/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1317 - (show annotations) (download)
Tue Feb 28 13:30:03 2006 UTC (8 years, 6 months ago) by agaffney
File size: 69943 byte(s)
  src/GLIClientController.py:
  accept 'none' as well as 'null' for network type

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.604 2006/02/28 13:30:03 agaffney Exp $
5
6 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIClientController.py:
8 accept 'none' as well as 'null' for network type
9
10 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/GLIPortage.py:
12 copy_pkg_to_chroot() uses compile_output.log for command output
13
14 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
15 only keep a 1000 line 'scrollback' buffer for the compile output and log file
16
17 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
18 src/GLIPortage.py:
19 add code make GLIPortage.py capable of being run stand-along for dynamic
20 stage3 generation and copying packages in a GRP-ish way
21 grp code fixups
22
23 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIPortage.py:
25 ignore blank packages passed to get_deps() and emerge()
26
27 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIUtility.py:
29 add get_chosts() function
30
31 *GLI-0.3 (12 Feb 2006)
32
33 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/templates/x86ArchitectureTemplate.py:
35 pull old start/end sector values from somewhere that actually has them
36 add logic for extended partition to code that makes sure new end sector
37 doesn't overlap start sector of next partitions
38 don't freak out if partition can't be deleted
39
40 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
41 src/GLIPortage.py:
42 run env-update at the end of copy_pkg_to_chroot()
43
44 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
45 src/templates/x86ArchitectureTemplate.py:
46 I'm a complete fscking dumbass. I recorded the end sector for partitions that
47 weren't being touched, but I never used it when recreating them...the end was
48 calculated from the size in MB instead :/
49
50 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
51 src/GLIArchitectureTemplate.py:
52 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
53 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
54 src/GLIPortage.py:
55 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
56 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
57 'resized' flag
58
59 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIPortage.py:
61 short circuit and check vdb directly if package begins with '='
62
63 8 Feb 2006; Preston Cody <codeman@gentoo.org>
64 added more packages to extra_packages list in IP
65
66 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/templates/x86ArchitectureTemplate.py:
68 10 tries to create filesystem instead of 3
69 src/GLIPortage, src/GLIArchitectureTemplate.py:
70 ignore_missing flag for copy_pkg_to_chroot()
71
72 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIPortage.py:
74 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
75
76 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
77 src/net/server/gliserv.py:
78 fix handling of 404 for real files
79 src/net/server/GLIServerProfile.py:
80 look for 'hostname' in attributes instead of 'name'
81
82 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
83 src/SimpleXMLParser.py:
84 initial support for 'include' in XML files
85 src/GLIStorageDevice.py:
86 initial support for %
87 src/GLIClientController.py:
88 add debugging statements to pre-install steps
89
90 15 Jan 2006; Preston Cody <codeman@gentoo.org>
91 webgli/configfiles:
92 check for key in etc_files['rc.conf'] to fix key error
93 webgli/timezone: small fix.
94 webgli/extrapackages: list-type fix
95 webgli/services: same
96 glimd: add/edit_client updates.
97
98 12 Jan 2006; Preston Cody <codeman@gentoo.org>
99 added configure.pyhtml to glimd. minor changes
100 to top and add_client. fixed up showargs.
101 added execute.pyhtml
102 changed register clients line in gliserv for name->hostname.
103 updated TODO.
104
105 10 Jan 2006; Preston Cody <codeman@gentoo.org>
106 src/net/server/*:
107 added add/del/edit client/profile.pythml for glimd.
108 updated templates, showclients, and gliserv.
109
110 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/net/server/*:
112 stupid threading module...
113
114 8 Jan 2006; Preston Cody <codeman@gentoo.org>
115 AT: rc.conf -> conf.d/clock
116
117 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
118 src/GLIPortage.py:
119 show 'Calculating dependencies for ...' in subprogress bar at beginning of
120 emerge()
121 src/GLIArchitectureTemplate.py:
122 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
123 in the chroot
124 remove _quickpkg_deps() and _portage_best_{visible,version}()
125 src/GLIUtility.py:
126 fail immediately in validate_uri() if provided URI can't be parsed
127 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
128 debug code in spawn()
129 use lower-level os.read() instead of file.read() because python sucks
130 src/templates/x86ArchitectureTemplate.py:
131 basic subprogress reporting for partitioning
132 total_steps was 1 too high
133
134 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
135 src/GLIUtility.py:
136 move parse_vdb_contents() to GLIPortage
137 src/GLIPortage.py:
138 remove all symlink fixups
139 ignore 'dir' entries in CONTENTS
140 call tar with -p
141
142 5 Jan 2006; Preston Cody <codeman@gentoo.org>
143 AT: bootsplash is now gensplash
144 gliserv: add advanced_mode to shared_info
145 webgli: Added advanced mode. mostly just disables a few screens.
146
147 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
148 src/GLIPortage.py:
149 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
150 added emerge()
151 update sub-progress after each package is emerged
152 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
153 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
154 remove link if it exists before moving content into place
155 src/GLIArchitectureTemplate.py:
156 install_packages() now calls emerge() in GLIPortage
157 change all calls to self._emerge() to self._portage.emerge()
158 comment out all emerge status checking...using exceptions now
159 call copy_pkg_to_chroot() directly for livecd-kernel
160
161 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIArchitectureTemplate.py:
163 remove add_pkg_to_world() and copy_pkg_to_chroot()
164 copy installer.log to installer.log.failed on install failure
165 src/GLIUtility.py:
166 added get_keymaps()
167 spawn() takes any False argument for chroot instead of just None
168 src/GLIPortage.py:
169 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
170 change copy_pkg_to_chroot() to work properly with use_root=False
171 figure PORTAGE_TMPDIR properly
172
173 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
174 src/net/server/html/*:
175 converted showclients, load/saveprofile
176
177 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIPortage.py:
179 exclude packages already in chroot vdb from binary deplist
180 chroot to use best_version for chroot's vdb
181 src/runtimedeps.py:
182 accept ROOT via commandline instead of env
183
184 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
185 src/runtimedeps.py:
186 remove passing of ROOT
187 src/GLIPortage.py:
188 modify get_deps() to get deptree for each package and merge into final list
189 remove depgraph class
190 add debugging code to get_deps()
191 src/GLIArchitectureTemplate.py:
192 combine code for GRP/compile in install_packages() into one block
193 debugging code in install_packages()
194
195 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
196 src/runtimedeps.py:
197 initial commit
198 src/GLIPortage.py:
199 use separate script for GRP deps
200 remove calls to portage module
201
202 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
203 src/GLIPortage.py:
204 initial commit
205 move some of portage function from GLIAT
206 flipped around a few function args
207 src/GLIArchitectureTemplate.py:
208 revamp install_packages() for new GLIPortage
209
210 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
211 src/GLIArchitectureTemplate.py:
212 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
213
214 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
215 src/net/server/gliserv.py:
216 wrap generated code in a class to isolate it a bit better
217 302 redirects work
218 don't use cgi.escape() for <% %>
219 src/net/server/html/webgli/*:
220 load/save profile
221 src/GLIUtility.py:
222 change /sbin/lspci to just lspci
223
224 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
225 src/GLIClientController.py:
226 change ordering of statements in CC run() while loop to not go past the end
227 of the array
228 src/GLIArchitectureTemplate.py:
229 removed redundant bind mounts
230
231 18 Dec 2005; Preston Cody <codeman@gentoo.org>
232 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
233 added a diagram by blackace from last night.
234 added the glossary in RTF format.
235
236 17 Dec 2005; Preston Cody <codeman@gentoo.org>
237 x86AT: separated out emerge/configure from running of bootloader
238 added MBR drive support to lilo.
239 these changes will likely not work.
240 AT: added setup_and_run_bootloader step.
241
242 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
243 src/net/server/gliserv.py:
244 call generated code in a function
245 src/net/server/html/webgli/*:
246 include top/bottom
247 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
248 src/GLIClientCongifuration.py:
249 install mode magic
250
251 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
252 src/GLIClientController.py:
253 use GLIException when there's an import problem
254 added debug code to show install_steps
255 src/templates/amd64ArchitectureTemplate.py:
256 add . to import path
257 proper path this time: ../../templates
258 src/GLIArchitectureTemplate.py:
259 add _portage_best_version() function
260
261 11 Dec 2005; Preston Cody <codeman@gentoo.org>
262 added initial glossary and gimli diagram to the docs directory.
263 modify gli-dialog to allow editing of the install_profile after loading XML.
264
265 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
266 src/net/server/html/webgli/:
267 converted globaluse, localuse, networkmounts, portagetree, and stageselection
268 moved saveclientconfig stuff into clientconfig
269 moved saveconfigfiles into config files
270 converted etc_portage and makedotconf
271 converted bootloader and kernel
272 convert daemons, extrapackages, networking, review, services, timezone, users
273 src/net/server/gliserv.py:
274 proper 404 handling for .pyhtml extension
275 HTML escape <% %> stuff
276 work around python's sucky regexes
277 src/GLIInstallProfile.py:
278 allow set_{rsync,ftp,http}_proxy() to accept empty values
279
280 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
281 src/net/server/gliserv.py:
282 initial commit of Legolas templating engine
283 302 redirects
284 src/net/server/html/index.html, src/net/server/webgli_template.html:
285 minor changes for new code
286 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
287 initial commit of the conversion from the monolithic WebGLIHandler.py to the
288 one file per path Legolas goodness
289 partitioning[2-4] done
290
291 5 Dec 2005; Preston Cody <codeman@gentoo.org>
292 webgli: dhcp options in CC and post-install.
293 updated comparison chart.
294 webgli: etc/portage/* and distcc support added. not too-well tested.
295
296 4 Dec 2005; Preston Cody <codeman@gentoo.org>
297 webgli_template.html: valign=top on left side.
298 webgli: fix bootloader boot_device. now working.
299 webgli: CC proxy done. post-install proxy in progress.
300
301 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
302 src/net/server/webgli_template.html:
303 increase padding for content cell to 7px and add colspan=2
304
305 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
306 webgli: added graphic bar on top
307 webgli: added hover effects on the links on the left
308 webgli: re-rendered header_bg.png to stretch without artifacts
309
310 3 Dec 2005; Preston Cody <codeman@gentoo.org>
311 webgli: make.conf disabling fixes for dynamic_stage3
312 fixed portage snapshot browse popup
313 all changes tested.
314 webgli: add debug mode to CC screen. the screen still needs lots of work.
315
316 1 Dec 2005; Preston Cody <codeman@gentoo.org>
317 added debug mode question to gli-dialog
318 added CC proxies to CC networking for gli-dialog
319 webgli: fixed skip CC networking if connection active
320 webgli: portage snapshot defaults to CD
321 webgli: bootloader mbr drive selection
322 webgli: USE flags unselectable if dynamic_stage3
323 webgli: manual extra packages and save button.
324
325 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
326 src/GLIUtility.py:
327 change ping count to 2
328 docs/comparison.html
329 initial commit
330
331 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
332 src/templates/x86ArchitectureTemplate.py:
333 fix map() issue with grub code
334 replace kernel_names and initrd_names loops with one-liners
335
336 27 Nov 2005; Preston Cody <codeman@gentoo.org>
337 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
338 initial gli-dialog support for recommended partitioning layout and clear.
339 failure cleanup now an option for gli-dialog.
340 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
341 added comparison list and updated TODO!
342
343 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
344 src/GLIArchitectureTemplate.py:
345 fix to stage1() debug code
346 fix to stage2() debug code
347
348 26 Nov 2005; Preston Cody <codeman@gentoo.org>
349 some more bootloader code fixes. forgot boot_device != mbr_device.
350
351 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352 src/GLIStorageDevice.py:
353 fix to unallocated space merging when last one is after part 4
354
355 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
356 src/GLIArchitectureTemplate.py:
357 small fix to debugging code in copy_pkg_to_chroot()
358
359 23 Nov 2005; Preston Cody <codeman@gentoo.org>
360 more bugfixes with bootloader code
361 gli-dialog side appears to work
362
363 21 Nov 2005; Preston Cody <codeman@gentoo.org>
364 initial adding of boot_device to backend.
365 initial boot_device support added to gli-dialog.
366 some fixes of my poor coding
367
368 20 Nov 2005; Preston Cody <codeman@gentoo.org>
369 converted gli-dialog to use the install_package_list.
370 gtkfe has already been converted by AllanonJL
371 new way working in gli-dialog now and added to webgli.
372 added set/get_boot_device() to IP
373
374 19 Nov 2005; Preston Cody <codeman@gentoo.org>
375 get_install_package_list added to InstallProfile. This can be used by the FEs
376
377 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
378 src/templates/x86ArchitectureTemplate.py:
379 call ls with '-1 --color=no'
380
381 16 Nov 2005; Preston Cody <codeman@gentoo.org>
382 added warning (#9) to GRP ppl about stage3 tarballs
383
384 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
385 src/GLIArchitectureTemplate.py:
386 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
387 confused
388
389 13 Nov 2005; Preston Cody <codeman@gentoo.org>
390 removed protocols from rc.conf screens
391 finished initial rc.conf and make.conf in webgli
392
393 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
394 src/net/server/gliserv.py:
395 add -h option to usage()
396 show time and request URI in debug mode
397 show client IP in debug mode
398 just use IP instead of trying to do a reverse lookup
399
400 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
401 src/net/server/gliserv.py:
402 'classier' 401 message
403 proper commandline parsing
404 help via -h
405 user/pass can be specificed via commandline option
406
407 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
408 src/net/server/gliserv.py:
409 basic HTTP auth
410
411 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
412 src/net/server/gliserv.py:
413 dynamic module reloading (yipee!)
414 send 'Last-Modified' header for real files
415 respond to HEAD with just headers
416 src/net/server/handlers/WebGLIHandler.py:
417 icons for drives
418
419 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
420 src/net/server/handlers/WebGLIHandler.py:
421 initial 'pretty' partition table display support
422 clicking partition in 'pretty' display works instead of radio buttons
423 radio buttons and pretty display work together
424 META redirect instead of javascript
425 pretty display stretches across entire screen
426 'Recommended layout' and 'Clear drive' functions
427 properly catch exceptions from do_recommended()
428 src/GLIArchitectureTemplate.py:
429 replace preinst, copy, postinst, rm steps with qmerge
430 whoops...that shouldn't have been commented out
431 create image_dir with -p in copy_pkg_to_chroot()
432 more generic of symlink crappiness
433 new copy_pkg_to_chroot() actually works now
434
435 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
436 src/GLIStorageDevice.py:
437 initial generic disk support
438 fixes for add_partition() code
439 src/net/server/handlers/WebGLIHandler.py:
440 added support for creating generic disks
441 add new partition working
442 save and delete partitions
443
444 6 Nov 2005; Preston Cody <codeman@gentoo.org>
445 webgli: Partitioning making progress.
446
447 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
448 src/GLIArchitectureTemplate.py:
449 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
450 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
451 dir) and works around /etc/gconf symlink problem
452
453 5 Nov 2005; Preston Cody <codeman@gentoo.org>
454 webgli: lots of updates. preliminary partitioning. extra packages works.
455
456 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
457 src/net/server/gliserv.py:
458 httpd now supports HTTPS and falls back to HTTP if not available
459 make fallback actually work
460 src/net/server/SecureXMLRPCServer.py:
461 SecureSocketServer is now threaded
462
463 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
464 src/net/client/gliclient.py:
465 try to use HTTPS for XMLRPC first and fallback to HTTP
466 pretend mode
467 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
468 HTTPS XMLRPC goodness from samyron
469 pass name of certificate
470
471 31 Oct 2005; Preston Cody <codeman@gentoo.org>
472 wegli: daemons and services screens done.
473
474 30 Oct 2005; Preston Cody <codeman@gentoo.org>
475 webgli: networking and users screens
476 added return_redirect to handler.py
477 loading and saving install/client profiles works for webgli now
478 Review also done
479
480 *GLI-0.2 (27 Oct 2005)
481
482 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
483 src/templates/x86ArchitectureTemplate.py:
484 properly check for bootloader emerge exist status with exitsuccess()
485 log output of grub install command
486 add --batch --no-floppy to grub command
487 grubinstallstring only gets logged if debug is on
488 src/GLIUtility.py:
489 update progress bar to 100% when process finishes
490
491 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
492 src/GLIClientController.py:
493 added debugging code for the interaction between the 2 threads via Event()
494 src/GLIUtility.py:
495 doubled the buffer size in spawn()
496 bump buffer size up to 16384
497 only report progress in 5% increments
498 src/GLIArchitectureTemplate.py:
499 kernelpkgs.txt support code
500 above disabled because it sucks
501 added add_pkg_to_world()
502
503 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
504 src/GLIArchitectureTemplate.py:
505 use tar | tar to copy files in copy_pkg_to_chroot()
506 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
507
508 23 Oct 2005; Preston Cody <codeman@gentoo.org>
509 DEBUGGING ADDED TO AT. verbose field added to CConfig.
510
511 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
512 src/net/server/gliserv.py:
513 / maps to index.html
514 look for actual files in html/
515 src/net/html:
516 new template
517 src/GLIUtility.py:
518 added parse_vdb_contents()
519 src/GLIArchitectureTemplate.py:
520 added copy_pkg_to_chroot()
521 added debug code to dynamic-stage3
522 switch dynamic-stage3 to new method
523 lots of bug fixes from adding debug code
524
525 22 Oct 2005; Preston Cody <codeman@gentoo.org>
526 webgli initial bootloader support + changed make.conf.
527 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
528
529 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
530 src/GLIUtility.py:
531 horrible tangled mess of code that is tarball unpacking subprogress display
532 add unpack progress to portage snapshot
533 use read() instead of readlines() in spawn()
534 only update progress bar for whole percents
535
536 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
537 src/templates/x86ArchitectureTemplate.py:
538 change call to 'grub' to use GLIUtility.exitsuccess()
539 add definition of 'build_mode' in _configure_lilo()
540 src/misc/updategtkfe, src/misc/updateglid:
541 fix so subshell is called in root shell
542
543 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
544 src/net/server/handlers/WebGLIHandler.py:
545 stage screen launches URI browser in sized window with various properties set
546
547 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
548 src/misc/updategtkfe:
549 updated to actually work
550 remove previous snapshot and extracted dir before downloading
551 src/misc/updateglid:
552 updated to actually work
553 src/templates/x86ArchitectureTemplate.py:
554 fixed bug where grub code was looking for 'root+root+file_name2'
555
556 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
557 src/net/server/handlers/WebGLIHandler.py:
558 URI browser
559 added mirror selection
560 src/GLIUtility.py:
561 ls via ssh strips off ending *
562
563 16 Oct 2005; Preston Cody <codeman@gentoo.org>
564 more updates to webgli. stage selection.
565
566 11 Oct 2005; Preston Cody <codeman@gentoo.org>
567 updated webgli with preliminary Network Mounts support.
568
569 9 Oct 2005; Preston Cody <codeman@gentoo.org>
570 GenDialog: string formatting and yes/no label fixes.
571 added WebGLI template for gliserv.py
572 added WebGLIHandler as well as a definition for it in gliserv.py
573 updates to the webgli files even though they won't be there for long.
574 Utility: remove exception for non-existant grppkgs.txt until the new livecd
575 goes public.
576
577 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
578 src/net/server/gliserv.py:
579 override dict to not be so anal
580 main server now loads separate module to handle requests
581 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
582 split out profile URLs into separate handler function
583 move handlers into subdirectory
584 add Welcome and Clients handlers
585
586 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
587 src/GLIUtility.py:
588 raise exception if password prompt received twice
589
590 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/GLIUtility.py:
592 removed rot13ify()
593
594 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
595 src/net/server/gliserv.py:
596 allow for param to be passed multiple times in GET
597 no XMLRPC functions return None
598 modify POST request parsing to only create a list if needed
599 fix GET request parsing so the list creation for multiple values works
600 src/net/client/gliclient.py:
601 various typo and type mismatch fixes
602 exit after exception
603
604 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
605 src/net/client/gliclient.py:
606 initial commit
607 pass MAC to XMLRPC functions
608 src/net/server/GLIServerProfile.py:
609 rename GLIClientsProfiles to GLIServerProfile
610
611 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
612 src/net/server/gliserv.py:
613 now handles POST requests
614 move majority of request handling code to common_handler() to reduce code
615 duplication
616 profile loading
617 client reg via XMLRPC goes into SharedInfo()
618 /showclients redesign
619 template fixes
620 allow handler functions to add/change headers
621 save profile
622
623 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
624 src/net/server/GLIClientsProfiles.py:
625 initial commit
626 src/net/server/template.html:
627 initial commit
628 src/net/server/gliserv.py:
629 add template mojo
630
631 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
632 src/net/server/gliserv.py:
633 XMLRPC mojo
634
635 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
636 src/GLIArchitectureTemplate.py:
637 add code in _edit_config() to comment line where variable is defined
638 previously
639 insert new line under previous definition of variable if it exists
640 small _edit_config() cleanup
641 src/GLIStorageDevice.py:
642 add clear_partitions() function
643 new sizes for recommended partition layout
644 automatically calculate swap size for recommended layout
645
646 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
647 src/templates/x86ArchitectureTemplate.py:
648 fat16 mojo
649
650 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
651 src/GLIStorageDevice.py:
652 prevent do_recommended() from being run twice
653 rewrite do_recommended() to be more robust
654 src/GLIArchitectureTemplate.py:
655 rework _edit_config() to not write duplicate entries
656
657 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
658 src/GLIStorageDevice.py:
659 added do_recommended() function to automatically created 256M/1G/* layout
660
661 17 Sep 2005; Preston Cody <codeman@gentoo.org>
662 src/gli-dialog.py: added set_distcc to the list
663 GenDialog: added set_distcc. untested.
664 IP: added install_distcc flag.
665 AT: added install_distcc function based on the flag. runs after build_kernel
666 changed AT spawn command for distcc for nodeps.
667
668 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
669 src/GLIUtility.py:
670 add rot13ify() function
671
672 16 Sep 2005; Preston Cody <codeman@gentoo.org>
673 src/GenDialog.py
674 added a sentence of text. unchecking support added.
675
676 15 Sep 2005; Preston Cody <codeman@gentoo.org>
677 src/GLIUtility.py
678 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
679 src/GenDialog.py
680 still working on extra_packages. transformed the list to new format.
681 added GRP indication to list. untested.
682 TODO lists updated.
683 src/fe/dialog/gli-dialog.py
684 spelling mistook.
685
686 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
687 src/GLIUtility.py:
688 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
689
690 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
691 src/GLIUtility.py:
692 add get_directory_listing_from_uri()
693 add http support to above
694 add ftp support to above
695 add scp support to above
696 src/GLIArchitectureTemplate.py:
697 "0" instead of 0 for key of single-element dict passed to _edit_config()
698
699 5 Sep 2005; Preston Cody <codeman@gentoo.org>
700 value_only -> only_value
701
702 3 Sep 2005; Preston Cody <codeman@gentoo.org>
703 gutted out all of etc_portage structure since it is now all handled by
704 etc_files
705
706 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
707 src/GLIArchitectureTemplate.py:
708 install_packages() sends progress update notifications
709 src/templates/x86ArchitectureTemplate.py:
710 increase sleep to 5s between format tries
711 src/GLIClientController.py:
712 pass 'self' to AT instead of 'self._pretend'
713
714 2 Sep 2005; Preston Cody <codeman@gentoo.org>
715 logger -> logger.log in x86AT
716
717 1 Sep 2005; Preston Cody <codeman@gentoo.org>
718 added set_etc_portage to IP. debugging gli-d's support for it.
719
720 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
721 src/templates/x86ArchitectureTemplate.py:
722 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
723
724 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
725 src/GLIArchitectureTemplate.py:
726 add _portage_best_version() function and rework install_packages() to allow
727 for future X of Y tracking
728 Use best_visible instead of best_version
729 tracked down and fixed missing = causing empty install extra packages
730 use = when emerging also
731 quickpkg hokey pokey
732 run _get_packages_to_emerge() again with -pk
733
734 22 Aug 2005; Preston Cody <codeman@gentoo.org>
735 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
736 the end of install_packages.
737 added updateglid to /src/misc
738 updated all core files with new GPL notice and copyright statement.
739
740 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
741 src/GLIUtility.py:
742 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
743 a snapshot in /mnt/cdrom/snapshots/
744 get_snapshot_from_cd() adds file:// at the beginning
745 change calls to extra package special case functions to 'self.blah'
746
747 21 Aug 2005; Preston Cody <codeman@gentoo.org>
748 src/ArchTemplate: changed "voodoo".
749 changed order of portage sync methods. made a fallback to webrsync if
750 normal emerge sync fails.
751 removed get_sources_from_cd because it is obsolete.
752 add special cases to install_packages. remove fatal exception on package
753 install failure b/c the box will still be bootable.
754 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
755 handled in the FEs.
756 src/GenDialog: added a bunch of code for dealing with x11-based packages.
757 awaiting testing.
758
759 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
760 src/GLIStorageDevice.py:
761 global try/except block around fs resizable detection code
762 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
763 install-failed cleanup function
764
765 18 Aug 2005; Preston Cody <codeman@gentoo.org>
766 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
767
768 16 Aug 2005; Preston Cody <codeman@gentoo.org>
769 GLIGenDialog:
770 add drive choices for loaded configs.
771 force snapshot for dynamic_stage3
772 init the snapshoturi input to the cd snapshot if not already selected.
773 if dynamic_stage3, skip the make.conf step.
774 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
775 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
776
777 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
778 src/GLIArchitectureTemplate.py:
779 manually call MAKEDEV in stage3-dynamic code
780 copy /etc/inittab.old to /etc/inittab in chroot
781 src/GLIUtility.py:
782 add beginning of validate_uri() function
783 add file:/// support to validate_uri()
784 single quotes when setting livecd password
785
786 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
787 src/GLIGenDialog.py:
788 change getmountpoint() to get_mountpoint()
789 src/misc/updategtkfe:
790 committed script to automatically download latest snapshot and run gtkfe
791 src/templates/x86ArchitectureTemplate.py:
792 fix _configure_lilo_add_windows() for IP -> GLISD stuff
793 src/GLIArchitectureTemplate.py:
794 give tmp_minor an initial value in mount_local_partitions so that the value
795 remain from the previous drive
796
797 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
798 src/templates/x86ArchitectureTemplate.py:
799 Fix _configure_lilo() for IP using GLISD stuff
800 src/GLIArchitectureTemplate.py:
801 install_cron_daemon() treats "none" specially
802
803 14 Aug 2005; Preston Cody <codeman@gentoo.org>
804 old patch from Steven Mertens to resolve bug #96642
805 numerous asthetic changes to GenDialog, no real functionality changes though.
806 strings renamed for global use if necessary.
807 fix all three parts of bug 102291
808 disable set_etc_portage until fully-written.
809
810 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
811 src/GLIClientController.py:
812 lower-case http/ftp proxy envvars
813
814 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
815 src/GLIClientController.py:
816 log end of pre_install steps to aid in debugging
817 src/templates/x86ArchitectureTemplate.py:
818 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
819
820 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
821 src/GLIArchitectureTemplate.py
822 check to make sure that the device node we're wait for to exist isn't of
823 type 'free'
824
825 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
826 src/GLIGenDialog.py:
827 convert install_packages to list in set_extra_packages()
828 check return code of checklist() call in "Manual" section
829 *actually* fix the first problem
830
831 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
832 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
833 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
834
835 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
836 src/GLIArchitectureTemplate.py:
837 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
838
839 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
840 Add CDATA support to SimpleXMLParser and add utility functions for it.
841
842 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
843 src/GLIArchitectureTemplate.py:
844 Fix case where vixie-cron is specified as a full package atom, as we still
845 don't want to run 'crontab /etc/crontab' for it.
846
847 *GLI-0.1 (3 Aug 2005)
848
849 30 Jul 2005; Preston Cody <codeman@gentoo.org>
850 add scp to list of is_uri() so GenDialog doesn't complain.
851 fixed livecd-kernel bug in bootloader code.
852 fixed gendialog for dynamic_stage3 instead of "networkless"
853 change bootloader to allow for both initrd and initramfs.
854 fix IP for dynamic_stage3.
855 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
856
857 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
858 Added full scp:// URI support to get_uri() in GLIUtility
859 Remove "networkless" from dynamic stage3 if locic.
860 Remove print statement from scp:// code.
861 Change scp code to check for "assword: " instead of "Password:"
862 Fix post-install network code to create net.eth1+ symlink correctly
863 Check to make sure pkg can be split on / and some debugging code
864 Add 2>dev/null to emerge call in _get_packages_to_emerge()
865 SimpleXMLParser handles True/False/None correctly now
866 Comment out above fix
867 Add partitioning wait-for-device-to-exist code to mount_local_partitions
868
869 28 Jul 2005; Scott Myron <samyron@gentoo.org>
870 Removed a FIXME in the GLIClientConfiguration that is no
871 longer needed.
872
873 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
874 Default to x86 in ClientConfig
875 Typo in build-a-stage3 code.
876 Remove MAKEDEV call in build-a-stage3 postscript.
877
878 26 Jul 2005; Preston Cody <codeman@gentoo.org>
879 Rewrote init of IP for gli-d. Other GenDialog updates.
880 allow network_type to be None in CConfig.
881
882 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
883 Add _dynamic_stage3 option to IP.
884 Add check for that option to dynamic stage3 code in ArchTemplate.
885 Fix code to determine default route in get_eth_info() in GLIUtility.
886 Fix serialization of dns-servers in ClientConfig.
887
888 24 Jul 2005; Preston Cody <codeman@gentoo.org>
889 changed default values of cron/logger in IP.
890 moved GenDialog IP init out to the individual files. gli-dialog's version
891 will change quite a bit.
892
893 22 Jul 2005; Preston Cody <codeman@gentoo.org>
894 added ppcArchTemplate. blank now. working on yaboot.
895 modified ArchTemplate for amd64 and ppc custom kernels.
896 skeleton implementation of _configure_yaboot.
897 small fixes to other templates.
898
899 21 Jul 2005; Preston Cody <codeman@gentoo.org>
900 GenDialog updates. changed comment in IP.
901
902 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
903 src/GLIInstallProfile.py:
904 Fix codeman's screwup of changing the service seperator to ',' in the parser
905 without changing it in the serialization code! Also document this in a
906 comment so you find it easier. Everybody needs to make sure they update
907 their install profiles!
908
909 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
910 src/GLIArchitectureTemplate.py:
911 Fix casting of list to string and concat of None with string, as well as
912 commented prototype of checking that mounting actually worked (found a case
913 where mount can return success, but the mount won't be done).
914
915 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
916 src/templates/x86ArchitectureTemplate.py:
917 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
918 checking for the device, and sleeping 1 second each time.
919
920 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
921 src/templates/x86ArchitectureTemplate.py:
922 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
923 bootloader works again. Also rename _install_{grub,lilo} to
924 _configure_{grub,lilo} since they don't install the loaders anymore
925 themselves.
926
927 7 Jul 2005; Preston Cody <codeman@gentoo.org>
928 fix global USE flags to not include the arch types at the end.
929 updates to GenDialog and gli-d.
930
931 6 Jul 2005; Preston Cody <codeman@gentoo.org>
932 fixing bootloader code for no initrd and initrd->initramfs naming change.
933
934 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
935 Proper comments and parameters to GLIException in install_mta()
936 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
937 Add strip() to list_mirrors(), list_subarch_from_mirror() and
938 list_tarball_from_mirror() to eliminate blank last item.
939
940 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
941 Added stage3 generation code.
942
943 5 Jul 2005; Preston Cody <codeman@gentoo.org>
944 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
945 Mild changes to GenDialog.
946
947 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
948 Remove separate install step configure_rc_conf() since it's handled by
949 update_config_files()
950 Make a copy of newvalues in _edit_config() so quotes aren't added when the
951 function is called twice on the same file.
952
953 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
954 Missing \ in sed in _get_packages_to_emerge()
955 Removed explicit emerging of hotplug and no longer add it to the runlevel.
956 Check in _quickpkg_deps() to ignore blank package names returned from
957 _get_packages_to_emerge()
958
959 28 Jun 2005; Preston Cody <codeman@gentoo.org>
960 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
961 in the dialog.py gauge code.
962
963 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
964 Add code to update_config_files() to go through etc_files and update stuff.
965 Check to see that _etc_files['make.conf'] exists in get_make_conf()
966 Only use float() in partition xml parsing code if type == "free"
967
968 28 Jun 2005; Preston Cody <codeman@gentoo.org>
969 finished almost all internationalization of GenDialog.
970 attempt at fixing rc.conf function. moved 3 generate functions out of
971 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
972 added dialog.py to the fe/dialog directory so it actually gets used.
973
974 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
975 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
976
977 27 Jun 2005; Preston Cody <codeman@gentoo.org>
978 fix extra entry in list_mirrors()
979 beginning internationalization runthrough.
980
981 26 Jun 2005; Preston Cody <codeman@gentoo.org>
982 added dialog.py to /src temporarily until it gets accepted upstream.
983 fix for unused value in form in dialog.py and changed heights.
984 fix GenDialog forms.
985
986 25 Jun 2005; Preston Cody <codeman@gentoo.org>
987 Changed hostname/domainname for new baselayout.
988 Changed _add_to_runlevel errors to logs.
989 Updated TODO list to show status of GenDialog
990 More updates to GenDialog including two checklists that probably won't work.
991 update IP to use comma-separated list instead of space separated for services.
992
993 24 Jun 2005; Preston Cody <codeman@gentoo.org>
994 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
995 GenDialog as it gets closer to completion.
996
997 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
998 Modify get_eth_info() to take a full interface name (eth0 fex). float()
999 instead of int() in add_partition_device_partition() for minor (closes 96804)
1000
1001 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1002 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1003 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1004 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1005
1006 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1007 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1008 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1009 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1010 Fix undefined variable 'output' issue in spawn().
1011
1012 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1013 More updates to GenDialog and gli-d.
1014
1015 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1016 Modify list_mirrors() to return a list of mirror URL/name pairs.
1017
1018 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1019 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1020 get subarch.
1021
1022 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1023 Backend partitioning will create disklabel is none exists. Installprofile
1024 defaults to "" now instead of "msdos" for disklabel type. Fix for
1025 mount_local_partitions() to remember device along with minor in the
1026 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1027 add else block to log unsupported netmount types to mount_network_shares()
1028
1029 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1030 src/GLIArchitectureTemplate.py:
1031 Refactor kernel_compile common stuff, fix 2.4 build process.
1032 src/fe/cli/clife.py:
1033 Logging system.
1034 src/GLIUtility.py, src/GLIStorageDevice.py:
1035 Add comments about re-writes needed for boxes without sysfs.
1036
1037 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1038 src/GLIArchitectureTemplate.py:
1039 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1040 'make dep' call for custom compile. build_mode support for prepare-only and
1041 none types completed. custom compile function chains shell functions in
1042 spawned script, to allow for catching all errors.
1043
1044 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1045 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1046 and GenDialog. other gendialog updates as well. kernel updates untested.
1047
1048 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1049 src/GLIInstallProfile.py:
1050 Change structure of etc-portage stuff. The serialization was broken before my
1051 last commit, and I am the only person that's ever used it. The new schema is
1052 as follows:
1053 <etc-portage>
1054 <file name="package.mask"/>
1055 <file name="package.unmask">
1056 <entry atom="sys-kernel/openmosix-sources"/>
1057 </file>
1058 <file name="package.use">
1059 <entry atom="sys-libs/db">
1060 -java
1061 </entry>
1062 <entry atom="dev-libs/cyrus-sasl">
1063 -ldap
1064 </entry>
1065 </file>
1066 </etc-portage>
1067
1068
1069 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1070 src/GLIInstallProfile.py:
1071 Add new entry for gli-profile/kernel-build-method item. Add missing
1072 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1073 keys in the same order.
1074
1075 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1076 src/GLIArchitectureTemplate.py:
1077 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1078 was repeatedly appended to make.conf.
1079
1080 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1081 src/GLIArchitectureTemplate.py:
1082 Put some Linux-2.6 specific code under a if statement. Store list of
1083 successfully mounted swap device for using swapoff. Add proper error checking
1084 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1085 'file'. Clean up some redundant code (thanks to pychecker).'
1086
1087 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1088 Fix typos: get_extended() instead of get_extended_partition(). Added
1089 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1090 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1091
1092 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1093 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1094 in add_network_interface.
1095
1096 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1097 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1098 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1099 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1100 prepare_chroot.
1101
1102 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1103 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1104 +src/fe/installer-gtk:
1105 Add new automated CLI frontend. Add scripts that are the intended means to
1106 use each frontend.
1107
1108 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1109 src/GLIClientController.py:
1110 Add null type to network config, for cases where the interface is already up
1111 and should not be touched (netboot for example).
1112
1113 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1114 src/GLIArchitectureTemplate.py:
1115 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1116 string!. Try to use binary packages if available by default.
1117
1118 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1119 src/GLIArchitectureTemplate.py:
1120 More error checking for _add_to_runlevel, to ensure that the init script
1121 actually exists before we try to add it. set_services phase must take place
1122 after the package installation, otherwise the init scripts might not exist.
1123 Find the correct init script for the cron and logging daemons, and add that
1124 instead of the package atom.
1125
1126 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1127 src/GLIArchitectureTemplate.py:
1128 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1129 usage of 'file' to 'contents' for the variable name, as it shadows
1130 __builtin__.file.
1131
1132 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1133 src/GLIArchitectureTemplate.py:
1134 Add MTA install code, and include MTA install phase. Ensure
1135 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1136 for 'none' kernel config for build_kernel phase. Put kernel_script in
1137 /var/tmp instead of /root for build_kernel phase.
1138
1139 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1140 Rename mta variables to match syslog/cron variables.
1141
1142 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1143 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1144 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1145 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1146 src/templates/.cvsignore, src/tests/.cvsignore:
1147 Refactor partition formatting again to include error checking. Allow 'none'
1148 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1149
1150 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1151 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1152 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1153 only have a single spawn call.
1154
1155 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1156 refixed samyron's fix of set_architecture_template.
1157
1158 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1159 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1160 be executable.
1161
1162 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1163 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1164 error checking when you call set_architecture_template.
1165
1166 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1167 moved the mkfsopts input to the partition options menu instead of the during
1168 the creation process. updated GenDialog to say it supports reiserfs v3.
1169
1170 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1171 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1172 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1173 Add support for other partition types to dialogfe.
1174 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1175 avoid integer overflows and wraparounds.
1176
1177 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 Removed start/end from XML output and added mkfsopts to partitioning info.
1179 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1180 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1181 in GLIClientConfiguration. Change from .1 and .9 to constants for
1182 partitioning. Fix free space overwriting bug. Remove a few unused functions
1183 from rewrite. Fix call to get_partition_at()
1184
1185 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1186 Updates to GenDialog and dialogfe.
1187
1188 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1189 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1190
1191 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1192 more GenDialog updates to partitioning.
1193
1194 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1195 Indenting issue in GLISD/get_ordered_partition_list.
1196 updates to GenDialog partitioning and added default UTC for timezone in IP.
1197
1198 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1199 Added GLISD.get_model()
1200
1201 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1202 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1203 More updates to GenDialog :)
1204
1205 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1206 Added get_interface_realname() function.
1207
1208 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1209 Added auto-save of CConfig and copying to new /root after install.
1210 yet even more GenDialog updates.
1211
1212 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1213 removed print statement from GLISD. more updates to GenDialog.
1214
1215 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1216 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1217 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1218 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1219 places in GLIClientConfiguration.
1220
1221 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Fix mount_local_partitions(), configure_fstab(), and
1223 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1224 A few more fixes for templates/x86Archtemplate
1225
1226 27 May 2005; Preston Cody <codeman@gentoo.org>
1227 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1228 a work in progress.
1229
1230 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1231 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1232 directly. GLISD can now handle data imported from XML.
1233
1234 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1235 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1236 handle blank (no disklabel) disks.
1237
1238 20 May 2005; Preston Cody <codeman@gentoo.org>
1239 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1240 up, documented, and separated out serialization and grouped all sections.
1241
1242 19 May 2005; Preston Cody <codeman@gentoo.org>
1243 Reorganization of ClientConfiguration and gutting of unused functions.
1244 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1245
1246 18 May 2005; Preston Cody <codeman@gentoo.org>
1247 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1248
1249 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1250 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1251 partitioning. CC serializes install profile to disk and prepare_chroot()
1252 copies it into /mnt/gentoo/root
1253
1254 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1255 Moved URI parsing into new function parse_uri()
1256
1257 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Added XMLParser module.
1259
1260 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1261 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1262 Minor fix to is_uri() regex to allow hyphens in hostname.
1263
1264 12 May 2005; Preston Cody <codeman@gentoo.org>
1265 Updated finishing_cleanup for new unmounting method from agaffney.
1266
1267 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1268 Fix GLILogger to use correct time format string. Fix _edit_config() to
1269 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1270 unicode support to is_realstring().
1271
1272 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1273 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1274 return value instead of non-zero. Add code to output a traceback to the
1275 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1276 instead of --nocolor.
1277
1278 10 May 2005; Preston Cody <codeman@gentoo.org>
1279 Added GLIGenDialog.py to make a generic class for the dialog functions that
1280 can be used by both dialogfe and the netfe/be. updated both for new filename.
1281 date changes. 2004->2005.
1282
1283 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 Removed 'quiet=True' from spawn() calls
1285
1286 10 May 2005; Preston Cody <codeman@gentoo.org>
1287 Updated GLIUtility with patches from chotchki. Also added documentation
1288
1289 9 May 2005; Preston Cody <codeman@gentoo.org>
1290 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1291 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1292 from bug #89683, mostly touchups.
1293
1294 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1295 GLIStorageDevice cleanup patch from bug #91761
1296
1297 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1299 _edit_config(). Error logging casts 'error' to str
1300
1301 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 Exceptions received in CC are logged before being passed to the FE. Added
1303 code to CC to handle exceptions *not* thrown by the installer itself.
1304
1305 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1306 get_max_mb_for_resize() returns -1 if not self.resizeable
1307
1308 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 More dirty rsync hacks :-/
1310
1311 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1312 Patches from chotchki (bug #90325) to improve CC networking. untested.
1313
1314 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1315 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1316 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1317 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1318 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1319 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1320 _get_packages_to_emerge()
1321
1322 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1323 Added group-adding code to set_users in ArchTemplate
1324
1325 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1326 Added post-install script code
1327
1328 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 Fixed encapsulation issues in GLIClientController (bug #90141)
1330
1331 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1332 Update resizing code in GLIStorageDevice
1333
1334 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1335 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1336
1337 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1338 Reverted change to ArchTemplate and added support for commented line in old
1339 code.
1340
1341 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Changed _edit_config() to modify value in-place instead of commenting out and
1343 adding the new value to the end of the file.
1344
1345 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1346 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1347 Also updated TODO list.
1348
1349 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Use blackace's one-liner to add comments for all function for use with
1351 pythondoc.
1352
1353 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 Moved 'end >= device_sectors' check out of loop to check for next partition's
1355 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1356 Partitioning code now tracks start/end of extended for placing logicals. End
1357 point of logical is now adjusted along with start.
1358
1359 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1360 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1361 the way of partitioning from a blank disk. Add int() around access to minor
1362 key in partition information due to new partition code leaving them as float.
1363
1364 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1365 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1366
1367 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1368 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1369
1370 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1371 Added support for DHCP options and MAC addresses in the InstallProfile.
1372
1373 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1375 sed to properly strip out junk.
1376
1377 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1378 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1379 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1380
1381 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1382 Fixed indent problem in GLICController
1383
1384 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 Check for disklabel type "loop" and use the device name without a minor.
1386
1387 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Remove /tmp/compile_output.log and /var/log/install.log when install is
1389 complete. Added code to (hopefully) keep 2nd thread running after install.
1390 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1391 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1392 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1393
1394 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1395 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1396 when unpacking tarball.
1397
1398 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1399 rewrote filesystem_tools. looks like it works so ripping out all the old
1400 filesystem_tools code.
1401
1402 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1403 Changed the print statements to logging in the partitioning BE code.
1404 the logger may need to be imported to the x86archtemplate. unknown yet.
1405 Added the finishing_cleanup function.
1406 added a fix to the logger from BenUrban
1407
1408 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1409 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1410 URIs. The blank uri check has been commented out.
1411 ripped out error checking of set_services. this is done by _add_to_runlevel.
1412
1413 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1414 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1415
1416 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1417 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1418 the install profile if available. Commented out spawn() debugging prints
1419
1420 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1421 small changes to setup_network_post. moved adding to runlevel of net.x to
1422 after the device gets symlinked. added domainname runlevel command.
1423
1424 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1425 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1426 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1427 spawn() call in livecd-kernel code to pass environment variables.
1428 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1429 the install profile if available.
1430
1431 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1432 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1433 to handle installing the livecd kernel into the new system.
1434
1435 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1436 should emerge hotplug and coldplug before adding them to runlevel.
1437
1438 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1439 took chroot out of grub_install command.
1440
1441 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1442 Changed chroot wrapper code in spawn() to write the wrapper the python way
1443 instead of the bash way to avoid quote conflicts. Added
1444 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1445 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1446 as it breaks the piping.
1447
1448 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1449 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1450
1451 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1452 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1453 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1454 GLIInstallProfile.
1455
1456 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1457 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1458 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1459 into /mnt/gentoo in prepare_chroot()
1460
1461 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1462 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1463 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1464 to start/end sectors
1465
1466 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1467 Add 2>&1 to cmd in spawn()
1468
1469 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1470 Modified GLIUtility.exitsuccess() to work with return value from
1471 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1472 creates wrapper script for commands run inside chroot so multiple commands
1473 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1474 for the generated script from spawn()
1475
1476 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1477 Removed default values for stage tarball URI and portage tree URI from
1478 InstallProfile. These should be set by the FEs. also added services step to
1479 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1480 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1481
1482 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1483 Small fix for setting the default gateway. Also added feature to dialogfe.
1484
1485 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1486 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1487
1488 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1489 Fixed a bunch of true -> True typos. lots of em
1490 only write new resolv.conf if there are dns servers listed.
1491
1492 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1493 Commented out 'display_on_tty8=True' in start_portmap()
1494
1495 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1496 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1497
1498 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1499 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1500 lang parameter to __init__()
1501
1502 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1503 updates to TODO list.
1504
1505 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 Initial code for quickpkg GRP support. Fix loop to grab packages from
1507 'emerge -p blah'
1508
1509 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1510 check for dhcp in the network stuff and emerge it if it is.
1511 added quickpkg to TODO list
1512
1513 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1514 Changed the raising of 'warning' exceptions to a simple log of the error
1515 so that the installer can continue.
1516
1517 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1518 Some big changes. First, changed most output to display_on_tty8.
1519 Second, added log lines to all templates. Some smaller fixes such as typos.
1520 Also did some cleanups of old commented lines.
1521
1522 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1523 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1524 Undo change with fix. Escaping fix in GLIStorageDevice.py
1525
1526 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1527 more updates to TODO list. hopefully we'll soon start removing items instead
1528 of adding them.
1529
1530 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1531 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1532
1533 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1534 updated TODO list. (again)
1535
1536 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1537 changed output of portmap start to display_on_tty8.
1538 fixed bootloader for udev and multiple kernels
1539 fixed custom kernel config (again)
1540
1541 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1542 changed default value of CC._enable_ssh to True because this is smart.
1543 added code to allow custom kernel .config. may be unstable and break. sorry.
1544
1545 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1546 partition() now waits until after it checks for partition flags before delete
1547 the partitions :P
1548
1549 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1550 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1551 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1552 blank.
1553
1554 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1555 Various fixes related to the add_users function. Still not yet finished.
1556 Added things to the TODO list. Lets start using that!
1557
1558 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1559 Added code to x86Template to format newly created partitions. Also added
1560 some error checking code. GLIStorageDevice passes 'minor' with data to
1561 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1562 mounting code.
1563
1564 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1565 Took out unnecessary setting of random livecd root password. the cd already
1566 sets it randomly.
1567
1568 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1569 Took out an unneeded step from CC's run()
1570
1571 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1572 Attempt at detecting and adding windows partitions to lilo.
1573
1574 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1575 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1576 partition. fixed misc exit_status => exitstatus typo.
1577
1578 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1579 Added basic code for resizing filesystems with pyparted. Fixed code for
1580 resizing ntfs and ext2/3.
1581
1582 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1583 Fixed partition() in x86Template so that it scans through logicals and deletes
1584 before deleting containing extended partition. Also clears partition table to
1585 be safe before third pass.
1586
1587 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1588 Added mount_network_shares. not able to test it from this computer.
1589 will test when i get back to school.
1590 also added start_portmap to the client_controller as an always-do.
1591 agaffney says this is needed for NFS mounts to work.
1592
1593 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1594 Partial rewrite of partitioning code in x86Template. No longer shells out to
1595 parted to perform actions, now uses all pyparted calls. Code "works" in a
1596 test, but still needs lots of TLC. Also modified tests/install.py to work
1597 with x86Template and GLIClientConfiguration.
1598
1599 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1600 Initial move of partitioning code from ArchTemplate to x86Template.
1601
1602 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1603 Added grp_install and services to InstallProfile. forgot about the set_root_password
1604
1605 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1606 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1607 Test Install ran very well (skipping partitioning).
1608
1609 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1610 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1611 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1612 some may still have eluded me.
1613
1614 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1615 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1616 Just finished mount_local_partitions in GLIArchitectureTemplate
1617
1618 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1619 Added get_num_sectors() to GLIStorageDevice.
1620
1621 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1622 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1623 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1624 from GLIInstallProfile.
1625
1626 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1627 GLIStorageDevice returns "unknown" instead of "" for get_type()
1628
1629 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1630 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1631 actually work. Commented out resizability checking code for speed.
1632
1633 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1634 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1635 GLIStorageDevice at the suggestion of plors
1636
1637 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1638 Added a function to GLIUtility to pull a value from a make.conf-style config
1639 file. Minor type fix to GLIInstallProfile.py
1640
1641 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1642 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1643 network mounts from partition data structure in GLIInstallProfile
1644
1645 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1646 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1647 can be resized.
1648
1649 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1650 Added some of the final functions to GLIInstallTemplate.
1651 Yes this project is still active despite rare use of the Changelog!
1652
1653 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1654 Added the GLIPartitionTools.py file. This is a temporary insertion of
1655 partitioning tools that will eventually go into their own package.
1656
1657 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1658 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1659 for the program). Added __init__(install_profile, client_configuration) to
1660 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1661 to avoid constantly passing stuff every time we call a method.
1662
1663 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1664
1665 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1666 files without messing up all the other stuff in them. This will be used for making
1667 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1668
1669 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1670
1671 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1672 have a few basic things. I added two private methods. One is _depends(). This
1673 will be used for dependency checking (ie. unpacking a tarball requires that
1674 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1675 same syntax as os.system(), however, instead of being run in the liveCD
1676 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1677 isolated the code. Hope to work more this week to get this class formed...
1678
1679 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1680
1681 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1682 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1683 to allow for easier modification (mutable, rather than immutable objects). Updated
1684 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1685 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1686 Added initial unit test code.
1687
1688 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1689
1690 Added initial changelog. Setting up the basic structure of the CVS repository
1691 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1692 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20