/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1361 - (show annotations) (download)
Fri Mar 10 23:50:58 2006 UTC (8 years, 5 months ago) by agaffney
File size: 71898 byte(s)
look for minors out of order instead of disk position

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.619 2006/03/10 23:50:58 agaffney Exp $
5
6 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIStorageDevice.py:
8 raise an exception if the existing partitions are out of disk order
9 look for minors out of order instead of disk position
10
11 8 Mar 2006; Preston Cody <codeman@gentoo.org>
12 src/fe/dialog/gli-dialog and src/GLIGenDialog:
13 added networkless mode to gli-dialog.
14
15 6 Mar 2006; Preston Cody <codeman@gentoo.org>
16 src/templates/x86AT:
17 add windows detection code for grub. untested.
18
19 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/templates/x86ArchitectureTemplate.py:
21 bootloader and partitioning external commands log to compile_output.log
22 wait for device node to exist before resizing
23 add -v to ntfsresize command
24 src/GLIStorageDevice.py:
25 return start/end with ip structure
26 pad min ntfs size by 50 MB just to be safe
27 src/GLIArchitectureTemplate.py:
28 only install filesystem tools for partitions with a mountpoint
29
30 5 Mar 2006; Preston Cody <codeman@gentoo.org>
31 add error catching and text to saving profile dialogs
32
33 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIPortage.py:
35 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
36 src/templates/x86ArchitectureTemplate.py:
37 fix checks for changed partitions so they will actually get deleted
38
39 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIClientController.py:
41 slightly better error handling for pre-install failures
42
43 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
44 src/templates/x86ArchitectureTemplate.py:
45 proper return code checking for ext2/3 resizing
46
47 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
48 src/GLIClientController.py:
49 accept 'none' as well as 'null' for network type
50 src/GLIArchitectureTemplate.py:
51 ignore extended partitions in mount_local_partitions()
52 src/templates/x86ArchitectureTemplate.py:
53 use get_ordered_partition_list() instead of keys().sort() for new_part_list
54 check to make sure start sector for primary isn't less than end sector for
55 previous extended
56 src/GLIClientController.py:
57 write dns servers to /etc/resolv.conf
58
59 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIPortage.py:
61 copy_pkg_to_chroot() uses compile_output.log for command output
62
63 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
64 only keep a 1000 line 'scrollback' buffer for the compile output and log file
65
66 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/GLIPortage.py:
68 add code make GLIPortage.py capable of being run stand-along for dynamic
69 stage3 generation and copying packages in a GRP-ish way
70 grp code fixups
71
72 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIPortage.py:
74 ignore blank packages passed to get_deps() and emerge()
75
76 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
77 src/GLIUtility.py:
78 add get_chosts() function
79
80 *GLI-0.3 (12 Feb 2006)
81
82 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
83 src/templates/x86ArchitectureTemplate.py:
84 pull old start/end sector values from somewhere that actually has them
85 add logic for extended partition to code that makes sure new end sector
86 doesn't overlap start sector of next partitions
87 don't freak out if partition can't be deleted
88
89 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
90 src/GLIPortage.py:
91 run env-update at the end of copy_pkg_to_chroot()
92
93 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
94 src/templates/x86ArchitectureTemplate.py:
95 I'm a complete fscking dumbass. I recorded the end sector for partitions that
96 weren't being touched, but I never used it when recreating them...the end was
97 calculated from the size in MB instead :/
98
99 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
100 src/GLIArchitectureTemplate.py:
101 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
102 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
103 src/GLIPortage.py:
104 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
105 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
106 'resized' flag
107
108 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
109 src/GLIPortage.py:
110 short circuit and check vdb directly if package begins with '='
111
112 8 Feb 2006; Preston Cody <codeman@gentoo.org>
113 added more packages to extra_packages list in IP
114
115 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
116 src/templates/x86ArchitectureTemplate.py:
117 10 tries to create filesystem instead of 3
118 src/GLIPortage, src/GLIArchitectureTemplate.py:
119 ignore_missing flag for copy_pkg_to_chroot()
120
121 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
122 src/GLIPortage.py:
123 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
124
125 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
126 src/net/server/gliserv.py:
127 fix handling of 404 for real files
128 src/net/server/GLIServerProfile.py:
129 look for 'hostname' in attributes instead of 'name'
130
131 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
132 src/SimpleXMLParser.py:
133 initial support for 'include' in XML files
134 src/GLIStorageDevice.py:
135 initial support for %
136 src/GLIClientController.py:
137 add debugging statements to pre-install steps
138
139 15 Jan 2006; Preston Cody <codeman@gentoo.org>
140 webgli/configfiles:
141 check for key in etc_files['rc.conf'] to fix key error
142 webgli/timezone: small fix.
143 webgli/extrapackages: list-type fix
144 webgli/services: same
145 glimd: add/edit_client updates.
146
147 12 Jan 2006; Preston Cody <codeman@gentoo.org>
148 added configure.pyhtml to glimd. minor changes
149 to top and add_client. fixed up showargs.
150 added execute.pyhtml
151 changed register clients line in gliserv for name->hostname.
152 updated TODO.
153
154 10 Jan 2006; Preston Cody <codeman@gentoo.org>
155 src/net/server/*:
156 added add/del/edit client/profile.pythml for glimd.
157 updated templates, showclients, and gliserv.
158
159 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
160 src/net/server/*:
161 stupid threading module...
162
163 8 Jan 2006; Preston Cody <codeman@gentoo.org>
164 AT: rc.conf -> conf.d/clock
165
166 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
167 src/GLIPortage.py:
168 show 'Calculating dependencies for ...' in subprogress bar at beginning of
169 emerge()
170 src/GLIArchitectureTemplate.py:
171 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
172 in the chroot
173 remove _quickpkg_deps() and _portage_best_{visible,version}()
174 src/GLIUtility.py:
175 fail immediately in validate_uri() if provided URI can't be parsed
176 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
177 debug code in spawn()
178 use lower-level os.read() instead of file.read() because python sucks
179 src/templates/x86ArchitectureTemplate.py:
180 basic subprogress reporting for partitioning
181 total_steps was 1 too high
182
183 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIUtility.py:
185 move parse_vdb_contents() to GLIPortage
186 src/GLIPortage.py:
187 remove all symlink fixups
188 ignore 'dir' entries in CONTENTS
189 call tar with -p
190
191 5 Jan 2006; Preston Cody <codeman@gentoo.org>
192 AT: bootsplash is now gensplash
193 gliserv: add advanced_mode to shared_info
194 webgli: Added advanced mode. mostly just disables a few screens.
195
196 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
197 src/GLIPortage.py:
198 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
199 added emerge()
200 update sub-progress after each package is emerged
201 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
202 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
203 remove link if it exists before moving content into place
204 src/GLIArchitectureTemplate.py:
205 install_packages() now calls emerge() in GLIPortage
206 change all calls to self._emerge() to self._portage.emerge()
207 comment out all emerge status checking...using exceptions now
208 call copy_pkg_to_chroot() directly for livecd-kernel
209
210 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
211 src/GLIArchitectureTemplate.py:
212 remove add_pkg_to_world() and copy_pkg_to_chroot()
213 copy installer.log to installer.log.failed on install failure
214 src/GLIUtility.py:
215 added get_keymaps()
216 spawn() takes any False argument for chroot instead of just None
217 src/GLIPortage.py:
218 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
219 change copy_pkg_to_chroot() to work properly with use_root=False
220 figure PORTAGE_TMPDIR properly
221
222 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
223 src/net/server/html/*:
224 converted showclients, load/saveprofile
225
226 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIPortage.py:
228 exclude packages already in chroot vdb from binary deplist
229 chroot to use best_version for chroot's vdb
230 src/runtimedeps.py:
231 accept ROOT via commandline instead of env
232
233 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
234 src/runtimedeps.py:
235 remove passing of ROOT
236 src/GLIPortage.py:
237 modify get_deps() to get deptree for each package and merge into final list
238 remove depgraph class
239 add debugging code to get_deps()
240 src/GLIArchitectureTemplate.py:
241 combine code for GRP/compile in install_packages() into one block
242 debugging code in install_packages()
243
244 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
245 src/runtimedeps.py:
246 initial commit
247 src/GLIPortage.py:
248 use separate script for GRP deps
249 remove calls to portage module
250
251 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
252 src/GLIPortage.py:
253 initial commit
254 move some of portage function from GLIAT
255 flipped around a few function args
256 src/GLIArchitectureTemplate.py:
257 revamp install_packages() for new GLIPortage
258
259 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
260 src/GLIArchitectureTemplate.py:
261 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
262
263 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
264 src/net/server/gliserv.py:
265 wrap generated code in a class to isolate it a bit better
266 302 redirects work
267 don't use cgi.escape() for <% %>
268 src/net/server/html/webgli/*:
269 load/save profile
270 src/GLIUtility.py:
271 change /sbin/lspci to just lspci
272
273 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
274 src/GLIClientController.py:
275 change ordering of statements in CC run() while loop to not go past the end
276 of the array
277 src/GLIArchitectureTemplate.py:
278 removed redundant bind mounts
279
280 18 Dec 2005; Preston Cody <codeman@gentoo.org>
281 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
282 added a diagram by blackace from last night.
283 added the glossary in RTF format.
284
285 17 Dec 2005; Preston Cody <codeman@gentoo.org>
286 x86AT: separated out emerge/configure from running of bootloader
287 added MBR drive support to lilo.
288 these changes will likely not work.
289 AT: added setup_and_run_bootloader step.
290
291 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
292 src/net/server/gliserv.py:
293 call generated code in a function
294 src/net/server/html/webgli/*:
295 include top/bottom
296 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
297 src/GLIClientCongifuration.py:
298 install mode magic
299
300 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
301 src/GLIClientController.py:
302 use GLIException when there's an import problem
303 added debug code to show install_steps
304 src/templates/amd64ArchitectureTemplate.py:
305 add . to import path
306 proper path this time: ../../templates
307 src/GLIArchitectureTemplate.py:
308 add _portage_best_version() function
309
310 11 Dec 2005; Preston Cody <codeman@gentoo.org>
311 added initial glossary and gimli diagram to the docs directory.
312 modify gli-dialog to allow editing of the install_profile after loading XML.
313
314 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
315 src/net/server/html/webgli/:
316 converted globaluse, localuse, networkmounts, portagetree, and stageselection
317 moved saveclientconfig stuff into clientconfig
318 moved saveconfigfiles into config files
319 converted etc_portage and makedotconf
320 converted bootloader and kernel
321 convert daemons, extrapackages, networking, review, services, timezone, users
322 src/net/server/gliserv.py:
323 proper 404 handling for .pyhtml extension
324 HTML escape <% %> stuff
325 work around python's sucky regexes
326 src/GLIInstallProfile.py:
327 allow set_{rsync,ftp,http}_proxy() to accept empty values
328
329 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
330 src/net/server/gliserv.py:
331 initial commit of Legolas templating engine
332 302 redirects
333 src/net/server/html/index.html, src/net/server/webgli_template.html:
334 minor changes for new code
335 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
336 initial commit of the conversion from the monolithic WebGLIHandler.py to the
337 one file per path Legolas goodness
338 partitioning[2-4] done
339
340 5 Dec 2005; Preston Cody <codeman@gentoo.org>
341 webgli: dhcp options in CC and post-install.
342 updated comparison chart.
343 webgli: etc/portage/* and distcc support added. not too-well tested.
344
345 4 Dec 2005; Preston Cody <codeman@gentoo.org>
346 webgli_template.html: valign=top on left side.
347 webgli: fix bootloader boot_device. now working.
348 webgli: CC proxy done. post-install proxy in progress.
349
350 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
351 src/net/server/webgli_template.html:
352 increase padding for content cell to 7px and add colspan=2
353
354 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
355 webgli: added graphic bar on top
356 webgli: added hover effects on the links on the left
357 webgli: re-rendered header_bg.png to stretch without artifacts
358
359 3 Dec 2005; Preston Cody <codeman@gentoo.org>
360 webgli: make.conf disabling fixes for dynamic_stage3
361 fixed portage snapshot browse popup
362 all changes tested.
363 webgli: add debug mode to CC screen. the screen still needs lots of work.
364
365 1 Dec 2005; Preston Cody <codeman@gentoo.org>
366 added debug mode question to gli-dialog
367 added CC proxies to CC networking for gli-dialog
368 webgli: fixed skip CC networking if connection active
369 webgli: portage snapshot defaults to CD
370 webgli: bootloader mbr drive selection
371 webgli: USE flags unselectable if dynamic_stage3
372 webgli: manual extra packages and save button.
373
374 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
375 src/GLIUtility.py:
376 change ping count to 2
377 docs/comparison.html
378 initial commit
379
380 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
381 src/templates/x86ArchitectureTemplate.py:
382 fix map() issue with grub code
383 replace kernel_names and initrd_names loops with one-liners
384
385 27 Nov 2005; Preston Cody <codeman@gentoo.org>
386 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
387 initial gli-dialog support for recommended partitioning layout and clear.
388 failure cleanup now an option for gli-dialog.
389 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
390 added comparison list and updated TODO!
391
392 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
393 src/GLIArchitectureTemplate.py:
394 fix to stage1() debug code
395 fix to stage2() debug code
396
397 26 Nov 2005; Preston Cody <codeman@gentoo.org>
398 some more bootloader code fixes. forgot boot_device != mbr_device.
399
400 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
401 src/GLIStorageDevice.py:
402 fix to unallocated space merging when last one is after part 4
403
404 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
405 src/GLIArchitectureTemplate.py:
406 small fix to debugging code in copy_pkg_to_chroot()
407
408 23 Nov 2005; Preston Cody <codeman@gentoo.org>
409 more bugfixes with bootloader code
410 gli-dialog side appears to work
411
412 21 Nov 2005; Preston Cody <codeman@gentoo.org>
413 initial adding of boot_device to backend.
414 initial boot_device support added to gli-dialog.
415 some fixes of my poor coding
416
417 20 Nov 2005; Preston Cody <codeman@gentoo.org>
418 converted gli-dialog to use the install_package_list.
419 gtkfe has already been converted by AllanonJL
420 new way working in gli-dialog now and added to webgli.
421 added set/get_boot_device() to IP
422
423 19 Nov 2005; Preston Cody <codeman@gentoo.org>
424 get_install_package_list added to InstallProfile. This can be used by the FEs
425
426 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
427 src/templates/x86ArchitectureTemplate.py:
428 call ls with '-1 --color=no'
429
430 16 Nov 2005; Preston Cody <codeman@gentoo.org>
431 added warning (#9) to GRP ppl about stage3 tarballs
432
433 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
434 src/GLIArchitectureTemplate.py:
435 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
436 confused
437
438 13 Nov 2005; Preston Cody <codeman@gentoo.org>
439 removed protocols from rc.conf screens
440 finished initial rc.conf and make.conf in webgli
441
442 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
443 src/net/server/gliserv.py:
444 add -h option to usage()
445 show time and request URI in debug mode
446 show client IP in debug mode
447 just use IP instead of trying to do a reverse lookup
448
449 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
450 src/net/server/gliserv.py:
451 'classier' 401 message
452 proper commandline parsing
453 help via -h
454 user/pass can be specificed via commandline option
455
456 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
457 src/net/server/gliserv.py:
458 basic HTTP auth
459
460 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
461 src/net/server/gliserv.py:
462 dynamic module reloading (yipee!)
463 send 'Last-Modified' header for real files
464 respond to HEAD with just headers
465 src/net/server/handlers/WebGLIHandler.py:
466 icons for drives
467
468 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
469 src/net/server/handlers/WebGLIHandler.py:
470 initial 'pretty' partition table display support
471 clicking partition in 'pretty' display works instead of radio buttons
472 radio buttons and pretty display work together
473 META redirect instead of javascript
474 pretty display stretches across entire screen
475 'Recommended layout' and 'Clear drive' functions
476 properly catch exceptions from do_recommended()
477 src/GLIArchitectureTemplate.py:
478 replace preinst, copy, postinst, rm steps with qmerge
479 whoops...that shouldn't have been commented out
480 create image_dir with -p in copy_pkg_to_chroot()
481 more generic of symlink crappiness
482 new copy_pkg_to_chroot() actually works now
483
484 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
485 src/GLIStorageDevice.py:
486 initial generic disk support
487 fixes for add_partition() code
488 src/net/server/handlers/WebGLIHandler.py:
489 added support for creating generic disks
490 add new partition working
491 save and delete partitions
492
493 6 Nov 2005; Preston Cody <codeman@gentoo.org>
494 webgli: Partitioning making progress.
495
496 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
497 src/GLIArchitectureTemplate.py:
498 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
499 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
500 dir) and works around /etc/gconf symlink problem
501
502 5 Nov 2005; Preston Cody <codeman@gentoo.org>
503 webgli: lots of updates. preliminary partitioning. extra packages works.
504
505 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
506 src/net/server/gliserv.py:
507 httpd now supports HTTPS and falls back to HTTP if not available
508 make fallback actually work
509 src/net/server/SecureXMLRPCServer.py:
510 SecureSocketServer is now threaded
511
512 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
513 src/net/client/gliclient.py:
514 try to use HTTPS for XMLRPC first and fallback to HTTP
515 pretend mode
516 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
517 HTTPS XMLRPC goodness from samyron
518 pass name of certificate
519
520 31 Oct 2005; Preston Cody <codeman@gentoo.org>
521 wegli: daemons and services screens done.
522
523 30 Oct 2005; Preston Cody <codeman@gentoo.org>
524 webgli: networking and users screens
525 added return_redirect to handler.py
526 loading and saving install/client profiles works for webgli now
527 Review also done
528
529 *GLI-0.2 (27 Oct 2005)
530
531 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
532 src/templates/x86ArchitectureTemplate.py:
533 properly check for bootloader emerge exist status with exitsuccess()
534 log output of grub install command
535 add --batch --no-floppy to grub command
536 grubinstallstring only gets logged if debug is on
537 src/GLIUtility.py:
538 update progress bar to 100% when process finishes
539
540 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
541 src/GLIClientController.py:
542 added debugging code for the interaction between the 2 threads via Event()
543 src/GLIUtility.py:
544 doubled the buffer size in spawn()
545 bump buffer size up to 16384
546 only report progress in 5% increments
547 src/GLIArchitectureTemplate.py:
548 kernelpkgs.txt support code
549 above disabled because it sucks
550 added add_pkg_to_world()
551
552 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/GLIArchitectureTemplate.py:
554 use tar | tar to copy files in copy_pkg_to_chroot()
555 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
556
557 23 Oct 2005; Preston Cody <codeman@gentoo.org>
558 DEBUGGING ADDED TO AT. verbose field added to CConfig.
559
560 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
561 src/net/server/gliserv.py:
562 / maps to index.html
563 look for actual files in html/
564 src/net/html:
565 new template
566 src/GLIUtility.py:
567 added parse_vdb_contents()
568 src/GLIArchitectureTemplate.py:
569 added copy_pkg_to_chroot()
570 added debug code to dynamic-stage3
571 switch dynamic-stage3 to new method
572 lots of bug fixes from adding debug code
573
574 22 Oct 2005; Preston Cody <codeman@gentoo.org>
575 webgli initial bootloader support + changed make.conf.
576 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
577
578 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
579 src/GLIUtility.py:
580 horrible tangled mess of code that is tarball unpacking subprogress display
581 add unpack progress to portage snapshot
582 use read() instead of readlines() in spawn()
583 only update progress bar for whole percents
584
585 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
586 src/templates/x86ArchitectureTemplate.py:
587 change call to 'grub' to use GLIUtility.exitsuccess()
588 add definition of 'build_mode' in _configure_lilo()
589 src/misc/updategtkfe, src/misc/updateglid:
590 fix so subshell is called in root shell
591
592 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
593 src/net/server/handlers/WebGLIHandler.py:
594 stage screen launches URI browser in sized window with various properties set
595
596 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
597 src/misc/updategtkfe:
598 updated to actually work
599 remove previous snapshot and extracted dir before downloading
600 src/misc/updateglid:
601 updated to actually work
602 src/templates/x86ArchitectureTemplate.py:
603 fixed bug where grub code was looking for 'root+root+file_name2'
604
605 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
606 src/net/server/handlers/WebGLIHandler.py:
607 URI browser
608 added mirror selection
609 src/GLIUtility.py:
610 ls via ssh strips off ending *
611
612 16 Oct 2005; Preston Cody <codeman@gentoo.org>
613 more updates to webgli. stage selection.
614
615 11 Oct 2005; Preston Cody <codeman@gentoo.org>
616 updated webgli with preliminary Network Mounts support.
617
618 9 Oct 2005; Preston Cody <codeman@gentoo.org>
619 GenDialog: string formatting and yes/no label fixes.
620 added WebGLI template for gliserv.py
621 added WebGLIHandler as well as a definition for it in gliserv.py
622 updates to the webgli files even though they won't be there for long.
623 Utility: remove exception for non-existant grppkgs.txt until the new livecd
624 goes public.
625
626 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
627 src/net/server/gliserv.py:
628 override dict to not be so anal
629 main server now loads separate module to handle requests
630 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
631 split out profile URLs into separate handler function
632 move handlers into subdirectory
633 add Welcome and Clients handlers
634
635 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
636 src/GLIUtility.py:
637 raise exception if password prompt received twice
638
639 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
640 src/GLIUtility.py:
641 removed rot13ify()
642
643 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
644 src/net/server/gliserv.py:
645 allow for param to be passed multiple times in GET
646 no XMLRPC functions return None
647 modify POST request parsing to only create a list if needed
648 fix GET request parsing so the list creation for multiple values works
649 src/net/client/gliclient.py:
650 various typo and type mismatch fixes
651 exit after exception
652
653 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
654 src/net/client/gliclient.py:
655 initial commit
656 pass MAC to XMLRPC functions
657 src/net/server/GLIServerProfile.py:
658 rename GLIClientsProfiles to GLIServerProfile
659
660 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
661 src/net/server/gliserv.py:
662 now handles POST requests
663 move majority of request handling code to common_handler() to reduce code
664 duplication
665 profile loading
666 client reg via XMLRPC goes into SharedInfo()
667 /showclients redesign
668 template fixes
669 allow handler functions to add/change headers
670 save profile
671
672 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
673 src/net/server/GLIClientsProfiles.py:
674 initial commit
675 src/net/server/template.html:
676 initial commit
677 src/net/server/gliserv.py:
678 add template mojo
679
680 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
681 src/net/server/gliserv.py:
682 XMLRPC mojo
683
684 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
685 src/GLIArchitectureTemplate.py:
686 add code in _edit_config() to comment line where variable is defined
687 previously
688 insert new line under previous definition of variable if it exists
689 small _edit_config() cleanup
690 src/GLIStorageDevice.py:
691 add clear_partitions() function
692 new sizes for recommended partition layout
693 automatically calculate swap size for recommended layout
694
695 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
696 src/templates/x86ArchitectureTemplate.py:
697 fat16 mojo
698
699 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
700 src/GLIStorageDevice.py:
701 prevent do_recommended() from being run twice
702 rewrite do_recommended() to be more robust
703 src/GLIArchitectureTemplate.py:
704 rework _edit_config() to not write duplicate entries
705
706 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
707 src/GLIStorageDevice.py:
708 added do_recommended() function to automatically created 256M/1G/* layout
709
710 17 Sep 2005; Preston Cody <codeman@gentoo.org>
711 src/gli-dialog.py: added set_distcc to the list
712 GenDialog: added set_distcc. untested.
713 IP: added install_distcc flag.
714 AT: added install_distcc function based on the flag. runs after build_kernel
715 changed AT spawn command for distcc for nodeps.
716
717 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
718 src/GLIUtility.py:
719 add rot13ify() function
720
721 16 Sep 2005; Preston Cody <codeman@gentoo.org>
722 src/GenDialog.py
723 added a sentence of text. unchecking support added.
724
725 15 Sep 2005; Preston Cody <codeman@gentoo.org>
726 src/GLIUtility.py
727 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
728 src/GenDialog.py
729 still working on extra_packages. transformed the list to new format.
730 added GRP indication to list. untested.
731 TODO lists updated.
732 src/fe/dialog/gli-dialog.py
733 spelling mistook.
734
735 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
736 src/GLIUtility.py:
737 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
738
739 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
740 src/GLIUtility.py:
741 add get_directory_listing_from_uri()
742 add http support to above
743 add ftp support to above
744 add scp support to above
745 src/GLIArchitectureTemplate.py:
746 "0" instead of 0 for key of single-element dict passed to _edit_config()
747
748 5 Sep 2005; Preston Cody <codeman@gentoo.org>
749 value_only -> only_value
750
751 3 Sep 2005; Preston Cody <codeman@gentoo.org>
752 gutted out all of etc_portage structure since it is now all handled by
753 etc_files
754
755 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
756 src/GLIArchitectureTemplate.py:
757 install_packages() sends progress update notifications
758 src/templates/x86ArchitectureTemplate.py:
759 increase sleep to 5s between format tries
760 src/GLIClientController.py:
761 pass 'self' to AT instead of 'self._pretend'
762
763 2 Sep 2005; Preston Cody <codeman@gentoo.org>
764 logger -> logger.log in x86AT
765
766 1 Sep 2005; Preston Cody <codeman@gentoo.org>
767 added set_etc_portage to IP. debugging gli-d's support for it.
768
769 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
770 src/templates/x86ArchitectureTemplate.py:
771 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
772
773 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
774 src/GLIArchitectureTemplate.py:
775 add _portage_best_version() function and rework install_packages() to allow
776 for future X of Y tracking
777 Use best_visible instead of best_version
778 tracked down and fixed missing = causing empty install extra packages
779 use = when emerging also
780 quickpkg hokey pokey
781 run _get_packages_to_emerge() again with -pk
782
783 22 Aug 2005; Preston Cody <codeman@gentoo.org>
784 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
785 the end of install_packages.
786 added updateglid to /src/misc
787 updated all core files with new GPL notice and copyright statement.
788
789 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
790 src/GLIUtility.py:
791 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
792 a snapshot in /mnt/cdrom/snapshots/
793 get_snapshot_from_cd() adds file:// at the beginning
794 change calls to extra package special case functions to 'self.blah'
795
796 21 Aug 2005; Preston Cody <codeman@gentoo.org>
797 src/ArchTemplate: changed "voodoo".
798 changed order of portage sync methods. made a fallback to webrsync if
799 normal emerge sync fails.
800 removed get_sources_from_cd because it is obsolete.
801 add special cases to install_packages. remove fatal exception on package
802 install failure b/c the box will still be bootable.
803 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
804 handled in the FEs.
805 src/GenDialog: added a bunch of code for dealing with x11-based packages.
806 awaiting testing.
807
808 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
809 src/GLIStorageDevice.py:
810 global try/except block around fs resizable detection code
811 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
812 install-failed cleanup function
813
814 18 Aug 2005; Preston Cody <codeman@gentoo.org>
815 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
816
817 16 Aug 2005; Preston Cody <codeman@gentoo.org>
818 GLIGenDialog:
819 add drive choices for loaded configs.
820 force snapshot for dynamic_stage3
821 init the snapshoturi input to the cd snapshot if not already selected.
822 if dynamic_stage3, skip the make.conf step.
823 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
824 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
825
826 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
827 src/GLIArchitectureTemplate.py:
828 manually call MAKEDEV in stage3-dynamic code
829 copy /etc/inittab.old to /etc/inittab in chroot
830 src/GLIUtility.py:
831 add beginning of validate_uri() function
832 add file:/// support to validate_uri()
833 single quotes when setting livecd password
834
835 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
836 src/GLIGenDialog.py:
837 change getmountpoint() to get_mountpoint()
838 src/misc/updategtkfe:
839 committed script to automatically download latest snapshot and run gtkfe
840 src/templates/x86ArchitectureTemplate.py:
841 fix _configure_lilo_add_windows() for IP -> GLISD stuff
842 src/GLIArchitectureTemplate.py:
843 give tmp_minor an initial value in mount_local_partitions so that the value
844 remain from the previous drive
845
846 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
847 src/templates/x86ArchitectureTemplate.py:
848 Fix _configure_lilo() for IP using GLISD stuff
849 src/GLIArchitectureTemplate.py:
850 install_cron_daemon() treats "none" specially
851
852 14 Aug 2005; Preston Cody <codeman@gentoo.org>
853 old patch from Steven Mertens to resolve bug #96642
854 numerous asthetic changes to GenDialog, no real functionality changes though.
855 strings renamed for global use if necessary.
856 fix all three parts of bug 102291
857 disable set_etc_portage until fully-written.
858
859 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
860 src/GLIClientController.py:
861 lower-case http/ftp proxy envvars
862
863 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
864 src/GLIClientController.py:
865 log end of pre_install steps to aid in debugging
866 src/templates/x86ArchitectureTemplate.py:
867 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
868
869 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
870 src/GLIArchitectureTemplate.py
871 check to make sure that the device node we're wait for to exist isn't of
872 type 'free'
873
874 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
875 src/GLIGenDialog.py:
876 convert install_packages to list in set_extra_packages()
877 check return code of checklist() call in "Manual" section
878 *actually* fix the first problem
879
880 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
881 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
882 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
883
884 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
885 src/GLIArchitectureTemplate.py:
886 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
887
888 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
889 Add CDATA support to SimpleXMLParser and add utility functions for it.
890
891 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
892 src/GLIArchitectureTemplate.py:
893 Fix case where vixie-cron is specified as a full package atom, as we still
894 don't want to run 'crontab /etc/crontab' for it.
895
896 *GLI-0.1 (3 Aug 2005)
897
898 30 Jul 2005; Preston Cody <codeman@gentoo.org>
899 add scp to list of is_uri() so GenDialog doesn't complain.
900 fixed livecd-kernel bug in bootloader code.
901 fixed gendialog for dynamic_stage3 instead of "networkless"
902 change bootloader to allow for both initrd and initramfs.
903 fix IP for dynamic_stage3.
904 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
905
906 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
907 Added full scp:// URI support to get_uri() in GLIUtility
908 Remove "networkless" from dynamic stage3 if locic.
909 Remove print statement from scp:// code.
910 Change scp code to check for "assword: " instead of "Password:"
911 Fix post-install network code to create net.eth1+ symlink correctly
912 Check to make sure pkg can be split on / and some debugging code
913 Add 2>dev/null to emerge call in _get_packages_to_emerge()
914 SimpleXMLParser handles True/False/None correctly now
915 Comment out above fix
916 Add partitioning wait-for-device-to-exist code to mount_local_partitions
917
918 28 Jul 2005; Scott Myron <samyron@gentoo.org>
919 Removed a FIXME in the GLIClientConfiguration that is no
920 longer needed.
921
922 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
923 Default to x86 in ClientConfig
924 Typo in build-a-stage3 code.
925 Remove MAKEDEV call in build-a-stage3 postscript.
926
927 26 Jul 2005; Preston Cody <codeman@gentoo.org>
928 Rewrote init of IP for gli-d. Other GenDialog updates.
929 allow network_type to be None in CConfig.
930
931 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
932 Add _dynamic_stage3 option to IP.
933 Add check for that option to dynamic stage3 code in ArchTemplate.
934 Fix code to determine default route in get_eth_info() in GLIUtility.
935 Fix serialization of dns-servers in ClientConfig.
936
937 24 Jul 2005; Preston Cody <codeman@gentoo.org>
938 changed default values of cron/logger in IP.
939 moved GenDialog IP init out to the individual files. gli-dialog's version
940 will change quite a bit.
941
942 22 Jul 2005; Preston Cody <codeman@gentoo.org>
943 added ppcArchTemplate. blank now. working on yaboot.
944 modified ArchTemplate for amd64 and ppc custom kernels.
945 skeleton implementation of _configure_yaboot.
946 small fixes to other templates.
947
948 21 Jul 2005; Preston Cody <codeman@gentoo.org>
949 GenDialog updates. changed comment in IP.
950
951 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
952 src/GLIInstallProfile.py:
953 Fix codeman's screwup of changing the service seperator to ',' in the parser
954 without changing it in the serialization code! Also document this in a
955 comment so you find it easier. Everybody needs to make sure they update
956 their install profiles!
957
958 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
959 src/GLIArchitectureTemplate.py:
960 Fix casting of list to string and concat of None with string, as well as
961 commented prototype of checking that mounting actually worked (found a case
962 where mount can return success, but the mount won't be done).
963
964 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
965 src/templates/x86ArchitectureTemplate.py:
966 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
967 checking for the device, and sleeping 1 second each time.
968
969 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
970 src/templates/x86ArchitectureTemplate.py:
971 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
972 bootloader works again. Also rename _install_{grub,lilo} to
973 _configure_{grub,lilo} since they don't install the loaders anymore
974 themselves.
975
976 7 Jul 2005; Preston Cody <codeman@gentoo.org>
977 fix global USE flags to not include the arch types at the end.
978 updates to GenDialog and gli-d.
979
980 6 Jul 2005; Preston Cody <codeman@gentoo.org>
981 fixing bootloader code for no initrd and initrd->initramfs naming change.
982
983 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
984 Proper comments and parameters to GLIException in install_mta()
985 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
986 Add strip() to list_mirrors(), list_subarch_from_mirror() and
987 list_tarball_from_mirror() to eliminate blank last item.
988
989 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
990 Added stage3 generation code.
991
992 5 Jul 2005; Preston Cody <codeman@gentoo.org>
993 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
994 Mild changes to GenDialog.
995
996 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
997 Remove separate install step configure_rc_conf() since it's handled by
998 update_config_files()
999 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1000 function is called twice on the same file.
1001
1002 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1003 Missing \ in sed in _get_packages_to_emerge()
1004 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1005 Check in _quickpkg_deps() to ignore blank package names returned from
1006 _get_packages_to_emerge()
1007
1008 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1009 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1010 in the dialog.py gauge code.
1011
1012 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1013 Add code to update_config_files() to go through etc_files and update stuff.
1014 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1015 Only use float() in partition xml parsing code if type == "free"
1016
1017 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1018 finished almost all internationalization of GenDialog.
1019 attempt at fixing rc.conf function. moved 3 generate functions out of
1020 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1021 added dialog.py to the fe/dialog directory so it actually gets used.
1022
1023 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1024 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1025
1026 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1027 fix extra entry in list_mirrors()
1028 beginning internationalization runthrough.
1029
1030 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1031 added dialog.py to /src temporarily until it gets accepted upstream.
1032 fix for unused value in form in dialog.py and changed heights.
1033 fix GenDialog forms.
1034
1035 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1036 Changed hostname/domainname for new baselayout.
1037 Changed _add_to_runlevel errors to logs.
1038 Updated TODO list to show status of GenDialog
1039 More updates to GenDialog including two checklists that probably won't work.
1040 update IP to use comma-separated list instead of space separated for services.
1041
1042 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1043 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1044 GenDialog as it gets closer to completion.
1045
1046 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1047 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1048 instead of int() in add_partition_device_partition() for minor (closes 96804)
1049
1050 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1051 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1052 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1053 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1054
1055 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1056 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1057 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1058 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1059 Fix undefined variable 'output' issue in spawn().
1060
1061 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1062 More updates to GenDialog and gli-d.
1063
1064 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1065 Modify list_mirrors() to return a list of mirror URL/name pairs.
1066
1067 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1068 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1069 get subarch.
1070
1071 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1072 Backend partitioning will create disklabel is none exists. Installprofile
1073 defaults to "" now instead of "msdos" for disklabel type. Fix for
1074 mount_local_partitions() to remember device along with minor in the
1075 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1076 add else block to log unsupported netmount types to mount_network_shares()
1077
1078 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1079 src/GLIArchitectureTemplate.py:
1080 Refactor kernel_compile common stuff, fix 2.4 build process.
1081 src/fe/cli/clife.py:
1082 Logging system.
1083 src/GLIUtility.py, src/GLIStorageDevice.py:
1084 Add comments about re-writes needed for boxes without sysfs.
1085
1086 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1087 src/GLIArchitectureTemplate.py:
1088 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1089 'make dep' call for custom compile. build_mode support for prepare-only and
1090 none types completed. custom compile function chains shell functions in
1091 spawned script, to allow for catching all errors.
1092
1093 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1094 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1095 and GenDialog. other gendialog updates as well. kernel updates untested.
1096
1097 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1098 src/GLIInstallProfile.py:
1099 Change structure of etc-portage stuff. The serialization was broken before my
1100 last commit, and I am the only person that's ever used it. The new schema is
1101 as follows:
1102 <etc-portage>
1103 <file name="package.mask"/>
1104 <file name="package.unmask">
1105 <entry atom="sys-kernel/openmosix-sources"/>
1106 </file>
1107 <file name="package.use">
1108 <entry atom="sys-libs/db">
1109 -java
1110 </entry>
1111 <entry atom="dev-libs/cyrus-sasl">
1112 -ldap
1113 </entry>
1114 </file>
1115 </etc-portage>
1116
1117
1118 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1119 src/GLIInstallProfile.py:
1120 Add new entry for gli-profile/kernel-build-method item. Add missing
1121 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1122 keys in the same order.
1123
1124 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125 src/GLIArchitectureTemplate.py:
1126 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1127 was repeatedly appended to make.conf.
1128
1129 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1130 src/GLIArchitectureTemplate.py:
1131 Put some Linux-2.6 specific code under a if statement. Store list of
1132 successfully mounted swap device for using swapoff. Add proper error checking
1133 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1134 'file'. Clean up some redundant code (thanks to pychecker).'
1135
1136 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1137 Fix typos: get_extended() instead of get_extended_partition(). Added
1138 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1139 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1140
1141 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1142 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1143 in add_network_interface.
1144
1145 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1146 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1147 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1148 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1149 prepare_chroot.
1150
1151 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1152 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1153 +src/fe/installer-gtk:
1154 Add new automated CLI frontend. Add scripts that are the intended means to
1155 use each frontend.
1156
1157 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1158 src/GLIClientController.py:
1159 Add null type to network config, for cases where the interface is already up
1160 and should not be touched (netboot for example).
1161
1162 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 src/GLIArchitectureTemplate.py:
1164 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1165 string!. Try to use binary packages if available by default.
1166
1167 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1168 src/GLIArchitectureTemplate.py:
1169 More error checking for _add_to_runlevel, to ensure that the init script
1170 actually exists before we try to add it. set_services phase must take place
1171 after the package installation, otherwise the init scripts might not exist.
1172 Find the correct init script for the cron and logging daemons, and add that
1173 instead of the package atom.
1174
1175 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1176 src/GLIArchitectureTemplate.py:
1177 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1178 usage of 'file' to 'contents' for the variable name, as it shadows
1179 __builtin__.file.
1180
1181 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1182 src/GLIArchitectureTemplate.py:
1183 Add MTA install code, and include MTA install phase. Ensure
1184 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1185 for 'none' kernel config for build_kernel phase. Put kernel_script in
1186 /var/tmp instead of /root for build_kernel phase.
1187
1188 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1189 Rename mta variables to match syslog/cron variables.
1190
1191 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1192 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1193 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1194 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1195 src/templates/.cvsignore, src/tests/.cvsignore:
1196 Refactor partition formatting again to include error checking. Allow 'none'
1197 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1198
1199 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1200 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1201 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1202 only have a single spawn call.
1203
1204 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1205 refixed samyron's fix of set_architecture_template.
1206
1207 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1209 be executable.
1210
1211 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1212 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1213 error checking when you call set_architecture_template.
1214
1215 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1216 moved the mkfsopts input to the partition options menu instead of the during
1217 the creation process. updated GenDialog to say it supports reiserfs v3.
1218
1219 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1220 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1221 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1222 Add support for other partition types to dialogfe.
1223 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1224 avoid integer overflows and wraparounds.
1225
1226 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1227 Removed start/end from XML output and added mkfsopts to partitioning info.
1228 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1229 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1230 in GLIClientConfiguration. Change from .1 and .9 to constants for
1231 partitioning. Fix free space overwriting bug. Remove a few unused functions
1232 from rewrite. Fix call to get_partition_at()
1233
1234 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1235 Updates to GenDialog and dialogfe.
1236
1237 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1239
1240 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1241 more GenDialog updates to partitioning.
1242
1243 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1244 Indenting issue in GLISD/get_ordered_partition_list.
1245 updates to GenDialog partitioning and added default UTC for timezone in IP.
1246
1247 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1248 Added GLISD.get_model()
1249
1250 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1251 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1252 More updates to GenDialog :)
1253
1254 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1255 Added get_interface_realname() function.
1256
1257 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1258 Added auto-save of CConfig and copying to new /root after install.
1259 yet even more GenDialog updates.
1260
1261 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1262 removed print statement from GLISD. more updates to GenDialog.
1263
1264 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1265 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1266 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1267 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1268 places in GLIClientConfiguration.
1269
1270 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1271 Fix mount_local_partitions(), configure_fstab(), and
1272 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1273 A few more fixes for templates/x86Archtemplate
1274
1275 27 May 2005; Preston Cody <codeman@gentoo.org>
1276 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1277 a work in progress.
1278
1279 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1280 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1281 directly. GLISD can now handle data imported from XML.
1282
1283 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1285 handle blank (no disklabel) disks.
1286
1287 20 May 2005; Preston Cody <codeman@gentoo.org>
1288 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1289 up, documented, and separated out serialization and grouped all sections.
1290
1291 19 May 2005; Preston Cody <codeman@gentoo.org>
1292 Reorganization of ClientConfiguration and gutting of unused functions.
1293 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1294
1295 18 May 2005; Preston Cody <codeman@gentoo.org>
1296 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1297
1298 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1299 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1300 partitioning. CC serializes install profile to disk and prepare_chroot()
1301 copies it into /mnt/gentoo/root
1302
1303 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Moved URI parsing into new function parse_uri()
1305
1306 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1307 Added XMLParser module.
1308
1309 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1310 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1311 Minor fix to is_uri() regex to allow hyphens in hostname.
1312
1313 12 May 2005; Preston Cody <codeman@gentoo.org>
1314 Updated finishing_cleanup for new unmounting method from agaffney.
1315
1316 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1317 Fix GLILogger to use correct time format string. Fix _edit_config() to
1318 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1319 unicode support to is_realstring().
1320
1321 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1323 return value instead of non-zero. Add code to output a traceback to the
1324 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1325 instead of --nocolor.
1326
1327 10 May 2005; Preston Cody <codeman@gentoo.org>
1328 Added GLIGenDialog.py to make a generic class for the dialog functions that
1329 can be used by both dialogfe and the netfe/be. updated both for new filename.
1330 date changes. 2004->2005.
1331
1332 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1333 Removed 'quiet=True' from spawn() calls
1334
1335 10 May 2005; Preston Cody <codeman@gentoo.org>
1336 Updated GLIUtility with patches from chotchki. Also added documentation
1337
1338 9 May 2005; Preston Cody <codeman@gentoo.org>
1339 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1340 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1341 from bug #89683, mostly touchups.
1342
1343 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1344 GLIStorageDevice cleanup patch from bug #91761
1345
1346 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1347 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1348 _edit_config(). Error logging casts 'error' to str
1349
1350 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Exceptions received in CC are logged before being passed to the FE. Added
1352 code to CC to handle exceptions *not* thrown by the installer itself.
1353
1354 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1355 get_max_mb_for_resize() returns -1 if not self.resizeable
1356
1357 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 More dirty rsync hacks :-/
1359
1360 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1361 Patches from chotchki (bug #90325) to improve CC networking. untested.
1362
1363 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1364 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1365 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1366 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1367 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1368 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1369 _get_packages_to_emerge()
1370
1371 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1372 Added group-adding code to set_users in ArchTemplate
1373
1374 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1375 Added post-install script code
1376
1377 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Fixed encapsulation issues in GLIClientController (bug #90141)
1379
1380 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 Update resizing code in GLIStorageDevice
1382
1383 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1384 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1385
1386 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 Reverted change to ArchTemplate and added support for commented line in old
1388 code.
1389
1390 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1391 Changed _edit_config() to modify value in-place instead of commenting out and
1392 adding the new value to the end of the file.
1393
1394 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1395 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1396 Also updated TODO list.
1397
1398 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 Use blackace's one-liner to add comments for all function for use with
1400 pythondoc.
1401
1402 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1403 Moved 'end >= device_sectors' check out of loop to check for next partition's
1404 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1405 Partitioning code now tracks start/end of extended for placing logicals. End
1406 point of logical is now adjusted along with start.
1407
1408 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1409 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1410 the way of partitioning from a blank disk. Add int() around access to minor
1411 key in partition information due to new partition code leaving them as float.
1412
1413 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1414 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1415
1416 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1417 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1418
1419 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1420 Added support for DHCP options and MAC addresses in the InstallProfile.
1421
1422 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1423 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1424 sed to properly strip out junk.
1425
1426 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1427 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1428 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1429
1430 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1431 Fixed indent problem in GLICController
1432
1433 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 Check for disklabel type "loop" and use the device name without a minor.
1435
1436 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1437 Remove /tmp/compile_output.log and /var/log/install.log when install is
1438 complete. Added code to (hopefully) keep 2nd thread running after install.
1439 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1440 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1441 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1442
1443 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1444 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1445 when unpacking tarball.
1446
1447 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1448 rewrote filesystem_tools. looks like it works so ripping out all the old
1449 filesystem_tools code.
1450
1451 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1452 Changed the print statements to logging in the partitioning BE code.
1453 the logger may need to be imported to the x86archtemplate. unknown yet.
1454 Added the finishing_cleanup function.
1455 added a fix to the logger from BenUrban
1456
1457 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1458 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1459 URIs. The blank uri check has been commented out.
1460 ripped out error checking of set_services. this is done by _add_to_runlevel.
1461
1462 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1463 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1464
1465 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1466 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1467 the install profile if available. Commented out spawn() debugging prints
1468
1469 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1470 small changes to setup_network_post. moved adding to runlevel of net.x to
1471 after the device gets symlinked. added domainname runlevel command.
1472
1473 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1474 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1475 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1476 spawn() call in livecd-kernel code to pass environment variables.
1477 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1478 the install profile if available.
1479
1480 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1481 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1482 to handle installing the livecd kernel into the new system.
1483
1484 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1485 should emerge hotplug and coldplug before adding them to runlevel.
1486
1487 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1488 took chroot out of grub_install command.
1489
1490 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1491 Changed chroot wrapper code in spawn() to write the wrapper the python way
1492 instead of the bash way to avoid quote conflicts. Added
1493 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1494 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1495 as it breaks the piping.
1496
1497 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1498 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1499
1500 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1502 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1503 GLIInstallProfile.
1504
1505 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1507 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1508 into /mnt/gentoo in prepare_chroot()
1509
1510 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1511 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1512 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1513 to start/end sectors
1514
1515 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1516 Add 2>&1 to cmd in spawn()
1517
1518 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1519 Modified GLIUtility.exitsuccess() to work with return value from
1520 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1521 creates wrapper script for commands run inside chroot so multiple commands
1522 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1523 for the generated script from spawn()
1524
1525 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1526 Removed default values for stage tarball URI and portage tree URI from
1527 InstallProfile. These should be set by the FEs. also added services step to
1528 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1529 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1530
1531 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1532 Small fix for setting the default gateway. Also added feature to dialogfe.
1533
1534 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1535 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1536
1537 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1538 Fixed a bunch of true -> True typos. lots of em
1539 only write new resolv.conf if there are dns servers listed.
1540
1541 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1542 Commented out 'display_on_tty8=True' in start_portmap()
1543
1544 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1545 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1546
1547 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1548 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1549 lang parameter to __init__()
1550
1551 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1552 updates to TODO list.
1553
1554 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1555 Initial code for quickpkg GRP support. Fix loop to grab packages from
1556 'emerge -p blah'
1557
1558 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1559 check for dhcp in the network stuff and emerge it if it is.
1560 added quickpkg to TODO list
1561
1562 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1563 Changed the raising of 'warning' exceptions to a simple log of the error
1564 so that the installer can continue.
1565
1566 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1567 Some big changes. First, changed most output to display_on_tty8.
1568 Second, added log lines to all templates. Some smaller fixes such as typos.
1569 Also did some cleanups of old commented lines.
1570
1571 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1572 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1573 Undo change with fix. Escaping fix in GLIStorageDevice.py
1574
1575 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1576 more updates to TODO list. hopefully we'll soon start removing items instead
1577 of adding them.
1578
1579 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1580 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1581
1582 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1583 updated TODO list. (again)
1584
1585 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1586 changed output of portmap start to display_on_tty8.
1587 fixed bootloader for udev and multiple kernels
1588 fixed custom kernel config (again)
1589
1590 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1591 changed default value of CC._enable_ssh to True because this is smart.
1592 added code to allow custom kernel .config. may be unstable and break. sorry.
1593
1594 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1595 partition() now waits until after it checks for partition flags before delete
1596 the partitions :P
1597
1598 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1599 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1600 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1601 blank.
1602
1603 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1604 Various fixes related to the add_users function. Still not yet finished.
1605 Added things to the TODO list. Lets start using that!
1606
1607 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1608 Added code to x86Template to format newly created partitions. Also added
1609 some error checking code. GLIStorageDevice passes 'minor' with data to
1610 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1611 mounting code.
1612
1613 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1614 Took out unnecessary setting of random livecd root password. the cd already
1615 sets it randomly.
1616
1617 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1618 Took out an unneeded step from CC's run()
1619
1620 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1621 Attempt at detecting and adding windows partitions to lilo.
1622
1623 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1624 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1625 partition. fixed misc exit_status => exitstatus typo.
1626
1627 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1628 Added basic code for resizing filesystems with pyparted. Fixed code for
1629 resizing ntfs and ext2/3.
1630
1631 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1632 Fixed partition() in x86Template so that it scans through logicals and deletes
1633 before deleting containing extended partition. Also clears partition table to
1634 be safe before third pass.
1635
1636 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1637 Added mount_network_shares. not able to test it from this computer.
1638 will test when i get back to school.
1639 also added start_portmap to the client_controller as an always-do.
1640 agaffney says this is needed for NFS mounts to work.
1641
1642 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1643 Partial rewrite of partitioning code in x86Template. No longer shells out to
1644 parted to perform actions, now uses all pyparted calls. Code "works" in a
1645 test, but still needs lots of TLC. Also modified tests/install.py to work
1646 with x86Template and GLIClientConfiguration.
1647
1648 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1649 Initial move of partitioning code from ArchTemplate to x86Template.
1650
1651 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1652 Added grp_install and services to InstallProfile. forgot about the set_root_password
1653
1654 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1655 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1656 Test Install ran very well (skipping partitioning).
1657
1658 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1659 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1660 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1661 some may still have eluded me.
1662
1663 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1664 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1665 Just finished mount_local_partitions in GLIArchitectureTemplate
1666
1667 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1668 Added get_num_sectors() to GLIStorageDevice.
1669
1670 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1671 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1672 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1673 from GLIInstallProfile.
1674
1675 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1676 GLIStorageDevice returns "unknown" instead of "" for get_type()
1677
1678 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1679 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1680 actually work. Commented out resizability checking code for speed.
1681
1682 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1683 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1684 GLIStorageDevice at the suggestion of plors
1685
1686 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1687 Added a function to GLIUtility to pull a value from a make.conf-style config
1688 file. Minor type fix to GLIInstallProfile.py
1689
1690 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1691 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1692 network mounts from partition data structure in GLIInstallProfile
1693
1694 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1695 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1696 can be resized.
1697
1698 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1699 Added some of the final functions to GLIInstallTemplate.
1700 Yes this project is still active despite rare use of the Changelog!
1701
1702 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1703 Added the GLIPartitionTools.py file. This is a temporary insertion of
1704 partitioning tools that will eventually go into their own package.
1705
1706 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1707 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1708 for the program). Added __init__(install_profile, client_configuration) to
1709 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1710 to avoid constantly passing stuff every time we call a method.
1711
1712 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1713
1714 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1715 files without messing up all the other stuff in them. This will be used for making
1716 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1717
1718 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1719
1720 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1721 have a few basic things. I added two private methods. One is _depends(). This
1722 will be used for dependency checking (ie. unpacking a tarball requires that
1723 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1724 same syntax as os.system(), however, instead of being run in the liveCD
1725 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1726 isolated the code. Hope to work more this week to get this class formed...
1727
1728 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1729
1730 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1731 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1732 to allow for easier modification (mutable, rather than immutable objects). Updated
1733 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1734 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1735 Added initial unit test code.
1736
1737 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1738
1739 Added initial changelog. Setting up the basic structure of the CVS repository
1740 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1741 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20