/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1340 - (show annotations) (download)
Sun Mar 5 04:25:04 2006 UTC (8 years, 6 months ago) by agaffney
File size: 70866 byte(s)
  src/templates/x86ArchitectureTemplate.py:
  fix checks for changed partitions so they will actually get deleted

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.611 2006/03/05 04:25:04 agaffney Exp $
5
6 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIPortage.py:
8 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
9 src/templates/x86ArchitectureTemplate.py:
10 fix checks for changed partitions so they will actually get deleted
11
12 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
13 src/GLIClientController.py:
14 slightly better error handling for pre-install failures
15
16 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
17 src/templates/x86ArchitectureTemplate.py:
18 proper return code checking for ext2/3 resizing
19
20 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
21 src/GLIClientController.py:
22 accept 'none' as well as 'null' for network type
23 src/GLIArchitectureTemplate.py:
24 ignore extended partitions in mount_local_partitions()
25 src/templates/x86ArchitectureTemplate.py:
26 use get_ordered_partition_list() instead of keys().sort() for new_part_list
27 check to make sure start sector for primary isn't less than end sector for
28 previous extended
29 src/GLIClientController.py:
30 write dns servers to /etc/resolv.conf
31
32 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
33 src/GLIPortage.py:
34 copy_pkg_to_chroot() uses compile_output.log for command output
35
36 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
37 only keep a 1000 line 'scrollback' buffer for the compile output and log file
38
39 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIPortage.py:
41 add code make GLIPortage.py capable of being run stand-along for dynamic
42 stage3 generation and copying packages in a GRP-ish way
43 grp code fixups
44
45 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
46 src/GLIPortage.py:
47 ignore blank packages passed to get_deps() and emerge()
48
49 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
50 src/GLIUtility.py:
51 add get_chosts() function
52
53 *GLI-0.3 (12 Feb 2006)
54
55 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/templates/x86ArchitectureTemplate.py:
57 pull old start/end sector values from somewhere that actually has them
58 add logic for extended partition to code that makes sure new end sector
59 doesn't overlap start sector of next partitions
60 don't freak out if partition can't be deleted
61
62 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
63 src/GLIPortage.py:
64 run env-update at the end of copy_pkg_to_chroot()
65
66 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/templates/x86ArchitectureTemplate.py:
68 I'm a complete fscking dumbass. I recorded the end sector for partitions that
69 weren't being touched, but I never used it when recreating them...the end was
70 calculated from the size in MB instead :/
71
72 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIArchitectureTemplate.py:
74 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
75 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
76 src/GLIPortage.py:
77 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
78 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
79 'resized' flag
80
81 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
82 src/GLIPortage.py:
83 short circuit and check vdb directly if package begins with '='
84
85 8 Feb 2006; Preston Cody <codeman@gentoo.org>
86 added more packages to extra_packages list in IP
87
88 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
89 src/templates/x86ArchitectureTemplate.py:
90 10 tries to create filesystem instead of 3
91 src/GLIPortage, src/GLIArchitectureTemplate.py:
92 ignore_missing flag for copy_pkg_to_chroot()
93
94 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIPortage.py:
96 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
97
98 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/net/server/gliserv.py:
100 fix handling of 404 for real files
101 src/net/server/GLIServerProfile.py:
102 look for 'hostname' in attributes instead of 'name'
103
104 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
105 src/SimpleXMLParser.py:
106 initial support for 'include' in XML files
107 src/GLIStorageDevice.py:
108 initial support for %
109 src/GLIClientController.py:
110 add debugging statements to pre-install steps
111
112 15 Jan 2006; Preston Cody <codeman@gentoo.org>
113 webgli/configfiles:
114 check for key in etc_files['rc.conf'] to fix key error
115 webgli/timezone: small fix.
116 webgli/extrapackages: list-type fix
117 webgli/services: same
118 glimd: add/edit_client updates.
119
120 12 Jan 2006; Preston Cody <codeman@gentoo.org>
121 added configure.pyhtml to glimd. minor changes
122 to top and add_client. fixed up showargs.
123 added execute.pyhtml
124 changed register clients line in gliserv for name->hostname.
125 updated TODO.
126
127 10 Jan 2006; Preston Cody <codeman@gentoo.org>
128 src/net/server/*:
129 added add/del/edit client/profile.pythml for glimd.
130 updated templates, showclients, and gliserv.
131
132 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
133 src/net/server/*:
134 stupid threading module...
135
136 8 Jan 2006; Preston Cody <codeman@gentoo.org>
137 AT: rc.conf -> conf.d/clock
138
139 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
140 src/GLIPortage.py:
141 show 'Calculating dependencies for ...' in subprogress bar at beginning of
142 emerge()
143 src/GLIArchitectureTemplate.py:
144 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
145 in the chroot
146 remove _quickpkg_deps() and _portage_best_{visible,version}()
147 src/GLIUtility.py:
148 fail immediately in validate_uri() if provided URI can't be parsed
149 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
150 debug code in spawn()
151 use lower-level os.read() instead of file.read() because python sucks
152 src/templates/x86ArchitectureTemplate.py:
153 basic subprogress reporting for partitioning
154 total_steps was 1 too high
155
156 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIUtility.py:
158 move parse_vdb_contents() to GLIPortage
159 src/GLIPortage.py:
160 remove all symlink fixups
161 ignore 'dir' entries in CONTENTS
162 call tar with -p
163
164 5 Jan 2006; Preston Cody <codeman@gentoo.org>
165 AT: bootsplash is now gensplash
166 gliserv: add advanced_mode to shared_info
167 webgli: Added advanced mode. mostly just disables a few screens.
168
169 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIPortage.py:
171 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
172 added emerge()
173 update sub-progress after each package is emerged
174 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
175 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
176 remove link if it exists before moving content into place
177 src/GLIArchitectureTemplate.py:
178 install_packages() now calls emerge() in GLIPortage
179 change all calls to self._emerge() to self._portage.emerge()
180 comment out all emerge status checking...using exceptions now
181 call copy_pkg_to_chroot() directly for livecd-kernel
182
183 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIArchitectureTemplate.py:
185 remove add_pkg_to_world() and copy_pkg_to_chroot()
186 copy installer.log to installer.log.failed on install failure
187 src/GLIUtility.py:
188 added get_keymaps()
189 spawn() takes any False argument for chroot instead of just None
190 src/GLIPortage.py:
191 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
192 change copy_pkg_to_chroot() to work properly with use_root=False
193 figure PORTAGE_TMPDIR properly
194
195 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
196 src/net/server/html/*:
197 converted showclients, load/saveprofile
198
199 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
200 src/GLIPortage.py:
201 exclude packages already in chroot vdb from binary deplist
202 chroot to use best_version for chroot's vdb
203 src/runtimedeps.py:
204 accept ROOT via commandline instead of env
205
206 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
207 src/runtimedeps.py:
208 remove passing of ROOT
209 src/GLIPortage.py:
210 modify get_deps() to get deptree for each package and merge into final list
211 remove depgraph class
212 add debugging code to get_deps()
213 src/GLIArchitectureTemplate.py:
214 combine code for GRP/compile in install_packages() into one block
215 debugging code in install_packages()
216
217 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
218 src/runtimedeps.py:
219 initial commit
220 src/GLIPortage.py:
221 use separate script for GRP deps
222 remove calls to portage module
223
224 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
225 src/GLIPortage.py:
226 initial commit
227 move some of portage function from GLIAT
228 flipped around a few function args
229 src/GLIArchitectureTemplate.py:
230 revamp install_packages() for new GLIPortage
231
232 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
233 src/GLIArchitectureTemplate.py:
234 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
235
236 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
237 src/net/server/gliserv.py:
238 wrap generated code in a class to isolate it a bit better
239 302 redirects work
240 don't use cgi.escape() for <% %>
241 src/net/server/html/webgli/*:
242 load/save profile
243 src/GLIUtility.py:
244 change /sbin/lspci to just lspci
245
246 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
247 src/GLIClientController.py:
248 change ordering of statements in CC run() while loop to not go past the end
249 of the array
250 src/GLIArchitectureTemplate.py:
251 removed redundant bind mounts
252
253 18 Dec 2005; Preston Cody <codeman@gentoo.org>
254 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
255 added a diagram by blackace from last night.
256 added the glossary in RTF format.
257
258 17 Dec 2005; Preston Cody <codeman@gentoo.org>
259 x86AT: separated out emerge/configure from running of bootloader
260 added MBR drive support to lilo.
261 these changes will likely not work.
262 AT: added setup_and_run_bootloader step.
263
264 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
265 src/net/server/gliserv.py:
266 call generated code in a function
267 src/net/server/html/webgli/*:
268 include top/bottom
269 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
270 src/GLIClientCongifuration.py:
271 install mode magic
272
273 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
274 src/GLIClientController.py:
275 use GLIException when there's an import problem
276 added debug code to show install_steps
277 src/templates/amd64ArchitectureTemplate.py:
278 add . to import path
279 proper path this time: ../../templates
280 src/GLIArchitectureTemplate.py:
281 add _portage_best_version() function
282
283 11 Dec 2005; Preston Cody <codeman@gentoo.org>
284 added initial glossary and gimli diagram to the docs directory.
285 modify gli-dialog to allow editing of the install_profile after loading XML.
286
287 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
288 src/net/server/html/webgli/:
289 converted globaluse, localuse, networkmounts, portagetree, and stageselection
290 moved saveclientconfig stuff into clientconfig
291 moved saveconfigfiles into config files
292 converted etc_portage and makedotconf
293 converted bootloader and kernel
294 convert daemons, extrapackages, networking, review, services, timezone, users
295 src/net/server/gliserv.py:
296 proper 404 handling for .pyhtml extension
297 HTML escape <% %> stuff
298 work around python's sucky regexes
299 src/GLIInstallProfile.py:
300 allow set_{rsync,ftp,http}_proxy() to accept empty values
301
302 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
303 src/net/server/gliserv.py:
304 initial commit of Legolas templating engine
305 302 redirects
306 src/net/server/html/index.html, src/net/server/webgli_template.html:
307 minor changes for new code
308 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
309 initial commit of the conversion from the monolithic WebGLIHandler.py to the
310 one file per path Legolas goodness
311 partitioning[2-4] done
312
313 5 Dec 2005; Preston Cody <codeman@gentoo.org>
314 webgli: dhcp options in CC and post-install.
315 updated comparison chart.
316 webgli: etc/portage/* and distcc support added. not too-well tested.
317
318 4 Dec 2005; Preston Cody <codeman@gentoo.org>
319 webgli_template.html: valign=top on left side.
320 webgli: fix bootloader boot_device. now working.
321 webgli: CC proxy done. post-install proxy in progress.
322
323 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
324 src/net/server/webgli_template.html:
325 increase padding for content cell to 7px and add colspan=2
326
327 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
328 webgli: added graphic bar on top
329 webgli: added hover effects on the links on the left
330 webgli: re-rendered header_bg.png to stretch without artifacts
331
332 3 Dec 2005; Preston Cody <codeman@gentoo.org>
333 webgli: make.conf disabling fixes for dynamic_stage3
334 fixed portage snapshot browse popup
335 all changes tested.
336 webgli: add debug mode to CC screen. the screen still needs lots of work.
337
338 1 Dec 2005; Preston Cody <codeman@gentoo.org>
339 added debug mode question to gli-dialog
340 added CC proxies to CC networking for gli-dialog
341 webgli: fixed skip CC networking if connection active
342 webgli: portage snapshot defaults to CD
343 webgli: bootloader mbr drive selection
344 webgli: USE flags unselectable if dynamic_stage3
345 webgli: manual extra packages and save button.
346
347 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
348 src/GLIUtility.py:
349 change ping count to 2
350 docs/comparison.html
351 initial commit
352
353 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
354 src/templates/x86ArchitectureTemplate.py:
355 fix map() issue with grub code
356 replace kernel_names and initrd_names loops with one-liners
357
358 27 Nov 2005; Preston Cody <codeman@gentoo.org>
359 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
360 initial gli-dialog support for recommended partitioning layout and clear.
361 failure cleanup now an option for gli-dialog.
362 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
363 added comparison list and updated TODO!
364
365 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
366 src/GLIArchitectureTemplate.py:
367 fix to stage1() debug code
368 fix to stage2() debug code
369
370 26 Nov 2005; Preston Cody <codeman@gentoo.org>
371 some more bootloader code fixes. forgot boot_device != mbr_device.
372
373 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
374 src/GLIStorageDevice.py:
375 fix to unallocated space merging when last one is after part 4
376
377 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
378 src/GLIArchitectureTemplate.py:
379 small fix to debugging code in copy_pkg_to_chroot()
380
381 23 Nov 2005; Preston Cody <codeman@gentoo.org>
382 more bugfixes with bootloader code
383 gli-dialog side appears to work
384
385 21 Nov 2005; Preston Cody <codeman@gentoo.org>
386 initial adding of boot_device to backend.
387 initial boot_device support added to gli-dialog.
388 some fixes of my poor coding
389
390 20 Nov 2005; Preston Cody <codeman@gentoo.org>
391 converted gli-dialog to use the install_package_list.
392 gtkfe has already been converted by AllanonJL
393 new way working in gli-dialog now and added to webgli.
394 added set/get_boot_device() to IP
395
396 19 Nov 2005; Preston Cody <codeman@gentoo.org>
397 get_install_package_list added to InstallProfile. This can be used by the FEs
398
399 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/templates/x86ArchitectureTemplate.py:
401 call ls with '-1 --color=no'
402
403 16 Nov 2005; Preston Cody <codeman@gentoo.org>
404 added warning (#9) to GRP ppl about stage3 tarballs
405
406 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
407 src/GLIArchitectureTemplate.py:
408 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
409 confused
410
411 13 Nov 2005; Preston Cody <codeman@gentoo.org>
412 removed protocols from rc.conf screens
413 finished initial rc.conf and make.conf in webgli
414
415 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
416 src/net/server/gliserv.py:
417 add -h option to usage()
418 show time and request URI in debug mode
419 show client IP in debug mode
420 just use IP instead of trying to do a reverse lookup
421
422 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
423 src/net/server/gliserv.py:
424 'classier' 401 message
425 proper commandline parsing
426 help via -h
427 user/pass can be specificed via commandline option
428
429 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
430 src/net/server/gliserv.py:
431 basic HTTP auth
432
433 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
434 src/net/server/gliserv.py:
435 dynamic module reloading (yipee!)
436 send 'Last-Modified' header for real files
437 respond to HEAD with just headers
438 src/net/server/handlers/WebGLIHandler.py:
439 icons for drives
440
441 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
442 src/net/server/handlers/WebGLIHandler.py:
443 initial 'pretty' partition table display support
444 clicking partition in 'pretty' display works instead of radio buttons
445 radio buttons and pretty display work together
446 META redirect instead of javascript
447 pretty display stretches across entire screen
448 'Recommended layout' and 'Clear drive' functions
449 properly catch exceptions from do_recommended()
450 src/GLIArchitectureTemplate.py:
451 replace preinst, copy, postinst, rm steps with qmerge
452 whoops...that shouldn't have been commented out
453 create image_dir with -p in copy_pkg_to_chroot()
454 more generic of symlink crappiness
455 new copy_pkg_to_chroot() actually works now
456
457 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
458 src/GLIStorageDevice.py:
459 initial generic disk support
460 fixes for add_partition() code
461 src/net/server/handlers/WebGLIHandler.py:
462 added support for creating generic disks
463 add new partition working
464 save and delete partitions
465
466 6 Nov 2005; Preston Cody <codeman@gentoo.org>
467 webgli: Partitioning making progress.
468
469 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
470 src/GLIArchitectureTemplate.py:
471 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
472 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
473 dir) and works around /etc/gconf symlink problem
474
475 5 Nov 2005; Preston Cody <codeman@gentoo.org>
476 webgli: lots of updates. preliminary partitioning. extra packages works.
477
478 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
479 src/net/server/gliserv.py:
480 httpd now supports HTTPS and falls back to HTTP if not available
481 make fallback actually work
482 src/net/server/SecureXMLRPCServer.py:
483 SecureSocketServer is now threaded
484
485 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
486 src/net/client/gliclient.py:
487 try to use HTTPS for XMLRPC first and fallback to HTTP
488 pretend mode
489 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
490 HTTPS XMLRPC goodness from samyron
491 pass name of certificate
492
493 31 Oct 2005; Preston Cody <codeman@gentoo.org>
494 wegli: daemons and services screens done.
495
496 30 Oct 2005; Preston Cody <codeman@gentoo.org>
497 webgli: networking and users screens
498 added return_redirect to handler.py
499 loading and saving install/client profiles works for webgli now
500 Review also done
501
502 *GLI-0.2 (27 Oct 2005)
503
504 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
505 src/templates/x86ArchitectureTemplate.py:
506 properly check for bootloader emerge exist status with exitsuccess()
507 log output of grub install command
508 add --batch --no-floppy to grub command
509 grubinstallstring only gets logged if debug is on
510 src/GLIUtility.py:
511 update progress bar to 100% when process finishes
512
513 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
514 src/GLIClientController.py:
515 added debugging code for the interaction between the 2 threads via Event()
516 src/GLIUtility.py:
517 doubled the buffer size in spawn()
518 bump buffer size up to 16384
519 only report progress in 5% increments
520 src/GLIArchitectureTemplate.py:
521 kernelpkgs.txt support code
522 above disabled because it sucks
523 added add_pkg_to_world()
524
525 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/GLIArchitectureTemplate.py:
527 use tar | tar to copy files in copy_pkg_to_chroot()
528 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
529
530 23 Oct 2005; Preston Cody <codeman@gentoo.org>
531 DEBUGGING ADDED TO AT. verbose field added to CConfig.
532
533 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
534 src/net/server/gliserv.py:
535 / maps to index.html
536 look for actual files in html/
537 src/net/html:
538 new template
539 src/GLIUtility.py:
540 added parse_vdb_contents()
541 src/GLIArchitectureTemplate.py:
542 added copy_pkg_to_chroot()
543 added debug code to dynamic-stage3
544 switch dynamic-stage3 to new method
545 lots of bug fixes from adding debug code
546
547 22 Oct 2005; Preston Cody <codeman@gentoo.org>
548 webgli initial bootloader support + changed make.conf.
549 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
550
551 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
552 src/GLIUtility.py:
553 horrible tangled mess of code that is tarball unpacking subprogress display
554 add unpack progress to portage snapshot
555 use read() instead of readlines() in spawn()
556 only update progress bar for whole percents
557
558 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
559 src/templates/x86ArchitectureTemplate.py:
560 change call to 'grub' to use GLIUtility.exitsuccess()
561 add definition of 'build_mode' in _configure_lilo()
562 src/misc/updategtkfe, src/misc/updateglid:
563 fix so subshell is called in root shell
564
565 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
566 src/net/server/handlers/WebGLIHandler.py:
567 stage screen launches URI browser in sized window with various properties set
568
569 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
570 src/misc/updategtkfe:
571 updated to actually work
572 remove previous snapshot and extracted dir before downloading
573 src/misc/updateglid:
574 updated to actually work
575 src/templates/x86ArchitectureTemplate.py:
576 fixed bug where grub code was looking for 'root+root+file_name2'
577
578 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/net/server/handlers/WebGLIHandler.py:
580 URI browser
581 added mirror selection
582 src/GLIUtility.py:
583 ls via ssh strips off ending *
584
585 16 Oct 2005; Preston Cody <codeman@gentoo.org>
586 more updates to webgli. stage selection.
587
588 11 Oct 2005; Preston Cody <codeman@gentoo.org>
589 updated webgli with preliminary Network Mounts support.
590
591 9 Oct 2005; Preston Cody <codeman@gentoo.org>
592 GenDialog: string formatting and yes/no label fixes.
593 added WebGLI template for gliserv.py
594 added WebGLIHandler as well as a definition for it in gliserv.py
595 updates to the webgli files even though they won't be there for long.
596 Utility: remove exception for non-existant grppkgs.txt until the new livecd
597 goes public.
598
599 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
600 src/net/server/gliserv.py:
601 override dict to not be so anal
602 main server now loads separate module to handle requests
603 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
604 split out profile URLs into separate handler function
605 move handlers into subdirectory
606 add Welcome and Clients handlers
607
608 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
609 src/GLIUtility.py:
610 raise exception if password prompt received twice
611
612 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
613 src/GLIUtility.py:
614 removed rot13ify()
615
616 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
617 src/net/server/gliserv.py:
618 allow for param to be passed multiple times in GET
619 no XMLRPC functions return None
620 modify POST request parsing to only create a list if needed
621 fix GET request parsing so the list creation for multiple values works
622 src/net/client/gliclient.py:
623 various typo and type mismatch fixes
624 exit after exception
625
626 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
627 src/net/client/gliclient.py:
628 initial commit
629 pass MAC to XMLRPC functions
630 src/net/server/GLIServerProfile.py:
631 rename GLIClientsProfiles to GLIServerProfile
632
633 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/net/server/gliserv.py:
635 now handles POST requests
636 move majority of request handling code to common_handler() to reduce code
637 duplication
638 profile loading
639 client reg via XMLRPC goes into SharedInfo()
640 /showclients redesign
641 template fixes
642 allow handler functions to add/change headers
643 save profile
644
645 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
646 src/net/server/GLIClientsProfiles.py:
647 initial commit
648 src/net/server/template.html:
649 initial commit
650 src/net/server/gliserv.py:
651 add template mojo
652
653 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
654 src/net/server/gliserv.py:
655 XMLRPC mojo
656
657 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
658 src/GLIArchitectureTemplate.py:
659 add code in _edit_config() to comment line where variable is defined
660 previously
661 insert new line under previous definition of variable if it exists
662 small _edit_config() cleanup
663 src/GLIStorageDevice.py:
664 add clear_partitions() function
665 new sizes for recommended partition layout
666 automatically calculate swap size for recommended layout
667
668 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
669 src/templates/x86ArchitectureTemplate.py:
670 fat16 mojo
671
672 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
673 src/GLIStorageDevice.py:
674 prevent do_recommended() from being run twice
675 rewrite do_recommended() to be more robust
676 src/GLIArchitectureTemplate.py:
677 rework _edit_config() to not write duplicate entries
678
679 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
680 src/GLIStorageDevice.py:
681 added do_recommended() function to automatically created 256M/1G/* layout
682
683 17 Sep 2005; Preston Cody <codeman@gentoo.org>
684 src/gli-dialog.py: added set_distcc to the list
685 GenDialog: added set_distcc. untested.
686 IP: added install_distcc flag.
687 AT: added install_distcc function based on the flag. runs after build_kernel
688 changed AT spawn command for distcc for nodeps.
689
690 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
691 src/GLIUtility.py:
692 add rot13ify() function
693
694 16 Sep 2005; Preston Cody <codeman@gentoo.org>
695 src/GenDialog.py
696 added a sentence of text. unchecking support added.
697
698 15 Sep 2005; Preston Cody <codeman@gentoo.org>
699 src/GLIUtility.py
700 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
701 src/GenDialog.py
702 still working on extra_packages. transformed the list to new format.
703 added GRP indication to list. untested.
704 TODO lists updated.
705 src/fe/dialog/gli-dialog.py
706 spelling mistook.
707
708 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
709 src/GLIUtility.py:
710 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
711
712 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
713 src/GLIUtility.py:
714 add get_directory_listing_from_uri()
715 add http support to above
716 add ftp support to above
717 add scp support to above
718 src/GLIArchitectureTemplate.py:
719 "0" instead of 0 for key of single-element dict passed to _edit_config()
720
721 5 Sep 2005; Preston Cody <codeman@gentoo.org>
722 value_only -> only_value
723
724 3 Sep 2005; Preston Cody <codeman@gentoo.org>
725 gutted out all of etc_portage structure since it is now all handled by
726 etc_files
727
728 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
729 src/GLIArchitectureTemplate.py:
730 install_packages() sends progress update notifications
731 src/templates/x86ArchitectureTemplate.py:
732 increase sleep to 5s between format tries
733 src/GLIClientController.py:
734 pass 'self' to AT instead of 'self._pretend'
735
736 2 Sep 2005; Preston Cody <codeman@gentoo.org>
737 logger -> logger.log in x86AT
738
739 1 Sep 2005; Preston Cody <codeman@gentoo.org>
740 added set_etc_portage to IP. debugging gli-d's support for it.
741
742 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
743 src/templates/x86ArchitectureTemplate.py:
744 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
745
746 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
747 src/GLIArchitectureTemplate.py:
748 add _portage_best_version() function and rework install_packages() to allow
749 for future X of Y tracking
750 Use best_visible instead of best_version
751 tracked down and fixed missing = causing empty install extra packages
752 use = when emerging also
753 quickpkg hokey pokey
754 run _get_packages_to_emerge() again with -pk
755
756 22 Aug 2005; Preston Cody <codeman@gentoo.org>
757 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
758 the end of install_packages.
759 added updateglid to /src/misc
760 updated all core files with new GPL notice and copyright statement.
761
762 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
763 src/GLIUtility.py:
764 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
765 a snapshot in /mnt/cdrom/snapshots/
766 get_snapshot_from_cd() adds file:// at the beginning
767 change calls to extra package special case functions to 'self.blah'
768
769 21 Aug 2005; Preston Cody <codeman@gentoo.org>
770 src/ArchTemplate: changed "voodoo".
771 changed order of portage sync methods. made a fallback to webrsync if
772 normal emerge sync fails.
773 removed get_sources_from_cd because it is obsolete.
774 add special cases to install_packages. remove fatal exception on package
775 install failure b/c the box will still be bootable.
776 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
777 handled in the FEs.
778 src/GenDialog: added a bunch of code for dealing with x11-based packages.
779 awaiting testing.
780
781 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
782 src/GLIStorageDevice.py:
783 global try/except block around fs resizable detection code
784 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
785 install-failed cleanup function
786
787 18 Aug 2005; Preston Cody <codeman@gentoo.org>
788 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
789
790 16 Aug 2005; Preston Cody <codeman@gentoo.org>
791 GLIGenDialog:
792 add drive choices for loaded configs.
793 force snapshot for dynamic_stage3
794 init the snapshoturi input to the cd snapshot if not already selected.
795 if dynamic_stage3, skip the make.conf step.
796 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
797 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
798
799 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
800 src/GLIArchitectureTemplate.py:
801 manually call MAKEDEV in stage3-dynamic code
802 copy /etc/inittab.old to /etc/inittab in chroot
803 src/GLIUtility.py:
804 add beginning of validate_uri() function
805 add file:/// support to validate_uri()
806 single quotes when setting livecd password
807
808 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
809 src/GLIGenDialog.py:
810 change getmountpoint() to get_mountpoint()
811 src/misc/updategtkfe:
812 committed script to automatically download latest snapshot and run gtkfe
813 src/templates/x86ArchitectureTemplate.py:
814 fix _configure_lilo_add_windows() for IP -> GLISD stuff
815 src/GLIArchitectureTemplate.py:
816 give tmp_minor an initial value in mount_local_partitions so that the value
817 remain from the previous drive
818
819 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
820 src/templates/x86ArchitectureTemplate.py:
821 Fix _configure_lilo() for IP using GLISD stuff
822 src/GLIArchitectureTemplate.py:
823 install_cron_daemon() treats "none" specially
824
825 14 Aug 2005; Preston Cody <codeman@gentoo.org>
826 old patch from Steven Mertens to resolve bug #96642
827 numerous asthetic changes to GenDialog, no real functionality changes though.
828 strings renamed for global use if necessary.
829 fix all three parts of bug 102291
830 disable set_etc_portage until fully-written.
831
832 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
833 src/GLIClientController.py:
834 lower-case http/ftp proxy envvars
835
836 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
837 src/GLIClientController.py:
838 log end of pre_install steps to aid in debugging
839 src/templates/x86ArchitectureTemplate.py:
840 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
841
842 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
843 src/GLIArchitectureTemplate.py
844 check to make sure that the device node we're wait for to exist isn't of
845 type 'free'
846
847 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
848 src/GLIGenDialog.py:
849 convert install_packages to list in set_extra_packages()
850 check return code of checklist() call in "Manual" section
851 *actually* fix the first problem
852
853 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
854 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
855 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
856
857 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
858 src/GLIArchitectureTemplate.py:
859 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
860
861 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
862 Add CDATA support to SimpleXMLParser and add utility functions for it.
863
864 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
865 src/GLIArchitectureTemplate.py:
866 Fix case where vixie-cron is specified as a full package atom, as we still
867 don't want to run 'crontab /etc/crontab' for it.
868
869 *GLI-0.1 (3 Aug 2005)
870
871 30 Jul 2005; Preston Cody <codeman@gentoo.org>
872 add scp to list of is_uri() so GenDialog doesn't complain.
873 fixed livecd-kernel bug in bootloader code.
874 fixed gendialog for dynamic_stage3 instead of "networkless"
875 change bootloader to allow for both initrd and initramfs.
876 fix IP for dynamic_stage3.
877 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
878
879 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
880 Added full scp:// URI support to get_uri() in GLIUtility
881 Remove "networkless" from dynamic stage3 if locic.
882 Remove print statement from scp:// code.
883 Change scp code to check for "assword: " instead of "Password:"
884 Fix post-install network code to create net.eth1+ symlink correctly
885 Check to make sure pkg can be split on / and some debugging code
886 Add 2>dev/null to emerge call in _get_packages_to_emerge()
887 SimpleXMLParser handles True/False/None correctly now
888 Comment out above fix
889 Add partitioning wait-for-device-to-exist code to mount_local_partitions
890
891 28 Jul 2005; Scott Myron <samyron@gentoo.org>
892 Removed a FIXME in the GLIClientConfiguration that is no
893 longer needed.
894
895 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
896 Default to x86 in ClientConfig
897 Typo in build-a-stage3 code.
898 Remove MAKEDEV call in build-a-stage3 postscript.
899
900 26 Jul 2005; Preston Cody <codeman@gentoo.org>
901 Rewrote init of IP for gli-d. Other GenDialog updates.
902 allow network_type to be None in CConfig.
903
904 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
905 Add _dynamic_stage3 option to IP.
906 Add check for that option to dynamic stage3 code in ArchTemplate.
907 Fix code to determine default route in get_eth_info() in GLIUtility.
908 Fix serialization of dns-servers in ClientConfig.
909
910 24 Jul 2005; Preston Cody <codeman@gentoo.org>
911 changed default values of cron/logger in IP.
912 moved GenDialog IP init out to the individual files. gli-dialog's version
913 will change quite a bit.
914
915 22 Jul 2005; Preston Cody <codeman@gentoo.org>
916 added ppcArchTemplate. blank now. working on yaboot.
917 modified ArchTemplate for amd64 and ppc custom kernels.
918 skeleton implementation of _configure_yaboot.
919 small fixes to other templates.
920
921 21 Jul 2005; Preston Cody <codeman@gentoo.org>
922 GenDialog updates. changed comment in IP.
923
924 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
925 src/GLIInstallProfile.py:
926 Fix codeman's screwup of changing the service seperator to ',' in the parser
927 without changing it in the serialization code! Also document this in a
928 comment so you find it easier. Everybody needs to make sure they update
929 their install profiles!
930
931 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
932 src/GLIArchitectureTemplate.py:
933 Fix casting of list to string and concat of None with string, as well as
934 commented prototype of checking that mounting actually worked (found a case
935 where mount can return success, but the mount won't be done).
936
937 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
938 src/templates/x86ArchitectureTemplate.py:
939 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
940 checking for the device, and sleeping 1 second each time.
941
942 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
943 src/templates/x86ArchitectureTemplate.py:
944 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
945 bootloader works again. Also rename _install_{grub,lilo} to
946 _configure_{grub,lilo} since they don't install the loaders anymore
947 themselves.
948
949 7 Jul 2005; Preston Cody <codeman@gentoo.org>
950 fix global USE flags to not include the arch types at the end.
951 updates to GenDialog and gli-d.
952
953 6 Jul 2005; Preston Cody <codeman@gentoo.org>
954 fixing bootloader code for no initrd and initrd->initramfs naming change.
955
956 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
957 Proper comments and parameters to GLIException in install_mta()
958 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
959 Add strip() to list_mirrors(), list_subarch_from_mirror() and
960 list_tarball_from_mirror() to eliminate blank last item.
961
962 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
963 Added stage3 generation code.
964
965 5 Jul 2005; Preston Cody <codeman@gentoo.org>
966 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
967 Mild changes to GenDialog.
968
969 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
970 Remove separate install step configure_rc_conf() since it's handled by
971 update_config_files()
972 Make a copy of newvalues in _edit_config() so quotes aren't added when the
973 function is called twice on the same file.
974
975 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
976 Missing \ in sed in _get_packages_to_emerge()
977 Removed explicit emerging of hotplug and no longer add it to the runlevel.
978 Check in _quickpkg_deps() to ignore blank package names returned from
979 _get_packages_to_emerge()
980
981 28 Jun 2005; Preston Cody <codeman@gentoo.org>
982 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
983 in the dialog.py gauge code.
984
985 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
986 Add code to update_config_files() to go through etc_files and update stuff.
987 Check to see that _etc_files['make.conf'] exists in get_make_conf()
988 Only use float() in partition xml parsing code if type == "free"
989
990 28 Jun 2005; Preston Cody <codeman@gentoo.org>
991 finished almost all internationalization of GenDialog.
992 attempt at fixing rc.conf function. moved 3 generate functions out of
993 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
994 added dialog.py to the fe/dialog directory so it actually gets used.
995
996 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
998
999 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1000 fix extra entry in list_mirrors()
1001 beginning internationalization runthrough.
1002
1003 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1004 added dialog.py to /src temporarily until it gets accepted upstream.
1005 fix for unused value in form in dialog.py and changed heights.
1006 fix GenDialog forms.
1007
1008 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1009 Changed hostname/domainname for new baselayout.
1010 Changed _add_to_runlevel errors to logs.
1011 Updated TODO list to show status of GenDialog
1012 More updates to GenDialog including two checklists that probably won't work.
1013 update IP to use comma-separated list instead of space separated for services.
1014
1015 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1016 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1017 GenDialog as it gets closer to completion.
1018
1019 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1020 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1021 instead of int() in add_partition_device_partition() for minor (closes 96804)
1022
1023 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1024 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1025 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1026 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1027
1028 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1029 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1030 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1031 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1032 Fix undefined variable 'output' issue in spawn().
1033
1034 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1035 More updates to GenDialog and gli-d.
1036
1037 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1038 Modify list_mirrors() to return a list of mirror URL/name pairs.
1039
1040 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1041 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1042 get subarch.
1043
1044 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1045 Backend partitioning will create disklabel is none exists. Installprofile
1046 defaults to "" now instead of "msdos" for disklabel type. Fix for
1047 mount_local_partitions() to remember device along with minor in the
1048 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1049 add else block to log unsupported netmount types to mount_network_shares()
1050
1051 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1052 src/GLIArchitectureTemplate.py:
1053 Refactor kernel_compile common stuff, fix 2.4 build process.
1054 src/fe/cli/clife.py:
1055 Logging system.
1056 src/GLIUtility.py, src/GLIStorageDevice.py:
1057 Add comments about re-writes needed for boxes without sysfs.
1058
1059 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1060 src/GLIArchitectureTemplate.py:
1061 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1062 'make dep' call for custom compile. build_mode support for prepare-only and
1063 none types completed. custom compile function chains shell functions in
1064 spawned script, to allow for catching all errors.
1065
1066 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1067 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1068 and GenDialog. other gendialog updates as well. kernel updates untested.
1069
1070 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1071 src/GLIInstallProfile.py:
1072 Change structure of etc-portage stuff. The serialization was broken before my
1073 last commit, and I am the only person that's ever used it. The new schema is
1074 as follows:
1075 <etc-portage>
1076 <file name="package.mask"/>
1077 <file name="package.unmask">
1078 <entry atom="sys-kernel/openmosix-sources"/>
1079 </file>
1080 <file name="package.use">
1081 <entry atom="sys-libs/db">
1082 -java
1083 </entry>
1084 <entry atom="dev-libs/cyrus-sasl">
1085 -ldap
1086 </entry>
1087 </file>
1088 </etc-portage>
1089
1090
1091 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1092 src/GLIInstallProfile.py:
1093 Add new entry for gli-profile/kernel-build-method item. Add missing
1094 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1095 keys in the same order.
1096
1097 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1098 src/GLIArchitectureTemplate.py:
1099 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1100 was repeatedly appended to make.conf.
1101
1102 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1103 src/GLIArchitectureTemplate.py:
1104 Put some Linux-2.6 specific code under a if statement. Store list of
1105 successfully mounted swap device for using swapoff. Add proper error checking
1106 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1107 'file'. Clean up some redundant code (thanks to pychecker).'
1108
1109 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1110 Fix typos: get_extended() instead of get_extended_partition(). Added
1111 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1112 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1113
1114 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1115 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1116 in add_network_interface.
1117
1118 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1119 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1120 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1121 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1122 prepare_chroot.
1123
1124 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1125 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1126 +src/fe/installer-gtk:
1127 Add new automated CLI frontend. Add scripts that are the intended means to
1128 use each frontend.
1129
1130 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1131 src/GLIClientController.py:
1132 Add null type to network config, for cases where the interface is already up
1133 and should not be touched (netboot for example).
1134
1135 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1136 src/GLIArchitectureTemplate.py:
1137 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1138 string!. Try to use binary packages if available by default.
1139
1140 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1141 src/GLIArchitectureTemplate.py:
1142 More error checking for _add_to_runlevel, to ensure that the init script
1143 actually exists before we try to add it. set_services phase must take place
1144 after the package installation, otherwise the init scripts might not exist.
1145 Find the correct init script for the cron and logging daemons, and add that
1146 instead of the package atom.
1147
1148 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1149 src/GLIArchitectureTemplate.py:
1150 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1151 usage of 'file' to 'contents' for the variable name, as it shadows
1152 __builtin__.file.
1153
1154 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1155 src/GLIArchitectureTemplate.py:
1156 Add MTA install code, and include MTA install phase. Ensure
1157 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1158 for 'none' kernel config for build_kernel phase. Put kernel_script in
1159 /var/tmp instead of /root for build_kernel phase.
1160
1161 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1162 Rename mta variables to match syslog/cron variables.
1163
1164 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1165 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1166 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1167 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1168 src/templates/.cvsignore, src/tests/.cvsignore:
1169 Refactor partition formatting again to include error checking. Allow 'none'
1170 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1171
1172 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1173 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1174 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1175 only have a single spawn call.
1176
1177 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1178 refixed samyron's fix of set_architecture_template.
1179
1180 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1182 be executable.
1183
1184 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1185 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1186 error checking when you call set_architecture_template.
1187
1188 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1189 moved the mkfsopts input to the partition options menu instead of the during
1190 the creation process. updated GenDialog to say it supports reiserfs v3.
1191
1192 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1193 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1194 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1195 Add support for other partition types to dialogfe.
1196 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1197 avoid integer overflows and wraparounds.
1198
1199 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1200 Removed start/end from XML output and added mkfsopts to partitioning info.
1201 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1202 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1203 in GLIClientConfiguration. Change from .1 and .9 to constants for
1204 partitioning. Fix free space overwriting bug. Remove a few unused functions
1205 from rewrite. Fix call to get_partition_at()
1206
1207 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1208 Updates to GenDialog and dialogfe.
1209
1210 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1211 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1212
1213 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1214 more GenDialog updates to partitioning.
1215
1216 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1217 Indenting issue in GLISD/get_ordered_partition_list.
1218 updates to GenDialog partitioning and added default UTC for timezone in IP.
1219
1220 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1221 Added GLISD.get_model()
1222
1223 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1224 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1225 More updates to GenDialog :)
1226
1227 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1228 Added get_interface_realname() function.
1229
1230 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1231 Added auto-save of CConfig and copying to new /root after install.
1232 yet even more GenDialog updates.
1233
1234 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1235 removed print statement from GLISD. more updates to GenDialog.
1236
1237 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1239 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1240 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1241 places in GLIClientConfiguration.
1242
1243 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 Fix mount_local_partitions(), configure_fstab(), and
1245 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1246 A few more fixes for templates/x86Archtemplate
1247
1248 27 May 2005; Preston Cody <codeman@gentoo.org>
1249 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1250 a work in progress.
1251
1252 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1253 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1254 directly. GLISD can now handle data imported from XML.
1255
1256 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1258 handle blank (no disklabel) disks.
1259
1260 20 May 2005; Preston Cody <codeman@gentoo.org>
1261 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1262 up, documented, and separated out serialization and grouped all sections.
1263
1264 19 May 2005; Preston Cody <codeman@gentoo.org>
1265 Reorganization of ClientConfiguration and gutting of unused functions.
1266 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1267
1268 18 May 2005; Preston Cody <codeman@gentoo.org>
1269 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1270
1271 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1272 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1273 partitioning. CC serializes install profile to disk and prepare_chroot()
1274 copies it into /mnt/gentoo/root
1275
1276 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1277 Moved URI parsing into new function parse_uri()
1278
1279 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 Added XMLParser module.
1281
1282 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1284 Minor fix to is_uri() regex to allow hyphens in hostname.
1285
1286 12 May 2005; Preston Cody <codeman@gentoo.org>
1287 Updated finishing_cleanup for new unmounting method from agaffney.
1288
1289 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1290 Fix GLILogger to use correct time format string. Fix _edit_config() to
1291 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1292 unicode support to is_realstring().
1293
1294 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1295 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1296 return value instead of non-zero. Add code to output a traceback to the
1297 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1298 instead of --nocolor.
1299
1300 10 May 2005; Preston Cody <codeman@gentoo.org>
1301 Added GLIGenDialog.py to make a generic class for the dialog functions that
1302 can be used by both dialogfe and the netfe/be. updated both for new filename.
1303 date changes. 2004->2005.
1304
1305 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1306 Removed 'quiet=True' from spawn() calls
1307
1308 10 May 2005; Preston Cody <codeman@gentoo.org>
1309 Updated GLIUtility with patches from chotchki. Also added documentation
1310
1311 9 May 2005; Preston Cody <codeman@gentoo.org>
1312 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1313 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1314 from bug #89683, mostly touchups.
1315
1316 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1317 GLIStorageDevice cleanup patch from bug #91761
1318
1319 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1320 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1321 _edit_config(). Error logging casts 'error' to str
1322
1323 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1324 Exceptions received in CC are logged before being passed to the FE. Added
1325 code to CC to handle exceptions *not* thrown by the installer itself.
1326
1327 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 get_max_mb_for_resize() returns -1 if not self.resizeable
1329
1330 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1331 More dirty rsync hacks :-/
1332
1333 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1334 Patches from chotchki (bug #90325) to improve CC networking. untested.
1335
1336 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1337 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1338 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1339 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1340 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1341 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1342 _get_packages_to_emerge()
1343
1344 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1345 Added group-adding code to set_users in ArchTemplate
1346
1347 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 Added post-install script code
1349
1350 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Fixed encapsulation issues in GLIClientController (bug #90141)
1352
1353 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 Update resizing code in GLIStorageDevice
1355
1356 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1357 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1358
1359 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1360 Reverted change to ArchTemplate and added support for commented line in old
1361 code.
1362
1363 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1364 Changed _edit_config() to modify value in-place instead of commenting out and
1365 adding the new value to the end of the file.
1366
1367 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1368 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1369 Also updated TODO list.
1370
1371 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1372 Use blackace's one-liner to add comments for all function for use with
1373 pythondoc.
1374
1375 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1376 Moved 'end >= device_sectors' check out of loop to check for next partition's
1377 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1378 Partitioning code now tracks start/end of extended for placing logicals. End
1379 point of logical is now adjusted along with start.
1380
1381 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1382 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1383 the way of partitioning from a blank disk. Add int() around access to minor
1384 key in partition information due to new partition code leaving them as float.
1385
1386 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1388
1389 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1391
1392 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1393 Added support for DHCP options and MAC addresses in the InstallProfile.
1394
1395 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1396 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1397 sed to properly strip out junk.
1398
1399 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1400 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1401 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1402
1403 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1404 Fixed indent problem in GLICController
1405
1406 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1407 Check for disklabel type "loop" and use the device name without a minor.
1408
1409 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1410 Remove /tmp/compile_output.log and /var/log/install.log when install is
1411 complete. Added code to (hopefully) keep 2nd thread running after install.
1412 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1413 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1414 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1415
1416 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1417 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1418 when unpacking tarball.
1419
1420 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1421 rewrote filesystem_tools. looks like it works so ripping out all the old
1422 filesystem_tools code.
1423
1424 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1425 Changed the print statements to logging in the partitioning BE code.
1426 the logger may need to be imported to the x86archtemplate. unknown yet.
1427 Added the finishing_cleanup function.
1428 added a fix to the logger from BenUrban
1429
1430 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1431 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1432 URIs. The blank uri check has been commented out.
1433 ripped out error checking of set_services. this is done by _add_to_runlevel.
1434
1435 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1436 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1437
1438 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1439 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1440 the install profile if available. Commented out spawn() debugging prints
1441
1442 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1443 small changes to setup_network_post. moved adding to runlevel of net.x to
1444 after the device gets symlinked. added domainname runlevel command.
1445
1446 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1447 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1448 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1449 spawn() call in livecd-kernel code to pass environment variables.
1450 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1451 the install profile if available.
1452
1453 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1454 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1455 to handle installing the livecd kernel into the new system.
1456
1457 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1458 should emerge hotplug and coldplug before adding them to runlevel.
1459
1460 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1461 took chroot out of grub_install command.
1462
1463 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1464 Changed chroot wrapper code in spawn() to write the wrapper the python way
1465 instead of the bash way to avoid quote conflicts. Added
1466 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1467 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1468 as it breaks the piping.
1469
1470 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1471 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1472
1473 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1474 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1475 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1476 GLIInstallProfile.
1477
1478 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1479 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1480 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1481 into /mnt/gentoo in prepare_chroot()
1482
1483 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1484 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1485 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1486 to start/end sectors
1487
1488 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1489 Add 2>&1 to cmd in spawn()
1490
1491 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1492 Modified GLIUtility.exitsuccess() to work with return value from
1493 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1494 creates wrapper script for commands run inside chroot so multiple commands
1495 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1496 for the generated script from spawn()
1497
1498 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1499 Removed default values for stage tarball URI and portage tree URI from
1500 InstallProfile. These should be set by the FEs. also added services step to
1501 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1502 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1503
1504 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1505 Small fix for setting the default gateway. Also added feature to dialogfe.
1506
1507 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1508 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1509
1510 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1511 Fixed a bunch of true -> True typos. lots of em
1512 only write new resolv.conf if there are dns servers listed.
1513
1514 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1515 Commented out 'display_on_tty8=True' in start_portmap()
1516
1517 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1518 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1519
1520 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1521 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1522 lang parameter to __init__()
1523
1524 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1525 updates to TODO list.
1526
1527 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1528 Initial code for quickpkg GRP support. Fix loop to grab packages from
1529 'emerge -p blah'
1530
1531 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1532 check for dhcp in the network stuff and emerge it if it is.
1533 added quickpkg to TODO list
1534
1535 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1536 Changed the raising of 'warning' exceptions to a simple log of the error
1537 so that the installer can continue.
1538
1539 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1540 Some big changes. First, changed most output to display_on_tty8.
1541 Second, added log lines to all templates. Some smaller fixes such as typos.
1542 Also did some cleanups of old commented lines.
1543
1544 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1545 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1546 Undo change with fix. Escaping fix in GLIStorageDevice.py
1547
1548 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1549 more updates to TODO list. hopefully we'll soon start removing items instead
1550 of adding them.
1551
1552 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1553 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1554
1555 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1556 updated TODO list. (again)
1557
1558 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1559 changed output of portmap start to display_on_tty8.
1560 fixed bootloader for udev and multiple kernels
1561 fixed custom kernel config (again)
1562
1563 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1564 changed default value of CC._enable_ssh to True because this is smart.
1565 added code to allow custom kernel .config. may be unstable and break. sorry.
1566
1567 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1568 partition() now waits until after it checks for partition flags before delete
1569 the partitions :P
1570
1571 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1572 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1573 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1574 blank.
1575
1576 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1577 Various fixes related to the add_users function. Still not yet finished.
1578 Added things to the TODO list. Lets start using that!
1579
1580 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1581 Added code to x86Template to format newly created partitions. Also added
1582 some error checking code. GLIStorageDevice passes 'minor' with data to
1583 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1584 mounting code.
1585
1586 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1587 Took out unnecessary setting of random livecd root password. the cd already
1588 sets it randomly.
1589
1590 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1591 Took out an unneeded step from CC's run()
1592
1593 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1594 Attempt at detecting and adding windows partitions to lilo.
1595
1596 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1597 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1598 partition. fixed misc exit_status => exitstatus typo.
1599
1600 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1601 Added basic code for resizing filesystems with pyparted. Fixed code for
1602 resizing ntfs and ext2/3.
1603
1604 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1605 Fixed partition() in x86Template so that it scans through logicals and deletes
1606 before deleting containing extended partition. Also clears partition table to
1607 be safe before third pass.
1608
1609 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1610 Added mount_network_shares. not able to test it from this computer.
1611 will test when i get back to school.
1612 also added start_portmap to the client_controller as an always-do.
1613 agaffney says this is needed for NFS mounts to work.
1614
1615 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1616 Partial rewrite of partitioning code in x86Template. No longer shells out to
1617 parted to perform actions, now uses all pyparted calls. Code "works" in a
1618 test, but still needs lots of TLC. Also modified tests/install.py to work
1619 with x86Template and GLIClientConfiguration.
1620
1621 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1622 Initial move of partitioning code from ArchTemplate to x86Template.
1623
1624 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1625 Added grp_install and services to InstallProfile. forgot about the set_root_password
1626
1627 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1628 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1629 Test Install ran very well (skipping partitioning).
1630
1631 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1632 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1633 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1634 some may still have eluded me.
1635
1636 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1637 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1638 Just finished mount_local_partitions in GLIArchitectureTemplate
1639
1640 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1641 Added get_num_sectors() to GLIStorageDevice.
1642
1643 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1644 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1645 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1646 from GLIInstallProfile.
1647
1648 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1649 GLIStorageDevice returns "unknown" instead of "" for get_type()
1650
1651 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1652 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1653 actually work. Commented out resizability checking code for speed.
1654
1655 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1656 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1657 GLIStorageDevice at the suggestion of plors
1658
1659 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1660 Added a function to GLIUtility to pull a value from a make.conf-style config
1661 file. Minor type fix to GLIInstallProfile.py
1662
1663 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1664 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1665 network mounts from partition data structure in GLIInstallProfile
1666
1667 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1668 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1669 can be resized.
1670
1671 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1672 Added some of the final functions to GLIInstallTemplate.
1673 Yes this project is still active despite rare use of the Changelog!
1674
1675 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1676 Added the GLIPartitionTools.py file. This is a temporary insertion of
1677 partitioning tools that will eventually go into their own package.
1678
1679 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1680 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1681 for the program). Added __init__(install_profile, client_configuration) to
1682 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1683 to avoid constantly passing stuff every time we call a method.
1684
1685 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1686
1687 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1688 files without messing up all the other stuff in them. This will be used for making
1689 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1690
1691 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1692
1693 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1694 have a few basic things. I added two private methods. One is _depends(). This
1695 will be used for dependency checking (ie. unpacking a tarball requires that
1696 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1697 same syntax as os.system(), however, instead of being run in the liveCD
1698 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1699 isolated the code. Hope to work more this week to get this class formed...
1700
1701 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1702
1703 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1704 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1705 to allow for easier modification (mutable, rather than immutable objects). Updated
1706 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1707 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1708 Added initial unit test code.
1709
1710 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1711
1712 Added initial changelog. Setting up the basic structure of the CVS repository
1713 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1714 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20