768 skeleton implementation of _configure_yaboot.
769 small fixes to other templates.
770
771 21 Jul 2005; Preston Cody <codeman@gentoo.org>
772 GenDialog updates. changed comment in IP.
773
774 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
775 src/GLIInstallProfile.py:
776 Fix codeman's screwup of changing the service seperator to ',' in the parser
777 without changing it in the serialization code! Also document this in a
778 comment so you find it easier. Everybody needs to make sure they update
779 their install profiles!
780
781 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
782 src/GLIArchitectureTemplate.py:
783 Fix casting of list to string and concat of None with string, as well as
784 commented prototype of checking that mounting actually worked (found a case
785 where mount can return success, but the mount won't be done).
786
787 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
788 src/templates/x86ArchitectureTemplate.py:
789 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
790 checking for the device, and sleeping 1 second each time.
791
792 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
793 src/templates/x86ArchitectureTemplate.py:
794 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
795 bootloader works again. Also rename _install_{grub,lilo} to
796 _configure_{grub,lilo} since they don't install the loaders anymore
797 themselves.
798
799 7 Jul 2005; Preston Cody <codeman@gentoo.org>
800 fix global USE flags to not include the arch types at the end.
801 updates to GenDialog and gli-d.
802
803 6 Jul 2005; Preston Cody <codeman@gentoo.org>
804 fixing bootloader code for no initrd and initrd->initramfs naming change.
805
806 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
807 Proper comments and parameters to GLIException in install_mta()
808 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
809 Add strip() to list_mirrors(), list_subarch_from_mirror() and
810 list_tarball_from_mirror() to eliminate blank last item.
811
812 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
813 Added stage3 generation code.
814
815 5 Jul 2005; Preston Cody <codeman@gentoo.org>
816 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
817 Mild changes to GenDialog.
818
819 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
820 Remove separate install step configure_rc_conf() since it's handled by
821 update_config_files()
822 Make a copy of newvalues in _edit_config() so quotes aren't added when the
823 function is called twice on the same file.
824
825 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
826 Missing \ in sed in _get_packages_to_emerge()
827 Removed explicit emerging of hotplug and no longer add it to the runlevel.
828 Check in _quickpkg_deps() to ignore blank package names returned from
829 _get_packages_to_emerge()
830
831 28 Jun 2005; Preston Cody <codeman@gentoo.org>
832 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
833 in the dialog.py gauge code.
834
835 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Add code to update_config_files() to go through etc_files and update stuff.
837 Check to see that _etc_files['make.conf'] exists in get_make_conf()
838 Only use float() in partition xml parsing code if type == "free"
839
840 28 Jun 2005; Preston Cody <codeman@gentoo.org>
841 finished almost all internationalization of GenDialog.
842 attempt at fixing rc.conf function. moved 3 generate functions out of
843 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
844 added dialog.py to the fe/dialog directory so it actually gets used.
845
846 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
847 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
848
849 27 Jun 2005; Preston Cody <codeman@gentoo.org>
850 fix extra entry in list_mirrors()
851 beginning internationalization runthrough.
852
853 26 Jun 2005; Preston Cody <codeman@gentoo.org>
854 added dialog.py to /src temporarily until it gets accepted upstream.
855 fix for unused value in form in dialog.py and changed heights.
856 fix GenDialog forms.
857
858 25 Jun 2005; Preston Cody <codeman@gentoo.org>
859 Changed hostname/domainname for new baselayout.
860 Changed _add_to_runlevel errors to logs.
861 Updated TODO list to show status of GenDialog
862 More updates to GenDialog including two checklists that probably won't work.
863 update IP to use comma-separated list instead of space separated for services.
864
865 24 Jun 2005; Preston Cody <codeman@gentoo.org>
866 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
867 GenDialog as it gets closer to completion.
868
869 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
870 Modify get_eth_info() to take a full interface name (eth0 fex). float()
871 instead of int() in add_partition_device_partition() for minor (closes 96804)
872
873 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
874 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
875 instead of 'interfaces[interface][1]' since DHCP uses that field for its
876 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
877
878 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
879 Apply spawn() patch from #96644 (with minor changes). Make sure the return
880 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
881 small error with <pipe>.close() returning None. Fix space vs. tab issue.
882 Fix undefined variable 'output' issue in spawn().
883
884 20 Jun 2005; Preston Cody <codeman@gentoo.org>
885 More updates to GenDialog and gli-d.
886
887 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
888 Modify list_mirrors() to return a list of mirror URL/name pairs.
889
890 19 Jun 2005; Preston Cody <codeman@gentoo.org>
891 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
892 get subarch.
893
894 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
895 Backend partitioning will create disklabel is none exists. Installprofile
896 defaults to "" now instead of "msdos" for disklabel type. Fix for
897 mount_local_partitions() to remember device along with minor in the
898 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
899 add else block to log unsupported netmount types to mount_network_shares()
900
901 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
902 src/GLIArchitectureTemplate.py:
903 Refactor kernel_compile common stuff, fix 2.4 build process.
904 src/fe/cli/clife.py:
905 Logging system.
906 src/GLIUtility.py, src/GLIStorageDevice.py:
907 Add comments about re-writes needed for boxes without sysfs.
908
909 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
910 src/GLIArchitectureTemplate.py:
911 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
912 'make dep' call for custom compile. build_mode support for prepare-only and
913 none types completed. custom compile function chains shell functions in
914 spawned script, to allow for catching all errors.
915
916 15 Jun 2005; Preston Cody <codeman@gentoo.org>
917 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
918 and GenDialog. other gendialog updates as well. kernel updates untested.
919
920 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
921 src/GLIInstallProfile.py:
922 Change structure of etc-portage stuff. The serialization was broken before my
923 last commit, and I am the only person that's ever used it. The new schema is
924 as follows:
925 <etc-portage>
926 <file name="package.mask"/>
927 <file name="package.unmask">
928 <entry atom="sys-kernel/openmosix-sources"/>
929 </file>
930 <file name="package.use">
931 <entry atom="sys-libs/db">
932 -java
933 </entry>
934 <entry atom="dev-libs/cyrus-sasl">
935 -ldap
936 </entry>
937 </file>
938 </etc-portage>
939
940
941 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
942 src/GLIInstallProfile.py:
943 Add new entry for gli-profile/kernel-build-method item. Add missing
944 serialize_etc_portage (temporary). Make serialize_make_conf always print the
945 keys in the same order.
946
947 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
948 src/GLIArchitectureTemplate.py:
949 Clean up commenting used by _edit_config(), and fix bug where wrong comment
950 was repeatedly appended to make.conf.
951
952 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
953 src/GLIArchitectureTemplate.py:
954 Put some Linux-2.6 specific code under a if statement. Store list of
955 successfully mounted swap device for using swapoff. Add proper error checking
956 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
957 'file'. Clean up some redundant code (thanks to pychecker).'
958
959 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
960 Fix typos: get_extended() instead of get_extended_partition(). Added
961 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
962 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
963
964 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
965 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
966 in add_network_interface.
967
968 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
969 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
970 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
971 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
972 prepare_chroot.
973
974 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
975 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
976 +src/fe/installer-gtk:
977 Add new automated CLI frontend. Add scripts that are the intended means to
978 use each frontend.
979
980 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
981 src/GLIClientController.py:
982 Add null type to network config, for cases where the interface is already up
983 and should not be touched (netboot for example).
984
985 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
986 src/GLIArchitectureTemplate.py:
987 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
988 string!. Try to use binary packages if available by default.
989
990 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
991 src/GLIArchitectureTemplate.py:
992 More error checking for _add_to_runlevel, to ensure that the init script
993 actually exists before we try to add it. set_services phase must take place
994 after the package installation, otherwise the init scripts might not exist.
995 Find the correct init script for the cron and logging daemons, and add that
996 instead of the package atom.
997
998 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
999 src/GLIArchitectureTemplate.py:
1000 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1001 usage of 'file' to 'contents' for the variable name, as it shadows
1002 __builtin__.file.
1003
1004 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1005 src/GLIArchitectureTemplate.py:
1006 Add MTA install code, and include MTA install phase. Ensure
1007 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1008 for 'none' kernel config for build_kernel phase. Put kernel_script in
1009 /var/tmp instead of /root for build_kernel phase.
1010
1011 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1012 Rename mta variables to match syslog/cron variables.
1013
1014 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1015 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1016 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1017 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1018 src/templates/.cvsignore, src/tests/.cvsignore:
1019 Refactor partition formatting again to include error checking. Allow 'none'
1020 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1021
1022 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1023 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1024 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1025 only have a single spawn call.
1026
1027 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1028 refixed samyron's fix of set_architecture_template.
1029
1030 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1031 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1032 be executable.
1033
1034 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1035 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1036 error checking when you call set_architecture_template.
1037
1038 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1039 moved the mkfsopts input to the partition options menu instead of the during
1040 the creation process. updated GenDialog to say it supports reiserfs v3.
1041
1042 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1043 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1044 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1045 Add support for other partition types to dialogfe.
1046 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1047 avoid integer overflows and wraparounds.
1048
1049 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1050 Removed start/end from XML output and added mkfsopts to partitioning info.
1051 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1052 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1053 in GLIClientConfiguration. Change from .1 and .9 to constants for
1054 partitioning. Fix free space overwriting bug. Remove a few unused functions
1055 from rewrite. Fix call to get_partition_at()
1056
1057 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1058 Updates to GenDialog and dialogfe.
1059
1060 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1061 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1062
1063 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1064 more GenDialog updates to partitioning.
1065
1066 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1067 Indenting issue in GLISD/get_ordered_partition_list.
1068 updates to GenDialog partitioning and added default UTC for timezone in IP.
1069
1070 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Added GLISD.get_model()
1072
1073 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1074 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1075 More updates to GenDialog :)
1076
1077 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1078 Added get_interface_realname() function.
1079
1080 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1081 Added auto-save of CConfig and copying to new /root after install.
1082 yet even more GenDialog updates.
1083
1084 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1085 removed print statement from GLISD. more updates to GenDialog.
1086
1087 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1088 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1089 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1090 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1091 places in GLIClientConfiguration.
1092
1093 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1094 Fix mount_local_partitions(), configure_fstab(), and
1095 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1096 A few more fixes for templates/x86Archtemplate
1097
1098 27 May 2005; Preston Cody <codeman@gentoo.org>
1099 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1100 a work in progress.
1101
1102 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1103 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1104 directly. GLISD can now handle data imported from XML.
1105
1106 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1107 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1108 handle blank (no disklabel) disks.
1109
1110 20 May 2005; Preston Cody <codeman@gentoo.org>
1111 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1112 up, documented, and separated out serialization and grouped all sections.
1113
1114 19 May 2005; Preston Cody <codeman@gentoo.org>
1115 Reorganization of ClientConfiguration and gutting of unused functions.
1116 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1117
1118 18 May 2005; Preston Cody <codeman@gentoo.org>
1119 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1120
1121 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1122 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1123 partitioning. CC serializes install profile to disk and prepare_chroot()
1124 copies it into /mnt/gentoo/root
1125
1126 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1127 Moved URI parsing into new function parse_uri()
1128
1129 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1130 Added XMLParser module.
1131
1132 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1133 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1134 Minor fix to is_uri() regex to allow hyphens in hostname.
1135
1136 12 May 2005; Preston Cody <codeman@gentoo.org>
1137 Updated finishing_cleanup for new unmounting method from agaffney.
1138
1139 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1140 Fix GLILogger to use correct time format string. Fix _edit_config() to
1141 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1142 unicode support to is_realstring().
1143
1144 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1146 return value instead of non-zero. Add code to output a traceback to the
1147 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1148 instead of --nocolor.
1149
1150 10 May 2005; Preston Cody <codeman@gentoo.org>
1151 Added GLIGenDialog.py to make a generic class for the dialog functions that
1152 can be used by both dialogfe and the netfe/be. updated both for new filename.
1153 date changes. 2004->2005.
1154
1155 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1156 Removed 'quiet=True' from spawn() calls
1157
1158 10 May 2005; Preston Cody <codeman@gentoo.org>
1159 Updated GLIUtility with patches from chotchki. Also added documentation
1160
1161 9 May 2005; Preston Cody <codeman@gentoo.org>
1162 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1163 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1164 from bug #89683, mostly touchups.
1165
1166 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 GLIStorageDevice cleanup patch from bug #91761
1168
1169 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1170 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1171 _edit_config(). Error logging casts 'error' to str
1172
1173 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1174 Exceptions received in CC are logged before being passed to the FE. Added
1175 code to CC to handle exceptions *not* thrown by the installer itself.
1176
1177 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 get_max_mb_for_resize() returns -1 if not self.resizeable
1179
1180 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 More dirty rsync hacks :-/
1182
1183 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1184 Patches from chotchki (bug #90325) to improve CC networking. untested.
1185
1186 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1187 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1188 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1189 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1190 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1191 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1192 _get_packages_to_emerge()
1193
1194 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1195 Added group-adding code to set_users in ArchTemplate
1196
1197 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1198 Added post-install script code
1199
1200 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Fixed encapsulation issues in GLIClientController (bug #90141)
1202
1203 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1204 Update resizing code in GLIStorageDevice
1205
1206 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1207 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1208
1209 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1210 Reverted change to ArchTemplate and added support for commented line in old
1211 code.
1212
1213 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Changed _edit_config() to modify value in-place instead of commenting out and
1215 adding the new value to the end of the file.
1216
1217 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1218 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1219 Also updated TODO list.
1220
1221 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Use blackace's one-liner to add comments for all function for use with
1223 pythondoc.
1224
1225 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Moved 'end >= device_sectors' check out of loop to check for next partition's
1227 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1228 Partitioning code now tracks start/end of extended for placing logicals. End
1229 point of logical is now adjusted along with start.
1230
1231 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1232 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1233 the way of partitioning from a blank disk. Add int() around access to minor
1234 key in partition information due to new partition code leaving them as float.
1235
1236 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1238
1239 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1240 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1241
1242 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1243 Added support for DHCP options and MAC addresses in the InstallProfile.
1244
1245 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1246 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1247 sed to properly strip out junk.
1248
1249 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1250 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1251 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1252
1253 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1254 Fixed indent problem in GLICController
1255
1256 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Check for disklabel type "loop" and use the device name without a minor.
1258
1259 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 Remove /tmp/compile_output.log and /var/log/install.log when install is
1261 complete. Added code to (hopefully) keep 2nd thread running after install.
1262 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1263 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1264 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1265
1266 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1267 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1268 when unpacking tarball.
1269
1270 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1271 rewrote filesystem_tools. looks like it works so ripping out all the old
1272 filesystem_tools code.
1273
1274 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1275 Changed the print statements to logging in the partitioning BE code.
1276 the logger may need to be imported to the x86archtemplate. unknown yet.
1277 Added the finishing_cleanup function.
1278 added a fix to the logger from BenUrban
1279
1280 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1281 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1282 URIs. The blank uri check has been commented out.
1283 ripped out error checking of set_services. this is done by _add_to_runlevel.
1284
1285 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1287
1288 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1290 the install profile if available. Commented out spawn() debugging prints
1291
1292 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1293 small changes to setup_network_post. moved adding to runlevel of net.x to
1294 after the device gets symlinked. added domainname runlevel command.
1295
1296 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1297 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1298 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1299 spawn() call in livecd-kernel code to pass environment variables.
1300 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1301 the install profile if available.
1302
1303 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1305 to handle installing the livecd kernel into the new system.
1306
1307 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1308 should emerge hotplug and coldplug before adding them to runlevel.
1309
1310 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1311 took chroot out of grub_install command.
1312
1313 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1314 Changed chroot wrapper code in spawn() to write the wrapper the python way
1315 instead of the bash way to avoid quote conflicts. Added
1316 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1317 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1318 as it breaks the piping.
1319
1320 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1321 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1322
1323 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1324 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1325 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1326 GLIInstallProfile.
1327
1328 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1330 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1331 into /mnt/gentoo in prepare_chroot()
1332
1333 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1335 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1336 to start/end sectors
1337
1338 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 Add 2>&1 to cmd in spawn()
1340
1341 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Modified GLIUtility.exitsuccess() to work with return value from
1343 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1344 creates wrapper script for commands run inside chroot so multiple commands
1345 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1346 for the generated script from spawn()
1347
1348 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1349 Removed default values for stage tarball URI and portage tree URI from
1350 InstallProfile. These should be set by the FEs. also added services step to
1351 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1352 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1353
1354 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1355 Small fix for setting the default gateway. Also added feature to dialogfe.
1356
1357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1359
1360 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1361 Fixed a bunch of true -> True typos. lots of em
1362 only write new resolv.conf if there are dns servers listed.
1363
1364 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1365 Commented out 'display_on_tty8=True' in start_portmap()
1366
1367 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1368 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1369
1370 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1371 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1372 lang parameter to __init__()
1373
1374 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1375 updates to TODO list.
1376
1377 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Initial code for quickpkg GRP support. Fix loop to grab packages from
1379 'emerge -p blah'
1380
1381 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1382 check for dhcp in the network stuff and emerge it if it is.
1383 added quickpkg to TODO list
1384
1385 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1386 Changed the raising of 'warning' exceptions to a simple log of the error
1387 so that the installer can continue.
1388
1389 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1390 Some big changes. First, changed most output to display_on_tty8.
1391 Second, added log lines to all templates. Some smaller fixes such as typos.
1392 Also did some cleanups of old commented lines.
1393
1394 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1395 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1396 Undo change with fix. Escaping fix in GLIStorageDevice.py
1397
1398 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1399 more updates to TODO list. hopefully we'll soon start removing items instead
1400 of adding them.
1401
1402 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1403 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1404
1405 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1406 updated TODO list. (again)
1407
1408 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1409 changed output of portmap start to display_on_tty8.
1410 fixed bootloader for udev and multiple kernels
1411 fixed custom kernel config (again)
1412
1413 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1414 changed default value of CC._enable_ssh to True because this is smart.
1415 added code to allow custom kernel .config. may be unstable and break. sorry.
1416
1417 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1418 partition() now waits until after it checks for partition flags before delete
1419 the partitions :P
1420
1421 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1422 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1423 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1424 blank.
1425
1426 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1427 Various fixes related to the add_users function. Still not yet finished.
1428 Added things to the TODO list. Lets start using that!
1429
1430 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1431 Added code to x86Template to format newly created partitions. Also added
1432 some error checking code. GLIStorageDevice passes 'minor' with data to
1433 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1434 mounting code.
1435
1436 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1437 Took out unnecessary setting of random livecd root password. the cd already
1438 sets it randomly.
1439
1440 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 Took out an unneeded step from CC's run()
1442
1443 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1444 Attempt at detecting and adding windows partitions to lilo.
1445
1446 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1447 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1448 partition. fixed misc exit_status => exitstatus typo.
1449
1450 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1451 Added basic code for resizing filesystems with pyparted. Fixed code for
1452 resizing ntfs and ext2/3.
1453
1454 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1455 Fixed partition() in x86Template so that it scans through logicals and deletes
1456 before deleting containing extended partition. Also clears partition table to
1457 be safe before third pass.
1458
1459 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1460 Added mount_network_shares. not able to test it from this computer.
1461 will test when i get back to school.
1462 also added start_portmap to the client_controller as an always-do.
1463 agaffney says this is needed for NFS mounts to work.
1464
1465 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1466 Partial rewrite of partitioning code in x86Template. No longer shells out to
1467 parted to perform actions, now uses all pyparted calls. Code "works" in a
1468 test, but still needs lots of TLC. Also modified tests/install.py to work
1469 with x86Template and GLIClientConfiguration.
1470
1471 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1472 Initial move of partitioning code from ArchTemplate to x86Template.
1473
1474 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1475 Added grp_install and services to InstallProfile. forgot about the set_root_password
1476
1477 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1478 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1479 Test Install ran very well (skipping partitioning).
1480
1481 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1482 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1483 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1484 some may still have eluded me.
1485
1486 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1487 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1488 Just finished mount_local_partitions in GLIArchitectureTemplate
1489
1490 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1491 Added get_num_sectors() to GLIStorageDevice.
1492
1493 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1494 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1495 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1496 from GLIInstallProfile.
1497
1498 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1499 GLIStorageDevice returns "unknown" instead of "" for get_type()
1500
1501 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1502 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1503 actually work. Commented out resizability checking code for speed.
1504
1505 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1506 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1507 GLIStorageDevice at the suggestion of plors
1508
1509 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1510 Added a function to GLIUtility to pull a value from a make.conf-style config
1511 file. Minor type fix to GLIInstallProfile.py
1512
1513 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1514 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1515 network mounts from partition data structure in GLIInstallProfile
1516
1517 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1518 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1519 can be resized.
1520
1521 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1522 Added some of the final functions to GLIInstallTemplate.
1523 Yes this project is still active despite rare use of the Changelog!
1524
1525 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1526 Added the GLIPartitionTools.py file. This is a temporary insertion of
1527 partitioning tools that will eventually go into their own package.
1528
1529 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1530 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1531 for the program). Added __init__(install_profile, client_configuration) to
1532 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1533 to avoid constantly passing stuff every time we call a method.
1534
1535 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1536
1537 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1538 files without messing up all the other stuff in them. This will be used for making
1539 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1540
1541 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1542
1543 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1544 have a few basic things. I added two private methods. One is _depends(). This
1545 will be used for dependency checking (ie. unpacking a tarball requires that
1546 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1547 same syntax as os.system(), however, instead of being run in the liveCD
1548 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1549 isolated the code. Hope to work more this week to get this class formed...
1550
1551 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1552
1553 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1554 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1555 to allow for easier modification (mutable, rather than immutable objects). Updated
1556 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1557 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1558 Added initial unit test code.
1559
1560 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1561
1562 Added initial changelog. Setting up the basic structure of the CVS repository
1563 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1564 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20