/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1478 - (show annotations) (download)
Wed Jul 19 23:43:25 2006 UTC (7 years, 9 months ago) by wolf31o2
File size: 79197 byte(s)
Added launch variable to the end of each try-run with auth, which should cause this to function properly.  Of course, more testing is needed.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.662 2006/07/19 23:43:25 wolf31o2 Exp $
4
5 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
6 Added launch variable to the end of each try-run with auth, which should
7 cause this to function properly. Of course, more testing is needed.
8
9 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
10 Fix a missed space in the installer script.
11
12 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
13 src/GLIClientController.py:
14 log version-stamp
15
16 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
17 Updated the installer script to allow specifying the front-end to run from
18 the command line. Currently, it only supports dialog and gtk. It still needs
19 some testing, however.
20
21 9 July 2006; Preston Cody <codeman@gentoo.org>
22 src/GLIGenDialog.py:
23 make lilo only show up for x86 if non-networkless
24
25 25 Jun 2006; Preston Cody <codeman@gentoo.org>
26 src/GLIGenDialog.py:
27 adding code to auto-add doscsi if a scsi drive detected.
28 this code is also in the gtkfe already
29
30 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
31 src/GLIPortage.py:
32 pass proper PORTAGE_TMPDIR
33
34 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
35 src/GLIUtility.py:
36 fix list_mirrors() to ignore <uri> lines that don't end on the same line
37
38 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
39 Added code to the mta step in AT to parse the install packages list and
40 look for mtas and if it finds it emerge it.
41 Initial attempt at moving extra_packages early in the setup to only show
42 local USE flags relating to those packages.
43 .. abandoned local USE project. no right way to do it.
44
45 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
46 src/GLIUtility.py:
47 minor tweak to regex for parsing mirrors.xml
48
49 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
50 src/templates/x86ArchitectureTemplate.py:
51 make use of strict_start and strict_end in partition recreation
52
53 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
54 src/templates/x86ArchitectureTemplate.py:
55 add strict_start and strict_end parameters to _add_partition()
56 add _find_current_minor_for_part() function to help with resizing
57 fix logical/extended logic in _partition_delete_step()
58 in _partition_resize_step(), delete, recreate at new size, resize, delete
59 call resize2fs with no size argument so it fills entire partition
60 more logging
61 only delete, recreate, resize, delete if growing
62 pass new size to resize2fs in K
63
64 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIStorageDevice.py:
66 call reorder_minors() from tidy_partitions() instead of
67 set_partitions_from_disk()
68 add code to reorder_minors() to take extended/logical into consideration with
69 non-free partitions
70
71 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
72 added a check of the length of the directory in /usr/src if under 6 characters
73 should fix bug 131809
74
75 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/GLIArchitectureTemplate.py:
77 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
78 and livecd-kernel
79
80 16 Apr 2006; Preston Cody <codeman@gentoo.org>
81 src/GLIGenDialog.py:
82 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
83
84 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
85 src/GLIInstallProfile.py:
86 change kernel-modules to not be so stupid
87
88 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
89 GLIMD: fix display problem with execute.pyhtml.
90 make tables better.
91
92 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
93 src/GLIInstallProfile.py:
94 fix handling of int/float for minor
95 src/templates/x86ArchitectureTemplate.py:
96 save/restore partition name
97 src/GLIStorageDevice.py:
98 support for partition name
99
100 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
101 touchups to add_profile in GLIMD to link to webgli
102 add a save to GLIMD profile button in webgli's saveprofile
103 gliserv.py:
104 initial attempt at custom networking info per client. hostname support only.
105
106 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
107 src/net/server/html/webgli/partitioning[234].pyhtml:
108 small fixes for new partioning code
109
110 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIClientController.py:
112 record PID of secondary thread
113
114 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIGenDialog.py:
116 small fix for new partitioning code
117
118 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIStorageDevice.py:
120 add get_devnode()
121 fix up detect_devices() to detect cciss/ida arrays
122 src/templates/x86ArchitectureTemplate.py:
123 use get_devnode() instead of figuring out the devnode
124 skip first 3 steps if partition layout hasn't changed
125 wipe disk and create new disklabel before recreating partitions
126 src/GLIArchitectureTemplate.py:
127 use get_devnode() in local mount and fstab stuff
128
129 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
130 src/GLIStorageDevice.py:
131 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
132
133 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
134 src/templates/x86ArchitectureTemplate.py:
135 continue breakup/cleanup of partitioning code
136
137 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
138 src/GLIStorageDevice.py:
139 set disklabel to default for arch when clearing the partition table
140 src/templates/x86ArchitectureTemplate.py:
141 complete rewrite of first and second passes
142
143 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
144 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
145 allow iterating over Device object to get partitions
146
147 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
148 src/GLIStorageDevice.py:
149 allow access to Device object like a dict
150
151 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIStorageDevice.py:
153 allow access to Partition object like a dict
154
155 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
156 src/templates/x86ArchitectureTemplate.py:
157 fail if any filesystems are mounted on the device being partitioned
158
159 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
160 src/GLIStorageDevice.py:
161 reorder minor numbers when loading partitions from disk to match the physical
162 partition order
163
164 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
165 src/GLIStorageDevice.py:
166 overhaul for supporting mac disklabels and partitions out of disk order
167 remove free space from inside extended partition when extended is removed
168
169 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
170 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
171 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
172 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
173 Added bash scripts, icons, and desktop entries from the ebuild to make my
174 life easier.
175
176 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
177 src/GLIStorageDevice.py:
178 raise an exception if the existing partitions are out of disk order
179 look for minors out of order instead of disk position
180
181 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
182 src/fe/dialog/gli-dialog and src/GLIGenDialog:
183 added networkless mode to gli-dialog.
184
185 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
186 src/templates/x86AT:
187 add windows detection code for grub. untested.
188
189 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
190 src/templates/x86ArchitectureTemplate.py:
191 bootloader and partitioning external commands log to compile_output.log
192 wait for device node to exist before resizing
193 add -v to ntfsresize command
194 src/GLIStorageDevice.py:
195 return start/end with ip structure
196 pad min ntfs size by 50 MB just to be safe
197 src/GLIArchitectureTemplate.py:
198 only install filesystem tools for partitions with a mountpoint
199
200 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
201 add error catching and text to saving profile dialogs
202
203 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
204 src/GLIPortage.py:
205 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
206 src/templates/x86ArchitectureTemplate.py:
207 fix checks for changed partitions so they will actually get deleted
208
209 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIClientController.py:
211 slightly better error handling for pre-install failures
212
213 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
214 src/templates/x86ArchitectureTemplate.py:
215 proper return code checking for ext2/3 resizing
216
217 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
218 src/GLIClientController.py:
219 accept 'none' as well as 'null' for network type
220 src/GLIArchitectureTemplate.py:
221 ignore extended partitions in mount_local_partitions()
222 src/templates/x86ArchitectureTemplate.py:
223 use get_ordered_partition_list() instead of keys().sort() for new_part_list
224 check to make sure start sector for primary isn't less than end sector for
225 previous extended
226 src/GLIClientController.py:
227 write dns servers to /etc/resolv.conf
228
229 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
230 src/GLIPortage.py:
231 copy_pkg_to_chroot() uses compile_output.log for command output
232
233 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
234 only keep a 1000 line 'scrollback' buffer for the compile output and log file
235
236 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
237 src/GLIPortage.py:
238 add code make GLIPortage.py capable of being run stand-along for dynamic
239 stage3 generation and copying packages in a GRP-ish way
240 grp code fixups
241
242 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
243 src/GLIPortage.py:
244 ignore blank packages passed to get_deps() and emerge()
245
246 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
247 src/GLIUtility.py:
248 add get_chosts() function
249
250 *GLI-0.3 (12 Feb 2006)
251
252 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
253 src/templates/x86ArchitectureTemplate.py:
254 pull old start/end sector values from somewhere that actually has them
255 add logic for extended partition to code that makes sure new end sector
256 doesn't overlap start sector of next partitions
257 don't freak out if partition can't be deleted
258
259 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
260 src/GLIPortage.py:
261 run env-update at the end of copy_pkg_to_chroot()
262
263 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
264 src/templates/x86ArchitectureTemplate.py:
265 I'm a complete fscking dumbass. I recorded the end sector for partitions that
266 weren't being touched, but I never used it when recreating them...the end was
267 calculated from the size in MB instead :/
268
269 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
270 src/GLIArchitectureTemplate.py:
271 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
272 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
273 src/GLIPortage.py:
274 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
275 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
276 'resized' flag
277
278 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
279 src/GLIPortage.py:
280 short circuit and check vdb directly if package begins with '='
281
282 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
283 added more packages to extra_packages list in IP
284
285 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
286 src/templates/x86ArchitectureTemplate.py:
287 10 tries to create filesystem instead of 3
288 src/GLIPortage, src/GLIArchitectureTemplate.py:
289 ignore_missing flag for copy_pkg_to_chroot()
290
291 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
292 src/GLIPortage.py:
293 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
294
295 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 src/net/server/gliserv.py:
297 fix handling of 404 for real files
298 src/net/server/GLIServerProfile.py:
299 look for 'hostname' in attributes instead of 'name'
300
301 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
302 src/SimpleXMLParser.py:
303 initial support for 'include' in XML files
304 src/GLIStorageDevice.py:
305 initial support for %
306 src/GLIClientController.py:
307 add debugging statements to pre-install steps
308
309 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
310 webgli/configfiles:
311 check for key in etc_files['rc.conf'] to fix key error
312 webgli/timezone: small fix.
313 webgli/extrapackages: list-type fix
314 webgli/services: same
315 glimd: add/edit_client updates.
316
317 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
318 added configure.pyhtml to glimd. minor changes
319 to top and add_client. fixed up showargs.
320 added execute.pyhtml
321 changed register clients line in gliserv for name->hostname.
322 updated TODO.
323
324 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
325 src/net/server/*:
326 added add/del/edit client/profile.pythml for glimd.
327 updated templates, showclients, and gliserv.
328
329 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
330 src/net/server/*:
331 stupid threading module...
332
333 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
334 AT: rc.conf -> conf.d/clock
335
336 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
337 src/GLIPortage.py:
338 show 'Calculating dependencies for ...' in subprogress bar at beginning of
339 emerge()
340 src/GLIArchitectureTemplate.py:
341 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
342 in the chroot
343 remove _quickpkg_deps() and _portage_best_{visible,version}()
344 src/GLIUtility.py:
345 fail immediately in validate_uri() if provided URI can't be parsed
346 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
347 debug code in spawn()
348 use lower-level os.read() instead of file.read() because python sucks
349 src/templates/x86ArchitectureTemplate.py:
350 basic subprogress reporting for partitioning
351 total_steps was 1 too high
352
353 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
354 src/GLIUtility.py:
355 move parse_vdb_contents() to GLIPortage
356 src/GLIPortage.py:
357 remove all symlink fixups
358 ignore 'dir' entries in CONTENTS
359 call tar with -p
360
361 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
362 AT: bootsplash is now gensplash
363 gliserv: add advanced_mode to shared_info
364 webgli: Added advanced mode. mostly just disables a few screens.
365
366 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
367 src/GLIPortage.py:
368 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
369 added emerge()
370 update sub-progress after each package is emerged
371 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
372 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
373 remove link if it exists before moving content into place
374 src/GLIArchitectureTemplate.py:
375 install_packages() now calls emerge() in GLIPortage
376 change all calls to self._emerge() to self._portage.emerge()
377 comment out all emerge status checking...using exceptions now
378 call copy_pkg_to_chroot() directly for livecd-kernel
379
380 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
381 src/GLIArchitectureTemplate.py:
382 remove add_pkg_to_world() and copy_pkg_to_chroot()
383 copy installer.log to installer.log.failed on install failure
384 src/GLIUtility.py:
385 added get_keymaps()
386 spawn() takes any False argument for chroot instead of just None
387 src/GLIPortage.py:
388 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
389 change copy_pkg_to_chroot() to work properly with use_root=False
390 figure PORTAGE_TMPDIR properly
391
392 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
393 src/net/server/html/*:
394 converted showclients, load/saveprofile
395
396 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
397 src/GLIPortage.py:
398 exclude packages already in chroot vdb from binary deplist
399 chroot to use best_version for chroot's vdb
400 src/runtimedeps.py:
401 accept ROOT via commandline instead of env
402
403 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
404 src/runtimedeps.py:
405 remove passing of ROOT
406 src/GLIPortage.py:
407 modify get_deps() to get deptree for each package and merge into final list
408 remove depgraph class
409 add debugging code to get_deps()
410 src/GLIArchitectureTemplate.py:
411 combine code for GRP/compile in install_packages() into one block
412 debugging code in install_packages()
413
414 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
415 src/runtimedeps.py:
416 initial commit
417 src/GLIPortage.py:
418 use separate script for GRP deps
419 remove calls to portage module
420
421 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
422 src/GLIPortage.py:
423 initial commit
424 move some of portage function from GLIAT
425 flipped around a few function args
426 src/GLIArchitectureTemplate.py:
427 revamp install_packages() for new GLIPortage
428
429 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
430 src/GLIArchitectureTemplate.py:
431 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
432
433 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
434 src/net/server/gliserv.py:
435 wrap generated code in a class to isolate it a bit better
436 302 redirects work
437 don't use cgi.escape() for <% %>
438 src/net/server/html/webgli/*:
439 load/save profile
440 src/GLIUtility.py:
441 change /sbin/lspci to just lspci
442
443 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 src/GLIClientController.py:
445 change ordering of statements in CC run() while loop to not go past the end
446 of the array
447 src/GLIArchitectureTemplate.py:
448 removed redundant bind mounts
449
450 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
451 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
452 added a diagram by blackace from last night.
453 added the glossary in RTF format.
454
455 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
456 x86AT: separated out emerge/configure from running of bootloader
457 added MBR drive support to lilo.
458 these changes will likely not work.
459 AT: added setup_and_run_bootloader step.
460
461 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 src/net/server/gliserv.py:
463 call generated code in a function
464 src/net/server/html/webgli/*:
465 include top/bottom
466 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
467 src/GLIClientCongifuration.py:
468 install mode magic
469
470 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
471 src/GLIClientController.py:
472 use GLIException when there's an import problem
473 added debug code to show install_steps
474 src/templates/amd64ArchitectureTemplate.py:
475 add . to import path
476 proper path this time: ../../templates
477 src/GLIArchitectureTemplate.py:
478 add _portage_best_version() function
479
480 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
481 added initial glossary and gimli diagram to the docs directory.
482 modify gli-dialog to allow editing of the install_profile after loading XML.
483
484 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
485 src/net/server/html/webgli/:
486 converted globaluse, localuse, networkmounts, portagetree, and stageselection
487 moved saveclientconfig stuff into clientconfig
488 moved saveconfigfiles into config files
489 converted etc_portage and makedotconf
490 converted bootloader and kernel
491 convert daemons, extrapackages, networking, review, services, timezone, users
492 src/net/server/gliserv.py:
493 proper 404 handling for .pyhtml extension
494 HTML escape <% %> stuff
495 work around python's sucky regexes
496 src/GLIInstallProfile.py:
497 allow set_{rsync,ftp,http}_proxy() to accept empty values
498
499 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
500 src/net/server/gliserv.py:
501 initial commit of Legolas templating engine
502 302 redirects
503 src/net/server/html/index.html, src/net/server/webgli_template.html:
504 minor changes for new code
505 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
506 initial commit of the conversion from the monolithic WebGLIHandler.py to the
507 one file per path Legolas goodness
508 partitioning[2-4] done
509
510 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
511 webgli: dhcp options in CC and post-install.
512 updated comparison chart.
513 webgli: etc/portage/* and distcc support added. not too-well tested.
514
515 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
516 webgli_template.html: valign=top on left side.
517 webgli: fix bootloader boot_device. now working.
518 webgli: CC proxy done. post-install proxy in progress.
519
520 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
521 src/net/server/webgli_template.html:
522 increase padding for content cell to 7px and add colspan=2
523
524 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
525 webgli: added graphic bar on top
526 webgli: added hover effects on the links on the left
527 webgli: re-rendered header_bg.png to stretch without artifacts
528
529 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
530 webgli: make.conf disabling fixes for dynamic_stage3
531 fixed portage snapshot browse popup
532 all changes tested.
533 webgli: add debug mode to CC screen. the screen still needs lots of work.
534
535 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
536 added debug mode question to gli-dialog
537 added CC proxies to CC networking for gli-dialog
538 webgli: fixed skip CC networking if connection active
539 webgli: portage snapshot defaults to CD
540 webgli: bootloader mbr drive selection
541 webgli: USE flags unselectable if dynamic_stage3
542 webgli: manual extra packages and save button.
543
544 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
545 src/GLIUtility.py:
546 change ping count to 2
547 docs/comparison.html
548 initial commit
549
550 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
551 src/templates/x86ArchitectureTemplate.py:
552 fix map() issue with grub code
553 replace kernel_names and initrd_names loops with one-liners
554
555 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
556 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
557 initial gli-dialog support for recommended partitioning layout and clear.
558 failure cleanup now an option for gli-dialog.
559 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
560 added comparison list and updated TODO!
561
562 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
563 src/GLIArchitectureTemplate.py:
564 fix to stage1() debug code
565 fix to stage2() debug code
566
567 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
568 some more bootloader code fixes. forgot boot_device != mbr_device.
569
570 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
571 src/GLIStorageDevice.py:
572 fix to unallocated space merging when last one is after part 4
573
574 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
575 src/GLIArchitectureTemplate.py:
576 small fix to debugging code in copy_pkg_to_chroot()
577
578 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
579 more bugfixes with bootloader code
580 gli-dialog side appears to work
581
582 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
583 initial adding of boot_device to backend.
584 initial boot_device support added to gli-dialog.
585 some fixes of my poor coding
586
587 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
588 converted gli-dialog to use the install_package_list.
589 gtkfe has already been converted by AllanonJL
590 new way working in gli-dialog now and added to webgli.
591 added set/get_boot_device() to IP
592
593 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
594 get_install_package_list added to InstallProfile. This can be used by the FEs
595
596 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
597 src/templates/x86ArchitectureTemplate.py:
598 call ls with '-1 --color=no'
599
600 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
601 added warning (#9) to GRP ppl about stage3 tarballs
602
603 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
604 src/GLIArchitectureTemplate.py:
605 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
606 confused
607
608 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
609 removed protocols from rc.conf screens
610 finished initial rc.conf and make.conf in webgli
611
612 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
613 src/net/server/gliserv.py:
614 add -h option to usage()
615 show time and request URI in debug mode
616 show client IP in debug mode
617 just use IP instead of trying to do a reverse lookup
618
619 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
620 src/net/server/gliserv.py:
621 'classier' 401 message
622 proper commandline parsing
623 help via -h
624 user/pass can be specificed via commandline option
625
626 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
627 src/net/server/gliserv.py:
628 basic HTTP auth
629
630 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
631 src/net/server/gliserv.py:
632 dynamic module reloading (yipee!)
633 send 'Last-Modified' header for real files
634 respond to HEAD with just headers
635 src/net/server/handlers/WebGLIHandler.py:
636 icons for drives
637
638 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
639 src/net/server/handlers/WebGLIHandler.py:
640 initial 'pretty' partition table display support
641 clicking partition in 'pretty' display works instead of radio buttons
642 radio buttons and pretty display work together
643 META redirect instead of javascript
644 pretty display stretches across entire screen
645 'Recommended layout' and 'Clear drive' functions
646 properly catch exceptions from do_recommended()
647 src/GLIArchitectureTemplate.py:
648 replace preinst, copy, postinst, rm steps with qmerge
649 whoops...that shouldn't have been commented out
650 create image_dir with -p in copy_pkg_to_chroot()
651 more generic of symlink crappiness
652 new copy_pkg_to_chroot() actually works now
653
654 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
655 src/GLIStorageDevice.py:
656 initial generic disk support
657 fixes for add_partition() code
658 src/net/server/handlers/WebGLIHandler.py:
659 added support for creating generic disks
660 add new partition working
661 save and delete partitions
662
663 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
664 webgli: Partitioning making progress.
665
666 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
667 src/GLIArchitectureTemplate.py:
668 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
669 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
670 dir) and works around /etc/gconf symlink problem
671
672 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
673 webgli: lots of updates. preliminary partitioning. extra packages works.
674
675 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
676 src/net/server/gliserv.py:
677 httpd now supports HTTPS and falls back to HTTP if not available
678 make fallback actually work
679 src/net/server/SecureXMLRPCServer.py:
680 SecureSocketServer is now threaded
681
682 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
683 src/net/client/gliclient.py:
684 try to use HTTPS for XMLRPC first and fallback to HTTP
685 pretend mode
686 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
687 HTTPS XMLRPC goodness from samyron
688 pass name of certificate
689
690 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
691 wegli: daemons and services screens done.
692
693 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
694 webgli: networking and users screens
695 added return_redirect to handler.py
696 loading and saving install/client profiles works for webgli now
697 Review also done
698
699 *GLI-0.2 (27 Oct 2005)
700
701 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 src/templates/x86ArchitectureTemplate.py:
703 properly check for bootloader emerge exist status with exitsuccess()
704 log output of grub install command
705 add --batch --no-floppy to grub command
706 grubinstallstring only gets logged if debug is on
707 src/GLIUtility.py:
708 update progress bar to 100% when process finishes
709
710 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
711 src/GLIClientController.py:
712 added debugging code for the interaction between the 2 threads via Event()
713 src/GLIUtility.py:
714 doubled the buffer size in spawn()
715 bump buffer size up to 16384
716 only report progress in 5% increments
717 src/GLIArchitectureTemplate.py:
718 kernelpkgs.txt support code
719 above disabled because it sucks
720 added add_pkg_to_world()
721
722 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
723 src/GLIArchitectureTemplate.py:
724 use tar | tar to copy files in copy_pkg_to_chroot()
725 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
726
727 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
728 DEBUGGING ADDED TO AT. verbose field added to CConfig.
729
730 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
731 src/net/server/gliserv.py:
732 / maps to index.html
733 look for actual files in html/
734 src/net/html:
735 new template
736 src/GLIUtility.py:
737 added parse_vdb_contents()
738 src/GLIArchitectureTemplate.py:
739 added copy_pkg_to_chroot()
740 added debug code to dynamic-stage3
741 switch dynamic-stage3 to new method
742 lots of bug fixes from adding debug code
743
744 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
745 webgli initial bootloader support + changed make.conf.
746 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
747
748 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
749 src/GLIUtility.py:
750 horrible tangled mess of code that is tarball unpacking subprogress display
751 add unpack progress to portage snapshot
752 use read() instead of readlines() in spawn()
753 only update progress bar for whole percents
754
755 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
756 src/templates/x86ArchitectureTemplate.py:
757 change call to 'grub' to use GLIUtility.exitsuccess()
758 add definition of 'build_mode' in _configure_lilo()
759 src/misc/updategtkfe, src/misc/updateglid:
760 fix so subshell is called in root shell
761
762 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
763 src/net/server/handlers/WebGLIHandler.py:
764 stage screen launches URI browser in sized window with various properties set
765
766 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
767 src/misc/updategtkfe:
768 updated to actually work
769 remove previous snapshot and extracted dir before downloading
770 src/misc/updateglid:
771 updated to actually work
772 src/templates/x86ArchitectureTemplate.py:
773 fixed bug where grub code was looking for 'root+root+file_name2'
774
775 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
776 src/net/server/handlers/WebGLIHandler.py:
777 URI browser
778 added mirror selection
779 src/GLIUtility.py:
780 ls via ssh strips off ending *
781
782 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
783 more updates to webgli. stage selection.
784
785 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
786 updated webgli with preliminary Network Mounts support.
787
788 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
789 GenDialog: string formatting and yes/no label fixes.
790 added WebGLI template for gliserv.py
791 added WebGLIHandler as well as a definition for it in gliserv.py
792 updates to the webgli files even though they won't be there for long.
793 Utility: remove exception for non-existant grppkgs.txt until the new livecd
794 goes public.
795
796 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
797 src/net/server/gliserv.py:
798 override dict to not be so anal
799 main server now loads separate module to handle requests
800 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
801 split out profile URLs into separate handler function
802 move handlers into subdirectory
803 add Welcome and Clients handlers
804
805 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
806 src/GLIUtility.py:
807 raise exception if password prompt received twice
808
809 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
810 src/GLIUtility.py:
811 removed rot13ify()
812
813 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
814 src/net/server/gliserv.py:
815 allow for param to be passed multiple times in GET
816 no XMLRPC functions return None
817 modify POST request parsing to only create a list if needed
818 fix GET request parsing so the list creation for multiple values works
819 src/net/client/gliclient.py:
820 various typo and type mismatch fixes
821 exit after exception
822
823 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
824 src/net/client/gliclient.py:
825 initial commit
826 pass MAC to XMLRPC functions
827 src/net/server/GLIServerProfile.py:
828 rename GLIClientsProfiles to GLIServerProfile
829
830 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
831 src/net/server/gliserv.py:
832 now handles POST requests
833 move majority of request handling code to common_handler() to reduce code
834 duplication
835 profile loading
836 client reg via XMLRPC goes into SharedInfo()
837 /showclients redesign
838 template fixes
839 allow handler functions to add/change headers
840 save profile
841
842 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
843 src/net/server/GLIClientsProfiles.py:
844 initial commit
845 src/net/server/template.html:
846 initial commit
847 src/net/server/gliserv.py:
848 add template mojo
849
850 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
851 src/net/server/gliserv.py:
852 XMLRPC mojo
853
854 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
855 src/GLIArchitectureTemplate.py:
856 add code in _edit_config() to comment line where variable is defined
857 previously
858 insert new line under previous definition of variable if it exists
859 small _edit_config() cleanup
860 src/GLIStorageDevice.py:
861 add clear_partitions() function
862 new sizes for recommended partition layout
863 automatically calculate swap size for recommended layout
864
865 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
866 src/templates/x86ArchitectureTemplate.py:
867 fat16 mojo
868
869 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
870 src/GLIStorageDevice.py:
871 prevent do_recommended() from being run twice
872 rewrite do_recommended() to be more robust
873 src/GLIArchitectureTemplate.py:
874 rework _edit_config() to not write duplicate entries
875
876 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
877 src/GLIStorageDevice.py:
878 added do_recommended() function to automatically created 256M/1G/* layout
879
880 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
881 src/gli-dialog.py: added set_distcc to the list
882 GenDialog: added set_distcc. untested.
883 IP: added install_distcc flag.
884 AT: added install_distcc function based on the flag. runs after build_kernel
885 changed AT spawn command for distcc for nodeps.
886
887 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 src/GLIUtility.py:
889 add rot13ify() function
890
891 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
892 src/GenDialog.py:
893 added a sentence of text. unchecking support added.
894
895 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
896 src/GLIUtility.py:
897 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
898 src/GenDialog.py:
899 still working on extra_packages. transformed the list to new format.
900 added GRP indication to list. untested.
901 TODO lists updated.
902 src/fe/dialog/gli-dialog.py:
903 spelling mistook.
904
905 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/GLIUtility.py:
907 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
908
909 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
910 src/GLIUtility.py:
911 add get_directory_listing_from_uri()
912 add http support to above
913 add ftp support to above
914 add scp support to above
915 src/GLIArchitectureTemplate.py:
916 "0" instead of 0 for key of single-element dict passed to _edit_config()
917
918 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
919 value_only -> only_value
920
921 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
922 gutted out all of etc_portage structure since it is now all handled by
923 etc_files
924
925 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
926 src/GLIArchitectureTemplate.py:
927 install_packages() sends progress update notifications
928 src/templates/x86ArchitectureTemplate.py:
929 increase sleep to 5s between format tries
930 src/GLIClientController.py:
931 pass 'self' to AT instead of 'self._pretend'
932
933 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
934 logger -> logger.log in x86AT
935
936 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
937 added set_etc_portage to IP. debugging gli-d's support for it.
938
939 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/templates/x86ArchitectureTemplate.py:
941 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
942
943 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 src/GLIArchitectureTemplate.py:
945 add _portage_best_version() function and rework install_packages() to allow
946 for future X of Y tracking
947 Use best_visible instead of best_version
948 tracked down and fixed missing = causing empty install extra packages
949 use = when emerging also
950 quickpkg hokey pokey
951 run _get_packages_to_emerge() again with -pk
952
953 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
954 src/ArchTemplate:
955 removed install_xorg_x11, and put the xorg.conf copying at
956 the end of install_packages.
957 added updateglid to /src/misc
958 updated all core files with new GPL notice and copyright statement.
959
960 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
961 src/GLIUtility.py:
962 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
963 a snapshot in /mnt/cdrom/snapshots/
964 get_snapshot_from_cd() adds file:// at the beginning
965 change calls to extra package special case functions to 'self.blah'
966
967 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
968 src/ArchTemplate: changed "voodoo".
969 changed order of portage sync methods. made a fallback to webrsync if
970 normal emerge sync fails.
971 removed get_sources_from_cd because it is obsolete.
972 add special cases to install_packages. remove fatal exception on package
973 install failure b/c the box will still be bootable.
974 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
975 handled in the FEs.
976 src/GenDialog: added a bunch of code for dealing with x11-based packages.
977 awaiting testing.
978
979 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
980 src/GLIStorageDevice.py:
981 global try/except block around fs resizable detection code
982 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
983 install-failed cleanup function
984
985 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
986 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
987
988 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
989 GLIGenDialog:
990 add drive choices for loaded configs.
991 force snapshot for dynamic_stage3
992 init the snapshoturi input to the cd snapshot if not already selected.
993 if dynamic_stage3, skip the make.conf step.
994 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
995 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
996
997 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
998 src/GLIArchitectureTemplate.py:
999 manually call MAKEDEV in stage3-dynamic code
1000 copy /etc/inittab.old to /etc/inittab in chroot
1001 src/GLIUtility.py:
1002 add beginning of validate_uri() function
1003 add file:/// support to validate_uri()
1004 single quotes when setting livecd password
1005
1006 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1007 src/GLIGenDialog.py:
1008 change getmountpoint() to get_mountpoint()
1009 src/misc/updategtkfe:
1010 committed script to automatically download latest snapshot and run gtkfe
1011 src/templates/x86ArchitectureTemplate.py:
1012 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1013 src/GLIArchitectureTemplate.py:
1014 give tmp_minor an initial value in mount_local_partitions so that the value
1015 remain from the previous drive
1016
1017 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1018 src/templates/x86ArchitectureTemplate.py:
1019 Fix _configure_lilo() for IP using GLISD stuff
1020 src/GLIArchitectureTemplate.py:
1021 install_cron_daemon() treats "none" specially
1022
1023 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1024 old patch from Steven Mertens to resolve bug #96642
1025 numerous asthetic changes to GenDialog, no real functionality changes though.
1026 strings renamed for global use if necessary.
1027 fix all three parts of bug 102291
1028 disable set_etc_portage until fully-written.
1029
1030 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1031 src/GLIClientController.py:
1032 lower-case http/ftp proxy envvars
1033
1034 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1035 src/GLIClientController.py:
1036 log end of pre_install steps to aid in debugging
1037 src/templates/x86ArchitectureTemplate.py:
1038 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1039
1040 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1041 src/GLIArchitectureTemplate.py:
1042 check to make sure that the device node we're wait for to exist isn't of
1043 type 'free'
1044
1045 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1046 src/GLIGenDialog.py:
1047 convert install_packages to list in set_extra_packages()
1048 check return code of checklist() call in "Manual" section
1049 *actually* fix the first problem
1050
1051 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1052 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1053 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1054
1055 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1056 src/GLIArchitectureTemplate.py:
1057 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1058
1059 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1060 Add CDATA support to SimpleXMLParser and add utility functions for it.
1061
1062 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1063 src/GLIArchitectureTemplate.py:
1064 Fix case where vixie-cron is specified as a full package atom, as we still
1065 don't want to run 'crontab /etc/crontab' for it.
1066
1067 *GLI-0.1 (3 Aug 2005)
1068
1069 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1070 add scp to list of is_uri() so GenDialog doesn't complain.
1071 fixed livecd-kernel bug in bootloader code.
1072 fixed gendialog for dynamic_stage3 instead of "networkless"
1073 change bootloader to allow for both initrd and initramfs.
1074 fix IP for dynamic_stage3.
1075 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1076
1077 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 Added full scp:// URI support to get_uri() in GLIUtility
1079 Remove "networkless" from dynamic stage3 if locic.
1080 Remove print statement from scp:// code.
1081 Change scp code to check for "assword: " instead of "Password:"
1082 Fix post-install network code to create net.eth1+ symlink correctly
1083 Check to make sure pkg can be split on / and some debugging code
1084 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1085 SimpleXMLParser handles True/False/None correctly now
1086 Comment out above fix
1087 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1088
1089 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1090 Removed a FIXME in the GLIClientConfiguration that is no
1091 longer needed.
1092
1093 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1094 Default to x86 in ClientConfig
1095 Typo in build-a-stage3 code.
1096 Remove MAKEDEV call in build-a-stage3 postscript.
1097
1098 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1099 Rewrote init of IP for gli-d. Other GenDialog updates.
1100 allow network_type to be None in CConfig.
1101
1102 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1103 Add _dynamic_stage3 option to IP.
1104 Add check for that option to dynamic stage3 code in ArchTemplate.
1105 Fix code to determine default route in get_eth_info() in GLIUtility.
1106 Fix serialization of dns-servers in ClientConfig.
1107
1108 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1109 changed default values of cron/logger in IP.
1110 moved GenDialog IP init out to the individual files. gli-dialog's version
1111 will change quite a bit.
1112
1113 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1114 added ppcArchTemplate. blank now. working on yaboot.
1115 modified ArchTemplate for amd64 and ppc custom kernels.
1116 skeleton implementation of _configure_yaboot.
1117 small fixes to other templates.
1118
1119 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1120 GenDialog updates. changed comment in IP.
1121
1122 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1123 src/GLIInstallProfile.py:
1124 Fix codeman's screwup of changing the service seperator to ',' in the parser
1125 without changing it in the serialization code! Also document this in a
1126 comment so you find it easier. Everybody needs to make sure they update
1127 their install profiles!
1128
1129 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1130 src/GLIArchitectureTemplate.py:
1131 Fix casting of list to string and concat of None with string, as well as
1132 commented prototype of checking that mounting actually worked (found a case
1133 where mount can return success, but the mount won't be done).
1134
1135 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1136 src/templates/x86ArchitectureTemplate.py:
1137 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1138 checking for the device, and sleeping 1 second each time.
1139
1140 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1141 src/templates/x86ArchitectureTemplate.py:
1142 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1143 bootloader works again. Also rename _install_{grub,lilo} to
1144 _configure_{grub,lilo} since they don't install the loaders anymore
1145 themselves.
1146
1147 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1148 fix global USE flags to not include the arch types at the end.
1149 updates to GenDialog and gli-d.
1150
1151 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1152 fixing bootloader code for no initrd and initrd->initramfs naming change.
1153
1154 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1155 Proper comments and parameters to GLIException in install_mta()
1156 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1157 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1158 list_tarball_from_mirror() to eliminate blank last item.
1159
1160 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1161 Added stage3 generation code.
1162
1163 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1164 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1165 Mild changes to GenDialog.
1166
1167 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1168 Remove separate install step configure_rc_conf() since it's handled by
1169 update_config_files()
1170 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1171 function is called twice on the same file.
1172
1173 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1174 Missing \ in sed in _get_packages_to_emerge()
1175 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1176 Check in _quickpkg_deps() to ignore blank package names returned from
1177 _get_packages_to_emerge()
1178
1179 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1180 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1181 in the dialog.py gauge code.
1182
1183 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1184 Add code to update_config_files() to go through etc_files and update stuff.
1185 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1186 Only use float() in partition xml parsing code if type == "free"
1187
1188 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1189 finished almost all internationalization of GenDialog.
1190 attempt at fixing rc.conf function. moved 3 generate functions out of
1191 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1192 added dialog.py to the fe/dialog directory so it actually gets used.
1193
1194 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1195 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1196
1197 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1198 fix extra entry in list_mirrors()
1199 beginning internationalization runthrough.
1200
1201 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1202 added dialog.py to /src temporarily until it gets accepted upstream.
1203 fix for unused value in form in dialog.py and changed heights.
1204 fix GenDialog forms.
1205
1206 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1207 Changed hostname/domainname for new baselayout.
1208 Changed _add_to_runlevel errors to logs.
1209 Updated TODO list to show status of GenDialog
1210 More updates to GenDialog including two checklists that probably won't work.
1211 update IP to use comma-separated list instead of space separated for services.
1212
1213 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1214 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1215 GenDialog as it gets closer to completion.
1216
1217 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1218 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1219 instead of int() in add_partition_device_partition() for minor (closes 96804)
1220
1221 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1222 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1223 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1224 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1225
1226 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1227 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1228 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1229 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1230 Fix undefined variable 'output' issue in spawn().
1231
1232 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1233 More updates to GenDialog and gli-d.
1234
1235 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1236 Modify list_mirrors() to return a list of mirror URL/name pairs.
1237
1238 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1239 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1240 get subarch.
1241
1242 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1243 Backend partitioning will create disklabel is none exists. Installprofile
1244 defaults to "" now instead of "msdos" for disklabel type. Fix for
1245 mount_local_partitions() to remember device along with minor in the
1246 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1247 add else block to log unsupported netmount types to mount_network_shares()
1248
1249 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1250 src/GLIArchitectureTemplate.py:
1251 Refactor kernel_compile common stuff, fix 2.4 build process.
1252 src/fe/cli/clife.py:
1253 Logging system.
1254 src/GLIUtility.py, src/GLIStorageDevice.py:
1255 Add comments about re-writes needed for boxes without sysfs.
1256
1257 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1258 src/GLIArchitectureTemplate.py:
1259 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1260 'make dep' call for custom compile. build_mode support for prepare-only and
1261 none types completed. custom compile function chains shell functions in
1262 spawned script, to allow for catching all errors.
1263
1264 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1265 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1266 and GenDialog. other gendialog updates as well. kernel updates untested.
1267
1268 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1269 src/GLIInstallProfile.py:
1270 Change structure of etc-portage stuff. The serialization was broken before my
1271 last commit, and I am the only person that's ever used it. The new schema is
1272 as follows:
1273 <etc-portage>
1274 <file name="package.mask"/>
1275 <file name="package.unmask">
1276 <entry atom="sys-kernel/openmosix-sources"/>
1277 </file>
1278 <file name="package.use">
1279 <entry atom="sys-libs/db">
1280 -java
1281 </entry>
1282 <entry atom="dev-libs/cyrus-sasl">
1283 -ldap
1284 </entry>
1285 </file>
1286 </etc-portage>
1287
1288
1289 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1290 src/GLIInstallProfile.py:
1291 Add new entry for gli-profile/kernel-build-method item. Add missing
1292 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1293 keys in the same order.
1294
1295 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1296 src/GLIArchitectureTemplate.py:
1297 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1298 was repeatedly appended to make.conf.
1299
1300 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1301 src/GLIArchitectureTemplate.py:
1302 Put some Linux-2.6 specific code under a if statement. Store list of
1303 successfully mounted swap device for using swapoff. Add proper error checking
1304 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1305 'file'. Clean up some redundant code (thanks to pychecker).'
1306
1307 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1308 Fix typos: get_extended() instead of get_extended_partition(). Added
1309 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1310 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1311
1312 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1313 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1314 in add_network_interface.
1315
1316 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1317 src/GLIArchitectureTemplate.py:
1318 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1319 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1320 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1321 prepare_chroot.
1322
1323 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1324 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1325 +src/fe/installer-gtk:
1326 Add new automated CLI frontend. Add scripts that are the intended means to
1327 use each frontend.
1328
1329 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1330 src/GLIClientController.py:
1331 Add null type to network config, for cases where the interface is already up
1332 and should not be touched (netboot for example).
1333
1334 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1335 src/GLIArchitectureTemplate.py:
1336 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1337 string!. Try to use binary packages if available by default.
1338
1339 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1340 src/GLIArchitectureTemplate.py:
1341 More error checking for _add_to_runlevel, to ensure that the init script
1342 actually exists before we try to add it. set_services phase must take place
1343 after the package installation, otherwise the init scripts might not exist.
1344 Find the correct init script for the cron and logging daemons, and add that
1345 instead of the package atom.
1346
1347 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1348 src/GLIArchitectureTemplate.py:
1349 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1350 usage of 'file' to 'contents' for the variable name, as it shadows
1351 __builtin__.file.
1352
1353 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1354 src/GLIArchitectureTemplate.py:
1355 Add MTA install code, and include MTA install phase. Ensure
1356 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1357 for 'none' kernel config for build_kernel phase. Put kernel_script in
1358 /var/tmp instead of /root for build_kernel phase.
1359
1360 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1361 Rename mta variables to match syslog/cron variables.
1362
1363 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1364 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1365 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1366 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1367 src/templates/.cvsignore, src/tests/.cvsignore:
1368 Refactor partition formatting again to include error checking. Allow 'none'
1369 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1370
1371 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1372 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1373 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1374 only have a single spawn call.
1375
1376 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1377 refixed samyron's fix of set_architecture_template.
1378
1379 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1380 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1381 be executable.
1382
1383 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1384 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1385 error checking when you call set_architecture_template.
1386
1387 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1388 moved the mkfsopts input to the partition options menu instead of the during
1389 the creation process. updated GenDialog to say it supports reiserfs v3.
1390
1391 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1392 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1393 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1394 Add support for other partition types to dialogfe.
1395 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1396 avoid integer overflows and wraparounds.
1397
1398 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1399 Removed start/end from XML output and added mkfsopts to partitioning info.
1400 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1401 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1402 in GLIClientConfiguration. Change from .1 and .9 to constants for
1403 partitioning. Fix free space overwriting bug. Remove a few unused functions
1404 from rewrite. Fix call to get_partition_at()
1405
1406 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1407 Updates to GenDialog and dialogfe.
1408
1409 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1410 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1411
1412 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1413 more GenDialog updates to partitioning.
1414
1415 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1416 Indenting issue in GLISD/get_ordered_partition_list.
1417 updates to GenDialog partitioning and added default UTC for timezone in IP.
1418
1419 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1420 Added GLISD.get_model()
1421
1422 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1423 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1424 More updates to GenDialog :)
1425
1426 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1427 Added get_interface_realname() function.
1428
1429 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1430 Added auto-save of CConfig and copying to new /root after install.
1431 yet even more GenDialog updates.
1432
1433 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1434 removed print statement from GLISD. more updates to GenDialog.
1435
1436 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1437 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1438 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1439 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1440 places in GLIClientConfiguration.
1441
1442 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1443 Fix mount_local_partitions(), configure_fstab(), and
1444 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1445 A few more fixes for templates/x86Archtemplate
1446
1447 27 May 2005; Preston Cody <codeman@gentoo.org> :
1448 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1449 a work in progress.
1450
1451 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1452 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1453 directly. GLISD can now handle data imported from XML.
1454
1455 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1456 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1457 handle blank (no disklabel) disks.
1458
1459 20 May 2005; Preston Cody <codeman@gentoo.org> :
1460 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1461 up, documented, and separated out serialization and grouped all sections.
1462
1463 19 May 2005; Preston Cody <codeman@gentoo.org> :
1464 Reorganization of ClientConfiguration and gutting of unused functions.
1465 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1466
1467 18 May 2005; Preston Cody <codeman@gentoo.org> :
1468 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1469
1470 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1471 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1472 partitioning. CC serializes install profile to disk and prepare_chroot()
1473 copies it into /mnt/gentoo/root
1474
1475 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1476 Moved URI parsing into new function parse_uri()
1477
1478 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1479 Added XMLParser module.
1480
1481 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1482 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1483 Minor fix to is_uri() regex to allow hyphens in hostname.
1484
1485 12 May 2005; Preston Cody <codeman@gentoo.org> :
1486 Updated finishing_cleanup for new unmounting method from agaffney.
1487
1488 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1489 Fix GLILogger to use correct time format string. Fix _edit_config() to
1490 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1491 unicode support to is_realstring().
1492
1493 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1495 return value instead of non-zero. Add code to output a traceback to the
1496 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1497 instead of --nocolor.
1498
1499 10 May 2005; Preston Cody <codeman@gentoo.org> :
1500 Added GLIGenDialog.py to make a generic class for the dialog functions that
1501 can be used by both dialogfe and the netfe/be. updated both for new filename.
1502 date changes. 2004->2005.
1503
1504 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1505 Removed 'quiet=True' from spawn() calls
1506
1507 10 May 2005; Preston Cody <codeman@gentoo.org> :
1508 Updated GLIUtility with patches from chotchki. Also added documentation
1509
1510 9 May 2005; Preston Cody <codeman@gentoo.org> :
1511 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1512 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1513 from bug #89683, mostly touchups.
1514
1515 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1516 GLIStorageDevice cleanup patch from bug #91761
1517
1518 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1519 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1520 _edit_config(). Error logging casts 'error' to str
1521
1522 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1523 Exceptions received in CC are logged before being passed to the FE. Added
1524 code to CC to handle exceptions *not* thrown by the installer itself.
1525
1526 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1527 get_max_mb_for_resize() returns -1 if not self.resizeable
1528
1529 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1530 More dirty rsync hacks :-/
1531
1532 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1533 Patches from chotchki (bug #90325) to improve CC networking. untested.
1534
1535 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1536 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1537 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1538 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1539 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1540 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1541 _get_packages_to_emerge()
1542
1543 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1544 Added group-adding code to set_users in ArchTemplate
1545
1546 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1547 Added post-install script code
1548
1549 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1550 Fixed encapsulation issues in GLIClientController (bug #90141)
1551
1552 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 Update resizing code in GLIStorageDevice
1554
1555 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1556 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1557
1558 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 Reverted change to ArchTemplate and added support for commented line in old
1560 code.
1561
1562 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1563 Changed _edit_config() to modify value in-place instead of commenting out and
1564 adding the new value to the end of the file.
1565
1566 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1567 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1568 Also updated TODO list.
1569
1570 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1571 Use blackace's one-liner to add comments for all function for use with
1572 pythondoc.
1573
1574 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1575 Moved 'end >= device_sectors' check out of loop to check for next partition's
1576 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1577 Partitioning code now tracks start/end of extended for placing logicals. End
1578 point of logical is now adjusted along with start.
1579
1580 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1581 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1582 the way of partitioning from a blank disk. Add int() around access to minor
1583 key in partition information due to new partition code leaving them as float.
1584
1585 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1586 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1587
1588 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1590
1591 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1592 Added support for DHCP options and MAC addresses in the InstallProfile.
1593
1594 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1595 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1596 sed to properly strip out junk.
1597
1598 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1599 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1600 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1601
1602 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1603 Fixed indent problem in GLICController
1604
1605 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1606 Check for disklabel type "loop" and use the device name without a minor.
1607
1608 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1609 Remove /tmp/compile_output.log and /var/log/install.log when install is
1610 complete. Added code to (hopefully) keep 2nd thread running after install.
1611 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1612 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1613 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1614
1615 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1617 when unpacking tarball.
1618
1619 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1620 rewrote filesystem_tools. looks like it works so ripping out all the old
1621 filesystem_tools code.
1622
1623 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1624 Changed the print statements to logging in the partitioning BE code.
1625 the logger may need to be imported to the x86archtemplate. unknown yet.
1626 Added the finishing_cleanup function.
1627 added a fix to the logger from BenUrban
1628
1629 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1630 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1631 URIs. The blank uri check has been commented out.
1632 ripped out error checking of set_services. this is done by _add_to_runlevel.
1633
1634 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1635 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1636
1637 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1638 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1639 the install profile if available. Commented out spawn() debugging prints
1640
1641 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1642 small changes to setup_network_post. moved adding to runlevel of net.x to
1643 after the device gets symlinked. added domainname runlevel command.
1644
1645 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1646 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1647 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1648 spawn() call in livecd-kernel code to pass environment variables.
1649 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1650 the install profile if available.
1651
1652 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1653 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1654 to handle installing the livecd kernel into the new system.
1655
1656 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1657 should emerge hotplug and coldplug before adding them to runlevel.
1658
1659 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 took chroot out of grub_install command.
1661
1662 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1663 Changed chroot wrapper code in spawn() to write the wrapper the python way
1664 instead of the bash way to avoid quote conflicts. Added
1665 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1666 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1667 as it breaks the piping.
1668
1669 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1670 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1671
1672 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1673 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1674 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1675 GLIInstallProfile.
1676
1677 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1679 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1680 into /mnt/gentoo in prepare_chroot()
1681
1682 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1683 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1684 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1685 to start/end sectors
1686
1687 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1688 Add 2>&1 to cmd in spawn()
1689
1690 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1691 Modified GLIUtility.exitsuccess() to work with return value from
1692 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1693 creates wrapper script for commands run inside chroot so multiple commands
1694 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1695 for the generated script from spawn()
1696
1697 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1698 Removed default values for stage tarball URI and portage tree URI from
1699 InstallProfile. These should be set by the FEs. also added services step to
1700 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1701 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1702
1703 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1704 Small fix for setting the default gateway. Also added feature to dialogfe.
1705
1706 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1707 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1708
1709 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1710 Fixed a bunch of true -> True typos. lots of em
1711 only write new resolv.conf if there are dns servers listed.
1712
1713 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1714 Commented out 'display_on_tty8=True' in start_portmap()
1715
1716 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1717 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1718
1719 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1720 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1721 lang parameter to __init__()
1722
1723 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1724 updates to TODO list.
1725
1726 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1727 Initial code for quickpkg GRP support. Fix loop to grab packages from
1728 'emerge -p blah'
1729
1730 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1731 check for dhcp in the network stuff and emerge it if it is.
1732 added quickpkg to TODO list
1733
1734 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1735 Changed the raising of 'warning' exceptions to a simple log of the error
1736 so that the installer can continue.
1737
1738 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1739 Some big changes. First, changed most output to display_on_tty8.
1740 Second, added log lines to all templates. Some smaller fixes such as typos.
1741 Also did some cleanups of old commented lines.
1742
1743 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1744 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1745 Undo change with fix. Escaping fix in GLIStorageDevice.py
1746
1747 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1748 more updates to TODO list. hopefully we'll soon start removing items instead
1749 of adding them.
1750
1751 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1752 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1753
1754 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1755 updated TODO list. (again)
1756
1757 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1758 changed output of portmap start to display_on_tty8.
1759 fixed bootloader for udev and multiple kernels
1760 fixed custom kernel config (again)
1761
1762 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1763 changed default value of CC._enable_ssh to True because this is smart.
1764 added code to allow custom kernel .config. may be unstable and break. sorry.
1765
1766 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1767 partition() now waits until after it checks for partition flags before delete
1768 the partitions :P
1769
1770 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1771 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1772 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1773 blank.
1774
1775 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1776 Various fixes related to the add_users function. Still not yet finished.
1777 Added things to the TODO list. Lets start using that!
1778
1779 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1780 Added code to x86Template to format newly created partitions. Also added
1781 some error checking code. GLIStorageDevice passes 'minor' with data to
1782 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1783 mounting code.
1784
1785 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1786 Took out unnecessary setting of random livecd root password. the cd already
1787 sets it randomly.
1788
1789 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1790 Took out an unneeded step from CC's run()
1791
1792 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1793 Attempt at detecting and adding windows partitions to lilo.
1794
1795 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1796 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1797 partition. fixed misc exit_status => exitstatus typo.
1798
1799 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1800 Added basic code for resizing filesystems with pyparted. Fixed code for
1801 resizing ntfs and ext2/3.
1802
1803 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1804 Fixed partition() in x86Template so that it scans through logicals and deletes
1805 before deleting containing extended partition. Also clears partition table to
1806 be safe before third pass.
1807
1808 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1809 Added mount_network_shares. not able to test it from this computer.
1810 will test when i get back to school.
1811 also added start_portmap to the client_controller as an always-do.
1812 agaffney says this is needed for NFS mounts to work.
1813
1814 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1815 Partial rewrite of partitioning code in x86Template. No longer shells out to
1816 parted to perform actions, now uses all pyparted calls. Code "works" in a
1817 test, but still needs lots of TLC. Also modified tests/install.py to work
1818 with x86Template and GLIClientConfiguration.
1819
1820 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1821 Initial move of partitioning code from ArchTemplate to x86Template.
1822
1823 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1824 Added grp_install and services to InstallProfile. forgot about the set_root_password
1825
1826 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1827 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1828 agaffney. Test Install ran very well (skipping partitioning).
1829
1830 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1831 My mid-day update. rewrote mount_local_partitions for order of mounting.
1832 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1833 partition format. fixed a few _edit_configs. some may still have eluded me.
1834
1835 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1836 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1837 to test it.
1838 Just finished mount_local_partitions in GLIArchitectureTemplate
1839
1840 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1841 Added get_num_sectors() to GLIStorageDevice.
1842
1843 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1844 GLIStorageDevice now tracks partition boundaries in sectors instead of
1845 cylinders.
1846 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1847 from GLIInstallProfile.
1848
1849 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1850 GLIStorageDevice returns "unknown" instead of "" for get_type()
1851
1852 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1853 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1854 actually work. Commented out resizability checking code for speed.
1855
1856 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1857 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1858 in GLIStorageDevice at the suggestion of plors
1859
1860 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1861 Added a function to GLIUtility to pull a value from a make.conf-style config
1862 file. Minor type fix to GLIInstallProfile.py
1863
1864 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1865 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1866 Separated network mounts from partition data structure in GLIInstallProfile
1867
1868 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1869 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1870 can be resized.
1871
1872 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1873 Added some of the final functions to GLIInstallTemplate.
1874 Yes this project is still active despite rare use of the Changelog!
1875
1876 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1877 Added the GLIPartitionTools.py file. This is a temporary insertion of
1878 partitioning tools that will eventually go into their own package.
1879
1880 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1881 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1882 run-time for the program). Added __init__(install_profile,
1883 client_configuration) to GLI.InstallProfile. This sets install_profile and
1884 client_configuration once so as to avoid constantly passing stuff every time
1885 we call a method.
1886
1887 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1888
1889 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1890 config files without messing up all the other stuff in them. This will be
1891 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1892
1893 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1894
1895 Added GLI.InstallTemplate framework. This is not yet functional. However,
1896 it does have a few basic things. I added two private methods. One is
1897 _depends(). This will be used for dependency checking (ie. unpacking a
1898 tarball requires that partitioning has been done). The other is
1899 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1900 instead of being run in the liveCD environment, it runs in the chroot. This
1901 requires a bit of fork() magic, so I isolated the code. Hope to work more
1902 this week to get this class formed...
1903
1904 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1905 Added SAX parsing. Made GLI.InstallProfile a subclass of
1906 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1907 to be lists instead of tuples to allow for easier modification (mutable,
1908 rather than immutable objects). Updated existing pydoc and added more.
1909 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1910 GLI.py a bit. Fixed all accessors to use self references.
1911 Added initial unit test code.
1912
1913 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1914 Added initial changelog. Setting up the basic structure of the CVS repository
1915 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1916 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20