/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1482 - (show annotations) (download)
Fri Jul 28 20:48:44 2006 UTC (8 years, 1 month ago) by agaffney
File size: 79938 byte(s)
  src/templates/x86ArchitectureTemplate.py:
  move logical clipping logic a bit

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.666 2006/07/28 20:48:44 agaffney Exp $
4
5 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
6 src/templates/x86ArchitectureTemplate.py:
7 move logical clipping logic a bit
8
9 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
10 I've commented out most of the code that used launch. It wasn't working and
11 we don't have the time to fix it before the release. I'll look into it after
12 the release and make it more robust and flexible.
13
14 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/templates/x86ArchitectureTemplate.py:
16 clip logical partition at end of extended
17
18 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
19 src/GLIInstallProfile.py:
20 Added a few more applications to the list of extra packages to be merged,
21 all from various GRP sets.
22
23 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
24 Added launch variable to the end of each try-run with auth, which should
25 cause this to function properly. Of course, more testing is needed.
26
27 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
28 Fix a missed space in the installer script.
29
30 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
31 src/GLIClientController.py:
32 log version-stamp
33
34 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
35 Updated the installer script to allow specifying the front-end to run from
36 the command line. Currently, it only supports dialog and gtk. It still needs
37 some testing, however.
38
39 9 July 2006; Preston Cody <codeman@gentoo.org>
40 src/GLIGenDialog.py:
41 make lilo only show up for x86 if non-networkless
42
43 25 Jun 2006; Preston Cody <codeman@gentoo.org>
44 src/GLIGenDialog.py:
45 adding code to auto-add doscsi if a scsi drive detected.
46 this code is also in the gtkfe already
47
48 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
49 src/GLIPortage.py:
50 pass proper PORTAGE_TMPDIR
51
52 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIUtility.py:
54 fix list_mirrors() to ignore <uri> lines that don't end on the same line
55
56 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
57 Added code to the mta step in AT to parse the install packages list and
58 look for mtas and if it finds it emerge it.
59 Initial attempt at moving extra_packages early in the setup to only show
60 local USE flags relating to those packages.
61 .. abandoned local USE project. no right way to do it.
62
63 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
64 src/GLIUtility.py:
65 minor tweak to regex for parsing mirrors.xml
66
67 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
68 src/templates/x86ArchitectureTemplate.py:
69 make use of strict_start and strict_end in partition recreation
70
71 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/templates/x86ArchitectureTemplate.py:
73 add strict_start and strict_end parameters to _add_partition()
74 add _find_current_minor_for_part() function to help with resizing
75 fix logical/extended logic in _partition_delete_step()
76 in _partition_resize_step(), delete, recreate at new size, resize, delete
77 call resize2fs with no size argument so it fills entire partition
78 more logging
79 only delete, recreate, resize, delete if growing
80 pass new size to resize2fs in K
81
82 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
83 src/GLIStorageDevice.py:
84 call reorder_minors() from tidy_partitions() instead of
85 set_partitions_from_disk()
86 add code to reorder_minors() to take extended/logical into consideration with
87 non-free partitions
88
89 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
90 added a check of the length of the directory in /usr/src if under 6 characters
91 should fix bug 131809
92
93 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
94 src/GLIArchitectureTemplate.py:
95 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
96 and livecd-kernel
97
98 16 Apr 2006; Preston Cody <codeman@gentoo.org>
99 src/GLIGenDialog.py:
100 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
101
102 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
103 src/GLIInstallProfile.py:
104 change kernel-modules to not be so stupid
105
106 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
107 GLIMD: fix display problem with execute.pyhtml.
108 make tables better.
109
110 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIInstallProfile.py:
112 fix handling of int/float for minor
113 src/templates/x86ArchitectureTemplate.py:
114 save/restore partition name
115 src/GLIStorageDevice.py:
116 support for partition name
117
118 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
119 touchups to add_profile in GLIMD to link to webgli
120 add a save to GLIMD profile button in webgli's saveprofile
121 gliserv.py:
122 initial attempt at custom networking info per client. hostname support only.
123
124 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
125 src/net/server/html/webgli/partitioning[234].pyhtml:
126 small fixes for new partioning code
127
128 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
129 src/GLIClientController.py:
130 record PID of secondary thread
131
132 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
133 src/GLIGenDialog.py:
134 small fix for new partitioning code
135
136 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
137 src/GLIStorageDevice.py:
138 add get_devnode()
139 fix up detect_devices() to detect cciss/ida arrays
140 src/templates/x86ArchitectureTemplate.py:
141 use get_devnode() instead of figuring out the devnode
142 skip first 3 steps if partition layout hasn't changed
143 wipe disk and create new disklabel before recreating partitions
144 src/GLIArchitectureTemplate.py:
145 use get_devnode() in local mount and fstab stuff
146
147 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
148 src/GLIStorageDevice.py:
149 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
150
151 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
152 src/templates/x86ArchitectureTemplate.py:
153 continue breakup/cleanup of partitioning code
154
155 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
156 src/GLIStorageDevice.py:
157 set disklabel to default for arch when clearing the partition table
158 src/templates/x86ArchitectureTemplate.py:
159 complete rewrite of first and second passes
160
161 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
163 allow iterating over Device object to get partitions
164
165 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIStorageDevice.py:
167 allow access to Device object like a dict
168
169 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 allow access to Partition object like a dict
172
173 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/templates/x86ArchitectureTemplate.py:
175 fail if any filesystems are mounted on the device being partitioned
176
177 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIStorageDevice.py:
179 reorder minor numbers when loading partitions from disk to match the physical
180 partition order
181
182 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
183 src/GLIStorageDevice.py:
184 overhaul for supporting mac disklabels and partitions out of disk order
185 remove free space from inside extended partition when extended is removed
186
187 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
188 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
189 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
190 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
191 Added bash scripts, icons, and desktop entries from the ebuild to make my
192 life easier.
193
194 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
195 src/GLIStorageDevice.py:
196 raise an exception if the existing partitions are out of disk order
197 look for minors out of order instead of disk position
198
199 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
200 src/fe/dialog/gli-dialog and src/GLIGenDialog:
201 added networkless mode to gli-dialog.
202
203 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
204 src/templates/x86AT:
205 add windows detection code for grub. untested.
206
207 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
208 src/templates/x86ArchitectureTemplate.py:
209 bootloader and partitioning external commands log to compile_output.log
210 wait for device node to exist before resizing
211 add -v to ntfsresize command
212 src/GLIStorageDevice.py:
213 return start/end with ip structure
214 pad min ntfs size by 50 MB just to be safe
215 src/GLIArchitectureTemplate.py:
216 only install filesystem tools for partitions with a mountpoint
217
218 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
219 add error catching and text to saving profile dialogs
220
221 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
222 src/GLIPortage.py:
223 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
224 src/templates/x86ArchitectureTemplate.py:
225 fix checks for changed partitions so they will actually get deleted
226
227 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
228 src/GLIClientController.py:
229 slightly better error handling for pre-install failures
230
231 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
232 src/templates/x86ArchitectureTemplate.py:
233 proper return code checking for ext2/3 resizing
234
235 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
236 src/GLIClientController.py:
237 accept 'none' as well as 'null' for network type
238 src/GLIArchitectureTemplate.py:
239 ignore extended partitions in mount_local_partitions()
240 src/templates/x86ArchitectureTemplate.py:
241 use get_ordered_partition_list() instead of keys().sort() for new_part_list
242 check to make sure start sector for primary isn't less than end sector for
243 previous extended
244 src/GLIClientController.py:
245 write dns servers to /etc/resolv.conf
246
247 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
248 src/GLIPortage.py:
249 copy_pkg_to_chroot() uses compile_output.log for command output
250
251 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
252 only keep a 1000 line 'scrollback' buffer for the compile output and log file
253
254 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
255 src/GLIPortage.py:
256 add code make GLIPortage.py capable of being run stand-along for dynamic
257 stage3 generation and copying packages in a GRP-ish way
258 grp code fixups
259
260 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
261 src/GLIPortage.py:
262 ignore blank packages passed to get_deps() and emerge()
263
264 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
265 src/GLIUtility.py:
266 add get_chosts() function
267
268 *GLI-0.3 (12 Feb 2006)
269
270 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
271 src/templates/x86ArchitectureTemplate.py:
272 pull old start/end sector values from somewhere that actually has them
273 add logic for extended partition to code that makes sure new end sector
274 doesn't overlap start sector of next partitions
275 don't freak out if partition can't be deleted
276
277 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
278 src/GLIPortage.py:
279 run env-update at the end of copy_pkg_to_chroot()
280
281 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
282 src/templates/x86ArchitectureTemplate.py:
283 I'm a complete fscking dumbass. I recorded the end sector for partitions that
284 weren't being touched, but I never used it when recreating them...the end was
285 calculated from the size in MB instead :/
286
287 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
288 src/GLIArchitectureTemplate.py:
289 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
290 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
291 src/GLIPortage.py:
292 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
293 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
294 'resized' flag
295
296 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
297 src/GLIPortage.py:
298 short circuit and check vdb directly if package begins with '='
299
300 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
301 added more packages to extra_packages list in IP
302
303 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
304 src/templates/x86ArchitectureTemplate.py:
305 10 tries to create filesystem instead of 3
306 src/GLIPortage, src/GLIArchitectureTemplate.py:
307 ignore_missing flag for copy_pkg_to_chroot()
308
309 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
310 src/GLIPortage.py:
311 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
312
313 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
314 src/net/server/gliserv.py:
315 fix handling of 404 for real files
316 src/net/server/GLIServerProfile.py:
317 look for 'hostname' in attributes instead of 'name'
318
319 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
320 src/SimpleXMLParser.py:
321 initial support for 'include' in XML files
322 src/GLIStorageDevice.py:
323 initial support for %
324 src/GLIClientController.py:
325 add debugging statements to pre-install steps
326
327 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
328 webgli/configfiles:
329 check for key in etc_files['rc.conf'] to fix key error
330 webgli/timezone: small fix.
331 webgli/extrapackages: list-type fix
332 webgli/services: same
333 glimd: add/edit_client updates.
334
335 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
336 added configure.pyhtml to glimd. minor changes
337 to top and add_client. fixed up showargs.
338 added execute.pyhtml
339 changed register clients line in gliserv for name->hostname.
340 updated TODO.
341
342 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
343 src/net/server/*:
344 added add/del/edit client/profile.pythml for glimd.
345 updated templates, showclients, and gliserv.
346
347 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
348 src/net/server/*:
349 stupid threading module...
350
351 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
352 AT: rc.conf -> conf.d/clock
353
354 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
355 src/GLIPortage.py:
356 show 'Calculating dependencies for ...' in subprogress bar at beginning of
357 emerge()
358 src/GLIArchitectureTemplate.py:
359 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
360 in the chroot
361 remove _quickpkg_deps() and _portage_best_{visible,version}()
362 src/GLIUtility.py:
363 fail immediately in validate_uri() if provided URI can't be parsed
364 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
365 debug code in spawn()
366 use lower-level os.read() instead of file.read() because python sucks
367 src/templates/x86ArchitectureTemplate.py:
368 basic subprogress reporting for partitioning
369 total_steps was 1 too high
370
371 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
372 src/GLIUtility.py:
373 move parse_vdb_contents() to GLIPortage
374 src/GLIPortage.py:
375 remove all symlink fixups
376 ignore 'dir' entries in CONTENTS
377 call tar with -p
378
379 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
380 AT: bootsplash is now gensplash
381 gliserv: add advanced_mode to shared_info
382 webgli: Added advanced mode. mostly just disables a few screens.
383
384 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
385 src/GLIPortage.py:
386 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
387 added emerge()
388 update sub-progress after each package is emerged
389 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
390 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
391 remove link if it exists before moving content into place
392 src/GLIArchitectureTemplate.py:
393 install_packages() now calls emerge() in GLIPortage
394 change all calls to self._emerge() to self._portage.emerge()
395 comment out all emerge status checking...using exceptions now
396 call copy_pkg_to_chroot() directly for livecd-kernel
397
398 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
399 src/GLIArchitectureTemplate.py:
400 remove add_pkg_to_world() and copy_pkg_to_chroot()
401 copy installer.log to installer.log.failed on install failure
402 src/GLIUtility.py:
403 added get_keymaps()
404 spawn() takes any False argument for chroot instead of just None
405 src/GLIPortage.py:
406 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
407 change copy_pkg_to_chroot() to work properly with use_root=False
408 figure PORTAGE_TMPDIR properly
409
410 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
411 src/net/server/html/*:
412 converted showclients, load/saveprofile
413
414 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
415 src/GLIPortage.py:
416 exclude packages already in chroot vdb from binary deplist
417 chroot to use best_version for chroot's vdb
418 src/runtimedeps.py:
419 accept ROOT via commandline instead of env
420
421 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
422 src/runtimedeps.py:
423 remove passing of ROOT
424 src/GLIPortage.py:
425 modify get_deps() to get deptree for each package and merge into final list
426 remove depgraph class
427 add debugging code to get_deps()
428 src/GLIArchitectureTemplate.py:
429 combine code for GRP/compile in install_packages() into one block
430 debugging code in install_packages()
431
432 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
433 src/runtimedeps.py:
434 initial commit
435 src/GLIPortage.py:
436 use separate script for GRP deps
437 remove calls to portage module
438
439 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
440 src/GLIPortage.py:
441 initial commit
442 move some of portage function from GLIAT
443 flipped around a few function args
444 src/GLIArchitectureTemplate.py:
445 revamp install_packages() for new GLIPortage
446
447 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
448 src/GLIArchitectureTemplate.py:
449 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
450
451 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
452 src/net/server/gliserv.py:
453 wrap generated code in a class to isolate it a bit better
454 302 redirects work
455 don't use cgi.escape() for <% %>
456 src/net/server/html/webgli/*:
457 load/save profile
458 src/GLIUtility.py:
459 change /sbin/lspci to just lspci
460
461 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 src/GLIClientController.py:
463 change ordering of statements in CC run() while loop to not go past the end
464 of the array
465 src/GLIArchitectureTemplate.py:
466 removed redundant bind mounts
467
468 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
469 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
470 added a diagram by blackace from last night.
471 added the glossary in RTF format.
472
473 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
474 x86AT: separated out emerge/configure from running of bootloader
475 added MBR drive support to lilo.
476 these changes will likely not work.
477 AT: added setup_and_run_bootloader step.
478
479 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
480 src/net/server/gliserv.py:
481 call generated code in a function
482 src/net/server/html/webgli/*:
483 include top/bottom
484 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
485 src/GLIClientCongifuration.py:
486 install mode magic
487
488 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
489 src/GLIClientController.py:
490 use GLIException when there's an import problem
491 added debug code to show install_steps
492 src/templates/amd64ArchitectureTemplate.py:
493 add . to import path
494 proper path this time: ../../templates
495 src/GLIArchitectureTemplate.py:
496 add _portage_best_version() function
497
498 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
499 added initial glossary and gimli diagram to the docs directory.
500 modify gli-dialog to allow editing of the install_profile after loading XML.
501
502 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
503 src/net/server/html/webgli/:
504 converted globaluse, localuse, networkmounts, portagetree, and stageselection
505 moved saveclientconfig stuff into clientconfig
506 moved saveconfigfiles into config files
507 converted etc_portage and makedotconf
508 converted bootloader and kernel
509 convert daemons, extrapackages, networking, review, services, timezone, users
510 src/net/server/gliserv.py:
511 proper 404 handling for .pyhtml extension
512 HTML escape <% %> stuff
513 work around python's sucky regexes
514 src/GLIInstallProfile.py:
515 allow set_{rsync,ftp,http}_proxy() to accept empty values
516
517 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
518 src/net/server/gliserv.py:
519 initial commit of Legolas templating engine
520 302 redirects
521 src/net/server/html/index.html, src/net/server/webgli_template.html:
522 minor changes for new code
523 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
524 initial commit of the conversion from the monolithic WebGLIHandler.py to the
525 one file per path Legolas goodness
526 partitioning[2-4] done
527
528 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
529 webgli: dhcp options in CC and post-install.
530 updated comparison chart.
531 webgli: etc/portage/* and distcc support added. not too-well tested.
532
533 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
534 webgli_template.html: valign=top on left side.
535 webgli: fix bootloader boot_device. now working.
536 webgli: CC proxy done. post-install proxy in progress.
537
538 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
539 src/net/server/webgli_template.html:
540 increase padding for content cell to 7px and add colspan=2
541
542 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
543 webgli: added graphic bar on top
544 webgli: added hover effects on the links on the left
545 webgli: re-rendered header_bg.png to stretch without artifacts
546
547 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
548 webgli: make.conf disabling fixes for dynamic_stage3
549 fixed portage snapshot browse popup
550 all changes tested.
551 webgli: add debug mode to CC screen. the screen still needs lots of work.
552
553 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
554 added debug mode question to gli-dialog
555 added CC proxies to CC networking for gli-dialog
556 webgli: fixed skip CC networking if connection active
557 webgli: portage snapshot defaults to CD
558 webgli: bootloader mbr drive selection
559 webgli: USE flags unselectable if dynamic_stage3
560 webgli: manual extra packages and save button.
561
562 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
563 src/GLIUtility.py:
564 change ping count to 2
565 docs/comparison.html
566 initial commit
567
568 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
569 src/templates/x86ArchitectureTemplate.py:
570 fix map() issue with grub code
571 replace kernel_names and initrd_names loops with one-liners
572
573 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
574 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
575 initial gli-dialog support for recommended partitioning layout and clear.
576 failure cleanup now an option for gli-dialog.
577 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
578 added comparison list and updated TODO!
579
580 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 src/GLIArchitectureTemplate.py:
582 fix to stage1() debug code
583 fix to stage2() debug code
584
585 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
586 some more bootloader code fixes. forgot boot_device != mbr_device.
587
588 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
589 src/GLIStorageDevice.py:
590 fix to unallocated space merging when last one is after part 4
591
592 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 src/GLIArchitectureTemplate.py:
594 small fix to debugging code in copy_pkg_to_chroot()
595
596 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
597 more bugfixes with bootloader code
598 gli-dialog side appears to work
599
600 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
601 initial adding of boot_device to backend.
602 initial boot_device support added to gli-dialog.
603 some fixes of my poor coding
604
605 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
606 converted gli-dialog to use the install_package_list.
607 gtkfe has already been converted by AllanonJL
608 new way working in gli-dialog now and added to webgli.
609 added set/get_boot_device() to IP
610
611 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
612 get_install_package_list added to InstallProfile. This can be used by the FEs
613
614 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
615 src/templates/x86ArchitectureTemplate.py:
616 call ls with '-1 --color=no'
617
618 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
619 added warning (#9) to GRP ppl about stage3 tarballs
620
621 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
622 src/GLIArchitectureTemplate.py:
623 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
624 confused
625
626 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
627 removed protocols from rc.conf screens
628 finished initial rc.conf and make.conf in webgli
629
630 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
631 src/net/server/gliserv.py:
632 add -h option to usage()
633 show time and request URI in debug mode
634 show client IP in debug mode
635 just use IP instead of trying to do a reverse lookup
636
637 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
638 src/net/server/gliserv.py:
639 'classier' 401 message
640 proper commandline parsing
641 help via -h
642 user/pass can be specificed via commandline option
643
644 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
645 src/net/server/gliserv.py:
646 basic HTTP auth
647
648 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
649 src/net/server/gliserv.py:
650 dynamic module reloading (yipee!)
651 send 'Last-Modified' header for real files
652 respond to HEAD with just headers
653 src/net/server/handlers/WebGLIHandler.py:
654 icons for drives
655
656 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
657 src/net/server/handlers/WebGLIHandler.py:
658 initial 'pretty' partition table display support
659 clicking partition in 'pretty' display works instead of radio buttons
660 radio buttons and pretty display work together
661 META redirect instead of javascript
662 pretty display stretches across entire screen
663 'Recommended layout' and 'Clear drive' functions
664 properly catch exceptions from do_recommended()
665 src/GLIArchitectureTemplate.py:
666 replace preinst, copy, postinst, rm steps with qmerge
667 whoops...that shouldn't have been commented out
668 create image_dir with -p in copy_pkg_to_chroot()
669 more generic of symlink crappiness
670 new copy_pkg_to_chroot() actually works now
671
672 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
673 src/GLIStorageDevice.py:
674 initial generic disk support
675 fixes for add_partition() code
676 src/net/server/handlers/WebGLIHandler.py:
677 added support for creating generic disks
678 add new partition working
679 save and delete partitions
680
681 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
682 webgli: Partitioning making progress.
683
684 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
685 src/GLIArchitectureTemplate.py:
686 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
687 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
688 dir) and works around /etc/gconf symlink problem
689
690 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
691 webgli: lots of updates. preliminary partitioning. extra packages works.
692
693 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
694 src/net/server/gliserv.py:
695 httpd now supports HTTPS and falls back to HTTP if not available
696 make fallback actually work
697 src/net/server/SecureXMLRPCServer.py:
698 SecureSocketServer is now threaded
699
700 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
701 src/net/client/gliclient.py:
702 try to use HTTPS for XMLRPC first and fallback to HTTP
703 pretend mode
704 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
705 HTTPS XMLRPC goodness from samyron
706 pass name of certificate
707
708 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
709 wegli: daemons and services screens done.
710
711 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
712 webgli: networking and users screens
713 added return_redirect to handler.py
714 loading and saving install/client profiles works for webgli now
715 Review also done
716
717 *GLI-0.2 (27 Oct 2005)
718
719 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
720 src/templates/x86ArchitectureTemplate.py:
721 properly check for bootloader emerge exist status with exitsuccess()
722 log output of grub install command
723 add --batch --no-floppy to grub command
724 grubinstallstring only gets logged if debug is on
725 src/GLIUtility.py:
726 update progress bar to 100% when process finishes
727
728 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
729 src/GLIClientController.py:
730 added debugging code for the interaction between the 2 threads via Event()
731 src/GLIUtility.py:
732 doubled the buffer size in spawn()
733 bump buffer size up to 16384
734 only report progress in 5% increments
735 src/GLIArchitectureTemplate.py:
736 kernelpkgs.txt support code
737 above disabled because it sucks
738 added add_pkg_to_world()
739
740 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
741 src/GLIArchitectureTemplate.py:
742 use tar | tar to copy files in copy_pkg_to_chroot()
743 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
744
745 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
746 DEBUGGING ADDED TO AT. verbose field added to CConfig.
747
748 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
749 src/net/server/gliserv.py:
750 / maps to index.html
751 look for actual files in html/
752 src/net/html:
753 new template
754 src/GLIUtility.py:
755 added parse_vdb_contents()
756 src/GLIArchitectureTemplate.py:
757 added copy_pkg_to_chroot()
758 added debug code to dynamic-stage3
759 switch dynamic-stage3 to new method
760 lots of bug fixes from adding debug code
761
762 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
763 webgli initial bootloader support + changed make.conf.
764 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
765
766 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
767 src/GLIUtility.py:
768 horrible tangled mess of code that is tarball unpacking subprogress display
769 add unpack progress to portage snapshot
770 use read() instead of readlines() in spawn()
771 only update progress bar for whole percents
772
773 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
774 src/templates/x86ArchitectureTemplate.py:
775 change call to 'grub' to use GLIUtility.exitsuccess()
776 add definition of 'build_mode' in _configure_lilo()
777 src/misc/updategtkfe, src/misc/updateglid:
778 fix so subshell is called in root shell
779
780 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/net/server/handlers/WebGLIHandler.py:
782 stage screen launches URI browser in sized window with various properties set
783
784 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
785 src/misc/updategtkfe:
786 updated to actually work
787 remove previous snapshot and extracted dir before downloading
788 src/misc/updateglid:
789 updated to actually work
790 src/templates/x86ArchitectureTemplate.py:
791 fixed bug where grub code was looking for 'root+root+file_name2'
792
793 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
794 src/net/server/handlers/WebGLIHandler.py:
795 URI browser
796 added mirror selection
797 src/GLIUtility.py:
798 ls via ssh strips off ending *
799
800 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
801 more updates to webgli. stage selection.
802
803 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
804 updated webgli with preliminary Network Mounts support.
805
806 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
807 GenDialog: string formatting and yes/no label fixes.
808 added WebGLI template for gliserv.py
809 added WebGLIHandler as well as a definition for it in gliserv.py
810 updates to the webgli files even though they won't be there for long.
811 Utility: remove exception for non-existant grppkgs.txt until the new livecd
812 goes public.
813
814 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
815 src/net/server/gliserv.py:
816 override dict to not be so anal
817 main server now loads separate module to handle requests
818 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
819 split out profile URLs into separate handler function
820 move handlers into subdirectory
821 add Welcome and Clients handlers
822
823 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
824 src/GLIUtility.py:
825 raise exception if password prompt received twice
826
827 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
828 src/GLIUtility.py:
829 removed rot13ify()
830
831 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
832 src/net/server/gliserv.py:
833 allow for param to be passed multiple times in GET
834 no XMLRPC functions return None
835 modify POST request parsing to only create a list if needed
836 fix GET request parsing so the list creation for multiple values works
837 src/net/client/gliclient.py:
838 various typo and type mismatch fixes
839 exit after exception
840
841 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
842 src/net/client/gliclient.py:
843 initial commit
844 pass MAC to XMLRPC functions
845 src/net/server/GLIServerProfile.py:
846 rename GLIClientsProfiles to GLIServerProfile
847
848 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
849 src/net/server/gliserv.py:
850 now handles POST requests
851 move majority of request handling code to common_handler() to reduce code
852 duplication
853 profile loading
854 client reg via XMLRPC goes into SharedInfo()
855 /showclients redesign
856 template fixes
857 allow handler functions to add/change headers
858 save profile
859
860 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
861 src/net/server/GLIClientsProfiles.py:
862 initial commit
863 src/net/server/template.html:
864 initial commit
865 src/net/server/gliserv.py:
866 add template mojo
867
868 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
869 src/net/server/gliserv.py:
870 XMLRPC mojo
871
872 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
873 src/GLIArchitectureTemplate.py:
874 add code in _edit_config() to comment line where variable is defined
875 previously
876 insert new line under previous definition of variable if it exists
877 small _edit_config() cleanup
878 src/GLIStorageDevice.py:
879 add clear_partitions() function
880 new sizes for recommended partition layout
881 automatically calculate swap size for recommended layout
882
883 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
884 src/templates/x86ArchitectureTemplate.py:
885 fat16 mojo
886
887 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 src/GLIStorageDevice.py:
889 prevent do_recommended() from being run twice
890 rewrite do_recommended() to be more robust
891 src/GLIArchitectureTemplate.py:
892 rework _edit_config() to not write duplicate entries
893
894 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
895 src/GLIStorageDevice.py:
896 added do_recommended() function to automatically created 256M/1G/* layout
897
898 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
899 src/gli-dialog.py: added set_distcc to the list
900 GenDialog: added set_distcc. untested.
901 IP: added install_distcc flag.
902 AT: added install_distcc function based on the flag. runs after build_kernel
903 changed AT spawn command for distcc for nodeps.
904
905 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/GLIUtility.py:
907 add rot13ify() function
908
909 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
910 src/GenDialog.py:
911 added a sentence of text. unchecking support added.
912
913 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
914 src/GLIUtility.py:
915 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
916 src/GenDialog.py:
917 still working on extra_packages. transformed the list to new format.
918 added GRP indication to list. untested.
919 TODO lists updated.
920 src/fe/dialog/gli-dialog.py:
921 spelling mistook.
922
923 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/GLIUtility.py:
925 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
926
927 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
928 src/GLIUtility.py:
929 add get_directory_listing_from_uri()
930 add http support to above
931 add ftp support to above
932 add scp support to above
933 src/GLIArchitectureTemplate.py:
934 "0" instead of 0 for key of single-element dict passed to _edit_config()
935
936 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
937 value_only -> only_value
938
939 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
940 gutted out all of etc_portage structure since it is now all handled by
941 etc_files
942
943 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 src/GLIArchitectureTemplate.py:
945 install_packages() sends progress update notifications
946 src/templates/x86ArchitectureTemplate.py:
947 increase sleep to 5s between format tries
948 src/GLIClientController.py:
949 pass 'self' to AT instead of 'self._pretend'
950
951 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
952 logger -> logger.log in x86AT
953
954 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
955 added set_etc_portage to IP. debugging gli-d's support for it.
956
957 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
958 src/templates/x86ArchitectureTemplate.py:
959 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
960
961 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
962 src/GLIArchitectureTemplate.py:
963 add _portage_best_version() function and rework install_packages() to allow
964 for future X of Y tracking
965 Use best_visible instead of best_version
966 tracked down and fixed missing = causing empty install extra packages
967 use = when emerging also
968 quickpkg hokey pokey
969 run _get_packages_to_emerge() again with -pk
970
971 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
972 src/ArchTemplate:
973 removed install_xorg_x11, and put the xorg.conf copying at
974 the end of install_packages.
975 added updateglid to /src/misc
976 updated all core files with new GPL notice and copyright statement.
977
978 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
979 src/GLIUtility.py:
980 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
981 a snapshot in /mnt/cdrom/snapshots/
982 get_snapshot_from_cd() adds file:// at the beginning
983 change calls to extra package special case functions to 'self.blah'
984
985 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
986 src/ArchTemplate: changed "voodoo".
987 changed order of portage sync methods. made a fallback to webrsync if
988 normal emerge sync fails.
989 removed get_sources_from_cd because it is obsolete.
990 add special cases to install_packages. remove fatal exception on package
991 install failure b/c the box will still be bootable.
992 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
993 handled in the FEs.
994 src/GenDialog: added a bunch of code for dealing with x11-based packages.
995 awaiting testing.
996
997 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
998 src/GLIStorageDevice.py:
999 global try/except block around fs resizable detection code
1000 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1001 install-failed cleanup function
1002
1003 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1004 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1005
1006 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1007 GLIGenDialog:
1008 add drive choices for loaded configs.
1009 force snapshot for dynamic_stage3
1010 init the snapshoturi input to the cd snapshot if not already selected.
1011 if dynamic_stage3, skip the make.conf step.
1012 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1013 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1014
1015 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1016 src/GLIArchitectureTemplate.py:
1017 manually call MAKEDEV in stage3-dynamic code
1018 copy /etc/inittab.old to /etc/inittab in chroot
1019 src/GLIUtility.py:
1020 add beginning of validate_uri() function
1021 add file:/// support to validate_uri()
1022 single quotes when setting livecd password
1023
1024 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1025 src/GLIGenDialog.py:
1026 change getmountpoint() to get_mountpoint()
1027 src/misc/updategtkfe:
1028 committed script to automatically download latest snapshot and run gtkfe
1029 src/templates/x86ArchitectureTemplate.py:
1030 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1031 src/GLIArchitectureTemplate.py:
1032 give tmp_minor an initial value in mount_local_partitions so that the value
1033 remain from the previous drive
1034
1035 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1036 src/templates/x86ArchitectureTemplate.py:
1037 Fix _configure_lilo() for IP using GLISD stuff
1038 src/GLIArchitectureTemplate.py:
1039 install_cron_daemon() treats "none" specially
1040
1041 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1042 old patch from Steven Mertens to resolve bug #96642
1043 numerous asthetic changes to GenDialog, no real functionality changes though.
1044 strings renamed for global use if necessary.
1045 fix all three parts of bug 102291
1046 disable set_etc_portage until fully-written.
1047
1048 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1049 src/GLIClientController.py:
1050 lower-case http/ftp proxy envvars
1051
1052 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1053 src/GLIClientController.py:
1054 log end of pre_install steps to aid in debugging
1055 src/templates/x86ArchitectureTemplate.py:
1056 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1057
1058 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1059 src/GLIArchitectureTemplate.py:
1060 check to make sure that the device node we're wait for to exist isn't of
1061 type 'free'
1062
1063 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1064 src/GLIGenDialog.py:
1065 convert install_packages to list in set_extra_packages()
1066 check return code of checklist() call in "Manual" section
1067 *actually* fix the first problem
1068
1069 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1070 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1071 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1072
1073 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1074 src/GLIArchitectureTemplate.py:
1075 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1076
1077 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 Add CDATA support to SimpleXMLParser and add utility functions for it.
1079
1080 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1081 src/GLIArchitectureTemplate.py:
1082 Fix case where vixie-cron is specified as a full package atom, as we still
1083 don't want to run 'crontab /etc/crontab' for it.
1084
1085 *GLI-0.1 (3 Aug 2005)
1086
1087 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1088 add scp to list of is_uri() so GenDialog doesn't complain.
1089 fixed livecd-kernel bug in bootloader code.
1090 fixed gendialog for dynamic_stage3 instead of "networkless"
1091 change bootloader to allow for both initrd and initramfs.
1092 fix IP for dynamic_stage3.
1093 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1094
1095 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1096 Added full scp:// URI support to get_uri() in GLIUtility
1097 Remove "networkless" from dynamic stage3 if locic.
1098 Remove print statement from scp:// code.
1099 Change scp code to check for "assword: " instead of "Password:"
1100 Fix post-install network code to create net.eth1+ symlink correctly
1101 Check to make sure pkg can be split on / and some debugging code
1102 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1103 SimpleXMLParser handles True/False/None correctly now
1104 Comment out above fix
1105 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1106
1107 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1108 Removed a FIXME in the GLIClientConfiguration that is no
1109 longer needed.
1110
1111 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1112 Default to x86 in ClientConfig
1113 Typo in build-a-stage3 code.
1114 Remove MAKEDEV call in build-a-stage3 postscript.
1115
1116 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1117 Rewrote init of IP for gli-d. Other GenDialog updates.
1118 allow network_type to be None in CConfig.
1119
1120 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1121 Add _dynamic_stage3 option to IP.
1122 Add check for that option to dynamic stage3 code in ArchTemplate.
1123 Fix code to determine default route in get_eth_info() in GLIUtility.
1124 Fix serialization of dns-servers in ClientConfig.
1125
1126 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1127 changed default values of cron/logger in IP.
1128 moved GenDialog IP init out to the individual files. gli-dialog's version
1129 will change quite a bit.
1130
1131 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1132 added ppcArchTemplate. blank now. working on yaboot.
1133 modified ArchTemplate for amd64 and ppc custom kernels.
1134 skeleton implementation of _configure_yaboot.
1135 small fixes to other templates.
1136
1137 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1138 GenDialog updates. changed comment in IP.
1139
1140 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1141 src/GLIInstallProfile.py:
1142 Fix codeman's screwup of changing the service seperator to ',' in the parser
1143 without changing it in the serialization code! Also document this in a
1144 comment so you find it easier. Everybody needs to make sure they update
1145 their install profiles!
1146
1147 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1148 src/GLIArchitectureTemplate.py:
1149 Fix casting of list to string and concat of None with string, as well as
1150 commented prototype of checking that mounting actually worked (found a case
1151 where mount can return success, but the mount won't be done).
1152
1153 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1154 src/templates/x86ArchitectureTemplate.py:
1155 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1156 checking for the device, and sleeping 1 second each time.
1157
1158 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1159 src/templates/x86ArchitectureTemplate.py:
1160 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1161 bootloader works again. Also rename _install_{grub,lilo} to
1162 _configure_{grub,lilo} since they don't install the loaders anymore
1163 themselves.
1164
1165 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1166 fix global USE flags to not include the arch types at the end.
1167 updates to GenDialog and gli-d.
1168
1169 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1170 fixing bootloader code for no initrd and initrd->initramfs naming change.
1171
1172 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1173 Proper comments and parameters to GLIException in install_mta()
1174 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1175 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1176 list_tarball_from_mirror() to eliminate blank last item.
1177
1178 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1179 Added stage3 generation code.
1180
1181 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1182 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1183 Mild changes to GenDialog.
1184
1185 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1186 Remove separate install step configure_rc_conf() since it's handled by
1187 update_config_files()
1188 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1189 function is called twice on the same file.
1190
1191 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1192 Missing \ in sed in _get_packages_to_emerge()
1193 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1194 Check in _quickpkg_deps() to ignore blank package names returned from
1195 _get_packages_to_emerge()
1196
1197 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1198 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1199 in the dialog.py gauge code.
1200
1201 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1202 Add code to update_config_files() to go through etc_files and update stuff.
1203 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1204 Only use float() in partition xml parsing code if type == "free"
1205
1206 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1207 finished almost all internationalization of GenDialog.
1208 attempt at fixing rc.conf function. moved 3 generate functions out of
1209 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1210 added dialog.py to the fe/dialog directory so it actually gets used.
1211
1212 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1213 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1214
1215 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1216 fix extra entry in list_mirrors()
1217 beginning internationalization runthrough.
1218
1219 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1220 added dialog.py to /src temporarily until it gets accepted upstream.
1221 fix for unused value in form in dialog.py and changed heights.
1222 fix GenDialog forms.
1223
1224 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1225 Changed hostname/domainname for new baselayout.
1226 Changed _add_to_runlevel errors to logs.
1227 Updated TODO list to show status of GenDialog
1228 More updates to GenDialog including two checklists that probably won't work.
1229 update IP to use comma-separated list instead of space separated for services.
1230
1231 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1232 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1233 GenDialog as it gets closer to completion.
1234
1235 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1236 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1237 instead of int() in add_partition_device_partition() for minor (closes 96804)
1238
1239 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1240 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1241 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1242 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1243
1244 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1245 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1246 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1247 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1248 Fix undefined variable 'output' issue in spawn().
1249
1250 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1251 More updates to GenDialog and gli-d.
1252
1253 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1254 Modify list_mirrors() to return a list of mirror URL/name pairs.
1255
1256 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1257 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1258 get subarch.
1259
1260 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1261 Backend partitioning will create disklabel is none exists. Installprofile
1262 defaults to "" now instead of "msdos" for disklabel type. Fix for
1263 mount_local_partitions() to remember device along with minor in the
1264 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1265 add else block to log unsupported netmount types to mount_network_shares()
1266
1267 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1268 src/GLIArchitectureTemplate.py:
1269 Refactor kernel_compile common stuff, fix 2.4 build process.
1270 src/fe/cli/clife.py:
1271 Logging system.
1272 src/GLIUtility.py, src/GLIStorageDevice.py:
1273 Add comments about re-writes needed for boxes without sysfs.
1274
1275 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1276 src/GLIArchitectureTemplate.py:
1277 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1278 'make dep' call for custom compile. build_mode support for prepare-only and
1279 none types completed. custom compile function chains shell functions in
1280 spawned script, to allow for catching all errors.
1281
1282 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1283 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1284 and GenDialog. other gendialog updates as well. kernel updates untested.
1285
1286 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1287 src/GLIInstallProfile.py:
1288 Change structure of etc-portage stuff. The serialization was broken before my
1289 last commit, and I am the only person that's ever used it. The new schema is
1290 as follows:
1291 <etc-portage>
1292 <file name="package.mask"/>
1293 <file name="package.unmask">
1294 <entry atom="sys-kernel/openmosix-sources"/>
1295 </file>
1296 <file name="package.use">
1297 <entry atom="sys-libs/db">
1298 -java
1299 </entry>
1300 <entry atom="dev-libs/cyrus-sasl">
1301 -ldap
1302 </entry>
1303 </file>
1304 </etc-portage>
1305
1306
1307 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1308 src/GLIInstallProfile.py:
1309 Add new entry for gli-profile/kernel-build-method item. Add missing
1310 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1311 keys in the same order.
1312
1313 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1314 src/GLIArchitectureTemplate.py:
1315 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1316 was repeatedly appended to make.conf.
1317
1318 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1319 src/GLIArchitectureTemplate.py:
1320 Put some Linux-2.6 specific code under a if statement. Store list of
1321 successfully mounted swap device for using swapoff. Add proper error checking
1322 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1323 'file'. Clean up some redundant code (thanks to pychecker).'
1324
1325 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1326 Fix typos: get_extended() instead of get_extended_partition(). Added
1327 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1328 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1329
1330 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1331 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1332 in add_network_interface.
1333
1334 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1335 src/GLIArchitectureTemplate.py:
1336 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1337 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1338 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1339 prepare_chroot.
1340
1341 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1342 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1343 +src/fe/installer-gtk:
1344 Add new automated CLI frontend. Add scripts that are the intended means to
1345 use each frontend.
1346
1347 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1348 src/GLIClientController.py:
1349 Add null type to network config, for cases where the interface is already up
1350 and should not be touched (netboot for example).
1351
1352 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1353 src/GLIArchitectureTemplate.py:
1354 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1355 string!. Try to use binary packages if available by default.
1356
1357 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1358 src/GLIArchitectureTemplate.py:
1359 More error checking for _add_to_runlevel, to ensure that the init script
1360 actually exists before we try to add it. set_services phase must take place
1361 after the package installation, otherwise the init scripts might not exist.
1362 Find the correct init script for the cron and logging daemons, and add that
1363 instead of the package atom.
1364
1365 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1366 src/GLIArchitectureTemplate.py:
1367 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1368 usage of 'file' to 'contents' for the variable name, as it shadows
1369 __builtin__.file.
1370
1371 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1372 src/GLIArchitectureTemplate.py:
1373 Add MTA install code, and include MTA install phase. Ensure
1374 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1375 for 'none' kernel config for build_kernel phase. Put kernel_script in
1376 /var/tmp instead of /root for build_kernel phase.
1377
1378 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1379 Rename mta variables to match syslog/cron variables.
1380
1381 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1382 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1383 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1384 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1385 src/templates/.cvsignore, src/tests/.cvsignore:
1386 Refactor partition formatting again to include error checking. Allow 'none'
1387 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1388
1389 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1390 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1391 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1392 only have a single spawn call.
1393
1394 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1395 refixed samyron's fix of set_architecture_template.
1396
1397 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1398 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1399 be executable.
1400
1401 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1402 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1403 error checking when you call set_architecture_template.
1404
1405 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1406 moved the mkfsopts input to the partition options menu instead of the during
1407 the creation process. updated GenDialog to say it supports reiserfs v3.
1408
1409 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1410 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1411 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1412 Add support for other partition types to dialogfe.
1413 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1414 avoid integer overflows and wraparounds.
1415
1416 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1417 Removed start/end from XML output and added mkfsopts to partitioning info.
1418 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1419 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1420 in GLIClientConfiguration. Change from .1 and .9 to constants for
1421 partitioning. Fix free space overwriting bug. Remove a few unused functions
1422 from rewrite. Fix call to get_partition_at()
1423
1424 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1425 Updates to GenDialog and dialogfe.
1426
1427 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1428 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1429
1430 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1431 more GenDialog updates to partitioning.
1432
1433 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1434 Indenting issue in GLISD/get_ordered_partition_list.
1435 updates to GenDialog partitioning and added default UTC for timezone in IP.
1436
1437 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1438 Added GLISD.get_model()
1439
1440 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1441 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1442 More updates to GenDialog :)
1443
1444 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1445 Added get_interface_realname() function.
1446
1447 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1448 Added auto-save of CConfig and copying to new /root after install.
1449 yet even more GenDialog updates.
1450
1451 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1452 removed print statement from GLISD. more updates to GenDialog.
1453
1454 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1455 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1456 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1457 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1458 places in GLIClientConfiguration.
1459
1460 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1461 Fix mount_local_partitions(), configure_fstab(), and
1462 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1463 A few more fixes for templates/x86Archtemplate
1464
1465 27 May 2005; Preston Cody <codeman@gentoo.org> :
1466 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1467 a work in progress.
1468
1469 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1470 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1471 directly. GLISD can now handle data imported from XML.
1472
1473 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1474 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1475 handle blank (no disklabel) disks.
1476
1477 20 May 2005; Preston Cody <codeman@gentoo.org> :
1478 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1479 up, documented, and separated out serialization and grouped all sections.
1480
1481 19 May 2005; Preston Cody <codeman@gentoo.org> :
1482 Reorganization of ClientConfiguration and gutting of unused functions.
1483 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1484
1485 18 May 2005; Preston Cody <codeman@gentoo.org> :
1486 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1487
1488 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1489 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1490 partitioning. CC serializes install profile to disk and prepare_chroot()
1491 copies it into /mnt/gentoo/root
1492
1493 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 Moved URI parsing into new function parse_uri()
1495
1496 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1497 Added XMLParser module.
1498
1499 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1500 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1501 Minor fix to is_uri() regex to allow hyphens in hostname.
1502
1503 12 May 2005; Preston Cody <codeman@gentoo.org> :
1504 Updated finishing_cleanup for new unmounting method from agaffney.
1505
1506 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1507 Fix GLILogger to use correct time format string. Fix _edit_config() to
1508 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1509 unicode support to is_realstring().
1510
1511 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1512 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1513 return value instead of non-zero. Add code to output a traceback to the
1514 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1515 instead of --nocolor.
1516
1517 10 May 2005; Preston Cody <codeman@gentoo.org> :
1518 Added GLIGenDialog.py to make a generic class for the dialog functions that
1519 can be used by both dialogfe and the netfe/be. updated both for new filename.
1520 date changes. 2004->2005.
1521
1522 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1523 Removed 'quiet=True' from spawn() calls
1524
1525 10 May 2005; Preston Cody <codeman@gentoo.org> :
1526 Updated GLIUtility with patches from chotchki. Also added documentation
1527
1528 9 May 2005; Preston Cody <codeman@gentoo.org> :
1529 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1530 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1531 from bug #89683, mostly touchups.
1532
1533 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1534 GLIStorageDevice cleanup patch from bug #91761
1535
1536 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1538 _edit_config(). Error logging casts 'error' to str
1539
1540 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Exceptions received in CC are logged before being passed to the FE. Added
1542 code to CC to handle exceptions *not* thrown by the installer itself.
1543
1544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1545 get_max_mb_for_resize() returns -1 if not self.resizeable
1546
1547 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1548 More dirty rsync hacks :-/
1549
1550 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1551 Patches from chotchki (bug #90325) to improve CC networking. untested.
1552
1553 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1554 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1555 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1556 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1557 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1558 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1559 _get_packages_to_emerge()
1560
1561 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1562 Added group-adding code to set_users in ArchTemplate
1563
1564 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1565 Added post-install script code
1566
1567 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1568 Fixed encapsulation issues in GLIClientController (bug #90141)
1569
1570 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1571 Update resizing code in GLIStorageDevice
1572
1573 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1574 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1575
1576 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1577 Reverted change to ArchTemplate and added support for commented line in old
1578 code.
1579
1580 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1581 Changed _edit_config() to modify value in-place instead of commenting out and
1582 adding the new value to the end of the file.
1583
1584 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1585 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1586 Also updated TODO list.
1587
1588 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Use blackace's one-liner to add comments for all function for use with
1590 pythondoc.
1591
1592 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1593 Moved 'end >= device_sectors' check out of loop to check for next partition's
1594 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1595 Partitioning code now tracks start/end of extended for placing logicals. End
1596 point of logical is now adjusted along with start.
1597
1598 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1599 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1600 the way of partitioning from a blank disk. Add int() around access to minor
1601 key in partition information due to new partition code leaving them as float.
1602
1603 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1604 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1605
1606 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1607 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1608
1609 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1610 Added support for DHCP options and MAC addresses in the InstallProfile.
1611
1612 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1613 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1614 sed to properly strip out junk.
1615
1616 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1617 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1618 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1619
1620 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1621 Fixed indent problem in GLICController
1622
1623 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1624 Check for disklabel type "loop" and use the device name without a minor.
1625
1626 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1627 Remove /tmp/compile_output.log and /var/log/install.log when install is
1628 complete. Added code to (hopefully) keep 2nd thread running after install.
1629 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1630 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1631 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1632
1633 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1634 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1635 when unpacking tarball.
1636
1637 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1638 rewrote filesystem_tools. looks like it works so ripping out all the old
1639 filesystem_tools code.
1640
1641 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1642 Changed the print statements to logging in the partitioning BE code.
1643 the logger may need to be imported to the x86archtemplate. unknown yet.
1644 Added the finishing_cleanup function.
1645 added a fix to the logger from BenUrban
1646
1647 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1648 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1649 URIs. The blank uri check has been commented out.
1650 ripped out error checking of set_services. this is done by _add_to_runlevel.
1651
1652 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1653 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1654
1655 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1657 the install profile if available. Commented out spawn() debugging prints
1658
1659 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 small changes to setup_network_post. moved adding to runlevel of net.x to
1661 after the device gets symlinked. added domainname runlevel command.
1662
1663 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1664 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1665 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1666 spawn() call in livecd-kernel code to pass environment variables.
1667 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1668 the install profile if available.
1669
1670 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1671 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1672 to handle installing the livecd kernel into the new system.
1673
1674 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1675 should emerge hotplug and coldplug before adding them to runlevel.
1676
1677 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1678 took chroot out of grub_install command.
1679
1680 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1681 Changed chroot wrapper code in spawn() to write the wrapper the python way
1682 instead of the bash way to avoid quote conflicts. Added
1683 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1684 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1685 as it breaks the piping.
1686
1687 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1688 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1689
1690 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1691 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1692 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1693 GLIInstallProfile.
1694
1695 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1696 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1697 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1698 into /mnt/gentoo in prepare_chroot()
1699
1700 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1701 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1702 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1703 to start/end sectors
1704
1705 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1706 Add 2>&1 to cmd in spawn()
1707
1708 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1709 Modified GLIUtility.exitsuccess() to work with return value from
1710 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1711 creates wrapper script for commands run inside chroot so multiple commands
1712 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1713 for the generated script from spawn()
1714
1715 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1716 Removed default values for stage tarball URI and portage tree URI from
1717 InstallProfile. These should be set by the FEs. also added services step to
1718 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1719 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1720
1721 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1722 Small fix for setting the default gateway. Also added feature to dialogfe.
1723
1724 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1725 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1726
1727 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1728 Fixed a bunch of true -> True typos. lots of em
1729 only write new resolv.conf if there are dns servers listed.
1730
1731 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1732 Commented out 'display_on_tty8=True' in start_portmap()
1733
1734 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1735 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1736
1737 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1738 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1739 lang parameter to __init__()
1740
1741 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1742 updates to TODO list.
1743
1744 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1745 Initial code for quickpkg GRP support. Fix loop to grab packages from
1746 'emerge -p blah'
1747
1748 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1749 check for dhcp in the network stuff and emerge it if it is.
1750 added quickpkg to TODO list
1751
1752 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1753 Changed the raising of 'warning' exceptions to a simple log of the error
1754 so that the installer can continue.
1755
1756 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1757 Some big changes. First, changed most output to display_on_tty8.
1758 Second, added log lines to all templates. Some smaller fixes such as typos.
1759 Also did some cleanups of old commented lines.
1760
1761 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1762 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1763 Undo change with fix. Escaping fix in GLIStorageDevice.py
1764
1765 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1766 more updates to TODO list. hopefully we'll soon start removing items instead
1767 of adding them.
1768
1769 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1770 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1771
1772 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1773 updated TODO list. (again)
1774
1775 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1776 changed output of portmap start to display_on_tty8.
1777 fixed bootloader for udev and multiple kernels
1778 fixed custom kernel config (again)
1779
1780 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1781 changed default value of CC._enable_ssh to True because this is smart.
1782 added code to allow custom kernel .config. may be unstable and break. sorry.
1783
1784 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1785 partition() now waits until after it checks for partition flags before delete
1786 the partitions :P
1787
1788 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1789 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1790 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1791 blank.
1792
1793 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1794 Various fixes related to the add_users function. Still not yet finished.
1795 Added things to the TODO list. Lets start using that!
1796
1797 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1798 Added code to x86Template to format newly created partitions. Also added
1799 some error checking code. GLIStorageDevice passes 'minor' with data to
1800 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1801 mounting code.
1802
1803 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1804 Took out unnecessary setting of random livecd root password. the cd already
1805 sets it randomly.
1806
1807 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1808 Took out an unneeded step from CC's run()
1809
1810 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1811 Attempt at detecting and adding windows partitions to lilo.
1812
1813 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1814 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1815 partition. fixed misc exit_status => exitstatus typo.
1816
1817 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1818 Added basic code for resizing filesystems with pyparted. Fixed code for
1819 resizing ntfs and ext2/3.
1820
1821 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1822 Fixed partition() in x86Template so that it scans through logicals and deletes
1823 before deleting containing extended partition. Also clears partition table to
1824 be safe before third pass.
1825
1826 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1827 Added mount_network_shares. not able to test it from this computer.
1828 will test when i get back to school.
1829 also added start_portmap to the client_controller as an always-do.
1830 agaffney says this is needed for NFS mounts to work.
1831
1832 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1833 Partial rewrite of partitioning code in x86Template. No longer shells out to
1834 parted to perform actions, now uses all pyparted calls. Code "works" in a
1835 test, but still needs lots of TLC. Also modified tests/install.py to work
1836 with x86Template and GLIClientConfiguration.
1837
1838 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1839 Initial move of partitioning code from ArchTemplate to x86Template.
1840
1841 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1842 Added grp_install and services to InstallProfile. forgot about the set_root_password
1843
1844 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1845 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1846 agaffney. Test Install ran very well (skipping partitioning).
1847
1848 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1849 My mid-day update. rewrote mount_local_partitions for order of mounting.
1850 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1851 partition format. fixed a few _edit_configs. some may still have eluded me.
1852
1853 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1854 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1855 to test it.
1856 Just finished mount_local_partitions in GLIArchitectureTemplate
1857
1858 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1859 Added get_num_sectors() to GLIStorageDevice.
1860
1861 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1862 GLIStorageDevice now tracks partition boundaries in sectors instead of
1863 cylinders.
1864 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1865 from GLIInstallProfile.
1866
1867 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1868 GLIStorageDevice returns "unknown" instead of "" for get_type()
1869
1870 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1871 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1872 actually work. Commented out resizability checking code for speed.
1873
1874 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1875 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1876 in GLIStorageDevice at the suggestion of plors
1877
1878 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1879 Added a function to GLIUtility to pull a value from a make.conf-style config
1880 file. Minor type fix to GLIInstallProfile.py
1881
1882 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1883 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1884 Separated network mounts from partition data structure in GLIInstallProfile
1885
1886 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1887 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1888 can be resized.
1889
1890 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1891 Added some of the final functions to GLIInstallTemplate.
1892 Yes this project is still active despite rare use of the Changelog!
1893
1894 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1895 Added the GLIPartitionTools.py file. This is a temporary insertion of
1896 partitioning tools that will eventually go into their own package.
1897
1898 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1899 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1900 run-time for the program). Added __init__(install_profile,
1901 client_configuration) to GLI.InstallProfile. This sets install_profile and
1902 client_configuration once so as to avoid constantly passing stuff every time
1903 we call a method.
1904
1905 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1906
1907 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1908 config files without messing up all the other stuff in them. This will be
1909 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1910
1911 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1912
1913 Added GLI.InstallTemplate framework. This is not yet functional. However,
1914 it does have a few basic things. I added two private methods. One is
1915 _depends(). This will be used for dependency checking (ie. unpacking a
1916 tarball requires that partitioning has been done). The other is
1917 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1918 instead of being run in the liveCD environment, it runs in the chroot. This
1919 requires a bit of fork() magic, so I isolated the code. Hope to work more
1920 this week to get this class formed...
1921
1922 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1923 Added SAX parsing. Made GLI.InstallProfile a subclass of
1924 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1925 to be lists instead of tuples to allow for easier modification (mutable,
1926 rather than immutable objects). Updated existing pydoc and added more.
1927 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1928 GLI.py a bit. Fixed all accessors to use self references.
1929 Added initial unit test code.
1930
1931 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1932 Added initial changelog. Setting up the basic structure of the CVS repository
1933 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1934 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20