/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1225 - (show annotations) (download)
Sat Jan 7 17:39:16 2006 UTC (8 years, 11 months ago) by agaffney
File size: 65600 byte(s)
  src/GLIUtility.py:
  fail immediately in validate_uri() if provided URI can't be parsed

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.568 2006/01/07 17:39:16 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 show 'Calculating dependencies for ...' in subprogress bar at beginning of
11 emerge()
12 src/GLIArchitectureTemplate.py:
13 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
14 in the chroot
15 src/GLIUtility.py:
16 fail immediately in validate_uri() if provided URI can't be parsed
17
18 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIUtility.py:
20 move parse_vdb_contents() to GLIPortage
21 src/GLIPortage.py:
22 remove all symlink fixups
23 ignore 'dir' entries in CONTENTS
24 call tar with -p
25
26 5 Jan 2006; Preston Cody <codeman@gentoo.org>
27 AT: bootsplash is now gensplash
28 gliserv: add advanced_mode to shared_info
29 webgli: Added advanced mode. mostly just disables a few screens.
30
31 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
32 src/GLIPortage.py:
33 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
34 added emerge()
35 update sub-progress after each package is emerged
36 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
37 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
38 remove link if it exists before moving content into place
39 src/GLIArchitectureTemplate.py:
40 install_packages() now calls emerge() in GLIPortage
41 change all calls to self._emerge() to self._portage.emerge()
42 comment out all emerge status checking...using exceptions now
43 call copy_pkg_to_chroot() directly for livecd-kernel
44
45 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
46 src/GLIArchitectureTemplate.py:
47 remove add_pkg_to_world() and copy_pkg_to_chroot()
48 copy installer.log to installer.log.failed on install failure
49 src/GLIUtility.py:
50 added get_keymaps()
51 spawn() takes any False argument for chroot instead of just None
52 src/GLIPortage.py:
53 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
54 change copy_pkg_to_chroot() to work properly with use_root=False
55 figure PORTAGE_TMPDIR properly
56
57 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
58 src/net/server/html/*:
59 converted showclients, load/saveprofile
60
61 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
62 src/GLIPortage.py:
63 exclude packages already in chroot vdb from binary deplist
64 chroot to use best_version for chroot's vdb
65 src/runtimedeps.py:
66 accept ROOT via commandline instead of env
67
68 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
69 src/runtimedeps.py:
70 remove passing of ROOT
71 src/GLIPortage.py:
72 modify get_deps() to get deptree for each package and merge into final list
73 remove depgraph class
74 add debugging code to get_deps()
75 src/GLIArchitectureTemplate.py:
76 combine code for GRP/compile in install_packages() into one block
77 debugging code in install_packages()
78
79 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
80 src/runtimedeps.py:
81 initial commit
82 src/GLIPortage.py:
83 use separate script for GRP deps
84 remove calls to portage module
85
86 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
87 src/GLIPortage.py:
88 initial commit
89 move some of portage function from GLIAT
90 flipped around a few function args
91 src/GLIArchitectureTemplate.py:
92 revamp install_packages() for new GLIPortage
93
94 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIArchitectureTemplate.py:
96 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
97
98 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
99 src/net/server/gliserv.py:
100 wrap generated code in a class to isolate it a bit better
101 302 redirects work
102 don't use cgi.escape() for <% %>
103 src/net/server/html/webgli/*:
104 load/save profile
105 src/GLIUtility.py:
106 change /sbin/lspci to just lspci
107
108 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
109 src/GLIClientController.py:
110 change ordering of statements in CC run() while loop to not go past the end
111 of the array
112 src/GLIArchitectureTemplate.py:
113 removed redundant bind mounts
114
115 18 Dec 2005; Preston Cody <codeman@gentoo.org>
116 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
117 added a diagram by blackace from last night.
118 added the glossary in RTF format.
119
120 17 Dec 2005; Preston Cody <codeman@gentoo.org>
121 x86AT: separated out emerge/configure from running of bootloader
122 added MBR drive support to lilo.
123 these changes will likely not work.
124 AT: added setup_and_run_bootloader step.
125
126 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
127 src/net/server/gliserv.py:
128 call generated code in a function
129 src/net/server/html/webgli/*:
130 include top/bottom
131 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
132 src/GLIClientCongifuration.py:
133 install mode magic
134
135 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
136 src/GLIClientController.py:
137 use GLIException when there's an import problem
138 added debug code to show install_steps
139 src/templates/amd64ArchitectureTemplate.py:
140 add . to import path
141 proper path this time: ../../templates
142 src/GLIArchitectureTemplate.py:
143 add _portage_best_version() function
144
145 11 Dec 2005; Preston Cody <codeman@gentoo.org>
146 added initial glossary and gimli diagram to the docs directory.
147 modify gli-dialog to allow editing of the install_profile after loading XML.
148
149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
150 src/net/server/html/webgli/:
151 converted globaluse, localuse, networkmounts, portagetree, and stageselection
152 moved saveclientconfig stuff into clientconfig
153 moved saveconfigfiles into config files
154 converted etc_portage and makedotconf
155 converted bootloader and kernel
156 convert daemons, extrapackages, networking, review, services, timezone, users
157 src/net/server/gliserv.py:
158 proper 404 handling for .pyhtml extension
159 HTML escape <% %> stuff
160 work around python's sucky regexes
161 src/GLIInstallProfile.py:
162 allow set_{rsync,ftp,http}_proxy() to accept empty values
163
164 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
165 src/net/server/gliserv.py:
166 initial commit of Legolas templating engine
167 302 redirects
168 src/net/server/html/index.html, src/net/server/webgli_template.html:
169 minor changes for new code
170 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
171 initial commit of the conversion from the monolithic WebGLIHandler.py to the
172 one file per path Legolas goodness
173 partitioning[2-4] done
174
175 5 Dec 2005; Preston Cody <codeman@gentoo.org>
176 webgli: dhcp options in CC and post-install.
177 updated comparison chart.
178 webgli: etc/portage/* and distcc support added. not too-well tested.
179
180 4 Dec 2005; Preston Cody <codeman@gentoo.org>
181 webgli_template.html: valign=top on left side.
182 webgli: fix bootloader boot_device. now working.
183 webgli: CC proxy done. post-install proxy in progress.
184
185 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
186 src/net/server/webgli_template.html:
187 increase padding for content cell to 7px and add colspan=2
188
189 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
190 webgli: added graphic bar on top
191 webgli: added hover effects on the links on the left
192 webgli: re-rendered header_bg.png to stretch without artifacts
193
194 3 Dec 2005; Preston Cody <codeman@gentoo.org>
195 webgli: make.conf disabling fixes for dynamic_stage3
196 fixed portage snapshot browse popup
197 all changes tested.
198 webgli: add debug mode to CC screen. the screen still needs lots of work.
199
200 1 Dec 2005; Preston Cody <codeman@gentoo.org>
201 added debug mode question to gli-dialog
202 added CC proxies to CC networking for gli-dialog
203 webgli: fixed skip CC networking if connection active
204 webgli: portage snapshot defaults to CD
205 webgli: bootloader mbr drive selection
206 webgli: USE flags unselectable if dynamic_stage3
207 webgli: manual extra packages and save button.
208
209 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIUtility.py:
211 change ping count to 2
212 docs/comparison.html
213 initial commit
214
215 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
216 src/templates/x86ArchitectureTemplate.py:
217 fix map() issue with grub code
218 replace kernel_names and initrd_names loops with one-liners
219
220 27 Nov 2005; Preston Cody <codeman@gentoo.org>
221 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
222 initial gli-dialog support for recommended partitioning layout and clear.
223 failure cleanup now an option for gli-dialog.
224 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
225 added comparison list and updated TODO!
226
227 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
228 src/GLIArchitectureTemplate.py:
229 fix to stage1() debug code
230 fix to stage2() debug code
231
232 26 Nov 2005; Preston Cody <codeman@gentoo.org>
233 some more bootloader code fixes. forgot boot_device != mbr_device.
234
235 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
236 src/GLIStorageDevice.py:
237 fix to unallocated space merging when last one is after part 4
238
239 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIArchitectureTemplate.py:
241 small fix to debugging code in copy_pkg_to_chroot()
242
243 23 Nov 2005; Preston Cody <codeman@gentoo.org>
244 more bugfixes with bootloader code
245 gli-dialog side appears to work
246
247 21 Nov 2005; Preston Cody <codeman@gentoo.org>
248 initial adding of boot_device to backend.
249 initial boot_device support added to gli-dialog.
250 some fixes of my poor coding
251
252 20 Nov 2005; Preston Cody <codeman@gentoo.org>
253 converted gli-dialog to use the install_package_list.
254 gtkfe has already been converted by AllanonJL
255 new way working in gli-dialog now and added to webgli.
256 added set/get_boot_device() to IP
257
258 19 Nov 2005; Preston Cody <codeman@gentoo.org>
259 get_install_package_list added to InstallProfile. This can be used by the FEs
260
261 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
262 src/templates/x86ArchitectureTemplate.py:
263 call ls with '-1 --color=no'
264
265 16 Nov 2005; Preston Cody <codeman@gentoo.org>
266 added warning (#9) to GRP ppl about stage3 tarballs
267
268 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
269 src/GLIArchitectureTemplate.py:
270 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
271 confused
272
273 13 Nov 2005; Preston Cody <codeman@gentoo.org>
274 removed protocols from rc.conf screens
275 finished initial rc.conf and make.conf in webgli
276
277 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
278 src/net/server/gliserv.py:
279 add -h option to usage()
280 show time and request URI in debug mode
281 show client IP in debug mode
282 just use IP instead of trying to do a reverse lookup
283
284 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
285 src/net/server/gliserv.py:
286 'classier' 401 message
287 proper commandline parsing
288 help via -h
289 user/pass can be specificed via commandline option
290
291 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/server/gliserv.py:
293 basic HTTP auth
294
295 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
296 src/net/server/gliserv.py:
297 dynamic module reloading (yipee!)
298 send 'Last-Modified' header for real files
299 respond to HEAD with just headers
300 src/net/server/handlers/WebGLIHandler.py:
301 icons for drives
302
303 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
304 src/net/server/handlers/WebGLIHandler.py:
305 initial 'pretty' partition table display support
306 clicking partition in 'pretty' display works instead of radio buttons
307 radio buttons and pretty display work together
308 META redirect instead of javascript
309 pretty display stretches across entire screen
310 'Recommended layout' and 'Clear drive' functions
311 properly catch exceptions from do_recommended()
312 src/GLIArchitectureTemplate.py:
313 replace preinst, copy, postinst, rm steps with qmerge
314 whoops...that shouldn't have been commented out
315 create image_dir with -p in copy_pkg_to_chroot()
316 more generic of symlink crappiness
317 new copy_pkg_to_chroot() actually works now
318
319 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
320 src/GLIStorageDevice.py:
321 initial generic disk support
322 fixes for add_partition() code
323 src/net/server/handlers/WebGLIHandler.py:
324 added support for creating generic disks
325 add new partition working
326 save and delete partitions
327
328 6 Nov 2005; Preston Cody <codeman@gentoo.org>
329 webgli: Partitioning making progress.
330
331 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
332 src/GLIArchitectureTemplate.py:
333 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
334 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
335 dir) and works around /etc/gconf symlink problem
336
337 5 Nov 2005; Preston Cody <codeman@gentoo.org>
338 webgli: lots of updates. preliminary partitioning. extra packages works.
339
340 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
341 src/net/server/gliserv.py:
342 httpd now supports HTTPS and falls back to HTTP if not available
343 make fallback actually work
344 src/net/server/SecureXMLRPCServer.py:
345 SecureSocketServer is now threaded
346
347 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
348 src/net/client/gliclient.py:
349 try to use HTTPS for XMLRPC first and fallback to HTTP
350 pretend mode
351 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
352 HTTPS XMLRPC goodness from samyron
353 pass name of certificate
354
355 31 Oct 2005; Preston Cody <codeman@gentoo.org>
356 wegli: daemons and services screens done.
357
358 30 Oct 2005; Preston Cody <codeman@gentoo.org>
359 webgli: networking and users screens
360 added return_redirect to handler.py
361 loading and saving install/client profiles works for webgli now
362 Review also done
363
364 *GLI-0.2 (27 Oct 2005)
365
366 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
367 src/templates/x86ArchitectureTemplate.py:
368 properly check for bootloader emerge exist status with exitsuccess()
369 log output of grub install command
370 add --batch --no-floppy to grub command
371 grubinstallstring only gets logged if debug is on
372 src/GLIUtility.py:
373 update progress bar to 100% when process finishes
374
375 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/GLIClientController.py:
377 added debugging code for the interaction between the 2 threads via Event()
378 src/GLIUtility.py:
379 doubled the buffer size in spawn()
380 bump buffer size up to 16384
381 only report progress in 5% increments
382 src/GLIArchitectureTemplate.py:
383 kernelpkgs.txt support code
384 above disabled because it sucks
385 added add_pkg_to_world()
386
387 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
388 src/GLIArchitectureTemplate.py:
389 use tar | tar to copy files in copy_pkg_to_chroot()
390 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
391
392 23 Oct 2005; Preston Cody <codeman@gentoo.org>
393 DEBUGGING ADDED TO AT. verbose field added to CConfig.
394
395 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
396 src/net/server/gliserv.py:
397 / maps to index.html
398 look for actual files in html/
399 src/net/html:
400 new template
401 src/GLIUtility.py:
402 added parse_vdb_contents()
403 src/GLIArchitectureTemplate.py:
404 added copy_pkg_to_chroot()
405 added debug code to dynamic-stage3
406 switch dynamic-stage3 to new method
407 lots of bug fixes from adding debug code
408
409 22 Oct 2005; Preston Cody <codeman@gentoo.org>
410 webgli initial bootloader support + changed make.conf.
411 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
412
413 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/GLIUtility.py:
415 horrible tangled mess of code that is tarball unpacking subprogress display
416 add unpack progress to portage snapshot
417 use read() instead of readlines() in spawn()
418 only update progress bar for whole percents
419
420 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
421 src/templates/x86ArchitectureTemplate.py:
422 change call to 'grub' to use GLIUtility.exitsuccess()
423 add definition of 'build_mode' in _configure_lilo()
424 src/misc/updategtkfe, src/misc/updateglid:
425 fix so subshell is called in root shell
426
427 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
428 src/net/server/handlers/WebGLIHandler.py:
429 stage screen launches URI browser in sized window with various properties set
430
431 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
432 src/misc/updategtkfe:
433 updated to actually work
434 remove previous snapshot and extracted dir before downloading
435 src/misc/updateglid:
436 updated to actually work
437 src/templates/x86ArchitectureTemplate.py:
438 fixed bug where grub code was looking for 'root+root+file_name2'
439
440 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
441 src/net/server/handlers/WebGLIHandler.py:
442 URI browser
443 added mirror selection
444 src/GLIUtility.py:
445 ls via ssh strips off ending *
446
447 16 Oct 2005; Preston Cody <codeman@gentoo.org>
448 more updates to webgli. stage selection.
449
450 11 Oct 2005; Preston Cody <codeman@gentoo.org>
451 updated webgli with preliminary Network Mounts support.
452
453 9 Oct 2005; Preston Cody <codeman@gentoo.org>
454 GenDialog: string formatting and yes/no label fixes.
455 added WebGLI template for gliserv.py
456 added WebGLIHandler as well as a definition for it in gliserv.py
457 updates to the webgli files even though they won't be there for long.
458 Utility: remove exception for non-existant grppkgs.txt until the new livecd
459 goes public.
460
461 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
462 src/net/server/gliserv.py:
463 override dict to not be so anal
464 main server now loads separate module to handle requests
465 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
466 split out profile URLs into separate handler function
467 move handlers into subdirectory
468 add Welcome and Clients handlers
469
470 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
471 src/GLIUtility.py:
472 raise exception if password prompt received twice
473
474 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
475 src/GLIUtility.py:
476 removed rot13ify()
477
478 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
479 src/net/server/gliserv.py:
480 allow for param to be passed multiple times in GET
481 no XMLRPC functions return None
482 modify POST request parsing to only create a list if needed
483 fix GET request parsing so the list creation for multiple values works
484 src/net/client/gliclient.py:
485 various typo and type mismatch fixes
486 exit after exception
487
488 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
489 src/net/client/gliclient.py:
490 initial commit
491 pass MAC to XMLRPC functions
492 src/net/server/GLIServerProfile.py:
493 rename GLIClientsProfiles to GLIServerProfile
494
495 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
496 src/net/server/gliserv.py:
497 now handles POST requests
498 move majority of request handling code to common_handler() to reduce code
499 duplication
500 profile loading
501 client reg via XMLRPC goes into SharedInfo()
502 /showclients redesign
503 template fixes
504 allow handler functions to add/change headers
505 save profile
506
507 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
508 src/net/server/GLIClientsProfiles.py:
509 initial commit
510 src/net/server/template.html:
511 initial commit
512 src/net/server/gliserv.py:
513 add template mojo
514
515 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
516 src/net/server/gliserv.py:
517 XMLRPC mojo
518
519 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/GLIArchitectureTemplate.py:
521 add code in _edit_config() to comment line where variable is defined
522 previously
523 insert new line under previous definition of variable if it exists
524 small _edit_config() cleanup
525 src/GLIStorageDevice.py:
526 add clear_partitions() function
527 new sizes for recommended partition layout
528 automatically calculate swap size for recommended layout
529
530 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
531 src/templates/x86ArchitectureTemplate.py:
532 fat16 mojo
533
534 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
535 src/GLIStorageDevice.py:
536 prevent do_recommended() from being run twice
537 rewrite do_recommended() to be more robust
538 src/GLIArchitectureTemplate.py:
539 rework _edit_config() to not write duplicate entries
540
541 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
542 src/GLIStorageDevice.py:
543 added do_recommended() function to automatically created 256M/1G/* layout
544
545 17 Sep 2005; Preston Cody <codeman@gentoo.org>
546 src/gli-dialog.py: added set_distcc to the list
547 GenDialog: added set_distcc. untested.
548 IP: added install_distcc flag.
549 AT: added install_distcc function based on the flag. runs after build_kernel
550 changed AT spawn command for distcc for nodeps.
551
552 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/GLIUtility.py:
554 add rot13ify() function
555
556 16 Sep 2005; Preston Cody <codeman@gentoo.org>
557 src/GenDialog.py
558 added a sentence of text. unchecking support added.
559
560 15 Sep 2005; Preston Cody <codeman@gentoo.org>
561 src/GLIUtility.py
562 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
563 src/GenDialog.py
564 still working on extra_packages. transformed the list to new format.
565 added GRP indication to list. untested.
566 TODO lists updated.
567 src/fe/dialog/gli-dialog.py
568 spelling mistook.
569
570 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
571 src/GLIUtility.py:
572 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
573
574 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
575 src/GLIUtility.py:
576 add get_directory_listing_from_uri()
577 add http support to above
578 add ftp support to above
579 add scp support to above
580 src/GLIArchitectureTemplate.py:
581 "0" instead of 0 for key of single-element dict passed to _edit_config()
582
583 5 Sep 2005; Preston Cody <codeman@gentoo.org>
584 value_only -> only_value
585
586 3 Sep 2005; Preston Cody <codeman@gentoo.org>
587 gutted out all of etc_portage structure since it is now all handled by
588 etc_files
589
590 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/GLIArchitectureTemplate.py:
592 install_packages() sends progress update notifications
593 src/templates/x86ArchitectureTemplate.py:
594 increase sleep to 5s between format tries
595 src/GLIClientController.py:
596 pass 'self' to AT instead of 'self._pretend'
597
598 2 Sep 2005; Preston Cody <codeman@gentoo.org>
599 logger -> logger.log in x86AT
600
601 1 Sep 2005; Preston Cody <codeman@gentoo.org>
602 added set_etc_portage to IP. debugging gli-d's support for it.
603
604 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
605 src/templates/x86ArchitectureTemplate.py:
606 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
607
608 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
609 src/GLIArchitectureTemplate.py:
610 add _portage_best_version() function and rework install_packages() to allow
611 for future X of Y tracking
612 Use best_visible instead of best_version
613 tracked down and fixed missing = causing empty install extra packages
614 use = when emerging also
615 quickpkg hokey pokey
616 run _get_packages_to_emerge() again with -pk
617
618 22 Aug 2005; Preston Cody <codeman@gentoo.org>
619 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
620 the end of install_packages.
621 added updateglid to /src/misc
622 updated all core files with new GPL notice and copyright statement.
623
624 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
625 src/GLIUtility.py:
626 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
627 a snapshot in /mnt/cdrom/snapshots/
628 get_snapshot_from_cd() adds file:// at the beginning
629 change calls to extra package special case functions to 'self.blah'
630
631 21 Aug 2005; Preston Cody <codeman@gentoo.org>
632 src/ArchTemplate: changed "voodoo".
633 changed order of portage sync methods. made a fallback to webrsync if
634 normal emerge sync fails.
635 removed get_sources_from_cd because it is obsolete.
636 add special cases to install_packages. remove fatal exception on package
637 install failure b/c the box will still be bootable.
638 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
639 handled in the FEs.
640 src/GenDialog: added a bunch of code for dealing with x11-based packages.
641 awaiting testing.
642
643 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
644 src/GLIStorageDevice.py:
645 global try/except block around fs resizable detection code
646 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
647 install-failed cleanup function
648
649 18 Aug 2005; Preston Cody <codeman@gentoo.org>
650 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
651
652 16 Aug 2005; Preston Cody <codeman@gentoo.org>
653 GLIGenDialog:
654 add drive choices for loaded configs.
655 force snapshot for dynamic_stage3
656 init the snapshoturi input to the cd snapshot if not already selected.
657 if dynamic_stage3, skip the make.conf step.
658 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
659 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
660
661 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
662 src/GLIArchitectureTemplate.py:
663 manually call MAKEDEV in stage3-dynamic code
664 copy /etc/inittab.old to /etc/inittab in chroot
665 src/GLIUtility.py:
666 add beginning of validate_uri() function
667 add file:/// support to validate_uri()
668 single quotes when setting livecd password
669
670 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
671 src/GLIGenDialog.py:
672 change getmountpoint() to get_mountpoint()
673 src/misc/updategtkfe:
674 committed script to automatically download latest snapshot and run gtkfe
675 src/templates/x86ArchitectureTemplate.py:
676 fix _configure_lilo_add_windows() for IP -> GLISD stuff
677 src/GLIArchitectureTemplate.py:
678 give tmp_minor an initial value in mount_local_partitions so that the value
679 remain from the previous drive
680
681 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
682 src/templates/x86ArchitectureTemplate.py:
683 Fix _configure_lilo() for IP using GLISD stuff
684 src/GLIArchitectureTemplate.py:
685 install_cron_daemon() treats "none" specially
686
687 14 Aug 2005; Preston Cody <codeman@gentoo.org>
688 old patch from Steven Mertens to resolve bug #96642
689 numerous asthetic changes to GenDialog, no real functionality changes though.
690 strings renamed for global use if necessary.
691 fix all three parts of bug 102291
692 disable set_etc_portage until fully-written.
693
694 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
695 src/GLIClientController.py:
696 lower-case http/ftp proxy envvars
697
698 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
699 src/GLIClientController.py:
700 log end of pre_install steps to aid in debugging
701 src/templates/x86ArchitectureTemplate.py:
702 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
703
704 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
705 src/GLIArchitectureTemplate.py
706 check to make sure that the device node we're wait for to exist isn't of
707 type 'free'
708
709 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
710 src/GLIGenDialog.py:
711 convert install_packages to list in set_extra_packages()
712 check return code of checklist() call in "Manual" section
713 *actually* fix the first problem
714
715 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
716 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
717 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
718
719 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
720 src/GLIArchitectureTemplate.py:
721 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
722
723 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
724 Add CDATA support to SimpleXMLParser and add utility functions for it.
725
726 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
727 src/GLIArchitectureTemplate.py:
728 Fix case where vixie-cron is specified as a full package atom, as we still
729 don't want to run 'crontab /etc/crontab' for it.
730
731 *GLI-0.1 (3 Aug 2005)
732
733 30 Jul 2005; Preston Cody <codeman@gentoo.org>
734 add scp to list of is_uri() so GenDialog doesn't complain.
735 fixed livecd-kernel bug in bootloader code.
736 fixed gendialog for dynamic_stage3 instead of "networkless"
737 change bootloader to allow for both initrd and initramfs.
738 fix IP for dynamic_stage3.
739 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
740
741 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
742 Added full scp:// URI support to get_uri() in GLIUtility
743 Remove "networkless" from dynamic stage3 if locic.
744 Remove print statement from scp:// code.
745 Change scp code to check for "assword: " instead of "Password:"
746 Fix post-install network code to create net.eth1+ symlink correctly
747 Check to make sure pkg can be split on / and some debugging code
748 Add 2>dev/null to emerge call in _get_packages_to_emerge()
749 SimpleXMLParser handles True/False/None correctly now
750 Comment out above fix
751 Add partitioning wait-for-device-to-exist code to mount_local_partitions
752
753 28 Jul 2005; Scott Myron <samyron@gentoo.org>
754 Removed a FIXME in the GLIClientConfiguration that is no
755 longer needed.
756
757 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
758 Default to x86 in ClientConfig
759 Typo in build-a-stage3 code.
760 Remove MAKEDEV call in build-a-stage3 postscript.
761
762 26 Jul 2005; Preston Cody <codeman@gentoo.org>
763 Rewrote init of IP for gli-d. Other GenDialog updates.
764 allow network_type to be None in CConfig.
765
766 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
767 Add _dynamic_stage3 option to IP.
768 Add check for that option to dynamic stage3 code in ArchTemplate.
769 Fix code to determine default route in get_eth_info() in GLIUtility.
770 Fix serialization of dns-servers in ClientConfig.
771
772 24 Jul 2005; Preston Cody <codeman@gentoo.org>
773 changed default values of cron/logger in IP.
774 moved GenDialog IP init out to the individual files. gli-dialog's version
775 will change quite a bit.
776
777 22 Jul 2005; Preston Cody <codeman@gentoo.org>
778 added ppcArchTemplate. blank now. working on yaboot.
779 modified ArchTemplate for amd64 and ppc custom kernels.
780 skeleton implementation of _configure_yaboot.
781 small fixes to other templates.
782
783 21 Jul 2005; Preston Cody <codeman@gentoo.org>
784 GenDialog updates. changed comment in IP.
785
786 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
787 src/GLIInstallProfile.py:
788 Fix codeman's screwup of changing the service seperator to ',' in the parser
789 without changing it in the serialization code! Also document this in a
790 comment so you find it easier. Everybody needs to make sure they update
791 their install profiles!
792
793 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
794 src/GLIArchitectureTemplate.py:
795 Fix casting of list to string and concat of None with string, as well as
796 commented prototype of checking that mounting actually worked (found a case
797 where mount can return success, but the mount won't be done).
798
799 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
800 src/templates/x86ArchitectureTemplate.py:
801 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
802 checking for the device, and sleeping 1 second each time.
803
804 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
805 src/templates/x86ArchitectureTemplate.py:
806 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
807 bootloader works again. Also rename _install_{grub,lilo} to
808 _configure_{grub,lilo} since they don't install the loaders anymore
809 themselves.
810
811 7 Jul 2005; Preston Cody <codeman@gentoo.org>
812 fix global USE flags to not include the arch types at the end.
813 updates to GenDialog and gli-d.
814
815 6 Jul 2005; Preston Cody <codeman@gentoo.org>
816 fixing bootloader code for no initrd and initrd->initramfs naming change.
817
818 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
819 Proper comments and parameters to GLIException in install_mta()
820 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
821 Add strip() to list_mirrors(), list_subarch_from_mirror() and
822 list_tarball_from_mirror() to eliminate blank last item.
823
824 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
825 Added stage3 generation code.
826
827 5 Jul 2005; Preston Cody <codeman@gentoo.org>
828 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
829 Mild changes to GenDialog.
830
831 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
832 Remove separate install step configure_rc_conf() since it's handled by
833 update_config_files()
834 Make a copy of newvalues in _edit_config() so quotes aren't added when the
835 function is called twice on the same file.
836
837 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
838 Missing \ in sed in _get_packages_to_emerge()
839 Removed explicit emerging of hotplug and no longer add it to the runlevel.
840 Check in _quickpkg_deps() to ignore blank package names returned from
841 _get_packages_to_emerge()
842
843 28 Jun 2005; Preston Cody <codeman@gentoo.org>
844 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
845 in the dialog.py gauge code.
846
847 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
848 Add code to update_config_files() to go through etc_files and update stuff.
849 Check to see that _etc_files['make.conf'] exists in get_make_conf()
850 Only use float() in partition xml parsing code if type == "free"
851
852 28 Jun 2005; Preston Cody <codeman@gentoo.org>
853 finished almost all internationalization of GenDialog.
854 attempt at fixing rc.conf function. moved 3 generate functions out of
855 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
856 added dialog.py to the fe/dialog directory so it actually gets used.
857
858 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
859 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
860
861 27 Jun 2005; Preston Cody <codeman@gentoo.org>
862 fix extra entry in list_mirrors()
863 beginning internationalization runthrough.
864
865 26 Jun 2005; Preston Cody <codeman@gentoo.org>
866 added dialog.py to /src temporarily until it gets accepted upstream.
867 fix for unused value in form in dialog.py and changed heights.
868 fix GenDialog forms.
869
870 25 Jun 2005; Preston Cody <codeman@gentoo.org>
871 Changed hostname/domainname for new baselayout.
872 Changed _add_to_runlevel errors to logs.
873 Updated TODO list to show status of GenDialog
874 More updates to GenDialog including two checklists that probably won't work.
875 update IP to use comma-separated list instead of space separated for services.
876
877 24 Jun 2005; Preston Cody <codeman@gentoo.org>
878 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
879 GenDialog as it gets closer to completion.
880
881 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
882 Modify get_eth_info() to take a full interface name (eth0 fex). float()
883 instead of int() in add_partition_device_partition() for minor (closes 96804)
884
885 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
886 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
887 instead of 'interfaces[interface][1]' since DHCP uses that field for its
888 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
889
890 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
891 Apply spawn() patch from #96644 (with minor changes). Make sure the return
892 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
893 small error with <pipe>.close() returning None. Fix space vs. tab issue.
894 Fix undefined variable 'output' issue in spawn().
895
896 20 Jun 2005; Preston Cody <codeman@gentoo.org>
897 More updates to GenDialog and gli-d.
898
899 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
900 Modify list_mirrors() to return a list of mirror URL/name pairs.
901
902 19 Jun 2005; Preston Cody <codeman@gentoo.org>
903 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
904 get subarch.
905
906 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
907 Backend partitioning will create disklabel is none exists. Installprofile
908 defaults to "" now instead of "msdos" for disklabel type. Fix for
909 mount_local_partitions() to remember device along with minor in the
910 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
911 add else block to log unsupported netmount types to mount_network_shares()
912
913 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
914 src/GLIArchitectureTemplate.py:
915 Refactor kernel_compile common stuff, fix 2.4 build process.
916 src/fe/cli/clife.py:
917 Logging system.
918 src/GLIUtility.py, src/GLIStorageDevice.py:
919 Add comments about re-writes needed for boxes without sysfs.
920
921 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
922 src/GLIArchitectureTemplate.py:
923 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
924 'make dep' call for custom compile. build_mode support for prepare-only and
925 none types completed. custom compile function chains shell functions in
926 spawned script, to allow for catching all errors.
927
928 15 Jun 2005; Preston Cody <codeman@gentoo.org>
929 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
930 and GenDialog. other gendialog updates as well. kernel updates untested.
931
932 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
933 src/GLIInstallProfile.py:
934 Change structure of etc-portage stuff. The serialization was broken before my
935 last commit, and I am the only person that's ever used it. The new schema is
936 as follows:
937 <etc-portage>
938 <file name="package.mask"/>
939 <file name="package.unmask">
940 <entry atom="sys-kernel/openmosix-sources"/>
941 </file>
942 <file name="package.use">
943 <entry atom="sys-libs/db">
944 -java
945 </entry>
946 <entry atom="dev-libs/cyrus-sasl">
947 -ldap
948 </entry>
949 </file>
950 </etc-portage>
951
952
953 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
954 src/GLIInstallProfile.py:
955 Add new entry for gli-profile/kernel-build-method item. Add missing
956 serialize_etc_portage (temporary). Make serialize_make_conf always print the
957 keys in the same order.
958
959 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
960 src/GLIArchitectureTemplate.py:
961 Clean up commenting used by _edit_config(), and fix bug where wrong comment
962 was repeatedly appended to make.conf.
963
964 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
965 src/GLIArchitectureTemplate.py:
966 Put some Linux-2.6 specific code under a if statement. Store list of
967 successfully mounted swap device for using swapoff. Add proper error checking
968 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
969 'file'. Clean up some redundant code (thanks to pychecker).'
970
971 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
972 Fix typos: get_extended() instead of get_extended_partition(). Added
973 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
974 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
975
976 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
977 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
978 in add_network_interface.
979
980 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
981 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
982 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
983 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
984 prepare_chroot.
985
986 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
987 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
988 +src/fe/installer-gtk:
989 Add new automated CLI frontend. Add scripts that are the intended means to
990 use each frontend.
991
992 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
993 src/GLIClientController.py:
994 Add null type to network config, for cases where the interface is already up
995 and should not be touched (netboot for example).
996
997 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
998 src/GLIArchitectureTemplate.py:
999 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1000 string!. Try to use binary packages if available by default.
1001
1002 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1003 src/GLIArchitectureTemplate.py:
1004 More error checking for _add_to_runlevel, to ensure that the init script
1005 actually exists before we try to add it. set_services phase must take place
1006 after the package installation, otherwise the init scripts might not exist.
1007 Find the correct init script for the cron and logging daemons, and add that
1008 instead of the package atom.
1009
1010 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1011 src/GLIArchitectureTemplate.py:
1012 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1013 usage of 'file' to 'contents' for the variable name, as it shadows
1014 __builtin__.file.
1015
1016 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1017 src/GLIArchitectureTemplate.py:
1018 Add MTA install code, and include MTA install phase. Ensure
1019 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1020 for 'none' kernel config for build_kernel phase. Put kernel_script in
1021 /var/tmp instead of /root for build_kernel phase.
1022
1023 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1024 Rename mta variables to match syslog/cron variables.
1025
1026 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1027 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1028 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1029 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1030 src/templates/.cvsignore, src/tests/.cvsignore:
1031 Refactor partition formatting again to include error checking. Allow 'none'
1032 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1033
1034 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1035 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1036 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1037 only have a single spawn call.
1038
1039 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1040 refixed samyron's fix of set_architecture_template.
1041
1042 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1043 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1044 be executable.
1045
1046 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1047 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1048 error checking when you call set_architecture_template.
1049
1050 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1051 moved the mkfsopts input to the partition options menu instead of the during
1052 the creation process. updated GenDialog to say it supports reiserfs v3.
1053
1054 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1055 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1056 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1057 Add support for other partition types to dialogfe.
1058 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1059 avoid integer overflows and wraparounds.
1060
1061 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1062 Removed start/end from XML output and added mkfsopts to partitioning info.
1063 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1064 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1065 in GLIClientConfiguration. Change from .1 and .9 to constants for
1066 partitioning. Fix free space overwriting bug. Remove a few unused functions
1067 from rewrite. Fix call to get_partition_at()
1068
1069 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1070 Updates to GenDialog and dialogfe.
1071
1072 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1073 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1074
1075 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1076 more GenDialog updates to partitioning.
1077
1078 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1079 Indenting issue in GLISD/get_ordered_partition_list.
1080 updates to GenDialog partitioning and added default UTC for timezone in IP.
1081
1082 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1083 Added GLISD.get_model()
1084
1085 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1086 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1087 More updates to GenDialog :)
1088
1089 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1090 Added get_interface_realname() function.
1091
1092 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1093 Added auto-save of CConfig and copying to new /root after install.
1094 yet even more GenDialog updates.
1095
1096 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1097 removed print statement from GLISD. more updates to GenDialog.
1098
1099 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1101 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1102 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1103 places in GLIClientConfiguration.
1104
1105 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1106 Fix mount_local_partitions(), configure_fstab(), and
1107 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1108 A few more fixes for templates/x86Archtemplate
1109
1110 27 May 2005; Preston Cody <codeman@gentoo.org>
1111 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1112 a work in progress.
1113
1114 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1115 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1116 directly. GLISD can now handle data imported from XML.
1117
1118 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1119 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1120 handle blank (no disklabel) disks.
1121
1122 20 May 2005; Preston Cody <codeman@gentoo.org>
1123 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1124 up, documented, and separated out serialization and grouped all sections.
1125
1126 19 May 2005; Preston Cody <codeman@gentoo.org>
1127 Reorganization of ClientConfiguration and gutting of unused functions.
1128 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1129
1130 18 May 2005; Preston Cody <codeman@gentoo.org>
1131 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1132
1133 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1135 partitioning. CC serializes install profile to disk and prepare_chroot()
1136 copies it into /mnt/gentoo/root
1137
1138 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1139 Moved URI parsing into new function parse_uri()
1140
1141 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1142 Added XMLParser module.
1143
1144 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1145 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1146 Minor fix to is_uri() regex to allow hyphens in hostname.
1147
1148 12 May 2005; Preston Cody <codeman@gentoo.org>
1149 Updated finishing_cleanup for new unmounting method from agaffney.
1150
1151 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1152 Fix GLILogger to use correct time format string. Fix _edit_config() to
1153 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1154 unicode support to is_realstring().
1155
1156 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1157 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1158 return value instead of non-zero. Add code to output a traceback to the
1159 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1160 instead of --nocolor.
1161
1162 10 May 2005; Preston Cody <codeman@gentoo.org>
1163 Added GLIGenDialog.py to make a generic class for the dialog functions that
1164 can be used by both dialogfe and the netfe/be. updated both for new filename.
1165 date changes. 2004->2005.
1166
1167 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1168 Removed 'quiet=True' from spawn() calls
1169
1170 10 May 2005; Preston Cody <codeman@gentoo.org>
1171 Updated GLIUtility with patches from chotchki. Also added documentation
1172
1173 9 May 2005; Preston Cody <codeman@gentoo.org>
1174 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1175 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1176 from bug #89683, mostly touchups.
1177
1178 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 GLIStorageDevice cleanup patch from bug #91761
1180
1181 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1182 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1183 _edit_config(). Error logging casts 'error' to str
1184
1185 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1186 Exceptions received in CC are logged before being passed to the FE. Added
1187 code to CC to handle exceptions *not* thrown by the installer itself.
1188
1189 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 get_max_mb_for_resize() returns -1 if not self.resizeable
1191
1192 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 More dirty rsync hacks :-/
1194
1195 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1196 Patches from chotchki (bug #90325) to improve CC networking. untested.
1197
1198 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1199 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1200 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1201 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1202 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1203 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1204 _get_packages_to_emerge()
1205
1206 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1207 Added group-adding code to set_users in ArchTemplate
1208
1209 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1210 Added post-install script code
1211
1212 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1213 Fixed encapsulation issues in GLIClientController (bug #90141)
1214
1215 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1216 Update resizing code in GLIStorageDevice
1217
1218 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1219 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1220
1221 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Reverted change to ArchTemplate and added support for commented line in old
1223 code.
1224
1225 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Changed _edit_config() to modify value in-place instead of commenting out and
1227 adding the new value to the end of the file.
1228
1229 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1230 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1231 Also updated TODO list.
1232
1233 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1234 Use blackace's one-liner to add comments for all function for use with
1235 pythondoc.
1236
1237 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Moved 'end >= device_sectors' check out of loop to check for next partition's
1239 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1240 Partitioning code now tracks start/end of extended for placing logicals. End
1241 point of logical is now adjusted along with start.
1242
1243 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1245 the way of partitioning from a blank disk. Add int() around access to minor
1246 key in partition information due to new partition code leaving them as float.
1247
1248 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1249 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1250
1251 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1252 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1253
1254 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1255 Added support for DHCP options and MAC addresses in the InstallProfile.
1256
1257 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1259 sed to properly strip out junk.
1260
1261 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1262 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1263 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1264
1265 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1266 Fixed indent problem in GLICController
1267
1268 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 Check for disklabel type "loop" and use the device name without a minor.
1270
1271 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1272 Remove /tmp/compile_output.log and /var/log/install.log when install is
1273 complete. Added code to (hopefully) keep 2nd thread running after install.
1274 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1275 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1276 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1277
1278 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1279 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1280 when unpacking tarball.
1281
1282 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1283 rewrote filesystem_tools. looks like it works so ripping out all the old
1284 filesystem_tools code.
1285
1286 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1287 Changed the print statements to logging in the partitioning BE code.
1288 the logger may need to be imported to the x86archtemplate. unknown yet.
1289 Added the finishing_cleanup function.
1290 added a fix to the logger from BenUrban
1291
1292 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1293 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1294 URIs. The blank uri check has been commented out.
1295 ripped out error checking of set_services. this is done by _add_to_runlevel.
1296
1297 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1299
1300 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1301 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1302 the install profile if available. Commented out spawn() debugging prints
1303
1304 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1305 small changes to setup_network_post. moved adding to runlevel of net.x to
1306 after the device gets symlinked. added domainname runlevel command.
1307
1308 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1310 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1311 spawn() call in livecd-kernel code to pass environment variables.
1312 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1313 the install profile if available.
1314
1315 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1316 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1317 to handle installing the livecd kernel into the new system.
1318
1319 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1320 should emerge hotplug and coldplug before adding them to runlevel.
1321
1322 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1323 took chroot out of grub_install command.
1324
1325 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1326 Changed chroot wrapper code in spawn() to write the wrapper the python way
1327 instead of the bash way to avoid quote conflicts. Added
1328 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1329 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1330 as it breaks the piping.
1331
1332 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1333 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1334
1335 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1337 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1338 GLIInstallProfile.
1339
1340 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1341 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1342 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1343 into /mnt/gentoo in prepare_chroot()
1344
1345 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1346 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1347 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1348 to start/end sectors
1349
1350 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Add 2>&1 to cmd in spawn()
1352
1353 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 Modified GLIUtility.exitsuccess() to work with return value from
1355 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1356 creates wrapper script for commands run inside chroot so multiple commands
1357 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1358 for the generated script from spawn()
1359
1360 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1361 Removed default values for stage tarball URI and portage tree URI from
1362 InstallProfile. These should be set by the FEs. also added services step to
1363 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1364 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1365
1366 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1367 Small fix for setting the default gateway. Also added feature to dialogfe.
1368
1369 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1370 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1371
1372 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1373 Fixed a bunch of true -> True typos. lots of em
1374 only write new resolv.conf if there are dns servers listed.
1375
1376 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1377 Commented out 'display_on_tty8=True' in start_portmap()
1378
1379 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1380 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1381
1382 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1383 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1384 lang parameter to __init__()
1385
1386 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1387 updates to TODO list.
1388
1389 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Initial code for quickpkg GRP support. Fix loop to grab packages from
1391 'emerge -p blah'
1392
1393 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1394 check for dhcp in the network stuff and emerge it if it is.
1395 added quickpkg to TODO list
1396
1397 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1398 Changed the raising of 'warning' exceptions to a simple log of the error
1399 so that the installer can continue.
1400
1401 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1402 Some big changes. First, changed most output to display_on_tty8.
1403 Second, added log lines to all templates. Some smaller fixes such as typos.
1404 Also did some cleanups of old commented lines.
1405
1406 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1407 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1408 Undo change with fix. Escaping fix in GLIStorageDevice.py
1409
1410 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1411 more updates to TODO list. hopefully we'll soon start removing items instead
1412 of adding them.
1413
1414 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1416
1417 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1418 updated TODO list. (again)
1419
1420 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1421 changed output of portmap start to display_on_tty8.
1422 fixed bootloader for udev and multiple kernels
1423 fixed custom kernel config (again)
1424
1425 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1426 changed default value of CC._enable_ssh to True because this is smart.
1427 added code to allow custom kernel .config. may be unstable and break. sorry.
1428
1429 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1430 partition() now waits until after it checks for partition flags before delete
1431 the partitions :P
1432
1433 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1435 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1436 blank.
1437
1438 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1439 Various fixes related to the add_users function. Still not yet finished.
1440 Added things to the TODO list. Lets start using that!
1441
1442 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1443 Added code to x86Template to format newly created partitions. Also added
1444 some error checking code. GLIStorageDevice passes 'minor' with data to
1445 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1446 mounting code.
1447
1448 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1449 Took out unnecessary setting of random livecd root password. the cd already
1450 sets it randomly.
1451
1452 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1453 Took out an unneeded step from CC's run()
1454
1455 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1456 Attempt at detecting and adding windows partitions to lilo.
1457
1458 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1459 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1460 partition. fixed misc exit_status => exitstatus typo.
1461
1462 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1463 Added basic code for resizing filesystems with pyparted. Fixed code for
1464 resizing ntfs and ext2/3.
1465
1466 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1467 Fixed partition() in x86Template so that it scans through logicals and deletes
1468 before deleting containing extended partition. Also clears partition table to
1469 be safe before third pass.
1470
1471 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1472 Added mount_network_shares. not able to test it from this computer.
1473 will test when i get back to school.
1474 also added start_portmap to the client_controller as an always-do.
1475 agaffney says this is needed for NFS mounts to work.
1476
1477 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1478 Partial rewrite of partitioning code in x86Template. No longer shells out to
1479 parted to perform actions, now uses all pyparted calls. Code "works" in a
1480 test, but still needs lots of TLC. Also modified tests/install.py to work
1481 with x86Template and GLIClientConfiguration.
1482
1483 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1484 Initial move of partitioning code from ArchTemplate to x86Template.
1485
1486 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1487 Added grp_install and services to InstallProfile. forgot about the set_root_password
1488
1489 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1490 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1491 Test Install ran very well (skipping partitioning).
1492
1493 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1494 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1495 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1496 some may still have eluded me.
1497
1498 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1499 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1500 Just finished mount_local_partitions in GLIArchitectureTemplate
1501
1502 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1503 Added get_num_sectors() to GLIStorageDevice.
1504
1505 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1507 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1508 from GLIInstallProfile.
1509
1510 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1511 GLIStorageDevice returns "unknown" instead of "" for get_type()
1512
1513 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1514 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1515 actually work. Commented out resizability checking code for speed.
1516
1517 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1518 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1519 GLIStorageDevice at the suggestion of plors
1520
1521 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1522 Added a function to GLIUtility to pull a value from a make.conf-style config
1523 file. Minor type fix to GLIInstallProfile.py
1524
1525 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1526 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1527 network mounts from partition data structure in GLIInstallProfile
1528
1529 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1530 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1531 can be resized.
1532
1533 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1534 Added some of the final functions to GLIInstallTemplate.
1535 Yes this project is still active despite rare use of the Changelog!
1536
1537 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1538 Added the GLIPartitionTools.py file. This is a temporary insertion of
1539 partitioning tools that will eventually go into their own package.
1540
1541 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1542 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1543 for the program). Added __init__(install_profile, client_configuration) to
1544 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1545 to avoid constantly passing stuff every time we call a method.
1546
1547 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1548
1549 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1550 files without messing up all the other stuff in them. This will be used for making
1551 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1552
1553 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1554
1555 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1556 have a few basic things. I added two private methods. One is _depends(). This
1557 will be used for dependency checking (ie. unpacking a tarball requires that
1558 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1559 same syntax as os.system(), however, instead of being run in the liveCD
1560 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1561 isolated the code. Hope to work more this week to get this class formed...
1562
1563 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1564
1565 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1566 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1567 to allow for easier modification (mutable, rather than immutable objects). Updated
1568 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1569 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1570 Added initial unit test code.
1571
1572 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1573
1574 Added initial changelog. Setting up the basic structure of the CVS repository
1575 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1576 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20