/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1498 - (show annotations) (download)
Thu Aug 31 15:34:59 2006 UTC (8 years, 2 months ago) by agaffney
File size: 80757 byte(s)
  src/GLIArchitectureTemplate.py:
  pass quotes_around_value=False when adding default route to conf.d/net

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.672 2006/08/31 15:34:59 agaffney Exp $
4
5 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 pass quotes_around_value=False when adding default route to conf.d/net
8
9 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
10 src/GLIArchitectureTemplate.py:
11 copy backup custom.conf from livecd if present
12
13 *GLI-0.4 (31 Jul 2006)
14
15 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
16 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
17 doing the testing and coming up with the patch.
18
19 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
20 src/GLIArchitectureTemplate.py:
21 skip blank entries/files in update_config_files()
22
23 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
24 src/templates/x86ArchitectureTemplate.py:
25 move logical clipping logic a bit
26
27 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
28 I've commented out most of the code that used launch. It wasn't working and
29 we don't have the time to fix it before the release. I'll look into it after
30 the release and make it more robust and flexible.
31
32 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
33 src/templates/x86ArchitectureTemplate.py:
34 clip logical partition at end of extended
35
36 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
37 src/GLIInstallProfile.py:
38 Added a few more applications to the list of extra packages to be merged,
39 all from various GRP sets.
40
41 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
42 Added launch variable to the end of each try-run with auth, which should
43 cause this to function properly. Of course, more testing is needed.
44
45 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
46 Fix a missed space in the installer script.
47
48 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
49 src/GLIClientConfiguration.py:
50 adding 'None' with capital N so that the frontends can parse the network type
51
52 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
53 src/GLIClientController.py:
54 log version-stamp
55
56 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
57 Updated the installer script to allow specifying the front-end to run from
58 the command line. Currently, it only supports dialog and gtk. It still needs
59 some testing, however.
60
61 9 July 2006; Preston Cody <codeman@gentoo.org>
62 src/GLIGenDialog.py:
63 make lilo only show up for x86 if non-networkless
64
65 25 Jun 2006; Preston Cody <codeman@gentoo.org>
66 src/GLIGenDialog.py:
67 adding code to auto-add doscsi if a scsi drive detected.
68 this code is also in the gtkfe already
69
70 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
71 src/GLIPortage.py:
72 pass proper PORTAGE_TMPDIR
73
74 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
75 src/GLIUtility.py:
76 fix list_mirrors() to ignore <uri> lines that don't end on the same line
77
78 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
79 Added code to the mta step in AT to parse the install packages list and
80 look for mtas and if it finds it emerge it.
81 Initial attempt at moving extra_packages early in the setup to only show
82 local USE flags relating to those packages.
83 .. abandoned local USE project. no right way to do it.
84
85 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
86 src/GLIUtility.py:
87 minor tweak to regex for parsing mirrors.xml
88
89 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
90 src/templates/x86ArchitectureTemplate.py:
91 make use of strict_start and strict_end in partition recreation
92
93 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
94 src/templates/x86ArchitectureTemplate.py:
95 add strict_start and strict_end parameters to _add_partition()
96 add _find_current_minor_for_part() function to help with resizing
97 fix logical/extended logic in _partition_delete_step()
98 in _partition_resize_step(), delete, recreate at new size, resize, delete
99 call resize2fs with no size argument so it fills entire partition
100 more logging
101 only delete, recreate, resize, delete if growing
102 pass new size to resize2fs in K
103
104 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
105 src/GLIStorageDevice.py:
106 call reorder_minors() from tidy_partitions() instead of
107 set_partitions_from_disk()
108 add code to reorder_minors() to take extended/logical into consideration with
109 non-free partitions
110
111 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
112 added a check of the length of the directory in /usr/src if under 6 characters
113 should fix bug 131809
114
115 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
116 src/GLIArchitectureTemplate.py:
117 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
118 and livecd-kernel
119
120 16 Apr 2006; Preston Cody <codeman@gentoo.org>
121 src/GLIGenDialog.py:
122 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
123
124 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/GLIInstallProfile.py:
126 change kernel-modules to not be so stupid
127
128 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
129 GLIMD: fix display problem with execute.pyhtml.
130 make tables better.
131
132 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
133 src/GLIInstallProfile.py:
134 fix handling of int/float for minor
135 src/templates/x86ArchitectureTemplate.py:
136 save/restore partition name
137 src/GLIStorageDevice.py:
138 support for partition name
139
140 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
141 touchups to add_profile in GLIMD to link to webgli
142 add a save to GLIMD profile button in webgli's saveprofile
143 gliserv.py:
144 initial attempt at custom networking info per client. hostname support only.
145
146 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
147 src/net/server/html/webgli/partitioning[234].pyhtml:
148 small fixes for new partioning code
149
150 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIClientController.py:
152 record PID of secondary thread
153
154 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
155 src/GLIGenDialog.py:
156 small fix for new partitioning code
157
158 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
159 src/GLIStorageDevice.py:
160 add get_devnode()
161 fix up detect_devices() to detect cciss/ida arrays
162 src/templates/x86ArchitectureTemplate.py:
163 use get_devnode() instead of figuring out the devnode
164 skip first 3 steps if partition layout hasn't changed
165 wipe disk and create new disklabel before recreating partitions
166 src/GLIArchitectureTemplate.py:
167 use get_devnode() in local mount and fstab stuff
168
169 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
172
173 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/templates/x86ArchitectureTemplate.py:
175 continue breakup/cleanup of partitioning code
176
177 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIStorageDevice.py:
179 set disklabel to default for arch when clearing the partition table
180 src/templates/x86ArchitectureTemplate.py:
181 complete rewrite of first and second passes
182
183 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
185 allow iterating over Device object to get partitions
186
187 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
188 src/GLIStorageDevice.py:
189 allow access to Device object like a dict
190
191 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
192 src/GLIStorageDevice.py:
193 allow access to Partition object like a dict
194
195 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
196 src/templates/x86ArchitectureTemplate.py:
197 fail if any filesystems are mounted on the device being partitioned
198
199 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
200 src/GLIStorageDevice.py:
201 reorder minor numbers when loading partitions from disk to match the physical
202 partition order
203
204 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
205 src/GLIStorageDevice.py:
206 overhaul for supporting mac disklabels and partitions out of disk order
207 remove free space from inside extended partition when extended is removed
208
209 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
210 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
211 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
212 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
213 Added bash scripts, icons, and desktop entries from the ebuild to make my
214 life easier.
215
216 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
217 src/GLIStorageDevice.py:
218 raise an exception if the existing partitions are out of disk order
219 look for minors out of order instead of disk position
220
221 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
222 src/fe/dialog/gli-dialog and src/GLIGenDialog:
223 added networkless mode to gli-dialog.
224
225 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
226 src/templates/x86AT:
227 add windows detection code for grub. untested.
228
229 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
230 src/templates/x86ArchitectureTemplate.py:
231 bootloader and partitioning external commands log to compile_output.log
232 wait for device node to exist before resizing
233 add -v to ntfsresize command
234 src/GLIStorageDevice.py:
235 return start/end with ip structure
236 pad min ntfs size by 50 MB just to be safe
237 src/GLIArchitectureTemplate.py:
238 only install filesystem tools for partitions with a mountpoint
239
240 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
241 add error catching and text to saving profile dialogs
242
243 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/GLIPortage.py:
245 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
246 src/templates/x86ArchitectureTemplate.py:
247 fix checks for changed partitions so they will actually get deleted
248
249 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
250 src/GLIClientController.py:
251 slightly better error handling for pre-install failures
252
253 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
254 src/templates/x86ArchitectureTemplate.py:
255 proper return code checking for ext2/3 resizing
256
257 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
258 src/GLIClientController.py:
259 accept 'none' as well as 'null' for network type
260 src/GLIArchitectureTemplate.py:
261 ignore extended partitions in mount_local_partitions()
262 src/templates/x86ArchitectureTemplate.py:
263 use get_ordered_partition_list() instead of keys().sort() for new_part_list
264 check to make sure start sector for primary isn't less than end sector for
265 previous extended
266 src/GLIClientController.py:
267 write dns servers to /etc/resolv.conf
268
269 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
270 src/GLIPortage.py:
271 copy_pkg_to_chroot() uses compile_output.log for command output
272
273 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
274 only keep a 1000 line 'scrollback' buffer for the compile output and log file
275
276 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
277 src/GLIPortage.py:
278 add code make GLIPortage.py capable of being run stand-along for dynamic
279 stage3 generation and copying packages in a GRP-ish way
280 grp code fixups
281
282 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
283 src/GLIPortage.py:
284 ignore blank packages passed to get_deps() and emerge()
285
286 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
287 src/GLIUtility.py:
288 add get_chosts() function
289
290 *GLI-0.3 (12 Feb 2006)
291
292 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
293 src/templates/x86ArchitectureTemplate.py:
294 pull old start/end sector values from somewhere that actually has them
295 add logic for extended partition to code that makes sure new end sector
296 doesn't overlap start sector of next partitions
297 don't freak out if partition can't be deleted
298
299 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
300 src/GLIPortage.py:
301 run env-update at the end of copy_pkg_to_chroot()
302
303 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
304 src/templates/x86ArchitectureTemplate.py:
305 I'm a complete fscking dumbass. I recorded the end sector for partitions that
306 weren't being touched, but I never used it when recreating them...the end was
307 calculated from the size in MB instead :/
308
309 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
310 src/GLIArchitectureTemplate.py:
311 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
312 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
313 src/GLIPortage.py:
314 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
315 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
316 'resized' flag
317
318 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
319 src/GLIPortage.py:
320 short circuit and check vdb directly if package begins with '='
321
322 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
323 added more packages to extra_packages list in IP
324
325 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
326 src/templates/x86ArchitectureTemplate.py:
327 10 tries to create filesystem instead of 3
328 src/GLIPortage, src/GLIArchitectureTemplate.py:
329 ignore_missing flag for copy_pkg_to_chroot()
330
331 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
332 src/GLIPortage.py:
333 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
334
335 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
336 src/net/server/gliserv.py:
337 fix handling of 404 for real files
338 src/net/server/GLIServerProfile.py:
339 look for 'hostname' in attributes instead of 'name'
340
341 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
342 src/SimpleXMLParser.py:
343 initial support for 'include' in XML files
344 src/GLIStorageDevice.py:
345 initial support for %
346 src/GLIClientController.py:
347 add debugging statements to pre-install steps
348
349 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
350 webgli/configfiles:
351 check for key in etc_files['rc.conf'] to fix key error
352 webgli/timezone: small fix.
353 webgli/extrapackages: list-type fix
354 webgli/services: same
355 glimd: add/edit_client updates.
356
357 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
358 added configure.pyhtml to glimd. minor changes
359 to top and add_client. fixed up showargs.
360 added execute.pyhtml
361 changed register clients line in gliserv for name->hostname.
362 updated TODO.
363
364 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
365 src/net/server/*:
366 added add/del/edit client/profile.pythml for glimd.
367 updated templates, showclients, and gliserv.
368
369 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
370 src/net/server/*:
371 stupid threading module...
372
373 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
374 AT: rc.conf -> conf.d/clock
375
376 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
377 src/GLIPortage.py:
378 show 'Calculating dependencies for ...' in subprogress bar at beginning of
379 emerge()
380 src/GLIArchitectureTemplate.py:
381 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
382 in the chroot
383 remove _quickpkg_deps() and _portage_best_{visible,version}()
384 src/GLIUtility.py:
385 fail immediately in validate_uri() if provided URI can't be parsed
386 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
387 debug code in spawn()
388 use lower-level os.read() instead of file.read() because python sucks
389 src/templates/x86ArchitectureTemplate.py:
390 basic subprogress reporting for partitioning
391 total_steps was 1 too high
392
393 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
394 src/GLIUtility.py:
395 move parse_vdb_contents() to GLIPortage
396 src/GLIPortage.py:
397 remove all symlink fixups
398 ignore 'dir' entries in CONTENTS
399 call tar with -p
400
401 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
402 AT: bootsplash is now gensplash
403 gliserv: add advanced_mode to shared_info
404 webgli: Added advanced mode. mostly just disables a few screens.
405
406 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
407 src/GLIPortage.py:
408 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
409 added emerge()
410 update sub-progress after each package is emerged
411 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
412 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
413 remove link if it exists before moving content into place
414 src/GLIArchitectureTemplate.py:
415 install_packages() now calls emerge() in GLIPortage
416 change all calls to self._emerge() to self._portage.emerge()
417 comment out all emerge status checking...using exceptions now
418 call copy_pkg_to_chroot() directly for livecd-kernel
419
420 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
421 src/GLIArchitectureTemplate.py:
422 remove add_pkg_to_world() and copy_pkg_to_chroot()
423 copy installer.log to installer.log.failed on install failure
424 src/GLIUtility.py:
425 added get_keymaps()
426 spawn() takes any False argument for chroot instead of just None
427 src/GLIPortage.py:
428 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
429 change copy_pkg_to_chroot() to work properly with use_root=False
430 figure PORTAGE_TMPDIR properly
431
432 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
433 src/net/server/html/*:
434 converted showclients, load/saveprofile
435
436 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
437 src/GLIPortage.py:
438 exclude packages already in chroot vdb from binary deplist
439 chroot to use best_version for chroot's vdb
440 src/runtimedeps.py:
441 accept ROOT via commandline instead of env
442
443 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
444 src/runtimedeps.py:
445 remove passing of ROOT
446 src/GLIPortage.py:
447 modify get_deps() to get deptree for each package and merge into final list
448 remove depgraph class
449 add debugging code to get_deps()
450 src/GLIArchitectureTemplate.py:
451 combine code for GRP/compile in install_packages() into one block
452 debugging code in install_packages()
453
454 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
455 src/runtimedeps.py:
456 initial commit
457 src/GLIPortage.py:
458 use separate script for GRP deps
459 remove calls to portage module
460
461 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 src/GLIPortage.py:
463 initial commit
464 move some of portage function from GLIAT
465 flipped around a few function args
466 src/GLIArchitectureTemplate.py:
467 revamp install_packages() for new GLIPortage
468
469 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
470 src/GLIArchitectureTemplate.py:
471 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
472
473 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
474 src/net/server/gliserv.py:
475 wrap generated code in a class to isolate it a bit better
476 302 redirects work
477 don't use cgi.escape() for <% %>
478 src/net/server/html/webgli/*:
479 load/save profile
480 src/GLIUtility.py:
481 change /sbin/lspci to just lspci
482
483 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
484 src/GLIClientController.py:
485 change ordering of statements in CC run() while loop to not go past the end
486 of the array
487 src/GLIArchitectureTemplate.py:
488 removed redundant bind mounts
489
490 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
491 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
492 added a diagram by blackace from last night.
493 added the glossary in RTF format.
494
495 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
496 x86AT: separated out emerge/configure from running of bootloader
497 added MBR drive support to lilo.
498 these changes will likely not work.
499 AT: added setup_and_run_bootloader step.
500
501 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
502 src/net/server/gliserv.py:
503 call generated code in a function
504 src/net/server/html/webgli/*:
505 include top/bottom
506 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
507 src/GLIClientCongifuration.py:
508 install mode magic
509
510 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
511 src/GLIClientController.py:
512 use GLIException when there's an import problem
513 added debug code to show install_steps
514 src/templates/amd64ArchitectureTemplate.py:
515 add . to import path
516 proper path this time: ../../templates
517 src/GLIArchitectureTemplate.py:
518 add _portage_best_version() function
519
520 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
521 added initial glossary and gimli diagram to the docs directory.
522 modify gli-dialog to allow editing of the install_profile after loading XML.
523
524 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
525 src/net/server/html/webgli/:
526 converted globaluse, localuse, networkmounts, portagetree, and stageselection
527 moved saveclientconfig stuff into clientconfig
528 moved saveconfigfiles into config files
529 converted etc_portage and makedotconf
530 converted bootloader and kernel
531 convert daemons, extrapackages, networking, review, services, timezone, users
532 src/net/server/gliserv.py:
533 proper 404 handling for .pyhtml extension
534 HTML escape <% %> stuff
535 work around python's sucky regexes
536 src/GLIInstallProfile.py:
537 allow set_{rsync,ftp,http}_proxy() to accept empty values
538
539 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
540 src/net/server/gliserv.py:
541 initial commit of Legolas templating engine
542 302 redirects
543 src/net/server/html/index.html, src/net/server/webgli_template.html:
544 minor changes for new code
545 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
546 initial commit of the conversion from the monolithic WebGLIHandler.py to the
547 one file per path Legolas goodness
548 partitioning[2-4] done
549
550 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
551 webgli: dhcp options in CC and post-install.
552 updated comparison chart.
553 webgli: etc/portage/* and distcc support added. not too-well tested.
554
555 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
556 webgli_template.html: valign=top on left side.
557 webgli: fix bootloader boot_device. now working.
558 webgli: CC proxy done. post-install proxy in progress.
559
560 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
561 src/net/server/webgli_template.html:
562 increase padding for content cell to 7px and add colspan=2
563
564 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
565 webgli: added graphic bar on top
566 webgli: added hover effects on the links on the left
567 webgli: re-rendered header_bg.png to stretch without artifacts
568
569 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
570 webgli: make.conf disabling fixes for dynamic_stage3
571 fixed portage snapshot browse popup
572 all changes tested.
573 webgli: add debug mode to CC screen. the screen still needs lots of work.
574
575 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
576 added debug mode question to gli-dialog
577 added CC proxies to CC networking for gli-dialog
578 webgli: fixed skip CC networking if connection active
579 webgli: portage snapshot defaults to CD
580 webgli: bootloader mbr drive selection
581 webgli: USE flags unselectable if dynamic_stage3
582 webgli: manual extra packages and save button.
583
584 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
585 src/GLIUtility.py:
586 change ping count to 2
587 docs/comparison.html
588 initial commit
589
590 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
591 src/templates/x86ArchitectureTemplate.py:
592 fix map() issue with grub code
593 replace kernel_names and initrd_names loops with one-liners
594
595 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
596 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
597 initial gli-dialog support for recommended partitioning layout and clear.
598 failure cleanup now an option for gli-dialog.
599 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
600 added comparison list and updated TODO!
601
602 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
603 src/GLIArchitectureTemplate.py:
604 fix to stage1() debug code
605 fix to stage2() debug code
606
607 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
608 some more bootloader code fixes. forgot boot_device != mbr_device.
609
610 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/GLIStorageDevice.py:
612 fix to unallocated space merging when last one is after part 4
613
614 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
615 src/GLIArchitectureTemplate.py:
616 small fix to debugging code in copy_pkg_to_chroot()
617
618 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
619 more bugfixes with bootloader code
620 gli-dialog side appears to work
621
622 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
623 initial adding of boot_device to backend.
624 initial boot_device support added to gli-dialog.
625 some fixes of my poor coding
626
627 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
628 converted gli-dialog to use the install_package_list.
629 gtkfe has already been converted by AllanonJL
630 new way working in gli-dialog now and added to webgli.
631 added set/get_boot_device() to IP
632
633 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
634 get_install_package_list added to InstallProfile. This can be used by the FEs
635
636 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
637 src/templates/x86ArchitectureTemplate.py:
638 call ls with '-1 --color=no'
639
640 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
641 added warning (#9) to GRP ppl about stage3 tarballs
642
643 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
644 src/GLIArchitectureTemplate.py:
645 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
646 confused
647
648 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
649 removed protocols from rc.conf screens
650 finished initial rc.conf and make.conf in webgli
651
652 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
653 src/net/server/gliserv.py:
654 add -h option to usage()
655 show time and request URI in debug mode
656 show client IP in debug mode
657 just use IP instead of trying to do a reverse lookup
658
659 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
660 src/net/server/gliserv.py:
661 'classier' 401 message
662 proper commandline parsing
663 help via -h
664 user/pass can be specificed via commandline option
665
666 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
667 src/net/server/gliserv.py:
668 basic HTTP auth
669
670 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
671 src/net/server/gliserv.py:
672 dynamic module reloading (yipee!)
673 send 'Last-Modified' header for real files
674 respond to HEAD with just headers
675 src/net/server/handlers/WebGLIHandler.py:
676 icons for drives
677
678 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
679 src/net/server/handlers/WebGLIHandler.py:
680 initial 'pretty' partition table display support
681 clicking partition in 'pretty' display works instead of radio buttons
682 radio buttons and pretty display work together
683 META redirect instead of javascript
684 pretty display stretches across entire screen
685 'Recommended layout' and 'Clear drive' functions
686 properly catch exceptions from do_recommended()
687 src/GLIArchitectureTemplate.py:
688 replace preinst, copy, postinst, rm steps with qmerge
689 whoops...that shouldn't have been commented out
690 create image_dir with -p in copy_pkg_to_chroot()
691 more generic of symlink crappiness
692 new copy_pkg_to_chroot() actually works now
693
694 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
695 src/GLIStorageDevice.py:
696 initial generic disk support
697 fixes for add_partition() code
698 src/net/server/handlers/WebGLIHandler.py:
699 added support for creating generic disks
700 add new partition working
701 save and delete partitions
702
703 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
704 webgli: Partitioning making progress.
705
706 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
707 src/GLIArchitectureTemplate.py:
708 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
709 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
710 dir) and works around /etc/gconf symlink problem
711
712 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
713 webgli: lots of updates. preliminary partitioning. extra packages works.
714
715 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
716 src/net/server/gliserv.py:
717 httpd now supports HTTPS and falls back to HTTP if not available
718 make fallback actually work
719 src/net/server/SecureXMLRPCServer.py:
720 SecureSocketServer is now threaded
721
722 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
723 src/net/client/gliclient.py:
724 try to use HTTPS for XMLRPC first and fallback to HTTP
725 pretend mode
726 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
727 HTTPS XMLRPC goodness from samyron
728 pass name of certificate
729
730 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
731 wegli: daemons and services screens done.
732
733 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
734 webgli: networking and users screens
735 added return_redirect to handler.py
736 loading and saving install/client profiles works for webgli now
737 Review also done
738
739 *GLI-0.2 (27 Oct 2005)
740
741 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
742 src/templates/x86ArchitectureTemplate.py:
743 properly check for bootloader emerge exist status with exitsuccess()
744 log output of grub install command
745 add --batch --no-floppy to grub command
746 grubinstallstring only gets logged if debug is on
747 src/GLIUtility.py:
748 update progress bar to 100% when process finishes
749
750 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
751 src/GLIClientController.py:
752 added debugging code for the interaction between the 2 threads via Event()
753 src/GLIUtility.py:
754 doubled the buffer size in spawn()
755 bump buffer size up to 16384
756 only report progress in 5% increments
757 src/GLIArchitectureTemplate.py:
758 kernelpkgs.txt support code
759 above disabled because it sucks
760 added add_pkg_to_world()
761
762 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
763 src/GLIArchitectureTemplate.py:
764 use tar | tar to copy files in copy_pkg_to_chroot()
765 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
766
767 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
768 DEBUGGING ADDED TO AT. verbose field added to CConfig.
769
770 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
771 src/net/server/gliserv.py:
772 / maps to index.html
773 look for actual files in html/
774 src/net/html:
775 new template
776 src/GLIUtility.py:
777 added parse_vdb_contents()
778 src/GLIArchitectureTemplate.py:
779 added copy_pkg_to_chroot()
780 added debug code to dynamic-stage3
781 switch dynamic-stage3 to new method
782 lots of bug fixes from adding debug code
783
784 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
785 webgli initial bootloader support + changed make.conf.
786 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
787
788 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 src/GLIUtility.py:
790 horrible tangled mess of code that is tarball unpacking subprogress display
791 add unpack progress to portage snapshot
792 use read() instead of readlines() in spawn()
793 only update progress bar for whole percents
794
795 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
796 src/templates/x86ArchitectureTemplate.py:
797 change call to 'grub' to use GLIUtility.exitsuccess()
798 add definition of 'build_mode' in _configure_lilo()
799 src/misc/updategtkfe, src/misc/updateglid:
800 fix so subshell is called in root shell
801
802 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
803 src/net/server/handlers/WebGLIHandler.py:
804 stage screen launches URI browser in sized window with various properties set
805
806 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
807 src/misc/updategtkfe:
808 updated to actually work
809 remove previous snapshot and extracted dir before downloading
810 src/misc/updateglid:
811 updated to actually work
812 src/templates/x86ArchitectureTemplate.py:
813 fixed bug where grub code was looking for 'root+root+file_name2'
814
815 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
816 src/net/server/handlers/WebGLIHandler.py:
817 URI browser
818 added mirror selection
819 src/GLIUtility.py:
820 ls via ssh strips off ending *
821
822 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
823 more updates to webgli. stage selection.
824
825 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
826 updated webgli with preliminary Network Mounts support.
827
828 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
829 GenDialog: string formatting and yes/no label fixes.
830 added WebGLI template for gliserv.py
831 added WebGLIHandler as well as a definition for it in gliserv.py
832 updates to the webgli files even though they won't be there for long.
833 Utility: remove exception for non-existant grppkgs.txt until the new livecd
834 goes public.
835
836 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
837 src/net/server/gliserv.py:
838 override dict to not be so anal
839 main server now loads separate module to handle requests
840 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
841 split out profile URLs into separate handler function
842 move handlers into subdirectory
843 add Welcome and Clients handlers
844
845 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/GLIUtility.py:
847 raise exception if password prompt received twice
848
849 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
850 src/GLIUtility.py:
851 removed rot13ify()
852
853 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
854 src/net/server/gliserv.py:
855 allow for param to be passed multiple times in GET
856 no XMLRPC functions return None
857 modify POST request parsing to only create a list if needed
858 fix GET request parsing so the list creation for multiple values works
859 src/net/client/gliclient.py:
860 various typo and type mismatch fixes
861 exit after exception
862
863 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
864 src/net/client/gliclient.py:
865 initial commit
866 pass MAC to XMLRPC functions
867 src/net/server/GLIServerProfile.py:
868 rename GLIClientsProfiles to GLIServerProfile
869
870 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
871 src/net/server/gliserv.py:
872 now handles POST requests
873 move majority of request handling code to common_handler() to reduce code
874 duplication
875 profile loading
876 client reg via XMLRPC goes into SharedInfo()
877 /showclients redesign
878 template fixes
879 allow handler functions to add/change headers
880 save profile
881
882 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
883 src/net/server/GLIClientsProfiles.py:
884 initial commit
885 src/net/server/template.html:
886 initial commit
887 src/net/server/gliserv.py:
888 add template mojo
889
890 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
891 src/net/server/gliserv.py:
892 XMLRPC mojo
893
894 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
895 src/GLIArchitectureTemplate.py:
896 add code in _edit_config() to comment line where variable is defined
897 previously
898 insert new line under previous definition of variable if it exists
899 small _edit_config() cleanup
900 src/GLIStorageDevice.py:
901 add clear_partitions() function
902 new sizes for recommended partition layout
903 automatically calculate swap size for recommended layout
904
905 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/templates/x86ArchitectureTemplate.py:
907 fat16 mojo
908
909 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
910 src/GLIStorageDevice.py:
911 prevent do_recommended() from being run twice
912 rewrite do_recommended() to be more robust
913 src/GLIArchitectureTemplate.py:
914 rework _edit_config() to not write duplicate entries
915
916 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
917 src/GLIStorageDevice.py:
918 added do_recommended() function to automatically created 256M/1G/* layout
919
920 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
921 src/gli-dialog.py: added set_distcc to the list
922 GenDialog: added set_distcc. untested.
923 IP: added install_distcc flag.
924 AT: added install_distcc function based on the flag. runs after build_kernel
925 changed AT spawn command for distcc for nodeps.
926
927 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
928 src/GLIUtility.py:
929 add rot13ify() function
930
931 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
932 src/GenDialog.py:
933 added a sentence of text. unchecking support added.
934
935 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
936 src/GLIUtility.py:
937 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
938 src/GenDialog.py:
939 still working on extra_packages. transformed the list to new format.
940 added GRP indication to list. untested.
941 TODO lists updated.
942 src/fe/dialog/gli-dialog.py:
943 spelling mistook.
944
945 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
946 src/GLIUtility.py:
947 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
948
949 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
950 src/GLIUtility.py:
951 add get_directory_listing_from_uri()
952 add http support to above
953 add ftp support to above
954 add scp support to above
955 src/GLIArchitectureTemplate.py:
956 "0" instead of 0 for key of single-element dict passed to _edit_config()
957
958 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
959 value_only -> only_value
960
961 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
962 gutted out all of etc_portage structure since it is now all handled by
963 etc_files
964
965 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
966 src/GLIArchitectureTemplate.py:
967 install_packages() sends progress update notifications
968 src/templates/x86ArchitectureTemplate.py:
969 increase sleep to 5s between format tries
970 src/GLIClientController.py:
971 pass 'self' to AT instead of 'self._pretend'
972
973 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
974 logger -> logger.log in x86AT
975
976 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
977 added set_etc_portage to IP. debugging gli-d's support for it.
978
979 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
980 src/templates/x86ArchitectureTemplate.py:
981 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
982
983 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
984 src/GLIArchitectureTemplate.py:
985 add _portage_best_version() function and rework install_packages() to allow
986 for future X of Y tracking
987 Use best_visible instead of best_version
988 tracked down and fixed missing = causing empty install extra packages
989 use = when emerging also
990 quickpkg hokey pokey
991 run _get_packages_to_emerge() again with -pk
992
993 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
994 src/ArchTemplate:
995 removed install_xorg_x11, and put the xorg.conf copying at
996 the end of install_packages.
997 added updateglid to /src/misc
998 updated all core files with new GPL notice and copyright statement.
999
1000 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1001 src/GLIUtility.py:
1002 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1003 a snapshot in /mnt/cdrom/snapshots/
1004 get_snapshot_from_cd() adds file:// at the beginning
1005 change calls to extra package special case functions to 'self.blah'
1006
1007 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1008 src/ArchTemplate: changed "voodoo".
1009 changed order of portage sync methods. made a fallback to webrsync if
1010 normal emerge sync fails.
1011 removed get_sources_from_cd because it is obsolete.
1012 add special cases to install_packages. remove fatal exception on package
1013 install failure b/c the box will still be bootable.
1014 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1015 handled in the FEs.
1016 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1017 awaiting testing.
1018
1019 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1020 src/GLIStorageDevice.py:
1021 global try/except block around fs resizable detection code
1022 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1023 install-failed cleanup function
1024
1025 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1026 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1027
1028 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1029 GLIGenDialog:
1030 add drive choices for loaded configs.
1031 force snapshot for dynamic_stage3
1032 init the snapshoturi input to the cd snapshot if not already selected.
1033 if dynamic_stage3, skip the make.conf step.
1034 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1035 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1036
1037 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1038 src/GLIArchitectureTemplate.py:
1039 manually call MAKEDEV in stage3-dynamic code
1040 copy /etc/inittab.old to /etc/inittab in chroot
1041 src/GLIUtility.py:
1042 add beginning of validate_uri() function
1043 add file:/// support to validate_uri()
1044 single quotes when setting livecd password
1045
1046 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1047 src/GLIGenDialog.py:
1048 change getmountpoint() to get_mountpoint()
1049 src/misc/updategtkfe:
1050 committed script to automatically download latest snapshot and run gtkfe
1051 src/templates/x86ArchitectureTemplate.py:
1052 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1053 src/GLIArchitectureTemplate.py:
1054 give tmp_minor an initial value in mount_local_partitions so that the value
1055 remain from the previous drive
1056
1057 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1058 src/templates/x86ArchitectureTemplate.py:
1059 Fix _configure_lilo() for IP using GLISD stuff
1060 src/GLIArchitectureTemplate.py:
1061 install_cron_daemon() treats "none" specially
1062
1063 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1064 old patch from Steven Mertens to resolve bug #96642
1065 numerous asthetic changes to GenDialog, no real functionality changes though.
1066 strings renamed for global use if necessary.
1067 fix all three parts of bug 102291
1068 disable set_etc_portage until fully-written.
1069
1070 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1071 src/GLIClientController.py:
1072 lower-case http/ftp proxy envvars
1073
1074 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1075 src/GLIClientController.py:
1076 log end of pre_install steps to aid in debugging
1077 src/templates/x86ArchitectureTemplate.py:
1078 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1079
1080 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1081 src/GLIArchitectureTemplate.py:
1082 check to make sure that the device node we're wait for to exist isn't of
1083 type 'free'
1084
1085 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1086 src/GLIGenDialog.py:
1087 convert install_packages to list in set_extra_packages()
1088 check return code of checklist() call in "Manual" section
1089 *actually* fix the first problem
1090
1091 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1092 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1093 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1094
1095 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1096 src/GLIArchitectureTemplate.py:
1097 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1098
1099 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1100 Add CDATA support to SimpleXMLParser and add utility functions for it.
1101
1102 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1103 src/GLIArchitectureTemplate.py:
1104 Fix case where vixie-cron is specified as a full package atom, as we still
1105 don't want to run 'crontab /etc/crontab' for it.
1106
1107 *GLI-0.1 (3 Aug 2005)
1108
1109 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1110 add scp to list of is_uri() so GenDialog doesn't complain.
1111 fixed livecd-kernel bug in bootloader code.
1112 fixed gendialog for dynamic_stage3 instead of "networkless"
1113 change bootloader to allow for both initrd and initramfs.
1114 fix IP for dynamic_stage3.
1115 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1116
1117 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1118 Added full scp:// URI support to get_uri() in GLIUtility
1119 Remove "networkless" from dynamic stage3 if locic.
1120 Remove print statement from scp:// code.
1121 Change scp code to check for "assword: " instead of "Password:"
1122 Fix post-install network code to create net.eth1+ symlink correctly
1123 Check to make sure pkg can be split on / and some debugging code
1124 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1125 SimpleXMLParser handles True/False/None correctly now
1126 Comment out above fix
1127 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1128
1129 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1130 Removed a FIXME in the GLIClientConfiguration that is no
1131 longer needed.
1132
1133 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1134 Default to x86 in ClientConfig
1135 Typo in build-a-stage3 code.
1136 Remove MAKEDEV call in build-a-stage3 postscript.
1137
1138 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1139 Rewrote init of IP for gli-d. Other GenDialog updates.
1140 allow network_type to be None in CConfig.
1141
1142 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1143 Add _dynamic_stage3 option to IP.
1144 Add check for that option to dynamic stage3 code in ArchTemplate.
1145 Fix code to determine default route in get_eth_info() in GLIUtility.
1146 Fix serialization of dns-servers in ClientConfig.
1147
1148 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1149 changed default values of cron/logger in IP.
1150 moved GenDialog IP init out to the individual files. gli-dialog's version
1151 will change quite a bit.
1152
1153 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1154 added ppcArchTemplate. blank now. working on yaboot.
1155 modified ArchTemplate for amd64 and ppc custom kernels.
1156 skeleton implementation of _configure_yaboot.
1157 small fixes to other templates.
1158
1159 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1160 GenDialog updates. changed comment in IP.
1161
1162 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 src/GLIInstallProfile.py:
1164 Fix codeman's screwup of changing the service seperator to ',' in the parser
1165 without changing it in the serialization code! Also document this in a
1166 comment so you find it easier. Everybody needs to make sure they update
1167 their install profiles!
1168
1169 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1170 src/GLIArchitectureTemplate.py:
1171 Fix casting of list to string and concat of None with string, as well as
1172 commented prototype of checking that mounting actually worked (found a case
1173 where mount can return success, but the mount won't be done).
1174
1175 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1176 src/templates/x86ArchitectureTemplate.py:
1177 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1178 checking for the device, and sleeping 1 second each time.
1179
1180 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1181 src/templates/x86ArchitectureTemplate.py:
1182 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1183 bootloader works again. Also rename _install_{grub,lilo} to
1184 _configure_{grub,lilo} since they don't install the loaders anymore
1185 themselves.
1186
1187 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1188 fix global USE flags to not include the arch types at the end.
1189 updates to GenDialog and gli-d.
1190
1191 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1192 fixing bootloader code for no initrd and initrd->initramfs naming change.
1193
1194 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1195 Proper comments and parameters to GLIException in install_mta()
1196 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1197 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1198 list_tarball_from_mirror() to eliminate blank last item.
1199
1200 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1201 Added stage3 generation code.
1202
1203 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1204 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1205 Mild changes to GenDialog.
1206
1207 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1208 Remove separate install step configure_rc_conf() since it's handled by
1209 update_config_files()
1210 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1211 function is called twice on the same file.
1212
1213 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1214 Missing \ in sed in _get_packages_to_emerge()
1215 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1216 Check in _quickpkg_deps() to ignore blank package names returned from
1217 _get_packages_to_emerge()
1218
1219 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1220 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1221 in the dialog.py gauge code.
1222
1223 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1224 Add code to update_config_files() to go through etc_files and update stuff.
1225 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1226 Only use float() in partition xml parsing code if type == "free"
1227
1228 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1229 finished almost all internationalization of GenDialog.
1230 attempt at fixing rc.conf function. moved 3 generate functions out of
1231 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1232 added dialog.py to the fe/dialog directory so it actually gets used.
1233
1234 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1235 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1236
1237 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1238 fix extra entry in list_mirrors()
1239 beginning internationalization runthrough.
1240
1241 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1242 added dialog.py to /src temporarily until it gets accepted upstream.
1243 fix for unused value in form in dialog.py and changed heights.
1244 fix GenDialog forms.
1245
1246 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1247 Changed hostname/domainname for new baselayout.
1248 Changed _add_to_runlevel errors to logs.
1249 Updated TODO list to show status of GenDialog
1250 More updates to GenDialog including two checklists that probably won't work.
1251 update IP to use comma-separated list instead of space separated for services.
1252
1253 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1254 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1255 GenDialog as it gets closer to completion.
1256
1257 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1258 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1259 instead of int() in add_partition_device_partition() for minor (closes 96804)
1260
1261 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1262 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1263 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1264 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1265
1266 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1267 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1268 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1269 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1270 Fix undefined variable 'output' issue in spawn().
1271
1272 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1273 More updates to GenDialog and gli-d.
1274
1275 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1276 Modify list_mirrors() to return a list of mirror URL/name pairs.
1277
1278 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1279 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1280 get subarch.
1281
1282 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1283 Backend partitioning will create disklabel is none exists. Installprofile
1284 defaults to "" now instead of "msdos" for disklabel type. Fix for
1285 mount_local_partitions() to remember device along with minor in the
1286 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1287 add else block to log unsupported netmount types to mount_network_shares()
1288
1289 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1290 src/GLIArchitectureTemplate.py:
1291 Refactor kernel_compile common stuff, fix 2.4 build process.
1292 src/fe/cli/clife.py:
1293 Logging system.
1294 src/GLIUtility.py, src/GLIStorageDevice.py:
1295 Add comments about re-writes needed for boxes without sysfs.
1296
1297 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1298 src/GLIArchitectureTemplate.py:
1299 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1300 'make dep' call for custom compile. build_mode support for prepare-only and
1301 none types completed. custom compile function chains shell functions in
1302 spawned script, to allow for catching all errors.
1303
1304 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1305 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1306 and GenDialog. other gendialog updates as well. kernel updates untested.
1307
1308 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1309 src/GLIInstallProfile.py:
1310 Change structure of etc-portage stuff. The serialization was broken before my
1311 last commit, and I am the only person that's ever used it. The new schema is
1312 as follows:
1313 <etc-portage>
1314 <file name="package.mask"/>
1315 <file name="package.unmask">
1316 <entry atom="sys-kernel/openmosix-sources"/>
1317 </file>
1318 <file name="package.use">
1319 <entry atom="sys-libs/db">
1320 -java
1321 </entry>
1322 <entry atom="dev-libs/cyrus-sasl">
1323 -ldap
1324 </entry>
1325 </file>
1326 </etc-portage>
1327
1328
1329 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1330 src/GLIInstallProfile.py:
1331 Add new entry for gli-profile/kernel-build-method item. Add missing
1332 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1333 keys in the same order.
1334
1335 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1336 src/GLIArchitectureTemplate.py:
1337 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1338 was repeatedly appended to make.conf.
1339
1340 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1341 src/GLIArchitectureTemplate.py:
1342 Put some Linux-2.6 specific code under a if statement. Store list of
1343 successfully mounted swap device for using swapoff. Add proper error checking
1344 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1345 'file'. Clean up some redundant code (thanks to pychecker).'
1346
1347 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1348 Fix typos: get_extended() instead of get_extended_partition(). Added
1349 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1350 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1351
1352 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1353 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1354 in add_network_interface.
1355
1356 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1357 src/GLIArchitectureTemplate.py:
1358 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1359 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1360 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1361 prepare_chroot.
1362
1363 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1364 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1365 +src/fe/installer-gtk:
1366 Add new automated CLI frontend. Add scripts that are the intended means to
1367 use each frontend.
1368
1369 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1370 src/GLIClientController.py:
1371 Add null type to network config, for cases where the interface is already up
1372 and should not be touched (netboot for example).
1373
1374 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1375 src/GLIArchitectureTemplate.py:
1376 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1377 string!. Try to use binary packages if available by default.
1378
1379 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1380 src/GLIArchitectureTemplate.py:
1381 More error checking for _add_to_runlevel, to ensure that the init script
1382 actually exists before we try to add it. set_services phase must take place
1383 after the package installation, otherwise the init scripts might not exist.
1384 Find the correct init script for the cron and logging daemons, and add that
1385 instead of the package atom.
1386
1387 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1388 src/GLIArchitectureTemplate.py:
1389 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1390 usage of 'file' to 'contents' for the variable name, as it shadows
1391 __builtin__.file.
1392
1393 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1394 src/GLIArchitectureTemplate.py:
1395 Add MTA install code, and include MTA install phase. Ensure
1396 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1397 for 'none' kernel config for build_kernel phase. Put kernel_script in
1398 /var/tmp instead of /root for build_kernel phase.
1399
1400 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1401 Rename mta variables to match syslog/cron variables.
1402
1403 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1404 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1405 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1406 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1407 src/templates/.cvsignore, src/tests/.cvsignore:
1408 Refactor partition formatting again to include error checking. Allow 'none'
1409 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1410
1411 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1412 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1413 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1414 only have a single spawn call.
1415
1416 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1417 refixed samyron's fix of set_architecture_template.
1418
1419 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1420 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1421 be executable.
1422
1423 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1424 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1425 error checking when you call set_architecture_template.
1426
1427 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1428 moved the mkfsopts input to the partition options menu instead of the during
1429 the creation process. updated GenDialog to say it supports reiserfs v3.
1430
1431 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1432 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1433 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1434 Add support for other partition types to dialogfe.
1435 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1436 avoid integer overflows and wraparounds.
1437
1438 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1439 Removed start/end from XML output and added mkfsopts to partitioning info.
1440 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1441 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1442 in GLIClientConfiguration. Change from .1 and .9 to constants for
1443 partitioning. Fix free space overwriting bug. Remove a few unused functions
1444 from rewrite. Fix call to get_partition_at()
1445
1446 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1447 Updates to GenDialog and dialogfe.
1448
1449 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1450 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1451
1452 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1453 more GenDialog updates to partitioning.
1454
1455 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1456 Indenting issue in GLISD/get_ordered_partition_list.
1457 updates to GenDialog partitioning and added default UTC for timezone in IP.
1458
1459 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1460 Added GLISD.get_model()
1461
1462 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1463 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1464 More updates to GenDialog :)
1465
1466 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1467 Added get_interface_realname() function.
1468
1469 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1470 Added auto-save of CConfig and copying to new /root after install.
1471 yet even more GenDialog updates.
1472
1473 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1474 removed print statement from GLISD. more updates to GenDialog.
1475
1476 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1477 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1478 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1479 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1480 places in GLIClientConfiguration.
1481
1482 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1483 Fix mount_local_partitions(), configure_fstab(), and
1484 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1485 A few more fixes for templates/x86Archtemplate
1486
1487 27 May 2005; Preston Cody <codeman@gentoo.org> :
1488 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1489 a work in progress.
1490
1491 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1492 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1493 directly. GLISD can now handle data imported from XML.
1494
1495 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1496 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1497 handle blank (no disklabel) disks.
1498
1499 20 May 2005; Preston Cody <codeman@gentoo.org> :
1500 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1501 up, documented, and separated out serialization and grouped all sections.
1502
1503 19 May 2005; Preston Cody <codeman@gentoo.org> :
1504 Reorganization of ClientConfiguration and gutting of unused functions.
1505 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1506
1507 18 May 2005; Preston Cody <codeman@gentoo.org> :
1508 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1509
1510 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1511 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1512 partitioning. CC serializes install profile to disk and prepare_chroot()
1513 copies it into /mnt/gentoo/root
1514
1515 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1516 Moved URI parsing into new function parse_uri()
1517
1518 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1519 Added XMLParser module.
1520
1521 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1522 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1523 Minor fix to is_uri() regex to allow hyphens in hostname.
1524
1525 12 May 2005; Preston Cody <codeman@gentoo.org> :
1526 Updated finishing_cleanup for new unmounting method from agaffney.
1527
1528 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1529 Fix GLILogger to use correct time format string. Fix _edit_config() to
1530 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1531 unicode support to is_realstring().
1532
1533 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1534 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1535 return value instead of non-zero. Add code to output a traceback to the
1536 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1537 instead of --nocolor.
1538
1539 10 May 2005; Preston Cody <codeman@gentoo.org> :
1540 Added GLIGenDialog.py to make a generic class for the dialog functions that
1541 can be used by both dialogfe and the netfe/be. updated both for new filename.
1542 date changes. 2004->2005.
1543
1544 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1545 Removed 'quiet=True' from spawn() calls
1546
1547 10 May 2005; Preston Cody <codeman@gentoo.org> :
1548 Updated GLIUtility with patches from chotchki. Also added documentation
1549
1550 9 May 2005; Preston Cody <codeman@gentoo.org> :
1551 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1552 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1553 from bug #89683, mostly touchups.
1554
1555 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1556 GLIStorageDevice cleanup patch from bug #91761
1557
1558 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1560 _edit_config(). Error logging casts 'error' to str
1561
1562 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1563 Exceptions received in CC are logged before being passed to the FE. Added
1564 code to CC to handle exceptions *not* thrown by the installer itself.
1565
1566 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1567 get_max_mb_for_resize() returns -1 if not self.resizeable
1568
1569 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1570 More dirty rsync hacks :-/
1571
1572 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1573 Patches from chotchki (bug #90325) to improve CC networking. untested.
1574
1575 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1576 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1577 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1578 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1579 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1580 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1581 _get_packages_to_emerge()
1582
1583 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1584 Added group-adding code to set_users in ArchTemplate
1585
1586 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1587 Added post-install script code
1588
1589 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1590 Fixed encapsulation issues in GLIClientController (bug #90141)
1591
1592 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1593 Update resizing code in GLIStorageDevice
1594
1595 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1596 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1597
1598 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1599 Reverted change to ArchTemplate and added support for commented line in old
1600 code.
1601
1602 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1603 Changed _edit_config() to modify value in-place instead of commenting out and
1604 adding the new value to the end of the file.
1605
1606 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1607 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1608 Also updated TODO list.
1609
1610 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1611 Use blackace's one-liner to add comments for all function for use with
1612 pythondoc.
1613
1614 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1615 Moved 'end >= device_sectors' check out of loop to check for next partition's
1616 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1617 Partitioning code now tracks start/end of extended for placing logicals. End
1618 point of logical is now adjusted along with start.
1619
1620 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1621 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1622 the way of partitioning from a blank disk. Add int() around access to minor
1623 key in partition information due to new partition code leaving them as float.
1624
1625 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1626 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1627
1628 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1629 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1630
1631 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1632 Added support for DHCP options and MAC addresses in the InstallProfile.
1633
1634 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1635 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1636 sed to properly strip out junk.
1637
1638 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1639 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1640 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1641
1642 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1643 Fixed indent problem in GLICController
1644
1645 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1646 Check for disklabel type "loop" and use the device name without a minor.
1647
1648 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1649 Remove /tmp/compile_output.log and /var/log/install.log when install is
1650 complete. Added code to (hopefully) keep 2nd thread running after install.
1651 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1652 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1653 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1654
1655 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1657 when unpacking tarball.
1658
1659 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1660 rewrote filesystem_tools. looks like it works so ripping out all the old
1661 filesystem_tools code.
1662
1663 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1664 Changed the print statements to logging in the partitioning BE code.
1665 the logger may need to be imported to the x86archtemplate. unknown yet.
1666 Added the finishing_cleanup function.
1667 added a fix to the logger from BenUrban
1668
1669 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1670 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1671 URIs. The blank uri check has been commented out.
1672 ripped out error checking of set_services. this is done by _add_to_runlevel.
1673
1674 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1675 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1676
1677 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1679 the install profile if available. Commented out spawn() debugging prints
1680
1681 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1682 small changes to setup_network_post. moved adding to runlevel of net.x to
1683 after the device gets symlinked. added domainname runlevel command.
1684
1685 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1686 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1687 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1688 spawn() call in livecd-kernel code to pass environment variables.
1689 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1690 the install profile if available.
1691
1692 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1693 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1694 to handle installing the livecd kernel into the new system.
1695
1696 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1697 should emerge hotplug and coldplug before adding them to runlevel.
1698
1699 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1700 took chroot out of grub_install command.
1701
1702 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1703 Changed chroot wrapper code in spawn() to write the wrapper the python way
1704 instead of the bash way to avoid quote conflicts. Added
1705 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1706 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1707 as it breaks the piping.
1708
1709 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1710 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1711
1712 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1713 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1714 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1715 GLIInstallProfile.
1716
1717 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1718 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1719 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1720 into /mnt/gentoo in prepare_chroot()
1721
1722 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1723 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1724 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1725 to start/end sectors
1726
1727 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1728 Add 2>&1 to cmd in spawn()
1729
1730 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1731 Modified GLIUtility.exitsuccess() to work with return value from
1732 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1733 creates wrapper script for commands run inside chroot so multiple commands
1734 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1735 for the generated script from spawn()
1736
1737 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1738 Removed default values for stage tarball URI and portage tree URI from
1739 InstallProfile. These should be set by the FEs. also added services step to
1740 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1741 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1742
1743 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1744 Small fix for setting the default gateway. Also added feature to dialogfe.
1745
1746 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1747 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1748
1749 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1750 Fixed a bunch of true -> True typos. lots of em
1751 only write new resolv.conf if there are dns servers listed.
1752
1753 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1754 Commented out 'display_on_tty8=True' in start_portmap()
1755
1756 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1757 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1758
1759 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1760 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1761 lang parameter to __init__()
1762
1763 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1764 updates to TODO list.
1765
1766 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1767 Initial code for quickpkg GRP support. Fix loop to grab packages from
1768 'emerge -p blah'
1769
1770 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1771 check for dhcp in the network stuff and emerge it if it is.
1772 added quickpkg to TODO list
1773
1774 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1775 Changed the raising of 'warning' exceptions to a simple log of the error
1776 so that the installer can continue.
1777
1778 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1779 Some big changes. First, changed most output to display_on_tty8.
1780 Second, added log lines to all templates. Some smaller fixes such as typos.
1781 Also did some cleanups of old commented lines.
1782
1783 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1784 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1785 Undo change with fix. Escaping fix in GLIStorageDevice.py
1786
1787 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1788 more updates to TODO list. hopefully we'll soon start removing items instead
1789 of adding them.
1790
1791 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1792 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1793
1794 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1795 updated TODO list. (again)
1796
1797 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1798 changed output of portmap start to display_on_tty8.
1799 fixed bootloader for udev and multiple kernels
1800 fixed custom kernel config (again)
1801
1802 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1803 changed default value of CC._enable_ssh to True because this is smart.
1804 added code to allow custom kernel .config. may be unstable and break. sorry.
1805
1806 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1807 partition() now waits until after it checks for partition flags before delete
1808 the partitions :P
1809
1810 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1811 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1812 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1813 blank.
1814
1815 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1816 Various fixes related to the add_users function. Still not yet finished.
1817 Added things to the TODO list. Lets start using that!
1818
1819 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1820 Added code to x86Template to format newly created partitions. Also added
1821 some error checking code. GLIStorageDevice passes 'minor' with data to
1822 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1823 mounting code.
1824
1825 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1826 Took out unnecessary setting of random livecd root password. the cd already
1827 sets it randomly.
1828
1829 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1830 Took out an unneeded step from CC's run()
1831
1832 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1833 Attempt at detecting and adding windows partitions to lilo.
1834
1835 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1836 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1837 partition. fixed misc exit_status => exitstatus typo.
1838
1839 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1840 Added basic code for resizing filesystems with pyparted. Fixed code for
1841 resizing ntfs and ext2/3.
1842
1843 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1844 Fixed partition() in x86Template so that it scans through logicals and deletes
1845 before deleting containing extended partition. Also clears partition table to
1846 be safe before third pass.
1847
1848 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1849 Added mount_network_shares. not able to test it from this computer.
1850 will test when i get back to school.
1851 also added start_portmap to the client_controller as an always-do.
1852 agaffney says this is needed for NFS mounts to work.
1853
1854 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1855 Partial rewrite of partitioning code in x86Template. No longer shells out to
1856 parted to perform actions, now uses all pyparted calls. Code "works" in a
1857 test, but still needs lots of TLC. Also modified tests/install.py to work
1858 with x86Template and GLIClientConfiguration.
1859
1860 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1861 Initial move of partitioning code from ArchTemplate to x86Template.
1862
1863 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1864 Added grp_install and services to InstallProfile. forgot about the set_root_password
1865
1866 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1867 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1868 agaffney. Test Install ran very well (skipping partitioning).
1869
1870 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1871 My mid-day update. rewrote mount_local_partitions for order of mounting.
1872 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1873 partition format. fixed a few _edit_configs. some may still have eluded me.
1874
1875 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1876 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1877 to test it.
1878 Just finished mount_local_partitions in GLIArchitectureTemplate
1879
1880 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1881 Added get_num_sectors() to GLIStorageDevice.
1882
1883 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1884 GLIStorageDevice now tracks partition boundaries in sectors instead of
1885 cylinders.
1886 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1887 from GLIInstallProfile.
1888
1889 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1890 GLIStorageDevice returns "unknown" instead of "" for get_type()
1891
1892 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1893 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1894 actually work. Commented out resizability checking code for speed.
1895
1896 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1897 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1898 in GLIStorageDevice at the suggestion of plors
1899
1900 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1901 Added a function to GLIUtility to pull a value from a make.conf-style config
1902 file. Minor type fix to GLIInstallProfile.py
1903
1904 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1905 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1906 Separated network mounts from partition data structure in GLIInstallProfile
1907
1908 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1909 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1910 can be resized.
1911
1912 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1913 Added some of the final functions to GLIInstallTemplate.
1914 Yes this project is still active despite rare use of the Changelog!
1915
1916 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1917 Added the GLIPartitionTools.py file. This is a temporary insertion of
1918 partitioning tools that will eventually go into their own package.
1919
1920 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1921 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1922 run-time for the program). Added __init__(install_profile,
1923 client_configuration) to GLI.InstallProfile. This sets install_profile and
1924 client_configuration once so as to avoid constantly passing stuff every time
1925 we call a method.
1926
1927 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1928
1929 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1930 config files without messing up all the other stuff in them. This will be
1931 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1932
1933 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1934
1935 Added GLI.InstallTemplate framework. This is not yet functional. However,
1936 it does have a few basic things. I added two private methods. One is
1937 _depends(). This will be used for dependency checking (ie. unpacking a
1938 tarball requires that partitioning has been done). The other is
1939 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1940 instead of being run in the liveCD environment, it runs in the chroot. This
1941 requires a bit of fork() magic, so I isolated the code. Hope to work more
1942 this week to get this class formed...
1943
1944 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1945 Added SAX parsing. Made GLI.InstallProfile a subclass of
1946 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1947 to be lists instead of tuples to allow for easier modification (mutable,
1948 rather than immutable objects). Updated existing pydoc and added more.
1949 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1950 GLI.py a bit. Fixed all accessors to use self references.
1951 Added initial unit test code.
1952
1953 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1954 Added initial changelog. Setting up the basic structure of the CVS repository
1955 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1956 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20