/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1480 - (show annotations) (download)
Thu Jul 27 19:28:52 2006 UTC (8 years, 3 months ago) by wolf31o2
File size: 79664 byte(s)
I've commented out most of the code that used launch.  It wasn't working and we don't have the time to fix it before the release.  I'll look into it after the release and make it more robust and flexible.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.664 2006/07/27 19:28:52 wolf31o2 Exp $
4
5 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
6 I've commented out most of the code that used launch. It wasn't working and
7 we don't have the time to fix it before the release. I'll look into it after
8 the release and make it more robust and flexible.
9
10 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
11 src/GLIInstallProfile.py:
12 Added a few more applications to the list of extra packages to be merged,
13 all from various GRP sets.
14
15 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
16 Added launch variable to the end of each try-run with auth, which should
17 cause this to function properly. Of course, more testing is needed.
18
19 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
20 Fix a missed space in the installer script.
21
22 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
23 src/GLIClientController.py:
24 log version-stamp
25
26 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
27 Updated the installer script to allow specifying the front-end to run from
28 the command line. Currently, it only supports dialog and gtk. It still needs
29 some testing, however.
30
31 9 July 2006; Preston Cody <codeman@gentoo.org>
32 src/GLIGenDialog.py:
33 make lilo only show up for x86 if non-networkless
34
35 25 Jun 2006; Preston Cody <codeman@gentoo.org>
36 src/GLIGenDialog.py:
37 adding code to auto-add doscsi if a scsi drive detected.
38 this code is also in the gtkfe already
39
40 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
41 src/GLIPortage.py:
42 pass proper PORTAGE_TMPDIR
43
44 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
45 src/GLIUtility.py:
46 fix list_mirrors() to ignore <uri> lines that don't end on the same line
47
48 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
49 Added code to the mta step in AT to parse the install packages list and
50 look for mtas and if it finds it emerge it.
51 Initial attempt at moving extra_packages early in the setup to only show
52 local USE flags relating to those packages.
53 .. abandoned local USE project. no right way to do it.
54
55 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIUtility.py:
57 minor tweak to regex for parsing mirrors.xml
58
59 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/templates/x86ArchitectureTemplate.py:
61 make use of strict_start and strict_end in partition recreation
62
63 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
64 src/templates/x86ArchitectureTemplate.py:
65 add strict_start and strict_end parameters to _add_partition()
66 add _find_current_minor_for_part() function to help with resizing
67 fix logical/extended logic in _partition_delete_step()
68 in _partition_resize_step(), delete, recreate at new size, resize, delete
69 call resize2fs with no size argument so it fills entire partition
70 more logging
71 only delete, recreate, resize, delete if growing
72 pass new size to resize2fs in K
73
74 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
75 src/GLIStorageDevice.py:
76 call reorder_minors() from tidy_partitions() instead of
77 set_partitions_from_disk()
78 add code to reorder_minors() to take extended/logical into consideration with
79 non-free partitions
80
81 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
82 added a check of the length of the directory in /usr/src if under 6 characters
83 should fix bug 131809
84
85 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
86 src/GLIArchitectureTemplate.py:
87 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
88 and livecd-kernel
89
90 16 Apr 2006; Preston Cody <codeman@gentoo.org>
91 src/GLIGenDialog.py:
92 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
93
94 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIInstallProfile.py:
96 change kernel-modules to not be so stupid
97
98 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
99 GLIMD: fix display problem with execute.pyhtml.
100 make tables better.
101
102 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
103 src/GLIInstallProfile.py:
104 fix handling of int/float for minor
105 src/templates/x86ArchitectureTemplate.py:
106 save/restore partition name
107 src/GLIStorageDevice.py:
108 support for partition name
109
110 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
111 touchups to add_profile in GLIMD to link to webgli
112 add a save to GLIMD profile button in webgli's saveprofile
113 gliserv.py:
114 initial attempt at custom networking info per client. hostname support only.
115
116 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
117 src/net/server/html/webgli/partitioning[234].pyhtml:
118 small fixes for new partioning code
119
120 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
121 src/GLIClientController.py:
122 record PID of secondary thread
123
124 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/GLIGenDialog.py:
126 small fix for new partitioning code
127
128 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
129 src/GLIStorageDevice.py:
130 add get_devnode()
131 fix up detect_devices() to detect cciss/ida arrays
132 src/templates/x86ArchitectureTemplate.py:
133 use get_devnode() instead of figuring out the devnode
134 skip first 3 steps if partition layout hasn't changed
135 wipe disk and create new disklabel before recreating partitions
136 src/GLIArchitectureTemplate.py:
137 use get_devnode() in local mount and fstab stuff
138
139 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
140 src/GLIStorageDevice.py:
141 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
142
143 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
144 src/templates/x86ArchitectureTemplate.py:
145 continue breakup/cleanup of partitioning code
146
147 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
148 src/GLIStorageDevice.py:
149 set disklabel to default for arch when clearing the partition table
150 src/templates/x86ArchitectureTemplate.py:
151 complete rewrite of first and second passes
152
153 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
154 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
155 allow iterating over Device object to get partitions
156
157 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
158 src/GLIStorageDevice.py:
159 allow access to Device object like a dict
160
161 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIStorageDevice.py:
163 allow access to Partition object like a dict
164
165 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/templates/x86ArchitectureTemplate.py:
167 fail if any filesystems are mounted on the device being partitioned
168
169 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 reorder minor numbers when loading partitions from disk to match the physical
172 partition order
173
174 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
175 src/GLIStorageDevice.py:
176 overhaul for supporting mac disklabels and partitions out of disk order
177 remove free space from inside extended partition when extended is removed
178
179 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
180 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
181 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
182 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
183 Added bash scripts, icons, and desktop entries from the ebuild to make my
184 life easier.
185
186 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
187 src/GLIStorageDevice.py:
188 raise an exception if the existing partitions are out of disk order
189 look for minors out of order instead of disk position
190
191 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
192 src/fe/dialog/gli-dialog and src/GLIGenDialog:
193 added networkless mode to gli-dialog.
194
195 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
196 src/templates/x86AT:
197 add windows detection code for grub. untested.
198
199 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
200 src/templates/x86ArchitectureTemplate.py:
201 bootloader and partitioning external commands log to compile_output.log
202 wait for device node to exist before resizing
203 add -v to ntfsresize command
204 src/GLIStorageDevice.py:
205 return start/end with ip structure
206 pad min ntfs size by 50 MB just to be safe
207 src/GLIArchitectureTemplate.py:
208 only install filesystem tools for partitions with a mountpoint
209
210 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
211 add error catching and text to saving profile dialogs
212
213 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIPortage.py:
215 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
216 src/templates/x86ArchitectureTemplate.py:
217 fix checks for changed partitions so they will actually get deleted
218
219 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
220 src/GLIClientController.py:
221 slightly better error handling for pre-install failures
222
223 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
224 src/templates/x86ArchitectureTemplate.py:
225 proper return code checking for ext2/3 resizing
226
227 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
228 src/GLIClientController.py:
229 accept 'none' as well as 'null' for network type
230 src/GLIArchitectureTemplate.py:
231 ignore extended partitions in mount_local_partitions()
232 src/templates/x86ArchitectureTemplate.py:
233 use get_ordered_partition_list() instead of keys().sort() for new_part_list
234 check to make sure start sector for primary isn't less than end sector for
235 previous extended
236 src/GLIClientController.py:
237 write dns servers to /etc/resolv.conf
238
239 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
240 src/GLIPortage.py:
241 copy_pkg_to_chroot() uses compile_output.log for command output
242
243 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
244 only keep a 1000 line 'scrollback' buffer for the compile output and log file
245
246 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
247 src/GLIPortage.py:
248 add code make GLIPortage.py capable of being run stand-along for dynamic
249 stage3 generation and copying packages in a GRP-ish way
250 grp code fixups
251
252 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
253 src/GLIPortage.py:
254 ignore blank packages passed to get_deps() and emerge()
255
256 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
257 src/GLIUtility.py:
258 add get_chosts() function
259
260 *GLI-0.3 (12 Feb 2006)
261
262 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
263 src/templates/x86ArchitectureTemplate.py:
264 pull old start/end sector values from somewhere that actually has them
265 add logic for extended partition to code that makes sure new end sector
266 doesn't overlap start sector of next partitions
267 don't freak out if partition can't be deleted
268
269 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
270 src/GLIPortage.py:
271 run env-update at the end of copy_pkg_to_chroot()
272
273 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
274 src/templates/x86ArchitectureTemplate.py:
275 I'm a complete fscking dumbass. I recorded the end sector for partitions that
276 weren't being touched, but I never used it when recreating them...the end was
277 calculated from the size in MB instead :/
278
279 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
280 src/GLIArchitectureTemplate.py:
281 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
282 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
283 src/GLIPortage.py:
284 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
285 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
286 'resized' flag
287
288 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
289 src/GLIPortage.py:
290 short circuit and check vdb directly if package begins with '='
291
292 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
293 added more packages to extra_packages list in IP
294
295 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 src/templates/x86ArchitectureTemplate.py:
297 10 tries to create filesystem instead of 3
298 src/GLIPortage, src/GLIArchitectureTemplate.py:
299 ignore_missing flag for copy_pkg_to_chroot()
300
301 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
302 src/GLIPortage.py:
303 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
304
305 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
306 src/net/server/gliserv.py:
307 fix handling of 404 for real files
308 src/net/server/GLIServerProfile.py:
309 look for 'hostname' in attributes instead of 'name'
310
311 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
312 src/SimpleXMLParser.py:
313 initial support for 'include' in XML files
314 src/GLIStorageDevice.py:
315 initial support for %
316 src/GLIClientController.py:
317 add debugging statements to pre-install steps
318
319 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
320 webgli/configfiles:
321 check for key in etc_files['rc.conf'] to fix key error
322 webgli/timezone: small fix.
323 webgli/extrapackages: list-type fix
324 webgli/services: same
325 glimd: add/edit_client updates.
326
327 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
328 added configure.pyhtml to glimd. minor changes
329 to top and add_client. fixed up showargs.
330 added execute.pyhtml
331 changed register clients line in gliserv for name->hostname.
332 updated TODO.
333
334 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
335 src/net/server/*:
336 added add/del/edit client/profile.pythml for glimd.
337 updated templates, showclients, and gliserv.
338
339 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
340 src/net/server/*:
341 stupid threading module...
342
343 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
344 AT: rc.conf -> conf.d/clock
345
346 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
347 src/GLIPortage.py:
348 show 'Calculating dependencies for ...' in subprogress bar at beginning of
349 emerge()
350 src/GLIArchitectureTemplate.py:
351 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
352 in the chroot
353 remove _quickpkg_deps() and _portage_best_{visible,version}()
354 src/GLIUtility.py:
355 fail immediately in validate_uri() if provided URI can't be parsed
356 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
357 debug code in spawn()
358 use lower-level os.read() instead of file.read() because python sucks
359 src/templates/x86ArchitectureTemplate.py:
360 basic subprogress reporting for partitioning
361 total_steps was 1 too high
362
363 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
364 src/GLIUtility.py:
365 move parse_vdb_contents() to GLIPortage
366 src/GLIPortage.py:
367 remove all symlink fixups
368 ignore 'dir' entries in CONTENTS
369 call tar with -p
370
371 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
372 AT: bootsplash is now gensplash
373 gliserv: add advanced_mode to shared_info
374 webgli: Added advanced mode. mostly just disables a few screens.
375
376 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
377 src/GLIPortage.py:
378 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
379 added emerge()
380 update sub-progress after each package is emerged
381 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
382 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
383 remove link if it exists before moving content into place
384 src/GLIArchitectureTemplate.py:
385 install_packages() now calls emerge() in GLIPortage
386 change all calls to self._emerge() to self._portage.emerge()
387 comment out all emerge status checking...using exceptions now
388 call copy_pkg_to_chroot() directly for livecd-kernel
389
390 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
391 src/GLIArchitectureTemplate.py:
392 remove add_pkg_to_world() and copy_pkg_to_chroot()
393 copy installer.log to installer.log.failed on install failure
394 src/GLIUtility.py:
395 added get_keymaps()
396 spawn() takes any False argument for chroot instead of just None
397 src/GLIPortage.py:
398 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
399 change copy_pkg_to_chroot() to work properly with use_root=False
400 figure PORTAGE_TMPDIR properly
401
402 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
403 src/net/server/html/*:
404 converted showclients, load/saveprofile
405
406 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
407 src/GLIPortage.py:
408 exclude packages already in chroot vdb from binary deplist
409 chroot to use best_version for chroot's vdb
410 src/runtimedeps.py:
411 accept ROOT via commandline instead of env
412
413 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
414 src/runtimedeps.py:
415 remove passing of ROOT
416 src/GLIPortage.py:
417 modify get_deps() to get deptree for each package and merge into final list
418 remove depgraph class
419 add debugging code to get_deps()
420 src/GLIArchitectureTemplate.py:
421 combine code for GRP/compile in install_packages() into one block
422 debugging code in install_packages()
423
424 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
425 src/runtimedeps.py:
426 initial commit
427 src/GLIPortage.py:
428 use separate script for GRP deps
429 remove calls to portage module
430
431 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
432 src/GLIPortage.py:
433 initial commit
434 move some of portage function from GLIAT
435 flipped around a few function args
436 src/GLIArchitectureTemplate.py:
437 revamp install_packages() for new GLIPortage
438
439 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
440 src/GLIArchitectureTemplate.py:
441 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
442
443 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 src/net/server/gliserv.py:
445 wrap generated code in a class to isolate it a bit better
446 302 redirects work
447 don't use cgi.escape() for <% %>
448 src/net/server/html/webgli/*:
449 load/save profile
450 src/GLIUtility.py:
451 change /sbin/lspci to just lspci
452
453 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
454 src/GLIClientController.py:
455 change ordering of statements in CC run() while loop to not go past the end
456 of the array
457 src/GLIArchitectureTemplate.py:
458 removed redundant bind mounts
459
460 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
461 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
462 added a diagram by blackace from last night.
463 added the glossary in RTF format.
464
465 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
466 x86AT: separated out emerge/configure from running of bootloader
467 added MBR drive support to lilo.
468 these changes will likely not work.
469 AT: added setup_and_run_bootloader step.
470
471 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
472 src/net/server/gliserv.py:
473 call generated code in a function
474 src/net/server/html/webgli/*:
475 include top/bottom
476 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
477 src/GLIClientCongifuration.py:
478 install mode magic
479
480 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
481 src/GLIClientController.py:
482 use GLIException when there's an import problem
483 added debug code to show install_steps
484 src/templates/amd64ArchitectureTemplate.py:
485 add . to import path
486 proper path this time: ../../templates
487 src/GLIArchitectureTemplate.py:
488 add _portage_best_version() function
489
490 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
491 added initial glossary and gimli diagram to the docs directory.
492 modify gli-dialog to allow editing of the install_profile after loading XML.
493
494 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
495 src/net/server/html/webgli/:
496 converted globaluse, localuse, networkmounts, portagetree, and stageselection
497 moved saveclientconfig stuff into clientconfig
498 moved saveconfigfiles into config files
499 converted etc_portage and makedotconf
500 converted bootloader and kernel
501 convert daemons, extrapackages, networking, review, services, timezone, users
502 src/net/server/gliserv.py:
503 proper 404 handling for .pyhtml extension
504 HTML escape <% %> stuff
505 work around python's sucky regexes
506 src/GLIInstallProfile.py:
507 allow set_{rsync,ftp,http}_proxy() to accept empty values
508
509 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
510 src/net/server/gliserv.py:
511 initial commit of Legolas templating engine
512 302 redirects
513 src/net/server/html/index.html, src/net/server/webgli_template.html:
514 minor changes for new code
515 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
516 initial commit of the conversion from the monolithic WebGLIHandler.py to the
517 one file per path Legolas goodness
518 partitioning[2-4] done
519
520 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
521 webgli: dhcp options in CC and post-install.
522 updated comparison chart.
523 webgli: etc/portage/* and distcc support added. not too-well tested.
524
525 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
526 webgli_template.html: valign=top on left side.
527 webgli: fix bootloader boot_device. now working.
528 webgli: CC proxy done. post-install proxy in progress.
529
530 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
531 src/net/server/webgli_template.html:
532 increase padding for content cell to 7px and add colspan=2
533
534 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
535 webgli: added graphic bar on top
536 webgli: added hover effects on the links on the left
537 webgli: re-rendered header_bg.png to stretch without artifacts
538
539 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
540 webgli: make.conf disabling fixes for dynamic_stage3
541 fixed portage snapshot browse popup
542 all changes tested.
543 webgli: add debug mode to CC screen. the screen still needs lots of work.
544
545 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
546 added debug mode question to gli-dialog
547 added CC proxies to CC networking for gli-dialog
548 webgli: fixed skip CC networking if connection active
549 webgli: portage snapshot defaults to CD
550 webgli: bootloader mbr drive selection
551 webgli: USE flags unselectable if dynamic_stage3
552 webgli: manual extra packages and save button.
553
554 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
555 src/GLIUtility.py:
556 change ping count to 2
557 docs/comparison.html
558 initial commit
559
560 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
561 src/templates/x86ArchitectureTemplate.py:
562 fix map() issue with grub code
563 replace kernel_names and initrd_names loops with one-liners
564
565 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
566 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
567 initial gli-dialog support for recommended partitioning layout and clear.
568 failure cleanup now an option for gli-dialog.
569 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
570 added comparison list and updated TODO!
571
572 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
573 src/GLIArchitectureTemplate.py:
574 fix to stage1() debug code
575 fix to stage2() debug code
576
577 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
578 some more bootloader code fixes. forgot boot_device != mbr_device.
579
580 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 src/GLIStorageDevice.py:
582 fix to unallocated space merging when last one is after part 4
583
584 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
585 src/GLIArchitectureTemplate.py:
586 small fix to debugging code in copy_pkg_to_chroot()
587
588 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
589 more bugfixes with bootloader code
590 gli-dialog side appears to work
591
592 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
593 initial adding of boot_device to backend.
594 initial boot_device support added to gli-dialog.
595 some fixes of my poor coding
596
597 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
598 converted gli-dialog to use the install_package_list.
599 gtkfe has already been converted by AllanonJL
600 new way working in gli-dialog now and added to webgli.
601 added set/get_boot_device() to IP
602
603 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
604 get_install_package_list added to InstallProfile. This can be used by the FEs
605
606 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/templates/x86ArchitectureTemplate.py:
608 call ls with '-1 --color=no'
609
610 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
611 added warning (#9) to GRP ppl about stage3 tarballs
612
613 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
614 src/GLIArchitectureTemplate.py:
615 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
616 confused
617
618 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
619 removed protocols from rc.conf screens
620 finished initial rc.conf and make.conf in webgli
621
622 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
623 src/net/server/gliserv.py:
624 add -h option to usage()
625 show time and request URI in debug mode
626 show client IP in debug mode
627 just use IP instead of trying to do a reverse lookup
628
629 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
630 src/net/server/gliserv.py:
631 'classier' 401 message
632 proper commandline parsing
633 help via -h
634 user/pass can be specificed via commandline option
635
636 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
637 src/net/server/gliserv.py:
638 basic HTTP auth
639
640 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
641 src/net/server/gliserv.py:
642 dynamic module reloading (yipee!)
643 send 'Last-Modified' header for real files
644 respond to HEAD with just headers
645 src/net/server/handlers/WebGLIHandler.py:
646 icons for drives
647
648 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
649 src/net/server/handlers/WebGLIHandler.py:
650 initial 'pretty' partition table display support
651 clicking partition in 'pretty' display works instead of radio buttons
652 radio buttons and pretty display work together
653 META redirect instead of javascript
654 pretty display stretches across entire screen
655 'Recommended layout' and 'Clear drive' functions
656 properly catch exceptions from do_recommended()
657 src/GLIArchitectureTemplate.py:
658 replace preinst, copy, postinst, rm steps with qmerge
659 whoops...that shouldn't have been commented out
660 create image_dir with -p in copy_pkg_to_chroot()
661 more generic of symlink crappiness
662 new copy_pkg_to_chroot() actually works now
663
664 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
665 src/GLIStorageDevice.py:
666 initial generic disk support
667 fixes for add_partition() code
668 src/net/server/handlers/WebGLIHandler.py:
669 added support for creating generic disks
670 add new partition working
671 save and delete partitions
672
673 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
674 webgli: Partitioning making progress.
675
676 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
677 src/GLIArchitectureTemplate.py:
678 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
679 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
680 dir) and works around /etc/gconf symlink problem
681
682 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
683 webgli: lots of updates. preliminary partitioning. extra packages works.
684
685 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
686 src/net/server/gliserv.py:
687 httpd now supports HTTPS and falls back to HTTP if not available
688 make fallback actually work
689 src/net/server/SecureXMLRPCServer.py:
690 SecureSocketServer is now threaded
691
692 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
693 src/net/client/gliclient.py:
694 try to use HTTPS for XMLRPC first and fallback to HTTP
695 pretend mode
696 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
697 HTTPS XMLRPC goodness from samyron
698 pass name of certificate
699
700 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
701 wegli: daemons and services screens done.
702
703 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
704 webgli: networking and users screens
705 added return_redirect to handler.py
706 loading and saving install/client profiles works for webgli now
707 Review also done
708
709 *GLI-0.2 (27 Oct 2005)
710
711 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
712 src/templates/x86ArchitectureTemplate.py:
713 properly check for bootloader emerge exist status with exitsuccess()
714 log output of grub install command
715 add --batch --no-floppy to grub command
716 grubinstallstring only gets logged if debug is on
717 src/GLIUtility.py:
718 update progress bar to 100% when process finishes
719
720 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
721 src/GLIClientController.py:
722 added debugging code for the interaction between the 2 threads via Event()
723 src/GLIUtility.py:
724 doubled the buffer size in spawn()
725 bump buffer size up to 16384
726 only report progress in 5% increments
727 src/GLIArchitectureTemplate.py:
728 kernelpkgs.txt support code
729 above disabled because it sucks
730 added add_pkg_to_world()
731
732 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
733 src/GLIArchitectureTemplate.py:
734 use tar | tar to copy files in copy_pkg_to_chroot()
735 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
736
737 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
738 DEBUGGING ADDED TO AT. verbose field added to CConfig.
739
740 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
741 src/net/server/gliserv.py:
742 / maps to index.html
743 look for actual files in html/
744 src/net/html:
745 new template
746 src/GLIUtility.py:
747 added parse_vdb_contents()
748 src/GLIArchitectureTemplate.py:
749 added copy_pkg_to_chroot()
750 added debug code to dynamic-stage3
751 switch dynamic-stage3 to new method
752 lots of bug fixes from adding debug code
753
754 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
755 webgli initial bootloader support + changed make.conf.
756 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
757
758 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
759 src/GLIUtility.py:
760 horrible tangled mess of code that is tarball unpacking subprogress display
761 add unpack progress to portage snapshot
762 use read() instead of readlines() in spawn()
763 only update progress bar for whole percents
764
765 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
766 src/templates/x86ArchitectureTemplate.py:
767 change call to 'grub' to use GLIUtility.exitsuccess()
768 add definition of 'build_mode' in _configure_lilo()
769 src/misc/updategtkfe, src/misc/updateglid:
770 fix so subshell is called in root shell
771
772 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
773 src/net/server/handlers/WebGLIHandler.py:
774 stage screen launches URI browser in sized window with various properties set
775
776 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
777 src/misc/updategtkfe:
778 updated to actually work
779 remove previous snapshot and extracted dir before downloading
780 src/misc/updateglid:
781 updated to actually work
782 src/templates/x86ArchitectureTemplate.py:
783 fixed bug where grub code was looking for 'root+root+file_name2'
784
785 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 src/net/server/handlers/WebGLIHandler.py:
787 URI browser
788 added mirror selection
789 src/GLIUtility.py:
790 ls via ssh strips off ending *
791
792 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
793 more updates to webgli. stage selection.
794
795 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
796 updated webgli with preliminary Network Mounts support.
797
798 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
799 GenDialog: string formatting and yes/no label fixes.
800 added WebGLI template for gliserv.py
801 added WebGLIHandler as well as a definition for it in gliserv.py
802 updates to the webgli files even though they won't be there for long.
803 Utility: remove exception for non-existant grppkgs.txt until the new livecd
804 goes public.
805
806 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
807 src/net/server/gliserv.py:
808 override dict to not be so anal
809 main server now loads separate module to handle requests
810 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
811 split out profile URLs into separate handler function
812 move handlers into subdirectory
813 add Welcome and Clients handlers
814
815 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
816 src/GLIUtility.py:
817 raise exception if password prompt received twice
818
819 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
820 src/GLIUtility.py:
821 removed rot13ify()
822
823 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
824 src/net/server/gliserv.py:
825 allow for param to be passed multiple times in GET
826 no XMLRPC functions return None
827 modify POST request parsing to only create a list if needed
828 fix GET request parsing so the list creation for multiple values works
829 src/net/client/gliclient.py:
830 various typo and type mismatch fixes
831 exit after exception
832
833 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
834 src/net/client/gliclient.py:
835 initial commit
836 pass MAC to XMLRPC functions
837 src/net/server/GLIServerProfile.py:
838 rename GLIClientsProfiles to GLIServerProfile
839
840 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
841 src/net/server/gliserv.py:
842 now handles POST requests
843 move majority of request handling code to common_handler() to reduce code
844 duplication
845 profile loading
846 client reg via XMLRPC goes into SharedInfo()
847 /showclients redesign
848 template fixes
849 allow handler functions to add/change headers
850 save profile
851
852 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
853 src/net/server/GLIClientsProfiles.py:
854 initial commit
855 src/net/server/template.html:
856 initial commit
857 src/net/server/gliserv.py:
858 add template mojo
859
860 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
861 src/net/server/gliserv.py:
862 XMLRPC mojo
863
864 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
865 src/GLIArchitectureTemplate.py:
866 add code in _edit_config() to comment line where variable is defined
867 previously
868 insert new line under previous definition of variable if it exists
869 small _edit_config() cleanup
870 src/GLIStorageDevice.py:
871 add clear_partitions() function
872 new sizes for recommended partition layout
873 automatically calculate swap size for recommended layout
874
875 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
876 src/templates/x86ArchitectureTemplate.py:
877 fat16 mojo
878
879 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
880 src/GLIStorageDevice.py:
881 prevent do_recommended() from being run twice
882 rewrite do_recommended() to be more robust
883 src/GLIArchitectureTemplate.py:
884 rework _edit_config() to not write duplicate entries
885
886 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
887 src/GLIStorageDevice.py:
888 added do_recommended() function to automatically created 256M/1G/* layout
889
890 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
891 src/gli-dialog.py: added set_distcc to the list
892 GenDialog: added set_distcc. untested.
893 IP: added install_distcc flag.
894 AT: added install_distcc function based on the flag. runs after build_kernel
895 changed AT spawn command for distcc for nodeps.
896
897 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
898 src/GLIUtility.py:
899 add rot13ify() function
900
901 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
902 src/GenDialog.py:
903 added a sentence of text. unchecking support added.
904
905 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
906 src/GLIUtility.py:
907 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
908 src/GenDialog.py:
909 still working on extra_packages. transformed the list to new format.
910 added GRP indication to list. untested.
911 TODO lists updated.
912 src/fe/dialog/gli-dialog.py:
913 spelling mistook.
914
915 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
916 src/GLIUtility.py:
917 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
918
919 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/GLIUtility.py:
921 add get_directory_listing_from_uri()
922 add http support to above
923 add ftp support to above
924 add scp support to above
925 src/GLIArchitectureTemplate.py:
926 "0" instead of 0 for key of single-element dict passed to _edit_config()
927
928 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
929 value_only -> only_value
930
931 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
932 gutted out all of etc_portage structure since it is now all handled by
933 etc_files
934
935 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
936 src/GLIArchitectureTemplate.py:
937 install_packages() sends progress update notifications
938 src/templates/x86ArchitectureTemplate.py:
939 increase sleep to 5s between format tries
940 src/GLIClientController.py:
941 pass 'self' to AT instead of 'self._pretend'
942
943 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
944 logger -> logger.log in x86AT
945
946 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
947 added set_etc_portage to IP. debugging gli-d's support for it.
948
949 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
950 src/templates/x86ArchitectureTemplate.py:
951 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
952
953 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
954 src/GLIArchitectureTemplate.py:
955 add _portage_best_version() function and rework install_packages() to allow
956 for future X of Y tracking
957 Use best_visible instead of best_version
958 tracked down and fixed missing = causing empty install extra packages
959 use = when emerging also
960 quickpkg hokey pokey
961 run _get_packages_to_emerge() again with -pk
962
963 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
964 src/ArchTemplate:
965 removed install_xorg_x11, and put the xorg.conf copying at
966 the end of install_packages.
967 added updateglid to /src/misc
968 updated all core files with new GPL notice and copyright statement.
969
970 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
971 src/GLIUtility.py:
972 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
973 a snapshot in /mnt/cdrom/snapshots/
974 get_snapshot_from_cd() adds file:// at the beginning
975 change calls to extra package special case functions to 'self.blah'
976
977 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
978 src/ArchTemplate: changed "voodoo".
979 changed order of portage sync methods. made a fallback to webrsync if
980 normal emerge sync fails.
981 removed get_sources_from_cd because it is obsolete.
982 add special cases to install_packages. remove fatal exception on package
983 install failure b/c the box will still be bootable.
984 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
985 handled in the FEs.
986 src/GenDialog: added a bunch of code for dealing with x11-based packages.
987 awaiting testing.
988
989 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
990 src/GLIStorageDevice.py:
991 global try/except block around fs resizable detection code
992 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
993 install-failed cleanup function
994
995 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
996 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
997
998 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
999 GLIGenDialog:
1000 add drive choices for loaded configs.
1001 force snapshot for dynamic_stage3
1002 init the snapshoturi input to the cd snapshot if not already selected.
1003 if dynamic_stage3, skip the make.conf step.
1004 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1005 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1006
1007 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1008 src/GLIArchitectureTemplate.py:
1009 manually call MAKEDEV in stage3-dynamic code
1010 copy /etc/inittab.old to /etc/inittab in chroot
1011 src/GLIUtility.py:
1012 add beginning of validate_uri() function
1013 add file:/// support to validate_uri()
1014 single quotes when setting livecd password
1015
1016 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1017 src/GLIGenDialog.py:
1018 change getmountpoint() to get_mountpoint()
1019 src/misc/updategtkfe:
1020 committed script to automatically download latest snapshot and run gtkfe
1021 src/templates/x86ArchitectureTemplate.py:
1022 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1023 src/GLIArchitectureTemplate.py:
1024 give tmp_minor an initial value in mount_local_partitions so that the value
1025 remain from the previous drive
1026
1027 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1028 src/templates/x86ArchitectureTemplate.py:
1029 Fix _configure_lilo() for IP using GLISD stuff
1030 src/GLIArchitectureTemplate.py:
1031 install_cron_daemon() treats "none" specially
1032
1033 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1034 old patch from Steven Mertens to resolve bug #96642
1035 numerous asthetic changes to GenDialog, no real functionality changes though.
1036 strings renamed for global use if necessary.
1037 fix all three parts of bug 102291
1038 disable set_etc_portage until fully-written.
1039
1040 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1041 src/GLIClientController.py:
1042 lower-case http/ftp proxy envvars
1043
1044 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1045 src/GLIClientController.py:
1046 log end of pre_install steps to aid in debugging
1047 src/templates/x86ArchitectureTemplate.py:
1048 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1049
1050 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1051 src/GLIArchitectureTemplate.py:
1052 check to make sure that the device node we're wait for to exist isn't of
1053 type 'free'
1054
1055 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1056 src/GLIGenDialog.py:
1057 convert install_packages to list in set_extra_packages()
1058 check return code of checklist() call in "Manual" section
1059 *actually* fix the first problem
1060
1061 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1062 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1063 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1064
1065 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1066 src/GLIArchitectureTemplate.py:
1067 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1068
1069 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1070 Add CDATA support to SimpleXMLParser and add utility functions for it.
1071
1072 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1073 src/GLIArchitectureTemplate.py:
1074 Fix case where vixie-cron is specified as a full package atom, as we still
1075 don't want to run 'crontab /etc/crontab' for it.
1076
1077 *GLI-0.1 (3 Aug 2005)
1078
1079 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1080 add scp to list of is_uri() so GenDialog doesn't complain.
1081 fixed livecd-kernel bug in bootloader code.
1082 fixed gendialog for dynamic_stage3 instead of "networkless"
1083 change bootloader to allow for both initrd and initramfs.
1084 fix IP for dynamic_stage3.
1085 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1086
1087 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1088 Added full scp:// URI support to get_uri() in GLIUtility
1089 Remove "networkless" from dynamic stage3 if locic.
1090 Remove print statement from scp:// code.
1091 Change scp code to check for "assword: " instead of "Password:"
1092 Fix post-install network code to create net.eth1+ symlink correctly
1093 Check to make sure pkg can be split on / and some debugging code
1094 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1095 SimpleXMLParser handles True/False/None correctly now
1096 Comment out above fix
1097 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1098
1099 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1100 Removed a FIXME in the GLIClientConfiguration that is no
1101 longer needed.
1102
1103 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1104 Default to x86 in ClientConfig
1105 Typo in build-a-stage3 code.
1106 Remove MAKEDEV call in build-a-stage3 postscript.
1107
1108 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1109 Rewrote init of IP for gli-d. Other GenDialog updates.
1110 allow network_type to be None in CConfig.
1111
1112 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1113 Add _dynamic_stage3 option to IP.
1114 Add check for that option to dynamic stage3 code in ArchTemplate.
1115 Fix code to determine default route in get_eth_info() in GLIUtility.
1116 Fix serialization of dns-servers in ClientConfig.
1117
1118 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1119 changed default values of cron/logger in IP.
1120 moved GenDialog IP init out to the individual files. gli-dialog's version
1121 will change quite a bit.
1122
1123 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1124 added ppcArchTemplate. blank now. working on yaboot.
1125 modified ArchTemplate for amd64 and ppc custom kernels.
1126 skeleton implementation of _configure_yaboot.
1127 small fixes to other templates.
1128
1129 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1130 GenDialog updates. changed comment in IP.
1131
1132 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1133 src/GLIInstallProfile.py:
1134 Fix codeman's screwup of changing the service seperator to ',' in the parser
1135 without changing it in the serialization code! Also document this in a
1136 comment so you find it easier. Everybody needs to make sure they update
1137 their install profiles!
1138
1139 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1140 src/GLIArchitectureTemplate.py:
1141 Fix casting of list to string and concat of None with string, as well as
1142 commented prototype of checking that mounting actually worked (found a case
1143 where mount can return success, but the mount won't be done).
1144
1145 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1146 src/templates/x86ArchitectureTemplate.py:
1147 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1148 checking for the device, and sleeping 1 second each time.
1149
1150 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1151 src/templates/x86ArchitectureTemplate.py:
1152 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1153 bootloader works again. Also rename _install_{grub,lilo} to
1154 _configure_{grub,lilo} since they don't install the loaders anymore
1155 themselves.
1156
1157 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1158 fix global USE flags to not include the arch types at the end.
1159 updates to GenDialog and gli-d.
1160
1161 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1162 fixing bootloader code for no initrd and initrd->initramfs naming change.
1163
1164 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1165 Proper comments and parameters to GLIException in install_mta()
1166 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1167 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1168 list_tarball_from_mirror() to eliminate blank last item.
1169
1170 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1171 Added stage3 generation code.
1172
1173 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1174 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1175 Mild changes to GenDialog.
1176
1177 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1178 Remove separate install step configure_rc_conf() since it's handled by
1179 update_config_files()
1180 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1181 function is called twice on the same file.
1182
1183 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1184 Missing \ in sed in _get_packages_to_emerge()
1185 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1186 Check in _quickpkg_deps() to ignore blank package names returned from
1187 _get_packages_to_emerge()
1188
1189 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1190 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1191 in the dialog.py gauge code.
1192
1193 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1194 Add code to update_config_files() to go through etc_files and update stuff.
1195 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1196 Only use float() in partition xml parsing code if type == "free"
1197
1198 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1199 finished almost all internationalization of GenDialog.
1200 attempt at fixing rc.conf function. moved 3 generate functions out of
1201 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1202 added dialog.py to the fe/dialog directory so it actually gets used.
1203
1204 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1205 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1206
1207 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1208 fix extra entry in list_mirrors()
1209 beginning internationalization runthrough.
1210
1211 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 added dialog.py to /src temporarily until it gets accepted upstream.
1213 fix for unused value in form in dialog.py and changed heights.
1214 fix GenDialog forms.
1215
1216 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1217 Changed hostname/domainname for new baselayout.
1218 Changed _add_to_runlevel errors to logs.
1219 Updated TODO list to show status of GenDialog
1220 More updates to GenDialog including two checklists that probably won't work.
1221 update IP to use comma-separated list instead of space separated for services.
1222
1223 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1224 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1225 GenDialog as it gets closer to completion.
1226
1227 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1228 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1229 instead of int() in add_partition_device_partition() for minor (closes 96804)
1230
1231 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1232 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1233 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1234 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1235
1236 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1237 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1238 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1239 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1240 Fix undefined variable 'output' issue in spawn().
1241
1242 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1243 More updates to GenDialog and gli-d.
1244
1245 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1246 Modify list_mirrors() to return a list of mirror URL/name pairs.
1247
1248 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1249 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1250 get subarch.
1251
1252 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1253 Backend partitioning will create disklabel is none exists. Installprofile
1254 defaults to "" now instead of "msdos" for disklabel type. Fix for
1255 mount_local_partitions() to remember device along with minor in the
1256 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1257 add else block to log unsupported netmount types to mount_network_shares()
1258
1259 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1260 src/GLIArchitectureTemplate.py:
1261 Refactor kernel_compile common stuff, fix 2.4 build process.
1262 src/fe/cli/clife.py:
1263 Logging system.
1264 src/GLIUtility.py, src/GLIStorageDevice.py:
1265 Add comments about re-writes needed for boxes without sysfs.
1266
1267 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1268 src/GLIArchitectureTemplate.py:
1269 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1270 'make dep' call for custom compile. build_mode support for prepare-only and
1271 none types completed. custom compile function chains shell functions in
1272 spawned script, to allow for catching all errors.
1273
1274 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1275 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1276 and GenDialog. other gendialog updates as well. kernel updates untested.
1277
1278 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1279 src/GLIInstallProfile.py:
1280 Change structure of etc-portage stuff. The serialization was broken before my
1281 last commit, and I am the only person that's ever used it. The new schema is
1282 as follows:
1283 <etc-portage>
1284 <file name="package.mask"/>
1285 <file name="package.unmask">
1286 <entry atom="sys-kernel/openmosix-sources"/>
1287 </file>
1288 <file name="package.use">
1289 <entry atom="sys-libs/db">
1290 -java
1291 </entry>
1292 <entry atom="dev-libs/cyrus-sasl">
1293 -ldap
1294 </entry>
1295 </file>
1296 </etc-portage>
1297
1298
1299 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1300 src/GLIInstallProfile.py:
1301 Add new entry for gli-profile/kernel-build-method item. Add missing
1302 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1303 keys in the same order.
1304
1305 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1306 src/GLIArchitectureTemplate.py:
1307 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1308 was repeatedly appended to make.conf.
1309
1310 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1311 src/GLIArchitectureTemplate.py:
1312 Put some Linux-2.6 specific code under a if statement. Store list of
1313 successfully mounted swap device for using swapoff. Add proper error checking
1314 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1315 'file'. Clean up some redundant code (thanks to pychecker).'
1316
1317 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1318 Fix typos: get_extended() instead of get_extended_partition(). Added
1319 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1320 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1321
1322 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1323 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1324 in add_network_interface.
1325
1326 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1327 src/GLIArchitectureTemplate.py:
1328 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1329 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1330 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1331 prepare_chroot.
1332
1333 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1334 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1335 +src/fe/installer-gtk:
1336 Add new automated CLI frontend. Add scripts that are the intended means to
1337 use each frontend.
1338
1339 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1340 src/GLIClientController.py:
1341 Add null type to network config, for cases where the interface is already up
1342 and should not be touched (netboot for example).
1343
1344 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1345 src/GLIArchitectureTemplate.py:
1346 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1347 string!. Try to use binary packages if available by default.
1348
1349 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1350 src/GLIArchitectureTemplate.py:
1351 More error checking for _add_to_runlevel, to ensure that the init script
1352 actually exists before we try to add it. set_services phase must take place
1353 after the package installation, otherwise the init scripts might not exist.
1354 Find the correct init script for the cron and logging daemons, and add that
1355 instead of the package atom.
1356
1357 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1358 src/GLIArchitectureTemplate.py:
1359 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1360 usage of 'file' to 'contents' for the variable name, as it shadows
1361 __builtin__.file.
1362
1363 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1364 src/GLIArchitectureTemplate.py:
1365 Add MTA install code, and include MTA install phase. Ensure
1366 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1367 for 'none' kernel config for build_kernel phase. Put kernel_script in
1368 /var/tmp instead of /root for build_kernel phase.
1369
1370 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1371 Rename mta variables to match syslog/cron variables.
1372
1373 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1374 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1375 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1376 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1377 src/templates/.cvsignore, src/tests/.cvsignore:
1378 Refactor partition formatting again to include error checking. Allow 'none'
1379 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1380
1381 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1382 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1383 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1384 only have a single spawn call.
1385
1386 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1387 refixed samyron's fix of set_architecture_template.
1388
1389 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1390 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1391 be executable.
1392
1393 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1394 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1395 error checking when you call set_architecture_template.
1396
1397 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1398 moved the mkfsopts input to the partition options menu instead of the during
1399 the creation process. updated GenDialog to say it supports reiserfs v3.
1400
1401 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1402 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1403 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1404 Add support for other partition types to dialogfe.
1405 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1406 avoid integer overflows and wraparounds.
1407
1408 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1409 Removed start/end from XML output and added mkfsopts to partitioning info.
1410 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1411 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1412 in GLIClientConfiguration. Change from .1 and .9 to constants for
1413 partitioning. Fix free space overwriting bug. Remove a few unused functions
1414 from rewrite. Fix call to get_partition_at()
1415
1416 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1417 Updates to GenDialog and dialogfe.
1418
1419 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1420 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1421
1422 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1423 more GenDialog updates to partitioning.
1424
1425 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1426 Indenting issue in GLISD/get_ordered_partition_list.
1427 updates to GenDialog partitioning and added default UTC for timezone in IP.
1428
1429 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1430 Added GLISD.get_model()
1431
1432 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1433 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1434 More updates to GenDialog :)
1435
1436 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1437 Added get_interface_realname() function.
1438
1439 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1440 Added auto-save of CConfig and copying to new /root after install.
1441 yet even more GenDialog updates.
1442
1443 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1444 removed print statement from GLISD. more updates to GenDialog.
1445
1446 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1447 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1448 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1449 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1450 places in GLIClientConfiguration.
1451
1452 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1453 Fix mount_local_partitions(), configure_fstab(), and
1454 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1455 A few more fixes for templates/x86Archtemplate
1456
1457 27 May 2005; Preston Cody <codeman@gentoo.org> :
1458 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1459 a work in progress.
1460
1461 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1462 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1463 directly. GLISD can now handle data imported from XML.
1464
1465 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1466 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1467 handle blank (no disklabel) disks.
1468
1469 20 May 2005; Preston Cody <codeman@gentoo.org> :
1470 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1471 up, documented, and separated out serialization and grouped all sections.
1472
1473 19 May 2005; Preston Cody <codeman@gentoo.org> :
1474 Reorganization of ClientConfiguration and gutting of unused functions.
1475 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1476
1477 18 May 2005; Preston Cody <codeman@gentoo.org> :
1478 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1479
1480 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1481 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1482 partitioning. CC serializes install profile to disk and prepare_chroot()
1483 copies it into /mnt/gentoo/root
1484
1485 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1486 Moved URI parsing into new function parse_uri()
1487
1488 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1489 Added XMLParser module.
1490
1491 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1492 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1493 Minor fix to is_uri() regex to allow hyphens in hostname.
1494
1495 12 May 2005; Preston Cody <codeman@gentoo.org> :
1496 Updated finishing_cleanup for new unmounting method from agaffney.
1497
1498 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1499 Fix GLILogger to use correct time format string. Fix _edit_config() to
1500 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1501 unicode support to is_realstring().
1502
1503 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1504 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1505 return value instead of non-zero. Add code to output a traceback to the
1506 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1507 instead of --nocolor.
1508
1509 10 May 2005; Preston Cody <codeman@gentoo.org> :
1510 Added GLIGenDialog.py to make a generic class for the dialog functions that
1511 can be used by both dialogfe and the netfe/be. updated both for new filename.
1512 date changes. 2004->2005.
1513
1514 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1515 Removed 'quiet=True' from spawn() calls
1516
1517 10 May 2005; Preston Cody <codeman@gentoo.org> :
1518 Updated GLIUtility with patches from chotchki. Also added documentation
1519
1520 9 May 2005; Preston Cody <codeman@gentoo.org> :
1521 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1522 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1523 from bug #89683, mostly touchups.
1524
1525 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1526 GLIStorageDevice cleanup patch from bug #91761
1527
1528 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1529 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1530 _edit_config(). Error logging casts 'error' to str
1531
1532 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1533 Exceptions received in CC are logged before being passed to the FE. Added
1534 code to CC to handle exceptions *not* thrown by the installer itself.
1535
1536 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 get_max_mb_for_resize() returns -1 if not self.resizeable
1538
1539 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1540 More dirty rsync hacks :-/
1541
1542 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1543 Patches from chotchki (bug #90325) to improve CC networking. untested.
1544
1545 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1546 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1547 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1548 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1549 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1550 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1551 _get_packages_to_emerge()
1552
1553 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1554 Added group-adding code to set_users in ArchTemplate
1555
1556 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1557 Added post-install script code
1558
1559 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1560 Fixed encapsulation issues in GLIClientController (bug #90141)
1561
1562 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1563 Update resizing code in GLIStorageDevice
1564
1565 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1566 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1567
1568 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1569 Reverted change to ArchTemplate and added support for commented line in old
1570 code.
1571
1572 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1573 Changed _edit_config() to modify value in-place instead of commenting out and
1574 adding the new value to the end of the file.
1575
1576 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1577 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1578 Also updated TODO list.
1579
1580 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1581 Use blackace's one-liner to add comments for all function for use with
1582 pythondoc.
1583
1584 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1585 Moved 'end >= device_sectors' check out of loop to check for next partition's
1586 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1587 Partitioning code now tracks start/end of extended for placing logicals. End
1588 point of logical is now adjusted along with start.
1589
1590 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1591 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1592 the way of partitioning from a blank disk. Add int() around access to minor
1593 key in partition information due to new partition code leaving them as float.
1594
1595 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1596 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1597
1598 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1599 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1600
1601 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1602 Added support for DHCP options and MAC addresses in the InstallProfile.
1603
1604 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1605 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1606 sed to properly strip out junk.
1607
1608 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1609 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1610 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1611
1612 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1613 Fixed indent problem in GLICController
1614
1615 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 Check for disklabel type "loop" and use the device name without a minor.
1617
1618 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1619 Remove /tmp/compile_output.log and /var/log/install.log when install is
1620 complete. Added code to (hopefully) keep 2nd thread running after install.
1621 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1622 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1623 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1624
1625 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1626 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1627 when unpacking tarball.
1628
1629 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1630 rewrote filesystem_tools. looks like it works so ripping out all the old
1631 filesystem_tools code.
1632
1633 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1634 Changed the print statements to logging in the partitioning BE code.
1635 the logger may need to be imported to the x86archtemplate. unknown yet.
1636 Added the finishing_cleanup function.
1637 added a fix to the logger from BenUrban
1638
1639 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1640 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1641 URIs. The blank uri check has been commented out.
1642 ripped out error checking of set_services. this is done by _add_to_runlevel.
1643
1644 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1645 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1646
1647 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1648 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1649 the install profile if available. Commented out spawn() debugging prints
1650
1651 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1652 small changes to setup_network_post. moved adding to runlevel of net.x to
1653 after the device gets symlinked. added domainname runlevel command.
1654
1655 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1657 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1658 spawn() call in livecd-kernel code to pass environment variables.
1659 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1660 the install profile if available.
1661
1662 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1663 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1664 to handle installing the livecd kernel into the new system.
1665
1666 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1667 should emerge hotplug and coldplug before adding them to runlevel.
1668
1669 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1670 took chroot out of grub_install command.
1671
1672 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1673 Changed chroot wrapper code in spawn() to write the wrapper the python way
1674 instead of the bash way to avoid quote conflicts. Added
1675 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1676 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1677 as it breaks the piping.
1678
1679 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1680 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1681
1682 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1683 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1684 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1685 GLIInstallProfile.
1686
1687 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1688 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1689 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1690 into /mnt/gentoo in prepare_chroot()
1691
1692 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1693 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1694 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1695 to start/end sectors
1696
1697 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1698 Add 2>&1 to cmd in spawn()
1699
1700 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1701 Modified GLIUtility.exitsuccess() to work with return value from
1702 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1703 creates wrapper script for commands run inside chroot so multiple commands
1704 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1705 for the generated script from spawn()
1706
1707 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1708 Removed default values for stage tarball URI and portage tree URI from
1709 InstallProfile. These should be set by the FEs. also added services step to
1710 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1711 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1712
1713 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1714 Small fix for setting the default gateway. Also added feature to dialogfe.
1715
1716 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1717 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1718
1719 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1720 Fixed a bunch of true -> True typos. lots of em
1721 only write new resolv.conf if there are dns servers listed.
1722
1723 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1724 Commented out 'display_on_tty8=True' in start_portmap()
1725
1726 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1727 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1728
1729 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1730 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1731 lang parameter to __init__()
1732
1733 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1734 updates to TODO list.
1735
1736 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1737 Initial code for quickpkg GRP support. Fix loop to grab packages from
1738 'emerge -p blah'
1739
1740 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1741 check for dhcp in the network stuff and emerge it if it is.
1742 added quickpkg to TODO list
1743
1744 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1745 Changed the raising of 'warning' exceptions to a simple log of the error
1746 so that the installer can continue.
1747
1748 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1749 Some big changes. First, changed most output to display_on_tty8.
1750 Second, added log lines to all templates. Some smaller fixes such as typos.
1751 Also did some cleanups of old commented lines.
1752
1753 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1754 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1755 Undo change with fix. Escaping fix in GLIStorageDevice.py
1756
1757 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1758 more updates to TODO list. hopefully we'll soon start removing items instead
1759 of adding them.
1760
1761 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1762 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1763
1764 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1765 updated TODO list. (again)
1766
1767 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1768 changed output of portmap start to display_on_tty8.
1769 fixed bootloader for udev and multiple kernels
1770 fixed custom kernel config (again)
1771
1772 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1773 changed default value of CC._enable_ssh to True because this is smart.
1774 added code to allow custom kernel .config. may be unstable and break. sorry.
1775
1776 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1777 partition() now waits until after it checks for partition flags before delete
1778 the partitions :P
1779
1780 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1781 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1782 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1783 blank.
1784
1785 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1786 Various fixes related to the add_users function. Still not yet finished.
1787 Added things to the TODO list. Lets start using that!
1788
1789 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1790 Added code to x86Template to format newly created partitions. Also added
1791 some error checking code. GLIStorageDevice passes 'minor' with data to
1792 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1793 mounting code.
1794
1795 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1796 Took out unnecessary setting of random livecd root password. the cd already
1797 sets it randomly.
1798
1799 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1800 Took out an unneeded step from CC's run()
1801
1802 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1803 Attempt at detecting and adding windows partitions to lilo.
1804
1805 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1806 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1807 partition. fixed misc exit_status => exitstatus typo.
1808
1809 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1810 Added basic code for resizing filesystems with pyparted. Fixed code for
1811 resizing ntfs and ext2/3.
1812
1813 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1814 Fixed partition() in x86Template so that it scans through logicals and deletes
1815 before deleting containing extended partition. Also clears partition table to
1816 be safe before third pass.
1817
1818 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1819 Added mount_network_shares. not able to test it from this computer.
1820 will test when i get back to school.
1821 also added start_portmap to the client_controller as an always-do.
1822 agaffney says this is needed for NFS mounts to work.
1823
1824 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1825 Partial rewrite of partitioning code in x86Template. No longer shells out to
1826 parted to perform actions, now uses all pyparted calls. Code "works" in a
1827 test, but still needs lots of TLC. Also modified tests/install.py to work
1828 with x86Template and GLIClientConfiguration.
1829
1830 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1831 Initial move of partitioning code from ArchTemplate to x86Template.
1832
1833 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1834 Added grp_install and services to InstallProfile. forgot about the set_root_password
1835
1836 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1837 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1838 agaffney. Test Install ran very well (skipping partitioning).
1839
1840 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1841 My mid-day update. rewrote mount_local_partitions for order of mounting.
1842 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1843 partition format. fixed a few _edit_configs. some may still have eluded me.
1844
1845 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1846 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1847 to test it.
1848 Just finished mount_local_partitions in GLIArchitectureTemplate
1849
1850 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1851 Added get_num_sectors() to GLIStorageDevice.
1852
1853 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1854 GLIStorageDevice now tracks partition boundaries in sectors instead of
1855 cylinders.
1856 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1857 from GLIInstallProfile.
1858
1859 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1860 GLIStorageDevice returns "unknown" instead of "" for get_type()
1861
1862 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1863 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1864 actually work. Commented out resizability checking code for speed.
1865
1866 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1867 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1868 in GLIStorageDevice at the suggestion of plors
1869
1870 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1871 Added a function to GLIUtility to pull a value from a make.conf-style config
1872 file. Minor type fix to GLIInstallProfile.py
1873
1874 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1875 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1876 Separated network mounts from partition data structure in GLIInstallProfile
1877
1878 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1879 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1880 can be resized.
1881
1882 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1883 Added some of the final functions to GLIInstallTemplate.
1884 Yes this project is still active despite rare use of the Changelog!
1885
1886 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1887 Added the GLIPartitionTools.py file. This is a temporary insertion of
1888 partitioning tools that will eventually go into their own package.
1889
1890 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1891 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1892 run-time for the program). Added __init__(install_profile,
1893 client_configuration) to GLI.InstallProfile. This sets install_profile and
1894 client_configuration once so as to avoid constantly passing stuff every time
1895 we call a method.
1896
1897 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1898
1899 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1900 config files without messing up all the other stuff in them. This will be
1901 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1902
1903 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1904
1905 Added GLI.InstallTemplate framework. This is not yet functional. However,
1906 it does have a few basic things. I added two private methods. One is
1907 _depends(). This will be used for dependency checking (ie. unpacking a
1908 tarball requires that partitioning has been done). The other is
1909 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1910 instead of being run in the liveCD environment, it runs in the chroot. This
1911 requires a bit of fork() magic, so I isolated the code. Hope to work more
1912 this week to get this class formed...
1913
1914 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1915 Added SAX parsing. Made GLI.InstallProfile a subclass of
1916 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1917 to be lists instead of tuples to allow for easier modification (mutable,
1918 rather than immutable objects). Updated existing pydoc and added more.
1919 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1920 GLI.py a bit. Fixed all accessors to use self references.
1921 Added initial unit test code.
1922
1923 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1924 Added initial changelog. Setting up the basic structure of the CVS repository
1925 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1926 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20