/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1348 - (show annotations) (download)
Mon Mar 6 21:59:23 2006 UTC (8 years, 7 months ago) by agaffney
File size: 71329 byte(s)
  wait for device node to exist before resizing
  add -v to ntfsresize command
  src/GLIStorageDevice.py:
  return start/end with ip structure
  pad min ntfs size by 50 MB just to be safe

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.614 2006/03/06 21:59:23 agaffney Exp $
5
6 7 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/templates/x86ArchitectureTemplate.py:
8 bootloader and partitioning external commands log to compile_output.log
9 wait for device node to exist before resizing
10 add -v to ntfsresize command
11 src/GLIStorageDevice.py:
12 return start/end with ip structure
13 pad min ntfs size by 50 MB just to be safe
14
15 5 Mar 2006; Preston Cody <codeman@gentoo.org>
16 add error catching and text to saving profile dialogs
17
18 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIPortage.py:
20 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
21 src/templates/x86ArchitectureTemplate.py:
22 fix checks for changed partitions so they will actually get deleted
23
24 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
25 src/GLIClientController.py:
26 slightly better error handling for pre-install failures
27
28 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
29 src/templates/x86ArchitectureTemplate.py:
30 proper return code checking for ext2/3 resizing
31
32 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
33 src/GLIClientController.py:
34 accept 'none' as well as 'null' for network type
35 src/GLIArchitectureTemplate.py:
36 ignore extended partitions in mount_local_partitions()
37 src/templates/x86ArchitectureTemplate.py:
38 use get_ordered_partition_list() instead of keys().sort() for new_part_list
39 check to make sure start sector for primary isn't less than end sector for
40 previous extended
41 src/GLIClientController.py:
42 write dns servers to /etc/resolv.conf
43
44 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
45 src/GLIPortage.py:
46 copy_pkg_to_chroot() uses compile_output.log for command output
47
48 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
49 only keep a 1000 line 'scrollback' buffer for the compile output and log file
50
51 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
52 src/GLIPortage.py:
53 add code make GLIPortage.py capable of being run stand-along for dynamic
54 stage3 generation and copying packages in a GRP-ish way
55 grp code fixups
56
57 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
58 src/GLIPortage.py:
59 ignore blank packages passed to get_deps() and emerge()
60
61 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
62 src/GLIUtility.py:
63 add get_chosts() function
64
65 *GLI-0.3 (12 Feb 2006)
66
67 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
68 src/templates/x86ArchitectureTemplate.py:
69 pull old start/end sector values from somewhere that actually has them
70 add logic for extended partition to code that makes sure new end sector
71 doesn't overlap start sector of next partitions
72 don't freak out if partition can't be deleted
73
74 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
75 src/GLIPortage.py:
76 run env-update at the end of copy_pkg_to_chroot()
77
78 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
79 src/templates/x86ArchitectureTemplate.py:
80 I'm a complete fscking dumbass. I recorded the end sector for partitions that
81 weren't being touched, but I never used it when recreating them...the end was
82 calculated from the size in MB instead :/
83
84 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
85 src/GLIArchitectureTemplate.py:
86 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
87 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
88 src/GLIPortage.py:
89 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
90 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
91 'resized' flag
92
93 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
94 src/GLIPortage.py:
95 short circuit and check vdb directly if package begins with '='
96
97 8 Feb 2006; Preston Cody <codeman@gentoo.org>
98 added more packages to extra_packages list in IP
99
100 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
101 src/templates/x86ArchitectureTemplate.py:
102 10 tries to create filesystem instead of 3
103 src/GLIPortage, src/GLIArchitectureTemplate.py:
104 ignore_missing flag for copy_pkg_to_chroot()
105
106 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
107 src/GLIPortage.py:
108 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
109
110 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/net/server/gliserv.py:
112 fix handling of 404 for real files
113 src/net/server/GLIServerProfile.py:
114 look for 'hostname' in attributes instead of 'name'
115
116 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
117 src/SimpleXMLParser.py:
118 initial support for 'include' in XML files
119 src/GLIStorageDevice.py:
120 initial support for %
121 src/GLIClientController.py:
122 add debugging statements to pre-install steps
123
124 15 Jan 2006; Preston Cody <codeman@gentoo.org>
125 webgli/configfiles:
126 check for key in etc_files['rc.conf'] to fix key error
127 webgli/timezone: small fix.
128 webgli/extrapackages: list-type fix
129 webgli/services: same
130 glimd: add/edit_client updates.
131
132 12 Jan 2006; Preston Cody <codeman@gentoo.org>
133 added configure.pyhtml to glimd. minor changes
134 to top and add_client. fixed up showargs.
135 added execute.pyhtml
136 changed register clients line in gliserv for name->hostname.
137 updated TODO.
138
139 10 Jan 2006; Preston Cody <codeman@gentoo.org>
140 src/net/server/*:
141 added add/del/edit client/profile.pythml for glimd.
142 updated templates, showclients, and gliserv.
143
144 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
145 src/net/server/*:
146 stupid threading module...
147
148 8 Jan 2006; Preston Cody <codeman@gentoo.org>
149 AT: rc.conf -> conf.d/clock
150
151 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIPortage.py:
153 show 'Calculating dependencies for ...' in subprogress bar at beginning of
154 emerge()
155 src/GLIArchitectureTemplate.py:
156 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
157 in the chroot
158 remove _quickpkg_deps() and _portage_best_{visible,version}()
159 src/GLIUtility.py:
160 fail immediately in validate_uri() if provided URI can't be parsed
161 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
162 debug code in spawn()
163 use lower-level os.read() instead of file.read() because python sucks
164 src/templates/x86ArchitectureTemplate.py:
165 basic subprogress reporting for partitioning
166 total_steps was 1 too high
167
168 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
169 src/GLIUtility.py:
170 move parse_vdb_contents() to GLIPortage
171 src/GLIPortage.py:
172 remove all symlink fixups
173 ignore 'dir' entries in CONTENTS
174 call tar with -p
175
176 5 Jan 2006; Preston Cody <codeman@gentoo.org>
177 AT: bootsplash is now gensplash
178 gliserv: add advanced_mode to shared_info
179 webgli: Added advanced mode. mostly just disables a few screens.
180
181 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/GLIPortage.py:
183 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
184 added emerge()
185 update sub-progress after each package is emerged
186 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
187 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
188 remove link if it exists before moving content into place
189 src/GLIArchitectureTemplate.py:
190 install_packages() now calls emerge() in GLIPortage
191 change all calls to self._emerge() to self._portage.emerge()
192 comment out all emerge status checking...using exceptions now
193 call copy_pkg_to_chroot() directly for livecd-kernel
194
195 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
196 src/GLIArchitectureTemplate.py:
197 remove add_pkg_to_world() and copy_pkg_to_chroot()
198 copy installer.log to installer.log.failed on install failure
199 src/GLIUtility.py:
200 added get_keymaps()
201 spawn() takes any False argument for chroot instead of just None
202 src/GLIPortage.py:
203 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
204 change copy_pkg_to_chroot() to work properly with use_root=False
205 figure PORTAGE_TMPDIR properly
206
207 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
208 src/net/server/html/*:
209 converted showclients, load/saveprofile
210
211 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
212 src/GLIPortage.py:
213 exclude packages already in chroot vdb from binary deplist
214 chroot to use best_version for chroot's vdb
215 src/runtimedeps.py:
216 accept ROOT via commandline instead of env
217
218 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
219 src/runtimedeps.py:
220 remove passing of ROOT
221 src/GLIPortage.py:
222 modify get_deps() to get deptree for each package and merge into final list
223 remove depgraph class
224 add debugging code to get_deps()
225 src/GLIArchitectureTemplate.py:
226 combine code for GRP/compile in install_packages() into one block
227 debugging code in install_packages()
228
229 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
230 src/runtimedeps.py:
231 initial commit
232 src/GLIPortage.py:
233 use separate script for GRP deps
234 remove calls to portage module
235
236 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
237 src/GLIPortage.py:
238 initial commit
239 move some of portage function from GLIAT
240 flipped around a few function args
241 src/GLIArchitectureTemplate.py:
242 revamp install_packages() for new GLIPortage
243
244 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
245 src/GLIArchitectureTemplate.py:
246 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
247
248 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
249 src/net/server/gliserv.py:
250 wrap generated code in a class to isolate it a bit better
251 302 redirects work
252 don't use cgi.escape() for <% %>
253 src/net/server/html/webgli/*:
254 load/save profile
255 src/GLIUtility.py:
256 change /sbin/lspci to just lspci
257
258 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
259 src/GLIClientController.py:
260 change ordering of statements in CC run() while loop to not go past the end
261 of the array
262 src/GLIArchitectureTemplate.py:
263 removed redundant bind mounts
264
265 18 Dec 2005; Preston Cody <codeman@gentoo.org>
266 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
267 added a diagram by blackace from last night.
268 added the glossary in RTF format.
269
270 17 Dec 2005; Preston Cody <codeman@gentoo.org>
271 x86AT: separated out emerge/configure from running of bootloader
272 added MBR drive support to lilo.
273 these changes will likely not work.
274 AT: added setup_and_run_bootloader step.
275
276 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
277 src/net/server/gliserv.py:
278 call generated code in a function
279 src/net/server/html/webgli/*:
280 include top/bottom
281 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
282 src/GLIClientCongifuration.py:
283 install mode magic
284
285 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
286 src/GLIClientController.py:
287 use GLIException when there's an import problem
288 added debug code to show install_steps
289 src/templates/amd64ArchitectureTemplate.py:
290 add . to import path
291 proper path this time: ../../templates
292 src/GLIArchitectureTemplate.py:
293 add _portage_best_version() function
294
295 11 Dec 2005; Preston Cody <codeman@gentoo.org>
296 added initial glossary and gimli diagram to the docs directory.
297 modify gli-dialog to allow editing of the install_profile after loading XML.
298
299 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
300 src/net/server/html/webgli/:
301 converted globaluse, localuse, networkmounts, portagetree, and stageselection
302 moved saveclientconfig stuff into clientconfig
303 moved saveconfigfiles into config files
304 converted etc_portage and makedotconf
305 converted bootloader and kernel
306 convert daemons, extrapackages, networking, review, services, timezone, users
307 src/net/server/gliserv.py:
308 proper 404 handling for .pyhtml extension
309 HTML escape <% %> stuff
310 work around python's sucky regexes
311 src/GLIInstallProfile.py:
312 allow set_{rsync,ftp,http}_proxy() to accept empty values
313
314 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
315 src/net/server/gliserv.py:
316 initial commit of Legolas templating engine
317 302 redirects
318 src/net/server/html/index.html, src/net/server/webgli_template.html:
319 minor changes for new code
320 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
321 initial commit of the conversion from the monolithic WebGLIHandler.py to the
322 one file per path Legolas goodness
323 partitioning[2-4] done
324
325 5 Dec 2005; Preston Cody <codeman@gentoo.org>
326 webgli: dhcp options in CC and post-install.
327 updated comparison chart.
328 webgli: etc/portage/* and distcc support added. not too-well tested.
329
330 4 Dec 2005; Preston Cody <codeman@gentoo.org>
331 webgli_template.html: valign=top on left side.
332 webgli: fix bootloader boot_device. now working.
333 webgli: CC proxy done. post-install proxy in progress.
334
335 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
336 src/net/server/webgli_template.html:
337 increase padding for content cell to 7px and add colspan=2
338
339 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
340 webgli: added graphic bar on top
341 webgli: added hover effects on the links on the left
342 webgli: re-rendered header_bg.png to stretch without artifacts
343
344 3 Dec 2005; Preston Cody <codeman@gentoo.org>
345 webgli: make.conf disabling fixes for dynamic_stage3
346 fixed portage snapshot browse popup
347 all changes tested.
348 webgli: add debug mode to CC screen. the screen still needs lots of work.
349
350 1 Dec 2005; Preston Cody <codeman@gentoo.org>
351 added debug mode question to gli-dialog
352 added CC proxies to CC networking for gli-dialog
353 webgli: fixed skip CC networking if connection active
354 webgli: portage snapshot defaults to CD
355 webgli: bootloader mbr drive selection
356 webgli: USE flags unselectable if dynamic_stage3
357 webgli: manual extra packages and save button.
358
359 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
360 src/GLIUtility.py:
361 change ping count to 2
362 docs/comparison.html
363 initial commit
364
365 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
366 src/templates/x86ArchitectureTemplate.py:
367 fix map() issue with grub code
368 replace kernel_names and initrd_names loops with one-liners
369
370 27 Nov 2005; Preston Cody <codeman@gentoo.org>
371 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
372 initial gli-dialog support for recommended partitioning layout and clear.
373 failure cleanup now an option for gli-dialog.
374 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
375 added comparison list and updated TODO!
376
377 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
378 src/GLIArchitectureTemplate.py:
379 fix to stage1() debug code
380 fix to stage2() debug code
381
382 26 Nov 2005; Preston Cody <codeman@gentoo.org>
383 some more bootloader code fixes. forgot boot_device != mbr_device.
384
385 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
386 src/GLIStorageDevice.py:
387 fix to unallocated space merging when last one is after part 4
388
389 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
390 src/GLIArchitectureTemplate.py:
391 small fix to debugging code in copy_pkg_to_chroot()
392
393 23 Nov 2005; Preston Cody <codeman@gentoo.org>
394 more bugfixes with bootloader code
395 gli-dialog side appears to work
396
397 21 Nov 2005; Preston Cody <codeman@gentoo.org>
398 initial adding of boot_device to backend.
399 initial boot_device support added to gli-dialog.
400 some fixes of my poor coding
401
402 20 Nov 2005; Preston Cody <codeman@gentoo.org>
403 converted gli-dialog to use the install_package_list.
404 gtkfe has already been converted by AllanonJL
405 new way working in gli-dialog now and added to webgli.
406 added set/get_boot_device() to IP
407
408 19 Nov 2005; Preston Cody <codeman@gentoo.org>
409 get_install_package_list added to InstallProfile. This can be used by the FEs
410
411 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
412 src/templates/x86ArchitectureTemplate.py:
413 call ls with '-1 --color=no'
414
415 16 Nov 2005; Preston Cody <codeman@gentoo.org>
416 added warning (#9) to GRP ppl about stage3 tarballs
417
418 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
419 src/GLIArchitectureTemplate.py:
420 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
421 confused
422
423 13 Nov 2005; Preston Cody <codeman@gentoo.org>
424 removed protocols from rc.conf screens
425 finished initial rc.conf and make.conf in webgli
426
427 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
428 src/net/server/gliserv.py:
429 add -h option to usage()
430 show time and request URI in debug mode
431 show client IP in debug mode
432 just use IP instead of trying to do a reverse lookup
433
434 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
435 src/net/server/gliserv.py:
436 'classier' 401 message
437 proper commandline parsing
438 help via -h
439 user/pass can be specificed via commandline option
440
441 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
442 src/net/server/gliserv.py:
443 basic HTTP auth
444
445 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
446 src/net/server/gliserv.py:
447 dynamic module reloading (yipee!)
448 send 'Last-Modified' header for real files
449 respond to HEAD with just headers
450 src/net/server/handlers/WebGLIHandler.py:
451 icons for drives
452
453 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
454 src/net/server/handlers/WebGLIHandler.py:
455 initial 'pretty' partition table display support
456 clicking partition in 'pretty' display works instead of radio buttons
457 radio buttons and pretty display work together
458 META redirect instead of javascript
459 pretty display stretches across entire screen
460 'Recommended layout' and 'Clear drive' functions
461 properly catch exceptions from do_recommended()
462 src/GLIArchitectureTemplate.py:
463 replace preinst, copy, postinst, rm steps with qmerge
464 whoops...that shouldn't have been commented out
465 create image_dir with -p in copy_pkg_to_chroot()
466 more generic of symlink crappiness
467 new copy_pkg_to_chroot() actually works now
468
469 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
470 src/GLIStorageDevice.py:
471 initial generic disk support
472 fixes for add_partition() code
473 src/net/server/handlers/WebGLIHandler.py:
474 added support for creating generic disks
475 add new partition working
476 save and delete partitions
477
478 6 Nov 2005; Preston Cody <codeman@gentoo.org>
479 webgli: Partitioning making progress.
480
481 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
482 src/GLIArchitectureTemplate.py:
483 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
484 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
485 dir) and works around /etc/gconf symlink problem
486
487 5 Nov 2005; Preston Cody <codeman@gentoo.org>
488 webgli: lots of updates. preliminary partitioning. extra packages works.
489
490 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
491 src/net/server/gliserv.py:
492 httpd now supports HTTPS and falls back to HTTP if not available
493 make fallback actually work
494 src/net/server/SecureXMLRPCServer.py:
495 SecureSocketServer is now threaded
496
497 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
498 src/net/client/gliclient.py:
499 try to use HTTPS for XMLRPC first and fallback to HTTP
500 pretend mode
501 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
502 HTTPS XMLRPC goodness from samyron
503 pass name of certificate
504
505 31 Oct 2005; Preston Cody <codeman@gentoo.org>
506 wegli: daemons and services screens done.
507
508 30 Oct 2005; Preston Cody <codeman@gentoo.org>
509 webgli: networking and users screens
510 added return_redirect to handler.py
511 loading and saving install/client profiles works for webgli now
512 Review also done
513
514 *GLI-0.2 (27 Oct 2005)
515
516 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
517 src/templates/x86ArchitectureTemplate.py:
518 properly check for bootloader emerge exist status with exitsuccess()
519 log output of grub install command
520 add --batch --no-floppy to grub command
521 grubinstallstring only gets logged if debug is on
522 src/GLIUtility.py:
523 update progress bar to 100% when process finishes
524
525 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/GLIClientController.py:
527 added debugging code for the interaction between the 2 threads via Event()
528 src/GLIUtility.py:
529 doubled the buffer size in spawn()
530 bump buffer size up to 16384
531 only report progress in 5% increments
532 src/GLIArchitectureTemplate.py:
533 kernelpkgs.txt support code
534 above disabled because it sucks
535 added add_pkg_to_world()
536
537 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
538 src/GLIArchitectureTemplate.py:
539 use tar | tar to copy files in copy_pkg_to_chroot()
540 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
541
542 23 Oct 2005; Preston Cody <codeman@gentoo.org>
543 DEBUGGING ADDED TO AT. verbose field added to CConfig.
544
545 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/net/server/gliserv.py:
547 / maps to index.html
548 look for actual files in html/
549 src/net/html:
550 new template
551 src/GLIUtility.py:
552 added parse_vdb_contents()
553 src/GLIArchitectureTemplate.py:
554 added copy_pkg_to_chroot()
555 added debug code to dynamic-stage3
556 switch dynamic-stage3 to new method
557 lots of bug fixes from adding debug code
558
559 22 Oct 2005; Preston Cody <codeman@gentoo.org>
560 webgli initial bootloader support + changed make.conf.
561 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
562
563 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
564 src/GLIUtility.py:
565 horrible tangled mess of code that is tarball unpacking subprogress display
566 add unpack progress to portage snapshot
567 use read() instead of readlines() in spawn()
568 only update progress bar for whole percents
569
570 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
571 src/templates/x86ArchitectureTemplate.py:
572 change call to 'grub' to use GLIUtility.exitsuccess()
573 add definition of 'build_mode' in _configure_lilo()
574 src/misc/updategtkfe, src/misc/updateglid:
575 fix so subshell is called in root shell
576
577 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
578 src/net/server/handlers/WebGLIHandler.py:
579 stage screen launches URI browser in sized window with various properties set
580
581 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
582 src/misc/updategtkfe:
583 updated to actually work
584 remove previous snapshot and extracted dir before downloading
585 src/misc/updateglid:
586 updated to actually work
587 src/templates/x86ArchitectureTemplate.py:
588 fixed bug where grub code was looking for 'root+root+file_name2'
589
590 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
591 src/net/server/handlers/WebGLIHandler.py:
592 URI browser
593 added mirror selection
594 src/GLIUtility.py:
595 ls via ssh strips off ending *
596
597 16 Oct 2005; Preston Cody <codeman@gentoo.org>
598 more updates to webgli. stage selection.
599
600 11 Oct 2005; Preston Cody <codeman@gentoo.org>
601 updated webgli with preliminary Network Mounts support.
602
603 9 Oct 2005; Preston Cody <codeman@gentoo.org>
604 GenDialog: string formatting and yes/no label fixes.
605 added WebGLI template for gliserv.py
606 added WebGLIHandler as well as a definition for it in gliserv.py
607 updates to the webgli files even though they won't be there for long.
608 Utility: remove exception for non-existant grppkgs.txt until the new livecd
609 goes public.
610
611 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
612 src/net/server/gliserv.py:
613 override dict to not be so anal
614 main server now loads separate module to handle requests
615 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
616 split out profile URLs into separate handler function
617 move handlers into subdirectory
618 add Welcome and Clients handlers
619
620 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
621 src/GLIUtility.py:
622 raise exception if password prompt received twice
623
624 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
625 src/GLIUtility.py:
626 removed rot13ify()
627
628 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
629 src/net/server/gliserv.py:
630 allow for param to be passed multiple times in GET
631 no XMLRPC functions return None
632 modify POST request parsing to only create a list if needed
633 fix GET request parsing so the list creation for multiple values works
634 src/net/client/gliclient.py:
635 various typo and type mismatch fixes
636 exit after exception
637
638 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/net/client/gliclient.py:
640 initial commit
641 pass MAC to XMLRPC functions
642 src/net/server/GLIServerProfile.py:
643 rename GLIClientsProfiles to GLIServerProfile
644
645 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
646 src/net/server/gliserv.py:
647 now handles POST requests
648 move majority of request handling code to common_handler() to reduce code
649 duplication
650 profile loading
651 client reg via XMLRPC goes into SharedInfo()
652 /showclients redesign
653 template fixes
654 allow handler functions to add/change headers
655 save profile
656
657 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
658 src/net/server/GLIClientsProfiles.py:
659 initial commit
660 src/net/server/template.html:
661 initial commit
662 src/net/server/gliserv.py:
663 add template mojo
664
665 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
666 src/net/server/gliserv.py:
667 XMLRPC mojo
668
669 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
670 src/GLIArchitectureTemplate.py:
671 add code in _edit_config() to comment line where variable is defined
672 previously
673 insert new line under previous definition of variable if it exists
674 small _edit_config() cleanup
675 src/GLIStorageDevice.py:
676 add clear_partitions() function
677 new sizes for recommended partition layout
678 automatically calculate swap size for recommended layout
679
680 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
681 src/templates/x86ArchitectureTemplate.py:
682 fat16 mojo
683
684 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
685 src/GLIStorageDevice.py:
686 prevent do_recommended() from being run twice
687 rewrite do_recommended() to be more robust
688 src/GLIArchitectureTemplate.py:
689 rework _edit_config() to not write duplicate entries
690
691 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
692 src/GLIStorageDevice.py:
693 added do_recommended() function to automatically created 256M/1G/* layout
694
695 17 Sep 2005; Preston Cody <codeman@gentoo.org>
696 src/gli-dialog.py: added set_distcc to the list
697 GenDialog: added set_distcc. untested.
698 IP: added install_distcc flag.
699 AT: added install_distcc function based on the flag. runs after build_kernel
700 changed AT spawn command for distcc for nodeps.
701
702 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
703 src/GLIUtility.py:
704 add rot13ify() function
705
706 16 Sep 2005; Preston Cody <codeman@gentoo.org>
707 src/GenDialog.py
708 added a sentence of text. unchecking support added.
709
710 15 Sep 2005; Preston Cody <codeman@gentoo.org>
711 src/GLIUtility.py
712 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
713 src/GenDialog.py
714 still working on extra_packages. transformed the list to new format.
715 added GRP indication to list. untested.
716 TODO lists updated.
717 src/fe/dialog/gli-dialog.py
718 spelling mistook.
719
720 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
721 src/GLIUtility.py:
722 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
723
724 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
725 src/GLIUtility.py:
726 add get_directory_listing_from_uri()
727 add http support to above
728 add ftp support to above
729 add scp support to above
730 src/GLIArchitectureTemplate.py:
731 "0" instead of 0 for key of single-element dict passed to _edit_config()
732
733 5 Sep 2005; Preston Cody <codeman@gentoo.org>
734 value_only -> only_value
735
736 3 Sep 2005; Preston Cody <codeman@gentoo.org>
737 gutted out all of etc_portage structure since it is now all handled by
738 etc_files
739
740 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
741 src/GLIArchitectureTemplate.py:
742 install_packages() sends progress update notifications
743 src/templates/x86ArchitectureTemplate.py:
744 increase sleep to 5s between format tries
745 src/GLIClientController.py:
746 pass 'self' to AT instead of 'self._pretend'
747
748 2 Sep 2005; Preston Cody <codeman@gentoo.org>
749 logger -> logger.log in x86AT
750
751 1 Sep 2005; Preston Cody <codeman@gentoo.org>
752 added set_etc_portage to IP. debugging gli-d's support for it.
753
754 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
755 src/templates/x86ArchitectureTemplate.py:
756 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
757
758 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
759 src/GLIArchitectureTemplate.py:
760 add _portage_best_version() function and rework install_packages() to allow
761 for future X of Y tracking
762 Use best_visible instead of best_version
763 tracked down and fixed missing = causing empty install extra packages
764 use = when emerging also
765 quickpkg hokey pokey
766 run _get_packages_to_emerge() again with -pk
767
768 22 Aug 2005; Preston Cody <codeman@gentoo.org>
769 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
770 the end of install_packages.
771 added updateglid to /src/misc
772 updated all core files with new GPL notice and copyright statement.
773
774 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
775 src/GLIUtility.py:
776 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
777 a snapshot in /mnt/cdrom/snapshots/
778 get_snapshot_from_cd() adds file:// at the beginning
779 change calls to extra package special case functions to 'self.blah'
780
781 21 Aug 2005; Preston Cody <codeman@gentoo.org>
782 src/ArchTemplate: changed "voodoo".
783 changed order of portage sync methods. made a fallback to webrsync if
784 normal emerge sync fails.
785 removed get_sources_from_cd because it is obsolete.
786 add special cases to install_packages. remove fatal exception on package
787 install failure b/c the box will still be bootable.
788 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
789 handled in the FEs.
790 src/GenDialog: added a bunch of code for dealing with x11-based packages.
791 awaiting testing.
792
793 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/GLIStorageDevice.py:
795 global try/except block around fs resizable detection code
796 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
797 install-failed cleanup function
798
799 18 Aug 2005; Preston Cody <codeman@gentoo.org>
800 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
801
802 16 Aug 2005; Preston Cody <codeman@gentoo.org>
803 GLIGenDialog:
804 add drive choices for loaded configs.
805 force snapshot for dynamic_stage3
806 init the snapshoturi input to the cd snapshot if not already selected.
807 if dynamic_stage3, skip the make.conf step.
808 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
809 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
810
811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
812 src/GLIArchitectureTemplate.py:
813 manually call MAKEDEV in stage3-dynamic code
814 copy /etc/inittab.old to /etc/inittab in chroot
815 src/GLIUtility.py:
816 add beginning of validate_uri() function
817 add file:/// support to validate_uri()
818 single quotes when setting livecd password
819
820 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
821 src/GLIGenDialog.py:
822 change getmountpoint() to get_mountpoint()
823 src/misc/updategtkfe:
824 committed script to automatically download latest snapshot and run gtkfe
825 src/templates/x86ArchitectureTemplate.py:
826 fix _configure_lilo_add_windows() for IP -> GLISD stuff
827 src/GLIArchitectureTemplate.py:
828 give tmp_minor an initial value in mount_local_partitions so that the value
829 remain from the previous drive
830
831 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
832 src/templates/x86ArchitectureTemplate.py:
833 Fix _configure_lilo() for IP using GLISD stuff
834 src/GLIArchitectureTemplate.py:
835 install_cron_daemon() treats "none" specially
836
837 14 Aug 2005; Preston Cody <codeman@gentoo.org>
838 old patch from Steven Mertens to resolve bug #96642
839 numerous asthetic changes to GenDialog, no real functionality changes though.
840 strings renamed for global use if necessary.
841 fix all three parts of bug 102291
842 disable set_etc_portage until fully-written.
843
844 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
845 src/GLIClientController.py:
846 lower-case http/ftp proxy envvars
847
848 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
849 src/GLIClientController.py:
850 log end of pre_install steps to aid in debugging
851 src/templates/x86ArchitectureTemplate.py:
852 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
853
854 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
855 src/GLIArchitectureTemplate.py
856 check to make sure that the device node we're wait for to exist isn't of
857 type 'free'
858
859 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
860 src/GLIGenDialog.py:
861 convert install_packages to list in set_extra_packages()
862 check return code of checklist() call in "Manual" section
863 *actually* fix the first problem
864
865 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
866 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
867 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
868
869 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
870 src/GLIArchitectureTemplate.py:
871 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
872
873 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
874 Add CDATA support to SimpleXMLParser and add utility functions for it.
875
876 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
877 src/GLIArchitectureTemplate.py:
878 Fix case where vixie-cron is specified as a full package atom, as we still
879 don't want to run 'crontab /etc/crontab' for it.
880
881 *GLI-0.1 (3 Aug 2005)
882
883 30 Jul 2005; Preston Cody <codeman@gentoo.org>
884 add scp to list of is_uri() so GenDialog doesn't complain.
885 fixed livecd-kernel bug in bootloader code.
886 fixed gendialog for dynamic_stage3 instead of "networkless"
887 change bootloader to allow for both initrd and initramfs.
888 fix IP for dynamic_stage3.
889 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
890
891 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
892 Added full scp:// URI support to get_uri() in GLIUtility
893 Remove "networkless" from dynamic stage3 if locic.
894 Remove print statement from scp:// code.
895 Change scp code to check for "assword: " instead of "Password:"
896 Fix post-install network code to create net.eth1+ symlink correctly
897 Check to make sure pkg can be split on / and some debugging code
898 Add 2>dev/null to emerge call in _get_packages_to_emerge()
899 SimpleXMLParser handles True/False/None correctly now
900 Comment out above fix
901 Add partitioning wait-for-device-to-exist code to mount_local_partitions
902
903 28 Jul 2005; Scott Myron <samyron@gentoo.org>
904 Removed a FIXME in the GLIClientConfiguration that is no
905 longer needed.
906
907 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
908 Default to x86 in ClientConfig
909 Typo in build-a-stage3 code.
910 Remove MAKEDEV call in build-a-stage3 postscript.
911
912 26 Jul 2005; Preston Cody <codeman@gentoo.org>
913 Rewrote init of IP for gli-d. Other GenDialog updates.
914 allow network_type to be None in CConfig.
915
916 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
917 Add _dynamic_stage3 option to IP.
918 Add check for that option to dynamic stage3 code in ArchTemplate.
919 Fix code to determine default route in get_eth_info() in GLIUtility.
920 Fix serialization of dns-servers in ClientConfig.
921
922 24 Jul 2005; Preston Cody <codeman@gentoo.org>
923 changed default values of cron/logger in IP.
924 moved GenDialog IP init out to the individual files. gli-dialog's version
925 will change quite a bit.
926
927 22 Jul 2005; Preston Cody <codeman@gentoo.org>
928 added ppcArchTemplate. blank now. working on yaboot.
929 modified ArchTemplate for amd64 and ppc custom kernels.
930 skeleton implementation of _configure_yaboot.
931 small fixes to other templates.
932
933 21 Jul 2005; Preston Cody <codeman@gentoo.org>
934 GenDialog updates. changed comment in IP.
935
936 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
937 src/GLIInstallProfile.py:
938 Fix codeman's screwup of changing the service seperator to ',' in the parser
939 without changing it in the serialization code! Also document this in a
940 comment so you find it easier. Everybody needs to make sure they update
941 their install profiles!
942
943 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
944 src/GLIArchitectureTemplate.py:
945 Fix casting of list to string and concat of None with string, as well as
946 commented prototype of checking that mounting actually worked (found a case
947 where mount can return success, but the mount won't be done).
948
949 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
950 src/templates/x86ArchitectureTemplate.py:
951 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
952 checking for the device, and sleeping 1 second each time.
953
954 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
955 src/templates/x86ArchitectureTemplate.py:
956 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
957 bootloader works again. Also rename _install_{grub,lilo} to
958 _configure_{grub,lilo} since they don't install the loaders anymore
959 themselves.
960
961 7 Jul 2005; Preston Cody <codeman@gentoo.org>
962 fix global USE flags to not include the arch types at the end.
963 updates to GenDialog and gli-d.
964
965 6 Jul 2005; Preston Cody <codeman@gentoo.org>
966 fixing bootloader code for no initrd and initrd->initramfs naming change.
967
968 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
969 Proper comments and parameters to GLIException in install_mta()
970 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
971 Add strip() to list_mirrors(), list_subarch_from_mirror() and
972 list_tarball_from_mirror() to eliminate blank last item.
973
974 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
975 Added stage3 generation code.
976
977 5 Jul 2005; Preston Cody <codeman@gentoo.org>
978 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
979 Mild changes to GenDialog.
980
981 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
982 Remove separate install step configure_rc_conf() since it's handled by
983 update_config_files()
984 Make a copy of newvalues in _edit_config() so quotes aren't added when the
985 function is called twice on the same file.
986
987 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
988 Missing \ in sed in _get_packages_to_emerge()
989 Removed explicit emerging of hotplug and no longer add it to the runlevel.
990 Check in _quickpkg_deps() to ignore blank package names returned from
991 _get_packages_to_emerge()
992
993 28 Jun 2005; Preston Cody <codeman@gentoo.org>
994 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
995 in the dialog.py gauge code.
996
997 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
998 Add code to update_config_files() to go through etc_files and update stuff.
999 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1000 Only use float() in partition xml parsing code if type == "free"
1001
1002 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1003 finished almost all internationalization of GenDialog.
1004 attempt at fixing rc.conf function. moved 3 generate functions out of
1005 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1006 added dialog.py to the fe/dialog directory so it actually gets used.
1007
1008 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1009 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1010
1011 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1012 fix extra entry in list_mirrors()
1013 beginning internationalization runthrough.
1014
1015 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1016 added dialog.py to /src temporarily until it gets accepted upstream.
1017 fix for unused value in form in dialog.py and changed heights.
1018 fix GenDialog forms.
1019
1020 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1021 Changed hostname/domainname for new baselayout.
1022 Changed _add_to_runlevel errors to logs.
1023 Updated TODO list to show status of GenDialog
1024 More updates to GenDialog including two checklists that probably won't work.
1025 update IP to use comma-separated list instead of space separated for services.
1026
1027 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1028 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1029 GenDialog as it gets closer to completion.
1030
1031 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1032 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1033 instead of int() in add_partition_device_partition() for minor (closes 96804)
1034
1035 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1036 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1037 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1038 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1039
1040 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1041 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1042 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1043 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1044 Fix undefined variable 'output' issue in spawn().
1045
1046 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1047 More updates to GenDialog and gli-d.
1048
1049 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1050 Modify list_mirrors() to return a list of mirror URL/name pairs.
1051
1052 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1053 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1054 get subarch.
1055
1056 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1057 Backend partitioning will create disklabel is none exists. Installprofile
1058 defaults to "" now instead of "msdos" for disklabel type. Fix for
1059 mount_local_partitions() to remember device along with minor in the
1060 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1061 add else block to log unsupported netmount types to mount_network_shares()
1062
1063 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1064 src/GLIArchitectureTemplate.py:
1065 Refactor kernel_compile common stuff, fix 2.4 build process.
1066 src/fe/cli/clife.py:
1067 Logging system.
1068 src/GLIUtility.py, src/GLIStorageDevice.py:
1069 Add comments about re-writes needed for boxes without sysfs.
1070
1071 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1072 src/GLIArchitectureTemplate.py:
1073 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1074 'make dep' call for custom compile. build_mode support for prepare-only and
1075 none types completed. custom compile function chains shell functions in
1076 spawned script, to allow for catching all errors.
1077
1078 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1079 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1080 and GenDialog. other gendialog updates as well. kernel updates untested.
1081
1082 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1083 src/GLIInstallProfile.py:
1084 Change structure of etc-portage stuff. The serialization was broken before my
1085 last commit, and I am the only person that's ever used it. The new schema is
1086 as follows:
1087 <etc-portage>
1088 <file name="package.mask"/>
1089 <file name="package.unmask">
1090 <entry atom="sys-kernel/openmosix-sources"/>
1091 </file>
1092 <file name="package.use">
1093 <entry atom="sys-libs/db">
1094 -java
1095 </entry>
1096 <entry atom="dev-libs/cyrus-sasl">
1097 -ldap
1098 </entry>
1099 </file>
1100 </etc-portage>
1101
1102
1103 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1104 src/GLIInstallProfile.py:
1105 Add new entry for gli-profile/kernel-build-method item. Add missing
1106 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1107 keys in the same order.
1108
1109 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1110 src/GLIArchitectureTemplate.py:
1111 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1112 was repeatedly appended to make.conf.
1113
1114 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1115 src/GLIArchitectureTemplate.py:
1116 Put some Linux-2.6 specific code under a if statement. Store list of
1117 successfully mounted swap device for using swapoff. Add proper error checking
1118 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1119 'file'. Clean up some redundant code (thanks to pychecker).'
1120
1121 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1122 Fix typos: get_extended() instead of get_extended_partition(). Added
1123 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1124 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1125
1126 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1127 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1128 in add_network_interface.
1129
1130 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1131 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1132 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1133 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1134 prepare_chroot.
1135
1136 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1137 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1138 +src/fe/installer-gtk:
1139 Add new automated CLI frontend. Add scripts that are the intended means to
1140 use each frontend.
1141
1142 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1143 src/GLIClientController.py:
1144 Add null type to network config, for cases where the interface is already up
1145 and should not be touched (netboot for example).
1146
1147 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1148 src/GLIArchitectureTemplate.py:
1149 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1150 string!. Try to use binary packages if available by default.
1151
1152 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1153 src/GLIArchitectureTemplate.py:
1154 More error checking for _add_to_runlevel, to ensure that the init script
1155 actually exists before we try to add it. set_services phase must take place
1156 after the package installation, otherwise the init scripts might not exist.
1157 Find the correct init script for the cron and logging daemons, and add that
1158 instead of the package atom.
1159
1160 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1161 src/GLIArchitectureTemplate.py:
1162 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1163 usage of 'file' to 'contents' for the variable name, as it shadows
1164 __builtin__.file.
1165
1166 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1167 src/GLIArchitectureTemplate.py:
1168 Add MTA install code, and include MTA install phase. Ensure
1169 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1170 for 'none' kernel config for build_kernel phase. Put kernel_script in
1171 /var/tmp instead of /root for build_kernel phase.
1172
1173 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1174 Rename mta variables to match syslog/cron variables.
1175
1176 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1177 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1178 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1179 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1180 src/templates/.cvsignore, src/tests/.cvsignore:
1181 Refactor partition formatting again to include error checking. Allow 'none'
1182 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1183
1184 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1185 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1186 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1187 only have a single spawn call.
1188
1189 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1190 refixed samyron's fix of set_architecture_template.
1191
1192 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1194 be executable.
1195
1196 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1197 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1198 error checking when you call set_architecture_template.
1199
1200 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1201 moved the mkfsopts input to the partition options menu instead of the during
1202 the creation process. updated GenDialog to say it supports reiserfs v3.
1203
1204 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1205 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1206 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1207 Add support for other partition types to dialogfe.
1208 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1209 avoid integer overflows and wraparounds.
1210
1211 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1212 Removed start/end from XML output and added mkfsopts to partitioning info.
1213 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1214 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1215 in GLIClientConfiguration. Change from .1 and .9 to constants for
1216 partitioning. Fix free space overwriting bug. Remove a few unused functions
1217 from rewrite. Fix call to get_partition_at()
1218
1219 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1220 Updates to GenDialog and dialogfe.
1221
1222 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1223 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1224
1225 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1226 more GenDialog updates to partitioning.
1227
1228 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1229 Indenting issue in GLISD/get_ordered_partition_list.
1230 updates to GenDialog partitioning and added default UTC for timezone in IP.
1231
1232 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 Added GLISD.get_model()
1234
1235 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1236 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1237 More updates to GenDialog :)
1238
1239 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1240 Added get_interface_realname() function.
1241
1242 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1243 Added auto-save of CConfig and copying to new /root after install.
1244 yet even more GenDialog updates.
1245
1246 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1247 removed print statement from GLISD. more updates to GenDialog.
1248
1249 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1250 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1251 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1252 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1253 places in GLIClientConfiguration.
1254
1255 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1256 Fix mount_local_partitions(), configure_fstab(), and
1257 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1258 A few more fixes for templates/x86Archtemplate
1259
1260 27 May 2005; Preston Cody <codeman@gentoo.org>
1261 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1262 a work in progress.
1263
1264 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1265 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1266 directly. GLISD can now handle data imported from XML.
1267
1268 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1269 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1270 handle blank (no disklabel) disks.
1271
1272 20 May 2005; Preston Cody <codeman@gentoo.org>
1273 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1274 up, documented, and separated out serialization and grouped all sections.
1275
1276 19 May 2005; Preston Cody <codeman@gentoo.org>
1277 Reorganization of ClientConfiguration and gutting of unused functions.
1278 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1279
1280 18 May 2005; Preston Cody <codeman@gentoo.org>
1281 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1282
1283 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1285 partitioning. CC serializes install profile to disk and prepare_chroot()
1286 copies it into /mnt/gentoo/root
1287
1288 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 Moved URI parsing into new function parse_uri()
1290
1291 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1292 Added XMLParser module.
1293
1294 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1295 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1296 Minor fix to is_uri() regex to allow hyphens in hostname.
1297
1298 12 May 2005; Preston Cody <codeman@gentoo.org>
1299 Updated finishing_cleanup for new unmounting method from agaffney.
1300
1301 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 Fix GLILogger to use correct time format string. Fix _edit_config() to
1303 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1304 unicode support to is_realstring().
1305
1306 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1307 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1308 return value instead of non-zero. Add code to output a traceback to the
1309 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1310 instead of --nocolor.
1311
1312 10 May 2005; Preston Cody <codeman@gentoo.org>
1313 Added GLIGenDialog.py to make a generic class for the dialog functions that
1314 can be used by both dialogfe and the netfe/be. updated both for new filename.
1315 date changes. 2004->2005.
1316
1317 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 Removed 'quiet=True' from spawn() calls
1319
1320 10 May 2005; Preston Cody <codeman@gentoo.org>
1321 Updated GLIUtility with patches from chotchki. Also added documentation
1322
1323 9 May 2005; Preston Cody <codeman@gentoo.org>
1324 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1325 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1326 from bug #89683, mostly touchups.
1327
1328 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 GLIStorageDevice cleanup patch from bug #91761
1330
1331 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1332 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1333 _edit_config(). Error logging casts 'error' to str
1334
1335 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 Exceptions received in CC are logged before being passed to the FE. Added
1337 code to CC to handle exceptions *not* thrown by the installer itself.
1338
1339 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1340 get_max_mb_for_resize() returns -1 if not self.resizeable
1341
1342 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1343 More dirty rsync hacks :-/
1344
1345 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1346 Patches from chotchki (bug #90325) to improve CC networking. untested.
1347
1348 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1349 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1350 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1351 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1352 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1353 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1354 _get_packages_to_emerge()
1355
1356 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1357 Added group-adding code to set_users in ArchTemplate
1358
1359 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1360 Added post-install script code
1361
1362 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1363 Fixed encapsulation issues in GLIClientController (bug #90141)
1364
1365 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1366 Update resizing code in GLIStorageDevice
1367
1368 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1369 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1370
1371 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1372 Reverted change to ArchTemplate and added support for commented line in old
1373 code.
1374
1375 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1376 Changed _edit_config() to modify value in-place instead of commenting out and
1377 adding the new value to the end of the file.
1378
1379 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1380 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1381 Also updated TODO list.
1382
1383 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 Use blackace's one-liner to add comments for all function for use with
1385 pythondoc.
1386
1387 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Moved 'end >= device_sectors' check out of loop to check for next partition's
1389 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1390 Partitioning code now tracks start/end of extended for placing logicals. End
1391 point of logical is now adjusted along with start.
1392
1393 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1394 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1395 the way of partitioning from a blank disk. Add int() around access to minor
1396 key in partition information due to new partition code leaving them as float.
1397
1398 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1400
1401 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1402 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1403
1404 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1405 Added support for DHCP options and MAC addresses in the InstallProfile.
1406
1407 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1408 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1409 sed to properly strip out junk.
1410
1411 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1412 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1413 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1414
1415 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1416 Fixed indent problem in GLICController
1417
1418 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1419 Check for disklabel type "loop" and use the device name without a minor.
1420
1421 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1422 Remove /tmp/compile_output.log and /var/log/install.log when install is
1423 complete. Added code to (hopefully) keep 2nd thread running after install.
1424 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1425 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1426 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1427
1428 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1429 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1430 when unpacking tarball.
1431
1432 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1433 rewrote filesystem_tools. looks like it works so ripping out all the old
1434 filesystem_tools code.
1435
1436 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1437 Changed the print statements to logging in the partitioning BE code.
1438 the logger may need to be imported to the x86archtemplate. unknown yet.
1439 Added the finishing_cleanup function.
1440 added a fix to the logger from BenUrban
1441
1442 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1443 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1444 URIs. The blank uri check has been commented out.
1445 ripped out error checking of set_services. this is done by _add_to_runlevel.
1446
1447 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1448 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1449
1450 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1451 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1452 the install profile if available. Commented out spawn() debugging prints
1453
1454 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1455 small changes to setup_network_post. moved adding to runlevel of net.x to
1456 after the device gets symlinked. added domainname runlevel command.
1457
1458 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1459 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1460 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1461 spawn() call in livecd-kernel code to pass environment variables.
1462 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1463 the install profile if available.
1464
1465 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1466 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1467 to handle installing the livecd kernel into the new system.
1468
1469 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1470 should emerge hotplug and coldplug before adding them to runlevel.
1471
1472 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1473 took chroot out of grub_install command.
1474
1475 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1476 Changed chroot wrapper code in spawn() to write the wrapper the python way
1477 instead of the bash way to avoid quote conflicts. Added
1478 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1479 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1480 as it breaks the piping.
1481
1482 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1483 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1484
1485 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1486 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1487 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1488 GLIInstallProfile.
1489
1490 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1491 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1492 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1493 into /mnt/gentoo in prepare_chroot()
1494
1495 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1496 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1497 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1498 to start/end sectors
1499
1500 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Add 2>&1 to cmd in spawn()
1502
1503 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1504 Modified GLIUtility.exitsuccess() to work with return value from
1505 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1506 creates wrapper script for commands run inside chroot so multiple commands
1507 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1508 for the generated script from spawn()
1509
1510 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1511 Removed default values for stage tarball URI and portage tree URI from
1512 InstallProfile. These should be set by the FEs. also added services step to
1513 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1514 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1515
1516 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1517 Small fix for setting the default gateway. Also added feature to dialogfe.
1518
1519 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1520 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1521
1522 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1523 Fixed a bunch of true -> True typos. lots of em
1524 only write new resolv.conf if there are dns servers listed.
1525
1526 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1527 Commented out 'display_on_tty8=True' in start_portmap()
1528
1529 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1530 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1531
1532 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1533 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1534 lang parameter to __init__()
1535
1536 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1537 updates to TODO list.
1538
1539 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1540 Initial code for quickpkg GRP support. Fix loop to grab packages from
1541 'emerge -p blah'
1542
1543 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1544 check for dhcp in the network stuff and emerge it if it is.
1545 added quickpkg to TODO list
1546
1547 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1548 Changed the raising of 'warning' exceptions to a simple log of the error
1549 so that the installer can continue.
1550
1551 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1552 Some big changes. First, changed most output to display_on_tty8.
1553 Second, added log lines to all templates. Some smaller fixes such as typos.
1554 Also did some cleanups of old commented lines.
1555
1556 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1557 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1558 Undo change with fix. Escaping fix in GLIStorageDevice.py
1559
1560 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1561 more updates to TODO list. hopefully we'll soon start removing items instead
1562 of adding them.
1563
1564 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1565 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1566
1567 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1568 updated TODO list. (again)
1569
1570 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1571 changed output of portmap start to display_on_tty8.
1572 fixed bootloader for udev and multiple kernels
1573 fixed custom kernel config (again)
1574
1575 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1576 changed default value of CC._enable_ssh to True because this is smart.
1577 added code to allow custom kernel .config. may be unstable and break. sorry.
1578
1579 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1580 partition() now waits until after it checks for partition flags before delete
1581 the partitions :P
1582
1583 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1584 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1585 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1586 blank.
1587
1588 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1589 Various fixes related to the add_users function. Still not yet finished.
1590 Added things to the TODO list. Lets start using that!
1591
1592 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1593 Added code to x86Template to format newly created partitions. Also added
1594 some error checking code. GLIStorageDevice passes 'minor' with data to
1595 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1596 mounting code.
1597
1598 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1599 Took out unnecessary setting of random livecd root password. the cd already
1600 sets it randomly.
1601
1602 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1603 Took out an unneeded step from CC's run()
1604
1605 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1606 Attempt at detecting and adding windows partitions to lilo.
1607
1608 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1609 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1610 partition. fixed misc exit_status => exitstatus typo.
1611
1612 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1613 Added basic code for resizing filesystems with pyparted. Fixed code for
1614 resizing ntfs and ext2/3.
1615
1616 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1617 Fixed partition() in x86Template so that it scans through logicals and deletes
1618 before deleting containing extended partition. Also clears partition table to
1619 be safe before third pass.
1620
1621 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1622 Added mount_network_shares. not able to test it from this computer.
1623 will test when i get back to school.
1624 also added start_portmap to the client_controller as an always-do.
1625 agaffney says this is needed for NFS mounts to work.
1626
1627 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1628 Partial rewrite of partitioning code in x86Template. No longer shells out to
1629 parted to perform actions, now uses all pyparted calls. Code "works" in a
1630 test, but still needs lots of TLC. Also modified tests/install.py to work
1631 with x86Template and GLIClientConfiguration.
1632
1633 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1634 Initial move of partitioning code from ArchTemplate to x86Template.
1635
1636 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1637 Added grp_install and services to InstallProfile. forgot about the set_root_password
1638
1639 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1640 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1641 Test Install ran very well (skipping partitioning).
1642
1643 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1644 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1645 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1646 some may still have eluded me.
1647
1648 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1649 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1650 Just finished mount_local_partitions in GLIArchitectureTemplate
1651
1652 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1653 Added get_num_sectors() to GLIStorageDevice.
1654
1655 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1656 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1657 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1658 from GLIInstallProfile.
1659
1660 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1661 GLIStorageDevice returns "unknown" instead of "" for get_type()
1662
1663 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1664 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1665 actually work. Commented out resizability checking code for speed.
1666
1667 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1668 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1669 GLIStorageDevice at the suggestion of plors
1670
1671 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1672 Added a function to GLIUtility to pull a value from a make.conf-style config
1673 file. Minor type fix to GLIInstallProfile.py
1674
1675 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1676 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1677 network mounts from partition data structure in GLIInstallProfile
1678
1679 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1680 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1681 can be resized.
1682
1683 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1684 Added some of the final functions to GLIInstallTemplate.
1685 Yes this project is still active despite rare use of the Changelog!
1686
1687 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1688 Added the GLIPartitionTools.py file. This is a temporary insertion of
1689 partitioning tools that will eventually go into their own package.
1690
1691 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1692 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1693 for the program). Added __init__(install_profile, client_configuration) to
1694 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1695 to avoid constantly passing stuff every time we call a method.
1696
1697 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1698
1699 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1700 files without messing up all the other stuff in them. This will be used for making
1701 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1702
1703 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1704
1705 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1706 have a few basic things. I added two private methods. One is _depends(). This
1707 will be used for dependency checking (ie. unpacking a tarball requires that
1708 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1709 same syntax as os.system(), however, instead of being run in the liveCD
1710 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1711 isolated the code. Hope to work more this week to get this class formed...
1712
1713 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1714
1715 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1716 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1717 to allow for easier modification (mutable, rather than immutable objects). Updated
1718 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1719 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1720 Added initial unit test code.
1721
1722 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1723
1724 Added initial changelog. Setting up the basic structure of the CVS repository
1725 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1726 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20