/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1302 - (show annotations) (download)
Sun Feb 12 23:13:55 2006 UTC (8 years, 2 months ago) by agaffney
File size: 69029 byte(s)
  src/templates/x86ArchitectureTemplate.py:
  pull old start/end sector values from somewhere that actually has them
  add logic for extended partition to code that makes sure new end sector
  doesn't overlap start sector of next partitions

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.596 2006/02/12 23:13:55 agaffney Exp $
5
6 *GLI-0.3 (12 Feb 2006)
7
8 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
9 src/templates/x86ArchitectureTemplate.py:
10 pull old start/end sector values from somewhere that actually has them
11 add logic for extended partition to code that makes sure new end sector
12 doesn't overlap start sector of next partitions
13
14 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIPortage.py:
16 run env-update at the end of copy_pkg_to_chroot()
17
18 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/templates/x86ArchitectureTemplate.py:
20 I'm a complete fscking dumbass. I recorded the end sector for partitions that
21 weren't being touched, but I never used it when recreating them...the end was
22 calculated from the size in MB instead :/
23
24 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
25 src/GLIArchitectureTemplate.py:
26 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
27 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
28 src/GLIPortage.py:
29 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
30 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
31 'resized' flag
32
33 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIPortage.py:
35 short circuit and check vdb directly if package begins with '='
36
37 8 Feb 2006; Preston Cody <codeman@gentoo.org>
38 added more packages to extra_packages list in IP
39
40 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
41 src/templates/x86ArchitectureTemplate.py:
42 10 tries to create filesystem instead of 3
43 src/GLIPortage, src/GLIArchitectureTemplate.py:
44 ignore_missing flag for copy_pkg_to_chroot()
45
46 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47 src/GLIPortage.py:
48 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
49
50 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
51 src/net/server/gliserv.py:
52 fix handling of 404 for real files
53 src/net/server/GLIServerProfile.py:
54 look for 'hostname' in attributes instead of 'name'
55
56 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
57 src/SimpleXMLParser.py:
58 initial support for 'include' in XML files
59 src/GLIStorageDevice.py:
60 initial support for %
61 src/GLIClientController.py:
62 add debugging statements to pre-install steps
63
64 15 Jan 2006; Preston Cody <codeman@gentoo.org>
65 webgli/configfiles:
66 check for key in etc_files['rc.conf'] to fix key error
67 webgli/timezone: small fix.
68 webgli/extrapackages: list-type fix
69 webgli/services: same
70 glimd: add/edit_client updates.
71
72 12 Jan 2006; Preston Cody <codeman@gentoo.org>
73 added configure.pyhtml to glimd. minor changes
74 to top and add_client. fixed up showargs.
75 added execute.pyhtml
76 changed register clients line in gliserv for name->hostname.
77 updated TODO.
78
79 10 Jan 2006; Preston Cody <codeman@gentoo.org>
80 src/net/server/*:
81 added add/del/edit client/profile.pythml for glimd.
82 updated templates, showclients, and gliserv.
83
84 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
85 src/net/server/*:
86 stupid threading module...
87
88 8 Jan 2006; Preston Cody <codeman@gentoo.org>
89 AT: rc.conf -> conf.d/clock
90
91 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
92 src/GLIPortage.py:
93 show 'Calculating dependencies for ...' in subprogress bar at beginning of
94 emerge()
95 src/GLIArchitectureTemplate.py:
96 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
97 in the chroot
98 remove _quickpkg_deps() and _portage_best_{visible,version}()
99 src/GLIUtility.py:
100 fail immediately in validate_uri() if provided URI can't be parsed
101 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
102 debug code in spawn()
103 use lower-level os.read() instead of file.read() because python sucks
104 src/templates/x86ArchitectureTemplate.py:
105 basic subprogress reporting for partitioning
106 total_steps was 1 too high
107
108 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
109 src/GLIUtility.py:
110 move parse_vdb_contents() to GLIPortage
111 src/GLIPortage.py:
112 remove all symlink fixups
113 ignore 'dir' entries in CONTENTS
114 call tar with -p
115
116 5 Jan 2006; Preston Cody <codeman@gentoo.org>
117 AT: bootsplash is now gensplash
118 gliserv: add advanced_mode to shared_info
119 webgli: Added advanced mode. mostly just disables a few screens.
120
121 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
122 src/GLIPortage.py:
123 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
124 added emerge()
125 update sub-progress after each package is emerged
126 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
127 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
128 remove link if it exists before moving content into place
129 src/GLIArchitectureTemplate.py:
130 install_packages() now calls emerge() in GLIPortage
131 change all calls to self._emerge() to self._portage.emerge()
132 comment out all emerge status checking...using exceptions now
133 call copy_pkg_to_chroot() directly for livecd-kernel
134
135 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
136 src/GLIArchitectureTemplate.py:
137 remove add_pkg_to_world() and copy_pkg_to_chroot()
138 copy installer.log to installer.log.failed on install failure
139 src/GLIUtility.py:
140 added get_keymaps()
141 spawn() takes any False argument for chroot instead of just None
142 src/GLIPortage.py:
143 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
144 change copy_pkg_to_chroot() to work properly with use_root=False
145 figure PORTAGE_TMPDIR properly
146
147 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
148 src/net/server/html/*:
149 converted showclients, load/saveprofile
150
151 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIPortage.py:
153 exclude packages already in chroot vdb from binary deplist
154 chroot to use best_version for chroot's vdb
155 src/runtimedeps.py:
156 accept ROOT via commandline instead of env
157
158 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
159 src/runtimedeps.py:
160 remove passing of ROOT
161 src/GLIPortage.py:
162 modify get_deps() to get deptree for each package and merge into final list
163 remove depgraph class
164 add debugging code to get_deps()
165 src/GLIArchitectureTemplate.py:
166 combine code for GRP/compile in install_packages() into one block
167 debugging code in install_packages()
168
169 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
170 src/runtimedeps.py:
171 initial commit
172 src/GLIPortage.py:
173 use separate script for GRP deps
174 remove calls to portage module
175
176 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
177 src/GLIPortage.py:
178 initial commit
179 move some of portage function from GLIAT
180 flipped around a few function args
181 src/GLIArchitectureTemplate.py:
182 revamp install_packages() for new GLIPortage
183
184 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
185 src/GLIArchitectureTemplate.py:
186 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
187
188 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
189 src/net/server/gliserv.py:
190 wrap generated code in a class to isolate it a bit better
191 302 redirects work
192 don't use cgi.escape() for <% %>
193 src/net/server/html/webgli/*:
194 load/save profile
195 src/GLIUtility.py:
196 change /sbin/lspci to just lspci
197
198 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
199 src/GLIClientController.py:
200 change ordering of statements in CC run() while loop to not go past the end
201 of the array
202 src/GLIArchitectureTemplate.py:
203 removed redundant bind mounts
204
205 18 Dec 2005; Preston Cody <codeman@gentoo.org>
206 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
207 added a diagram by blackace from last night.
208 added the glossary in RTF format.
209
210 17 Dec 2005; Preston Cody <codeman@gentoo.org>
211 x86AT: separated out emerge/configure from running of bootloader
212 added MBR drive support to lilo.
213 these changes will likely not work.
214 AT: added setup_and_run_bootloader step.
215
216 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
217 src/net/server/gliserv.py:
218 call generated code in a function
219 src/net/server/html/webgli/*:
220 include top/bottom
221 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
222 src/GLIClientCongifuration.py:
223 install mode magic
224
225 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
226 src/GLIClientController.py:
227 use GLIException when there's an import problem
228 added debug code to show install_steps
229 src/templates/amd64ArchitectureTemplate.py:
230 add . to import path
231 proper path this time: ../../templates
232 src/GLIArchitectureTemplate.py:
233 add _portage_best_version() function
234
235 11 Dec 2005; Preston Cody <codeman@gentoo.org>
236 added initial glossary and gimli diagram to the docs directory.
237 modify gli-dialog to allow editing of the install_profile after loading XML.
238
239 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
240 src/net/server/html/webgli/:
241 converted globaluse, localuse, networkmounts, portagetree, and stageselection
242 moved saveclientconfig stuff into clientconfig
243 moved saveconfigfiles into config files
244 converted etc_portage and makedotconf
245 converted bootloader and kernel
246 convert daemons, extrapackages, networking, review, services, timezone, users
247 src/net/server/gliserv.py:
248 proper 404 handling for .pyhtml extension
249 HTML escape <% %> stuff
250 work around python's sucky regexes
251 src/GLIInstallProfile.py:
252 allow set_{rsync,ftp,http}_proxy() to accept empty values
253
254 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/net/server/gliserv.py:
256 initial commit of Legolas templating engine
257 302 redirects
258 src/net/server/html/index.html, src/net/server/webgli_template.html:
259 minor changes for new code
260 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
261 initial commit of the conversion from the monolithic WebGLIHandler.py to the
262 one file per path Legolas goodness
263 partitioning[2-4] done
264
265 5 Dec 2005; Preston Cody <codeman@gentoo.org>
266 webgli: dhcp options in CC and post-install.
267 updated comparison chart.
268 webgli: etc/portage/* and distcc support added. not too-well tested.
269
270 4 Dec 2005; Preston Cody <codeman@gentoo.org>
271 webgli_template.html: valign=top on left side.
272 webgli: fix bootloader boot_device. now working.
273 webgli: CC proxy done. post-install proxy in progress.
274
275 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
276 src/net/server/webgli_template.html:
277 increase padding for content cell to 7px and add colspan=2
278
279 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
280 webgli: added graphic bar on top
281 webgli: added hover effects on the links on the left
282 webgli: re-rendered header_bg.png to stretch without artifacts
283
284 3 Dec 2005; Preston Cody <codeman@gentoo.org>
285 webgli: make.conf disabling fixes for dynamic_stage3
286 fixed portage snapshot browse popup
287 all changes tested.
288 webgli: add debug mode to CC screen. the screen still needs lots of work.
289
290 1 Dec 2005; Preston Cody <codeman@gentoo.org>
291 added debug mode question to gli-dialog
292 added CC proxies to CC networking for gli-dialog
293 webgli: fixed skip CC networking if connection active
294 webgli: portage snapshot defaults to CD
295 webgli: bootloader mbr drive selection
296 webgli: USE flags unselectable if dynamic_stage3
297 webgli: manual extra packages and save button.
298
299 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
300 src/GLIUtility.py:
301 change ping count to 2
302 docs/comparison.html
303 initial commit
304
305 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
306 src/templates/x86ArchitectureTemplate.py:
307 fix map() issue with grub code
308 replace kernel_names and initrd_names loops with one-liners
309
310 27 Nov 2005; Preston Cody <codeman@gentoo.org>
311 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
312 initial gli-dialog support for recommended partitioning layout and clear.
313 failure cleanup now an option for gli-dialog.
314 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
315 added comparison list and updated TODO!
316
317 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
318 src/GLIArchitectureTemplate.py:
319 fix to stage1() debug code
320 fix to stage2() debug code
321
322 26 Nov 2005; Preston Cody <codeman@gentoo.org>
323 some more bootloader code fixes. forgot boot_device != mbr_device.
324
325 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
326 src/GLIStorageDevice.py:
327 fix to unallocated space merging when last one is after part 4
328
329 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
330 src/GLIArchitectureTemplate.py:
331 small fix to debugging code in copy_pkg_to_chroot()
332
333 23 Nov 2005; Preston Cody <codeman@gentoo.org>
334 more bugfixes with bootloader code
335 gli-dialog side appears to work
336
337 21 Nov 2005; Preston Cody <codeman@gentoo.org>
338 initial adding of boot_device to backend.
339 initial boot_device support added to gli-dialog.
340 some fixes of my poor coding
341
342 20 Nov 2005; Preston Cody <codeman@gentoo.org>
343 converted gli-dialog to use the install_package_list.
344 gtkfe has already been converted by AllanonJL
345 new way working in gli-dialog now and added to webgli.
346 added set/get_boot_device() to IP
347
348 19 Nov 2005; Preston Cody <codeman@gentoo.org>
349 get_install_package_list added to InstallProfile. This can be used by the FEs
350
351 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352 src/templates/x86ArchitectureTemplate.py:
353 call ls with '-1 --color=no'
354
355 16 Nov 2005; Preston Cody <codeman@gentoo.org>
356 added warning (#9) to GRP ppl about stage3 tarballs
357
358 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
359 src/GLIArchitectureTemplate.py:
360 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
361 confused
362
363 13 Nov 2005; Preston Cody <codeman@gentoo.org>
364 removed protocols from rc.conf screens
365 finished initial rc.conf and make.conf in webgli
366
367 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368 src/net/server/gliserv.py:
369 add -h option to usage()
370 show time and request URI in debug mode
371 show client IP in debug mode
372 just use IP instead of trying to do a reverse lookup
373
374 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
375 src/net/server/gliserv.py:
376 'classier' 401 message
377 proper commandline parsing
378 help via -h
379 user/pass can be specificed via commandline option
380
381 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
382 src/net/server/gliserv.py:
383 basic HTTP auth
384
385 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
386 src/net/server/gliserv.py:
387 dynamic module reloading (yipee!)
388 send 'Last-Modified' header for real files
389 respond to HEAD with just headers
390 src/net/server/handlers/WebGLIHandler.py:
391 icons for drives
392
393 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
394 src/net/server/handlers/WebGLIHandler.py:
395 initial 'pretty' partition table display support
396 clicking partition in 'pretty' display works instead of radio buttons
397 radio buttons and pretty display work together
398 META redirect instead of javascript
399 pretty display stretches across entire screen
400 'Recommended layout' and 'Clear drive' functions
401 properly catch exceptions from do_recommended()
402 src/GLIArchitectureTemplate.py:
403 replace preinst, copy, postinst, rm steps with qmerge
404 whoops...that shouldn't have been commented out
405 create image_dir with -p in copy_pkg_to_chroot()
406 more generic of symlink crappiness
407 new copy_pkg_to_chroot() actually works now
408
409 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/GLIStorageDevice.py:
411 initial generic disk support
412 fixes for add_partition() code
413 src/net/server/handlers/WebGLIHandler.py:
414 added support for creating generic disks
415 add new partition working
416 save and delete partitions
417
418 6 Nov 2005; Preston Cody <codeman@gentoo.org>
419 webgli: Partitioning making progress.
420
421 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/GLIArchitectureTemplate.py:
423 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
424 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
425 dir) and works around /etc/gconf symlink problem
426
427 5 Nov 2005; Preston Cody <codeman@gentoo.org>
428 webgli: lots of updates. preliminary partitioning. extra packages works.
429
430 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
431 src/net/server/gliserv.py:
432 httpd now supports HTTPS and falls back to HTTP if not available
433 make fallback actually work
434 src/net/server/SecureXMLRPCServer.py:
435 SecureSocketServer is now threaded
436
437 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
438 src/net/client/gliclient.py:
439 try to use HTTPS for XMLRPC first and fallback to HTTP
440 pretend mode
441 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
442 HTTPS XMLRPC goodness from samyron
443 pass name of certificate
444
445 31 Oct 2005; Preston Cody <codeman@gentoo.org>
446 wegli: daemons and services screens done.
447
448 30 Oct 2005; Preston Cody <codeman@gentoo.org>
449 webgli: networking and users screens
450 added return_redirect to handler.py
451 loading and saving install/client profiles works for webgli now
452 Review also done
453
454 *GLI-0.2 (27 Oct 2005)
455
456 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
457 src/templates/x86ArchitectureTemplate.py:
458 properly check for bootloader emerge exist status with exitsuccess()
459 log output of grub install command
460 add --batch --no-floppy to grub command
461 grubinstallstring only gets logged if debug is on
462 src/GLIUtility.py:
463 update progress bar to 100% when process finishes
464
465 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
466 src/GLIClientController.py:
467 added debugging code for the interaction between the 2 threads via Event()
468 src/GLIUtility.py:
469 doubled the buffer size in spawn()
470 bump buffer size up to 16384
471 only report progress in 5% increments
472 src/GLIArchitectureTemplate.py:
473 kernelpkgs.txt support code
474 above disabled because it sucks
475 added add_pkg_to_world()
476
477 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
478 src/GLIArchitectureTemplate.py:
479 use tar | tar to copy files in copy_pkg_to_chroot()
480 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
481
482 23 Oct 2005; Preston Cody <codeman@gentoo.org>
483 DEBUGGING ADDED TO AT. verbose field added to CConfig.
484
485 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
486 src/net/server/gliserv.py:
487 / maps to index.html
488 look for actual files in html/
489 src/net/html:
490 new template
491 src/GLIUtility.py:
492 added parse_vdb_contents()
493 src/GLIArchitectureTemplate.py:
494 added copy_pkg_to_chroot()
495 added debug code to dynamic-stage3
496 switch dynamic-stage3 to new method
497 lots of bug fixes from adding debug code
498
499 22 Oct 2005; Preston Cody <codeman@gentoo.org>
500 webgli initial bootloader support + changed make.conf.
501 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
502
503 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
504 src/GLIUtility.py:
505 horrible tangled mess of code that is tarball unpacking subprogress display
506 add unpack progress to portage snapshot
507 use read() instead of readlines() in spawn()
508 only update progress bar for whole percents
509
510 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
511 src/templates/x86ArchitectureTemplate.py:
512 change call to 'grub' to use GLIUtility.exitsuccess()
513 add definition of 'build_mode' in _configure_lilo()
514 src/misc/updategtkfe, src/misc/updateglid:
515 fix so subshell is called in root shell
516
517 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
518 src/net/server/handlers/WebGLIHandler.py:
519 stage screen launches URI browser in sized window with various properties set
520
521 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
522 src/misc/updategtkfe:
523 updated to actually work
524 remove previous snapshot and extracted dir before downloading
525 src/misc/updateglid:
526 updated to actually work
527 src/templates/x86ArchitectureTemplate.py:
528 fixed bug where grub code was looking for 'root+root+file_name2'
529
530 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
531 src/net/server/handlers/WebGLIHandler.py:
532 URI browser
533 added mirror selection
534 src/GLIUtility.py:
535 ls via ssh strips off ending *
536
537 16 Oct 2005; Preston Cody <codeman@gentoo.org>
538 more updates to webgli. stage selection.
539
540 11 Oct 2005; Preston Cody <codeman@gentoo.org>
541 updated webgli with preliminary Network Mounts support.
542
543 9 Oct 2005; Preston Cody <codeman@gentoo.org>
544 GenDialog: string formatting and yes/no label fixes.
545 added WebGLI template for gliserv.py
546 added WebGLIHandler as well as a definition for it in gliserv.py
547 updates to the webgli files even though they won't be there for long.
548 Utility: remove exception for non-existant grppkgs.txt until the new livecd
549 goes public.
550
551 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
552 src/net/server/gliserv.py:
553 override dict to not be so anal
554 main server now loads separate module to handle requests
555 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
556 split out profile URLs into separate handler function
557 move handlers into subdirectory
558 add Welcome and Clients handlers
559
560 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
561 src/GLIUtility.py:
562 raise exception if password prompt received twice
563
564 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
565 src/GLIUtility.py:
566 removed rot13ify()
567
568 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
569 src/net/server/gliserv.py:
570 allow for param to be passed multiple times in GET
571 no XMLRPC functions return None
572 modify POST request parsing to only create a list if needed
573 fix GET request parsing so the list creation for multiple values works
574 src/net/client/gliclient.py:
575 various typo and type mismatch fixes
576 exit after exception
577
578 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/net/client/gliclient.py:
580 initial commit
581 pass MAC to XMLRPC functions
582 src/net/server/GLIServerProfile.py:
583 rename GLIClientsProfiles to GLIServerProfile
584
585 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
586 src/net/server/gliserv.py:
587 now handles POST requests
588 move majority of request handling code to common_handler() to reduce code
589 duplication
590 profile loading
591 client reg via XMLRPC goes into SharedInfo()
592 /showclients redesign
593 template fixes
594 allow handler functions to add/change headers
595 save profile
596
597 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
598 src/net/server/GLIClientsProfiles.py:
599 initial commit
600 src/net/server/template.html:
601 initial commit
602 src/net/server/gliserv.py:
603 add template mojo
604
605 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
606 src/net/server/gliserv.py:
607 XMLRPC mojo
608
609 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
610 src/GLIArchitectureTemplate.py:
611 add code in _edit_config() to comment line where variable is defined
612 previously
613 insert new line under previous definition of variable if it exists
614 small _edit_config() cleanup
615 src/GLIStorageDevice.py:
616 add clear_partitions() function
617 new sizes for recommended partition layout
618 automatically calculate swap size for recommended layout
619
620 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
621 src/templates/x86ArchitectureTemplate.py:
622 fat16 mojo
623
624 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
625 src/GLIStorageDevice.py:
626 prevent do_recommended() from being run twice
627 rewrite do_recommended() to be more robust
628 src/GLIArchitectureTemplate.py:
629 rework _edit_config() to not write duplicate entries
630
631 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
632 src/GLIStorageDevice.py:
633 added do_recommended() function to automatically created 256M/1G/* layout
634
635 17 Sep 2005; Preston Cody <codeman@gentoo.org>
636 src/gli-dialog.py: added set_distcc to the list
637 GenDialog: added set_distcc. untested.
638 IP: added install_distcc flag.
639 AT: added install_distcc function based on the flag. runs after build_kernel
640 changed AT spawn command for distcc for nodeps.
641
642 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
643 src/GLIUtility.py:
644 add rot13ify() function
645
646 16 Sep 2005; Preston Cody <codeman@gentoo.org>
647 src/GenDialog.py
648 added a sentence of text. unchecking support added.
649
650 15 Sep 2005; Preston Cody <codeman@gentoo.org>
651 src/GLIUtility.py
652 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
653 src/GenDialog.py
654 still working on extra_packages. transformed the list to new format.
655 added GRP indication to list. untested.
656 TODO lists updated.
657 src/fe/dialog/gli-dialog.py
658 spelling mistook.
659
660 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
661 src/GLIUtility.py:
662 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
663
664 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
665 src/GLIUtility.py:
666 add get_directory_listing_from_uri()
667 add http support to above
668 add ftp support to above
669 add scp support to above
670 src/GLIArchitectureTemplate.py:
671 "0" instead of 0 for key of single-element dict passed to _edit_config()
672
673 5 Sep 2005; Preston Cody <codeman@gentoo.org>
674 value_only -> only_value
675
676 3 Sep 2005; Preston Cody <codeman@gentoo.org>
677 gutted out all of etc_portage structure since it is now all handled by
678 etc_files
679
680 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
681 src/GLIArchitectureTemplate.py:
682 install_packages() sends progress update notifications
683 src/templates/x86ArchitectureTemplate.py:
684 increase sleep to 5s between format tries
685 src/GLIClientController.py:
686 pass 'self' to AT instead of 'self._pretend'
687
688 2 Sep 2005; Preston Cody <codeman@gentoo.org>
689 logger -> logger.log in x86AT
690
691 1 Sep 2005; Preston Cody <codeman@gentoo.org>
692 added set_etc_portage to IP. debugging gli-d's support for it.
693
694 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
695 src/templates/x86ArchitectureTemplate.py:
696 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
697
698 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
699 src/GLIArchitectureTemplate.py:
700 add _portage_best_version() function and rework install_packages() to allow
701 for future X of Y tracking
702 Use best_visible instead of best_version
703 tracked down and fixed missing = causing empty install extra packages
704 use = when emerging also
705 quickpkg hokey pokey
706 run _get_packages_to_emerge() again with -pk
707
708 22 Aug 2005; Preston Cody <codeman@gentoo.org>
709 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
710 the end of install_packages.
711 added updateglid to /src/misc
712 updated all core files with new GPL notice and copyright statement.
713
714 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
715 src/GLIUtility.py:
716 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
717 a snapshot in /mnt/cdrom/snapshots/
718 get_snapshot_from_cd() adds file:// at the beginning
719 change calls to extra package special case functions to 'self.blah'
720
721 21 Aug 2005; Preston Cody <codeman@gentoo.org>
722 src/ArchTemplate: changed "voodoo".
723 changed order of portage sync methods. made a fallback to webrsync if
724 normal emerge sync fails.
725 removed get_sources_from_cd because it is obsolete.
726 add special cases to install_packages. remove fatal exception on package
727 install failure b/c the box will still be bootable.
728 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
729 handled in the FEs.
730 src/GenDialog: added a bunch of code for dealing with x11-based packages.
731 awaiting testing.
732
733 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
734 src/GLIStorageDevice.py:
735 global try/except block around fs resizable detection code
736 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
737 install-failed cleanup function
738
739 18 Aug 2005; Preston Cody <codeman@gentoo.org>
740 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
741
742 16 Aug 2005; Preston Cody <codeman@gentoo.org>
743 GLIGenDialog:
744 add drive choices for loaded configs.
745 force snapshot for dynamic_stage3
746 init the snapshoturi input to the cd snapshot if not already selected.
747 if dynamic_stage3, skip the make.conf step.
748 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
749 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
750
751 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
752 src/GLIArchitectureTemplate.py:
753 manually call MAKEDEV in stage3-dynamic code
754 copy /etc/inittab.old to /etc/inittab in chroot
755 src/GLIUtility.py:
756 add beginning of validate_uri() function
757 add file:/// support to validate_uri()
758 single quotes when setting livecd password
759
760 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761 src/GLIGenDialog.py:
762 change getmountpoint() to get_mountpoint()
763 src/misc/updategtkfe:
764 committed script to automatically download latest snapshot and run gtkfe
765 src/templates/x86ArchitectureTemplate.py:
766 fix _configure_lilo_add_windows() for IP -> GLISD stuff
767 src/GLIArchitectureTemplate.py:
768 give tmp_minor an initial value in mount_local_partitions so that the value
769 remain from the previous drive
770
771 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
772 src/templates/x86ArchitectureTemplate.py:
773 Fix _configure_lilo() for IP using GLISD stuff
774 src/GLIArchitectureTemplate.py:
775 install_cron_daemon() treats "none" specially
776
777 14 Aug 2005; Preston Cody <codeman@gentoo.org>
778 old patch from Steven Mertens to resolve bug #96642
779 numerous asthetic changes to GenDialog, no real functionality changes though.
780 strings renamed for global use if necessary.
781 fix all three parts of bug 102291
782 disable set_etc_portage until fully-written.
783
784 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
785 src/GLIClientController.py:
786 lower-case http/ftp proxy envvars
787
788 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
789 src/GLIClientController.py:
790 log end of pre_install steps to aid in debugging
791 src/templates/x86ArchitectureTemplate.py:
792 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
793
794 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
795 src/GLIArchitectureTemplate.py
796 check to make sure that the device node we're wait for to exist isn't of
797 type 'free'
798
799 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
800 src/GLIGenDialog.py:
801 convert install_packages to list in set_extra_packages()
802 check return code of checklist() call in "Manual" section
803 *actually* fix the first problem
804
805 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
806 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
807 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
808
809 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
810 src/GLIArchitectureTemplate.py:
811 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
812
813 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
814 Add CDATA support to SimpleXMLParser and add utility functions for it.
815
816 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
817 src/GLIArchitectureTemplate.py:
818 Fix case where vixie-cron is specified as a full package atom, as we still
819 don't want to run 'crontab /etc/crontab' for it.
820
821 *GLI-0.1 (3 Aug 2005)
822
823 30 Jul 2005; Preston Cody <codeman@gentoo.org>
824 add scp to list of is_uri() so GenDialog doesn't complain.
825 fixed livecd-kernel bug in bootloader code.
826 fixed gendialog for dynamic_stage3 instead of "networkless"
827 change bootloader to allow for both initrd and initramfs.
828 fix IP for dynamic_stage3.
829 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
830
831 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
832 Added full scp:// URI support to get_uri() in GLIUtility
833 Remove "networkless" from dynamic stage3 if locic.
834 Remove print statement from scp:// code.
835 Change scp code to check for "assword: " instead of "Password:"
836 Fix post-install network code to create net.eth1+ symlink correctly
837 Check to make sure pkg can be split on / and some debugging code
838 Add 2>dev/null to emerge call in _get_packages_to_emerge()
839 SimpleXMLParser handles True/False/None correctly now
840 Comment out above fix
841 Add partitioning wait-for-device-to-exist code to mount_local_partitions
842
843 28 Jul 2005; Scott Myron <samyron@gentoo.org>
844 Removed a FIXME in the GLIClientConfiguration that is no
845 longer needed.
846
847 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
848 Default to x86 in ClientConfig
849 Typo in build-a-stage3 code.
850 Remove MAKEDEV call in build-a-stage3 postscript.
851
852 26 Jul 2005; Preston Cody <codeman@gentoo.org>
853 Rewrote init of IP for gli-d. Other GenDialog updates.
854 allow network_type to be None in CConfig.
855
856 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
857 Add _dynamic_stage3 option to IP.
858 Add check for that option to dynamic stage3 code in ArchTemplate.
859 Fix code to determine default route in get_eth_info() in GLIUtility.
860 Fix serialization of dns-servers in ClientConfig.
861
862 24 Jul 2005; Preston Cody <codeman@gentoo.org>
863 changed default values of cron/logger in IP.
864 moved GenDialog IP init out to the individual files. gli-dialog's version
865 will change quite a bit.
866
867 22 Jul 2005; Preston Cody <codeman@gentoo.org>
868 added ppcArchTemplate. blank now. working on yaboot.
869 modified ArchTemplate for amd64 and ppc custom kernels.
870 skeleton implementation of _configure_yaboot.
871 small fixes to other templates.
872
873 21 Jul 2005; Preston Cody <codeman@gentoo.org>
874 GenDialog updates. changed comment in IP.
875
876 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
877 src/GLIInstallProfile.py:
878 Fix codeman's screwup of changing the service seperator to ',' in the parser
879 without changing it in the serialization code! Also document this in a
880 comment so you find it easier. Everybody needs to make sure they update
881 their install profiles!
882
883 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
884 src/GLIArchitectureTemplate.py:
885 Fix casting of list to string and concat of None with string, as well as
886 commented prototype of checking that mounting actually worked (found a case
887 where mount can return success, but the mount won't be done).
888
889 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
890 src/templates/x86ArchitectureTemplate.py:
891 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
892 checking for the device, and sleeping 1 second each time.
893
894 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
895 src/templates/x86ArchitectureTemplate.py:
896 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
897 bootloader works again. Also rename _install_{grub,lilo} to
898 _configure_{grub,lilo} since they don't install the loaders anymore
899 themselves.
900
901 7 Jul 2005; Preston Cody <codeman@gentoo.org>
902 fix global USE flags to not include the arch types at the end.
903 updates to GenDialog and gli-d.
904
905 6 Jul 2005; Preston Cody <codeman@gentoo.org>
906 fixing bootloader code for no initrd and initrd->initramfs naming change.
907
908 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
909 Proper comments and parameters to GLIException in install_mta()
910 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
911 Add strip() to list_mirrors(), list_subarch_from_mirror() and
912 list_tarball_from_mirror() to eliminate blank last item.
913
914 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
915 Added stage3 generation code.
916
917 5 Jul 2005; Preston Cody <codeman@gentoo.org>
918 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
919 Mild changes to GenDialog.
920
921 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
922 Remove separate install step configure_rc_conf() since it's handled by
923 update_config_files()
924 Make a copy of newvalues in _edit_config() so quotes aren't added when the
925 function is called twice on the same file.
926
927 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
928 Missing \ in sed in _get_packages_to_emerge()
929 Removed explicit emerging of hotplug and no longer add it to the runlevel.
930 Check in _quickpkg_deps() to ignore blank package names returned from
931 _get_packages_to_emerge()
932
933 28 Jun 2005; Preston Cody <codeman@gentoo.org>
934 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
935 in the dialog.py gauge code.
936
937 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
938 Add code to update_config_files() to go through etc_files and update stuff.
939 Check to see that _etc_files['make.conf'] exists in get_make_conf()
940 Only use float() in partition xml parsing code if type == "free"
941
942 28 Jun 2005; Preston Cody <codeman@gentoo.org>
943 finished almost all internationalization of GenDialog.
944 attempt at fixing rc.conf function. moved 3 generate functions out of
945 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
946 added dialog.py to the fe/dialog directory so it actually gets used.
947
948 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
949 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
950
951 27 Jun 2005; Preston Cody <codeman@gentoo.org>
952 fix extra entry in list_mirrors()
953 beginning internationalization runthrough.
954
955 26 Jun 2005; Preston Cody <codeman@gentoo.org>
956 added dialog.py to /src temporarily until it gets accepted upstream.
957 fix for unused value in form in dialog.py and changed heights.
958 fix GenDialog forms.
959
960 25 Jun 2005; Preston Cody <codeman@gentoo.org>
961 Changed hostname/domainname for new baselayout.
962 Changed _add_to_runlevel errors to logs.
963 Updated TODO list to show status of GenDialog
964 More updates to GenDialog including two checklists that probably won't work.
965 update IP to use comma-separated list instead of space separated for services.
966
967 24 Jun 2005; Preston Cody <codeman@gentoo.org>
968 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
969 GenDialog as it gets closer to completion.
970
971 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
972 Modify get_eth_info() to take a full interface name (eth0 fex). float()
973 instead of int() in add_partition_device_partition() for minor (closes 96804)
974
975 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
976 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
977 instead of 'interfaces[interface][1]' since DHCP uses that field for its
978 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
979
980 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
981 Apply spawn() patch from #96644 (with minor changes). Make sure the return
982 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
983 small error with <pipe>.close() returning None. Fix space vs. tab issue.
984 Fix undefined variable 'output' issue in spawn().
985
986 20 Jun 2005; Preston Cody <codeman@gentoo.org>
987 More updates to GenDialog and gli-d.
988
989 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990 Modify list_mirrors() to return a list of mirror URL/name pairs.
991
992 19 Jun 2005; Preston Cody <codeman@gentoo.org>
993 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
994 get subarch.
995
996 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Backend partitioning will create disklabel is none exists. Installprofile
998 defaults to "" now instead of "msdos" for disklabel type. Fix for
999 mount_local_partitions() to remember device along with minor in the
1000 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1001 add else block to log unsupported netmount types to mount_network_shares()
1002
1003 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1004 src/GLIArchitectureTemplate.py:
1005 Refactor kernel_compile common stuff, fix 2.4 build process.
1006 src/fe/cli/clife.py:
1007 Logging system.
1008 src/GLIUtility.py, src/GLIStorageDevice.py:
1009 Add comments about re-writes needed for boxes without sysfs.
1010
1011 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1012 src/GLIArchitectureTemplate.py:
1013 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1014 'make dep' call for custom compile. build_mode support for prepare-only and
1015 none types completed. custom compile function chains shell functions in
1016 spawned script, to allow for catching all errors.
1017
1018 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1019 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1020 and GenDialog. other gendialog updates as well. kernel updates untested.
1021
1022 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1023 src/GLIInstallProfile.py:
1024 Change structure of etc-portage stuff. The serialization was broken before my
1025 last commit, and I am the only person that's ever used it. The new schema is
1026 as follows:
1027 <etc-portage>
1028 <file name="package.mask"/>
1029 <file name="package.unmask">
1030 <entry atom="sys-kernel/openmosix-sources"/>
1031 </file>
1032 <file name="package.use">
1033 <entry atom="sys-libs/db">
1034 -java
1035 </entry>
1036 <entry atom="dev-libs/cyrus-sasl">
1037 -ldap
1038 </entry>
1039 </file>
1040 </etc-portage>
1041
1042
1043 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1044 src/GLIInstallProfile.py:
1045 Add new entry for gli-profile/kernel-build-method item. Add missing
1046 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1047 keys in the same order.
1048
1049 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1050 src/GLIArchitectureTemplate.py:
1051 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1052 was repeatedly appended to make.conf.
1053
1054 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1055 src/GLIArchitectureTemplate.py:
1056 Put some Linux-2.6 specific code under a if statement. Store list of
1057 successfully mounted swap device for using swapoff. Add proper error checking
1058 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1059 'file'. Clean up some redundant code (thanks to pychecker).'
1060
1061 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1062 Fix typos: get_extended() instead of get_extended_partition(). Added
1063 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1064 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1065
1066 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1067 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1068 in add_network_interface.
1069
1070 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1071 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1072 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1073 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1074 prepare_chroot.
1075
1076 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1077 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1078 +src/fe/installer-gtk:
1079 Add new automated CLI frontend. Add scripts that are the intended means to
1080 use each frontend.
1081
1082 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1083 src/GLIClientController.py:
1084 Add null type to network config, for cases where the interface is already up
1085 and should not be touched (netboot for example).
1086
1087 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1088 src/GLIArchitectureTemplate.py:
1089 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1090 string!. Try to use binary packages if available by default.
1091
1092 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1093 src/GLIArchitectureTemplate.py:
1094 More error checking for _add_to_runlevel, to ensure that the init script
1095 actually exists before we try to add it. set_services phase must take place
1096 after the package installation, otherwise the init scripts might not exist.
1097 Find the correct init script for the cron and logging daemons, and add that
1098 instead of the package atom.
1099
1100 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1101 src/GLIArchitectureTemplate.py:
1102 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1103 usage of 'file' to 'contents' for the variable name, as it shadows
1104 __builtin__.file.
1105
1106 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1107 src/GLIArchitectureTemplate.py:
1108 Add MTA install code, and include MTA install phase. Ensure
1109 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1110 for 'none' kernel config for build_kernel phase. Put kernel_script in
1111 /var/tmp instead of /root for build_kernel phase.
1112
1113 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1114 Rename mta variables to match syslog/cron variables.
1115
1116 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1117 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1118 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1119 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1120 src/templates/.cvsignore, src/tests/.cvsignore:
1121 Refactor partition formatting again to include error checking. Allow 'none'
1122 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1123
1124 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1126 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1127 only have a single spawn call.
1128
1129 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1130 refixed samyron's fix of set_architecture_template.
1131
1132 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1133 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1134 be executable.
1135
1136 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1137 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1138 error checking when you call set_architecture_template.
1139
1140 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1141 moved the mkfsopts input to the partition options menu instead of the during
1142 the creation process. updated GenDialog to say it supports reiserfs v3.
1143
1144 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1145 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1146 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1147 Add support for other partition types to dialogfe.
1148 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1149 avoid integer overflows and wraparounds.
1150
1151 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1152 Removed start/end from XML output and added mkfsopts to partitioning info.
1153 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1154 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1155 in GLIClientConfiguration. Change from .1 and .9 to constants for
1156 partitioning. Fix free space overwriting bug. Remove a few unused functions
1157 from rewrite. Fix call to get_partition_at()
1158
1159 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1160 Updates to GenDialog and dialogfe.
1161
1162 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1163 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1164
1165 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1166 more GenDialog updates to partitioning.
1167
1168 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1169 Indenting issue in GLISD/get_ordered_partition_list.
1170 updates to GenDialog partitioning and added default UTC for timezone in IP.
1171
1172 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 Added GLISD.get_model()
1174
1175 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1176 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1177 More updates to GenDialog :)
1178
1179 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1180 Added get_interface_realname() function.
1181
1182 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1183 Added auto-save of CConfig and copying to new /root after install.
1184 yet even more GenDialog updates.
1185
1186 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1187 removed print statement from GLISD. more updates to GenDialog.
1188
1189 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1191 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1192 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1193 places in GLIClientConfiguration.
1194
1195 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1196 Fix mount_local_partitions(), configure_fstab(), and
1197 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1198 A few more fixes for templates/x86Archtemplate
1199
1200 27 May 2005; Preston Cody <codeman@gentoo.org>
1201 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1202 a work in progress.
1203
1204 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1206 directly. GLISD can now handle data imported from XML.
1207
1208 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1209 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1210 handle blank (no disklabel) disks.
1211
1212 20 May 2005; Preston Cody <codeman@gentoo.org>
1213 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1214 up, documented, and separated out serialization and grouped all sections.
1215
1216 19 May 2005; Preston Cody <codeman@gentoo.org>
1217 Reorganization of ClientConfiguration and gutting of unused functions.
1218 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1219
1220 18 May 2005; Preston Cody <codeman@gentoo.org>
1221 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1222
1223 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1224 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1225 partitioning. CC serializes install profile to disk and prepare_chroot()
1226 copies it into /mnt/gentoo/root
1227
1228 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1229 Moved URI parsing into new function parse_uri()
1230
1231 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1232 Added XMLParser module.
1233
1234 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1235 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1236 Minor fix to is_uri() regex to allow hyphens in hostname.
1237
1238 12 May 2005; Preston Cody <codeman@gentoo.org>
1239 Updated finishing_cleanup for new unmounting method from agaffney.
1240
1241 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 Fix GLILogger to use correct time format string. Fix _edit_config() to
1243 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1244 unicode support to is_realstring().
1245
1246 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1248 return value instead of non-zero. Add code to output a traceback to the
1249 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1250 instead of --nocolor.
1251
1252 10 May 2005; Preston Cody <codeman@gentoo.org>
1253 Added GLIGenDialog.py to make a generic class for the dialog functions that
1254 can be used by both dialogfe and the netfe/be. updated both for new filename.
1255 date changes. 2004->2005.
1256
1257 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Removed 'quiet=True' from spawn() calls
1259
1260 10 May 2005; Preston Cody <codeman@gentoo.org>
1261 Updated GLIUtility with patches from chotchki. Also added documentation
1262
1263 9 May 2005; Preston Cody <codeman@gentoo.org>
1264 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1265 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1266 from bug #89683, mostly touchups.
1267
1268 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 GLIStorageDevice cleanup patch from bug #91761
1270
1271 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1272 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1273 _edit_config(). Error logging casts 'error' to str
1274
1275 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1276 Exceptions received in CC are logged before being passed to the FE. Added
1277 code to CC to handle exceptions *not* thrown by the installer itself.
1278
1279 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 get_max_mb_for_resize() returns -1 if not self.resizeable
1281
1282 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 More dirty rsync hacks :-/
1284
1285 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1286 Patches from chotchki (bug #90325) to improve CC networking. untested.
1287
1288 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1290 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1291 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1292 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1293 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1294 _get_packages_to_emerge()
1295
1296 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1297 Added group-adding code to set_users in ArchTemplate
1298
1299 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1300 Added post-install script code
1301
1302 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1303 Fixed encapsulation issues in GLIClientController (bug #90141)
1304
1305 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1306 Update resizing code in GLIStorageDevice
1307
1308 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1309 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1310
1311 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 Reverted change to ArchTemplate and added support for commented line in old
1313 code.
1314
1315 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1316 Changed _edit_config() to modify value in-place instead of commenting out and
1317 adding the new value to the end of the file.
1318
1319 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1320 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1321 Also updated TODO list.
1322
1323 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1324 Use blackace's one-liner to add comments for all function for use with
1325 pythondoc.
1326
1327 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Moved 'end >= device_sectors' check out of loop to check for next partition's
1329 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1330 Partitioning code now tracks start/end of extended for placing logicals. End
1331 point of logical is now adjusted along with start.
1332
1333 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1335 the way of partitioning from a blank disk. Add int() around access to minor
1336 key in partition information due to new partition code leaving them as float.
1337
1338 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1340
1341 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1343
1344 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1345 Added support for DHCP options and MAC addresses in the InstallProfile.
1346
1347 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1349 sed to properly strip out junk.
1350
1351 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1352 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1353 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1354
1355 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1356 Fixed indent problem in GLICController
1357
1358 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1359 Check for disklabel type "loop" and use the device name without a minor.
1360
1361 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 Remove /tmp/compile_output.log and /var/log/install.log when install is
1363 complete. Added code to (hopefully) keep 2nd thread running after install.
1364 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1365 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1366 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1367
1368 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1369 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1370 when unpacking tarball.
1371
1372 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1373 rewrote filesystem_tools. looks like it works so ripping out all the old
1374 filesystem_tools code.
1375
1376 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1377 Changed the print statements to logging in the partitioning BE code.
1378 the logger may need to be imported to the x86archtemplate. unknown yet.
1379 Added the finishing_cleanup function.
1380 added a fix to the logger from BenUrban
1381
1382 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1383 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1384 URIs. The blank uri check has been commented out.
1385 ripped out error checking of set_services. this is done by _add_to_runlevel.
1386
1387 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1389
1390 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1391 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1392 the install profile if available. Commented out spawn() debugging prints
1393
1394 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1395 small changes to setup_network_post. moved adding to runlevel of net.x to
1396 after the device gets symlinked. added domainname runlevel command.
1397
1398 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1400 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1401 spawn() call in livecd-kernel code to pass environment variables.
1402 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1403 the install profile if available.
1404
1405 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1406 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1407 to handle installing the livecd kernel into the new system.
1408
1409 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1410 should emerge hotplug and coldplug before adding them to runlevel.
1411
1412 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1413 took chroot out of grub_install command.
1414
1415 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1416 Changed chroot wrapper code in spawn() to write the wrapper the python way
1417 instead of the bash way to avoid quote conflicts. Added
1418 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1419 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1420 as it breaks the piping.
1421
1422 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1423 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1424
1425 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1426 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1427 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1428 GLIInstallProfile.
1429
1430 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1431 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1432 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1433 into /mnt/gentoo in prepare_chroot()
1434
1435 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1436 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1437 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1438 to start/end sectors
1439
1440 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 Add 2>&1 to cmd in spawn()
1442
1443 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1444 Modified GLIUtility.exitsuccess() to work with return value from
1445 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1446 creates wrapper script for commands run inside chroot so multiple commands
1447 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1448 for the generated script from spawn()
1449
1450 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1451 Removed default values for stage tarball URI and portage tree URI from
1452 InstallProfile. These should be set by the FEs. also added services step to
1453 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1454 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1455
1456 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1457 Small fix for setting the default gateway. Also added feature to dialogfe.
1458
1459 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1460 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1461
1462 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1463 Fixed a bunch of true -> True typos. lots of em
1464 only write new resolv.conf if there are dns servers listed.
1465
1466 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1467 Commented out 'display_on_tty8=True' in start_portmap()
1468
1469 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1470 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1471
1472 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1473 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1474 lang parameter to __init__()
1475
1476 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1477 updates to TODO list.
1478
1479 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1480 Initial code for quickpkg GRP support. Fix loop to grab packages from
1481 'emerge -p blah'
1482
1483 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1484 check for dhcp in the network stuff and emerge it if it is.
1485 added quickpkg to TODO list
1486
1487 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1488 Changed the raising of 'warning' exceptions to a simple log of the error
1489 so that the installer can continue.
1490
1491 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1492 Some big changes. First, changed most output to display_on_tty8.
1493 Second, added log lines to all templates. Some smaller fixes such as typos.
1494 Also did some cleanups of old commented lines.
1495
1496 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1497 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1498 Undo change with fix. Escaping fix in GLIStorageDevice.py
1499
1500 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1501 more updates to TODO list. hopefully we'll soon start removing items instead
1502 of adding them.
1503
1504 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1505 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1506
1507 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1508 updated TODO list. (again)
1509
1510 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1511 changed output of portmap start to display_on_tty8.
1512 fixed bootloader for udev and multiple kernels
1513 fixed custom kernel config (again)
1514
1515 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1516 changed default value of CC._enable_ssh to True because this is smart.
1517 added code to allow custom kernel .config. may be unstable and break. sorry.
1518
1519 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1520 partition() now waits until after it checks for partition flags before delete
1521 the partitions :P
1522
1523 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1524 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1525 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1526 blank.
1527
1528 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1529 Various fixes related to the add_users function. Still not yet finished.
1530 Added things to the TODO list. Lets start using that!
1531
1532 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1533 Added code to x86Template to format newly created partitions. Also added
1534 some error checking code. GLIStorageDevice passes 'minor' with data to
1535 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1536 mounting code.
1537
1538 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1539 Took out unnecessary setting of random livecd root password. the cd already
1540 sets it randomly.
1541
1542 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1543 Took out an unneeded step from CC's run()
1544
1545 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1546 Attempt at detecting and adding windows partitions to lilo.
1547
1548 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1549 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1550 partition. fixed misc exit_status => exitstatus typo.
1551
1552 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1553 Added basic code for resizing filesystems with pyparted. Fixed code for
1554 resizing ntfs and ext2/3.
1555
1556 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1557 Fixed partition() in x86Template so that it scans through logicals and deletes
1558 before deleting containing extended partition. Also clears partition table to
1559 be safe before third pass.
1560
1561 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1562 Added mount_network_shares. not able to test it from this computer.
1563 will test when i get back to school.
1564 also added start_portmap to the client_controller as an always-do.
1565 agaffney says this is needed for NFS mounts to work.
1566
1567 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1568 Partial rewrite of partitioning code in x86Template. No longer shells out to
1569 parted to perform actions, now uses all pyparted calls. Code "works" in a
1570 test, but still needs lots of TLC. Also modified tests/install.py to work
1571 with x86Template and GLIClientConfiguration.
1572
1573 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1574 Initial move of partitioning code from ArchTemplate to x86Template.
1575
1576 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1577 Added grp_install and services to InstallProfile. forgot about the set_root_password
1578
1579 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1580 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1581 Test Install ran very well (skipping partitioning).
1582
1583 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1584 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1585 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1586 some may still have eluded me.
1587
1588 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1589 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1590 Just finished mount_local_partitions in GLIArchitectureTemplate
1591
1592 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1593 Added get_num_sectors() to GLIStorageDevice.
1594
1595 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1596 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1597 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1598 from GLIInstallProfile.
1599
1600 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1601 GLIStorageDevice returns "unknown" instead of "" for get_type()
1602
1603 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1604 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1605 actually work. Commented out resizability checking code for speed.
1606
1607 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1608 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1609 GLIStorageDevice at the suggestion of plors
1610
1611 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1612 Added a function to GLIUtility to pull a value from a make.conf-style config
1613 file. Minor type fix to GLIInstallProfile.py
1614
1615 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1616 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1617 network mounts from partition data structure in GLIInstallProfile
1618
1619 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1620 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1621 can be resized.
1622
1623 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1624 Added some of the final functions to GLIInstallTemplate.
1625 Yes this project is still active despite rare use of the Changelog!
1626
1627 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1628 Added the GLIPartitionTools.py file. This is a temporary insertion of
1629 partitioning tools that will eventually go into their own package.
1630
1631 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1632 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1633 for the program). Added __init__(install_profile, client_configuration) to
1634 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1635 to avoid constantly passing stuff every time we call a method.
1636
1637 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1638
1639 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1640 files without messing up all the other stuff in them. This will be used for making
1641 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1642
1643 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1644
1645 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1646 have a few basic things. I added two private methods. One is _depends(). This
1647 will be used for dependency checking (ie. unpacking a tarball requires that
1648 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1649 same syntax as os.system(), however, instead of being run in the liveCD
1650 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1651 isolated the code. Hope to work more this week to get this class formed...
1652
1653 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1654
1655 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1656 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1657 to allow for easier modification (mutable, rather than immutable objects). Updated
1658 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1659 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1660 Added initial unit test code.
1661
1662 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1663
1664 Added initial changelog. Setting up the basic structure of the CVS repository
1665 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1666 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20