/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1470 - (show annotations) (download)
Sun Jun 25 22:24:28 2006 UTC (8 years, 6 months ago) by codeman
File size: 77746 byte(s)
  src/GLIGenDialog.py
  adding code to auto-add doscsi if a scsi drive detected.
  this code is also in the gtkfe already

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.657 2006/06/25 22:24:28 codeman Exp $
4
5 25 Jun 2006; Preston Cody <codeman@gentoo.org>
6 src/GLIGenDialog.py
7 adding code to auto-add doscsi if a scsi drive detected.
8 this code is also in the gtkfe already
9
10 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/GLIPortage.py:
12 pass proper PORTAGE_TMPDIR
13
14 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIUtility.py:
16 fix list_mirrors() to ignore <uri> lines that don't end on the same line
17
18 17 Jun 2006; Preston Cody <codeman@gentoo.org>
19 Added code to the mta step in AT to parse the install packages list and
20 look for mtas and if it finds it emerge it.
21 Initial attempt at moving extra_packages early in the setup to only show
22 local USE flags relating to those packages.
23 .. abandoned local USE project. no right way to do it.
24
25 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
26 src/GLIUtility.py:
27 minor tweak to regex for parsing mirrors.xml
28
29 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
30 src/templates/x86ArchitectureTemplate.py:
31 make use of strict_start and strict_end in partition recreation
32
33 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/templates/x86ArchitectureTemplate.py:
35 add strict_start and strict_end parameters to _add_partition()
36 add _find_current_minor_for_part() function to help with resizing
37 fix logical/extended logic in _partition_delete_step()
38 in _partition_resize_step(), delete, recreate at new size, resize, delete
39 call resize2fs with no size argument so it fills entire partition
40 more logging
41 only delete, recreate, resize, delete if growing
42 pass new size to resize2fs in K
43
44 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
45 src/GLIStorageDevice.py:
46 call reorder_minors() from tidy_partitions() instead of
47 set_partitions_from_disk()
48 add code to reorder_minors() to take extended/logical into consideration with
49 non-free partitions
50
51 30 Apr 2006; Preston Cody <codeman@gentoo.org>
52 added a check of the length of the directory in /usr/src if under 6 characters
53 should fix bug 131809
54
55 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIArchitectureTemplate.py:
57 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
58 and livecd-kernel
59
60 16 Apr 2006; Preston Cody <codeman@gentoo.org>
61 src/GLIGenDialog.py:
62 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
63
64 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIInstallProfile.py:
66 change kernel-modules to not be so stupid
67
68 9 Apr 2006; Preston Cody <codeman@gentoo.org>
69 GLIMD: fix display problem with execute.pyhtml.
70 make tables better.
71
72 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIInstallProfile.py:
74 fix handling of int/float for minor
75 src/templates/x86ArchitectureTemplate.py:
76 save/restore partition name
77 src/GLIStorageDevice.py:
78 support for partition name
79
80 8 Apr 2006; Preston Cody <codeman@gentoo.org>
81 touchups to add_profile in GLIMD to link to webgli
82 add a save to GLIMD profile button in webgli's saveprofile
83 gliserv.py:
84 initial attempt at custom networking info per client. hostname support only.
85
86 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
87 src/net/server/html/webgli/partitioning[234].pyhtml:
88 small fixes for new partioning code
89
90 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIClientController.py:
92 record PID of secondary thread
93
94 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIGenDialog.py:
96 small fix for new partitioning code
97
98 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIStorageDevice.py:
100 add get_devnode()
101 fix up detect_devices() to detect cciss/ida arrays
102 src/templates/x86ArchitectureTemplate.py:
103 use get_devnode() instead of figuring out the devnode
104 skip first 3 steps if partition layout hasn't changed
105 wipe disk and create new disklabel before recreating partitions
106 src/GLIArchitectureTemplate.py:
107 use get_devnode() in local mount and fstab stuff
108
109 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
110 src/GLIStorageDevice.py:
111 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
112
113 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
114 src/templates/x86ArchitectureTemplate.py:
115 continue breakup/cleanup of partitioning code
116
117 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
118 src/GLIStorageDevice.py:
119 set disklabel to default for arch when clearing the partition table
120 src/templates/x86ArchitectureTemplate.py:
121 complete rewrite of first and second passes
122
123 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
124 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
125 allow iterating over Device object to get partitions
126
127 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
128 src/GLIStorageDevice.py:
129 allow access to Device object like a dict
130
131 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
132 src/GLIStorageDevice.py:
133 allow access to Partition object like a dict
134
135 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
136 src/templates/x86ArchitectureTemplate.py:
137 fail if any filesystems are mounted on the device being partitioned
138
139 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
140 src/GLIStorageDevice.py:
141 reorder minor numbers when loading partitions from disk to match the physical
142 partition order
143
144 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
145 src/GLIStorageDevice.py:
146 overhaul for supporting mac disklabels and partitions out of disk order
147 remove free space from inside extended partition when extended is removed
148
149 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
150 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
151 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
152 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
153 Added bash scripts, icons, and desktop entries from the ebuild to make my
154 life easier.
155
156 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIStorageDevice.py:
158 raise an exception if the existing partitions are out of disk order
159 look for minors out of order instead of disk position
160
161 8 Mar 2006; Preston Cody <codeman@gentoo.org>
162 src/fe/dialog/gli-dialog and src/GLIGenDialog:
163 added networkless mode to gli-dialog.
164
165 6 Mar 2006; Preston Cody <codeman@gentoo.org>
166 src/templates/x86AT:
167 add windows detection code for grub. untested.
168
169 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py:
171 bootloader and partitioning external commands log to compile_output.log
172 wait for device node to exist before resizing
173 add -v to ntfsresize command
174 src/GLIStorageDevice.py:
175 return start/end with ip structure
176 pad min ntfs size by 50 MB just to be safe
177 src/GLIArchitectureTemplate.py:
178 only install filesystem tools for partitions with a mountpoint
179
180 5 Mar 2006; Preston Cody <codeman@gentoo.org>
181 add error catching and text to saving profile dialogs
182
183 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIPortage.py:
185 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
186 src/templates/x86ArchitectureTemplate.py:
187 fix checks for changed partitions so they will actually get deleted
188
189 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
190 src/GLIClientController.py:
191 slightly better error handling for pre-install failures
192
193 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
194 src/templates/x86ArchitectureTemplate.py:
195 proper return code checking for ext2/3 resizing
196
197 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIClientController.py:
199 accept 'none' as well as 'null' for network type
200 src/GLIArchitectureTemplate.py:
201 ignore extended partitions in mount_local_partitions()
202 src/templates/x86ArchitectureTemplate.py:
203 use get_ordered_partition_list() instead of keys().sort() for new_part_list
204 check to make sure start sector for primary isn't less than end sector for
205 previous extended
206 src/GLIClientController.py:
207 write dns servers to /etc/resolv.conf
208
209 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIPortage.py:
211 copy_pkg_to_chroot() uses compile_output.log for command output
212
213 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
214 only keep a 1000 line 'scrollback' buffer for the compile output and log file
215
216 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
217 src/GLIPortage.py:
218 add code make GLIPortage.py capable of being run stand-along for dynamic
219 stage3 generation and copying packages in a GRP-ish way
220 grp code fixups
221
222 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
223 src/GLIPortage.py:
224 ignore blank packages passed to get_deps() and emerge()
225
226 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIUtility.py:
228 add get_chosts() function
229
230 *GLI-0.3 (12 Feb 2006)
231
232 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
233 src/templates/x86ArchitectureTemplate.py:
234 pull old start/end sector values from somewhere that actually has them
235 add logic for extended partition to code that makes sure new end sector
236 doesn't overlap start sector of next partitions
237 don't freak out if partition can't be deleted
238
239 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIPortage.py:
241 run env-update at the end of copy_pkg_to_chroot()
242
243 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/templates/x86ArchitectureTemplate.py:
245 I'm a complete fscking dumbass. I recorded the end sector for partitions that
246 weren't being touched, but I never used it when recreating them...the end was
247 calculated from the size in MB instead :/
248
249 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
250 src/GLIArchitectureTemplate.py:
251 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
252 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
253 src/GLIPortage.py:
254 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
255 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
256 'resized' flag
257
258 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
259 src/GLIPortage.py:
260 short circuit and check vdb directly if package begins with '='
261
262 8 Feb 2006; Preston Cody <codeman@gentoo.org>
263 added more packages to extra_packages list in IP
264
265 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
266 src/templates/x86ArchitectureTemplate.py:
267 10 tries to create filesystem instead of 3
268 src/GLIPortage, src/GLIArchitectureTemplate.py:
269 ignore_missing flag for copy_pkg_to_chroot()
270
271 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
272 src/GLIPortage.py:
273 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
274
275 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
276 src/net/server/gliserv.py:
277 fix handling of 404 for real files
278 src/net/server/GLIServerProfile.py:
279 look for 'hostname' in attributes instead of 'name'
280
281 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
282 src/SimpleXMLParser.py:
283 initial support for 'include' in XML files
284 src/GLIStorageDevice.py:
285 initial support for %
286 src/GLIClientController.py:
287 add debugging statements to pre-install steps
288
289 15 Jan 2006; Preston Cody <codeman@gentoo.org>
290 webgli/configfiles:
291 check for key in etc_files['rc.conf'] to fix key error
292 webgli/timezone: small fix.
293 webgli/extrapackages: list-type fix
294 webgli/services: same
295 glimd: add/edit_client updates.
296
297 12 Jan 2006; Preston Cody <codeman@gentoo.org>
298 added configure.pyhtml to glimd. minor changes
299 to top and add_client. fixed up showargs.
300 added execute.pyhtml
301 changed register clients line in gliserv for name->hostname.
302 updated TODO.
303
304 10 Jan 2006; Preston Cody <codeman@gentoo.org>
305 src/net/server/*:
306 added add/del/edit client/profile.pythml for glimd.
307 updated templates, showclients, and gliserv.
308
309 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
310 src/net/server/*:
311 stupid threading module...
312
313 8 Jan 2006; Preston Cody <codeman@gentoo.org>
314 AT: rc.conf -> conf.d/clock
315
316 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
317 src/GLIPortage.py:
318 show 'Calculating dependencies for ...' in subprogress bar at beginning of
319 emerge()
320 src/GLIArchitectureTemplate.py:
321 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
322 in the chroot
323 remove _quickpkg_deps() and _portage_best_{visible,version}()
324 src/GLIUtility.py:
325 fail immediately in validate_uri() if provided URI can't be parsed
326 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
327 debug code in spawn()
328 use lower-level os.read() instead of file.read() because python sucks
329 src/templates/x86ArchitectureTemplate.py:
330 basic subprogress reporting for partitioning
331 total_steps was 1 too high
332
333 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
334 src/GLIUtility.py:
335 move parse_vdb_contents() to GLIPortage
336 src/GLIPortage.py:
337 remove all symlink fixups
338 ignore 'dir' entries in CONTENTS
339 call tar with -p
340
341 5 Jan 2006; Preston Cody <codeman@gentoo.org>
342 AT: bootsplash is now gensplash
343 gliserv: add advanced_mode to shared_info
344 webgli: Added advanced mode. mostly just disables a few screens.
345
346 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
347 src/GLIPortage.py:
348 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
349 added emerge()
350 update sub-progress after each package is emerged
351 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
352 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
353 remove link if it exists before moving content into place
354 src/GLIArchitectureTemplate.py:
355 install_packages() now calls emerge() in GLIPortage
356 change all calls to self._emerge() to self._portage.emerge()
357 comment out all emerge status checking...using exceptions now
358 call copy_pkg_to_chroot() directly for livecd-kernel
359
360 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
361 src/GLIArchitectureTemplate.py:
362 remove add_pkg_to_world() and copy_pkg_to_chroot()
363 copy installer.log to installer.log.failed on install failure
364 src/GLIUtility.py:
365 added get_keymaps()
366 spawn() takes any False argument for chroot instead of just None
367 src/GLIPortage.py:
368 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
369 change copy_pkg_to_chroot() to work properly with use_root=False
370 figure PORTAGE_TMPDIR properly
371
372 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
373 src/net/server/html/*:
374 converted showclients, load/saveprofile
375
376 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
377 src/GLIPortage.py:
378 exclude packages already in chroot vdb from binary deplist
379 chroot to use best_version for chroot's vdb
380 src/runtimedeps.py:
381 accept ROOT via commandline instead of env
382
383 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
384 src/runtimedeps.py:
385 remove passing of ROOT
386 src/GLIPortage.py:
387 modify get_deps() to get deptree for each package and merge into final list
388 remove depgraph class
389 add debugging code to get_deps()
390 src/GLIArchitectureTemplate.py:
391 combine code for GRP/compile in install_packages() into one block
392 debugging code in install_packages()
393
394 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
395 src/runtimedeps.py:
396 initial commit
397 src/GLIPortage.py:
398 use separate script for GRP deps
399 remove calls to portage module
400
401 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
402 src/GLIPortage.py:
403 initial commit
404 move some of portage function from GLIAT
405 flipped around a few function args
406 src/GLIArchitectureTemplate.py:
407 revamp install_packages() for new GLIPortage
408
409 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/GLIArchitectureTemplate.py:
411 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
412
413 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/net/server/gliserv.py:
415 wrap generated code in a class to isolate it a bit better
416 302 redirects work
417 don't use cgi.escape() for <% %>
418 src/net/server/html/webgli/*:
419 load/save profile
420 src/GLIUtility.py:
421 change /sbin/lspci to just lspci
422
423 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
424 src/GLIClientController.py:
425 change ordering of statements in CC run() while loop to not go past the end
426 of the array
427 src/GLIArchitectureTemplate.py:
428 removed redundant bind mounts
429
430 18 Dec 2005; Preston Cody <codeman@gentoo.org>
431 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
432 added a diagram by blackace from last night.
433 added the glossary in RTF format.
434
435 17 Dec 2005; Preston Cody <codeman@gentoo.org>
436 x86AT: separated out emerge/configure from running of bootloader
437 added MBR drive support to lilo.
438 these changes will likely not work.
439 AT: added setup_and_run_bootloader step.
440
441 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
442 src/net/server/gliserv.py:
443 call generated code in a function
444 src/net/server/html/webgli/*:
445 include top/bottom
446 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
447 src/GLIClientCongifuration.py:
448 install mode magic
449
450 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
451 src/GLIClientController.py:
452 use GLIException when there's an import problem
453 added debug code to show install_steps
454 src/templates/amd64ArchitectureTemplate.py:
455 add . to import path
456 proper path this time: ../../templates
457 src/GLIArchitectureTemplate.py:
458 add _portage_best_version() function
459
460 11 Dec 2005; Preston Cody <codeman@gentoo.org>
461 added initial glossary and gimli diagram to the docs directory.
462 modify gli-dialog to allow editing of the install_profile after loading XML.
463
464 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
465 src/net/server/html/webgli/:
466 converted globaluse, localuse, networkmounts, portagetree, and stageselection
467 moved saveclientconfig stuff into clientconfig
468 moved saveconfigfiles into config files
469 converted etc_portage and makedotconf
470 converted bootloader and kernel
471 convert daemons, extrapackages, networking, review, services, timezone, users
472 src/net/server/gliserv.py:
473 proper 404 handling for .pyhtml extension
474 HTML escape <% %> stuff
475 work around python's sucky regexes
476 src/GLIInstallProfile.py:
477 allow set_{rsync,ftp,http}_proxy() to accept empty values
478
479 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
480 src/net/server/gliserv.py:
481 initial commit of Legolas templating engine
482 302 redirects
483 src/net/server/html/index.html, src/net/server/webgli_template.html:
484 minor changes for new code
485 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
486 initial commit of the conversion from the monolithic WebGLIHandler.py to the
487 one file per path Legolas goodness
488 partitioning[2-4] done
489
490 5 Dec 2005; Preston Cody <codeman@gentoo.org>
491 webgli: dhcp options in CC and post-install.
492 updated comparison chart.
493 webgli: etc/portage/* and distcc support added. not too-well tested.
494
495 4 Dec 2005; Preston Cody <codeman@gentoo.org>
496 webgli_template.html: valign=top on left side.
497 webgli: fix bootloader boot_device. now working.
498 webgli: CC proxy done. post-install proxy in progress.
499
500 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
501 src/net/server/webgli_template.html:
502 increase padding for content cell to 7px and add colspan=2
503
504 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
505 webgli: added graphic bar on top
506 webgli: added hover effects on the links on the left
507 webgli: re-rendered header_bg.png to stretch without artifacts
508
509 3 Dec 2005; Preston Cody <codeman@gentoo.org>
510 webgli: make.conf disabling fixes for dynamic_stage3
511 fixed portage snapshot browse popup
512 all changes tested.
513 webgli: add debug mode to CC screen. the screen still needs lots of work.
514
515 1 Dec 2005; Preston Cody <codeman@gentoo.org>
516 added debug mode question to gli-dialog
517 added CC proxies to CC networking for gli-dialog
518 webgli: fixed skip CC networking if connection active
519 webgli: portage snapshot defaults to CD
520 webgli: bootloader mbr drive selection
521 webgli: USE flags unselectable if dynamic_stage3
522 webgli: manual extra packages and save button.
523
524 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
525 src/GLIUtility.py:
526 change ping count to 2
527 docs/comparison.html
528 initial commit
529
530 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
531 src/templates/x86ArchitectureTemplate.py:
532 fix map() issue with grub code
533 replace kernel_names and initrd_names loops with one-liners
534
535 27 Nov 2005; Preston Cody <codeman@gentoo.org>
536 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
537 initial gli-dialog support for recommended partitioning layout and clear.
538 failure cleanup now an option for gli-dialog.
539 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
540 added comparison list and updated TODO!
541
542 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
543 src/GLIArchitectureTemplate.py:
544 fix to stage1() debug code
545 fix to stage2() debug code
546
547 26 Nov 2005; Preston Cody <codeman@gentoo.org>
548 some more bootloader code fixes. forgot boot_device != mbr_device.
549
550 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
551 src/GLIStorageDevice.py:
552 fix to unallocated space merging when last one is after part 4
553
554 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
555 src/GLIArchitectureTemplate.py:
556 small fix to debugging code in copy_pkg_to_chroot()
557
558 23 Nov 2005; Preston Cody <codeman@gentoo.org>
559 more bugfixes with bootloader code
560 gli-dialog side appears to work
561
562 21 Nov 2005; Preston Cody <codeman@gentoo.org>
563 initial adding of boot_device to backend.
564 initial boot_device support added to gli-dialog.
565 some fixes of my poor coding
566
567 20 Nov 2005; Preston Cody <codeman@gentoo.org>
568 converted gli-dialog to use the install_package_list.
569 gtkfe has already been converted by AllanonJL
570 new way working in gli-dialog now and added to webgli.
571 added set/get_boot_device() to IP
572
573 19 Nov 2005; Preston Cody <codeman@gentoo.org>
574 get_install_package_list added to InstallProfile. This can be used by the FEs
575
576 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
577 src/templates/x86ArchitectureTemplate.py:
578 call ls with '-1 --color=no'
579
580 16 Nov 2005; Preston Cody <codeman@gentoo.org>
581 added warning (#9) to GRP ppl about stage3 tarballs
582
583 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
584 src/GLIArchitectureTemplate.py:
585 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
586 confused
587
588 13 Nov 2005; Preston Cody <codeman@gentoo.org>
589 removed protocols from rc.conf screens
590 finished initial rc.conf and make.conf in webgli
591
592 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
593 src/net/server/gliserv.py:
594 add -h option to usage()
595 show time and request URI in debug mode
596 show client IP in debug mode
597 just use IP instead of trying to do a reverse lookup
598
599 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
600 src/net/server/gliserv.py:
601 'classier' 401 message
602 proper commandline parsing
603 help via -h
604 user/pass can be specificed via commandline option
605
606 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/net/server/gliserv.py:
608 basic HTTP auth
609
610 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
611 src/net/server/gliserv.py:
612 dynamic module reloading (yipee!)
613 send 'Last-Modified' header for real files
614 respond to HEAD with just headers
615 src/net/server/handlers/WebGLIHandler.py:
616 icons for drives
617
618 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
619 src/net/server/handlers/WebGLIHandler.py:
620 initial 'pretty' partition table display support
621 clicking partition in 'pretty' display works instead of radio buttons
622 radio buttons and pretty display work together
623 META redirect instead of javascript
624 pretty display stretches across entire screen
625 'Recommended layout' and 'Clear drive' functions
626 properly catch exceptions from do_recommended()
627 src/GLIArchitectureTemplate.py:
628 replace preinst, copy, postinst, rm steps with qmerge
629 whoops...that shouldn't have been commented out
630 create image_dir with -p in copy_pkg_to_chroot()
631 more generic of symlink crappiness
632 new copy_pkg_to_chroot() actually works now
633
634 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
635 src/GLIStorageDevice.py:
636 initial generic disk support
637 fixes for add_partition() code
638 src/net/server/handlers/WebGLIHandler.py:
639 added support for creating generic disks
640 add new partition working
641 save and delete partitions
642
643 6 Nov 2005; Preston Cody <codeman@gentoo.org>
644 webgli: Partitioning making progress.
645
646 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
647 src/GLIArchitectureTemplate.py:
648 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
649 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
650 dir) and works around /etc/gconf symlink problem
651
652 5 Nov 2005; Preston Cody <codeman@gentoo.org>
653 webgli: lots of updates. preliminary partitioning. extra packages works.
654
655 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
656 src/net/server/gliserv.py:
657 httpd now supports HTTPS and falls back to HTTP if not available
658 make fallback actually work
659 src/net/server/SecureXMLRPCServer.py:
660 SecureSocketServer is now threaded
661
662 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
663 src/net/client/gliclient.py:
664 try to use HTTPS for XMLRPC first and fallback to HTTP
665 pretend mode
666 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
667 HTTPS XMLRPC goodness from samyron
668 pass name of certificate
669
670 31 Oct 2005; Preston Cody <codeman@gentoo.org>
671 wegli: daemons and services screens done.
672
673 30 Oct 2005; Preston Cody <codeman@gentoo.org>
674 webgli: networking and users screens
675 added return_redirect to handler.py
676 loading and saving install/client profiles works for webgli now
677 Review also done
678
679 *GLI-0.2 (27 Oct 2005)
680
681 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
682 src/templates/x86ArchitectureTemplate.py:
683 properly check for bootloader emerge exist status with exitsuccess()
684 log output of grub install command
685 add --batch --no-floppy to grub command
686 grubinstallstring only gets logged if debug is on
687 src/GLIUtility.py:
688 update progress bar to 100% when process finishes
689
690 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
691 src/GLIClientController.py:
692 added debugging code for the interaction between the 2 threads via Event()
693 src/GLIUtility.py:
694 doubled the buffer size in spawn()
695 bump buffer size up to 16384
696 only report progress in 5% increments
697 src/GLIArchitectureTemplate.py:
698 kernelpkgs.txt support code
699 above disabled because it sucks
700 added add_pkg_to_world()
701
702 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
703 src/GLIArchitectureTemplate.py:
704 use tar | tar to copy files in copy_pkg_to_chroot()
705 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
706
707 23 Oct 2005; Preston Cody <codeman@gentoo.org>
708 DEBUGGING ADDED TO AT. verbose field added to CConfig.
709
710 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
711 src/net/server/gliserv.py:
712 / maps to index.html
713 look for actual files in html/
714 src/net/html:
715 new template
716 src/GLIUtility.py:
717 added parse_vdb_contents()
718 src/GLIArchitectureTemplate.py:
719 added copy_pkg_to_chroot()
720 added debug code to dynamic-stage3
721 switch dynamic-stage3 to new method
722 lots of bug fixes from adding debug code
723
724 22 Oct 2005; Preston Cody <codeman@gentoo.org>
725 webgli initial bootloader support + changed make.conf.
726 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
727
728 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
729 src/GLIUtility.py:
730 horrible tangled mess of code that is tarball unpacking subprogress display
731 add unpack progress to portage snapshot
732 use read() instead of readlines() in spawn()
733 only update progress bar for whole percents
734
735 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
736 src/templates/x86ArchitectureTemplate.py:
737 change call to 'grub' to use GLIUtility.exitsuccess()
738 add definition of 'build_mode' in _configure_lilo()
739 src/misc/updategtkfe, src/misc/updateglid:
740 fix so subshell is called in root shell
741
742 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
743 src/net/server/handlers/WebGLIHandler.py:
744 stage screen launches URI browser in sized window with various properties set
745
746 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
747 src/misc/updategtkfe:
748 updated to actually work
749 remove previous snapshot and extracted dir before downloading
750 src/misc/updateglid:
751 updated to actually work
752 src/templates/x86ArchitectureTemplate.py:
753 fixed bug where grub code was looking for 'root+root+file_name2'
754
755 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
756 src/net/server/handlers/WebGLIHandler.py:
757 URI browser
758 added mirror selection
759 src/GLIUtility.py:
760 ls via ssh strips off ending *
761
762 16 Oct 2005; Preston Cody <codeman@gentoo.org>
763 more updates to webgli. stage selection.
764
765 11 Oct 2005; Preston Cody <codeman@gentoo.org>
766 updated webgli with preliminary Network Mounts support.
767
768 9 Oct 2005; Preston Cody <codeman@gentoo.org>
769 GenDialog: string formatting and yes/no label fixes.
770 added WebGLI template for gliserv.py
771 added WebGLIHandler as well as a definition for it in gliserv.py
772 updates to the webgli files even though they won't be there for long.
773 Utility: remove exception for non-existant grppkgs.txt until the new livecd
774 goes public.
775
776 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
777 src/net/server/gliserv.py:
778 override dict to not be so anal
779 main server now loads separate module to handle requests
780 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
781 split out profile URLs into separate handler function
782 move handlers into subdirectory
783 add Welcome and Clients handlers
784
785 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
786 src/GLIUtility.py:
787 raise exception if password prompt received twice
788
789 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
790 src/GLIUtility.py:
791 removed rot13ify()
792
793 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/net/server/gliserv.py:
795 allow for param to be passed multiple times in GET
796 no XMLRPC functions return None
797 modify POST request parsing to only create a list if needed
798 fix GET request parsing so the list creation for multiple values works
799 src/net/client/gliclient.py:
800 various typo and type mismatch fixes
801 exit after exception
802
803 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
804 src/net/client/gliclient.py:
805 initial commit
806 pass MAC to XMLRPC functions
807 src/net/server/GLIServerProfile.py:
808 rename GLIClientsProfiles to GLIServerProfile
809
810 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
811 src/net/server/gliserv.py:
812 now handles POST requests
813 move majority of request handling code to common_handler() to reduce code
814 duplication
815 profile loading
816 client reg via XMLRPC goes into SharedInfo()
817 /showclients redesign
818 template fixes
819 allow handler functions to add/change headers
820 save profile
821
822 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
823 src/net/server/GLIClientsProfiles.py:
824 initial commit
825 src/net/server/template.html:
826 initial commit
827 src/net/server/gliserv.py:
828 add template mojo
829
830 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
831 src/net/server/gliserv.py:
832 XMLRPC mojo
833
834 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
835 src/GLIArchitectureTemplate.py:
836 add code in _edit_config() to comment line where variable is defined
837 previously
838 insert new line under previous definition of variable if it exists
839 small _edit_config() cleanup
840 src/GLIStorageDevice.py:
841 add clear_partitions() function
842 new sizes for recommended partition layout
843 automatically calculate swap size for recommended layout
844
845 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
846 src/templates/x86ArchitectureTemplate.py:
847 fat16 mojo
848
849 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
850 src/GLIStorageDevice.py:
851 prevent do_recommended() from being run twice
852 rewrite do_recommended() to be more robust
853 src/GLIArchitectureTemplate.py:
854 rework _edit_config() to not write duplicate entries
855
856 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
857 src/GLIStorageDevice.py:
858 added do_recommended() function to automatically created 256M/1G/* layout
859
860 17 Sep 2005; Preston Cody <codeman@gentoo.org>
861 src/gli-dialog.py: added set_distcc to the list
862 GenDialog: added set_distcc. untested.
863 IP: added install_distcc flag.
864 AT: added install_distcc function based on the flag. runs after build_kernel
865 changed AT spawn command for distcc for nodeps.
866
867 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
868 src/GLIUtility.py:
869 add rot13ify() function
870
871 16 Sep 2005; Preston Cody <codeman@gentoo.org>
872 src/GenDialog.py
873 added a sentence of text. unchecking support added.
874
875 15 Sep 2005; Preston Cody <codeman@gentoo.org>
876 src/GLIUtility.py
877 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
878 src/GenDialog.py
879 still working on extra_packages. transformed the list to new format.
880 added GRP indication to list. untested.
881 TODO lists updated.
882 src/fe/dialog/gli-dialog.py
883 spelling mistook.
884
885 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
886 src/GLIUtility.py:
887 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
888
889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
890 src/GLIUtility.py:
891 add get_directory_listing_from_uri()
892 add http support to above
893 add ftp support to above
894 add scp support to above
895 src/GLIArchitectureTemplate.py:
896 "0" instead of 0 for key of single-element dict passed to _edit_config()
897
898 5 Sep 2005; Preston Cody <codeman@gentoo.org>
899 value_only -> only_value
900
901 3 Sep 2005; Preston Cody <codeman@gentoo.org>
902 gutted out all of etc_portage structure since it is now all handled by
903 etc_files
904
905 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
906 src/GLIArchitectureTemplate.py:
907 install_packages() sends progress update notifications
908 src/templates/x86ArchitectureTemplate.py:
909 increase sleep to 5s between format tries
910 src/GLIClientController.py:
911 pass 'self' to AT instead of 'self._pretend'
912
913 2 Sep 2005; Preston Cody <codeman@gentoo.org>
914 logger -> logger.log in x86AT
915
916 1 Sep 2005; Preston Cody <codeman@gentoo.org>
917 added set_etc_portage to IP. debugging gli-d's support for it.
918
919 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
920 src/templates/x86ArchitectureTemplate.py:
921 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
922
923 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
924 src/GLIArchitectureTemplate.py:
925 add _portage_best_version() function and rework install_packages() to allow
926 for future X of Y tracking
927 Use best_visible instead of best_version
928 tracked down and fixed missing = causing empty install extra packages
929 use = when emerging also
930 quickpkg hokey pokey
931 run _get_packages_to_emerge() again with -pk
932
933 22 Aug 2005; Preston Cody <codeman@gentoo.org>
934 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
935 the end of install_packages.
936 added updateglid to /src/misc
937 updated all core files with new GPL notice and copyright statement.
938
939 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
940 src/GLIUtility.py:
941 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
942 a snapshot in /mnt/cdrom/snapshots/
943 get_snapshot_from_cd() adds file:// at the beginning
944 change calls to extra package special case functions to 'self.blah'
945
946 21 Aug 2005; Preston Cody <codeman@gentoo.org>
947 src/ArchTemplate: changed "voodoo".
948 changed order of portage sync methods. made a fallback to webrsync if
949 normal emerge sync fails.
950 removed get_sources_from_cd because it is obsolete.
951 add special cases to install_packages. remove fatal exception on package
952 install failure b/c the box will still be bootable.
953 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
954 handled in the FEs.
955 src/GenDialog: added a bunch of code for dealing with x11-based packages.
956 awaiting testing.
957
958 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
959 src/GLIStorageDevice.py:
960 global try/except block around fs resizable detection code
961 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
962 install-failed cleanup function
963
964 18 Aug 2005; Preston Cody <codeman@gentoo.org>
965 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
966
967 16 Aug 2005; Preston Cody <codeman@gentoo.org>
968 GLIGenDialog:
969 add drive choices for loaded configs.
970 force snapshot for dynamic_stage3
971 init the snapshoturi input to the cd snapshot if not already selected.
972 if dynamic_stage3, skip the make.conf step.
973 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
974 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
975
976 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
977 src/GLIArchitectureTemplate.py:
978 manually call MAKEDEV in stage3-dynamic code
979 copy /etc/inittab.old to /etc/inittab in chroot
980 src/GLIUtility.py:
981 add beginning of validate_uri() function
982 add file:/// support to validate_uri()
983 single quotes when setting livecd password
984
985 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
986 src/GLIGenDialog.py:
987 change getmountpoint() to get_mountpoint()
988 src/misc/updategtkfe:
989 committed script to automatically download latest snapshot and run gtkfe
990 src/templates/x86ArchitectureTemplate.py:
991 fix _configure_lilo_add_windows() for IP -> GLISD stuff
992 src/GLIArchitectureTemplate.py:
993 give tmp_minor an initial value in mount_local_partitions so that the value
994 remain from the previous drive
995
996 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
997 src/templates/x86ArchitectureTemplate.py:
998 Fix _configure_lilo() for IP using GLISD stuff
999 src/GLIArchitectureTemplate.py:
1000 install_cron_daemon() treats "none" specially
1001
1002 14 Aug 2005; Preston Cody <codeman@gentoo.org>
1003 old patch from Steven Mertens to resolve bug #96642
1004 numerous asthetic changes to GenDialog, no real functionality changes though.
1005 strings renamed for global use if necessary.
1006 fix all three parts of bug 102291
1007 disable set_etc_portage until fully-written.
1008
1009 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1010 src/GLIClientController.py:
1011 lower-case http/ftp proxy envvars
1012
1013 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1014 src/GLIClientController.py:
1015 log end of pre_install steps to aid in debugging
1016 src/templates/x86ArchitectureTemplate.py:
1017 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1018
1019 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1020 src/GLIArchitectureTemplate.py
1021 check to make sure that the device node we're wait for to exist isn't of
1022 type 'free'
1023
1024 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1025 src/GLIGenDialog.py:
1026 convert install_packages to list in set_extra_packages()
1027 check return code of checklist() call in "Manual" section
1028 *actually* fix the first problem
1029
1030 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1031 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1032 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1033
1034 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1035 src/GLIArchitectureTemplate.py:
1036 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1037
1038 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1039 Add CDATA support to SimpleXMLParser and add utility functions for it.
1040
1041 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1042 src/GLIArchitectureTemplate.py:
1043 Fix case where vixie-cron is specified as a full package atom, as we still
1044 don't want to run 'crontab /etc/crontab' for it.
1045
1046 *GLI-0.1 (3 Aug 2005)
1047
1048 30 Jul 2005; Preston Cody <codeman@gentoo.org>
1049 add scp to list of is_uri() so GenDialog doesn't complain.
1050 fixed livecd-kernel bug in bootloader code.
1051 fixed gendialog for dynamic_stage3 instead of "networkless"
1052 change bootloader to allow for both initrd and initramfs.
1053 fix IP for dynamic_stage3.
1054 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1055
1056 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1057 Added full scp:// URI support to get_uri() in GLIUtility
1058 Remove "networkless" from dynamic stage3 if locic.
1059 Remove print statement from scp:// code.
1060 Change scp code to check for "assword: " instead of "Password:"
1061 Fix post-install network code to create net.eth1+ symlink correctly
1062 Check to make sure pkg can be split on / and some debugging code
1063 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1064 SimpleXMLParser handles True/False/None correctly now
1065 Comment out above fix
1066 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1067
1068 28 Jul 2005; Scott Myron <samyron@gentoo.org>
1069 Removed a FIXME in the GLIClientConfiguration that is no
1070 longer needed.
1071
1072 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1073 Default to x86 in ClientConfig
1074 Typo in build-a-stage3 code.
1075 Remove MAKEDEV call in build-a-stage3 postscript.
1076
1077 26 Jul 2005; Preston Cody <codeman@gentoo.org>
1078 Rewrote init of IP for gli-d. Other GenDialog updates.
1079 allow network_type to be None in CConfig.
1080
1081 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1082 Add _dynamic_stage3 option to IP.
1083 Add check for that option to dynamic stage3 code in ArchTemplate.
1084 Fix code to determine default route in get_eth_info() in GLIUtility.
1085 Fix serialization of dns-servers in ClientConfig.
1086
1087 24 Jul 2005; Preston Cody <codeman@gentoo.org>
1088 changed default values of cron/logger in IP.
1089 moved GenDialog IP init out to the individual files. gli-dialog's version
1090 will change quite a bit.
1091
1092 22 Jul 2005; Preston Cody <codeman@gentoo.org>
1093 added ppcArchTemplate. blank now. working on yaboot.
1094 modified ArchTemplate for amd64 and ppc custom kernels.
1095 skeleton implementation of _configure_yaboot.
1096 small fixes to other templates.
1097
1098 21 Jul 2005; Preston Cody <codeman@gentoo.org>
1099 GenDialog updates. changed comment in IP.
1100
1101 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1102 src/GLIInstallProfile.py:
1103 Fix codeman's screwup of changing the service seperator to ',' in the parser
1104 without changing it in the serialization code! Also document this in a
1105 comment so you find it easier. Everybody needs to make sure they update
1106 their install profiles!
1107
1108 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1109 src/GLIArchitectureTemplate.py:
1110 Fix casting of list to string and concat of None with string, as well as
1111 commented prototype of checking that mounting actually worked (found a case
1112 where mount can return success, but the mount won't be done).
1113
1114 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1115 src/templates/x86ArchitectureTemplate.py:
1116 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1117 checking for the device, and sleeping 1 second each time.
1118
1119 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1120 src/templates/x86ArchitectureTemplate.py:
1121 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1122 bootloader works again. Also rename _install_{grub,lilo} to
1123 _configure_{grub,lilo} since they don't install the loaders anymore
1124 themselves.
1125
1126 7 Jul 2005; Preston Cody <codeman@gentoo.org>
1127 fix global USE flags to not include the arch types at the end.
1128 updates to GenDialog and gli-d.
1129
1130 6 Jul 2005; Preston Cody <codeman@gentoo.org>
1131 fixing bootloader code for no initrd and initrd->initramfs naming change.
1132
1133 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 Proper comments and parameters to GLIException in install_mta()
1135 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1136 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1137 list_tarball_from_mirror() to eliminate blank last item.
1138
1139 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1140 Added stage3 generation code.
1141
1142 5 Jul 2005; Preston Cody <codeman@gentoo.org>
1143 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1144 Mild changes to GenDialog.
1145
1146 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1147 Remove separate install step configure_rc_conf() since it's handled by
1148 update_config_files()
1149 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1150 function is called twice on the same file.
1151
1152 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1153 Missing \ in sed in _get_packages_to_emerge()
1154 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1155 Check in _quickpkg_deps() to ignore blank package names returned from
1156 _get_packages_to_emerge()
1157
1158 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1159 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1160 in the dialog.py gauge code.
1161
1162 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1163 Add code to update_config_files() to go through etc_files and update stuff.
1164 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1165 Only use float() in partition xml parsing code if type == "free"
1166
1167 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1168 finished almost all internationalization of GenDialog.
1169 attempt at fixing rc.conf function. moved 3 generate functions out of
1170 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1171 added dialog.py to the fe/dialog directory so it actually gets used.
1172
1173 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1174 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1175
1176 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1177 fix extra entry in list_mirrors()
1178 beginning internationalization runthrough.
1179
1180 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1181 added dialog.py to /src temporarily until it gets accepted upstream.
1182 fix for unused value in form in dialog.py and changed heights.
1183 fix GenDialog forms.
1184
1185 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1186 Changed hostname/domainname for new baselayout.
1187 Changed _add_to_runlevel errors to logs.
1188 Updated TODO list to show status of GenDialog
1189 More updates to GenDialog including two checklists that probably won't work.
1190 update IP to use comma-separated list instead of space separated for services.
1191
1192 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1193 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1194 GenDialog as it gets closer to completion.
1195
1196 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1197 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1198 instead of int() in add_partition_device_partition() for minor (closes 96804)
1199
1200 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1202 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1203 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1204
1205 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1206 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1207 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1208 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1209 Fix undefined variable 'output' issue in spawn().
1210
1211 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1212 More updates to GenDialog and gli-d.
1213
1214 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1215 Modify list_mirrors() to return a list of mirror URL/name pairs.
1216
1217 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1218 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1219 get subarch.
1220
1221 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Backend partitioning will create disklabel is none exists. Installprofile
1223 defaults to "" now instead of "msdos" for disklabel type. Fix for
1224 mount_local_partitions() to remember device along with minor in the
1225 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1226 add else block to log unsupported netmount types to mount_network_shares()
1227
1228 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1229 src/GLIArchitectureTemplate.py:
1230 Refactor kernel_compile common stuff, fix 2.4 build process.
1231 src/fe/cli/clife.py:
1232 Logging system.
1233 src/GLIUtility.py, src/GLIStorageDevice.py:
1234 Add comments about re-writes needed for boxes without sysfs.
1235
1236 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1237 src/GLIArchitectureTemplate.py:
1238 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1239 'make dep' call for custom compile. build_mode support for prepare-only and
1240 none types completed. custom compile function chains shell functions in
1241 spawned script, to allow for catching all errors.
1242
1243 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1244 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1245 and GenDialog. other gendialog updates as well. kernel updates untested.
1246
1247 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1248 src/GLIInstallProfile.py:
1249 Change structure of etc-portage stuff. The serialization was broken before my
1250 last commit, and I am the only person that's ever used it. The new schema is
1251 as follows:
1252 <etc-portage>
1253 <file name="package.mask"/>
1254 <file name="package.unmask">
1255 <entry atom="sys-kernel/openmosix-sources"/>
1256 </file>
1257 <file name="package.use">
1258 <entry atom="sys-libs/db">
1259 -java
1260 </entry>
1261 <entry atom="dev-libs/cyrus-sasl">
1262 -ldap
1263 </entry>
1264 </file>
1265 </etc-portage>
1266
1267
1268 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1269 src/GLIInstallProfile.py:
1270 Add new entry for gli-profile/kernel-build-method item. Add missing
1271 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1272 keys in the same order.
1273
1274 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1275 src/GLIArchitectureTemplate.py:
1276 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1277 was repeatedly appended to make.conf.
1278
1279 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1280 src/GLIArchitectureTemplate.py:
1281 Put some Linux-2.6 specific code under a if statement. Store list of
1282 successfully mounted swap device for using swapoff. Add proper error checking
1283 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1284 'file'. Clean up some redundant code (thanks to pychecker).'
1285
1286 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1287 Fix typos: get_extended() instead of get_extended_partition(). Added
1288 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1289 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1290
1291 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1292 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1293 in add_network_interface.
1294
1295 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1296 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1297 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1298 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1299 prepare_chroot.
1300
1301 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1302 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1303 +src/fe/installer-gtk:
1304 Add new automated CLI frontend. Add scripts that are the intended means to
1305 use each frontend.
1306
1307 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1308 src/GLIClientController.py:
1309 Add null type to network config, for cases where the interface is already up
1310 and should not be touched (netboot for example).
1311
1312 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1313 src/GLIArchitectureTemplate.py:
1314 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1315 string!. Try to use binary packages if available by default.
1316
1317 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1318 src/GLIArchitectureTemplate.py:
1319 More error checking for _add_to_runlevel, to ensure that the init script
1320 actually exists before we try to add it. set_services phase must take place
1321 after the package installation, otherwise the init scripts might not exist.
1322 Find the correct init script for the cron and logging daemons, and add that
1323 instead of the package atom.
1324
1325 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1326 src/GLIArchitectureTemplate.py:
1327 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1328 usage of 'file' to 'contents' for the variable name, as it shadows
1329 __builtin__.file.
1330
1331 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1332 src/GLIArchitectureTemplate.py:
1333 Add MTA install code, and include MTA install phase. Ensure
1334 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1335 for 'none' kernel config for build_kernel phase. Put kernel_script in
1336 /var/tmp instead of /root for build_kernel phase.
1337
1338 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1339 Rename mta variables to match syslog/cron variables.
1340
1341 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1342 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1343 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1344 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1345 src/templates/.cvsignore, src/tests/.cvsignore:
1346 Refactor partition formatting again to include error checking. Allow 'none'
1347 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1348
1349 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1350 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1351 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1352 only have a single spawn call.
1353
1354 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1355 refixed samyron's fix of set_architecture_template.
1356
1357 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1359 be executable.
1360
1361 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1362 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1363 error checking when you call set_architecture_template.
1364
1365 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1366 moved the mkfsopts input to the partition options menu instead of the during
1367 the creation process. updated GenDialog to say it supports reiserfs v3.
1368
1369 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1370 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1371 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1372 Add support for other partition types to dialogfe.
1373 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1374 avoid integer overflows and wraparounds.
1375
1376 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1377 Removed start/end from XML output and added mkfsopts to partitioning info.
1378 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1379 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1380 in GLIClientConfiguration. Change from .1 and .9 to constants for
1381 partitioning. Fix free space overwriting bug. Remove a few unused functions
1382 from rewrite. Fix call to get_partition_at()
1383
1384 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1385 Updates to GenDialog and dialogfe.
1386
1387 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1389
1390 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1391 more GenDialog updates to partitioning.
1392
1393 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1394 Indenting issue in GLISD/get_ordered_partition_list.
1395 updates to GenDialog partitioning and added default UTC for timezone in IP.
1396
1397 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Added GLISD.get_model()
1399
1400 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1401 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1402 More updates to GenDialog :)
1403
1404 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1405 Added get_interface_realname() function.
1406
1407 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1408 Added auto-save of CConfig and copying to new /root after install.
1409 yet even more GenDialog updates.
1410
1411 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1412 removed print statement from GLISD. more updates to GenDialog.
1413
1414 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1416 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1417 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1418 places in GLIClientConfiguration.
1419
1420 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1421 Fix mount_local_partitions(), configure_fstab(), and
1422 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1423 A few more fixes for templates/x86Archtemplate
1424
1425 27 May 2005; Preston Cody <codeman@gentoo.org>
1426 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1427 a work in progress.
1428
1429 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1430 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1431 directly. GLISD can now handle data imported from XML.
1432
1433 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1435 handle blank (no disklabel) disks.
1436
1437 20 May 2005; Preston Cody <codeman@gentoo.org>
1438 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1439 up, documented, and separated out serialization and grouped all sections.
1440
1441 19 May 2005; Preston Cody <codeman@gentoo.org>
1442 Reorganization of ClientConfiguration and gutting of unused functions.
1443 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1444
1445 18 May 2005; Preston Cody <codeman@gentoo.org>
1446 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1447
1448 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1449 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1450 partitioning. CC serializes install profile to disk and prepare_chroot()
1451 copies it into /mnt/gentoo/root
1452
1453 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1454 Moved URI parsing into new function parse_uri()
1455
1456 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1457 Added XMLParser module.
1458
1459 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1460 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1461 Minor fix to is_uri() regex to allow hyphens in hostname.
1462
1463 12 May 2005; Preston Cody <codeman@gentoo.org>
1464 Updated finishing_cleanup for new unmounting method from agaffney.
1465
1466 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1467 Fix GLILogger to use correct time format string. Fix _edit_config() to
1468 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1469 unicode support to is_realstring().
1470
1471 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1472 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1473 return value instead of non-zero. Add code to output a traceback to the
1474 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1475 instead of --nocolor.
1476
1477 10 May 2005; Preston Cody <codeman@gentoo.org>
1478 Added GLIGenDialog.py to make a generic class for the dialog functions that
1479 can be used by both dialogfe and the netfe/be. updated both for new filename.
1480 date changes. 2004->2005.
1481
1482 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1483 Removed 'quiet=True' from spawn() calls
1484
1485 10 May 2005; Preston Cody <codeman@gentoo.org>
1486 Updated GLIUtility with patches from chotchki. Also added documentation
1487
1488 9 May 2005; Preston Cody <codeman@gentoo.org>
1489 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1490 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1491 from bug #89683, mostly touchups.
1492
1493 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1494 GLIStorageDevice cleanup patch from bug #91761
1495
1496 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1497 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1498 _edit_config(). Error logging casts 'error' to str
1499
1500 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Exceptions received in CC are logged before being passed to the FE. Added
1502 code to CC to handle exceptions *not* thrown by the installer itself.
1503
1504 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1505 get_max_mb_for_resize() returns -1 if not self.resizeable
1506
1507 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1508 More dirty rsync hacks :-/
1509
1510 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1511 Patches from chotchki (bug #90325) to improve CC networking. untested.
1512
1513 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1514 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1515 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1516 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1517 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1518 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1519 _get_packages_to_emerge()
1520
1521 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1522 Added group-adding code to set_users in ArchTemplate
1523
1524 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1525 Added post-install script code
1526
1527 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1528 Fixed encapsulation issues in GLIClientController (bug #90141)
1529
1530 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1531 Update resizing code in GLIStorageDevice
1532
1533 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1534 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1535
1536 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1537 Reverted change to ArchTemplate and added support for commented line in old
1538 code.
1539
1540 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1541 Changed _edit_config() to modify value in-place instead of commenting out and
1542 adding the new value to the end of the file.
1543
1544 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1545 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1546 Also updated TODO list.
1547
1548 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1549 Use blackace's one-liner to add comments for all function for use with
1550 pythondoc.
1551
1552 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1553 Moved 'end >= device_sectors' check out of loop to check for next partition's
1554 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1555 Partitioning code now tracks start/end of extended for placing logicals. End
1556 point of logical is now adjusted along with start.
1557
1558 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1559 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1560 the way of partitioning from a blank disk. Add int() around access to minor
1561 key in partition information due to new partition code leaving them as float.
1562
1563 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1564 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1565
1566 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1567 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1568
1569 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1570 Added support for DHCP options and MAC addresses in the InstallProfile.
1571
1572 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1573 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1574 sed to properly strip out junk.
1575
1576 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1577 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1578 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1579
1580 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1581 Fixed indent problem in GLICController
1582
1583 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1584 Check for disklabel type "loop" and use the device name without a minor.
1585
1586 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1587 Remove /tmp/compile_output.log and /var/log/install.log when install is
1588 complete. Added code to (hopefully) keep 2nd thread running after install.
1589 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1590 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1591 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1592
1593 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1594 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1595 when unpacking tarball.
1596
1597 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1598 rewrote filesystem_tools. looks like it works so ripping out all the old
1599 filesystem_tools code.
1600
1601 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1602 Changed the print statements to logging in the partitioning BE code.
1603 the logger may need to be imported to the x86archtemplate. unknown yet.
1604 Added the finishing_cleanup function.
1605 added a fix to the logger from BenUrban
1606
1607 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1608 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1609 URIs. The blank uri check has been commented out.
1610 ripped out error checking of set_services. this is done by _add_to_runlevel.
1611
1612 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1613 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1614
1615 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1616 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1617 the install profile if available. Commented out spawn() debugging prints
1618
1619 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1620 small changes to setup_network_post. moved adding to runlevel of net.x to
1621 after the device gets symlinked. added domainname runlevel command.
1622
1623 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1624 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1625 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1626 spawn() call in livecd-kernel code to pass environment variables.
1627 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1628 the install profile if available.
1629
1630 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1631 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1632 to handle installing the livecd kernel into the new system.
1633
1634 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1635 should emerge hotplug and coldplug before adding them to runlevel.
1636
1637 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1638 took chroot out of grub_install command.
1639
1640 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1641 Changed chroot wrapper code in spawn() to write the wrapper the python way
1642 instead of the bash way to avoid quote conflicts. Added
1643 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1644 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1645 as it breaks the piping.
1646
1647 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1648 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1649
1650 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1651 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1652 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1653 GLIInstallProfile.
1654
1655 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1656 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1657 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1658 into /mnt/gentoo in prepare_chroot()
1659
1660 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1661 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1662 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1663 to start/end sectors
1664
1665 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1666 Add 2>&1 to cmd in spawn()
1667
1668 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1669 Modified GLIUtility.exitsuccess() to work with return value from
1670 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1671 creates wrapper script for commands run inside chroot so multiple commands
1672 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1673 for the generated script from spawn()
1674
1675 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1676 Removed default values for stage tarball URI and portage tree URI from
1677 InstallProfile. These should be set by the FEs. also added services step to
1678 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1679 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1680
1681 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1682 Small fix for setting the default gateway. Also added feature to dialogfe.
1683
1684 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1685 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1686
1687 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1688 Fixed a bunch of true -> True typos. lots of em
1689 only write new resolv.conf if there are dns servers listed.
1690
1691 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1692 Commented out 'display_on_tty8=True' in start_portmap()
1693
1694 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1695 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1696
1697 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1698 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1699 lang parameter to __init__()
1700
1701 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1702 updates to TODO list.
1703
1704 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1705 Initial code for quickpkg GRP support. Fix loop to grab packages from
1706 'emerge -p blah'
1707
1708 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1709 check for dhcp in the network stuff and emerge it if it is.
1710 added quickpkg to TODO list
1711
1712 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1713 Changed the raising of 'warning' exceptions to a simple log of the error
1714 so that the installer can continue.
1715
1716 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1717 Some big changes. First, changed most output to display_on_tty8.
1718 Second, added log lines to all templates. Some smaller fixes such as typos.
1719 Also did some cleanups of old commented lines.
1720
1721 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1722 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1723 Undo change with fix. Escaping fix in GLIStorageDevice.py
1724
1725 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1726 more updates to TODO list. hopefully we'll soon start removing items instead
1727 of adding them.
1728
1729 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1730 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1731
1732 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1733 updated TODO list. (again)
1734
1735 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1736 changed output of portmap start to display_on_tty8.
1737 fixed bootloader for udev and multiple kernels
1738 fixed custom kernel config (again)
1739
1740 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1741 changed default value of CC._enable_ssh to True because this is smart.
1742 added code to allow custom kernel .config. may be unstable and break. sorry.
1743
1744 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1745 partition() now waits until after it checks for partition flags before delete
1746 the partitions :P
1747
1748 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1749 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1750 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1751 blank.
1752
1753 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1754 Various fixes related to the add_users function. Still not yet finished.
1755 Added things to the TODO list. Lets start using that!
1756
1757 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1758 Added code to x86Template to format newly created partitions. Also added
1759 some error checking code. GLIStorageDevice passes 'minor' with data to
1760 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1761 mounting code.
1762
1763 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1764 Took out unnecessary setting of random livecd root password. the cd already
1765 sets it randomly.
1766
1767 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1768 Took out an unneeded step from CC's run()
1769
1770 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1771 Attempt at detecting and adding windows partitions to lilo.
1772
1773 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1774 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1775 partition. fixed misc exit_status => exitstatus typo.
1776
1777 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1778 Added basic code for resizing filesystems with pyparted. Fixed code for
1779 resizing ntfs and ext2/3.
1780
1781 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1782 Fixed partition() in x86Template so that it scans through logicals and deletes
1783 before deleting containing extended partition. Also clears partition table to
1784 be safe before third pass.
1785
1786 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1787 Added mount_network_shares. not able to test it from this computer.
1788 will test when i get back to school.
1789 also added start_portmap to the client_controller as an always-do.
1790 agaffney says this is needed for NFS mounts to work.
1791
1792 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1793 Partial rewrite of partitioning code in x86Template. No longer shells out to
1794 parted to perform actions, now uses all pyparted calls. Code "works" in a
1795 test, but still needs lots of TLC. Also modified tests/install.py to work
1796 with x86Template and GLIClientConfiguration.
1797
1798 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1799 Initial move of partitioning code from ArchTemplate to x86Template.
1800
1801 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1802 Added grp_install and services to InstallProfile. forgot about the set_root_password
1803
1804 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1805 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1806 Test Install ran very well (skipping partitioning).
1807
1808 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1809 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1810 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1811 some may still have eluded me.
1812
1813 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1814 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1815 Just finished mount_local_partitions in GLIArchitectureTemplate
1816
1817 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1818 Added get_num_sectors() to GLIStorageDevice.
1819
1820 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1821 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1822 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1823 from GLIInstallProfile.
1824
1825 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1826 GLIStorageDevice returns "unknown" instead of "" for get_type()
1827
1828 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1829 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1830 actually work. Commented out resizability checking code for speed.
1831
1832 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1833 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1834 GLIStorageDevice at the suggestion of plors
1835
1836 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1837 Added a function to GLIUtility to pull a value from a make.conf-style config
1838 file. Minor type fix to GLIInstallProfile.py
1839
1840 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1841 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1842 network mounts from partition data structure in GLIInstallProfile
1843
1844 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1845 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1846 can be resized.
1847
1848 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1849 Added some of the final functions to GLIInstallTemplate.
1850 Yes this project is still active despite rare use of the Changelog!
1851
1852 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1853 Added the GLIPartitionTools.py file. This is a temporary insertion of
1854 partitioning tools that will eventually go into their own package.
1855
1856 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1857 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1858 for the program). Added __init__(install_profile, client_configuration) to
1859 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1860 to avoid constantly passing stuff every time we call a method.
1861
1862 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1863
1864 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1865 files without messing up all the other stuff in them. This will be used for making
1866 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1867
1868 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1869
1870 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1871 have a few basic things. I added two private methods. One is _depends(). This
1872 will be used for dependency checking (ie. unpacking a tarball requires that
1873 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1874 same syntax as os.system(), however, instead of being run in the liveCD
1875 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1876 isolated the code. Hope to work more this week to get this class formed...
1877
1878 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1879
1880 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1881 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1882 to allow for easier modification (mutable, rather than immutable objects). Updated
1883 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1884 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1885 Added initial unit test code.
1886
1887 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1888
1889 Added initial changelog. Setting up the basic structure of the CVS repository
1890 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1891 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20