/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1492 - (show annotations) (download)
Mon Aug 7 12:11:46 2006 UTC (7 years, 8 months ago) by agaffney
File size: 80597 byte(s)
  src/GLIArchitectureTemplate.py:
  copy backup custom.conf from livecd if present

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.671 2006/08/07 12:11:46 agaffney Exp $
4
5 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 copy backup custom.conf from livecd if present
8
9 *GLI-0.4 (31 Jul 2006)
10
11 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
12 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
13 doing the testing and coming up with the patch.
14
15 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
16 src/GLIArchitectureTemplate.py:
17 skip blank entries/files in update_config_files()
18
19 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/templates/x86ArchitectureTemplate.py:
21 move logical clipping logic a bit
22
23 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
24 I've commented out most of the code that used launch. It wasn't working and
25 we don't have the time to fix it before the release. I'll look into it after
26 the release and make it more robust and flexible.
27
28 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
29 src/templates/x86ArchitectureTemplate.py:
30 clip logical partition at end of extended
31
32 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
33 src/GLIInstallProfile.py:
34 Added a few more applications to the list of extra packages to be merged,
35 all from various GRP sets.
36
37 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
38 Added launch variable to the end of each try-run with auth, which should
39 cause this to function properly. Of course, more testing is needed.
40
41 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
42 Fix a missed space in the installer script.
43
44 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
45 src/GLIClientConfiguration.py:
46 adding 'None' with capital N so that the frontends can parse the network type
47
48 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
49 src/GLIClientController.py:
50 log version-stamp
51
52 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
53 Updated the installer script to allow specifying the front-end to run from
54 the command line. Currently, it only supports dialog and gtk. It still needs
55 some testing, however.
56
57 9 July 2006; Preston Cody <codeman@gentoo.org>
58 src/GLIGenDialog.py:
59 make lilo only show up for x86 if non-networkless
60
61 25 Jun 2006; Preston Cody <codeman@gentoo.org>
62 src/GLIGenDialog.py:
63 adding code to auto-add doscsi if a scsi drive detected.
64 this code is also in the gtkfe already
65
66 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/GLIPortage.py:
68 pass proper PORTAGE_TMPDIR
69
70 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
71 src/GLIUtility.py:
72 fix list_mirrors() to ignore <uri> lines that don't end on the same line
73
74 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
75 Added code to the mta step in AT to parse the install packages list and
76 look for mtas and if it finds it emerge it.
77 Initial attempt at moving extra_packages early in the setup to only show
78 local USE flags relating to those packages.
79 .. abandoned local USE project. no right way to do it.
80
81 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
82 src/GLIUtility.py:
83 minor tweak to regex for parsing mirrors.xml
84
85 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
86 src/templates/x86ArchitectureTemplate.py:
87 make use of strict_start and strict_end in partition recreation
88
89 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
90 src/templates/x86ArchitectureTemplate.py:
91 add strict_start and strict_end parameters to _add_partition()
92 add _find_current_minor_for_part() function to help with resizing
93 fix logical/extended logic in _partition_delete_step()
94 in _partition_resize_step(), delete, recreate at new size, resize, delete
95 call resize2fs with no size argument so it fills entire partition
96 more logging
97 only delete, recreate, resize, delete if growing
98 pass new size to resize2fs in K
99
100 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
101 src/GLIStorageDevice.py:
102 call reorder_minors() from tidy_partitions() instead of
103 set_partitions_from_disk()
104 add code to reorder_minors() to take extended/logical into consideration with
105 non-free partitions
106
107 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
108 added a check of the length of the directory in /usr/src if under 6 characters
109 should fix bug 131809
110
111 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
112 src/GLIArchitectureTemplate.py:
113 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
114 and livecd-kernel
115
116 16 Apr 2006; Preston Cody <codeman@gentoo.org>
117 src/GLIGenDialog.py:
118 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
119
120 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
121 src/GLIInstallProfile.py:
122 change kernel-modules to not be so stupid
123
124 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
125 GLIMD: fix display problem with execute.pyhtml.
126 make tables better.
127
128 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
129 src/GLIInstallProfile.py:
130 fix handling of int/float for minor
131 src/templates/x86ArchitectureTemplate.py:
132 save/restore partition name
133 src/GLIStorageDevice.py:
134 support for partition name
135
136 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
137 touchups to add_profile in GLIMD to link to webgli
138 add a save to GLIMD profile button in webgli's saveprofile
139 gliserv.py:
140 initial attempt at custom networking info per client. hostname support only.
141
142 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
143 src/net/server/html/webgli/partitioning[234].pyhtml:
144 small fixes for new partioning code
145
146 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
147 src/GLIClientController.py:
148 record PID of secondary thread
149
150 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIGenDialog.py:
152 small fix for new partitioning code
153
154 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
155 src/GLIStorageDevice.py:
156 add get_devnode()
157 fix up detect_devices() to detect cciss/ida arrays
158 src/templates/x86ArchitectureTemplate.py:
159 use get_devnode() instead of figuring out the devnode
160 skip first 3 steps if partition layout hasn't changed
161 wipe disk and create new disklabel before recreating partitions
162 src/GLIArchitectureTemplate.py:
163 use get_devnode() in local mount and fstab stuff
164
165 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIStorageDevice.py:
167 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
168
169 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py:
171 continue breakup/cleanup of partitioning code
172
173 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIStorageDevice.py:
175 set disklabel to default for arch when clearing the partition table
176 src/templates/x86ArchitectureTemplate.py:
177 complete rewrite of first and second passes
178
179 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
180 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
181 allow iterating over Device object to get partitions
182
183 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIStorageDevice.py:
185 allow access to Device object like a dict
186
187 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
188 src/GLIStorageDevice.py:
189 allow access to Partition object like a dict
190
191 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
192 src/templates/x86ArchitectureTemplate.py:
193 fail if any filesystems are mounted on the device being partitioned
194
195 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
196 src/GLIStorageDevice.py:
197 reorder minor numbers when loading partitions from disk to match the physical
198 partition order
199
200 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
201 src/GLIStorageDevice.py:
202 overhaul for supporting mac disklabels and partitions out of disk order
203 remove free space from inside extended partition when extended is removed
204
205 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
206 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
207 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
208 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
209 Added bash scripts, icons, and desktop entries from the ebuild to make my
210 life easier.
211
212 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
213 src/GLIStorageDevice.py:
214 raise an exception if the existing partitions are out of disk order
215 look for minors out of order instead of disk position
216
217 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
218 src/fe/dialog/gli-dialog and src/GLIGenDialog:
219 added networkless mode to gli-dialog.
220
221 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
222 src/templates/x86AT:
223 add windows detection code for grub. untested.
224
225 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
226 src/templates/x86ArchitectureTemplate.py:
227 bootloader and partitioning external commands log to compile_output.log
228 wait for device node to exist before resizing
229 add -v to ntfsresize command
230 src/GLIStorageDevice.py:
231 return start/end with ip structure
232 pad min ntfs size by 50 MB just to be safe
233 src/GLIArchitectureTemplate.py:
234 only install filesystem tools for partitions with a mountpoint
235
236 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
237 add error catching and text to saving profile dialogs
238
239 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIPortage.py:
241 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
242 src/templates/x86ArchitectureTemplate.py:
243 fix checks for changed partitions so they will actually get deleted
244
245 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
246 src/GLIClientController.py:
247 slightly better error handling for pre-install failures
248
249 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
250 src/templates/x86ArchitectureTemplate.py:
251 proper return code checking for ext2/3 resizing
252
253 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
254 src/GLIClientController.py:
255 accept 'none' as well as 'null' for network type
256 src/GLIArchitectureTemplate.py:
257 ignore extended partitions in mount_local_partitions()
258 src/templates/x86ArchitectureTemplate.py:
259 use get_ordered_partition_list() instead of keys().sort() for new_part_list
260 check to make sure start sector for primary isn't less than end sector for
261 previous extended
262 src/GLIClientController.py:
263 write dns servers to /etc/resolv.conf
264
265 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
266 src/GLIPortage.py:
267 copy_pkg_to_chroot() uses compile_output.log for command output
268
269 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
270 only keep a 1000 line 'scrollback' buffer for the compile output and log file
271
272 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
273 src/GLIPortage.py:
274 add code make GLIPortage.py capable of being run stand-along for dynamic
275 stage3 generation and copying packages in a GRP-ish way
276 grp code fixups
277
278 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
279 src/GLIPortage.py:
280 ignore blank packages passed to get_deps() and emerge()
281
282 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
283 src/GLIUtility.py:
284 add get_chosts() function
285
286 *GLI-0.3 (12 Feb 2006)
287
288 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
289 src/templates/x86ArchitectureTemplate.py:
290 pull old start/end sector values from somewhere that actually has them
291 add logic for extended partition to code that makes sure new end sector
292 doesn't overlap start sector of next partitions
293 don't freak out if partition can't be deleted
294
295 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 src/GLIPortage.py:
297 run env-update at the end of copy_pkg_to_chroot()
298
299 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
300 src/templates/x86ArchitectureTemplate.py:
301 I'm a complete fscking dumbass. I recorded the end sector for partitions that
302 weren't being touched, but I never used it when recreating them...the end was
303 calculated from the size in MB instead :/
304
305 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
306 src/GLIArchitectureTemplate.py:
307 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
308 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
309 src/GLIPortage.py:
310 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
311 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
312 'resized' flag
313
314 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
315 src/GLIPortage.py:
316 short circuit and check vdb directly if package begins with '='
317
318 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
319 added more packages to extra_packages list in IP
320
321 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
322 src/templates/x86ArchitectureTemplate.py:
323 10 tries to create filesystem instead of 3
324 src/GLIPortage, src/GLIArchitectureTemplate.py:
325 ignore_missing flag for copy_pkg_to_chroot()
326
327 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
328 src/GLIPortage.py:
329 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
330
331 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
332 src/net/server/gliserv.py:
333 fix handling of 404 for real files
334 src/net/server/GLIServerProfile.py:
335 look for 'hostname' in attributes instead of 'name'
336
337 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
338 src/SimpleXMLParser.py:
339 initial support for 'include' in XML files
340 src/GLIStorageDevice.py:
341 initial support for %
342 src/GLIClientController.py:
343 add debugging statements to pre-install steps
344
345 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
346 webgli/configfiles:
347 check for key in etc_files['rc.conf'] to fix key error
348 webgli/timezone: small fix.
349 webgli/extrapackages: list-type fix
350 webgli/services: same
351 glimd: add/edit_client updates.
352
353 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
354 added configure.pyhtml to glimd. minor changes
355 to top and add_client. fixed up showargs.
356 added execute.pyhtml
357 changed register clients line in gliserv for name->hostname.
358 updated TODO.
359
360 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
361 src/net/server/*:
362 added add/del/edit client/profile.pythml for glimd.
363 updated templates, showclients, and gliserv.
364
365 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
366 src/net/server/*:
367 stupid threading module...
368
369 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
370 AT: rc.conf -> conf.d/clock
371
372 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
373 src/GLIPortage.py:
374 show 'Calculating dependencies for ...' in subprogress bar at beginning of
375 emerge()
376 src/GLIArchitectureTemplate.py:
377 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
378 in the chroot
379 remove _quickpkg_deps() and _portage_best_{visible,version}()
380 src/GLIUtility.py:
381 fail immediately in validate_uri() if provided URI can't be parsed
382 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
383 debug code in spawn()
384 use lower-level os.read() instead of file.read() because python sucks
385 src/templates/x86ArchitectureTemplate.py:
386 basic subprogress reporting for partitioning
387 total_steps was 1 too high
388
389 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
390 src/GLIUtility.py:
391 move parse_vdb_contents() to GLIPortage
392 src/GLIPortage.py:
393 remove all symlink fixups
394 ignore 'dir' entries in CONTENTS
395 call tar with -p
396
397 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
398 AT: bootsplash is now gensplash
399 gliserv: add advanced_mode to shared_info
400 webgli: Added advanced mode. mostly just disables a few screens.
401
402 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
403 src/GLIPortage.py:
404 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
405 added emerge()
406 update sub-progress after each package is emerged
407 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
408 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
409 remove link if it exists before moving content into place
410 src/GLIArchitectureTemplate.py:
411 install_packages() now calls emerge() in GLIPortage
412 change all calls to self._emerge() to self._portage.emerge()
413 comment out all emerge status checking...using exceptions now
414 call copy_pkg_to_chroot() directly for livecd-kernel
415
416 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
417 src/GLIArchitectureTemplate.py:
418 remove add_pkg_to_world() and copy_pkg_to_chroot()
419 copy installer.log to installer.log.failed on install failure
420 src/GLIUtility.py:
421 added get_keymaps()
422 spawn() takes any False argument for chroot instead of just None
423 src/GLIPortage.py:
424 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
425 change copy_pkg_to_chroot() to work properly with use_root=False
426 figure PORTAGE_TMPDIR properly
427
428 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
429 src/net/server/html/*:
430 converted showclients, load/saveprofile
431
432 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
433 src/GLIPortage.py:
434 exclude packages already in chroot vdb from binary deplist
435 chroot to use best_version for chroot's vdb
436 src/runtimedeps.py:
437 accept ROOT via commandline instead of env
438
439 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
440 src/runtimedeps.py:
441 remove passing of ROOT
442 src/GLIPortage.py:
443 modify get_deps() to get deptree for each package and merge into final list
444 remove depgraph class
445 add debugging code to get_deps()
446 src/GLIArchitectureTemplate.py:
447 combine code for GRP/compile in install_packages() into one block
448 debugging code in install_packages()
449
450 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
451 src/runtimedeps.py:
452 initial commit
453 src/GLIPortage.py:
454 use separate script for GRP deps
455 remove calls to portage module
456
457 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
458 src/GLIPortage.py:
459 initial commit
460 move some of portage function from GLIAT
461 flipped around a few function args
462 src/GLIArchitectureTemplate.py:
463 revamp install_packages() for new GLIPortage
464
465 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
466 src/GLIArchitectureTemplate.py:
467 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
468
469 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
470 src/net/server/gliserv.py:
471 wrap generated code in a class to isolate it a bit better
472 302 redirects work
473 don't use cgi.escape() for <% %>
474 src/net/server/html/webgli/*:
475 load/save profile
476 src/GLIUtility.py:
477 change /sbin/lspci to just lspci
478
479 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
480 src/GLIClientController.py:
481 change ordering of statements in CC run() while loop to not go past the end
482 of the array
483 src/GLIArchitectureTemplate.py:
484 removed redundant bind mounts
485
486 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
487 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
488 added a diagram by blackace from last night.
489 added the glossary in RTF format.
490
491 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
492 x86AT: separated out emerge/configure from running of bootloader
493 added MBR drive support to lilo.
494 these changes will likely not work.
495 AT: added setup_and_run_bootloader step.
496
497 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
498 src/net/server/gliserv.py:
499 call generated code in a function
500 src/net/server/html/webgli/*:
501 include top/bottom
502 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
503 src/GLIClientCongifuration.py:
504 install mode magic
505
506 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
507 src/GLIClientController.py:
508 use GLIException when there's an import problem
509 added debug code to show install_steps
510 src/templates/amd64ArchitectureTemplate.py:
511 add . to import path
512 proper path this time: ../../templates
513 src/GLIArchitectureTemplate.py:
514 add _portage_best_version() function
515
516 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
517 added initial glossary and gimli diagram to the docs directory.
518 modify gli-dialog to allow editing of the install_profile after loading XML.
519
520 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
521 src/net/server/html/webgli/:
522 converted globaluse, localuse, networkmounts, portagetree, and stageselection
523 moved saveclientconfig stuff into clientconfig
524 moved saveconfigfiles into config files
525 converted etc_portage and makedotconf
526 converted bootloader and kernel
527 convert daemons, extrapackages, networking, review, services, timezone, users
528 src/net/server/gliserv.py:
529 proper 404 handling for .pyhtml extension
530 HTML escape <% %> stuff
531 work around python's sucky regexes
532 src/GLIInstallProfile.py:
533 allow set_{rsync,ftp,http}_proxy() to accept empty values
534
535 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
536 src/net/server/gliserv.py:
537 initial commit of Legolas templating engine
538 302 redirects
539 src/net/server/html/index.html, src/net/server/webgli_template.html:
540 minor changes for new code
541 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
542 initial commit of the conversion from the monolithic WebGLIHandler.py to the
543 one file per path Legolas goodness
544 partitioning[2-4] done
545
546 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
547 webgli: dhcp options in CC and post-install.
548 updated comparison chart.
549 webgli: etc/portage/* and distcc support added. not too-well tested.
550
551 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
552 webgli_template.html: valign=top on left side.
553 webgli: fix bootloader boot_device. now working.
554 webgli: CC proxy done. post-install proxy in progress.
555
556 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
557 src/net/server/webgli_template.html:
558 increase padding for content cell to 7px and add colspan=2
559
560 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
561 webgli: added graphic bar on top
562 webgli: added hover effects on the links on the left
563 webgli: re-rendered header_bg.png to stretch without artifacts
564
565 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
566 webgli: make.conf disabling fixes for dynamic_stage3
567 fixed portage snapshot browse popup
568 all changes tested.
569 webgli: add debug mode to CC screen. the screen still needs lots of work.
570
571 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
572 added debug mode question to gli-dialog
573 added CC proxies to CC networking for gli-dialog
574 webgli: fixed skip CC networking if connection active
575 webgli: portage snapshot defaults to CD
576 webgli: bootloader mbr drive selection
577 webgli: USE flags unselectable if dynamic_stage3
578 webgli: manual extra packages and save button.
579
580 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 src/GLIUtility.py:
582 change ping count to 2
583 docs/comparison.html
584 initial commit
585
586 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
587 src/templates/x86ArchitectureTemplate.py:
588 fix map() issue with grub code
589 replace kernel_names and initrd_names loops with one-liners
590
591 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
592 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
593 initial gli-dialog support for recommended partitioning layout and clear.
594 failure cleanup now an option for gli-dialog.
595 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
596 added comparison list and updated TODO!
597
598 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
599 src/GLIArchitectureTemplate.py:
600 fix to stage1() debug code
601 fix to stage2() debug code
602
603 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
604 some more bootloader code fixes. forgot boot_device != mbr_device.
605
606 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/GLIStorageDevice.py:
608 fix to unallocated space merging when last one is after part 4
609
610 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/GLIArchitectureTemplate.py:
612 small fix to debugging code in copy_pkg_to_chroot()
613
614 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
615 more bugfixes with bootloader code
616 gli-dialog side appears to work
617
618 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
619 initial adding of boot_device to backend.
620 initial boot_device support added to gli-dialog.
621 some fixes of my poor coding
622
623 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
624 converted gli-dialog to use the install_package_list.
625 gtkfe has already been converted by AllanonJL
626 new way working in gli-dialog now and added to webgli.
627 added set/get_boot_device() to IP
628
629 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
630 get_install_package_list added to InstallProfile. This can be used by the FEs
631
632 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
633 src/templates/x86ArchitectureTemplate.py:
634 call ls with '-1 --color=no'
635
636 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
637 added warning (#9) to GRP ppl about stage3 tarballs
638
639 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
640 src/GLIArchitectureTemplate.py:
641 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
642 confused
643
644 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
645 removed protocols from rc.conf screens
646 finished initial rc.conf and make.conf in webgli
647
648 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
649 src/net/server/gliserv.py:
650 add -h option to usage()
651 show time and request URI in debug mode
652 show client IP in debug mode
653 just use IP instead of trying to do a reverse lookup
654
655 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
656 src/net/server/gliserv.py:
657 'classier' 401 message
658 proper commandline parsing
659 help via -h
660 user/pass can be specificed via commandline option
661
662 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
663 src/net/server/gliserv.py:
664 basic HTTP auth
665
666 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
667 src/net/server/gliserv.py:
668 dynamic module reloading (yipee!)
669 send 'Last-Modified' header for real files
670 respond to HEAD with just headers
671 src/net/server/handlers/WebGLIHandler.py:
672 icons for drives
673
674 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
675 src/net/server/handlers/WebGLIHandler.py:
676 initial 'pretty' partition table display support
677 clicking partition in 'pretty' display works instead of radio buttons
678 radio buttons and pretty display work together
679 META redirect instead of javascript
680 pretty display stretches across entire screen
681 'Recommended layout' and 'Clear drive' functions
682 properly catch exceptions from do_recommended()
683 src/GLIArchitectureTemplate.py:
684 replace preinst, copy, postinst, rm steps with qmerge
685 whoops...that shouldn't have been commented out
686 create image_dir with -p in copy_pkg_to_chroot()
687 more generic of symlink crappiness
688 new copy_pkg_to_chroot() actually works now
689
690 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
691 src/GLIStorageDevice.py:
692 initial generic disk support
693 fixes for add_partition() code
694 src/net/server/handlers/WebGLIHandler.py:
695 added support for creating generic disks
696 add new partition working
697 save and delete partitions
698
699 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
700 webgli: Partitioning making progress.
701
702 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
703 src/GLIArchitectureTemplate.py:
704 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
705 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
706 dir) and works around /etc/gconf symlink problem
707
708 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
709 webgli: lots of updates. preliminary partitioning. extra packages works.
710
711 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
712 src/net/server/gliserv.py:
713 httpd now supports HTTPS and falls back to HTTP if not available
714 make fallback actually work
715 src/net/server/SecureXMLRPCServer.py:
716 SecureSocketServer is now threaded
717
718 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
719 src/net/client/gliclient.py:
720 try to use HTTPS for XMLRPC first and fallback to HTTP
721 pretend mode
722 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
723 HTTPS XMLRPC goodness from samyron
724 pass name of certificate
725
726 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
727 wegli: daemons and services screens done.
728
729 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
730 webgli: networking and users screens
731 added return_redirect to handler.py
732 loading and saving install/client profiles works for webgli now
733 Review also done
734
735 *GLI-0.2 (27 Oct 2005)
736
737 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
738 src/templates/x86ArchitectureTemplate.py:
739 properly check for bootloader emerge exist status with exitsuccess()
740 log output of grub install command
741 add --batch --no-floppy to grub command
742 grubinstallstring only gets logged if debug is on
743 src/GLIUtility.py:
744 update progress bar to 100% when process finishes
745
746 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
747 src/GLIClientController.py:
748 added debugging code for the interaction between the 2 threads via Event()
749 src/GLIUtility.py:
750 doubled the buffer size in spawn()
751 bump buffer size up to 16384
752 only report progress in 5% increments
753 src/GLIArchitectureTemplate.py:
754 kernelpkgs.txt support code
755 above disabled because it sucks
756 added add_pkg_to_world()
757
758 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
759 src/GLIArchitectureTemplate.py:
760 use tar | tar to copy files in copy_pkg_to_chroot()
761 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
762
763 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
764 DEBUGGING ADDED TO AT. verbose field added to CConfig.
765
766 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
767 src/net/server/gliserv.py:
768 / maps to index.html
769 look for actual files in html/
770 src/net/html:
771 new template
772 src/GLIUtility.py:
773 added parse_vdb_contents()
774 src/GLIArchitectureTemplate.py:
775 added copy_pkg_to_chroot()
776 added debug code to dynamic-stage3
777 switch dynamic-stage3 to new method
778 lots of bug fixes from adding debug code
779
780 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
781 webgli initial bootloader support + changed make.conf.
782 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
783
784 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
785 src/GLIUtility.py:
786 horrible tangled mess of code that is tarball unpacking subprogress display
787 add unpack progress to portage snapshot
788 use read() instead of readlines() in spawn()
789 only update progress bar for whole percents
790
791 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
792 src/templates/x86ArchitectureTemplate.py:
793 change call to 'grub' to use GLIUtility.exitsuccess()
794 add definition of 'build_mode' in _configure_lilo()
795 src/misc/updategtkfe, src/misc/updateglid:
796 fix so subshell is called in root shell
797
798 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
799 src/net/server/handlers/WebGLIHandler.py:
800 stage screen launches URI browser in sized window with various properties set
801
802 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
803 src/misc/updategtkfe:
804 updated to actually work
805 remove previous snapshot and extracted dir before downloading
806 src/misc/updateglid:
807 updated to actually work
808 src/templates/x86ArchitectureTemplate.py:
809 fixed bug where grub code was looking for 'root+root+file_name2'
810
811 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
812 src/net/server/handlers/WebGLIHandler.py:
813 URI browser
814 added mirror selection
815 src/GLIUtility.py:
816 ls via ssh strips off ending *
817
818 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
819 more updates to webgli. stage selection.
820
821 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
822 updated webgli with preliminary Network Mounts support.
823
824 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
825 GenDialog: string formatting and yes/no label fixes.
826 added WebGLI template for gliserv.py
827 added WebGLIHandler as well as a definition for it in gliserv.py
828 updates to the webgli files even though they won't be there for long.
829 Utility: remove exception for non-existant grppkgs.txt until the new livecd
830 goes public.
831
832 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
833 src/net/server/gliserv.py:
834 override dict to not be so anal
835 main server now loads separate module to handle requests
836 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
837 split out profile URLs into separate handler function
838 move handlers into subdirectory
839 add Welcome and Clients handlers
840
841 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
842 src/GLIUtility.py:
843 raise exception if password prompt received twice
844
845 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/GLIUtility.py:
847 removed rot13ify()
848
849 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
850 src/net/server/gliserv.py:
851 allow for param to be passed multiple times in GET
852 no XMLRPC functions return None
853 modify POST request parsing to only create a list if needed
854 fix GET request parsing so the list creation for multiple values works
855 src/net/client/gliclient.py:
856 various typo and type mismatch fixes
857 exit after exception
858
859 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
860 src/net/client/gliclient.py:
861 initial commit
862 pass MAC to XMLRPC functions
863 src/net/server/GLIServerProfile.py:
864 rename GLIClientsProfiles to GLIServerProfile
865
866 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
867 src/net/server/gliserv.py:
868 now handles POST requests
869 move majority of request handling code to common_handler() to reduce code
870 duplication
871 profile loading
872 client reg via XMLRPC goes into SharedInfo()
873 /showclients redesign
874 template fixes
875 allow handler functions to add/change headers
876 save profile
877
878 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
879 src/net/server/GLIClientsProfiles.py:
880 initial commit
881 src/net/server/template.html:
882 initial commit
883 src/net/server/gliserv.py:
884 add template mojo
885
886 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
887 src/net/server/gliserv.py:
888 XMLRPC mojo
889
890 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
891 src/GLIArchitectureTemplate.py:
892 add code in _edit_config() to comment line where variable is defined
893 previously
894 insert new line under previous definition of variable if it exists
895 small _edit_config() cleanup
896 src/GLIStorageDevice.py:
897 add clear_partitions() function
898 new sizes for recommended partition layout
899 automatically calculate swap size for recommended layout
900
901 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
902 src/templates/x86ArchitectureTemplate.py:
903 fat16 mojo
904
905 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/GLIStorageDevice.py:
907 prevent do_recommended() from being run twice
908 rewrite do_recommended() to be more robust
909 src/GLIArchitectureTemplate.py:
910 rework _edit_config() to not write duplicate entries
911
912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
913 src/GLIStorageDevice.py:
914 added do_recommended() function to automatically created 256M/1G/* layout
915
916 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
917 src/gli-dialog.py: added set_distcc to the list
918 GenDialog: added set_distcc. untested.
919 IP: added install_distcc flag.
920 AT: added install_distcc function based on the flag. runs after build_kernel
921 changed AT spawn command for distcc for nodeps.
922
923 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/GLIUtility.py:
925 add rot13ify() function
926
927 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
928 src/GenDialog.py:
929 added a sentence of text. unchecking support added.
930
931 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
932 src/GLIUtility.py:
933 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
934 src/GenDialog.py:
935 still working on extra_packages. transformed the list to new format.
936 added GRP indication to list. untested.
937 TODO lists updated.
938 src/fe/dialog/gli-dialog.py:
939 spelling mistook.
940
941 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
942 src/GLIUtility.py:
943 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
944
945 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
946 src/GLIUtility.py:
947 add get_directory_listing_from_uri()
948 add http support to above
949 add ftp support to above
950 add scp support to above
951 src/GLIArchitectureTemplate.py:
952 "0" instead of 0 for key of single-element dict passed to _edit_config()
953
954 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
955 value_only -> only_value
956
957 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
958 gutted out all of etc_portage structure since it is now all handled by
959 etc_files
960
961 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
962 src/GLIArchitectureTemplate.py:
963 install_packages() sends progress update notifications
964 src/templates/x86ArchitectureTemplate.py:
965 increase sleep to 5s between format tries
966 src/GLIClientController.py:
967 pass 'self' to AT instead of 'self._pretend'
968
969 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
970 logger -> logger.log in x86AT
971
972 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
973 added set_etc_portage to IP. debugging gli-d's support for it.
974
975 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
976 src/templates/x86ArchitectureTemplate.py:
977 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
978
979 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
980 src/GLIArchitectureTemplate.py:
981 add _portage_best_version() function and rework install_packages() to allow
982 for future X of Y tracking
983 Use best_visible instead of best_version
984 tracked down and fixed missing = causing empty install extra packages
985 use = when emerging also
986 quickpkg hokey pokey
987 run _get_packages_to_emerge() again with -pk
988
989 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
990 src/ArchTemplate:
991 removed install_xorg_x11, and put the xorg.conf copying at
992 the end of install_packages.
993 added updateglid to /src/misc
994 updated all core files with new GPL notice and copyright statement.
995
996 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
997 src/GLIUtility.py:
998 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
999 a snapshot in /mnt/cdrom/snapshots/
1000 get_snapshot_from_cd() adds file:// at the beginning
1001 change calls to extra package special case functions to 'self.blah'
1002
1003 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1004 src/ArchTemplate: changed "voodoo".
1005 changed order of portage sync methods. made a fallback to webrsync if
1006 normal emerge sync fails.
1007 removed get_sources_from_cd because it is obsolete.
1008 add special cases to install_packages. remove fatal exception on package
1009 install failure b/c the box will still be bootable.
1010 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1011 handled in the FEs.
1012 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1013 awaiting testing.
1014
1015 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1016 src/GLIStorageDevice.py:
1017 global try/except block around fs resizable detection code
1018 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1019 install-failed cleanup function
1020
1021 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1022 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1023
1024 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1025 GLIGenDialog:
1026 add drive choices for loaded configs.
1027 force snapshot for dynamic_stage3
1028 init the snapshoturi input to the cd snapshot if not already selected.
1029 if dynamic_stage3, skip the make.conf step.
1030 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1031 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1032
1033 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1034 src/GLIArchitectureTemplate.py:
1035 manually call MAKEDEV in stage3-dynamic code
1036 copy /etc/inittab.old to /etc/inittab in chroot
1037 src/GLIUtility.py:
1038 add beginning of validate_uri() function
1039 add file:/// support to validate_uri()
1040 single quotes when setting livecd password
1041
1042 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1043 src/GLIGenDialog.py:
1044 change getmountpoint() to get_mountpoint()
1045 src/misc/updategtkfe:
1046 committed script to automatically download latest snapshot and run gtkfe
1047 src/templates/x86ArchitectureTemplate.py:
1048 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1049 src/GLIArchitectureTemplate.py:
1050 give tmp_minor an initial value in mount_local_partitions so that the value
1051 remain from the previous drive
1052
1053 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1054 src/templates/x86ArchitectureTemplate.py:
1055 Fix _configure_lilo() for IP using GLISD stuff
1056 src/GLIArchitectureTemplate.py:
1057 install_cron_daemon() treats "none" specially
1058
1059 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1060 old patch from Steven Mertens to resolve bug #96642
1061 numerous asthetic changes to GenDialog, no real functionality changes though.
1062 strings renamed for global use if necessary.
1063 fix all three parts of bug 102291
1064 disable set_etc_portage until fully-written.
1065
1066 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1067 src/GLIClientController.py:
1068 lower-case http/ftp proxy envvars
1069
1070 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1071 src/GLIClientController.py:
1072 log end of pre_install steps to aid in debugging
1073 src/templates/x86ArchitectureTemplate.py:
1074 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1075
1076 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1077 src/GLIArchitectureTemplate.py:
1078 check to make sure that the device node we're wait for to exist isn't of
1079 type 'free'
1080
1081 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 src/GLIGenDialog.py:
1083 convert install_packages to list in set_extra_packages()
1084 check return code of checklist() call in "Manual" section
1085 *actually* fix the first problem
1086
1087 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1088 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1089 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1090
1091 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1092 src/GLIArchitectureTemplate.py:
1093 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1094
1095 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1096 Add CDATA support to SimpleXMLParser and add utility functions for it.
1097
1098 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1099 src/GLIArchitectureTemplate.py:
1100 Fix case where vixie-cron is specified as a full package atom, as we still
1101 don't want to run 'crontab /etc/crontab' for it.
1102
1103 *GLI-0.1 (3 Aug 2005)
1104
1105 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1106 add scp to list of is_uri() so GenDialog doesn't complain.
1107 fixed livecd-kernel bug in bootloader code.
1108 fixed gendialog for dynamic_stage3 instead of "networkless"
1109 change bootloader to allow for both initrd and initramfs.
1110 fix IP for dynamic_stage3.
1111 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1112
1113 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1114 Added full scp:// URI support to get_uri() in GLIUtility
1115 Remove "networkless" from dynamic stage3 if locic.
1116 Remove print statement from scp:// code.
1117 Change scp code to check for "assword: " instead of "Password:"
1118 Fix post-install network code to create net.eth1+ symlink correctly
1119 Check to make sure pkg can be split on / and some debugging code
1120 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1121 SimpleXMLParser handles True/False/None correctly now
1122 Comment out above fix
1123 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1124
1125 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1126 Removed a FIXME in the GLIClientConfiguration that is no
1127 longer needed.
1128
1129 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1130 Default to x86 in ClientConfig
1131 Typo in build-a-stage3 code.
1132 Remove MAKEDEV call in build-a-stage3 postscript.
1133
1134 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1135 Rewrote init of IP for gli-d. Other GenDialog updates.
1136 allow network_type to be None in CConfig.
1137
1138 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1139 Add _dynamic_stage3 option to IP.
1140 Add check for that option to dynamic stage3 code in ArchTemplate.
1141 Fix code to determine default route in get_eth_info() in GLIUtility.
1142 Fix serialization of dns-servers in ClientConfig.
1143
1144 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1145 changed default values of cron/logger in IP.
1146 moved GenDialog IP init out to the individual files. gli-dialog's version
1147 will change quite a bit.
1148
1149 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1150 added ppcArchTemplate. blank now. working on yaboot.
1151 modified ArchTemplate for amd64 and ppc custom kernels.
1152 skeleton implementation of _configure_yaboot.
1153 small fixes to other templates.
1154
1155 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1156 GenDialog updates. changed comment in IP.
1157
1158 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1159 src/GLIInstallProfile.py:
1160 Fix codeman's screwup of changing the service seperator to ',' in the parser
1161 without changing it in the serialization code! Also document this in a
1162 comment so you find it easier. Everybody needs to make sure they update
1163 their install profiles!
1164
1165 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1166 src/GLIArchitectureTemplate.py:
1167 Fix casting of list to string and concat of None with string, as well as
1168 commented prototype of checking that mounting actually worked (found a case
1169 where mount can return success, but the mount won't be done).
1170
1171 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1172 src/templates/x86ArchitectureTemplate.py:
1173 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1174 checking for the device, and sleeping 1 second each time.
1175
1176 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1177 src/templates/x86ArchitectureTemplate.py:
1178 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1179 bootloader works again. Also rename _install_{grub,lilo} to
1180 _configure_{grub,lilo} since they don't install the loaders anymore
1181 themselves.
1182
1183 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1184 fix global USE flags to not include the arch types at the end.
1185 updates to GenDialog and gli-d.
1186
1187 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1188 fixing bootloader code for no initrd and initrd->initramfs naming change.
1189
1190 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1191 Proper comments and parameters to GLIException in install_mta()
1192 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1193 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1194 list_tarball_from_mirror() to eliminate blank last item.
1195
1196 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1197 Added stage3 generation code.
1198
1199 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1200 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1201 Mild changes to GenDialog.
1202
1203 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1204 Remove separate install step configure_rc_conf() since it's handled by
1205 update_config_files()
1206 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1207 function is called twice on the same file.
1208
1209 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1210 Missing \ in sed in _get_packages_to_emerge()
1211 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1212 Check in _quickpkg_deps() to ignore blank package names returned from
1213 _get_packages_to_emerge()
1214
1215 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1216 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1217 in the dialog.py gauge code.
1218
1219 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1220 Add code to update_config_files() to go through etc_files and update stuff.
1221 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1222 Only use float() in partition xml parsing code if type == "free"
1223
1224 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1225 finished almost all internationalization of GenDialog.
1226 attempt at fixing rc.conf function. moved 3 generate functions out of
1227 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1228 added dialog.py to the fe/dialog directory so it actually gets used.
1229
1230 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1231 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1232
1233 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1234 fix extra entry in list_mirrors()
1235 beginning internationalization runthrough.
1236
1237 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1238 added dialog.py to /src temporarily until it gets accepted upstream.
1239 fix for unused value in form in dialog.py and changed heights.
1240 fix GenDialog forms.
1241
1242 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1243 Changed hostname/domainname for new baselayout.
1244 Changed _add_to_runlevel errors to logs.
1245 Updated TODO list to show status of GenDialog
1246 More updates to GenDialog including two checklists that probably won't work.
1247 update IP to use comma-separated list instead of space separated for services.
1248
1249 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1250 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1251 GenDialog as it gets closer to completion.
1252
1253 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1254 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1255 instead of int() in add_partition_device_partition() for minor (closes 96804)
1256
1257 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1258 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1259 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1260 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1261
1262 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1263 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1264 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1265 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1266 Fix undefined variable 'output' issue in spawn().
1267
1268 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1269 More updates to GenDialog and gli-d.
1270
1271 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1272 Modify list_mirrors() to return a list of mirror URL/name pairs.
1273
1274 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1275 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1276 get subarch.
1277
1278 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1279 Backend partitioning will create disklabel is none exists. Installprofile
1280 defaults to "" now instead of "msdos" for disklabel type. Fix for
1281 mount_local_partitions() to remember device along with minor in the
1282 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1283 add else block to log unsupported netmount types to mount_network_shares()
1284
1285 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1286 src/GLIArchitectureTemplate.py:
1287 Refactor kernel_compile common stuff, fix 2.4 build process.
1288 src/fe/cli/clife.py:
1289 Logging system.
1290 src/GLIUtility.py, src/GLIStorageDevice.py:
1291 Add comments about re-writes needed for boxes without sysfs.
1292
1293 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1294 src/GLIArchitectureTemplate.py:
1295 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1296 'make dep' call for custom compile. build_mode support for prepare-only and
1297 none types completed. custom compile function chains shell functions in
1298 spawned script, to allow for catching all errors.
1299
1300 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1301 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1302 and GenDialog. other gendialog updates as well. kernel updates untested.
1303
1304 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1305 src/GLIInstallProfile.py:
1306 Change structure of etc-portage stuff. The serialization was broken before my
1307 last commit, and I am the only person that's ever used it. The new schema is
1308 as follows:
1309 <etc-portage>
1310 <file name="package.mask"/>
1311 <file name="package.unmask">
1312 <entry atom="sys-kernel/openmosix-sources"/>
1313 </file>
1314 <file name="package.use">
1315 <entry atom="sys-libs/db">
1316 -java
1317 </entry>
1318 <entry atom="dev-libs/cyrus-sasl">
1319 -ldap
1320 </entry>
1321 </file>
1322 </etc-portage>
1323
1324
1325 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1326 src/GLIInstallProfile.py:
1327 Add new entry for gli-profile/kernel-build-method item. Add missing
1328 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1329 keys in the same order.
1330
1331 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1332 src/GLIArchitectureTemplate.py:
1333 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1334 was repeatedly appended to make.conf.
1335
1336 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1337 src/GLIArchitectureTemplate.py:
1338 Put some Linux-2.6 specific code under a if statement. Store list of
1339 successfully mounted swap device for using swapoff. Add proper error checking
1340 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1341 'file'. Clean up some redundant code (thanks to pychecker).'
1342
1343 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1344 Fix typos: get_extended() instead of get_extended_partition(). Added
1345 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1346 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1347
1348 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1349 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1350 in add_network_interface.
1351
1352 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1353 src/GLIArchitectureTemplate.py:
1354 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1355 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1356 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1357 prepare_chroot.
1358
1359 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1360 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1361 +src/fe/installer-gtk:
1362 Add new automated CLI frontend. Add scripts that are the intended means to
1363 use each frontend.
1364
1365 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1366 src/GLIClientController.py:
1367 Add null type to network config, for cases where the interface is already up
1368 and should not be touched (netboot for example).
1369
1370 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1371 src/GLIArchitectureTemplate.py:
1372 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1373 string!. Try to use binary packages if available by default.
1374
1375 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1376 src/GLIArchitectureTemplate.py:
1377 More error checking for _add_to_runlevel, to ensure that the init script
1378 actually exists before we try to add it. set_services phase must take place
1379 after the package installation, otherwise the init scripts might not exist.
1380 Find the correct init script for the cron and logging daemons, and add that
1381 instead of the package atom.
1382
1383 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1384 src/GLIArchitectureTemplate.py:
1385 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1386 usage of 'file' to 'contents' for the variable name, as it shadows
1387 __builtin__.file.
1388
1389 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1390 src/GLIArchitectureTemplate.py:
1391 Add MTA install code, and include MTA install phase. Ensure
1392 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1393 for 'none' kernel config for build_kernel phase. Put kernel_script in
1394 /var/tmp instead of /root for build_kernel phase.
1395
1396 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1397 Rename mta variables to match syslog/cron variables.
1398
1399 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1400 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1401 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1402 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1403 src/templates/.cvsignore, src/tests/.cvsignore:
1404 Refactor partition formatting again to include error checking. Allow 'none'
1405 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1406
1407 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1408 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1409 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1410 only have a single spawn call.
1411
1412 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1413 refixed samyron's fix of set_architecture_template.
1414
1415 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1416 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1417 be executable.
1418
1419 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1420 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1421 error checking when you call set_architecture_template.
1422
1423 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1424 moved the mkfsopts input to the partition options menu instead of the during
1425 the creation process. updated GenDialog to say it supports reiserfs v3.
1426
1427 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1428 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1429 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1430 Add support for other partition types to dialogfe.
1431 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1432 avoid integer overflows and wraparounds.
1433
1434 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1435 Removed start/end from XML output and added mkfsopts to partitioning info.
1436 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1437 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1438 in GLIClientConfiguration. Change from .1 and .9 to constants for
1439 partitioning. Fix free space overwriting bug. Remove a few unused functions
1440 from rewrite. Fix call to get_partition_at()
1441
1442 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1443 Updates to GenDialog and dialogfe.
1444
1445 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1446 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1447
1448 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1449 more GenDialog updates to partitioning.
1450
1451 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1452 Indenting issue in GLISD/get_ordered_partition_list.
1453 updates to GenDialog partitioning and added default UTC for timezone in IP.
1454
1455 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1456 Added GLISD.get_model()
1457
1458 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1459 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1460 More updates to GenDialog :)
1461
1462 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1463 Added get_interface_realname() function.
1464
1465 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1466 Added auto-save of CConfig and copying to new /root after install.
1467 yet even more GenDialog updates.
1468
1469 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1470 removed print statement from GLISD. more updates to GenDialog.
1471
1472 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1473 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1474 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1475 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1476 places in GLIClientConfiguration.
1477
1478 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1479 Fix mount_local_partitions(), configure_fstab(), and
1480 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1481 A few more fixes for templates/x86Archtemplate
1482
1483 27 May 2005; Preston Cody <codeman@gentoo.org> :
1484 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1485 a work in progress.
1486
1487 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1488 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1489 directly. GLISD can now handle data imported from XML.
1490
1491 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1492 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1493 handle blank (no disklabel) disks.
1494
1495 20 May 2005; Preston Cody <codeman@gentoo.org> :
1496 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1497 up, documented, and separated out serialization and grouped all sections.
1498
1499 19 May 2005; Preston Cody <codeman@gentoo.org> :
1500 Reorganization of ClientConfiguration and gutting of unused functions.
1501 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1502
1503 18 May 2005; Preston Cody <codeman@gentoo.org> :
1504 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1505
1506 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1507 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1508 partitioning. CC serializes install profile to disk and prepare_chroot()
1509 copies it into /mnt/gentoo/root
1510
1511 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1512 Moved URI parsing into new function parse_uri()
1513
1514 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1515 Added XMLParser module.
1516
1517 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1518 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1519 Minor fix to is_uri() regex to allow hyphens in hostname.
1520
1521 12 May 2005; Preston Cody <codeman@gentoo.org> :
1522 Updated finishing_cleanup for new unmounting method from agaffney.
1523
1524 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1525 Fix GLILogger to use correct time format string. Fix _edit_config() to
1526 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1527 unicode support to is_realstring().
1528
1529 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1530 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1531 return value instead of non-zero. Add code to output a traceback to the
1532 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1533 instead of --nocolor.
1534
1535 10 May 2005; Preston Cody <codeman@gentoo.org> :
1536 Added GLIGenDialog.py to make a generic class for the dialog functions that
1537 can be used by both dialogfe and the netfe/be. updated both for new filename.
1538 date changes. 2004->2005.
1539
1540 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Removed 'quiet=True' from spawn() calls
1542
1543 10 May 2005; Preston Cody <codeman@gentoo.org> :
1544 Updated GLIUtility with patches from chotchki. Also added documentation
1545
1546 9 May 2005; Preston Cody <codeman@gentoo.org> :
1547 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1548 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1549 from bug #89683, mostly touchups.
1550
1551 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1552 GLIStorageDevice cleanup patch from bug #91761
1553
1554 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1555 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1556 _edit_config(). Error logging casts 'error' to str
1557
1558 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 Exceptions received in CC are logged before being passed to the FE. Added
1560 code to CC to handle exceptions *not* thrown by the installer itself.
1561
1562 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1563 get_max_mb_for_resize() returns -1 if not self.resizeable
1564
1565 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1566 More dirty rsync hacks :-/
1567
1568 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1569 Patches from chotchki (bug #90325) to improve CC networking. untested.
1570
1571 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1572 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1573 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1574 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1575 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1576 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1577 _get_packages_to_emerge()
1578
1579 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1580 Added group-adding code to set_users in ArchTemplate
1581
1582 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1583 Added post-install script code
1584
1585 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1586 Fixed encapsulation issues in GLIClientController (bug #90141)
1587
1588 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1589 Update resizing code in GLIStorageDevice
1590
1591 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1592 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1593
1594 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1595 Reverted change to ArchTemplate and added support for commented line in old
1596 code.
1597
1598 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1599 Changed _edit_config() to modify value in-place instead of commenting out and
1600 adding the new value to the end of the file.
1601
1602 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1603 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1604 Also updated TODO list.
1605
1606 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1607 Use blackace's one-liner to add comments for all function for use with
1608 pythondoc.
1609
1610 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1611 Moved 'end >= device_sectors' check out of loop to check for next partition's
1612 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1613 Partitioning code now tracks start/end of extended for placing logicals. End
1614 point of logical is now adjusted along with start.
1615
1616 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1617 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1618 the way of partitioning from a blank disk. Add int() around access to minor
1619 key in partition information due to new partition code leaving them as float.
1620
1621 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1622 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1623
1624 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1625 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1626
1627 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1628 Added support for DHCP options and MAC addresses in the InstallProfile.
1629
1630 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1631 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1632 sed to properly strip out junk.
1633
1634 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1635 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1636 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1637
1638 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1639 Fixed indent problem in GLICController
1640
1641 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1642 Check for disklabel type "loop" and use the device name without a minor.
1643
1644 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1645 Remove /tmp/compile_output.log and /var/log/install.log when install is
1646 complete. Added code to (hopefully) keep 2nd thread running after install.
1647 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1648 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1649 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1650
1651 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1652 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1653 when unpacking tarball.
1654
1655 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1656 rewrote filesystem_tools. looks like it works so ripping out all the old
1657 filesystem_tools code.
1658
1659 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 Changed the print statements to logging in the partitioning BE code.
1661 the logger may need to be imported to the x86archtemplate. unknown yet.
1662 Added the finishing_cleanup function.
1663 added a fix to the logger from BenUrban
1664
1665 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1666 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1667 URIs. The blank uri check has been commented out.
1668 ripped out error checking of set_services. this is done by _add_to_runlevel.
1669
1670 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1671 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1672
1673 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1674 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1675 the install profile if available. Commented out spawn() debugging prints
1676
1677 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1678 small changes to setup_network_post. moved adding to runlevel of net.x to
1679 after the device gets symlinked. added domainname runlevel command.
1680
1681 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1682 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1683 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1684 spawn() call in livecd-kernel code to pass environment variables.
1685 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1686 the install profile if available.
1687
1688 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1689 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1690 to handle installing the livecd kernel into the new system.
1691
1692 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1693 should emerge hotplug and coldplug before adding them to runlevel.
1694
1695 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1696 took chroot out of grub_install command.
1697
1698 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1699 Changed chroot wrapper code in spawn() to write the wrapper the python way
1700 instead of the bash way to avoid quote conflicts. Added
1701 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1702 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1703 as it breaks the piping.
1704
1705 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1706 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1707
1708 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1709 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1710 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1711 GLIInstallProfile.
1712
1713 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1714 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1715 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1716 into /mnt/gentoo in prepare_chroot()
1717
1718 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1719 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1720 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1721 to start/end sectors
1722
1723 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1724 Add 2>&1 to cmd in spawn()
1725
1726 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1727 Modified GLIUtility.exitsuccess() to work with return value from
1728 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1729 creates wrapper script for commands run inside chroot so multiple commands
1730 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1731 for the generated script from spawn()
1732
1733 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1734 Removed default values for stage tarball URI and portage tree URI from
1735 InstallProfile. These should be set by the FEs. also added services step to
1736 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1737 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1738
1739 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1740 Small fix for setting the default gateway. Also added feature to dialogfe.
1741
1742 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1743 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1744
1745 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1746 Fixed a bunch of true -> True typos. lots of em
1747 only write new resolv.conf if there are dns servers listed.
1748
1749 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1750 Commented out 'display_on_tty8=True' in start_portmap()
1751
1752 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1753 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1754
1755 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1756 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1757 lang parameter to __init__()
1758
1759 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1760 updates to TODO list.
1761
1762 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1763 Initial code for quickpkg GRP support. Fix loop to grab packages from
1764 'emerge -p blah'
1765
1766 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1767 check for dhcp in the network stuff and emerge it if it is.
1768 added quickpkg to TODO list
1769
1770 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1771 Changed the raising of 'warning' exceptions to a simple log of the error
1772 so that the installer can continue.
1773
1774 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1775 Some big changes. First, changed most output to display_on_tty8.
1776 Second, added log lines to all templates. Some smaller fixes such as typos.
1777 Also did some cleanups of old commented lines.
1778
1779 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1780 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1781 Undo change with fix. Escaping fix in GLIStorageDevice.py
1782
1783 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1784 more updates to TODO list. hopefully we'll soon start removing items instead
1785 of adding them.
1786
1787 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1788 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1789
1790 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1791 updated TODO list. (again)
1792
1793 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1794 changed output of portmap start to display_on_tty8.
1795 fixed bootloader for udev and multiple kernels
1796 fixed custom kernel config (again)
1797
1798 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1799 changed default value of CC._enable_ssh to True because this is smart.
1800 added code to allow custom kernel .config. may be unstable and break. sorry.
1801
1802 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1803 partition() now waits until after it checks for partition flags before delete
1804 the partitions :P
1805
1806 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1807 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1808 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1809 blank.
1810
1811 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1812 Various fixes related to the add_users function. Still not yet finished.
1813 Added things to the TODO list. Lets start using that!
1814
1815 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1816 Added code to x86Template to format newly created partitions. Also added
1817 some error checking code. GLIStorageDevice passes 'minor' with data to
1818 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1819 mounting code.
1820
1821 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1822 Took out unnecessary setting of random livecd root password. the cd already
1823 sets it randomly.
1824
1825 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1826 Took out an unneeded step from CC's run()
1827
1828 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1829 Attempt at detecting and adding windows partitions to lilo.
1830
1831 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1832 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1833 partition. fixed misc exit_status => exitstatus typo.
1834
1835 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1836 Added basic code for resizing filesystems with pyparted. Fixed code for
1837 resizing ntfs and ext2/3.
1838
1839 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1840 Fixed partition() in x86Template so that it scans through logicals and deletes
1841 before deleting containing extended partition. Also clears partition table to
1842 be safe before third pass.
1843
1844 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1845 Added mount_network_shares. not able to test it from this computer.
1846 will test when i get back to school.
1847 also added start_portmap to the client_controller as an always-do.
1848 agaffney says this is needed for NFS mounts to work.
1849
1850 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1851 Partial rewrite of partitioning code in x86Template. No longer shells out to
1852 parted to perform actions, now uses all pyparted calls. Code "works" in a
1853 test, but still needs lots of TLC. Also modified tests/install.py to work
1854 with x86Template and GLIClientConfiguration.
1855
1856 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1857 Initial move of partitioning code from ArchTemplate to x86Template.
1858
1859 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1860 Added grp_install and services to InstallProfile. forgot about the set_root_password
1861
1862 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1863 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1864 agaffney. Test Install ran very well (skipping partitioning).
1865
1866 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1867 My mid-day update. rewrote mount_local_partitions for order of mounting.
1868 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1869 partition format. fixed a few _edit_configs. some may still have eluded me.
1870
1871 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1872 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1873 to test it.
1874 Just finished mount_local_partitions in GLIArchitectureTemplate
1875
1876 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1877 Added get_num_sectors() to GLIStorageDevice.
1878
1879 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1880 GLIStorageDevice now tracks partition boundaries in sectors instead of
1881 cylinders.
1882 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1883 from GLIInstallProfile.
1884
1885 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1886 GLIStorageDevice returns "unknown" instead of "" for get_type()
1887
1888 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1889 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1890 actually work. Commented out resizability checking code for speed.
1891
1892 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1893 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1894 in GLIStorageDevice at the suggestion of plors
1895
1896 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1897 Added a function to GLIUtility to pull a value from a make.conf-style config
1898 file. Minor type fix to GLIInstallProfile.py
1899
1900 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1901 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1902 Separated network mounts from partition data structure in GLIInstallProfile
1903
1904 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1905 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1906 can be resized.
1907
1908 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1909 Added some of the final functions to GLIInstallTemplate.
1910 Yes this project is still active despite rare use of the Changelog!
1911
1912 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1913 Added the GLIPartitionTools.py file. This is a temporary insertion of
1914 partitioning tools that will eventually go into their own package.
1915
1916 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1917 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1918 run-time for the program). Added __init__(install_profile,
1919 client_configuration) to GLI.InstallProfile. This sets install_profile and
1920 client_configuration once so as to avoid constantly passing stuff every time
1921 we call a method.
1922
1923 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1924
1925 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1926 config files without messing up all the other stuff in them. This will be
1927 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1928
1929 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1930
1931 Added GLI.InstallTemplate framework. This is not yet functional. However,
1932 it does have a few basic things. I added two private methods. One is
1933 _depends(). This will be used for dependency checking (ie. unpacking a
1934 tarball requires that partitioning has been done). The other is
1935 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1936 instead of being run in the liveCD environment, it runs in the chroot. This
1937 requires a bit of fork() magic, so I isolated the code. Hope to work more
1938 this week to get this class formed...
1939
1940 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1941 Added SAX parsing. Made GLI.InstallProfile a subclass of
1942 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1943 to be lists instead of tuples to allow for easier modification (mutable,
1944 rather than immutable objects). Updated existing pydoc and added more.
1945 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1946 GLI.py a bit. Fixed all accessors to use self references.
1947 Added initial unit test code.
1948
1949 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1950 Added initial changelog. Setting up the basic structure of the CVS repository
1951 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1952 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20