/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1350 - (show annotations) (download)
Tue Mar 7 00:40:18 2006 UTC (8 years, 4 months ago) by agaffney
File size: 71428 byte(s)
  src/GLIArchitectureTemplate.py:
  only install filesystem tools for partitions with a mountpoint

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.615 2006/03/07 00:40:17 agaffney Exp $
5
6 7 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/templates/x86ArchitectureTemplate.py:
8 bootloader and partitioning external commands log to compile_output.log
9 wait for device node to exist before resizing
10 add -v to ntfsresize command
11 src/GLIStorageDevice.py:
12 return start/end with ip structure
13 pad min ntfs size by 50 MB just to be safe
14 src/GLIArchitectureTemplate.py:
15 only install filesystem tools for partitions with a mountpoint
16
17 5 Mar 2006; Preston Cody <codeman@gentoo.org>
18 add error catching and text to saving profile dialogs
19
20 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
21 src/GLIPortage.py:
22 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
23 src/templates/x86ArchitectureTemplate.py:
24 fix checks for changed partitions so they will actually get deleted
25
26 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
27 src/GLIClientController.py:
28 slightly better error handling for pre-install failures
29
30 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
31 src/templates/x86ArchitectureTemplate.py:
32 proper return code checking for ext2/3 resizing
33
34 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
35 src/GLIClientController.py:
36 accept 'none' as well as 'null' for network type
37 src/GLIArchitectureTemplate.py:
38 ignore extended partitions in mount_local_partitions()
39 src/templates/x86ArchitectureTemplate.py:
40 use get_ordered_partition_list() instead of keys().sort() for new_part_list
41 check to make sure start sector for primary isn't less than end sector for
42 previous extended
43 src/GLIClientController.py:
44 write dns servers to /etc/resolv.conf
45
46 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47 src/GLIPortage.py:
48 copy_pkg_to_chroot() uses compile_output.log for command output
49
50 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
51 only keep a 1000 line 'scrollback' buffer for the compile output and log file
52
53 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
54 src/GLIPortage.py:
55 add code make GLIPortage.py capable of being run stand-along for dynamic
56 stage3 generation and copying packages in a GRP-ish way
57 grp code fixups
58
59 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIPortage.py:
61 ignore blank packages passed to get_deps() and emerge()
62
63 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
64 src/GLIUtility.py:
65 add get_chosts() function
66
67 *GLI-0.3 (12 Feb 2006)
68
69 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
70 src/templates/x86ArchitectureTemplate.py:
71 pull old start/end sector values from somewhere that actually has them
72 add logic for extended partition to code that makes sure new end sector
73 doesn't overlap start sector of next partitions
74 don't freak out if partition can't be deleted
75
76 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
77 src/GLIPortage.py:
78 run env-update at the end of copy_pkg_to_chroot()
79
80 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
81 src/templates/x86ArchitectureTemplate.py:
82 I'm a complete fscking dumbass. I recorded the end sector for partitions that
83 weren't being touched, but I never used it when recreating them...the end was
84 calculated from the size in MB instead :/
85
86 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
87 src/GLIArchitectureTemplate.py:
88 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
89 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
90 src/GLIPortage.py:
91 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
92 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
93 'resized' flag
94
95 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
96 src/GLIPortage.py:
97 short circuit and check vdb directly if package begins with '='
98
99 8 Feb 2006; Preston Cody <codeman@gentoo.org>
100 added more packages to extra_packages list in IP
101
102 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
103 src/templates/x86ArchitectureTemplate.py:
104 10 tries to create filesystem instead of 3
105 src/GLIPortage, src/GLIArchitectureTemplate.py:
106 ignore_missing flag for copy_pkg_to_chroot()
107
108 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
109 src/GLIPortage.py:
110 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
111
112 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
113 src/net/server/gliserv.py:
114 fix handling of 404 for real files
115 src/net/server/GLIServerProfile.py:
116 look for 'hostname' in attributes instead of 'name'
117
118 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/SimpleXMLParser.py:
120 initial support for 'include' in XML files
121 src/GLIStorageDevice.py:
122 initial support for %
123 src/GLIClientController.py:
124 add debugging statements to pre-install steps
125
126 15 Jan 2006; Preston Cody <codeman@gentoo.org>
127 webgli/configfiles:
128 check for key in etc_files['rc.conf'] to fix key error
129 webgli/timezone: small fix.
130 webgli/extrapackages: list-type fix
131 webgli/services: same
132 glimd: add/edit_client updates.
133
134 12 Jan 2006; Preston Cody <codeman@gentoo.org>
135 added configure.pyhtml to glimd. minor changes
136 to top and add_client. fixed up showargs.
137 added execute.pyhtml
138 changed register clients line in gliserv for name->hostname.
139 updated TODO.
140
141 10 Jan 2006; Preston Cody <codeman@gentoo.org>
142 src/net/server/*:
143 added add/del/edit client/profile.pythml for glimd.
144 updated templates, showclients, and gliserv.
145
146 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
147 src/net/server/*:
148 stupid threading module...
149
150 8 Jan 2006; Preston Cody <codeman@gentoo.org>
151 AT: rc.conf -> conf.d/clock
152
153 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
154 src/GLIPortage.py:
155 show 'Calculating dependencies for ...' in subprogress bar at beginning of
156 emerge()
157 src/GLIArchitectureTemplate.py:
158 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
159 in the chroot
160 remove _quickpkg_deps() and _portage_best_{visible,version}()
161 src/GLIUtility.py:
162 fail immediately in validate_uri() if provided URI can't be parsed
163 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
164 debug code in spawn()
165 use lower-level os.read() instead of file.read() because python sucks
166 src/templates/x86ArchitectureTemplate.py:
167 basic subprogress reporting for partitioning
168 total_steps was 1 too high
169
170 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
171 src/GLIUtility.py:
172 move parse_vdb_contents() to GLIPortage
173 src/GLIPortage.py:
174 remove all symlink fixups
175 ignore 'dir' entries in CONTENTS
176 call tar with -p
177
178 5 Jan 2006; Preston Cody <codeman@gentoo.org>
179 AT: bootsplash is now gensplash
180 gliserv: add advanced_mode to shared_info
181 webgli: Added advanced mode. mostly just disables a few screens.
182
183 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIPortage.py:
185 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
186 added emerge()
187 update sub-progress after each package is emerged
188 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
189 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
190 remove link if it exists before moving content into place
191 src/GLIArchitectureTemplate.py:
192 install_packages() now calls emerge() in GLIPortage
193 change all calls to self._emerge() to self._portage.emerge()
194 comment out all emerge status checking...using exceptions now
195 call copy_pkg_to_chroot() directly for livecd-kernel
196
197 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIArchitectureTemplate.py:
199 remove add_pkg_to_world() and copy_pkg_to_chroot()
200 copy installer.log to installer.log.failed on install failure
201 src/GLIUtility.py:
202 added get_keymaps()
203 spawn() takes any False argument for chroot instead of just None
204 src/GLIPortage.py:
205 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
206 change copy_pkg_to_chroot() to work properly with use_root=False
207 figure PORTAGE_TMPDIR properly
208
209 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/net/server/html/*:
211 converted showclients, load/saveprofile
212
213 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIPortage.py:
215 exclude packages already in chroot vdb from binary deplist
216 chroot to use best_version for chroot's vdb
217 src/runtimedeps.py:
218 accept ROOT via commandline instead of env
219
220 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
221 src/runtimedeps.py:
222 remove passing of ROOT
223 src/GLIPortage.py:
224 modify get_deps() to get deptree for each package and merge into final list
225 remove depgraph class
226 add debugging code to get_deps()
227 src/GLIArchitectureTemplate.py:
228 combine code for GRP/compile in install_packages() into one block
229 debugging code in install_packages()
230
231 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
232 src/runtimedeps.py:
233 initial commit
234 src/GLIPortage.py:
235 use separate script for GRP deps
236 remove calls to portage module
237
238 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
239 src/GLIPortage.py:
240 initial commit
241 move some of portage function from GLIAT
242 flipped around a few function args
243 src/GLIArchitectureTemplate.py:
244 revamp install_packages() for new GLIPortage
245
246 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
247 src/GLIArchitectureTemplate.py:
248 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
249
250 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
251 src/net/server/gliserv.py:
252 wrap generated code in a class to isolate it a bit better
253 302 redirects work
254 don't use cgi.escape() for <% %>
255 src/net/server/html/webgli/*:
256 load/save profile
257 src/GLIUtility.py:
258 change /sbin/lspci to just lspci
259
260 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
261 src/GLIClientController.py:
262 change ordering of statements in CC run() while loop to not go past the end
263 of the array
264 src/GLIArchitectureTemplate.py:
265 removed redundant bind mounts
266
267 18 Dec 2005; Preston Cody <codeman@gentoo.org>
268 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
269 added a diagram by blackace from last night.
270 added the glossary in RTF format.
271
272 17 Dec 2005; Preston Cody <codeman@gentoo.org>
273 x86AT: separated out emerge/configure from running of bootloader
274 added MBR drive support to lilo.
275 these changes will likely not work.
276 AT: added setup_and_run_bootloader step.
277
278 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
279 src/net/server/gliserv.py:
280 call generated code in a function
281 src/net/server/html/webgli/*:
282 include top/bottom
283 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
284 src/GLIClientCongifuration.py:
285 install mode magic
286
287 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
288 src/GLIClientController.py:
289 use GLIException when there's an import problem
290 added debug code to show install_steps
291 src/templates/amd64ArchitectureTemplate.py:
292 add . to import path
293 proper path this time: ../../templates
294 src/GLIArchitectureTemplate.py:
295 add _portage_best_version() function
296
297 11 Dec 2005; Preston Cody <codeman@gentoo.org>
298 added initial glossary and gimli diagram to the docs directory.
299 modify gli-dialog to allow editing of the install_profile after loading XML.
300
301 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
302 src/net/server/html/webgli/:
303 converted globaluse, localuse, networkmounts, portagetree, and stageselection
304 moved saveclientconfig stuff into clientconfig
305 moved saveconfigfiles into config files
306 converted etc_portage and makedotconf
307 converted bootloader and kernel
308 convert daemons, extrapackages, networking, review, services, timezone, users
309 src/net/server/gliserv.py:
310 proper 404 handling for .pyhtml extension
311 HTML escape <% %> stuff
312 work around python's sucky regexes
313 src/GLIInstallProfile.py:
314 allow set_{rsync,ftp,http}_proxy() to accept empty values
315
316 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
317 src/net/server/gliserv.py:
318 initial commit of Legolas templating engine
319 302 redirects
320 src/net/server/html/index.html, src/net/server/webgli_template.html:
321 minor changes for new code
322 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
323 initial commit of the conversion from the monolithic WebGLIHandler.py to the
324 one file per path Legolas goodness
325 partitioning[2-4] done
326
327 5 Dec 2005; Preston Cody <codeman@gentoo.org>
328 webgli: dhcp options in CC and post-install.
329 updated comparison chart.
330 webgli: etc/portage/* and distcc support added. not too-well tested.
331
332 4 Dec 2005; Preston Cody <codeman@gentoo.org>
333 webgli_template.html: valign=top on left side.
334 webgli: fix bootloader boot_device. now working.
335 webgli: CC proxy done. post-install proxy in progress.
336
337 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
338 src/net/server/webgli_template.html:
339 increase padding for content cell to 7px and add colspan=2
340
341 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
342 webgli: added graphic bar on top
343 webgli: added hover effects on the links on the left
344 webgli: re-rendered header_bg.png to stretch without artifacts
345
346 3 Dec 2005; Preston Cody <codeman@gentoo.org>
347 webgli: make.conf disabling fixes for dynamic_stage3
348 fixed portage snapshot browse popup
349 all changes tested.
350 webgli: add debug mode to CC screen. the screen still needs lots of work.
351
352 1 Dec 2005; Preston Cody <codeman@gentoo.org>
353 added debug mode question to gli-dialog
354 added CC proxies to CC networking for gli-dialog
355 webgli: fixed skip CC networking if connection active
356 webgli: portage snapshot defaults to CD
357 webgli: bootloader mbr drive selection
358 webgli: USE flags unselectable if dynamic_stage3
359 webgli: manual extra packages and save button.
360
361 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
362 src/GLIUtility.py:
363 change ping count to 2
364 docs/comparison.html
365 initial commit
366
367 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368 src/templates/x86ArchitectureTemplate.py:
369 fix map() issue with grub code
370 replace kernel_names and initrd_names loops with one-liners
371
372 27 Nov 2005; Preston Cody <codeman@gentoo.org>
373 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
374 initial gli-dialog support for recommended partitioning layout and clear.
375 failure cleanup now an option for gli-dialog.
376 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
377 added comparison list and updated TODO!
378
379 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
380 src/GLIArchitectureTemplate.py:
381 fix to stage1() debug code
382 fix to stage2() debug code
383
384 26 Nov 2005; Preston Cody <codeman@gentoo.org>
385 some more bootloader code fixes. forgot boot_device != mbr_device.
386
387 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
388 src/GLIStorageDevice.py:
389 fix to unallocated space merging when last one is after part 4
390
391 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIArchitectureTemplate.py:
393 small fix to debugging code in copy_pkg_to_chroot()
394
395 23 Nov 2005; Preston Cody <codeman@gentoo.org>
396 more bugfixes with bootloader code
397 gli-dialog side appears to work
398
399 21 Nov 2005; Preston Cody <codeman@gentoo.org>
400 initial adding of boot_device to backend.
401 initial boot_device support added to gli-dialog.
402 some fixes of my poor coding
403
404 20 Nov 2005; Preston Cody <codeman@gentoo.org>
405 converted gli-dialog to use the install_package_list.
406 gtkfe has already been converted by AllanonJL
407 new way working in gli-dialog now and added to webgli.
408 added set/get_boot_device() to IP
409
410 19 Nov 2005; Preston Cody <codeman@gentoo.org>
411 get_install_package_list added to InstallProfile. This can be used by the FEs
412
413 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/templates/x86ArchitectureTemplate.py:
415 call ls with '-1 --color=no'
416
417 16 Nov 2005; Preston Cody <codeman@gentoo.org>
418 added warning (#9) to GRP ppl about stage3 tarballs
419
420 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
421 src/GLIArchitectureTemplate.py:
422 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
423 confused
424
425 13 Nov 2005; Preston Cody <codeman@gentoo.org>
426 removed protocols from rc.conf screens
427 finished initial rc.conf and make.conf in webgli
428
429 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
430 src/net/server/gliserv.py:
431 add -h option to usage()
432 show time and request URI in debug mode
433 show client IP in debug mode
434 just use IP instead of trying to do a reverse lookup
435
436 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
437 src/net/server/gliserv.py:
438 'classier' 401 message
439 proper commandline parsing
440 help via -h
441 user/pass can be specificed via commandline option
442
443 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
444 src/net/server/gliserv.py:
445 basic HTTP auth
446
447 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
448 src/net/server/gliserv.py:
449 dynamic module reloading (yipee!)
450 send 'Last-Modified' header for real files
451 respond to HEAD with just headers
452 src/net/server/handlers/WebGLIHandler.py:
453 icons for drives
454
455 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
456 src/net/server/handlers/WebGLIHandler.py:
457 initial 'pretty' partition table display support
458 clicking partition in 'pretty' display works instead of radio buttons
459 radio buttons and pretty display work together
460 META redirect instead of javascript
461 pretty display stretches across entire screen
462 'Recommended layout' and 'Clear drive' functions
463 properly catch exceptions from do_recommended()
464 src/GLIArchitectureTemplate.py:
465 replace preinst, copy, postinst, rm steps with qmerge
466 whoops...that shouldn't have been commented out
467 create image_dir with -p in copy_pkg_to_chroot()
468 more generic of symlink crappiness
469 new copy_pkg_to_chroot() actually works now
470
471 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
472 src/GLIStorageDevice.py:
473 initial generic disk support
474 fixes for add_partition() code
475 src/net/server/handlers/WebGLIHandler.py:
476 added support for creating generic disks
477 add new partition working
478 save and delete partitions
479
480 6 Nov 2005; Preston Cody <codeman@gentoo.org>
481 webgli: Partitioning making progress.
482
483 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
484 src/GLIArchitectureTemplate.py:
485 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
486 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
487 dir) and works around /etc/gconf symlink problem
488
489 5 Nov 2005; Preston Cody <codeman@gentoo.org>
490 webgli: lots of updates. preliminary partitioning. extra packages works.
491
492 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
493 src/net/server/gliserv.py:
494 httpd now supports HTTPS and falls back to HTTP if not available
495 make fallback actually work
496 src/net/server/SecureXMLRPCServer.py:
497 SecureSocketServer is now threaded
498
499 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
500 src/net/client/gliclient.py:
501 try to use HTTPS for XMLRPC first and fallback to HTTP
502 pretend mode
503 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
504 HTTPS XMLRPC goodness from samyron
505 pass name of certificate
506
507 31 Oct 2005; Preston Cody <codeman@gentoo.org>
508 wegli: daemons and services screens done.
509
510 30 Oct 2005; Preston Cody <codeman@gentoo.org>
511 webgli: networking and users screens
512 added return_redirect to handler.py
513 loading and saving install/client profiles works for webgli now
514 Review also done
515
516 *GLI-0.2 (27 Oct 2005)
517
518 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
519 src/templates/x86ArchitectureTemplate.py:
520 properly check for bootloader emerge exist status with exitsuccess()
521 log output of grub install command
522 add --batch --no-floppy to grub command
523 grubinstallstring only gets logged if debug is on
524 src/GLIUtility.py:
525 update progress bar to 100% when process finishes
526
527 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
528 src/GLIClientController.py:
529 added debugging code for the interaction between the 2 threads via Event()
530 src/GLIUtility.py:
531 doubled the buffer size in spawn()
532 bump buffer size up to 16384
533 only report progress in 5% increments
534 src/GLIArchitectureTemplate.py:
535 kernelpkgs.txt support code
536 above disabled because it sucks
537 added add_pkg_to_world()
538
539 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540 src/GLIArchitectureTemplate.py:
541 use tar | tar to copy files in copy_pkg_to_chroot()
542 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
543
544 23 Oct 2005; Preston Cody <codeman@gentoo.org>
545 DEBUGGING ADDED TO AT. verbose field added to CConfig.
546
547 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
548 src/net/server/gliserv.py:
549 / maps to index.html
550 look for actual files in html/
551 src/net/html:
552 new template
553 src/GLIUtility.py:
554 added parse_vdb_contents()
555 src/GLIArchitectureTemplate.py:
556 added copy_pkg_to_chroot()
557 added debug code to dynamic-stage3
558 switch dynamic-stage3 to new method
559 lots of bug fixes from adding debug code
560
561 22 Oct 2005; Preston Cody <codeman@gentoo.org>
562 webgli initial bootloader support + changed make.conf.
563 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
564
565 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
566 src/GLIUtility.py:
567 horrible tangled mess of code that is tarball unpacking subprogress display
568 add unpack progress to portage snapshot
569 use read() instead of readlines() in spawn()
570 only update progress bar for whole percents
571
572 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
573 src/templates/x86ArchitectureTemplate.py:
574 change call to 'grub' to use GLIUtility.exitsuccess()
575 add definition of 'build_mode' in _configure_lilo()
576 src/misc/updategtkfe, src/misc/updateglid:
577 fix so subshell is called in root shell
578
579 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
580 src/net/server/handlers/WebGLIHandler.py:
581 stage screen launches URI browser in sized window with various properties set
582
583 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
584 src/misc/updategtkfe:
585 updated to actually work
586 remove previous snapshot and extracted dir before downloading
587 src/misc/updateglid:
588 updated to actually work
589 src/templates/x86ArchitectureTemplate.py:
590 fixed bug where grub code was looking for 'root+root+file_name2'
591
592 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
593 src/net/server/handlers/WebGLIHandler.py:
594 URI browser
595 added mirror selection
596 src/GLIUtility.py:
597 ls via ssh strips off ending *
598
599 16 Oct 2005; Preston Cody <codeman@gentoo.org>
600 more updates to webgli. stage selection.
601
602 11 Oct 2005; Preston Cody <codeman@gentoo.org>
603 updated webgli with preliminary Network Mounts support.
604
605 9 Oct 2005; Preston Cody <codeman@gentoo.org>
606 GenDialog: string formatting and yes/no label fixes.
607 added WebGLI template for gliserv.py
608 added WebGLIHandler as well as a definition for it in gliserv.py
609 updates to the webgli files even though they won't be there for long.
610 Utility: remove exception for non-existant grppkgs.txt until the new livecd
611 goes public.
612
613 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
614 src/net/server/gliserv.py:
615 override dict to not be so anal
616 main server now loads separate module to handle requests
617 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
618 split out profile URLs into separate handler function
619 move handlers into subdirectory
620 add Welcome and Clients handlers
621
622 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
623 src/GLIUtility.py:
624 raise exception if password prompt received twice
625
626 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
627 src/GLIUtility.py:
628 removed rot13ify()
629
630 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
631 src/net/server/gliserv.py:
632 allow for param to be passed multiple times in GET
633 no XMLRPC functions return None
634 modify POST request parsing to only create a list if needed
635 fix GET request parsing so the list creation for multiple values works
636 src/net/client/gliclient.py:
637 various typo and type mismatch fixes
638 exit after exception
639
640 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
641 src/net/client/gliclient.py:
642 initial commit
643 pass MAC to XMLRPC functions
644 src/net/server/GLIServerProfile.py:
645 rename GLIClientsProfiles to GLIServerProfile
646
647 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
648 src/net/server/gliserv.py:
649 now handles POST requests
650 move majority of request handling code to common_handler() to reduce code
651 duplication
652 profile loading
653 client reg via XMLRPC goes into SharedInfo()
654 /showclients redesign
655 template fixes
656 allow handler functions to add/change headers
657 save profile
658
659 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
660 src/net/server/GLIClientsProfiles.py:
661 initial commit
662 src/net/server/template.html:
663 initial commit
664 src/net/server/gliserv.py:
665 add template mojo
666
667 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
668 src/net/server/gliserv.py:
669 XMLRPC mojo
670
671 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
672 src/GLIArchitectureTemplate.py:
673 add code in _edit_config() to comment line where variable is defined
674 previously
675 insert new line under previous definition of variable if it exists
676 small _edit_config() cleanup
677 src/GLIStorageDevice.py:
678 add clear_partitions() function
679 new sizes for recommended partition layout
680 automatically calculate swap size for recommended layout
681
682 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
683 src/templates/x86ArchitectureTemplate.py:
684 fat16 mojo
685
686 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
687 src/GLIStorageDevice.py:
688 prevent do_recommended() from being run twice
689 rewrite do_recommended() to be more robust
690 src/GLIArchitectureTemplate.py:
691 rework _edit_config() to not write duplicate entries
692
693 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
694 src/GLIStorageDevice.py:
695 added do_recommended() function to automatically created 256M/1G/* layout
696
697 17 Sep 2005; Preston Cody <codeman@gentoo.org>
698 src/gli-dialog.py: added set_distcc to the list
699 GenDialog: added set_distcc. untested.
700 IP: added install_distcc flag.
701 AT: added install_distcc function based on the flag. runs after build_kernel
702 changed AT spawn command for distcc for nodeps.
703
704 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
705 src/GLIUtility.py:
706 add rot13ify() function
707
708 16 Sep 2005; Preston Cody <codeman@gentoo.org>
709 src/GenDialog.py
710 added a sentence of text. unchecking support added.
711
712 15 Sep 2005; Preston Cody <codeman@gentoo.org>
713 src/GLIUtility.py
714 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
715 src/GenDialog.py
716 still working on extra_packages. transformed the list to new format.
717 added GRP indication to list. untested.
718 TODO lists updated.
719 src/fe/dialog/gli-dialog.py
720 spelling mistook.
721
722 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
723 src/GLIUtility.py:
724 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
725
726 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
727 src/GLIUtility.py:
728 add get_directory_listing_from_uri()
729 add http support to above
730 add ftp support to above
731 add scp support to above
732 src/GLIArchitectureTemplate.py:
733 "0" instead of 0 for key of single-element dict passed to _edit_config()
734
735 5 Sep 2005; Preston Cody <codeman@gentoo.org>
736 value_only -> only_value
737
738 3 Sep 2005; Preston Cody <codeman@gentoo.org>
739 gutted out all of etc_portage structure since it is now all handled by
740 etc_files
741
742 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
743 src/GLIArchitectureTemplate.py:
744 install_packages() sends progress update notifications
745 src/templates/x86ArchitectureTemplate.py:
746 increase sleep to 5s between format tries
747 src/GLIClientController.py:
748 pass 'self' to AT instead of 'self._pretend'
749
750 2 Sep 2005; Preston Cody <codeman@gentoo.org>
751 logger -> logger.log in x86AT
752
753 1 Sep 2005; Preston Cody <codeman@gentoo.org>
754 added set_etc_portage to IP. debugging gli-d's support for it.
755
756 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
757 src/templates/x86ArchitectureTemplate.py:
758 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
759
760 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761 src/GLIArchitectureTemplate.py:
762 add _portage_best_version() function and rework install_packages() to allow
763 for future X of Y tracking
764 Use best_visible instead of best_version
765 tracked down and fixed missing = causing empty install extra packages
766 use = when emerging also
767 quickpkg hokey pokey
768 run _get_packages_to_emerge() again with -pk
769
770 22 Aug 2005; Preston Cody <codeman@gentoo.org>
771 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
772 the end of install_packages.
773 added updateglid to /src/misc
774 updated all core files with new GPL notice and copyright statement.
775
776 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
777 src/GLIUtility.py:
778 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
779 a snapshot in /mnt/cdrom/snapshots/
780 get_snapshot_from_cd() adds file:// at the beginning
781 change calls to extra package special case functions to 'self.blah'
782
783 21 Aug 2005; Preston Cody <codeman@gentoo.org>
784 src/ArchTemplate: changed "voodoo".
785 changed order of portage sync methods. made a fallback to webrsync if
786 normal emerge sync fails.
787 removed get_sources_from_cd because it is obsolete.
788 add special cases to install_packages. remove fatal exception on package
789 install failure b/c the box will still be bootable.
790 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
791 handled in the FEs.
792 src/GenDialog: added a bunch of code for dealing with x11-based packages.
793 awaiting testing.
794
795 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
796 src/GLIStorageDevice.py:
797 global try/except block around fs resizable detection code
798 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
799 install-failed cleanup function
800
801 18 Aug 2005; Preston Cody <codeman@gentoo.org>
802 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
803
804 16 Aug 2005; Preston Cody <codeman@gentoo.org>
805 GLIGenDialog:
806 add drive choices for loaded configs.
807 force snapshot for dynamic_stage3
808 init the snapshoturi input to the cd snapshot if not already selected.
809 if dynamic_stage3, skip the make.conf step.
810 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
811 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
812
813 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
814 src/GLIArchitectureTemplate.py:
815 manually call MAKEDEV in stage3-dynamic code
816 copy /etc/inittab.old to /etc/inittab in chroot
817 src/GLIUtility.py:
818 add beginning of validate_uri() function
819 add file:/// support to validate_uri()
820 single quotes when setting livecd password
821
822 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
823 src/GLIGenDialog.py:
824 change getmountpoint() to get_mountpoint()
825 src/misc/updategtkfe:
826 committed script to automatically download latest snapshot and run gtkfe
827 src/templates/x86ArchitectureTemplate.py:
828 fix _configure_lilo_add_windows() for IP -> GLISD stuff
829 src/GLIArchitectureTemplate.py:
830 give tmp_minor an initial value in mount_local_partitions so that the value
831 remain from the previous drive
832
833 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
834 src/templates/x86ArchitectureTemplate.py:
835 Fix _configure_lilo() for IP using GLISD stuff
836 src/GLIArchitectureTemplate.py:
837 install_cron_daemon() treats "none" specially
838
839 14 Aug 2005; Preston Cody <codeman@gentoo.org>
840 old patch from Steven Mertens to resolve bug #96642
841 numerous asthetic changes to GenDialog, no real functionality changes though.
842 strings renamed for global use if necessary.
843 fix all three parts of bug 102291
844 disable set_etc_portage until fully-written.
845
846 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
847 src/GLIClientController.py:
848 lower-case http/ftp proxy envvars
849
850 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
851 src/GLIClientController.py:
852 log end of pre_install steps to aid in debugging
853 src/templates/x86ArchitectureTemplate.py:
854 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
855
856 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
857 src/GLIArchitectureTemplate.py
858 check to make sure that the device node we're wait for to exist isn't of
859 type 'free'
860
861 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
862 src/GLIGenDialog.py:
863 convert install_packages to list in set_extra_packages()
864 check return code of checklist() call in "Manual" section
865 *actually* fix the first problem
866
867 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
868 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
869 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
870
871 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
872 src/GLIArchitectureTemplate.py:
873 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
874
875 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
876 Add CDATA support to SimpleXMLParser and add utility functions for it.
877
878 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
879 src/GLIArchitectureTemplate.py:
880 Fix case where vixie-cron is specified as a full package atom, as we still
881 don't want to run 'crontab /etc/crontab' for it.
882
883 *GLI-0.1 (3 Aug 2005)
884
885 30 Jul 2005; Preston Cody <codeman@gentoo.org>
886 add scp to list of is_uri() so GenDialog doesn't complain.
887 fixed livecd-kernel bug in bootloader code.
888 fixed gendialog for dynamic_stage3 instead of "networkless"
889 change bootloader to allow for both initrd and initramfs.
890 fix IP for dynamic_stage3.
891 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
892
893 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
894 Added full scp:// URI support to get_uri() in GLIUtility
895 Remove "networkless" from dynamic stage3 if locic.
896 Remove print statement from scp:// code.
897 Change scp code to check for "assword: " instead of "Password:"
898 Fix post-install network code to create net.eth1+ symlink correctly
899 Check to make sure pkg can be split on / and some debugging code
900 Add 2>dev/null to emerge call in _get_packages_to_emerge()
901 SimpleXMLParser handles True/False/None correctly now
902 Comment out above fix
903 Add partitioning wait-for-device-to-exist code to mount_local_partitions
904
905 28 Jul 2005; Scott Myron <samyron@gentoo.org>
906 Removed a FIXME in the GLIClientConfiguration that is no
907 longer needed.
908
909 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
910 Default to x86 in ClientConfig
911 Typo in build-a-stage3 code.
912 Remove MAKEDEV call in build-a-stage3 postscript.
913
914 26 Jul 2005; Preston Cody <codeman@gentoo.org>
915 Rewrote init of IP for gli-d. Other GenDialog updates.
916 allow network_type to be None in CConfig.
917
918 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
919 Add _dynamic_stage3 option to IP.
920 Add check for that option to dynamic stage3 code in ArchTemplate.
921 Fix code to determine default route in get_eth_info() in GLIUtility.
922 Fix serialization of dns-servers in ClientConfig.
923
924 24 Jul 2005; Preston Cody <codeman@gentoo.org>
925 changed default values of cron/logger in IP.
926 moved GenDialog IP init out to the individual files. gli-dialog's version
927 will change quite a bit.
928
929 22 Jul 2005; Preston Cody <codeman@gentoo.org>
930 added ppcArchTemplate. blank now. working on yaboot.
931 modified ArchTemplate for amd64 and ppc custom kernels.
932 skeleton implementation of _configure_yaboot.
933 small fixes to other templates.
934
935 21 Jul 2005; Preston Cody <codeman@gentoo.org>
936 GenDialog updates. changed comment in IP.
937
938 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
939 src/GLIInstallProfile.py:
940 Fix codeman's screwup of changing the service seperator to ',' in the parser
941 without changing it in the serialization code! Also document this in a
942 comment so you find it easier. Everybody needs to make sure they update
943 their install profiles!
944
945 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
946 src/GLIArchitectureTemplate.py:
947 Fix casting of list to string and concat of None with string, as well as
948 commented prototype of checking that mounting actually worked (found a case
949 where mount can return success, but the mount won't be done).
950
951 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
952 src/templates/x86ArchitectureTemplate.py:
953 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
954 checking for the device, and sleeping 1 second each time.
955
956 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
957 src/templates/x86ArchitectureTemplate.py:
958 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
959 bootloader works again. Also rename _install_{grub,lilo} to
960 _configure_{grub,lilo} since they don't install the loaders anymore
961 themselves.
962
963 7 Jul 2005; Preston Cody <codeman@gentoo.org>
964 fix global USE flags to not include the arch types at the end.
965 updates to GenDialog and gli-d.
966
967 6 Jul 2005; Preston Cody <codeman@gentoo.org>
968 fixing bootloader code for no initrd and initrd->initramfs naming change.
969
970 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
971 Proper comments and parameters to GLIException in install_mta()
972 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
973 Add strip() to list_mirrors(), list_subarch_from_mirror() and
974 list_tarball_from_mirror() to eliminate blank last item.
975
976 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
977 Added stage3 generation code.
978
979 5 Jul 2005; Preston Cody <codeman@gentoo.org>
980 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
981 Mild changes to GenDialog.
982
983 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
984 Remove separate install step configure_rc_conf() since it's handled by
985 update_config_files()
986 Make a copy of newvalues in _edit_config() so quotes aren't added when the
987 function is called twice on the same file.
988
989 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990 Missing \ in sed in _get_packages_to_emerge()
991 Removed explicit emerging of hotplug and no longer add it to the runlevel.
992 Check in _quickpkg_deps() to ignore blank package names returned from
993 _get_packages_to_emerge()
994
995 28 Jun 2005; Preston Cody <codeman@gentoo.org>
996 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
997 in the dialog.py gauge code.
998
999 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1000 Add code to update_config_files() to go through etc_files and update stuff.
1001 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1002 Only use float() in partition xml parsing code if type == "free"
1003
1004 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1005 finished almost all internationalization of GenDialog.
1006 attempt at fixing rc.conf function. moved 3 generate functions out of
1007 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1008 added dialog.py to the fe/dialog directory so it actually gets used.
1009
1010 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1011 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1012
1013 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1014 fix extra entry in list_mirrors()
1015 beginning internationalization runthrough.
1016
1017 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1018 added dialog.py to /src temporarily until it gets accepted upstream.
1019 fix for unused value in form in dialog.py and changed heights.
1020 fix GenDialog forms.
1021
1022 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1023 Changed hostname/domainname for new baselayout.
1024 Changed _add_to_runlevel errors to logs.
1025 Updated TODO list to show status of GenDialog
1026 More updates to GenDialog including two checklists that probably won't work.
1027 update IP to use comma-separated list instead of space separated for services.
1028
1029 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1030 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1031 GenDialog as it gets closer to completion.
1032
1033 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1034 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1035 instead of int() in add_partition_device_partition() for minor (closes 96804)
1036
1037 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1038 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1039 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1040 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1041
1042 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1043 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1044 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1045 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1046 Fix undefined variable 'output' issue in spawn().
1047
1048 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1049 More updates to GenDialog and gli-d.
1050
1051 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1052 Modify list_mirrors() to return a list of mirror URL/name pairs.
1053
1054 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1055 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1056 get subarch.
1057
1058 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1059 Backend partitioning will create disklabel is none exists. Installprofile
1060 defaults to "" now instead of "msdos" for disklabel type. Fix for
1061 mount_local_partitions() to remember device along with minor in the
1062 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1063 add else block to log unsupported netmount types to mount_network_shares()
1064
1065 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1066 src/GLIArchitectureTemplate.py:
1067 Refactor kernel_compile common stuff, fix 2.4 build process.
1068 src/fe/cli/clife.py:
1069 Logging system.
1070 src/GLIUtility.py, src/GLIStorageDevice.py:
1071 Add comments about re-writes needed for boxes without sysfs.
1072
1073 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1074 src/GLIArchitectureTemplate.py:
1075 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1076 'make dep' call for custom compile. build_mode support for prepare-only and
1077 none types completed. custom compile function chains shell functions in
1078 spawned script, to allow for catching all errors.
1079
1080 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1081 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1082 and GenDialog. other gendialog updates as well. kernel updates untested.
1083
1084 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1085 src/GLIInstallProfile.py:
1086 Change structure of etc-portage stuff. The serialization was broken before my
1087 last commit, and I am the only person that's ever used it. The new schema is
1088 as follows:
1089 <etc-portage>
1090 <file name="package.mask"/>
1091 <file name="package.unmask">
1092 <entry atom="sys-kernel/openmosix-sources"/>
1093 </file>
1094 <file name="package.use">
1095 <entry atom="sys-libs/db">
1096 -java
1097 </entry>
1098 <entry atom="dev-libs/cyrus-sasl">
1099 -ldap
1100 </entry>
1101 </file>
1102 </etc-portage>
1103
1104
1105 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1106 src/GLIInstallProfile.py:
1107 Add new entry for gli-profile/kernel-build-method item. Add missing
1108 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1109 keys in the same order.
1110
1111 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1112 src/GLIArchitectureTemplate.py:
1113 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1114 was repeatedly appended to make.conf.
1115
1116 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1117 src/GLIArchitectureTemplate.py:
1118 Put some Linux-2.6 specific code under a if statement. Store list of
1119 successfully mounted swap device for using swapoff. Add proper error checking
1120 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1121 'file'. Clean up some redundant code (thanks to pychecker).'
1122
1123 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1124 Fix typos: get_extended() instead of get_extended_partition(). Added
1125 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1126 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1127
1128 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1129 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1130 in add_network_interface.
1131
1132 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1133 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1134 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1135 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1136 prepare_chroot.
1137
1138 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1139 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1140 +src/fe/installer-gtk:
1141 Add new automated CLI frontend. Add scripts that are the intended means to
1142 use each frontend.
1143
1144 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1145 src/GLIClientController.py:
1146 Add null type to network config, for cases where the interface is already up
1147 and should not be touched (netboot for example).
1148
1149 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1150 src/GLIArchitectureTemplate.py:
1151 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1152 string!. Try to use binary packages if available by default.
1153
1154 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1155 src/GLIArchitectureTemplate.py:
1156 More error checking for _add_to_runlevel, to ensure that the init script
1157 actually exists before we try to add it. set_services phase must take place
1158 after the package installation, otherwise the init scripts might not exist.
1159 Find the correct init script for the cron and logging daemons, and add that
1160 instead of the package atom.
1161
1162 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 src/GLIArchitectureTemplate.py:
1164 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1165 usage of 'file' to 'contents' for the variable name, as it shadows
1166 __builtin__.file.
1167
1168 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1169 src/GLIArchitectureTemplate.py:
1170 Add MTA install code, and include MTA install phase. Ensure
1171 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1172 for 'none' kernel config for build_kernel phase. Put kernel_script in
1173 /var/tmp instead of /root for build_kernel phase.
1174
1175 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1176 Rename mta variables to match syslog/cron variables.
1177
1178 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1179 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1180 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1181 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1182 src/templates/.cvsignore, src/tests/.cvsignore:
1183 Refactor partition formatting again to include error checking. Allow 'none'
1184 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1185
1186 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1187 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1188 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1189 only have a single spawn call.
1190
1191 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1192 refixed samyron's fix of set_architecture_template.
1193
1194 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1195 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1196 be executable.
1197
1198 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1199 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1200 error checking when you call set_architecture_template.
1201
1202 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1203 moved the mkfsopts input to the partition options menu instead of the during
1204 the creation process. updated GenDialog to say it supports reiserfs v3.
1205
1206 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1207 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1208 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1209 Add support for other partition types to dialogfe.
1210 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1211 avoid integer overflows and wraparounds.
1212
1213 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Removed start/end from XML output and added mkfsopts to partitioning info.
1215 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1216 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1217 in GLIClientConfiguration. Change from .1 and .9 to constants for
1218 partitioning. Fix free space overwriting bug. Remove a few unused functions
1219 from rewrite. Fix call to get_partition_at()
1220
1221 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1222 Updates to GenDialog and dialogfe.
1223
1224 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1225 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1226
1227 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1228 more GenDialog updates to partitioning.
1229
1230 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1231 Indenting issue in GLISD/get_ordered_partition_list.
1232 updates to GenDialog partitioning and added default UTC for timezone in IP.
1233
1234 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1235 Added GLISD.get_model()
1236
1237 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1238 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1239 More updates to GenDialog :)
1240
1241 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 Added get_interface_realname() function.
1243
1244 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1245 Added auto-save of CConfig and copying to new /root after install.
1246 yet even more GenDialog updates.
1247
1248 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1249 removed print statement from GLISD. more updates to GenDialog.
1250
1251 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1252 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1253 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1254 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1255 places in GLIClientConfiguration.
1256
1257 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1258 Fix mount_local_partitions(), configure_fstab(), and
1259 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1260 A few more fixes for templates/x86Archtemplate
1261
1262 27 May 2005; Preston Cody <codeman@gentoo.org>
1263 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1264 a work in progress.
1265
1266 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1267 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1268 directly. GLISD can now handle data imported from XML.
1269
1270 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1271 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1272 handle blank (no disklabel) disks.
1273
1274 20 May 2005; Preston Cody <codeman@gentoo.org>
1275 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1276 up, documented, and separated out serialization and grouped all sections.
1277
1278 19 May 2005; Preston Cody <codeman@gentoo.org>
1279 Reorganization of ClientConfiguration and gutting of unused functions.
1280 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1281
1282 18 May 2005; Preston Cody <codeman@gentoo.org>
1283 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1284
1285 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1286 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1287 partitioning. CC serializes install profile to disk and prepare_chroot()
1288 copies it into /mnt/gentoo/root
1289
1290 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Moved URI parsing into new function parse_uri()
1292
1293 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1294 Added XMLParser module.
1295
1296 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1297 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1298 Minor fix to is_uri() regex to allow hyphens in hostname.
1299
1300 12 May 2005; Preston Cody <codeman@gentoo.org>
1301 Updated finishing_cleanup for new unmounting method from agaffney.
1302
1303 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Fix GLILogger to use correct time format string. Fix _edit_config() to
1305 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1306 unicode support to is_realstring().
1307
1308 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1310 return value instead of non-zero. Add code to output a traceback to the
1311 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1312 instead of --nocolor.
1313
1314 10 May 2005; Preston Cody <codeman@gentoo.org>
1315 Added GLIGenDialog.py to make a generic class for the dialog functions that
1316 can be used by both dialogfe and the netfe/be. updated both for new filename.
1317 date changes. 2004->2005.
1318
1319 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1320 Removed 'quiet=True' from spawn() calls
1321
1322 10 May 2005; Preston Cody <codeman@gentoo.org>
1323 Updated GLIUtility with patches from chotchki. Also added documentation
1324
1325 9 May 2005; Preston Cody <codeman@gentoo.org>
1326 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1327 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1328 from bug #89683, mostly touchups.
1329
1330 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1331 GLIStorageDevice cleanup patch from bug #91761
1332
1333 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1334 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1335 _edit_config(). Error logging casts 'error' to str
1336
1337 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1338 Exceptions received in CC are logged before being passed to the FE. Added
1339 code to CC to handle exceptions *not* thrown by the installer itself.
1340
1341 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 get_max_mb_for_resize() returns -1 if not self.resizeable
1343
1344 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1345 More dirty rsync hacks :-/
1346
1347 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1348 Patches from chotchki (bug #90325) to improve CC networking. untested.
1349
1350 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1352 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1353 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1354 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1355 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1356 _get_packages_to_emerge()
1357
1358 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1359 Added group-adding code to set_users in ArchTemplate
1360
1361 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 Added post-install script code
1363
1364 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1365 Fixed encapsulation issues in GLIClientController (bug #90141)
1366
1367 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1368 Update resizing code in GLIStorageDevice
1369
1370 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1371 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1372
1373 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Reverted change to ArchTemplate and added support for commented line in old
1375 code.
1376
1377 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Changed _edit_config() to modify value in-place instead of commenting out and
1379 adding the new value to the end of the file.
1380
1381 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1382 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1383 Also updated TODO list.
1384
1385 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1386 Use blackace's one-liner to add comments for all function for use with
1387 pythondoc.
1388
1389 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Moved 'end >= device_sectors' check out of loop to check for next partition's
1391 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1392 Partitioning code now tracks start/end of extended for placing logicals. End
1393 point of logical is now adjusted along with start.
1394
1395 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1396 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1397 the way of partitioning from a blank disk. Add int() around access to minor
1398 key in partition information due to new partition code leaving them as float.
1399
1400 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1401 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1402
1403 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1404 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1405
1406 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1407 Added support for DHCP options and MAC addresses in the InstallProfile.
1408
1409 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1410 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1411 sed to properly strip out junk.
1412
1413 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1414 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1415 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1416
1417 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1418 Fixed indent problem in GLICController
1419
1420 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1421 Check for disklabel type "loop" and use the device name without a minor.
1422
1423 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1424 Remove /tmp/compile_output.log and /var/log/install.log when install is
1425 complete. Added code to (hopefully) keep 2nd thread running after install.
1426 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1427 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1428 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1429
1430 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1431 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1432 when unpacking tarball.
1433
1434 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1435 rewrote filesystem_tools. looks like it works so ripping out all the old
1436 filesystem_tools code.
1437
1438 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1439 Changed the print statements to logging in the partitioning BE code.
1440 the logger may need to be imported to the x86archtemplate. unknown yet.
1441 Added the finishing_cleanup function.
1442 added a fix to the logger from BenUrban
1443
1444 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1445 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1446 URIs. The blank uri check has been commented out.
1447 ripped out error checking of set_services. this is done by _add_to_runlevel.
1448
1449 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1450 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1451
1452 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1453 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1454 the install profile if available. Commented out spawn() debugging prints
1455
1456 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1457 small changes to setup_network_post. moved adding to runlevel of net.x to
1458 after the device gets symlinked. added domainname runlevel command.
1459
1460 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1461 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1462 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1463 spawn() call in livecd-kernel code to pass environment variables.
1464 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1465 the install profile if available.
1466
1467 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1468 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1469 to handle installing the livecd kernel into the new system.
1470
1471 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1472 should emerge hotplug and coldplug before adding them to runlevel.
1473
1474 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1475 took chroot out of grub_install command.
1476
1477 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1478 Changed chroot wrapper code in spawn() to write the wrapper the python way
1479 instead of the bash way to avoid quote conflicts. Added
1480 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1481 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1482 as it breaks the piping.
1483
1484 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1485 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1486
1487 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1488 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1489 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1490 GLIInstallProfile.
1491
1492 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1493 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1494 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1495 into /mnt/gentoo in prepare_chroot()
1496
1497 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1498 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1499 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1500 to start/end sectors
1501
1502 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1503 Add 2>&1 to cmd in spawn()
1504
1505 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 Modified GLIUtility.exitsuccess() to work with return value from
1507 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1508 creates wrapper script for commands run inside chroot so multiple commands
1509 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1510 for the generated script from spawn()
1511
1512 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1513 Removed default values for stage tarball URI and portage tree URI from
1514 InstallProfile. These should be set by the FEs. also added services step to
1515 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1516 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1517
1518 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1519 Small fix for setting the default gateway. Also added feature to dialogfe.
1520
1521 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1522 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1523
1524 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1525 Fixed a bunch of true -> True typos. lots of em
1526 only write new resolv.conf if there are dns servers listed.
1527
1528 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1529 Commented out 'display_on_tty8=True' in start_portmap()
1530
1531 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1532 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1533
1534 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1535 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1536 lang parameter to __init__()
1537
1538 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1539 updates to TODO list.
1540
1541 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1542 Initial code for quickpkg GRP support. Fix loop to grab packages from
1543 'emerge -p blah'
1544
1545 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1546 check for dhcp in the network stuff and emerge it if it is.
1547 added quickpkg to TODO list
1548
1549 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1550 Changed the raising of 'warning' exceptions to a simple log of the error
1551 so that the installer can continue.
1552
1553 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1554 Some big changes. First, changed most output to display_on_tty8.
1555 Second, added log lines to all templates. Some smaller fixes such as typos.
1556 Also did some cleanups of old commented lines.
1557
1558 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1559 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1560 Undo change with fix. Escaping fix in GLIStorageDevice.py
1561
1562 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1563 more updates to TODO list. hopefully we'll soon start removing items instead
1564 of adding them.
1565
1566 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1567 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1568
1569 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1570 updated TODO list. (again)
1571
1572 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1573 changed output of portmap start to display_on_tty8.
1574 fixed bootloader for udev and multiple kernels
1575 fixed custom kernel config (again)
1576
1577 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1578 changed default value of CC._enable_ssh to True because this is smart.
1579 added code to allow custom kernel .config. may be unstable and break. sorry.
1580
1581 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1582 partition() now waits until after it checks for partition flags before delete
1583 the partitions :P
1584
1585 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1586 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1587 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1588 blank.
1589
1590 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1591 Various fixes related to the add_users function. Still not yet finished.
1592 Added things to the TODO list. Lets start using that!
1593
1594 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1595 Added code to x86Template to format newly created partitions. Also added
1596 some error checking code. GLIStorageDevice passes 'minor' with data to
1597 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1598 mounting code.
1599
1600 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1601 Took out unnecessary setting of random livecd root password. the cd already
1602 sets it randomly.
1603
1604 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1605 Took out an unneeded step from CC's run()
1606
1607 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1608 Attempt at detecting and adding windows partitions to lilo.
1609
1610 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1611 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1612 partition. fixed misc exit_status => exitstatus typo.
1613
1614 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1615 Added basic code for resizing filesystems with pyparted. Fixed code for
1616 resizing ntfs and ext2/3.
1617
1618 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1619 Fixed partition() in x86Template so that it scans through logicals and deletes
1620 before deleting containing extended partition. Also clears partition table to
1621 be safe before third pass.
1622
1623 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1624 Added mount_network_shares. not able to test it from this computer.
1625 will test when i get back to school.
1626 also added start_portmap to the client_controller as an always-do.
1627 agaffney says this is needed for NFS mounts to work.
1628
1629 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1630 Partial rewrite of partitioning code in x86Template. No longer shells out to
1631 parted to perform actions, now uses all pyparted calls. Code "works" in a
1632 test, but still needs lots of TLC. Also modified tests/install.py to work
1633 with x86Template and GLIClientConfiguration.
1634
1635 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1636 Initial move of partitioning code from ArchTemplate to x86Template.
1637
1638 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1639 Added grp_install and services to InstallProfile. forgot about the set_root_password
1640
1641 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1642 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1643 Test Install ran very well (skipping partitioning).
1644
1645 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1646 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1647 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1648 some may still have eluded me.
1649
1650 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1651 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1652 Just finished mount_local_partitions in GLIArchitectureTemplate
1653
1654 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1655 Added get_num_sectors() to GLIStorageDevice.
1656
1657 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1658 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1659 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1660 from GLIInstallProfile.
1661
1662 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1663 GLIStorageDevice returns "unknown" instead of "" for get_type()
1664
1665 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1666 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1667 actually work. Commented out resizability checking code for speed.
1668
1669 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1670 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1671 GLIStorageDevice at the suggestion of plors
1672
1673 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1674 Added a function to GLIUtility to pull a value from a make.conf-style config
1675 file. Minor type fix to GLIInstallProfile.py
1676
1677 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1678 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1679 network mounts from partition data structure in GLIInstallProfile
1680
1681 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1682 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1683 can be resized.
1684
1685 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1686 Added some of the final functions to GLIInstallTemplate.
1687 Yes this project is still active despite rare use of the Changelog!
1688
1689 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1690 Added the GLIPartitionTools.py file. This is a temporary insertion of
1691 partitioning tools that will eventually go into their own package.
1692
1693 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1694 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1695 for the program). Added __init__(install_profile, client_configuration) to
1696 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1697 to avoid constantly passing stuff every time we call a method.
1698
1699 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1700
1701 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1702 files without messing up all the other stuff in them. This will be used for making
1703 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1704
1705 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1706
1707 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1708 have a few basic things. I added two private methods. One is _depends(). This
1709 will be used for dependency checking (ie. unpacking a tarball requires that
1710 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1711 same syntax as os.system(), however, instead of being run in the liveCD
1712 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1713 isolated the code. Hope to work more this week to get this class formed...
1714
1715 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1716
1717 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1718 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1719 to allow for easier modification (mutable, rather than immutable objects). Updated
1720 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1721 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1722 Added initial unit test code.
1723
1724 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1725
1726 Added initial changelog. Setting up the basic structure of the CVS repository
1727 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1728 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20