/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1485 - (show annotations) (download)
Mon Jul 31 17:01:53 2006 UTC (8 years, 3 months ago) by wolf31o2
File size: 80438 byte(s)
Finally properly fixing the installer script.  Thanks to Andrew Gaffney for doing the testing and coming up with the patch.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.669 2006/07/31 17:01:53 wolf31o2 Exp $
4
5 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
6 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
7 doing the testing and coming up with the patch.
8
9 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
10 src/GLIArchitectureTemplate.py:
11 skip blank entries/files in update_config_files()
12
13 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
14 src/templates/x86ArchitectureTemplate.py:
15 move logical clipping logic a bit
16
17 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
18 I've commented out most of the code that used launch. It wasn't working and
19 we don't have the time to fix it before the release. I'll look into it after
20 the release and make it more robust and flexible.
21
22 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
23 src/templates/x86ArchitectureTemplate.py:
24 clip logical partition at end of extended
25
26 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
27 src/GLIInstallProfile.py:
28 Added a few more applications to the list of extra packages to be merged,
29 all from various GRP sets.
30
31 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
32 Added launch variable to the end of each try-run with auth, which should
33 cause this to function properly. Of course, more testing is needed.
34
35 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
36 Fix a missed space in the installer script.
37
38 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
39 src/GLIClientConfiguration.py:
40 adding 'None' with capital N so that the frontends can parse the network type
41
42 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
43 src/GLIClientController.py:
44 log version-stamp
45
46 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
47 Updated the installer script to allow specifying the front-end to run from
48 the command line. Currently, it only supports dialog and gtk. It still needs
49 some testing, however.
50
51 9 July 2006; Preston Cody <codeman@gentoo.org>
52 src/GLIGenDialog.py:
53 make lilo only show up for x86 if non-networkless
54
55 25 Jun 2006; Preston Cody <codeman@gentoo.org>
56 src/GLIGenDialog.py:
57 adding code to auto-add doscsi if a scsi drive detected.
58 this code is also in the gtkfe already
59
60 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
61 src/GLIPortage.py:
62 pass proper PORTAGE_TMPDIR
63
64 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIUtility.py:
66 fix list_mirrors() to ignore <uri> lines that don't end on the same line
67
68 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
69 Added code to the mta step in AT to parse the install packages list and
70 look for mtas and if it finds it emerge it.
71 Initial attempt at moving extra_packages early in the setup to only show
72 local USE flags relating to those packages.
73 .. abandoned local USE project. no right way to do it.
74
75 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/GLIUtility.py:
77 minor tweak to regex for parsing mirrors.xml
78
79 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
80 src/templates/x86ArchitectureTemplate.py:
81 make use of strict_start and strict_end in partition recreation
82
83 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
84 src/templates/x86ArchitectureTemplate.py:
85 add strict_start and strict_end parameters to _add_partition()
86 add _find_current_minor_for_part() function to help with resizing
87 fix logical/extended logic in _partition_delete_step()
88 in _partition_resize_step(), delete, recreate at new size, resize, delete
89 call resize2fs with no size argument so it fills entire partition
90 more logging
91 only delete, recreate, resize, delete if growing
92 pass new size to resize2fs in K
93
94 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIStorageDevice.py:
96 call reorder_minors() from tidy_partitions() instead of
97 set_partitions_from_disk()
98 add code to reorder_minors() to take extended/logical into consideration with
99 non-free partitions
100
101 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
102 added a check of the length of the directory in /usr/src if under 6 characters
103 should fix bug 131809
104
105 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
106 src/GLIArchitectureTemplate.py:
107 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
108 and livecd-kernel
109
110 16 Apr 2006; Preston Cody <codeman@gentoo.org>
111 src/GLIGenDialog.py:
112 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
113
114 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIInstallProfile.py:
116 change kernel-modules to not be so stupid
117
118 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
119 GLIMD: fix display problem with execute.pyhtml.
120 make tables better.
121
122 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
123 src/GLIInstallProfile.py:
124 fix handling of int/float for minor
125 src/templates/x86ArchitectureTemplate.py:
126 save/restore partition name
127 src/GLIStorageDevice.py:
128 support for partition name
129
130 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
131 touchups to add_profile in GLIMD to link to webgli
132 add a save to GLIMD profile button in webgli's saveprofile
133 gliserv.py:
134 initial attempt at custom networking info per client. hostname support only.
135
136 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
137 src/net/server/html/webgli/partitioning[234].pyhtml:
138 small fixes for new partioning code
139
140 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
141 src/GLIClientController.py:
142 record PID of secondary thread
143
144 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
145 src/GLIGenDialog.py:
146 small fix for new partitioning code
147
148 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
149 src/GLIStorageDevice.py:
150 add get_devnode()
151 fix up detect_devices() to detect cciss/ida arrays
152 src/templates/x86ArchitectureTemplate.py:
153 use get_devnode() instead of figuring out the devnode
154 skip first 3 steps if partition layout hasn't changed
155 wipe disk and create new disklabel before recreating partitions
156 src/GLIArchitectureTemplate.py:
157 use get_devnode() in local mount and fstab stuff
158
159 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
160 src/GLIStorageDevice.py:
161 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
162
163 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
164 src/templates/x86ArchitectureTemplate.py:
165 continue breakup/cleanup of partitioning code
166
167 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
168 src/GLIStorageDevice.py:
169 set disklabel to default for arch when clearing the partition table
170 src/templates/x86ArchitectureTemplate.py:
171 complete rewrite of first and second passes
172
173 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
175 allow iterating over Device object to get partitions
176
177 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIStorageDevice.py:
179 allow access to Device object like a dict
180
181 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/GLIStorageDevice.py:
183 allow access to Partition object like a dict
184
185 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
186 src/templates/x86ArchitectureTemplate.py:
187 fail if any filesystems are mounted on the device being partitioned
188
189 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
190 src/GLIStorageDevice.py:
191 reorder minor numbers when loading partitions from disk to match the physical
192 partition order
193
194 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
195 src/GLIStorageDevice.py:
196 overhaul for supporting mac disklabels and partitions out of disk order
197 remove free space from inside extended partition when extended is removed
198
199 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
200 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
201 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
202 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
203 Added bash scripts, icons, and desktop entries from the ebuild to make my
204 life easier.
205
206 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
207 src/GLIStorageDevice.py:
208 raise an exception if the existing partitions are out of disk order
209 look for minors out of order instead of disk position
210
211 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
212 src/fe/dialog/gli-dialog and src/GLIGenDialog:
213 added networkless mode to gli-dialog.
214
215 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
216 src/templates/x86AT:
217 add windows detection code for grub. untested.
218
219 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
220 src/templates/x86ArchitectureTemplate.py:
221 bootloader and partitioning external commands log to compile_output.log
222 wait for device node to exist before resizing
223 add -v to ntfsresize command
224 src/GLIStorageDevice.py:
225 return start/end with ip structure
226 pad min ntfs size by 50 MB just to be safe
227 src/GLIArchitectureTemplate.py:
228 only install filesystem tools for partitions with a mountpoint
229
230 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
231 add error catching and text to saving profile dialogs
232
233 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
234 src/GLIPortage.py:
235 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
236 src/templates/x86ArchitectureTemplate.py:
237 fix checks for changed partitions so they will actually get deleted
238
239 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIClientController.py:
241 slightly better error handling for pre-install failures
242
243 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/templates/x86ArchitectureTemplate.py:
245 proper return code checking for ext2/3 resizing
246
247 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
248 src/GLIClientController.py:
249 accept 'none' as well as 'null' for network type
250 src/GLIArchitectureTemplate.py:
251 ignore extended partitions in mount_local_partitions()
252 src/templates/x86ArchitectureTemplate.py:
253 use get_ordered_partition_list() instead of keys().sort() for new_part_list
254 check to make sure start sector for primary isn't less than end sector for
255 previous extended
256 src/GLIClientController.py:
257 write dns servers to /etc/resolv.conf
258
259 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
260 src/GLIPortage.py:
261 copy_pkg_to_chroot() uses compile_output.log for command output
262
263 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
264 only keep a 1000 line 'scrollback' buffer for the compile output and log file
265
266 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
267 src/GLIPortage.py:
268 add code make GLIPortage.py capable of being run stand-along for dynamic
269 stage3 generation and copying packages in a GRP-ish way
270 grp code fixups
271
272 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
273 src/GLIPortage.py:
274 ignore blank packages passed to get_deps() and emerge()
275
276 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
277 src/GLIUtility.py:
278 add get_chosts() function
279
280 *GLI-0.3 (12 Feb 2006)
281
282 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
283 src/templates/x86ArchitectureTemplate.py:
284 pull old start/end sector values from somewhere that actually has them
285 add logic for extended partition to code that makes sure new end sector
286 doesn't overlap start sector of next partitions
287 don't freak out if partition can't be deleted
288
289 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
290 src/GLIPortage.py:
291 run env-update at the end of copy_pkg_to_chroot()
292
293 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
294 src/templates/x86ArchitectureTemplate.py:
295 I'm a complete fscking dumbass. I recorded the end sector for partitions that
296 weren't being touched, but I never used it when recreating them...the end was
297 calculated from the size in MB instead :/
298
299 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
300 src/GLIArchitectureTemplate.py:
301 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
302 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
303 src/GLIPortage.py:
304 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
305 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
306 'resized' flag
307
308 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
309 src/GLIPortage.py:
310 short circuit and check vdb directly if package begins with '='
311
312 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
313 added more packages to extra_packages list in IP
314
315 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
316 src/templates/x86ArchitectureTemplate.py:
317 10 tries to create filesystem instead of 3
318 src/GLIPortage, src/GLIArchitectureTemplate.py:
319 ignore_missing flag for copy_pkg_to_chroot()
320
321 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
322 src/GLIPortage.py:
323 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
324
325 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
326 src/net/server/gliserv.py:
327 fix handling of 404 for real files
328 src/net/server/GLIServerProfile.py:
329 look for 'hostname' in attributes instead of 'name'
330
331 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
332 src/SimpleXMLParser.py:
333 initial support for 'include' in XML files
334 src/GLIStorageDevice.py:
335 initial support for %
336 src/GLIClientController.py:
337 add debugging statements to pre-install steps
338
339 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
340 webgli/configfiles:
341 check for key in etc_files['rc.conf'] to fix key error
342 webgli/timezone: small fix.
343 webgli/extrapackages: list-type fix
344 webgli/services: same
345 glimd: add/edit_client updates.
346
347 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
348 added configure.pyhtml to glimd. minor changes
349 to top and add_client. fixed up showargs.
350 added execute.pyhtml
351 changed register clients line in gliserv for name->hostname.
352 updated TODO.
353
354 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
355 src/net/server/*:
356 added add/del/edit client/profile.pythml for glimd.
357 updated templates, showclients, and gliserv.
358
359 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
360 src/net/server/*:
361 stupid threading module...
362
363 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
364 AT: rc.conf -> conf.d/clock
365
366 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
367 src/GLIPortage.py:
368 show 'Calculating dependencies for ...' in subprogress bar at beginning of
369 emerge()
370 src/GLIArchitectureTemplate.py:
371 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
372 in the chroot
373 remove _quickpkg_deps() and _portage_best_{visible,version}()
374 src/GLIUtility.py:
375 fail immediately in validate_uri() if provided URI can't be parsed
376 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
377 debug code in spawn()
378 use lower-level os.read() instead of file.read() because python sucks
379 src/templates/x86ArchitectureTemplate.py:
380 basic subprogress reporting for partitioning
381 total_steps was 1 too high
382
383 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
384 src/GLIUtility.py:
385 move parse_vdb_contents() to GLIPortage
386 src/GLIPortage.py:
387 remove all symlink fixups
388 ignore 'dir' entries in CONTENTS
389 call tar with -p
390
391 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
392 AT: bootsplash is now gensplash
393 gliserv: add advanced_mode to shared_info
394 webgli: Added advanced mode. mostly just disables a few screens.
395
396 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
397 src/GLIPortage.py:
398 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
399 added emerge()
400 update sub-progress after each package is emerged
401 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
402 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
403 remove link if it exists before moving content into place
404 src/GLIArchitectureTemplate.py:
405 install_packages() now calls emerge() in GLIPortage
406 change all calls to self._emerge() to self._portage.emerge()
407 comment out all emerge status checking...using exceptions now
408 call copy_pkg_to_chroot() directly for livecd-kernel
409
410 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
411 src/GLIArchitectureTemplate.py:
412 remove add_pkg_to_world() and copy_pkg_to_chroot()
413 copy installer.log to installer.log.failed on install failure
414 src/GLIUtility.py:
415 added get_keymaps()
416 spawn() takes any False argument for chroot instead of just None
417 src/GLIPortage.py:
418 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
419 change copy_pkg_to_chroot() to work properly with use_root=False
420 figure PORTAGE_TMPDIR properly
421
422 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
423 src/net/server/html/*:
424 converted showclients, load/saveprofile
425
426 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
427 src/GLIPortage.py:
428 exclude packages already in chroot vdb from binary deplist
429 chroot to use best_version for chroot's vdb
430 src/runtimedeps.py:
431 accept ROOT via commandline instead of env
432
433 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
434 src/runtimedeps.py:
435 remove passing of ROOT
436 src/GLIPortage.py:
437 modify get_deps() to get deptree for each package and merge into final list
438 remove depgraph class
439 add debugging code to get_deps()
440 src/GLIArchitectureTemplate.py:
441 combine code for GRP/compile in install_packages() into one block
442 debugging code in install_packages()
443
444 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
445 src/runtimedeps.py:
446 initial commit
447 src/GLIPortage.py:
448 use separate script for GRP deps
449 remove calls to portage module
450
451 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
452 src/GLIPortage.py:
453 initial commit
454 move some of portage function from GLIAT
455 flipped around a few function args
456 src/GLIArchitectureTemplate.py:
457 revamp install_packages() for new GLIPortage
458
459 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
460 src/GLIArchitectureTemplate.py:
461 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
462
463 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
464 src/net/server/gliserv.py:
465 wrap generated code in a class to isolate it a bit better
466 302 redirects work
467 don't use cgi.escape() for <% %>
468 src/net/server/html/webgli/*:
469 load/save profile
470 src/GLIUtility.py:
471 change /sbin/lspci to just lspci
472
473 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
474 src/GLIClientController.py:
475 change ordering of statements in CC run() while loop to not go past the end
476 of the array
477 src/GLIArchitectureTemplate.py:
478 removed redundant bind mounts
479
480 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
481 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
482 added a diagram by blackace from last night.
483 added the glossary in RTF format.
484
485 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
486 x86AT: separated out emerge/configure from running of bootloader
487 added MBR drive support to lilo.
488 these changes will likely not work.
489 AT: added setup_and_run_bootloader step.
490
491 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
492 src/net/server/gliserv.py:
493 call generated code in a function
494 src/net/server/html/webgli/*:
495 include top/bottom
496 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
497 src/GLIClientCongifuration.py:
498 install mode magic
499
500 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
501 src/GLIClientController.py:
502 use GLIException when there's an import problem
503 added debug code to show install_steps
504 src/templates/amd64ArchitectureTemplate.py:
505 add . to import path
506 proper path this time: ../../templates
507 src/GLIArchitectureTemplate.py:
508 add _portage_best_version() function
509
510 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
511 added initial glossary and gimli diagram to the docs directory.
512 modify gli-dialog to allow editing of the install_profile after loading XML.
513
514 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
515 src/net/server/html/webgli/:
516 converted globaluse, localuse, networkmounts, portagetree, and stageselection
517 moved saveclientconfig stuff into clientconfig
518 moved saveconfigfiles into config files
519 converted etc_portage and makedotconf
520 converted bootloader and kernel
521 convert daemons, extrapackages, networking, review, services, timezone, users
522 src/net/server/gliserv.py:
523 proper 404 handling for .pyhtml extension
524 HTML escape <% %> stuff
525 work around python's sucky regexes
526 src/GLIInstallProfile.py:
527 allow set_{rsync,ftp,http}_proxy() to accept empty values
528
529 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
530 src/net/server/gliserv.py:
531 initial commit of Legolas templating engine
532 302 redirects
533 src/net/server/html/index.html, src/net/server/webgli_template.html:
534 minor changes for new code
535 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
536 initial commit of the conversion from the monolithic WebGLIHandler.py to the
537 one file per path Legolas goodness
538 partitioning[2-4] done
539
540 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
541 webgli: dhcp options in CC and post-install.
542 updated comparison chart.
543 webgli: etc/portage/* and distcc support added. not too-well tested.
544
545 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
546 webgli_template.html: valign=top on left side.
547 webgli: fix bootloader boot_device. now working.
548 webgli: CC proxy done. post-install proxy in progress.
549
550 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
551 src/net/server/webgli_template.html:
552 increase padding for content cell to 7px and add colspan=2
553
554 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
555 webgli: added graphic bar on top
556 webgli: added hover effects on the links on the left
557 webgli: re-rendered header_bg.png to stretch without artifacts
558
559 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
560 webgli: make.conf disabling fixes for dynamic_stage3
561 fixed portage snapshot browse popup
562 all changes tested.
563 webgli: add debug mode to CC screen. the screen still needs lots of work.
564
565 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
566 added debug mode question to gli-dialog
567 added CC proxies to CC networking for gli-dialog
568 webgli: fixed skip CC networking if connection active
569 webgli: portage snapshot defaults to CD
570 webgli: bootloader mbr drive selection
571 webgli: USE flags unselectable if dynamic_stage3
572 webgli: manual extra packages and save button.
573
574 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
575 src/GLIUtility.py:
576 change ping count to 2
577 docs/comparison.html
578 initial commit
579
580 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 src/templates/x86ArchitectureTemplate.py:
582 fix map() issue with grub code
583 replace kernel_names and initrd_names loops with one-liners
584
585 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
586 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
587 initial gli-dialog support for recommended partitioning layout and clear.
588 failure cleanup now an option for gli-dialog.
589 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
590 added comparison list and updated TODO!
591
592 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 src/GLIArchitectureTemplate.py:
594 fix to stage1() debug code
595 fix to stage2() debug code
596
597 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
598 some more bootloader code fixes. forgot boot_device != mbr_device.
599
600 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
601 src/GLIStorageDevice.py:
602 fix to unallocated space merging when last one is after part 4
603
604 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
605 src/GLIArchitectureTemplate.py:
606 small fix to debugging code in copy_pkg_to_chroot()
607
608 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
609 more bugfixes with bootloader code
610 gli-dialog side appears to work
611
612 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
613 initial adding of boot_device to backend.
614 initial boot_device support added to gli-dialog.
615 some fixes of my poor coding
616
617 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
618 converted gli-dialog to use the install_package_list.
619 gtkfe has already been converted by AllanonJL
620 new way working in gli-dialog now and added to webgli.
621 added set/get_boot_device() to IP
622
623 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
624 get_install_package_list added to InstallProfile. This can be used by the FEs
625
626 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
627 src/templates/x86ArchitectureTemplate.py:
628 call ls with '-1 --color=no'
629
630 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
631 added warning (#9) to GRP ppl about stage3 tarballs
632
633 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
634 src/GLIArchitectureTemplate.py:
635 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
636 confused
637
638 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
639 removed protocols from rc.conf screens
640 finished initial rc.conf and make.conf in webgli
641
642 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
643 src/net/server/gliserv.py:
644 add -h option to usage()
645 show time and request URI in debug mode
646 show client IP in debug mode
647 just use IP instead of trying to do a reverse lookup
648
649 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
650 src/net/server/gliserv.py:
651 'classier' 401 message
652 proper commandline parsing
653 help via -h
654 user/pass can be specificed via commandline option
655
656 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
657 src/net/server/gliserv.py:
658 basic HTTP auth
659
660 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
661 src/net/server/gliserv.py:
662 dynamic module reloading (yipee!)
663 send 'Last-Modified' header for real files
664 respond to HEAD with just headers
665 src/net/server/handlers/WebGLIHandler.py:
666 icons for drives
667
668 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
669 src/net/server/handlers/WebGLIHandler.py:
670 initial 'pretty' partition table display support
671 clicking partition in 'pretty' display works instead of radio buttons
672 radio buttons and pretty display work together
673 META redirect instead of javascript
674 pretty display stretches across entire screen
675 'Recommended layout' and 'Clear drive' functions
676 properly catch exceptions from do_recommended()
677 src/GLIArchitectureTemplate.py:
678 replace preinst, copy, postinst, rm steps with qmerge
679 whoops...that shouldn't have been commented out
680 create image_dir with -p in copy_pkg_to_chroot()
681 more generic of symlink crappiness
682 new copy_pkg_to_chroot() actually works now
683
684 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
685 src/GLIStorageDevice.py:
686 initial generic disk support
687 fixes for add_partition() code
688 src/net/server/handlers/WebGLIHandler.py:
689 added support for creating generic disks
690 add new partition working
691 save and delete partitions
692
693 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
694 webgli: Partitioning making progress.
695
696 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
697 src/GLIArchitectureTemplate.py:
698 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
699 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
700 dir) and works around /etc/gconf symlink problem
701
702 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
703 webgli: lots of updates. preliminary partitioning. extra packages works.
704
705 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
706 src/net/server/gliserv.py:
707 httpd now supports HTTPS and falls back to HTTP if not available
708 make fallback actually work
709 src/net/server/SecureXMLRPCServer.py:
710 SecureSocketServer is now threaded
711
712 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
713 src/net/client/gliclient.py:
714 try to use HTTPS for XMLRPC first and fallback to HTTP
715 pretend mode
716 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
717 HTTPS XMLRPC goodness from samyron
718 pass name of certificate
719
720 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
721 wegli: daemons and services screens done.
722
723 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
724 webgli: networking and users screens
725 added return_redirect to handler.py
726 loading and saving install/client profiles works for webgli now
727 Review also done
728
729 *GLI-0.2 (27 Oct 2005)
730
731 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
732 src/templates/x86ArchitectureTemplate.py:
733 properly check for bootloader emerge exist status with exitsuccess()
734 log output of grub install command
735 add --batch --no-floppy to grub command
736 grubinstallstring only gets logged if debug is on
737 src/GLIUtility.py:
738 update progress bar to 100% when process finishes
739
740 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
741 src/GLIClientController.py:
742 added debugging code for the interaction between the 2 threads via Event()
743 src/GLIUtility.py:
744 doubled the buffer size in spawn()
745 bump buffer size up to 16384
746 only report progress in 5% increments
747 src/GLIArchitectureTemplate.py:
748 kernelpkgs.txt support code
749 above disabled because it sucks
750 added add_pkg_to_world()
751
752 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
753 src/GLIArchitectureTemplate.py:
754 use tar | tar to copy files in copy_pkg_to_chroot()
755 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
756
757 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
758 DEBUGGING ADDED TO AT. verbose field added to CConfig.
759
760 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
761 src/net/server/gliserv.py:
762 / maps to index.html
763 look for actual files in html/
764 src/net/html:
765 new template
766 src/GLIUtility.py:
767 added parse_vdb_contents()
768 src/GLIArchitectureTemplate.py:
769 added copy_pkg_to_chroot()
770 added debug code to dynamic-stage3
771 switch dynamic-stage3 to new method
772 lots of bug fixes from adding debug code
773
774 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
775 webgli initial bootloader support + changed make.conf.
776 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
777
778 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
779 src/GLIUtility.py:
780 horrible tangled mess of code that is tarball unpacking subprogress display
781 add unpack progress to portage snapshot
782 use read() instead of readlines() in spawn()
783 only update progress bar for whole percents
784
785 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 src/templates/x86ArchitectureTemplate.py:
787 change call to 'grub' to use GLIUtility.exitsuccess()
788 add definition of 'build_mode' in _configure_lilo()
789 src/misc/updategtkfe, src/misc/updateglid:
790 fix so subshell is called in root shell
791
792 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
793 src/net/server/handlers/WebGLIHandler.py:
794 stage screen launches URI browser in sized window with various properties set
795
796 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
797 src/misc/updategtkfe:
798 updated to actually work
799 remove previous snapshot and extracted dir before downloading
800 src/misc/updateglid:
801 updated to actually work
802 src/templates/x86ArchitectureTemplate.py:
803 fixed bug where grub code was looking for 'root+root+file_name2'
804
805 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
806 src/net/server/handlers/WebGLIHandler.py:
807 URI browser
808 added mirror selection
809 src/GLIUtility.py:
810 ls via ssh strips off ending *
811
812 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
813 more updates to webgli. stage selection.
814
815 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
816 updated webgli with preliminary Network Mounts support.
817
818 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
819 GenDialog: string formatting and yes/no label fixes.
820 added WebGLI template for gliserv.py
821 added WebGLIHandler as well as a definition for it in gliserv.py
822 updates to the webgli files even though they won't be there for long.
823 Utility: remove exception for non-existant grppkgs.txt until the new livecd
824 goes public.
825
826 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
827 src/net/server/gliserv.py:
828 override dict to not be so anal
829 main server now loads separate module to handle requests
830 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
831 split out profile URLs into separate handler function
832 move handlers into subdirectory
833 add Welcome and Clients handlers
834
835 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 src/GLIUtility.py:
837 raise exception if password prompt received twice
838
839 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
840 src/GLIUtility.py:
841 removed rot13ify()
842
843 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
844 src/net/server/gliserv.py:
845 allow for param to be passed multiple times in GET
846 no XMLRPC functions return None
847 modify POST request parsing to only create a list if needed
848 fix GET request parsing so the list creation for multiple values works
849 src/net/client/gliclient.py:
850 various typo and type mismatch fixes
851 exit after exception
852
853 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
854 src/net/client/gliclient.py:
855 initial commit
856 pass MAC to XMLRPC functions
857 src/net/server/GLIServerProfile.py:
858 rename GLIClientsProfiles to GLIServerProfile
859
860 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
861 src/net/server/gliserv.py:
862 now handles POST requests
863 move majority of request handling code to common_handler() to reduce code
864 duplication
865 profile loading
866 client reg via XMLRPC goes into SharedInfo()
867 /showclients redesign
868 template fixes
869 allow handler functions to add/change headers
870 save profile
871
872 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
873 src/net/server/GLIClientsProfiles.py:
874 initial commit
875 src/net/server/template.html:
876 initial commit
877 src/net/server/gliserv.py:
878 add template mojo
879
880 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
881 src/net/server/gliserv.py:
882 XMLRPC mojo
883
884 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
885 src/GLIArchitectureTemplate.py:
886 add code in _edit_config() to comment line where variable is defined
887 previously
888 insert new line under previous definition of variable if it exists
889 small _edit_config() cleanup
890 src/GLIStorageDevice.py:
891 add clear_partitions() function
892 new sizes for recommended partition layout
893 automatically calculate swap size for recommended layout
894
895 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
896 src/templates/x86ArchitectureTemplate.py:
897 fat16 mojo
898
899 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
900 src/GLIStorageDevice.py:
901 prevent do_recommended() from being run twice
902 rewrite do_recommended() to be more robust
903 src/GLIArchitectureTemplate.py:
904 rework _edit_config() to not write duplicate entries
905
906 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
907 src/GLIStorageDevice.py:
908 added do_recommended() function to automatically created 256M/1G/* layout
909
910 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
911 src/gli-dialog.py: added set_distcc to the list
912 GenDialog: added set_distcc. untested.
913 IP: added install_distcc flag.
914 AT: added install_distcc function based on the flag. runs after build_kernel
915 changed AT spawn command for distcc for nodeps.
916
917 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
918 src/GLIUtility.py:
919 add rot13ify() function
920
921 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
922 src/GenDialog.py:
923 added a sentence of text. unchecking support added.
924
925 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
926 src/GLIUtility.py:
927 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
928 src/GenDialog.py:
929 still working on extra_packages. transformed the list to new format.
930 added GRP indication to list. untested.
931 TODO lists updated.
932 src/fe/dialog/gli-dialog.py:
933 spelling mistook.
934
935 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
936 src/GLIUtility.py:
937 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
938
939 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/GLIUtility.py:
941 add get_directory_listing_from_uri()
942 add http support to above
943 add ftp support to above
944 add scp support to above
945 src/GLIArchitectureTemplate.py:
946 "0" instead of 0 for key of single-element dict passed to _edit_config()
947
948 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
949 value_only -> only_value
950
951 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
952 gutted out all of etc_portage structure since it is now all handled by
953 etc_files
954
955 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
956 src/GLIArchitectureTemplate.py:
957 install_packages() sends progress update notifications
958 src/templates/x86ArchitectureTemplate.py:
959 increase sleep to 5s between format tries
960 src/GLIClientController.py:
961 pass 'self' to AT instead of 'self._pretend'
962
963 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
964 logger -> logger.log in x86AT
965
966 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
967 added set_etc_portage to IP. debugging gli-d's support for it.
968
969 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
970 src/templates/x86ArchitectureTemplate.py:
971 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
972
973 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
974 src/GLIArchitectureTemplate.py:
975 add _portage_best_version() function and rework install_packages() to allow
976 for future X of Y tracking
977 Use best_visible instead of best_version
978 tracked down and fixed missing = causing empty install extra packages
979 use = when emerging also
980 quickpkg hokey pokey
981 run _get_packages_to_emerge() again with -pk
982
983 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
984 src/ArchTemplate:
985 removed install_xorg_x11, and put the xorg.conf copying at
986 the end of install_packages.
987 added updateglid to /src/misc
988 updated all core files with new GPL notice and copyright statement.
989
990 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
991 src/GLIUtility.py:
992 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
993 a snapshot in /mnt/cdrom/snapshots/
994 get_snapshot_from_cd() adds file:// at the beginning
995 change calls to extra package special case functions to 'self.blah'
996
997 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
998 src/ArchTemplate: changed "voodoo".
999 changed order of portage sync methods. made a fallback to webrsync if
1000 normal emerge sync fails.
1001 removed get_sources_from_cd because it is obsolete.
1002 add special cases to install_packages. remove fatal exception on package
1003 install failure b/c the box will still be bootable.
1004 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1005 handled in the FEs.
1006 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1007 awaiting testing.
1008
1009 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1010 src/GLIStorageDevice.py:
1011 global try/except block around fs resizable detection code
1012 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1013 install-failed cleanup function
1014
1015 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1016 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1017
1018 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1019 GLIGenDialog:
1020 add drive choices for loaded configs.
1021 force snapshot for dynamic_stage3
1022 init the snapshoturi input to the cd snapshot if not already selected.
1023 if dynamic_stage3, skip the make.conf step.
1024 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1025 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1026
1027 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1028 src/GLIArchitectureTemplate.py:
1029 manually call MAKEDEV in stage3-dynamic code
1030 copy /etc/inittab.old to /etc/inittab in chroot
1031 src/GLIUtility.py:
1032 add beginning of validate_uri() function
1033 add file:/// support to validate_uri()
1034 single quotes when setting livecd password
1035
1036 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1037 src/GLIGenDialog.py:
1038 change getmountpoint() to get_mountpoint()
1039 src/misc/updategtkfe:
1040 committed script to automatically download latest snapshot and run gtkfe
1041 src/templates/x86ArchitectureTemplate.py:
1042 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1043 src/GLIArchitectureTemplate.py:
1044 give tmp_minor an initial value in mount_local_partitions so that the value
1045 remain from the previous drive
1046
1047 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1048 src/templates/x86ArchitectureTemplate.py:
1049 Fix _configure_lilo() for IP using GLISD stuff
1050 src/GLIArchitectureTemplate.py:
1051 install_cron_daemon() treats "none" specially
1052
1053 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1054 old patch from Steven Mertens to resolve bug #96642
1055 numerous asthetic changes to GenDialog, no real functionality changes though.
1056 strings renamed for global use if necessary.
1057 fix all three parts of bug 102291
1058 disable set_etc_portage until fully-written.
1059
1060 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1061 src/GLIClientController.py:
1062 lower-case http/ftp proxy envvars
1063
1064 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1065 src/GLIClientController.py:
1066 log end of pre_install steps to aid in debugging
1067 src/templates/x86ArchitectureTemplate.py:
1068 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1069
1070 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1071 src/GLIArchitectureTemplate.py:
1072 check to make sure that the device node we're wait for to exist isn't of
1073 type 'free'
1074
1075 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1076 src/GLIGenDialog.py:
1077 convert install_packages to list in set_extra_packages()
1078 check return code of checklist() call in "Manual" section
1079 *actually* fix the first problem
1080
1081 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1082 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1083 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1084
1085 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1086 src/GLIArchitectureTemplate.py:
1087 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1088
1089 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1090 Add CDATA support to SimpleXMLParser and add utility functions for it.
1091
1092 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1093 src/GLIArchitectureTemplate.py:
1094 Fix case where vixie-cron is specified as a full package atom, as we still
1095 don't want to run 'crontab /etc/crontab' for it.
1096
1097 *GLI-0.1 (3 Aug 2005)
1098
1099 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1100 add scp to list of is_uri() so GenDialog doesn't complain.
1101 fixed livecd-kernel bug in bootloader code.
1102 fixed gendialog for dynamic_stage3 instead of "networkless"
1103 change bootloader to allow for both initrd and initramfs.
1104 fix IP for dynamic_stage3.
1105 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1106
1107 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1108 Added full scp:// URI support to get_uri() in GLIUtility
1109 Remove "networkless" from dynamic stage3 if locic.
1110 Remove print statement from scp:// code.
1111 Change scp code to check for "assword: " instead of "Password:"
1112 Fix post-install network code to create net.eth1+ symlink correctly
1113 Check to make sure pkg can be split on / and some debugging code
1114 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1115 SimpleXMLParser handles True/False/None correctly now
1116 Comment out above fix
1117 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1118
1119 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1120 Removed a FIXME in the GLIClientConfiguration that is no
1121 longer needed.
1122
1123 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1124 Default to x86 in ClientConfig
1125 Typo in build-a-stage3 code.
1126 Remove MAKEDEV call in build-a-stage3 postscript.
1127
1128 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1129 Rewrote init of IP for gli-d. Other GenDialog updates.
1130 allow network_type to be None in CConfig.
1131
1132 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1133 Add _dynamic_stage3 option to IP.
1134 Add check for that option to dynamic stage3 code in ArchTemplate.
1135 Fix code to determine default route in get_eth_info() in GLIUtility.
1136 Fix serialization of dns-servers in ClientConfig.
1137
1138 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1139 changed default values of cron/logger in IP.
1140 moved GenDialog IP init out to the individual files. gli-dialog's version
1141 will change quite a bit.
1142
1143 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1144 added ppcArchTemplate. blank now. working on yaboot.
1145 modified ArchTemplate for amd64 and ppc custom kernels.
1146 skeleton implementation of _configure_yaboot.
1147 small fixes to other templates.
1148
1149 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1150 GenDialog updates. changed comment in IP.
1151
1152 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1153 src/GLIInstallProfile.py:
1154 Fix codeman's screwup of changing the service seperator to ',' in the parser
1155 without changing it in the serialization code! Also document this in a
1156 comment so you find it easier. Everybody needs to make sure they update
1157 their install profiles!
1158
1159 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1160 src/GLIArchitectureTemplate.py:
1161 Fix casting of list to string and concat of None with string, as well as
1162 commented prototype of checking that mounting actually worked (found a case
1163 where mount can return success, but the mount won't be done).
1164
1165 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1166 src/templates/x86ArchitectureTemplate.py:
1167 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1168 checking for the device, and sleeping 1 second each time.
1169
1170 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1171 src/templates/x86ArchitectureTemplate.py:
1172 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1173 bootloader works again. Also rename _install_{grub,lilo} to
1174 _configure_{grub,lilo} since they don't install the loaders anymore
1175 themselves.
1176
1177 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1178 fix global USE flags to not include the arch types at the end.
1179 updates to GenDialog and gli-d.
1180
1181 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1182 fixing bootloader code for no initrd and initrd->initramfs naming change.
1183
1184 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1185 Proper comments and parameters to GLIException in install_mta()
1186 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1187 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1188 list_tarball_from_mirror() to eliminate blank last item.
1189
1190 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1191 Added stage3 generation code.
1192
1193 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1194 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1195 Mild changes to GenDialog.
1196
1197 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1198 Remove separate install step configure_rc_conf() since it's handled by
1199 update_config_files()
1200 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1201 function is called twice on the same file.
1202
1203 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1204 Missing \ in sed in _get_packages_to_emerge()
1205 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1206 Check in _quickpkg_deps() to ignore blank package names returned from
1207 _get_packages_to_emerge()
1208
1209 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1210 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1211 in the dialog.py gauge code.
1212
1213 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1214 Add code to update_config_files() to go through etc_files and update stuff.
1215 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1216 Only use float() in partition xml parsing code if type == "free"
1217
1218 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1219 finished almost all internationalization of GenDialog.
1220 attempt at fixing rc.conf function. moved 3 generate functions out of
1221 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1222 added dialog.py to the fe/dialog directory so it actually gets used.
1223
1224 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1225 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1226
1227 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1228 fix extra entry in list_mirrors()
1229 beginning internationalization runthrough.
1230
1231 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1232 added dialog.py to /src temporarily until it gets accepted upstream.
1233 fix for unused value in form in dialog.py and changed heights.
1234 fix GenDialog forms.
1235
1236 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1237 Changed hostname/domainname for new baselayout.
1238 Changed _add_to_runlevel errors to logs.
1239 Updated TODO list to show status of GenDialog
1240 More updates to GenDialog including two checklists that probably won't work.
1241 update IP to use comma-separated list instead of space separated for services.
1242
1243 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1244 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1245 GenDialog as it gets closer to completion.
1246
1247 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1248 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1249 instead of int() in add_partition_device_partition() for minor (closes 96804)
1250
1251 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1252 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1253 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1254 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1255
1256 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1257 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1258 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1259 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1260 Fix undefined variable 'output' issue in spawn().
1261
1262 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1263 More updates to GenDialog and gli-d.
1264
1265 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1266 Modify list_mirrors() to return a list of mirror URL/name pairs.
1267
1268 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1269 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1270 get subarch.
1271
1272 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1273 Backend partitioning will create disklabel is none exists. Installprofile
1274 defaults to "" now instead of "msdos" for disklabel type. Fix for
1275 mount_local_partitions() to remember device along with minor in the
1276 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1277 add else block to log unsupported netmount types to mount_network_shares()
1278
1279 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1280 src/GLIArchitectureTemplate.py:
1281 Refactor kernel_compile common stuff, fix 2.4 build process.
1282 src/fe/cli/clife.py:
1283 Logging system.
1284 src/GLIUtility.py, src/GLIStorageDevice.py:
1285 Add comments about re-writes needed for boxes without sysfs.
1286
1287 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1288 src/GLIArchitectureTemplate.py:
1289 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1290 'make dep' call for custom compile. build_mode support for prepare-only and
1291 none types completed. custom compile function chains shell functions in
1292 spawned script, to allow for catching all errors.
1293
1294 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1295 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1296 and GenDialog. other gendialog updates as well. kernel updates untested.
1297
1298 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1299 src/GLIInstallProfile.py:
1300 Change structure of etc-portage stuff. The serialization was broken before my
1301 last commit, and I am the only person that's ever used it. The new schema is
1302 as follows:
1303 <etc-portage>
1304 <file name="package.mask"/>
1305 <file name="package.unmask">
1306 <entry atom="sys-kernel/openmosix-sources"/>
1307 </file>
1308 <file name="package.use">
1309 <entry atom="sys-libs/db">
1310 -java
1311 </entry>
1312 <entry atom="dev-libs/cyrus-sasl">
1313 -ldap
1314 </entry>
1315 </file>
1316 </etc-portage>
1317
1318
1319 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1320 src/GLIInstallProfile.py:
1321 Add new entry for gli-profile/kernel-build-method item. Add missing
1322 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1323 keys in the same order.
1324
1325 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1326 src/GLIArchitectureTemplate.py:
1327 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1328 was repeatedly appended to make.conf.
1329
1330 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1331 src/GLIArchitectureTemplate.py:
1332 Put some Linux-2.6 specific code under a if statement. Store list of
1333 successfully mounted swap device for using swapoff. Add proper error checking
1334 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1335 'file'. Clean up some redundant code (thanks to pychecker).'
1336
1337 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1338 Fix typos: get_extended() instead of get_extended_partition(). Added
1339 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1340 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1341
1342 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1343 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1344 in add_network_interface.
1345
1346 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1347 src/GLIArchitectureTemplate.py:
1348 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1349 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1350 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1351 prepare_chroot.
1352
1353 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1354 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1355 +src/fe/installer-gtk:
1356 Add new automated CLI frontend. Add scripts that are the intended means to
1357 use each frontend.
1358
1359 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1360 src/GLIClientController.py:
1361 Add null type to network config, for cases where the interface is already up
1362 and should not be touched (netboot for example).
1363
1364 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1365 src/GLIArchitectureTemplate.py:
1366 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1367 string!. Try to use binary packages if available by default.
1368
1369 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1370 src/GLIArchitectureTemplate.py:
1371 More error checking for _add_to_runlevel, to ensure that the init script
1372 actually exists before we try to add it. set_services phase must take place
1373 after the package installation, otherwise the init scripts might not exist.
1374 Find the correct init script for the cron and logging daemons, and add that
1375 instead of the package atom.
1376
1377 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1378 src/GLIArchitectureTemplate.py:
1379 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1380 usage of 'file' to 'contents' for the variable name, as it shadows
1381 __builtin__.file.
1382
1383 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1384 src/GLIArchitectureTemplate.py:
1385 Add MTA install code, and include MTA install phase. Ensure
1386 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1387 for 'none' kernel config for build_kernel phase. Put kernel_script in
1388 /var/tmp instead of /root for build_kernel phase.
1389
1390 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1391 Rename mta variables to match syslog/cron variables.
1392
1393 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1394 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1395 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1396 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1397 src/templates/.cvsignore, src/tests/.cvsignore:
1398 Refactor partition formatting again to include error checking. Allow 'none'
1399 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1400
1401 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1402 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1403 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1404 only have a single spawn call.
1405
1406 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1407 refixed samyron's fix of set_architecture_template.
1408
1409 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1410 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1411 be executable.
1412
1413 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1414 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1415 error checking when you call set_architecture_template.
1416
1417 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1418 moved the mkfsopts input to the partition options menu instead of the during
1419 the creation process. updated GenDialog to say it supports reiserfs v3.
1420
1421 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1422 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1423 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1424 Add support for other partition types to dialogfe.
1425 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1426 avoid integer overflows and wraparounds.
1427
1428 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1429 Removed start/end from XML output and added mkfsopts to partitioning info.
1430 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1431 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1432 in GLIClientConfiguration. Change from .1 and .9 to constants for
1433 partitioning. Fix free space overwriting bug. Remove a few unused functions
1434 from rewrite. Fix call to get_partition_at()
1435
1436 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1437 Updates to GenDialog and dialogfe.
1438
1439 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1440 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1441
1442 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1443 more GenDialog updates to partitioning.
1444
1445 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1446 Indenting issue in GLISD/get_ordered_partition_list.
1447 updates to GenDialog partitioning and added default UTC for timezone in IP.
1448
1449 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1450 Added GLISD.get_model()
1451
1452 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1453 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1454 More updates to GenDialog :)
1455
1456 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1457 Added get_interface_realname() function.
1458
1459 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1460 Added auto-save of CConfig and copying to new /root after install.
1461 yet even more GenDialog updates.
1462
1463 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1464 removed print statement from GLISD. more updates to GenDialog.
1465
1466 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1467 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1468 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1469 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1470 places in GLIClientConfiguration.
1471
1472 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1473 Fix mount_local_partitions(), configure_fstab(), and
1474 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1475 A few more fixes for templates/x86Archtemplate
1476
1477 27 May 2005; Preston Cody <codeman@gentoo.org> :
1478 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1479 a work in progress.
1480
1481 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1482 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1483 directly. GLISD can now handle data imported from XML.
1484
1485 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1486 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1487 handle blank (no disklabel) disks.
1488
1489 20 May 2005; Preston Cody <codeman@gentoo.org> :
1490 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1491 up, documented, and separated out serialization and grouped all sections.
1492
1493 19 May 2005; Preston Cody <codeman@gentoo.org> :
1494 Reorganization of ClientConfiguration and gutting of unused functions.
1495 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1496
1497 18 May 2005; Preston Cody <codeman@gentoo.org> :
1498 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1499
1500 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1501 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1502 partitioning. CC serializes install profile to disk and prepare_chroot()
1503 copies it into /mnt/gentoo/root
1504
1505 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1506 Moved URI parsing into new function parse_uri()
1507
1508 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1509 Added XMLParser module.
1510
1511 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1512 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1513 Minor fix to is_uri() regex to allow hyphens in hostname.
1514
1515 12 May 2005; Preston Cody <codeman@gentoo.org> :
1516 Updated finishing_cleanup for new unmounting method from agaffney.
1517
1518 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1519 Fix GLILogger to use correct time format string. Fix _edit_config() to
1520 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1521 unicode support to is_realstring().
1522
1523 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1524 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1525 return value instead of non-zero. Add code to output a traceback to the
1526 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1527 instead of --nocolor.
1528
1529 10 May 2005; Preston Cody <codeman@gentoo.org> :
1530 Added GLIGenDialog.py to make a generic class for the dialog functions that
1531 can be used by both dialogfe and the netfe/be. updated both for new filename.
1532 date changes. 2004->2005.
1533
1534 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1535 Removed 'quiet=True' from spawn() calls
1536
1537 10 May 2005; Preston Cody <codeman@gentoo.org> :
1538 Updated GLIUtility with patches from chotchki. Also added documentation
1539
1540 9 May 2005; Preston Cody <codeman@gentoo.org> :
1541 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1542 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1543 from bug #89683, mostly touchups.
1544
1545 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1546 GLIStorageDevice cleanup patch from bug #91761
1547
1548 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1549 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1550 _edit_config(). Error logging casts 'error' to str
1551
1552 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 Exceptions received in CC are logged before being passed to the FE. Added
1554 code to CC to handle exceptions *not* thrown by the installer itself.
1555
1556 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1557 get_max_mb_for_resize() returns -1 if not self.resizeable
1558
1559 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1560 More dirty rsync hacks :-/
1561
1562 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1563 Patches from chotchki (bug #90325) to improve CC networking. untested.
1564
1565 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1566 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1567 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1568 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1569 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1570 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1571 _get_packages_to_emerge()
1572
1573 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1574 Added group-adding code to set_users in ArchTemplate
1575
1576 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1577 Added post-install script code
1578
1579 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1580 Fixed encapsulation issues in GLIClientController (bug #90141)
1581
1582 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1583 Update resizing code in GLIStorageDevice
1584
1585 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1586 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1587
1588 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Reverted change to ArchTemplate and added support for commented line in old
1590 code.
1591
1592 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1593 Changed _edit_config() to modify value in-place instead of commenting out and
1594 adding the new value to the end of the file.
1595
1596 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1597 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1598 Also updated TODO list.
1599
1600 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1601 Use blackace's one-liner to add comments for all function for use with
1602 pythondoc.
1603
1604 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1605 Moved 'end >= device_sectors' check out of loop to check for next partition's
1606 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1607 Partitioning code now tracks start/end of extended for placing logicals. End
1608 point of logical is now adjusted along with start.
1609
1610 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1611 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1612 the way of partitioning from a blank disk. Add int() around access to minor
1613 key in partition information due to new partition code leaving them as float.
1614
1615 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1617
1618 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1619 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1620
1621 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1622 Added support for DHCP options and MAC addresses in the InstallProfile.
1623
1624 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1625 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1626 sed to properly strip out junk.
1627
1628 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1629 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1630 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1631
1632 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1633 Fixed indent problem in GLICController
1634
1635 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1636 Check for disklabel type "loop" and use the device name without a minor.
1637
1638 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1639 Remove /tmp/compile_output.log and /var/log/install.log when install is
1640 complete. Added code to (hopefully) keep 2nd thread running after install.
1641 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1642 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1643 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1644
1645 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1646 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1647 when unpacking tarball.
1648
1649 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1650 rewrote filesystem_tools. looks like it works so ripping out all the old
1651 filesystem_tools code.
1652
1653 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1654 Changed the print statements to logging in the partitioning BE code.
1655 the logger may need to be imported to the x86archtemplate. unknown yet.
1656 Added the finishing_cleanup function.
1657 added a fix to the logger from BenUrban
1658
1659 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1661 URIs. The blank uri check has been commented out.
1662 ripped out error checking of set_services. this is done by _add_to_runlevel.
1663
1664 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1665 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1666
1667 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1668 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1669 the install profile if available. Commented out spawn() debugging prints
1670
1671 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1672 small changes to setup_network_post. moved adding to runlevel of net.x to
1673 after the device gets symlinked. added domainname runlevel command.
1674
1675 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1676 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1677 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1678 spawn() call in livecd-kernel code to pass environment variables.
1679 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1680 the install profile if available.
1681
1682 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1683 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1684 to handle installing the livecd kernel into the new system.
1685
1686 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1687 should emerge hotplug and coldplug before adding them to runlevel.
1688
1689 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1690 took chroot out of grub_install command.
1691
1692 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1693 Changed chroot wrapper code in spawn() to write the wrapper the python way
1694 instead of the bash way to avoid quote conflicts. Added
1695 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1696 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1697 as it breaks the piping.
1698
1699 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1700 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1701
1702 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1703 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1704 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1705 GLIInstallProfile.
1706
1707 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1708 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1709 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1710 into /mnt/gentoo in prepare_chroot()
1711
1712 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1713 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1714 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1715 to start/end sectors
1716
1717 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1718 Add 2>&1 to cmd in spawn()
1719
1720 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1721 Modified GLIUtility.exitsuccess() to work with return value from
1722 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1723 creates wrapper script for commands run inside chroot so multiple commands
1724 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1725 for the generated script from spawn()
1726
1727 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1728 Removed default values for stage tarball URI and portage tree URI from
1729 InstallProfile. These should be set by the FEs. also added services step to
1730 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1731 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1732
1733 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1734 Small fix for setting the default gateway. Also added feature to dialogfe.
1735
1736 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1737 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1738
1739 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1740 Fixed a bunch of true -> True typos. lots of em
1741 only write new resolv.conf if there are dns servers listed.
1742
1743 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1744 Commented out 'display_on_tty8=True' in start_portmap()
1745
1746 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1747 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1748
1749 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1750 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1751 lang parameter to __init__()
1752
1753 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1754 updates to TODO list.
1755
1756 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1757 Initial code for quickpkg GRP support. Fix loop to grab packages from
1758 'emerge -p blah'
1759
1760 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1761 check for dhcp in the network stuff and emerge it if it is.
1762 added quickpkg to TODO list
1763
1764 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1765 Changed the raising of 'warning' exceptions to a simple log of the error
1766 so that the installer can continue.
1767
1768 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1769 Some big changes. First, changed most output to display_on_tty8.
1770 Second, added log lines to all templates. Some smaller fixes such as typos.
1771 Also did some cleanups of old commented lines.
1772
1773 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1774 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1775 Undo change with fix. Escaping fix in GLIStorageDevice.py
1776
1777 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1778 more updates to TODO list. hopefully we'll soon start removing items instead
1779 of adding them.
1780
1781 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1782 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1783
1784 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1785 updated TODO list. (again)
1786
1787 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1788 changed output of portmap start to display_on_tty8.
1789 fixed bootloader for udev and multiple kernels
1790 fixed custom kernel config (again)
1791
1792 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1793 changed default value of CC._enable_ssh to True because this is smart.
1794 added code to allow custom kernel .config. may be unstable and break. sorry.
1795
1796 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1797 partition() now waits until after it checks for partition flags before delete
1798 the partitions :P
1799
1800 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1801 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1802 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1803 blank.
1804
1805 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1806 Various fixes related to the add_users function. Still not yet finished.
1807 Added things to the TODO list. Lets start using that!
1808
1809 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1810 Added code to x86Template to format newly created partitions. Also added
1811 some error checking code. GLIStorageDevice passes 'minor' with data to
1812 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1813 mounting code.
1814
1815 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1816 Took out unnecessary setting of random livecd root password. the cd already
1817 sets it randomly.
1818
1819 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1820 Took out an unneeded step from CC's run()
1821
1822 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1823 Attempt at detecting and adding windows partitions to lilo.
1824
1825 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1826 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1827 partition. fixed misc exit_status => exitstatus typo.
1828
1829 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1830 Added basic code for resizing filesystems with pyparted. Fixed code for
1831 resizing ntfs and ext2/3.
1832
1833 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1834 Fixed partition() in x86Template so that it scans through logicals and deletes
1835 before deleting containing extended partition. Also clears partition table to
1836 be safe before third pass.
1837
1838 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1839 Added mount_network_shares. not able to test it from this computer.
1840 will test when i get back to school.
1841 also added start_portmap to the client_controller as an always-do.
1842 agaffney says this is needed for NFS mounts to work.
1843
1844 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1845 Partial rewrite of partitioning code in x86Template. No longer shells out to
1846 parted to perform actions, now uses all pyparted calls. Code "works" in a
1847 test, but still needs lots of TLC. Also modified tests/install.py to work
1848 with x86Template and GLIClientConfiguration.
1849
1850 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1851 Initial move of partitioning code from ArchTemplate to x86Template.
1852
1853 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1854 Added grp_install and services to InstallProfile. forgot about the set_root_password
1855
1856 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1857 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1858 agaffney. Test Install ran very well (skipping partitioning).
1859
1860 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1861 My mid-day update. rewrote mount_local_partitions for order of mounting.
1862 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1863 partition format. fixed a few _edit_configs. some may still have eluded me.
1864
1865 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1866 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1867 to test it.
1868 Just finished mount_local_partitions in GLIArchitectureTemplate
1869
1870 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1871 Added get_num_sectors() to GLIStorageDevice.
1872
1873 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1874 GLIStorageDevice now tracks partition boundaries in sectors instead of
1875 cylinders.
1876 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1877 from GLIInstallProfile.
1878
1879 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1880 GLIStorageDevice returns "unknown" instead of "" for get_type()
1881
1882 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1883 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1884 actually work. Commented out resizability checking code for speed.
1885
1886 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1887 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1888 in GLIStorageDevice at the suggestion of plors
1889
1890 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1891 Added a function to GLIUtility to pull a value from a make.conf-style config
1892 file. Minor type fix to GLIInstallProfile.py
1893
1894 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1895 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1896 Separated network mounts from partition data structure in GLIInstallProfile
1897
1898 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1899 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1900 can be resized.
1901
1902 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1903 Added some of the final functions to GLIInstallTemplate.
1904 Yes this project is still active despite rare use of the Changelog!
1905
1906 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1907 Added the GLIPartitionTools.py file. This is a temporary insertion of
1908 partitioning tools that will eventually go into their own package.
1909
1910 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1911 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1912 run-time for the program). Added __init__(install_profile,
1913 client_configuration) to GLI.InstallProfile. This sets install_profile and
1914 client_configuration once so as to avoid constantly passing stuff every time
1915 we call a method.
1916
1917 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1918
1919 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1920 config files without messing up all the other stuff in them. This will be
1921 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1922
1923 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1924
1925 Added GLI.InstallTemplate framework. This is not yet functional. However,
1926 it does have a few basic things. I added two private methods. One is
1927 _depends(). This will be used for dependency checking (ie. unpacking a
1928 tarball requires that partitioning has been done). The other is
1929 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1930 instead of being run in the liveCD environment, it runs in the chroot. This
1931 requires a bit of fork() magic, so I isolated the code. Hope to work more
1932 this week to get this class formed...
1933
1934 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1935 Added SAX parsing. Made GLI.InstallProfile a subclass of
1936 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1937 to be lists instead of tuples to allow for easier modification (mutable,
1938 rather than immutable objects). Updated existing pydoc and added more.
1939 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1940 GLI.py a bit. Fixed all accessors to use self references.
1941 Added initial unit test code.
1942
1943 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1944 Added initial changelog. Setting up the basic structure of the CVS repository
1945 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1946 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20