/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1479 - (show annotations) (download)
Thu Jul 20 22:32:53 2006 UTC (8 years ago) by wolf31o2
File size: 79385 byte(s)
Added a few more applications to the list of extra packages to be merged, all from various GRP sets.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.663 2006/07/20 22:32:53 wolf31o2 Exp $
4
5 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
6 src/GLIInstallProfile.py:
7 Added a few more applications to the list of extra packages to be merged,
8 all from various GRP sets.
9
10 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
11 Added launch variable to the end of each try-run with auth, which should
12 cause this to function properly. Of course, more testing is needed.
13
14 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
15 Fix a missed space in the installer script.
16
17 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
18 src/GLIClientController.py:
19 log version-stamp
20
21 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
22 Updated the installer script to allow specifying the front-end to run from
23 the command line. Currently, it only supports dialog and gtk. It still needs
24 some testing, however.
25
26 9 July 2006; Preston Cody <codeman@gentoo.org>
27 src/GLIGenDialog.py:
28 make lilo only show up for x86 if non-networkless
29
30 25 Jun 2006; Preston Cody <codeman@gentoo.org>
31 src/GLIGenDialog.py:
32 adding code to auto-add doscsi if a scsi drive detected.
33 this code is also in the gtkfe already
34
35 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
36 src/GLIPortage.py:
37 pass proper PORTAGE_TMPDIR
38
39 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIUtility.py:
41 fix list_mirrors() to ignore <uri> lines that don't end on the same line
42
43 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
44 Added code to the mta step in AT to parse the install packages list and
45 look for mtas and if it finds it emerge it.
46 Initial attempt at moving extra_packages early in the setup to only show
47 local USE flags relating to those packages.
48 .. abandoned local USE project. no right way to do it.
49
50 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
51 src/GLIUtility.py:
52 minor tweak to regex for parsing mirrors.xml
53
54 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
55 src/templates/x86ArchitectureTemplate.py:
56 make use of strict_start and strict_end in partition recreation
57
58 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
59 src/templates/x86ArchitectureTemplate.py:
60 add strict_start and strict_end parameters to _add_partition()
61 add _find_current_minor_for_part() function to help with resizing
62 fix logical/extended logic in _partition_delete_step()
63 in _partition_resize_step(), delete, recreate at new size, resize, delete
64 call resize2fs with no size argument so it fills entire partition
65 more logging
66 only delete, recreate, resize, delete if growing
67 pass new size to resize2fs in K
68
69 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
70 src/GLIStorageDevice.py:
71 call reorder_minors() from tidy_partitions() instead of
72 set_partitions_from_disk()
73 add code to reorder_minors() to take extended/logical into consideration with
74 non-free partitions
75
76 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
77 added a check of the length of the directory in /usr/src if under 6 characters
78 should fix bug 131809
79
80 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
81 src/GLIArchitectureTemplate.py:
82 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
83 and livecd-kernel
84
85 16 Apr 2006; Preston Cody <codeman@gentoo.org>
86 src/GLIGenDialog.py:
87 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
88
89 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
90 src/GLIInstallProfile.py:
91 change kernel-modules to not be so stupid
92
93 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
94 GLIMD: fix display problem with execute.pyhtml.
95 make tables better.
96
97 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
98 src/GLIInstallProfile.py:
99 fix handling of int/float for minor
100 src/templates/x86ArchitectureTemplate.py:
101 save/restore partition name
102 src/GLIStorageDevice.py:
103 support for partition name
104
105 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
106 touchups to add_profile in GLIMD to link to webgli
107 add a save to GLIMD profile button in webgli's saveprofile
108 gliserv.py:
109 initial attempt at custom networking info per client. hostname support only.
110
111 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
112 src/net/server/html/webgli/partitioning[234].pyhtml:
113 small fixes for new partioning code
114
115 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
116 src/GLIClientController.py:
117 record PID of secondary thread
118
119 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
120 src/GLIGenDialog.py:
121 small fix for new partitioning code
122
123 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
124 src/GLIStorageDevice.py:
125 add get_devnode()
126 fix up detect_devices() to detect cciss/ida arrays
127 src/templates/x86ArchitectureTemplate.py:
128 use get_devnode() instead of figuring out the devnode
129 skip first 3 steps if partition layout hasn't changed
130 wipe disk and create new disklabel before recreating partitions
131 src/GLIArchitectureTemplate.py:
132 use get_devnode() in local mount and fstab stuff
133
134 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
135 src/GLIStorageDevice.py:
136 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
137
138 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
139 src/templates/x86ArchitectureTemplate.py:
140 continue breakup/cleanup of partitioning code
141
142 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
143 src/GLIStorageDevice.py:
144 set disklabel to default for arch when clearing the partition table
145 src/templates/x86ArchitectureTemplate.py:
146 complete rewrite of first and second passes
147
148 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
149 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
150 allow iterating over Device object to get partitions
151
152 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
153 src/GLIStorageDevice.py:
154 allow access to Device object like a dict
155
156 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIStorageDevice.py:
158 allow access to Partition object like a dict
159
160 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
161 src/templates/x86ArchitectureTemplate.py:
162 fail if any filesystems are mounted on the device being partitioned
163
164 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
165 src/GLIStorageDevice.py:
166 reorder minor numbers when loading partitions from disk to match the physical
167 partition order
168
169 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 overhaul for supporting mac disklabels and partitions out of disk order
172 remove free space from inside extended partition when extended is removed
173
174 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
175 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
176 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
177 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
178 Added bash scripts, icons, and desktop entries from the ebuild to make my
179 life easier.
180
181 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/GLIStorageDevice.py:
183 raise an exception if the existing partitions are out of disk order
184 look for minors out of order instead of disk position
185
186 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
187 src/fe/dialog/gli-dialog and src/GLIGenDialog:
188 added networkless mode to gli-dialog.
189
190 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
191 src/templates/x86AT:
192 add windows detection code for grub. untested.
193
194 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
195 src/templates/x86ArchitectureTemplate.py:
196 bootloader and partitioning external commands log to compile_output.log
197 wait for device node to exist before resizing
198 add -v to ntfsresize command
199 src/GLIStorageDevice.py:
200 return start/end with ip structure
201 pad min ntfs size by 50 MB just to be safe
202 src/GLIArchitectureTemplate.py:
203 only install filesystem tools for partitions with a mountpoint
204
205 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
206 add error catching and text to saving profile dialogs
207
208 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
209 src/GLIPortage.py:
210 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
211 src/templates/x86ArchitectureTemplate.py:
212 fix checks for changed partitions so they will actually get deleted
213
214 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
215 src/GLIClientController.py:
216 slightly better error handling for pre-install failures
217
218 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
219 src/templates/x86ArchitectureTemplate.py:
220 proper return code checking for ext2/3 resizing
221
222 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
223 src/GLIClientController.py:
224 accept 'none' as well as 'null' for network type
225 src/GLIArchitectureTemplate.py:
226 ignore extended partitions in mount_local_partitions()
227 src/templates/x86ArchitectureTemplate.py:
228 use get_ordered_partition_list() instead of keys().sort() for new_part_list
229 check to make sure start sector for primary isn't less than end sector for
230 previous extended
231 src/GLIClientController.py:
232 write dns servers to /etc/resolv.conf
233
234 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
235 src/GLIPortage.py:
236 copy_pkg_to_chroot() uses compile_output.log for command output
237
238 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
239 only keep a 1000 line 'scrollback' buffer for the compile output and log file
240
241 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
242 src/GLIPortage.py:
243 add code make GLIPortage.py capable of being run stand-along for dynamic
244 stage3 generation and copying packages in a GRP-ish way
245 grp code fixups
246
247 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
248 src/GLIPortage.py:
249 ignore blank packages passed to get_deps() and emerge()
250
251 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
252 src/GLIUtility.py:
253 add get_chosts() function
254
255 *GLI-0.3 (12 Feb 2006)
256
257 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
258 src/templates/x86ArchitectureTemplate.py:
259 pull old start/end sector values from somewhere that actually has them
260 add logic for extended partition to code that makes sure new end sector
261 doesn't overlap start sector of next partitions
262 don't freak out if partition can't be deleted
263
264 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
265 src/GLIPortage.py:
266 run env-update at the end of copy_pkg_to_chroot()
267
268 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
269 src/templates/x86ArchitectureTemplate.py:
270 I'm a complete fscking dumbass. I recorded the end sector for partitions that
271 weren't being touched, but I never used it when recreating them...the end was
272 calculated from the size in MB instead :/
273
274 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
275 src/GLIArchitectureTemplate.py:
276 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
277 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
278 src/GLIPortage.py:
279 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
280 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
281 'resized' flag
282
283 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
284 src/GLIPortage.py:
285 short circuit and check vdb directly if package begins with '='
286
287 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
288 added more packages to extra_packages list in IP
289
290 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
291 src/templates/x86ArchitectureTemplate.py:
292 10 tries to create filesystem instead of 3
293 src/GLIPortage, src/GLIArchitectureTemplate.py:
294 ignore_missing flag for copy_pkg_to_chroot()
295
296 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
297 src/GLIPortage.py:
298 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
299
300 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
301 src/net/server/gliserv.py:
302 fix handling of 404 for real files
303 src/net/server/GLIServerProfile.py:
304 look for 'hostname' in attributes instead of 'name'
305
306 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
307 src/SimpleXMLParser.py:
308 initial support for 'include' in XML files
309 src/GLIStorageDevice.py:
310 initial support for %
311 src/GLIClientController.py:
312 add debugging statements to pre-install steps
313
314 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
315 webgli/configfiles:
316 check for key in etc_files['rc.conf'] to fix key error
317 webgli/timezone: small fix.
318 webgli/extrapackages: list-type fix
319 webgli/services: same
320 glimd: add/edit_client updates.
321
322 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
323 added configure.pyhtml to glimd. minor changes
324 to top and add_client. fixed up showargs.
325 added execute.pyhtml
326 changed register clients line in gliserv for name->hostname.
327 updated TODO.
328
329 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
330 src/net/server/*:
331 added add/del/edit client/profile.pythml for glimd.
332 updated templates, showclients, and gliserv.
333
334 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
335 src/net/server/*:
336 stupid threading module...
337
338 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
339 AT: rc.conf -> conf.d/clock
340
341 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
342 src/GLIPortage.py:
343 show 'Calculating dependencies for ...' in subprogress bar at beginning of
344 emerge()
345 src/GLIArchitectureTemplate.py:
346 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
347 in the chroot
348 remove _quickpkg_deps() and _portage_best_{visible,version}()
349 src/GLIUtility.py:
350 fail immediately in validate_uri() if provided URI can't be parsed
351 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
352 debug code in spawn()
353 use lower-level os.read() instead of file.read() because python sucks
354 src/templates/x86ArchitectureTemplate.py:
355 basic subprogress reporting for partitioning
356 total_steps was 1 too high
357
358 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
359 src/GLIUtility.py:
360 move parse_vdb_contents() to GLIPortage
361 src/GLIPortage.py:
362 remove all symlink fixups
363 ignore 'dir' entries in CONTENTS
364 call tar with -p
365
366 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
367 AT: bootsplash is now gensplash
368 gliserv: add advanced_mode to shared_info
369 webgli: Added advanced mode. mostly just disables a few screens.
370
371 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
372 src/GLIPortage.py:
373 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
374 added emerge()
375 update sub-progress after each package is emerged
376 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
377 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
378 remove link if it exists before moving content into place
379 src/GLIArchitectureTemplate.py:
380 install_packages() now calls emerge() in GLIPortage
381 change all calls to self._emerge() to self._portage.emerge()
382 comment out all emerge status checking...using exceptions now
383 call copy_pkg_to_chroot() directly for livecd-kernel
384
385 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
386 src/GLIArchitectureTemplate.py:
387 remove add_pkg_to_world() and copy_pkg_to_chroot()
388 copy installer.log to installer.log.failed on install failure
389 src/GLIUtility.py:
390 added get_keymaps()
391 spawn() takes any False argument for chroot instead of just None
392 src/GLIPortage.py:
393 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
394 change copy_pkg_to_chroot() to work properly with use_root=False
395 figure PORTAGE_TMPDIR properly
396
397 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
398 src/net/server/html/*:
399 converted showclients, load/saveprofile
400
401 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
402 src/GLIPortage.py:
403 exclude packages already in chroot vdb from binary deplist
404 chroot to use best_version for chroot's vdb
405 src/runtimedeps.py:
406 accept ROOT via commandline instead of env
407
408 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
409 src/runtimedeps.py:
410 remove passing of ROOT
411 src/GLIPortage.py:
412 modify get_deps() to get deptree for each package and merge into final list
413 remove depgraph class
414 add debugging code to get_deps()
415 src/GLIArchitectureTemplate.py:
416 combine code for GRP/compile in install_packages() into one block
417 debugging code in install_packages()
418
419 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
420 src/runtimedeps.py:
421 initial commit
422 src/GLIPortage.py:
423 use separate script for GRP deps
424 remove calls to portage module
425
426 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
427 src/GLIPortage.py:
428 initial commit
429 move some of portage function from GLIAT
430 flipped around a few function args
431 src/GLIArchitectureTemplate.py:
432 revamp install_packages() for new GLIPortage
433
434 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
435 src/GLIArchitectureTemplate.py:
436 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
437
438 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
439 src/net/server/gliserv.py:
440 wrap generated code in a class to isolate it a bit better
441 302 redirects work
442 don't use cgi.escape() for <% %>
443 src/net/server/html/webgli/*:
444 load/save profile
445 src/GLIUtility.py:
446 change /sbin/lspci to just lspci
447
448 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
449 src/GLIClientController.py:
450 change ordering of statements in CC run() while loop to not go past the end
451 of the array
452 src/GLIArchitectureTemplate.py:
453 removed redundant bind mounts
454
455 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
456 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
457 added a diagram by blackace from last night.
458 added the glossary in RTF format.
459
460 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
461 x86AT: separated out emerge/configure from running of bootloader
462 added MBR drive support to lilo.
463 these changes will likely not work.
464 AT: added setup_and_run_bootloader step.
465
466 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
467 src/net/server/gliserv.py:
468 call generated code in a function
469 src/net/server/html/webgli/*:
470 include top/bottom
471 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
472 src/GLIClientCongifuration.py:
473 install mode magic
474
475 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
476 src/GLIClientController.py:
477 use GLIException when there's an import problem
478 added debug code to show install_steps
479 src/templates/amd64ArchitectureTemplate.py:
480 add . to import path
481 proper path this time: ../../templates
482 src/GLIArchitectureTemplate.py:
483 add _portage_best_version() function
484
485 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
486 added initial glossary and gimli diagram to the docs directory.
487 modify gli-dialog to allow editing of the install_profile after loading XML.
488
489 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
490 src/net/server/html/webgli/:
491 converted globaluse, localuse, networkmounts, portagetree, and stageselection
492 moved saveclientconfig stuff into clientconfig
493 moved saveconfigfiles into config files
494 converted etc_portage and makedotconf
495 converted bootloader and kernel
496 convert daemons, extrapackages, networking, review, services, timezone, users
497 src/net/server/gliserv.py:
498 proper 404 handling for .pyhtml extension
499 HTML escape <% %> stuff
500 work around python's sucky regexes
501 src/GLIInstallProfile.py:
502 allow set_{rsync,ftp,http}_proxy() to accept empty values
503
504 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
505 src/net/server/gliserv.py:
506 initial commit of Legolas templating engine
507 302 redirects
508 src/net/server/html/index.html, src/net/server/webgli_template.html:
509 minor changes for new code
510 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
511 initial commit of the conversion from the monolithic WebGLIHandler.py to the
512 one file per path Legolas goodness
513 partitioning[2-4] done
514
515 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
516 webgli: dhcp options in CC and post-install.
517 updated comparison chart.
518 webgli: etc/portage/* and distcc support added. not too-well tested.
519
520 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
521 webgli_template.html: valign=top on left side.
522 webgli: fix bootloader boot_device. now working.
523 webgli: CC proxy done. post-install proxy in progress.
524
525 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
526 src/net/server/webgli_template.html:
527 increase padding for content cell to 7px and add colspan=2
528
529 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
530 webgli: added graphic bar on top
531 webgli: added hover effects on the links on the left
532 webgli: re-rendered header_bg.png to stretch without artifacts
533
534 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
535 webgli: make.conf disabling fixes for dynamic_stage3
536 fixed portage snapshot browse popup
537 all changes tested.
538 webgli: add debug mode to CC screen. the screen still needs lots of work.
539
540 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
541 added debug mode question to gli-dialog
542 added CC proxies to CC networking for gli-dialog
543 webgli: fixed skip CC networking if connection active
544 webgli: portage snapshot defaults to CD
545 webgli: bootloader mbr drive selection
546 webgli: USE flags unselectable if dynamic_stage3
547 webgli: manual extra packages and save button.
548
549 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
550 src/GLIUtility.py:
551 change ping count to 2
552 docs/comparison.html
553 initial commit
554
555 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
556 src/templates/x86ArchitectureTemplate.py:
557 fix map() issue with grub code
558 replace kernel_names and initrd_names loops with one-liners
559
560 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
561 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
562 initial gli-dialog support for recommended partitioning layout and clear.
563 failure cleanup now an option for gli-dialog.
564 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
565 added comparison list and updated TODO!
566
567 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
568 src/GLIArchitectureTemplate.py:
569 fix to stage1() debug code
570 fix to stage2() debug code
571
572 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
573 some more bootloader code fixes. forgot boot_device != mbr_device.
574
575 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
576 src/GLIStorageDevice.py:
577 fix to unallocated space merging when last one is after part 4
578
579 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
580 src/GLIArchitectureTemplate.py:
581 small fix to debugging code in copy_pkg_to_chroot()
582
583 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
584 more bugfixes with bootloader code
585 gli-dialog side appears to work
586
587 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
588 initial adding of boot_device to backend.
589 initial boot_device support added to gli-dialog.
590 some fixes of my poor coding
591
592 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
593 converted gli-dialog to use the install_package_list.
594 gtkfe has already been converted by AllanonJL
595 new way working in gli-dialog now and added to webgli.
596 added set/get_boot_device() to IP
597
598 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
599 get_install_package_list added to InstallProfile. This can be used by the FEs
600
601 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
602 src/templates/x86ArchitectureTemplate.py:
603 call ls with '-1 --color=no'
604
605 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
606 added warning (#9) to GRP ppl about stage3 tarballs
607
608 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
609 src/GLIArchitectureTemplate.py:
610 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
611 confused
612
613 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
614 removed protocols from rc.conf screens
615 finished initial rc.conf and make.conf in webgli
616
617 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
618 src/net/server/gliserv.py:
619 add -h option to usage()
620 show time and request URI in debug mode
621 show client IP in debug mode
622 just use IP instead of trying to do a reverse lookup
623
624 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
625 src/net/server/gliserv.py:
626 'classier' 401 message
627 proper commandline parsing
628 help via -h
629 user/pass can be specificed via commandline option
630
631 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
632 src/net/server/gliserv.py:
633 basic HTTP auth
634
635 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
636 src/net/server/gliserv.py:
637 dynamic module reloading (yipee!)
638 send 'Last-Modified' header for real files
639 respond to HEAD with just headers
640 src/net/server/handlers/WebGLIHandler.py:
641 icons for drives
642
643 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
644 src/net/server/handlers/WebGLIHandler.py:
645 initial 'pretty' partition table display support
646 clicking partition in 'pretty' display works instead of radio buttons
647 radio buttons and pretty display work together
648 META redirect instead of javascript
649 pretty display stretches across entire screen
650 'Recommended layout' and 'Clear drive' functions
651 properly catch exceptions from do_recommended()
652 src/GLIArchitectureTemplate.py:
653 replace preinst, copy, postinst, rm steps with qmerge
654 whoops...that shouldn't have been commented out
655 create image_dir with -p in copy_pkg_to_chroot()
656 more generic of symlink crappiness
657 new copy_pkg_to_chroot() actually works now
658
659 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
660 src/GLIStorageDevice.py:
661 initial generic disk support
662 fixes for add_partition() code
663 src/net/server/handlers/WebGLIHandler.py:
664 added support for creating generic disks
665 add new partition working
666 save and delete partitions
667
668 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
669 webgli: Partitioning making progress.
670
671 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
672 src/GLIArchitectureTemplate.py:
673 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
674 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
675 dir) and works around /etc/gconf symlink problem
676
677 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
678 webgli: lots of updates. preliminary partitioning. extra packages works.
679
680 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
681 src/net/server/gliserv.py:
682 httpd now supports HTTPS and falls back to HTTP if not available
683 make fallback actually work
684 src/net/server/SecureXMLRPCServer.py:
685 SecureSocketServer is now threaded
686
687 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
688 src/net/client/gliclient.py:
689 try to use HTTPS for XMLRPC first and fallback to HTTP
690 pretend mode
691 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
692 HTTPS XMLRPC goodness from samyron
693 pass name of certificate
694
695 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
696 wegli: daemons and services screens done.
697
698 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
699 webgli: networking and users screens
700 added return_redirect to handler.py
701 loading and saving install/client profiles works for webgli now
702 Review also done
703
704 *GLI-0.2 (27 Oct 2005)
705
706 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
707 src/templates/x86ArchitectureTemplate.py:
708 properly check for bootloader emerge exist status with exitsuccess()
709 log output of grub install command
710 add --batch --no-floppy to grub command
711 grubinstallstring only gets logged if debug is on
712 src/GLIUtility.py:
713 update progress bar to 100% when process finishes
714
715 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
716 src/GLIClientController.py:
717 added debugging code for the interaction between the 2 threads via Event()
718 src/GLIUtility.py:
719 doubled the buffer size in spawn()
720 bump buffer size up to 16384
721 only report progress in 5% increments
722 src/GLIArchitectureTemplate.py:
723 kernelpkgs.txt support code
724 above disabled because it sucks
725 added add_pkg_to_world()
726
727 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
728 src/GLIArchitectureTemplate.py:
729 use tar | tar to copy files in copy_pkg_to_chroot()
730 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
731
732 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
733 DEBUGGING ADDED TO AT. verbose field added to CConfig.
734
735 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 src/net/server/gliserv.py:
737 / maps to index.html
738 look for actual files in html/
739 src/net/html:
740 new template
741 src/GLIUtility.py:
742 added parse_vdb_contents()
743 src/GLIArchitectureTemplate.py:
744 added copy_pkg_to_chroot()
745 added debug code to dynamic-stage3
746 switch dynamic-stage3 to new method
747 lots of bug fixes from adding debug code
748
749 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
750 webgli initial bootloader support + changed make.conf.
751 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
752
753 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
754 src/GLIUtility.py:
755 horrible tangled mess of code that is tarball unpacking subprogress display
756 add unpack progress to portage snapshot
757 use read() instead of readlines() in spawn()
758 only update progress bar for whole percents
759
760 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
761 src/templates/x86ArchitectureTemplate.py:
762 change call to 'grub' to use GLIUtility.exitsuccess()
763 add definition of 'build_mode' in _configure_lilo()
764 src/misc/updategtkfe, src/misc/updateglid:
765 fix so subshell is called in root shell
766
767 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
768 src/net/server/handlers/WebGLIHandler.py:
769 stage screen launches URI browser in sized window with various properties set
770
771 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
772 src/misc/updategtkfe:
773 updated to actually work
774 remove previous snapshot and extracted dir before downloading
775 src/misc/updateglid:
776 updated to actually work
777 src/templates/x86ArchitectureTemplate.py:
778 fixed bug where grub code was looking for 'root+root+file_name2'
779
780 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/net/server/handlers/WebGLIHandler.py:
782 URI browser
783 added mirror selection
784 src/GLIUtility.py:
785 ls via ssh strips off ending *
786
787 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
788 more updates to webgli. stage selection.
789
790 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
791 updated webgli with preliminary Network Mounts support.
792
793 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
794 GenDialog: string formatting and yes/no label fixes.
795 added WebGLI template for gliserv.py
796 added WebGLIHandler as well as a definition for it in gliserv.py
797 updates to the webgli files even though they won't be there for long.
798 Utility: remove exception for non-existant grppkgs.txt until the new livecd
799 goes public.
800
801 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
802 src/net/server/gliserv.py:
803 override dict to not be so anal
804 main server now loads separate module to handle requests
805 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
806 split out profile URLs into separate handler function
807 move handlers into subdirectory
808 add Welcome and Clients handlers
809
810 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
811 src/GLIUtility.py:
812 raise exception if password prompt received twice
813
814 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
815 src/GLIUtility.py:
816 removed rot13ify()
817
818 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
819 src/net/server/gliserv.py:
820 allow for param to be passed multiple times in GET
821 no XMLRPC functions return None
822 modify POST request parsing to only create a list if needed
823 fix GET request parsing so the list creation for multiple values works
824 src/net/client/gliclient.py:
825 various typo and type mismatch fixes
826 exit after exception
827
828 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
829 src/net/client/gliclient.py:
830 initial commit
831 pass MAC to XMLRPC functions
832 src/net/server/GLIServerProfile.py:
833 rename GLIClientsProfiles to GLIServerProfile
834
835 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 src/net/server/gliserv.py:
837 now handles POST requests
838 move majority of request handling code to common_handler() to reduce code
839 duplication
840 profile loading
841 client reg via XMLRPC goes into SharedInfo()
842 /showclients redesign
843 template fixes
844 allow handler functions to add/change headers
845 save profile
846
847 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
848 src/net/server/GLIClientsProfiles.py:
849 initial commit
850 src/net/server/template.html:
851 initial commit
852 src/net/server/gliserv.py:
853 add template mojo
854
855 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
856 src/net/server/gliserv.py:
857 XMLRPC mojo
858
859 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
860 src/GLIArchitectureTemplate.py:
861 add code in _edit_config() to comment line where variable is defined
862 previously
863 insert new line under previous definition of variable if it exists
864 small _edit_config() cleanup
865 src/GLIStorageDevice.py:
866 add clear_partitions() function
867 new sizes for recommended partition layout
868 automatically calculate swap size for recommended layout
869
870 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
871 src/templates/x86ArchitectureTemplate.py:
872 fat16 mojo
873
874 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
875 src/GLIStorageDevice.py:
876 prevent do_recommended() from being run twice
877 rewrite do_recommended() to be more robust
878 src/GLIArchitectureTemplate.py:
879 rework _edit_config() to not write duplicate entries
880
881 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
882 src/GLIStorageDevice.py:
883 added do_recommended() function to automatically created 256M/1G/* layout
884
885 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
886 src/gli-dialog.py: added set_distcc to the list
887 GenDialog: added set_distcc. untested.
888 IP: added install_distcc flag.
889 AT: added install_distcc function based on the flag. runs after build_kernel
890 changed AT spawn command for distcc for nodeps.
891
892 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
893 src/GLIUtility.py:
894 add rot13ify() function
895
896 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
897 src/GenDialog.py:
898 added a sentence of text. unchecking support added.
899
900 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
901 src/GLIUtility.py:
902 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
903 src/GenDialog.py:
904 still working on extra_packages. transformed the list to new format.
905 added GRP indication to list. untested.
906 TODO lists updated.
907 src/fe/dialog/gli-dialog.py:
908 spelling mistook.
909
910 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
911 src/GLIUtility.py:
912 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
913
914 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
915 src/GLIUtility.py:
916 add get_directory_listing_from_uri()
917 add http support to above
918 add ftp support to above
919 add scp support to above
920 src/GLIArchitectureTemplate.py:
921 "0" instead of 0 for key of single-element dict passed to _edit_config()
922
923 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
924 value_only -> only_value
925
926 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
927 gutted out all of etc_portage structure since it is now all handled by
928 etc_files
929
930 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
931 src/GLIArchitectureTemplate.py:
932 install_packages() sends progress update notifications
933 src/templates/x86ArchitectureTemplate.py:
934 increase sleep to 5s between format tries
935 src/GLIClientController.py:
936 pass 'self' to AT instead of 'self._pretend'
937
938 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
939 logger -> logger.log in x86AT
940
941 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
942 added set_etc_portage to IP. debugging gli-d's support for it.
943
944 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
945 src/templates/x86ArchitectureTemplate.py:
946 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
947
948 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
949 src/GLIArchitectureTemplate.py:
950 add _portage_best_version() function and rework install_packages() to allow
951 for future X of Y tracking
952 Use best_visible instead of best_version
953 tracked down and fixed missing = causing empty install extra packages
954 use = when emerging also
955 quickpkg hokey pokey
956 run _get_packages_to_emerge() again with -pk
957
958 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
959 src/ArchTemplate:
960 removed install_xorg_x11, and put the xorg.conf copying at
961 the end of install_packages.
962 added updateglid to /src/misc
963 updated all core files with new GPL notice and copyright statement.
964
965 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
966 src/GLIUtility.py:
967 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
968 a snapshot in /mnt/cdrom/snapshots/
969 get_snapshot_from_cd() adds file:// at the beginning
970 change calls to extra package special case functions to 'self.blah'
971
972 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
973 src/ArchTemplate: changed "voodoo".
974 changed order of portage sync methods. made a fallback to webrsync if
975 normal emerge sync fails.
976 removed get_sources_from_cd because it is obsolete.
977 add special cases to install_packages. remove fatal exception on package
978 install failure b/c the box will still be bootable.
979 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
980 handled in the FEs.
981 src/GenDialog: added a bunch of code for dealing with x11-based packages.
982 awaiting testing.
983
984 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
985 src/GLIStorageDevice.py:
986 global try/except block around fs resizable detection code
987 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
988 install-failed cleanup function
989
990 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
991 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
992
993 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
994 GLIGenDialog:
995 add drive choices for loaded configs.
996 force snapshot for dynamic_stage3
997 init the snapshoturi input to the cd snapshot if not already selected.
998 if dynamic_stage3, skip the make.conf step.
999 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1000 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1001
1002 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1003 src/GLIArchitectureTemplate.py:
1004 manually call MAKEDEV in stage3-dynamic code
1005 copy /etc/inittab.old to /etc/inittab in chroot
1006 src/GLIUtility.py:
1007 add beginning of validate_uri() function
1008 add file:/// support to validate_uri()
1009 single quotes when setting livecd password
1010
1011 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1012 src/GLIGenDialog.py:
1013 change getmountpoint() to get_mountpoint()
1014 src/misc/updategtkfe:
1015 committed script to automatically download latest snapshot and run gtkfe
1016 src/templates/x86ArchitectureTemplate.py:
1017 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1018 src/GLIArchitectureTemplate.py:
1019 give tmp_minor an initial value in mount_local_partitions so that the value
1020 remain from the previous drive
1021
1022 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1023 src/templates/x86ArchitectureTemplate.py:
1024 Fix _configure_lilo() for IP using GLISD stuff
1025 src/GLIArchitectureTemplate.py:
1026 install_cron_daemon() treats "none" specially
1027
1028 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1029 old patch from Steven Mertens to resolve bug #96642
1030 numerous asthetic changes to GenDialog, no real functionality changes though.
1031 strings renamed for global use if necessary.
1032 fix all three parts of bug 102291
1033 disable set_etc_portage until fully-written.
1034
1035 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1036 src/GLIClientController.py:
1037 lower-case http/ftp proxy envvars
1038
1039 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1040 src/GLIClientController.py:
1041 log end of pre_install steps to aid in debugging
1042 src/templates/x86ArchitectureTemplate.py:
1043 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1044
1045 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1046 src/GLIArchitectureTemplate.py:
1047 check to make sure that the device node we're wait for to exist isn't of
1048 type 'free'
1049
1050 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1051 src/GLIGenDialog.py:
1052 convert install_packages to list in set_extra_packages()
1053 check return code of checklist() call in "Manual" section
1054 *actually* fix the first problem
1055
1056 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1057 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1058 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1059
1060 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1061 src/GLIArchitectureTemplate.py:
1062 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1063
1064 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1065 Add CDATA support to SimpleXMLParser and add utility functions for it.
1066
1067 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1068 src/GLIArchitectureTemplate.py:
1069 Fix case where vixie-cron is specified as a full package atom, as we still
1070 don't want to run 'crontab /etc/crontab' for it.
1071
1072 *GLI-0.1 (3 Aug 2005)
1073
1074 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1075 add scp to list of is_uri() so GenDialog doesn't complain.
1076 fixed livecd-kernel bug in bootloader code.
1077 fixed gendialog for dynamic_stage3 instead of "networkless"
1078 change bootloader to allow for both initrd and initramfs.
1079 fix IP for dynamic_stage3.
1080 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1081
1082 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1083 Added full scp:// URI support to get_uri() in GLIUtility
1084 Remove "networkless" from dynamic stage3 if locic.
1085 Remove print statement from scp:// code.
1086 Change scp code to check for "assword: " instead of "Password:"
1087 Fix post-install network code to create net.eth1+ symlink correctly
1088 Check to make sure pkg can be split on / and some debugging code
1089 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1090 SimpleXMLParser handles True/False/None correctly now
1091 Comment out above fix
1092 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1093
1094 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1095 Removed a FIXME in the GLIClientConfiguration that is no
1096 longer needed.
1097
1098 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1099 Default to x86 in ClientConfig
1100 Typo in build-a-stage3 code.
1101 Remove MAKEDEV call in build-a-stage3 postscript.
1102
1103 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1104 Rewrote init of IP for gli-d. Other GenDialog updates.
1105 allow network_type to be None in CConfig.
1106
1107 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1108 Add _dynamic_stage3 option to IP.
1109 Add check for that option to dynamic stage3 code in ArchTemplate.
1110 Fix code to determine default route in get_eth_info() in GLIUtility.
1111 Fix serialization of dns-servers in ClientConfig.
1112
1113 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1114 changed default values of cron/logger in IP.
1115 moved GenDialog IP init out to the individual files. gli-dialog's version
1116 will change quite a bit.
1117
1118 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1119 added ppcArchTemplate. blank now. working on yaboot.
1120 modified ArchTemplate for amd64 and ppc custom kernels.
1121 skeleton implementation of _configure_yaboot.
1122 small fixes to other templates.
1123
1124 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1125 GenDialog updates. changed comment in IP.
1126
1127 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1128 src/GLIInstallProfile.py:
1129 Fix codeman's screwup of changing the service seperator to ',' in the parser
1130 without changing it in the serialization code! Also document this in a
1131 comment so you find it easier. Everybody needs to make sure they update
1132 their install profiles!
1133
1134 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1135 src/GLIArchitectureTemplate.py:
1136 Fix casting of list to string and concat of None with string, as well as
1137 commented prototype of checking that mounting actually worked (found a case
1138 where mount can return success, but the mount won't be done).
1139
1140 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1141 src/templates/x86ArchitectureTemplate.py:
1142 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1143 checking for the device, and sleeping 1 second each time.
1144
1145 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1146 src/templates/x86ArchitectureTemplate.py:
1147 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1148 bootloader works again. Also rename _install_{grub,lilo} to
1149 _configure_{grub,lilo} since they don't install the loaders anymore
1150 themselves.
1151
1152 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1153 fix global USE flags to not include the arch types at the end.
1154 updates to GenDialog and gli-d.
1155
1156 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1157 fixing bootloader code for no initrd and initrd->initramfs naming change.
1158
1159 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1160 Proper comments and parameters to GLIException in install_mta()
1161 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1162 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1163 list_tarball_from_mirror() to eliminate blank last item.
1164
1165 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1166 Added stage3 generation code.
1167
1168 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1169 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1170 Mild changes to GenDialog.
1171
1172 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1173 Remove separate install step configure_rc_conf() since it's handled by
1174 update_config_files()
1175 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1176 function is called twice on the same file.
1177
1178 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1179 Missing \ in sed in _get_packages_to_emerge()
1180 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1181 Check in _quickpkg_deps() to ignore blank package names returned from
1182 _get_packages_to_emerge()
1183
1184 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1185 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1186 in the dialog.py gauge code.
1187
1188 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1189 Add code to update_config_files() to go through etc_files and update stuff.
1190 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1191 Only use float() in partition xml parsing code if type == "free"
1192
1193 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1194 finished almost all internationalization of GenDialog.
1195 attempt at fixing rc.conf function. moved 3 generate functions out of
1196 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1197 added dialog.py to the fe/dialog directory so it actually gets used.
1198
1199 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1200 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1201
1202 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1203 fix extra entry in list_mirrors()
1204 beginning internationalization runthrough.
1205
1206 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1207 added dialog.py to /src temporarily until it gets accepted upstream.
1208 fix for unused value in form in dialog.py and changed heights.
1209 fix GenDialog forms.
1210
1211 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 Changed hostname/domainname for new baselayout.
1213 Changed _add_to_runlevel errors to logs.
1214 Updated TODO list to show status of GenDialog
1215 More updates to GenDialog including two checklists that probably won't work.
1216 update IP to use comma-separated list instead of space separated for services.
1217
1218 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1219 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1220 GenDialog as it gets closer to completion.
1221
1222 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1223 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1224 instead of int() in add_partition_device_partition() for minor (closes 96804)
1225
1226 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1227 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1228 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1229 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1230
1231 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1232 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1233 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1234 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1235 Fix undefined variable 'output' issue in spawn().
1236
1237 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1238 More updates to GenDialog and gli-d.
1239
1240 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1241 Modify list_mirrors() to return a list of mirror URL/name pairs.
1242
1243 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1244 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1245 get subarch.
1246
1247 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1248 Backend partitioning will create disklabel is none exists. Installprofile
1249 defaults to "" now instead of "msdos" for disklabel type. Fix for
1250 mount_local_partitions() to remember device along with minor in the
1251 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1252 add else block to log unsupported netmount types to mount_network_shares()
1253
1254 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1255 src/GLIArchitectureTemplate.py:
1256 Refactor kernel_compile common stuff, fix 2.4 build process.
1257 src/fe/cli/clife.py:
1258 Logging system.
1259 src/GLIUtility.py, src/GLIStorageDevice.py:
1260 Add comments about re-writes needed for boxes without sysfs.
1261
1262 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1263 src/GLIArchitectureTemplate.py:
1264 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1265 'make dep' call for custom compile. build_mode support for prepare-only and
1266 none types completed. custom compile function chains shell functions in
1267 spawned script, to allow for catching all errors.
1268
1269 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1270 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1271 and GenDialog. other gendialog updates as well. kernel updates untested.
1272
1273 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1274 src/GLIInstallProfile.py:
1275 Change structure of etc-portage stuff. The serialization was broken before my
1276 last commit, and I am the only person that's ever used it. The new schema is
1277 as follows:
1278 <etc-portage>
1279 <file name="package.mask"/>
1280 <file name="package.unmask">
1281 <entry atom="sys-kernel/openmosix-sources"/>
1282 </file>
1283 <file name="package.use">
1284 <entry atom="sys-libs/db">
1285 -java
1286 </entry>
1287 <entry atom="dev-libs/cyrus-sasl">
1288 -ldap
1289 </entry>
1290 </file>
1291 </etc-portage>
1292
1293
1294 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1295 src/GLIInstallProfile.py:
1296 Add new entry for gli-profile/kernel-build-method item. Add missing
1297 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1298 keys in the same order.
1299
1300 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1301 src/GLIArchitectureTemplate.py:
1302 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1303 was repeatedly appended to make.conf.
1304
1305 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1306 src/GLIArchitectureTemplate.py:
1307 Put some Linux-2.6 specific code under a if statement. Store list of
1308 successfully mounted swap device for using swapoff. Add proper error checking
1309 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1310 'file'. Clean up some redundant code (thanks to pychecker).'
1311
1312 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1313 Fix typos: get_extended() instead of get_extended_partition(). Added
1314 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1315 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1316
1317 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1318 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1319 in add_network_interface.
1320
1321 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1322 src/GLIArchitectureTemplate.py:
1323 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1324 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1325 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1326 prepare_chroot.
1327
1328 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1329 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1330 +src/fe/installer-gtk:
1331 Add new automated CLI frontend. Add scripts that are the intended means to
1332 use each frontend.
1333
1334 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1335 src/GLIClientController.py:
1336 Add null type to network config, for cases where the interface is already up
1337 and should not be touched (netboot for example).
1338
1339 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1340 src/GLIArchitectureTemplate.py:
1341 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1342 string!. Try to use binary packages if available by default.
1343
1344 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1345 src/GLIArchitectureTemplate.py:
1346 More error checking for _add_to_runlevel, to ensure that the init script
1347 actually exists before we try to add it. set_services phase must take place
1348 after the package installation, otherwise the init scripts might not exist.
1349 Find the correct init script for the cron and logging daemons, and add that
1350 instead of the package atom.
1351
1352 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1353 src/GLIArchitectureTemplate.py:
1354 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1355 usage of 'file' to 'contents' for the variable name, as it shadows
1356 __builtin__.file.
1357
1358 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1359 src/GLIArchitectureTemplate.py:
1360 Add MTA install code, and include MTA install phase. Ensure
1361 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1362 for 'none' kernel config for build_kernel phase. Put kernel_script in
1363 /var/tmp instead of /root for build_kernel phase.
1364
1365 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1366 Rename mta variables to match syslog/cron variables.
1367
1368 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1369 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1370 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1371 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1372 src/templates/.cvsignore, src/tests/.cvsignore:
1373 Refactor partition formatting again to include error checking. Allow 'none'
1374 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1375
1376 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1377 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1378 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1379 only have a single spawn call.
1380
1381 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1382 refixed samyron's fix of set_architecture_template.
1383
1384 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1385 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1386 be executable.
1387
1388 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1389 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1390 error checking when you call set_architecture_template.
1391
1392 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1393 moved the mkfsopts input to the partition options menu instead of the during
1394 the creation process. updated GenDialog to say it supports reiserfs v3.
1395
1396 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1397 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1398 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1399 Add support for other partition types to dialogfe.
1400 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1401 avoid integer overflows and wraparounds.
1402
1403 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1404 Removed start/end from XML output and added mkfsopts to partitioning info.
1405 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1406 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1407 in GLIClientConfiguration. Change from .1 and .9 to constants for
1408 partitioning. Fix free space overwriting bug. Remove a few unused functions
1409 from rewrite. Fix call to get_partition_at()
1410
1411 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1412 Updates to GenDialog and dialogfe.
1413
1414 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1415 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1416
1417 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1418 more GenDialog updates to partitioning.
1419
1420 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1421 Indenting issue in GLISD/get_ordered_partition_list.
1422 updates to GenDialog partitioning and added default UTC for timezone in IP.
1423
1424 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1425 Added GLISD.get_model()
1426
1427 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1428 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1429 More updates to GenDialog :)
1430
1431 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1432 Added get_interface_realname() function.
1433
1434 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1435 Added auto-save of CConfig and copying to new /root after install.
1436 yet even more GenDialog updates.
1437
1438 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1439 removed print statement from GLISD. more updates to GenDialog.
1440
1441 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1442 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1443 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1444 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1445 places in GLIClientConfiguration.
1446
1447 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1448 Fix mount_local_partitions(), configure_fstab(), and
1449 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1450 A few more fixes for templates/x86Archtemplate
1451
1452 27 May 2005; Preston Cody <codeman@gentoo.org> :
1453 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1454 a work in progress.
1455
1456 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1457 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1458 directly. GLISD can now handle data imported from XML.
1459
1460 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1461 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1462 handle blank (no disklabel) disks.
1463
1464 20 May 2005; Preston Cody <codeman@gentoo.org> :
1465 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1466 up, documented, and separated out serialization and grouped all sections.
1467
1468 19 May 2005; Preston Cody <codeman@gentoo.org> :
1469 Reorganization of ClientConfiguration and gutting of unused functions.
1470 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1471
1472 18 May 2005; Preston Cody <codeman@gentoo.org> :
1473 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1474
1475 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1476 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1477 partitioning. CC serializes install profile to disk and prepare_chroot()
1478 copies it into /mnt/gentoo/root
1479
1480 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1481 Moved URI parsing into new function parse_uri()
1482
1483 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1484 Added XMLParser module.
1485
1486 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1487 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1488 Minor fix to is_uri() regex to allow hyphens in hostname.
1489
1490 12 May 2005; Preston Cody <codeman@gentoo.org> :
1491 Updated finishing_cleanup for new unmounting method from agaffney.
1492
1493 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 Fix GLILogger to use correct time format string. Fix _edit_config() to
1495 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1496 unicode support to is_realstring().
1497
1498 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1499 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1500 return value instead of non-zero. Add code to output a traceback to the
1501 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1502 instead of --nocolor.
1503
1504 10 May 2005; Preston Cody <codeman@gentoo.org> :
1505 Added GLIGenDialog.py to make a generic class for the dialog functions that
1506 can be used by both dialogfe and the netfe/be. updated both for new filename.
1507 date changes. 2004->2005.
1508
1509 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1510 Removed 'quiet=True' from spawn() calls
1511
1512 10 May 2005; Preston Cody <codeman@gentoo.org> :
1513 Updated GLIUtility with patches from chotchki. Also added documentation
1514
1515 9 May 2005; Preston Cody <codeman@gentoo.org> :
1516 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1517 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1518 from bug #89683, mostly touchups.
1519
1520 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1521 GLIStorageDevice cleanup patch from bug #91761
1522
1523 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1524 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1525 _edit_config(). Error logging casts 'error' to str
1526
1527 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1528 Exceptions received in CC are logged before being passed to the FE. Added
1529 code to CC to handle exceptions *not* thrown by the installer itself.
1530
1531 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1532 get_max_mb_for_resize() returns -1 if not self.resizeable
1533
1534 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1535 More dirty rsync hacks :-/
1536
1537 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1538 Patches from chotchki (bug #90325) to improve CC networking. untested.
1539
1540 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1542 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1543 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1544 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1545 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1546 _get_packages_to_emerge()
1547
1548 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1549 Added group-adding code to set_users in ArchTemplate
1550
1551 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1552 Added post-install script code
1553
1554 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1555 Fixed encapsulation issues in GLIClientController (bug #90141)
1556
1557 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1558 Update resizing code in GLIStorageDevice
1559
1560 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1561 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1562
1563 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1564 Reverted change to ArchTemplate and added support for commented line in old
1565 code.
1566
1567 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1568 Changed _edit_config() to modify value in-place instead of commenting out and
1569 adding the new value to the end of the file.
1570
1571 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1572 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1573 Also updated TODO list.
1574
1575 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1576 Use blackace's one-liner to add comments for all function for use with
1577 pythondoc.
1578
1579 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1580 Moved 'end >= device_sectors' check out of loop to check for next partition's
1581 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1582 Partitioning code now tracks start/end of extended for placing logicals. End
1583 point of logical is now adjusted along with start.
1584
1585 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1586 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1587 the way of partitioning from a blank disk. Add int() around access to minor
1588 key in partition information due to new partition code leaving them as float.
1589
1590 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1591 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1592
1593 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1594 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1595
1596 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1597 Added support for DHCP options and MAC addresses in the InstallProfile.
1598
1599 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1600 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1601 sed to properly strip out junk.
1602
1603 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1604 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1605 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1606
1607 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1608 Fixed indent problem in GLICController
1609
1610 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1611 Check for disklabel type "loop" and use the device name without a minor.
1612
1613 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1614 Remove /tmp/compile_output.log and /var/log/install.log when install is
1615 complete. Added code to (hopefully) keep 2nd thread running after install.
1616 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1617 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1618 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1619
1620 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1621 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1622 when unpacking tarball.
1623
1624 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1625 rewrote filesystem_tools. looks like it works so ripping out all the old
1626 filesystem_tools code.
1627
1628 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1629 Changed the print statements to logging in the partitioning BE code.
1630 the logger may need to be imported to the x86archtemplate. unknown yet.
1631 Added the finishing_cleanup function.
1632 added a fix to the logger from BenUrban
1633
1634 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1635 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1636 URIs. The blank uri check has been commented out.
1637 ripped out error checking of set_services. this is done by _add_to_runlevel.
1638
1639 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1640 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1641
1642 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1643 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1644 the install profile if available. Commented out spawn() debugging prints
1645
1646 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1647 small changes to setup_network_post. moved adding to runlevel of net.x to
1648 after the device gets symlinked. added domainname runlevel command.
1649
1650 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1651 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1652 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1653 spawn() call in livecd-kernel code to pass environment variables.
1654 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1655 the install profile if available.
1656
1657 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1658 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1659 to handle installing the livecd kernel into the new system.
1660
1661 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1662 should emerge hotplug and coldplug before adding them to runlevel.
1663
1664 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1665 took chroot out of grub_install command.
1666
1667 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1668 Changed chroot wrapper code in spawn() to write the wrapper the python way
1669 instead of the bash way to avoid quote conflicts. Added
1670 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1671 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1672 as it breaks the piping.
1673
1674 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1675 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1676
1677 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1679 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1680 GLIInstallProfile.
1681
1682 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1683 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1684 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1685 into /mnt/gentoo in prepare_chroot()
1686
1687 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1688 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1689 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1690 to start/end sectors
1691
1692 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1693 Add 2>&1 to cmd in spawn()
1694
1695 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1696 Modified GLIUtility.exitsuccess() to work with return value from
1697 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1698 creates wrapper script for commands run inside chroot so multiple commands
1699 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1700 for the generated script from spawn()
1701
1702 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1703 Removed default values for stage tarball URI and portage tree URI from
1704 InstallProfile. These should be set by the FEs. also added services step to
1705 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1706 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1707
1708 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1709 Small fix for setting the default gateway. Also added feature to dialogfe.
1710
1711 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1712 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1713
1714 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1715 Fixed a bunch of true -> True typos. lots of em
1716 only write new resolv.conf if there are dns servers listed.
1717
1718 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1719 Commented out 'display_on_tty8=True' in start_portmap()
1720
1721 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1722 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1723
1724 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1725 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1726 lang parameter to __init__()
1727
1728 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1729 updates to TODO list.
1730
1731 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1732 Initial code for quickpkg GRP support. Fix loop to grab packages from
1733 'emerge -p blah'
1734
1735 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1736 check for dhcp in the network stuff and emerge it if it is.
1737 added quickpkg to TODO list
1738
1739 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1740 Changed the raising of 'warning' exceptions to a simple log of the error
1741 so that the installer can continue.
1742
1743 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1744 Some big changes. First, changed most output to display_on_tty8.
1745 Second, added log lines to all templates. Some smaller fixes such as typos.
1746 Also did some cleanups of old commented lines.
1747
1748 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1749 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1750 Undo change with fix. Escaping fix in GLIStorageDevice.py
1751
1752 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1753 more updates to TODO list. hopefully we'll soon start removing items instead
1754 of adding them.
1755
1756 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1757 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1758
1759 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1760 updated TODO list. (again)
1761
1762 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1763 changed output of portmap start to display_on_tty8.
1764 fixed bootloader for udev and multiple kernels
1765 fixed custom kernel config (again)
1766
1767 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1768 changed default value of CC._enable_ssh to True because this is smart.
1769 added code to allow custom kernel .config. may be unstable and break. sorry.
1770
1771 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1772 partition() now waits until after it checks for partition flags before delete
1773 the partitions :P
1774
1775 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1776 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1777 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1778 blank.
1779
1780 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1781 Various fixes related to the add_users function. Still not yet finished.
1782 Added things to the TODO list. Lets start using that!
1783
1784 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1785 Added code to x86Template to format newly created partitions. Also added
1786 some error checking code. GLIStorageDevice passes 'minor' with data to
1787 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1788 mounting code.
1789
1790 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1791 Took out unnecessary setting of random livecd root password. the cd already
1792 sets it randomly.
1793
1794 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1795 Took out an unneeded step from CC's run()
1796
1797 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1798 Attempt at detecting and adding windows partitions to lilo.
1799
1800 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1801 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1802 partition. fixed misc exit_status => exitstatus typo.
1803
1804 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1805 Added basic code for resizing filesystems with pyparted. Fixed code for
1806 resizing ntfs and ext2/3.
1807
1808 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1809 Fixed partition() in x86Template so that it scans through logicals and deletes
1810 before deleting containing extended partition. Also clears partition table to
1811 be safe before third pass.
1812
1813 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1814 Added mount_network_shares. not able to test it from this computer.
1815 will test when i get back to school.
1816 also added start_portmap to the client_controller as an always-do.
1817 agaffney says this is needed for NFS mounts to work.
1818
1819 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1820 Partial rewrite of partitioning code in x86Template. No longer shells out to
1821 parted to perform actions, now uses all pyparted calls. Code "works" in a
1822 test, but still needs lots of TLC. Also modified tests/install.py to work
1823 with x86Template and GLIClientConfiguration.
1824
1825 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1826 Initial move of partitioning code from ArchTemplate to x86Template.
1827
1828 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1829 Added grp_install and services to InstallProfile. forgot about the set_root_password
1830
1831 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1832 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1833 agaffney. Test Install ran very well (skipping partitioning).
1834
1835 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1836 My mid-day update. rewrote mount_local_partitions for order of mounting.
1837 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1838 partition format. fixed a few _edit_configs. some may still have eluded me.
1839
1840 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1841 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1842 to test it.
1843 Just finished mount_local_partitions in GLIArchitectureTemplate
1844
1845 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1846 Added get_num_sectors() to GLIStorageDevice.
1847
1848 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1849 GLIStorageDevice now tracks partition boundaries in sectors instead of
1850 cylinders.
1851 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1852 from GLIInstallProfile.
1853
1854 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1855 GLIStorageDevice returns "unknown" instead of "" for get_type()
1856
1857 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1858 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1859 actually work. Commented out resizability checking code for speed.
1860
1861 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1862 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1863 in GLIStorageDevice at the suggestion of plors
1864
1865 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1866 Added a function to GLIUtility to pull a value from a make.conf-style config
1867 file. Minor type fix to GLIInstallProfile.py
1868
1869 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1870 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1871 Separated network mounts from partition data structure in GLIInstallProfile
1872
1873 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1874 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1875 can be resized.
1876
1877 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1878 Added some of the final functions to GLIInstallTemplate.
1879 Yes this project is still active despite rare use of the Changelog!
1880
1881 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1882 Added the GLIPartitionTools.py file. This is a temporary insertion of
1883 partitioning tools that will eventually go into their own package.
1884
1885 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1886 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1887 run-time for the program). Added __init__(install_profile,
1888 client_configuration) to GLI.InstallProfile. This sets install_profile and
1889 client_configuration once so as to avoid constantly passing stuff every time
1890 we call a method.
1891
1892 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1893
1894 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1895 config files without messing up all the other stuff in them. This will be
1896 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1897
1898 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1899
1900 Added GLI.InstallTemplate framework. This is not yet functional. However,
1901 it does have a few basic things. I added two private methods. One is
1902 _depends(). This will be used for dependency checking (ie. unpacking a
1903 tarball requires that partitioning has been done). The other is
1904 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1905 instead of being run in the liveCD environment, it runs in the chroot. This
1906 requires a bit of fork() magic, so I isolated the code. Hope to work more
1907 this week to get this class formed...
1908
1909 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1910 Added SAX parsing. Made GLI.InstallProfile a subclass of
1911 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1912 to be lists instead of tuples to allow for easier modification (mutable,
1913 rather than immutable objects). Updated existing pydoc and added more.
1914 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1915 GLI.py a bit. Fixed all accessors to use self references.
1916 Added initial unit test code.
1917
1918 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1919 Added initial changelog. Setting up the basic structure of the CVS repository
1920 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1921 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20