/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1471 - (show annotations) (download)
Mon Jul 10 02:54:10 2006 UTC (8 years, 3 months ago) by codeman
File size: 77870 byte(s)
src/GLIGenDialog.py
make lilo only show up for x86 if non-networkless

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.658 2006/07/10 02:54:10 codeman Exp $
4
5 9 July 2006; Preston Cody <codeman@gentoo.org>
6 src/GLIGenDialog.py
7 make lilo only show up for x86 if non-networkless
8
9 25 Jun 2006; Preston Cody <codeman@gentoo.org>
10 src/GLIGenDialog.py
11 adding code to auto-add doscsi if a scsi drive detected.
12 this code is also in the gtkfe already
13
14 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIPortage.py:
16 pass proper PORTAGE_TMPDIR
17
18 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIUtility.py:
20 fix list_mirrors() to ignore <uri> lines that don't end on the same line
21
22 17 Jun 2006; Preston Cody <codeman@gentoo.org>
23 Added code to the mta step in AT to parse the install packages list and
24 look for mtas and if it finds it emerge it.
25 Initial attempt at moving extra_packages early in the setup to only show
26 local USE flags relating to those packages.
27 .. abandoned local USE project. no right way to do it.
28
29 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
30 src/GLIUtility.py:
31 minor tweak to regex for parsing mirrors.xml
32
33 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/templates/x86ArchitectureTemplate.py:
35 make use of strict_start and strict_end in partition recreation
36
37 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
38 src/templates/x86ArchitectureTemplate.py:
39 add strict_start and strict_end parameters to _add_partition()
40 add _find_current_minor_for_part() function to help with resizing
41 fix logical/extended logic in _partition_delete_step()
42 in _partition_resize_step(), delete, recreate at new size, resize, delete
43 call resize2fs with no size argument so it fills entire partition
44 more logging
45 only delete, recreate, resize, delete if growing
46 pass new size to resize2fs in K
47
48 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
49 src/GLIStorageDevice.py:
50 call reorder_minors() from tidy_partitions() instead of
51 set_partitions_from_disk()
52 add code to reorder_minors() to take extended/logical into consideration with
53 non-free partitions
54
55 30 Apr 2006; Preston Cody <codeman@gentoo.org>
56 added a check of the length of the directory in /usr/src if under 6 characters
57 should fix bug 131809
58
59 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIArchitectureTemplate.py:
61 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
62 and livecd-kernel
63
64 16 Apr 2006; Preston Cody <codeman@gentoo.org>
65 src/GLIGenDialog.py:
66 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
67
68 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
69 src/GLIInstallProfile.py:
70 change kernel-modules to not be so stupid
71
72 9 Apr 2006; Preston Cody <codeman@gentoo.org>
73 GLIMD: fix display problem with execute.pyhtml.
74 make tables better.
75
76 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
77 src/GLIInstallProfile.py:
78 fix handling of int/float for minor
79 src/templates/x86ArchitectureTemplate.py:
80 save/restore partition name
81 src/GLIStorageDevice.py:
82 support for partition name
83
84 8 Apr 2006; Preston Cody <codeman@gentoo.org>
85 touchups to add_profile in GLIMD to link to webgli
86 add a save to GLIMD profile button in webgli's saveprofile
87 gliserv.py:
88 initial attempt at custom networking info per client. hostname support only.
89
90 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/net/server/html/webgli/partitioning[234].pyhtml:
92 small fixes for new partioning code
93
94 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIClientController.py:
96 record PID of secondary thread
97
98 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIGenDialog.py:
100 small fix for new partitioning code
101
102 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
103 src/GLIStorageDevice.py:
104 add get_devnode()
105 fix up detect_devices() to detect cciss/ida arrays
106 src/templates/x86ArchitectureTemplate.py:
107 use get_devnode() instead of figuring out the devnode
108 skip first 3 steps if partition layout hasn't changed
109 wipe disk and create new disklabel before recreating partitions
110 src/GLIArchitectureTemplate.py:
111 use get_devnode() in local mount and fstab stuff
112
113 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
114 src/GLIStorageDevice.py:
115 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
116
117 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
118 src/templates/x86ArchitectureTemplate.py:
119 continue breakup/cleanup of partitioning code
120
121 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
122 src/GLIStorageDevice.py:
123 set disklabel to default for arch when clearing the partition table
124 src/templates/x86ArchitectureTemplate.py:
125 complete rewrite of first and second passes
126
127 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
128 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
129 allow iterating over Device object to get partitions
130
131 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
132 src/GLIStorageDevice.py:
133 allow access to Device object like a dict
134
135 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
136 src/GLIStorageDevice.py:
137 allow access to Partition object like a dict
138
139 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
140 src/templates/x86ArchitectureTemplate.py:
141 fail if any filesystems are mounted on the device being partitioned
142
143 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
144 src/GLIStorageDevice.py:
145 reorder minor numbers when loading partitions from disk to match the physical
146 partition order
147
148 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
149 src/GLIStorageDevice.py:
150 overhaul for supporting mac disklabels and partitions out of disk order
151 remove free space from inside extended partition when extended is removed
152
153 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
154 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
155 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
156 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
157 Added bash scripts, icons, and desktop entries from the ebuild to make my
158 life easier.
159
160 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
161 src/GLIStorageDevice.py:
162 raise an exception if the existing partitions are out of disk order
163 look for minors out of order instead of disk position
164
165 8 Mar 2006; Preston Cody <codeman@gentoo.org>
166 src/fe/dialog/gli-dialog and src/GLIGenDialog:
167 added networkless mode to gli-dialog.
168
169 6 Mar 2006; Preston Cody <codeman@gentoo.org>
170 src/templates/x86AT:
171 add windows detection code for grub. untested.
172
173 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/templates/x86ArchitectureTemplate.py:
175 bootloader and partitioning external commands log to compile_output.log
176 wait for device node to exist before resizing
177 add -v to ntfsresize command
178 src/GLIStorageDevice.py:
179 return start/end with ip structure
180 pad min ntfs size by 50 MB just to be safe
181 src/GLIArchitectureTemplate.py:
182 only install filesystem tools for partitions with a mountpoint
183
184 5 Mar 2006; Preston Cody <codeman@gentoo.org>
185 add error catching and text to saving profile dialogs
186
187 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
188 src/GLIPortage.py:
189 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
190 src/templates/x86ArchitectureTemplate.py:
191 fix checks for changed partitions so they will actually get deleted
192
193 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
194 src/GLIClientController.py:
195 slightly better error handling for pre-install failures
196
197 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
198 src/templates/x86ArchitectureTemplate.py:
199 proper return code checking for ext2/3 resizing
200
201 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
202 src/GLIClientController.py:
203 accept 'none' as well as 'null' for network type
204 src/GLIArchitectureTemplate.py:
205 ignore extended partitions in mount_local_partitions()
206 src/templates/x86ArchitectureTemplate.py:
207 use get_ordered_partition_list() instead of keys().sort() for new_part_list
208 check to make sure start sector for primary isn't less than end sector for
209 previous extended
210 src/GLIClientController.py:
211 write dns servers to /etc/resolv.conf
212
213 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIPortage.py:
215 copy_pkg_to_chroot() uses compile_output.log for command output
216
217 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
218 only keep a 1000 line 'scrollback' buffer for the compile output and log file
219
220 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
221 src/GLIPortage.py:
222 add code make GLIPortage.py capable of being run stand-along for dynamic
223 stage3 generation and copying packages in a GRP-ish way
224 grp code fixups
225
226 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIPortage.py:
228 ignore blank packages passed to get_deps() and emerge()
229
230 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
231 src/GLIUtility.py:
232 add get_chosts() function
233
234 *GLI-0.3 (12 Feb 2006)
235
236 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
237 src/templates/x86ArchitectureTemplate.py:
238 pull old start/end sector values from somewhere that actually has them
239 add logic for extended partition to code that makes sure new end sector
240 doesn't overlap start sector of next partitions
241 don't freak out if partition can't be deleted
242
243 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/GLIPortage.py:
245 run env-update at the end of copy_pkg_to_chroot()
246
247 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
248 src/templates/x86ArchitectureTemplate.py:
249 I'm a complete fscking dumbass. I recorded the end sector for partitions that
250 weren't being touched, but I never used it when recreating them...the end was
251 calculated from the size in MB instead :/
252
253 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
254 src/GLIArchitectureTemplate.py:
255 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
256 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
257 src/GLIPortage.py:
258 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
259 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
260 'resized' flag
261
262 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
263 src/GLIPortage.py:
264 short circuit and check vdb directly if package begins with '='
265
266 8 Feb 2006; Preston Cody <codeman@gentoo.org>
267 added more packages to extra_packages list in IP
268
269 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
270 src/templates/x86ArchitectureTemplate.py:
271 10 tries to create filesystem instead of 3
272 src/GLIPortage, src/GLIArchitectureTemplate.py:
273 ignore_missing flag for copy_pkg_to_chroot()
274
275 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
276 src/GLIPortage.py:
277 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
278
279 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
280 src/net/server/gliserv.py:
281 fix handling of 404 for real files
282 src/net/server/GLIServerProfile.py:
283 look for 'hostname' in attributes instead of 'name'
284
285 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
286 src/SimpleXMLParser.py:
287 initial support for 'include' in XML files
288 src/GLIStorageDevice.py:
289 initial support for %
290 src/GLIClientController.py:
291 add debugging statements to pre-install steps
292
293 15 Jan 2006; Preston Cody <codeman@gentoo.org>
294 webgli/configfiles:
295 check for key in etc_files['rc.conf'] to fix key error
296 webgli/timezone: small fix.
297 webgli/extrapackages: list-type fix
298 webgli/services: same
299 glimd: add/edit_client updates.
300
301 12 Jan 2006; Preston Cody <codeman@gentoo.org>
302 added configure.pyhtml to glimd. minor changes
303 to top and add_client. fixed up showargs.
304 added execute.pyhtml
305 changed register clients line in gliserv for name->hostname.
306 updated TODO.
307
308 10 Jan 2006; Preston Cody <codeman@gentoo.org>
309 src/net/server/*:
310 added add/del/edit client/profile.pythml for glimd.
311 updated templates, showclients, and gliserv.
312
313 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
314 src/net/server/*:
315 stupid threading module...
316
317 8 Jan 2006; Preston Cody <codeman@gentoo.org>
318 AT: rc.conf -> conf.d/clock
319
320 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
321 src/GLIPortage.py:
322 show 'Calculating dependencies for ...' in subprogress bar at beginning of
323 emerge()
324 src/GLIArchitectureTemplate.py:
325 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
326 in the chroot
327 remove _quickpkg_deps() and _portage_best_{visible,version}()
328 src/GLIUtility.py:
329 fail immediately in validate_uri() if provided URI can't be parsed
330 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
331 debug code in spawn()
332 use lower-level os.read() instead of file.read() because python sucks
333 src/templates/x86ArchitectureTemplate.py:
334 basic subprogress reporting for partitioning
335 total_steps was 1 too high
336
337 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
338 src/GLIUtility.py:
339 move parse_vdb_contents() to GLIPortage
340 src/GLIPortage.py:
341 remove all symlink fixups
342 ignore 'dir' entries in CONTENTS
343 call tar with -p
344
345 5 Jan 2006; Preston Cody <codeman@gentoo.org>
346 AT: bootsplash is now gensplash
347 gliserv: add advanced_mode to shared_info
348 webgli: Added advanced mode. mostly just disables a few screens.
349
350 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
351 src/GLIPortage.py:
352 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
353 added emerge()
354 update sub-progress after each package is emerged
355 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
356 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
357 remove link if it exists before moving content into place
358 src/GLIArchitectureTemplate.py:
359 install_packages() now calls emerge() in GLIPortage
360 change all calls to self._emerge() to self._portage.emerge()
361 comment out all emerge status checking...using exceptions now
362 call copy_pkg_to_chroot() directly for livecd-kernel
363
364 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
365 src/GLIArchitectureTemplate.py:
366 remove add_pkg_to_world() and copy_pkg_to_chroot()
367 copy installer.log to installer.log.failed on install failure
368 src/GLIUtility.py:
369 added get_keymaps()
370 spawn() takes any False argument for chroot instead of just None
371 src/GLIPortage.py:
372 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
373 change copy_pkg_to_chroot() to work properly with use_root=False
374 figure PORTAGE_TMPDIR properly
375
376 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
377 src/net/server/html/*:
378 converted showclients, load/saveprofile
379
380 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
381 src/GLIPortage.py:
382 exclude packages already in chroot vdb from binary deplist
383 chroot to use best_version for chroot's vdb
384 src/runtimedeps.py:
385 accept ROOT via commandline instead of env
386
387 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
388 src/runtimedeps.py:
389 remove passing of ROOT
390 src/GLIPortage.py:
391 modify get_deps() to get deptree for each package and merge into final list
392 remove depgraph class
393 add debugging code to get_deps()
394 src/GLIArchitectureTemplate.py:
395 combine code for GRP/compile in install_packages() into one block
396 debugging code in install_packages()
397
398 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
399 src/runtimedeps.py:
400 initial commit
401 src/GLIPortage.py:
402 use separate script for GRP deps
403 remove calls to portage module
404
405 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
406 src/GLIPortage.py:
407 initial commit
408 move some of portage function from GLIAT
409 flipped around a few function args
410 src/GLIArchitectureTemplate.py:
411 revamp install_packages() for new GLIPortage
412
413 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
414 src/GLIArchitectureTemplate.py:
415 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
416
417 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
418 src/net/server/gliserv.py:
419 wrap generated code in a class to isolate it a bit better
420 302 redirects work
421 don't use cgi.escape() for <% %>
422 src/net/server/html/webgli/*:
423 load/save profile
424 src/GLIUtility.py:
425 change /sbin/lspci to just lspci
426
427 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
428 src/GLIClientController.py:
429 change ordering of statements in CC run() while loop to not go past the end
430 of the array
431 src/GLIArchitectureTemplate.py:
432 removed redundant bind mounts
433
434 18 Dec 2005; Preston Cody <codeman@gentoo.org>
435 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
436 added a diagram by blackace from last night.
437 added the glossary in RTF format.
438
439 17 Dec 2005; Preston Cody <codeman@gentoo.org>
440 x86AT: separated out emerge/configure from running of bootloader
441 added MBR drive support to lilo.
442 these changes will likely not work.
443 AT: added setup_and_run_bootloader step.
444
445 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
446 src/net/server/gliserv.py:
447 call generated code in a function
448 src/net/server/html/webgli/*:
449 include top/bottom
450 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
451 src/GLIClientCongifuration.py:
452 install mode magic
453
454 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
455 src/GLIClientController.py:
456 use GLIException when there's an import problem
457 added debug code to show install_steps
458 src/templates/amd64ArchitectureTemplate.py:
459 add . to import path
460 proper path this time: ../../templates
461 src/GLIArchitectureTemplate.py:
462 add _portage_best_version() function
463
464 11 Dec 2005; Preston Cody <codeman@gentoo.org>
465 added initial glossary and gimli diagram to the docs directory.
466 modify gli-dialog to allow editing of the install_profile after loading XML.
467
468 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
469 src/net/server/html/webgli/:
470 converted globaluse, localuse, networkmounts, portagetree, and stageselection
471 moved saveclientconfig stuff into clientconfig
472 moved saveconfigfiles into config files
473 converted etc_portage and makedotconf
474 converted bootloader and kernel
475 convert daemons, extrapackages, networking, review, services, timezone, users
476 src/net/server/gliserv.py:
477 proper 404 handling for .pyhtml extension
478 HTML escape <% %> stuff
479 work around python's sucky regexes
480 src/GLIInstallProfile.py:
481 allow set_{rsync,ftp,http}_proxy() to accept empty values
482
483 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
484 src/net/server/gliserv.py:
485 initial commit of Legolas templating engine
486 302 redirects
487 src/net/server/html/index.html, src/net/server/webgli_template.html:
488 minor changes for new code
489 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
490 initial commit of the conversion from the monolithic WebGLIHandler.py to the
491 one file per path Legolas goodness
492 partitioning[2-4] done
493
494 5 Dec 2005; Preston Cody <codeman@gentoo.org>
495 webgli: dhcp options in CC and post-install.
496 updated comparison chart.
497 webgli: etc/portage/* and distcc support added. not too-well tested.
498
499 4 Dec 2005; Preston Cody <codeman@gentoo.org>
500 webgli_template.html: valign=top on left side.
501 webgli: fix bootloader boot_device. now working.
502 webgli: CC proxy done. post-install proxy in progress.
503
504 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
505 src/net/server/webgli_template.html:
506 increase padding for content cell to 7px and add colspan=2
507
508 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
509 webgli: added graphic bar on top
510 webgli: added hover effects on the links on the left
511 webgli: re-rendered header_bg.png to stretch without artifacts
512
513 3 Dec 2005; Preston Cody <codeman@gentoo.org>
514 webgli: make.conf disabling fixes for dynamic_stage3
515 fixed portage snapshot browse popup
516 all changes tested.
517 webgli: add debug mode to CC screen. the screen still needs lots of work.
518
519 1 Dec 2005; Preston Cody <codeman@gentoo.org>
520 added debug mode question to gli-dialog
521 added CC proxies to CC networking for gli-dialog
522 webgli: fixed skip CC networking if connection active
523 webgli: portage snapshot defaults to CD
524 webgli: bootloader mbr drive selection
525 webgli: USE flags unselectable if dynamic_stage3
526 webgli: manual extra packages and save button.
527
528 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
529 src/GLIUtility.py:
530 change ping count to 2
531 docs/comparison.html
532 initial commit
533
534 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
535 src/templates/x86ArchitectureTemplate.py:
536 fix map() issue with grub code
537 replace kernel_names and initrd_names loops with one-liners
538
539 27 Nov 2005; Preston Cody <codeman@gentoo.org>
540 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
541 initial gli-dialog support for recommended partitioning layout and clear.
542 failure cleanup now an option for gli-dialog.
543 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
544 added comparison list and updated TODO!
545
546 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
547 src/GLIArchitectureTemplate.py:
548 fix to stage1() debug code
549 fix to stage2() debug code
550
551 26 Nov 2005; Preston Cody <codeman@gentoo.org>
552 some more bootloader code fixes. forgot boot_device != mbr_device.
553
554 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
555 src/GLIStorageDevice.py:
556 fix to unallocated space merging when last one is after part 4
557
558 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
559 src/GLIArchitectureTemplate.py:
560 small fix to debugging code in copy_pkg_to_chroot()
561
562 23 Nov 2005; Preston Cody <codeman@gentoo.org>
563 more bugfixes with bootloader code
564 gli-dialog side appears to work
565
566 21 Nov 2005; Preston Cody <codeman@gentoo.org>
567 initial adding of boot_device to backend.
568 initial boot_device support added to gli-dialog.
569 some fixes of my poor coding
570
571 20 Nov 2005; Preston Cody <codeman@gentoo.org>
572 converted gli-dialog to use the install_package_list.
573 gtkfe has already been converted by AllanonJL
574 new way working in gli-dialog now and added to webgli.
575 added set/get_boot_device() to IP
576
577 19 Nov 2005; Preston Cody <codeman@gentoo.org>
578 get_install_package_list added to InstallProfile. This can be used by the FEs
579
580 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
581 src/templates/x86ArchitectureTemplate.py:
582 call ls with '-1 --color=no'
583
584 16 Nov 2005; Preston Cody <codeman@gentoo.org>
585 added warning (#9) to GRP ppl about stage3 tarballs
586
587 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
588 src/GLIArchitectureTemplate.py:
589 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
590 confused
591
592 13 Nov 2005; Preston Cody <codeman@gentoo.org>
593 removed protocols from rc.conf screens
594 finished initial rc.conf and make.conf in webgli
595
596 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
597 src/net/server/gliserv.py:
598 add -h option to usage()
599 show time and request URI in debug mode
600 show client IP in debug mode
601 just use IP instead of trying to do a reverse lookup
602
603 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
604 src/net/server/gliserv.py:
605 'classier' 401 message
606 proper commandline parsing
607 help via -h
608 user/pass can be specificed via commandline option
609
610 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
611 src/net/server/gliserv.py:
612 basic HTTP auth
613
614 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
615 src/net/server/gliserv.py:
616 dynamic module reloading (yipee!)
617 send 'Last-Modified' header for real files
618 respond to HEAD with just headers
619 src/net/server/handlers/WebGLIHandler.py:
620 icons for drives
621
622 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
623 src/net/server/handlers/WebGLIHandler.py:
624 initial 'pretty' partition table display support
625 clicking partition in 'pretty' display works instead of radio buttons
626 radio buttons and pretty display work together
627 META redirect instead of javascript
628 pretty display stretches across entire screen
629 'Recommended layout' and 'Clear drive' functions
630 properly catch exceptions from do_recommended()
631 src/GLIArchitectureTemplate.py:
632 replace preinst, copy, postinst, rm steps with qmerge
633 whoops...that shouldn't have been commented out
634 create image_dir with -p in copy_pkg_to_chroot()
635 more generic of symlink crappiness
636 new copy_pkg_to_chroot() actually works now
637
638 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/GLIStorageDevice.py:
640 initial generic disk support
641 fixes for add_partition() code
642 src/net/server/handlers/WebGLIHandler.py:
643 added support for creating generic disks
644 add new partition working
645 save and delete partitions
646
647 6 Nov 2005; Preston Cody <codeman@gentoo.org>
648 webgli: Partitioning making progress.
649
650 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
651 src/GLIArchitectureTemplate.py:
652 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
653 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
654 dir) and works around /etc/gconf symlink problem
655
656 5 Nov 2005; Preston Cody <codeman@gentoo.org>
657 webgli: lots of updates. preliminary partitioning. extra packages works.
658
659 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
660 src/net/server/gliserv.py:
661 httpd now supports HTTPS and falls back to HTTP if not available
662 make fallback actually work
663 src/net/server/SecureXMLRPCServer.py:
664 SecureSocketServer is now threaded
665
666 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
667 src/net/client/gliclient.py:
668 try to use HTTPS for XMLRPC first and fallback to HTTP
669 pretend mode
670 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
671 HTTPS XMLRPC goodness from samyron
672 pass name of certificate
673
674 31 Oct 2005; Preston Cody <codeman@gentoo.org>
675 wegli: daemons and services screens done.
676
677 30 Oct 2005; Preston Cody <codeman@gentoo.org>
678 webgli: networking and users screens
679 added return_redirect to handler.py
680 loading and saving install/client profiles works for webgli now
681 Review also done
682
683 *GLI-0.2 (27 Oct 2005)
684
685 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
686 src/templates/x86ArchitectureTemplate.py:
687 properly check for bootloader emerge exist status with exitsuccess()
688 log output of grub install command
689 add --batch --no-floppy to grub command
690 grubinstallstring only gets logged if debug is on
691 src/GLIUtility.py:
692 update progress bar to 100% when process finishes
693
694 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
695 src/GLIClientController.py:
696 added debugging code for the interaction between the 2 threads via Event()
697 src/GLIUtility.py:
698 doubled the buffer size in spawn()
699 bump buffer size up to 16384
700 only report progress in 5% increments
701 src/GLIArchitectureTemplate.py:
702 kernelpkgs.txt support code
703 above disabled because it sucks
704 added add_pkg_to_world()
705
706 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
707 src/GLIArchitectureTemplate.py:
708 use tar | tar to copy files in copy_pkg_to_chroot()
709 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
710
711 23 Oct 2005; Preston Cody <codeman@gentoo.org>
712 DEBUGGING ADDED TO AT. verbose field added to CConfig.
713
714 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
715 src/net/server/gliserv.py:
716 / maps to index.html
717 look for actual files in html/
718 src/net/html:
719 new template
720 src/GLIUtility.py:
721 added parse_vdb_contents()
722 src/GLIArchitectureTemplate.py:
723 added copy_pkg_to_chroot()
724 added debug code to dynamic-stage3
725 switch dynamic-stage3 to new method
726 lots of bug fixes from adding debug code
727
728 22 Oct 2005; Preston Cody <codeman@gentoo.org>
729 webgli initial bootloader support + changed make.conf.
730 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
731
732 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
733 src/GLIUtility.py:
734 horrible tangled mess of code that is tarball unpacking subprogress display
735 add unpack progress to portage snapshot
736 use read() instead of readlines() in spawn()
737 only update progress bar for whole percents
738
739 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
740 src/templates/x86ArchitectureTemplate.py:
741 change call to 'grub' to use GLIUtility.exitsuccess()
742 add definition of 'build_mode' in _configure_lilo()
743 src/misc/updategtkfe, src/misc/updateglid:
744 fix so subshell is called in root shell
745
746 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
747 src/net/server/handlers/WebGLIHandler.py:
748 stage screen launches URI browser in sized window with various properties set
749
750 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
751 src/misc/updategtkfe:
752 updated to actually work
753 remove previous snapshot and extracted dir before downloading
754 src/misc/updateglid:
755 updated to actually work
756 src/templates/x86ArchitectureTemplate.py:
757 fixed bug where grub code was looking for 'root+root+file_name2'
758
759 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
760 src/net/server/handlers/WebGLIHandler.py:
761 URI browser
762 added mirror selection
763 src/GLIUtility.py:
764 ls via ssh strips off ending *
765
766 16 Oct 2005; Preston Cody <codeman@gentoo.org>
767 more updates to webgli. stage selection.
768
769 11 Oct 2005; Preston Cody <codeman@gentoo.org>
770 updated webgli with preliminary Network Mounts support.
771
772 9 Oct 2005; Preston Cody <codeman@gentoo.org>
773 GenDialog: string formatting and yes/no label fixes.
774 added WebGLI template for gliserv.py
775 added WebGLIHandler as well as a definition for it in gliserv.py
776 updates to the webgli files even though they won't be there for long.
777 Utility: remove exception for non-existant grppkgs.txt until the new livecd
778 goes public.
779
780 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
781 src/net/server/gliserv.py:
782 override dict to not be so anal
783 main server now loads separate module to handle requests
784 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
785 split out profile URLs into separate handler function
786 move handlers into subdirectory
787 add Welcome and Clients handlers
788
789 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
790 src/GLIUtility.py:
791 raise exception if password prompt received twice
792
793 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/GLIUtility.py:
795 removed rot13ify()
796
797 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
798 src/net/server/gliserv.py:
799 allow for param to be passed multiple times in GET
800 no XMLRPC functions return None
801 modify POST request parsing to only create a list if needed
802 fix GET request parsing so the list creation for multiple values works
803 src/net/client/gliclient.py:
804 various typo and type mismatch fixes
805 exit after exception
806
807 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
808 src/net/client/gliclient.py:
809 initial commit
810 pass MAC to XMLRPC functions
811 src/net/server/GLIServerProfile.py:
812 rename GLIClientsProfiles to GLIServerProfile
813
814 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
815 src/net/server/gliserv.py:
816 now handles POST requests
817 move majority of request handling code to common_handler() to reduce code
818 duplication
819 profile loading
820 client reg via XMLRPC goes into SharedInfo()
821 /showclients redesign
822 template fixes
823 allow handler functions to add/change headers
824 save profile
825
826 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
827 src/net/server/GLIClientsProfiles.py:
828 initial commit
829 src/net/server/template.html:
830 initial commit
831 src/net/server/gliserv.py:
832 add template mojo
833
834 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
835 src/net/server/gliserv.py:
836 XMLRPC mojo
837
838 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
839 src/GLIArchitectureTemplate.py:
840 add code in _edit_config() to comment line where variable is defined
841 previously
842 insert new line under previous definition of variable if it exists
843 small _edit_config() cleanup
844 src/GLIStorageDevice.py:
845 add clear_partitions() function
846 new sizes for recommended partition layout
847 automatically calculate swap size for recommended layout
848
849 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
850 src/templates/x86ArchitectureTemplate.py:
851 fat16 mojo
852
853 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
854 src/GLIStorageDevice.py:
855 prevent do_recommended() from being run twice
856 rewrite do_recommended() to be more robust
857 src/GLIArchitectureTemplate.py:
858 rework _edit_config() to not write duplicate entries
859
860 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
861 src/GLIStorageDevice.py:
862 added do_recommended() function to automatically created 256M/1G/* layout
863
864 17 Sep 2005; Preston Cody <codeman@gentoo.org>
865 src/gli-dialog.py: added set_distcc to the list
866 GenDialog: added set_distcc. untested.
867 IP: added install_distcc flag.
868 AT: added install_distcc function based on the flag. runs after build_kernel
869 changed AT spawn command for distcc for nodeps.
870
871 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
872 src/GLIUtility.py:
873 add rot13ify() function
874
875 16 Sep 2005; Preston Cody <codeman@gentoo.org>
876 src/GenDialog.py
877 added a sentence of text. unchecking support added.
878
879 15 Sep 2005; Preston Cody <codeman@gentoo.org>
880 src/GLIUtility.py
881 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
882 src/GenDialog.py
883 still working on extra_packages. transformed the list to new format.
884 added GRP indication to list. untested.
885 TODO lists updated.
886 src/fe/dialog/gli-dialog.py
887 spelling mistook.
888
889 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
890 src/GLIUtility.py:
891 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
892
893 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
894 src/GLIUtility.py:
895 add get_directory_listing_from_uri()
896 add http support to above
897 add ftp support to above
898 add scp support to above
899 src/GLIArchitectureTemplate.py:
900 "0" instead of 0 for key of single-element dict passed to _edit_config()
901
902 5 Sep 2005; Preston Cody <codeman@gentoo.org>
903 value_only -> only_value
904
905 3 Sep 2005; Preston Cody <codeman@gentoo.org>
906 gutted out all of etc_portage structure since it is now all handled by
907 etc_files
908
909 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
910 src/GLIArchitectureTemplate.py:
911 install_packages() sends progress update notifications
912 src/templates/x86ArchitectureTemplate.py:
913 increase sleep to 5s between format tries
914 src/GLIClientController.py:
915 pass 'self' to AT instead of 'self._pretend'
916
917 2 Sep 2005; Preston Cody <codeman@gentoo.org>
918 logger -> logger.log in x86AT
919
920 1 Sep 2005; Preston Cody <codeman@gentoo.org>
921 added set_etc_portage to IP. debugging gli-d's support for it.
922
923 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
924 src/templates/x86ArchitectureTemplate.py:
925 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
926
927 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
928 src/GLIArchitectureTemplate.py:
929 add _portage_best_version() function and rework install_packages() to allow
930 for future X of Y tracking
931 Use best_visible instead of best_version
932 tracked down and fixed missing = causing empty install extra packages
933 use = when emerging also
934 quickpkg hokey pokey
935 run _get_packages_to_emerge() again with -pk
936
937 22 Aug 2005; Preston Cody <codeman@gentoo.org>
938 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
939 the end of install_packages.
940 added updateglid to /src/misc
941 updated all core files with new GPL notice and copyright statement.
942
943 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
944 src/GLIUtility.py:
945 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
946 a snapshot in /mnt/cdrom/snapshots/
947 get_snapshot_from_cd() adds file:// at the beginning
948 change calls to extra package special case functions to 'self.blah'
949
950 21 Aug 2005; Preston Cody <codeman@gentoo.org>
951 src/ArchTemplate: changed "voodoo".
952 changed order of portage sync methods. made a fallback to webrsync if
953 normal emerge sync fails.
954 removed get_sources_from_cd because it is obsolete.
955 add special cases to install_packages. remove fatal exception on package
956 install failure b/c the box will still be bootable.
957 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
958 handled in the FEs.
959 src/GenDialog: added a bunch of code for dealing with x11-based packages.
960 awaiting testing.
961
962 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
963 src/GLIStorageDevice.py:
964 global try/except block around fs resizable detection code
965 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
966 install-failed cleanup function
967
968 18 Aug 2005; Preston Cody <codeman@gentoo.org>
969 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
970
971 16 Aug 2005; Preston Cody <codeman@gentoo.org>
972 GLIGenDialog:
973 add drive choices for loaded configs.
974 force snapshot for dynamic_stage3
975 init the snapshoturi input to the cd snapshot if not already selected.
976 if dynamic_stage3, skip the make.conf step.
977 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
978 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
979
980 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
981 src/GLIArchitectureTemplate.py:
982 manually call MAKEDEV in stage3-dynamic code
983 copy /etc/inittab.old to /etc/inittab in chroot
984 src/GLIUtility.py:
985 add beginning of validate_uri() function
986 add file:/// support to validate_uri()
987 single quotes when setting livecd password
988
989 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
990 src/GLIGenDialog.py:
991 change getmountpoint() to get_mountpoint()
992 src/misc/updategtkfe:
993 committed script to automatically download latest snapshot and run gtkfe
994 src/templates/x86ArchitectureTemplate.py:
995 fix _configure_lilo_add_windows() for IP -> GLISD stuff
996 src/GLIArchitectureTemplate.py:
997 give tmp_minor an initial value in mount_local_partitions so that the value
998 remain from the previous drive
999
1000 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1001 src/templates/x86ArchitectureTemplate.py:
1002 Fix _configure_lilo() for IP using GLISD stuff
1003 src/GLIArchitectureTemplate.py:
1004 install_cron_daemon() treats "none" specially
1005
1006 14 Aug 2005; Preston Cody <codeman@gentoo.org>
1007 old patch from Steven Mertens to resolve bug #96642
1008 numerous asthetic changes to GenDialog, no real functionality changes though.
1009 strings renamed for global use if necessary.
1010 fix all three parts of bug 102291
1011 disable set_etc_portage until fully-written.
1012
1013 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1014 src/GLIClientController.py:
1015 lower-case http/ftp proxy envvars
1016
1017 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 src/GLIClientController.py:
1019 log end of pre_install steps to aid in debugging
1020 src/templates/x86ArchitectureTemplate.py:
1021 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1022
1023 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1024 src/GLIArchitectureTemplate.py
1025 check to make sure that the device node we're wait for to exist isn't of
1026 type 'free'
1027
1028 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1029 src/GLIGenDialog.py:
1030 convert install_packages to list in set_extra_packages()
1031 check return code of checklist() call in "Manual" section
1032 *actually* fix the first problem
1033
1034 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1035 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1036 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1037
1038 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1039 src/GLIArchitectureTemplate.py:
1040 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1041
1042 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
1043 Add CDATA support to SimpleXMLParser and add utility functions for it.
1044
1045 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1046 src/GLIArchitectureTemplate.py:
1047 Fix case where vixie-cron is specified as a full package atom, as we still
1048 don't want to run 'crontab /etc/crontab' for it.
1049
1050 *GLI-0.1 (3 Aug 2005)
1051
1052 30 Jul 2005; Preston Cody <codeman@gentoo.org>
1053 add scp to list of is_uri() so GenDialog doesn't complain.
1054 fixed livecd-kernel bug in bootloader code.
1055 fixed gendialog for dynamic_stage3 instead of "networkless"
1056 change bootloader to allow for both initrd and initramfs.
1057 fix IP for dynamic_stage3.
1058 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1059
1060 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1061 Added full scp:// URI support to get_uri() in GLIUtility
1062 Remove "networkless" from dynamic stage3 if locic.
1063 Remove print statement from scp:// code.
1064 Change scp code to check for "assword: " instead of "Password:"
1065 Fix post-install network code to create net.eth1+ symlink correctly
1066 Check to make sure pkg can be split on / and some debugging code
1067 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1068 SimpleXMLParser handles True/False/None correctly now
1069 Comment out above fix
1070 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1071
1072 28 Jul 2005; Scott Myron <samyron@gentoo.org>
1073 Removed a FIXME in the GLIClientConfiguration that is no
1074 longer needed.
1075
1076 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1077 Default to x86 in ClientConfig
1078 Typo in build-a-stage3 code.
1079 Remove MAKEDEV call in build-a-stage3 postscript.
1080
1081 26 Jul 2005; Preston Cody <codeman@gentoo.org>
1082 Rewrote init of IP for gli-d. Other GenDialog updates.
1083 allow network_type to be None in CConfig.
1084
1085 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1086 Add _dynamic_stage3 option to IP.
1087 Add check for that option to dynamic stage3 code in ArchTemplate.
1088 Fix code to determine default route in get_eth_info() in GLIUtility.
1089 Fix serialization of dns-servers in ClientConfig.
1090
1091 24 Jul 2005; Preston Cody <codeman@gentoo.org>
1092 changed default values of cron/logger in IP.
1093 moved GenDialog IP init out to the individual files. gli-dialog's version
1094 will change quite a bit.
1095
1096 22 Jul 2005; Preston Cody <codeman@gentoo.org>
1097 added ppcArchTemplate. blank now. working on yaboot.
1098 modified ArchTemplate for amd64 and ppc custom kernels.
1099 skeleton implementation of _configure_yaboot.
1100 small fixes to other templates.
1101
1102 21 Jul 2005; Preston Cody <codeman@gentoo.org>
1103 GenDialog updates. changed comment in IP.
1104
1105 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1106 src/GLIInstallProfile.py:
1107 Fix codeman's screwup of changing the service seperator to ',' in the parser
1108 without changing it in the serialization code! Also document this in a
1109 comment so you find it easier. Everybody needs to make sure they update
1110 their install profiles!
1111
1112 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1113 src/GLIArchitectureTemplate.py:
1114 Fix casting of list to string and concat of None with string, as well as
1115 commented prototype of checking that mounting actually worked (found a case
1116 where mount can return success, but the mount won't be done).
1117
1118 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1119 src/templates/x86ArchitectureTemplate.py:
1120 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1121 checking for the device, and sleeping 1 second each time.
1122
1123 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1124 src/templates/x86ArchitectureTemplate.py:
1125 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1126 bootloader works again. Also rename _install_{grub,lilo} to
1127 _configure_{grub,lilo} since they don't install the loaders anymore
1128 themselves.
1129
1130 7 Jul 2005; Preston Cody <codeman@gentoo.org>
1131 fix global USE flags to not include the arch types at the end.
1132 updates to GenDialog and gli-d.
1133
1134 6 Jul 2005; Preston Cody <codeman@gentoo.org>
1135 fixing bootloader code for no initrd and initrd->initramfs naming change.
1136
1137 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1138 Proper comments and parameters to GLIException in install_mta()
1139 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1140 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1141 list_tarball_from_mirror() to eliminate blank last item.
1142
1143 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
1144 Added stage3 generation code.
1145
1146 5 Jul 2005; Preston Cody <codeman@gentoo.org>
1147 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1148 Mild changes to GenDialog.
1149
1150 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1151 Remove separate install step configure_rc_conf() since it's handled by
1152 update_config_files()
1153 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1154 function is called twice on the same file.
1155
1156 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1157 Missing \ in sed in _get_packages_to_emerge()
1158 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1159 Check in _quickpkg_deps() to ignore blank package names returned from
1160 _get_packages_to_emerge()
1161
1162 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1163 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1164 in the dialog.py gauge code.
1165
1166 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1167 Add code to update_config_files() to go through etc_files and update stuff.
1168 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1169 Only use float() in partition xml parsing code if type == "free"
1170
1171 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1172 finished almost all internationalization of GenDialog.
1173 attempt at fixing rc.conf function. moved 3 generate functions out of
1174 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1175 added dialog.py to the fe/dialog directory so it actually gets used.
1176
1177 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1178 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1179
1180 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1181 fix extra entry in list_mirrors()
1182 beginning internationalization runthrough.
1183
1184 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1185 added dialog.py to /src temporarily until it gets accepted upstream.
1186 fix for unused value in form in dialog.py and changed heights.
1187 fix GenDialog forms.
1188
1189 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1190 Changed hostname/domainname for new baselayout.
1191 Changed _add_to_runlevel errors to logs.
1192 Updated TODO list to show status of GenDialog
1193 More updates to GenDialog including two checklists that probably won't work.
1194 update IP to use comma-separated list instead of space separated for services.
1195
1196 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1197 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1198 GenDialog as it gets closer to completion.
1199
1200 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1201 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1202 instead of int() in add_partition_device_partition() for minor (closes 96804)
1203
1204 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1206 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1207 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1208
1209 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1210 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1211 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1212 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1213 Fix undefined variable 'output' issue in spawn().
1214
1215 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1216 More updates to GenDialog and gli-d.
1217
1218 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1219 Modify list_mirrors() to return a list of mirror URL/name pairs.
1220
1221 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1222 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1223 get subarch.
1224
1225 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1226 Backend partitioning will create disklabel is none exists. Installprofile
1227 defaults to "" now instead of "msdos" for disklabel type. Fix for
1228 mount_local_partitions() to remember device along with minor in the
1229 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1230 add else block to log unsupported netmount types to mount_network_shares()
1231
1232 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1233 src/GLIArchitectureTemplate.py:
1234 Refactor kernel_compile common stuff, fix 2.4 build process.
1235 src/fe/cli/clife.py:
1236 Logging system.
1237 src/GLIUtility.py, src/GLIStorageDevice.py:
1238 Add comments about re-writes needed for boxes without sysfs.
1239
1240 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1241 src/GLIArchitectureTemplate.py:
1242 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1243 'make dep' call for custom compile. build_mode support for prepare-only and
1244 none types completed. custom compile function chains shell functions in
1245 spawned script, to allow for catching all errors.
1246
1247 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1248 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1249 and GenDialog. other gendialog updates as well. kernel updates untested.
1250
1251 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1252 src/GLIInstallProfile.py:
1253 Change structure of etc-portage stuff. The serialization was broken before my
1254 last commit, and I am the only person that's ever used it. The new schema is
1255 as follows:
1256 <etc-portage>
1257 <file name="package.mask"/>
1258 <file name="package.unmask">
1259 <entry atom="sys-kernel/openmosix-sources"/>
1260 </file>
1261 <file name="package.use">
1262 <entry atom="sys-libs/db">
1263 -java
1264 </entry>
1265 <entry atom="dev-libs/cyrus-sasl">
1266 -ldap
1267 </entry>
1268 </file>
1269 </etc-portage>
1270
1271
1272 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1273 src/GLIInstallProfile.py:
1274 Add new entry for gli-profile/kernel-build-method item. Add missing
1275 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1276 keys in the same order.
1277
1278 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1279 src/GLIArchitectureTemplate.py:
1280 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1281 was repeatedly appended to make.conf.
1282
1283 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1284 src/GLIArchitectureTemplate.py:
1285 Put some Linux-2.6 specific code under a if statement. Store list of
1286 successfully mounted swap device for using swapoff. Add proper error checking
1287 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1288 'file'. Clean up some redundant code (thanks to pychecker).'
1289
1290 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Fix typos: get_extended() instead of get_extended_partition(). Added
1292 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1293 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1294
1295 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1296 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1297 in add_network_interface.
1298
1299 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1300 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1301 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1302 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1303 prepare_chroot.
1304
1305 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1306 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1307 +src/fe/installer-gtk:
1308 Add new automated CLI frontend. Add scripts that are the intended means to
1309 use each frontend.
1310
1311 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1312 src/GLIClientController.py:
1313 Add null type to network config, for cases where the interface is already up
1314 and should not be touched (netboot for example).
1315
1316 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1317 src/GLIArchitectureTemplate.py:
1318 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1319 string!. Try to use binary packages if available by default.
1320
1321 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1322 src/GLIArchitectureTemplate.py:
1323 More error checking for _add_to_runlevel, to ensure that the init script
1324 actually exists before we try to add it. set_services phase must take place
1325 after the package installation, otherwise the init scripts might not exist.
1326 Find the correct init script for the cron and logging daemons, and add that
1327 instead of the package atom.
1328
1329 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1330 src/GLIArchitectureTemplate.py:
1331 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1332 usage of 'file' to 'contents' for the variable name, as it shadows
1333 __builtin__.file.
1334
1335 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1336 src/GLIArchitectureTemplate.py:
1337 Add MTA install code, and include MTA install phase. Ensure
1338 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1339 for 'none' kernel config for build_kernel phase. Put kernel_script in
1340 /var/tmp instead of /root for build_kernel phase.
1341
1342 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1343 Rename mta variables to match syslog/cron variables.
1344
1345 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1346 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1347 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1348 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1349 src/templates/.cvsignore, src/tests/.cvsignore:
1350 Refactor partition formatting again to include error checking. Allow 'none'
1351 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1352
1353 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1354 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1355 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1356 only have a single spawn call.
1357
1358 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1359 refixed samyron's fix of set_architecture_template.
1360
1361 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1362 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1363 be executable.
1364
1365 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1366 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1367 error checking when you call set_architecture_template.
1368
1369 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1370 moved the mkfsopts input to the partition options menu instead of the during
1371 the creation process. updated GenDialog to say it supports reiserfs v3.
1372
1373 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1374 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1375 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1376 Add support for other partition types to dialogfe.
1377 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1378 avoid integer overflows and wraparounds.
1379
1380 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 Removed start/end from XML output and added mkfsopts to partitioning info.
1382 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1383 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1384 in GLIClientConfiguration. Change from .1 and .9 to constants for
1385 partitioning. Fix free space overwriting bug. Remove a few unused functions
1386 from rewrite. Fix call to get_partition_at()
1387
1388 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1389 Updates to GenDialog and dialogfe.
1390
1391 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1392 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1393
1394 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1395 more GenDialog updates to partitioning.
1396
1397 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1398 Indenting issue in GLISD/get_ordered_partition_list.
1399 updates to GenDialog partitioning and added default UTC for timezone in IP.
1400
1401 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1402 Added GLISD.get_model()
1403
1404 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1405 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1406 More updates to GenDialog :)
1407
1408 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1409 Added get_interface_realname() function.
1410
1411 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1412 Added auto-save of CConfig and copying to new /root after install.
1413 yet even more GenDialog updates.
1414
1415 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1416 removed print statement from GLISD. more updates to GenDialog.
1417
1418 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1419 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1420 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1421 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1422 places in GLIClientConfiguration.
1423
1424 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1425 Fix mount_local_partitions(), configure_fstab(), and
1426 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1427 A few more fixes for templates/x86Archtemplate
1428
1429 27 May 2005; Preston Cody <codeman@gentoo.org>
1430 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1431 a work in progress.
1432
1433 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1434 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1435 directly. GLISD can now handle data imported from XML.
1436
1437 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1438 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1439 handle blank (no disklabel) disks.
1440
1441 20 May 2005; Preston Cody <codeman@gentoo.org>
1442 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1443 up, documented, and separated out serialization and grouped all sections.
1444
1445 19 May 2005; Preston Cody <codeman@gentoo.org>
1446 Reorganization of ClientConfiguration and gutting of unused functions.
1447 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1448
1449 18 May 2005; Preston Cody <codeman@gentoo.org>
1450 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1451
1452 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1453 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1454 partitioning. CC serializes install profile to disk and prepare_chroot()
1455 copies it into /mnt/gentoo/root
1456
1457 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1458 Moved URI parsing into new function parse_uri()
1459
1460 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1461 Added XMLParser module.
1462
1463 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1464 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1465 Minor fix to is_uri() regex to allow hyphens in hostname.
1466
1467 12 May 2005; Preston Cody <codeman@gentoo.org>
1468 Updated finishing_cleanup for new unmounting method from agaffney.
1469
1470 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1471 Fix GLILogger to use correct time format string. Fix _edit_config() to
1472 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1473 unicode support to is_realstring().
1474
1475 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1476 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1477 return value instead of non-zero. Add code to output a traceback to the
1478 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1479 instead of --nocolor.
1480
1481 10 May 2005; Preston Cody <codeman@gentoo.org>
1482 Added GLIGenDialog.py to make a generic class for the dialog functions that
1483 can be used by both dialogfe and the netfe/be. updated both for new filename.
1484 date changes. 2004->2005.
1485
1486 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1487 Removed 'quiet=True' from spawn() calls
1488
1489 10 May 2005; Preston Cody <codeman@gentoo.org>
1490 Updated GLIUtility with patches from chotchki. Also added documentation
1491
1492 9 May 2005; Preston Cody <codeman@gentoo.org>
1493 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1494 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1495 from bug #89683, mostly touchups.
1496
1497 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1498 GLIStorageDevice cleanup patch from bug #91761
1499
1500 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1502 _edit_config(). Error logging casts 'error' to str
1503
1504 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1505 Exceptions received in CC are logged before being passed to the FE. Added
1506 code to CC to handle exceptions *not* thrown by the installer itself.
1507
1508 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1509 get_max_mb_for_resize() returns -1 if not self.resizeable
1510
1511 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1512 More dirty rsync hacks :-/
1513
1514 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1515 Patches from chotchki (bug #90325) to improve CC networking. untested.
1516
1517 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1518 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1519 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1520 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1521 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1522 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1523 _get_packages_to_emerge()
1524
1525 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1526 Added group-adding code to set_users in ArchTemplate
1527
1528 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1529 Added post-install script code
1530
1531 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1532 Fixed encapsulation issues in GLIClientController (bug #90141)
1533
1534 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1535 Update resizing code in GLIStorageDevice
1536
1537 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1538 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1539
1540 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1541 Reverted change to ArchTemplate and added support for commented line in old
1542 code.
1543
1544 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1545 Changed _edit_config() to modify value in-place instead of commenting out and
1546 adding the new value to the end of the file.
1547
1548 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1549 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1550 Also updated TODO list.
1551
1552 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1553 Use blackace's one-liner to add comments for all function for use with
1554 pythondoc.
1555
1556 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1557 Moved 'end >= device_sectors' check out of loop to check for next partition's
1558 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1559 Partitioning code now tracks start/end of extended for placing logicals. End
1560 point of logical is now adjusted along with start.
1561
1562 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1563 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1564 the way of partitioning from a blank disk. Add int() around access to minor
1565 key in partition information due to new partition code leaving them as float.
1566
1567 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1568 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1569
1570 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1571 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1572
1573 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1574 Added support for DHCP options and MAC addresses in the InstallProfile.
1575
1576 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1577 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1578 sed to properly strip out junk.
1579
1580 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1581 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1582 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1583
1584 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1585 Fixed indent problem in GLICController
1586
1587 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1588 Check for disklabel type "loop" and use the device name without a minor.
1589
1590 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1591 Remove /tmp/compile_output.log and /var/log/install.log when install is
1592 complete. Added code to (hopefully) keep 2nd thread running after install.
1593 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1594 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1595 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1596
1597 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1598 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1599 when unpacking tarball.
1600
1601 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1602 rewrote filesystem_tools. looks like it works so ripping out all the old
1603 filesystem_tools code.
1604
1605 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1606 Changed the print statements to logging in the partitioning BE code.
1607 the logger may need to be imported to the x86archtemplate. unknown yet.
1608 Added the finishing_cleanup function.
1609 added a fix to the logger from BenUrban
1610
1611 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1612 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1613 URIs. The blank uri check has been commented out.
1614 ripped out error checking of set_services. this is done by _add_to_runlevel.
1615
1616 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1617 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1618
1619 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1620 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1621 the install profile if available. Commented out spawn() debugging prints
1622
1623 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1624 small changes to setup_network_post. moved adding to runlevel of net.x to
1625 after the device gets symlinked. added domainname runlevel command.
1626
1627 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1628 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1629 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1630 spawn() call in livecd-kernel code to pass environment variables.
1631 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1632 the install profile if available.
1633
1634 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1635 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1636 to handle installing the livecd kernel into the new system.
1637
1638 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1639 should emerge hotplug and coldplug before adding them to runlevel.
1640
1641 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1642 took chroot out of grub_install command.
1643
1644 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1645 Changed chroot wrapper code in spawn() to write the wrapper the python way
1646 instead of the bash way to avoid quote conflicts. Added
1647 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1648 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1649 as it breaks the piping.
1650
1651 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1652 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1653
1654 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1655 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1656 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1657 GLIInstallProfile.
1658
1659 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1660 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1661 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1662 into /mnt/gentoo in prepare_chroot()
1663
1664 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1665 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1666 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1667 to start/end sectors
1668
1669 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1670 Add 2>&1 to cmd in spawn()
1671
1672 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1673 Modified GLIUtility.exitsuccess() to work with return value from
1674 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1675 creates wrapper script for commands run inside chroot so multiple commands
1676 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1677 for the generated script from spawn()
1678
1679 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1680 Removed default values for stage tarball URI and portage tree URI from
1681 InstallProfile. These should be set by the FEs. also added services step to
1682 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1683 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1684
1685 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1686 Small fix for setting the default gateway. Also added feature to dialogfe.
1687
1688 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1689 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1690
1691 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1692 Fixed a bunch of true -> True typos. lots of em
1693 only write new resolv.conf if there are dns servers listed.
1694
1695 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1696 Commented out 'display_on_tty8=True' in start_portmap()
1697
1698 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1699 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1700
1701 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1702 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1703 lang parameter to __init__()
1704
1705 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1706 updates to TODO list.
1707
1708 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1709 Initial code for quickpkg GRP support. Fix loop to grab packages from
1710 'emerge -p blah'
1711
1712 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1713 check for dhcp in the network stuff and emerge it if it is.
1714 added quickpkg to TODO list
1715
1716 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1717 Changed the raising of 'warning' exceptions to a simple log of the error
1718 so that the installer can continue.
1719
1720 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1721 Some big changes. First, changed most output to display_on_tty8.
1722 Second, added log lines to all templates. Some smaller fixes such as typos.
1723 Also did some cleanups of old commented lines.
1724
1725 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1726 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1727 Undo change with fix. Escaping fix in GLIStorageDevice.py
1728
1729 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1730 more updates to TODO list. hopefully we'll soon start removing items instead
1731 of adding them.
1732
1733 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1734 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1735
1736 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1737 updated TODO list. (again)
1738
1739 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1740 changed output of portmap start to display_on_tty8.
1741 fixed bootloader for udev and multiple kernels
1742 fixed custom kernel config (again)
1743
1744 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1745 changed default value of CC._enable_ssh to True because this is smart.
1746 added code to allow custom kernel .config. may be unstable and break. sorry.
1747
1748 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1749 partition() now waits until after it checks for partition flags before delete
1750 the partitions :P
1751
1752 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1753 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1754 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1755 blank.
1756
1757 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1758 Various fixes related to the add_users function. Still not yet finished.
1759 Added things to the TODO list. Lets start using that!
1760
1761 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1762 Added code to x86Template to format newly created partitions. Also added
1763 some error checking code. GLIStorageDevice passes 'minor' with data to
1764 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1765 mounting code.
1766
1767 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1768 Took out unnecessary setting of random livecd root password. the cd already
1769 sets it randomly.
1770
1771 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1772 Took out an unneeded step from CC's run()
1773
1774 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1775 Attempt at detecting and adding windows partitions to lilo.
1776
1777 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1778 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1779 partition. fixed misc exit_status => exitstatus typo.
1780
1781 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1782 Added basic code for resizing filesystems with pyparted. Fixed code for
1783 resizing ntfs and ext2/3.
1784
1785 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1786 Fixed partition() in x86Template so that it scans through logicals and deletes
1787 before deleting containing extended partition. Also clears partition table to
1788 be safe before third pass.
1789
1790 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1791 Added mount_network_shares. not able to test it from this computer.
1792 will test when i get back to school.
1793 also added start_portmap to the client_controller as an always-do.
1794 agaffney says this is needed for NFS mounts to work.
1795
1796 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1797 Partial rewrite of partitioning code in x86Template. No longer shells out to
1798 parted to perform actions, now uses all pyparted calls. Code "works" in a
1799 test, but still needs lots of TLC. Also modified tests/install.py to work
1800 with x86Template and GLIClientConfiguration.
1801
1802 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1803 Initial move of partitioning code from ArchTemplate to x86Template.
1804
1805 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1806 Added grp_install and services to InstallProfile. forgot about the set_root_password
1807
1808 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1809 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1810 Test Install ran very well (skipping partitioning).
1811
1812 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1813 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1814 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1815 some may still have eluded me.
1816
1817 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1818 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1819 Just finished mount_local_partitions in GLIArchitectureTemplate
1820
1821 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1822 Added get_num_sectors() to GLIStorageDevice.
1823
1824 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1825 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1826 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1827 from GLIInstallProfile.
1828
1829 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1830 GLIStorageDevice returns "unknown" instead of "" for get_type()
1831
1832 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1833 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1834 actually work. Commented out resizability checking code for speed.
1835
1836 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1837 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1838 GLIStorageDevice at the suggestion of plors
1839
1840 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1841 Added a function to GLIUtility to pull a value from a make.conf-style config
1842 file. Minor type fix to GLIInstallProfile.py
1843
1844 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1845 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1846 network mounts from partition data structure in GLIInstallProfile
1847
1848 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1849 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1850 can be resized.
1851
1852 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1853 Added some of the final functions to GLIInstallTemplate.
1854 Yes this project is still active despite rare use of the Changelog!
1855
1856 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1857 Added the GLIPartitionTools.py file. This is a temporary insertion of
1858 partitioning tools that will eventually go into their own package.
1859
1860 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1861 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1862 for the program). Added __init__(install_profile, client_configuration) to
1863 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1864 to avoid constantly passing stuff every time we call a method.
1865
1866 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1867
1868 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1869 files without messing up all the other stuff in them. This will be used for making
1870 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1871
1872 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1873
1874 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1875 have a few basic things. I added two private methods. One is _depends(). This
1876 will be used for dependency checking (ie. unpacking a tarball requires that
1877 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1878 same syntax as os.system(), however, instead of being run in the liveCD
1879 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1880 isolated the code. Hope to work more this week to get this class formed...
1881
1882 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1883
1884 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1885 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1886 to allow for easier modification (mutable, rather than immutable objects). Updated
1887 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1888 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1889 Added initial unit test code.
1890
1891 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1892
1893 Added initial changelog. Setting up the basic structure of the CVS repository
1894 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1895 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20