/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1306 - (show annotations) (download)
Mon Feb 20 16:48:15 2006 UTC (8 years, 8 months ago) by agaffney
File size: 69519 byte(s)
  src/GLIPortage.py:
  add code make GLIPortage.py capable of being run stand-along for dynamic
  stage3 generation and copying packages in a GRP-ish way

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.600 2006/02/20 16:48:14 agaffney Exp $
5
6
7 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
8 src/GLIPortage.py:
9 add code make GLIPortage.py capable of being run stand-along for dynamic
10 stage3 generation and copying packages in a GRP-ish way
11
12 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
13 src/GLIPortage.py:
14 ignore blank packages passed to get_deps() and emerge()
15
16 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
17 src/GLIUtility.py:
18 add get_chosts() function
19
20 *GLI-0.3 (12 Feb 2006)
21
22 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
23 src/templates/x86ArchitectureTemplate.py:
24 pull old start/end sector values from somewhere that actually has them
25 add logic for extended partition to code that makes sure new end sector
26 doesn't overlap start sector of next partitions
27 don't freak out if partition can't be deleted
28
29 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
30 src/GLIPortage.py:
31 run env-update at the end of copy_pkg_to_chroot()
32
33 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/templates/x86ArchitectureTemplate.py:
35 I'm a complete fscking dumbass. I recorded the end sector for partitions that
36 weren't being touched, but I never used it when recreating them...the end was
37 calculated from the size in MB instead :/
38
39 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIArchitectureTemplate.py:
41 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
42 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
43 src/GLIPortage.py:
44 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
45 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
46 'resized' flag
47
48 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
49 src/GLIPortage.py:
50 short circuit and check vdb directly if package begins with '='
51
52 8 Feb 2006; Preston Cody <codeman@gentoo.org>
53 added more packages to extra_packages list in IP
54
55 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/templates/x86ArchitectureTemplate.py:
57 10 tries to create filesystem instead of 3
58 src/GLIPortage, src/GLIArchitectureTemplate.py:
59 ignore_missing flag for copy_pkg_to_chroot()
60
61 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
62 src/GLIPortage.py:
63 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
64
65 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
66 src/net/server/gliserv.py:
67 fix handling of 404 for real files
68 src/net/server/GLIServerProfile.py:
69 look for 'hostname' in attributes instead of 'name'
70
71 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/SimpleXMLParser.py:
73 initial support for 'include' in XML files
74 src/GLIStorageDevice.py:
75 initial support for %
76 src/GLIClientController.py:
77 add debugging statements to pre-install steps
78
79 15 Jan 2006; Preston Cody <codeman@gentoo.org>
80 webgli/configfiles:
81 check for key in etc_files['rc.conf'] to fix key error
82 webgli/timezone: small fix.
83 webgli/extrapackages: list-type fix
84 webgli/services: same
85 glimd: add/edit_client updates.
86
87 12 Jan 2006; Preston Cody <codeman@gentoo.org>
88 added configure.pyhtml to glimd. minor changes
89 to top and add_client. fixed up showargs.
90 added execute.pyhtml
91 changed register clients line in gliserv for name->hostname.
92 updated TODO.
93
94 10 Jan 2006; Preston Cody <codeman@gentoo.org>
95 src/net/server/*:
96 added add/del/edit client/profile.pythml for glimd.
97 updated templates, showclients, and gliserv.
98
99 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
100 src/net/server/*:
101 stupid threading module...
102
103 8 Jan 2006; Preston Cody <codeman@gentoo.org>
104 AT: rc.conf -> conf.d/clock
105
106 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
107 src/GLIPortage.py:
108 show 'Calculating dependencies for ...' in subprogress bar at beginning of
109 emerge()
110 src/GLIArchitectureTemplate.py:
111 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
112 in the chroot
113 remove _quickpkg_deps() and _portage_best_{visible,version}()
114 src/GLIUtility.py:
115 fail immediately in validate_uri() if provided URI can't be parsed
116 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
117 debug code in spawn()
118 use lower-level os.read() instead of file.read() because python sucks
119 src/templates/x86ArchitectureTemplate.py:
120 basic subprogress reporting for partitioning
121 total_steps was 1 too high
122
123 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
124 src/GLIUtility.py:
125 move parse_vdb_contents() to GLIPortage
126 src/GLIPortage.py:
127 remove all symlink fixups
128 ignore 'dir' entries in CONTENTS
129 call tar with -p
130
131 5 Jan 2006; Preston Cody <codeman@gentoo.org>
132 AT: bootsplash is now gensplash
133 gliserv: add advanced_mode to shared_info
134 webgli: Added advanced mode. mostly just disables a few screens.
135
136 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
137 src/GLIPortage.py:
138 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
139 added emerge()
140 update sub-progress after each package is emerged
141 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
142 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
143 remove link if it exists before moving content into place
144 src/GLIArchitectureTemplate.py:
145 install_packages() now calls emerge() in GLIPortage
146 change all calls to self._emerge() to self._portage.emerge()
147 comment out all emerge status checking...using exceptions now
148 call copy_pkg_to_chroot() directly for livecd-kernel
149
150 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIArchitectureTemplate.py:
152 remove add_pkg_to_world() and copy_pkg_to_chroot()
153 copy installer.log to installer.log.failed on install failure
154 src/GLIUtility.py:
155 added get_keymaps()
156 spawn() takes any False argument for chroot instead of just None
157 src/GLIPortage.py:
158 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
159 change copy_pkg_to_chroot() to work properly with use_root=False
160 figure PORTAGE_TMPDIR properly
161
162 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
163 src/net/server/html/*:
164 converted showclients, load/saveprofile
165
166 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
167 src/GLIPortage.py:
168 exclude packages already in chroot vdb from binary deplist
169 chroot to use best_version for chroot's vdb
170 src/runtimedeps.py:
171 accept ROOT via commandline instead of env
172
173 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
174 src/runtimedeps.py:
175 remove passing of ROOT
176 src/GLIPortage.py:
177 modify get_deps() to get deptree for each package and merge into final list
178 remove depgraph class
179 add debugging code to get_deps()
180 src/GLIArchitectureTemplate.py:
181 combine code for GRP/compile in install_packages() into one block
182 debugging code in install_packages()
183
184 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
185 src/runtimedeps.py:
186 initial commit
187 src/GLIPortage.py:
188 use separate script for GRP deps
189 remove calls to portage module
190
191 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
192 src/GLIPortage.py:
193 initial commit
194 move some of portage function from GLIAT
195 flipped around a few function args
196 src/GLIArchitectureTemplate.py:
197 revamp install_packages() for new GLIPortage
198
199 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
200 src/GLIArchitectureTemplate.py:
201 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
202
203 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
204 src/net/server/gliserv.py:
205 wrap generated code in a class to isolate it a bit better
206 302 redirects work
207 don't use cgi.escape() for <% %>
208 src/net/server/html/webgli/*:
209 load/save profile
210 src/GLIUtility.py:
211 change /sbin/lspci to just lspci
212
213 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIClientController.py:
215 change ordering of statements in CC run() while loop to not go past the end
216 of the array
217 src/GLIArchitectureTemplate.py:
218 removed redundant bind mounts
219
220 18 Dec 2005; Preston Cody <codeman@gentoo.org>
221 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
222 added a diagram by blackace from last night.
223 added the glossary in RTF format.
224
225 17 Dec 2005; Preston Cody <codeman@gentoo.org>
226 x86AT: separated out emerge/configure from running of bootloader
227 added MBR drive support to lilo.
228 these changes will likely not work.
229 AT: added setup_and_run_bootloader step.
230
231 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
232 src/net/server/gliserv.py:
233 call generated code in a function
234 src/net/server/html/webgli/*:
235 include top/bottom
236 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
237 src/GLIClientCongifuration.py:
238 install mode magic
239
240 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
241 src/GLIClientController.py:
242 use GLIException when there's an import problem
243 added debug code to show install_steps
244 src/templates/amd64ArchitectureTemplate.py:
245 add . to import path
246 proper path this time: ../../templates
247 src/GLIArchitectureTemplate.py:
248 add _portage_best_version() function
249
250 11 Dec 2005; Preston Cody <codeman@gentoo.org>
251 added initial glossary and gimli diagram to the docs directory.
252 modify gli-dialog to allow editing of the install_profile after loading XML.
253
254 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/net/server/html/webgli/:
256 converted globaluse, localuse, networkmounts, portagetree, and stageselection
257 moved saveclientconfig stuff into clientconfig
258 moved saveconfigfiles into config files
259 converted etc_portage and makedotconf
260 converted bootloader and kernel
261 convert daemons, extrapackages, networking, review, services, timezone, users
262 src/net/server/gliserv.py:
263 proper 404 handling for .pyhtml extension
264 HTML escape <% %> stuff
265 work around python's sucky regexes
266 src/GLIInstallProfile.py:
267 allow set_{rsync,ftp,http}_proxy() to accept empty values
268
269 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
270 src/net/server/gliserv.py:
271 initial commit of Legolas templating engine
272 302 redirects
273 src/net/server/html/index.html, src/net/server/webgli_template.html:
274 minor changes for new code
275 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
276 initial commit of the conversion from the monolithic WebGLIHandler.py to the
277 one file per path Legolas goodness
278 partitioning[2-4] done
279
280 5 Dec 2005; Preston Cody <codeman@gentoo.org>
281 webgli: dhcp options in CC and post-install.
282 updated comparison chart.
283 webgli: etc/portage/* and distcc support added. not too-well tested.
284
285 4 Dec 2005; Preston Cody <codeman@gentoo.org>
286 webgli_template.html: valign=top on left side.
287 webgli: fix bootloader boot_device. now working.
288 webgli: CC proxy done. post-install proxy in progress.
289
290 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
291 src/net/server/webgli_template.html:
292 increase padding for content cell to 7px and add colspan=2
293
294 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
295 webgli: added graphic bar on top
296 webgli: added hover effects on the links on the left
297 webgli: re-rendered header_bg.png to stretch without artifacts
298
299 3 Dec 2005; Preston Cody <codeman@gentoo.org>
300 webgli: make.conf disabling fixes for dynamic_stage3
301 fixed portage snapshot browse popup
302 all changes tested.
303 webgli: add debug mode to CC screen. the screen still needs lots of work.
304
305 1 Dec 2005; Preston Cody <codeman@gentoo.org>
306 added debug mode question to gli-dialog
307 added CC proxies to CC networking for gli-dialog
308 webgli: fixed skip CC networking if connection active
309 webgli: portage snapshot defaults to CD
310 webgli: bootloader mbr drive selection
311 webgli: USE flags unselectable if dynamic_stage3
312 webgli: manual extra packages and save button.
313
314 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
315 src/GLIUtility.py:
316 change ping count to 2
317 docs/comparison.html
318 initial commit
319
320 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
321 src/templates/x86ArchitectureTemplate.py:
322 fix map() issue with grub code
323 replace kernel_names and initrd_names loops with one-liners
324
325 27 Nov 2005; Preston Cody <codeman@gentoo.org>
326 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
327 initial gli-dialog support for recommended partitioning layout and clear.
328 failure cleanup now an option for gli-dialog.
329 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
330 added comparison list and updated TODO!
331
332 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIArchitectureTemplate.py:
334 fix to stage1() debug code
335 fix to stage2() debug code
336
337 26 Nov 2005; Preston Cody <codeman@gentoo.org>
338 some more bootloader code fixes. forgot boot_device != mbr_device.
339
340 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
341 src/GLIStorageDevice.py:
342 fix to unallocated space merging when last one is after part 4
343
344 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
345 src/GLIArchitectureTemplate.py:
346 small fix to debugging code in copy_pkg_to_chroot()
347
348 23 Nov 2005; Preston Cody <codeman@gentoo.org>
349 more bugfixes with bootloader code
350 gli-dialog side appears to work
351
352 21 Nov 2005; Preston Cody <codeman@gentoo.org>
353 initial adding of boot_device to backend.
354 initial boot_device support added to gli-dialog.
355 some fixes of my poor coding
356
357 20 Nov 2005; Preston Cody <codeman@gentoo.org>
358 converted gli-dialog to use the install_package_list.
359 gtkfe has already been converted by AllanonJL
360 new way working in gli-dialog now and added to webgli.
361 added set/get_boot_device() to IP
362
363 19 Nov 2005; Preston Cody <codeman@gentoo.org>
364 get_install_package_list added to InstallProfile. This can be used by the FEs
365
366 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
367 src/templates/x86ArchitectureTemplate.py:
368 call ls with '-1 --color=no'
369
370 16 Nov 2005; Preston Cody <codeman@gentoo.org>
371 added warning (#9) to GRP ppl about stage3 tarballs
372
373 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
374 src/GLIArchitectureTemplate.py:
375 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
376 confused
377
378 13 Nov 2005; Preston Cody <codeman@gentoo.org>
379 removed protocols from rc.conf screens
380 finished initial rc.conf and make.conf in webgli
381
382 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
383 src/net/server/gliserv.py:
384 add -h option to usage()
385 show time and request URI in debug mode
386 show client IP in debug mode
387 just use IP instead of trying to do a reverse lookup
388
389 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
390 src/net/server/gliserv.py:
391 'classier' 401 message
392 proper commandline parsing
393 help via -h
394 user/pass can be specificed via commandline option
395
396 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
397 src/net/server/gliserv.py:
398 basic HTTP auth
399
400 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
401 src/net/server/gliserv.py:
402 dynamic module reloading (yipee!)
403 send 'Last-Modified' header for real files
404 respond to HEAD with just headers
405 src/net/server/handlers/WebGLIHandler.py:
406 icons for drives
407
408 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
409 src/net/server/handlers/WebGLIHandler.py:
410 initial 'pretty' partition table display support
411 clicking partition in 'pretty' display works instead of radio buttons
412 radio buttons and pretty display work together
413 META redirect instead of javascript
414 pretty display stretches across entire screen
415 'Recommended layout' and 'Clear drive' functions
416 properly catch exceptions from do_recommended()
417 src/GLIArchitectureTemplate.py:
418 replace preinst, copy, postinst, rm steps with qmerge
419 whoops...that shouldn't have been commented out
420 create image_dir with -p in copy_pkg_to_chroot()
421 more generic of symlink crappiness
422 new copy_pkg_to_chroot() actually works now
423
424 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
425 src/GLIStorageDevice.py:
426 initial generic disk support
427 fixes for add_partition() code
428 src/net/server/handlers/WebGLIHandler.py:
429 added support for creating generic disks
430 add new partition working
431 save and delete partitions
432
433 6 Nov 2005; Preston Cody <codeman@gentoo.org>
434 webgli: Partitioning making progress.
435
436 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
437 src/GLIArchitectureTemplate.py:
438 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
439 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
440 dir) and works around /etc/gconf symlink problem
441
442 5 Nov 2005; Preston Cody <codeman@gentoo.org>
443 webgli: lots of updates. preliminary partitioning. extra packages works.
444
445 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
446 src/net/server/gliserv.py:
447 httpd now supports HTTPS and falls back to HTTP if not available
448 make fallback actually work
449 src/net/server/SecureXMLRPCServer.py:
450 SecureSocketServer is now threaded
451
452 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
453 src/net/client/gliclient.py:
454 try to use HTTPS for XMLRPC first and fallback to HTTP
455 pretend mode
456 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
457 HTTPS XMLRPC goodness from samyron
458 pass name of certificate
459
460 31 Oct 2005; Preston Cody <codeman@gentoo.org>
461 wegli: daemons and services screens done.
462
463 30 Oct 2005; Preston Cody <codeman@gentoo.org>
464 webgli: networking and users screens
465 added return_redirect to handler.py
466 loading and saving install/client profiles works for webgli now
467 Review also done
468
469 *GLI-0.2 (27 Oct 2005)
470
471 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
472 src/templates/x86ArchitectureTemplate.py:
473 properly check for bootloader emerge exist status with exitsuccess()
474 log output of grub install command
475 add --batch --no-floppy to grub command
476 grubinstallstring only gets logged if debug is on
477 src/GLIUtility.py:
478 update progress bar to 100% when process finishes
479
480 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
481 src/GLIClientController.py:
482 added debugging code for the interaction between the 2 threads via Event()
483 src/GLIUtility.py:
484 doubled the buffer size in spawn()
485 bump buffer size up to 16384
486 only report progress in 5% increments
487 src/GLIArchitectureTemplate.py:
488 kernelpkgs.txt support code
489 above disabled because it sucks
490 added add_pkg_to_world()
491
492 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
493 src/GLIArchitectureTemplate.py:
494 use tar | tar to copy files in copy_pkg_to_chroot()
495 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
496
497 23 Oct 2005; Preston Cody <codeman@gentoo.org>
498 DEBUGGING ADDED TO AT. verbose field added to CConfig.
499
500 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
501 src/net/server/gliserv.py:
502 / maps to index.html
503 look for actual files in html/
504 src/net/html:
505 new template
506 src/GLIUtility.py:
507 added parse_vdb_contents()
508 src/GLIArchitectureTemplate.py:
509 added copy_pkg_to_chroot()
510 added debug code to dynamic-stage3
511 switch dynamic-stage3 to new method
512 lots of bug fixes from adding debug code
513
514 22 Oct 2005; Preston Cody <codeman@gentoo.org>
515 webgli initial bootloader support + changed make.conf.
516 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
517
518 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
519 src/GLIUtility.py:
520 horrible tangled mess of code that is tarball unpacking subprogress display
521 add unpack progress to portage snapshot
522 use read() instead of readlines() in spawn()
523 only update progress bar for whole percents
524
525 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/templates/x86ArchitectureTemplate.py:
527 change call to 'grub' to use GLIUtility.exitsuccess()
528 add definition of 'build_mode' in _configure_lilo()
529 src/misc/updategtkfe, src/misc/updateglid:
530 fix so subshell is called in root shell
531
532 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
533 src/net/server/handlers/WebGLIHandler.py:
534 stage screen launches URI browser in sized window with various properties set
535
536 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
537 src/misc/updategtkfe:
538 updated to actually work
539 remove previous snapshot and extracted dir before downloading
540 src/misc/updateglid:
541 updated to actually work
542 src/templates/x86ArchitectureTemplate.py:
543 fixed bug where grub code was looking for 'root+root+file_name2'
544
545 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/net/server/handlers/WebGLIHandler.py:
547 URI browser
548 added mirror selection
549 src/GLIUtility.py:
550 ls via ssh strips off ending *
551
552 16 Oct 2005; Preston Cody <codeman@gentoo.org>
553 more updates to webgli. stage selection.
554
555 11 Oct 2005; Preston Cody <codeman@gentoo.org>
556 updated webgli with preliminary Network Mounts support.
557
558 9 Oct 2005; Preston Cody <codeman@gentoo.org>
559 GenDialog: string formatting and yes/no label fixes.
560 added WebGLI template for gliserv.py
561 added WebGLIHandler as well as a definition for it in gliserv.py
562 updates to the webgli files even though they won't be there for long.
563 Utility: remove exception for non-existant grppkgs.txt until the new livecd
564 goes public.
565
566 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
567 src/net/server/gliserv.py:
568 override dict to not be so anal
569 main server now loads separate module to handle requests
570 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
571 split out profile URLs into separate handler function
572 move handlers into subdirectory
573 add Welcome and Clients handlers
574
575 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
576 src/GLIUtility.py:
577 raise exception if password prompt received twice
578
579 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
580 src/GLIUtility.py:
581 removed rot13ify()
582
583 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
584 src/net/server/gliserv.py:
585 allow for param to be passed multiple times in GET
586 no XMLRPC functions return None
587 modify POST request parsing to only create a list if needed
588 fix GET request parsing so the list creation for multiple values works
589 src/net/client/gliclient.py:
590 various typo and type mismatch fixes
591 exit after exception
592
593 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
594 src/net/client/gliclient.py:
595 initial commit
596 pass MAC to XMLRPC functions
597 src/net/server/GLIServerProfile.py:
598 rename GLIClientsProfiles to GLIServerProfile
599
600 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
601 src/net/server/gliserv.py:
602 now handles POST requests
603 move majority of request handling code to common_handler() to reduce code
604 duplication
605 profile loading
606 client reg via XMLRPC goes into SharedInfo()
607 /showclients redesign
608 template fixes
609 allow handler functions to add/change headers
610 save profile
611
612 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/net/server/GLIClientsProfiles.py:
614 initial commit
615 src/net/server/template.html:
616 initial commit
617 src/net/server/gliserv.py:
618 add template mojo
619
620 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
621 src/net/server/gliserv.py:
622 XMLRPC mojo
623
624 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
625 src/GLIArchitectureTemplate.py:
626 add code in _edit_config() to comment line where variable is defined
627 previously
628 insert new line under previous definition of variable if it exists
629 small _edit_config() cleanup
630 src/GLIStorageDevice.py:
631 add clear_partitions() function
632 new sizes for recommended partition layout
633 automatically calculate swap size for recommended layout
634
635 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
636 src/templates/x86ArchitectureTemplate.py:
637 fat16 mojo
638
639 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
640 src/GLIStorageDevice.py:
641 prevent do_recommended() from being run twice
642 rewrite do_recommended() to be more robust
643 src/GLIArchitectureTemplate.py:
644 rework _edit_config() to not write duplicate entries
645
646 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
647 src/GLIStorageDevice.py:
648 added do_recommended() function to automatically created 256M/1G/* layout
649
650 17 Sep 2005; Preston Cody <codeman@gentoo.org>
651 src/gli-dialog.py: added set_distcc to the list
652 GenDialog: added set_distcc. untested.
653 IP: added install_distcc flag.
654 AT: added install_distcc function based on the flag. runs after build_kernel
655 changed AT spawn command for distcc for nodeps.
656
657 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
658 src/GLIUtility.py:
659 add rot13ify() function
660
661 16 Sep 2005; Preston Cody <codeman@gentoo.org>
662 src/GenDialog.py
663 added a sentence of text. unchecking support added.
664
665 15 Sep 2005; Preston Cody <codeman@gentoo.org>
666 src/GLIUtility.py
667 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
668 src/GenDialog.py
669 still working on extra_packages. transformed the list to new format.
670 added GRP indication to list. untested.
671 TODO lists updated.
672 src/fe/dialog/gli-dialog.py
673 spelling mistook.
674
675 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
676 src/GLIUtility.py:
677 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
678
679 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
680 src/GLIUtility.py:
681 add get_directory_listing_from_uri()
682 add http support to above
683 add ftp support to above
684 add scp support to above
685 src/GLIArchitectureTemplate.py:
686 "0" instead of 0 for key of single-element dict passed to _edit_config()
687
688 5 Sep 2005; Preston Cody <codeman@gentoo.org>
689 value_only -> only_value
690
691 3 Sep 2005; Preston Cody <codeman@gentoo.org>
692 gutted out all of etc_portage structure since it is now all handled by
693 etc_files
694
695 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
696 src/GLIArchitectureTemplate.py:
697 install_packages() sends progress update notifications
698 src/templates/x86ArchitectureTemplate.py:
699 increase sleep to 5s between format tries
700 src/GLIClientController.py:
701 pass 'self' to AT instead of 'self._pretend'
702
703 2 Sep 2005; Preston Cody <codeman@gentoo.org>
704 logger -> logger.log in x86AT
705
706 1 Sep 2005; Preston Cody <codeman@gentoo.org>
707 added set_etc_portage to IP. debugging gli-d's support for it.
708
709 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
710 src/templates/x86ArchitectureTemplate.py:
711 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
712
713 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
714 src/GLIArchitectureTemplate.py:
715 add _portage_best_version() function and rework install_packages() to allow
716 for future X of Y tracking
717 Use best_visible instead of best_version
718 tracked down and fixed missing = causing empty install extra packages
719 use = when emerging also
720 quickpkg hokey pokey
721 run _get_packages_to_emerge() again with -pk
722
723 22 Aug 2005; Preston Cody <codeman@gentoo.org>
724 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
725 the end of install_packages.
726 added updateglid to /src/misc
727 updated all core files with new GPL notice and copyright statement.
728
729 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
730 src/GLIUtility.py:
731 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
732 a snapshot in /mnt/cdrom/snapshots/
733 get_snapshot_from_cd() adds file:// at the beginning
734 change calls to extra package special case functions to 'self.blah'
735
736 21 Aug 2005; Preston Cody <codeman@gentoo.org>
737 src/ArchTemplate: changed "voodoo".
738 changed order of portage sync methods. made a fallback to webrsync if
739 normal emerge sync fails.
740 removed get_sources_from_cd because it is obsolete.
741 add special cases to install_packages. remove fatal exception on package
742 install failure b/c the box will still be bootable.
743 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
744 handled in the FEs.
745 src/GenDialog: added a bunch of code for dealing with x11-based packages.
746 awaiting testing.
747
748 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
749 src/GLIStorageDevice.py:
750 global try/except block around fs resizable detection code
751 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
752 install-failed cleanup function
753
754 18 Aug 2005; Preston Cody <codeman@gentoo.org>
755 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
756
757 16 Aug 2005; Preston Cody <codeman@gentoo.org>
758 GLIGenDialog:
759 add drive choices for loaded configs.
760 force snapshot for dynamic_stage3
761 init the snapshoturi input to the cd snapshot if not already selected.
762 if dynamic_stage3, skip the make.conf step.
763 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
764 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
765
766 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
767 src/GLIArchitectureTemplate.py:
768 manually call MAKEDEV in stage3-dynamic code
769 copy /etc/inittab.old to /etc/inittab in chroot
770 src/GLIUtility.py:
771 add beginning of validate_uri() function
772 add file:/// support to validate_uri()
773 single quotes when setting livecd password
774
775 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
776 src/GLIGenDialog.py:
777 change getmountpoint() to get_mountpoint()
778 src/misc/updategtkfe:
779 committed script to automatically download latest snapshot and run gtkfe
780 src/templates/x86ArchitectureTemplate.py:
781 fix _configure_lilo_add_windows() for IP -> GLISD stuff
782 src/GLIArchitectureTemplate.py:
783 give tmp_minor an initial value in mount_local_partitions so that the value
784 remain from the previous drive
785
786 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
787 src/templates/x86ArchitectureTemplate.py:
788 Fix _configure_lilo() for IP using GLISD stuff
789 src/GLIArchitectureTemplate.py:
790 install_cron_daemon() treats "none" specially
791
792 14 Aug 2005; Preston Cody <codeman@gentoo.org>
793 old patch from Steven Mertens to resolve bug #96642
794 numerous asthetic changes to GenDialog, no real functionality changes though.
795 strings renamed for global use if necessary.
796 fix all three parts of bug 102291
797 disable set_etc_portage until fully-written.
798
799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
800 src/GLIClientController.py:
801 lower-case http/ftp proxy envvars
802
803 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
804 src/GLIClientController.py:
805 log end of pre_install steps to aid in debugging
806 src/templates/x86ArchitectureTemplate.py:
807 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
808
809 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
810 src/GLIArchitectureTemplate.py
811 check to make sure that the device node we're wait for to exist isn't of
812 type 'free'
813
814 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
815 src/GLIGenDialog.py:
816 convert install_packages to list in set_extra_packages()
817 check return code of checklist() call in "Manual" section
818 *actually* fix the first problem
819
820 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
821 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
822 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
823
824 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
825 src/GLIArchitectureTemplate.py:
826 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
827
828 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
829 Add CDATA support to SimpleXMLParser and add utility functions for it.
830
831 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
832 src/GLIArchitectureTemplate.py:
833 Fix case where vixie-cron is specified as a full package atom, as we still
834 don't want to run 'crontab /etc/crontab' for it.
835
836 *GLI-0.1 (3 Aug 2005)
837
838 30 Jul 2005; Preston Cody <codeman@gentoo.org>
839 add scp to list of is_uri() so GenDialog doesn't complain.
840 fixed livecd-kernel bug in bootloader code.
841 fixed gendialog for dynamic_stage3 instead of "networkless"
842 change bootloader to allow for both initrd and initramfs.
843 fix IP for dynamic_stage3.
844 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
845
846 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
847 Added full scp:// URI support to get_uri() in GLIUtility
848 Remove "networkless" from dynamic stage3 if locic.
849 Remove print statement from scp:// code.
850 Change scp code to check for "assword: " instead of "Password:"
851 Fix post-install network code to create net.eth1+ symlink correctly
852 Check to make sure pkg can be split on / and some debugging code
853 Add 2>dev/null to emerge call in _get_packages_to_emerge()
854 SimpleXMLParser handles True/False/None correctly now
855 Comment out above fix
856 Add partitioning wait-for-device-to-exist code to mount_local_partitions
857
858 28 Jul 2005; Scott Myron <samyron@gentoo.org>
859 Removed a FIXME in the GLIClientConfiguration that is no
860 longer needed.
861
862 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
863 Default to x86 in ClientConfig
864 Typo in build-a-stage3 code.
865 Remove MAKEDEV call in build-a-stage3 postscript.
866
867 26 Jul 2005; Preston Cody <codeman@gentoo.org>
868 Rewrote init of IP for gli-d. Other GenDialog updates.
869 allow network_type to be None in CConfig.
870
871 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
872 Add _dynamic_stage3 option to IP.
873 Add check for that option to dynamic stage3 code in ArchTemplate.
874 Fix code to determine default route in get_eth_info() in GLIUtility.
875 Fix serialization of dns-servers in ClientConfig.
876
877 24 Jul 2005; Preston Cody <codeman@gentoo.org>
878 changed default values of cron/logger in IP.
879 moved GenDialog IP init out to the individual files. gli-dialog's version
880 will change quite a bit.
881
882 22 Jul 2005; Preston Cody <codeman@gentoo.org>
883 added ppcArchTemplate. blank now. working on yaboot.
884 modified ArchTemplate for amd64 and ppc custom kernels.
885 skeleton implementation of _configure_yaboot.
886 small fixes to other templates.
887
888 21 Jul 2005; Preston Cody <codeman@gentoo.org>
889 GenDialog updates. changed comment in IP.
890
891 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
892 src/GLIInstallProfile.py:
893 Fix codeman's screwup of changing the service seperator to ',' in the parser
894 without changing it in the serialization code! Also document this in a
895 comment so you find it easier. Everybody needs to make sure they update
896 their install profiles!
897
898 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
899 src/GLIArchitectureTemplate.py:
900 Fix casting of list to string and concat of None with string, as well as
901 commented prototype of checking that mounting actually worked (found a case
902 where mount can return success, but the mount won't be done).
903
904 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
905 src/templates/x86ArchitectureTemplate.py:
906 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
907 checking for the device, and sleeping 1 second each time.
908
909 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
910 src/templates/x86ArchitectureTemplate.py:
911 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
912 bootloader works again. Also rename _install_{grub,lilo} to
913 _configure_{grub,lilo} since they don't install the loaders anymore
914 themselves.
915
916 7 Jul 2005; Preston Cody <codeman@gentoo.org>
917 fix global USE flags to not include the arch types at the end.
918 updates to GenDialog and gli-d.
919
920 6 Jul 2005; Preston Cody <codeman@gentoo.org>
921 fixing bootloader code for no initrd and initrd->initramfs naming change.
922
923 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
924 Proper comments and parameters to GLIException in install_mta()
925 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
926 Add strip() to list_mirrors(), list_subarch_from_mirror() and
927 list_tarball_from_mirror() to eliminate blank last item.
928
929 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
930 Added stage3 generation code.
931
932 5 Jul 2005; Preston Cody <codeman@gentoo.org>
933 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
934 Mild changes to GenDialog.
935
936 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
937 Remove separate install step configure_rc_conf() since it's handled by
938 update_config_files()
939 Make a copy of newvalues in _edit_config() so quotes aren't added when the
940 function is called twice on the same file.
941
942 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
943 Missing \ in sed in _get_packages_to_emerge()
944 Removed explicit emerging of hotplug and no longer add it to the runlevel.
945 Check in _quickpkg_deps() to ignore blank package names returned from
946 _get_packages_to_emerge()
947
948 28 Jun 2005; Preston Cody <codeman@gentoo.org>
949 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
950 in the dialog.py gauge code.
951
952 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
953 Add code to update_config_files() to go through etc_files and update stuff.
954 Check to see that _etc_files['make.conf'] exists in get_make_conf()
955 Only use float() in partition xml parsing code if type == "free"
956
957 28 Jun 2005; Preston Cody <codeman@gentoo.org>
958 finished almost all internationalization of GenDialog.
959 attempt at fixing rc.conf function. moved 3 generate functions out of
960 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
961 added dialog.py to the fe/dialog directory so it actually gets used.
962
963 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
964 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
965
966 27 Jun 2005; Preston Cody <codeman@gentoo.org>
967 fix extra entry in list_mirrors()
968 beginning internationalization runthrough.
969
970 26 Jun 2005; Preston Cody <codeman@gentoo.org>
971 added dialog.py to /src temporarily until it gets accepted upstream.
972 fix for unused value in form in dialog.py and changed heights.
973 fix GenDialog forms.
974
975 25 Jun 2005; Preston Cody <codeman@gentoo.org>
976 Changed hostname/domainname for new baselayout.
977 Changed _add_to_runlevel errors to logs.
978 Updated TODO list to show status of GenDialog
979 More updates to GenDialog including two checklists that probably won't work.
980 update IP to use comma-separated list instead of space separated for services.
981
982 24 Jun 2005; Preston Cody <codeman@gentoo.org>
983 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
984 GenDialog as it gets closer to completion.
985
986 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
987 Modify get_eth_info() to take a full interface name (eth0 fex). float()
988 instead of int() in add_partition_device_partition() for minor (closes 96804)
989
990 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
991 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
992 instead of 'interfaces[interface][1]' since DHCP uses that field for its
993 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
994
995 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
996 Apply spawn() patch from #96644 (with minor changes). Make sure the return
997 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
998 small error with <pipe>.close() returning None. Fix space vs. tab issue.
999 Fix undefined variable 'output' issue in spawn().
1000
1001 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1002 More updates to GenDialog and gli-d.
1003
1004 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1005 Modify list_mirrors() to return a list of mirror URL/name pairs.
1006
1007 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1008 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1009 get subarch.
1010
1011 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012 Backend partitioning will create disklabel is none exists. Installprofile
1013 defaults to "" now instead of "msdos" for disklabel type. Fix for
1014 mount_local_partitions() to remember device along with minor in the
1015 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1016 add else block to log unsupported netmount types to mount_network_shares()
1017
1018 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1019 src/GLIArchitectureTemplate.py:
1020 Refactor kernel_compile common stuff, fix 2.4 build process.
1021 src/fe/cli/clife.py:
1022 Logging system.
1023 src/GLIUtility.py, src/GLIStorageDevice.py:
1024 Add comments about re-writes needed for boxes without sysfs.
1025
1026 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1027 src/GLIArchitectureTemplate.py:
1028 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1029 'make dep' call for custom compile. build_mode support for prepare-only and
1030 none types completed. custom compile function chains shell functions in
1031 spawned script, to allow for catching all errors.
1032
1033 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1034 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1035 and GenDialog. other gendialog updates as well. kernel updates untested.
1036
1037 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1038 src/GLIInstallProfile.py:
1039 Change structure of etc-portage stuff. The serialization was broken before my
1040 last commit, and I am the only person that's ever used it. The new schema is
1041 as follows:
1042 <etc-portage>
1043 <file name="package.mask"/>
1044 <file name="package.unmask">
1045 <entry atom="sys-kernel/openmosix-sources"/>
1046 </file>
1047 <file name="package.use">
1048 <entry atom="sys-libs/db">
1049 -java
1050 </entry>
1051 <entry atom="dev-libs/cyrus-sasl">
1052 -ldap
1053 </entry>
1054 </file>
1055 </etc-portage>
1056
1057
1058 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1059 src/GLIInstallProfile.py:
1060 Add new entry for gli-profile/kernel-build-method item. Add missing
1061 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1062 keys in the same order.
1063
1064 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1065 src/GLIArchitectureTemplate.py:
1066 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1067 was repeatedly appended to make.conf.
1068
1069 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1070 src/GLIArchitectureTemplate.py:
1071 Put some Linux-2.6 specific code under a if statement. Store list of
1072 successfully mounted swap device for using swapoff. Add proper error checking
1073 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1074 'file'. Clean up some redundant code (thanks to pychecker).'
1075
1076 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1077 Fix typos: get_extended() instead of get_extended_partition(). Added
1078 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1079 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1080
1081 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1082 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1083 in add_network_interface.
1084
1085 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1086 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1087 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1088 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1089 prepare_chroot.
1090
1091 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1092 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1093 +src/fe/installer-gtk:
1094 Add new automated CLI frontend. Add scripts that are the intended means to
1095 use each frontend.
1096
1097 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1098 src/GLIClientController.py:
1099 Add null type to network config, for cases where the interface is already up
1100 and should not be touched (netboot for example).
1101
1102 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1103 src/GLIArchitectureTemplate.py:
1104 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1105 string!. Try to use binary packages if available by default.
1106
1107 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1108 src/GLIArchitectureTemplate.py:
1109 More error checking for _add_to_runlevel, to ensure that the init script
1110 actually exists before we try to add it. set_services phase must take place
1111 after the package installation, otherwise the init scripts might not exist.
1112 Find the correct init script for the cron and logging daemons, and add that
1113 instead of the package atom.
1114
1115 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1116 src/GLIArchitectureTemplate.py:
1117 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1118 usage of 'file' to 'contents' for the variable name, as it shadows
1119 __builtin__.file.
1120
1121 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1122 src/GLIArchitectureTemplate.py:
1123 Add MTA install code, and include MTA install phase. Ensure
1124 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1125 for 'none' kernel config for build_kernel phase. Put kernel_script in
1126 /var/tmp instead of /root for build_kernel phase.
1127
1128 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1129 Rename mta variables to match syslog/cron variables.
1130
1131 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1132 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1133 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1134 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1135 src/templates/.cvsignore, src/tests/.cvsignore:
1136 Refactor partition formatting again to include error checking. Allow 'none'
1137 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1138
1139 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1140 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1141 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1142 only have a single spawn call.
1143
1144 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1145 refixed samyron's fix of set_architecture_template.
1146
1147 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1148 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1149 be executable.
1150
1151 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1152 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1153 error checking when you call set_architecture_template.
1154
1155 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1156 moved the mkfsopts input to the partition options menu instead of the during
1157 the creation process. updated GenDialog to say it supports reiserfs v3.
1158
1159 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1160 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1161 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1162 Add support for other partition types to dialogfe.
1163 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1164 avoid integer overflows and wraparounds.
1165
1166 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 Removed start/end from XML output and added mkfsopts to partitioning info.
1168 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1169 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1170 in GLIClientConfiguration. Change from .1 and .9 to constants for
1171 partitioning. Fix free space overwriting bug. Remove a few unused functions
1172 from rewrite. Fix call to get_partition_at()
1173
1174 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1175 Updates to GenDialog and dialogfe.
1176
1177 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1179
1180 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1181 more GenDialog updates to partitioning.
1182
1183 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1184 Indenting issue in GLISD/get_ordered_partition_list.
1185 updates to GenDialog partitioning and added default UTC for timezone in IP.
1186
1187 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1188 Added GLISD.get_model()
1189
1190 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1191 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1192 More updates to GenDialog :)
1193
1194 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1195 Added get_interface_realname() function.
1196
1197 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1198 Added auto-save of CConfig and copying to new /root after install.
1199 yet even more GenDialog updates.
1200
1201 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1202 removed print statement from GLISD. more updates to GenDialog.
1203
1204 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1206 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1207 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1208 places in GLIClientConfiguration.
1209
1210 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1211 Fix mount_local_partitions(), configure_fstab(), and
1212 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1213 A few more fixes for templates/x86Archtemplate
1214
1215 27 May 2005; Preston Cody <codeman@gentoo.org>
1216 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1217 a work in progress.
1218
1219 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1220 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1221 directly. GLISD can now handle data imported from XML.
1222
1223 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1224 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1225 handle blank (no disklabel) disks.
1226
1227 20 May 2005; Preston Cody <codeman@gentoo.org>
1228 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1229 up, documented, and separated out serialization and grouped all sections.
1230
1231 19 May 2005; Preston Cody <codeman@gentoo.org>
1232 Reorganization of ClientConfiguration and gutting of unused functions.
1233 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1234
1235 18 May 2005; Preston Cody <codeman@gentoo.org>
1236 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1237
1238 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1239 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1240 partitioning. CC serializes install profile to disk and prepare_chroot()
1241 copies it into /mnt/gentoo/root
1242
1243 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 Moved URI parsing into new function parse_uri()
1245
1246 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 Added XMLParser module.
1248
1249 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1250 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1251 Minor fix to is_uri() regex to allow hyphens in hostname.
1252
1253 12 May 2005; Preston Cody <codeman@gentoo.org>
1254 Updated finishing_cleanup for new unmounting method from agaffney.
1255
1256 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Fix GLILogger to use correct time format string. Fix _edit_config() to
1258 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1259 unicode support to is_realstring().
1260
1261 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1262 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1263 return value instead of non-zero. Add code to output a traceback to the
1264 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1265 instead of --nocolor.
1266
1267 10 May 2005; Preston Cody <codeman@gentoo.org>
1268 Added GLIGenDialog.py to make a generic class for the dialog functions that
1269 can be used by both dialogfe and the netfe/be. updated both for new filename.
1270 date changes. 2004->2005.
1271
1272 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1273 Removed 'quiet=True' from spawn() calls
1274
1275 10 May 2005; Preston Cody <codeman@gentoo.org>
1276 Updated GLIUtility with patches from chotchki. Also added documentation
1277
1278 9 May 2005; Preston Cody <codeman@gentoo.org>
1279 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1280 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1281 from bug #89683, mostly touchups.
1282
1283 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 GLIStorageDevice cleanup patch from bug #91761
1285
1286 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1287 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1288 _edit_config(). Error logging casts 'error' to str
1289
1290 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Exceptions received in CC are logged before being passed to the FE. Added
1292 code to CC to handle exceptions *not* thrown by the installer itself.
1293
1294 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1295 get_max_mb_for_resize() returns -1 if not self.resizeable
1296
1297 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 More dirty rsync hacks :-/
1299
1300 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1301 Patches from chotchki (bug #90325) to improve CC networking. untested.
1302
1303 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1305 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1306 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1307 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1308 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1309 _get_packages_to_emerge()
1310
1311 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1312 Added group-adding code to set_users in ArchTemplate
1313
1314 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1315 Added post-install script code
1316
1317 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 Fixed encapsulation issues in GLIClientController (bug #90141)
1319
1320 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Update resizing code in GLIStorageDevice
1322
1323 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1324 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1325
1326 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1327 Reverted change to ArchTemplate and added support for commented line in old
1328 code.
1329
1330 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1331 Changed _edit_config() to modify value in-place instead of commenting out and
1332 adding the new value to the end of the file.
1333
1334 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1335 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1336 Also updated TODO list.
1337
1338 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 Use blackace's one-liner to add comments for all function for use with
1340 pythondoc.
1341
1342 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1343 Moved 'end >= device_sectors' check out of loop to check for next partition's
1344 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1345 Partitioning code now tracks start/end of extended for placing logicals. End
1346 point of logical is now adjusted along with start.
1347
1348 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1349 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1350 the way of partitioning from a blank disk. Add int() around access to minor
1351 key in partition information due to new partition code leaving them as float.
1352
1353 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1355
1356 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1358
1359 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1360 Added support for DHCP options and MAC addresses in the InstallProfile.
1361
1362 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1363 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1364 sed to properly strip out junk.
1365
1366 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1367 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1368 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1369
1370 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1371 Fixed indent problem in GLICController
1372
1373 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Check for disklabel type "loop" and use the device name without a minor.
1375
1376 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1377 Remove /tmp/compile_output.log and /var/log/install.log when install is
1378 complete. Added code to (hopefully) keep 2nd thread running after install.
1379 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1380 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1381 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1382
1383 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1385 when unpacking tarball.
1386
1387 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1388 rewrote filesystem_tools. looks like it works so ripping out all the old
1389 filesystem_tools code.
1390
1391 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1392 Changed the print statements to logging in the partitioning BE code.
1393 the logger may need to be imported to the x86archtemplate. unknown yet.
1394 Added the finishing_cleanup function.
1395 added a fix to the logger from BenUrban
1396
1397 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1398 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1399 URIs. The blank uri check has been commented out.
1400 ripped out error checking of set_services. this is done by _add_to_runlevel.
1401
1402 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1403 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1404
1405 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1406 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1407 the install profile if available. Commented out spawn() debugging prints
1408
1409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1410 small changes to setup_network_post. moved adding to runlevel of net.x to
1411 after the device gets symlinked. added domainname runlevel command.
1412
1413 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1414 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1415 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1416 spawn() call in livecd-kernel code to pass environment variables.
1417 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1418 the install profile if available.
1419
1420 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1421 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1422 to handle installing the livecd kernel into the new system.
1423
1424 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1425 should emerge hotplug and coldplug before adding them to runlevel.
1426
1427 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1428 took chroot out of grub_install command.
1429
1430 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1431 Changed chroot wrapper code in spawn() to write the wrapper the python way
1432 instead of the bash way to avoid quote conflicts. Added
1433 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1434 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1435 as it breaks the piping.
1436
1437 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1438 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1439
1440 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1442 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1443 GLIInstallProfile.
1444
1445 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1446 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1447 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1448 into /mnt/gentoo in prepare_chroot()
1449
1450 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1451 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1452 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1453 to start/end sectors
1454
1455 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1456 Add 2>&1 to cmd in spawn()
1457
1458 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1459 Modified GLIUtility.exitsuccess() to work with return value from
1460 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1461 creates wrapper script for commands run inside chroot so multiple commands
1462 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1463 for the generated script from spawn()
1464
1465 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1466 Removed default values for stage tarball URI and portage tree URI from
1467 InstallProfile. These should be set by the FEs. also added services step to
1468 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1469 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1470
1471 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1472 Small fix for setting the default gateway. Also added feature to dialogfe.
1473
1474 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1475 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1476
1477 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1478 Fixed a bunch of true -> True typos. lots of em
1479 only write new resolv.conf if there are dns servers listed.
1480
1481 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1482 Commented out 'display_on_tty8=True' in start_portmap()
1483
1484 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1485 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1486
1487 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1488 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1489 lang parameter to __init__()
1490
1491 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1492 updates to TODO list.
1493
1494 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1495 Initial code for quickpkg GRP support. Fix loop to grab packages from
1496 'emerge -p blah'
1497
1498 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1499 check for dhcp in the network stuff and emerge it if it is.
1500 added quickpkg to TODO list
1501
1502 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1503 Changed the raising of 'warning' exceptions to a simple log of the error
1504 so that the installer can continue.
1505
1506 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1507 Some big changes. First, changed most output to display_on_tty8.
1508 Second, added log lines to all templates. Some smaller fixes such as typos.
1509 Also did some cleanups of old commented lines.
1510
1511 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1512 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1513 Undo change with fix. Escaping fix in GLIStorageDevice.py
1514
1515 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1516 more updates to TODO list. hopefully we'll soon start removing items instead
1517 of adding them.
1518
1519 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1520 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1521
1522 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1523 updated TODO list. (again)
1524
1525 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1526 changed output of portmap start to display_on_tty8.
1527 fixed bootloader for udev and multiple kernels
1528 fixed custom kernel config (again)
1529
1530 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1531 changed default value of CC._enable_ssh to True because this is smart.
1532 added code to allow custom kernel .config. may be unstable and break. sorry.
1533
1534 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1535 partition() now waits until after it checks for partition flags before delete
1536 the partitions :P
1537
1538 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1539 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1540 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1541 blank.
1542
1543 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1544 Various fixes related to the add_users function. Still not yet finished.
1545 Added things to the TODO list. Lets start using that!
1546
1547 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1548 Added code to x86Template to format newly created partitions. Also added
1549 some error checking code. GLIStorageDevice passes 'minor' with data to
1550 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1551 mounting code.
1552
1553 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1554 Took out unnecessary setting of random livecd root password. the cd already
1555 sets it randomly.
1556
1557 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1558 Took out an unneeded step from CC's run()
1559
1560 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1561 Attempt at detecting and adding windows partitions to lilo.
1562
1563 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1564 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1565 partition. fixed misc exit_status => exitstatus typo.
1566
1567 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1568 Added basic code for resizing filesystems with pyparted. Fixed code for
1569 resizing ntfs and ext2/3.
1570
1571 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1572 Fixed partition() in x86Template so that it scans through logicals and deletes
1573 before deleting containing extended partition. Also clears partition table to
1574 be safe before third pass.
1575
1576 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1577 Added mount_network_shares. not able to test it from this computer.
1578 will test when i get back to school.
1579 also added start_portmap to the client_controller as an always-do.
1580 agaffney says this is needed for NFS mounts to work.
1581
1582 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1583 Partial rewrite of partitioning code in x86Template. No longer shells out to
1584 parted to perform actions, now uses all pyparted calls. Code "works" in a
1585 test, but still needs lots of TLC. Also modified tests/install.py to work
1586 with x86Template and GLIClientConfiguration.
1587
1588 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1589 Initial move of partitioning code from ArchTemplate to x86Template.
1590
1591 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1592 Added grp_install and services to InstallProfile. forgot about the set_root_password
1593
1594 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1595 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1596 Test Install ran very well (skipping partitioning).
1597
1598 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1599 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1600 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1601 some may still have eluded me.
1602
1603 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1604 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1605 Just finished mount_local_partitions in GLIArchitectureTemplate
1606
1607 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1608 Added get_num_sectors() to GLIStorageDevice.
1609
1610 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1611 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1612 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1613 from GLIInstallProfile.
1614
1615 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1616 GLIStorageDevice returns "unknown" instead of "" for get_type()
1617
1618 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1619 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1620 actually work. Commented out resizability checking code for speed.
1621
1622 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1623 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1624 GLIStorageDevice at the suggestion of plors
1625
1626 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1627 Added a function to GLIUtility to pull a value from a make.conf-style config
1628 file. Minor type fix to GLIInstallProfile.py
1629
1630 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1631 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1632 network mounts from partition data structure in GLIInstallProfile
1633
1634 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1635 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1636 can be resized.
1637
1638 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1639 Added some of the final functions to GLIInstallTemplate.
1640 Yes this project is still active despite rare use of the Changelog!
1641
1642 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1643 Added the GLIPartitionTools.py file. This is a temporary insertion of
1644 partitioning tools that will eventually go into their own package.
1645
1646 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1647 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1648 for the program). Added __init__(install_profile, client_configuration) to
1649 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1650 to avoid constantly passing stuff every time we call a method.
1651
1652 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1653
1654 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1655 files without messing up all the other stuff in them. This will be used for making
1656 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1657
1658 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1659
1660 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1661 have a few basic things. I added two private methods. One is _depends(). This
1662 will be used for dependency checking (ie. unpacking a tarball requires that
1663 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1664 same syntax as os.system(), however, instead of being run in the liveCD
1665 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1666 isolated the code. Hope to work more this week to get this class formed...
1667
1668 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1669
1670 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1671 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1672 to allow for easier modification (mutable, rather than immutable objects). Updated
1673 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1674 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1675 Added initial unit test code.
1676
1677 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1678
1679 Added initial changelog. Setting up the basic structure of the CVS repository
1680 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1681 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20