/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1311 - (show annotations) (download)
Mon Feb 20 18:15:17 2006 UTC (8 years, 10 months ago) by agaffney
File size: 69537 byte(s)
grp code fixups

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.601 2006/02/20 18:15:17 agaffney Exp $
5
6
7 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
8 src/GLIPortage.py:
9 add code make GLIPortage.py capable of being run stand-along for dynamic
10 stage3 generation and copying packages in a GRP-ish way
11 grp code fixups
12
13 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
14 src/GLIPortage.py:
15 ignore blank packages passed to get_deps() and emerge()
16
17 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
18 src/GLIUtility.py:
19 add get_chosts() function
20
21 *GLI-0.3 (12 Feb 2006)
22
23 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
24 src/templates/x86ArchitectureTemplate.py:
25 pull old start/end sector values from somewhere that actually has them
26 add logic for extended partition to code that makes sure new end sector
27 doesn't overlap start sector of next partitions
28 don't freak out if partition can't be deleted
29
30 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
31 src/GLIPortage.py:
32 run env-update at the end of copy_pkg_to_chroot()
33
34 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
35 src/templates/x86ArchitectureTemplate.py:
36 I'm a complete fscking dumbass. I recorded the end sector for partitions that
37 weren't being touched, but I never used it when recreating them...the end was
38 calculated from the size in MB instead :/
39
40 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
41 src/GLIArchitectureTemplate.py:
42 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
43 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
44 src/GLIPortage.py:
45 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
46 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
47 'resized' flag
48
49 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
50 src/GLIPortage.py:
51 short circuit and check vdb directly if package begins with '='
52
53 8 Feb 2006; Preston Cody <codeman@gentoo.org>
54 added more packages to extra_packages list in IP
55
56 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
57 src/templates/x86ArchitectureTemplate.py:
58 10 tries to create filesystem instead of 3
59 src/GLIPortage, src/GLIArchitectureTemplate.py:
60 ignore_missing flag for copy_pkg_to_chroot()
61
62 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
63 src/GLIPortage.py:
64 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
65
66 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/net/server/gliserv.py:
68 fix handling of 404 for real files
69 src/net/server/GLIServerProfile.py:
70 look for 'hostname' in attributes instead of 'name'
71
72 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/SimpleXMLParser.py:
74 initial support for 'include' in XML files
75 src/GLIStorageDevice.py:
76 initial support for %
77 src/GLIClientController.py:
78 add debugging statements to pre-install steps
79
80 15 Jan 2006; Preston Cody <codeman@gentoo.org>
81 webgli/configfiles:
82 check for key in etc_files['rc.conf'] to fix key error
83 webgli/timezone: small fix.
84 webgli/extrapackages: list-type fix
85 webgli/services: same
86 glimd: add/edit_client updates.
87
88 12 Jan 2006; Preston Cody <codeman@gentoo.org>
89 added configure.pyhtml to glimd. minor changes
90 to top and add_client. fixed up showargs.
91 added execute.pyhtml
92 changed register clients line in gliserv for name->hostname.
93 updated TODO.
94
95 10 Jan 2006; Preston Cody <codeman@gentoo.org>
96 src/net/server/*:
97 added add/del/edit client/profile.pythml for glimd.
98 updated templates, showclients, and gliserv.
99
100 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
101 src/net/server/*:
102 stupid threading module...
103
104 8 Jan 2006; Preston Cody <codeman@gentoo.org>
105 AT: rc.conf -> conf.d/clock
106
107 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
108 src/GLIPortage.py:
109 show 'Calculating dependencies for ...' in subprogress bar at beginning of
110 emerge()
111 src/GLIArchitectureTemplate.py:
112 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
113 in the chroot
114 remove _quickpkg_deps() and _portage_best_{visible,version}()
115 src/GLIUtility.py:
116 fail immediately in validate_uri() if provided URI can't be parsed
117 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
118 debug code in spawn()
119 use lower-level os.read() instead of file.read() because python sucks
120 src/templates/x86ArchitectureTemplate.py:
121 basic subprogress reporting for partitioning
122 total_steps was 1 too high
123
124 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/GLIUtility.py:
126 move parse_vdb_contents() to GLIPortage
127 src/GLIPortage.py:
128 remove all symlink fixups
129 ignore 'dir' entries in CONTENTS
130 call tar with -p
131
132 5 Jan 2006; Preston Cody <codeman@gentoo.org>
133 AT: bootsplash is now gensplash
134 gliserv: add advanced_mode to shared_info
135 webgli: Added advanced mode. mostly just disables a few screens.
136
137 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
138 src/GLIPortage.py:
139 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
140 added emerge()
141 update sub-progress after each package is emerged
142 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
143 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
144 remove link if it exists before moving content into place
145 src/GLIArchitectureTemplate.py:
146 install_packages() now calls emerge() in GLIPortage
147 change all calls to self._emerge() to self._portage.emerge()
148 comment out all emerge status checking...using exceptions now
149 call copy_pkg_to_chroot() directly for livecd-kernel
150
151 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIArchitectureTemplate.py:
153 remove add_pkg_to_world() and copy_pkg_to_chroot()
154 copy installer.log to installer.log.failed on install failure
155 src/GLIUtility.py:
156 added get_keymaps()
157 spawn() takes any False argument for chroot instead of just None
158 src/GLIPortage.py:
159 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
160 change copy_pkg_to_chroot() to work properly with use_root=False
161 figure PORTAGE_TMPDIR properly
162
163 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
164 src/net/server/html/*:
165 converted showclients, load/saveprofile
166
167 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
168 src/GLIPortage.py:
169 exclude packages already in chroot vdb from binary deplist
170 chroot to use best_version for chroot's vdb
171 src/runtimedeps.py:
172 accept ROOT via commandline instead of env
173
174 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
175 src/runtimedeps.py:
176 remove passing of ROOT
177 src/GLIPortage.py:
178 modify get_deps() to get deptree for each package and merge into final list
179 remove depgraph class
180 add debugging code to get_deps()
181 src/GLIArchitectureTemplate.py:
182 combine code for GRP/compile in install_packages() into one block
183 debugging code in install_packages()
184
185 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
186 src/runtimedeps.py:
187 initial commit
188 src/GLIPortage.py:
189 use separate script for GRP deps
190 remove calls to portage module
191
192 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
193 src/GLIPortage.py:
194 initial commit
195 move some of portage function from GLIAT
196 flipped around a few function args
197 src/GLIArchitectureTemplate.py:
198 revamp install_packages() for new GLIPortage
199
200 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
201 src/GLIArchitectureTemplate.py:
202 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
203
204 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
205 src/net/server/gliserv.py:
206 wrap generated code in a class to isolate it a bit better
207 302 redirects work
208 don't use cgi.escape() for <% %>
209 src/net/server/html/webgli/*:
210 load/save profile
211 src/GLIUtility.py:
212 change /sbin/lspci to just lspci
213
214 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
215 src/GLIClientController.py:
216 change ordering of statements in CC run() while loop to not go past the end
217 of the array
218 src/GLIArchitectureTemplate.py:
219 removed redundant bind mounts
220
221 18 Dec 2005; Preston Cody <codeman@gentoo.org>
222 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
223 added a diagram by blackace from last night.
224 added the glossary in RTF format.
225
226 17 Dec 2005; Preston Cody <codeman@gentoo.org>
227 x86AT: separated out emerge/configure from running of bootloader
228 added MBR drive support to lilo.
229 these changes will likely not work.
230 AT: added setup_and_run_bootloader step.
231
232 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
233 src/net/server/gliserv.py:
234 call generated code in a function
235 src/net/server/html/webgli/*:
236 include top/bottom
237 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
238 src/GLIClientCongifuration.py:
239 install mode magic
240
241 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
242 src/GLIClientController.py:
243 use GLIException when there's an import problem
244 added debug code to show install_steps
245 src/templates/amd64ArchitectureTemplate.py:
246 add . to import path
247 proper path this time: ../../templates
248 src/GLIArchitectureTemplate.py:
249 add _portage_best_version() function
250
251 11 Dec 2005; Preston Cody <codeman@gentoo.org>
252 added initial glossary and gimli diagram to the docs directory.
253 modify gli-dialog to allow editing of the install_profile after loading XML.
254
255 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
256 src/net/server/html/webgli/:
257 converted globaluse, localuse, networkmounts, portagetree, and stageselection
258 moved saveclientconfig stuff into clientconfig
259 moved saveconfigfiles into config files
260 converted etc_portage and makedotconf
261 converted bootloader and kernel
262 convert daemons, extrapackages, networking, review, services, timezone, users
263 src/net/server/gliserv.py:
264 proper 404 handling for .pyhtml extension
265 HTML escape <% %> stuff
266 work around python's sucky regexes
267 src/GLIInstallProfile.py:
268 allow set_{rsync,ftp,http}_proxy() to accept empty values
269
270 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
271 src/net/server/gliserv.py:
272 initial commit of Legolas templating engine
273 302 redirects
274 src/net/server/html/index.html, src/net/server/webgli_template.html:
275 minor changes for new code
276 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
277 initial commit of the conversion from the monolithic WebGLIHandler.py to the
278 one file per path Legolas goodness
279 partitioning[2-4] done
280
281 5 Dec 2005; Preston Cody <codeman@gentoo.org>
282 webgli: dhcp options in CC and post-install.
283 updated comparison chart.
284 webgli: etc/portage/* and distcc support added. not too-well tested.
285
286 4 Dec 2005; Preston Cody <codeman@gentoo.org>
287 webgli_template.html: valign=top on left side.
288 webgli: fix bootloader boot_device. now working.
289 webgli: CC proxy done. post-install proxy in progress.
290
291 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/server/webgli_template.html:
293 increase padding for content cell to 7px and add colspan=2
294
295 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
296 webgli: added graphic bar on top
297 webgli: added hover effects on the links on the left
298 webgli: re-rendered header_bg.png to stretch without artifacts
299
300 3 Dec 2005; Preston Cody <codeman@gentoo.org>
301 webgli: make.conf disabling fixes for dynamic_stage3
302 fixed portage snapshot browse popup
303 all changes tested.
304 webgli: add debug mode to CC screen. the screen still needs lots of work.
305
306 1 Dec 2005; Preston Cody <codeman@gentoo.org>
307 added debug mode question to gli-dialog
308 added CC proxies to CC networking for gli-dialog
309 webgli: fixed skip CC networking if connection active
310 webgli: portage snapshot defaults to CD
311 webgli: bootloader mbr drive selection
312 webgli: USE flags unselectable if dynamic_stage3
313 webgli: manual extra packages and save button.
314
315 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
316 src/GLIUtility.py:
317 change ping count to 2
318 docs/comparison.html
319 initial commit
320
321 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
322 src/templates/x86ArchitectureTemplate.py:
323 fix map() issue with grub code
324 replace kernel_names and initrd_names loops with one-liners
325
326 27 Nov 2005; Preston Cody <codeman@gentoo.org>
327 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
328 initial gli-dialog support for recommended partitioning layout and clear.
329 failure cleanup now an option for gli-dialog.
330 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
331 added comparison list and updated TODO!
332
333 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
334 src/GLIArchitectureTemplate.py:
335 fix to stage1() debug code
336 fix to stage2() debug code
337
338 26 Nov 2005; Preston Cody <codeman@gentoo.org>
339 some more bootloader code fixes. forgot boot_device != mbr_device.
340
341 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
342 src/GLIStorageDevice.py:
343 fix to unallocated space merging when last one is after part 4
344
345 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIArchitectureTemplate.py:
347 small fix to debugging code in copy_pkg_to_chroot()
348
349 23 Nov 2005; Preston Cody <codeman@gentoo.org>
350 more bugfixes with bootloader code
351 gli-dialog side appears to work
352
353 21 Nov 2005; Preston Cody <codeman@gentoo.org>
354 initial adding of boot_device to backend.
355 initial boot_device support added to gli-dialog.
356 some fixes of my poor coding
357
358 20 Nov 2005; Preston Cody <codeman@gentoo.org>
359 converted gli-dialog to use the install_package_list.
360 gtkfe has already been converted by AllanonJL
361 new way working in gli-dialog now and added to webgli.
362 added set/get_boot_device() to IP
363
364 19 Nov 2005; Preston Cody <codeman@gentoo.org>
365 get_install_package_list added to InstallProfile. This can be used by the FEs
366
367 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368 src/templates/x86ArchitectureTemplate.py:
369 call ls with '-1 --color=no'
370
371 16 Nov 2005; Preston Cody <codeman@gentoo.org>
372 added warning (#9) to GRP ppl about stage3 tarballs
373
374 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
375 src/GLIArchitectureTemplate.py:
376 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
377 confused
378
379 13 Nov 2005; Preston Cody <codeman@gentoo.org>
380 removed protocols from rc.conf screens
381 finished initial rc.conf and make.conf in webgli
382
383 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
384 src/net/server/gliserv.py:
385 add -h option to usage()
386 show time and request URI in debug mode
387 show client IP in debug mode
388 just use IP instead of trying to do a reverse lookup
389
390 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
391 src/net/server/gliserv.py:
392 'classier' 401 message
393 proper commandline parsing
394 help via -h
395 user/pass can be specificed via commandline option
396
397 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
398 src/net/server/gliserv.py:
399 basic HTTP auth
400
401 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
402 src/net/server/gliserv.py:
403 dynamic module reloading (yipee!)
404 send 'Last-Modified' header for real files
405 respond to HEAD with just headers
406 src/net/server/handlers/WebGLIHandler.py:
407 icons for drives
408
409 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/server/handlers/WebGLIHandler.py:
411 initial 'pretty' partition table display support
412 clicking partition in 'pretty' display works instead of radio buttons
413 radio buttons and pretty display work together
414 META redirect instead of javascript
415 pretty display stretches across entire screen
416 'Recommended layout' and 'Clear drive' functions
417 properly catch exceptions from do_recommended()
418 src/GLIArchitectureTemplate.py:
419 replace preinst, copy, postinst, rm steps with qmerge
420 whoops...that shouldn't have been commented out
421 create image_dir with -p in copy_pkg_to_chroot()
422 more generic of symlink crappiness
423 new copy_pkg_to_chroot() actually works now
424
425 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
426 src/GLIStorageDevice.py:
427 initial generic disk support
428 fixes for add_partition() code
429 src/net/server/handlers/WebGLIHandler.py:
430 added support for creating generic disks
431 add new partition working
432 save and delete partitions
433
434 6 Nov 2005; Preston Cody <codeman@gentoo.org>
435 webgli: Partitioning making progress.
436
437 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
438 src/GLIArchitectureTemplate.py:
439 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
440 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
441 dir) and works around /etc/gconf symlink problem
442
443 5 Nov 2005; Preston Cody <codeman@gentoo.org>
444 webgli: lots of updates. preliminary partitioning. extra packages works.
445
446 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
447 src/net/server/gliserv.py:
448 httpd now supports HTTPS and falls back to HTTP if not available
449 make fallback actually work
450 src/net/server/SecureXMLRPCServer.py:
451 SecureSocketServer is now threaded
452
453 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
454 src/net/client/gliclient.py:
455 try to use HTTPS for XMLRPC first and fallback to HTTP
456 pretend mode
457 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
458 HTTPS XMLRPC goodness from samyron
459 pass name of certificate
460
461 31 Oct 2005; Preston Cody <codeman@gentoo.org>
462 wegli: daemons and services screens done.
463
464 30 Oct 2005; Preston Cody <codeman@gentoo.org>
465 webgli: networking and users screens
466 added return_redirect to handler.py
467 loading and saving install/client profiles works for webgli now
468 Review also done
469
470 *GLI-0.2 (27 Oct 2005)
471
472 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
473 src/templates/x86ArchitectureTemplate.py:
474 properly check for bootloader emerge exist status with exitsuccess()
475 log output of grub install command
476 add --batch --no-floppy to grub command
477 grubinstallstring only gets logged if debug is on
478 src/GLIUtility.py:
479 update progress bar to 100% when process finishes
480
481 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
482 src/GLIClientController.py:
483 added debugging code for the interaction between the 2 threads via Event()
484 src/GLIUtility.py:
485 doubled the buffer size in spawn()
486 bump buffer size up to 16384
487 only report progress in 5% increments
488 src/GLIArchitectureTemplate.py:
489 kernelpkgs.txt support code
490 above disabled because it sucks
491 added add_pkg_to_world()
492
493 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
494 src/GLIArchitectureTemplate.py:
495 use tar | tar to copy files in copy_pkg_to_chroot()
496 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
497
498 23 Oct 2005; Preston Cody <codeman@gentoo.org>
499 DEBUGGING ADDED TO AT. verbose field added to CConfig.
500
501 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
502 src/net/server/gliserv.py:
503 / maps to index.html
504 look for actual files in html/
505 src/net/html:
506 new template
507 src/GLIUtility.py:
508 added parse_vdb_contents()
509 src/GLIArchitectureTemplate.py:
510 added copy_pkg_to_chroot()
511 added debug code to dynamic-stage3
512 switch dynamic-stage3 to new method
513 lots of bug fixes from adding debug code
514
515 22 Oct 2005; Preston Cody <codeman@gentoo.org>
516 webgli initial bootloader support + changed make.conf.
517 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
518
519 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/GLIUtility.py:
521 horrible tangled mess of code that is tarball unpacking subprogress display
522 add unpack progress to portage snapshot
523 use read() instead of readlines() in spawn()
524 only update progress bar for whole percents
525
526 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
527 src/templates/x86ArchitectureTemplate.py:
528 change call to 'grub' to use GLIUtility.exitsuccess()
529 add definition of 'build_mode' in _configure_lilo()
530 src/misc/updategtkfe, src/misc/updateglid:
531 fix so subshell is called in root shell
532
533 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
534 src/net/server/handlers/WebGLIHandler.py:
535 stage screen launches URI browser in sized window with various properties set
536
537 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
538 src/misc/updategtkfe:
539 updated to actually work
540 remove previous snapshot and extracted dir before downloading
541 src/misc/updateglid:
542 updated to actually work
543 src/templates/x86ArchitectureTemplate.py:
544 fixed bug where grub code was looking for 'root+root+file_name2'
545
546 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
547 src/net/server/handlers/WebGLIHandler.py:
548 URI browser
549 added mirror selection
550 src/GLIUtility.py:
551 ls via ssh strips off ending *
552
553 16 Oct 2005; Preston Cody <codeman@gentoo.org>
554 more updates to webgli. stage selection.
555
556 11 Oct 2005; Preston Cody <codeman@gentoo.org>
557 updated webgli with preliminary Network Mounts support.
558
559 9 Oct 2005; Preston Cody <codeman@gentoo.org>
560 GenDialog: string formatting and yes/no label fixes.
561 added WebGLI template for gliserv.py
562 added WebGLIHandler as well as a definition for it in gliserv.py
563 updates to the webgli files even though they won't be there for long.
564 Utility: remove exception for non-existant grppkgs.txt until the new livecd
565 goes public.
566
567 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
568 src/net/server/gliserv.py:
569 override dict to not be so anal
570 main server now loads separate module to handle requests
571 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
572 split out profile URLs into separate handler function
573 move handlers into subdirectory
574 add Welcome and Clients handlers
575
576 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
577 src/GLIUtility.py:
578 raise exception if password prompt received twice
579
580 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
581 src/GLIUtility.py:
582 removed rot13ify()
583
584 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
585 src/net/server/gliserv.py:
586 allow for param to be passed multiple times in GET
587 no XMLRPC functions return None
588 modify POST request parsing to only create a list if needed
589 fix GET request parsing so the list creation for multiple values works
590 src/net/client/gliclient.py:
591 various typo and type mismatch fixes
592 exit after exception
593
594 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
595 src/net/client/gliclient.py:
596 initial commit
597 pass MAC to XMLRPC functions
598 src/net/server/GLIServerProfile.py:
599 rename GLIClientsProfiles to GLIServerProfile
600
601 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
602 src/net/server/gliserv.py:
603 now handles POST requests
604 move majority of request handling code to common_handler() to reduce code
605 duplication
606 profile loading
607 client reg via XMLRPC goes into SharedInfo()
608 /showclients redesign
609 template fixes
610 allow handler functions to add/change headers
611 save profile
612
613 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
614 src/net/server/GLIClientsProfiles.py:
615 initial commit
616 src/net/server/template.html:
617 initial commit
618 src/net/server/gliserv.py:
619 add template mojo
620
621 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
622 src/net/server/gliserv.py:
623 XMLRPC mojo
624
625 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/GLIArchitectureTemplate.py:
627 add code in _edit_config() to comment line where variable is defined
628 previously
629 insert new line under previous definition of variable if it exists
630 small _edit_config() cleanup
631 src/GLIStorageDevice.py:
632 add clear_partitions() function
633 new sizes for recommended partition layout
634 automatically calculate swap size for recommended layout
635
636 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
637 src/templates/x86ArchitectureTemplate.py:
638 fat16 mojo
639
640 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
641 src/GLIStorageDevice.py:
642 prevent do_recommended() from being run twice
643 rewrite do_recommended() to be more robust
644 src/GLIArchitectureTemplate.py:
645 rework _edit_config() to not write duplicate entries
646
647 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
648 src/GLIStorageDevice.py:
649 added do_recommended() function to automatically created 256M/1G/* layout
650
651 17 Sep 2005; Preston Cody <codeman@gentoo.org>
652 src/gli-dialog.py: added set_distcc to the list
653 GenDialog: added set_distcc. untested.
654 IP: added install_distcc flag.
655 AT: added install_distcc function based on the flag. runs after build_kernel
656 changed AT spawn command for distcc for nodeps.
657
658 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
659 src/GLIUtility.py:
660 add rot13ify() function
661
662 16 Sep 2005; Preston Cody <codeman@gentoo.org>
663 src/GenDialog.py
664 added a sentence of text. unchecking support added.
665
666 15 Sep 2005; Preston Cody <codeman@gentoo.org>
667 src/GLIUtility.py
668 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
669 src/GenDialog.py
670 still working on extra_packages. transformed the list to new format.
671 added GRP indication to list. untested.
672 TODO lists updated.
673 src/fe/dialog/gli-dialog.py
674 spelling mistook.
675
676 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
677 src/GLIUtility.py:
678 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
679
680 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
681 src/GLIUtility.py:
682 add get_directory_listing_from_uri()
683 add http support to above
684 add ftp support to above
685 add scp support to above
686 src/GLIArchitectureTemplate.py:
687 "0" instead of 0 for key of single-element dict passed to _edit_config()
688
689 5 Sep 2005; Preston Cody <codeman@gentoo.org>
690 value_only -> only_value
691
692 3 Sep 2005; Preston Cody <codeman@gentoo.org>
693 gutted out all of etc_portage structure since it is now all handled by
694 etc_files
695
696 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
697 src/GLIArchitectureTemplate.py:
698 install_packages() sends progress update notifications
699 src/templates/x86ArchitectureTemplate.py:
700 increase sleep to 5s between format tries
701 src/GLIClientController.py:
702 pass 'self' to AT instead of 'self._pretend'
703
704 2 Sep 2005; Preston Cody <codeman@gentoo.org>
705 logger -> logger.log in x86AT
706
707 1 Sep 2005; Preston Cody <codeman@gentoo.org>
708 added set_etc_portage to IP. debugging gli-d's support for it.
709
710 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
711 src/templates/x86ArchitectureTemplate.py:
712 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
713
714 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
715 src/GLIArchitectureTemplate.py:
716 add _portage_best_version() function and rework install_packages() to allow
717 for future X of Y tracking
718 Use best_visible instead of best_version
719 tracked down and fixed missing = causing empty install extra packages
720 use = when emerging also
721 quickpkg hokey pokey
722 run _get_packages_to_emerge() again with -pk
723
724 22 Aug 2005; Preston Cody <codeman@gentoo.org>
725 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
726 the end of install_packages.
727 added updateglid to /src/misc
728 updated all core files with new GPL notice and copyright statement.
729
730 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
731 src/GLIUtility.py:
732 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
733 a snapshot in /mnt/cdrom/snapshots/
734 get_snapshot_from_cd() adds file:// at the beginning
735 change calls to extra package special case functions to 'self.blah'
736
737 21 Aug 2005; Preston Cody <codeman@gentoo.org>
738 src/ArchTemplate: changed "voodoo".
739 changed order of portage sync methods. made a fallback to webrsync if
740 normal emerge sync fails.
741 removed get_sources_from_cd because it is obsolete.
742 add special cases to install_packages. remove fatal exception on package
743 install failure b/c the box will still be bootable.
744 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
745 handled in the FEs.
746 src/GenDialog: added a bunch of code for dealing with x11-based packages.
747 awaiting testing.
748
749 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
750 src/GLIStorageDevice.py:
751 global try/except block around fs resizable detection code
752 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
753 install-failed cleanup function
754
755 18 Aug 2005; Preston Cody <codeman@gentoo.org>
756 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
757
758 16 Aug 2005; Preston Cody <codeman@gentoo.org>
759 GLIGenDialog:
760 add drive choices for loaded configs.
761 force snapshot for dynamic_stage3
762 init the snapshoturi input to the cd snapshot if not already selected.
763 if dynamic_stage3, skip the make.conf step.
764 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
765 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
766
767 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
768 src/GLIArchitectureTemplate.py:
769 manually call MAKEDEV in stage3-dynamic code
770 copy /etc/inittab.old to /etc/inittab in chroot
771 src/GLIUtility.py:
772 add beginning of validate_uri() function
773 add file:/// support to validate_uri()
774 single quotes when setting livecd password
775
776 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
777 src/GLIGenDialog.py:
778 change getmountpoint() to get_mountpoint()
779 src/misc/updategtkfe:
780 committed script to automatically download latest snapshot and run gtkfe
781 src/templates/x86ArchitectureTemplate.py:
782 fix _configure_lilo_add_windows() for IP -> GLISD stuff
783 src/GLIArchitectureTemplate.py:
784 give tmp_minor an initial value in mount_local_partitions so that the value
785 remain from the previous drive
786
787 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
788 src/templates/x86ArchitectureTemplate.py:
789 Fix _configure_lilo() for IP using GLISD stuff
790 src/GLIArchitectureTemplate.py:
791 install_cron_daemon() treats "none" specially
792
793 14 Aug 2005; Preston Cody <codeman@gentoo.org>
794 old patch from Steven Mertens to resolve bug #96642
795 numerous asthetic changes to GenDialog, no real functionality changes though.
796 strings renamed for global use if necessary.
797 fix all three parts of bug 102291
798 disable set_etc_portage until fully-written.
799
800 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
801 src/GLIClientController.py:
802 lower-case http/ftp proxy envvars
803
804 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
805 src/GLIClientController.py:
806 log end of pre_install steps to aid in debugging
807 src/templates/x86ArchitectureTemplate.py:
808 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
809
810 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
811 src/GLIArchitectureTemplate.py
812 check to make sure that the device node we're wait for to exist isn't of
813 type 'free'
814
815 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
816 src/GLIGenDialog.py:
817 convert install_packages to list in set_extra_packages()
818 check return code of checklist() call in "Manual" section
819 *actually* fix the first problem
820
821 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
822 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
823 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
824
825 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
826 src/GLIArchitectureTemplate.py:
827 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
828
829 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
830 Add CDATA support to SimpleXMLParser and add utility functions for it.
831
832 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
833 src/GLIArchitectureTemplate.py:
834 Fix case where vixie-cron is specified as a full package atom, as we still
835 don't want to run 'crontab /etc/crontab' for it.
836
837 *GLI-0.1 (3 Aug 2005)
838
839 30 Jul 2005; Preston Cody <codeman@gentoo.org>
840 add scp to list of is_uri() so GenDialog doesn't complain.
841 fixed livecd-kernel bug in bootloader code.
842 fixed gendialog for dynamic_stage3 instead of "networkless"
843 change bootloader to allow for both initrd and initramfs.
844 fix IP for dynamic_stage3.
845 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
846
847 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
848 Added full scp:// URI support to get_uri() in GLIUtility
849 Remove "networkless" from dynamic stage3 if locic.
850 Remove print statement from scp:// code.
851 Change scp code to check for "assword: " instead of "Password:"
852 Fix post-install network code to create net.eth1+ symlink correctly
853 Check to make sure pkg can be split on / and some debugging code
854 Add 2>dev/null to emerge call in _get_packages_to_emerge()
855 SimpleXMLParser handles True/False/None correctly now
856 Comment out above fix
857 Add partitioning wait-for-device-to-exist code to mount_local_partitions
858
859 28 Jul 2005; Scott Myron <samyron@gentoo.org>
860 Removed a FIXME in the GLIClientConfiguration that is no
861 longer needed.
862
863 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
864 Default to x86 in ClientConfig
865 Typo in build-a-stage3 code.
866 Remove MAKEDEV call in build-a-stage3 postscript.
867
868 26 Jul 2005; Preston Cody <codeman@gentoo.org>
869 Rewrote init of IP for gli-d. Other GenDialog updates.
870 allow network_type to be None in CConfig.
871
872 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
873 Add _dynamic_stage3 option to IP.
874 Add check for that option to dynamic stage3 code in ArchTemplate.
875 Fix code to determine default route in get_eth_info() in GLIUtility.
876 Fix serialization of dns-servers in ClientConfig.
877
878 24 Jul 2005; Preston Cody <codeman@gentoo.org>
879 changed default values of cron/logger in IP.
880 moved GenDialog IP init out to the individual files. gli-dialog's version
881 will change quite a bit.
882
883 22 Jul 2005; Preston Cody <codeman@gentoo.org>
884 added ppcArchTemplate. blank now. working on yaboot.
885 modified ArchTemplate for amd64 and ppc custom kernels.
886 skeleton implementation of _configure_yaboot.
887 small fixes to other templates.
888
889 21 Jul 2005; Preston Cody <codeman@gentoo.org>
890 GenDialog updates. changed comment in IP.
891
892 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
893 src/GLIInstallProfile.py:
894 Fix codeman's screwup of changing the service seperator to ',' in the parser
895 without changing it in the serialization code! Also document this in a
896 comment so you find it easier. Everybody needs to make sure they update
897 their install profiles!
898
899 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
900 src/GLIArchitectureTemplate.py:
901 Fix casting of list to string and concat of None with string, as well as
902 commented prototype of checking that mounting actually worked (found a case
903 where mount can return success, but the mount won't be done).
904
905 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
906 src/templates/x86ArchitectureTemplate.py:
907 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
908 checking for the device, and sleeping 1 second each time.
909
910 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
911 src/templates/x86ArchitectureTemplate.py:
912 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
913 bootloader works again. Also rename _install_{grub,lilo} to
914 _configure_{grub,lilo} since they don't install the loaders anymore
915 themselves.
916
917 7 Jul 2005; Preston Cody <codeman@gentoo.org>
918 fix global USE flags to not include the arch types at the end.
919 updates to GenDialog and gli-d.
920
921 6 Jul 2005; Preston Cody <codeman@gentoo.org>
922 fixing bootloader code for no initrd and initrd->initramfs naming change.
923
924 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
925 Proper comments and parameters to GLIException in install_mta()
926 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
927 Add strip() to list_mirrors(), list_subarch_from_mirror() and
928 list_tarball_from_mirror() to eliminate blank last item.
929
930 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
931 Added stage3 generation code.
932
933 5 Jul 2005; Preston Cody <codeman@gentoo.org>
934 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
935 Mild changes to GenDialog.
936
937 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
938 Remove separate install step configure_rc_conf() since it's handled by
939 update_config_files()
940 Make a copy of newvalues in _edit_config() so quotes aren't added when the
941 function is called twice on the same file.
942
943 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
944 Missing \ in sed in _get_packages_to_emerge()
945 Removed explicit emerging of hotplug and no longer add it to the runlevel.
946 Check in _quickpkg_deps() to ignore blank package names returned from
947 _get_packages_to_emerge()
948
949 28 Jun 2005; Preston Cody <codeman@gentoo.org>
950 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
951 in the dialog.py gauge code.
952
953 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
954 Add code to update_config_files() to go through etc_files and update stuff.
955 Check to see that _etc_files['make.conf'] exists in get_make_conf()
956 Only use float() in partition xml parsing code if type == "free"
957
958 28 Jun 2005; Preston Cody <codeman@gentoo.org>
959 finished almost all internationalization of GenDialog.
960 attempt at fixing rc.conf function. moved 3 generate functions out of
961 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
962 added dialog.py to the fe/dialog directory so it actually gets used.
963
964 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
965 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
966
967 27 Jun 2005; Preston Cody <codeman@gentoo.org>
968 fix extra entry in list_mirrors()
969 beginning internationalization runthrough.
970
971 26 Jun 2005; Preston Cody <codeman@gentoo.org>
972 added dialog.py to /src temporarily until it gets accepted upstream.
973 fix for unused value in form in dialog.py and changed heights.
974 fix GenDialog forms.
975
976 25 Jun 2005; Preston Cody <codeman@gentoo.org>
977 Changed hostname/domainname for new baselayout.
978 Changed _add_to_runlevel errors to logs.
979 Updated TODO list to show status of GenDialog
980 More updates to GenDialog including two checklists that probably won't work.
981 update IP to use comma-separated list instead of space separated for services.
982
983 24 Jun 2005; Preston Cody <codeman@gentoo.org>
984 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
985 GenDialog as it gets closer to completion.
986
987 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
988 Modify get_eth_info() to take a full interface name (eth0 fex). float()
989 instead of int() in add_partition_device_partition() for minor (closes 96804)
990
991 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
992 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
993 instead of 'interfaces[interface][1]' since DHCP uses that field for its
994 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
995
996 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Apply spawn() patch from #96644 (with minor changes). Make sure the return
998 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
999 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1000 Fix undefined variable 'output' issue in spawn().
1001
1002 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1003 More updates to GenDialog and gli-d.
1004
1005 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1006 Modify list_mirrors() to return a list of mirror URL/name pairs.
1007
1008 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1009 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1010 get subarch.
1011
1012 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1013 Backend partitioning will create disklabel is none exists. Installprofile
1014 defaults to "" now instead of "msdos" for disklabel type. Fix for
1015 mount_local_partitions() to remember device along with minor in the
1016 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1017 add else block to log unsupported netmount types to mount_network_shares()
1018
1019 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1020 src/GLIArchitectureTemplate.py:
1021 Refactor kernel_compile common stuff, fix 2.4 build process.
1022 src/fe/cli/clife.py:
1023 Logging system.
1024 src/GLIUtility.py, src/GLIStorageDevice.py:
1025 Add comments about re-writes needed for boxes without sysfs.
1026
1027 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1028 src/GLIArchitectureTemplate.py:
1029 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1030 'make dep' call for custom compile. build_mode support for prepare-only and
1031 none types completed. custom compile function chains shell functions in
1032 spawned script, to allow for catching all errors.
1033
1034 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1035 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1036 and GenDialog. other gendialog updates as well. kernel updates untested.
1037
1038 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1039 src/GLIInstallProfile.py:
1040 Change structure of etc-portage stuff. The serialization was broken before my
1041 last commit, and I am the only person that's ever used it. The new schema is
1042 as follows:
1043 <etc-portage>
1044 <file name="package.mask"/>
1045 <file name="package.unmask">
1046 <entry atom="sys-kernel/openmosix-sources"/>
1047 </file>
1048 <file name="package.use">
1049 <entry atom="sys-libs/db">
1050 -java
1051 </entry>
1052 <entry atom="dev-libs/cyrus-sasl">
1053 -ldap
1054 </entry>
1055 </file>
1056 </etc-portage>
1057
1058
1059 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1060 src/GLIInstallProfile.py:
1061 Add new entry for gli-profile/kernel-build-method item. Add missing
1062 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1063 keys in the same order.
1064
1065 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1066 src/GLIArchitectureTemplate.py:
1067 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1068 was repeatedly appended to make.conf.
1069
1070 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1071 src/GLIArchitectureTemplate.py:
1072 Put some Linux-2.6 specific code under a if statement. Store list of
1073 successfully mounted swap device for using swapoff. Add proper error checking
1074 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1075 'file'. Clean up some redundant code (thanks to pychecker).'
1076
1077 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1078 Fix typos: get_extended() instead of get_extended_partition(). Added
1079 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1080 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1081
1082 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1083 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1084 in add_network_interface.
1085
1086 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1087 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1088 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1089 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1090 prepare_chroot.
1091
1092 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1093 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1094 +src/fe/installer-gtk:
1095 Add new automated CLI frontend. Add scripts that are the intended means to
1096 use each frontend.
1097
1098 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1099 src/GLIClientController.py:
1100 Add null type to network config, for cases where the interface is already up
1101 and should not be touched (netboot for example).
1102
1103 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1104 src/GLIArchitectureTemplate.py:
1105 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1106 string!. Try to use binary packages if available by default.
1107
1108 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1109 src/GLIArchitectureTemplate.py:
1110 More error checking for _add_to_runlevel, to ensure that the init script
1111 actually exists before we try to add it. set_services phase must take place
1112 after the package installation, otherwise the init scripts might not exist.
1113 Find the correct init script for the cron and logging daemons, and add that
1114 instead of the package atom.
1115
1116 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1117 src/GLIArchitectureTemplate.py:
1118 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1119 usage of 'file' to 'contents' for the variable name, as it shadows
1120 __builtin__.file.
1121
1122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1123 src/GLIArchitectureTemplate.py:
1124 Add MTA install code, and include MTA install phase. Ensure
1125 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1126 for 'none' kernel config for build_kernel phase. Put kernel_script in
1127 /var/tmp instead of /root for build_kernel phase.
1128
1129 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1130 Rename mta variables to match syslog/cron variables.
1131
1132 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1133 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1134 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1135 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1136 src/templates/.cvsignore, src/tests/.cvsignore:
1137 Refactor partition formatting again to include error checking. Allow 'none'
1138 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1139
1140 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1141 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1142 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1143 only have a single spawn call.
1144
1145 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1146 refixed samyron's fix of set_architecture_template.
1147
1148 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1149 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1150 be executable.
1151
1152 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1153 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1154 error checking when you call set_architecture_template.
1155
1156 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1157 moved the mkfsopts input to the partition options menu instead of the during
1158 the creation process. updated GenDialog to say it supports reiserfs v3.
1159
1160 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1161 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1162 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1163 Add support for other partition types to dialogfe.
1164 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1165 avoid integer overflows and wraparounds.
1166
1167 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1168 Removed start/end from XML output and added mkfsopts to partitioning info.
1169 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1170 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1171 in GLIClientConfiguration. Change from .1 and .9 to constants for
1172 partitioning. Fix free space overwriting bug. Remove a few unused functions
1173 from rewrite. Fix call to get_partition_at()
1174
1175 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1176 Updates to GenDialog and dialogfe.
1177
1178 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1180
1181 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1182 more GenDialog updates to partitioning.
1183
1184 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1185 Indenting issue in GLISD/get_ordered_partition_list.
1186 updates to GenDialog partitioning and added default UTC for timezone in IP.
1187
1188 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1189 Added GLISD.get_model()
1190
1191 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1192 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1193 More updates to GenDialog :)
1194
1195 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1196 Added get_interface_realname() function.
1197
1198 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1199 Added auto-save of CConfig and copying to new /root after install.
1200 yet even more GenDialog updates.
1201
1202 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1203 removed print statement from GLISD. more updates to GenDialog.
1204
1205 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1206 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1207 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1208 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1209 places in GLIClientConfiguration.
1210
1211 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1212 Fix mount_local_partitions(), configure_fstab(), and
1213 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1214 A few more fixes for templates/x86Archtemplate
1215
1216 27 May 2005; Preston Cody <codeman@gentoo.org>
1217 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1218 a work in progress.
1219
1220 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1221 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1222 directly. GLISD can now handle data imported from XML.
1223
1224 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1225 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1226 handle blank (no disklabel) disks.
1227
1228 20 May 2005; Preston Cody <codeman@gentoo.org>
1229 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1230 up, documented, and separated out serialization and grouped all sections.
1231
1232 19 May 2005; Preston Cody <codeman@gentoo.org>
1233 Reorganization of ClientConfiguration and gutting of unused functions.
1234 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1235
1236 18 May 2005; Preston Cody <codeman@gentoo.org>
1237 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1238
1239 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1240 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1241 partitioning. CC serializes install profile to disk and prepare_chroot()
1242 copies it into /mnt/gentoo/root
1243
1244 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1245 Moved URI parsing into new function parse_uri()
1246
1247 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1248 Added XMLParser module.
1249
1250 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1252 Minor fix to is_uri() regex to allow hyphens in hostname.
1253
1254 12 May 2005; Preston Cody <codeman@gentoo.org>
1255 Updated finishing_cleanup for new unmounting method from agaffney.
1256
1257 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Fix GLILogger to use correct time format string. Fix _edit_config() to
1259 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1260 unicode support to is_realstring().
1261
1262 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1263 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1264 return value instead of non-zero. Add code to output a traceback to the
1265 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1266 instead of --nocolor.
1267
1268 10 May 2005; Preston Cody <codeman@gentoo.org>
1269 Added GLIGenDialog.py to make a generic class for the dialog functions that
1270 can be used by both dialogfe and the netfe/be. updated both for new filename.
1271 date changes. 2004->2005.
1272
1273 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1274 Removed 'quiet=True' from spawn() calls
1275
1276 10 May 2005; Preston Cody <codeman@gentoo.org>
1277 Updated GLIUtility with patches from chotchki. Also added documentation
1278
1279 9 May 2005; Preston Cody <codeman@gentoo.org>
1280 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1281 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1282 from bug #89683, mostly touchups.
1283
1284 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1285 GLIStorageDevice cleanup patch from bug #91761
1286
1287 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1288 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1289 _edit_config(). Error logging casts 'error' to str
1290
1291 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1292 Exceptions received in CC are logged before being passed to the FE. Added
1293 code to CC to handle exceptions *not* thrown by the installer itself.
1294
1295 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1296 get_max_mb_for_resize() returns -1 if not self.resizeable
1297
1298 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1299 More dirty rsync hacks :-/
1300
1301 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1302 Patches from chotchki (bug #90325) to improve CC networking. untested.
1303
1304 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1306 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1307 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1308 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1309 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1310 _get_packages_to_emerge()
1311
1312 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1313 Added group-adding code to set_users in ArchTemplate
1314
1315 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1316 Added post-install script code
1317
1318 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1319 Fixed encapsulation issues in GLIClientController (bug #90141)
1320
1321 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 Update resizing code in GLIStorageDevice
1323
1324 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1325 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1326
1327 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Reverted change to ArchTemplate and added support for commented line in old
1329 code.
1330
1331 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1332 Changed _edit_config() to modify value in-place instead of commenting out and
1333 adding the new value to the end of the file.
1334
1335 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1336 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1337 Also updated TODO list.
1338
1339 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1340 Use blackace's one-liner to add comments for all function for use with
1341 pythondoc.
1342
1343 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1344 Moved 'end >= device_sectors' check out of loop to check for next partition's
1345 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1346 Partitioning code now tracks start/end of extended for placing logicals. End
1347 point of logical is now adjusted along with start.
1348
1349 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1351 the way of partitioning from a blank disk. Add int() around access to minor
1352 key in partition information due to new partition code leaving them as float.
1353
1354 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1355 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1356
1357 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1359
1360 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1361 Added support for DHCP options and MAC addresses in the InstallProfile.
1362
1363 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1364 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1365 sed to properly strip out junk.
1366
1367 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1368 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1369 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1370
1371 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1372 Fixed indent problem in GLICController
1373
1374 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1375 Check for disklabel type "loop" and use the device name without a minor.
1376
1377 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Remove /tmp/compile_output.log and /var/log/install.log when install is
1379 complete. Added code to (hopefully) keep 2nd thread running after install.
1380 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1381 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1382 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1383
1384 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1386 when unpacking tarball.
1387
1388 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1389 rewrote filesystem_tools. looks like it works so ripping out all the old
1390 filesystem_tools code.
1391
1392 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1393 Changed the print statements to logging in the partitioning BE code.
1394 the logger may need to be imported to the x86archtemplate. unknown yet.
1395 Added the finishing_cleanup function.
1396 added a fix to the logger from BenUrban
1397
1398 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1399 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1400 URIs. The blank uri check has been commented out.
1401 ripped out error checking of set_services. this is done by _add_to_runlevel.
1402
1403 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1404 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1405
1406 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1407 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1408 the install profile if available. Commented out spawn() debugging prints
1409
1410 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1411 small changes to setup_network_post. moved adding to runlevel of net.x to
1412 after the device gets symlinked. added domainname runlevel command.
1413
1414 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1416 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1417 spawn() call in livecd-kernel code to pass environment variables.
1418 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1419 the install profile if available.
1420
1421 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1422 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1423 to handle installing the livecd kernel into the new system.
1424
1425 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1426 should emerge hotplug and coldplug before adding them to runlevel.
1427
1428 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1429 took chroot out of grub_install command.
1430
1431 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1432 Changed chroot wrapper code in spawn() to write the wrapper the python way
1433 instead of the bash way to avoid quote conflicts. Added
1434 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1435 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1436 as it breaks the piping.
1437
1438 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1439 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1440
1441 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1442 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1443 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1444 GLIInstallProfile.
1445
1446 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1447 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1448 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1449 into /mnt/gentoo in prepare_chroot()
1450
1451 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1452 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1453 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1454 to start/end sectors
1455
1456 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1457 Add 2>&1 to cmd in spawn()
1458
1459 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1460 Modified GLIUtility.exitsuccess() to work with return value from
1461 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1462 creates wrapper script for commands run inside chroot so multiple commands
1463 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1464 for the generated script from spawn()
1465
1466 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1467 Removed default values for stage tarball URI and portage tree URI from
1468 InstallProfile. These should be set by the FEs. also added services step to
1469 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1470 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1471
1472 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1473 Small fix for setting the default gateway. Also added feature to dialogfe.
1474
1475 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1476 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1477
1478 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1479 Fixed a bunch of true -> True typos. lots of em
1480 only write new resolv.conf if there are dns servers listed.
1481
1482 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1483 Commented out 'display_on_tty8=True' in start_portmap()
1484
1485 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1486 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1487
1488 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1489 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1490 lang parameter to __init__()
1491
1492 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1493 updates to TODO list.
1494
1495 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1496 Initial code for quickpkg GRP support. Fix loop to grab packages from
1497 'emerge -p blah'
1498
1499 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1500 check for dhcp in the network stuff and emerge it if it is.
1501 added quickpkg to TODO list
1502
1503 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1504 Changed the raising of 'warning' exceptions to a simple log of the error
1505 so that the installer can continue.
1506
1507 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1508 Some big changes. First, changed most output to display_on_tty8.
1509 Second, added log lines to all templates. Some smaller fixes such as typos.
1510 Also did some cleanups of old commented lines.
1511
1512 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1513 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1514 Undo change with fix. Escaping fix in GLIStorageDevice.py
1515
1516 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1517 more updates to TODO list. hopefully we'll soon start removing items instead
1518 of adding them.
1519
1520 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1521 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1522
1523 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1524 updated TODO list. (again)
1525
1526 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1527 changed output of portmap start to display_on_tty8.
1528 fixed bootloader for udev and multiple kernels
1529 fixed custom kernel config (again)
1530
1531 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1532 changed default value of CC._enable_ssh to True because this is smart.
1533 added code to allow custom kernel .config. may be unstable and break. sorry.
1534
1535 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1536 partition() now waits until after it checks for partition flags before delete
1537 the partitions :P
1538
1539 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1540 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1541 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1542 blank.
1543
1544 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1545 Various fixes related to the add_users function. Still not yet finished.
1546 Added things to the TODO list. Lets start using that!
1547
1548 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1549 Added code to x86Template to format newly created partitions. Also added
1550 some error checking code. GLIStorageDevice passes 'minor' with data to
1551 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1552 mounting code.
1553
1554 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1555 Took out unnecessary setting of random livecd root password. the cd already
1556 sets it randomly.
1557
1558 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1559 Took out an unneeded step from CC's run()
1560
1561 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1562 Attempt at detecting and adding windows partitions to lilo.
1563
1564 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1565 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1566 partition. fixed misc exit_status => exitstatus typo.
1567
1568 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1569 Added basic code for resizing filesystems with pyparted. Fixed code for
1570 resizing ntfs and ext2/3.
1571
1572 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1573 Fixed partition() in x86Template so that it scans through logicals and deletes
1574 before deleting containing extended partition. Also clears partition table to
1575 be safe before third pass.
1576
1577 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1578 Added mount_network_shares. not able to test it from this computer.
1579 will test when i get back to school.
1580 also added start_portmap to the client_controller as an always-do.
1581 agaffney says this is needed for NFS mounts to work.
1582
1583 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1584 Partial rewrite of partitioning code in x86Template. No longer shells out to
1585 parted to perform actions, now uses all pyparted calls. Code "works" in a
1586 test, but still needs lots of TLC. Also modified tests/install.py to work
1587 with x86Template and GLIClientConfiguration.
1588
1589 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1590 Initial move of partitioning code from ArchTemplate to x86Template.
1591
1592 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1593 Added grp_install and services to InstallProfile. forgot about the set_root_password
1594
1595 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1596 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1597 Test Install ran very well (skipping partitioning).
1598
1599 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1600 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1601 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1602 some may still have eluded me.
1603
1604 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1605 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1606 Just finished mount_local_partitions in GLIArchitectureTemplate
1607
1608 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1609 Added get_num_sectors() to GLIStorageDevice.
1610
1611 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1612 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1613 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1614 from GLIInstallProfile.
1615
1616 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1617 GLIStorageDevice returns "unknown" instead of "" for get_type()
1618
1619 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1620 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1621 actually work. Commented out resizability checking code for speed.
1622
1623 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1624 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1625 GLIStorageDevice at the suggestion of plors
1626
1627 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1628 Added a function to GLIUtility to pull a value from a make.conf-style config
1629 file. Minor type fix to GLIInstallProfile.py
1630
1631 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1632 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1633 network mounts from partition data structure in GLIInstallProfile
1634
1635 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1636 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1637 can be resized.
1638
1639 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1640 Added some of the final functions to GLIInstallTemplate.
1641 Yes this project is still active despite rare use of the Changelog!
1642
1643 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1644 Added the GLIPartitionTools.py file. This is a temporary insertion of
1645 partitioning tools that will eventually go into their own package.
1646
1647 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1648 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1649 for the program). Added __init__(install_profile, client_configuration) to
1650 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1651 to avoid constantly passing stuff every time we call a method.
1652
1653 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1654
1655 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1656 files without messing up all the other stuff in them. This will be used for making
1657 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1658
1659 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1660
1661 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1662 have a few basic things. I added two private methods. One is _depends(). This
1663 will be used for dependency checking (ie. unpacking a tarball requires that
1664 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1665 same syntax as os.system(), however, instead of being run in the liveCD
1666 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1667 isolated the code. Hope to work more this week to get this class formed...
1668
1669 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1670
1671 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1672 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1673 to allow for easier modification (mutable, rather than immutable objects). Updated
1674 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1675 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1676 Added initial unit test code.
1677
1678 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1679
1680 Added initial changelog. Setting up the basic structure of the CVS repository
1681 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1682 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20