/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1320 - (show annotations) (download)
Tue Feb 28 16:12:30 2006 UTC (8 years, 9 months ago) by agaffney
File size: 70034 byte(s)
  src/GLIArchitectureTemplate.py:
  ignore extended partitions in mount_local_partitions()

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.605 2006/02/28 16:12:30 agaffney Exp $
5
6 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIClientController.py:
8 accept 'none' as well as 'null' for network type
9 src/GLIArchitectureTemplate.py:
10 ignore extended partitions in mount_local_partitions()
11
12 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
13 src/GLIPortage.py:
14 copy_pkg_to_chroot() uses compile_output.log for command output
15
16 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
17 only keep a 1000 line 'scrollback' buffer for the compile output and log file
18
19 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/GLIPortage.py:
21 add code make GLIPortage.py capable of being run stand-along for dynamic
22 stage3 generation and copying packages in a GRP-ish way
23 grp code fixups
24
25 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
26 src/GLIPortage.py:
27 ignore blank packages passed to get_deps() and emerge()
28
29 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
30 src/GLIUtility.py:
31 add get_chosts() function
32
33 *GLI-0.3 (12 Feb 2006)
34
35 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
36 src/templates/x86ArchitectureTemplate.py:
37 pull old start/end sector values from somewhere that actually has them
38 add logic for extended partition to code that makes sure new end sector
39 doesn't overlap start sector of next partitions
40 don't freak out if partition can't be deleted
41
42 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
43 src/GLIPortage.py:
44 run env-update at the end of copy_pkg_to_chroot()
45
46 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47 src/templates/x86ArchitectureTemplate.py:
48 I'm a complete fscking dumbass. I recorded the end sector for partitions that
49 weren't being touched, but I never used it when recreating them...the end was
50 calculated from the size in MB instead :/
51
52 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIArchitectureTemplate.py:
54 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
55 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
56 src/GLIPortage.py:
57 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
58 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
59 'resized' flag
60
61 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
62 src/GLIPortage.py:
63 short circuit and check vdb directly if package begins with '='
64
65 8 Feb 2006; Preston Cody <codeman@gentoo.org>
66 added more packages to extra_packages list in IP
67
68 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
69 src/templates/x86ArchitectureTemplate.py:
70 10 tries to create filesystem instead of 3
71 src/GLIPortage, src/GLIArchitectureTemplate.py:
72 ignore_missing flag for copy_pkg_to_chroot()
73
74 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
75 src/GLIPortage.py:
76 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
77
78 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
79 src/net/server/gliserv.py:
80 fix handling of 404 for real files
81 src/net/server/GLIServerProfile.py:
82 look for 'hostname' in attributes instead of 'name'
83
84 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
85 src/SimpleXMLParser.py:
86 initial support for 'include' in XML files
87 src/GLIStorageDevice.py:
88 initial support for %
89 src/GLIClientController.py:
90 add debugging statements to pre-install steps
91
92 15 Jan 2006; Preston Cody <codeman@gentoo.org>
93 webgli/configfiles:
94 check for key in etc_files['rc.conf'] to fix key error
95 webgli/timezone: small fix.
96 webgli/extrapackages: list-type fix
97 webgli/services: same
98 glimd: add/edit_client updates.
99
100 12 Jan 2006; Preston Cody <codeman@gentoo.org>
101 added configure.pyhtml to glimd. minor changes
102 to top and add_client. fixed up showargs.
103 added execute.pyhtml
104 changed register clients line in gliserv for name->hostname.
105 updated TODO.
106
107 10 Jan 2006; Preston Cody <codeman@gentoo.org>
108 src/net/server/*:
109 added add/del/edit client/profile.pythml for glimd.
110 updated templates, showclients, and gliserv.
111
112 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
113 src/net/server/*:
114 stupid threading module...
115
116 8 Jan 2006; Preston Cody <codeman@gentoo.org>
117 AT: rc.conf -> conf.d/clock
118
119 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
120 src/GLIPortage.py:
121 show 'Calculating dependencies for ...' in subprogress bar at beginning of
122 emerge()
123 src/GLIArchitectureTemplate.py:
124 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
125 in the chroot
126 remove _quickpkg_deps() and _portage_best_{visible,version}()
127 src/GLIUtility.py:
128 fail immediately in validate_uri() if provided URI can't be parsed
129 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
130 debug code in spawn()
131 use lower-level os.read() instead of file.read() because python sucks
132 src/templates/x86ArchitectureTemplate.py:
133 basic subprogress reporting for partitioning
134 total_steps was 1 too high
135
136 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
137 src/GLIUtility.py:
138 move parse_vdb_contents() to GLIPortage
139 src/GLIPortage.py:
140 remove all symlink fixups
141 ignore 'dir' entries in CONTENTS
142 call tar with -p
143
144 5 Jan 2006; Preston Cody <codeman@gentoo.org>
145 AT: bootsplash is now gensplash
146 gliserv: add advanced_mode to shared_info
147 webgli: Added advanced mode. mostly just disables a few screens.
148
149 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
150 src/GLIPortage.py:
151 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
152 added emerge()
153 update sub-progress after each package is emerged
154 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
155 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
156 remove link if it exists before moving content into place
157 src/GLIArchitectureTemplate.py:
158 install_packages() now calls emerge() in GLIPortage
159 change all calls to self._emerge() to self._portage.emerge()
160 comment out all emerge status checking...using exceptions now
161 call copy_pkg_to_chroot() directly for livecd-kernel
162
163 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
164 src/GLIArchitectureTemplate.py:
165 remove add_pkg_to_world() and copy_pkg_to_chroot()
166 copy installer.log to installer.log.failed on install failure
167 src/GLIUtility.py:
168 added get_keymaps()
169 spawn() takes any False argument for chroot instead of just None
170 src/GLIPortage.py:
171 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
172 change copy_pkg_to_chroot() to work properly with use_root=False
173 figure PORTAGE_TMPDIR properly
174
175 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
176 src/net/server/html/*:
177 converted showclients, load/saveprofile
178
179 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
180 src/GLIPortage.py:
181 exclude packages already in chroot vdb from binary deplist
182 chroot to use best_version for chroot's vdb
183 src/runtimedeps.py:
184 accept ROOT via commandline instead of env
185
186 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
187 src/runtimedeps.py:
188 remove passing of ROOT
189 src/GLIPortage.py:
190 modify get_deps() to get deptree for each package and merge into final list
191 remove depgraph class
192 add debugging code to get_deps()
193 src/GLIArchitectureTemplate.py:
194 combine code for GRP/compile in install_packages() into one block
195 debugging code in install_packages()
196
197 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/runtimedeps.py:
199 initial commit
200 src/GLIPortage.py:
201 use separate script for GRP deps
202 remove calls to portage module
203
204 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
205 src/GLIPortage.py:
206 initial commit
207 move some of portage function from GLIAT
208 flipped around a few function args
209 src/GLIArchitectureTemplate.py:
210 revamp install_packages() for new GLIPortage
211
212 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
213 src/GLIArchitectureTemplate.py:
214 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
215
216 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
217 src/net/server/gliserv.py:
218 wrap generated code in a class to isolate it a bit better
219 302 redirects work
220 don't use cgi.escape() for <% %>
221 src/net/server/html/webgli/*:
222 load/save profile
223 src/GLIUtility.py:
224 change /sbin/lspci to just lspci
225
226 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIClientController.py:
228 change ordering of statements in CC run() while loop to not go past the end
229 of the array
230 src/GLIArchitectureTemplate.py:
231 removed redundant bind mounts
232
233 18 Dec 2005; Preston Cody <codeman@gentoo.org>
234 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
235 added a diagram by blackace from last night.
236 added the glossary in RTF format.
237
238 17 Dec 2005; Preston Cody <codeman@gentoo.org>
239 x86AT: separated out emerge/configure from running of bootloader
240 added MBR drive support to lilo.
241 these changes will likely not work.
242 AT: added setup_and_run_bootloader step.
243
244 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
245 src/net/server/gliserv.py:
246 call generated code in a function
247 src/net/server/html/webgli/*:
248 include top/bottom
249 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
250 src/GLIClientCongifuration.py:
251 install mode magic
252
253 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
254 src/GLIClientController.py:
255 use GLIException when there's an import problem
256 added debug code to show install_steps
257 src/templates/amd64ArchitectureTemplate.py:
258 add . to import path
259 proper path this time: ../../templates
260 src/GLIArchitectureTemplate.py:
261 add _portage_best_version() function
262
263 11 Dec 2005; Preston Cody <codeman@gentoo.org>
264 added initial glossary and gimli diagram to the docs directory.
265 modify gli-dialog to allow editing of the install_profile after loading XML.
266
267 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
268 src/net/server/html/webgli/:
269 converted globaluse, localuse, networkmounts, portagetree, and stageselection
270 moved saveclientconfig stuff into clientconfig
271 moved saveconfigfiles into config files
272 converted etc_portage and makedotconf
273 converted bootloader and kernel
274 convert daemons, extrapackages, networking, review, services, timezone, users
275 src/net/server/gliserv.py:
276 proper 404 handling for .pyhtml extension
277 HTML escape <% %> stuff
278 work around python's sucky regexes
279 src/GLIInstallProfile.py:
280 allow set_{rsync,ftp,http}_proxy() to accept empty values
281
282 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
283 src/net/server/gliserv.py:
284 initial commit of Legolas templating engine
285 302 redirects
286 src/net/server/html/index.html, src/net/server/webgli_template.html:
287 minor changes for new code
288 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
289 initial commit of the conversion from the monolithic WebGLIHandler.py to the
290 one file per path Legolas goodness
291 partitioning[2-4] done
292
293 5 Dec 2005; Preston Cody <codeman@gentoo.org>
294 webgli: dhcp options in CC and post-install.
295 updated comparison chart.
296 webgli: etc/portage/* and distcc support added. not too-well tested.
297
298 4 Dec 2005; Preston Cody <codeman@gentoo.org>
299 webgli_template.html: valign=top on left side.
300 webgli: fix bootloader boot_device. now working.
301 webgli: CC proxy done. post-install proxy in progress.
302
303 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
304 src/net/server/webgli_template.html:
305 increase padding for content cell to 7px and add colspan=2
306
307 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
308 webgli: added graphic bar on top
309 webgli: added hover effects on the links on the left
310 webgli: re-rendered header_bg.png to stretch without artifacts
311
312 3 Dec 2005; Preston Cody <codeman@gentoo.org>
313 webgli: make.conf disabling fixes for dynamic_stage3
314 fixed portage snapshot browse popup
315 all changes tested.
316 webgli: add debug mode to CC screen. the screen still needs lots of work.
317
318 1 Dec 2005; Preston Cody <codeman@gentoo.org>
319 added debug mode question to gli-dialog
320 added CC proxies to CC networking for gli-dialog
321 webgli: fixed skip CC networking if connection active
322 webgli: portage snapshot defaults to CD
323 webgli: bootloader mbr drive selection
324 webgli: USE flags unselectable if dynamic_stage3
325 webgli: manual extra packages and save button.
326
327 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
328 src/GLIUtility.py:
329 change ping count to 2
330 docs/comparison.html
331 initial commit
332
333 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
334 src/templates/x86ArchitectureTemplate.py:
335 fix map() issue with grub code
336 replace kernel_names and initrd_names loops with one-liners
337
338 27 Nov 2005; Preston Cody <codeman@gentoo.org>
339 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
340 initial gli-dialog support for recommended partitioning layout and clear.
341 failure cleanup now an option for gli-dialog.
342 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
343 added comparison list and updated TODO!
344
345 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIArchitectureTemplate.py:
347 fix to stage1() debug code
348 fix to stage2() debug code
349
350 26 Nov 2005; Preston Cody <codeman@gentoo.org>
351 some more bootloader code fixes. forgot boot_device != mbr_device.
352
353 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
354 src/GLIStorageDevice.py:
355 fix to unallocated space merging when last one is after part 4
356
357 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
358 src/GLIArchitectureTemplate.py:
359 small fix to debugging code in copy_pkg_to_chroot()
360
361 23 Nov 2005; Preston Cody <codeman@gentoo.org>
362 more bugfixes with bootloader code
363 gli-dialog side appears to work
364
365 21 Nov 2005; Preston Cody <codeman@gentoo.org>
366 initial adding of boot_device to backend.
367 initial boot_device support added to gli-dialog.
368 some fixes of my poor coding
369
370 20 Nov 2005; Preston Cody <codeman@gentoo.org>
371 converted gli-dialog to use the install_package_list.
372 gtkfe has already been converted by AllanonJL
373 new way working in gli-dialog now and added to webgli.
374 added set/get_boot_device() to IP
375
376 19 Nov 2005; Preston Cody <codeman@gentoo.org>
377 get_install_package_list added to InstallProfile. This can be used by the FEs
378
379 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
380 src/templates/x86ArchitectureTemplate.py:
381 call ls with '-1 --color=no'
382
383 16 Nov 2005; Preston Cody <codeman@gentoo.org>
384 added warning (#9) to GRP ppl about stage3 tarballs
385
386 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
387 src/GLIArchitectureTemplate.py:
388 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
389 confused
390
391 13 Nov 2005; Preston Cody <codeman@gentoo.org>
392 removed protocols from rc.conf screens
393 finished initial rc.conf and make.conf in webgli
394
395 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
396 src/net/server/gliserv.py:
397 add -h option to usage()
398 show time and request URI in debug mode
399 show client IP in debug mode
400 just use IP instead of trying to do a reverse lookup
401
402 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
403 src/net/server/gliserv.py:
404 'classier' 401 message
405 proper commandline parsing
406 help via -h
407 user/pass can be specificed via commandline option
408
409 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/server/gliserv.py:
411 basic HTTP auth
412
413 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/net/server/gliserv.py:
415 dynamic module reloading (yipee!)
416 send 'Last-Modified' header for real files
417 respond to HEAD with just headers
418 src/net/server/handlers/WebGLIHandler.py:
419 icons for drives
420
421 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/net/server/handlers/WebGLIHandler.py:
423 initial 'pretty' partition table display support
424 clicking partition in 'pretty' display works instead of radio buttons
425 radio buttons and pretty display work together
426 META redirect instead of javascript
427 pretty display stretches across entire screen
428 'Recommended layout' and 'Clear drive' functions
429 properly catch exceptions from do_recommended()
430 src/GLIArchitectureTemplate.py:
431 replace preinst, copy, postinst, rm steps with qmerge
432 whoops...that shouldn't have been commented out
433 create image_dir with -p in copy_pkg_to_chroot()
434 more generic of symlink crappiness
435 new copy_pkg_to_chroot() actually works now
436
437 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
438 src/GLIStorageDevice.py:
439 initial generic disk support
440 fixes for add_partition() code
441 src/net/server/handlers/WebGLIHandler.py:
442 added support for creating generic disks
443 add new partition working
444 save and delete partitions
445
446 6 Nov 2005; Preston Cody <codeman@gentoo.org>
447 webgli: Partitioning making progress.
448
449 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
450 src/GLIArchitectureTemplate.py:
451 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
452 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
453 dir) and works around /etc/gconf symlink problem
454
455 5 Nov 2005; Preston Cody <codeman@gentoo.org>
456 webgli: lots of updates. preliminary partitioning. extra packages works.
457
458 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
459 src/net/server/gliserv.py:
460 httpd now supports HTTPS and falls back to HTTP if not available
461 make fallback actually work
462 src/net/server/SecureXMLRPCServer.py:
463 SecureSocketServer is now threaded
464
465 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
466 src/net/client/gliclient.py:
467 try to use HTTPS for XMLRPC first and fallback to HTTP
468 pretend mode
469 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
470 HTTPS XMLRPC goodness from samyron
471 pass name of certificate
472
473 31 Oct 2005; Preston Cody <codeman@gentoo.org>
474 wegli: daemons and services screens done.
475
476 30 Oct 2005; Preston Cody <codeman@gentoo.org>
477 webgli: networking and users screens
478 added return_redirect to handler.py
479 loading and saving install/client profiles works for webgli now
480 Review also done
481
482 *GLI-0.2 (27 Oct 2005)
483
484 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
485 src/templates/x86ArchitectureTemplate.py:
486 properly check for bootloader emerge exist status with exitsuccess()
487 log output of grub install command
488 add --batch --no-floppy to grub command
489 grubinstallstring only gets logged if debug is on
490 src/GLIUtility.py:
491 update progress bar to 100% when process finishes
492
493 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
494 src/GLIClientController.py:
495 added debugging code for the interaction between the 2 threads via Event()
496 src/GLIUtility.py:
497 doubled the buffer size in spawn()
498 bump buffer size up to 16384
499 only report progress in 5% increments
500 src/GLIArchitectureTemplate.py:
501 kernelpkgs.txt support code
502 above disabled because it sucks
503 added add_pkg_to_world()
504
505 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
506 src/GLIArchitectureTemplate.py:
507 use tar | tar to copy files in copy_pkg_to_chroot()
508 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
509
510 23 Oct 2005; Preston Cody <codeman@gentoo.org>
511 DEBUGGING ADDED TO AT. verbose field added to CConfig.
512
513 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
514 src/net/server/gliserv.py:
515 / maps to index.html
516 look for actual files in html/
517 src/net/html:
518 new template
519 src/GLIUtility.py:
520 added parse_vdb_contents()
521 src/GLIArchitectureTemplate.py:
522 added copy_pkg_to_chroot()
523 added debug code to dynamic-stage3
524 switch dynamic-stage3 to new method
525 lots of bug fixes from adding debug code
526
527 22 Oct 2005; Preston Cody <codeman@gentoo.org>
528 webgli initial bootloader support + changed make.conf.
529 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
530
531 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
532 src/GLIUtility.py:
533 horrible tangled mess of code that is tarball unpacking subprogress display
534 add unpack progress to portage snapshot
535 use read() instead of readlines() in spawn()
536 only update progress bar for whole percents
537
538 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
539 src/templates/x86ArchitectureTemplate.py:
540 change call to 'grub' to use GLIUtility.exitsuccess()
541 add definition of 'build_mode' in _configure_lilo()
542 src/misc/updategtkfe, src/misc/updateglid:
543 fix so subshell is called in root shell
544
545 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/net/server/handlers/WebGLIHandler.py:
547 stage screen launches URI browser in sized window with various properties set
548
549 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
550 src/misc/updategtkfe:
551 updated to actually work
552 remove previous snapshot and extracted dir before downloading
553 src/misc/updateglid:
554 updated to actually work
555 src/templates/x86ArchitectureTemplate.py:
556 fixed bug where grub code was looking for 'root+root+file_name2'
557
558 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
559 src/net/server/handlers/WebGLIHandler.py:
560 URI browser
561 added mirror selection
562 src/GLIUtility.py:
563 ls via ssh strips off ending *
564
565 16 Oct 2005; Preston Cody <codeman@gentoo.org>
566 more updates to webgli. stage selection.
567
568 11 Oct 2005; Preston Cody <codeman@gentoo.org>
569 updated webgli with preliminary Network Mounts support.
570
571 9 Oct 2005; Preston Cody <codeman@gentoo.org>
572 GenDialog: string formatting and yes/no label fixes.
573 added WebGLI template for gliserv.py
574 added WebGLIHandler as well as a definition for it in gliserv.py
575 updates to the webgli files even though they won't be there for long.
576 Utility: remove exception for non-existant grppkgs.txt until the new livecd
577 goes public.
578
579 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
580 src/net/server/gliserv.py:
581 override dict to not be so anal
582 main server now loads separate module to handle requests
583 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
584 split out profile URLs into separate handler function
585 move handlers into subdirectory
586 add Welcome and Clients handlers
587
588 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
589 src/GLIUtility.py:
590 raise exception if password prompt received twice
591
592 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
593 src/GLIUtility.py:
594 removed rot13ify()
595
596 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
597 src/net/server/gliserv.py:
598 allow for param to be passed multiple times in GET
599 no XMLRPC functions return None
600 modify POST request parsing to only create a list if needed
601 fix GET request parsing so the list creation for multiple values works
602 src/net/client/gliclient.py:
603 various typo and type mismatch fixes
604 exit after exception
605
606 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/net/client/gliclient.py:
608 initial commit
609 pass MAC to XMLRPC functions
610 src/net/server/GLIServerProfile.py:
611 rename GLIClientsProfiles to GLIServerProfile
612
613 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
614 src/net/server/gliserv.py:
615 now handles POST requests
616 move majority of request handling code to common_handler() to reduce code
617 duplication
618 profile loading
619 client reg via XMLRPC goes into SharedInfo()
620 /showclients redesign
621 template fixes
622 allow handler functions to add/change headers
623 save profile
624
625 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/net/server/GLIClientsProfiles.py:
627 initial commit
628 src/net/server/template.html:
629 initial commit
630 src/net/server/gliserv.py:
631 add template mojo
632
633 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/net/server/gliserv.py:
635 XMLRPC mojo
636
637 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
638 src/GLIArchitectureTemplate.py:
639 add code in _edit_config() to comment line where variable is defined
640 previously
641 insert new line under previous definition of variable if it exists
642 small _edit_config() cleanup
643 src/GLIStorageDevice.py:
644 add clear_partitions() function
645 new sizes for recommended partition layout
646 automatically calculate swap size for recommended layout
647
648 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
649 src/templates/x86ArchitectureTemplate.py:
650 fat16 mojo
651
652 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
653 src/GLIStorageDevice.py:
654 prevent do_recommended() from being run twice
655 rewrite do_recommended() to be more robust
656 src/GLIArchitectureTemplate.py:
657 rework _edit_config() to not write duplicate entries
658
659 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
660 src/GLIStorageDevice.py:
661 added do_recommended() function to automatically created 256M/1G/* layout
662
663 17 Sep 2005; Preston Cody <codeman@gentoo.org>
664 src/gli-dialog.py: added set_distcc to the list
665 GenDialog: added set_distcc. untested.
666 IP: added install_distcc flag.
667 AT: added install_distcc function based on the flag. runs after build_kernel
668 changed AT spawn command for distcc for nodeps.
669
670 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
671 src/GLIUtility.py:
672 add rot13ify() function
673
674 16 Sep 2005; Preston Cody <codeman@gentoo.org>
675 src/GenDialog.py
676 added a sentence of text. unchecking support added.
677
678 15 Sep 2005; Preston Cody <codeman@gentoo.org>
679 src/GLIUtility.py
680 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
681 src/GenDialog.py
682 still working on extra_packages. transformed the list to new format.
683 added GRP indication to list. untested.
684 TODO lists updated.
685 src/fe/dialog/gli-dialog.py
686 spelling mistook.
687
688 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
689 src/GLIUtility.py:
690 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
691
692 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
693 src/GLIUtility.py:
694 add get_directory_listing_from_uri()
695 add http support to above
696 add ftp support to above
697 add scp support to above
698 src/GLIArchitectureTemplate.py:
699 "0" instead of 0 for key of single-element dict passed to _edit_config()
700
701 5 Sep 2005; Preston Cody <codeman@gentoo.org>
702 value_only -> only_value
703
704 3 Sep 2005; Preston Cody <codeman@gentoo.org>
705 gutted out all of etc_portage structure since it is now all handled by
706 etc_files
707
708 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
709 src/GLIArchitectureTemplate.py:
710 install_packages() sends progress update notifications
711 src/templates/x86ArchitectureTemplate.py:
712 increase sleep to 5s between format tries
713 src/GLIClientController.py:
714 pass 'self' to AT instead of 'self._pretend'
715
716 2 Sep 2005; Preston Cody <codeman@gentoo.org>
717 logger -> logger.log in x86AT
718
719 1 Sep 2005; Preston Cody <codeman@gentoo.org>
720 added set_etc_portage to IP. debugging gli-d's support for it.
721
722 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
723 src/templates/x86ArchitectureTemplate.py:
724 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
725
726 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
727 src/GLIArchitectureTemplate.py:
728 add _portage_best_version() function and rework install_packages() to allow
729 for future X of Y tracking
730 Use best_visible instead of best_version
731 tracked down and fixed missing = causing empty install extra packages
732 use = when emerging also
733 quickpkg hokey pokey
734 run _get_packages_to_emerge() again with -pk
735
736 22 Aug 2005; Preston Cody <codeman@gentoo.org>
737 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
738 the end of install_packages.
739 added updateglid to /src/misc
740 updated all core files with new GPL notice and copyright statement.
741
742 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
743 src/GLIUtility.py:
744 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
745 a snapshot in /mnt/cdrom/snapshots/
746 get_snapshot_from_cd() adds file:// at the beginning
747 change calls to extra package special case functions to 'self.blah'
748
749 21 Aug 2005; Preston Cody <codeman@gentoo.org>
750 src/ArchTemplate: changed "voodoo".
751 changed order of portage sync methods. made a fallback to webrsync if
752 normal emerge sync fails.
753 removed get_sources_from_cd because it is obsolete.
754 add special cases to install_packages. remove fatal exception on package
755 install failure b/c the box will still be bootable.
756 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
757 handled in the FEs.
758 src/GenDialog: added a bunch of code for dealing with x11-based packages.
759 awaiting testing.
760
761 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
762 src/GLIStorageDevice.py:
763 global try/except block around fs resizable detection code
764 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
765 install-failed cleanup function
766
767 18 Aug 2005; Preston Cody <codeman@gentoo.org>
768 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
769
770 16 Aug 2005; Preston Cody <codeman@gentoo.org>
771 GLIGenDialog:
772 add drive choices for loaded configs.
773 force snapshot for dynamic_stage3
774 init the snapshoturi input to the cd snapshot if not already selected.
775 if dynamic_stage3, skip the make.conf step.
776 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
777 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
778
779 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
780 src/GLIArchitectureTemplate.py:
781 manually call MAKEDEV in stage3-dynamic code
782 copy /etc/inittab.old to /etc/inittab in chroot
783 src/GLIUtility.py:
784 add beginning of validate_uri() function
785 add file:/// support to validate_uri()
786 single quotes when setting livecd password
787
788 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
789 src/GLIGenDialog.py:
790 change getmountpoint() to get_mountpoint()
791 src/misc/updategtkfe:
792 committed script to automatically download latest snapshot and run gtkfe
793 src/templates/x86ArchitectureTemplate.py:
794 fix _configure_lilo_add_windows() for IP -> GLISD stuff
795 src/GLIArchitectureTemplate.py:
796 give tmp_minor an initial value in mount_local_partitions so that the value
797 remain from the previous drive
798
799 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
800 src/templates/x86ArchitectureTemplate.py:
801 Fix _configure_lilo() for IP using GLISD stuff
802 src/GLIArchitectureTemplate.py:
803 install_cron_daemon() treats "none" specially
804
805 14 Aug 2005; Preston Cody <codeman@gentoo.org>
806 old patch from Steven Mertens to resolve bug #96642
807 numerous asthetic changes to GenDialog, no real functionality changes though.
808 strings renamed for global use if necessary.
809 fix all three parts of bug 102291
810 disable set_etc_portage until fully-written.
811
812 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
813 src/GLIClientController.py:
814 lower-case http/ftp proxy envvars
815
816 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
817 src/GLIClientController.py:
818 log end of pre_install steps to aid in debugging
819 src/templates/x86ArchitectureTemplate.py:
820 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
821
822 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
823 src/GLIArchitectureTemplate.py
824 check to make sure that the device node we're wait for to exist isn't of
825 type 'free'
826
827 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
828 src/GLIGenDialog.py:
829 convert install_packages to list in set_extra_packages()
830 check return code of checklist() call in "Manual" section
831 *actually* fix the first problem
832
833 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
834 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
835 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
836
837 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
838 src/GLIArchitectureTemplate.py:
839 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
840
841 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
842 Add CDATA support to SimpleXMLParser and add utility functions for it.
843
844 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
845 src/GLIArchitectureTemplate.py:
846 Fix case where vixie-cron is specified as a full package atom, as we still
847 don't want to run 'crontab /etc/crontab' for it.
848
849 *GLI-0.1 (3 Aug 2005)
850
851 30 Jul 2005; Preston Cody <codeman@gentoo.org>
852 add scp to list of is_uri() so GenDialog doesn't complain.
853 fixed livecd-kernel bug in bootloader code.
854 fixed gendialog for dynamic_stage3 instead of "networkless"
855 change bootloader to allow for both initrd and initramfs.
856 fix IP for dynamic_stage3.
857 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
858
859 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
860 Added full scp:// URI support to get_uri() in GLIUtility
861 Remove "networkless" from dynamic stage3 if locic.
862 Remove print statement from scp:// code.
863 Change scp code to check for "assword: " instead of "Password:"
864 Fix post-install network code to create net.eth1+ symlink correctly
865 Check to make sure pkg can be split on / and some debugging code
866 Add 2>dev/null to emerge call in _get_packages_to_emerge()
867 SimpleXMLParser handles True/False/None correctly now
868 Comment out above fix
869 Add partitioning wait-for-device-to-exist code to mount_local_partitions
870
871 28 Jul 2005; Scott Myron <samyron@gentoo.org>
872 Removed a FIXME in the GLIClientConfiguration that is no
873 longer needed.
874
875 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
876 Default to x86 in ClientConfig
877 Typo in build-a-stage3 code.
878 Remove MAKEDEV call in build-a-stage3 postscript.
879
880 26 Jul 2005; Preston Cody <codeman@gentoo.org>
881 Rewrote init of IP for gli-d. Other GenDialog updates.
882 allow network_type to be None in CConfig.
883
884 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
885 Add _dynamic_stage3 option to IP.
886 Add check for that option to dynamic stage3 code in ArchTemplate.
887 Fix code to determine default route in get_eth_info() in GLIUtility.
888 Fix serialization of dns-servers in ClientConfig.
889
890 24 Jul 2005; Preston Cody <codeman@gentoo.org>
891 changed default values of cron/logger in IP.
892 moved GenDialog IP init out to the individual files. gli-dialog's version
893 will change quite a bit.
894
895 22 Jul 2005; Preston Cody <codeman@gentoo.org>
896 added ppcArchTemplate. blank now. working on yaboot.
897 modified ArchTemplate for amd64 and ppc custom kernels.
898 skeleton implementation of _configure_yaboot.
899 small fixes to other templates.
900
901 21 Jul 2005; Preston Cody <codeman@gentoo.org>
902 GenDialog updates. changed comment in IP.
903
904 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
905 src/GLIInstallProfile.py:
906 Fix codeman's screwup of changing the service seperator to ',' in the parser
907 without changing it in the serialization code! Also document this in a
908 comment so you find it easier. Everybody needs to make sure they update
909 their install profiles!
910
911 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
912 src/GLIArchitectureTemplate.py:
913 Fix casting of list to string and concat of None with string, as well as
914 commented prototype of checking that mounting actually worked (found a case
915 where mount can return success, but the mount won't be done).
916
917 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
918 src/templates/x86ArchitectureTemplate.py:
919 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
920 checking for the device, and sleeping 1 second each time.
921
922 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
923 src/templates/x86ArchitectureTemplate.py:
924 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
925 bootloader works again. Also rename _install_{grub,lilo} to
926 _configure_{grub,lilo} since they don't install the loaders anymore
927 themselves.
928
929 7 Jul 2005; Preston Cody <codeman@gentoo.org>
930 fix global USE flags to not include the arch types at the end.
931 updates to GenDialog and gli-d.
932
933 6 Jul 2005; Preston Cody <codeman@gentoo.org>
934 fixing bootloader code for no initrd and initrd->initramfs naming change.
935
936 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
937 Proper comments and parameters to GLIException in install_mta()
938 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
939 Add strip() to list_mirrors(), list_subarch_from_mirror() and
940 list_tarball_from_mirror() to eliminate blank last item.
941
942 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
943 Added stage3 generation code.
944
945 5 Jul 2005; Preston Cody <codeman@gentoo.org>
946 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
947 Mild changes to GenDialog.
948
949 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
950 Remove separate install step configure_rc_conf() since it's handled by
951 update_config_files()
952 Make a copy of newvalues in _edit_config() so quotes aren't added when the
953 function is called twice on the same file.
954
955 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
956 Missing \ in sed in _get_packages_to_emerge()
957 Removed explicit emerging of hotplug and no longer add it to the runlevel.
958 Check in _quickpkg_deps() to ignore blank package names returned from
959 _get_packages_to_emerge()
960
961 28 Jun 2005; Preston Cody <codeman@gentoo.org>
962 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
963 in the dialog.py gauge code.
964
965 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
966 Add code to update_config_files() to go through etc_files and update stuff.
967 Check to see that _etc_files['make.conf'] exists in get_make_conf()
968 Only use float() in partition xml parsing code if type == "free"
969
970 28 Jun 2005; Preston Cody <codeman@gentoo.org>
971 finished almost all internationalization of GenDialog.
972 attempt at fixing rc.conf function. moved 3 generate functions out of
973 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
974 added dialog.py to the fe/dialog directory so it actually gets used.
975
976 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
977 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
978
979 27 Jun 2005; Preston Cody <codeman@gentoo.org>
980 fix extra entry in list_mirrors()
981 beginning internationalization runthrough.
982
983 26 Jun 2005; Preston Cody <codeman@gentoo.org>
984 added dialog.py to /src temporarily until it gets accepted upstream.
985 fix for unused value in form in dialog.py and changed heights.
986 fix GenDialog forms.
987
988 25 Jun 2005; Preston Cody <codeman@gentoo.org>
989 Changed hostname/domainname for new baselayout.
990 Changed _add_to_runlevel errors to logs.
991 Updated TODO list to show status of GenDialog
992 More updates to GenDialog including two checklists that probably won't work.
993 update IP to use comma-separated list instead of space separated for services.
994
995 24 Jun 2005; Preston Cody <codeman@gentoo.org>
996 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
997 GenDialog as it gets closer to completion.
998
999 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1000 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1001 instead of int() in add_partition_device_partition() for minor (closes 96804)
1002
1003 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1004 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1005 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1006 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1007
1008 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1009 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1010 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1011 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1012 Fix undefined variable 'output' issue in spawn().
1013
1014 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1015 More updates to GenDialog and gli-d.
1016
1017 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 Modify list_mirrors() to return a list of mirror URL/name pairs.
1019
1020 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1021 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1022 get subarch.
1023
1024 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1025 Backend partitioning will create disklabel is none exists. Installprofile
1026 defaults to "" now instead of "msdos" for disklabel type. Fix for
1027 mount_local_partitions() to remember device along with minor in the
1028 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1029 add else block to log unsupported netmount types to mount_network_shares()
1030
1031 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1032 src/GLIArchitectureTemplate.py:
1033 Refactor kernel_compile common stuff, fix 2.4 build process.
1034 src/fe/cli/clife.py:
1035 Logging system.
1036 src/GLIUtility.py, src/GLIStorageDevice.py:
1037 Add comments about re-writes needed for boxes without sysfs.
1038
1039 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1040 src/GLIArchitectureTemplate.py:
1041 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1042 'make dep' call for custom compile. build_mode support for prepare-only and
1043 none types completed. custom compile function chains shell functions in
1044 spawned script, to allow for catching all errors.
1045
1046 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1047 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1048 and GenDialog. other gendialog updates as well. kernel updates untested.
1049
1050 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1051 src/GLIInstallProfile.py:
1052 Change structure of etc-portage stuff. The serialization was broken before my
1053 last commit, and I am the only person that's ever used it. The new schema is
1054 as follows:
1055 <etc-portage>
1056 <file name="package.mask"/>
1057 <file name="package.unmask">
1058 <entry atom="sys-kernel/openmosix-sources"/>
1059 </file>
1060 <file name="package.use">
1061 <entry atom="sys-libs/db">
1062 -java
1063 </entry>
1064 <entry atom="dev-libs/cyrus-sasl">
1065 -ldap
1066 </entry>
1067 </file>
1068 </etc-portage>
1069
1070
1071 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1072 src/GLIInstallProfile.py:
1073 Add new entry for gli-profile/kernel-build-method item. Add missing
1074 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1075 keys in the same order.
1076
1077 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1078 src/GLIArchitectureTemplate.py:
1079 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1080 was repeatedly appended to make.conf.
1081
1082 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1083 src/GLIArchitectureTemplate.py:
1084 Put some Linux-2.6 specific code under a if statement. Store list of
1085 successfully mounted swap device for using swapoff. Add proper error checking
1086 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1087 'file'. Clean up some redundant code (thanks to pychecker).'
1088
1089 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1090 Fix typos: get_extended() instead of get_extended_partition(). Added
1091 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1092 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1093
1094 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1095 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1096 in add_network_interface.
1097
1098 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1099 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1100 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1101 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1102 prepare_chroot.
1103
1104 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1105 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1106 +src/fe/installer-gtk:
1107 Add new automated CLI frontend. Add scripts that are the intended means to
1108 use each frontend.
1109
1110 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1111 src/GLIClientController.py:
1112 Add null type to network config, for cases where the interface is already up
1113 and should not be touched (netboot for example).
1114
1115 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1116 src/GLIArchitectureTemplate.py:
1117 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1118 string!. Try to use binary packages if available by default.
1119
1120 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1121 src/GLIArchitectureTemplate.py:
1122 More error checking for _add_to_runlevel, to ensure that the init script
1123 actually exists before we try to add it. set_services phase must take place
1124 after the package installation, otherwise the init scripts might not exist.
1125 Find the correct init script for the cron and logging daemons, and add that
1126 instead of the package atom.
1127
1128 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1129 src/GLIArchitectureTemplate.py:
1130 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1131 usage of 'file' to 'contents' for the variable name, as it shadows
1132 __builtin__.file.
1133
1134 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1135 src/GLIArchitectureTemplate.py:
1136 Add MTA install code, and include MTA install phase. Ensure
1137 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1138 for 'none' kernel config for build_kernel phase. Put kernel_script in
1139 /var/tmp instead of /root for build_kernel phase.
1140
1141 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1142 Rename mta variables to match syslog/cron variables.
1143
1144 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1145 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1146 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1147 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1148 src/templates/.cvsignore, src/tests/.cvsignore:
1149 Refactor partition formatting again to include error checking. Allow 'none'
1150 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1151
1152 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1153 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1154 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1155 only have a single spawn call.
1156
1157 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1158 refixed samyron's fix of set_architecture_template.
1159
1160 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1162 be executable.
1163
1164 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1165 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1166 error checking when you call set_architecture_template.
1167
1168 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1169 moved the mkfsopts input to the partition options menu instead of the during
1170 the creation process. updated GenDialog to say it supports reiserfs v3.
1171
1172 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1173 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1174 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1175 Add support for other partition types to dialogfe.
1176 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1177 avoid integer overflows and wraparounds.
1178
1179 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1180 Removed start/end from XML output and added mkfsopts to partitioning info.
1181 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1182 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1183 in GLIClientConfiguration. Change from .1 and .9 to constants for
1184 partitioning. Fix free space overwriting bug. Remove a few unused functions
1185 from rewrite. Fix call to get_partition_at()
1186
1187 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1188 Updates to GenDialog and dialogfe.
1189
1190 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1191 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1192
1193 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1194 more GenDialog updates to partitioning.
1195
1196 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1197 Indenting issue in GLISD/get_ordered_partition_list.
1198 updates to GenDialog partitioning and added default UTC for timezone in IP.
1199
1200 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Added GLISD.get_model()
1202
1203 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1204 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1205 More updates to GenDialog :)
1206
1207 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 Added get_interface_realname() function.
1209
1210 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1211 Added auto-save of CConfig and copying to new /root after install.
1212 yet even more GenDialog updates.
1213
1214 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1215 removed print statement from GLISD. more updates to GenDialog.
1216
1217 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1218 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1219 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1220 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1221 places in GLIClientConfiguration.
1222
1223 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1224 Fix mount_local_partitions(), configure_fstab(), and
1225 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1226 A few more fixes for templates/x86Archtemplate
1227
1228 27 May 2005; Preston Cody <codeman@gentoo.org>
1229 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1230 a work in progress.
1231
1232 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1234 directly. GLISD can now handle data imported from XML.
1235
1236 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1238 handle blank (no disklabel) disks.
1239
1240 20 May 2005; Preston Cody <codeman@gentoo.org>
1241 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1242 up, documented, and separated out serialization and grouped all sections.
1243
1244 19 May 2005; Preston Cody <codeman@gentoo.org>
1245 Reorganization of ClientConfiguration and gutting of unused functions.
1246 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1247
1248 18 May 2005; Preston Cody <codeman@gentoo.org>
1249 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1250
1251 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1252 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1253 partitioning. CC serializes install profile to disk and prepare_chroot()
1254 copies it into /mnt/gentoo/root
1255
1256 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Moved URI parsing into new function parse_uri()
1258
1259 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 Added XMLParser module.
1261
1262 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1263 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1264 Minor fix to is_uri() regex to allow hyphens in hostname.
1265
1266 12 May 2005; Preston Cody <codeman@gentoo.org>
1267 Updated finishing_cleanup for new unmounting method from agaffney.
1268
1269 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 Fix GLILogger to use correct time format string. Fix _edit_config() to
1271 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1272 unicode support to is_realstring().
1273
1274 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1275 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1276 return value instead of non-zero. Add code to output a traceback to the
1277 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1278 instead of --nocolor.
1279
1280 10 May 2005; Preston Cody <codeman@gentoo.org>
1281 Added GLIGenDialog.py to make a generic class for the dialog functions that
1282 can be used by both dialogfe and the netfe/be. updated both for new filename.
1283 date changes. 2004->2005.
1284
1285 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 Removed 'quiet=True' from spawn() calls
1287
1288 10 May 2005; Preston Cody <codeman@gentoo.org>
1289 Updated GLIUtility with patches from chotchki. Also added documentation
1290
1291 9 May 2005; Preston Cody <codeman@gentoo.org>
1292 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1293 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1294 from bug #89683, mostly touchups.
1295
1296 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1297 GLIStorageDevice cleanup patch from bug #91761
1298
1299 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1300 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1301 _edit_config(). Error logging casts 'error' to str
1302
1303 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Exceptions received in CC are logged before being passed to the FE. Added
1305 code to CC to handle exceptions *not* thrown by the installer itself.
1306
1307 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1308 get_max_mb_for_resize() returns -1 if not self.resizeable
1309
1310 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 More dirty rsync hacks :-/
1312
1313 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1314 Patches from chotchki (bug #90325) to improve CC networking. untested.
1315
1316 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1317 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1318 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1319 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1320 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1321 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1322 _get_packages_to_emerge()
1323
1324 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1325 Added group-adding code to set_users in ArchTemplate
1326
1327 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Added post-install script code
1329
1330 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1331 Fixed encapsulation issues in GLIClientController (bug #90141)
1332
1333 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Update resizing code in GLIStorageDevice
1335
1336 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1337 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1338
1339 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1340 Reverted change to ArchTemplate and added support for commented line in old
1341 code.
1342
1343 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1344 Changed _edit_config() to modify value in-place instead of commenting out and
1345 adding the new value to the end of the file.
1346
1347 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1348 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1349 Also updated TODO list.
1350
1351 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1352 Use blackace's one-liner to add comments for all function for use with
1353 pythondoc.
1354
1355 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1356 Moved 'end >= device_sectors' check out of loop to check for next partition's
1357 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1358 Partitioning code now tracks start/end of extended for placing logicals. End
1359 point of logical is now adjusted along with start.
1360
1361 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1363 the way of partitioning from a blank disk. Add int() around access to minor
1364 key in partition information due to new partition code leaving them as float.
1365
1366 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1367 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1368
1369 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1370 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1371
1372 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1373 Added support for DHCP options and MAC addresses in the InstallProfile.
1374
1375 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1376 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1377 sed to properly strip out junk.
1378
1379 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1380 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1381 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1382
1383 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1384 Fixed indent problem in GLICController
1385
1386 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 Check for disklabel type "loop" and use the device name without a minor.
1388
1389 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Remove /tmp/compile_output.log and /var/log/install.log when install is
1391 complete. Added code to (hopefully) keep 2nd thread running after install.
1392 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1393 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1394 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1395
1396 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1397 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1398 when unpacking tarball.
1399
1400 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1401 rewrote filesystem_tools. looks like it works so ripping out all the old
1402 filesystem_tools code.
1403
1404 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1405 Changed the print statements to logging in the partitioning BE code.
1406 the logger may need to be imported to the x86archtemplate. unknown yet.
1407 Added the finishing_cleanup function.
1408 added a fix to the logger from BenUrban
1409
1410 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1411 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1412 URIs. The blank uri check has been commented out.
1413 ripped out error checking of set_services. this is done by _add_to_runlevel.
1414
1415 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1416 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1417
1418 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1419 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1420 the install profile if available. Commented out spawn() debugging prints
1421
1422 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1423 small changes to setup_network_post. moved adding to runlevel of net.x to
1424 after the device gets symlinked. added domainname runlevel command.
1425
1426 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1427 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1428 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1429 spawn() call in livecd-kernel code to pass environment variables.
1430 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1431 the install profile if available.
1432
1433 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1435 to handle installing the livecd kernel into the new system.
1436
1437 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1438 should emerge hotplug and coldplug before adding them to runlevel.
1439
1440 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1441 took chroot out of grub_install command.
1442
1443 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1444 Changed chroot wrapper code in spawn() to write the wrapper the python way
1445 instead of the bash way to avoid quote conflicts. Added
1446 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1447 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1448 as it breaks the piping.
1449
1450 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1451 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1452
1453 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1454 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1455 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1456 GLIInstallProfile.
1457
1458 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1459 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1460 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1461 into /mnt/gentoo in prepare_chroot()
1462
1463 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1464 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1465 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1466 to start/end sectors
1467
1468 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1469 Add 2>&1 to cmd in spawn()
1470
1471 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1472 Modified GLIUtility.exitsuccess() to work with return value from
1473 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1474 creates wrapper script for commands run inside chroot so multiple commands
1475 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1476 for the generated script from spawn()
1477
1478 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1479 Removed default values for stage tarball URI and portage tree URI from
1480 InstallProfile. These should be set by the FEs. also added services step to
1481 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1482 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1483
1484 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1485 Small fix for setting the default gateway. Also added feature to dialogfe.
1486
1487 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1488 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1489
1490 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1491 Fixed a bunch of true -> True typos. lots of em
1492 only write new resolv.conf if there are dns servers listed.
1493
1494 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1495 Commented out 'display_on_tty8=True' in start_portmap()
1496
1497 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1498 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1499
1500 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1502 lang parameter to __init__()
1503
1504 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1505 updates to TODO list.
1506
1507 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1508 Initial code for quickpkg GRP support. Fix loop to grab packages from
1509 'emerge -p blah'
1510
1511 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1512 check for dhcp in the network stuff and emerge it if it is.
1513 added quickpkg to TODO list
1514
1515 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1516 Changed the raising of 'warning' exceptions to a simple log of the error
1517 so that the installer can continue.
1518
1519 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1520 Some big changes. First, changed most output to display_on_tty8.
1521 Second, added log lines to all templates. Some smaller fixes such as typos.
1522 Also did some cleanups of old commented lines.
1523
1524 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1525 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1526 Undo change with fix. Escaping fix in GLIStorageDevice.py
1527
1528 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1529 more updates to TODO list. hopefully we'll soon start removing items instead
1530 of adding them.
1531
1532 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1533 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1534
1535 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1536 updated TODO list. (again)
1537
1538 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1539 changed output of portmap start to display_on_tty8.
1540 fixed bootloader for udev and multiple kernels
1541 fixed custom kernel config (again)
1542
1543 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1544 changed default value of CC._enable_ssh to True because this is smart.
1545 added code to allow custom kernel .config. may be unstable and break. sorry.
1546
1547 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1548 partition() now waits until after it checks for partition flags before delete
1549 the partitions :P
1550
1551 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1552 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1553 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1554 blank.
1555
1556 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1557 Various fixes related to the add_users function. Still not yet finished.
1558 Added things to the TODO list. Lets start using that!
1559
1560 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1561 Added code to x86Template to format newly created partitions. Also added
1562 some error checking code. GLIStorageDevice passes 'minor' with data to
1563 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1564 mounting code.
1565
1566 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1567 Took out unnecessary setting of random livecd root password. the cd already
1568 sets it randomly.
1569
1570 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1571 Took out an unneeded step from CC's run()
1572
1573 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1574 Attempt at detecting and adding windows partitions to lilo.
1575
1576 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1577 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1578 partition. fixed misc exit_status => exitstatus typo.
1579
1580 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1581 Added basic code for resizing filesystems with pyparted. Fixed code for
1582 resizing ntfs and ext2/3.
1583
1584 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1585 Fixed partition() in x86Template so that it scans through logicals and deletes
1586 before deleting containing extended partition. Also clears partition table to
1587 be safe before third pass.
1588
1589 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1590 Added mount_network_shares. not able to test it from this computer.
1591 will test when i get back to school.
1592 also added start_portmap to the client_controller as an always-do.
1593 agaffney says this is needed for NFS mounts to work.
1594
1595 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1596 Partial rewrite of partitioning code in x86Template. No longer shells out to
1597 parted to perform actions, now uses all pyparted calls. Code "works" in a
1598 test, but still needs lots of TLC. Also modified tests/install.py to work
1599 with x86Template and GLIClientConfiguration.
1600
1601 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1602 Initial move of partitioning code from ArchTemplate to x86Template.
1603
1604 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1605 Added grp_install and services to InstallProfile. forgot about the set_root_password
1606
1607 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1608 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1609 Test Install ran very well (skipping partitioning).
1610
1611 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1612 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1613 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1614 some may still have eluded me.
1615
1616 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1617 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1618 Just finished mount_local_partitions in GLIArchitectureTemplate
1619
1620 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1621 Added get_num_sectors() to GLIStorageDevice.
1622
1623 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1624 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1625 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1626 from GLIInstallProfile.
1627
1628 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1629 GLIStorageDevice returns "unknown" instead of "" for get_type()
1630
1631 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1632 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1633 actually work. Commented out resizability checking code for speed.
1634
1635 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1636 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1637 GLIStorageDevice at the suggestion of plors
1638
1639 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1640 Added a function to GLIUtility to pull a value from a make.conf-style config
1641 file. Minor type fix to GLIInstallProfile.py
1642
1643 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1644 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1645 network mounts from partition data structure in GLIInstallProfile
1646
1647 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1648 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1649 can be resized.
1650
1651 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1652 Added some of the final functions to GLIInstallTemplate.
1653 Yes this project is still active despite rare use of the Changelog!
1654
1655 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1656 Added the GLIPartitionTools.py file. This is a temporary insertion of
1657 partitioning tools that will eventually go into their own package.
1658
1659 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1660 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1661 for the program). Added __init__(install_profile, client_configuration) to
1662 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1663 to avoid constantly passing stuff every time we call a method.
1664
1665 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1666
1667 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1668 files without messing up all the other stuff in them. This will be used for making
1669 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1670
1671 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1672
1673 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1674 have a few basic things. I added two private methods. One is _depends(). This
1675 will be used for dependency checking (ie. unpacking a tarball requires that
1676 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1677 same syntax as os.system(), however, instead of being run in the liveCD
1678 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1679 isolated the code. Hope to work more this week to get this class formed...
1680
1681 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1682
1683 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1684 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1685 to allow for easier modification (mutable, rather than immutable objects). Updated
1686 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1687 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1688 Added initial unit test code.
1689
1690 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1691
1692 Added initial changelog. Setting up the basic structure of the CVS repository
1693 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1694 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20