/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1481 - (show annotations) (download)
Fri Jul 28 18:40:33 2006 UTC (8 years ago) by agaffney
File size: 79805 byte(s)
  src/templates/x86ArchitectureTemplate.py:
  clip logical partition at end of extended

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.665 2006/07/28 18:40:33 agaffney Exp $
4
5 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
6 I've commented out most of the code that used launch. It wasn't working and
7 we don't have the time to fix it before the release. I'll look into it after
8 the release and make it more robust and flexible.
9
10 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/templates/x86ArchitectureTemplate.py:
12 clip logical partition at end of extended
13
14 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
15 src/GLIInstallProfile.py:
16 Added a few more applications to the list of extra packages to be merged,
17 all from various GRP sets.
18
19 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
20 Added launch variable to the end of each try-run with auth, which should
21 cause this to function properly. Of course, more testing is needed.
22
23 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
24 Fix a missed space in the installer script.
25
26 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
27 src/GLIClientController.py:
28 log version-stamp
29
30 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
31 Updated the installer script to allow specifying the front-end to run from
32 the command line. Currently, it only supports dialog and gtk. It still needs
33 some testing, however.
34
35 9 July 2006; Preston Cody <codeman@gentoo.org>
36 src/GLIGenDialog.py:
37 make lilo only show up for x86 if non-networkless
38
39 25 Jun 2006; Preston Cody <codeman@gentoo.org>
40 src/GLIGenDialog.py:
41 adding code to auto-add doscsi if a scsi drive detected.
42 this code is also in the gtkfe already
43
44 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
45 src/GLIPortage.py:
46 pass proper PORTAGE_TMPDIR
47
48 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
49 src/GLIUtility.py:
50 fix list_mirrors() to ignore <uri> lines that don't end on the same line
51
52 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
53 Added code to the mta step in AT to parse the install packages list and
54 look for mtas and if it finds it emerge it.
55 Initial attempt at moving extra_packages early in the setup to only show
56 local USE flags relating to those packages.
57 .. abandoned local USE project. no right way to do it.
58
59 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/GLIUtility.py:
61 minor tweak to regex for parsing mirrors.xml
62
63 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
64 src/templates/x86ArchitectureTemplate.py:
65 make use of strict_start and strict_end in partition recreation
66
67 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
68 src/templates/x86ArchitectureTemplate.py:
69 add strict_start and strict_end parameters to _add_partition()
70 add _find_current_minor_for_part() function to help with resizing
71 fix logical/extended logic in _partition_delete_step()
72 in _partition_resize_step(), delete, recreate at new size, resize, delete
73 call resize2fs with no size argument so it fills entire partition
74 more logging
75 only delete, recreate, resize, delete if growing
76 pass new size to resize2fs in K
77
78 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
79 src/GLIStorageDevice.py:
80 call reorder_minors() from tidy_partitions() instead of
81 set_partitions_from_disk()
82 add code to reorder_minors() to take extended/logical into consideration with
83 non-free partitions
84
85 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
86 added a check of the length of the directory in /usr/src if under 6 characters
87 should fix bug 131809
88
89 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
90 src/GLIArchitectureTemplate.py:
91 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
92 and livecd-kernel
93
94 16 Apr 2006; Preston Cody <codeman@gentoo.org>
95 src/GLIGenDialog.py:
96 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
97
98 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIInstallProfile.py:
100 change kernel-modules to not be so stupid
101
102 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
103 GLIMD: fix display problem with execute.pyhtml.
104 make tables better.
105
106 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
107 src/GLIInstallProfile.py:
108 fix handling of int/float for minor
109 src/templates/x86ArchitectureTemplate.py:
110 save/restore partition name
111 src/GLIStorageDevice.py:
112 support for partition name
113
114 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
115 touchups to add_profile in GLIMD to link to webgli
116 add a save to GLIMD profile button in webgli's saveprofile
117 gliserv.py:
118 initial attempt at custom networking info per client. hostname support only.
119
120 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
121 src/net/server/html/webgli/partitioning[234].pyhtml:
122 small fixes for new partioning code
123
124 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/GLIClientController.py:
126 record PID of secondary thread
127
128 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
129 src/GLIGenDialog.py:
130 small fix for new partitioning code
131
132 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
133 src/GLIStorageDevice.py:
134 add get_devnode()
135 fix up detect_devices() to detect cciss/ida arrays
136 src/templates/x86ArchitectureTemplate.py:
137 use get_devnode() instead of figuring out the devnode
138 skip first 3 steps if partition layout hasn't changed
139 wipe disk and create new disklabel before recreating partitions
140 src/GLIArchitectureTemplate.py:
141 use get_devnode() in local mount and fstab stuff
142
143 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
144 src/GLIStorageDevice.py:
145 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
146
147 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
148 src/templates/x86ArchitectureTemplate.py:
149 continue breakup/cleanup of partitioning code
150
151 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIStorageDevice.py:
153 set disklabel to default for arch when clearing the partition table
154 src/templates/x86ArchitectureTemplate.py:
155 complete rewrite of first and second passes
156
157 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
158 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
159 allow iterating over Device object to get partitions
160
161 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIStorageDevice.py:
163 allow access to Device object like a dict
164
165 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIStorageDevice.py:
167 allow access to Partition object like a dict
168
169 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py:
171 fail if any filesystems are mounted on the device being partitioned
172
173 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIStorageDevice.py:
175 reorder minor numbers when loading partitions from disk to match the physical
176 partition order
177
178 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
179 src/GLIStorageDevice.py:
180 overhaul for supporting mac disklabels and partitions out of disk order
181 remove free space from inside extended partition when extended is removed
182
183 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
184 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
185 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
186 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
187 Added bash scripts, icons, and desktop entries from the ebuild to make my
188 life easier.
189
190 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
191 src/GLIStorageDevice.py:
192 raise an exception if the existing partitions are out of disk order
193 look for minors out of order instead of disk position
194
195 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
196 src/fe/dialog/gli-dialog and src/GLIGenDialog:
197 added networkless mode to gli-dialog.
198
199 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
200 src/templates/x86AT:
201 add windows detection code for grub. untested.
202
203 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
204 src/templates/x86ArchitectureTemplate.py:
205 bootloader and partitioning external commands log to compile_output.log
206 wait for device node to exist before resizing
207 add -v to ntfsresize command
208 src/GLIStorageDevice.py:
209 return start/end with ip structure
210 pad min ntfs size by 50 MB just to be safe
211 src/GLIArchitectureTemplate.py:
212 only install filesystem tools for partitions with a mountpoint
213
214 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
215 add error catching and text to saving profile dialogs
216
217 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
218 src/GLIPortage.py:
219 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
220 src/templates/x86ArchitectureTemplate.py:
221 fix checks for changed partitions so they will actually get deleted
222
223 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
224 src/GLIClientController.py:
225 slightly better error handling for pre-install failures
226
227 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
228 src/templates/x86ArchitectureTemplate.py:
229 proper return code checking for ext2/3 resizing
230
231 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
232 src/GLIClientController.py:
233 accept 'none' as well as 'null' for network type
234 src/GLIArchitectureTemplate.py:
235 ignore extended partitions in mount_local_partitions()
236 src/templates/x86ArchitectureTemplate.py:
237 use get_ordered_partition_list() instead of keys().sort() for new_part_list
238 check to make sure start sector for primary isn't less than end sector for
239 previous extended
240 src/GLIClientController.py:
241 write dns servers to /etc/resolv.conf
242
243 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
244 src/GLIPortage.py:
245 copy_pkg_to_chroot() uses compile_output.log for command output
246
247 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
248 only keep a 1000 line 'scrollback' buffer for the compile output and log file
249
250 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
251 src/GLIPortage.py:
252 add code make GLIPortage.py capable of being run stand-along for dynamic
253 stage3 generation and copying packages in a GRP-ish way
254 grp code fixups
255
256 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
257 src/GLIPortage.py:
258 ignore blank packages passed to get_deps() and emerge()
259
260 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
261 src/GLIUtility.py:
262 add get_chosts() function
263
264 *GLI-0.3 (12 Feb 2006)
265
266 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
267 src/templates/x86ArchitectureTemplate.py:
268 pull old start/end sector values from somewhere that actually has them
269 add logic for extended partition to code that makes sure new end sector
270 doesn't overlap start sector of next partitions
271 don't freak out if partition can't be deleted
272
273 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
274 src/GLIPortage.py:
275 run env-update at the end of copy_pkg_to_chroot()
276
277 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
278 src/templates/x86ArchitectureTemplate.py:
279 I'm a complete fscking dumbass. I recorded the end sector for partitions that
280 weren't being touched, but I never used it when recreating them...the end was
281 calculated from the size in MB instead :/
282
283 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
284 src/GLIArchitectureTemplate.py:
285 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
286 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
287 src/GLIPortage.py:
288 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
289 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
290 'resized' flag
291
292 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
293 src/GLIPortage.py:
294 short circuit and check vdb directly if package begins with '='
295
296 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
297 added more packages to extra_packages list in IP
298
299 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
300 src/templates/x86ArchitectureTemplate.py:
301 10 tries to create filesystem instead of 3
302 src/GLIPortage, src/GLIArchitectureTemplate.py:
303 ignore_missing flag for copy_pkg_to_chroot()
304
305 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
306 src/GLIPortage.py:
307 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
308
309 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
310 src/net/server/gliserv.py:
311 fix handling of 404 for real files
312 src/net/server/GLIServerProfile.py:
313 look for 'hostname' in attributes instead of 'name'
314
315 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
316 src/SimpleXMLParser.py:
317 initial support for 'include' in XML files
318 src/GLIStorageDevice.py:
319 initial support for %
320 src/GLIClientController.py:
321 add debugging statements to pre-install steps
322
323 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
324 webgli/configfiles:
325 check for key in etc_files['rc.conf'] to fix key error
326 webgli/timezone: small fix.
327 webgli/extrapackages: list-type fix
328 webgli/services: same
329 glimd: add/edit_client updates.
330
331 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
332 added configure.pyhtml to glimd. minor changes
333 to top and add_client. fixed up showargs.
334 added execute.pyhtml
335 changed register clients line in gliserv for name->hostname.
336 updated TODO.
337
338 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
339 src/net/server/*:
340 added add/del/edit client/profile.pythml for glimd.
341 updated templates, showclients, and gliserv.
342
343 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
344 src/net/server/*:
345 stupid threading module...
346
347 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
348 AT: rc.conf -> conf.d/clock
349
350 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
351 src/GLIPortage.py:
352 show 'Calculating dependencies for ...' in subprogress bar at beginning of
353 emerge()
354 src/GLIArchitectureTemplate.py:
355 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
356 in the chroot
357 remove _quickpkg_deps() and _portage_best_{visible,version}()
358 src/GLIUtility.py:
359 fail immediately in validate_uri() if provided URI can't be parsed
360 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
361 debug code in spawn()
362 use lower-level os.read() instead of file.read() because python sucks
363 src/templates/x86ArchitectureTemplate.py:
364 basic subprogress reporting for partitioning
365 total_steps was 1 too high
366
367 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
368 src/GLIUtility.py:
369 move parse_vdb_contents() to GLIPortage
370 src/GLIPortage.py:
371 remove all symlink fixups
372 ignore 'dir' entries in CONTENTS
373 call tar with -p
374
375 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
376 AT: bootsplash is now gensplash
377 gliserv: add advanced_mode to shared_info
378 webgli: Added advanced mode. mostly just disables a few screens.
379
380 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
381 src/GLIPortage.py:
382 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
383 added emerge()
384 update sub-progress after each package is emerged
385 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
386 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
387 remove link if it exists before moving content into place
388 src/GLIArchitectureTemplate.py:
389 install_packages() now calls emerge() in GLIPortage
390 change all calls to self._emerge() to self._portage.emerge()
391 comment out all emerge status checking...using exceptions now
392 call copy_pkg_to_chroot() directly for livecd-kernel
393
394 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
395 src/GLIArchitectureTemplate.py:
396 remove add_pkg_to_world() and copy_pkg_to_chroot()
397 copy installer.log to installer.log.failed on install failure
398 src/GLIUtility.py:
399 added get_keymaps()
400 spawn() takes any False argument for chroot instead of just None
401 src/GLIPortage.py:
402 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
403 change copy_pkg_to_chroot() to work properly with use_root=False
404 figure PORTAGE_TMPDIR properly
405
406 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
407 src/net/server/html/*:
408 converted showclients, load/saveprofile
409
410 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
411 src/GLIPortage.py:
412 exclude packages already in chroot vdb from binary deplist
413 chroot to use best_version for chroot's vdb
414 src/runtimedeps.py:
415 accept ROOT via commandline instead of env
416
417 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
418 src/runtimedeps.py:
419 remove passing of ROOT
420 src/GLIPortage.py:
421 modify get_deps() to get deptree for each package and merge into final list
422 remove depgraph class
423 add debugging code to get_deps()
424 src/GLIArchitectureTemplate.py:
425 combine code for GRP/compile in install_packages() into one block
426 debugging code in install_packages()
427
428 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
429 src/runtimedeps.py:
430 initial commit
431 src/GLIPortage.py:
432 use separate script for GRP deps
433 remove calls to portage module
434
435 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
436 src/GLIPortage.py:
437 initial commit
438 move some of portage function from GLIAT
439 flipped around a few function args
440 src/GLIArchitectureTemplate.py:
441 revamp install_packages() for new GLIPortage
442
443 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 src/GLIArchitectureTemplate.py:
445 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
446
447 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
448 src/net/server/gliserv.py:
449 wrap generated code in a class to isolate it a bit better
450 302 redirects work
451 don't use cgi.escape() for <% %>
452 src/net/server/html/webgli/*:
453 load/save profile
454 src/GLIUtility.py:
455 change /sbin/lspci to just lspci
456
457 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
458 src/GLIClientController.py:
459 change ordering of statements in CC run() while loop to not go past the end
460 of the array
461 src/GLIArchitectureTemplate.py:
462 removed redundant bind mounts
463
464 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
465 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
466 added a diagram by blackace from last night.
467 added the glossary in RTF format.
468
469 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
470 x86AT: separated out emerge/configure from running of bootloader
471 added MBR drive support to lilo.
472 these changes will likely not work.
473 AT: added setup_and_run_bootloader step.
474
475 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
476 src/net/server/gliserv.py:
477 call generated code in a function
478 src/net/server/html/webgli/*:
479 include top/bottom
480 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
481 src/GLIClientCongifuration.py:
482 install mode magic
483
484 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
485 src/GLIClientController.py:
486 use GLIException when there's an import problem
487 added debug code to show install_steps
488 src/templates/amd64ArchitectureTemplate.py:
489 add . to import path
490 proper path this time: ../../templates
491 src/GLIArchitectureTemplate.py:
492 add _portage_best_version() function
493
494 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
495 added initial glossary and gimli diagram to the docs directory.
496 modify gli-dialog to allow editing of the install_profile after loading XML.
497
498 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
499 src/net/server/html/webgli/:
500 converted globaluse, localuse, networkmounts, portagetree, and stageselection
501 moved saveclientconfig stuff into clientconfig
502 moved saveconfigfiles into config files
503 converted etc_portage and makedotconf
504 converted bootloader and kernel
505 convert daemons, extrapackages, networking, review, services, timezone, users
506 src/net/server/gliserv.py:
507 proper 404 handling for .pyhtml extension
508 HTML escape <% %> stuff
509 work around python's sucky regexes
510 src/GLIInstallProfile.py:
511 allow set_{rsync,ftp,http}_proxy() to accept empty values
512
513 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
514 src/net/server/gliserv.py:
515 initial commit of Legolas templating engine
516 302 redirects
517 src/net/server/html/index.html, src/net/server/webgli_template.html:
518 minor changes for new code
519 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
520 initial commit of the conversion from the monolithic WebGLIHandler.py to the
521 one file per path Legolas goodness
522 partitioning[2-4] done
523
524 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
525 webgli: dhcp options in CC and post-install.
526 updated comparison chart.
527 webgli: etc/portage/* and distcc support added. not too-well tested.
528
529 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
530 webgli_template.html: valign=top on left side.
531 webgli: fix bootloader boot_device. now working.
532 webgli: CC proxy done. post-install proxy in progress.
533
534 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
535 src/net/server/webgli_template.html:
536 increase padding for content cell to 7px and add colspan=2
537
538 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
539 webgli: added graphic bar on top
540 webgli: added hover effects on the links on the left
541 webgli: re-rendered header_bg.png to stretch without artifacts
542
543 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
544 webgli: make.conf disabling fixes for dynamic_stage3
545 fixed portage snapshot browse popup
546 all changes tested.
547 webgli: add debug mode to CC screen. the screen still needs lots of work.
548
549 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
550 added debug mode question to gli-dialog
551 added CC proxies to CC networking for gli-dialog
552 webgli: fixed skip CC networking if connection active
553 webgli: portage snapshot defaults to CD
554 webgli: bootloader mbr drive selection
555 webgli: USE flags unselectable if dynamic_stage3
556 webgli: manual extra packages and save button.
557
558 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
559 src/GLIUtility.py:
560 change ping count to 2
561 docs/comparison.html
562 initial commit
563
564 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
565 src/templates/x86ArchitectureTemplate.py:
566 fix map() issue with grub code
567 replace kernel_names and initrd_names loops with one-liners
568
569 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
570 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
571 initial gli-dialog support for recommended partitioning layout and clear.
572 failure cleanup now an option for gli-dialog.
573 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
574 added comparison list and updated TODO!
575
576 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/GLIArchitectureTemplate.py:
578 fix to stage1() debug code
579 fix to stage2() debug code
580
581 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
582 some more bootloader code fixes. forgot boot_device != mbr_device.
583
584 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
585 src/GLIStorageDevice.py:
586 fix to unallocated space merging when last one is after part 4
587
588 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
589 src/GLIArchitectureTemplate.py:
590 small fix to debugging code in copy_pkg_to_chroot()
591
592 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
593 more bugfixes with bootloader code
594 gli-dialog side appears to work
595
596 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
597 initial adding of boot_device to backend.
598 initial boot_device support added to gli-dialog.
599 some fixes of my poor coding
600
601 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
602 converted gli-dialog to use the install_package_list.
603 gtkfe has already been converted by AllanonJL
604 new way working in gli-dialog now and added to webgli.
605 added set/get_boot_device() to IP
606
607 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
608 get_install_package_list added to InstallProfile. This can be used by the FEs
609
610 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/templates/x86ArchitectureTemplate.py:
612 call ls with '-1 --color=no'
613
614 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
615 added warning (#9) to GRP ppl about stage3 tarballs
616
617 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
618 src/GLIArchitectureTemplate.py:
619 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
620 confused
621
622 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
623 removed protocols from rc.conf screens
624 finished initial rc.conf and make.conf in webgli
625
626 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
627 src/net/server/gliserv.py:
628 add -h option to usage()
629 show time and request URI in debug mode
630 show client IP in debug mode
631 just use IP instead of trying to do a reverse lookup
632
633 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
634 src/net/server/gliserv.py:
635 'classier' 401 message
636 proper commandline parsing
637 help via -h
638 user/pass can be specificed via commandline option
639
640 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
641 src/net/server/gliserv.py:
642 basic HTTP auth
643
644 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
645 src/net/server/gliserv.py:
646 dynamic module reloading (yipee!)
647 send 'Last-Modified' header for real files
648 respond to HEAD with just headers
649 src/net/server/handlers/WebGLIHandler.py:
650 icons for drives
651
652 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
653 src/net/server/handlers/WebGLIHandler.py:
654 initial 'pretty' partition table display support
655 clicking partition in 'pretty' display works instead of radio buttons
656 radio buttons and pretty display work together
657 META redirect instead of javascript
658 pretty display stretches across entire screen
659 'Recommended layout' and 'Clear drive' functions
660 properly catch exceptions from do_recommended()
661 src/GLIArchitectureTemplate.py:
662 replace preinst, copy, postinst, rm steps with qmerge
663 whoops...that shouldn't have been commented out
664 create image_dir with -p in copy_pkg_to_chroot()
665 more generic of symlink crappiness
666 new copy_pkg_to_chroot() actually works now
667
668 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
669 src/GLIStorageDevice.py:
670 initial generic disk support
671 fixes for add_partition() code
672 src/net/server/handlers/WebGLIHandler.py:
673 added support for creating generic disks
674 add new partition working
675 save and delete partitions
676
677 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
678 webgli: Partitioning making progress.
679
680 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
681 src/GLIArchitectureTemplate.py:
682 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
683 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
684 dir) and works around /etc/gconf symlink problem
685
686 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
687 webgli: lots of updates. preliminary partitioning. extra packages works.
688
689 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
690 src/net/server/gliserv.py:
691 httpd now supports HTTPS and falls back to HTTP if not available
692 make fallback actually work
693 src/net/server/SecureXMLRPCServer.py:
694 SecureSocketServer is now threaded
695
696 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
697 src/net/client/gliclient.py:
698 try to use HTTPS for XMLRPC first and fallback to HTTP
699 pretend mode
700 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
701 HTTPS XMLRPC goodness from samyron
702 pass name of certificate
703
704 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
705 wegli: daemons and services screens done.
706
707 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
708 webgli: networking and users screens
709 added return_redirect to handler.py
710 loading and saving install/client profiles works for webgli now
711 Review also done
712
713 *GLI-0.2 (27 Oct 2005)
714
715 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
716 src/templates/x86ArchitectureTemplate.py:
717 properly check for bootloader emerge exist status with exitsuccess()
718 log output of grub install command
719 add --batch --no-floppy to grub command
720 grubinstallstring only gets logged if debug is on
721 src/GLIUtility.py:
722 update progress bar to 100% when process finishes
723
724 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
725 src/GLIClientController.py:
726 added debugging code for the interaction between the 2 threads via Event()
727 src/GLIUtility.py:
728 doubled the buffer size in spawn()
729 bump buffer size up to 16384
730 only report progress in 5% increments
731 src/GLIArchitectureTemplate.py:
732 kernelpkgs.txt support code
733 above disabled because it sucks
734 added add_pkg_to_world()
735
736 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
737 src/GLIArchitectureTemplate.py:
738 use tar | tar to copy files in copy_pkg_to_chroot()
739 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
740
741 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
742 DEBUGGING ADDED TO AT. verbose field added to CConfig.
743
744 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
745 src/net/server/gliserv.py:
746 / maps to index.html
747 look for actual files in html/
748 src/net/html:
749 new template
750 src/GLIUtility.py:
751 added parse_vdb_contents()
752 src/GLIArchitectureTemplate.py:
753 added copy_pkg_to_chroot()
754 added debug code to dynamic-stage3
755 switch dynamic-stage3 to new method
756 lots of bug fixes from adding debug code
757
758 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
759 webgli initial bootloader support + changed make.conf.
760 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
761
762 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
763 src/GLIUtility.py:
764 horrible tangled mess of code that is tarball unpacking subprogress display
765 add unpack progress to portage snapshot
766 use read() instead of readlines() in spawn()
767 only update progress bar for whole percents
768
769 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
770 src/templates/x86ArchitectureTemplate.py:
771 change call to 'grub' to use GLIUtility.exitsuccess()
772 add definition of 'build_mode' in _configure_lilo()
773 src/misc/updategtkfe, src/misc/updateglid:
774 fix so subshell is called in root shell
775
776 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
777 src/net/server/handlers/WebGLIHandler.py:
778 stage screen launches URI browser in sized window with various properties set
779
780 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/misc/updategtkfe:
782 updated to actually work
783 remove previous snapshot and extracted dir before downloading
784 src/misc/updateglid:
785 updated to actually work
786 src/templates/x86ArchitectureTemplate.py:
787 fixed bug where grub code was looking for 'root+root+file_name2'
788
789 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
790 src/net/server/handlers/WebGLIHandler.py:
791 URI browser
792 added mirror selection
793 src/GLIUtility.py:
794 ls via ssh strips off ending *
795
796 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
797 more updates to webgli. stage selection.
798
799 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
800 updated webgli with preliminary Network Mounts support.
801
802 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
803 GenDialog: string formatting and yes/no label fixes.
804 added WebGLI template for gliserv.py
805 added WebGLIHandler as well as a definition for it in gliserv.py
806 updates to the webgli files even though they won't be there for long.
807 Utility: remove exception for non-existant grppkgs.txt until the new livecd
808 goes public.
809
810 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
811 src/net/server/gliserv.py:
812 override dict to not be so anal
813 main server now loads separate module to handle requests
814 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
815 split out profile URLs into separate handler function
816 move handlers into subdirectory
817 add Welcome and Clients handlers
818
819 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
820 src/GLIUtility.py:
821 raise exception if password prompt received twice
822
823 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
824 src/GLIUtility.py:
825 removed rot13ify()
826
827 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
828 src/net/server/gliserv.py:
829 allow for param to be passed multiple times in GET
830 no XMLRPC functions return None
831 modify POST request parsing to only create a list if needed
832 fix GET request parsing so the list creation for multiple values works
833 src/net/client/gliclient.py:
834 various typo and type mismatch fixes
835 exit after exception
836
837 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
838 src/net/client/gliclient.py:
839 initial commit
840 pass MAC to XMLRPC functions
841 src/net/server/GLIServerProfile.py:
842 rename GLIClientsProfiles to GLIServerProfile
843
844 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
845 src/net/server/gliserv.py:
846 now handles POST requests
847 move majority of request handling code to common_handler() to reduce code
848 duplication
849 profile loading
850 client reg via XMLRPC goes into SharedInfo()
851 /showclients redesign
852 template fixes
853 allow handler functions to add/change headers
854 save profile
855
856 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
857 src/net/server/GLIClientsProfiles.py:
858 initial commit
859 src/net/server/template.html:
860 initial commit
861 src/net/server/gliserv.py:
862 add template mojo
863
864 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
865 src/net/server/gliserv.py:
866 XMLRPC mojo
867
868 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
869 src/GLIArchitectureTemplate.py:
870 add code in _edit_config() to comment line where variable is defined
871 previously
872 insert new line under previous definition of variable if it exists
873 small _edit_config() cleanup
874 src/GLIStorageDevice.py:
875 add clear_partitions() function
876 new sizes for recommended partition layout
877 automatically calculate swap size for recommended layout
878
879 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
880 src/templates/x86ArchitectureTemplate.py:
881 fat16 mojo
882
883 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
884 src/GLIStorageDevice.py:
885 prevent do_recommended() from being run twice
886 rewrite do_recommended() to be more robust
887 src/GLIArchitectureTemplate.py:
888 rework _edit_config() to not write duplicate entries
889
890 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
891 src/GLIStorageDevice.py:
892 added do_recommended() function to automatically created 256M/1G/* layout
893
894 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
895 src/gli-dialog.py: added set_distcc to the list
896 GenDialog: added set_distcc. untested.
897 IP: added install_distcc flag.
898 AT: added install_distcc function based on the flag. runs after build_kernel
899 changed AT spawn command for distcc for nodeps.
900
901 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
902 src/GLIUtility.py:
903 add rot13ify() function
904
905 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
906 src/GenDialog.py:
907 added a sentence of text. unchecking support added.
908
909 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
910 src/GLIUtility.py:
911 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
912 src/GenDialog.py:
913 still working on extra_packages. transformed the list to new format.
914 added GRP indication to list. untested.
915 TODO lists updated.
916 src/fe/dialog/gli-dialog.py:
917 spelling mistook.
918
919 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/GLIUtility.py:
921 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
922
923 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/GLIUtility.py:
925 add get_directory_listing_from_uri()
926 add http support to above
927 add ftp support to above
928 add scp support to above
929 src/GLIArchitectureTemplate.py:
930 "0" instead of 0 for key of single-element dict passed to _edit_config()
931
932 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
933 value_only -> only_value
934
935 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
936 gutted out all of etc_portage structure since it is now all handled by
937 etc_files
938
939 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/GLIArchitectureTemplate.py:
941 install_packages() sends progress update notifications
942 src/templates/x86ArchitectureTemplate.py:
943 increase sleep to 5s between format tries
944 src/GLIClientController.py:
945 pass 'self' to AT instead of 'self._pretend'
946
947 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
948 logger -> logger.log in x86AT
949
950 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
951 added set_etc_portage to IP. debugging gli-d's support for it.
952
953 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
954 src/templates/x86ArchitectureTemplate.py:
955 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
956
957 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
958 src/GLIArchitectureTemplate.py:
959 add _portage_best_version() function and rework install_packages() to allow
960 for future X of Y tracking
961 Use best_visible instead of best_version
962 tracked down and fixed missing = causing empty install extra packages
963 use = when emerging also
964 quickpkg hokey pokey
965 run _get_packages_to_emerge() again with -pk
966
967 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
968 src/ArchTemplate:
969 removed install_xorg_x11, and put the xorg.conf copying at
970 the end of install_packages.
971 added updateglid to /src/misc
972 updated all core files with new GPL notice and copyright statement.
973
974 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
975 src/GLIUtility.py:
976 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
977 a snapshot in /mnt/cdrom/snapshots/
978 get_snapshot_from_cd() adds file:// at the beginning
979 change calls to extra package special case functions to 'self.blah'
980
981 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
982 src/ArchTemplate: changed "voodoo".
983 changed order of portage sync methods. made a fallback to webrsync if
984 normal emerge sync fails.
985 removed get_sources_from_cd because it is obsolete.
986 add special cases to install_packages. remove fatal exception on package
987 install failure b/c the box will still be bootable.
988 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
989 handled in the FEs.
990 src/GenDialog: added a bunch of code for dealing with x11-based packages.
991 awaiting testing.
992
993 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
994 src/GLIStorageDevice.py:
995 global try/except block around fs resizable detection code
996 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
997 install-failed cleanup function
998
999 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1000 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1001
1002 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1003 GLIGenDialog:
1004 add drive choices for loaded configs.
1005 force snapshot for dynamic_stage3
1006 init the snapshoturi input to the cd snapshot if not already selected.
1007 if dynamic_stage3, skip the make.conf step.
1008 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1009 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1010
1011 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1012 src/GLIArchitectureTemplate.py:
1013 manually call MAKEDEV in stage3-dynamic code
1014 copy /etc/inittab.old to /etc/inittab in chroot
1015 src/GLIUtility.py:
1016 add beginning of validate_uri() function
1017 add file:/// support to validate_uri()
1018 single quotes when setting livecd password
1019
1020 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1021 src/GLIGenDialog.py:
1022 change getmountpoint() to get_mountpoint()
1023 src/misc/updategtkfe:
1024 committed script to automatically download latest snapshot and run gtkfe
1025 src/templates/x86ArchitectureTemplate.py:
1026 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1027 src/GLIArchitectureTemplate.py:
1028 give tmp_minor an initial value in mount_local_partitions so that the value
1029 remain from the previous drive
1030
1031 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1032 src/templates/x86ArchitectureTemplate.py:
1033 Fix _configure_lilo() for IP using GLISD stuff
1034 src/GLIArchitectureTemplate.py:
1035 install_cron_daemon() treats "none" specially
1036
1037 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1038 old patch from Steven Mertens to resolve bug #96642
1039 numerous asthetic changes to GenDialog, no real functionality changes though.
1040 strings renamed for global use if necessary.
1041 fix all three parts of bug 102291
1042 disable set_etc_portage until fully-written.
1043
1044 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1045 src/GLIClientController.py:
1046 lower-case http/ftp proxy envvars
1047
1048 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1049 src/GLIClientController.py:
1050 log end of pre_install steps to aid in debugging
1051 src/templates/x86ArchitectureTemplate.py:
1052 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1053
1054 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1055 src/GLIArchitectureTemplate.py:
1056 check to make sure that the device node we're wait for to exist isn't of
1057 type 'free'
1058
1059 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1060 src/GLIGenDialog.py:
1061 convert install_packages to list in set_extra_packages()
1062 check return code of checklist() call in "Manual" section
1063 *actually* fix the first problem
1064
1065 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1066 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1067 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1068
1069 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1070 src/GLIArchitectureTemplate.py:
1071 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1072
1073 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1074 Add CDATA support to SimpleXMLParser and add utility functions for it.
1075
1076 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1077 src/GLIArchitectureTemplate.py:
1078 Fix case where vixie-cron is specified as a full package atom, as we still
1079 don't want to run 'crontab /etc/crontab' for it.
1080
1081 *GLI-0.1 (3 Aug 2005)
1082
1083 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1084 add scp to list of is_uri() so GenDialog doesn't complain.
1085 fixed livecd-kernel bug in bootloader code.
1086 fixed gendialog for dynamic_stage3 instead of "networkless"
1087 change bootloader to allow for both initrd and initramfs.
1088 fix IP for dynamic_stage3.
1089 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1090
1091 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1092 Added full scp:// URI support to get_uri() in GLIUtility
1093 Remove "networkless" from dynamic stage3 if locic.
1094 Remove print statement from scp:// code.
1095 Change scp code to check for "assword: " instead of "Password:"
1096 Fix post-install network code to create net.eth1+ symlink correctly
1097 Check to make sure pkg can be split on / and some debugging code
1098 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1099 SimpleXMLParser handles True/False/None correctly now
1100 Comment out above fix
1101 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1102
1103 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1104 Removed a FIXME in the GLIClientConfiguration that is no
1105 longer needed.
1106
1107 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1108 Default to x86 in ClientConfig
1109 Typo in build-a-stage3 code.
1110 Remove MAKEDEV call in build-a-stage3 postscript.
1111
1112 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1113 Rewrote init of IP for gli-d. Other GenDialog updates.
1114 allow network_type to be None in CConfig.
1115
1116 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1117 Add _dynamic_stage3 option to IP.
1118 Add check for that option to dynamic stage3 code in ArchTemplate.
1119 Fix code to determine default route in get_eth_info() in GLIUtility.
1120 Fix serialization of dns-servers in ClientConfig.
1121
1122 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1123 changed default values of cron/logger in IP.
1124 moved GenDialog IP init out to the individual files. gli-dialog's version
1125 will change quite a bit.
1126
1127 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1128 added ppcArchTemplate. blank now. working on yaboot.
1129 modified ArchTemplate for amd64 and ppc custom kernels.
1130 skeleton implementation of _configure_yaboot.
1131 small fixes to other templates.
1132
1133 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1134 GenDialog updates. changed comment in IP.
1135
1136 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1137 src/GLIInstallProfile.py:
1138 Fix codeman's screwup of changing the service seperator to ',' in the parser
1139 without changing it in the serialization code! Also document this in a
1140 comment so you find it easier. Everybody needs to make sure they update
1141 their install profiles!
1142
1143 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1144 src/GLIArchitectureTemplate.py:
1145 Fix casting of list to string and concat of None with string, as well as
1146 commented prototype of checking that mounting actually worked (found a case
1147 where mount can return success, but the mount won't be done).
1148
1149 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1150 src/templates/x86ArchitectureTemplate.py:
1151 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1152 checking for the device, and sleeping 1 second each time.
1153
1154 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1155 src/templates/x86ArchitectureTemplate.py:
1156 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1157 bootloader works again. Also rename _install_{grub,lilo} to
1158 _configure_{grub,lilo} since they don't install the loaders anymore
1159 themselves.
1160
1161 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1162 fix global USE flags to not include the arch types at the end.
1163 updates to GenDialog and gli-d.
1164
1165 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1166 fixing bootloader code for no initrd and initrd->initramfs naming change.
1167
1168 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1169 Proper comments and parameters to GLIException in install_mta()
1170 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1171 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1172 list_tarball_from_mirror() to eliminate blank last item.
1173
1174 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1175 Added stage3 generation code.
1176
1177 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1178 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1179 Mild changes to GenDialog.
1180
1181 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1182 Remove separate install step configure_rc_conf() since it's handled by
1183 update_config_files()
1184 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1185 function is called twice on the same file.
1186
1187 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1188 Missing \ in sed in _get_packages_to_emerge()
1189 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1190 Check in _quickpkg_deps() to ignore blank package names returned from
1191 _get_packages_to_emerge()
1192
1193 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1194 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1195 in the dialog.py gauge code.
1196
1197 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1198 Add code to update_config_files() to go through etc_files and update stuff.
1199 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1200 Only use float() in partition xml parsing code if type == "free"
1201
1202 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1203 finished almost all internationalization of GenDialog.
1204 attempt at fixing rc.conf function. moved 3 generate functions out of
1205 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1206 added dialog.py to the fe/dialog directory so it actually gets used.
1207
1208 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1209 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1210
1211 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 fix extra entry in list_mirrors()
1213 beginning internationalization runthrough.
1214
1215 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1216 added dialog.py to /src temporarily until it gets accepted upstream.
1217 fix for unused value in form in dialog.py and changed heights.
1218 fix GenDialog forms.
1219
1220 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1221 Changed hostname/domainname for new baselayout.
1222 Changed _add_to_runlevel errors to logs.
1223 Updated TODO list to show status of GenDialog
1224 More updates to GenDialog including two checklists that probably won't work.
1225 update IP to use comma-separated list instead of space separated for services.
1226
1227 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1228 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1229 GenDialog as it gets closer to completion.
1230
1231 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1232 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1233 instead of int() in add_partition_device_partition() for minor (closes 96804)
1234
1235 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1236 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1237 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1238 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1239
1240 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1241 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1242 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1243 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1244 Fix undefined variable 'output' issue in spawn().
1245
1246 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1247 More updates to GenDialog and gli-d.
1248
1249 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1250 Modify list_mirrors() to return a list of mirror URL/name pairs.
1251
1252 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1253 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1254 get subarch.
1255
1256 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1257 Backend partitioning will create disklabel is none exists. Installprofile
1258 defaults to "" now instead of "msdos" for disklabel type. Fix for
1259 mount_local_partitions() to remember device along with minor in the
1260 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1261 add else block to log unsupported netmount types to mount_network_shares()
1262
1263 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1264 src/GLIArchitectureTemplate.py:
1265 Refactor kernel_compile common stuff, fix 2.4 build process.
1266 src/fe/cli/clife.py:
1267 Logging system.
1268 src/GLIUtility.py, src/GLIStorageDevice.py:
1269 Add comments about re-writes needed for boxes without sysfs.
1270
1271 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1272 src/GLIArchitectureTemplate.py:
1273 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1274 'make dep' call for custom compile. build_mode support for prepare-only and
1275 none types completed. custom compile function chains shell functions in
1276 spawned script, to allow for catching all errors.
1277
1278 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1279 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1280 and GenDialog. other gendialog updates as well. kernel updates untested.
1281
1282 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1283 src/GLIInstallProfile.py:
1284 Change structure of etc-portage stuff. The serialization was broken before my
1285 last commit, and I am the only person that's ever used it. The new schema is
1286 as follows:
1287 <etc-portage>
1288 <file name="package.mask"/>
1289 <file name="package.unmask">
1290 <entry atom="sys-kernel/openmosix-sources"/>
1291 </file>
1292 <file name="package.use">
1293 <entry atom="sys-libs/db">
1294 -java
1295 </entry>
1296 <entry atom="dev-libs/cyrus-sasl">
1297 -ldap
1298 </entry>
1299 </file>
1300 </etc-portage>
1301
1302
1303 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1304 src/GLIInstallProfile.py:
1305 Add new entry for gli-profile/kernel-build-method item. Add missing
1306 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1307 keys in the same order.
1308
1309 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1310 src/GLIArchitectureTemplate.py:
1311 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1312 was repeatedly appended to make.conf.
1313
1314 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1315 src/GLIArchitectureTemplate.py:
1316 Put some Linux-2.6 specific code under a if statement. Store list of
1317 successfully mounted swap device for using swapoff. Add proper error checking
1318 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1319 'file'. Clean up some redundant code (thanks to pychecker).'
1320
1321 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1322 Fix typos: get_extended() instead of get_extended_partition(). Added
1323 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1324 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1325
1326 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1327 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1328 in add_network_interface.
1329
1330 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1331 src/GLIArchitectureTemplate.py:
1332 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1333 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1334 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1335 prepare_chroot.
1336
1337 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1338 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1339 +src/fe/installer-gtk:
1340 Add new automated CLI frontend. Add scripts that are the intended means to
1341 use each frontend.
1342
1343 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1344 src/GLIClientController.py:
1345 Add null type to network config, for cases where the interface is already up
1346 and should not be touched (netboot for example).
1347
1348 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1349 src/GLIArchitectureTemplate.py:
1350 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1351 string!. Try to use binary packages if available by default.
1352
1353 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1354 src/GLIArchitectureTemplate.py:
1355 More error checking for _add_to_runlevel, to ensure that the init script
1356 actually exists before we try to add it. set_services phase must take place
1357 after the package installation, otherwise the init scripts might not exist.
1358 Find the correct init script for the cron and logging daemons, and add that
1359 instead of the package atom.
1360
1361 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1362 src/GLIArchitectureTemplate.py:
1363 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1364 usage of 'file' to 'contents' for the variable name, as it shadows
1365 __builtin__.file.
1366
1367 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1368 src/GLIArchitectureTemplate.py:
1369 Add MTA install code, and include MTA install phase. Ensure
1370 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1371 for 'none' kernel config for build_kernel phase. Put kernel_script in
1372 /var/tmp instead of /root for build_kernel phase.
1373
1374 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1375 Rename mta variables to match syslog/cron variables.
1376
1377 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1378 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1379 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1380 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1381 src/templates/.cvsignore, src/tests/.cvsignore:
1382 Refactor partition formatting again to include error checking. Allow 'none'
1383 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1384
1385 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1386 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1387 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1388 only have a single spawn call.
1389
1390 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1391 refixed samyron's fix of set_architecture_template.
1392
1393 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1394 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1395 be executable.
1396
1397 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1398 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1399 error checking when you call set_architecture_template.
1400
1401 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1402 moved the mkfsopts input to the partition options menu instead of the during
1403 the creation process. updated GenDialog to say it supports reiserfs v3.
1404
1405 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1406 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1407 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1408 Add support for other partition types to dialogfe.
1409 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1410 avoid integer overflows and wraparounds.
1411
1412 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1413 Removed start/end from XML output and added mkfsopts to partitioning info.
1414 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1415 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1416 in GLIClientConfiguration. Change from .1 and .9 to constants for
1417 partitioning. Fix free space overwriting bug. Remove a few unused functions
1418 from rewrite. Fix call to get_partition_at()
1419
1420 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1421 Updates to GenDialog and dialogfe.
1422
1423 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1424 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1425
1426 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1427 more GenDialog updates to partitioning.
1428
1429 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1430 Indenting issue in GLISD/get_ordered_partition_list.
1431 updates to GenDialog partitioning and added default UTC for timezone in IP.
1432
1433 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1434 Added GLISD.get_model()
1435
1436 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1437 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1438 More updates to GenDialog :)
1439
1440 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1441 Added get_interface_realname() function.
1442
1443 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1444 Added auto-save of CConfig and copying to new /root after install.
1445 yet even more GenDialog updates.
1446
1447 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1448 removed print statement from GLISD. more updates to GenDialog.
1449
1450 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1451 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1452 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1453 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1454 places in GLIClientConfiguration.
1455
1456 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1457 Fix mount_local_partitions(), configure_fstab(), and
1458 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1459 A few more fixes for templates/x86Archtemplate
1460
1461 27 May 2005; Preston Cody <codeman@gentoo.org> :
1462 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1463 a work in progress.
1464
1465 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1466 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1467 directly. GLISD can now handle data imported from XML.
1468
1469 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1470 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1471 handle blank (no disklabel) disks.
1472
1473 20 May 2005; Preston Cody <codeman@gentoo.org> :
1474 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1475 up, documented, and separated out serialization and grouped all sections.
1476
1477 19 May 2005; Preston Cody <codeman@gentoo.org> :
1478 Reorganization of ClientConfiguration and gutting of unused functions.
1479 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1480
1481 18 May 2005; Preston Cody <codeman@gentoo.org> :
1482 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1483
1484 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1485 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1486 partitioning. CC serializes install profile to disk and prepare_chroot()
1487 copies it into /mnt/gentoo/root
1488
1489 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1490 Moved URI parsing into new function parse_uri()
1491
1492 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1493 Added XMLParser module.
1494
1495 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1496 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1497 Minor fix to is_uri() regex to allow hyphens in hostname.
1498
1499 12 May 2005; Preston Cody <codeman@gentoo.org> :
1500 Updated finishing_cleanup for new unmounting method from agaffney.
1501
1502 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1503 Fix GLILogger to use correct time format string. Fix _edit_config() to
1504 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1505 unicode support to is_realstring().
1506
1507 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1508 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1509 return value instead of non-zero. Add code to output a traceback to the
1510 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1511 instead of --nocolor.
1512
1513 10 May 2005; Preston Cody <codeman@gentoo.org> :
1514 Added GLIGenDialog.py to make a generic class for the dialog functions that
1515 can be used by both dialogfe and the netfe/be. updated both for new filename.
1516 date changes. 2004->2005.
1517
1518 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1519 Removed 'quiet=True' from spawn() calls
1520
1521 10 May 2005; Preston Cody <codeman@gentoo.org> :
1522 Updated GLIUtility with patches from chotchki. Also added documentation
1523
1524 9 May 2005; Preston Cody <codeman@gentoo.org> :
1525 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1526 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1527 from bug #89683, mostly touchups.
1528
1529 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1530 GLIStorageDevice cleanup patch from bug #91761
1531
1532 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1533 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1534 _edit_config(). Error logging casts 'error' to str
1535
1536 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 Exceptions received in CC are logged before being passed to the FE. Added
1538 code to CC to handle exceptions *not* thrown by the installer itself.
1539
1540 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 get_max_mb_for_resize() returns -1 if not self.resizeable
1542
1543 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1544 More dirty rsync hacks :-/
1545
1546 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1547 Patches from chotchki (bug #90325) to improve CC networking. untested.
1548
1549 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1550 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1551 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1552 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1553 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1554 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1555 _get_packages_to_emerge()
1556
1557 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1558 Added group-adding code to set_users in ArchTemplate
1559
1560 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1561 Added post-install script code
1562
1563 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1564 Fixed encapsulation issues in GLIClientController (bug #90141)
1565
1566 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1567 Update resizing code in GLIStorageDevice
1568
1569 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1570 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1571
1572 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1573 Reverted change to ArchTemplate and added support for commented line in old
1574 code.
1575
1576 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1577 Changed _edit_config() to modify value in-place instead of commenting out and
1578 adding the new value to the end of the file.
1579
1580 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1581 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1582 Also updated TODO list.
1583
1584 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1585 Use blackace's one-liner to add comments for all function for use with
1586 pythondoc.
1587
1588 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Moved 'end >= device_sectors' check out of loop to check for next partition's
1590 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1591 Partitioning code now tracks start/end of extended for placing logicals. End
1592 point of logical is now adjusted along with start.
1593
1594 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1595 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1596 the way of partitioning from a blank disk. Add int() around access to minor
1597 key in partition information due to new partition code leaving them as float.
1598
1599 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1600 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1601
1602 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1603 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1604
1605 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1606 Added support for DHCP options and MAC addresses in the InstallProfile.
1607
1608 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1609 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1610 sed to properly strip out junk.
1611
1612 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1613 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1614 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1615
1616 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1617 Fixed indent problem in GLICController
1618
1619 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1620 Check for disklabel type "loop" and use the device name without a minor.
1621
1622 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1623 Remove /tmp/compile_output.log and /var/log/install.log when install is
1624 complete. Added code to (hopefully) keep 2nd thread running after install.
1625 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1626 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1627 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1628
1629 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1630 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1631 when unpacking tarball.
1632
1633 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1634 rewrote filesystem_tools. looks like it works so ripping out all the old
1635 filesystem_tools code.
1636
1637 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1638 Changed the print statements to logging in the partitioning BE code.
1639 the logger may need to be imported to the x86archtemplate. unknown yet.
1640 Added the finishing_cleanup function.
1641 added a fix to the logger from BenUrban
1642
1643 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1644 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1645 URIs. The blank uri check has been commented out.
1646 ripped out error checking of set_services. this is done by _add_to_runlevel.
1647
1648 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1649 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1650
1651 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1652 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1653 the install profile if available. Commented out spawn() debugging prints
1654
1655 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1656 small changes to setup_network_post. moved adding to runlevel of net.x to
1657 after the device gets symlinked. added domainname runlevel command.
1658
1659 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1660 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1661 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1662 spawn() call in livecd-kernel code to pass environment variables.
1663 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1664 the install profile if available.
1665
1666 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1667 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1668 to handle installing the livecd kernel into the new system.
1669
1670 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1671 should emerge hotplug and coldplug before adding them to runlevel.
1672
1673 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1674 took chroot out of grub_install command.
1675
1676 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1677 Changed chroot wrapper code in spawn() to write the wrapper the python way
1678 instead of the bash way to avoid quote conflicts. Added
1679 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1680 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1681 as it breaks the piping.
1682
1683 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1684 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1685
1686 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1687 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1688 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1689 GLIInstallProfile.
1690
1691 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1692 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1693 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1694 into /mnt/gentoo in prepare_chroot()
1695
1696 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1697 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1698 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1699 to start/end sectors
1700
1701 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1702 Add 2>&1 to cmd in spawn()
1703
1704 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1705 Modified GLIUtility.exitsuccess() to work with return value from
1706 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1707 creates wrapper script for commands run inside chroot so multiple commands
1708 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1709 for the generated script from spawn()
1710
1711 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1712 Removed default values for stage tarball URI and portage tree URI from
1713 InstallProfile. These should be set by the FEs. also added services step to
1714 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1715 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1716
1717 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1718 Small fix for setting the default gateway. Also added feature to dialogfe.
1719
1720 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1721 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1722
1723 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1724 Fixed a bunch of true -> True typos. lots of em
1725 only write new resolv.conf if there are dns servers listed.
1726
1727 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1728 Commented out 'display_on_tty8=True' in start_portmap()
1729
1730 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1731 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1732
1733 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1734 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1735 lang parameter to __init__()
1736
1737 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1738 updates to TODO list.
1739
1740 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1741 Initial code for quickpkg GRP support. Fix loop to grab packages from
1742 'emerge -p blah'
1743
1744 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1745 check for dhcp in the network stuff and emerge it if it is.
1746 added quickpkg to TODO list
1747
1748 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1749 Changed the raising of 'warning' exceptions to a simple log of the error
1750 so that the installer can continue.
1751
1752 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1753 Some big changes. First, changed most output to display_on_tty8.
1754 Second, added log lines to all templates. Some smaller fixes such as typos.
1755 Also did some cleanups of old commented lines.
1756
1757 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1758 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1759 Undo change with fix. Escaping fix in GLIStorageDevice.py
1760
1761 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1762 more updates to TODO list. hopefully we'll soon start removing items instead
1763 of adding them.
1764
1765 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1766 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1767
1768 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1769 updated TODO list. (again)
1770
1771 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1772 changed output of portmap start to display_on_tty8.
1773 fixed bootloader for udev and multiple kernels
1774 fixed custom kernel config (again)
1775
1776 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1777 changed default value of CC._enable_ssh to True because this is smart.
1778 added code to allow custom kernel .config. may be unstable and break. sorry.
1779
1780 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1781 partition() now waits until after it checks for partition flags before delete
1782 the partitions :P
1783
1784 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1785 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1786 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1787 blank.
1788
1789 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1790 Various fixes related to the add_users function. Still not yet finished.
1791 Added things to the TODO list. Lets start using that!
1792
1793 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1794 Added code to x86Template to format newly created partitions. Also added
1795 some error checking code. GLIStorageDevice passes 'minor' with data to
1796 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1797 mounting code.
1798
1799 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1800 Took out unnecessary setting of random livecd root password. the cd already
1801 sets it randomly.
1802
1803 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1804 Took out an unneeded step from CC's run()
1805
1806 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1807 Attempt at detecting and adding windows partitions to lilo.
1808
1809 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1810 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1811 partition. fixed misc exit_status => exitstatus typo.
1812
1813 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1814 Added basic code for resizing filesystems with pyparted. Fixed code for
1815 resizing ntfs and ext2/3.
1816
1817 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1818 Fixed partition() in x86Template so that it scans through logicals and deletes
1819 before deleting containing extended partition. Also clears partition table to
1820 be safe before third pass.
1821
1822 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1823 Added mount_network_shares. not able to test it from this computer.
1824 will test when i get back to school.
1825 also added start_portmap to the client_controller as an always-do.
1826 agaffney says this is needed for NFS mounts to work.
1827
1828 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1829 Partial rewrite of partitioning code in x86Template. No longer shells out to
1830 parted to perform actions, now uses all pyparted calls. Code "works" in a
1831 test, but still needs lots of TLC. Also modified tests/install.py to work
1832 with x86Template and GLIClientConfiguration.
1833
1834 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1835 Initial move of partitioning code from ArchTemplate to x86Template.
1836
1837 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1838 Added grp_install and services to InstallProfile. forgot about the set_root_password
1839
1840 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1841 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1842 agaffney. Test Install ran very well (skipping partitioning).
1843
1844 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1845 My mid-day update. rewrote mount_local_partitions for order of mounting.
1846 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1847 partition format. fixed a few _edit_configs. some may still have eluded me.
1848
1849 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1850 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1851 to test it.
1852 Just finished mount_local_partitions in GLIArchitectureTemplate
1853
1854 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1855 Added get_num_sectors() to GLIStorageDevice.
1856
1857 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1858 GLIStorageDevice now tracks partition boundaries in sectors instead of
1859 cylinders.
1860 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1861 from GLIInstallProfile.
1862
1863 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1864 GLIStorageDevice returns "unknown" instead of "" for get_type()
1865
1866 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1867 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1868 actually work. Commented out resizability checking code for speed.
1869
1870 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1871 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1872 in GLIStorageDevice at the suggestion of plors
1873
1874 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1875 Added a function to GLIUtility to pull a value from a make.conf-style config
1876 file. Minor type fix to GLIInstallProfile.py
1877
1878 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1879 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1880 Separated network mounts from partition data structure in GLIInstallProfile
1881
1882 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1883 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1884 can be resized.
1885
1886 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1887 Added some of the final functions to GLIInstallTemplate.
1888 Yes this project is still active despite rare use of the Changelog!
1889
1890 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1891 Added the GLIPartitionTools.py file. This is a temporary insertion of
1892 partitioning tools that will eventually go into their own package.
1893
1894 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1895 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1896 run-time for the program). Added __init__(install_profile,
1897 client_configuration) to GLI.InstallProfile. This sets install_profile and
1898 client_configuration once so as to avoid constantly passing stuff every time
1899 we call a method.
1900
1901 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1902
1903 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1904 config files without messing up all the other stuff in them. This will be
1905 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1906
1907 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1908
1909 Added GLI.InstallTemplate framework. This is not yet functional. However,
1910 it does have a few basic things. I added two private methods. One is
1911 _depends(). This will be used for dependency checking (ie. unpacking a
1912 tarball requires that partitioning has been done). The other is
1913 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1914 instead of being run in the liveCD environment, it runs in the chroot. This
1915 requires a bit of fork() magic, so I isolated the code. Hope to work more
1916 this week to get this class formed...
1917
1918 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1919 Added SAX parsing. Made GLI.InstallProfile a subclass of
1920 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1921 to be lists instead of tuples to allow for easier modification (mutable,
1922 rather than immutable objects). Updated existing pydoc and added more.
1923 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1924 GLI.py a bit. Fixed all accessors to use self references.
1925 Added initial unit test code.
1926
1927 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1928 Added initial changelog. Setting up the basic structure of the CVS repository
1929 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1930 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20