/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1484 - (show annotations) (download)
Sun Jul 30 20:01:14 2006 UTC (8 years ago) by codeman
File size: 80240 byte(s)
  src/GLIClientConfiguration.py:
  adding 'None' with capital N so that the frontends can parse the network type

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.668 2006/07/30 20:01:13 codeman Exp $
4
5 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 skip blank entries/files in update_config_files()
8
9 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
10 src/templates/x86ArchitectureTemplate.py:
11 move logical clipping logic a bit
12
13 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
14 I've commented out most of the code that used launch. It wasn't working and
15 we don't have the time to fix it before the release. I'll look into it after
16 the release and make it more robust and flexible.
17
18 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
19 src/templates/x86ArchitectureTemplate.py:
20 clip logical partition at end of extended
21
22 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
23 src/GLIInstallProfile.py:
24 Added a few more applications to the list of extra packages to be merged,
25 all from various GRP sets.
26
27 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
28 Added launch variable to the end of each try-run with auth, which should
29 cause this to function properly. Of course, more testing is needed.
30
31 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
32 Fix a missed space in the installer script.
33
34 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
35 src/GLIClientConfiguration.py:
36 adding 'None' with capital N so that the frontends can parse the network type
37
38 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
39 src/GLIClientController.py:
40 log version-stamp
41
42 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
43 Updated the installer script to allow specifying the front-end to run from
44 the command line. Currently, it only supports dialog and gtk. It still needs
45 some testing, however.
46
47 9 July 2006; Preston Cody <codeman@gentoo.org>
48 src/GLIGenDialog.py:
49 make lilo only show up for x86 if non-networkless
50
51 25 Jun 2006; Preston Cody <codeman@gentoo.org>
52 src/GLIGenDialog.py:
53 adding code to auto-add doscsi if a scsi drive detected.
54 this code is also in the gtkfe already
55
56 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
57 src/GLIPortage.py:
58 pass proper PORTAGE_TMPDIR
59
60 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
61 src/GLIUtility.py:
62 fix list_mirrors() to ignore <uri> lines that don't end on the same line
63
64 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
65 Added code to the mta step in AT to parse the install packages list and
66 look for mtas and if it finds it emerge it.
67 Initial attempt at moving extra_packages early in the setup to only show
68 local USE flags relating to those packages.
69 .. abandoned local USE project. no right way to do it.
70
71 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/GLIUtility.py:
73 minor tweak to regex for parsing mirrors.xml
74
75 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/templates/x86ArchitectureTemplate.py:
77 make use of strict_start and strict_end in partition recreation
78
79 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
80 src/templates/x86ArchitectureTemplate.py:
81 add strict_start and strict_end parameters to _add_partition()
82 add _find_current_minor_for_part() function to help with resizing
83 fix logical/extended logic in _partition_delete_step()
84 in _partition_resize_step(), delete, recreate at new size, resize, delete
85 call resize2fs with no size argument so it fills entire partition
86 more logging
87 only delete, recreate, resize, delete if growing
88 pass new size to resize2fs in K
89
90 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIStorageDevice.py:
92 call reorder_minors() from tidy_partitions() instead of
93 set_partitions_from_disk()
94 add code to reorder_minors() to take extended/logical into consideration with
95 non-free partitions
96
97 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
98 added a check of the length of the directory in /usr/src if under 6 characters
99 should fix bug 131809
100
101 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
102 src/GLIArchitectureTemplate.py:
103 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
104 and livecd-kernel
105
106 16 Apr 2006; Preston Cody <codeman@gentoo.org>
107 src/GLIGenDialog.py:
108 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
109
110 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIInstallProfile.py:
112 change kernel-modules to not be so stupid
113
114 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
115 GLIMD: fix display problem with execute.pyhtml.
116 make tables better.
117
118 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIInstallProfile.py:
120 fix handling of int/float for minor
121 src/templates/x86ArchitectureTemplate.py:
122 save/restore partition name
123 src/GLIStorageDevice.py:
124 support for partition name
125
126 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
127 touchups to add_profile in GLIMD to link to webgli
128 add a save to GLIMD profile button in webgli's saveprofile
129 gliserv.py:
130 initial attempt at custom networking info per client. hostname support only.
131
132 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
133 src/net/server/html/webgli/partitioning[234].pyhtml:
134 small fixes for new partioning code
135
136 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
137 src/GLIClientController.py:
138 record PID of secondary thread
139
140 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
141 src/GLIGenDialog.py:
142 small fix for new partitioning code
143
144 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
145 src/GLIStorageDevice.py:
146 add get_devnode()
147 fix up detect_devices() to detect cciss/ida arrays
148 src/templates/x86ArchitectureTemplate.py:
149 use get_devnode() instead of figuring out the devnode
150 skip first 3 steps if partition layout hasn't changed
151 wipe disk and create new disklabel before recreating partitions
152 src/GLIArchitectureTemplate.py:
153 use get_devnode() in local mount and fstab stuff
154
155 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
156 src/GLIStorageDevice.py:
157 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
158
159 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
160 src/templates/x86ArchitectureTemplate.py:
161 continue breakup/cleanup of partitioning code
162
163 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
164 src/GLIStorageDevice.py:
165 set disklabel to default for arch when clearing the partition table
166 src/templates/x86ArchitectureTemplate.py:
167 complete rewrite of first and second passes
168
169 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
171 allow iterating over Device object to get partitions
172
173 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIStorageDevice.py:
175 allow access to Device object like a dict
176
177 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIStorageDevice.py:
179 allow access to Partition object like a dict
180
181 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/templates/x86ArchitectureTemplate.py:
183 fail if any filesystems are mounted on the device being partitioned
184
185 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
186 src/GLIStorageDevice.py:
187 reorder minor numbers when loading partitions from disk to match the physical
188 partition order
189
190 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
191 src/GLIStorageDevice.py:
192 overhaul for supporting mac disklabels and partitions out of disk order
193 remove free space from inside extended partition when extended is removed
194
195 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
196 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
197 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
198 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
199 Added bash scripts, icons, and desktop entries from the ebuild to make my
200 life easier.
201
202 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
203 src/GLIStorageDevice.py:
204 raise an exception if the existing partitions are out of disk order
205 look for minors out of order instead of disk position
206
207 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
208 src/fe/dialog/gli-dialog and src/GLIGenDialog:
209 added networkless mode to gli-dialog.
210
211 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
212 src/templates/x86AT:
213 add windows detection code for grub. untested.
214
215 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
216 src/templates/x86ArchitectureTemplate.py:
217 bootloader and partitioning external commands log to compile_output.log
218 wait for device node to exist before resizing
219 add -v to ntfsresize command
220 src/GLIStorageDevice.py:
221 return start/end with ip structure
222 pad min ntfs size by 50 MB just to be safe
223 src/GLIArchitectureTemplate.py:
224 only install filesystem tools for partitions with a mountpoint
225
226 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
227 add error catching and text to saving profile dialogs
228
229 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
230 src/GLIPortage.py:
231 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
232 src/templates/x86ArchitectureTemplate.py:
233 fix checks for changed partitions so they will actually get deleted
234
235 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
236 src/GLIClientController.py:
237 slightly better error handling for pre-install failures
238
239 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/templates/x86ArchitectureTemplate.py:
241 proper return code checking for ext2/3 resizing
242
243 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/GLIClientController.py:
245 accept 'none' as well as 'null' for network type
246 src/GLIArchitectureTemplate.py:
247 ignore extended partitions in mount_local_partitions()
248 src/templates/x86ArchitectureTemplate.py:
249 use get_ordered_partition_list() instead of keys().sort() for new_part_list
250 check to make sure start sector for primary isn't less than end sector for
251 previous extended
252 src/GLIClientController.py:
253 write dns servers to /etc/resolv.conf
254
255 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
256 src/GLIPortage.py:
257 copy_pkg_to_chroot() uses compile_output.log for command output
258
259 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
260 only keep a 1000 line 'scrollback' buffer for the compile output and log file
261
262 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
263 src/GLIPortage.py:
264 add code make GLIPortage.py capable of being run stand-along for dynamic
265 stage3 generation and copying packages in a GRP-ish way
266 grp code fixups
267
268 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
269 src/GLIPortage.py:
270 ignore blank packages passed to get_deps() and emerge()
271
272 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
273 src/GLIUtility.py:
274 add get_chosts() function
275
276 *GLI-0.3 (12 Feb 2006)
277
278 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
279 src/templates/x86ArchitectureTemplate.py:
280 pull old start/end sector values from somewhere that actually has them
281 add logic for extended partition to code that makes sure new end sector
282 doesn't overlap start sector of next partitions
283 don't freak out if partition can't be deleted
284
285 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
286 src/GLIPortage.py:
287 run env-update at the end of copy_pkg_to_chroot()
288
289 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
290 src/templates/x86ArchitectureTemplate.py:
291 I'm a complete fscking dumbass. I recorded the end sector for partitions that
292 weren't being touched, but I never used it when recreating them...the end was
293 calculated from the size in MB instead :/
294
295 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 src/GLIArchitectureTemplate.py:
297 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
298 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
299 src/GLIPortage.py:
300 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
301 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
302 'resized' flag
303
304 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
305 src/GLIPortage.py:
306 short circuit and check vdb directly if package begins with '='
307
308 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
309 added more packages to extra_packages list in IP
310
311 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
312 src/templates/x86ArchitectureTemplate.py:
313 10 tries to create filesystem instead of 3
314 src/GLIPortage, src/GLIArchitectureTemplate.py:
315 ignore_missing flag for copy_pkg_to_chroot()
316
317 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
318 src/GLIPortage.py:
319 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
320
321 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
322 src/net/server/gliserv.py:
323 fix handling of 404 for real files
324 src/net/server/GLIServerProfile.py:
325 look for 'hostname' in attributes instead of 'name'
326
327 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
328 src/SimpleXMLParser.py:
329 initial support for 'include' in XML files
330 src/GLIStorageDevice.py:
331 initial support for %
332 src/GLIClientController.py:
333 add debugging statements to pre-install steps
334
335 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
336 webgli/configfiles:
337 check for key in etc_files['rc.conf'] to fix key error
338 webgli/timezone: small fix.
339 webgli/extrapackages: list-type fix
340 webgli/services: same
341 glimd: add/edit_client updates.
342
343 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
344 added configure.pyhtml to glimd. minor changes
345 to top and add_client. fixed up showargs.
346 added execute.pyhtml
347 changed register clients line in gliserv for name->hostname.
348 updated TODO.
349
350 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
351 src/net/server/*:
352 added add/del/edit client/profile.pythml for glimd.
353 updated templates, showclients, and gliserv.
354
355 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
356 src/net/server/*:
357 stupid threading module...
358
359 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
360 AT: rc.conf -> conf.d/clock
361
362 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
363 src/GLIPortage.py:
364 show 'Calculating dependencies for ...' in subprogress bar at beginning of
365 emerge()
366 src/GLIArchitectureTemplate.py:
367 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
368 in the chroot
369 remove _quickpkg_deps() and _portage_best_{visible,version}()
370 src/GLIUtility.py:
371 fail immediately in validate_uri() if provided URI can't be parsed
372 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
373 debug code in spawn()
374 use lower-level os.read() instead of file.read() because python sucks
375 src/templates/x86ArchitectureTemplate.py:
376 basic subprogress reporting for partitioning
377 total_steps was 1 too high
378
379 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
380 src/GLIUtility.py:
381 move parse_vdb_contents() to GLIPortage
382 src/GLIPortage.py:
383 remove all symlink fixups
384 ignore 'dir' entries in CONTENTS
385 call tar with -p
386
387 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
388 AT: bootsplash is now gensplash
389 gliserv: add advanced_mode to shared_info
390 webgli: Added advanced mode. mostly just disables a few screens.
391
392 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
393 src/GLIPortage.py:
394 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
395 added emerge()
396 update sub-progress after each package is emerged
397 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
398 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
399 remove link if it exists before moving content into place
400 src/GLIArchitectureTemplate.py:
401 install_packages() now calls emerge() in GLIPortage
402 change all calls to self._emerge() to self._portage.emerge()
403 comment out all emerge status checking...using exceptions now
404 call copy_pkg_to_chroot() directly for livecd-kernel
405
406 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
407 src/GLIArchitectureTemplate.py:
408 remove add_pkg_to_world() and copy_pkg_to_chroot()
409 copy installer.log to installer.log.failed on install failure
410 src/GLIUtility.py:
411 added get_keymaps()
412 spawn() takes any False argument for chroot instead of just None
413 src/GLIPortage.py:
414 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
415 change copy_pkg_to_chroot() to work properly with use_root=False
416 figure PORTAGE_TMPDIR properly
417
418 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
419 src/net/server/html/*:
420 converted showclients, load/saveprofile
421
422 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
423 src/GLIPortage.py:
424 exclude packages already in chroot vdb from binary deplist
425 chroot to use best_version for chroot's vdb
426 src/runtimedeps.py:
427 accept ROOT via commandline instead of env
428
429 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
430 src/runtimedeps.py:
431 remove passing of ROOT
432 src/GLIPortage.py:
433 modify get_deps() to get deptree for each package and merge into final list
434 remove depgraph class
435 add debugging code to get_deps()
436 src/GLIArchitectureTemplate.py:
437 combine code for GRP/compile in install_packages() into one block
438 debugging code in install_packages()
439
440 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
441 src/runtimedeps.py:
442 initial commit
443 src/GLIPortage.py:
444 use separate script for GRP deps
445 remove calls to portage module
446
447 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
448 src/GLIPortage.py:
449 initial commit
450 move some of portage function from GLIAT
451 flipped around a few function args
452 src/GLIArchitectureTemplate.py:
453 revamp install_packages() for new GLIPortage
454
455 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
456 src/GLIArchitectureTemplate.py:
457 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
458
459 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
460 src/net/server/gliserv.py:
461 wrap generated code in a class to isolate it a bit better
462 302 redirects work
463 don't use cgi.escape() for <% %>
464 src/net/server/html/webgli/*:
465 load/save profile
466 src/GLIUtility.py:
467 change /sbin/lspci to just lspci
468
469 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
470 src/GLIClientController.py:
471 change ordering of statements in CC run() while loop to not go past the end
472 of the array
473 src/GLIArchitectureTemplate.py:
474 removed redundant bind mounts
475
476 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
477 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
478 added a diagram by blackace from last night.
479 added the glossary in RTF format.
480
481 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
482 x86AT: separated out emerge/configure from running of bootloader
483 added MBR drive support to lilo.
484 these changes will likely not work.
485 AT: added setup_and_run_bootloader step.
486
487 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
488 src/net/server/gliserv.py:
489 call generated code in a function
490 src/net/server/html/webgli/*:
491 include top/bottom
492 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
493 src/GLIClientCongifuration.py:
494 install mode magic
495
496 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
497 src/GLIClientController.py:
498 use GLIException when there's an import problem
499 added debug code to show install_steps
500 src/templates/amd64ArchitectureTemplate.py:
501 add . to import path
502 proper path this time: ../../templates
503 src/GLIArchitectureTemplate.py:
504 add _portage_best_version() function
505
506 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
507 added initial glossary and gimli diagram to the docs directory.
508 modify gli-dialog to allow editing of the install_profile after loading XML.
509
510 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
511 src/net/server/html/webgli/:
512 converted globaluse, localuse, networkmounts, portagetree, and stageselection
513 moved saveclientconfig stuff into clientconfig
514 moved saveconfigfiles into config files
515 converted etc_portage and makedotconf
516 converted bootloader and kernel
517 convert daemons, extrapackages, networking, review, services, timezone, users
518 src/net/server/gliserv.py:
519 proper 404 handling for .pyhtml extension
520 HTML escape <% %> stuff
521 work around python's sucky regexes
522 src/GLIInstallProfile.py:
523 allow set_{rsync,ftp,http}_proxy() to accept empty values
524
525 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
526 src/net/server/gliserv.py:
527 initial commit of Legolas templating engine
528 302 redirects
529 src/net/server/html/index.html, src/net/server/webgli_template.html:
530 minor changes for new code
531 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
532 initial commit of the conversion from the monolithic WebGLIHandler.py to the
533 one file per path Legolas goodness
534 partitioning[2-4] done
535
536 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
537 webgli: dhcp options in CC and post-install.
538 updated comparison chart.
539 webgli: etc/portage/* and distcc support added. not too-well tested.
540
541 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
542 webgli_template.html: valign=top on left side.
543 webgli: fix bootloader boot_device. now working.
544 webgli: CC proxy done. post-install proxy in progress.
545
546 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
547 src/net/server/webgli_template.html:
548 increase padding for content cell to 7px and add colspan=2
549
550 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
551 webgli: added graphic bar on top
552 webgli: added hover effects on the links on the left
553 webgli: re-rendered header_bg.png to stretch without artifacts
554
555 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
556 webgli: make.conf disabling fixes for dynamic_stage3
557 fixed portage snapshot browse popup
558 all changes tested.
559 webgli: add debug mode to CC screen. the screen still needs lots of work.
560
561 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
562 added debug mode question to gli-dialog
563 added CC proxies to CC networking for gli-dialog
564 webgli: fixed skip CC networking if connection active
565 webgli: portage snapshot defaults to CD
566 webgli: bootloader mbr drive selection
567 webgli: USE flags unselectable if dynamic_stage3
568 webgli: manual extra packages and save button.
569
570 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
571 src/GLIUtility.py:
572 change ping count to 2
573 docs/comparison.html
574 initial commit
575
576 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/templates/x86ArchitectureTemplate.py:
578 fix map() issue with grub code
579 replace kernel_names and initrd_names loops with one-liners
580
581 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
582 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
583 initial gli-dialog support for recommended partitioning layout and clear.
584 failure cleanup now an option for gli-dialog.
585 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
586 added comparison list and updated TODO!
587
588 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
589 src/GLIArchitectureTemplate.py:
590 fix to stage1() debug code
591 fix to stage2() debug code
592
593 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
594 some more bootloader code fixes. forgot boot_device != mbr_device.
595
596 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
597 src/GLIStorageDevice.py:
598 fix to unallocated space merging when last one is after part 4
599
600 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
601 src/GLIArchitectureTemplate.py:
602 small fix to debugging code in copy_pkg_to_chroot()
603
604 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
605 more bugfixes with bootloader code
606 gli-dialog side appears to work
607
608 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
609 initial adding of boot_device to backend.
610 initial boot_device support added to gli-dialog.
611 some fixes of my poor coding
612
613 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
614 converted gli-dialog to use the install_package_list.
615 gtkfe has already been converted by AllanonJL
616 new way working in gli-dialog now and added to webgli.
617 added set/get_boot_device() to IP
618
619 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
620 get_install_package_list added to InstallProfile. This can be used by the FEs
621
622 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
623 src/templates/x86ArchitectureTemplate.py:
624 call ls with '-1 --color=no'
625
626 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
627 added warning (#9) to GRP ppl about stage3 tarballs
628
629 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
630 src/GLIArchitectureTemplate.py:
631 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
632 confused
633
634 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
635 removed protocols from rc.conf screens
636 finished initial rc.conf and make.conf in webgli
637
638 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
639 src/net/server/gliserv.py:
640 add -h option to usage()
641 show time and request URI in debug mode
642 show client IP in debug mode
643 just use IP instead of trying to do a reverse lookup
644
645 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
646 src/net/server/gliserv.py:
647 'classier' 401 message
648 proper commandline parsing
649 help via -h
650 user/pass can be specificed via commandline option
651
652 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
653 src/net/server/gliserv.py:
654 basic HTTP auth
655
656 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
657 src/net/server/gliserv.py:
658 dynamic module reloading (yipee!)
659 send 'Last-Modified' header for real files
660 respond to HEAD with just headers
661 src/net/server/handlers/WebGLIHandler.py:
662 icons for drives
663
664 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
665 src/net/server/handlers/WebGLIHandler.py:
666 initial 'pretty' partition table display support
667 clicking partition in 'pretty' display works instead of radio buttons
668 radio buttons and pretty display work together
669 META redirect instead of javascript
670 pretty display stretches across entire screen
671 'Recommended layout' and 'Clear drive' functions
672 properly catch exceptions from do_recommended()
673 src/GLIArchitectureTemplate.py:
674 replace preinst, copy, postinst, rm steps with qmerge
675 whoops...that shouldn't have been commented out
676 create image_dir with -p in copy_pkg_to_chroot()
677 more generic of symlink crappiness
678 new copy_pkg_to_chroot() actually works now
679
680 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
681 src/GLIStorageDevice.py:
682 initial generic disk support
683 fixes for add_partition() code
684 src/net/server/handlers/WebGLIHandler.py:
685 added support for creating generic disks
686 add new partition working
687 save and delete partitions
688
689 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
690 webgli: Partitioning making progress.
691
692 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
693 src/GLIArchitectureTemplate.py:
694 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
695 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
696 dir) and works around /etc/gconf symlink problem
697
698 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
699 webgli: lots of updates. preliminary partitioning. extra packages works.
700
701 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 src/net/server/gliserv.py:
703 httpd now supports HTTPS and falls back to HTTP if not available
704 make fallback actually work
705 src/net/server/SecureXMLRPCServer.py:
706 SecureSocketServer is now threaded
707
708 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
709 src/net/client/gliclient.py:
710 try to use HTTPS for XMLRPC first and fallback to HTTP
711 pretend mode
712 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
713 HTTPS XMLRPC goodness from samyron
714 pass name of certificate
715
716 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
717 wegli: daemons and services screens done.
718
719 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
720 webgli: networking and users screens
721 added return_redirect to handler.py
722 loading and saving install/client profiles works for webgli now
723 Review also done
724
725 *GLI-0.2 (27 Oct 2005)
726
727 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
728 src/templates/x86ArchitectureTemplate.py:
729 properly check for bootloader emerge exist status with exitsuccess()
730 log output of grub install command
731 add --batch --no-floppy to grub command
732 grubinstallstring only gets logged if debug is on
733 src/GLIUtility.py:
734 update progress bar to 100% when process finishes
735
736 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
737 src/GLIClientController.py:
738 added debugging code for the interaction between the 2 threads via Event()
739 src/GLIUtility.py:
740 doubled the buffer size in spawn()
741 bump buffer size up to 16384
742 only report progress in 5% increments
743 src/GLIArchitectureTemplate.py:
744 kernelpkgs.txt support code
745 above disabled because it sucks
746 added add_pkg_to_world()
747
748 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
749 src/GLIArchitectureTemplate.py:
750 use tar | tar to copy files in copy_pkg_to_chroot()
751 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
752
753 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
754 DEBUGGING ADDED TO AT. verbose field added to CConfig.
755
756 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
757 src/net/server/gliserv.py:
758 / maps to index.html
759 look for actual files in html/
760 src/net/html:
761 new template
762 src/GLIUtility.py:
763 added parse_vdb_contents()
764 src/GLIArchitectureTemplate.py:
765 added copy_pkg_to_chroot()
766 added debug code to dynamic-stage3
767 switch dynamic-stage3 to new method
768 lots of bug fixes from adding debug code
769
770 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
771 webgli initial bootloader support + changed make.conf.
772 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
773
774 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
775 src/GLIUtility.py:
776 horrible tangled mess of code that is tarball unpacking subprogress display
777 add unpack progress to portage snapshot
778 use read() instead of readlines() in spawn()
779 only update progress bar for whole percents
780
781 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
782 src/templates/x86ArchitectureTemplate.py:
783 change call to 'grub' to use GLIUtility.exitsuccess()
784 add definition of 'build_mode' in _configure_lilo()
785 src/misc/updategtkfe, src/misc/updateglid:
786 fix so subshell is called in root shell
787
788 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 src/net/server/handlers/WebGLIHandler.py:
790 stage screen launches URI browser in sized window with various properties set
791
792 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
793 src/misc/updategtkfe:
794 updated to actually work
795 remove previous snapshot and extracted dir before downloading
796 src/misc/updateglid:
797 updated to actually work
798 src/templates/x86ArchitectureTemplate.py:
799 fixed bug where grub code was looking for 'root+root+file_name2'
800
801 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
802 src/net/server/handlers/WebGLIHandler.py:
803 URI browser
804 added mirror selection
805 src/GLIUtility.py:
806 ls via ssh strips off ending *
807
808 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
809 more updates to webgli. stage selection.
810
811 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
812 updated webgli with preliminary Network Mounts support.
813
814 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
815 GenDialog: string formatting and yes/no label fixes.
816 added WebGLI template for gliserv.py
817 added WebGLIHandler as well as a definition for it in gliserv.py
818 updates to the webgli files even though they won't be there for long.
819 Utility: remove exception for non-existant grppkgs.txt until the new livecd
820 goes public.
821
822 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
823 src/net/server/gliserv.py:
824 override dict to not be so anal
825 main server now loads separate module to handle requests
826 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
827 split out profile URLs into separate handler function
828 move handlers into subdirectory
829 add Welcome and Clients handlers
830
831 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
832 src/GLIUtility.py:
833 raise exception if password prompt received twice
834
835 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 src/GLIUtility.py:
837 removed rot13ify()
838
839 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
840 src/net/server/gliserv.py:
841 allow for param to be passed multiple times in GET
842 no XMLRPC functions return None
843 modify POST request parsing to only create a list if needed
844 fix GET request parsing so the list creation for multiple values works
845 src/net/client/gliclient.py:
846 various typo and type mismatch fixes
847 exit after exception
848
849 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
850 src/net/client/gliclient.py:
851 initial commit
852 pass MAC to XMLRPC functions
853 src/net/server/GLIServerProfile.py:
854 rename GLIClientsProfiles to GLIServerProfile
855
856 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
857 src/net/server/gliserv.py:
858 now handles POST requests
859 move majority of request handling code to common_handler() to reduce code
860 duplication
861 profile loading
862 client reg via XMLRPC goes into SharedInfo()
863 /showclients redesign
864 template fixes
865 allow handler functions to add/change headers
866 save profile
867
868 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
869 src/net/server/GLIClientsProfiles.py:
870 initial commit
871 src/net/server/template.html:
872 initial commit
873 src/net/server/gliserv.py:
874 add template mojo
875
876 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
877 src/net/server/gliserv.py:
878 XMLRPC mojo
879
880 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
881 src/GLIArchitectureTemplate.py:
882 add code in _edit_config() to comment line where variable is defined
883 previously
884 insert new line under previous definition of variable if it exists
885 small _edit_config() cleanup
886 src/GLIStorageDevice.py:
887 add clear_partitions() function
888 new sizes for recommended partition layout
889 automatically calculate swap size for recommended layout
890
891 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
892 src/templates/x86ArchitectureTemplate.py:
893 fat16 mojo
894
895 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
896 src/GLIStorageDevice.py:
897 prevent do_recommended() from being run twice
898 rewrite do_recommended() to be more robust
899 src/GLIArchitectureTemplate.py:
900 rework _edit_config() to not write duplicate entries
901
902 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
903 src/GLIStorageDevice.py:
904 added do_recommended() function to automatically created 256M/1G/* layout
905
906 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
907 src/gli-dialog.py: added set_distcc to the list
908 GenDialog: added set_distcc. untested.
909 IP: added install_distcc flag.
910 AT: added install_distcc function based on the flag. runs after build_kernel
911 changed AT spawn command for distcc for nodeps.
912
913 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
914 src/GLIUtility.py:
915 add rot13ify() function
916
917 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
918 src/GenDialog.py:
919 added a sentence of text. unchecking support added.
920
921 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
922 src/GLIUtility.py:
923 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
924 src/GenDialog.py:
925 still working on extra_packages. transformed the list to new format.
926 added GRP indication to list. untested.
927 TODO lists updated.
928 src/fe/dialog/gli-dialog.py:
929 spelling mistook.
930
931 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
932 src/GLIUtility.py:
933 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
934
935 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
936 src/GLIUtility.py:
937 add get_directory_listing_from_uri()
938 add http support to above
939 add ftp support to above
940 add scp support to above
941 src/GLIArchitectureTemplate.py:
942 "0" instead of 0 for key of single-element dict passed to _edit_config()
943
944 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
945 value_only -> only_value
946
947 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
948 gutted out all of etc_portage structure since it is now all handled by
949 etc_files
950
951 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
952 src/GLIArchitectureTemplate.py:
953 install_packages() sends progress update notifications
954 src/templates/x86ArchitectureTemplate.py:
955 increase sleep to 5s between format tries
956 src/GLIClientController.py:
957 pass 'self' to AT instead of 'self._pretend'
958
959 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
960 logger -> logger.log in x86AT
961
962 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
963 added set_etc_portage to IP. debugging gli-d's support for it.
964
965 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
966 src/templates/x86ArchitectureTemplate.py:
967 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
968
969 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
970 src/GLIArchitectureTemplate.py:
971 add _portage_best_version() function and rework install_packages() to allow
972 for future X of Y tracking
973 Use best_visible instead of best_version
974 tracked down and fixed missing = causing empty install extra packages
975 use = when emerging also
976 quickpkg hokey pokey
977 run _get_packages_to_emerge() again with -pk
978
979 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
980 src/ArchTemplate:
981 removed install_xorg_x11, and put the xorg.conf copying at
982 the end of install_packages.
983 added updateglid to /src/misc
984 updated all core files with new GPL notice and copyright statement.
985
986 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
987 src/GLIUtility.py:
988 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
989 a snapshot in /mnt/cdrom/snapshots/
990 get_snapshot_from_cd() adds file:// at the beginning
991 change calls to extra package special case functions to 'self.blah'
992
993 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
994 src/ArchTemplate: changed "voodoo".
995 changed order of portage sync methods. made a fallback to webrsync if
996 normal emerge sync fails.
997 removed get_sources_from_cd because it is obsolete.
998 add special cases to install_packages. remove fatal exception on package
999 install failure b/c the box will still be bootable.
1000 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1001 handled in the FEs.
1002 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1003 awaiting testing.
1004
1005 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1006 src/GLIStorageDevice.py:
1007 global try/except block around fs resizable detection code
1008 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1009 install-failed cleanup function
1010
1011 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1012 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1013
1014 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1015 GLIGenDialog:
1016 add drive choices for loaded configs.
1017 force snapshot for dynamic_stage3
1018 init the snapshoturi input to the cd snapshot if not already selected.
1019 if dynamic_stage3, skip the make.conf step.
1020 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1021 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1022
1023 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1024 src/GLIArchitectureTemplate.py:
1025 manually call MAKEDEV in stage3-dynamic code
1026 copy /etc/inittab.old to /etc/inittab in chroot
1027 src/GLIUtility.py:
1028 add beginning of validate_uri() function
1029 add file:/// support to validate_uri()
1030 single quotes when setting livecd password
1031
1032 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1033 src/GLIGenDialog.py:
1034 change getmountpoint() to get_mountpoint()
1035 src/misc/updategtkfe:
1036 committed script to automatically download latest snapshot and run gtkfe
1037 src/templates/x86ArchitectureTemplate.py:
1038 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1039 src/GLIArchitectureTemplate.py:
1040 give tmp_minor an initial value in mount_local_partitions so that the value
1041 remain from the previous drive
1042
1043 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1044 src/templates/x86ArchitectureTemplate.py:
1045 Fix _configure_lilo() for IP using GLISD stuff
1046 src/GLIArchitectureTemplate.py:
1047 install_cron_daemon() treats "none" specially
1048
1049 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1050 old patch from Steven Mertens to resolve bug #96642
1051 numerous asthetic changes to GenDialog, no real functionality changes though.
1052 strings renamed for global use if necessary.
1053 fix all three parts of bug 102291
1054 disable set_etc_portage until fully-written.
1055
1056 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1057 src/GLIClientController.py:
1058 lower-case http/ftp proxy envvars
1059
1060 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1061 src/GLIClientController.py:
1062 log end of pre_install steps to aid in debugging
1063 src/templates/x86ArchitectureTemplate.py:
1064 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1065
1066 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1067 src/GLIArchitectureTemplate.py:
1068 check to make sure that the device node we're wait for to exist isn't of
1069 type 'free'
1070
1071 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1072 src/GLIGenDialog.py:
1073 convert install_packages to list in set_extra_packages()
1074 check return code of checklist() call in "Manual" section
1075 *actually* fix the first problem
1076
1077 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1078 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1079 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1080
1081 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 src/GLIArchitectureTemplate.py:
1083 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1084
1085 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1086 Add CDATA support to SimpleXMLParser and add utility functions for it.
1087
1088 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1089 src/GLIArchitectureTemplate.py:
1090 Fix case where vixie-cron is specified as a full package atom, as we still
1091 don't want to run 'crontab /etc/crontab' for it.
1092
1093 *GLI-0.1 (3 Aug 2005)
1094
1095 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1096 add scp to list of is_uri() so GenDialog doesn't complain.
1097 fixed livecd-kernel bug in bootloader code.
1098 fixed gendialog for dynamic_stage3 instead of "networkless"
1099 change bootloader to allow for both initrd and initramfs.
1100 fix IP for dynamic_stage3.
1101 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1102
1103 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1104 Added full scp:// URI support to get_uri() in GLIUtility
1105 Remove "networkless" from dynamic stage3 if locic.
1106 Remove print statement from scp:// code.
1107 Change scp code to check for "assword: " instead of "Password:"
1108 Fix post-install network code to create net.eth1+ symlink correctly
1109 Check to make sure pkg can be split on / and some debugging code
1110 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1111 SimpleXMLParser handles True/False/None correctly now
1112 Comment out above fix
1113 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1114
1115 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1116 Removed a FIXME in the GLIClientConfiguration that is no
1117 longer needed.
1118
1119 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1120 Default to x86 in ClientConfig
1121 Typo in build-a-stage3 code.
1122 Remove MAKEDEV call in build-a-stage3 postscript.
1123
1124 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1125 Rewrote init of IP for gli-d. Other GenDialog updates.
1126 allow network_type to be None in CConfig.
1127
1128 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1129 Add _dynamic_stage3 option to IP.
1130 Add check for that option to dynamic stage3 code in ArchTemplate.
1131 Fix code to determine default route in get_eth_info() in GLIUtility.
1132 Fix serialization of dns-servers in ClientConfig.
1133
1134 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1135 changed default values of cron/logger in IP.
1136 moved GenDialog IP init out to the individual files. gli-dialog's version
1137 will change quite a bit.
1138
1139 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1140 added ppcArchTemplate. blank now. working on yaboot.
1141 modified ArchTemplate for amd64 and ppc custom kernels.
1142 skeleton implementation of _configure_yaboot.
1143 small fixes to other templates.
1144
1145 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1146 GenDialog updates. changed comment in IP.
1147
1148 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1149 src/GLIInstallProfile.py:
1150 Fix codeman's screwup of changing the service seperator to ',' in the parser
1151 without changing it in the serialization code! Also document this in a
1152 comment so you find it easier. Everybody needs to make sure they update
1153 their install profiles!
1154
1155 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1156 src/GLIArchitectureTemplate.py:
1157 Fix casting of list to string and concat of None with string, as well as
1158 commented prototype of checking that mounting actually worked (found a case
1159 where mount can return success, but the mount won't be done).
1160
1161 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1162 src/templates/x86ArchitectureTemplate.py:
1163 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1164 checking for the device, and sleeping 1 second each time.
1165
1166 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1167 src/templates/x86ArchitectureTemplate.py:
1168 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1169 bootloader works again. Also rename _install_{grub,lilo} to
1170 _configure_{grub,lilo} since they don't install the loaders anymore
1171 themselves.
1172
1173 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1174 fix global USE flags to not include the arch types at the end.
1175 updates to GenDialog and gli-d.
1176
1177 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1178 fixing bootloader code for no initrd and initrd->initramfs naming change.
1179
1180 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1181 Proper comments and parameters to GLIException in install_mta()
1182 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1183 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1184 list_tarball_from_mirror() to eliminate blank last item.
1185
1186 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1187 Added stage3 generation code.
1188
1189 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1190 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1191 Mild changes to GenDialog.
1192
1193 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1194 Remove separate install step configure_rc_conf() since it's handled by
1195 update_config_files()
1196 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1197 function is called twice on the same file.
1198
1199 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1200 Missing \ in sed in _get_packages_to_emerge()
1201 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1202 Check in _quickpkg_deps() to ignore blank package names returned from
1203 _get_packages_to_emerge()
1204
1205 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1206 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1207 in the dialog.py gauge code.
1208
1209 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1210 Add code to update_config_files() to go through etc_files and update stuff.
1211 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1212 Only use float() in partition xml parsing code if type == "free"
1213
1214 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1215 finished almost all internationalization of GenDialog.
1216 attempt at fixing rc.conf function. moved 3 generate functions out of
1217 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1218 added dialog.py to the fe/dialog directory so it actually gets used.
1219
1220 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1221 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1222
1223 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1224 fix extra entry in list_mirrors()
1225 beginning internationalization runthrough.
1226
1227 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1228 added dialog.py to /src temporarily until it gets accepted upstream.
1229 fix for unused value in form in dialog.py and changed heights.
1230 fix GenDialog forms.
1231
1232 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1233 Changed hostname/domainname for new baselayout.
1234 Changed _add_to_runlevel errors to logs.
1235 Updated TODO list to show status of GenDialog
1236 More updates to GenDialog including two checklists that probably won't work.
1237 update IP to use comma-separated list instead of space separated for services.
1238
1239 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1240 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1241 GenDialog as it gets closer to completion.
1242
1243 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1244 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1245 instead of int() in add_partition_device_partition() for minor (closes 96804)
1246
1247 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1248 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1249 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1250 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1251
1252 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1253 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1254 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1255 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1256 Fix undefined variable 'output' issue in spawn().
1257
1258 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1259 More updates to GenDialog and gli-d.
1260
1261 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1262 Modify list_mirrors() to return a list of mirror URL/name pairs.
1263
1264 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1265 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1266 get subarch.
1267
1268 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1269 Backend partitioning will create disklabel is none exists. Installprofile
1270 defaults to "" now instead of "msdos" for disklabel type. Fix for
1271 mount_local_partitions() to remember device along with minor in the
1272 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1273 add else block to log unsupported netmount types to mount_network_shares()
1274
1275 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1276 src/GLIArchitectureTemplate.py:
1277 Refactor kernel_compile common stuff, fix 2.4 build process.
1278 src/fe/cli/clife.py:
1279 Logging system.
1280 src/GLIUtility.py, src/GLIStorageDevice.py:
1281 Add comments about re-writes needed for boxes without sysfs.
1282
1283 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1284 src/GLIArchitectureTemplate.py:
1285 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1286 'make dep' call for custom compile. build_mode support for prepare-only and
1287 none types completed. custom compile function chains shell functions in
1288 spawned script, to allow for catching all errors.
1289
1290 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1291 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1292 and GenDialog. other gendialog updates as well. kernel updates untested.
1293
1294 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1295 src/GLIInstallProfile.py:
1296 Change structure of etc-portage stuff. The serialization was broken before my
1297 last commit, and I am the only person that's ever used it. The new schema is
1298 as follows:
1299 <etc-portage>
1300 <file name="package.mask"/>
1301 <file name="package.unmask">
1302 <entry atom="sys-kernel/openmosix-sources"/>
1303 </file>
1304 <file name="package.use">
1305 <entry atom="sys-libs/db">
1306 -java
1307 </entry>
1308 <entry atom="dev-libs/cyrus-sasl">
1309 -ldap
1310 </entry>
1311 </file>
1312 </etc-portage>
1313
1314
1315 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1316 src/GLIInstallProfile.py:
1317 Add new entry for gli-profile/kernel-build-method item. Add missing
1318 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1319 keys in the same order.
1320
1321 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1322 src/GLIArchitectureTemplate.py:
1323 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1324 was repeatedly appended to make.conf.
1325
1326 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1327 src/GLIArchitectureTemplate.py:
1328 Put some Linux-2.6 specific code under a if statement. Store list of
1329 successfully mounted swap device for using swapoff. Add proper error checking
1330 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1331 'file'. Clean up some redundant code (thanks to pychecker).'
1332
1333 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1334 Fix typos: get_extended() instead of get_extended_partition(). Added
1335 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1336 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1337
1338 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1339 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1340 in add_network_interface.
1341
1342 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1343 src/GLIArchitectureTemplate.py:
1344 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1345 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1346 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1347 prepare_chroot.
1348
1349 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1350 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1351 +src/fe/installer-gtk:
1352 Add new automated CLI frontend. Add scripts that are the intended means to
1353 use each frontend.
1354
1355 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1356 src/GLIClientController.py:
1357 Add null type to network config, for cases where the interface is already up
1358 and should not be touched (netboot for example).
1359
1360 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1361 src/GLIArchitectureTemplate.py:
1362 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1363 string!. Try to use binary packages if available by default.
1364
1365 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1366 src/GLIArchitectureTemplate.py:
1367 More error checking for _add_to_runlevel, to ensure that the init script
1368 actually exists before we try to add it. set_services phase must take place
1369 after the package installation, otherwise the init scripts might not exist.
1370 Find the correct init script for the cron and logging daemons, and add that
1371 instead of the package atom.
1372
1373 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1374 src/GLIArchitectureTemplate.py:
1375 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1376 usage of 'file' to 'contents' for the variable name, as it shadows
1377 __builtin__.file.
1378
1379 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1380 src/GLIArchitectureTemplate.py:
1381 Add MTA install code, and include MTA install phase. Ensure
1382 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1383 for 'none' kernel config for build_kernel phase. Put kernel_script in
1384 /var/tmp instead of /root for build_kernel phase.
1385
1386 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1387 Rename mta variables to match syslog/cron variables.
1388
1389 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1390 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1391 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1392 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1393 src/templates/.cvsignore, src/tests/.cvsignore:
1394 Refactor partition formatting again to include error checking. Allow 'none'
1395 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1396
1397 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1398 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1399 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1400 only have a single spawn call.
1401
1402 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1403 refixed samyron's fix of set_architecture_template.
1404
1405 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1406 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1407 be executable.
1408
1409 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1410 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1411 error checking when you call set_architecture_template.
1412
1413 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1414 moved the mkfsopts input to the partition options menu instead of the during
1415 the creation process. updated GenDialog to say it supports reiserfs v3.
1416
1417 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1418 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1419 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1420 Add support for other partition types to dialogfe.
1421 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1422 avoid integer overflows and wraparounds.
1423
1424 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1425 Removed start/end from XML output and added mkfsopts to partitioning info.
1426 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1427 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1428 in GLIClientConfiguration. Change from .1 and .9 to constants for
1429 partitioning. Fix free space overwriting bug. Remove a few unused functions
1430 from rewrite. Fix call to get_partition_at()
1431
1432 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1433 Updates to GenDialog and dialogfe.
1434
1435 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1436 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1437
1438 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1439 more GenDialog updates to partitioning.
1440
1441 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1442 Indenting issue in GLISD/get_ordered_partition_list.
1443 updates to GenDialog partitioning and added default UTC for timezone in IP.
1444
1445 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1446 Added GLISD.get_model()
1447
1448 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1449 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1450 More updates to GenDialog :)
1451
1452 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1453 Added get_interface_realname() function.
1454
1455 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1456 Added auto-save of CConfig and copying to new /root after install.
1457 yet even more GenDialog updates.
1458
1459 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1460 removed print statement from GLISD. more updates to GenDialog.
1461
1462 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1463 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1464 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1465 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1466 places in GLIClientConfiguration.
1467
1468 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1469 Fix mount_local_partitions(), configure_fstab(), and
1470 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1471 A few more fixes for templates/x86Archtemplate
1472
1473 27 May 2005; Preston Cody <codeman@gentoo.org> :
1474 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1475 a work in progress.
1476
1477 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1478 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1479 directly. GLISD can now handle data imported from XML.
1480
1481 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1482 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1483 handle blank (no disklabel) disks.
1484
1485 20 May 2005; Preston Cody <codeman@gentoo.org> :
1486 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1487 up, documented, and separated out serialization and grouped all sections.
1488
1489 19 May 2005; Preston Cody <codeman@gentoo.org> :
1490 Reorganization of ClientConfiguration and gutting of unused functions.
1491 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1492
1493 18 May 2005; Preston Cody <codeman@gentoo.org> :
1494 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1495
1496 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1497 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1498 partitioning. CC serializes install profile to disk and prepare_chroot()
1499 copies it into /mnt/gentoo/root
1500
1501 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1502 Moved URI parsing into new function parse_uri()
1503
1504 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1505 Added XMLParser module.
1506
1507 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1508 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1509 Minor fix to is_uri() regex to allow hyphens in hostname.
1510
1511 12 May 2005; Preston Cody <codeman@gentoo.org> :
1512 Updated finishing_cleanup for new unmounting method from agaffney.
1513
1514 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1515 Fix GLILogger to use correct time format string. Fix _edit_config() to
1516 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1517 unicode support to is_realstring().
1518
1519 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1520 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1521 return value instead of non-zero. Add code to output a traceback to the
1522 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1523 instead of --nocolor.
1524
1525 10 May 2005; Preston Cody <codeman@gentoo.org> :
1526 Added GLIGenDialog.py to make a generic class for the dialog functions that
1527 can be used by both dialogfe and the netfe/be. updated both for new filename.
1528 date changes. 2004->2005.
1529
1530 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1531 Removed 'quiet=True' from spawn() calls
1532
1533 10 May 2005; Preston Cody <codeman@gentoo.org> :
1534 Updated GLIUtility with patches from chotchki. Also added documentation
1535
1536 9 May 2005; Preston Cody <codeman@gentoo.org> :
1537 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1538 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1539 from bug #89683, mostly touchups.
1540
1541 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1542 GLIStorageDevice cleanup patch from bug #91761
1543
1544 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1545 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1546 _edit_config(). Error logging casts 'error' to str
1547
1548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1549 Exceptions received in CC are logged before being passed to the FE. Added
1550 code to CC to handle exceptions *not* thrown by the installer itself.
1551
1552 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 get_max_mb_for_resize() returns -1 if not self.resizeable
1554
1555 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1556 More dirty rsync hacks :-/
1557
1558 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1559 Patches from chotchki (bug #90325) to improve CC networking. untested.
1560
1561 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1562 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1563 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1564 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1565 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1566 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1567 _get_packages_to_emerge()
1568
1569 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1570 Added group-adding code to set_users in ArchTemplate
1571
1572 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1573 Added post-install script code
1574
1575 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1576 Fixed encapsulation issues in GLIClientController (bug #90141)
1577
1578 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1579 Update resizing code in GLIStorageDevice
1580
1581 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1582 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1583
1584 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1585 Reverted change to ArchTemplate and added support for commented line in old
1586 code.
1587
1588 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Changed _edit_config() to modify value in-place instead of commenting out and
1590 adding the new value to the end of the file.
1591
1592 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1593 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1594 Also updated TODO list.
1595
1596 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1597 Use blackace's one-liner to add comments for all function for use with
1598 pythondoc.
1599
1600 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1601 Moved 'end >= device_sectors' check out of loop to check for next partition's
1602 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1603 Partitioning code now tracks start/end of extended for placing logicals. End
1604 point of logical is now adjusted along with start.
1605
1606 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1607 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1608 the way of partitioning from a blank disk. Add int() around access to minor
1609 key in partition information due to new partition code leaving them as float.
1610
1611 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1612 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1613
1614 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1615 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1616
1617 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1618 Added support for DHCP options and MAC addresses in the InstallProfile.
1619
1620 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1621 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1622 sed to properly strip out junk.
1623
1624 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1625 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1626 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1627
1628 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1629 Fixed indent problem in GLICController
1630
1631 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1632 Check for disklabel type "loop" and use the device name without a minor.
1633
1634 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1635 Remove /tmp/compile_output.log and /var/log/install.log when install is
1636 complete. Added code to (hopefully) keep 2nd thread running after install.
1637 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1638 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1639 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1640
1641 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1642 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1643 when unpacking tarball.
1644
1645 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1646 rewrote filesystem_tools. looks like it works so ripping out all the old
1647 filesystem_tools code.
1648
1649 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1650 Changed the print statements to logging in the partitioning BE code.
1651 the logger may need to be imported to the x86archtemplate. unknown yet.
1652 Added the finishing_cleanup function.
1653 added a fix to the logger from BenUrban
1654
1655 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1656 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1657 URIs. The blank uri check has been commented out.
1658 ripped out error checking of set_services. this is done by _add_to_runlevel.
1659
1660 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1661 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1662
1663 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1664 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1665 the install profile if available. Commented out spawn() debugging prints
1666
1667 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1668 small changes to setup_network_post. moved adding to runlevel of net.x to
1669 after the device gets symlinked. added domainname runlevel command.
1670
1671 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1672 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1673 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1674 spawn() call in livecd-kernel code to pass environment variables.
1675 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1676 the install profile if available.
1677
1678 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1679 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1680 to handle installing the livecd kernel into the new system.
1681
1682 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1683 should emerge hotplug and coldplug before adding them to runlevel.
1684
1685 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1686 took chroot out of grub_install command.
1687
1688 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1689 Changed chroot wrapper code in spawn() to write the wrapper the python way
1690 instead of the bash way to avoid quote conflicts. Added
1691 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1692 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1693 as it breaks the piping.
1694
1695 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1696 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1697
1698 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1699 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1700 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1701 GLIInstallProfile.
1702
1703 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1704 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1705 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1706 into /mnt/gentoo in prepare_chroot()
1707
1708 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1709 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1710 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1711 to start/end sectors
1712
1713 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1714 Add 2>&1 to cmd in spawn()
1715
1716 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1717 Modified GLIUtility.exitsuccess() to work with return value from
1718 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1719 creates wrapper script for commands run inside chroot so multiple commands
1720 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1721 for the generated script from spawn()
1722
1723 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1724 Removed default values for stage tarball URI and portage tree URI from
1725 InstallProfile. These should be set by the FEs. also added services step to
1726 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1727 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1728
1729 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1730 Small fix for setting the default gateway. Also added feature to dialogfe.
1731
1732 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1733 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1734
1735 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1736 Fixed a bunch of true -> True typos. lots of em
1737 only write new resolv.conf if there are dns servers listed.
1738
1739 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1740 Commented out 'display_on_tty8=True' in start_portmap()
1741
1742 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1743 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1744
1745 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1746 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1747 lang parameter to __init__()
1748
1749 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1750 updates to TODO list.
1751
1752 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1753 Initial code for quickpkg GRP support. Fix loop to grab packages from
1754 'emerge -p blah'
1755
1756 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1757 check for dhcp in the network stuff and emerge it if it is.
1758 added quickpkg to TODO list
1759
1760 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1761 Changed the raising of 'warning' exceptions to a simple log of the error
1762 so that the installer can continue.
1763
1764 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1765 Some big changes. First, changed most output to display_on_tty8.
1766 Second, added log lines to all templates. Some smaller fixes such as typos.
1767 Also did some cleanups of old commented lines.
1768
1769 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1770 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1771 Undo change with fix. Escaping fix in GLIStorageDevice.py
1772
1773 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1774 more updates to TODO list. hopefully we'll soon start removing items instead
1775 of adding them.
1776
1777 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1778 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1779
1780 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1781 updated TODO list. (again)
1782
1783 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1784 changed output of portmap start to display_on_tty8.
1785 fixed bootloader for udev and multiple kernels
1786 fixed custom kernel config (again)
1787
1788 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1789 changed default value of CC._enable_ssh to True because this is smart.
1790 added code to allow custom kernel .config. may be unstable and break. sorry.
1791
1792 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1793 partition() now waits until after it checks for partition flags before delete
1794 the partitions :P
1795
1796 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1797 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1798 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1799 blank.
1800
1801 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1802 Various fixes related to the add_users function. Still not yet finished.
1803 Added things to the TODO list. Lets start using that!
1804
1805 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1806 Added code to x86Template to format newly created partitions. Also added
1807 some error checking code. GLIStorageDevice passes 'minor' with data to
1808 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1809 mounting code.
1810
1811 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1812 Took out unnecessary setting of random livecd root password. the cd already
1813 sets it randomly.
1814
1815 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1816 Took out an unneeded step from CC's run()
1817
1818 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1819 Attempt at detecting and adding windows partitions to lilo.
1820
1821 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1822 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1823 partition. fixed misc exit_status => exitstatus typo.
1824
1825 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1826 Added basic code for resizing filesystems with pyparted. Fixed code for
1827 resizing ntfs and ext2/3.
1828
1829 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1830 Fixed partition() in x86Template so that it scans through logicals and deletes
1831 before deleting containing extended partition. Also clears partition table to
1832 be safe before third pass.
1833
1834 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1835 Added mount_network_shares. not able to test it from this computer.
1836 will test when i get back to school.
1837 also added start_portmap to the client_controller as an always-do.
1838 agaffney says this is needed for NFS mounts to work.
1839
1840 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1841 Partial rewrite of partitioning code in x86Template. No longer shells out to
1842 parted to perform actions, now uses all pyparted calls. Code "works" in a
1843 test, but still needs lots of TLC. Also modified tests/install.py to work
1844 with x86Template and GLIClientConfiguration.
1845
1846 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1847 Initial move of partitioning code from ArchTemplate to x86Template.
1848
1849 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1850 Added grp_install and services to InstallProfile. forgot about the set_root_password
1851
1852 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1853 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1854 agaffney. Test Install ran very well (skipping partitioning).
1855
1856 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1857 My mid-day update. rewrote mount_local_partitions for order of mounting.
1858 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1859 partition format. fixed a few _edit_configs. some may still have eluded me.
1860
1861 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1862 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1863 to test it.
1864 Just finished mount_local_partitions in GLIArchitectureTemplate
1865
1866 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1867 Added get_num_sectors() to GLIStorageDevice.
1868
1869 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1870 GLIStorageDevice now tracks partition boundaries in sectors instead of
1871 cylinders.
1872 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1873 from GLIInstallProfile.
1874
1875 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1876 GLIStorageDevice returns "unknown" instead of "" for get_type()
1877
1878 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1879 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1880 actually work. Commented out resizability checking code for speed.
1881
1882 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1883 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1884 in GLIStorageDevice at the suggestion of plors
1885
1886 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1887 Added a function to GLIUtility to pull a value from a make.conf-style config
1888 file. Minor type fix to GLIInstallProfile.py
1889
1890 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1891 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1892 Separated network mounts from partition data structure in GLIInstallProfile
1893
1894 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1895 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1896 can be resized.
1897
1898 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1899 Added some of the final functions to GLIInstallTemplate.
1900 Yes this project is still active despite rare use of the Changelog!
1901
1902 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1903 Added the GLIPartitionTools.py file. This is a temporary insertion of
1904 partitioning tools that will eventually go into their own package.
1905
1906 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1907 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1908 run-time for the program). Added __init__(install_profile,
1909 client_configuration) to GLI.InstallProfile. This sets install_profile and
1910 client_configuration once so as to avoid constantly passing stuff every time
1911 we call a method.
1912
1913 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1914
1915 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1916 config files without messing up all the other stuff in them. This will be
1917 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1918
1919 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1920
1921 Added GLI.InstallTemplate framework. This is not yet functional. However,
1922 it does have a few basic things. I added two private methods. One is
1923 _depends(). This will be used for dependency checking (ie. unpacking a
1924 tarball requires that partitioning has been done). The other is
1925 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1926 instead of being run in the liveCD environment, it runs in the chroot. This
1927 requires a bit of fork() magic, so I isolated the code. Hope to work more
1928 this week to get this class formed...
1929
1930 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1931 Added SAX parsing. Made GLI.InstallProfile a subclass of
1932 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1933 to be lists instead of tuples to allow for easier modification (mutable,
1934 rather than immutable objects). Updated existing pydoc and added more.
1935 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1936 GLI.py a bit. Fixed all accessors to use self references.
1937 Added initial unit test code.
1938
1939 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1940 Added initial changelog. Setting up the basic structure of the CVS repository
1941 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1942 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20