/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1483 - (show annotations) (download)
Sat Jul 29 15:58:28 2006 UTC (7 years, 11 months ago) by agaffney
File size: 80077 byte(s)
  src/GLIArchitectureTemplate.py:
  skip blank entries/files in update_config_files()

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.667 2006/07/29 15:58:28 agaffney Exp $
4
5 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 skip blank entries/files in update_config_files()
8
9 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
10 src/templates/x86ArchitectureTemplate.py:
11 move logical clipping logic a bit
12
13 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
14 I've commented out most of the code that used launch. It wasn't working and
15 we don't have the time to fix it before the release. I'll look into it after
16 the release and make it more robust and flexible.
17
18 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/templates/x86ArchitectureTemplate.py:
20 clip logical partition at end of extended
21
22 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
23 src/GLIInstallProfile.py:
24 Added a few more applications to the list of extra packages to be merged,
25 all from various GRP sets.
26
27 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
28 Added launch variable to the end of each try-run with auth, which should
29 cause this to function properly. Of course, more testing is needed.
30
31 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
32 Fix a missed space in the installer script.
33
34 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
35 src/GLIClientController.py:
36 log version-stamp
37
38 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
39 Updated the installer script to allow specifying the front-end to run from
40 the command line. Currently, it only supports dialog and gtk. It still needs
41 some testing, however.
42
43 9 July 2006; Preston Cody <codeman@gentoo.org>
44 src/GLIGenDialog.py:
45 make lilo only show up for x86 if non-networkless
46
47 25 Jun 2006; Preston Cody <codeman@gentoo.org>
48 src/GLIGenDialog.py:
49 adding code to auto-add doscsi if a scsi drive detected.
50 this code is also in the gtkfe already
51
52 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIPortage.py:
54 pass proper PORTAGE_TMPDIR
55
56 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
57 src/GLIUtility.py:
58 fix list_mirrors() to ignore <uri> lines that don't end on the same line
59
60 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
61 Added code to the mta step in AT to parse the install packages list and
62 look for mtas and if it finds it emerge it.
63 Initial attempt at moving extra_packages early in the setup to only show
64 local USE flags relating to those packages.
65 .. abandoned local USE project. no right way to do it.
66
67 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
68 src/GLIUtility.py:
69 minor tweak to regex for parsing mirrors.xml
70
71 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/templates/x86ArchitectureTemplate.py:
73 make use of strict_start and strict_end in partition recreation
74
75 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/templates/x86ArchitectureTemplate.py:
77 add strict_start and strict_end parameters to _add_partition()
78 add _find_current_minor_for_part() function to help with resizing
79 fix logical/extended logic in _partition_delete_step()
80 in _partition_resize_step(), delete, recreate at new size, resize, delete
81 call resize2fs with no size argument so it fills entire partition
82 more logging
83 only delete, recreate, resize, delete if growing
84 pass new size to resize2fs in K
85
86 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
87 src/GLIStorageDevice.py:
88 call reorder_minors() from tidy_partitions() instead of
89 set_partitions_from_disk()
90 add code to reorder_minors() to take extended/logical into consideration with
91 non-free partitions
92
93 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
94 added a check of the length of the directory in /usr/src if under 6 characters
95 should fix bug 131809
96
97 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
98 src/GLIArchitectureTemplate.py:
99 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
100 and livecd-kernel
101
102 16 Apr 2006; Preston Cody <codeman@gentoo.org>
103 src/GLIGenDialog.py:
104 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
105
106 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
107 src/GLIInstallProfile.py:
108 change kernel-modules to not be so stupid
109
110 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
111 GLIMD: fix display problem with execute.pyhtml.
112 make tables better.
113
114 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIInstallProfile.py:
116 fix handling of int/float for minor
117 src/templates/x86ArchitectureTemplate.py:
118 save/restore partition name
119 src/GLIStorageDevice.py:
120 support for partition name
121
122 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
123 touchups to add_profile in GLIMD to link to webgli
124 add a save to GLIMD profile button in webgli's saveprofile
125 gliserv.py:
126 initial attempt at custom networking info per client. hostname support only.
127
128 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
129 src/net/server/html/webgli/partitioning[234].pyhtml:
130 small fixes for new partioning code
131
132 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
133 src/GLIClientController.py:
134 record PID of secondary thread
135
136 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
137 src/GLIGenDialog.py:
138 small fix for new partitioning code
139
140 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
141 src/GLIStorageDevice.py:
142 add get_devnode()
143 fix up detect_devices() to detect cciss/ida arrays
144 src/templates/x86ArchitectureTemplate.py:
145 use get_devnode() instead of figuring out the devnode
146 skip first 3 steps if partition layout hasn't changed
147 wipe disk and create new disklabel before recreating partitions
148 src/GLIArchitectureTemplate.py:
149 use get_devnode() in local mount and fstab stuff
150
151 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
152 src/GLIStorageDevice.py:
153 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
154
155 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
156 src/templates/x86ArchitectureTemplate.py:
157 continue breakup/cleanup of partitioning code
158
159 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
160 src/GLIStorageDevice.py:
161 set disklabel to default for arch when clearing the partition table
162 src/templates/x86ArchitectureTemplate.py:
163 complete rewrite of first and second passes
164
165 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
167 allow iterating over Device object to get partitions
168
169 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 allow access to Device object like a dict
172
173 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIStorageDevice.py:
175 allow access to Partition object like a dict
176
177 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/templates/x86ArchitectureTemplate.py:
179 fail if any filesystems are mounted on the device being partitioned
180
181 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/GLIStorageDevice.py:
183 reorder minor numbers when loading partitions from disk to match the physical
184 partition order
185
186 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
187 src/GLIStorageDevice.py:
188 overhaul for supporting mac disklabels and partitions out of disk order
189 remove free space from inside extended partition when extended is removed
190
191 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
192 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
193 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
194 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
195 Added bash scripts, icons, and desktop entries from the ebuild to make my
196 life easier.
197
198 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
199 src/GLIStorageDevice.py:
200 raise an exception if the existing partitions are out of disk order
201 look for minors out of order instead of disk position
202
203 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
204 src/fe/dialog/gli-dialog and src/GLIGenDialog:
205 added networkless mode to gli-dialog.
206
207 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
208 src/templates/x86AT:
209 add windows detection code for grub. untested.
210
211 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
212 src/templates/x86ArchitectureTemplate.py:
213 bootloader and partitioning external commands log to compile_output.log
214 wait for device node to exist before resizing
215 add -v to ntfsresize command
216 src/GLIStorageDevice.py:
217 return start/end with ip structure
218 pad min ntfs size by 50 MB just to be safe
219 src/GLIArchitectureTemplate.py:
220 only install filesystem tools for partitions with a mountpoint
221
222 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
223 add error catching and text to saving profile dialogs
224
225 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
226 src/GLIPortage.py:
227 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
228 src/templates/x86ArchitectureTemplate.py:
229 fix checks for changed partitions so they will actually get deleted
230
231 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
232 src/GLIClientController.py:
233 slightly better error handling for pre-install failures
234
235 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
236 src/templates/x86ArchitectureTemplate.py:
237 proper return code checking for ext2/3 resizing
238
239 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIClientController.py:
241 accept 'none' as well as 'null' for network type
242 src/GLIArchitectureTemplate.py:
243 ignore extended partitions in mount_local_partitions()
244 src/templates/x86ArchitectureTemplate.py:
245 use get_ordered_partition_list() instead of keys().sort() for new_part_list
246 check to make sure start sector for primary isn't less than end sector for
247 previous extended
248 src/GLIClientController.py:
249 write dns servers to /etc/resolv.conf
250
251 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
252 src/GLIPortage.py:
253 copy_pkg_to_chroot() uses compile_output.log for command output
254
255 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
256 only keep a 1000 line 'scrollback' buffer for the compile output and log file
257
258 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
259 src/GLIPortage.py:
260 add code make GLIPortage.py capable of being run stand-along for dynamic
261 stage3 generation and copying packages in a GRP-ish way
262 grp code fixups
263
264 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
265 src/GLIPortage.py:
266 ignore blank packages passed to get_deps() and emerge()
267
268 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
269 src/GLIUtility.py:
270 add get_chosts() function
271
272 *GLI-0.3 (12 Feb 2006)
273
274 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
275 src/templates/x86ArchitectureTemplate.py:
276 pull old start/end sector values from somewhere that actually has them
277 add logic for extended partition to code that makes sure new end sector
278 doesn't overlap start sector of next partitions
279 don't freak out if partition can't be deleted
280
281 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
282 src/GLIPortage.py:
283 run env-update at the end of copy_pkg_to_chroot()
284
285 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
286 src/templates/x86ArchitectureTemplate.py:
287 I'm a complete fscking dumbass. I recorded the end sector for partitions that
288 weren't being touched, but I never used it when recreating them...the end was
289 calculated from the size in MB instead :/
290
291 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
292 src/GLIArchitectureTemplate.py:
293 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
295 src/GLIPortage.py:
296 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
297 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
298 'resized' flag
299
300 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
301 src/GLIPortage.py:
302 short circuit and check vdb directly if package begins with '='
303
304 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
305 added more packages to extra_packages list in IP
306
307 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
308 src/templates/x86ArchitectureTemplate.py:
309 10 tries to create filesystem instead of 3
310 src/GLIPortage, src/GLIArchitectureTemplate.py:
311 ignore_missing flag for copy_pkg_to_chroot()
312
313 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
314 src/GLIPortage.py:
315 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
316
317 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
318 src/net/server/gliserv.py:
319 fix handling of 404 for real files
320 src/net/server/GLIServerProfile.py:
321 look for 'hostname' in attributes instead of 'name'
322
323 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
324 src/SimpleXMLParser.py:
325 initial support for 'include' in XML files
326 src/GLIStorageDevice.py:
327 initial support for %
328 src/GLIClientController.py:
329 add debugging statements to pre-install steps
330
331 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
332 webgli/configfiles:
333 check for key in etc_files['rc.conf'] to fix key error
334 webgli/timezone: small fix.
335 webgli/extrapackages: list-type fix
336 webgli/services: same
337 glimd: add/edit_client updates.
338
339 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
340 added configure.pyhtml to glimd. minor changes
341 to top and add_client. fixed up showargs.
342 added execute.pyhtml
343 changed register clients line in gliserv for name->hostname.
344 updated TODO.
345
346 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
347 src/net/server/*:
348 added add/del/edit client/profile.pythml for glimd.
349 updated templates, showclients, and gliserv.
350
351 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
352 src/net/server/*:
353 stupid threading module...
354
355 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
356 AT: rc.conf -> conf.d/clock
357
358 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
359 src/GLIPortage.py:
360 show 'Calculating dependencies for ...' in subprogress bar at beginning of
361 emerge()
362 src/GLIArchitectureTemplate.py:
363 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
364 in the chroot
365 remove _quickpkg_deps() and _portage_best_{visible,version}()
366 src/GLIUtility.py:
367 fail immediately in validate_uri() if provided URI can't be parsed
368 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
369 debug code in spawn()
370 use lower-level os.read() instead of file.read() because python sucks
371 src/templates/x86ArchitectureTemplate.py:
372 basic subprogress reporting for partitioning
373 total_steps was 1 too high
374
375 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
376 src/GLIUtility.py:
377 move parse_vdb_contents() to GLIPortage
378 src/GLIPortage.py:
379 remove all symlink fixups
380 ignore 'dir' entries in CONTENTS
381 call tar with -p
382
383 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
384 AT: bootsplash is now gensplash
385 gliserv: add advanced_mode to shared_info
386 webgli: Added advanced mode. mostly just disables a few screens.
387
388 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
389 src/GLIPortage.py:
390 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
391 added emerge()
392 update sub-progress after each package is emerged
393 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
394 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
395 remove link if it exists before moving content into place
396 src/GLIArchitectureTemplate.py:
397 install_packages() now calls emerge() in GLIPortage
398 change all calls to self._emerge() to self._portage.emerge()
399 comment out all emerge status checking...using exceptions now
400 call copy_pkg_to_chroot() directly for livecd-kernel
401
402 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
403 src/GLIArchitectureTemplate.py:
404 remove add_pkg_to_world() and copy_pkg_to_chroot()
405 copy installer.log to installer.log.failed on install failure
406 src/GLIUtility.py:
407 added get_keymaps()
408 spawn() takes any False argument for chroot instead of just None
409 src/GLIPortage.py:
410 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
411 change copy_pkg_to_chroot() to work properly with use_root=False
412 figure PORTAGE_TMPDIR properly
413
414 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
415 src/net/server/html/*:
416 converted showclients, load/saveprofile
417
418 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
419 src/GLIPortage.py:
420 exclude packages already in chroot vdb from binary deplist
421 chroot to use best_version for chroot's vdb
422 src/runtimedeps.py:
423 accept ROOT via commandline instead of env
424
425 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
426 src/runtimedeps.py:
427 remove passing of ROOT
428 src/GLIPortage.py:
429 modify get_deps() to get deptree for each package and merge into final list
430 remove depgraph class
431 add debugging code to get_deps()
432 src/GLIArchitectureTemplate.py:
433 combine code for GRP/compile in install_packages() into one block
434 debugging code in install_packages()
435
436 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
437 src/runtimedeps.py:
438 initial commit
439 src/GLIPortage.py:
440 use separate script for GRP deps
441 remove calls to portage module
442
443 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 src/GLIPortage.py:
445 initial commit
446 move some of portage function from GLIAT
447 flipped around a few function args
448 src/GLIArchitectureTemplate.py:
449 revamp install_packages() for new GLIPortage
450
451 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
452 src/GLIArchitectureTemplate.py:
453 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
454
455 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
456 src/net/server/gliserv.py:
457 wrap generated code in a class to isolate it a bit better
458 302 redirects work
459 don't use cgi.escape() for <% %>
460 src/net/server/html/webgli/*:
461 load/save profile
462 src/GLIUtility.py:
463 change /sbin/lspci to just lspci
464
465 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
466 src/GLIClientController.py:
467 change ordering of statements in CC run() while loop to not go past the end
468 of the array
469 src/GLIArchitectureTemplate.py:
470 removed redundant bind mounts
471
472 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
473 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
474 added a diagram by blackace from last night.
475 added the glossary in RTF format.
476
477 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
478 x86AT: separated out emerge/configure from running of bootloader
479 added MBR drive support to lilo.
480 these changes will likely not work.
481 AT: added setup_and_run_bootloader step.
482
483 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
484 src/net/server/gliserv.py:
485 call generated code in a function
486 src/net/server/html/webgli/*:
487 include top/bottom
488 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
489 src/GLIClientCongifuration.py:
490 install mode magic
491
492 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
493 src/GLIClientController.py:
494 use GLIException when there's an import problem
495 added debug code to show install_steps
496 src/templates/amd64ArchitectureTemplate.py:
497 add . to import path
498 proper path this time: ../../templates
499 src/GLIArchitectureTemplate.py:
500 add _portage_best_version() function
501
502 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
503 added initial glossary and gimli diagram to the docs directory.
504 modify gli-dialog to allow editing of the install_profile after loading XML.
505
506 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
507 src/net/server/html/webgli/:
508 converted globaluse, localuse, networkmounts, portagetree, and stageselection
509 moved saveclientconfig stuff into clientconfig
510 moved saveconfigfiles into config files
511 converted etc_portage and makedotconf
512 converted bootloader and kernel
513 convert daemons, extrapackages, networking, review, services, timezone, users
514 src/net/server/gliserv.py:
515 proper 404 handling for .pyhtml extension
516 HTML escape <% %> stuff
517 work around python's sucky regexes
518 src/GLIInstallProfile.py:
519 allow set_{rsync,ftp,http}_proxy() to accept empty values
520
521 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
522 src/net/server/gliserv.py:
523 initial commit of Legolas templating engine
524 302 redirects
525 src/net/server/html/index.html, src/net/server/webgli_template.html:
526 minor changes for new code
527 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
528 initial commit of the conversion from the monolithic WebGLIHandler.py to the
529 one file per path Legolas goodness
530 partitioning[2-4] done
531
532 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
533 webgli: dhcp options in CC and post-install.
534 updated comparison chart.
535 webgli: etc/portage/* and distcc support added. not too-well tested.
536
537 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
538 webgli_template.html: valign=top on left side.
539 webgli: fix bootloader boot_device. now working.
540 webgli: CC proxy done. post-install proxy in progress.
541
542 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
543 src/net/server/webgli_template.html:
544 increase padding for content cell to 7px and add colspan=2
545
546 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
547 webgli: added graphic bar on top
548 webgli: added hover effects on the links on the left
549 webgli: re-rendered header_bg.png to stretch without artifacts
550
551 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
552 webgli: make.conf disabling fixes for dynamic_stage3
553 fixed portage snapshot browse popup
554 all changes tested.
555 webgli: add debug mode to CC screen. the screen still needs lots of work.
556
557 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
558 added debug mode question to gli-dialog
559 added CC proxies to CC networking for gli-dialog
560 webgli: fixed skip CC networking if connection active
561 webgli: portage snapshot defaults to CD
562 webgli: bootloader mbr drive selection
563 webgli: USE flags unselectable if dynamic_stage3
564 webgli: manual extra packages and save button.
565
566 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
567 src/GLIUtility.py:
568 change ping count to 2
569 docs/comparison.html
570 initial commit
571
572 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
573 src/templates/x86ArchitectureTemplate.py:
574 fix map() issue with grub code
575 replace kernel_names and initrd_names loops with one-liners
576
577 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
578 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
579 initial gli-dialog support for recommended partitioning layout and clear.
580 failure cleanup now an option for gli-dialog.
581 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
582 added comparison list and updated TODO!
583
584 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
585 src/GLIArchitectureTemplate.py:
586 fix to stage1() debug code
587 fix to stage2() debug code
588
589 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
590 some more bootloader code fixes. forgot boot_device != mbr_device.
591
592 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 src/GLIStorageDevice.py:
594 fix to unallocated space merging when last one is after part 4
595
596 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
597 src/GLIArchitectureTemplate.py:
598 small fix to debugging code in copy_pkg_to_chroot()
599
600 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
601 more bugfixes with bootloader code
602 gli-dialog side appears to work
603
604 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
605 initial adding of boot_device to backend.
606 initial boot_device support added to gli-dialog.
607 some fixes of my poor coding
608
609 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
610 converted gli-dialog to use the install_package_list.
611 gtkfe has already been converted by AllanonJL
612 new way working in gli-dialog now and added to webgli.
613 added set/get_boot_device() to IP
614
615 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
616 get_install_package_list added to InstallProfile. This can be used by the FEs
617
618 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
619 src/templates/x86ArchitectureTemplate.py:
620 call ls with '-1 --color=no'
621
622 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
623 added warning (#9) to GRP ppl about stage3 tarballs
624
625 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
626 src/GLIArchitectureTemplate.py:
627 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
628 confused
629
630 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
631 removed protocols from rc.conf screens
632 finished initial rc.conf and make.conf in webgli
633
634 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
635 src/net/server/gliserv.py:
636 add -h option to usage()
637 show time and request URI in debug mode
638 show client IP in debug mode
639 just use IP instead of trying to do a reverse lookup
640
641 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
642 src/net/server/gliserv.py:
643 'classier' 401 message
644 proper commandline parsing
645 help via -h
646 user/pass can be specificed via commandline option
647
648 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
649 src/net/server/gliserv.py:
650 basic HTTP auth
651
652 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
653 src/net/server/gliserv.py:
654 dynamic module reloading (yipee!)
655 send 'Last-Modified' header for real files
656 respond to HEAD with just headers
657 src/net/server/handlers/WebGLIHandler.py:
658 icons for drives
659
660 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
661 src/net/server/handlers/WebGLIHandler.py:
662 initial 'pretty' partition table display support
663 clicking partition in 'pretty' display works instead of radio buttons
664 radio buttons and pretty display work together
665 META redirect instead of javascript
666 pretty display stretches across entire screen
667 'Recommended layout' and 'Clear drive' functions
668 properly catch exceptions from do_recommended()
669 src/GLIArchitectureTemplate.py:
670 replace preinst, copy, postinst, rm steps with qmerge
671 whoops...that shouldn't have been commented out
672 create image_dir with -p in copy_pkg_to_chroot()
673 more generic of symlink crappiness
674 new copy_pkg_to_chroot() actually works now
675
676 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
677 src/GLIStorageDevice.py:
678 initial generic disk support
679 fixes for add_partition() code
680 src/net/server/handlers/WebGLIHandler.py:
681 added support for creating generic disks
682 add new partition working
683 save and delete partitions
684
685 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
686 webgli: Partitioning making progress.
687
688 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
689 src/GLIArchitectureTemplate.py:
690 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
691 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
692 dir) and works around /etc/gconf symlink problem
693
694 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
695 webgli: lots of updates. preliminary partitioning. extra packages works.
696
697 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
698 src/net/server/gliserv.py:
699 httpd now supports HTTPS and falls back to HTTP if not available
700 make fallback actually work
701 src/net/server/SecureXMLRPCServer.py:
702 SecureSocketServer is now threaded
703
704 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
705 src/net/client/gliclient.py:
706 try to use HTTPS for XMLRPC first and fallback to HTTP
707 pretend mode
708 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
709 HTTPS XMLRPC goodness from samyron
710 pass name of certificate
711
712 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
713 wegli: daemons and services screens done.
714
715 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
716 webgli: networking and users screens
717 added return_redirect to handler.py
718 loading and saving install/client profiles works for webgli now
719 Review also done
720
721 *GLI-0.2 (27 Oct 2005)
722
723 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
724 src/templates/x86ArchitectureTemplate.py:
725 properly check for bootloader emerge exist status with exitsuccess()
726 log output of grub install command
727 add --batch --no-floppy to grub command
728 grubinstallstring only gets logged if debug is on
729 src/GLIUtility.py:
730 update progress bar to 100% when process finishes
731
732 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
733 src/GLIClientController.py:
734 added debugging code for the interaction between the 2 threads via Event()
735 src/GLIUtility.py:
736 doubled the buffer size in spawn()
737 bump buffer size up to 16384
738 only report progress in 5% increments
739 src/GLIArchitectureTemplate.py:
740 kernelpkgs.txt support code
741 above disabled because it sucks
742 added add_pkg_to_world()
743
744 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
745 src/GLIArchitectureTemplate.py:
746 use tar | tar to copy files in copy_pkg_to_chroot()
747 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
748
749 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
750 DEBUGGING ADDED TO AT. verbose field added to CConfig.
751
752 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
753 src/net/server/gliserv.py:
754 / maps to index.html
755 look for actual files in html/
756 src/net/html:
757 new template
758 src/GLIUtility.py:
759 added parse_vdb_contents()
760 src/GLIArchitectureTemplate.py:
761 added copy_pkg_to_chroot()
762 added debug code to dynamic-stage3
763 switch dynamic-stage3 to new method
764 lots of bug fixes from adding debug code
765
766 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
767 webgli initial bootloader support + changed make.conf.
768 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
769
770 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
771 src/GLIUtility.py:
772 horrible tangled mess of code that is tarball unpacking subprogress display
773 add unpack progress to portage snapshot
774 use read() instead of readlines() in spawn()
775 only update progress bar for whole percents
776
777 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
778 src/templates/x86ArchitectureTemplate.py:
779 change call to 'grub' to use GLIUtility.exitsuccess()
780 add definition of 'build_mode' in _configure_lilo()
781 src/misc/updategtkfe, src/misc/updateglid:
782 fix so subshell is called in root shell
783
784 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
785 src/net/server/handlers/WebGLIHandler.py:
786 stage screen launches URI browser in sized window with various properties set
787
788 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 src/misc/updategtkfe:
790 updated to actually work
791 remove previous snapshot and extracted dir before downloading
792 src/misc/updateglid:
793 updated to actually work
794 src/templates/x86ArchitectureTemplate.py:
795 fixed bug where grub code was looking for 'root+root+file_name2'
796
797 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
798 src/net/server/handlers/WebGLIHandler.py:
799 URI browser
800 added mirror selection
801 src/GLIUtility.py:
802 ls via ssh strips off ending *
803
804 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
805 more updates to webgli. stage selection.
806
807 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
808 updated webgli with preliminary Network Mounts support.
809
810 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
811 GenDialog: string formatting and yes/no label fixes.
812 added WebGLI template for gliserv.py
813 added WebGLIHandler as well as a definition for it in gliserv.py
814 updates to the webgli files even though they won't be there for long.
815 Utility: remove exception for non-existant grppkgs.txt until the new livecd
816 goes public.
817
818 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
819 src/net/server/gliserv.py:
820 override dict to not be so anal
821 main server now loads separate module to handle requests
822 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
823 split out profile URLs into separate handler function
824 move handlers into subdirectory
825 add Welcome and Clients handlers
826
827 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
828 src/GLIUtility.py:
829 raise exception if password prompt received twice
830
831 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
832 src/GLIUtility.py:
833 removed rot13ify()
834
835 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 src/net/server/gliserv.py:
837 allow for param to be passed multiple times in GET
838 no XMLRPC functions return None
839 modify POST request parsing to only create a list if needed
840 fix GET request parsing so the list creation for multiple values works
841 src/net/client/gliclient.py:
842 various typo and type mismatch fixes
843 exit after exception
844
845 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/net/client/gliclient.py:
847 initial commit
848 pass MAC to XMLRPC functions
849 src/net/server/GLIServerProfile.py:
850 rename GLIClientsProfiles to GLIServerProfile
851
852 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
853 src/net/server/gliserv.py:
854 now handles POST requests
855 move majority of request handling code to common_handler() to reduce code
856 duplication
857 profile loading
858 client reg via XMLRPC goes into SharedInfo()
859 /showclients redesign
860 template fixes
861 allow handler functions to add/change headers
862 save profile
863
864 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
865 src/net/server/GLIClientsProfiles.py:
866 initial commit
867 src/net/server/template.html:
868 initial commit
869 src/net/server/gliserv.py:
870 add template mojo
871
872 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
873 src/net/server/gliserv.py:
874 XMLRPC mojo
875
876 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
877 src/GLIArchitectureTemplate.py:
878 add code in _edit_config() to comment line where variable is defined
879 previously
880 insert new line under previous definition of variable if it exists
881 small _edit_config() cleanup
882 src/GLIStorageDevice.py:
883 add clear_partitions() function
884 new sizes for recommended partition layout
885 automatically calculate swap size for recommended layout
886
887 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 src/templates/x86ArchitectureTemplate.py:
889 fat16 mojo
890
891 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
892 src/GLIStorageDevice.py:
893 prevent do_recommended() from being run twice
894 rewrite do_recommended() to be more robust
895 src/GLIArchitectureTemplate.py:
896 rework _edit_config() to not write duplicate entries
897
898 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
899 src/GLIStorageDevice.py:
900 added do_recommended() function to automatically created 256M/1G/* layout
901
902 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
903 src/gli-dialog.py: added set_distcc to the list
904 GenDialog: added set_distcc. untested.
905 IP: added install_distcc flag.
906 AT: added install_distcc function based on the flag. runs after build_kernel
907 changed AT spawn command for distcc for nodeps.
908
909 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
910 src/GLIUtility.py:
911 add rot13ify() function
912
913 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
914 src/GenDialog.py:
915 added a sentence of text. unchecking support added.
916
917 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
918 src/GLIUtility.py:
919 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
920 src/GenDialog.py:
921 still working on extra_packages. transformed the list to new format.
922 added GRP indication to list. untested.
923 TODO lists updated.
924 src/fe/dialog/gli-dialog.py:
925 spelling mistook.
926
927 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
928 src/GLIUtility.py:
929 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
930
931 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
932 src/GLIUtility.py:
933 add get_directory_listing_from_uri()
934 add http support to above
935 add ftp support to above
936 add scp support to above
937 src/GLIArchitectureTemplate.py:
938 "0" instead of 0 for key of single-element dict passed to _edit_config()
939
940 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
941 value_only -> only_value
942
943 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
944 gutted out all of etc_portage structure since it is now all handled by
945 etc_files
946
947 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
948 src/GLIArchitectureTemplate.py:
949 install_packages() sends progress update notifications
950 src/templates/x86ArchitectureTemplate.py:
951 increase sleep to 5s between format tries
952 src/GLIClientController.py:
953 pass 'self' to AT instead of 'self._pretend'
954
955 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
956 logger -> logger.log in x86AT
957
958 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
959 added set_etc_portage to IP. debugging gli-d's support for it.
960
961 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
962 src/templates/x86ArchitectureTemplate.py:
963 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
964
965 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
966 src/GLIArchitectureTemplate.py:
967 add _portage_best_version() function and rework install_packages() to allow
968 for future X of Y tracking
969 Use best_visible instead of best_version
970 tracked down and fixed missing = causing empty install extra packages
971 use = when emerging also
972 quickpkg hokey pokey
973 run _get_packages_to_emerge() again with -pk
974
975 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
976 src/ArchTemplate:
977 removed install_xorg_x11, and put the xorg.conf copying at
978 the end of install_packages.
979 added updateglid to /src/misc
980 updated all core files with new GPL notice and copyright statement.
981
982 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
983 src/GLIUtility.py:
984 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
985 a snapshot in /mnt/cdrom/snapshots/
986 get_snapshot_from_cd() adds file:// at the beginning
987 change calls to extra package special case functions to 'self.blah'
988
989 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
990 src/ArchTemplate: changed "voodoo".
991 changed order of portage sync methods. made a fallback to webrsync if
992 normal emerge sync fails.
993 removed get_sources_from_cd because it is obsolete.
994 add special cases to install_packages. remove fatal exception on package
995 install failure b/c the box will still be bootable.
996 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
997 handled in the FEs.
998 src/GenDialog: added a bunch of code for dealing with x11-based packages.
999 awaiting testing.
1000
1001 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1002 src/GLIStorageDevice.py:
1003 global try/except block around fs resizable detection code
1004 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1005 install-failed cleanup function
1006
1007 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1008 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1009
1010 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1011 GLIGenDialog:
1012 add drive choices for loaded configs.
1013 force snapshot for dynamic_stage3
1014 init the snapshoturi input to the cd snapshot if not already selected.
1015 if dynamic_stage3, skip the make.conf step.
1016 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1017 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1018
1019 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1020 src/GLIArchitectureTemplate.py:
1021 manually call MAKEDEV in stage3-dynamic code
1022 copy /etc/inittab.old to /etc/inittab in chroot
1023 src/GLIUtility.py:
1024 add beginning of validate_uri() function
1025 add file:/// support to validate_uri()
1026 single quotes when setting livecd password
1027
1028 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1029 src/GLIGenDialog.py:
1030 change getmountpoint() to get_mountpoint()
1031 src/misc/updategtkfe:
1032 committed script to automatically download latest snapshot and run gtkfe
1033 src/templates/x86ArchitectureTemplate.py:
1034 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1035 src/GLIArchitectureTemplate.py:
1036 give tmp_minor an initial value in mount_local_partitions so that the value
1037 remain from the previous drive
1038
1039 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1040 src/templates/x86ArchitectureTemplate.py:
1041 Fix _configure_lilo() for IP using GLISD stuff
1042 src/GLIArchitectureTemplate.py:
1043 install_cron_daemon() treats "none" specially
1044
1045 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1046 old patch from Steven Mertens to resolve bug #96642
1047 numerous asthetic changes to GenDialog, no real functionality changes though.
1048 strings renamed for global use if necessary.
1049 fix all three parts of bug 102291
1050 disable set_etc_portage until fully-written.
1051
1052 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1053 src/GLIClientController.py:
1054 lower-case http/ftp proxy envvars
1055
1056 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1057 src/GLIClientController.py:
1058 log end of pre_install steps to aid in debugging
1059 src/templates/x86ArchitectureTemplate.py:
1060 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1061
1062 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1063 src/GLIArchitectureTemplate.py:
1064 check to make sure that the device node we're wait for to exist isn't of
1065 type 'free'
1066
1067 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1068 src/GLIGenDialog.py:
1069 convert install_packages to list in set_extra_packages()
1070 check return code of checklist() call in "Manual" section
1071 *actually* fix the first problem
1072
1073 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1074 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1075 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1076
1077 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 src/GLIArchitectureTemplate.py:
1079 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1080
1081 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 Add CDATA support to SimpleXMLParser and add utility functions for it.
1083
1084 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1085 src/GLIArchitectureTemplate.py:
1086 Fix case where vixie-cron is specified as a full package atom, as we still
1087 don't want to run 'crontab /etc/crontab' for it.
1088
1089 *GLI-0.1 (3 Aug 2005)
1090
1091 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1092 add scp to list of is_uri() so GenDialog doesn't complain.
1093 fixed livecd-kernel bug in bootloader code.
1094 fixed gendialog for dynamic_stage3 instead of "networkless"
1095 change bootloader to allow for both initrd and initramfs.
1096 fix IP for dynamic_stage3.
1097 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1098
1099 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1100 Added full scp:// URI support to get_uri() in GLIUtility
1101 Remove "networkless" from dynamic stage3 if locic.
1102 Remove print statement from scp:// code.
1103 Change scp code to check for "assword: " instead of "Password:"
1104 Fix post-install network code to create net.eth1+ symlink correctly
1105 Check to make sure pkg can be split on / and some debugging code
1106 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1107 SimpleXMLParser handles True/False/None correctly now
1108 Comment out above fix
1109 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1110
1111 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1112 Removed a FIXME in the GLIClientConfiguration that is no
1113 longer needed.
1114
1115 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1116 Default to x86 in ClientConfig
1117 Typo in build-a-stage3 code.
1118 Remove MAKEDEV call in build-a-stage3 postscript.
1119
1120 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1121 Rewrote init of IP for gli-d. Other GenDialog updates.
1122 allow network_type to be None in CConfig.
1123
1124 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1125 Add _dynamic_stage3 option to IP.
1126 Add check for that option to dynamic stage3 code in ArchTemplate.
1127 Fix code to determine default route in get_eth_info() in GLIUtility.
1128 Fix serialization of dns-servers in ClientConfig.
1129
1130 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1131 changed default values of cron/logger in IP.
1132 moved GenDialog IP init out to the individual files. gli-dialog's version
1133 will change quite a bit.
1134
1135 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1136 added ppcArchTemplate. blank now. working on yaboot.
1137 modified ArchTemplate for amd64 and ppc custom kernels.
1138 skeleton implementation of _configure_yaboot.
1139 small fixes to other templates.
1140
1141 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1142 GenDialog updates. changed comment in IP.
1143
1144 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1145 src/GLIInstallProfile.py:
1146 Fix codeman's screwup of changing the service seperator to ',' in the parser
1147 without changing it in the serialization code! Also document this in a
1148 comment so you find it easier. Everybody needs to make sure they update
1149 their install profiles!
1150
1151 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1152 src/GLIArchitectureTemplate.py:
1153 Fix casting of list to string and concat of None with string, as well as
1154 commented prototype of checking that mounting actually worked (found a case
1155 where mount can return success, but the mount won't be done).
1156
1157 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1158 src/templates/x86ArchitectureTemplate.py:
1159 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1160 checking for the device, and sleeping 1 second each time.
1161
1162 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 src/templates/x86ArchitectureTemplate.py:
1164 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1165 bootloader works again. Also rename _install_{grub,lilo} to
1166 _configure_{grub,lilo} since they don't install the loaders anymore
1167 themselves.
1168
1169 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1170 fix global USE flags to not include the arch types at the end.
1171 updates to GenDialog and gli-d.
1172
1173 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1174 fixing bootloader code for no initrd and initrd->initramfs naming change.
1175
1176 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1177 Proper comments and parameters to GLIException in install_mta()
1178 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1179 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1180 list_tarball_from_mirror() to eliminate blank last item.
1181
1182 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1183 Added stage3 generation code.
1184
1185 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1186 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1187 Mild changes to GenDialog.
1188
1189 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1190 Remove separate install step configure_rc_conf() since it's handled by
1191 update_config_files()
1192 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1193 function is called twice on the same file.
1194
1195 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1196 Missing \ in sed in _get_packages_to_emerge()
1197 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1198 Check in _quickpkg_deps() to ignore blank package names returned from
1199 _get_packages_to_emerge()
1200
1201 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1202 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1203 in the dialog.py gauge code.
1204
1205 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1206 Add code to update_config_files() to go through etc_files and update stuff.
1207 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1208 Only use float() in partition xml parsing code if type == "free"
1209
1210 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1211 finished almost all internationalization of GenDialog.
1212 attempt at fixing rc.conf function. moved 3 generate functions out of
1213 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1214 added dialog.py to the fe/dialog directory so it actually gets used.
1215
1216 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1217 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1218
1219 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1220 fix extra entry in list_mirrors()
1221 beginning internationalization runthrough.
1222
1223 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1224 added dialog.py to /src temporarily until it gets accepted upstream.
1225 fix for unused value in form in dialog.py and changed heights.
1226 fix GenDialog forms.
1227
1228 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1229 Changed hostname/domainname for new baselayout.
1230 Changed _add_to_runlevel errors to logs.
1231 Updated TODO list to show status of GenDialog
1232 More updates to GenDialog including two checklists that probably won't work.
1233 update IP to use comma-separated list instead of space separated for services.
1234
1235 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1236 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1237 GenDialog as it gets closer to completion.
1238
1239 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1240 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1241 instead of int() in add_partition_device_partition() for minor (closes 96804)
1242
1243 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1244 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1245 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1246 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1247
1248 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1249 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1250 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1251 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1252 Fix undefined variable 'output' issue in spawn().
1253
1254 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1255 More updates to GenDialog and gli-d.
1256
1257 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1258 Modify list_mirrors() to return a list of mirror URL/name pairs.
1259
1260 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1261 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1262 get subarch.
1263
1264 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1265 Backend partitioning will create disklabel is none exists. Installprofile
1266 defaults to "" now instead of "msdos" for disklabel type. Fix for
1267 mount_local_partitions() to remember device along with minor in the
1268 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1269 add else block to log unsupported netmount types to mount_network_shares()
1270
1271 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1272 src/GLIArchitectureTemplate.py:
1273 Refactor kernel_compile common stuff, fix 2.4 build process.
1274 src/fe/cli/clife.py:
1275 Logging system.
1276 src/GLIUtility.py, src/GLIStorageDevice.py:
1277 Add comments about re-writes needed for boxes without sysfs.
1278
1279 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1280 src/GLIArchitectureTemplate.py:
1281 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1282 'make dep' call for custom compile. build_mode support for prepare-only and
1283 none types completed. custom compile function chains shell functions in
1284 spawned script, to allow for catching all errors.
1285
1286 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1287 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1288 and GenDialog. other gendialog updates as well. kernel updates untested.
1289
1290 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1291 src/GLIInstallProfile.py:
1292 Change structure of etc-portage stuff. The serialization was broken before my
1293 last commit, and I am the only person that's ever used it. The new schema is
1294 as follows:
1295 <etc-portage>
1296 <file name="package.mask"/>
1297 <file name="package.unmask">
1298 <entry atom="sys-kernel/openmosix-sources"/>
1299 </file>
1300 <file name="package.use">
1301 <entry atom="sys-libs/db">
1302 -java
1303 </entry>
1304 <entry atom="dev-libs/cyrus-sasl">
1305 -ldap
1306 </entry>
1307 </file>
1308 </etc-portage>
1309
1310
1311 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1312 src/GLIInstallProfile.py:
1313 Add new entry for gli-profile/kernel-build-method item. Add missing
1314 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1315 keys in the same order.
1316
1317 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1318 src/GLIArchitectureTemplate.py:
1319 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1320 was repeatedly appended to make.conf.
1321
1322 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1323 src/GLIArchitectureTemplate.py:
1324 Put some Linux-2.6 specific code under a if statement. Store list of
1325 successfully mounted swap device for using swapoff. Add proper error checking
1326 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1327 'file'. Clean up some redundant code (thanks to pychecker).'
1328
1329 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1330 Fix typos: get_extended() instead of get_extended_partition(). Added
1331 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1332 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1333
1334 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1335 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1336 in add_network_interface.
1337
1338 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1339 src/GLIArchitectureTemplate.py:
1340 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1341 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1342 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1343 prepare_chroot.
1344
1345 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1346 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1347 +src/fe/installer-gtk:
1348 Add new automated CLI frontend. Add scripts that are the intended means to
1349 use each frontend.
1350
1351 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1352 src/GLIClientController.py:
1353 Add null type to network config, for cases where the interface is already up
1354 and should not be touched (netboot for example).
1355
1356 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1357 src/GLIArchitectureTemplate.py:
1358 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1359 string!. Try to use binary packages if available by default.
1360
1361 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1362 src/GLIArchitectureTemplate.py:
1363 More error checking for _add_to_runlevel, to ensure that the init script
1364 actually exists before we try to add it. set_services phase must take place
1365 after the package installation, otherwise the init scripts might not exist.
1366 Find the correct init script for the cron and logging daemons, and add that
1367 instead of the package atom.
1368
1369 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1370 src/GLIArchitectureTemplate.py:
1371 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1372 usage of 'file' to 'contents' for the variable name, as it shadows
1373 __builtin__.file.
1374
1375 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1376 src/GLIArchitectureTemplate.py:
1377 Add MTA install code, and include MTA install phase. Ensure
1378 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1379 for 'none' kernel config for build_kernel phase. Put kernel_script in
1380 /var/tmp instead of /root for build_kernel phase.
1381
1382 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1383 Rename mta variables to match syslog/cron variables.
1384
1385 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1386 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1387 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1388 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1389 src/templates/.cvsignore, src/tests/.cvsignore:
1390 Refactor partition formatting again to include error checking. Allow 'none'
1391 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1392
1393 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1394 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1395 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1396 only have a single spawn call.
1397
1398 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1399 refixed samyron's fix of set_architecture_template.
1400
1401 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1402 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1403 be executable.
1404
1405 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1406 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1407 error checking when you call set_architecture_template.
1408
1409 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1410 moved the mkfsopts input to the partition options menu instead of the during
1411 the creation process. updated GenDialog to say it supports reiserfs v3.
1412
1413 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1414 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1415 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1416 Add support for other partition types to dialogfe.
1417 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1418 avoid integer overflows and wraparounds.
1419
1420 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1421 Removed start/end from XML output and added mkfsopts to partitioning info.
1422 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1423 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1424 in GLIClientConfiguration. Change from .1 and .9 to constants for
1425 partitioning. Fix free space overwriting bug. Remove a few unused functions
1426 from rewrite. Fix call to get_partition_at()
1427
1428 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1429 Updates to GenDialog and dialogfe.
1430
1431 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1432 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1433
1434 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1435 more GenDialog updates to partitioning.
1436
1437 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1438 Indenting issue in GLISD/get_ordered_partition_list.
1439 updates to GenDialog partitioning and added default UTC for timezone in IP.
1440
1441 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1442 Added GLISD.get_model()
1443
1444 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1445 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1446 More updates to GenDialog :)
1447
1448 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1449 Added get_interface_realname() function.
1450
1451 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1452 Added auto-save of CConfig and copying to new /root after install.
1453 yet even more GenDialog updates.
1454
1455 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1456 removed print statement from GLISD. more updates to GenDialog.
1457
1458 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1459 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1460 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1461 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1462 places in GLIClientConfiguration.
1463
1464 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1465 Fix mount_local_partitions(), configure_fstab(), and
1466 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1467 A few more fixes for templates/x86Archtemplate
1468
1469 27 May 2005; Preston Cody <codeman@gentoo.org> :
1470 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1471 a work in progress.
1472
1473 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1474 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1475 directly. GLISD can now handle data imported from XML.
1476
1477 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1478 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1479 handle blank (no disklabel) disks.
1480
1481 20 May 2005; Preston Cody <codeman@gentoo.org> :
1482 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1483 up, documented, and separated out serialization and grouped all sections.
1484
1485 19 May 2005; Preston Cody <codeman@gentoo.org> :
1486 Reorganization of ClientConfiguration and gutting of unused functions.
1487 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1488
1489 18 May 2005; Preston Cody <codeman@gentoo.org> :
1490 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1491
1492 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1493 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1494 partitioning. CC serializes install profile to disk and prepare_chroot()
1495 copies it into /mnt/gentoo/root
1496
1497 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1498 Moved URI parsing into new function parse_uri()
1499
1500 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1501 Added XMLParser module.
1502
1503 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1504 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1505 Minor fix to is_uri() regex to allow hyphens in hostname.
1506
1507 12 May 2005; Preston Cody <codeman@gentoo.org> :
1508 Updated finishing_cleanup for new unmounting method from agaffney.
1509
1510 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1511 Fix GLILogger to use correct time format string. Fix _edit_config() to
1512 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1513 unicode support to is_realstring().
1514
1515 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1516 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1517 return value instead of non-zero. Add code to output a traceback to the
1518 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1519 instead of --nocolor.
1520
1521 10 May 2005; Preston Cody <codeman@gentoo.org> :
1522 Added GLIGenDialog.py to make a generic class for the dialog functions that
1523 can be used by both dialogfe and the netfe/be. updated both for new filename.
1524 date changes. 2004->2005.
1525
1526 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1527 Removed 'quiet=True' from spawn() calls
1528
1529 10 May 2005; Preston Cody <codeman@gentoo.org> :
1530 Updated GLIUtility with patches from chotchki. Also added documentation
1531
1532 9 May 2005; Preston Cody <codeman@gentoo.org> :
1533 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1534 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1535 from bug #89683, mostly touchups.
1536
1537 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1538 GLIStorageDevice cleanup patch from bug #91761
1539
1540 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1542 _edit_config(). Error logging casts 'error' to str
1543
1544 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1545 Exceptions received in CC are logged before being passed to the FE. Added
1546 code to CC to handle exceptions *not* thrown by the installer itself.
1547
1548 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1549 get_max_mb_for_resize() returns -1 if not self.resizeable
1550
1551 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1552 More dirty rsync hacks :-/
1553
1554 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1555 Patches from chotchki (bug #90325) to improve CC networking. untested.
1556
1557 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1558 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1559 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1560 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1561 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1562 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1563 _get_packages_to_emerge()
1564
1565 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1566 Added group-adding code to set_users in ArchTemplate
1567
1568 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1569 Added post-install script code
1570
1571 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1572 Fixed encapsulation issues in GLIClientController (bug #90141)
1573
1574 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1575 Update resizing code in GLIStorageDevice
1576
1577 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1578 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1579
1580 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1581 Reverted change to ArchTemplate and added support for commented line in old
1582 code.
1583
1584 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1585 Changed _edit_config() to modify value in-place instead of commenting out and
1586 adding the new value to the end of the file.
1587
1588 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1589 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1590 Also updated TODO list.
1591
1592 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1593 Use blackace's one-liner to add comments for all function for use with
1594 pythondoc.
1595
1596 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1597 Moved 'end >= device_sectors' check out of loop to check for next partition's
1598 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1599 Partitioning code now tracks start/end of extended for placing logicals. End
1600 point of logical is now adjusted along with start.
1601
1602 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1603 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1604 the way of partitioning from a blank disk. Add int() around access to minor
1605 key in partition information due to new partition code leaving them as float.
1606
1607 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1608 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1609
1610 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1611 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1612
1613 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1614 Added support for DHCP options and MAC addresses in the InstallProfile.
1615
1616 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1617 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1618 sed to properly strip out junk.
1619
1620 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1621 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1622 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1623
1624 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1625 Fixed indent problem in GLICController
1626
1627 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1628 Check for disklabel type "loop" and use the device name without a minor.
1629
1630 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1631 Remove /tmp/compile_output.log and /var/log/install.log when install is
1632 complete. Added code to (hopefully) keep 2nd thread running after install.
1633 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1634 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1635 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1636
1637 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1638 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1639 when unpacking tarball.
1640
1641 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1642 rewrote filesystem_tools. looks like it works so ripping out all the old
1643 filesystem_tools code.
1644
1645 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1646 Changed the print statements to logging in the partitioning BE code.
1647 the logger may need to be imported to the x86archtemplate. unknown yet.
1648 Added the finishing_cleanup function.
1649 added a fix to the logger from BenUrban
1650
1651 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1652 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1653 URIs. The blank uri check has been commented out.
1654 ripped out error checking of set_services. this is done by _add_to_runlevel.
1655
1656 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1657 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1658
1659 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1660 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1661 the install profile if available. Commented out spawn() debugging prints
1662
1663 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1664 small changes to setup_network_post. moved adding to runlevel of net.x to
1665 after the device gets symlinked. added domainname runlevel command.
1666
1667 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1668 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1669 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1670 spawn() call in livecd-kernel code to pass environment variables.
1671 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1672 the install profile if available.
1673
1674 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1675 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1676 to handle installing the livecd kernel into the new system.
1677
1678 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1679 should emerge hotplug and coldplug before adding them to runlevel.
1680
1681 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1682 took chroot out of grub_install command.
1683
1684 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1685 Changed chroot wrapper code in spawn() to write the wrapper the python way
1686 instead of the bash way to avoid quote conflicts. Added
1687 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1688 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1689 as it breaks the piping.
1690
1691 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1692 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1693
1694 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1695 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1696 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1697 GLIInstallProfile.
1698
1699 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1700 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1701 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1702 into /mnt/gentoo in prepare_chroot()
1703
1704 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1705 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1706 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1707 to start/end sectors
1708
1709 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1710 Add 2>&1 to cmd in spawn()
1711
1712 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1713 Modified GLIUtility.exitsuccess() to work with return value from
1714 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1715 creates wrapper script for commands run inside chroot so multiple commands
1716 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1717 for the generated script from spawn()
1718
1719 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1720 Removed default values for stage tarball URI and portage tree URI from
1721 InstallProfile. These should be set by the FEs. also added services step to
1722 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1723 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1724
1725 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1726 Small fix for setting the default gateway. Also added feature to dialogfe.
1727
1728 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1729 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1730
1731 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1732 Fixed a bunch of true -> True typos. lots of em
1733 only write new resolv.conf if there are dns servers listed.
1734
1735 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1736 Commented out 'display_on_tty8=True' in start_portmap()
1737
1738 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1739 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1740
1741 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1742 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1743 lang parameter to __init__()
1744
1745 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1746 updates to TODO list.
1747
1748 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1749 Initial code for quickpkg GRP support. Fix loop to grab packages from
1750 'emerge -p blah'
1751
1752 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1753 check for dhcp in the network stuff and emerge it if it is.
1754 added quickpkg to TODO list
1755
1756 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1757 Changed the raising of 'warning' exceptions to a simple log of the error
1758 so that the installer can continue.
1759
1760 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1761 Some big changes. First, changed most output to display_on_tty8.
1762 Second, added log lines to all templates. Some smaller fixes such as typos.
1763 Also did some cleanups of old commented lines.
1764
1765 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1766 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1767 Undo change with fix. Escaping fix in GLIStorageDevice.py
1768
1769 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1770 more updates to TODO list. hopefully we'll soon start removing items instead
1771 of adding them.
1772
1773 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1774 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1775
1776 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1777 updated TODO list. (again)
1778
1779 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1780 changed output of portmap start to display_on_tty8.
1781 fixed bootloader for udev and multiple kernels
1782 fixed custom kernel config (again)
1783
1784 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1785 changed default value of CC._enable_ssh to True because this is smart.
1786 added code to allow custom kernel .config. may be unstable and break. sorry.
1787
1788 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1789 partition() now waits until after it checks for partition flags before delete
1790 the partitions :P
1791
1792 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1793 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1794 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1795 blank.
1796
1797 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1798 Various fixes related to the add_users function. Still not yet finished.
1799 Added things to the TODO list. Lets start using that!
1800
1801 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1802 Added code to x86Template to format newly created partitions. Also added
1803 some error checking code. GLIStorageDevice passes 'minor' with data to
1804 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1805 mounting code.
1806
1807 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1808 Took out unnecessary setting of random livecd root password. the cd already
1809 sets it randomly.
1810
1811 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1812 Took out an unneeded step from CC's run()
1813
1814 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1815 Attempt at detecting and adding windows partitions to lilo.
1816
1817 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1818 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1819 partition. fixed misc exit_status => exitstatus typo.
1820
1821 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1822 Added basic code for resizing filesystems with pyparted. Fixed code for
1823 resizing ntfs and ext2/3.
1824
1825 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1826 Fixed partition() in x86Template so that it scans through logicals and deletes
1827 before deleting containing extended partition. Also clears partition table to
1828 be safe before third pass.
1829
1830 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1831 Added mount_network_shares. not able to test it from this computer.
1832 will test when i get back to school.
1833 also added start_portmap to the client_controller as an always-do.
1834 agaffney says this is needed for NFS mounts to work.
1835
1836 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1837 Partial rewrite of partitioning code in x86Template. No longer shells out to
1838 parted to perform actions, now uses all pyparted calls. Code "works" in a
1839 test, but still needs lots of TLC. Also modified tests/install.py to work
1840 with x86Template and GLIClientConfiguration.
1841
1842 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1843 Initial move of partitioning code from ArchTemplate to x86Template.
1844
1845 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1846 Added grp_install and services to InstallProfile. forgot about the set_root_password
1847
1848 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1849 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1850 agaffney. Test Install ran very well (skipping partitioning).
1851
1852 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1853 My mid-day update. rewrote mount_local_partitions for order of mounting.
1854 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1855 partition format. fixed a few _edit_configs. some may still have eluded me.
1856
1857 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1858 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1859 to test it.
1860 Just finished mount_local_partitions in GLIArchitectureTemplate
1861
1862 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1863 Added get_num_sectors() to GLIStorageDevice.
1864
1865 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1866 GLIStorageDevice now tracks partition boundaries in sectors instead of
1867 cylinders.
1868 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1869 from GLIInstallProfile.
1870
1871 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1872 GLIStorageDevice returns "unknown" instead of "" for get_type()
1873
1874 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1875 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1876 actually work. Commented out resizability checking code for speed.
1877
1878 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1879 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1880 in GLIStorageDevice at the suggestion of plors
1881
1882 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1883 Added a function to GLIUtility to pull a value from a make.conf-style config
1884 file. Minor type fix to GLIInstallProfile.py
1885
1886 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1887 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1888 Separated network mounts from partition data structure in GLIInstallProfile
1889
1890 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1891 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1892 can be resized.
1893
1894 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1895 Added some of the final functions to GLIInstallTemplate.
1896 Yes this project is still active despite rare use of the Changelog!
1897
1898 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1899 Added the GLIPartitionTools.py file. This is a temporary insertion of
1900 partitioning tools that will eventually go into their own package.
1901
1902 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1903 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1904 run-time for the program). Added __init__(install_profile,
1905 client_configuration) to GLI.InstallProfile. This sets install_profile and
1906 client_configuration once so as to avoid constantly passing stuff every time
1907 we call a method.
1908
1909 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1910
1911 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1912 config files without messing up all the other stuff in them. This will be
1913 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1914
1915 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1916
1917 Added GLI.InstallTemplate framework. This is not yet functional. However,
1918 it does have a few basic things. I added two private methods. One is
1919 _depends(). This will be used for dependency checking (ie. unpacking a
1920 tarball requires that partitioning has been done). The other is
1921 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1922 instead of being run in the liveCD environment, it runs in the chroot. This
1923 requires a bit of fork() magic, so I isolated the code. Hope to work more
1924 this week to get this class formed...
1925
1926 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1927 Added SAX parsing. Made GLI.InstallProfile a subclass of
1928 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1929 to be lists instead of tuples to allow for easier modification (mutable,
1930 rather than immutable objects). Updated existing pydoc and added more.
1931 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1932 GLI.py a bit. Fixed all accessors to use self references.
1933 Added initial unit test code.
1934
1935 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1936 Added initial changelog. Setting up the basic structure of the CVS repository
1937 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1938 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20