/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1231 - (show annotations) (download)
Sat Jan 7 23:16:08 2006 UTC (8 years, 8 months ago) by agaffney
File size: 65784 byte(s)
total_steps was 1 too high

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.571 2006/01/07 23:16:08 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 show 'Calculating dependencies for ...' in subprogress bar at beginning of
11 emerge()
12 src/GLIArchitectureTemplate.py:
13 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
14 in the chroot
15 remove _quickpkg_deps() and _portage_best_{visible,version}()
16 src/GLIUtility.py:
17 fail immediately in validate_uri() if provided URI can't be parsed
18 src/templates/x86ArchitectureTemplate.py:
19 basic subprogress reporting for partitioning
20 total_steps was 1 too high
21
22 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
23 src/GLIUtility.py:
24 move parse_vdb_contents() to GLIPortage
25 src/GLIPortage.py:
26 remove all symlink fixups
27 ignore 'dir' entries in CONTENTS
28 call tar with -p
29
30 5 Jan 2006; Preston Cody <codeman@gentoo.org>
31 AT: bootsplash is now gensplash
32 gliserv: add advanced_mode to shared_info
33 webgli: Added advanced mode. mostly just disables a few screens.
34
35 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
36 src/GLIPortage.py:
37 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
38 added emerge()
39 update sub-progress after each package is emerged
40 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
41 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
42 remove link if it exists before moving content into place
43 src/GLIArchitectureTemplate.py:
44 install_packages() now calls emerge() in GLIPortage
45 change all calls to self._emerge() to self._portage.emerge()
46 comment out all emerge status checking...using exceptions now
47 call copy_pkg_to_chroot() directly for livecd-kernel
48
49 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
50 src/GLIArchitectureTemplate.py:
51 remove add_pkg_to_world() and copy_pkg_to_chroot()
52 copy installer.log to installer.log.failed on install failure
53 src/GLIUtility.py:
54 added get_keymaps()
55 spawn() takes any False argument for chroot instead of just None
56 src/GLIPortage.py:
57 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
58 change copy_pkg_to_chroot() to work properly with use_root=False
59 figure PORTAGE_TMPDIR properly
60
61 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
62 src/net/server/html/*:
63 converted showclients, load/saveprofile
64
65 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
66 src/GLIPortage.py:
67 exclude packages already in chroot vdb from binary deplist
68 chroot to use best_version for chroot's vdb
69 src/runtimedeps.py:
70 accept ROOT via commandline instead of env
71
72 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
73 src/runtimedeps.py:
74 remove passing of ROOT
75 src/GLIPortage.py:
76 modify get_deps() to get deptree for each package and merge into final list
77 remove depgraph class
78 add debugging code to get_deps()
79 src/GLIArchitectureTemplate.py:
80 combine code for GRP/compile in install_packages() into one block
81 debugging code in install_packages()
82
83 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
84 src/runtimedeps.py:
85 initial commit
86 src/GLIPortage.py:
87 use separate script for GRP deps
88 remove calls to portage module
89
90 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIPortage.py:
92 initial commit
93 move some of portage function from GLIAT
94 flipped around a few function args
95 src/GLIArchitectureTemplate.py:
96 revamp install_packages() for new GLIPortage
97
98 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIArchitectureTemplate.py:
100 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
101
102 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
103 src/net/server/gliserv.py:
104 wrap generated code in a class to isolate it a bit better
105 302 redirects work
106 don't use cgi.escape() for <% %>
107 src/net/server/html/webgli/*:
108 load/save profile
109 src/GLIUtility.py:
110 change /sbin/lspci to just lspci
111
112 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
113 src/GLIClientController.py:
114 change ordering of statements in CC run() while loop to not go past the end
115 of the array
116 src/GLIArchitectureTemplate.py:
117 removed redundant bind mounts
118
119 18 Dec 2005; Preston Cody <codeman@gentoo.org>
120 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
121 added a diagram by blackace from last night.
122 added the glossary in RTF format.
123
124 17 Dec 2005; Preston Cody <codeman@gentoo.org>
125 x86AT: separated out emerge/configure from running of bootloader
126 added MBR drive support to lilo.
127 these changes will likely not work.
128 AT: added setup_and_run_bootloader step.
129
130 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
131 src/net/server/gliserv.py:
132 call generated code in a function
133 src/net/server/html/webgli/*:
134 include top/bottom
135 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
136 src/GLIClientCongifuration.py:
137 install mode magic
138
139 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
140 src/GLIClientController.py:
141 use GLIException when there's an import problem
142 added debug code to show install_steps
143 src/templates/amd64ArchitectureTemplate.py:
144 add . to import path
145 proper path this time: ../../templates
146 src/GLIArchitectureTemplate.py:
147 add _portage_best_version() function
148
149 11 Dec 2005; Preston Cody <codeman@gentoo.org>
150 added initial glossary and gimli diagram to the docs directory.
151 modify gli-dialog to allow editing of the install_profile after loading XML.
152
153 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
154 src/net/server/html/webgli/:
155 converted globaluse, localuse, networkmounts, portagetree, and stageselection
156 moved saveclientconfig stuff into clientconfig
157 moved saveconfigfiles into config files
158 converted etc_portage and makedotconf
159 converted bootloader and kernel
160 convert daemons, extrapackages, networking, review, services, timezone, users
161 src/net/server/gliserv.py:
162 proper 404 handling for .pyhtml extension
163 HTML escape <% %> stuff
164 work around python's sucky regexes
165 src/GLIInstallProfile.py:
166 allow set_{rsync,ftp,http}_proxy() to accept empty values
167
168 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
169 src/net/server/gliserv.py:
170 initial commit of Legolas templating engine
171 302 redirects
172 src/net/server/html/index.html, src/net/server/webgli_template.html:
173 minor changes for new code
174 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
175 initial commit of the conversion from the monolithic WebGLIHandler.py to the
176 one file per path Legolas goodness
177 partitioning[2-4] done
178
179 5 Dec 2005; Preston Cody <codeman@gentoo.org>
180 webgli: dhcp options in CC and post-install.
181 updated comparison chart.
182 webgli: etc/portage/* and distcc support added. not too-well tested.
183
184 4 Dec 2005; Preston Cody <codeman@gentoo.org>
185 webgli_template.html: valign=top on left side.
186 webgli: fix bootloader boot_device. now working.
187 webgli: CC proxy done. post-install proxy in progress.
188
189 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
190 src/net/server/webgli_template.html:
191 increase padding for content cell to 7px and add colspan=2
192
193 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
194 webgli: added graphic bar on top
195 webgli: added hover effects on the links on the left
196 webgli: re-rendered header_bg.png to stretch without artifacts
197
198 3 Dec 2005; Preston Cody <codeman@gentoo.org>
199 webgli: make.conf disabling fixes for dynamic_stage3
200 fixed portage snapshot browse popup
201 all changes tested.
202 webgli: add debug mode to CC screen. the screen still needs lots of work.
203
204 1 Dec 2005; Preston Cody <codeman@gentoo.org>
205 added debug mode question to gli-dialog
206 added CC proxies to CC networking for gli-dialog
207 webgli: fixed skip CC networking if connection active
208 webgli: portage snapshot defaults to CD
209 webgli: bootloader mbr drive selection
210 webgli: USE flags unselectable if dynamic_stage3
211 webgli: manual extra packages and save button.
212
213 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIUtility.py:
215 change ping count to 2
216 docs/comparison.html
217 initial commit
218
219 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
220 src/templates/x86ArchitectureTemplate.py:
221 fix map() issue with grub code
222 replace kernel_names and initrd_names loops with one-liners
223
224 27 Nov 2005; Preston Cody <codeman@gentoo.org>
225 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
226 initial gli-dialog support for recommended partitioning layout and clear.
227 failure cleanup now an option for gli-dialog.
228 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
229 added comparison list and updated TODO!
230
231 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
232 src/GLIArchitectureTemplate.py:
233 fix to stage1() debug code
234 fix to stage2() debug code
235
236 26 Nov 2005; Preston Cody <codeman@gentoo.org>
237 some more bootloader code fixes. forgot boot_device != mbr_device.
238
239 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIStorageDevice.py:
241 fix to unallocated space merging when last one is after part 4
242
243 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
244 src/GLIArchitectureTemplate.py:
245 small fix to debugging code in copy_pkg_to_chroot()
246
247 23 Nov 2005; Preston Cody <codeman@gentoo.org>
248 more bugfixes with bootloader code
249 gli-dialog side appears to work
250
251 21 Nov 2005; Preston Cody <codeman@gentoo.org>
252 initial adding of boot_device to backend.
253 initial boot_device support added to gli-dialog.
254 some fixes of my poor coding
255
256 20 Nov 2005; Preston Cody <codeman@gentoo.org>
257 converted gli-dialog to use the install_package_list.
258 gtkfe has already been converted by AllanonJL
259 new way working in gli-dialog now and added to webgli.
260 added set/get_boot_device() to IP
261
262 19 Nov 2005; Preston Cody <codeman@gentoo.org>
263 get_install_package_list added to InstallProfile. This can be used by the FEs
264
265 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
266 src/templates/x86ArchitectureTemplate.py:
267 call ls with '-1 --color=no'
268
269 16 Nov 2005; Preston Cody <codeman@gentoo.org>
270 added warning (#9) to GRP ppl about stage3 tarballs
271
272 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
273 src/GLIArchitectureTemplate.py:
274 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
275 confused
276
277 13 Nov 2005; Preston Cody <codeman@gentoo.org>
278 removed protocols from rc.conf screens
279 finished initial rc.conf and make.conf in webgli
280
281 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
282 src/net/server/gliserv.py:
283 add -h option to usage()
284 show time and request URI in debug mode
285 show client IP in debug mode
286 just use IP instead of trying to do a reverse lookup
287
288 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
289 src/net/server/gliserv.py:
290 'classier' 401 message
291 proper commandline parsing
292 help via -h
293 user/pass can be specificed via commandline option
294
295 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
296 src/net/server/gliserv.py:
297 basic HTTP auth
298
299 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
300 src/net/server/gliserv.py:
301 dynamic module reloading (yipee!)
302 send 'Last-Modified' header for real files
303 respond to HEAD with just headers
304 src/net/server/handlers/WebGLIHandler.py:
305 icons for drives
306
307 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
308 src/net/server/handlers/WebGLIHandler.py:
309 initial 'pretty' partition table display support
310 clicking partition in 'pretty' display works instead of radio buttons
311 radio buttons and pretty display work together
312 META redirect instead of javascript
313 pretty display stretches across entire screen
314 'Recommended layout' and 'Clear drive' functions
315 properly catch exceptions from do_recommended()
316 src/GLIArchitectureTemplate.py:
317 replace preinst, copy, postinst, rm steps with qmerge
318 whoops...that shouldn't have been commented out
319 create image_dir with -p in copy_pkg_to_chroot()
320 more generic of symlink crappiness
321 new copy_pkg_to_chroot() actually works now
322
323 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
324 src/GLIStorageDevice.py:
325 initial generic disk support
326 fixes for add_partition() code
327 src/net/server/handlers/WebGLIHandler.py:
328 added support for creating generic disks
329 add new partition working
330 save and delete partitions
331
332 6 Nov 2005; Preston Cody <codeman@gentoo.org>
333 webgli: Partitioning making progress.
334
335 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
336 src/GLIArchitectureTemplate.py:
337 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
338 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
339 dir) and works around /etc/gconf symlink problem
340
341 5 Nov 2005; Preston Cody <codeman@gentoo.org>
342 webgli: lots of updates. preliminary partitioning. extra packages works.
343
344 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
345 src/net/server/gliserv.py:
346 httpd now supports HTTPS and falls back to HTTP if not available
347 make fallback actually work
348 src/net/server/SecureXMLRPCServer.py:
349 SecureSocketServer is now threaded
350
351 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352 src/net/client/gliclient.py:
353 try to use HTTPS for XMLRPC first and fallback to HTTP
354 pretend mode
355 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
356 HTTPS XMLRPC goodness from samyron
357 pass name of certificate
358
359 31 Oct 2005; Preston Cody <codeman@gentoo.org>
360 wegli: daemons and services screens done.
361
362 30 Oct 2005; Preston Cody <codeman@gentoo.org>
363 webgli: networking and users screens
364 added return_redirect to handler.py
365 loading and saving install/client profiles works for webgli now
366 Review also done
367
368 *GLI-0.2 (27 Oct 2005)
369
370 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
371 src/templates/x86ArchitectureTemplate.py:
372 properly check for bootloader emerge exist status with exitsuccess()
373 log output of grub install command
374 add --batch --no-floppy to grub command
375 grubinstallstring only gets logged if debug is on
376 src/GLIUtility.py:
377 update progress bar to 100% when process finishes
378
379 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
380 src/GLIClientController.py:
381 added debugging code for the interaction between the 2 threads via Event()
382 src/GLIUtility.py:
383 doubled the buffer size in spawn()
384 bump buffer size up to 16384
385 only report progress in 5% increments
386 src/GLIArchitectureTemplate.py:
387 kernelpkgs.txt support code
388 above disabled because it sucks
389 added add_pkg_to_world()
390
391 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIArchitectureTemplate.py:
393 use tar | tar to copy files in copy_pkg_to_chroot()
394 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
395
396 23 Oct 2005; Preston Cody <codeman@gentoo.org>
397 DEBUGGING ADDED TO AT. verbose field added to CConfig.
398
399 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/net/server/gliserv.py:
401 / maps to index.html
402 look for actual files in html/
403 src/net/html:
404 new template
405 src/GLIUtility.py:
406 added parse_vdb_contents()
407 src/GLIArchitectureTemplate.py:
408 added copy_pkg_to_chroot()
409 added debug code to dynamic-stage3
410 switch dynamic-stage3 to new method
411 lots of bug fixes from adding debug code
412
413 22 Oct 2005; Preston Cody <codeman@gentoo.org>
414 webgli initial bootloader support + changed make.conf.
415 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
416
417 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
418 src/GLIUtility.py:
419 horrible tangled mess of code that is tarball unpacking subprogress display
420 add unpack progress to portage snapshot
421 use read() instead of readlines() in spawn()
422 only update progress bar for whole percents
423
424 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
425 src/templates/x86ArchitectureTemplate.py:
426 change call to 'grub' to use GLIUtility.exitsuccess()
427 add definition of 'build_mode' in _configure_lilo()
428 src/misc/updategtkfe, src/misc/updateglid:
429 fix so subshell is called in root shell
430
431 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
432 src/net/server/handlers/WebGLIHandler.py:
433 stage screen launches URI browser in sized window with various properties set
434
435 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
436 src/misc/updategtkfe:
437 updated to actually work
438 remove previous snapshot and extracted dir before downloading
439 src/misc/updateglid:
440 updated to actually work
441 src/templates/x86ArchitectureTemplate.py:
442 fixed bug where grub code was looking for 'root+root+file_name2'
443
444 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
445 src/net/server/handlers/WebGLIHandler.py:
446 URI browser
447 added mirror selection
448 src/GLIUtility.py:
449 ls via ssh strips off ending *
450
451 16 Oct 2005; Preston Cody <codeman@gentoo.org>
452 more updates to webgli. stage selection.
453
454 11 Oct 2005; Preston Cody <codeman@gentoo.org>
455 updated webgli with preliminary Network Mounts support.
456
457 9 Oct 2005; Preston Cody <codeman@gentoo.org>
458 GenDialog: string formatting and yes/no label fixes.
459 added WebGLI template for gliserv.py
460 added WebGLIHandler as well as a definition for it in gliserv.py
461 updates to the webgli files even though they won't be there for long.
462 Utility: remove exception for non-existant grppkgs.txt until the new livecd
463 goes public.
464
465 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
466 src/net/server/gliserv.py:
467 override dict to not be so anal
468 main server now loads separate module to handle requests
469 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
470 split out profile URLs into separate handler function
471 move handlers into subdirectory
472 add Welcome and Clients handlers
473
474 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
475 src/GLIUtility.py:
476 raise exception if password prompt received twice
477
478 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
479 src/GLIUtility.py:
480 removed rot13ify()
481
482 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
483 src/net/server/gliserv.py:
484 allow for param to be passed multiple times in GET
485 no XMLRPC functions return None
486 modify POST request parsing to only create a list if needed
487 fix GET request parsing so the list creation for multiple values works
488 src/net/client/gliclient.py:
489 various typo and type mismatch fixes
490 exit after exception
491
492 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
493 src/net/client/gliclient.py:
494 initial commit
495 pass MAC to XMLRPC functions
496 src/net/server/GLIServerProfile.py:
497 rename GLIClientsProfiles to GLIServerProfile
498
499 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
500 src/net/server/gliserv.py:
501 now handles POST requests
502 move majority of request handling code to common_handler() to reduce code
503 duplication
504 profile loading
505 client reg via XMLRPC goes into SharedInfo()
506 /showclients redesign
507 template fixes
508 allow handler functions to add/change headers
509 save profile
510
511 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
512 src/net/server/GLIClientsProfiles.py:
513 initial commit
514 src/net/server/template.html:
515 initial commit
516 src/net/server/gliserv.py:
517 add template mojo
518
519 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/net/server/gliserv.py:
521 XMLRPC mojo
522
523 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
524 src/GLIArchitectureTemplate.py:
525 add code in _edit_config() to comment line where variable is defined
526 previously
527 insert new line under previous definition of variable if it exists
528 small _edit_config() cleanup
529 src/GLIStorageDevice.py:
530 add clear_partitions() function
531 new sizes for recommended partition layout
532 automatically calculate swap size for recommended layout
533
534 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
535 src/templates/x86ArchitectureTemplate.py:
536 fat16 mojo
537
538 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
539 src/GLIStorageDevice.py:
540 prevent do_recommended() from being run twice
541 rewrite do_recommended() to be more robust
542 src/GLIArchitectureTemplate.py:
543 rework _edit_config() to not write duplicate entries
544
545 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/GLIStorageDevice.py:
547 added do_recommended() function to automatically created 256M/1G/* layout
548
549 17 Sep 2005; Preston Cody <codeman@gentoo.org>
550 src/gli-dialog.py: added set_distcc to the list
551 GenDialog: added set_distcc. untested.
552 IP: added install_distcc flag.
553 AT: added install_distcc function based on the flag. runs after build_kernel
554 changed AT spawn command for distcc for nodeps.
555
556 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
557 src/GLIUtility.py:
558 add rot13ify() function
559
560 16 Sep 2005; Preston Cody <codeman@gentoo.org>
561 src/GenDialog.py
562 added a sentence of text. unchecking support added.
563
564 15 Sep 2005; Preston Cody <codeman@gentoo.org>
565 src/GLIUtility.py
566 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
567 src/GenDialog.py
568 still working on extra_packages. transformed the list to new format.
569 added GRP indication to list. untested.
570 TODO lists updated.
571 src/fe/dialog/gli-dialog.py
572 spelling mistook.
573
574 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
575 src/GLIUtility.py:
576 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
577
578 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/GLIUtility.py:
580 add get_directory_listing_from_uri()
581 add http support to above
582 add ftp support to above
583 add scp support to above
584 src/GLIArchitectureTemplate.py:
585 "0" instead of 0 for key of single-element dict passed to _edit_config()
586
587 5 Sep 2005; Preston Cody <codeman@gentoo.org>
588 value_only -> only_value
589
590 3 Sep 2005; Preston Cody <codeman@gentoo.org>
591 gutted out all of etc_portage structure since it is now all handled by
592 etc_files
593
594 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
595 src/GLIArchitectureTemplate.py:
596 install_packages() sends progress update notifications
597 src/templates/x86ArchitectureTemplate.py:
598 increase sleep to 5s between format tries
599 src/GLIClientController.py:
600 pass 'self' to AT instead of 'self._pretend'
601
602 2 Sep 2005; Preston Cody <codeman@gentoo.org>
603 logger -> logger.log in x86AT
604
605 1 Sep 2005; Preston Cody <codeman@gentoo.org>
606 added set_etc_portage to IP. debugging gli-d's support for it.
607
608 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
609 src/templates/x86ArchitectureTemplate.py:
610 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
611
612 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/GLIArchitectureTemplate.py:
614 add _portage_best_version() function and rework install_packages() to allow
615 for future X of Y tracking
616 Use best_visible instead of best_version
617 tracked down and fixed missing = causing empty install extra packages
618 use = when emerging also
619 quickpkg hokey pokey
620 run _get_packages_to_emerge() again with -pk
621
622 22 Aug 2005; Preston Cody <codeman@gentoo.org>
623 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
624 the end of install_packages.
625 added updateglid to /src/misc
626 updated all core files with new GPL notice and copyright statement.
627
628 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
629 src/GLIUtility.py:
630 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
631 a snapshot in /mnt/cdrom/snapshots/
632 get_snapshot_from_cd() adds file:// at the beginning
633 change calls to extra package special case functions to 'self.blah'
634
635 21 Aug 2005; Preston Cody <codeman@gentoo.org>
636 src/ArchTemplate: changed "voodoo".
637 changed order of portage sync methods. made a fallback to webrsync if
638 normal emerge sync fails.
639 removed get_sources_from_cd because it is obsolete.
640 add special cases to install_packages. remove fatal exception on package
641 install failure b/c the box will still be bootable.
642 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
643 handled in the FEs.
644 src/GenDialog: added a bunch of code for dealing with x11-based packages.
645 awaiting testing.
646
647 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
648 src/GLIStorageDevice.py:
649 global try/except block around fs resizable detection code
650 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
651 install-failed cleanup function
652
653 18 Aug 2005; Preston Cody <codeman@gentoo.org>
654 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
655
656 16 Aug 2005; Preston Cody <codeman@gentoo.org>
657 GLIGenDialog:
658 add drive choices for loaded configs.
659 force snapshot for dynamic_stage3
660 init the snapshoturi input to the cd snapshot if not already selected.
661 if dynamic_stage3, skip the make.conf step.
662 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
663 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
664
665 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
666 src/GLIArchitectureTemplate.py:
667 manually call MAKEDEV in stage3-dynamic code
668 copy /etc/inittab.old to /etc/inittab in chroot
669 src/GLIUtility.py:
670 add beginning of validate_uri() function
671 add file:/// support to validate_uri()
672 single quotes when setting livecd password
673
674 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
675 src/GLIGenDialog.py:
676 change getmountpoint() to get_mountpoint()
677 src/misc/updategtkfe:
678 committed script to automatically download latest snapshot and run gtkfe
679 src/templates/x86ArchitectureTemplate.py:
680 fix _configure_lilo_add_windows() for IP -> GLISD stuff
681 src/GLIArchitectureTemplate.py:
682 give tmp_minor an initial value in mount_local_partitions so that the value
683 remain from the previous drive
684
685 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
686 src/templates/x86ArchitectureTemplate.py:
687 Fix _configure_lilo() for IP using GLISD stuff
688 src/GLIArchitectureTemplate.py:
689 install_cron_daemon() treats "none" specially
690
691 14 Aug 2005; Preston Cody <codeman@gentoo.org>
692 old patch from Steven Mertens to resolve bug #96642
693 numerous asthetic changes to GenDialog, no real functionality changes though.
694 strings renamed for global use if necessary.
695 fix all three parts of bug 102291
696 disable set_etc_portage until fully-written.
697
698 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
699 src/GLIClientController.py:
700 lower-case http/ftp proxy envvars
701
702 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
703 src/GLIClientController.py:
704 log end of pre_install steps to aid in debugging
705 src/templates/x86ArchitectureTemplate.py:
706 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
707
708 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
709 src/GLIArchitectureTemplate.py
710 check to make sure that the device node we're wait for to exist isn't of
711 type 'free'
712
713 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
714 src/GLIGenDialog.py:
715 convert install_packages to list in set_extra_packages()
716 check return code of checklist() call in "Manual" section
717 *actually* fix the first problem
718
719 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
720 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
721 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
722
723 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
724 src/GLIArchitectureTemplate.py:
725 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
726
727 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
728 Add CDATA support to SimpleXMLParser and add utility functions for it.
729
730 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
731 src/GLIArchitectureTemplate.py:
732 Fix case where vixie-cron is specified as a full package atom, as we still
733 don't want to run 'crontab /etc/crontab' for it.
734
735 *GLI-0.1 (3 Aug 2005)
736
737 30 Jul 2005; Preston Cody <codeman@gentoo.org>
738 add scp to list of is_uri() so GenDialog doesn't complain.
739 fixed livecd-kernel bug in bootloader code.
740 fixed gendialog for dynamic_stage3 instead of "networkless"
741 change bootloader to allow for both initrd and initramfs.
742 fix IP for dynamic_stage3.
743 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
744
745 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
746 Added full scp:// URI support to get_uri() in GLIUtility
747 Remove "networkless" from dynamic stage3 if locic.
748 Remove print statement from scp:// code.
749 Change scp code to check for "assword: " instead of "Password:"
750 Fix post-install network code to create net.eth1+ symlink correctly
751 Check to make sure pkg can be split on / and some debugging code
752 Add 2>dev/null to emerge call in _get_packages_to_emerge()
753 SimpleXMLParser handles True/False/None correctly now
754 Comment out above fix
755 Add partitioning wait-for-device-to-exist code to mount_local_partitions
756
757 28 Jul 2005; Scott Myron <samyron@gentoo.org>
758 Removed a FIXME in the GLIClientConfiguration that is no
759 longer needed.
760
761 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
762 Default to x86 in ClientConfig
763 Typo in build-a-stage3 code.
764 Remove MAKEDEV call in build-a-stage3 postscript.
765
766 26 Jul 2005; Preston Cody <codeman@gentoo.org>
767 Rewrote init of IP for gli-d. Other GenDialog updates.
768 allow network_type to be None in CConfig.
769
770 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
771 Add _dynamic_stage3 option to IP.
772 Add check for that option to dynamic stage3 code in ArchTemplate.
773 Fix code to determine default route in get_eth_info() in GLIUtility.
774 Fix serialization of dns-servers in ClientConfig.
775
776 24 Jul 2005; Preston Cody <codeman@gentoo.org>
777 changed default values of cron/logger in IP.
778 moved GenDialog IP init out to the individual files. gli-dialog's version
779 will change quite a bit.
780
781 22 Jul 2005; Preston Cody <codeman@gentoo.org>
782 added ppcArchTemplate. blank now. working on yaboot.
783 modified ArchTemplate for amd64 and ppc custom kernels.
784 skeleton implementation of _configure_yaboot.
785 small fixes to other templates.
786
787 21 Jul 2005; Preston Cody <codeman@gentoo.org>
788 GenDialog updates. changed comment in IP.
789
790 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
791 src/GLIInstallProfile.py:
792 Fix codeman's screwup of changing the service seperator to ',' in the parser
793 without changing it in the serialization code! Also document this in a
794 comment so you find it easier. Everybody needs to make sure they update
795 their install profiles!
796
797 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
798 src/GLIArchitectureTemplate.py:
799 Fix casting of list to string and concat of None with string, as well as
800 commented prototype of checking that mounting actually worked (found a case
801 where mount can return success, but the mount won't be done).
802
803 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
804 src/templates/x86ArchitectureTemplate.py:
805 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
806 checking for the device, and sleeping 1 second each time.
807
808 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
809 src/templates/x86ArchitectureTemplate.py:
810 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
811 bootloader works again. Also rename _install_{grub,lilo} to
812 _configure_{grub,lilo} since they don't install the loaders anymore
813 themselves.
814
815 7 Jul 2005; Preston Cody <codeman@gentoo.org>
816 fix global USE flags to not include the arch types at the end.
817 updates to GenDialog and gli-d.
818
819 6 Jul 2005; Preston Cody <codeman@gentoo.org>
820 fixing bootloader code for no initrd and initrd->initramfs naming change.
821
822 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
823 Proper comments and parameters to GLIException in install_mta()
824 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
825 Add strip() to list_mirrors(), list_subarch_from_mirror() and
826 list_tarball_from_mirror() to eliminate blank last item.
827
828 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
829 Added stage3 generation code.
830
831 5 Jul 2005; Preston Cody <codeman@gentoo.org>
832 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
833 Mild changes to GenDialog.
834
835 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Remove separate install step configure_rc_conf() since it's handled by
837 update_config_files()
838 Make a copy of newvalues in _edit_config() so quotes aren't added when the
839 function is called twice on the same file.
840
841 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
842 Missing \ in sed in _get_packages_to_emerge()
843 Removed explicit emerging of hotplug and no longer add it to the runlevel.
844 Check in _quickpkg_deps() to ignore blank package names returned from
845 _get_packages_to_emerge()
846
847 28 Jun 2005; Preston Cody <codeman@gentoo.org>
848 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
849 in the dialog.py gauge code.
850
851 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
852 Add code to update_config_files() to go through etc_files and update stuff.
853 Check to see that _etc_files['make.conf'] exists in get_make_conf()
854 Only use float() in partition xml parsing code if type == "free"
855
856 28 Jun 2005; Preston Cody <codeman@gentoo.org>
857 finished almost all internationalization of GenDialog.
858 attempt at fixing rc.conf function. moved 3 generate functions out of
859 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
860 added dialog.py to the fe/dialog directory so it actually gets used.
861
862 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
863 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
864
865 27 Jun 2005; Preston Cody <codeman@gentoo.org>
866 fix extra entry in list_mirrors()
867 beginning internationalization runthrough.
868
869 26 Jun 2005; Preston Cody <codeman@gentoo.org>
870 added dialog.py to /src temporarily until it gets accepted upstream.
871 fix for unused value in form in dialog.py and changed heights.
872 fix GenDialog forms.
873
874 25 Jun 2005; Preston Cody <codeman@gentoo.org>
875 Changed hostname/domainname for new baselayout.
876 Changed _add_to_runlevel errors to logs.
877 Updated TODO list to show status of GenDialog
878 More updates to GenDialog including two checklists that probably won't work.
879 update IP to use comma-separated list instead of space separated for services.
880
881 24 Jun 2005; Preston Cody <codeman@gentoo.org>
882 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
883 GenDialog as it gets closer to completion.
884
885 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
886 Modify get_eth_info() to take a full interface name (eth0 fex). float()
887 instead of int() in add_partition_device_partition() for minor (closes 96804)
888
889 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
890 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
891 instead of 'interfaces[interface][1]' since DHCP uses that field for its
892 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
893
894 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
895 Apply spawn() patch from #96644 (with minor changes). Make sure the return
896 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
897 small error with <pipe>.close() returning None. Fix space vs. tab issue.
898 Fix undefined variable 'output' issue in spawn().
899
900 20 Jun 2005; Preston Cody <codeman@gentoo.org>
901 More updates to GenDialog and gli-d.
902
903 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
904 Modify list_mirrors() to return a list of mirror URL/name pairs.
905
906 19 Jun 2005; Preston Cody <codeman@gentoo.org>
907 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
908 get subarch.
909
910 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
911 Backend partitioning will create disklabel is none exists. Installprofile
912 defaults to "" now instead of "msdos" for disklabel type. Fix for
913 mount_local_partitions() to remember device along with minor in the
914 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
915 add else block to log unsupported netmount types to mount_network_shares()
916
917 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
918 src/GLIArchitectureTemplate.py:
919 Refactor kernel_compile common stuff, fix 2.4 build process.
920 src/fe/cli/clife.py:
921 Logging system.
922 src/GLIUtility.py, src/GLIStorageDevice.py:
923 Add comments about re-writes needed for boxes without sysfs.
924
925 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
926 src/GLIArchitectureTemplate.py:
927 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
928 'make dep' call for custom compile. build_mode support for prepare-only and
929 none types completed. custom compile function chains shell functions in
930 spawned script, to allow for catching all errors.
931
932 15 Jun 2005; Preston Cody <codeman@gentoo.org>
933 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
934 and GenDialog. other gendialog updates as well. kernel updates untested.
935
936 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
937 src/GLIInstallProfile.py:
938 Change structure of etc-portage stuff. The serialization was broken before my
939 last commit, and I am the only person that's ever used it. The new schema is
940 as follows:
941 <etc-portage>
942 <file name="package.mask"/>
943 <file name="package.unmask">
944 <entry atom="sys-kernel/openmosix-sources"/>
945 </file>
946 <file name="package.use">
947 <entry atom="sys-libs/db">
948 -java
949 </entry>
950 <entry atom="dev-libs/cyrus-sasl">
951 -ldap
952 </entry>
953 </file>
954 </etc-portage>
955
956
957 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
958 src/GLIInstallProfile.py:
959 Add new entry for gli-profile/kernel-build-method item. Add missing
960 serialize_etc_portage (temporary). Make serialize_make_conf always print the
961 keys in the same order.
962
963 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
964 src/GLIArchitectureTemplate.py:
965 Clean up commenting used by _edit_config(), and fix bug where wrong comment
966 was repeatedly appended to make.conf.
967
968 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
969 src/GLIArchitectureTemplate.py:
970 Put some Linux-2.6 specific code under a if statement. Store list of
971 successfully mounted swap device for using swapoff. Add proper error checking
972 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
973 'file'. Clean up some redundant code (thanks to pychecker).'
974
975 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
976 Fix typos: get_extended() instead of get_extended_partition(). Added
977 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
978 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
979
980 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
981 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
982 in add_network_interface.
983
984 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
985 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
986 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
987 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
988 prepare_chroot.
989
990 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
991 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
992 +src/fe/installer-gtk:
993 Add new automated CLI frontend. Add scripts that are the intended means to
994 use each frontend.
995
996 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
997 src/GLIClientController.py:
998 Add null type to network config, for cases where the interface is already up
999 and should not be touched (netboot for example).
1000
1001 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1002 src/GLIArchitectureTemplate.py:
1003 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1004 string!. Try to use binary packages if available by default.
1005
1006 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1007 src/GLIArchitectureTemplate.py:
1008 More error checking for _add_to_runlevel, to ensure that the init script
1009 actually exists before we try to add it. set_services phase must take place
1010 after the package installation, otherwise the init scripts might not exist.
1011 Find the correct init script for the cron and logging daemons, and add that
1012 instead of the package atom.
1013
1014 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1015 src/GLIArchitectureTemplate.py:
1016 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1017 usage of 'file' to 'contents' for the variable name, as it shadows
1018 __builtin__.file.
1019
1020 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1021 src/GLIArchitectureTemplate.py:
1022 Add MTA install code, and include MTA install phase. Ensure
1023 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1024 for 'none' kernel config for build_kernel phase. Put kernel_script in
1025 /var/tmp instead of /root for build_kernel phase.
1026
1027 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1028 Rename mta variables to match syslog/cron variables.
1029
1030 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1031 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1032 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1033 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1034 src/templates/.cvsignore, src/tests/.cvsignore:
1035 Refactor partition formatting again to include error checking. Allow 'none'
1036 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1037
1038 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1039 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1040 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1041 only have a single spawn call.
1042
1043 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1044 refixed samyron's fix of set_architecture_template.
1045
1046 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1047 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1048 be executable.
1049
1050 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1051 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1052 error checking when you call set_architecture_template.
1053
1054 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1055 moved the mkfsopts input to the partition options menu instead of the during
1056 the creation process. updated GenDialog to say it supports reiserfs v3.
1057
1058 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1059 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1060 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1061 Add support for other partition types to dialogfe.
1062 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1063 avoid integer overflows and wraparounds.
1064
1065 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1066 Removed start/end from XML output and added mkfsopts to partitioning info.
1067 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1068 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1069 in GLIClientConfiguration. Change from .1 and .9 to constants for
1070 partitioning. Fix free space overwriting bug. Remove a few unused functions
1071 from rewrite. Fix call to get_partition_at()
1072
1073 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1074 Updates to GenDialog and dialogfe.
1075
1076 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1077 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1078
1079 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1080 more GenDialog updates to partitioning.
1081
1082 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1083 Indenting issue in GLISD/get_ordered_partition_list.
1084 updates to GenDialog partitioning and added default UTC for timezone in IP.
1085
1086 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1087 Added GLISD.get_model()
1088
1089 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1090 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1091 More updates to GenDialog :)
1092
1093 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1094 Added get_interface_realname() function.
1095
1096 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1097 Added auto-save of CConfig and copying to new /root after install.
1098 yet even more GenDialog updates.
1099
1100 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1101 removed print statement from GLISD. more updates to GenDialog.
1102
1103 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1104 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1105 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1106 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1107 places in GLIClientConfiguration.
1108
1109 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1110 Fix mount_local_partitions(), configure_fstab(), and
1111 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1112 A few more fixes for templates/x86Archtemplate
1113
1114 27 May 2005; Preston Cody <codeman@gentoo.org>
1115 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1116 a work in progress.
1117
1118 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1119 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1120 directly. GLISD can now handle data imported from XML.
1121
1122 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1123 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1124 handle blank (no disklabel) disks.
1125
1126 20 May 2005; Preston Cody <codeman@gentoo.org>
1127 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1128 up, documented, and separated out serialization and grouped all sections.
1129
1130 19 May 2005; Preston Cody <codeman@gentoo.org>
1131 Reorganization of ClientConfiguration and gutting of unused functions.
1132 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1133
1134 18 May 2005; Preston Cody <codeman@gentoo.org>
1135 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1136
1137 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1138 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1139 partitioning. CC serializes install profile to disk and prepare_chroot()
1140 copies it into /mnt/gentoo/root
1141
1142 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1143 Moved URI parsing into new function parse_uri()
1144
1145 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1146 Added XMLParser module.
1147
1148 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1149 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1150 Minor fix to is_uri() regex to allow hyphens in hostname.
1151
1152 12 May 2005; Preston Cody <codeman@gentoo.org>
1153 Updated finishing_cleanup for new unmounting method from agaffney.
1154
1155 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1156 Fix GLILogger to use correct time format string. Fix _edit_config() to
1157 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1158 unicode support to is_realstring().
1159
1160 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1162 return value instead of non-zero. Add code to output a traceback to the
1163 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1164 instead of --nocolor.
1165
1166 10 May 2005; Preston Cody <codeman@gentoo.org>
1167 Added GLIGenDialog.py to make a generic class for the dialog functions that
1168 can be used by both dialogfe and the netfe/be. updated both for new filename.
1169 date changes. 2004->2005.
1170
1171 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 Removed 'quiet=True' from spawn() calls
1173
1174 10 May 2005; Preston Cody <codeman@gentoo.org>
1175 Updated GLIUtility with patches from chotchki. Also added documentation
1176
1177 9 May 2005; Preston Cody <codeman@gentoo.org>
1178 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1179 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1180 from bug #89683, mostly touchups.
1181
1182 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1183 GLIStorageDevice cleanup patch from bug #91761
1184
1185 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1186 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1187 _edit_config(). Error logging casts 'error' to str
1188
1189 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 Exceptions received in CC are logged before being passed to the FE. Added
1191 code to CC to handle exceptions *not* thrown by the installer itself.
1192
1193 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1194 get_max_mb_for_resize() returns -1 if not self.resizeable
1195
1196 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1197 More dirty rsync hacks :-/
1198
1199 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1200 Patches from chotchki (bug #90325) to improve CC networking. untested.
1201
1202 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1203 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1204 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1205 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1206 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1207 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1208 _get_packages_to_emerge()
1209
1210 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1211 Added group-adding code to set_users in ArchTemplate
1212
1213 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Added post-install script code
1215
1216 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1217 Fixed encapsulation issues in GLIClientController (bug #90141)
1218
1219 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1220 Update resizing code in GLIStorageDevice
1221
1222 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1223 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1224
1225 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Reverted change to ArchTemplate and added support for commented line in old
1227 code.
1228
1229 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 Changed _edit_config() to modify value in-place instead of commenting out and
1231 adding the new value to the end of the file.
1232
1233 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1234 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1235 Also updated TODO list.
1236
1237 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Use blackace's one-liner to add comments for all function for use with
1239 pythondoc.
1240
1241 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 Moved 'end >= device_sectors' check out of loop to check for next partition's
1243 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1244 Partitioning code now tracks start/end of extended for placing logicals. End
1245 point of logical is now adjusted along with start.
1246
1247 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1248 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1249 the way of partitioning from a blank disk. Add int() around access to minor
1250 key in partition information due to new partition code leaving them as float.
1251
1252 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1253 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1254
1255 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1256 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1257
1258 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1259 Added support for DHCP options and MAC addresses in the InstallProfile.
1260
1261 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1262 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1263 sed to properly strip out junk.
1264
1265 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1266 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1267 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1268
1269 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1270 Fixed indent problem in GLICController
1271
1272 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1273 Check for disklabel type "loop" and use the device name without a minor.
1274
1275 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1276 Remove /tmp/compile_output.log and /var/log/install.log when install is
1277 complete. Added code to (hopefully) keep 2nd thread running after install.
1278 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1279 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1280 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1281
1282 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1284 when unpacking tarball.
1285
1286 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1287 rewrote filesystem_tools. looks like it works so ripping out all the old
1288 filesystem_tools code.
1289
1290 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1291 Changed the print statements to logging in the partitioning BE code.
1292 the logger may need to be imported to the x86archtemplate. unknown yet.
1293 Added the finishing_cleanup function.
1294 added a fix to the logger from BenUrban
1295
1296 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1297 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1298 URIs. The blank uri check has been commented out.
1299 ripped out error checking of set_services. this is done by _add_to_runlevel.
1300
1301 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1303
1304 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1306 the install profile if available. Commented out spawn() debugging prints
1307
1308 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1309 small changes to setup_network_post. moved adding to runlevel of net.x to
1310 after the device gets symlinked. added domainname runlevel command.
1311
1312 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1313 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1314 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1315 spawn() call in livecd-kernel code to pass environment variables.
1316 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1317 the install profile if available.
1318
1319 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1320 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1321 to handle installing the livecd kernel into the new system.
1322
1323 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1324 should emerge hotplug and coldplug before adding them to runlevel.
1325
1326 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1327 took chroot out of grub_install command.
1328
1329 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1330 Changed chroot wrapper code in spawn() to write the wrapper the python way
1331 instead of the bash way to avoid quote conflicts. Added
1332 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1333 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1334 as it breaks the piping.
1335
1336 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1337 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1338
1339 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1340 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1341 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1342 GLIInstallProfile.
1343
1344 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1345 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1346 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1347 into /mnt/gentoo in prepare_chroot()
1348
1349 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1351 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1352 to start/end sectors
1353
1354 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1355 Add 2>&1 to cmd in spawn()
1356
1357 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Modified GLIUtility.exitsuccess() to work with return value from
1359 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1360 creates wrapper script for commands run inside chroot so multiple commands
1361 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1362 for the generated script from spawn()
1363
1364 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1365 Removed default values for stage tarball URI and portage tree URI from
1366 InstallProfile. These should be set by the FEs. also added services step to
1367 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1368 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1369
1370 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1371 Small fix for setting the default gateway. Also added feature to dialogfe.
1372
1373 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1375
1376 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1377 Fixed a bunch of true -> True typos. lots of em
1378 only write new resolv.conf if there are dns servers listed.
1379
1380 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 Commented out 'display_on_tty8=True' in start_portmap()
1382
1383 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1384 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1385
1386 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1388 lang parameter to __init__()
1389
1390 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1391 updates to TODO list.
1392
1393 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1394 Initial code for quickpkg GRP support. Fix loop to grab packages from
1395 'emerge -p blah'
1396
1397 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1398 check for dhcp in the network stuff and emerge it if it is.
1399 added quickpkg to TODO list
1400
1401 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1402 Changed the raising of 'warning' exceptions to a simple log of the error
1403 so that the installer can continue.
1404
1405 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1406 Some big changes. First, changed most output to display_on_tty8.
1407 Second, added log lines to all templates. Some smaller fixes such as typos.
1408 Also did some cleanups of old commented lines.
1409
1410 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1411 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1412 Undo change with fix. Escaping fix in GLIStorageDevice.py
1413
1414 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1415 more updates to TODO list. hopefully we'll soon start removing items instead
1416 of adding them.
1417
1418 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1419 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1420
1421 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1422 updated TODO list. (again)
1423
1424 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1425 changed output of portmap start to display_on_tty8.
1426 fixed bootloader for udev and multiple kernels
1427 fixed custom kernel config (again)
1428
1429 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1430 changed default value of CC._enable_ssh to True because this is smart.
1431 added code to allow custom kernel .config. may be unstable and break. sorry.
1432
1433 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 partition() now waits until after it checks for partition flags before delete
1435 the partitions :P
1436
1437 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1438 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1439 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1440 blank.
1441
1442 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1443 Various fixes related to the add_users function. Still not yet finished.
1444 Added things to the TODO list. Lets start using that!
1445
1446 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1447 Added code to x86Template to format newly created partitions. Also added
1448 some error checking code. GLIStorageDevice passes 'minor' with data to
1449 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1450 mounting code.
1451
1452 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1453 Took out unnecessary setting of random livecd root password. the cd already
1454 sets it randomly.
1455
1456 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1457 Took out an unneeded step from CC's run()
1458
1459 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1460 Attempt at detecting and adding windows partitions to lilo.
1461
1462 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1463 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1464 partition. fixed misc exit_status => exitstatus typo.
1465
1466 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1467 Added basic code for resizing filesystems with pyparted. Fixed code for
1468 resizing ntfs and ext2/3.
1469
1470 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1471 Fixed partition() in x86Template so that it scans through logicals and deletes
1472 before deleting containing extended partition. Also clears partition table to
1473 be safe before third pass.
1474
1475 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1476 Added mount_network_shares. not able to test it from this computer.
1477 will test when i get back to school.
1478 also added start_portmap to the client_controller as an always-do.
1479 agaffney says this is needed for NFS mounts to work.
1480
1481 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1482 Partial rewrite of partitioning code in x86Template. No longer shells out to
1483 parted to perform actions, now uses all pyparted calls. Code "works" in a
1484 test, but still needs lots of TLC. Also modified tests/install.py to work
1485 with x86Template and GLIClientConfiguration.
1486
1487 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1488 Initial move of partitioning code from ArchTemplate to x86Template.
1489
1490 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1491 Added grp_install and services to InstallProfile. forgot about the set_root_password
1492
1493 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1494 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1495 Test Install ran very well (skipping partitioning).
1496
1497 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1498 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1499 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1500 some may still have eluded me.
1501
1502 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1503 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1504 Just finished mount_local_partitions in GLIArchitectureTemplate
1505
1506 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1507 Added get_num_sectors() to GLIStorageDevice.
1508
1509 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1510 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1511 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1512 from GLIInstallProfile.
1513
1514 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1515 GLIStorageDevice returns "unknown" instead of "" for get_type()
1516
1517 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1518 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1519 actually work. Commented out resizability checking code for speed.
1520
1521 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1522 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1523 GLIStorageDevice at the suggestion of plors
1524
1525 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1526 Added a function to GLIUtility to pull a value from a make.conf-style config
1527 file. Minor type fix to GLIInstallProfile.py
1528
1529 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1530 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1531 network mounts from partition data structure in GLIInstallProfile
1532
1533 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1534 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1535 can be resized.
1536
1537 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1538 Added some of the final functions to GLIInstallTemplate.
1539 Yes this project is still active despite rare use of the Changelog!
1540
1541 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1542 Added the GLIPartitionTools.py file. This is a temporary insertion of
1543 partitioning tools that will eventually go into their own package.
1544
1545 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1546 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1547 for the program). Added __init__(install_profile, client_configuration) to
1548 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1549 to avoid constantly passing stuff every time we call a method.
1550
1551 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1552
1553 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1554 files without messing up all the other stuff in them. This will be used for making
1555 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1556
1557 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1558
1559 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1560 have a few basic things. I added two private methods. One is _depends(). This
1561 will be used for dependency checking (ie. unpacking a tarball requires that
1562 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1563 same syntax as os.system(), however, instead of being run in the liveCD
1564 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1565 isolated the code. Hope to work more this week to get this class formed...
1566
1567 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1568
1569 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1570 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1571 to allow for easier modification (mutable, rather than immutable objects). Updated
1572 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1573 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1574 Added initial unit test code.
1575
1576 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1577
1578 Added initial changelog. Setting up the basic structure of the CVS repository
1579 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1580 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20