/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1360 - (show annotations) (download)
Fri Mar 10 23:37:45 2006 UTC (8 years, 5 months ago) by agaffney
File size: 71842 byte(s)
  src/GLIStorageDevice.py:
  raise an exception if the existing partitions are out of disk order

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.618 2006/03/10 23:37:45 agaffney Exp $
5
6 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIStorageDevice.py:
8 raise an exception if the existing partitions are out of disk order
9
10 8 Mar 2006; Preston Cody <codeman@gentoo.org>
11 src/fe/dialog/gli-dialog and src/GLIGenDialog:
12 added networkless mode to gli-dialog.
13
14 6 Mar 2006; Preston Cody <codeman@gentoo.org>
15 src/templates/x86AT:
16 add windows detection code for grub. untested.
17
18 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/templates/x86ArchitectureTemplate.py:
20 bootloader and partitioning external commands log to compile_output.log
21 wait for device node to exist before resizing
22 add -v to ntfsresize command
23 src/GLIStorageDevice.py:
24 return start/end with ip structure
25 pad min ntfs size by 50 MB just to be safe
26 src/GLIArchitectureTemplate.py:
27 only install filesystem tools for partitions with a mountpoint
28
29 5 Mar 2006; Preston Cody <codeman@gentoo.org>
30 add error catching and text to saving profile dialogs
31
32 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
33 src/GLIPortage.py:
34 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
35 src/templates/x86ArchitectureTemplate.py:
36 fix checks for changed partitions so they will actually get deleted
37
38 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
39 src/GLIClientController.py:
40 slightly better error handling for pre-install failures
41
42 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
43 src/templates/x86ArchitectureTemplate.py:
44 proper return code checking for ext2/3 resizing
45
46 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
47 src/GLIClientController.py:
48 accept 'none' as well as 'null' for network type
49 src/GLIArchitectureTemplate.py:
50 ignore extended partitions in mount_local_partitions()
51 src/templates/x86ArchitectureTemplate.py:
52 use get_ordered_partition_list() instead of keys().sort() for new_part_list
53 check to make sure start sector for primary isn't less than end sector for
54 previous extended
55 src/GLIClientController.py:
56 write dns servers to /etc/resolv.conf
57
58 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
59 src/GLIPortage.py:
60 copy_pkg_to_chroot() uses compile_output.log for command output
61
62 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
63 only keep a 1000 line 'scrollback' buffer for the compile output and log file
64
65 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
66 src/GLIPortage.py:
67 add code make GLIPortage.py capable of being run stand-along for dynamic
68 stage3 generation and copying packages in a GRP-ish way
69 grp code fixups
70
71 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/GLIPortage.py:
73 ignore blank packages passed to get_deps() and emerge()
74
75 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/GLIUtility.py:
77 add get_chosts() function
78
79 *GLI-0.3 (12 Feb 2006)
80
81 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
82 src/templates/x86ArchitectureTemplate.py:
83 pull old start/end sector values from somewhere that actually has them
84 add logic for extended partition to code that makes sure new end sector
85 doesn't overlap start sector of next partitions
86 don't freak out if partition can't be deleted
87
88 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
89 src/GLIPortage.py:
90 run env-update at the end of copy_pkg_to_chroot()
91
92 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
93 src/templates/x86ArchitectureTemplate.py:
94 I'm a complete fscking dumbass. I recorded the end sector for partitions that
95 weren't being touched, but I never used it when recreating them...the end was
96 calculated from the size in MB instead :/
97
98 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIArchitectureTemplate.py:
100 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
101 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
102 src/GLIPortage.py:
103 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
104 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
105 'resized' flag
106
107 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
108 src/GLIPortage.py:
109 short circuit and check vdb directly if package begins with '='
110
111 8 Feb 2006; Preston Cody <codeman@gentoo.org>
112 added more packages to extra_packages list in IP
113
114 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/templates/x86ArchitectureTemplate.py:
116 10 tries to create filesystem instead of 3
117 src/GLIPortage, src/GLIArchitectureTemplate.py:
118 ignore_missing flag for copy_pkg_to_chroot()
119
120 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
121 src/GLIPortage.py:
122 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
123
124 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/net/server/gliserv.py:
126 fix handling of 404 for real files
127 src/net/server/GLIServerProfile.py:
128 look for 'hostname' in attributes instead of 'name'
129
130 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
131 src/SimpleXMLParser.py:
132 initial support for 'include' in XML files
133 src/GLIStorageDevice.py:
134 initial support for %
135 src/GLIClientController.py:
136 add debugging statements to pre-install steps
137
138 15 Jan 2006; Preston Cody <codeman@gentoo.org>
139 webgli/configfiles:
140 check for key in etc_files['rc.conf'] to fix key error
141 webgli/timezone: small fix.
142 webgli/extrapackages: list-type fix
143 webgli/services: same
144 glimd: add/edit_client updates.
145
146 12 Jan 2006; Preston Cody <codeman@gentoo.org>
147 added configure.pyhtml to glimd. minor changes
148 to top and add_client. fixed up showargs.
149 added execute.pyhtml
150 changed register clients line in gliserv for name->hostname.
151 updated TODO.
152
153 10 Jan 2006; Preston Cody <codeman@gentoo.org>
154 src/net/server/*:
155 added add/del/edit client/profile.pythml for glimd.
156 updated templates, showclients, and gliserv.
157
158 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
159 src/net/server/*:
160 stupid threading module...
161
162 8 Jan 2006; Preston Cody <codeman@gentoo.org>
163 AT: rc.conf -> conf.d/clock
164
165 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIPortage.py:
167 show 'Calculating dependencies for ...' in subprogress bar at beginning of
168 emerge()
169 src/GLIArchitectureTemplate.py:
170 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
171 in the chroot
172 remove _quickpkg_deps() and _portage_best_{visible,version}()
173 src/GLIUtility.py:
174 fail immediately in validate_uri() if provided URI can't be parsed
175 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
176 debug code in spawn()
177 use lower-level os.read() instead of file.read() because python sucks
178 src/templates/x86ArchitectureTemplate.py:
179 basic subprogress reporting for partitioning
180 total_steps was 1 too high
181
182 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
183 src/GLIUtility.py:
184 move parse_vdb_contents() to GLIPortage
185 src/GLIPortage.py:
186 remove all symlink fixups
187 ignore 'dir' entries in CONTENTS
188 call tar with -p
189
190 5 Jan 2006; Preston Cody <codeman@gentoo.org>
191 AT: bootsplash is now gensplash
192 gliserv: add advanced_mode to shared_info
193 webgli: Added advanced mode. mostly just disables a few screens.
194
195 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
196 src/GLIPortage.py:
197 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
198 added emerge()
199 update sub-progress after each package is emerged
200 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
201 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
202 remove link if it exists before moving content into place
203 src/GLIArchitectureTemplate.py:
204 install_packages() now calls emerge() in GLIPortage
205 change all calls to self._emerge() to self._portage.emerge()
206 comment out all emerge status checking...using exceptions now
207 call copy_pkg_to_chroot() directly for livecd-kernel
208
209 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIArchitectureTemplate.py:
211 remove add_pkg_to_world() and copy_pkg_to_chroot()
212 copy installer.log to installer.log.failed on install failure
213 src/GLIUtility.py:
214 added get_keymaps()
215 spawn() takes any False argument for chroot instead of just None
216 src/GLIPortage.py:
217 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
218 change copy_pkg_to_chroot() to work properly with use_root=False
219 figure PORTAGE_TMPDIR properly
220
221 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
222 src/net/server/html/*:
223 converted showclients, load/saveprofile
224
225 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
226 src/GLIPortage.py:
227 exclude packages already in chroot vdb from binary deplist
228 chroot to use best_version for chroot's vdb
229 src/runtimedeps.py:
230 accept ROOT via commandline instead of env
231
232 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
233 src/runtimedeps.py:
234 remove passing of ROOT
235 src/GLIPortage.py:
236 modify get_deps() to get deptree for each package and merge into final list
237 remove depgraph class
238 add debugging code to get_deps()
239 src/GLIArchitectureTemplate.py:
240 combine code for GRP/compile in install_packages() into one block
241 debugging code in install_packages()
242
243 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
244 src/runtimedeps.py:
245 initial commit
246 src/GLIPortage.py:
247 use separate script for GRP deps
248 remove calls to portage module
249
250 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
251 src/GLIPortage.py:
252 initial commit
253 move some of portage function from GLIAT
254 flipped around a few function args
255 src/GLIArchitectureTemplate.py:
256 revamp install_packages() for new GLIPortage
257
258 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
259 src/GLIArchitectureTemplate.py:
260 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
261
262 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
263 src/net/server/gliserv.py:
264 wrap generated code in a class to isolate it a bit better
265 302 redirects work
266 don't use cgi.escape() for <% %>
267 src/net/server/html/webgli/*:
268 load/save profile
269 src/GLIUtility.py:
270 change /sbin/lspci to just lspci
271
272 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
273 src/GLIClientController.py:
274 change ordering of statements in CC run() while loop to not go past the end
275 of the array
276 src/GLIArchitectureTemplate.py:
277 removed redundant bind mounts
278
279 18 Dec 2005; Preston Cody <codeman@gentoo.org>
280 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
281 added a diagram by blackace from last night.
282 added the glossary in RTF format.
283
284 17 Dec 2005; Preston Cody <codeman@gentoo.org>
285 x86AT: separated out emerge/configure from running of bootloader
286 added MBR drive support to lilo.
287 these changes will likely not work.
288 AT: added setup_and_run_bootloader step.
289
290 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
291 src/net/server/gliserv.py:
292 call generated code in a function
293 src/net/server/html/webgli/*:
294 include top/bottom
295 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
296 src/GLIClientCongifuration.py:
297 install mode magic
298
299 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
300 src/GLIClientController.py:
301 use GLIException when there's an import problem
302 added debug code to show install_steps
303 src/templates/amd64ArchitectureTemplate.py:
304 add . to import path
305 proper path this time: ../../templates
306 src/GLIArchitectureTemplate.py:
307 add _portage_best_version() function
308
309 11 Dec 2005; Preston Cody <codeman@gentoo.org>
310 added initial glossary and gimli diagram to the docs directory.
311 modify gli-dialog to allow editing of the install_profile after loading XML.
312
313 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
314 src/net/server/html/webgli/:
315 converted globaluse, localuse, networkmounts, portagetree, and stageselection
316 moved saveclientconfig stuff into clientconfig
317 moved saveconfigfiles into config files
318 converted etc_portage and makedotconf
319 converted bootloader and kernel
320 convert daemons, extrapackages, networking, review, services, timezone, users
321 src/net/server/gliserv.py:
322 proper 404 handling for .pyhtml extension
323 HTML escape <% %> stuff
324 work around python's sucky regexes
325 src/GLIInstallProfile.py:
326 allow set_{rsync,ftp,http}_proxy() to accept empty values
327
328 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
329 src/net/server/gliserv.py:
330 initial commit of Legolas templating engine
331 302 redirects
332 src/net/server/html/index.html, src/net/server/webgli_template.html:
333 minor changes for new code
334 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
335 initial commit of the conversion from the monolithic WebGLIHandler.py to the
336 one file per path Legolas goodness
337 partitioning[2-4] done
338
339 5 Dec 2005; Preston Cody <codeman@gentoo.org>
340 webgli: dhcp options in CC and post-install.
341 updated comparison chart.
342 webgli: etc/portage/* and distcc support added. not too-well tested.
343
344 4 Dec 2005; Preston Cody <codeman@gentoo.org>
345 webgli_template.html: valign=top on left side.
346 webgli: fix bootloader boot_device. now working.
347 webgli: CC proxy done. post-install proxy in progress.
348
349 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
350 src/net/server/webgli_template.html:
351 increase padding for content cell to 7px and add colspan=2
352
353 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
354 webgli: added graphic bar on top
355 webgli: added hover effects on the links on the left
356 webgli: re-rendered header_bg.png to stretch without artifacts
357
358 3 Dec 2005; Preston Cody <codeman@gentoo.org>
359 webgli: make.conf disabling fixes for dynamic_stage3
360 fixed portage snapshot browse popup
361 all changes tested.
362 webgli: add debug mode to CC screen. the screen still needs lots of work.
363
364 1 Dec 2005; Preston Cody <codeman@gentoo.org>
365 added debug mode question to gli-dialog
366 added CC proxies to CC networking for gli-dialog
367 webgli: fixed skip CC networking if connection active
368 webgli: portage snapshot defaults to CD
369 webgli: bootloader mbr drive selection
370 webgli: USE flags unselectable if dynamic_stage3
371 webgli: manual extra packages and save button.
372
373 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
374 src/GLIUtility.py:
375 change ping count to 2
376 docs/comparison.html
377 initial commit
378
379 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
380 src/templates/x86ArchitectureTemplate.py:
381 fix map() issue with grub code
382 replace kernel_names and initrd_names loops with one-liners
383
384 27 Nov 2005; Preston Cody <codeman@gentoo.org>
385 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
386 initial gli-dialog support for recommended partitioning layout and clear.
387 failure cleanup now an option for gli-dialog.
388 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
389 added comparison list and updated TODO!
390
391 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIArchitectureTemplate.py:
393 fix to stage1() debug code
394 fix to stage2() debug code
395
396 26 Nov 2005; Preston Cody <codeman@gentoo.org>
397 some more bootloader code fixes. forgot boot_device != mbr_device.
398
399 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/GLIStorageDevice.py:
401 fix to unallocated space merging when last one is after part 4
402
403 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
404 src/GLIArchitectureTemplate.py:
405 small fix to debugging code in copy_pkg_to_chroot()
406
407 23 Nov 2005; Preston Cody <codeman@gentoo.org>
408 more bugfixes with bootloader code
409 gli-dialog side appears to work
410
411 21 Nov 2005; Preston Cody <codeman@gentoo.org>
412 initial adding of boot_device to backend.
413 initial boot_device support added to gli-dialog.
414 some fixes of my poor coding
415
416 20 Nov 2005; Preston Cody <codeman@gentoo.org>
417 converted gli-dialog to use the install_package_list.
418 gtkfe has already been converted by AllanonJL
419 new way working in gli-dialog now and added to webgli.
420 added set/get_boot_device() to IP
421
422 19 Nov 2005; Preston Cody <codeman@gentoo.org>
423 get_install_package_list added to InstallProfile. This can be used by the FEs
424
425 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
426 src/templates/x86ArchitectureTemplate.py:
427 call ls with '-1 --color=no'
428
429 16 Nov 2005; Preston Cody <codeman@gentoo.org>
430 added warning (#9) to GRP ppl about stage3 tarballs
431
432 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
433 src/GLIArchitectureTemplate.py:
434 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
435 confused
436
437 13 Nov 2005; Preston Cody <codeman@gentoo.org>
438 removed protocols from rc.conf screens
439 finished initial rc.conf and make.conf in webgli
440
441 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
442 src/net/server/gliserv.py:
443 add -h option to usage()
444 show time and request URI in debug mode
445 show client IP in debug mode
446 just use IP instead of trying to do a reverse lookup
447
448 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
449 src/net/server/gliserv.py:
450 'classier' 401 message
451 proper commandline parsing
452 help via -h
453 user/pass can be specificed via commandline option
454
455 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
456 src/net/server/gliserv.py:
457 basic HTTP auth
458
459 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
460 src/net/server/gliserv.py:
461 dynamic module reloading (yipee!)
462 send 'Last-Modified' header for real files
463 respond to HEAD with just headers
464 src/net/server/handlers/WebGLIHandler.py:
465 icons for drives
466
467 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
468 src/net/server/handlers/WebGLIHandler.py:
469 initial 'pretty' partition table display support
470 clicking partition in 'pretty' display works instead of radio buttons
471 radio buttons and pretty display work together
472 META redirect instead of javascript
473 pretty display stretches across entire screen
474 'Recommended layout' and 'Clear drive' functions
475 properly catch exceptions from do_recommended()
476 src/GLIArchitectureTemplate.py:
477 replace preinst, copy, postinst, rm steps with qmerge
478 whoops...that shouldn't have been commented out
479 create image_dir with -p in copy_pkg_to_chroot()
480 more generic of symlink crappiness
481 new copy_pkg_to_chroot() actually works now
482
483 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
484 src/GLIStorageDevice.py:
485 initial generic disk support
486 fixes for add_partition() code
487 src/net/server/handlers/WebGLIHandler.py:
488 added support for creating generic disks
489 add new partition working
490 save and delete partitions
491
492 6 Nov 2005; Preston Cody <codeman@gentoo.org>
493 webgli: Partitioning making progress.
494
495 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
496 src/GLIArchitectureTemplate.py:
497 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
498 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
499 dir) and works around /etc/gconf symlink problem
500
501 5 Nov 2005; Preston Cody <codeman@gentoo.org>
502 webgli: lots of updates. preliminary partitioning. extra packages works.
503
504 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
505 src/net/server/gliserv.py:
506 httpd now supports HTTPS and falls back to HTTP if not available
507 make fallback actually work
508 src/net/server/SecureXMLRPCServer.py:
509 SecureSocketServer is now threaded
510
511 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
512 src/net/client/gliclient.py:
513 try to use HTTPS for XMLRPC first and fallback to HTTP
514 pretend mode
515 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
516 HTTPS XMLRPC goodness from samyron
517 pass name of certificate
518
519 31 Oct 2005; Preston Cody <codeman@gentoo.org>
520 wegli: daemons and services screens done.
521
522 30 Oct 2005; Preston Cody <codeman@gentoo.org>
523 webgli: networking and users screens
524 added return_redirect to handler.py
525 loading and saving install/client profiles works for webgli now
526 Review also done
527
528 *GLI-0.2 (27 Oct 2005)
529
530 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
531 src/templates/x86ArchitectureTemplate.py:
532 properly check for bootloader emerge exist status with exitsuccess()
533 log output of grub install command
534 add --batch --no-floppy to grub command
535 grubinstallstring only gets logged if debug is on
536 src/GLIUtility.py:
537 update progress bar to 100% when process finishes
538
539 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540 src/GLIClientController.py:
541 added debugging code for the interaction between the 2 threads via Event()
542 src/GLIUtility.py:
543 doubled the buffer size in spawn()
544 bump buffer size up to 16384
545 only report progress in 5% increments
546 src/GLIArchitectureTemplate.py:
547 kernelpkgs.txt support code
548 above disabled because it sucks
549 added add_pkg_to_world()
550
551 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
552 src/GLIArchitectureTemplate.py:
553 use tar | tar to copy files in copy_pkg_to_chroot()
554 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
555
556 23 Oct 2005; Preston Cody <codeman@gentoo.org>
557 DEBUGGING ADDED TO AT. verbose field added to CConfig.
558
559 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
560 src/net/server/gliserv.py:
561 / maps to index.html
562 look for actual files in html/
563 src/net/html:
564 new template
565 src/GLIUtility.py:
566 added parse_vdb_contents()
567 src/GLIArchitectureTemplate.py:
568 added copy_pkg_to_chroot()
569 added debug code to dynamic-stage3
570 switch dynamic-stage3 to new method
571 lots of bug fixes from adding debug code
572
573 22 Oct 2005; Preston Cody <codeman@gentoo.org>
574 webgli initial bootloader support + changed make.conf.
575 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
576
577 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
578 src/GLIUtility.py:
579 horrible tangled mess of code that is tarball unpacking subprogress display
580 add unpack progress to portage snapshot
581 use read() instead of readlines() in spawn()
582 only update progress bar for whole percents
583
584 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
585 src/templates/x86ArchitectureTemplate.py:
586 change call to 'grub' to use GLIUtility.exitsuccess()
587 add definition of 'build_mode' in _configure_lilo()
588 src/misc/updategtkfe, src/misc/updateglid:
589 fix so subshell is called in root shell
590
591 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
592 src/net/server/handlers/WebGLIHandler.py:
593 stage screen launches URI browser in sized window with various properties set
594
595 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
596 src/misc/updategtkfe:
597 updated to actually work
598 remove previous snapshot and extracted dir before downloading
599 src/misc/updateglid:
600 updated to actually work
601 src/templates/x86ArchitectureTemplate.py:
602 fixed bug where grub code was looking for 'root+root+file_name2'
603
604 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
605 src/net/server/handlers/WebGLIHandler.py:
606 URI browser
607 added mirror selection
608 src/GLIUtility.py:
609 ls via ssh strips off ending *
610
611 16 Oct 2005; Preston Cody <codeman@gentoo.org>
612 more updates to webgli. stage selection.
613
614 11 Oct 2005; Preston Cody <codeman@gentoo.org>
615 updated webgli with preliminary Network Mounts support.
616
617 9 Oct 2005; Preston Cody <codeman@gentoo.org>
618 GenDialog: string formatting and yes/no label fixes.
619 added WebGLI template for gliserv.py
620 added WebGLIHandler as well as a definition for it in gliserv.py
621 updates to the webgli files even though they won't be there for long.
622 Utility: remove exception for non-existant grppkgs.txt until the new livecd
623 goes public.
624
625 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/net/server/gliserv.py:
627 override dict to not be so anal
628 main server now loads separate module to handle requests
629 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
630 split out profile URLs into separate handler function
631 move handlers into subdirectory
632 add Welcome and Clients handlers
633
634 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
635 src/GLIUtility.py:
636 raise exception if password prompt received twice
637
638 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/GLIUtility.py:
640 removed rot13ify()
641
642 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
643 src/net/server/gliserv.py:
644 allow for param to be passed multiple times in GET
645 no XMLRPC functions return None
646 modify POST request parsing to only create a list if needed
647 fix GET request parsing so the list creation for multiple values works
648 src/net/client/gliclient.py:
649 various typo and type mismatch fixes
650 exit after exception
651
652 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
653 src/net/client/gliclient.py:
654 initial commit
655 pass MAC to XMLRPC functions
656 src/net/server/GLIServerProfile.py:
657 rename GLIClientsProfiles to GLIServerProfile
658
659 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
660 src/net/server/gliserv.py:
661 now handles POST requests
662 move majority of request handling code to common_handler() to reduce code
663 duplication
664 profile loading
665 client reg via XMLRPC goes into SharedInfo()
666 /showclients redesign
667 template fixes
668 allow handler functions to add/change headers
669 save profile
670
671 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
672 src/net/server/GLIClientsProfiles.py:
673 initial commit
674 src/net/server/template.html:
675 initial commit
676 src/net/server/gliserv.py:
677 add template mojo
678
679 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
680 src/net/server/gliserv.py:
681 XMLRPC mojo
682
683 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
684 src/GLIArchitectureTemplate.py:
685 add code in _edit_config() to comment line where variable is defined
686 previously
687 insert new line under previous definition of variable if it exists
688 small _edit_config() cleanup
689 src/GLIStorageDevice.py:
690 add clear_partitions() function
691 new sizes for recommended partition layout
692 automatically calculate swap size for recommended layout
693
694 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
695 src/templates/x86ArchitectureTemplate.py:
696 fat16 mojo
697
698 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
699 src/GLIStorageDevice.py:
700 prevent do_recommended() from being run twice
701 rewrite do_recommended() to be more robust
702 src/GLIArchitectureTemplate.py:
703 rework _edit_config() to not write duplicate entries
704
705 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
706 src/GLIStorageDevice.py:
707 added do_recommended() function to automatically created 256M/1G/* layout
708
709 17 Sep 2005; Preston Cody <codeman@gentoo.org>
710 src/gli-dialog.py: added set_distcc to the list
711 GenDialog: added set_distcc. untested.
712 IP: added install_distcc flag.
713 AT: added install_distcc function based on the flag. runs after build_kernel
714 changed AT spawn command for distcc for nodeps.
715
716 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
717 src/GLIUtility.py:
718 add rot13ify() function
719
720 16 Sep 2005; Preston Cody <codeman@gentoo.org>
721 src/GenDialog.py
722 added a sentence of text. unchecking support added.
723
724 15 Sep 2005; Preston Cody <codeman@gentoo.org>
725 src/GLIUtility.py
726 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
727 src/GenDialog.py
728 still working on extra_packages. transformed the list to new format.
729 added GRP indication to list. untested.
730 TODO lists updated.
731 src/fe/dialog/gli-dialog.py
732 spelling mistook.
733
734 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
735 src/GLIUtility.py:
736 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
737
738 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
739 src/GLIUtility.py:
740 add get_directory_listing_from_uri()
741 add http support to above
742 add ftp support to above
743 add scp support to above
744 src/GLIArchitectureTemplate.py:
745 "0" instead of 0 for key of single-element dict passed to _edit_config()
746
747 5 Sep 2005; Preston Cody <codeman@gentoo.org>
748 value_only -> only_value
749
750 3 Sep 2005; Preston Cody <codeman@gentoo.org>
751 gutted out all of etc_portage structure since it is now all handled by
752 etc_files
753
754 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
755 src/GLIArchitectureTemplate.py:
756 install_packages() sends progress update notifications
757 src/templates/x86ArchitectureTemplate.py:
758 increase sleep to 5s between format tries
759 src/GLIClientController.py:
760 pass 'self' to AT instead of 'self._pretend'
761
762 2 Sep 2005; Preston Cody <codeman@gentoo.org>
763 logger -> logger.log in x86AT
764
765 1 Sep 2005; Preston Cody <codeman@gentoo.org>
766 added set_etc_portage to IP. debugging gli-d's support for it.
767
768 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
769 src/templates/x86ArchitectureTemplate.py:
770 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
771
772 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
773 src/GLIArchitectureTemplate.py:
774 add _portage_best_version() function and rework install_packages() to allow
775 for future X of Y tracking
776 Use best_visible instead of best_version
777 tracked down and fixed missing = causing empty install extra packages
778 use = when emerging also
779 quickpkg hokey pokey
780 run _get_packages_to_emerge() again with -pk
781
782 22 Aug 2005; Preston Cody <codeman@gentoo.org>
783 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
784 the end of install_packages.
785 added updateglid to /src/misc
786 updated all core files with new GPL notice and copyright statement.
787
788 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
789 src/GLIUtility.py:
790 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
791 a snapshot in /mnt/cdrom/snapshots/
792 get_snapshot_from_cd() adds file:// at the beginning
793 change calls to extra package special case functions to 'self.blah'
794
795 21 Aug 2005; Preston Cody <codeman@gentoo.org>
796 src/ArchTemplate: changed "voodoo".
797 changed order of portage sync methods. made a fallback to webrsync if
798 normal emerge sync fails.
799 removed get_sources_from_cd because it is obsolete.
800 add special cases to install_packages. remove fatal exception on package
801 install failure b/c the box will still be bootable.
802 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
803 handled in the FEs.
804 src/GenDialog: added a bunch of code for dealing with x11-based packages.
805 awaiting testing.
806
807 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
808 src/GLIStorageDevice.py:
809 global try/except block around fs resizable detection code
810 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
811 install-failed cleanup function
812
813 18 Aug 2005; Preston Cody <codeman@gentoo.org>
814 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
815
816 16 Aug 2005; Preston Cody <codeman@gentoo.org>
817 GLIGenDialog:
818 add drive choices for loaded configs.
819 force snapshot for dynamic_stage3
820 init the snapshoturi input to the cd snapshot if not already selected.
821 if dynamic_stage3, skip the make.conf step.
822 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
823 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
824
825 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
826 src/GLIArchitectureTemplate.py:
827 manually call MAKEDEV in stage3-dynamic code
828 copy /etc/inittab.old to /etc/inittab in chroot
829 src/GLIUtility.py:
830 add beginning of validate_uri() function
831 add file:/// support to validate_uri()
832 single quotes when setting livecd password
833
834 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
835 src/GLIGenDialog.py:
836 change getmountpoint() to get_mountpoint()
837 src/misc/updategtkfe:
838 committed script to automatically download latest snapshot and run gtkfe
839 src/templates/x86ArchitectureTemplate.py:
840 fix _configure_lilo_add_windows() for IP -> GLISD stuff
841 src/GLIArchitectureTemplate.py:
842 give tmp_minor an initial value in mount_local_partitions so that the value
843 remain from the previous drive
844
845 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
846 src/templates/x86ArchitectureTemplate.py:
847 Fix _configure_lilo() for IP using GLISD stuff
848 src/GLIArchitectureTemplate.py:
849 install_cron_daemon() treats "none" specially
850
851 14 Aug 2005; Preston Cody <codeman@gentoo.org>
852 old patch from Steven Mertens to resolve bug #96642
853 numerous asthetic changes to GenDialog, no real functionality changes though.
854 strings renamed for global use if necessary.
855 fix all three parts of bug 102291
856 disable set_etc_portage until fully-written.
857
858 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
859 src/GLIClientController.py:
860 lower-case http/ftp proxy envvars
861
862 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
863 src/GLIClientController.py:
864 log end of pre_install steps to aid in debugging
865 src/templates/x86ArchitectureTemplate.py:
866 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
867
868 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
869 src/GLIArchitectureTemplate.py
870 check to make sure that the device node we're wait for to exist isn't of
871 type 'free'
872
873 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
874 src/GLIGenDialog.py:
875 convert install_packages to list in set_extra_packages()
876 check return code of checklist() call in "Manual" section
877 *actually* fix the first problem
878
879 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
880 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
881 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
882
883 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
884 src/GLIArchitectureTemplate.py:
885 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
886
887 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
888 Add CDATA support to SimpleXMLParser and add utility functions for it.
889
890 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
891 src/GLIArchitectureTemplate.py:
892 Fix case where vixie-cron is specified as a full package atom, as we still
893 don't want to run 'crontab /etc/crontab' for it.
894
895 *GLI-0.1 (3 Aug 2005)
896
897 30 Jul 2005; Preston Cody <codeman@gentoo.org>
898 add scp to list of is_uri() so GenDialog doesn't complain.
899 fixed livecd-kernel bug in bootloader code.
900 fixed gendialog for dynamic_stage3 instead of "networkless"
901 change bootloader to allow for both initrd and initramfs.
902 fix IP for dynamic_stage3.
903 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
904
905 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
906 Added full scp:// URI support to get_uri() in GLIUtility
907 Remove "networkless" from dynamic stage3 if locic.
908 Remove print statement from scp:// code.
909 Change scp code to check for "assword: " instead of "Password:"
910 Fix post-install network code to create net.eth1+ symlink correctly
911 Check to make sure pkg can be split on / and some debugging code
912 Add 2>dev/null to emerge call in _get_packages_to_emerge()
913 SimpleXMLParser handles True/False/None correctly now
914 Comment out above fix
915 Add partitioning wait-for-device-to-exist code to mount_local_partitions
916
917 28 Jul 2005; Scott Myron <samyron@gentoo.org>
918 Removed a FIXME in the GLIClientConfiguration that is no
919 longer needed.
920
921 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
922 Default to x86 in ClientConfig
923 Typo in build-a-stage3 code.
924 Remove MAKEDEV call in build-a-stage3 postscript.
925
926 26 Jul 2005; Preston Cody <codeman@gentoo.org>
927 Rewrote init of IP for gli-d. Other GenDialog updates.
928 allow network_type to be None in CConfig.
929
930 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
931 Add _dynamic_stage3 option to IP.
932 Add check for that option to dynamic stage3 code in ArchTemplate.
933 Fix code to determine default route in get_eth_info() in GLIUtility.
934 Fix serialization of dns-servers in ClientConfig.
935
936 24 Jul 2005; Preston Cody <codeman@gentoo.org>
937 changed default values of cron/logger in IP.
938 moved GenDialog IP init out to the individual files. gli-dialog's version
939 will change quite a bit.
940
941 22 Jul 2005; Preston Cody <codeman@gentoo.org>
942 added ppcArchTemplate. blank now. working on yaboot.
943 modified ArchTemplate for amd64 and ppc custom kernels.
944 skeleton implementation of _configure_yaboot.
945 small fixes to other templates.
946
947 21 Jul 2005; Preston Cody <codeman@gentoo.org>
948 GenDialog updates. changed comment in IP.
949
950 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
951 src/GLIInstallProfile.py:
952 Fix codeman's screwup of changing the service seperator to ',' in the parser
953 without changing it in the serialization code! Also document this in a
954 comment so you find it easier. Everybody needs to make sure they update
955 their install profiles!
956
957 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
958 src/GLIArchitectureTemplate.py:
959 Fix casting of list to string and concat of None with string, as well as
960 commented prototype of checking that mounting actually worked (found a case
961 where mount can return success, but the mount won't be done).
962
963 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
964 src/templates/x86ArchitectureTemplate.py:
965 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
966 checking for the device, and sleeping 1 second each time.
967
968 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
969 src/templates/x86ArchitectureTemplate.py:
970 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
971 bootloader works again. Also rename _install_{grub,lilo} to
972 _configure_{grub,lilo} since they don't install the loaders anymore
973 themselves.
974
975 7 Jul 2005; Preston Cody <codeman@gentoo.org>
976 fix global USE flags to not include the arch types at the end.
977 updates to GenDialog and gli-d.
978
979 6 Jul 2005; Preston Cody <codeman@gentoo.org>
980 fixing bootloader code for no initrd and initrd->initramfs naming change.
981
982 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
983 Proper comments and parameters to GLIException in install_mta()
984 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
985 Add strip() to list_mirrors(), list_subarch_from_mirror() and
986 list_tarball_from_mirror() to eliminate blank last item.
987
988 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
989 Added stage3 generation code.
990
991 5 Jul 2005; Preston Cody <codeman@gentoo.org>
992 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
993 Mild changes to GenDialog.
994
995 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
996 Remove separate install step configure_rc_conf() since it's handled by
997 update_config_files()
998 Make a copy of newvalues in _edit_config() so quotes aren't added when the
999 function is called twice on the same file.
1000
1001 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1002 Missing \ in sed in _get_packages_to_emerge()
1003 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1004 Check in _quickpkg_deps() to ignore blank package names returned from
1005 _get_packages_to_emerge()
1006
1007 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1008 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1009 in the dialog.py gauge code.
1010
1011 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1012 Add code to update_config_files() to go through etc_files and update stuff.
1013 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1014 Only use float() in partition xml parsing code if type == "free"
1015
1016 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1017 finished almost all internationalization of GenDialog.
1018 attempt at fixing rc.conf function. moved 3 generate functions out of
1019 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1020 added dialog.py to the fe/dialog directory so it actually gets used.
1021
1022 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1023 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1024
1025 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1026 fix extra entry in list_mirrors()
1027 beginning internationalization runthrough.
1028
1029 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1030 added dialog.py to /src temporarily until it gets accepted upstream.
1031 fix for unused value in form in dialog.py and changed heights.
1032 fix GenDialog forms.
1033
1034 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1035 Changed hostname/domainname for new baselayout.
1036 Changed _add_to_runlevel errors to logs.
1037 Updated TODO list to show status of GenDialog
1038 More updates to GenDialog including two checklists that probably won't work.
1039 update IP to use comma-separated list instead of space separated for services.
1040
1041 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1042 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1043 GenDialog as it gets closer to completion.
1044
1045 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1046 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1047 instead of int() in add_partition_device_partition() for minor (closes 96804)
1048
1049 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1050 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1051 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1052 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1053
1054 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1055 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1056 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1057 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1058 Fix undefined variable 'output' issue in spawn().
1059
1060 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1061 More updates to GenDialog and gli-d.
1062
1063 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1064 Modify list_mirrors() to return a list of mirror URL/name pairs.
1065
1066 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1067 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1068 get subarch.
1069
1070 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Backend partitioning will create disklabel is none exists. Installprofile
1072 defaults to "" now instead of "msdos" for disklabel type. Fix for
1073 mount_local_partitions() to remember device along with minor in the
1074 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1075 add else block to log unsupported netmount types to mount_network_shares()
1076
1077 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1078 src/GLIArchitectureTemplate.py:
1079 Refactor kernel_compile common stuff, fix 2.4 build process.
1080 src/fe/cli/clife.py:
1081 Logging system.
1082 src/GLIUtility.py, src/GLIStorageDevice.py:
1083 Add comments about re-writes needed for boxes without sysfs.
1084
1085 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1086 src/GLIArchitectureTemplate.py:
1087 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1088 'make dep' call for custom compile. build_mode support for prepare-only and
1089 none types completed. custom compile function chains shell functions in
1090 spawned script, to allow for catching all errors.
1091
1092 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1093 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1094 and GenDialog. other gendialog updates as well. kernel updates untested.
1095
1096 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1097 src/GLIInstallProfile.py:
1098 Change structure of etc-portage stuff. The serialization was broken before my
1099 last commit, and I am the only person that's ever used it. The new schema is
1100 as follows:
1101 <etc-portage>
1102 <file name="package.mask"/>
1103 <file name="package.unmask">
1104 <entry atom="sys-kernel/openmosix-sources"/>
1105 </file>
1106 <file name="package.use">
1107 <entry atom="sys-libs/db">
1108 -java
1109 </entry>
1110 <entry atom="dev-libs/cyrus-sasl">
1111 -ldap
1112 </entry>
1113 </file>
1114 </etc-portage>
1115
1116
1117 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1118 src/GLIInstallProfile.py:
1119 Add new entry for gli-profile/kernel-build-method item. Add missing
1120 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1121 keys in the same order.
1122
1123 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1124 src/GLIArchitectureTemplate.py:
1125 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1126 was repeatedly appended to make.conf.
1127
1128 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1129 src/GLIArchitectureTemplate.py:
1130 Put some Linux-2.6 specific code under a if statement. Store list of
1131 successfully mounted swap device for using swapoff. Add proper error checking
1132 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1133 'file'. Clean up some redundant code (thanks to pychecker).'
1134
1135 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1136 Fix typos: get_extended() instead of get_extended_partition(). Added
1137 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1138 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1139
1140 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1141 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1142 in add_network_interface.
1143
1144 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1145 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1146 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1147 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1148 prepare_chroot.
1149
1150 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1151 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1152 +src/fe/installer-gtk:
1153 Add new automated CLI frontend. Add scripts that are the intended means to
1154 use each frontend.
1155
1156 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1157 src/GLIClientController.py:
1158 Add null type to network config, for cases where the interface is already up
1159 and should not be touched (netboot for example).
1160
1161 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1162 src/GLIArchitectureTemplate.py:
1163 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1164 string!. Try to use binary packages if available by default.
1165
1166 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1167 src/GLIArchitectureTemplate.py:
1168 More error checking for _add_to_runlevel, to ensure that the init script
1169 actually exists before we try to add it. set_services phase must take place
1170 after the package installation, otherwise the init scripts might not exist.
1171 Find the correct init script for the cron and logging daemons, and add that
1172 instead of the package atom.
1173
1174 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1175 src/GLIArchitectureTemplate.py:
1176 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1177 usage of 'file' to 'contents' for the variable name, as it shadows
1178 __builtin__.file.
1179
1180 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1181 src/GLIArchitectureTemplate.py:
1182 Add MTA install code, and include MTA install phase. Ensure
1183 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1184 for 'none' kernel config for build_kernel phase. Put kernel_script in
1185 /var/tmp instead of /root for build_kernel phase.
1186
1187 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1188 Rename mta variables to match syslog/cron variables.
1189
1190 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1191 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1192 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1193 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1194 src/templates/.cvsignore, src/tests/.cvsignore:
1195 Refactor partition formatting again to include error checking. Allow 'none'
1196 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1197
1198 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1199 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1200 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1201 only have a single spawn call.
1202
1203 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1204 refixed samyron's fix of set_architecture_template.
1205
1206 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1207 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1208 be executable.
1209
1210 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1211 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1212 error checking when you call set_architecture_template.
1213
1214 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1215 moved the mkfsopts input to the partition options menu instead of the during
1216 the creation process. updated GenDialog to say it supports reiserfs v3.
1217
1218 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1219 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1220 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1221 Add support for other partition types to dialogfe.
1222 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1223 avoid integer overflows and wraparounds.
1224
1225 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Removed start/end from XML output and added mkfsopts to partitioning info.
1227 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1228 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1229 in GLIClientConfiguration. Change from .1 and .9 to constants for
1230 partitioning. Fix free space overwriting bug. Remove a few unused functions
1231 from rewrite. Fix call to get_partition_at()
1232
1233 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1234 Updates to GenDialog and dialogfe.
1235
1236 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1238
1239 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1240 more GenDialog updates to partitioning.
1241
1242 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1243 Indenting issue in GLISD/get_ordered_partition_list.
1244 updates to GenDialog partitioning and added default UTC for timezone in IP.
1245
1246 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 Added GLISD.get_model()
1248
1249 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1250 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1251 More updates to GenDialog :)
1252
1253 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1254 Added get_interface_realname() function.
1255
1256 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1257 Added auto-save of CConfig and copying to new /root after install.
1258 yet even more GenDialog updates.
1259
1260 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1261 removed print statement from GLISD. more updates to GenDialog.
1262
1263 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1264 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1265 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1266 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1267 places in GLIClientConfiguration.
1268
1269 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 Fix mount_local_partitions(), configure_fstab(), and
1271 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1272 A few more fixes for templates/x86Archtemplate
1273
1274 27 May 2005; Preston Cody <codeman@gentoo.org>
1275 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1276 a work in progress.
1277
1278 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1279 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1280 directly. GLISD can now handle data imported from XML.
1281
1282 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1283 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1284 handle blank (no disklabel) disks.
1285
1286 20 May 2005; Preston Cody <codeman@gentoo.org>
1287 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1288 up, documented, and separated out serialization and grouped all sections.
1289
1290 19 May 2005; Preston Cody <codeman@gentoo.org>
1291 Reorganization of ClientConfiguration and gutting of unused functions.
1292 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1293
1294 18 May 2005; Preston Cody <codeman@gentoo.org>
1295 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1296
1297 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1299 partitioning. CC serializes install profile to disk and prepare_chroot()
1300 copies it into /mnt/gentoo/root
1301
1302 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1303 Moved URI parsing into new function parse_uri()
1304
1305 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1306 Added XMLParser module.
1307
1308 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1310 Minor fix to is_uri() regex to allow hyphens in hostname.
1311
1312 12 May 2005; Preston Cody <codeman@gentoo.org>
1313 Updated finishing_cleanup for new unmounting method from agaffney.
1314
1315 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1316 Fix GLILogger to use correct time format string. Fix _edit_config() to
1317 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1318 unicode support to is_realstring().
1319
1320 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1322 return value instead of non-zero. Add code to output a traceback to the
1323 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1324 instead of --nocolor.
1325
1326 10 May 2005; Preston Cody <codeman@gentoo.org>
1327 Added GLIGenDialog.py to make a generic class for the dialog functions that
1328 can be used by both dialogfe and the netfe/be. updated both for new filename.
1329 date changes. 2004->2005.
1330
1331 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1332 Removed 'quiet=True' from spawn() calls
1333
1334 10 May 2005; Preston Cody <codeman@gentoo.org>
1335 Updated GLIUtility with patches from chotchki. Also added documentation
1336
1337 9 May 2005; Preston Cody <codeman@gentoo.org>
1338 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1339 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1340 from bug #89683, mostly touchups.
1341
1342 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1343 GLIStorageDevice cleanup patch from bug #91761
1344
1345 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1346 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1347 _edit_config(). Error logging casts 'error' to str
1348
1349 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 Exceptions received in CC are logged before being passed to the FE. Added
1351 code to CC to handle exceptions *not* thrown by the installer itself.
1352
1353 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 get_max_mb_for_resize() returns -1 if not self.resizeable
1355
1356 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 More dirty rsync hacks :-/
1358
1359 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1360 Patches from chotchki (bug #90325) to improve CC networking. untested.
1361
1362 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1363 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1364 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1365 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1366 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1367 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1368 _get_packages_to_emerge()
1369
1370 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1371 Added group-adding code to set_users in ArchTemplate
1372
1373 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Added post-install script code
1375
1376 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1377 Fixed encapsulation issues in GLIClientController (bug #90141)
1378
1379 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1380 Update resizing code in GLIStorageDevice
1381
1382 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1383 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1384
1385 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1386 Reverted change to ArchTemplate and added support for commented line in old
1387 code.
1388
1389 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Changed _edit_config() to modify value in-place instead of commenting out and
1391 adding the new value to the end of the file.
1392
1393 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1394 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1395 Also updated TODO list.
1396
1397 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Use blackace's one-liner to add comments for all function for use with
1399 pythondoc.
1400
1401 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1402 Moved 'end >= device_sectors' check out of loop to check for next partition's
1403 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1404 Partitioning code now tracks start/end of extended for placing logicals. End
1405 point of logical is now adjusted along with start.
1406
1407 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1408 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1409 the way of partitioning from a blank disk. Add int() around access to minor
1410 key in partition information due to new partition code leaving them as float.
1411
1412 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1413 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1414
1415 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1416 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1417
1418 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1419 Added support for DHCP options and MAC addresses in the InstallProfile.
1420
1421 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1422 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1423 sed to properly strip out junk.
1424
1425 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1426 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1427 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1428
1429 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1430 Fixed indent problem in GLICController
1431
1432 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1433 Check for disklabel type "loop" and use the device name without a minor.
1434
1435 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1436 Remove /tmp/compile_output.log and /var/log/install.log when install is
1437 complete. Added code to (hopefully) keep 2nd thread running after install.
1438 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1439 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1440 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1441
1442 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1443 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1444 when unpacking tarball.
1445
1446 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1447 rewrote filesystem_tools. looks like it works so ripping out all the old
1448 filesystem_tools code.
1449
1450 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1451 Changed the print statements to logging in the partitioning BE code.
1452 the logger may need to be imported to the x86archtemplate. unknown yet.
1453 Added the finishing_cleanup function.
1454 added a fix to the logger from BenUrban
1455
1456 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1457 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1458 URIs. The blank uri check has been commented out.
1459 ripped out error checking of set_services. this is done by _add_to_runlevel.
1460
1461 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1462 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1463
1464 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1465 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1466 the install profile if available. Commented out spawn() debugging prints
1467
1468 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1469 small changes to setup_network_post. moved adding to runlevel of net.x to
1470 after the device gets symlinked. added domainname runlevel command.
1471
1472 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1473 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1474 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1475 spawn() call in livecd-kernel code to pass environment variables.
1476 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1477 the install profile if available.
1478
1479 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1480 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1481 to handle installing the livecd kernel into the new system.
1482
1483 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1484 should emerge hotplug and coldplug before adding them to runlevel.
1485
1486 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1487 took chroot out of grub_install command.
1488
1489 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1490 Changed chroot wrapper code in spawn() to write the wrapper the python way
1491 instead of the bash way to avoid quote conflicts. Added
1492 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1493 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1494 as it breaks the piping.
1495
1496 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1497 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1498
1499 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1500 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1501 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1502 GLIInstallProfile.
1503
1504 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1505 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1506 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1507 into /mnt/gentoo in prepare_chroot()
1508
1509 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1510 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1511 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1512 to start/end sectors
1513
1514 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1515 Add 2>&1 to cmd in spawn()
1516
1517 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1518 Modified GLIUtility.exitsuccess() to work with return value from
1519 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1520 creates wrapper script for commands run inside chroot so multiple commands
1521 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1522 for the generated script from spawn()
1523
1524 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1525 Removed default values for stage tarball URI and portage tree URI from
1526 InstallProfile. These should be set by the FEs. also added services step to
1527 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1528 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1529
1530 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1531 Small fix for setting the default gateway. Also added feature to dialogfe.
1532
1533 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1534 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1535
1536 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1537 Fixed a bunch of true -> True typos. lots of em
1538 only write new resolv.conf if there are dns servers listed.
1539
1540 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1541 Commented out 'display_on_tty8=True' in start_portmap()
1542
1543 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1544 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1545
1546 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1547 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1548 lang parameter to __init__()
1549
1550 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1551 updates to TODO list.
1552
1553 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1554 Initial code for quickpkg GRP support. Fix loop to grab packages from
1555 'emerge -p blah'
1556
1557 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1558 check for dhcp in the network stuff and emerge it if it is.
1559 added quickpkg to TODO list
1560
1561 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1562 Changed the raising of 'warning' exceptions to a simple log of the error
1563 so that the installer can continue.
1564
1565 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1566 Some big changes. First, changed most output to display_on_tty8.
1567 Second, added log lines to all templates. Some smaller fixes such as typos.
1568 Also did some cleanups of old commented lines.
1569
1570 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1571 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1572 Undo change with fix. Escaping fix in GLIStorageDevice.py
1573
1574 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1575 more updates to TODO list. hopefully we'll soon start removing items instead
1576 of adding them.
1577
1578 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1579 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1580
1581 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1582 updated TODO list. (again)
1583
1584 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1585 changed output of portmap start to display_on_tty8.
1586 fixed bootloader for udev and multiple kernels
1587 fixed custom kernel config (again)
1588
1589 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1590 changed default value of CC._enable_ssh to True because this is smart.
1591 added code to allow custom kernel .config. may be unstable and break. sorry.
1592
1593 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1594 partition() now waits until after it checks for partition flags before delete
1595 the partitions :P
1596
1597 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1598 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1599 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1600 blank.
1601
1602 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1603 Various fixes related to the add_users function. Still not yet finished.
1604 Added things to the TODO list. Lets start using that!
1605
1606 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1607 Added code to x86Template to format newly created partitions. Also added
1608 some error checking code. GLIStorageDevice passes 'minor' with data to
1609 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1610 mounting code.
1611
1612 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1613 Took out unnecessary setting of random livecd root password. the cd already
1614 sets it randomly.
1615
1616 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1617 Took out an unneeded step from CC's run()
1618
1619 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1620 Attempt at detecting and adding windows partitions to lilo.
1621
1622 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1623 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1624 partition. fixed misc exit_status => exitstatus typo.
1625
1626 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1627 Added basic code for resizing filesystems with pyparted. Fixed code for
1628 resizing ntfs and ext2/3.
1629
1630 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1631 Fixed partition() in x86Template so that it scans through logicals and deletes
1632 before deleting containing extended partition. Also clears partition table to
1633 be safe before third pass.
1634
1635 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1636 Added mount_network_shares. not able to test it from this computer.
1637 will test when i get back to school.
1638 also added start_portmap to the client_controller as an always-do.
1639 agaffney says this is needed for NFS mounts to work.
1640
1641 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1642 Partial rewrite of partitioning code in x86Template. No longer shells out to
1643 parted to perform actions, now uses all pyparted calls. Code "works" in a
1644 test, but still needs lots of TLC. Also modified tests/install.py to work
1645 with x86Template and GLIClientConfiguration.
1646
1647 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1648 Initial move of partitioning code from ArchTemplate to x86Template.
1649
1650 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1651 Added grp_install and services to InstallProfile. forgot about the set_root_password
1652
1653 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1654 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1655 Test Install ran very well (skipping partitioning).
1656
1657 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1658 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1659 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1660 some may still have eluded me.
1661
1662 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1663 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1664 Just finished mount_local_partitions in GLIArchitectureTemplate
1665
1666 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1667 Added get_num_sectors() to GLIStorageDevice.
1668
1669 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1670 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1671 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1672 from GLIInstallProfile.
1673
1674 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1675 GLIStorageDevice returns "unknown" instead of "" for get_type()
1676
1677 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1678 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1679 actually work. Commented out resizability checking code for speed.
1680
1681 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1682 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1683 GLIStorageDevice at the suggestion of plors
1684
1685 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1686 Added a function to GLIUtility to pull a value from a make.conf-style config
1687 file. Minor type fix to GLIInstallProfile.py
1688
1689 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1690 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1691 network mounts from partition data structure in GLIInstallProfile
1692
1693 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1694 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1695 can be resized.
1696
1697 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1698 Added some of the final functions to GLIInstallTemplate.
1699 Yes this project is still active despite rare use of the Changelog!
1700
1701 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1702 Added the GLIPartitionTools.py file. This is a temporary insertion of
1703 partitioning tools that will eventually go into their own package.
1704
1705 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1706 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1707 for the program). Added __init__(install_profile, client_configuration) to
1708 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1709 to avoid constantly passing stuff every time we call a method.
1710
1711 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1712
1713 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1714 files without messing up all the other stuff in them. This will be used for making
1715 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1716
1717 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1718
1719 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1720 have a few basic things. I added two private methods. One is _depends(). This
1721 will be used for dependency checking (ie. unpacking a tarball requires that
1722 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1723 same syntax as os.system(), however, instead of being run in the liveCD
1724 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1725 isolated the code. Hope to work more this week to get this class formed...
1726
1727 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1728
1729 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1730 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1731 to allow for easier modification (mutable, rather than immutable objects). Updated
1732 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1733 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1734 Added initial unit test code.
1735
1736 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1737
1738 Added initial changelog. Setting up the basic structure of the CVS repository
1739 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1740 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20