/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1314 - (show annotations) (download)
Mon Feb 27 20:35:34 2006 UTC (8 years, 6 months ago) by agaffney
File size: 69809 byte(s)
  src/GLIPortage.py:
  copy_pkg_to_chroot() uses compile_output.log for command output

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.603 2006/02/27 20:35:34 agaffney Exp $
5
6 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIPortage.py:
8 copy_pkg_to_chroot() uses compile_output.log for command output
9
10 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
11 only keep a 1000 line 'scrollback' buffer for the compile output and log file
12
13 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
14 src/GLIPortage.py:
15 add code make GLIPortage.py capable of being run stand-along for dynamic
16 stage3 generation and copying packages in a GRP-ish way
17 grp code fixups
18
19 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/GLIPortage.py:
21 ignore blank packages passed to get_deps() and emerge()
22
23 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIUtility.py:
25 add get_chosts() function
26
27 *GLI-0.3 (12 Feb 2006)
28
29 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
30 src/templates/x86ArchitectureTemplate.py:
31 pull old start/end sector values from somewhere that actually has them
32 add logic for extended partition to code that makes sure new end sector
33 doesn't overlap start sector of next partitions
34 don't freak out if partition can't be deleted
35
36 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
37 src/GLIPortage.py:
38 run env-update at the end of copy_pkg_to_chroot()
39
40 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
41 src/templates/x86ArchitectureTemplate.py:
42 I'm a complete fscking dumbass. I recorded the end sector for partitions that
43 weren't being touched, but I never used it when recreating them...the end was
44 calculated from the size in MB instead :/
45
46 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47 src/GLIArchitectureTemplate.py:
48 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
49 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
50 src/GLIPortage.py:
51 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
52 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
53 'resized' flag
54
55 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIPortage.py:
57 short circuit and check vdb directly if package begins with '='
58
59 8 Feb 2006; Preston Cody <codeman@gentoo.org>
60 added more packages to extra_packages list in IP
61
62 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
63 src/templates/x86ArchitectureTemplate.py:
64 10 tries to create filesystem instead of 3
65 src/GLIPortage, src/GLIArchitectureTemplate.py:
66 ignore_missing flag for copy_pkg_to_chroot()
67
68 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
69 src/GLIPortage.py:
70 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
71
72 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/net/server/gliserv.py:
74 fix handling of 404 for real files
75 src/net/server/GLIServerProfile.py:
76 look for 'hostname' in attributes instead of 'name'
77
78 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
79 src/SimpleXMLParser.py:
80 initial support for 'include' in XML files
81 src/GLIStorageDevice.py:
82 initial support for %
83 src/GLIClientController.py:
84 add debugging statements to pre-install steps
85
86 15 Jan 2006; Preston Cody <codeman@gentoo.org>
87 webgli/configfiles:
88 check for key in etc_files['rc.conf'] to fix key error
89 webgli/timezone: small fix.
90 webgli/extrapackages: list-type fix
91 webgli/services: same
92 glimd: add/edit_client updates.
93
94 12 Jan 2006; Preston Cody <codeman@gentoo.org>
95 added configure.pyhtml to glimd. minor changes
96 to top and add_client. fixed up showargs.
97 added execute.pyhtml
98 changed register clients line in gliserv for name->hostname.
99 updated TODO.
100
101 10 Jan 2006; Preston Cody <codeman@gentoo.org>
102 src/net/server/*:
103 added add/del/edit client/profile.pythml for glimd.
104 updated templates, showclients, and gliserv.
105
106 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
107 src/net/server/*:
108 stupid threading module...
109
110 8 Jan 2006; Preston Cody <codeman@gentoo.org>
111 AT: rc.conf -> conf.d/clock
112
113 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
114 src/GLIPortage.py:
115 show 'Calculating dependencies for ...' in subprogress bar at beginning of
116 emerge()
117 src/GLIArchitectureTemplate.py:
118 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
119 in the chroot
120 remove _quickpkg_deps() and _portage_best_{visible,version}()
121 src/GLIUtility.py:
122 fail immediately in validate_uri() if provided URI can't be parsed
123 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
124 debug code in spawn()
125 use lower-level os.read() instead of file.read() because python sucks
126 src/templates/x86ArchitectureTemplate.py:
127 basic subprogress reporting for partitioning
128 total_steps was 1 too high
129
130 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
131 src/GLIUtility.py:
132 move parse_vdb_contents() to GLIPortage
133 src/GLIPortage.py:
134 remove all symlink fixups
135 ignore 'dir' entries in CONTENTS
136 call tar with -p
137
138 5 Jan 2006; Preston Cody <codeman@gentoo.org>
139 AT: bootsplash is now gensplash
140 gliserv: add advanced_mode to shared_info
141 webgli: Added advanced mode. mostly just disables a few screens.
142
143 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
144 src/GLIPortage.py:
145 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
146 added emerge()
147 update sub-progress after each package is emerged
148 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
149 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
150 remove link if it exists before moving content into place
151 src/GLIArchitectureTemplate.py:
152 install_packages() now calls emerge() in GLIPortage
153 change all calls to self._emerge() to self._portage.emerge()
154 comment out all emerge status checking...using exceptions now
155 call copy_pkg_to_chroot() directly for livecd-kernel
156
157 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
158 src/GLIArchitectureTemplate.py:
159 remove add_pkg_to_world() and copy_pkg_to_chroot()
160 copy installer.log to installer.log.failed on install failure
161 src/GLIUtility.py:
162 added get_keymaps()
163 spawn() takes any False argument for chroot instead of just None
164 src/GLIPortage.py:
165 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
166 change copy_pkg_to_chroot() to work properly with use_root=False
167 figure PORTAGE_TMPDIR properly
168
169 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
170 src/net/server/html/*:
171 converted showclients, load/saveprofile
172
173 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIPortage.py:
175 exclude packages already in chroot vdb from binary deplist
176 chroot to use best_version for chroot's vdb
177 src/runtimedeps.py:
178 accept ROOT via commandline instead of env
179
180 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
181 src/runtimedeps.py:
182 remove passing of ROOT
183 src/GLIPortage.py:
184 modify get_deps() to get deptree for each package and merge into final list
185 remove depgraph class
186 add debugging code to get_deps()
187 src/GLIArchitectureTemplate.py:
188 combine code for GRP/compile in install_packages() into one block
189 debugging code in install_packages()
190
191 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
192 src/runtimedeps.py:
193 initial commit
194 src/GLIPortage.py:
195 use separate script for GRP deps
196 remove calls to portage module
197
198 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
199 src/GLIPortage.py:
200 initial commit
201 move some of portage function from GLIAT
202 flipped around a few function args
203 src/GLIArchitectureTemplate.py:
204 revamp install_packages() for new GLIPortage
205
206 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
207 src/GLIArchitectureTemplate.py:
208 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
209
210 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
211 src/net/server/gliserv.py:
212 wrap generated code in a class to isolate it a bit better
213 302 redirects work
214 don't use cgi.escape() for <% %>
215 src/net/server/html/webgli/*:
216 load/save profile
217 src/GLIUtility.py:
218 change /sbin/lspci to just lspci
219
220 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
221 src/GLIClientController.py:
222 change ordering of statements in CC run() while loop to not go past the end
223 of the array
224 src/GLIArchitectureTemplate.py:
225 removed redundant bind mounts
226
227 18 Dec 2005; Preston Cody <codeman@gentoo.org>
228 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
229 added a diagram by blackace from last night.
230 added the glossary in RTF format.
231
232 17 Dec 2005; Preston Cody <codeman@gentoo.org>
233 x86AT: separated out emerge/configure from running of bootloader
234 added MBR drive support to lilo.
235 these changes will likely not work.
236 AT: added setup_and_run_bootloader step.
237
238 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
239 src/net/server/gliserv.py:
240 call generated code in a function
241 src/net/server/html/webgli/*:
242 include top/bottom
243 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
244 src/GLIClientCongifuration.py:
245 install mode magic
246
247 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
248 src/GLIClientController.py:
249 use GLIException when there's an import problem
250 added debug code to show install_steps
251 src/templates/amd64ArchitectureTemplate.py:
252 add . to import path
253 proper path this time: ../../templates
254 src/GLIArchitectureTemplate.py:
255 add _portage_best_version() function
256
257 11 Dec 2005; Preston Cody <codeman@gentoo.org>
258 added initial glossary and gimli diagram to the docs directory.
259 modify gli-dialog to allow editing of the install_profile after loading XML.
260
261 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
262 src/net/server/html/webgli/:
263 converted globaluse, localuse, networkmounts, portagetree, and stageselection
264 moved saveclientconfig stuff into clientconfig
265 moved saveconfigfiles into config files
266 converted etc_portage and makedotconf
267 converted bootloader and kernel
268 convert daemons, extrapackages, networking, review, services, timezone, users
269 src/net/server/gliserv.py:
270 proper 404 handling for .pyhtml extension
271 HTML escape <% %> stuff
272 work around python's sucky regexes
273 src/GLIInstallProfile.py:
274 allow set_{rsync,ftp,http}_proxy() to accept empty values
275
276 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
277 src/net/server/gliserv.py:
278 initial commit of Legolas templating engine
279 302 redirects
280 src/net/server/html/index.html, src/net/server/webgli_template.html:
281 minor changes for new code
282 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
283 initial commit of the conversion from the monolithic WebGLIHandler.py to the
284 one file per path Legolas goodness
285 partitioning[2-4] done
286
287 5 Dec 2005; Preston Cody <codeman@gentoo.org>
288 webgli: dhcp options in CC and post-install.
289 updated comparison chart.
290 webgli: etc/portage/* and distcc support added. not too-well tested.
291
292 4 Dec 2005; Preston Cody <codeman@gentoo.org>
293 webgli_template.html: valign=top on left side.
294 webgli: fix bootloader boot_device. now working.
295 webgli: CC proxy done. post-install proxy in progress.
296
297 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
298 src/net/server/webgli_template.html:
299 increase padding for content cell to 7px and add colspan=2
300
301 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
302 webgli: added graphic bar on top
303 webgli: added hover effects on the links on the left
304 webgli: re-rendered header_bg.png to stretch without artifacts
305
306 3 Dec 2005; Preston Cody <codeman@gentoo.org>
307 webgli: make.conf disabling fixes for dynamic_stage3
308 fixed portage snapshot browse popup
309 all changes tested.
310 webgli: add debug mode to CC screen. the screen still needs lots of work.
311
312 1 Dec 2005; Preston Cody <codeman@gentoo.org>
313 added debug mode question to gli-dialog
314 added CC proxies to CC networking for gli-dialog
315 webgli: fixed skip CC networking if connection active
316 webgli: portage snapshot defaults to CD
317 webgli: bootloader mbr drive selection
318 webgli: USE flags unselectable if dynamic_stage3
319 webgli: manual extra packages and save button.
320
321 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
322 src/GLIUtility.py:
323 change ping count to 2
324 docs/comparison.html
325 initial commit
326
327 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
328 src/templates/x86ArchitectureTemplate.py:
329 fix map() issue with grub code
330 replace kernel_names and initrd_names loops with one-liners
331
332 27 Nov 2005; Preston Cody <codeman@gentoo.org>
333 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
334 initial gli-dialog support for recommended partitioning layout and clear.
335 failure cleanup now an option for gli-dialog.
336 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
337 added comparison list and updated TODO!
338
339 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
340 src/GLIArchitectureTemplate.py:
341 fix to stage1() debug code
342 fix to stage2() debug code
343
344 26 Nov 2005; Preston Cody <codeman@gentoo.org>
345 some more bootloader code fixes. forgot boot_device != mbr_device.
346
347 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
348 src/GLIStorageDevice.py:
349 fix to unallocated space merging when last one is after part 4
350
351 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352 src/GLIArchitectureTemplate.py:
353 small fix to debugging code in copy_pkg_to_chroot()
354
355 23 Nov 2005; Preston Cody <codeman@gentoo.org>
356 more bugfixes with bootloader code
357 gli-dialog side appears to work
358
359 21 Nov 2005; Preston Cody <codeman@gentoo.org>
360 initial adding of boot_device to backend.
361 initial boot_device support added to gli-dialog.
362 some fixes of my poor coding
363
364 20 Nov 2005; Preston Cody <codeman@gentoo.org>
365 converted gli-dialog to use the install_package_list.
366 gtkfe has already been converted by AllanonJL
367 new way working in gli-dialog now and added to webgli.
368 added set/get_boot_device() to IP
369
370 19 Nov 2005; Preston Cody <codeman@gentoo.org>
371 get_install_package_list added to InstallProfile. This can be used by the FEs
372
373 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
374 src/templates/x86ArchitectureTemplate.py:
375 call ls with '-1 --color=no'
376
377 16 Nov 2005; Preston Cody <codeman@gentoo.org>
378 added warning (#9) to GRP ppl about stage3 tarballs
379
380 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
381 src/GLIArchitectureTemplate.py:
382 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
383 confused
384
385 13 Nov 2005; Preston Cody <codeman@gentoo.org>
386 removed protocols from rc.conf screens
387 finished initial rc.conf and make.conf in webgli
388
389 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
390 src/net/server/gliserv.py:
391 add -h option to usage()
392 show time and request URI in debug mode
393 show client IP in debug mode
394 just use IP instead of trying to do a reverse lookup
395
396 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
397 src/net/server/gliserv.py:
398 'classier' 401 message
399 proper commandline parsing
400 help via -h
401 user/pass can be specificed via commandline option
402
403 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
404 src/net/server/gliserv.py:
405 basic HTTP auth
406
407 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
408 src/net/server/gliserv.py:
409 dynamic module reloading (yipee!)
410 send 'Last-Modified' header for real files
411 respond to HEAD with just headers
412 src/net/server/handlers/WebGLIHandler.py:
413 icons for drives
414
415 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
416 src/net/server/handlers/WebGLIHandler.py:
417 initial 'pretty' partition table display support
418 clicking partition in 'pretty' display works instead of radio buttons
419 radio buttons and pretty display work together
420 META redirect instead of javascript
421 pretty display stretches across entire screen
422 'Recommended layout' and 'Clear drive' functions
423 properly catch exceptions from do_recommended()
424 src/GLIArchitectureTemplate.py:
425 replace preinst, copy, postinst, rm steps with qmerge
426 whoops...that shouldn't have been commented out
427 create image_dir with -p in copy_pkg_to_chroot()
428 more generic of symlink crappiness
429 new copy_pkg_to_chroot() actually works now
430
431 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
432 src/GLIStorageDevice.py:
433 initial generic disk support
434 fixes for add_partition() code
435 src/net/server/handlers/WebGLIHandler.py:
436 added support for creating generic disks
437 add new partition working
438 save and delete partitions
439
440 6 Nov 2005; Preston Cody <codeman@gentoo.org>
441 webgli: Partitioning making progress.
442
443 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
444 src/GLIArchitectureTemplate.py:
445 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
446 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
447 dir) and works around /etc/gconf symlink problem
448
449 5 Nov 2005; Preston Cody <codeman@gentoo.org>
450 webgli: lots of updates. preliminary partitioning. extra packages works.
451
452 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
453 src/net/server/gliserv.py:
454 httpd now supports HTTPS and falls back to HTTP if not available
455 make fallback actually work
456 src/net/server/SecureXMLRPCServer.py:
457 SecureSocketServer is now threaded
458
459 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
460 src/net/client/gliclient.py:
461 try to use HTTPS for XMLRPC first and fallback to HTTP
462 pretend mode
463 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
464 HTTPS XMLRPC goodness from samyron
465 pass name of certificate
466
467 31 Oct 2005; Preston Cody <codeman@gentoo.org>
468 wegli: daemons and services screens done.
469
470 30 Oct 2005; Preston Cody <codeman@gentoo.org>
471 webgli: networking and users screens
472 added return_redirect to handler.py
473 loading and saving install/client profiles works for webgli now
474 Review also done
475
476 *GLI-0.2 (27 Oct 2005)
477
478 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
479 src/templates/x86ArchitectureTemplate.py:
480 properly check for bootloader emerge exist status with exitsuccess()
481 log output of grub install command
482 add --batch --no-floppy to grub command
483 grubinstallstring only gets logged if debug is on
484 src/GLIUtility.py:
485 update progress bar to 100% when process finishes
486
487 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
488 src/GLIClientController.py:
489 added debugging code for the interaction between the 2 threads via Event()
490 src/GLIUtility.py:
491 doubled the buffer size in spawn()
492 bump buffer size up to 16384
493 only report progress in 5% increments
494 src/GLIArchitectureTemplate.py:
495 kernelpkgs.txt support code
496 above disabled because it sucks
497 added add_pkg_to_world()
498
499 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
500 src/GLIArchitectureTemplate.py:
501 use tar | tar to copy files in copy_pkg_to_chroot()
502 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
503
504 23 Oct 2005; Preston Cody <codeman@gentoo.org>
505 DEBUGGING ADDED TO AT. verbose field added to CConfig.
506
507 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
508 src/net/server/gliserv.py:
509 / maps to index.html
510 look for actual files in html/
511 src/net/html:
512 new template
513 src/GLIUtility.py:
514 added parse_vdb_contents()
515 src/GLIArchitectureTemplate.py:
516 added copy_pkg_to_chroot()
517 added debug code to dynamic-stage3
518 switch dynamic-stage3 to new method
519 lots of bug fixes from adding debug code
520
521 22 Oct 2005; Preston Cody <codeman@gentoo.org>
522 webgli initial bootloader support + changed make.conf.
523 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
524
525 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/GLIUtility.py:
527 horrible tangled mess of code that is tarball unpacking subprogress display
528 add unpack progress to portage snapshot
529 use read() instead of readlines() in spawn()
530 only update progress bar for whole percents
531
532 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
533 src/templates/x86ArchitectureTemplate.py:
534 change call to 'grub' to use GLIUtility.exitsuccess()
535 add definition of 'build_mode' in _configure_lilo()
536 src/misc/updategtkfe, src/misc/updateglid:
537 fix so subshell is called in root shell
538
539 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540 src/net/server/handlers/WebGLIHandler.py:
541 stage screen launches URI browser in sized window with various properties set
542
543 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
544 src/misc/updategtkfe:
545 updated to actually work
546 remove previous snapshot and extracted dir before downloading
547 src/misc/updateglid:
548 updated to actually work
549 src/templates/x86ArchitectureTemplate.py:
550 fixed bug where grub code was looking for 'root+root+file_name2'
551
552 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/net/server/handlers/WebGLIHandler.py:
554 URI browser
555 added mirror selection
556 src/GLIUtility.py:
557 ls via ssh strips off ending *
558
559 16 Oct 2005; Preston Cody <codeman@gentoo.org>
560 more updates to webgli. stage selection.
561
562 11 Oct 2005; Preston Cody <codeman@gentoo.org>
563 updated webgli with preliminary Network Mounts support.
564
565 9 Oct 2005; Preston Cody <codeman@gentoo.org>
566 GenDialog: string formatting and yes/no label fixes.
567 added WebGLI template for gliserv.py
568 added WebGLIHandler as well as a definition for it in gliserv.py
569 updates to the webgli files even though they won't be there for long.
570 Utility: remove exception for non-existant grppkgs.txt until the new livecd
571 goes public.
572
573 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
574 src/net/server/gliserv.py:
575 override dict to not be so anal
576 main server now loads separate module to handle requests
577 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
578 split out profile URLs into separate handler function
579 move handlers into subdirectory
580 add Welcome and Clients handlers
581
582 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
583 src/GLIUtility.py:
584 raise exception if password prompt received twice
585
586 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
587 src/GLIUtility.py:
588 removed rot13ify()
589
590 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/net/server/gliserv.py:
592 allow for param to be passed multiple times in GET
593 no XMLRPC functions return None
594 modify POST request parsing to only create a list if needed
595 fix GET request parsing so the list creation for multiple values works
596 src/net/client/gliclient.py:
597 various typo and type mismatch fixes
598 exit after exception
599
600 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
601 src/net/client/gliclient.py:
602 initial commit
603 pass MAC to XMLRPC functions
604 src/net/server/GLIServerProfile.py:
605 rename GLIClientsProfiles to GLIServerProfile
606
607 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
608 src/net/server/gliserv.py:
609 now handles POST requests
610 move majority of request handling code to common_handler() to reduce code
611 duplication
612 profile loading
613 client reg via XMLRPC goes into SharedInfo()
614 /showclients redesign
615 template fixes
616 allow handler functions to add/change headers
617 save profile
618
619 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
620 src/net/server/GLIClientsProfiles.py:
621 initial commit
622 src/net/server/template.html:
623 initial commit
624 src/net/server/gliserv.py:
625 add template mojo
626
627 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
628 src/net/server/gliserv.py:
629 XMLRPC mojo
630
631 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
632 src/GLIArchitectureTemplate.py:
633 add code in _edit_config() to comment line where variable is defined
634 previously
635 insert new line under previous definition of variable if it exists
636 small _edit_config() cleanup
637 src/GLIStorageDevice.py:
638 add clear_partitions() function
639 new sizes for recommended partition layout
640 automatically calculate swap size for recommended layout
641
642 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
643 src/templates/x86ArchitectureTemplate.py:
644 fat16 mojo
645
646 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
647 src/GLIStorageDevice.py:
648 prevent do_recommended() from being run twice
649 rewrite do_recommended() to be more robust
650 src/GLIArchitectureTemplate.py:
651 rework _edit_config() to not write duplicate entries
652
653 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
654 src/GLIStorageDevice.py:
655 added do_recommended() function to automatically created 256M/1G/* layout
656
657 17 Sep 2005; Preston Cody <codeman@gentoo.org>
658 src/gli-dialog.py: added set_distcc to the list
659 GenDialog: added set_distcc. untested.
660 IP: added install_distcc flag.
661 AT: added install_distcc function based on the flag. runs after build_kernel
662 changed AT spawn command for distcc for nodeps.
663
664 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
665 src/GLIUtility.py:
666 add rot13ify() function
667
668 16 Sep 2005; Preston Cody <codeman@gentoo.org>
669 src/GenDialog.py
670 added a sentence of text. unchecking support added.
671
672 15 Sep 2005; Preston Cody <codeman@gentoo.org>
673 src/GLIUtility.py
674 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
675 src/GenDialog.py
676 still working on extra_packages. transformed the list to new format.
677 added GRP indication to list. untested.
678 TODO lists updated.
679 src/fe/dialog/gli-dialog.py
680 spelling mistook.
681
682 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
683 src/GLIUtility.py:
684 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
685
686 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
687 src/GLIUtility.py:
688 add get_directory_listing_from_uri()
689 add http support to above
690 add ftp support to above
691 add scp support to above
692 src/GLIArchitectureTemplate.py:
693 "0" instead of 0 for key of single-element dict passed to _edit_config()
694
695 5 Sep 2005; Preston Cody <codeman@gentoo.org>
696 value_only -> only_value
697
698 3 Sep 2005; Preston Cody <codeman@gentoo.org>
699 gutted out all of etc_portage structure since it is now all handled by
700 etc_files
701
702 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
703 src/GLIArchitectureTemplate.py:
704 install_packages() sends progress update notifications
705 src/templates/x86ArchitectureTemplate.py:
706 increase sleep to 5s between format tries
707 src/GLIClientController.py:
708 pass 'self' to AT instead of 'self._pretend'
709
710 2 Sep 2005; Preston Cody <codeman@gentoo.org>
711 logger -> logger.log in x86AT
712
713 1 Sep 2005; Preston Cody <codeman@gentoo.org>
714 added set_etc_portage to IP. debugging gli-d's support for it.
715
716 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
717 src/templates/x86ArchitectureTemplate.py:
718 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
719
720 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
721 src/GLIArchitectureTemplate.py:
722 add _portage_best_version() function and rework install_packages() to allow
723 for future X of Y tracking
724 Use best_visible instead of best_version
725 tracked down and fixed missing = causing empty install extra packages
726 use = when emerging also
727 quickpkg hokey pokey
728 run _get_packages_to_emerge() again with -pk
729
730 22 Aug 2005; Preston Cody <codeman@gentoo.org>
731 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
732 the end of install_packages.
733 added updateglid to /src/misc
734 updated all core files with new GPL notice and copyright statement.
735
736 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
737 src/GLIUtility.py:
738 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
739 a snapshot in /mnt/cdrom/snapshots/
740 get_snapshot_from_cd() adds file:// at the beginning
741 change calls to extra package special case functions to 'self.blah'
742
743 21 Aug 2005; Preston Cody <codeman@gentoo.org>
744 src/ArchTemplate: changed "voodoo".
745 changed order of portage sync methods. made a fallback to webrsync if
746 normal emerge sync fails.
747 removed get_sources_from_cd because it is obsolete.
748 add special cases to install_packages. remove fatal exception on package
749 install failure b/c the box will still be bootable.
750 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
751 handled in the FEs.
752 src/GenDialog: added a bunch of code for dealing with x11-based packages.
753 awaiting testing.
754
755 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
756 src/GLIStorageDevice.py:
757 global try/except block around fs resizable detection code
758 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
759 install-failed cleanup function
760
761 18 Aug 2005; Preston Cody <codeman@gentoo.org>
762 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
763
764 16 Aug 2005; Preston Cody <codeman@gentoo.org>
765 GLIGenDialog:
766 add drive choices for loaded configs.
767 force snapshot for dynamic_stage3
768 init the snapshoturi input to the cd snapshot if not already selected.
769 if dynamic_stage3, skip the make.conf step.
770 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
771 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
772
773 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
774 src/GLIArchitectureTemplate.py:
775 manually call MAKEDEV in stage3-dynamic code
776 copy /etc/inittab.old to /etc/inittab in chroot
777 src/GLIUtility.py:
778 add beginning of validate_uri() function
779 add file:/// support to validate_uri()
780 single quotes when setting livecd password
781
782 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
783 src/GLIGenDialog.py:
784 change getmountpoint() to get_mountpoint()
785 src/misc/updategtkfe:
786 committed script to automatically download latest snapshot and run gtkfe
787 src/templates/x86ArchitectureTemplate.py:
788 fix _configure_lilo_add_windows() for IP -> GLISD stuff
789 src/GLIArchitectureTemplate.py:
790 give tmp_minor an initial value in mount_local_partitions so that the value
791 remain from the previous drive
792
793 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/templates/x86ArchitectureTemplate.py:
795 Fix _configure_lilo() for IP using GLISD stuff
796 src/GLIArchitectureTemplate.py:
797 install_cron_daemon() treats "none" specially
798
799 14 Aug 2005; Preston Cody <codeman@gentoo.org>
800 old patch from Steven Mertens to resolve bug #96642
801 numerous asthetic changes to GenDialog, no real functionality changes though.
802 strings renamed for global use if necessary.
803 fix all three parts of bug 102291
804 disable set_etc_portage until fully-written.
805
806 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
807 src/GLIClientController.py:
808 lower-case http/ftp proxy envvars
809
810 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
811 src/GLIClientController.py:
812 log end of pre_install steps to aid in debugging
813 src/templates/x86ArchitectureTemplate.py:
814 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
815
816 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
817 src/GLIArchitectureTemplate.py
818 check to make sure that the device node we're wait for to exist isn't of
819 type 'free'
820
821 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
822 src/GLIGenDialog.py:
823 convert install_packages to list in set_extra_packages()
824 check return code of checklist() call in "Manual" section
825 *actually* fix the first problem
826
827 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
828 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
829 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
830
831 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
832 src/GLIArchitectureTemplate.py:
833 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
834
835 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
836 Add CDATA support to SimpleXMLParser and add utility functions for it.
837
838 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
839 src/GLIArchitectureTemplate.py:
840 Fix case where vixie-cron is specified as a full package atom, as we still
841 don't want to run 'crontab /etc/crontab' for it.
842
843 *GLI-0.1 (3 Aug 2005)
844
845 30 Jul 2005; Preston Cody <codeman@gentoo.org>
846 add scp to list of is_uri() so GenDialog doesn't complain.
847 fixed livecd-kernel bug in bootloader code.
848 fixed gendialog for dynamic_stage3 instead of "networkless"
849 change bootloader to allow for both initrd and initramfs.
850 fix IP for dynamic_stage3.
851 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
852
853 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
854 Added full scp:// URI support to get_uri() in GLIUtility
855 Remove "networkless" from dynamic stage3 if locic.
856 Remove print statement from scp:// code.
857 Change scp code to check for "assword: " instead of "Password:"
858 Fix post-install network code to create net.eth1+ symlink correctly
859 Check to make sure pkg can be split on / and some debugging code
860 Add 2>dev/null to emerge call in _get_packages_to_emerge()
861 SimpleXMLParser handles True/False/None correctly now
862 Comment out above fix
863 Add partitioning wait-for-device-to-exist code to mount_local_partitions
864
865 28 Jul 2005; Scott Myron <samyron@gentoo.org>
866 Removed a FIXME in the GLIClientConfiguration that is no
867 longer needed.
868
869 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
870 Default to x86 in ClientConfig
871 Typo in build-a-stage3 code.
872 Remove MAKEDEV call in build-a-stage3 postscript.
873
874 26 Jul 2005; Preston Cody <codeman@gentoo.org>
875 Rewrote init of IP for gli-d. Other GenDialog updates.
876 allow network_type to be None in CConfig.
877
878 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
879 Add _dynamic_stage3 option to IP.
880 Add check for that option to dynamic stage3 code in ArchTemplate.
881 Fix code to determine default route in get_eth_info() in GLIUtility.
882 Fix serialization of dns-servers in ClientConfig.
883
884 24 Jul 2005; Preston Cody <codeman@gentoo.org>
885 changed default values of cron/logger in IP.
886 moved GenDialog IP init out to the individual files. gli-dialog's version
887 will change quite a bit.
888
889 22 Jul 2005; Preston Cody <codeman@gentoo.org>
890 added ppcArchTemplate. blank now. working on yaboot.
891 modified ArchTemplate for amd64 and ppc custom kernels.
892 skeleton implementation of _configure_yaboot.
893 small fixes to other templates.
894
895 21 Jul 2005; Preston Cody <codeman@gentoo.org>
896 GenDialog updates. changed comment in IP.
897
898 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
899 src/GLIInstallProfile.py:
900 Fix codeman's screwup of changing the service seperator to ',' in the parser
901 without changing it in the serialization code! Also document this in a
902 comment so you find it easier. Everybody needs to make sure they update
903 their install profiles!
904
905 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
906 src/GLIArchitectureTemplate.py:
907 Fix casting of list to string and concat of None with string, as well as
908 commented prototype of checking that mounting actually worked (found a case
909 where mount can return success, but the mount won't be done).
910
911 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
912 src/templates/x86ArchitectureTemplate.py:
913 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
914 checking for the device, and sleeping 1 second each time.
915
916 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
917 src/templates/x86ArchitectureTemplate.py:
918 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
919 bootloader works again. Also rename _install_{grub,lilo} to
920 _configure_{grub,lilo} since they don't install the loaders anymore
921 themselves.
922
923 7 Jul 2005; Preston Cody <codeman@gentoo.org>
924 fix global USE flags to not include the arch types at the end.
925 updates to GenDialog and gli-d.
926
927 6 Jul 2005; Preston Cody <codeman@gentoo.org>
928 fixing bootloader code for no initrd and initrd->initramfs naming change.
929
930 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
931 Proper comments and parameters to GLIException in install_mta()
932 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
933 Add strip() to list_mirrors(), list_subarch_from_mirror() and
934 list_tarball_from_mirror() to eliminate blank last item.
935
936 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
937 Added stage3 generation code.
938
939 5 Jul 2005; Preston Cody <codeman@gentoo.org>
940 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
941 Mild changes to GenDialog.
942
943 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
944 Remove separate install step configure_rc_conf() since it's handled by
945 update_config_files()
946 Make a copy of newvalues in _edit_config() so quotes aren't added when the
947 function is called twice on the same file.
948
949 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
950 Missing \ in sed in _get_packages_to_emerge()
951 Removed explicit emerging of hotplug and no longer add it to the runlevel.
952 Check in _quickpkg_deps() to ignore blank package names returned from
953 _get_packages_to_emerge()
954
955 28 Jun 2005; Preston Cody <codeman@gentoo.org>
956 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
957 in the dialog.py gauge code.
958
959 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
960 Add code to update_config_files() to go through etc_files and update stuff.
961 Check to see that _etc_files['make.conf'] exists in get_make_conf()
962 Only use float() in partition xml parsing code if type == "free"
963
964 28 Jun 2005; Preston Cody <codeman@gentoo.org>
965 finished almost all internationalization of GenDialog.
966 attempt at fixing rc.conf function. moved 3 generate functions out of
967 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
968 added dialog.py to the fe/dialog directory so it actually gets used.
969
970 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
971 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
972
973 27 Jun 2005; Preston Cody <codeman@gentoo.org>
974 fix extra entry in list_mirrors()
975 beginning internationalization runthrough.
976
977 26 Jun 2005; Preston Cody <codeman@gentoo.org>
978 added dialog.py to /src temporarily until it gets accepted upstream.
979 fix for unused value in form in dialog.py and changed heights.
980 fix GenDialog forms.
981
982 25 Jun 2005; Preston Cody <codeman@gentoo.org>
983 Changed hostname/domainname for new baselayout.
984 Changed _add_to_runlevel errors to logs.
985 Updated TODO list to show status of GenDialog
986 More updates to GenDialog including two checklists that probably won't work.
987 update IP to use comma-separated list instead of space separated for services.
988
989 24 Jun 2005; Preston Cody <codeman@gentoo.org>
990 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
991 GenDialog as it gets closer to completion.
992
993 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994 Modify get_eth_info() to take a full interface name (eth0 fex). float()
995 instead of int() in add_partition_device_partition() for minor (closes 96804)
996
997 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
998 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
999 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1000 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1001
1002 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1003 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1004 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1005 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1006 Fix undefined variable 'output' issue in spawn().
1007
1008 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1009 More updates to GenDialog and gli-d.
1010
1011 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012 Modify list_mirrors() to return a list of mirror URL/name pairs.
1013
1014 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1015 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1016 get subarch.
1017
1018 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1019 Backend partitioning will create disklabel is none exists. Installprofile
1020 defaults to "" now instead of "msdos" for disklabel type. Fix for
1021 mount_local_partitions() to remember device along with minor in the
1022 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1023 add else block to log unsupported netmount types to mount_network_shares()
1024
1025 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1026 src/GLIArchitectureTemplate.py:
1027 Refactor kernel_compile common stuff, fix 2.4 build process.
1028 src/fe/cli/clife.py:
1029 Logging system.
1030 src/GLIUtility.py, src/GLIStorageDevice.py:
1031 Add comments about re-writes needed for boxes without sysfs.
1032
1033 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1034 src/GLIArchitectureTemplate.py:
1035 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1036 'make dep' call for custom compile. build_mode support for prepare-only and
1037 none types completed. custom compile function chains shell functions in
1038 spawned script, to allow for catching all errors.
1039
1040 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1041 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1042 and GenDialog. other gendialog updates as well. kernel updates untested.
1043
1044 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1045 src/GLIInstallProfile.py:
1046 Change structure of etc-portage stuff. The serialization was broken before my
1047 last commit, and I am the only person that's ever used it. The new schema is
1048 as follows:
1049 <etc-portage>
1050 <file name="package.mask"/>
1051 <file name="package.unmask">
1052 <entry atom="sys-kernel/openmosix-sources"/>
1053 </file>
1054 <file name="package.use">
1055 <entry atom="sys-libs/db">
1056 -java
1057 </entry>
1058 <entry atom="dev-libs/cyrus-sasl">
1059 -ldap
1060 </entry>
1061 </file>
1062 </etc-portage>
1063
1064
1065 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1066 src/GLIInstallProfile.py:
1067 Add new entry for gli-profile/kernel-build-method item. Add missing
1068 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1069 keys in the same order.
1070
1071 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1072 src/GLIArchitectureTemplate.py:
1073 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1074 was repeatedly appended to make.conf.
1075
1076 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1077 src/GLIArchitectureTemplate.py:
1078 Put some Linux-2.6 specific code under a if statement. Store list of
1079 successfully mounted swap device for using swapoff. Add proper error checking
1080 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1081 'file'. Clean up some redundant code (thanks to pychecker).'
1082
1083 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1084 Fix typos: get_extended() instead of get_extended_partition(). Added
1085 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1086 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1087
1088 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1089 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1090 in add_network_interface.
1091
1092 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1093 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1094 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1095 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1096 prepare_chroot.
1097
1098 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1099 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1100 +src/fe/installer-gtk:
1101 Add new automated CLI frontend. Add scripts that are the intended means to
1102 use each frontend.
1103
1104 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1105 src/GLIClientController.py:
1106 Add null type to network config, for cases where the interface is already up
1107 and should not be touched (netboot for example).
1108
1109 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1110 src/GLIArchitectureTemplate.py:
1111 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1112 string!. Try to use binary packages if available by default.
1113
1114 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1115 src/GLIArchitectureTemplate.py:
1116 More error checking for _add_to_runlevel, to ensure that the init script
1117 actually exists before we try to add it. set_services phase must take place
1118 after the package installation, otherwise the init scripts might not exist.
1119 Find the correct init script for the cron and logging daemons, and add that
1120 instead of the package atom.
1121
1122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1123 src/GLIArchitectureTemplate.py:
1124 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1125 usage of 'file' to 'contents' for the variable name, as it shadows
1126 __builtin__.file.
1127
1128 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1129 src/GLIArchitectureTemplate.py:
1130 Add MTA install code, and include MTA install phase. Ensure
1131 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1132 for 'none' kernel config for build_kernel phase. Put kernel_script in
1133 /var/tmp instead of /root for build_kernel phase.
1134
1135 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1136 Rename mta variables to match syslog/cron variables.
1137
1138 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1139 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1140 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1141 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1142 src/templates/.cvsignore, src/tests/.cvsignore:
1143 Refactor partition formatting again to include error checking. Allow 'none'
1144 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1145
1146 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1147 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1148 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1149 only have a single spawn call.
1150
1151 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1152 refixed samyron's fix of set_architecture_template.
1153
1154 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1155 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1156 be executable.
1157
1158 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1159 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1160 error checking when you call set_architecture_template.
1161
1162 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1163 moved the mkfsopts input to the partition options menu instead of the during
1164 the creation process. updated GenDialog to say it supports reiserfs v3.
1165
1166 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1167 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1168 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1169 Add support for other partition types to dialogfe.
1170 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1171 avoid integer overflows and wraparounds.
1172
1173 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1174 Removed start/end from XML output and added mkfsopts to partitioning info.
1175 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1176 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1177 in GLIClientConfiguration. Change from .1 and .9 to constants for
1178 partitioning. Fix free space overwriting bug. Remove a few unused functions
1179 from rewrite. Fix call to get_partition_at()
1180
1181 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1182 Updates to GenDialog and dialogfe.
1183
1184 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1185 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1186
1187 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1188 more GenDialog updates to partitioning.
1189
1190 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1191 Indenting issue in GLISD/get_ordered_partition_list.
1192 updates to GenDialog partitioning and added default UTC for timezone in IP.
1193
1194 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1195 Added GLISD.get_model()
1196
1197 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1198 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1199 More updates to GenDialog :)
1200
1201 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1202 Added get_interface_realname() function.
1203
1204 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1205 Added auto-save of CConfig and copying to new /root after install.
1206 yet even more GenDialog updates.
1207
1208 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1209 removed print statement from GLISD. more updates to GenDialog.
1210
1211 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1212 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1213 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1214 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1215 places in GLIClientConfiguration.
1216
1217 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1218 Fix mount_local_partitions(), configure_fstab(), and
1219 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1220 A few more fixes for templates/x86Archtemplate
1221
1222 27 May 2005; Preston Cody <codeman@gentoo.org>
1223 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1224 a work in progress.
1225
1226 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1227 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1228 directly. GLISD can now handle data imported from XML.
1229
1230 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1231 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1232 handle blank (no disklabel) disks.
1233
1234 20 May 2005; Preston Cody <codeman@gentoo.org>
1235 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1236 up, documented, and separated out serialization and grouped all sections.
1237
1238 19 May 2005; Preston Cody <codeman@gentoo.org>
1239 Reorganization of ClientConfiguration and gutting of unused functions.
1240 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1241
1242 18 May 2005; Preston Cody <codeman@gentoo.org>
1243 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1244
1245 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1246 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1247 partitioning. CC serializes install profile to disk and prepare_chroot()
1248 copies it into /mnt/gentoo/root
1249
1250 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Moved URI parsing into new function parse_uri()
1252
1253 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1254 Added XMLParser module.
1255
1256 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1258 Minor fix to is_uri() regex to allow hyphens in hostname.
1259
1260 12 May 2005; Preston Cody <codeman@gentoo.org>
1261 Updated finishing_cleanup for new unmounting method from agaffney.
1262
1263 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1264 Fix GLILogger to use correct time format string. Fix _edit_config() to
1265 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1266 unicode support to is_realstring().
1267
1268 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1270 return value instead of non-zero. Add code to output a traceback to the
1271 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1272 instead of --nocolor.
1273
1274 10 May 2005; Preston Cody <codeman@gentoo.org>
1275 Added GLIGenDialog.py to make a generic class for the dialog functions that
1276 can be used by both dialogfe and the netfe/be. updated both for new filename.
1277 date changes. 2004->2005.
1278
1279 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 Removed 'quiet=True' from spawn() calls
1281
1282 10 May 2005; Preston Cody <codeman@gentoo.org>
1283 Updated GLIUtility with patches from chotchki. Also added documentation
1284
1285 9 May 2005; Preston Cody <codeman@gentoo.org>
1286 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1287 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1288 from bug #89683, mostly touchups.
1289
1290 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 GLIStorageDevice cleanup patch from bug #91761
1292
1293 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1294 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1295 _edit_config(). Error logging casts 'error' to str
1296
1297 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Exceptions received in CC are logged before being passed to the FE. Added
1299 code to CC to handle exceptions *not* thrown by the installer itself.
1300
1301 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 get_max_mb_for_resize() returns -1 if not self.resizeable
1303
1304 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 More dirty rsync hacks :-/
1306
1307 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1308 Patches from chotchki (bug #90325) to improve CC networking. untested.
1309
1310 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1312 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1313 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1314 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1315 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1316 _get_packages_to_emerge()
1317
1318 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1319 Added group-adding code to set_users in ArchTemplate
1320
1321 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 Added post-install script code
1323
1324 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1325 Fixed encapsulation issues in GLIClientController (bug #90141)
1326
1327 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Update resizing code in GLIStorageDevice
1329
1330 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1331 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1332
1333 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Reverted change to ArchTemplate and added support for commented line in old
1335 code.
1336
1337 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1338 Changed _edit_config() to modify value in-place instead of commenting out and
1339 adding the new value to the end of the file.
1340
1341 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1342 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1343 Also updated TODO list.
1344
1345 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1346 Use blackace's one-liner to add comments for all function for use with
1347 pythondoc.
1348
1349 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Moved 'end >= device_sectors' check out of loop to check for next partition's
1351 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1352 Partitioning code now tracks start/end of extended for placing logicals. End
1353 point of logical is now adjusted along with start.
1354
1355 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1356 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1357 the way of partitioning from a blank disk. Add int() around access to minor
1358 key in partition information due to new partition code leaving them as float.
1359
1360 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1361 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1362
1363 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1364 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1365
1366 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1367 Added support for DHCP options and MAC addresses in the InstallProfile.
1368
1369 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1370 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1371 sed to properly strip out junk.
1372
1373 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1374 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1375 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1376
1377 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1378 Fixed indent problem in GLICController
1379
1380 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 Check for disklabel type "loop" and use the device name without a minor.
1382
1383 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 Remove /tmp/compile_output.log and /var/log/install.log when install is
1385 complete. Added code to (hopefully) keep 2nd thread running after install.
1386 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1387 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1388 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1389
1390 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1391 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1392 when unpacking tarball.
1393
1394 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1395 rewrote filesystem_tools. looks like it works so ripping out all the old
1396 filesystem_tools code.
1397
1398 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1399 Changed the print statements to logging in the partitioning BE code.
1400 the logger may need to be imported to the x86archtemplate. unknown yet.
1401 Added the finishing_cleanup function.
1402 added a fix to the logger from BenUrban
1403
1404 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1405 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1406 URIs. The blank uri check has been commented out.
1407 ripped out error checking of set_services. this is done by _add_to_runlevel.
1408
1409 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1410 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1411
1412 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1413 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1414 the install profile if available. Commented out spawn() debugging prints
1415
1416 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1417 small changes to setup_network_post. moved adding to runlevel of net.x to
1418 after the device gets symlinked. added domainname runlevel command.
1419
1420 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1421 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1422 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1423 spawn() call in livecd-kernel code to pass environment variables.
1424 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1425 the install profile if available.
1426
1427 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1428 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1429 to handle installing the livecd kernel into the new system.
1430
1431 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1432 should emerge hotplug and coldplug before adding them to runlevel.
1433
1434 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1435 took chroot out of grub_install command.
1436
1437 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1438 Changed chroot wrapper code in spawn() to write the wrapper the python way
1439 instead of the bash way to avoid quote conflicts. Added
1440 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1441 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1442 as it breaks the piping.
1443
1444 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1445 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1446
1447 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1448 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1449 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1450 GLIInstallProfile.
1451
1452 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1453 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1454 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1455 into /mnt/gentoo in prepare_chroot()
1456
1457 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1458 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1459 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1460 to start/end sectors
1461
1462 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1463 Add 2>&1 to cmd in spawn()
1464
1465 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1466 Modified GLIUtility.exitsuccess() to work with return value from
1467 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1468 creates wrapper script for commands run inside chroot so multiple commands
1469 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1470 for the generated script from spawn()
1471
1472 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1473 Removed default values for stage tarball URI and portage tree URI from
1474 InstallProfile. These should be set by the FEs. also added services step to
1475 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1476 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1477
1478 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1479 Small fix for setting the default gateway. Also added feature to dialogfe.
1480
1481 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1482 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1483
1484 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1485 Fixed a bunch of true -> True typos. lots of em
1486 only write new resolv.conf if there are dns servers listed.
1487
1488 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1489 Commented out 'display_on_tty8=True' in start_portmap()
1490
1491 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1492 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1493
1494 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1495 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1496 lang parameter to __init__()
1497
1498 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1499 updates to TODO list.
1500
1501 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1502 Initial code for quickpkg GRP support. Fix loop to grab packages from
1503 'emerge -p blah'
1504
1505 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1506 check for dhcp in the network stuff and emerge it if it is.
1507 added quickpkg to TODO list
1508
1509 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1510 Changed the raising of 'warning' exceptions to a simple log of the error
1511 so that the installer can continue.
1512
1513 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1514 Some big changes. First, changed most output to display_on_tty8.
1515 Second, added log lines to all templates. Some smaller fixes such as typos.
1516 Also did some cleanups of old commented lines.
1517
1518 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1519 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1520 Undo change with fix. Escaping fix in GLIStorageDevice.py
1521
1522 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1523 more updates to TODO list. hopefully we'll soon start removing items instead
1524 of adding them.
1525
1526 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1527 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1528
1529 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1530 updated TODO list. (again)
1531
1532 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1533 changed output of portmap start to display_on_tty8.
1534 fixed bootloader for udev and multiple kernels
1535 fixed custom kernel config (again)
1536
1537 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1538 changed default value of CC._enable_ssh to True because this is smart.
1539 added code to allow custom kernel .config. may be unstable and break. sorry.
1540
1541 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1542 partition() now waits until after it checks for partition flags before delete
1543 the partitions :P
1544
1545 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1546 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1547 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1548 blank.
1549
1550 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1551 Various fixes related to the add_users function. Still not yet finished.
1552 Added things to the TODO list. Lets start using that!
1553
1554 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1555 Added code to x86Template to format newly created partitions. Also added
1556 some error checking code. GLIStorageDevice passes 'minor' with data to
1557 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1558 mounting code.
1559
1560 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1561 Took out unnecessary setting of random livecd root password. the cd already
1562 sets it randomly.
1563
1564 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1565 Took out an unneeded step from CC's run()
1566
1567 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1568 Attempt at detecting and adding windows partitions to lilo.
1569
1570 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1571 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1572 partition. fixed misc exit_status => exitstatus typo.
1573
1574 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1575 Added basic code for resizing filesystems with pyparted. Fixed code for
1576 resizing ntfs and ext2/3.
1577
1578 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1579 Fixed partition() in x86Template so that it scans through logicals and deletes
1580 before deleting containing extended partition. Also clears partition table to
1581 be safe before third pass.
1582
1583 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1584 Added mount_network_shares. not able to test it from this computer.
1585 will test when i get back to school.
1586 also added start_portmap to the client_controller as an always-do.
1587 agaffney says this is needed for NFS mounts to work.
1588
1589 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1590 Partial rewrite of partitioning code in x86Template. No longer shells out to
1591 parted to perform actions, now uses all pyparted calls. Code "works" in a
1592 test, but still needs lots of TLC. Also modified tests/install.py to work
1593 with x86Template and GLIClientConfiguration.
1594
1595 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1596 Initial move of partitioning code from ArchTemplate to x86Template.
1597
1598 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1599 Added grp_install and services to InstallProfile. forgot about the set_root_password
1600
1601 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1602 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1603 Test Install ran very well (skipping partitioning).
1604
1605 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1606 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1607 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1608 some may still have eluded me.
1609
1610 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1611 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1612 Just finished mount_local_partitions in GLIArchitectureTemplate
1613
1614 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1615 Added get_num_sectors() to GLIStorageDevice.
1616
1617 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1618 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1619 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1620 from GLIInstallProfile.
1621
1622 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1623 GLIStorageDevice returns "unknown" instead of "" for get_type()
1624
1625 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1626 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1627 actually work. Commented out resizability checking code for speed.
1628
1629 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1630 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1631 GLIStorageDevice at the suggestion of plors
1632
1633 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1634 Added a function to GLIUtility to pull a value from a make.conf-style config
1635 file. Minor type fix to GLIInstallProfile.py
1636
1637 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1638 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1639 network mounts from partition data structure in GLIInstallProfile
1640
1641 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1642 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1643 can be resized.
1644
1645 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1646 Added some of the final functions to GLIInstallTemplate.
1647 Yes this project is still active despite rare use of the Changelog!
1648
1649 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1650 Added the GLIPartitionTools.py file. This is a temporary insertion of
1651 partitioning tools that will eventually go into their own package.
1652
1653 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1654 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1655 for the program). Added __init__(install_profile, client_configuration) to
1656 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1657 to avoid constantly passing stuff every time we call a method.
1658
1659 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1660
1661 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1662 files without messing up all the other stuff in them. This will be used for making
1663 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1664
1665 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1666
1667 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1668 have a few basic things. I added two private methods. One is _depends(). This
1669 will be used for dependency checking (ie. unpacking a tarball requires that
1670 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1671 same syntax as os.system(), however, instead of being run in the liveCD
1672 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1673 isolated the code. Hope to work more this week to get this class formed...
1674
1675 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1676
1677 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1678 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1679 to allow for easier modification (mutable, rather than immutable objects). Updated
1680 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1681 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1682 Added initial unit test code.
1683
1684 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1685
1686 Added initial changelog. Setting up the basic structure of the CVS repository
1687 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1688 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20